BEGA 2012-2014 (2)

Page 1

Square or round in-ground floodlights with LEDs or for low voltage tungsten halogen lamps, either as • location luminaires • floodlights Protection class IP 68 10 m · Safety class I 1 8087 · 8084 · 8043 · 8044 8083 · 8088 · 8042 · 8058 Safety class III 3 Cast stainless steel and stainless steel Location luminaires · White safety glass Floodlights · Clear safety glass with built-in louvre Reflector of pure anodized aluminium 1 cable gland for connecting cable Ø 9 -13 mm · 2,59 connecting terminal 8696 · 8697 · 8698 · 8699 2 cable glands LED luminaires colour temperature 5500 K · with power supply unit 85 to 265 V y50/60 Hz

Square in-ground floodlights LED location luminaires

b Lumen

8696 8697

– –

25 50

25° 909 909 95 25° 1109 909 95

– – –

60 130 130

40° 909 909 95 70° 1109 909 110 70° 1109 909 160

w/o transformer 10° w/o transformer 12° w/ transformer 12°

130 320 320

90° 909 909 95 130° 1109 909 110 130° 1109 909 160

1 LED 1 LED

3 W w/ pow. suppl. unit 5 W w/ pow. suppl. unit

T

A

B

C

Location luminaires

8087 8084 8097

1 QT 9-ax 5 W 1 QT 9-ax 10 W 1 QT 9-ax 10 W

w/o transformer w/o transformer w/ transformer

Floodlights

8043 8044 8344

A

1 QT 9-ax 10 W 1 QT 9-ax 20 W 1 QT 9-ax 20 W

C

Round in-ground floodlights LED location luminaires

b Lumen

8698 8699

– –

25 50

25° Ø   90 909 95 25° Ø 110 909 95

– – –

60 130 130

40° Ø   90 909 95 70° Ø 110 909 110 70° Ø 110 909 160

w/o transformer 10° w/o transformer 12° w/ transformer 12°

130 320 320

90° Ø   90 909 95 130° Ø 110 909 110 130° Ø 110 909 160

1 LED 1 LED

3 W w/ pow. suppl. unit 5 W w/ pow. suppl. unit

T

A

B

C

Location luminaires

8083 8088 8094

1 QT 9-ax 5 W 1 QT 9-ax 10 W 1 QT 9-ax 10 W

w/o transformer w/o transformer w/ transformer

B

Floodlights

8042 8058 8054

1 QT 9-ax 10 W 1 QT 9-ax 20 W 1 QT 9-ax 20 W

b = half beam angle

301


Drive-over in-ground floodlights for installation in round cut-outs Installation depth 110 - 205 mm Pressure load 2000 kg Protection class IP 68 Location luminaires and floodlights with symmetrical or adjustable light distribution. A new development, specially designed for indoors and outdoors to ensure the safe installation of luminaires in the ground with mounting holes prepared by the customer. Luminaires of this type are suitable for installation in core holes or cut-outs in elevated floors. The patented mounting system allows fast, safe and precise positioning of the luminaires. Vehicles with pneumatic tyres can drive over the luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. Please note: The operating temperatures (T) given in the table are the temperatures attained in the centre of the glass surface (according to EN 60 598 ambient temperature ta 15 °C). The infrared filters shown reduce the respective surface temperatures by about 20 %. All exact temperatures and important technical data are given in the instructions for use for these luminaires.

m

4

2

0

2

4

m

9

9

7

7

3

E

3

1

8806

1

1 HIT-TC-CE 20 W 100 200 300 400 500 lx

4

2

0

2

4

m

9

9

7

7

5

m

E

3

8808

1

1 HIT-TC-CE 20 W 300 600 900 1200 1500 lx

4

2

0

2

4

m

9

9

7

7

5 3 1

0

2

4

E

8807

1 HIT-CE 35 W 160 320 480 640 800 lx

4

2

0

2

4

5

3 1

2

5

5

m

4

E

8814

1 HIT-TC-CE 20 W 300 600 900 1200 1500 lx

4

2

0

2

4

5 E

8809

1 HIT-TC-CE 35 W 200 400 600 800 1000 lx

E 3 1

8819

1 HIT-TC-CE 35 W 300 600 900 1200 1500 lx


symmetrical

adjustable

In-ground floodlights either as • location luminaires • symmetrical floodlights • adjustable floodlights Protection class IP 68 10 m Frame ring and luminaire housing made of stainless steel · Safety glass Reflector of pure anodized aluminium 8814 · 8819 narrow beam · with built-in louvre to reduce diffuse light 8806 · 8808 · 8814 with electronic ballast 1.5 m connecting cable H07RN8-F 3G 1,59 · with water stop 1.2 m protective tube for cable connection to connecting sleeve • symmetrical floodlights The following accessories can be ordered separately for these luminaires: • inside louvres • infrared filters A combination of louvre and infrared filter is available to special order. • adjustable floodlights with built-in infrared filter The following accessories can be ordered separately for these luminaires: • inside louvres • dichroic colour effect filters in green, blue or yellow • diffuser lenses, either wide beam or flat beam Accessories can be used singly or in combination. Please note: When the glass is wet, there may be a danger of skidding. We recommend skid-blocking glass according to DIN 51130 R 13 – BEGA Patent DE 196 29 241 for walk-over public areas. We supply any luminaire with this skid-blocking glass which is denoted by R after the article number. The light distribution is more broad spread when this type of glass is used. B = Ø recessed opening

A

Location luminaires · white safety glass

Lamp Lumen

8803 8805

1 TC-S 5 W 1 TC-D 13 W

T

250 900

A

35° 35°

B

C

205 182 110 245 225 115

40 C

Symmetrical floodlights · clear safety glass b  Lumen

Lamp

8806 8807

1 HIT-TC-CE 20 W GU 6,5 16° G 12 14° 1 HIT-CE 35 W

Base

1700 3400

T

50° 65°

A

B

C

205 182 190 245 225 205

663 673

154 152

669 – 670 –

145 145 321 321

B

Adjustable floodlights · clear safety glass

Lamp

8808 8814 8809 8819

1 1 1 1

louvre

HIT-TC-CE HIT-TC-CE HIT-TC-CE HIT-TC-CE

20 20 35 35

Base

b  Lumen

W GU 6,5 10° W GU 6,5 6° W G 8,5 13° W G 8,5 8°

infrared filter

1700 1700 3400 3400

T

A

B

C

45° 55° 60° 70°

205 205 245 245

182 182 225 225

190 190 205 205

colour effect filters

diffuser lenses

146 146 322 322

wide beam

147 147 323 323

262 263 – – 300 309 – –

flat beam

b =  half beam angle

303


Drive-over in-ground floodlights made of stainless steel Installation depth 140 - 310 mm Pressure load 2000 kg Protection class IP 68

Floodlights made of stainless steel for installation in compacted surfaces, both indoors and outdoors. The luminaires are installed e.g. in gravel, lawns, flower-beds or compacted surfaces so they »float«. If installed in an installation housing, this is an accessory and must be ordered separately. Vehicles with pneumatic tyres can drive over the luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. Please note: The operating temperatures (T) given in the table are the temperatures attained in the centre of the glass surface (according to EN 60 598 ambient temperature ta 15 °C). The infrared filters shown reduce the respective surface temperatures by about 20 %. All exact temperatures and important technical data are given in the instructions for use for these luminaires. Floodlights of the same design with adjustable light distribution are given on page 306. We also supply coloured disks on request in the colours blue, green, yellow or red.

m

2

1

0

1

m

2

4

2

0

2

4

m

9

9

9

7

7

7

5

5

3

E

1

8005

1 QT 12-ax 35 W 200 400 600 800 1000 lx

m

4

2

0

2

E

3

1

8000

1

1 HIT-TC-CE 20 W 100 200 300 400 500 lx

4

2

0

2

4

m

4,5

4,5

18

3,5

3,5

14

2,5

2,5 E

1,5

8029

0,5

m

40

80

4

2

1 TC-TEL 26 W 120 160 200 lx

0

2

E

6

0,5

8012

2

60

4

1 HME 50 W 120 180 240 300 lx

2

0

2

4

m

9

9

9

7

7

7

5

5

5

E

3 1

3

8014

1 HIT-CE 35 W 160 320 480 640 800 lx

m

4

2

0

2

E

1 60

m

4

4

1 TC-TEL 42 W 120 180 240 300 lx

2

0

2

4

1

m

9

18

7

7

14

5

5 E

60

m

8

1 HME 125 W 120 180 240 300 lx

4

0

4

8022

1 80

m

8

8

1 HSE-E 70 W 160 240 320 400 lx

4

0

4

8

m

14

14

7

10

10

m

20

40

60

4

2

0

4,5

1 HME 250 W 80 100 lx

2 4 Ι max. bei γ 10°

8027

4

2

0

1 QT 32 100 W 120 150 lx

2

4

E

8111

1 HIT-CE 35 W 160 320 480 640 800 lx

4

2

0

2

4

E

8019

1 HST-DE 70 W 1 HIT-DE-CE 70 W 400 800 1200 1600 2000 lx

8

4

0

4

8

8030

20

40

4

2

1 HSE-MF 150 W 60 80 100 lx

0

2 4 Ι max. bei γ 23°

1

40

4

2

m

0

2

4

E

3

1 HSE-MF 250 W 1 HIE 250 W x 0,64 80 120 160 200 lx

2

m

90

5 E

6

8025

60

2

9

2

8007

30

E

18

E

E

6

18

6

4

10 E

3

8020

1

2

3

8036

9

3

0

10

1,5

m

4

2

5

3

m

4

4

8017

30

60

90

4

2

0

9

1 QT 32 100 W 120 150 lx

2 4 Ι max. bei γ 25°

4 3,5

7 3

2,5

5

8034

0,5

m

40

80

4

2

1

1 TC-TEL 26 W 120 160 200 lx

0

9

2 4 Ι max. bei γ 23°

m

7

5

5

8038

m

40

80

4

2

9

1 TC-TEL 42 W 120 160 200 lx

0

2 4 Ι max. bei γ 25°

1

m

14

5

10 E

8023

1 40

80

4

2

1 HSE-E 70 W 1 HIE-CE/S 70 W 120 160 200 lx

3

8013

1

0 2 4 Ι max. bei γ15°

E

8015

80

m

4

1 HIT-CE 35 W 160 240 320 400 lx

2

0

9

2 4 Ι max. bei γ 20°

7 5 E

8024

1 HIT-DE-CE 70 W 1 HST-DE 70 W 400 800 1200 1600 2000 lx

8

18

7

3

80

E 1 HME 50 W 120 160 200 lx

3

E

1

40

9

7

3

304

2

E

1,5

4

0

4 8 Ι max. bei γ 20°

E

3

8021

1

m

1 HME 125 W 120 160 200 lx

40

80

8

4

20

1 HSE-MF 250 W 1 HIE 250 W x 0,64 40 60 80 100 lx

18

0

4 8 Ι max. bei γ 20°

14 10

E

8026

6

1 HME 250 W

8056

2 20

1 HSE-MF 150 W x 1,21 40 60 80 100 lx

E

6

8028

2


symmetrical

asymmetrical

In-ground floodlights either as • symmetrical floodlights • asymmetrical floodlights Protection class IP 68 10 m Frame ring and luminaire housing made of stainless steel · Safety glass Reflector of pure anodized aluminium 8111 narrow beam · with built-in louvre to reduce diffuse light 8000 · 8029 · 8034 · 8036 · 8038 with electronic ballast 2 cable glands for connecting cable Ø 9 -15 mm · 8005 for Ø 9 -13 mm The following accessories can be ordered separately for these luminaires: • inside louvres • infrared filters • installation housings A combination of louvre and infrared filter is available to special order. Matching installation housings made of stainless steel are given in the table. All technical data are given in the instructions for use for these luminaires.

A

Please note: When the glass is wet, there may be a danger of skidding. We recommend skid-blocking glass according to DIN 51130 R 13 – BEGA Patent DE 196 29 241 for walk-over public areas. We supply any luminaire with this skid-blocking glass which is denoted by R after the article number. The light distribution is more broad spread when this type of glass is used. Symmetrical floodlights Lamp

8005 8000 8007 8029 8012 8111 8014 8036 8019 8020 8022 8030 8025 8027

1 1 1 1 1 1 1 1 1 1 1 1 1 1

W W W W W W W W W W W W W W

b

Lumen

T

A

B

C

8° 600 16° 1700 19° 1470 52° 1750 60° 2000 6° 3400 14° 3400 36° 3200 13° 6900 48° 6800 35° 5900 38° 17 000 38° 14 000 38° 31 100

100° 50° 100° 60° 100° 75° 65° 75° 70° 90° 75° 60° 105° 90°

145 205 245 245 245 245 245 330 330 330 330 410 410 410

95 140 175 175 175 175 175 240 240 240 240 325 325 325

140 165 185 185 185 185 185 225 225 225 225 310 310 310

671 663 673 681 681   – 673 683 683 683 683 684 684 684

151 154 152 – – – 152 157 157 – – – – –

693 680 687 687 687 687 687 688 688 688* 688* 699 699 699

Asymmetrical floodlights Lamp

8017 8034 8013 8015 8038 8024 8021 8023 8056 8026 8028

1 1 1 1 1 1 1 1 1 1 1

louvre

A

B

C

140 200 235 235 235 235 235 315 315 315 315 395 395 395

260 275 310 310 310 310 310 395 395 395 395 500 500 500

170 190 210 210 210 210 210 255 255 255 255 340 340 340

A

C

Install. housings

QT 32 100 TC-TEL 26 HME 50 HIT-CE 35 TC-TEL 26 · 32 · 42 HI / HST-DE 70 HME 80 ·125 HIE-CE/S · HSE-E 50 ·70 HIE-CE/S · HSE-MF 150 HME 250 HIE · HSE-MF 250

B

Install. housings

QT 12-ax 35 HIT-TC-CE 20 QT 32 100 TC-TEL 26 HME 50 HIT-CE 35 HIT-CE 35 TC-TEL 26 · 32 · 42 HI /HST-DE 70 HME 80 ·125 HIE-CE/S · HSE-E 50 ·70 HIE-CE/S · HSE-MF 150 HME 250 HIE · HSE-MF 250

C

W W W W W W W W W W W

infrared filter

b

Lumen

T

A

B

C

21/20° 1470 52/50° 1750 67/61° 2000 18/20° 3400 36/37° 3200 12/9° 6900 48/52° 6800 39/41° 5900 46/49° 17 000 46/49° 14 000 46/49° 31 100

85° 55° 95° 60° 75° 70° 90° 75° 75° 125° 105°

245 245 245 245 330 330 330 330 410 410 410

175 175 175 175 240 240 240 240 325 325 325

185 185 185 185 225 225 225 225 310 310 310

b = half beam angle

685   –   – 685   – 668   –   –   –   –   –

158 – – 158 – 159 – – – – –

687 687 687 687 688 688 688* 688* 699 699 699

A

B

C

235 235 235 235 315 315 315 315 395 395 395

310 310 310 310 395 395 395 395 500 500 500

210 210 210 210 255 255 255 255 340 340 340

* installation housing can only be used at lower wattage

B

305


Drive-over in-ground floodlights made of stainless steel with adjustable light distribution Installation depth 165 - 225 mm Pressure load 2000 kg Protection class IP 68 Floodlights made of stainless steel with adjustable light distribution for installation in compacted surfaces, both indoors and outdoors. Either symmetrical or asymmetrical light distribution is produced thanks to the adjustable slope angles of the reflectors. The luminaires are installed e.g. in gravel, lawns, flower-beds or compacted surfaces so they »float«. If installed in an installation housing, this is an accessory and must be ordered separately. Vehicles with pneumatic tyres can drive over the luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. Please note: The operating temperatures (T) given in the table are the temperatures attained in the centre of the glass surface (according to EN 60 598 ambient temperature ta 15 °C). All exact temperatures and important technical data are given in the instructions for use for these luminaires. Floodlights of the same design with symmetrical or asymmetrical light distribution are given on page 304.

m

4

2

0

2

4

9 7 5 E

3 1

m

4

2

0

2

4

m

9

9

7

7

5

m

4

2

0

2

4

5 E

3 1

8700

1 HIT-TC-CE 20 W 300 600 900 1200 1500 lx

1 HIT-TC-CE 20 W 300 600 900 1200 1500 lx

4

2

0

2

E

3

8650

4

1

m

9

18

7

14

5

8750

1 HIT-TC-CE 35 W 200 400 600 800 1000 lx

8

4

0

4

8

10 E

3 1

306

6

8651

1 HIT-TC-CE 35 W 300 600 900 1200 1500 lx

2

E

8751

1 HIT-TC-CE 70 W 160 320 480 640 800 lx


adjustable

In-ground floodlights with adjustable light distribution Protection class IP 68 10 m Frame ring and luminaire housing made of stainless steel · Safety glass · Reflector · Built-in infrared filter 2 cable glands for connecting cable Ø 9 -15 mm · 2,59 connecting terminal The slope angle of the reflectors is adjustable from 0° to 30°. The optical system can be rotated ±180° around the vertical axis of the luminaire. Light distribution is adjusted to meet the requirements of the lighting situation. 8650 · 8651 narrow beam · with built-in louvre to reduce diffuse light 8650 · 8700 with electronic ballast The following accessories can be ordered separately for these luminaires: • inside louvres • dichroic colour effect filters in green, blue or yellow • diffuser lenses, either wide beam or flat beam • installation housings Accessories can be used singly or in combination. Matching installation housings made of stainless steel are given in the table. All technical data are given in the instructions for use for these luminaires. Please note: When the glass is wet, there may be a danger of skidding. We recommend skid-blocking glass according to DIN 51130 R 13 – BEGA Patent DE 196 29 241 for walk-over public areas. We supply any luminaire with this skid-blocking glass which is denoted by R after the article number. The light distribution is more broad spread when this type of glass is used.

A

A

C C

B

Adjustable floodlights

Install. housings b Lumen

T

A

B

C

W GU 6,5 10° 1700 W GU 6,5 6° 1700 W G 8,5 13° 3400 W G 8,5 8° 3400 W G 8,5 14° 6900

45° 55° 60° 70° 65°

205 205 245 245 330

140 140 175 175 240

165 165 185 185 225

Lamp

8700 8650 8750 8651 8751

1 1 1 1 1

louvre

HIT-TC-CE HIT-TC-CE HIT-TC-CE HIT-TC-CE HIT-TC-CE

20 20 35 35 70

Base

colour effect filters

diffuser lenses

wide beam

669 – 670 – 670

145 145 321 321 321

146 146 322 322 322

flat beam

147 147 323 323 323

262 263 – – 300 309 – – 300 309

b = half beam angle

680 680 687 687 688

A

B

C

200 200 235 235 315

275 275 310 310 395

190 190 210 210 255

B

307


Drive-over in-ground floodlights with shallow installation depth Installation depth 120 mm Pressure load 3000 kg Protection class IP 67

Location luminaires and floodlights with symmetrical or asymmetrical light distribution. These luminaires with a shallow installation depth of just 120 mm are particularly designed for areas with limited installation space e.g. for parking levels or suspended ceilings, both indoors and outdoors. Before installing the luminaires, the customer must prepare a foundation which absorbs the pressure on the luminaires. Vehicles with pneumatic tyres can drive over the luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. Please note: The operating temperatures (T) given in the table are the temperatures attained in the centre of the glass surface (according to EN 60 598 ambient temperature ta 15 °C). The infrared filters shown reduce the respective surface temperatures by about 20 %. All exact temperatures and important technical data are given in the instructions for use for these luminaires. Floodlights of the same design with adjustable light distribution are given on page 310. We also supply coloured disks on request in the colours blue, green, yellow or red.

m

2

0

2

4

m 9

7

7

5

1

m

8041

1 HST-DE 70 W 120 240 360 480 600 lx

4

2

0

9

2 4 Ι max. bei γ 15°

7

E

3

m 9

1

0

1

2

E

3 1

m

8035

1 QT-12ax 35 W 200 400 600 800 1000 lx

4

2

0

2

4

9 7

5

1

2

5 E

3

5 E

3

8039

1 HIT-CE 35 W 100 200 300 400 500 lx

4

2

0

2 4 Ι max. bei γ 20°

7

1

m

8037

1 HIT-CE 35 W 100 200 300 400 500 lx

4

2

0

2

4

9 7

5

5 E

3 1

308

4

9

E

8040

1 HIT-DE-CE 70 W 1 HST-DE 70 W 100 200 300 400 500 lx

3 1

8041

1 HIT-DE-CE 70 W 120 240 360 480 600 lx


symmetrical

asymmetrical

In-ground floodlights either as • location luminaires • symmetrical floodlights • asymmetrical floodlights Protection class IP 67 Frame ring made of stainless steel · Luminaire housing made of die cast aluminium Safety glass · Reflector of pure anodized aluminium 2 cable glands for connecting cable Ø 9 -15 mm 2,59 connecting terminal We supply the following accessories for the floodlights on this double page : • inside louvres • infrared filters Accessories must be ordered separately. A combination of louvre and infrared filter is available to special order. Please note: When the glass is wet, there may be a danger of skidding. We recommend skid-blocking glass according to DIN 51130 R 13 – BEGA Patent DE 196 29 241 for walk-over public areas. We supply any luminaire with this skid-blocking glass which is denoted by R after the article number. The light distribution is more broad spread when this type of glass is used.

