NORMA Brass cases

For more than 100 years, the golden rule at NORMA has been precision and quality in everything we make. NORMA brass has long been a household name for cases in a league of their own, made of the best possible raw materials with the narrowest tolerances ensuring long life and many reloads. See our full range on www.norma-ammunition.com

TOLERANCES

In-house tooling production allows NORMA to not only control tolerances of the finished product, but of the production tools and machines themselves. With tooling tolerances down to 7 thousandths of a millimeter, NORMA is proud to have the tightest tolerances in the industry.

NECK

Annealed to achieve proper elasticity and prevent splitting, NORMA Cases are then put through a final polish process to ensure superior appearance in addition to superior performance.

SHOULDER

NORMA applies over a century of experience and proprietary tooling to ensure dimensionally perfect headspace.

PRIMER POCKET

Proper hardness of the primer pocket is critical to long case life. At NORMA, each production run is tested to a minimum of ten reloading cycles.

BODY

Laboratory inspection ensures proper hardness over the length of the case; softer at the neck, getting progressively harder toward the case head.

FLASH HOLE

Three quality control inspections for the flash hole ensures a perfectly centered and burr free product. Benchrest quality in every case.