Location luminaires · white safety glass

Lamp Lumen

T

8031 8032 8033

1 TC-S 5 W 250 1 TC-D 18 W 1200 1 TC-D 26 W 1800

40° 45° 50°

A

A

B

C

155 215 120 260 325 120 330 395 120

C

Symmetrical floodlights · clear safety glass

Lamp

b Lumen

T

8035 8037 8041

1 QT 12-ax 35 W 1 HIT-CE 35 W 1 HI/HST-DE 70 W

8° 600 15° 3400 21° 6900

90° 80° 90°

A

B

C

155 215 120 260 325 120 330 395 120

671 673 675

151 152 153

657 658

155 156

B

Asymmetrical floodlights · clear safety glass

Lamp

b Lumen

T

8039 8040

1 HIT-CE 35 W 16/18° 3400 1 HI/HST-DE 70 W 40/25° 6900

75° 80°

louvre

infrared filter

b = half beam angle

A

B

C

260 325 120 330 395 120

309


Drive-over in-ground floodlights with shallow installation depth and adjustable light distribution

m

Installation depth 120 mm Pressure load 3000 kg Protection class IP 67

5

Floodlights with adjustable light distribution. The adjustable slope angles of the reflectors allow either symmetrical or asymmetrical light distribution. These luminaires with a shallow installation depth of just 120 mm are designed for areas with limited installation space e.g. for parking levels or suspended ceilings, both indoors and outdoors. Before installing the luminaires, the customer must prepare a foundation which absorbs the pressure on the luminaires. Vehicles with pneumatic tyres can drive over the luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. Please note: The operating temperatures (T) given in the table are the temperatures attained in the centre of the glass surface (according to EN 60 598 ambient temperature ta 15 °C). All exact temperatures and important technical data are given in the instructions for use for these luminaires. Location luminaires and floodlights of the same design with symmetrical or asymmetrical light distribution are given on page 308.

m

310

2

1

0

1

2

m

1

9

4,5

7

3,5

0,5

0

0,5

1

2,5 E

3

E

1,5

1

8047

0,5

80

2

1 QR-CBC 35 W/10° 160 240 320 400 lx

1

0

1

2

m

9

9

7

7

5

8016

1 QR-CBC 20 W/10° 100 200 300 400 500 lx

4

2

0

2

4

5 E

3 1 80

m

4

E

3

8018

1

1 QR-CBC 35 W/10° 160 240 320 400 lx

2

0

2

4

m

9

9

7

7

8055

1 HIT-TC-CE 20 W 200 400 600 800 1000 lx

4

2

0

2

5

5 E

m

E

3

3 1

4

8096

1 HIT-TC-CE 20 W 300 600 900 1200 1500 lx

4

2

0

2

4

1

m

9

18

7

14

5

8089

1 HIT-TC-CE 35 W 200 400 600 800 1000 lx

8

4

0

4

8

10 E

3 1

6

8194

1 HIT-TC-CE 35 W 300 600 900 1200 1500 lx

2

E

8095

1 HIT-TC-CE 70 W 160 320 480 640 800 lx


adjustable

In-ground floodlights with adjustable light distribution Protection class IP 67 Frame ring made of stainless steel · Die cast aluminium luminaire housing · Safety glass 8047 · 8016 · 8018 for cool beam reflector lamps The half beam angle is determined by the type of lamp used. 8047 without transformer · Safety class III 3 8055 8055 8089 8055 8096

· · · · ·

8096 8096 8095 8096 8194

· 8089 · 8194 · 8095 for discharge lamps · built-in infrared filter · 8194 reflector of pure anodized aluminium cool beam reflector with electronic ballast narrow beam · with built-in louvre to reduce diffuse light

2 cable glands for connecting cable Ø 9 -15 mm · 2,59 connecting terminal The slope angle of the reflectors is adjustable 0° to 30°. The optical system can be rotated around the vertical axis of the luminaire. The light distribution is thus adapted to the requirements of the lighting situation. We supply the following accessories for luminaires 8055 · 8089 · 8095 • inside louvres • dichroic colour effect filters in the colours green, blue or yellow • diffuser lenses, either wide beam or flat beam Accessories can be used singly or in combination. We supply the following accessories for luminaires 8096 · 8194 • dichroic colour effect filters in the colours green, blue or yellow Accessories must be ordered separately. Please note: When the glass is wet, there may be a danger of skidding. We recommend skid-blocking glass according to DIN 51130 R 13 – BEGA Patent DE 196 29 241 for walk-over public areas. We supply any luminaire with this skid-blocking glass which is denoted by R after the article number. The light distribution is more broad spread when this type of glass is used.

Floodlights without transformer

A

Lamp Lumen

8047

1 QR-CBC 51 35 W

600

T

100°

A

B

C

130 215 120 C

Floodlights with transformer

Lamp Lumen

8016 8018

1 QR-CBC 51 20 W 1 QR-CBC 51 35 W

T

A

320 600

65° 100°

Base

b Lumen

B

C

130 215 120 130 215 120

Floodlights

B

Lamp

8055 8096 8089 8194 8095

1 1 1 1 1

louvre

HIT-TC-CE HIT-TC-CE HIT-TC-CE HIT-TC-CE HIT-TC-CE

20 20 35 35 70

W W W W W

G G G G G

8,5 10° 8,5 6° 8,5 13° 8,5 8° 8,5 14°

colour effect filters

1700 1700 3400 3400 6900

T

A

B

C

40° 50° 55° 65° 70°

260 260 260 260 260

325 325 325 325 325

120 120 120 120 120

diffuser lenses

wide beam

670 – 670 – 670

321 321 321 321 321

flat beam

322 322 322 322 322

323 323 323 323 323

300 309 – – 300 309 – – 300 309

b = half beam angle

311


Drive-over in-ground floodlights for high pressure loads Installation depth 190 - 330 mm Pressure load 5000 kg Protection class IP 67

Location luminaires and floodlights with symmetrical or asymmetrical light distribution for installation in compacted surfaces, both indoors and outdoors. These luminaires are characterized by their capacity to withstand especially high pressure loads of 5000 kg. They are extremely robust in construction and suitable for areas subject to high physical stress. The luminaires are mounted in an installation housing made of high-strength, die cast aluminium on a foundation which absorbs the pressure loads. The foundation including drainage must be prepared by the customer. Vehicles with pneumatic tyres can drive over the luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. Please note: The operating temperatures (T) given in the table are the temperatures attained in the centre of the glass surface (according to EN 60 598 ambient temperature ta 15 °C).

m

The infrared filters shown reduce the respective surface temperatures by about 20 %. All exact temperatures and important technical data are given in the instructions for use for these luminaires. Luminaires of the same design with adjustable light distribution are given on page 314.

9

9

7

7

2

1

0

1

2

9

7

7

5 E

3

1

8701

1

1 QT 12-ax 35 W 200 400 600 800 1000 lx

m

4

2

0

2

4

2

0

2

4

9

7

7

5

E

8617

1 HIT-TC-CE 20 W 100 200 300 400 500 lx

m

9

4

2

0

2

4

5 E

3

m

20

40

1 QT 32 75 W 60 80 100 lx

4

2

0

2

E

3

8704

1

4

5

1

8606

1 HIT-CE 35 W 120 240 360 480 600 lx

m

8

4

0

4

8

20

40

1 HME 80 W 60 80 100 lx

4

2

0

5

3 1

E

3

8712

1

20

40

1 HME 50 W 60 80 100 lx

4

2

0

2

4

E

8712

m

18

18

14

14

2

4

10

10 E

60 2

4

5

3

m

8715

1 HIT-DE-CE 70 W 1HST-DE 70 W 400 800 1200 1600 2000 lx

m

4

2

0

9

2 4 Ι max. bei γ 23°

2

8616

1 HIT-DE-CE 150 W 1 HST-DE 150 W 400 800 1200 1600 2000 lx

m

4

2

0

9

2 4 Ι max. bei γ 25°

5

5 3

E

3

1

8705

1

m

E

6

7

7

20

40

60

4

2

0

4,5

1 QT 32 75 W 80 100 lx

2 4 Ι max. bei γ 20°

3,5

E

8607

80

m

4

1 HIT-CE 35 W 160 240 320 400 lx

2

0

4,5

2 4 Ι max. bei γ15°

3,5

2,5

2,5

1,5

E

1,5

E

0,5

8713

0,5

8713

60

m 18

8

1 HME 50 W 120 180 240 300 lx

4

0

4 8 Ι max. bei γ15°

14

6

60

m 18

8

1 HME 80 W 120 180 240 300 lx

4

0

4 8 Ι max. bei γ15°

14

10

10 E

8716

1 HIT-DE-CE 70 W 2 1 HST-DE 70 W 200 400 600 800 1000 lx

312

m

9

6

E

8618

1 HIT-DE-CE 150 W 2 1 HST-DE 150 W 160 320 480 640 800 lx


symmetrical

asymmetrical

In-ground luminaires as • location luminaires • symmetrical floodlights • asymmetrical floodlights Protection class IP 67 Stainless steel frame ring · Die cast aluminium luminaire housing and installation housing Safety glass · Reflector of pure anodized aluminium 1.5 m connecting cable H07RN8-F 3G 1.59 · with water stopper 1.2 m protective tube for underground cable up to connecting sleeve 8617 with electronic ballast We supply the following accessories for these luminaires • inside louvres • IR filters Accessories must be ordered separately. A combination of louvres and IR filters can be supplied to special order. Please note: When the glass of the luminaires is wet, there may be a danger of skidding. We recommend skid-blocking glass according to DIN 51130 R 13 – BEGA-Patent DE 196 29 241 for walk-over public areas. Luminaires denoted by R after the article number are supplied with this glass. Light distribution is more broad spread when this type of glass is used.

Location luminaires · white safety glass

Lamp Lumen

T

8703 8708 8711

1 TC-D 10 W 600 1 TC-D 13 W 900 1 TC-D 18 W 1200

50° 40° 25°

A

B

C

160 200 190 245 275 230 330 355 250 A

Symmetrical floodlights · clear safety glass

Lamp

8701 8617 8704 8606 8712 8715 8616

1 1 1 1 1 1 1

QT 12-ax 35 HIT-TC-CE 20 QT 32 75 HIT-CE 35 HME 50 · 80 HI/HST-DE 70 HI/HST-DE 150

b

Lumen

T

A

B

W 8° 600 W 16° 1700 W 22° 1050 W 14° 3400 W 46 · 65° 4000 W 7° 6900 W 8° 15 000

90° 50° 80° 65° 90° 75° 80°

160 205 245 245 330 330 330

200 250 275 275 355 355 360

C

190 210 230 230 250 250 330

671 663 672 672 682 674 674

151 154 182 182 – 183 183

686 686   – 689 689

185 185 – 186 186

C

Asymmetrical floodlights · clear safety glass

Lamp

8705 8607 8713 8716 8618

1 1 1 1 1

louvres

QT 32 75 HIT-CE 35 HME 50 · 80 HI/HST-DE 70 HI/HST-DE 150

W W W W W

IR filters

b Lumen

T

A

B

24/24° 1050 14/15° 3400 47/44° 4000 10/12° 6900 11/12° 15 000

80° 65° 90° 75° 80°

245 245 330 330 330

275 275 355 355 360

b = half beam angle

C

230 230 250 250 330

B

313


Drive-over in-ground luminaires for high pressure loads with adjustable light distribution Installation depth 210 - 250 mm Pressure load 5000 kg Protection class IP 67

Floodlights with adjustable light distribution. For installation in compacted surfaces, both indoors and outdoors. The adjustable slope angles of the reflectors allow symmetrical or asymmetrical light distribution. These luminaires are characterized by their capacity to withstand especially high pressure loads of 5000 kg. They are extremely sturdy luminaires which are suitable for areas requiring the highest level of robustness. The luminaires are mounted in an installation housing made of high-strength die cast aluminium on a foundation which is designed to bear the pressure load. The foundation including drainage must be provided by the customer before installation. Vehicles with pneumatic tyres can drive over these luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. Please note: The operating temperatures (T) in the centre of the glass surface are given in the table (measured according to EN 60 598 at an ambient temperature of 15 °C). All the exact temperatures and important technical data are given in the instructions for use for these luminaires. For location luminaires and floodlights of the same construction with symmetrical or asymmetrical light distribution – see page 312.

314

m

4

2

0

2

4

m

9

9

7

7

5 E

3

1

8757

1

1 HIT-TC-CE 20 W 300 600 900 1200 1500 lx

8

4

0

4

8

m

9

9

7

7

5

m

4

E

8653

1 HIT-TC-CE 20 W 300 600 900 1200 1500 lx

4

2

0

2

4

E

8753

1 HIT-TC-CE 35 W 200 400 600 800 1000 lx

8

4

0

4

8

1

m 9

14

7

10

2

2

3

18

6

0

5 E

3 1

2

5

3

m

4

8654

1 HIT-TC-CE 35 W 300 600 900 1200 1500 lx

4

2

0

2

4

5 E

3

8756

1

1 HIT-TC-CE 70 W 160 320 480 640 800 lx

E

8756 + 300

1 HIT-TC-CE 70 W 200 400 600 800 1000 lx


adjustable

In-ground floodlights with adjustable light distribution Protection class IP 67 Stainless steel frame ring · Die cast aluminium luminaire housing and installation housing Safety glass · Reflector · Built-in IR filter 1.5 m connecting cable H07RN8-F 3G 1.59 · with water stopper 1.2 m protective tube for underground cable up to connecting sleeve The slope angle of the reflectors can be adjusted from 0°- 30°. The optical system can be rotated ±180° around the vertical axis of the luminaire. Light distribution is adjusted to the requirements of the situation. 8757 · 8653 with electronic ballast 8653 · 8654 narrow beam · with built-in louvre to reduce diffuse light We supply the following accessories for these luminaires • inside louvres • dichroic colour effect filters in green, blue or yellow • wide beam or flat beam diffuser lenses Accessories can be used together or on their own. They must be ordered separately. Please note: When the glass of the luminaires is wet, there may be a danger of skidding. We recommend skid-blocking glass according to DIN 51130 R 13 – BEGA-Patent DE 196 29 241 for walk-over public areas. Luminaires denoted by R after the article number are supplied with this glass. Light distribution is more broad spread when this type of glass is used.

A

C

Floodlights · adjustable

Lamp

8757 8653 8753 8654 8756

1 1 1 1 1

louvres

HIT-TC-CE HIT-TC-CE HIT-TC-CE HIT-TC-CE HIT-TC-CE

20 20 35 35 70

Base

b Lumen

W GU 6.5 10° W GU 6.5 6° W G 8.5 13° W G 8.5 8° W G 8.5 14°

colour effect filters

1700 1700 3400 3400 6900

T

A

B

45° 55° 60° 70° 65°

205 205 245 245 330

250 250 275 275 355

diffuser lenses

C

210 210 230 230 250

wide beam

669 – 670 – 670

145 145 321 321 321

flat beam

146 146 322 322 322

147 147 323 323 323

262 263 – – 300 309 – – 300 309

b = half beam angle

B

315


Drive-over in-ground luminaires for high pressure loads Installation depth 120 · 160 mm Pressure load 5000 kg Protection class IP 67

Location luminaires and floodlights with asymmetrical light distribution. For installation in compacted surfaces, both indoors and outdoors. These luminaires are characterized by their capacity to withstand especially high pressure loads of 5000 kg. They are extremely sturdy luminaires which are suitable for areas requiring the highest level of robustness. The luminaires are mounted in an installation housing made of high-strength die cast aluminium on a foundation which is designed to bear the pressure load. The foundation including drainage must be provided by the customer before installation. Vehicles with pneumatic tyres can drive over these luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. Please note: The operating temperatures (T) in the centre of the glass surface are given in the table (measured according to EN 60 598 at an ambient temperature of 15 °C). All the exact temperatures and important technical data are given in the instructions for use for these luminaires. On request, we also supply coloured disks in blue, green, yellow or red.

8613

cd/klm

m

4

2

0

20

1 HIT-TC-CE 20 W 40 60 80 100 lx

4

2

4,5

2 4 Ι max bei γ 35°

360 3,5 2,5 180 E

1,5

8613

0,5 60°

8609

30°

30°

60°

cd/klm

m

0

4,5 400

2 4 Ι max. bei γ 23°

3,5 2,5 E

200

1,5

8609

0,5 60

8610

cd/klm

m

8

1 HIT-CE 35 W 120 180 240 300 lx

4

0

20

40

1 HIT-DE-CE 70 W 1 HST-DE 70 W 60 80 100 lx

8

4

0

9 480

4 8 Ι max. bei γ 25°

7 5

240

E

3

8610

1

8611

cd/klm

m 9

480

4 8 Ι max. bei γ 30°

7 5

240

E

3

8611

1 40

316

60

1 HIT-DE-CE 150 W 1 HST-DE 150 W 120 160 200 lx


asymmetrical

In-ground luminaires as • location luminaires • asymmetrical floodlights Protection class IP 67 Stainless steel frame Die cast aluminium luminaire housing and installation housing Safety glass · Reflector of pure anodized aluminium Floodlights with built-in louvre to suppress lateral glare 1.5 m connecting cable H07RN8-F 3G 1.59 · with water stopper 1.2 m protective tube for underground cable up to connecting sleeve 8613 with electronic ballast Please note: When the glass of the luminaires is wet, there may be a danger of skidding. We recommend skid-blocking glass according to DIN 51130 R 13 – BEGA-Patent DE 196 29 241 for walk-over public areas. Luminaires denoted by R after the article number are supplied with this glass. Light distribution is more broad spread when this type of glass is used.

A

Location luminaires · white safety glass

Lamp Lumen

8600 8608 8620 8621

1 1 1 2

TC-S 5 W 250 TC-D 13 W 900 TC-F 18 W 1100 TC-F 18 W 2200

C

T

A

B

35° 35° 35° 35°

1609 2559 3309 4409

1559 2459 3109 4209

C

120 120 160 160 B

Asymmetrical floodlights · clear safety glass

Lamp

8613 8609 8610 8611

1 1 1 1

HIT-TC-CE 20 HIT-CE 35 HI/HST-DE 70 HI/HST-DE 150

b = half beam angle

W W W W

b

Lumen

T

A

B

35/72° 1700 49/82° 3400 48/80° 6900 52/78° 15 000

60° 70° 70° 105°

1609 2559 3309 4409

1559 2459 3109 4209

C

120 120 160 160

317


Drive-over LED in-ground luminaires Installation depth Pressure load Protection class

70 mm 1000 kg IP 67

Location luminaires and floodlights with built-in LEDs. LED technology is characterized by the following features: • • • • •

long life no maintenance low energy consumption colour stability low surface temperature

These luminaires are designed for installation in compacted surfaces, both indoors and outdoors. The luminaires are mounted in an installation housing on a foundation which is designed to bear the pressure load. The foundation including drainage must be provided by the customer before installation. Vehicles with pneumatic tyres can drive over these luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. All technical data are given in the instructions for use for these luminaires. We also supply the LED location luminaires and floodlights in the light colours blue, green, yellow and red.

318

8300 8301 8302

120 cd/klm

8305 8306 8307

600 cd/klm

60°


1000

400

200

100

In-ground LED luminaires with LEDs 24 V DC as • location luminaires • floodlights Protection class IP 67 · Safety class III 3 Stainless steel luminaire housing and frame Aluminium installation housing White or clear safety glass Reflector of pure anodized aluminium Colour temperature 5500 K Connecting cable H05RN8-F 2 x 19 A separate power supply unit is required to operate the luminaires. Technical data, page 514.

A

C

LED location luminaires · white safety glass

8300 8301 8302 465

In-ground luminaire 6 LED 0,5 W 1,5 W In-ground luminaire 18 LED 3,5 W In-ground luminaire 42 LED Power supply unit for LED luminaires

A

C

100 x 37 70 200 x 37 70 400 x 37 70

LED floodlights · clear safety glass

8305 8306 8307 465

In-ground luminaire 6 LED 0,5 W 1,5 W In-ground luminaire 18 LED 3,5 W In-ground luminaire 42 LED Power supply unit for LED luminaires

A

C

100 x 37 70 200 x 37 70 400 x 37 70

319


Drive-over LED in-ground luminaires for additive RGB colour mix Installation depth Pressure load Protection class

70 mm 1000 kg IP 67

Unshielded luminaires for additive RGB colour mix We supply two control systems to mix and control the coloured light: • coloured light control 243 – for freely programmable sequence • coloured light control 244 – with fixed sequence These luminaires are designed for installation in compacted surfaces, both indoors and outdoors. The luminaires are mounted in an installation housing on a foundation which is designed to bear the pressure load. The foundation including drainage must be provided by the customer before installation. Vehicles with pneumatic tyres can drive over these luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. All important technical data are given in the instructions for use for these luminaires.

320


LED in-ground luminaires for additive RGB colour mix with LEDs 24 V DC Protection class IP 67 · Safety class III 3 Stainless steel luminaire housing and frame Aluminium installation housing White safety glass Reflector of pure anodized aluminium Connecting cable H05RN8-F 4 x 0.759 To operate the luminaires, programmable power supply unit 445 is required together with coloured light control 243 or 244. Technical data, page 515.

A

C

In-ground LED luminaires RGB

8897 8898 445

A

C

In-ground luminaire 12 LED 3.6 W 200 x 37 70 8.4 W 400 x 37 70 In-ground luminaire 28 LED Programmable PSU for LED luminaires RGB 24 V DC

Coloured light controls 243 244

for freely programmable sequence with fixed sequence

321


Drive-over in-ground luminaires for fluorescent lamps TC-S, TC-L and T 16 Installation depth 120 · 125 mm Pressure load 5000 kg Protection class IP 67

Location luminaires and floodlights with symmetrical or asymmetrical light distribution. They are designed for installation in compacted surfaces, both indoors and outdoors. These luminaires are characterized by their capacity to withstand pressure loads of 5000 kg. They are extremely sturdy luminaires which are suitable for areas requiring the highest level of robustness. The luminaires are mounted in an installation housing on a foundation which is designed to bear the pressure load. The foundation including drainage must be provided by the customer before installation. Vehicles with pneumatic tyres can drive over these luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. The luminaires for fluorescent lamps T 16 are equipped with electronic ballasts. 14 · 24 W, 28 · 54 W or 35 · 80 W lamps can be used in these luminaires. Please note: The operating temperatures (T) in the centre of the glass surface are given in the table (measured according to EN 60 598 at an ambient temperature of 15 °C). All the exact temperatures and important technical data are given in the instructions for use for these luminaires.

cd/klm

8732 8733 8734 8831

240

m

4

2

0

2

m

4

4,5

4,5

3,5

3,5

2,5 120

m

60°

30°

30°

60°

4

2

0

2

4

2

0

2

4

2,5

1,5

E

1,5

0,5

8732

0,5

m

4

10

20

30

4

2

0

1 TC-S 11 W 40 50 lx

2

E

8733

20

40

60

1 TC-L 24 W 80 100 lx

cd/klm

8626 8628 8629

4

4,5 4

320

3,5 3 2,5 2

8734

0,5 60

m

4

1

1 TC-L 55 W 120 180 240 300 lx

2

0

2

8831

60

m

4

4

160

E

E

1,5

4

2 TC-L 36 W 120 180 240 300 lx

2

0

2

m

4

1

2

8626

20

40

60

cd/klm

8832 8833 8834 8835

8628

60

m

4

2

0

2 4 Ι max. bei γ 30°

3,5

m

30°

4

2

0

4,5

30°

60°

2 4 Ι max. bei γ 30°

m

4

0

4

8

E

8629

60

m

1 T 16 80 W 120 180 240 300 lx

4

2

0

20

1 TC-L 24 W 30 40 50 lx

4,5

2 4 Ι max. bei γ 30°

2,5

1,5 0,5

60°

8

3,5

2,5 80

60°

1

1 T 16 54 W 120 180 240 300 lx

4,5 160

30°

2

E

1

1 T 16 24 W 80 100 lx

3

3 E

2

30°

4

4

3

60°

E

1,5

8832

0,5

5

10

1 TC-S 11 W 15 20 25 lx

4

2

0

2

E

8833

10

cd/klm

8642 8643 8644

4

4 3,5

200 3

2,5 E

1,5

8834

0,5

m

20

40

60

4

2

0

2

1 TC-L 55 W 80 100 lx

2

4

m

100

E

1

8835

20

40

60

4

2

0

2 TC-L 36 W 80 100 lx

2

m

4

60°

30°

30°

60°

8

4

0

4

8

40

60

9 4

4

3

3

7 5

2

E

1

8642

10

322

20

30

1 T 16 24 W 40 50 lx

2 1 10

20

30

E

3

8643

1

1 T 16 54 W 40 50 lx

E

8644

20

1 T 16 80 W 80 100 lx


In-ground luminaires for fluorescent lamps as • location luminaires • symmetrical floodlights • asymmetrical floodlights Protection class IP 67 Stainless steel frame · Aluminium housing Safety glass · Reflector of pure anodized aluminium Symmetrical floodlights with built-in louvre to suppress lateral glare 1.5 m connecting cable H07RN8-F 3G 1.59 · with water stopper 1.2 m protective tube for underground cable up to connecting sleeve Luminaires for fluorescent lamps T 16 and TC-L 55 W with electronic ballast Please note: When the glass of the luminaires is wet, there may be a danger of skidding. We recommend skid-blocking glass according to DIN 51130 R 13 – BEGA-Patent DE 196 29 241 for walk-over public areas. Luminaires denoted by R after the article number are supplied with this glass. Light distribution is more broad spread when this type of glass is used.

Location luminaires · white safety glass

Lamp Lumen

T

A

8742 8743 8744 8830

1 1 1 2

W 900 W 1800 W 4800 W 5800

40° 45° 50° 55°

180 x 360 180 x 460 180 x 675 180 x 1000

8602 8603 8604

1 T 16 14 · 24 W 1750 1 T 16 28 · 54 W 4450 1 T 16 35 · 80 W 6150

45° 50° 55°

115 x 635 107 x 625 125 115 x 1235 107 x 1225 125 115 x 1535 107 x 1525 125

TC-S TC-L TC-L TC-L

11 24 55 36

170 x 170 x 170 x 170 x

B

C

340 440 655 980

120 120 120 120

Symmetrical floodlights · clear safety glass

Lamp

b

Lumen

T

A

8732 8733 8734 8831

1 1 1 2

W W W W

80/72° 80/72° 80/72° 80/72°

900 1800 4800 5800

45° 55° 60° 65°

180 x 360 180 x 460 180 x 675 180 x 1000

8626 8628 8629

1 T 16 14 · 24 W 1 T 16 28 · 54 W 1 T 16 35 · 80 W

55/75° 55/77° 55/79°

1750 4450 6150

45° 50° 55°

115 x 635 107 x 625 125 115 x 1235 107 x 1225 125 115 x 1535 107 x 1525 125

TC-S TC-L TC-L TC-L

11 24 55 36

170 x 170 x 170 x 170 x

B

C

340 440 655 980

120 120 120 120

A

C

Asymmetrical floodlights · clear safety glass b Lumen

Lamp

8832 8833 8834 8835

1 1 1 2

W W W W

63/100° 63/100° 63/100° 63/100°

900 1800 4800 5800

45° 55° 60° 65°

180 x 360 180 x 460 180 x 675 180 x 1000

8642 8643 8644

1 T 16 14 · 24 W 1 T 16 28 · 54 W 1 T 16 35 · 80 W

65/80° 62/80° 61/74°

1750 4450 6150

45° 50° 55°

115 x 635 107 x 625 125 115 x 1235 107 x 1225 125 115 x 1535 107 x 1525 125

TC-S TC-L TC-L TC-L

b = half beam angle

11 24 55 36

T

A

170 x 170 x 170 x 170 x

B

C

340 440 655 980

120 120 120 120

B

323


Drive-over in-ground luminaires for additive RGB colour mix Installation depth Pressure load Protection class

125 mm 5000 kg IP 67

RGB floodlights with asymmetrical light distribution for installation in compacted surfaces, both indoors and outdoors. Luminaires for additive colour mix are operated with coloured fluorescent lamps T 16. Lamps of the same length but with two different light outputs can be used. We supply two control systems to mix and control the coloured light: • coloured light control 243 – for freely programmable sequence • coloured light control 244 – with fixed sequence Vehicles with pneumatic tyres can drive over these luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. The luminaires are mounted in an installation housing on a foundation which is designed to bear the pressure load. The foundation including drainage must be provided by the customer before installation. Please note: The operating temperatures (T) in the centre of the glass surface are given in the table ( measured according to EN 60 598 at an ambient temperature of 15 °C ). All the exact temperatures and important technical data are given in the instructions for use for these luminaires.

324


1535

1235

635

In-ground luminaires for additive RGB colour mix with DALI electronic ballasts for coloured fluorescent lamps T 16 Protection class IP 67 Stainless steel frame Aluminium luminaire housing and installation housing Safety glass · Reflector of pure anodized aluminium 1.5 m connecting cable H07RN8-F 3G 1.59 · with water stopper 1.5 m control cable H07RN8-F 6 x 1.09 · with water stopper 2.4 m protective tube for underground cable up to connecting sleeve A separate coloured light control is required to mix the colours of these luminaires. Technical data, page 515. We supply the following accessories for these luminaires • clip-on polycarbonate filter to increase the colour saturation. The article number includes 3 filters (red, green and blue). When coloured filters are used, the luminaires may only be operated at the lower lamp power. Coloured filters must be ordered separately. Please note: When the glass of the luminaires is wet, there may be a danger of skidding. We recommend skid-blocking glass according to DIN 51130 R 13 – BEGA-Patent DE 196 29 241 for walk-over public areas. Luminaires denoted by R after the article number are supplied with this glass. Light distribution is more broad spread when this type of glass is used.

A

C

Asymmetrical RGB floodlights

Lamp

8693 8694 8695

3 T 16 14 · 24 W 3 T 16 28 · 54 W 3 T 16 35 · 80 W

T

50° 60° 70°

A

B

C

235 x 635 227 x 625 125 235 x 1235 227 x 1225 125 235 x 1535 227 x 1525 125

194 195 196

B

Coloured light controls 243 244

for freely programmable sequence with fixed sequence

RGB coloured filter

325


Drive-over in-ground luminaires to illuminate ground surfaces Installation depth Pressure load Protection class

95 · 130 mm 1000 kg IP 67

In-ground luminaires to illuminate ground surfaces, both indoors and outdoors. They are equipped with one, two or four light sectors to meet different lighting situations. Before installing the luminaires, a foundation must be supplied by the customer which is designed to bear the pressure loads. Vehicles with pneumatic tyres can drive over these luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. All technical data are given in the instructions for use for these luminaires. The LED luminaires can also be supplied on request in the light colours green, blue, yellow and red. Luminaires for this type of illumination but with greater dimensions are given on page 328.


In-ground luminaires with LEDs or for low voltage tungsten halogen lamps Protection class IP 67 · Safety class I 1 8778 · 8774 · 8787 · 8789 Safety class III 3 Cast stainless steel and stainless steel housing Luminaire cover made of die cast aluminium Optical lens made of silica glass BEGA Patent DE 101 39 002 Reflector of pure anodized aluminium Light output from one, two or four sectors 1 cable gland for connecting cable Ø 9 -13 mm 2.59 connecting terminal 8671 · 8673 · 8674 · 8675 Colour temperature 5500 K Colour graphite grey

1 Light sector 60°

Lamp Lumen

8671 8778 8779

1 LED 5 W 1 QT 9-ax 20 W 1 QT 9-ax 20 W

A

B

C

D

50 w/ pow. suppl. unit Ø 120 909 95 30 320 w/o transformer Ø 120 909 110 30 320 with transformer Ø 120 909 130 30 A

1 Light sector 180°

Lamp Lumen

8673 8774 8780

1 LED 5 W 1 QT 9-ax 20 W 1 QT 9-ax 20 W

A

B

C

D

D

50 w/ pow. suppl. unit Ø 120 909 95 30 320 w/o transformer Ø 120 909 110 30 320 with transformer Ø 120 909 130 30

C

2 Light sectors 60° each

Lamp Lumen

8674 8787 8788

1 LED 5 W 1 QT 9-ax 20 W 1 QT 9-ax 20 W

A

B

C

D

50 w/ pow. suppl. unit Ø 120 909 95 30 320 w/o transformer Ø 120 909 110 30 320 with transformer Ø 120 909 130 30

B

4 Light sectors 60° each

Lamp Lumen

8675 8789 8790

1 LED 5 W 1 QT 9-ax 20 W 1 QT 9-ax 20 W

A

B

C

D

50 w/ pow. suppl. unit Ø 120 909 95 30 320 w/o transformer Ø 120 909 110 30 320 with transformer Ø 120 909 130 30

327


Drive-over in-ground luminaires to illuminate ground surfaces Installation depth 175 · 185 mm Pressure load 4000 kg Protection class IP 67

In-ground luminaires to illuminate ground surfaces, both indoors and outdoors. They are equipped with one, two or four light sectors or unshielded to meet different lighting situations. These luminaires are characterized by their capacity to withstand high pressure loads of 4000 kg. Their sturdy construction makes them suitable for areas where a high level of robustness is required. The luminaires are mounted in an installation housing made of high-strength die cast aluminium on a foundation which is designed to bear the pressure load. The foundation including drainage must be provided by the customer before installation. Vehicles with pneumatic tyres can drive over these luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. All technical data are given in the instructions for use for these luminaires. LED luminaires are also available on request in the light colours green, blue, yellow and red. Luminaires for this type of illumination but with smaller dimensions are given on page 326.

328


In-ground luminaires with LEDs or for low voltage tungsten halogen lamps, discharge lamps, signal lamps and fluorescent lamps Protection class IP 67 High-strength die cast aluminium and stainless steel Optical lens made of silica glass 8782 · 8783 White crystal glass with optical texture Light output from one, two or four sectors or unshielded with guard 8800 · 8801 · 8802 · 8804 Colour temperature 5500 K 1.5 m connecting cable H07RN8-F 3G 1.59 · with water stopper 1.2 m protective tube for underground cable up to connecting sleeve Colour graphite grey 1 Light sector 60°

Lamp Lumen

8800 8852 8853

3 LED 3 W 75 w/ p. suppl. unit Ø 220 255 175 55 with transf. Ø 220 255 175 55 1 QT 12-ax 50 W 910 1 HIT-TC-CE 35 W 3400 Ø 220 255 175 55

A

B

C

D

1 Light sector 180°

Lamp Lumen

8801 8854 8856

3 LED 3 W 75 w/ p. suppl. unit Ø 220 255 175 55 with transf. Ø 220 255 175 55 1 QT 12-ax 50 W 910 1 HIT-TC-CE 35 W 3400 Ø 220 255 175 55

A

B

C

D A

D

2 Light sectors 60° each

Lamp

8802 8857 8858

6 LED 6 W 150 w/ p. suppl. unit Ø 220 255 175 55 with transf. Ø 220 255 175 55 1 QT 12-ax 50 W 910 1 HIT-TC-CE 35 W 3400 Ø 220 255 175 55

Lumen

A

B

C

D

C

4 Light sectors 60° each

Lamp Lumen

8804 8859 8860

6 LED 6 W 150 w/ p. suppl. unit Ø 220 255 175 55 with transf. Ø 220 255 175 55 1 QT 12-ax 50 W 910 1 HIT-TC-CE 35 W 3400 Ø 220 255 175 55

A

B

C

D

B

Unshielded with guard

Lamp Lumen

8782 8783

1 Signal lamp 40 W 1 TC-D 13 W

A

B

C

D

230 Ø 220 255 185 60 900 Ø 220 255 185 60

329


Drive-over in-ground luminaires for the illumination of façades Installation depth 120 · 160 mm Pressure load 4000 kg Protection class IP 67

The construction of these in-ground floodlights allows complete illumination of a façade as far as the lower edge of the frieze. BEGA Patent DE 199 18 872. The lower limitation of light distribution is straight without creating the usual »light cone«. All material components in this series are made of die cast bronze and stainless steel. The luminaires are mounted in an installation housing on a foundation which is designed to bear the pressure loads. The foundation including drainage must be provided by the customer before installation. Vehicles with pneumatic tyres can drive over these luminaires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. Please note: The operating temperatures (T) in the centre of the glass surface are given in the table (measured according to EN 60 598 at an ambient temperature of 15 °C). All the exact temperatures and important technical data are given in the instructions for use for these luminaires.

330


180

290

350

440

In-ground floodlights for low voltage tungsten halogen lamps and discharge lamps Protection class IP 67 Light opening 90° Die cast bronze cover Stainless steel housing · Safety glass Reflector of pure anodized aluminium 1.5 m connecting cable H07RN8-F 3G 1.59 · with water stopper 1.2 m protective tube for underground cable up to connecting sleeve We supply a shield for these luminaires to reduce the light opening from 90° to either 30° or 60°. Shields are accessories and must be ordered separately. Square cover A

Lamp

Lumen

T

8612 8614 8615

1 QT 12-ax 35 W 1 HIT-TC-CE 35 W 1 HI/HST-DE 70 W

600 3400 6900

80° 80° 90°

Lumen

T

A

B

C

W 600 W 3400 W 6900 W 15 000

80° 80° 90° 125°

Ø 180 Ø 290 Ø 350 Ø 440

Ø 180 Ø 295 Ø 355 Ø 440

120 120 160 160

A

B

C

D

1809 Ø 180 120 40 2909 Ø 295 120 50 3509 Ø 355 160 65

676 677 678

Round cover

Lamp

8702 8718 8719 8720

1 1 1 1

QT 12-ax 35 HIT-TC-CE 35 HI/HST-DE 70 HI/HST-DE 150

A

D

40 50 65 70

676 677 678 679

A D

The following table is a planning aid. The type of luminaire and its arrangement are derived from the size of the illuminated object and the required illuminance. Planning aid 8612 QT 12-ax 35 W 8702 8614 HIT-TC-CE 35 W 8718 8615 HI/HST-DE 70 W 8719 8720 HI/HST-DE 150 W

A

shield

H

B

_ E

m   2.4 m   3.2 m   4.0 m   4.0 m   6.0 m   8.0 m   6.0 m   8.0 m 12.0 m 12.0 m 16.0 m 20.0

m   1.8 m   2.4 m   3.0 m   3.0 m   4.5 m   6.0 m   4.5 m   6.0 m   9.0 m   9.0 m 12.0 m 15.0

m   57 m   32 m   21 m   96 m   43 m   24 m   81 m   46 m   20 m   45 m   25 m   16

A 0.6 0.8 1.0 1.0 1.5 2.0 1.5 2.0 3.0 3.0 4.0 5.0

C

Emin lx   4.8 lx   2.7 lx   1.7 lx   9.8 lx   4.4 lx   2.5 lx   8.7 lx   5.2 lx   2.4 lx   5.4 lx   3.1 lx   1.9

A – distance between luminaires and façade H – height of façade q – average illuminance on façade E min – minimum illuminance

lx lx lx lx lx lx lx lx lx lx lx lx

B

B – distance between luminaires

331


On-ground luminaires with 180째 or 360째 light output with narrow beam or broad spread light distribution

These luminaires provide light from extremely low mounting heights for ground surfaces with either narrow beam or broad spread light distribution. Luminaires with narrow beam light distribution are particularly suitable for surface illumination of ground surfaces. These luminaires are designed to provide broad spread light distribution for orientation, indication and visual guidance in private and public areas. We supply these luminaires in two sizes and with single-sided 180째 light output or with rotationally symmetrical 360째 light output to meet the different requirements of their installation location. Dichroic colour effect filters to provide coloured light can be used in luminaires with narrow beam light distribution.

narrow beam light

broad spread light

8730 8773

8747 8847

450 cd/klm

8770 8772

8769 8784

420 cd/klm

332

60 cd/klm

60 cd/klm


light output 180°

light output 360°

On-ground luminaires with 180° or 360° light output for tungsten halogen lamps, discharge lamps and fluorescent lamps with narrow beam or broad spread light distribution Protection class IP 67 Die cast aluminium, aluminium and stainless steel · Cylindrical lens made of crystal glass 2 cable glands for connecting cable Ø 9 -15 mm · 3 x 49 connecting terminals 8747 · 8847 · 8769 · 8784 with electronic ballast BEGA on-ground luminaires are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows the luminaire to be adjusted during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units, page 506. We supply dichroic colour effect filters for the luminaires with narrow beam light to provide green or blue light. Colour effect filters are accessories and must be ordered separately. Colour graphite or silver graphite – article number silver – article number + A A

B

On-ground luminaires · 180° light output

Lamp Lumen

8730 8773

1 QT 18 75 W 1100 1 HIT-CE 35 W 3400

narrow beam narrow beam

170 190 230 230

A

B Anch. unit

895 896

269 270 269 270

8747 8847

1 TC-TEL 13 W 850 1 TC-TEL 26 W 1750

broad spread broad spread

170 190 230 230

895 896

On-ground luminaires · 360° light output

Lamp Lumen

8770 8772

1 QT 18 75 W 1100 1 HIT-CE 35 W 3400

narrow beam narrow beam

170 190 230 230

895 896

269 270 269 270

8769 8784

1 TC-TEL 13 W 850 1 TC-TEL 26 W 1750

broad spread broad spread

170 190 230 230

895 896

colour effect filters

A

B Anch. unit

333


Shielded bollards with rotationally symmetrical 360° light distribution

Shielded bollards with rotationally symmetrical light output. We supply these luminaires in two sizes to meet the different dimensions of their installation location. Depending on the type, the luminaires can be operated with incandescent lamps, fluorescent lamps or with discharge lamps. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 · 32 · 42 W lamps can be used in these luminaires. Crystal glass with light-diffusing texture distributes the light from the lamp onto the illuminated surface. These luminaires are exceptionally robust and designed for public and private areas. They are ideal to provide discreet additional lighting at a high level of illumination or highcontrast lighting at a low level of illumination.

5

8444

5

lx

4

1 A 60 75 W

4

0,15 0,25

3

8439

1 TC-T 26 W 0,2

0,4 2

0,6 2

1,0

1

1,9

m

1

2

5

3

4

5

0,2

2,2

m

1

5

lx

4

0,5

1,3

1

8449

1 TC-TEL 32 W

4 3

2

1

2,2 1

4

5

0,3

1

2,9 1

5

lx

4

0,5

2,1

m

8445

1 HME 50 W

4 3

2

3,9

m

1

2

4

5

8451

0,5

lx

0,8

3 1,5 2

2,0

1

3

1 HME 80 W

0,9 2

lx

0,7 1,3

3

5

5

8449

2

2

4

0,3

3

1,6

m

3

1 TC-TEL 42 W

1,0 2

lx

0,3

3

3

4

5

2,8

1

3,6

m

1

2

3

4

5


Shielded bollards with rotationally symmetrical 360° light distribution for incandescent lamps, fluorescent lamps and discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Crystal glass with optical texture 2 cable entries for connecting cable Ø 8 -17 mm · 5 x 49 connecting terminals The earth cable is introduced directly into the luminaire housing. 8449 with electronic ballast BEGA bollards are bolted to a foundation supplied by the customer or to an anchorage unit of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical date of anchorage units, page 506. Colour graphite or silver graphite – article number silver – article number + A

A

B

Incandescent lamps Lumen

8444

A

B Anch. unit

935

220 560

895

1 TC-T 26 W 1800 1 TC-TEL 42 W 3200

220 560 300 670

895 896

220 560 300 670

895 896

1 A 60

75 W

Fluorescent lamps

8439 8449

Discharge lamps

8445 8451

1 HME 1 HME

50 W 2000 80 W 4000

335


Bollards of diverse mounting heights with opposite light sectors of 180° and 5°

Unshielded bollards with two opposite light sectors of 180° and 5°. We supply these luminaires in two sizes and different heights to meet the diverse dimensions of their installation location. Depending on the type, the luminaires can be operated with incandescent lamps or fluorescent lamps. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 · 32 · 42 W lamps can be used in these luminaires. They provide location and direction illumination for gardens and parks, pathways and flights of steps. For luminaires with the same design features but with rotationally symmetrical 360° light output, see page 338.

8137

8139

1 A 60 60 W

2 1

1

0

4 2 1 0,5

0,2 lx

1

0

4 2 1 0,5

2 0

1

2

3

4

m

0

1

2

8138

1 TC-TEL 42 W

2 1

12 6

3 1,5 0,8 lx

1

8140

1 A 60 60 W

2

0

1,5 1

0,5 0,3 lx

2 0

1

2

3

4

m

0

1

2

8136

2

3

4

8143

1 TC-D 13 W

4

1

0

1

1 TC-TEL 42 W

2

0

2

0,5 0,3 lx

1

4

2

1

0,4 0,2 lx

2

2

336

4

1

2

m

3

1

0

m

0,2 lx

1

2 m

1 TC-D 13 W

2

4 0

1

2

3

4

m

0

2

4

6

8


Light output 180°/5°

Bollards of diverse mounting heights with double-sided light output 180°/5° for incandescent lamps and fluorescent lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel · Three-ply opal glass Connection box with 3 x 49 connecting terminals 8143 Door and connection box 632 8138 · 8143 with electronic ballast BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507 Colour graphite or white graphite – article number white – article number + W A

B

Bollards · Height  550 · 650 mm

Lamp Lumen

8139 8137 8138

1 A 60 60 W 710 1 TC-D 13 W 900 1 TC-TEL 42 W 3200

A

B Anch. unit

140 550 140 550 190 650

894 894 895

Bollards · Height  1000 · 1200 mm

Lamp Lumen

8140 8136 8143

1 A 60 60 W 710 1 TC-D 13 W 900 1 TC-TEL 42 W 3200

A

B Anch. unit

140 1000 140 1000 190 1200

895 895 896

337


Bollards of diverse mounting hights with 360° rotationally symmetrical light output

Unshielded bollards with 360° rotationally symmetrical light output. We supply these luminaires in two sizes and different heights to meet the diverse dimensions of their installation location. Depending on the type, the luminaires can be operated with incandescent lamps or fluorescent lamps. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 · 32 · 42 W lamps can be used in these luminaires. They are designed to provide location and indication lighting for gardens, parks, pathways and steps. Luminaires with the same design features but with 180° single-sided light output are given on page 336.

8426

5

1 A 60 60 W

4

8427

5

1 TC-D 13 W

4 lx

0,15

3

0,2

3

0,3 2

0,4 2

0,8

1

3,0

m

1

2

5

3

4

5

0,5

3,5

m

1

5

lx

4

0,8

1,0

1

8431

1 TC-TEL 42 W

4 3

2

1

13 1

4

5

0,2

1

2,1 1

10

lx

8

0,3

1,1

m

8429

1 TC-D 13 W

4 3

2

338

2,6

m

1

2

4

5

5

8433

lx

0,1 0,2

4

3

4

0,4

6

1,3

1

3

1 TC-TEL 42 W

0,6 2

lx

0,25 0,5

3

5

5

8428

2

2

4

0,15

3

4,2

m

3

1 A 60 60 W

1,6 2

lx

0,1

0,5

2

1,8

m

2

4

6

8

10


Light output 360°

Bollards of diverse mounting heights with 360° all-side light output for incandescent lamps and fluorescent lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel · Three-ply opal glass Connection box with 3 x 49 connecting terminals 8433 Door and connection box 632 8431 · 8433 with electronic ballast BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507 Colour graphite or white graphite – article number white – article number + W A

B

Bollards · Height  550 · 650 mm

Lamp Lumen

8426 8427 8431

1 A 60 60 W 710 1 TC-D 13 W 900 1 TC-TEL 42 W 3200

A

B Anch. unit

140 550 140 550 190 650

894 894 895

Bollards · Height  1000 · 1200 mm

Lamp Lumen

8428 8429 8433

1 A 60 60 W 710 1 TC-D 13 W 900 1 TC-TEL 42 W 3200

A

B Anch. unit

140 1000 140 1000 190 1200

895 895 896

339


Unshielded or shielded bollards

Unshielded or shielded bollards with rotationally symmetrical light output. Depending on the type, the luminaires can be operated with tungsten halogen lamps or with fluorescent lamps. These luminaires are supplied with three-ply opal glass to provide unshielded, uniform wide beam light or with crystal glass and louvred reflectors to provide shielded, directed light. They are designed to illuminate pathways, parks and driveways.

8437

8437

5

1 QT 32 60 W

4

lx

0,3 0,5

3 1,1 2 60 cd/klm 45째

8438

2,6

1

8,5

m

1

2

3

4

5

8438

5

1 TC-D 13 W

4

0,4

lx

0,6

3 1,1 2 60 cd/klm 45째

8436

2,7

1

9

m

1

2

3

4

5

8436

5

1 TC-D 13 W

4

0,15

lx

0,3

3 0,8 2 75 cd/klm 45째

340

2,4

1

11

m

1

2

3

4

5


unshielded

shielded

Bollards unshielded or shielded for tungsten halogen lamps and fluorescent lamps Protection class IP 54 Die cast aluminium, aluminium and stainless steel Three-ply opal glass or crystal glass with inside louvred reflector Connection box with 3 x 49 connecting terminals BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507 Colour graphite or silver graphite – article number silver – article number + A

A

A

B

B

Bollards · unshielded

Lamp Lumen

8437 8438

1 QT 32 60 W 790 1 TC-D 13 W 900

A

B Anch. unit

140 1000 140 1000

895 895

Bollards · shielded

Lamp Lumen

8436

1 TC-D 13 W

900

A

B Anch. unit

140 1000

895

341


Bollards with concentrated light output

Bollards with concentrated, rotationally symmetrical light output. These luminaires are available in two sizes to meet the diverse dimensions of their installation location. Depending on the type, they can be operated with incandescent lamps or with discharge lamps. The fitted cylindrical lens made of crystal glass concentrates the light horizontally. The luminaires are designed to illuminate paths, flower-beds and terraces.

Wall luminaires Page 186

8630

8630

5

1 A 60 100 W

4

1

lx

2

3 4,5 2 240 cd/klm 30째

8632

11

1

17

m

1

2

3

4

5

8632

5

1 A 65 150 W

4

1,5

lx

4

3 11 2 420 cd/klm 30째

8633

15

1

23

m

1

2

3

4

5

8633

5

1 HME 50 W

4

1,5

lx

2,5

3 5,5 2 180 cd/klm 30째

342

14

1

33

m

1

2

3

4

5


Bollards with concentrated light output for incandescent lamps and discharge lamps Protection class IP 55 Die cast aluminium, aluminium and stainless steel Cylindrical lens made of crystal glass 8630 Connection box with 3 x 49 connecting terminals 8632 路 8633 Connection box 632 BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507 Colour graphite

A

B

Incandescent lamps Lumen

8630 8632

1 A 60 100 W 1340 1 A 65 150 W 2160

A

B Anch. unit

140 800 165 1000

894 895

165 1000

895

Discharge lamps

8633

1 HME 50 W 2000

343


Unshielded or shielded bollards

Unshielded or shielded bollards with rotationally symmetrical light output. Depending on the type, the luminaires can be operated with discharge lamps or with fluorescent lamps. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 路 32 路 42 W lamps can be used in these luminaires. These luminaires are equipped with clear or white impact-resistant plastic diffusers. The white plastic diffuser produces unshielded, uniform wide beam light. The clear plastic diffuser with inside reflectors produces shielded, directed light. These luminaires are designed to illuminate pathways, parks and driveways. Luminaire 8746 is equipped with a switchable ballast. HSE-E 50 W, HSE-E 70 W or HIE-CE/S 70 W lamps can be fitted.

8745 8746

8745

5

1 HME 50 W

4

lx

0,6 1,2

3 2,6 2 72 cd/klm

5

24

30掳

m

1

8745

5

lx

4

1 HME 80 W

4

1,3 2,4

3

7,0

1

2

1

48 1

8746

4,6

3

10

4

5

0,2

12

m

2

4

1

lx

3

8

10

8755

4

5

8746

1 HIE-CE/S 70 W lx

0,2 0,4 0,9

4

6

2

6

2,4

2

43

8

0,8

4

1

10

0,4

12

m

8746

1 HSE-E 70 W

8 6

lx

2,1

2

2

5

1,2

3

14

m

4

1 HSE-E 50 W

5,2 2

3

2,5

2

13

m

2

4

6

8

10

8755

5

1 TC-TEL 26 W

4

lx

0,7 1,2

3 2,5 2 1

17

45掳

m

1

8755

10

lx

8

60 cd/klm

5

1 TC-TEL 32 W

4

1,0 1,7

3

5,8

2

344

23

m

1

2

8755

4

5

lx

0,3 0,7

4

3

5

0,18

6

8,0

1

4

1 TC-TEL 42 W

3,4 2

3

1,8

2

7,0

m

2

4

6

8

10


unshielded

shielded

Bollards unshielded or shielded for fluorescent lamps and discharge lamps Protection class IP 55 Die cast aluminium, aluminium and stainless steel White, impact-resistant plastic diffuser or clear, impact-resistant plastic diffuser with inside louvred reflector made of pure anodized aluminium Door and connection box 632 8755 with electronic ballast BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507 Colour graphite or silver graphite – article number silver – article number + A A

A

B

B

Bollards · unshielded

Lamp Lumen

8755

1 TC-TEL

42 W 3200

A

B Anch. unit

190 1200

896

Bollards · shielded

Lamp Lumen

8745 8746 8746

1 HME 50 · 80 W 4000 1 HSE-E 50 · 70 W 5600 1 HIE-CE/S 70 W 5900

A

B Anch. unit

190 1200 190 1200 190 1200

896 896 896

345


Bollards with rotationally symmetrical light output

Bollards with rotationally symmetrical light output. A reflector unit suppresses the glare from the discharge lamp and directs the broad spread light onto the illuminated surface. Luminaire 8741 is equipped with a switchable ballast. HSE-E 50 W, HSE-E 70 W or HIE-CE/S 70 W lamps can be fitted.

8740 8741

8740

5

1 HME 80 W

4

lx

1 2

3 4,5 2 72 cd/klm 30째

8741

10

1 HSE-E 70 W 1 HSE 50 W x 0,62 lx 0,15

8

0,3

6

12

1

39

m

1

2

2

12 2

4

5

1 HIE-CE/S 70 W

8

0,15

lx

0,3

6 0,7 4

2,0

m

4

8741

10

0,7 4

3

6

8

10

2,2

2

13

m

2

4

6

8

10


Bollards with rotationally symmetrical light output for discharge lamps Protection class IP 55 Die cast aluminium, aluminium and stainless steel Clear, impact-resistant plastic diffuser Reflector of pure anodized aluminium Door and connection box 632 BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507 Colour graphite or silver graphite – article number silver – article number + A

A

B

Lamp Lumen

8740 8741 8741

1 HME 50 · 80 W 4000 1 HSE-E 50 · 70 W 5600 1 HIE-CE/S 70 W 5900

A

B Anch. unit

190 1200 190 1200 190 1200

896 896 896

347


Shielded bollards with rotationally symmetrical light output

Shielded bollards in three sizes with rotationally symmetrical light output. Depending on the type, the luminaires can be operated with fluorescent lamps or with discharge lamps. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 · 32 · 42 W lamps can be used in these luminaires. Crystal glass with light-diffusing texture distributes the light from the lamp onto the light openings. The glass is not visible and therefore protected from wilful destruction. The sturdy construction of the luminaires makes them particularly suitable for areas where a high level of robustness is required. Glarefree light for gardens, residential areas, cycle paths and pathways. Luminaire 8440 is designed for private areas.

8440

8440

5

1 TC-D 13 W

4 0,2

3

lx

0,4 2 60 cd/klm 30°

9046

1,2

1

6,3

m

1

2

3

4

5

9046

5

1 TC-D 18 W

4

0,1

lx

0,3

3 0,5 2 75 cd/klm 30°

8446

1,6

1

8,2

m

1

2

3

4

5

8446

5

1 TC-TEL 42 W

4

0,9

lx

1,7

3 4,2 2 90 cd/klm 30°

9566

12

1

48

m

1

2

3

4

5

9566

5

1 HME 80 W

4

1

lx

2

3 5 2 90 cd/klm 30°

348

15

1

56

m

1

2

3

4

5


Bollards with rotationally symmetrical light output for fluorescent lamps and discharge lamps Protection class IP 55 Die cast aluminium, aluminium and stainless steel Crystal glass with optical texture 8440 · 9046 Connection box with 3 x 49 connecting terminals 8446 · 9566 Door and connection box 632 8446 with electronic ballast BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507 Colour graphite

A

B

C

Fluorescent lamps Lumen

8440 9046 8446

1 TC-D 13 W 900 1 TC-D 18 W 1200 1 TC-TEL 42 W 3200

A

B

C Anch. unit

155 800 110 200 1000 140 260 1200 190

894 895 896

260 1200 190

896

Discharge lamps

9566

1 HME 50 · 80 W 4000

349


Unshielded bollards with rotationally symmetrical light output

Luminaires with rotationally symmetrical light distribution. We supply these luminaires in two sizes to meet the diverse dimensions of their installation location. They are operated with fluorescent lamps. The light from the lamp is distributed uniformly by a white, impact-resistant plastic cylinder. These robust luminaires can delineate and structure outside areas. Their function is to locate, indicate and demarcate. They are designed to illuminate pathways, squares, parks and driveways.

8670

8670

10

1 TC-L 36 W

8 0,2

6 0,4

4 60 cd/klm 45째

8676

1,2

2

5,0

m

2

4

6

0,15

lx

0,25

6 0,5

4

350

10

1 TC-L 55 W

8

45째

8

8676

10

40 cd/klm

lx

0,1

1,4

2

6,0

m

2

4

6

8

10


Bollards for fluorescent lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel White plastic diffuser 8670 Connection box with 3 x 49 connecting terminals 8676 Connection box 632 8676 with electronic ballast BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows the luminaire to be adjusted during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507 Colour graphite or silver graphite – article number silver – article number + A

A

B

Lamp Lumen

8670 8676

1 TC-L 36 W 2900 1 TC-L 55 W 4800

A

B Anch. unit

160 850 230 1100

895 896

351


Bollards with rotationally symmetrical light output

Unshielded bollards with rotationally symmetrical light output. We supply these luminaires in three sizes to meet the diverse dimensions of their installation location. Depending on the type, the luminaires can be operated with tungsten halogen lamps, incandescent lamps or with fluorescent lamps. Robust luminaires with frosted crystal glass and safety guard made of die cast aluminium. They are designed to provide location and indication lighting for gardens and parks, pathways and steps.

Wall luminaires page 154

8114

2,5

1 QT 26 40 W

2

0,7

lx

2

2,5

1,1

1,5 2 1

4,2

0,5

8,5

m

0,5

1

1,5

5

8115

5

lx

4

1 A 60 60 W

4

0,2 0,3

3

8117

1 TC-D 13 W 0,15

0,6 2

0,6 2

1,7

1

5,6

m

1

2

3

5

4

5

0,3

1

5,4 1

5

lx

4

0,5

1,6

m

8116

1 TC-D 18 W

4 3

2

352

9,4

m

1

2

4

5

8119

0,6

lx

1,0

3 2,0 2

2,8

1

3

1 TC-D 26 W

1,1 2

lx

0,3

3

3

4

5

4,7

1

13

m

1

2

3

4

5


Bollards with rotationally symmetrical light output for tungsten halogen lamps, incandescent lamps and fluorescent lamps Protection class IP 65 8114 · 8117 Protection class IP 55 Die cast aluminium, aluminium and stainless steel Crystal glass with optical texture Connection box with 3 x 49 connecting terminals 8119 Door and connection box 632 BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507 Colour graphite or silver graphite – article number silver – article number + A

A

B

Tungsten halogen lamps Lumen

8114

A

B Anch. unit

460

110 800

894

710

140 1000

895

1 TC-D 13 W 900 1 TC-D 18 W 1200 1 TC-D 26 W 1800

110 800 140 1000 190 1300

894 895 896

1 QT 26 40 W

Incandescent lamps

8115

1 A 60

60 W

Fluorescent lamps

8117 8116 8119

353


Unshielded bollards with all-side light output

Unshielded luminaires with rotationally symmetrical light distribution. We supply these luminaires in two sizes to meet the diverse dimensions of installation locations. Depending on the type, they can be operated with incandescent lamps, fluorescent lamps or with discharge lamps. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 路 32 路 42 W lamps can be used in these luminaires. Equipped with hand-blown three-ply opal glass, the luminaires distribute the light softly and uniformly. They are suitable for private and public areas.

5

8442

5

lx

4

1 A 60 60 W

4

0,2 0,4

3

8434

1 TC-D 18 W 0,35

2

1,2 2

1,6

1

3,8

m

1

2

10

3

4

5

7,0

m

1

5

lx

4

0,15 0,25

2,6

1

8484

1 TC-TEL 42 W

8 6

2

354

2

4,8 2

4

4

5

9147

1,2

lx

2

3 3,6 2

1,3

m

3

1 HME 80 W

0,5 4

lx

0,6

3

0,7

6

8

10

7,7

1

17

m

1

2

3

4

5


8442 · 8434

8484 · 9147

Bollards with safety guard for incandescent lamps, fluorescent lamps and discharge lamps Protection class IP 65 8484 · 9147 Protection class IP 55 Die cast aluminium, aluminium and stainless steel · Three-ply opal glass 8442 · 8434 Connection box with 3 x 49 connecting terminals 8484 · 9147 Door and connection box 632 8484 with electronic ballast BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507 Colour graphite or white graphite – article number white – article number + W

A

B

Lamp Lumen

8442 8434 8484 9147

1 1 1 1

A 60 60 TC-D 18 TC-TEL 42 HME 50 · 80

W 710 W 1200 W 3200 W 4000

A

B Anch. unit

140 1000 140 1000 200 1200 200 1200

895 895 896 896

355


Bollards for indirect light directed downwards from different mounting heights

Luminaires with rotationally symmetrical light distribution. We supply these luminaires in two sizes and different heights to meet the different dimensions of their installation location. Depending on the type, they can be operated with tungsten halogen lamps or with discharge lamps. The light is deflected by the top reflector onto the illuminated surface. These luminaires are ideal where glarefree surface illumination is required for driveways, squares, pathways and entrances.

8544

5

1 QT 26 60 W

4

8547

5

1 HIT-CE 35 W

4 0,1

3

lx

0,2

0,25 2

8542

5

1 QT 26 60 W

4

1

4,8 1

2

5

3

0,15

lx

0,3

8,0

m

1

2

3,0

1

18

m

1

8543

10

lx

8

2

2

3

4

5

10

m

1

2

4

5

5

8546

lx

0,2 0,4

4

3

4

0,1

6

5,0

1

3

1 HIT-CE 70 W

1,5

1,5

1

5

0,6

3

0,4 2

4

1 HIT-CE 35 W

4

3

356

1,0 2

0,8

m

lx

0,4

3

1,5

2

10

m

2

4

6

8

10


Bollards for indirect light directed downwards from different mounting heights for tungsten halogen lamps and discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel · Crystal glass Reflector of pure anodized aluminium Connection box with 3 x 49 connecting terminals 8546 Connection box 632 BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507 Colour graphite or silver graphite – article number silver – article number + A

A

B

C

Bollards · Height 600 mm

Lamp Lumen

8544 8547

1 QT 26 60 W 790 1 HIT-CE 35 W 3400

A

B

C Anch. unit

260 600 140 260 600 140

894 894

Bollards · Height 800 · 1100 mm

Lamp Lumen

8542 8543 8546

1 QT 26 60 W 790 1 HIT-CE 35 W 3400 1 HIT-CE 70 W 7000

C

Anch.unit

260 800 140 260 800 140 340 1100 165

A

B

895 895 895

357


Bollards for indirect light directed downwards

Shielded luminaires in two sizes with rotationally symmetrical light distribution. The luminaires are operated with discharge lamps which are characterized by their high luminous efficacy and good colour-rendering property. The light is deflected by a reflector onto the illuminated surface. These luminaires provide glarefree surface illumination for driveways, squares, pathways and entrances.

5

8476

10

lx

8

1 HIT-CE 35 W

4

1,0 2,4

3

8477

1 HIT-CE 70 W 0,1

2

358

16

m

1

2

1,6

4

10

1

3

4

5

lx

0,3

6

5,6 5,2

2

10

m

2

4

6

8

10


Bollards for indirect light directed downwards for discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Crystal glass Reflector of pure anodized aluminium 8476 Connection box with 3 x 49 connecting terminals 8477 Connection box 632 BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507 Colour graphite or silver graphite – article number silver – article number + A

A

B

C

Lamp Lumen

8476 8477

1 HIT-CE 35 W 3400 1 HIT-CE 70 W 7000

A

B

C Anch. unit

260 800 140 400 1100 165

895 895

359


Bollards for directed light

Wall luminaires page 172

Luminaires for directed light with single-sided or double-sided light output. Depending on the type, the luminaires can be operated with incandescent lamps or discharge lamps. Glarefree, flat beam light with a high efficiency. They locate, demarcate and indicate, and are designed to illuminate, pathways, car park boundaries and driveways in both public and private areas.

8681

8681

8

1 A 60 100 W

6 4 2 8

150 cd/klm

2

0,5

0,2 lx

0 30째

8691

m

0

2

4

6

8

8691

8

1 HME 50 W

6 4 2 8

150 cd/klm

2 1 0,5

0,2 lx

0 30째

m

0

2

4

6

8

8682

8682

2 A 60 100 W

4 2 0

30

2 0,5 0,2 0,1 lx

2

150 cd/klm

4 30째

m

0

2

4

6

8

8692

8692

2 HME 50 W

4 2 0

150 cd/klm

3

2

4

0,5 0,2 0,1lx

4 30째

360

35

2

m

0

6

8


Single and double bollards for incandescent lamps and discharge lamps Protection class IP 55 Die cast aluminium, aluminium and stainless steel Crystal glass with optical texture Reflector of pure anodized aluminium Door and connection box 632 BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows the luminaire to be adjusted during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Colour graphite or white graphite – article number white – article number + W A

C

C

C

B

Single bollards

Lamp Lumen

8681 8691

1 A 60 100 W 1340 1 HME 50 W 2000

A

B

C Anch. unit

260 1200 260 260 1200 260

896 896

Double bollards

Lamp Lumen

8682 8692

2 A 60 100 W 2680 2 HME 50 W 4000

A

B

C Anch. unit

260 1200 345 260 1200 345

896 896

361


Shielded bollards with single-sided 180째 light output

Shielded bollards with single-sided 180째 light output. We supply these luminaires in two sizes to meet the diverse dimensions of their installation location. The luminaires are operated with discharge lamps which are characterized by their high luminous efficiency and good colour-rendering property. The light from the lamp is deflected by a reflector onto the illuminated surface at an angle of 180째. The sturdy construction of the luminaires makes them particularly suitable for areas where a high level of robustness is required. These luminaires are designed for orientation purposes and visual guidance in public and private areas. They are ideal where surface illumination is required e.g. for pathways, driveways or squares.

8513

8

1 HIT-CE 35 W

6 4 2

20 5

1 0,5 0,2 0,1 lx

0 m

0

2

4

6

8

8518

8

1 HIT-CE 70 W

6 4 2

20 5 2 1 0,5 0,2 lx

0 m

362

0

2

4

6

8


Light output 180°

Shielded bollards with single-sided 180° light output for discharge lamps Protection class IP 55 Die cast aluminium, aluminium and stainless steel · Borosilicate glass Reflector of pure anodized aluminium 8513 Connection box 632 8518 Door and connection box 632 BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows the luminaire to be adjusted during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Colour graphite or silver graphite – article number silver – article number + A

A

B

Lamp Lumen

8513 8518

1 HIT-CE 35 W 3400 1 HIT-CE 70 W 7000

A

B Anch. unit

165 800 220 1000

895 896

363


Bollards with rotationally symmetrical 360째 light output

Bollards with rotationally symmetrical 360째 light output. We supply these luminaires in three sizes to meet the diverse dimensions of their installation location. Depending on the type, the luminaires can be operated with tungsten halogen lamps or discharge lamps. A reflector suppresses the glare from the lamp and directs it as rotationally symmetrical broad spread light onto the illuminated surface. The sturdy construction of the luminaires makes them particularly suitable for areas where a high level of robustness is required. These luminaires are designed for orientation purposes and visual guidance in public and private areas.

8416

5

1 QT 32 75 W

4

8512

5

1 HIT-CE 35 W

4 lx

0,1

3

0,2

3

0,2 2

1,5 2

0,7

1

7,5

m

1

2

3

5

4

5

0,4

1

13 1

10

lx

8

0,7

9,6

m

8418

1 HME 50 W

4 3

2

18

m

1

2

3

10

0,1

5

m

2

4

6

8

10

8

10

9514

1 HME 125 W 0,2

lx

0,3 0,6

4

6

4

6

1

2

2

8

0,4

4

m

10

0,2

6

1,1 7,0

lx

lx

0,3

2

9514

1 HME 80 W

8

364

5

5

0,1

6

4

4

8415

4

4

1

3

1 HIE 70 W

1,4 2

lx

0,1

1,8

2

8,5

m

2

4

6

8

10


Light output 360°

Bollards with rotationally symmetrical 360° light output for tungsten halogen lamps and discharge lamps Protection class IP 55 Die cast aluminium, aluminium and stainless steel · Borosilicate glass 9514 Clear plastic diffuser Reflector of pure anodized aluminium 8416 · 8512 Connection box 632 8415 · 8418 · 9514 Door and connection box 632 BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Colour graphite or silver graphite – article number silver – article number + A

A

B

Tungsten halogen lamps Lumen

8416

1 QT 32

75 W 1050

A

B Anch. unit

165 800

895

165 800 220 1000 220 1000 300 1200

895 896 896 897

Discharge lamps

8512 8418 8415 9514

1 1 1 1

HIT-CE 35 HME 50 HIE 70 HME 80 ·125

W W W W

3400 2000 6400 6800

365


Shielded bollards with rotationally symmetrical light output

Shielded bollards with rotationally symmetrical light output. We supply these luminaires in three sizes to meet the diverse dimensions of their installation location. Depending on the type, they can be operated with fluorescent lamps or discharge lamps. Crystal glass with light-diffusing texture distributes the light from the lamp through the light openings. The glass is not visible and is therefore protected from wilful destruction. The sturdy construction of the luminaires makes them particularly suitable for areas where a high level of robustness is required. These luminaires are designed for orientation purposes and visual guidance in public and private areas.

Wall luminaires page 184

8482

5

1 TC-T 18 W

4

9483

5

1 HME 50 W

4 lx

0,1

3

0,1

0,4 2

0,8 2

1,6

1

5,2

m

1

2

3

5

4

5

0,3

1

8,6 1

5

lx

4

0,8

2,6

m

9485

1 HME 80 W

4 3

2

366

15,5

m

1

2

4

5

9485

0,5

lx

1,3

3 3,0 2

5,5

1

3

1 HME 125 W

1,9 2

lx

0,3

3

3

4

5

8,8

1

24

m

1

2

3

4

5


Bollards for fluorescent lamps and discharge lamps Protection class IP 55 Die cast aluminium, aluminium and stainless steel Crystal glass with optical texture 8482 Connection box with 3 x 49 connecting terminals 9483 · 9485 Door and connection box 632 BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Colour graphite, white or silver graphite – article number white – article number + W silver – article number + A

A

B

Fluorescent lamps Lumen

8482

A

B Anch. unit

18 W 1200

140 800

894

1 HME 50 W 2000 1 HME 80 ·125 W 6800

220 1200 300 1300

896 897

1 TC-T

Discharge lamps

9483 9485

367


Shielded bollards with four-sided light output

Shielded bollards with four-sided light output. We supply these luminaires in two sizes to meet the diverse dimensions of their installation location. Depending on the type, the luminaires can be operated with incandescent lamps or discharge lamps. They are shielded luminaires with broad spread light distribution. Crystal glass with light-diffusing texture distributes the light from the lamp through the four light openings. The glass is not visible and is therefore protected from wilful destruction. The sturdy construction of the luminaires makes them particularly suitable for areas where a high level of robustness is required.

8417

8417

5

1 A 60 75 W

4 3

0,1

48 cd/klm C 180 - C 0 C 225 - C 45

8419

1,8

1

8,5

m

1

2

3

0,1

3 1,3 6,0

1

30

m

1

2

3

0,2

3 1,4 5,7

1

28

m

1

2

3

0,3

3

lx

0,9 2,0

2

30째

5

1 HIE 70 W

4

C 180 - C 0 C 225 - C 45

4

8432

5

45 cd/klm

lx

0,4

2

8432

5

1 HME 80 W

4

C 180 - C 0 C 225 - C 45

4

8422

5

45 cd/klm

lx

0,3

2

8422

5

1 HIT-CE 35 W

4

C 180 - C 0 C 225 - C 45

4

8419

5

54 cd/klm

lx

0,4

2

8,4

1

42

m

1

2

3

4

5


Shielded bollards for incandescent lamps and discharge lamps Protection class IP 54 Die cast aluminium, aluminium and stainless steel Crystal glass with optical texture Reflector of pure anodized aluminium 8417 · 8419 Connection box 632 8422 · 8432 Door and connection box 632 BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows the luminaire to be adjusted during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Colour graphite

A

B

Incandescent lamps Lumen

8417

A

B Anch. unit

935

160 900

895

1 HIT-CE 35 W 3400 1 HME 80 W 4000 1 HIE 70 W 6400

160 900 220 1100 220 1100

895 896 896

1 A 60

75 W

Discharge lamps

8419 8422 8432

369


Unshielded bollards in different mounting heights

Wall luminaires page 114

Unshielded bollards with light output on all sides. We supply these luminaires in two sizes and different heights to meet the diverse dimensions of their installation location. Depending on the type, the luminaires can be operated with incandescent lamps or fluorescent lamps. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 · 32 · 42 W lamps can be used. They are robust luminaires with a square layout and safety guard. Thick-walled crystal glass with light-diffusing texture distributes the light uniformly. The sturdy construction of the luminaires makes them particularly suitable for areas where a high level of robustness is required. These luminaires are designed to demarcate and provide visual guidance in public and private areas, and to illuminate surfaces, such as pathways, driveways and squares, with light output on all sides.

5

8637

5

lx

4

1 A 60 100 W

4

0,2 0,35

3

8638

1 TC-D 18 W 0,15

0,7 2

0,5 2

1,8

1

7,0

m

1

2

5

3

4

5

0,5

6,5

m

1

5

lx

4

0,9

1,6

1

8646

1 TC-TEL 42 W

4 3

2

1

18 1

4

5

0,2

1

4,9 1

10

lx

8

0,4

2,0

m

8641

1 TC-D 18 W

4 3

2

370

3,7

m

1

2

4

5

5

8647

lx

0,2 0,5

4

3

4

0,1

6

1,5

1

3

1 TC-TEL 42 W

1,1 2

lx

0,5 0,9

3

5

5

8640

2

2

4

0,3

3

5,0

m

3

1 A 60 100 W

2,0 2

lx

0,3

3

1,2

2

4,8

m

2

4

6

8

10


Bollards in different mounting heights for incandescent lamps and fluorescent lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel · Crystal glass with optical texture 8637 8640 8647 8646

· 8638 · 8646 Connection box with 3 x 49 connecting terminals · 8641 Connection box 632 Door and connection box 632 · 8647 with electronic ballast

BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows the luminaire to be adjusted during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Colour graphite or silver graphite – article number silver – article number + A A

B

Bollards · Height 550 · 650 mm

Lamp Lumen

8637 8638 8646

1 A 60 100 W 1340 1 TC-D 18 W 1200 1 TC-TEL 42 W 3200

A

B Anch. unit

160 550 160 550 220 650

895 895 896

Bollards · Height 1100 · 1200 mm

Lamp Lumen

8640 8641 8647

1 A 60 100 W 1340 1 TC-D 18 W 1200 1 TC-TEL 42 W 3200

A

B Anch. unit

160 1100 160 1100 220 1200

895 895 896

371


Unshielded bollards

Unshielded bollards with light output on all sides. These luminous light elements with square layout are designed for public areas and equipped with a safety guard. They are especially suitable for delineating or structuring outside areas. They provide surface illumination for e.g. pathways, driveways and squares with light output on all sides. We supply these luminaires in two sizes to meet the different dimensions of their installation location. Wall luminaires whose shape and construction match the luminaires on this double page are given on page 160.

10

10

lx

8

0,25 0,4

6

10

m

2

4

0,3

6

8

10

lx

0,6 1,3

4

2,4

2

8679

1 TC-L 80 W

6

0,9

4

372

8678

1 TC-L 55 W

8

3,2

2

14

m

2

4

6

8

10


Bollards for fluorescent lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel White plastic diffuser 8678 Connection box 632 8679 Door and connection box 632 Electronic ballast BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows the luminaire to be adjusted during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Colour graphite or silver graphite – article number silver – article number + A

A

B

Lamp Lumen

8678 8679

1 TC-L 55 W 4800 1 TC-L 80 W 6000

A

B Anch. unit

160 1100 220 1200

895 896

373


Bollards with broad spread light distribution

Shielded bollards with broad spread light distribution. These luminaires are operated with discharge lamps which are characterized by their low connected power and high luminous efficiency. The light from the lamp is directed by a reflector onto the illuminated surface. These luminaires produce impressive light graphics and a high level of illuminance on the ground. Robust and striking, they delineate and structure outside areas. Their function is to locate, guide and demarcate. They are ideal for illuminating squares, driveways and entrances. For luminaires with the same design features but different dimensions, see page 426.

374

8645

5

1 HIT-TC-CE 35 W

4 3 2 5

1

20

m

1

2

1

2

lx

0,5

3

4

5


Bollards for discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Safety glass Reflector of pure anodized aluminium Connection box 632 Electronic ballast BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows the luminaire to be adjusted during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Colour graphite or silver graphite – article number silver – article number + A

A

B

Lamp Lumen

8645

1 HIT-TC-CE 35 W 3400

A

B Anch. unit

160 1000

895

375


Bollards with single-sided or double-sided light output

Shielded bollards with single-sided or double-sided light output. Equipped with inside louvre, they provide broad spread light distribution. The luminaires are operated with fluorescent lamps T 16 and equipped with electronic ballasts. They can be operated with lamps of the same length with two different light outputs. Depending on the lamp length, we supply these luminaires in three different heights. They can solve diverse design tasks and can be installed to meet the dimensions of their installation location. These luminaires are designed to demarcate and provide visual guidance in private and public areas. They are especially suitable for providing direction, indication or structure lighting. For luminaires with the same design features but different dimensions, see page 422.

8844

1 T16 24 W

2 1

2

0

25 10 5

2

1lx

1

10

3

1

2

3

4

5

m

15

4

5

0

2 1lx

1

4

6

8

10

1

2

3

4

2

m

1

0,5lx

2

4

6

8

10

8896

4

5 2 1 0,5 0,3 lx

0

1 T16 54 W

2 10 4

2

1 0,5 lx

4

6

8

2

4 0

m

1 T16 39 W

2

2

5

4 2

2

0

20

8895

1 T16 24W

1

0 2

8894

2

m

0,5 0,3lx

4 1

8846

1 T16 54 W

4 2

0 2

2 m

8845

1 T16 39 W

4

4 0

2

4

6

8

m

0

2


1500

1200

900

Bollards with single-sided or double-sided light output for fluorescent lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Safety glass with optical texture Reflector of pure anodized aluminium Connection box 632 Electronic ballast BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows the luminaire to be adjusted during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Colour graphite or silver graphite – article number silver – article number + A A

C

B

D

Single-sided light output

Lamp Lumen

8844 8845 8846

1 T 16 14 · 24 W 1750 1 T 16 21 · 39 W 3100 1 T 16 28 · 54 W 4450

A

B

C

D Anch. unit

95 900 155 190 95 1200 155 190 95 1500 155 190

896 896 896

Double-sided light output

Lamp Lumen

8894 8895 8896

1 T 16 14 · 24 W 1750 1 T 16 21 · 39 W 3100 1 T 16 28 · 54 W 4450

A

B

C

D Anch. unit

95 900 155 190 95 1200 155 190 95 1500 155 190

896 896 896

377


Shielded or unshielded bollards for fluorescent lamps

8447

1 TC-TEL 26 W

2 1

1

0

20 5 2 1 0,5 0,2 lx

1

0

8

4

2

3

4

5

m

1

2

8447

1 TC-TEL 32 W

378

1 20

5 2

1 0,5

lx

1

3

4

5

8441

1 TC-TEL 32 W

4

0

5 2 1 0,5

0,2

lx

2

2

4 1

2

3

4

5

m

2

4

8447

4

25 10 4 2 1 0,5 lx

0

1

6

8

10

8441

1 TC-TEL 42 W

2

1 TC-TEL 42 W

2

0 1

10 5

2

2

4

1 0,5

0,2 lx

2

2 m

0,5 lx

2

0

m

1

2 1

2

Robust luminaires with single-sided light output. They are available with shielded light source or white safety glass. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 · 32 · 42 W lamps can be used. Light output can be adjusted to meet the requirements of their installation location. These luminaires are designed to demarcate and provide visual guidance e.g. for pathways, driveways or squares. For recessed wall luminaires with the same design elements but with a different light distribution: to illuminate horizontal surfaces – see page 18 or to floodlight buildings – see page 21.

2

1

2 m

8441

1 TC-TEL 26 W

2

4 1

2

3

4

5

m

6

8

10


unshielded

shielded

Unshielded or shielded bollards for fluorescent lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel White safety glass or safety glass with grid Door and connection box 632 Electronic ballast BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows the luminaire to be adjusted during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Colour graphite

A

C

B

Bollard · unshielded

Lamp Lumen

8441

1 TC-TEL 42 W 3200

A

B

C Anch. unit

240 1000 110

896

Bollard · shielded

Lamp Lumen

8447

1 TC-TEL 42 W 3200

A

B

C Anch. unit

240 1000 110

896

379


Surface washers with flat beam light distribution

Luminaires for glarefree illumination of ground surfaces. The light from the lamp is deflected by a reflector onto the illuminated surface at an angle of 180°. Flat beam, broad spread light distribution is especially suitable for the illumination of forecourts, gateways and paths in both private and public areas. We supply these luminaires in two sizes to meet the diverse dimensions of their installation location. Depending on the type, the luminaires can be operated with tungsten halogen lamps, fluorescent lamps or discharge lamps. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 · 32 · 42 W lamps can be used. For luminaires with the same design features but different light distribution: for illuminating horizontal surfaces – see page 382 or for floodlighting buildings – see page 384.

8532

8532

4

1 QT 12-ax 50 W

3 2 25 10 5 2 1 0,5

1 240 cd/klm C 225 - C 45 C 270 - C 90

8533

lx

0 30°

m

0

1

2

3

4

8533

8

1 TC-TEL 42 W

6 4 10 5 2 1 0,5 0,2

2 180 cd/klm C 225 - C 45 C 270 - C 90

8539

lx

0 m

0

2

4

6

8

8539

8

1 HIT-TC-CE 20 W

6 4 8 3 1 0,5 0,2 0,1

2 300 cd/klm C 225 - C 45 C 270 - C 90

380

lx

0 m

0

2

4

6

8


Surface washers with flat beam light distribution to illuminate ground surfaces for low voltage tungsten halogen lamps, fluorescent lamps and discharge lamps GU 6.5 base Protection class IP 65 Die cast aluminium, aluminium and stainless steel Safety glass with optical texture Reflector of pure anodized aluminium 8532 8533 8532 8533

· 8539 Connection box with 3 x 49 connecting terminals Door and connection box 632 with electronic transformer · 8539 with electronic ballast

BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows the luminaire to be adjusted during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Colour graphite or silver graphite – article number silver – article number + A

A

C

B

Lamp Lumen

8532 8539 8533

1 QT 12-ax 50 W 910 1 HIT-TC-CE 20 W 1700 1 TC-TEL 42 W 3200

A

B

C Anch. unit

160 800 110 160 800 110 250 1100 140

894 894 895

381


Surface washers for horizontal surfaces

Luminaires providing glarefree illumination of ground surfaces. These luminaires are characterized by their high level of illuminance on the illuminated surface. Asymmetrical light distribution is especially suitable for in-depth illumination of squares, entrances and wide pathways in private and public areas. We supply these luminaires in two sizes to meet the diverse dimensions of their installation location. Depending on the type, these luminaires can be operated with tungsten halogen lamps or discharge lamps. For luminaires with the same design features but different light distribution: for floodlighting buildings – see page 384 or with flat beam light distribution e.g. for illuminating paths – see page 380.

Recessed wall luminaires page 14 8524

8524

1 QT 12-ax 50 W

2 1 0 420 cd/klm

25 8

2 0,5 0,2

lx

1 2 m

1

2

8549

3

4

5

8549

1 HIT-TC-CE 20 W

2 1 0 360 cd/klm

20

5

2

3

1 0,5 lx

2

1 2 m

1

4

5

8534

8534

1 HIT-CE 70 W

4 2 0 360 cd/klm

32 8 4 2

1

0,5lx

8

10

2 4 m

382

2

4

6


Surface washers for illuminating horizontal surfaces for low voltage tungsten halogen lamps and discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel · Safety glass Reflector of pure anodized aluminium 8524 8534 8524 8549

· 8549 Connection box with 3 x 49 connecting terminals Door and connection box 632 with electronic transformer with electronic ballast

BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows the luminaire to be adjusted during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Colour graphite or silver graphite – article number silver – article number + A

A

C

B

Low voltage tungsten halogen lamps

8524

Base Lumen

A

B

C Anch. unit

910

160 800 110

894

1 HIT-TC-CE 20 W GU 6,5 1700 G 12 7000 1 HIT-CE 70 W

160 800 110 250 1100 140

894 895

1 QT 12-ax

50 W GY 6,35

Discharge lamps

8549 8534

383


Surface washers in different mounting heights for discharge lamps up to 150 W

Surface washers with asymmetrical light distribution for discharge lamps 35 · 70 · 150 W. These luminaires are designed to illuminate and floodlight façades, parts of buildings or building details. They are ideal for all areas where surface light is required, and the construction of conventional floodlights makes them unsuitable for this purpose. We supply these luminaires in two sizes and different heights to meet the diverse dimensions of their installation location. Surface washers 400 mm and 550 mm in height are also suitable for ceiling and wall installation. For bollards with the same design features but different light distribution, see pages 380 - 383.

8322 8340

8323 8341

450 cd/klm

lx

8324 8342

480 cd/klm

8322 · 8340

1 HIT-TC-CE 35 W

200

420 cd/klm

E

160

C 90 - C 270 C 45 - C 225

lx

8323 · 8341

1 HIT-DE-CE 70 W

100 E

8323 · 8341

1 HST-DE 70 W E

lx

0 0,5

8324 · 8342

1 HIT-DE-CE 150 W

200

2

E

1,5

lx

2,5

3,5

4,5 m

8324 · 8342

1 HST-DE 150 W

250 E

12

120

12

160

12

200

60

8

90

8

120

8

150

8

40

4

60

4

80

4

100

4

20

0

30

0

40

0

50

80

1

384

lx 150

4

80 40

C 90 - C 270 C 45 - C 225

C 90 - C 270 C 45 - C 225

6

120

3

5

7

9

m

1

3

5

7

9

m

1

3

5

7

9

m

12

0 1

3

5

7

9

m


Surface washers in different mounting heights for discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel · Safety glass Reflector of pure anodized aluminium Connection box with 3 x 49 connecting terminals 8341 · 8342 Door and connection box 632 8322 · 8340 with electronic ballast These BEGA surface washers are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows adjustment of the luminaire during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. A

Colour graphite or silver graphite – article number silver – article number + A

C

A

C

B

B

Surface washers · Heights  400 and 550 mm

Lamp

8322 8323 8324

1 HIT-TC-CE 35 W 3400 1 HI/HST-DE 70 W 6900 1 HI/HST-DE 150 W 15 000

Lumen

A

B

C Anch. unit

160 400 110 250 550 140 250 550 140

894 895 895

Surface washers · Heights  800 and 1100 mm

Lamp

8340 8341 8342

1 HIT-TC-CE 35 W 3400 1 HI/HST-DE 70 W 6900 1 HI/HST-DE 150 W 15 000

Lumen

A

B

C Anch. unit

160 800 110 250 1100 140 250 1100 140

894 895 895

385


Bollards with rotationally symmetrical light output with optional connection chamber for power supply

The bollards on this double page are supplied with or without a connection chamber for the power supply. When equipped with a connection chamber, they provide not only lighting but a connection for electrically driven tools and a power supply for public and commercial facilities. These luminaires produce shielded light with broad spread light distribution. They operate with discharge lamps which are characterized by their high luminous efficiency and good colour rendering properties. The glass is not visible and therefore protected from wilful destruction. The sturdy construction of the luminaires makes them especially suitable for areas where a high level of robustness is required. On request, we also supply bollard 8455 with ordered installation inserts fitted and wired ready for connection. For other connecting pillars, see page 388.

Installation inserts for installation in the connection chamber of bollard 8455 Connection chamber for a maximum of 2 16 A · • CEE sockets 32 A · or • CEE sockets and for a maximum of 6 inserts 16 A · • CEE sockets 16 A · or • Safety socket outlets 5 0,4

lx

2,0

3

1 HIT-CE 70 W

8

386 · Teil II

0,25 4

7,2

1

10

m

1

2

lx

0,1

6

4,8 2

3

4

5

250 V y 250 V y

8481

10

4

inserts 400 V y 400 V y

0,5

2

7,2

m

2

4

6

8

10

Installation inserts

190 191 192 193

Safety socket outlet CEE socket CEE socket CEE socket

16 16 16 32

A A A A

· · · ·

250 250 400 400

V V V V

y y y y


bollard with connection chamber

bollard

Bollards with rotationally symmetrical light output for discharge lamps as • bollard · protection class IP 65 or • bollard with connection chamber · protection class IP X4 Die cast aluminium, aluminium and stainless steel · Safety glass Reflector of pure anodized aluminium 8480 · 8481 Door and connection box 632 8453 · 8455 with or without installation inserts Door and 5 x 259 connecting terminals · Three-phase mains connection For through-wiring · Neutral and PE terminal Security lock with 2 keys Luminaires are connected by 3 x 49 terminals with fuse BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Colour graphite A

B

Lamp Lumen

B

Anch. unit

8480 8481

Bollard Bollard

1 HIT-TC-CE 35 W 3400 70 W 7000 1 HIT-CE

190 1000 265 1200

896 896

8453

Bollard

1 HIT-CE

265 1000

896

35 W 3400

A

Con. chamber with 2 CEE sockets 16 A · 400 V y 3 CEE sockets 16 A · 250 V y 3 safety socket outlets 16 A · 250 V y 1 residual current device 40 A · 30 mA 2 automatic cut outs C-16 A 3 pol. 6 automatic cut outs C-16 A 1 pol. 8455

Bollard

Connection chamber without installation inserts + 2 fuse boxes 8 pcs

1 HIT-CE

35 W 3400

265 1000

896

387


Connecting pillars for power supply

Connecting pillars designed for the electrical connection of portable garden luminaires, electrically driven gardening tools, and to provide the power supply for public or commercial facilities. • Connecting pillars with installation inserts are wired in the factory ready for connection. • Connecting pillars without installation inserts allow you to choose the type and number of installation inserts to suit your particular requirement. These pillars are then supplied empty with the respectively ordered inserts. The installation must be carried out by the authorized electrician trade. The installation and operation of this equipment are subject to national electrical and electronic safety regulations. We can also supply connecting pillar 338 with ordered installation inserts fitted and wired ready for connection. Portable garden sockets are given on page 248.

Installation inserts for connecting pillars 382 · 380 Support and cover GRP · Colour graphite Installation inserts

170 176 177 178 179 171 172 173 174 175 180

Safety socket outlet 16 Safety socket outlet B/F 16 Safety socket outlet GB 13 Safety socket outlet US 20 Safety socket outlet CH 10 Rocker switch 10 Push switch, NOC 10 10 Control / Three-way switch Key-oper. switch, three-way 10 Key-oper. switch, pushbutton 10 Key cylinder for 174 +175

A A A A A A A A A A

· · · · · · · · · ·

250 250 250 125 250 250 250 250 250 250

V V V V V V V V V V

y y y y y y y y y y

Installation inserts for connecting pillar 338 for a maximum of 2 inserts • CEE sockets or • CEE sockets and for a maximum of 6 inserts • CEE sockets or • Safety socket outlets

16 A · 400 V y 32 A · 400 V y 16 A · 250 V y 16 A · 250 V y

Installation inserts

190 191 192 193

388

Safety socket outlet CEE socket CEE socket CEE socket

16 16 16 32

A A A A

· · · ·

250 250 400 400

V V V V

y y y y


We supply connecting pillars • for safety socket outlets + switch • for CEE sockets • lockable Die cast aluminium, aluminium and stainless steel BEGA connecting pillars are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data, page 507. Colour graphite

Connecting pillars for safety socket outlets + switch • with installation inserts • without installation inserts Protection class IP 44 Door and 4 x 49 connecting terminals Single-phase mains connection

125

500

75

155

Anchorage unit

375 376 377 378

Connecting Connecting Connecting Connecting

382 380

Connecting pillar without installation inserts for a maximum of 2 inserts Connecting pillar without installation inserts for a maximum of 4 inserts

pillar pillar pillar pillar

with with with with

2 1 4 3

895 895 895 895

safety socket outlets socket +1 switch safety socket outlets sockets +1 switch

Connecting pillars for CEE sockets • with installation inserts Protection class IP X4 Door and 4 x 49 connecting terminals Three-phase mains connection PE terminal

895 895

170

700

100

205

Anchorage unit

383 Connecting pillar with 4 CEE sockets 384 Connecting pillar with 2 CEE sockets and 2 CEE sockets

4 x 16 A · 250 V y 2 x 16 A · 250 V y 2 x 16 A · 400 V y

Connecting pillars · Lockable • with installation inserts • without installation inserts Protection class IP X4 Door and 5 x 259 connecting terminals Three-phase mains connection · for through-wiring Neutral and PE terminal Security lock with 2 keys

238 Con. pillar with 338

2 3 3 1 2 6

850

300

265

Anchorage unit

CEE sockets 16 A · 400 V y CEE sockets 16 A · 250 V y safety socket outlets 16 A · 250 V y residual current device 40 A · 30 mA automatic cut outs C-16 A 3 pol. automatic cut outs C-16 A 1 pol.

Con. pillar without installation inserts + 2 fuse boxes 8 pcs

895 895

896

896

389


Bollard and light building element · STAINLESS STEEL

Unshielded luminaires made of stainless steel and hand-blown three-ply opal glass. They are available as bollards 1000 mm and 1200 mm in height or as light building element 2400 mm in height. Stainless steel is a very robust and high-quality material. It is characterized by its practically unlimited durability. This is complemented by the robust and high-quality material three-ply opal glass with its incomparable lighting properties. These luminaires are also available on request with a white plastic cylinder. They are designed to illuminate paths, flower beds and patios.

8376

8376

5

1 TC-S 11 W

4

0,4

lx

0,7

3 1,5 2 80 cd/klm

8378

3,5

1

11,5

m

1

2

3

1 TC-D 26 W

8

0,1 0,5

4

1,2

2

5

m

2

4

6

10

1 TC-L 36 W

8

0,4

lx

0,7

6 1,3

4

390

8

8999

10

80 cd/klm

lx

0,25

6

8999

5

8378

10

80 cd/klm

4

2,8

2

7,5

m

2

4

6

8

10


Wall luminaires page 144

Bollards and light building element for fluorescent lamps Protection class IP 65 Stainless steel · Three-ply opal glass 8376 · 8378 Connection box with 3 x 49 connecting terminals 8999 Connection box 632 BEGA bollards and BEGA light building element are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507.

A

B

C

Bollards · Heights  1000 and 1200 mm

Lamp Lumen

8376 8378

1 TC-S 11 W 900 1 TC-D 26 W 1800

A

B

C Anch. unit

80 1000 175 110 1200 225

895 896

Light building element · Height  2400 mm

Lamp Lumen

8999

1 TC-L 36 W 2900

A

B

C Anch. unit

110 2400 225

896

391


Unshielded bollards · STAINLESS STEEL

Unshielded bollards or bollards with light louvres made of stainless steel and hand-blown glass. Luminaires whose shape and concept is determined by the material stainless steel. Stainless steel is a very robust and high-quality material. It is characterized by its practically unlimited durability. This is complemented by the robust and high-quality material three-ply opal glass with its incomparable lighting properties. The luminaires with light louvres have a low luminance and are therefore ideal to provide discreet additional lighting. The unshielded luminaires are designed for use where surrounding brightness is high or to provide high-contrast illumination where the level of lighting is low. On page 148 of this catalogue, you will find a description of wall luminaires and pillar luminaires whose shape and construction match the luminaires given on this double page. For light building elements, see page 394.

8121 8215

8125 8211

60 cd/klm C 180 - C 0 C 225 - C 45 C 270 - C 90

60 cd/klm C 225 - C 45 C 270 - C 90

45°

8121

1 TC-S 11 W

2 1

8125

1 TC-S 11 W

2 1

0

16 8 4

2

1 0,5 lx

1

0

16 8 4

1

2

3

m

4

0

1

2

8215

1 TC-D 26 W

2 8 4 2 1 0,5

0,2 lx

2

4

8211

1 TC-D 26 W

4

0

8 3

1 0,5

0,2 lx

2

4

4 0

2

4

6

m

8

8123

0

2

4

6

8

8213

30 cd/klm C 180 - C 0 C 225 - C 45 C 270 - C 90

30 cd/klm C 180 - C 0 C 225 - C 45 C 270 - C 90

45°

8123

2

45°

8213

1 TC-S 11 W

4

1

0

1

1 TC-D 26 W

2

0

64 2

0,5 0,25 lx

1

3

1 0,5 0,2 0,1 lx

2

2

392

3

2

0

m

1 0,5 lx

2 0

4

m

2

1

2 m

45°

4 0

1

2

3

4

m

0

2

4

6

8


Light sector 90° / 90°

Light sector 90° / 5°

Bollards for fluorescent lamps Protection class IP 65 Stainless steel · Three-ply opal glass 8121 · 8125 · 8123 Connection box 623 8215 · 8211 · 8213 Connection box 632 BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507.

A

B

C

Unshielded bollards

Lamp Lumen

8121 8215

1 TC-S 11 W 900 1 TC-D 26 W 1800

Light sector 90°/90° A

C

Anch. unit

80 950 175 110 1200 225

895 896

Unshielded bollards

Lamp Lumen

8125 8211

1 TC-S 11 W 900 1 TC-D 26 W 1800

Light sector 90°/5° C

Anch. unit

80 950 175 110 1200 225

A

895 896

Bollards with light louvres

Lamp Lumen

8123 8213

1 TC-S 11 W 900 1 TC-D 26 W 1800

B

B

Light sector 90°/90° C

Anch. unit

80 950 175 110 1200 225

A

B

895 896

393


Light building element for fluorescent lamps 路 STAINLESS STEEL

A group of elongated luminaires, available in two sizes. The shape and concept of these luminaires are determined by the material stainless steel. Stainless steel is a high-quality material which is characterized by its great stability and practically unlimited durability. This is also complemented by the durable and high-quality material three-ply opal glass with its incomparable lighting properties. The luminaires with light louvres have a low luminance and are therefore ideal to provide discreet additional lighting. The unshielded luminaires are designed for use where surrounding brightness is high or to provide high-contrast illumination where the level of lighting is low. Light building elements are luminaires which can delineate and structure outside areas. Their function is to locate, guide and demarcate. They are good design elements in architectural lighting.

8980

8989

8988

80 cd/klm

80 cd/klm

2

1 TC-L 36 W

4 2

0

5

2

1

0,5

0,2 lx

2

8

4

2

1

0,5 lx

4

6

8

10

m

8980

1 TC-L 24 W

4

4 2 1

0,5

0,2

lx

4

6

8

10

m

0

4

2

1

0,5 0,2 lx

2

4 2

8990

1 TC-L 36 W

4 2

0 2

4 2

40 cd/klm

2

0 2

4 m

50 cd/klm

8989

8988

1 TC-L 24 W

4

8990

4 2

4

6

8

10

m

2

4

6

8

10


Light sector 140°/140° Light sector 120°/5°

Light building elements for fluorescent lamps Protection class IP 65 Stainless steel · Three-ply opal glass 8988 · 8980 Connection box 623 8989 · 8990 Connection box 632 BEGA light building elements are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Free space of at least dimension - B - is required above the luminaire for relamping.

A

B

C

D

Unshielded light building element

Lamp Lumen

8988 8989

1 TC-L 24 W 1800 1 TC-L 36 W 2900

Light sector 140°/140° A

B

D

Anch. unit

80 620 2000 175 110 800 2500 225

896 896

Light build. elem. with light louvres

Lamp Lumen

8980 8990

1 TC-L 24 W 1800 1 TC-L 36 W 2900

C

Light sector 120°/5° A

B

D

Anch. unit

80 620 2000 175 110 800 2500 225

C

896 896

395


Bollards made of STAINLESS STEEL or aluminium with enamel finish

Shielded bollards with rotationally symmetrical light output. The light from the lamp is focused by a reflector onto a conical reflector. Illumination on the illuminated surface is rotationally symmetrical, broad spread and uniform. These luminaires are available in two sizes to meet the diverse dimensions of their installation location. They are operated with discharge lamps which are characterized by their high level of luminous efficiency and good colour rendering properties. These luminaires are available in two materials: STAINLESS STEEL or aluminium with enamel finish in the colour graphite. They are designed to illuminate footpaths, entrances and driveways in private and public areas.

8212

8212

5

1 HIT-CE 35 W

4

0,5

lx

2,2

3 5,6 2 72 cd/klm

8214

8,5

1

12

m

1

2

3

4

5

8214

10

1 HIT-CE 70 W

8 lx

0,15

6 0,3 4 60 cd/klm

8472

0,6

2

8,5

m

2

4

6

8

10

8472

5

1 HIT-TC-CE 35 W

4

0,5

lx

2,2

3 5,6 2 72 cd/klm

8474

8,5

1

12

m

1

2

3

4

5

8474

10

1 HIT-CE 70 W

8 lx

0,15

6 0,3 4 60 cd/klm

396

0,6

2

8,5

m

2

4

6

8

10


Stainless steel

Aluminium · graphite

Bollards for discharge lamps made of • stainless steel or • aluminium with enamel finish Protection class IP 65 Borosilicate glass Reflector of pure anodized aluminium 8212 · 8214 · 8472 Connection box 632 8474 Door and connection box 632 BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507.

A

A A

B B

B

8212 8214

8472 8474 C C

C

Stainless steel bollards

Lamp

Lumen

8212 8214

1 HIT-CE 35 W 1 HIT-CE 70 W

3400 7000

A

B

C Anch. unit

155 1000 240 205 1200 300

896 897

Aluminium bollards · Colour graphite

Lamp Lumen

8472 8474

1 HIT-TC-CE 35 W 3400 1 HIT-CE 70 W 7000

A

B

C Anch. unit

165 1000 165 190 1200 190

895 896

397


Shielded bollards · STAINLESS STEEL

Shielded bollards with rotationally symmetrical light output for fluorescent lamps. The light from the lamp is shielded by stainless steel louvres and directed onto the illuminated surface. We supply these luminaires in two sizes to meet the diverse dimensions of their installation location. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 · 32 · 42 Watt lamps can be used in these luminaires. A group of bollards whose construction is determined entirely by the material stainless steel. A material which meets the highest requirements with its great stability and durability. They are designed to illuminate footpaths, entrances and driveways in private and public areas.

8216

8216

5

1 TC-D 18 W

4

0,2

lx

0,4

3 0,9 2 72 cd/klm

8217

3

1

14

m

1

2

3

4

5

8217

5

1 TC-TEL 42 W

4

0,6

lx

1,3

3 3 2 72 cd/klm

398

10

1

35

m

1

2

3

4

5


Bollards for fluorescent lamps Protection class IP 65 Stainless steel · Borosilicate glass Stainless steel louvred reflector Connection box 632 8217 with electronic ballast BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507.

A

B

C

Lamp Lumen

8216 8217

1 TC-D 18 W 1200 1 TC-TEL 42 W 3200

A

B

C Anch. unit

155 1000 240 205 1200 300

896 897

399


Garden luminaires with small dimensions

Three luminaires for areas where small dimensions are required. Luminaires producing brilliant light and different light effects. Luminaire 8685 emits its light primarily in one direction and is especially suitable for illuminating paths, flights of steps or danger points. The swivel-mounted luminaire head of luminaire 8314 has great potential in many application areas. Apart from paths, the luminaire can illuminate building or garden details above itself. The rotationally symmetrical light distribution of luminaire 8582 is especially suitable for illuminating flower-beds, flowers and surfaces. These three luminaires complement each other in their light effect and can be used together in any garden.

2 1 0

50 15 5 2 1

0,5

lx

1 2 m

1

2

3

4

5

8582

2,5

1 QT 18 40 W

2

lx

0,4 0,7

1,5 1,8 1

5,5

0,5

21

m

0,5

1

1,5

2

2,5

8685

4

1 QT 18 40 W

3 2

1

0,5

0,2 lx

2,5 4,5 22

1 0 m

400

0

1

2

3

4


Garden luminaires for tungsten halogen lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel 8314 Safety glass 8582 Plastic diffuser with optical texture 8685 Crystal glass with optical texture 3 x 49 connecting terminals Only use Osram lamps, type 64467 AM ! BEGA garden luminaires are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows adjustment of the luminaire during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, page 507. Colour graphite or white graphite – article number white – article number + W

A

A

A

B

B

B

C

C

C

8314

8582

8685

8314 8582 8685

Lamp Lumen

Garden luminaire 1 QT 18 40 W 460 Garden luminaire 1 QT 18 40 W 460 Garden luminaire 1 QT 18 40 W 460

A

B

C Anch. unit

120 800 110 120 800 110 110 800 110

894 894 894

401


Unshielded garden luminaires

Unshielded luminaires in two sizes with rotationally symmetrical light distribution. They are equipped with hand-blown three-ply opal glass, with or without basket protector made of die cast aluminium. They produce pleasant, uniform light and are designed for private and public areas where there is no danger of wilful destruction. Wall luminaires page 156

8519

8519

5

1 TC-S 11 W

4

0,4

lx

0,7

3 1,4 2 80 cd/klm

8529

3,2

1

11,5

m

1

2

3

4

5

8529

5

1 TC-D 26 W

4

0,6

lx

1,1

3 2,4 2 60 cd/klm

8511

6,0

1

17

m

1

2

3

4

5

8511

5

1 TC-S 11 W

4

0,3

lx

0,5

3 1,1 2 50 cd/klm

8521

2,5

1

8,9

m

1

2

3

4

5

8521

5

1 TC-D 26 W

4

0,5

lx

0,8

3 1,7 2 40 cd/klm

402

4

1

14

m

1

2

3

4

5


Garden luminaires for fluorescent lamps 8511 · 8519 Protection class IP 44 8521 · 8529 Protection class IP 65 Die cast aluminium, aluminium and stainless steel Three-ply opal glass Connection box with 3 x 49 terminals BEGA garden luminaires are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units page 507. Colour graphite

A

A

B

C

B

C

Garden luminaires · Opal glass

Lamp Lumen

8519 8529

1 TC-S 11 W 900 1 TC-D 26 W 1800

C

Anch. unit

60 1000 110 80 1000 140

A

B

894 895

Garden luminaires · Opal glass with protective basket

Lamp Lumen

8511 8521

1 TC-S 11 W 900 1 TC-D 26 W 1800

C

Anch. unit

85 1000 110 110 1000 140

A

B

894 895

403


Unshielded garden luminaires

Unshielded luminaires in two sizes for fluorescent lamps with light output in one or two directions. They are designed to illuminate pathways and entrances in gardens and residential areas. These luminaires are impressive with their unshielded light surfaces at night and their clear, high-contrast shape during the day.

9677

1 TC-L 24 W

4 2

9774

1 TC-L 36 W

4 2

0

5,0 1,2 0,6

0,2

lx

2

0

23

4

1,3

0,5

2

4

6

8

4

4

m

2

4

6

8

10

m

9867

1 TC-L 24 W

4 2 11 4 2

0,4

0,2 lx

2

9976

1 TC-L 36 W

4

0

19 7 3,2

1

0,5 lx

2

4

404

10

2

0

m

lx

2

4 0

2

4

6

8

m

0

2

4

6

8


Garden luminaires for fluorescent lamps with one-sided or two-sided light output Protection class IP 44 Die cast aluminium, aluminium and stainless steel 9677 · 9867 Three-ply opal glass 9774 · 9976 White plastic diffuser Removable front plate 3 x 49 connecting terminals BEGA garden luminaires are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. The BEGA mounting system allows adjustment of the luminaire during installation. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units page 507. Colour graphite

A

C

B

D

Garden luminaires · One-sided light output

Lamp Lumen

9677 9774

1 TC-L 24 W 1800 1 TC-L 36 W 2900

A

B

C

D Anch. unit

120 1000 110 175 160 1500 110 240

895 896

Garden luminaires · Two-sided light output

Lamp Lumen

9867 9976

1 TC-L 24 W 1800 1 TC-L 36 W 2900

A

B

C

D Anch. unit

120 1000 145 175 160 1500 145 240

895 896

405


Unshielded bollards

Unshielded bollards with rotationally symmetrical light distribution. We supply these luminaires in three sizes to meet the diverse dimensions of their installation location. Depending on the type, the luminaires can be operated with incandescent lamps or fluorescent lamps. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 · 32 · 42 W lamps can be used in these luminaires. The light is distributed by a cylindrical lens made of silica glass which is shielded to the top. These luminaires with their pleasant and uniform light effect are designed for private and public areas where there is no danger of wilful destruction.

5

8490

5

lx

4

1 A 60 60 W

4 0,1

3

9137

1 A 60 100 W

0,5

3

0,2 2

1 2

0,5

1

2,5

m

1

2

3

5

4

5

0,2

9,5

m

1

5

lx

4

0,4

3

1

8491

1 TC-D 13 W

4 3

2

1

6,7 1

10

4

5

0,1

1

10 1

10

lx

8

0,2

3

m

8499

1 TC-TEL 32 W

8

2

406

4,4

m

2

4

4

5

8499

0,15

lx

0,25

6 0,5 4

1,0

2

3

1 TC-TEL 42 W

0,4 4

lx

0,5 1

3

6

5

9059

2

2

4

0,3

3

2,2

m

3

1 TC-D 18 W

0,8 2

lx

0,3

6

8

10

1,3

2

5,4

m

2

4

6

8

10


Wall luminaires page 152

Bollards for incandescent lamps and fluorescent lamps Protection class IP 55 Die cast aluminium, aluminium and stainless steel Frosted crystal glass Aluminium glass cover 8499 with electronic ballast 8490 · 8491 Connection box with 3 x 49 terminals 9137 · 9059 Connection box 632 8499 Door and connection box 632 BEGA bollards are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units and connection boxes, pages 506 - 507. Colour graphite

A

B

C

Incandescent lamps Lumen

8490 9137

A

B

C Anch. unit

60 W 710 100 W 1340

135 800 110 165 1000 140

894 895

1 TC-D 13 W 900 1 TC-D 18 W 1200 1 TC-TEL 42 W 3200

135 800 110 165 1000 140 265 1200 190

894 895 896

1 A 60 1 A 60

Fluorescent lamps

8491 9059 8499

407


Unshielded or shielded garden luminaires

Unshielded or shielded luminaires for incandescent lamps and fluorescent lamps. The light effect of these luminaires is pleasant and uniform. They are designed for private and public areas where there is no danger of wilful destruction. Luminaires with shielded light source to provide glarefree surface illumination from low mounting heights. They can be used for many lighting situations around houses, on patios, in gardens and parks.

5

9734

5

lx

4

1 A 60 100 W

4

0,5 1

3

8836

1 TC-T 26 W 0,7

2 2

2,5 2

4,5

1

13

m

1

2

3

5

4

5

0,5

18

m

1

5

lx

4

0,8

6,0

1

9837

1 A 60 100 W

4 3

2

1

11 1

4

5

9584

5

1 TC-D 13 W

4

5,2

1

15

m

1

2

5

4

lx

0,1

0,1

9

m

1

5

lx

4

0,3

3 2

2

9586

9685

1 HME 80 W 0,4

3

4

5

3,2 2

4

1

20

m

1

2

lx

1,2

3

0,9

1

1

5

1 HME 50 W

0,2

408

3

4

2

lx

1,1 2,2

3

3

5

8664

2

2

4

0,6

3

4

m

3

1 TC-D 18 W

1,6 2

lx

1,2

3

3

4

5

12

1

62

m

1

2

3

4

5


Garden luminaires for incandescent lamps and fluorescent lamps Protection class IP 55 Die cast aluminium, aluminium and stainless steel Three-ply opal glass or crystal bubble glass Connection box with 3 x 49 BEGA garden luminaires are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical dataA of anchorage units, page 507. Colour graphite A

Garden luminaires · Three-ply opal glass

B

Lamp Lumen

9734 8836

1 A 60 100 W 1340 B 1 TC-T 26 W 1800

C

Anch. unit

250 1100 140 250 1100 140

A

B

895 895

Garden luminaires · Crystal bubble glass

C

Lamp Lumen

9837 8664

1 A 60 100 W 1340 C 1 TC-D 18 W 1200

C

Anch. unit

250 1100 140 250 1100 140

A

B

895 895

Garden luminaires for fluorescent lamps and discharge lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel Impact-resistant plastic diffuser with optical texture Connection box with 3 x 49 BEGA garden luminaires are bolted with a mounting plate A to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units, page 507. Colour graphite

A

B B

C

Garden luminaires · Impact-resistant plastic diffuser

Lamp Lumen

9584 9586 9685

1 TC-D 13 W 900 1 HME 50 W 2000 C 1 HME 80 W 4000

A

B

C

220 1000 140 300 1100 140 400 1200 220

Anch. unit

895  895  896

409


Shielded garden luminaires

Luminaires in single and double configuration with shielded light source. These robust luminaires provide glarefree lighting for paths, driveways and many areas of garden architecture. Luminaires for incandescent lamps or fluorescent lamps. Pole-top luminaires with the same shape but larger dimensions are given on page 484.

8873

1 A 60 60 W

2 1

8871

1 TC-T 18 W

2 1

0

7,6 1,5

0,4

0,1

lx

1

0

13 2,5

2 1

2

3

4

5

m

1

2

3

8874

2 A 60 60 W

2 1

4

5

8872

2 TC-T 18 W

2 1

0

0,6 0,2 lx

2,1

12

1

0

1,1 0,4 lx

4

20

1

2

410

lx

2

m

m

0,6 0,3

1

2 0

1

2

3

4

m

0

1

2

3

4


Wall luminaires page 194

Single or double garden luminaires for incandescent lamps and fluorescent lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Crystal glass with optical texture Connection box with 3 x 49 terminals BEGA garden luminaires are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. Technical data of anchorage units, page 507 Colour graphite, white or silver graphite – article number white – article number + W silver – article number + A A

A

B

C

Single garden luminaires

Lamp Lumen

8873 8871

1 A 60 60 W 710 1 TC-T 18 W 1200

C

Anch. unit

280 1200 140 280 1200 140

A

B

895 895

Double garden luminaires

Lamp Lumen

8874 8872

2 A 60 60 W 1420 2 TC-T 18 W 2400

A

B

C

560 1200 140 560 1200 140

Anch. unit

895  895

411


Surface washers

Surface washers in single and double configuration providing uniform lighting for ground surfaces. We supply two types of these surface washers: as building element ready for installation with a total height of 1200 mm, or as pole-top luminaire for BEGA luminaire poles of heights 2000 or 2500 mm. The luminaire poles must be ordered separately. The flat beam, broad spread light distribution is especially suitable for illuminating driveways and paths. The luminaires are equipped with electronic ballasts. 26 · 32 · 42 W lamps can be used in these luminaires. Safety socket outlets and switches can be installed in the poles on request – see page 506.

8875

1 TC-TEL 42 W H = 1,0 m

4 2

2

0

20

4

1

0,3 0,1 lx

2

20 5 2 1 0,5 0,2

2

4

6

8

m

lx

25 10 4 2

1 0,5 lx

2

4

6

8

m

0

50 15 5

2

1 0,5 lx

2

4 0

8932

2 TC-TEL 42 W H = 2,5 m

4 2

0 2

4 0

8931

1 TC-TEL 42 W H = 2,5 m

4 2

0 2

4 m

8876

2 TC-TEL 42 W H = 1,0 m

4

4 0

2

4

6

8

m

0

2

4

6

8


Single and double surface washers for fluorescent lamps Height 1200 mm or for pole heights 2000 or 2500 mm Protection class IP 65 Die cast aluminium, aluminium and stainless steel · Safety glass Reflector of pure anodized aluminium Electronic ballast • 8875 · 8876 Surface washers · height 1200 mm Cylindrical pole Ø 80 mm with base plate Ø 140 mm Connection box with 3 x 49 terminals

These BEGA surface washers are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately.

• 8931 · 8932 Surface washers for poles of heights 2000 or 2500 mm In the table, we recommend BEGA luminaire poles whose surface finish, colour, design and static features match the pole-top luminaires on this double page. A complete overview including technical data of all BEGA luminaire poles, anchorage units and sections, and connection boxes is given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

A

C

C

B

Surface washers · height 1200 mm

Lamp Lumen

8875 8876

1 TC-TEL 42 W 3200 2 TC-TEL 42 W 6400

A

single double

C

Anch. unit

260 1200 360 260 1200 640

B

895 895

B

A

B

A

C

C

C

C

Surface washers · for luminaire poles 2000 or 2500 mm

Lamp Lumen

8931 8932

1 TC-TEL 42 W 3200 single 2 TC-TEL 42 W 6400 double

A

B

Luminaire poles C

260 190 360 260 190 640

Height

Top

2000 - 2500 Ø 60 2000 - 2500 Ø 60

Pole

Group

740 · 741 32 740 · 741 32

Pole

Group

907 · 722 12 907 · 722 12

413


Garden luminaires or pole-top luminaire

Luminaires in single and double configuration providing glarefree lighting for paths, steps and gardens. We supply two types of these surface washers: as building element ready for installation with a total height of 1200 mm, or as pole-top luminaire for BEGA luminaire poles of height 2000 mm – see table. The luminaire poles must be ordered separately. Luminaires of this type are also available in triple configuration. Safety socket outlets and switches can be installed in the poles on request – see page 506. For wall luminaires whose shape and construction match the luminaires on this double page, see page 180.

9495

5

1 A 60 60 W H = 0,95 m lx 0,2

4

0,4

3

9863

5

1 TC-T 18 W H = 0,95 m lx 0,3

4

0,6

3

1 2 11

m

1

2

3

414

lx

0,1

6

2

5

1 A 60 60 W H = 2,0 m

8

m

4

9841

10

0,3

4

1

3

18

m

1

2

10

5

9881

lx

0,2

6

2

4

1 TC-T 18 W H = 2,0 m

8

m

8

3

10

3,5 6

2

0,5

2 TC-T 18 W H = 0,95 m lx 0,6

4

1,3

3

22

m

1

2

4

5

9842

2 A 60 60 W H = 2,0 m lx 0,1 0,2

6

2 10

3

8

m

8

2

10

5,3 6

2,6 2

5

1

9

1

36

m

1

0,4 0,8 2,6

2

10,6

2

2

10

5

9873

m

8

4

2 TC-T 18 W H = 2,0 m lx 0,3

8

6 6

3

10

4

1,5

4

2

6

0,5

4

1,3

4

9864

5

2 2

4

1

4

0,8

4

2 A 60 60 W H = 0,95 m lx 0,4

4

1,3 2

2,5

1

9496

5

4

6

8

10


Single and double garden luminaires or pole-top luminaires for incandescent lamps and fluorescent lamps Garden luminaires height 1200 mm or pole-top luminaires for pole height 2000 mm Protection class IP 44 Die cast aluminium, aluminium and stainless steel · Three-ply opal glass • 9495 · 9863 · 9496 · 9864 Garden luminaires · height 1200 mm Cylindrical pole Ø 82 mm with base plate Ø 140 mm Connection box with 3 x 49 terminals These BEGA garden luminaires are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. • 9841 · 9881 · 9842 · 9873 Pole-top luminaires for pole height 2000 mm In the table, we recommend BEGA luminaire poles whose surface finish, colour, design and static features match the pole-top luminaires on this double page. A complete overview including technical data of all BEGA luminaire poles, anchorage units and sections, and connection boxes is given on pages 500 - 507. Colour graphite or white graphite – article number white – article number + W

B A

A

C

C

B

Garden luminaires · height 1200 mm

Lamp Lumen

C

Anch. unit

9495 9863

1 A 60 60 W 710 1 TC-T 18 W 1200

single single

260 1200 370 260 1200 370

A

B

895 895

9496 9864

2 A 60 60 W 1420 2 TC-T 18 W 2400

double double

260 1200 660 260 1200 660

895  895

B

C

A

C

Pole-top luminaires · for luminaire poles 2000 mm

Lamp Lumen

9841 9881 9842 9873

1 1 2 2

A 60 TC-T A 60 TC-T

60 18 60 18

W 710 W 1200 W 1420 W 2400

single single double double

Luminaire poles

A

B

C

Height

260 260 260 260

260 260 260 260

370 370 660 660

2000 2000 2000 2000

Top Pole Ø 60 Ø 60 Ø 60 Ø 60

740 740 740 740

Group Pole

Group

907 907 907 907

12 12 12 12

32 32 32 32

415


Garden luminaires or pole-top luminaires

Luminaires in two different heights providing shielded lighting for paths, steps and gardens. We supply two types of these luminaires: as building element ready for installation with a total height of 1300 mm, or as pole-top luminaire for BEGA luminaire poles of height 2000 mm – see table. The luminaire poles must be ordered separately. Safety socket outlets and switches can be installed in the poles on request – see page 506. For wall luminaires whose shape and construction match the luminaires on this double page, see page 182.

9497

5

1 A 60 60 W H = 0,95 m lx 0,2

4

0,5

3

9925

5

1 TC-T 18 W H = 0,95 m lx 0,4

4

0,8

3

1 2 12

m

1

2

3

416

lx

0,1

6 0,5

4 2

5

1 TC-T 18 W H = 2,0 m

8

m

4

9926

10

20

m

1

2

10

5

9890

0,2

6

2

4

2 A 60 60 W H = 2,0 m lx 0,1

8

m

8

3

10

5,3 6

2

0,3 0,8

2

3,3

m

2

0,4 0,8 2,6

2

12

2

2

10

10

9927

m

8

8

2 TC-T 18 W H = 2,0 m lx 0,1

8

4

6

6

10

7,5 4

4

6

0,5 1,6

lx

0,1

6 4

5,3

1

4

1,3

4

1 A 60 60 W H = 2,0 m

8

1,6 2

3,3

1

9889

10

4

6

8

10


Single and double garden luminaires or pole-top luminaires for incandescent lamps and fluorescent lamps Garden luminaires height 1300 mm or pole-top luminaires for pole height 2000 mm Protection class IP 44 Die cast aluminium, aluminium and stainless steel · Three-ply opal glass • 9497 · 9925 Garden luminaires · height 1300 mm Cylindrical pole Ø 82 mm with base plate Ø 140 mm Connection box 3 x 49 with terminals These BEGA garden luminaires are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. • 9889 · 9926 · 9890 · 9927 Pole-top luminaires for luminaire poles height 2000 mm In the table, we recommend BEGA luminaire poles whose surface finish, colour, design and static features match the pole-top luminaires on this double page. A complete overview including technical data of all BEGA luminaire poles, Banchorage units and sections, and connection boxes is given on pages 500 - 507. Colour graphite or white graphite – article number white – article number + W

A

A

C

B

Garden luminaires · height 1300 mm

Lamp Lumen

9497 9925

1 A 60 60 W 710 1 TC-T 18 W 1200

A

single single

C

Anch. unit

320 1300 430 320 1300 430

B

895 895

B

C

A

C

Pole-top luminaires · for luminaire poles 2000 mm

Lamp Lumen

9889 9926 9890 9927

1 1 2 2

A 60 TC-T A 60 TC-T

60 18 60 18

W 710 W 1200 W 1420 W 2400

single single double double

A

B

320 320 320 320

585 585 620 620

Luminaire poles C

430 430 820 820

Height

2000 2000 2000 2000

Top Pole Ø 60 Ø 60 Ø 60 Ø 60

740 740 740 740

Group Pole

Group

907 907 907 907

12 12 12 12

32 32 32 32

417


Garden luminaires or pole-top luminaires

Luminaires in two different heights providing shielded lighting for paths, steps and gardens. The luminaires, equipped with three-ply opal glass, primarily direct their light downwards. A small part of the light however exits upwards through the openings in the shade reflector and accentuates the shape of the luminaire at night. We supply two types of these luminaires: as building element ready for installation with a total height of 1300 mm, or as pole-top luminaire for BEGA luminaire poles of height 2000 mm – see table. The luminaire poles must be ordered separately. Luminaires of this type in triple configuration are also available. Safety socket outlets and switches can be installed in the poles on request – see page 506.

8735

5

1 A 60 75 W H = 1,0 m lx 0,1

4

0,2

3

8736

5

1 TC-T 18 W H = 1,0 m lx 0,1

4

0,3

3

0,6 2 10

m

1

2

3

4

5

8935

5

1 A 60 75 W H = 2,0 m lx 0,4

4

0,7

3

1 m

15

m

1

2

418

3

4

5

8936

5

1 TC-T 18 W H = 2,0 m lx 0,5

4

11

1

1

m

3

4

5

1

0,6 1,7

2

22

m

1

2

3

4

5

8937

5

2 A 60 75 W H = 2,0 m lx 0,7

4

1,5

3

6

1

31

m

1

2

16

1

1

m

3

4

5

4

5

8939

2 TC-T 18 W H = 2,0 m lx 1

4

2

3 4,9 2

6,6

12

23

1

32

1

m

1

2

3

5

3,5 2

6

2

2 TC-T 18 W H = 1,0 m lx 0,3

4 3

4,2

1

2,4 2

8738

5

1,2

3

1

3

4,2

2

0,5

3 2

1,7 2

2 A 60 75 W H = 1,0 m lx 0,2

4

0,8 2

2

1

8737

5

3

4

5

2

3

4

5


Single and double garden luminaires or pole-top luminaires for incandescent lamps and fluorescent lamps Garden luminaires height 1300 mm or pole-top luminaires for luminaire poles of height 2000 mm Protection class IP 44 Die cast aluminium, aluminium and stainless steel · Three-ply opal glass • 8735 · 8736 · 8737 · 8738 Garden luminaires · height 1300 mm Cylindrical pole Ø 82 mm with base plate Ø 140 mm Connection box 3 x 49 with terminals These BEGA garden luminaires are bolted with a mounting plate to a foundation supplied by the customer or to an anchorage unit made of galvanized steel. Anchorage units are accessories and must be ordered separately. • 8935 · 8936 · 8937 · 8939 Pole-top luminaires for luminaire poles of height 2000 mm In the table, we recommend BEGA luminaire poles whose surface finish, colour, design and static features match the side-mounted pole-top luminaires on this double page. A complete overview including technical data of all BEGA luminaire poles, anchorage units and sections, and connection boxes is given on pages 500 - 507.

B

Colour graphite or white graphite – article number white – article number + W A

A

C

C

B

Garden luminaires · height 1300 mm

Lamp Lumen

8735 8736 8737 8738

1 1 2 2

A 60 TC-T A 60 TC-T

75 18 75 18

W 935 W 1200 W 1870 W 2400

A

single single double double

B

C

260 1300 260 1300 260 1300 260 1300

360 360 640 640

Anch. unit

895 895  895  895

B

A

C

C

Pole-top luminaires · for luminaire poles 2000 mm

Lamp Lumen

8935 8936 8937 8939

1 1 2 2

A 60 TC-T A 60 TC-T

75 18 75 18

W 935 W 1200 W 1870 W 2400

single single double double

A

B

260 260 260 260

630 630 630 630

Luminaire poles C

360 360 640 640

Height

2000 2000 2000 2000

Top Pole Ø 60 Ø 60 Ø 60 Ø 60

740 740 740 740

Group Pole

Group

907 907 907 907

12 12 12 12

32 32 32 32

419


BEGA Light building element · unshielded

Light building elements are luminous design features for public areas. They are especially suitable for delineating and structuring outside areas. They can guide or direct pedestrians and traffic. The awareness level for these luminaires is markedly higher than for pole-top luminaires. Light building elements can harmonize with or even highlight the respective architectural structure. The light building elements on this double page are unshielded with all-round light output. We supply these luminaires in three sizes to meet the different dimensions of their installation location. Luminaire 8994 is operated with fluorescent lamps T 16 and equipped with electronic ballasts. 28 W or 54 W lamps can be used in these luminaires. They can also be supplied with a base plate on request. All technical data are given in the instructions for use for these luminaires. To special order, they are also available in Safety class II.

8994

20

2 T 16 54 W

16

0,25

0,8

8

2,1

4

6,0

m

4

8

12

16

20

8997

20

3 T 26 36 W

16

0,3

lx

0,5

12 1,0

8

2,3

4

6,2

m

4

8

12

16

20

8998

20

3 T 26 58 W

16

0,5

lx

0,9

12 1,8

8

420

lx

0,4

12

3,8

4

8,4

m

4

8

12

16

20


Light building elements for fluorescent lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel White plastic cylinder 8994 with electronic ballast Door and connection box 632 Technical data of connection boxes, page 507 Colour graphite or silver graphite – article number silver – article number + A

A A B

B C

D

Lamp

8994 8997 8998

2 T 16 28 · 54 W 8900 3 T 26 36 W 10 050 3 T 26 58 W 15 600

Lumen

A

B

C

D

140 1400 4000 800 170 1600 5000 1000 220 2000 6500 1000

421


BEGA Light building element with single or double-sided light output

Light building elements are luminous design features for public areas. They are especially suitable for delineating and structuring outside areas. They can guide or direct pedestrians and traffic. The awareness level for these luminaires is markedly higher than for pole-top luminaires. Light building elements can harmonize with or even highlight the respective architectural structure. The luminaires are operated with fluorescent lamps T 16 and equipped with electronic ballasts. Lamps with two different light wattages can be used. For bollards whose shape and construction match the luminaires on these double pages, see page 372. All technical data are given in the instructions for use for these luminaires. To special order, they are also available in Safety class II.

8983

8983

8

1 T16 28 W

8

0,2 lx

0

4

4

0

4 2 1 0,5

4

422

2

1

0,5 0,3 lx

8

12

16

20

m

2 1 0,5 0,3 lx

8

12

16

20

m

0

10 4

2

1 0,5 lx

3

6 4

1 T16 54 W

6 3

5

0 3

8 4

8993

8993

1 T16 28 W

6 3

5

4

8 m

1 T16 54 W

6 0

3

6

9

12

m

0

3

6

9

12


single-sided

double-sided

Light building elements for fluorescent lamps with single-sided or double-sided light output Protection class IP 65 Die cast aluminium, aluminium and stainless steel Safety glass with optical texture Reflector of pure anodized aluminium Electronic ballast Door and connection box 632 Luminaires including anchorage unit made of galvanized steel. On request, we supply mounting base 833 for bolting to a foundation without extra charge. Technical data of connection boxes, page 507 Colour graphite or silver graphite – article number silver – article number + A

A

B

C

D

Single-sided light output

Lamp Lumen

8983

1 T 16 28 · 54 W 4450

A

B

C

D

95 x 155 1200 3500 800

Double-sided light output

Lamp Lumen

8993

1 T 16 28 · 54 W 4450

A

B

C

D

95 x 155 1200 3500 800

423


BEGA Light building element for fluorescent lamps

Light building elements are luminous design features for public areas. They are especially suitable for delineating and structuring outside areas. They can guide or direct pedestrians and traffic. The awareness level for these luminaires is markedly higher than for pole-top luminaires. Light building elements can harmonize with or even highlight the respective architectural structure. The luminaires are equipped with electronic ballasts. 55 W or 80 W lamps can be used in these luminaires. All technical data are given in the instructions for use for these luminaires. To special order, they are also available in Safety class II.

8877

8

1 TC-L 80 W 1 TC-L 55 W x 0,8 H = 4,0 m

5 6

10

4

20

2 0 m

1 2

0,2

10

8

2 1

6

4

2

0

8

5

6

15

4

40

2

4

6

0,2

8

lx

10

8878

2 TC-L 80 W 2 TC-L 55 W x 0,8 H = 4,0 m

2 0 m

424

0,2 0,5 2

10

8

2 0,5 0,2 lx

6

4

2

0

2

4

6

8

10


Single and double light building elements for fluorescent lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Safety glass Reflector of pure anodized aluminium Electronic ballast Adjustable slope angle 0° or 10° Door and connection box 629 Luminaires including anchorage unit made of galvanized steel. On request, we supply mounting base 833 for bolting to a foundation without extra charge. Technical data of connection boxes, page 507 Colour graphite or silver graphite – article number silver – article number + A B

B

A

C

D

Single light building element

Lamp Lumen

8877

1 TC-L 55 · 80 W

6000

A

B

C

D

95 x 155 1100 4000 800

Double light building element

Lamp Lumen

8878

2 TC-L 55 · 80 W 12 000

A

B

C

D

95 x 155 2100 4000 800

425


BEGA Light building element for discharge lamps

Light building elements are luminous design features for public areas. They are especially suitable for delineating and structuring outside areas. They can guide or direct pedestrians and traffic. The awareness level for these luminaires is markedly higher than for pole-top luminaires. Light building elements can harmonize with or even highlight the respective architectural structure. Luminaires with broad spread light distribution. The material thickness of the safety glass, which is visible in its entirety, increases the vertical illuminance emitted by the lateral light. For bollards whose shape and construction match the luminaires on this double page, see page 374. All technical data are given in the instructions for use for these luminaires. To special order, they are also available with other electrical equipment in Safety class II.

6

0,5 1 2

4

16

8

8945

1 HIT-CE 150 W

4

2 0 m

0,2 lx

0,2

10

8

6

4

2

0

2

4

6

8

10


The entire material thickness of the partial matt safety glass of the BEGA light building element is visible. The light exiting laterally produces broad spread light distribution and increases vertical illuminance.

Light building element for discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Safety glass Reflector of pure anodized aluminium Door and connection box 632 Luminaires including anchorage unit made of galvanized steel. On request, we supply mounting base 829 for bolting to a foundation without extra charge. Technical data of connection boxes, page 507 Colour graphite or silver graphite – article number silver – article number + A

A

B

B C

A

D

Lamp Lumen

8945

1 HIT-CE 150 W 15 500

A

B

C

D

220 x 220 3250 4500 800

427


BEGA Light building element for fluorescent lamps

Light building elements are luminous design features for public areas. They are especially suitable for delineating and structuring outside areas. They can guide or direct pedestrians and traffic. The awareness level for these luminaires is markedly higher than for pole-top luminaires. Light building elements can harmonize with or even highlight the respective architectural structure. The luminaires on this double page have a square layout and four-sided light output. Luminaire 8966 is operated with fluorescent lamps T 16 and equipped with electronic ballasts. 28 W or 54 W lamps can be used in this luminaire. All technical data are given in the instructions for use for these luminaires. To special order, they are also available in Safety class II. Bollards whose shape and construction match the luminaires on this double page are given on page 372 – wall luminaires on page 160.

8966

20

2 T 16 54 W

16

0,2 0,4

12

6,4

m

4

8

3 T 26 36 W 0,3

12

16

20

lx

0,5 1,1

8

2,0

4

8969

20 16 12

0,8

8

428

lx

2,5

4

7,0

m

4

8

12

16

20


Light building elements for fluorescent lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel White plastic diffuser Door and connection box 632 8966 with electronic ballast Luminaires including anchorage unit made of galvanized steel. On request, we supply mounting base 819 for luminaire 8966 and mounting base 829 for luminaire 8969 for bolting to a foundation without extra charge. Technical data of connection boxes, page 507 Colour graphite or silver graphite – article number silver – article number + A

A

B

C

D

Lamp Lumen

8966 8969

2 T 16 28 · 54 W 8900 3 T 26 36 W 10 050

A

B

C

D

160 x 160  1300 4000 800 220 x 220  1600 5000 800

429


BEGA Light building element

Light building elements are luminous design features for public areas. They are especially suitable for delineating and structuring outside areas. They can guide or direct pedestrians and traffic. The awareness level for these luminaires is markedly higher than for pole-top luminaires. Light building elements can harmonize with or even highlight the respective architectural structure. The light building elements on this double page are unshielded with two or threesided light output. All technical data are given in the instructions for use for these luminaires. To special order, they are also available in Safety class II.

8984

12

1 T 26 58 W

8 4 0

5 2,5 1 0,5

0,2 0,1

lx

4 m

20

16

12

8

4

0

4

8

12

16

20

8985

1 T 26 58 W

8 4 0

5 2,5 1 0,5

0,2 0,1

4 8 m

20

16

12

8

4

0

4

8

12

16

20

lx


Light output 240° two-sided

Light output 360° three-sided

Light building elements for fluorescent lamps with two-sided or three-sided light output Protection class IP 44 Die cast aluminium, aluminium and stainless steel White plastic cylinder Door and connection box 632 Luminaires including anchorage unit made of galvanized steel. On request, we supply mounting base 827 for bolting to a foundation without extra charge. Technical data of connection boxes, page 507 Colour graphite or silver graphite – article number silver – article number + A

A

A

B

C

B

D

Two-sided light output

Lamp Lumen

8984

1 T 26 58 W 5200

A

B

C

D

250 1500 3500 750

Three-sided light output

Lamp Lumen

8985

1 T 26 58 W 5200

A

B

C

D

250 1500 3500 750

431


BEGA Light building element

Light building elements are luminous design features for public areas. They are especially suitable for delineating and structuring outside areas. They can guide or direct pedestrians and traffic. The awareness level for these luminaires is markedly higher than for pole-top luminaires. Light building elements can harmonize with or even highlight the respective architectural structure. The luminaires on this double page have rotationally symmetrical light distribution. Luminaires for indirect and direct light. A reflector system directs the main part of the light precisely upwards onto the top reflector which reflects the light indirectly onto the illuminated surface. These luminaires create a fascinating effect at night. They produce effective, highly uniform light with a high level of visual comfort. All technical data are given in the instructions for use for these luminaires. To special order, they are also available with other electrical equipment and in Safety class II.

8995

10

1 HIE 70 W

8

lx

0,4 0,7

6 2,0

4

5,2

2

11

m

2

4

6

8

10

8996

10

1 HME 80 W

8

0,25

lx

0,5

6 1,5

4

3,6

2

7,7

m

2

4

6

8

10


Light building elements for discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Clear plastic cylinder Reflector of pure anodized aluminium Door and connection box 632 Luminaires including anchorage section are made of galvanized steel. To special order, we supply mounting base 828 for bolting to a foundation without extra charge. Technical data of connection boxes, page 507 Colour graphite or silver graphite – article number silver – article number + A

A D

D B

B

C

A

Lamp

8995 8996

1 HIE 70 W 6400 1 HME 80 W 4000

Lumen

A

B

C

D

230 720 4000 900 230 720 4000 900

433


Unshielded pole-top luminaires Three-ply opal glass, crystal bubble glass or plastic Mounting heights 1700 - 4000 mm

Pole-top luminaires in four different sizes for different light outputs and mounting heights. Luminaires equipped with spheres, made either of hand-blown glass or plastic. In selecting glass or plastic, the advantages and disadvantages of the two materials should be considered. Glass is highly translucent, non-ageing, easy-to-clean and looks more brilliant. Unless wantonly destroyed, its life is unlimited. Plastic is impact-resistant but impact-resistance and translucency deteriorate over the course of time. It becomes soiled easier than glass. For this reason, we recommend glass for areas which are not particularly at risk.

9226.1

10

1 A 60 100 W H = 1,7 m lx 0,1

8

0,2

6

3

m

2

4

6

10

2,8

10

m

2

9886.1

10

8

0,4

6

5,7

m

2

10

2

9129.1+9129.6

10

1 HME 50 W H = 2,0 m lx 0,2

0,4

6

5,5

m

2

4

8

10

9226.6

10

1 A 60 75 W H = 1,7 m

8

lx

0,15

6

2,6

m

2

4

10

9199.1+9199.6

1 HME 80 W H = 3,0 m lx 0,6 1

2 4

2

9

m

2

4

6

8

10

9951.6

20

1 HME 125 W H = 3,5 m lx 0,2

16

0,3

12 8

0,8

2

8

0,6

0,3

4

6

8

4

6

4

6

0,8 1,9

2

1,4

m

8

4

0,3 0,6

10

8

10

1 TC-T 26 W H = 2,0 m lx 0,15

3,8

6

8

9243.1+9243.6

2 4

6

8

4

1,8

2

4

6

0,8

4

0,9

2

1 A 65 150 W H = 2,0 m lx 0,25

8

0,2 0,4

4

1

2

1 TC-D 18 W H = 1,7 m lx 0,1

8 6

0,4

4

9242.1+9242.6

10

6

8

10

1,4

4

4,2

m

4

8

12

16

20


Pole-top luminaires for incandescent lamps, fluorescent lamps and discharge lamps Protection class IP 44 Die cast aluminium and stainless steel Three-ply opal glass, crystal bubble glass or plastic Luminaires for discharge lamps in the materials crystal bubble glass and pearl plastic are equipped with a silver coloured louvred reflector. In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite

550 450

350

1700

2000

3000

3500 - 4000

300

Luminaire poles

Glass Opal glass

Crystal bubble glass Lamp

9226.1 9242.1 9886.1 9243.1 9129.1 9199.1

9226.3 9242.3 9886.3 9243.3 9129.3 9199.3

1 1 1 1 1 1

White

Pearl

Lamp

9226.6 9242.6 9886.6 9243.6 9129.6 9199.6 9951.6

–    – 9886.8 9243.8 9129.8 9199.8 9951.8

1 1 1 1 1 1 1

A 60 TC-D A 65 TC-T HME HME

Lumen

100 18 150 26 50 80

W W W W W W

1340 1200 2160 1800 2000 4000

Sphere Ø Ø Ø Ø Ø Ø

300 300 350 350 350 450

Height

1700 1700 2000 2000 2000 3000

Ø Ø Ø Ø Ø Ø

Top

Pole

Group

Pole

Group

48 48 60 60 60 60

938 938 943 943 943 911

31 31 31 31 31 34

992 992 994 994 994 930

11 11 11 11 11 12

Luminaire poles

Plastic A 60 75 18 TC-D 100 A 60 26 TC-T 50 HME 80 HME HME 80 ·125

Lumen

W W W W W W W

935 1200 1340 1800 2000 4000 6800

Sphere

Height

Ø 300

1700 1700 2000 2000 2000 3000 4000

Ø Ø Ø Ø Ø Ø

300 350 350 350 450 550

Ø Ø Ø Ø Ø Ø Ø

Top

Pole

Group

Pole

Group

48 48 60 60 60 60 76

938 938 943 943 943 911 914

31 31 31 31 31 34 34

992 992 994 994 994 930 733

11 11 11 11 11 12 12

435


Unshielded pole-top luminaires Mounting heights 2000 - 3500 mm

Pole-top luminaires in two sizes for different light outputs and mounting heights. Unshielded luminaires with rotationally symmetrical light distribution. They provide soft, uniformly widespread light for private and public areas. These luminaires are designed to illuminate gardens, parks, car parks and driveways.

Wall luminaires page 166

8130

10

1 A 60 100 W H = 2,0 m lx 0,1

8

0,2

6

2,5

m

2

4

6

10

2

436

2,3

10

m

2

8134

10

0,5

6

0,8 1,6 3,4

2

7,8

2

2

10

10

8135

m

8

8

1 HME 80 W H = 3,0 m lx 0,5

4,6 6

6

8

4

2

4

4

6

1

4

m

8

0,8

2

1 A 65 150 W H = 3,0 m lx 0,3

8

0,2 0,4

4

0,9

2

1 TC-D 18 W H = 2,0 m lx 0,1

8 6

0,4

4

8131

10

4

6

8

10


Pole-top luminaires for incandescent lamps, fluorescent lamps und discharge lamps Protection class IP 44 Die cast aluminium and stainless steel Three-ply opal glass In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite

B A

C

Pole-top luminaires

Lamp

8130 8131 8134 8135

1 1 1 1

A 60 100 TC-D 18 A 65 150 HME 80

Luminaire poles Lumen

W W W W

1340 1200 2160 4000

A

B

300 300 450 450

375 375 580 580

C

330 330 495 495

Height

2000 2000 3500 3500

Ø Ø Ø Ø

Top

Pole

Group

Pole

Group

60 60 76 76

740 740 906 906

32 32 32 32

908 908 732 732

12 12 12 12

437


Unshielded pole-top luminaires Mounting heights 2000 - 3500 mm

Pole-top luminaires in three sizes for different light outputs and mounting heights. Luminaires with spheres made of hand-blown glass or plastic. Unshielded luminaires with rotationally symmetrical light distribution. They provide soft, uniformly widespread light for private and public areas. These luminaires are designed to illuminate parks, forecourts and traffic calmed zones. Wall luminaires page 164

9150

10

1 A 60 100 W H = 2,0 m lx 0,1

8

0,2

6

2,6

m

2

4

6

10

m

2

9250

10

m

2

4

6

8

0,8 1,6 3,4

10

m

2

9259

10

1,2 2,2 4,2

2

9,8

2

2

10

10

9259

m

8

8

1 HME 125 W H = 3,0 m lx 0,8

4

6

6

8

6,0 4

4

6

1,3

10

9350

7,8

2,6

8

1 HME 80 W H = 3,0 m lx 0,5

2

0,7

6 4

6

6

1 HME 80 W H = 3,0 m lx 0,5

8

4

8

4

2 4,6

10

438

10

1

2

2

2,3

0,5

6 4

m

8

0,9

2

1 A 65 150 W H = 3,0 m lx 0,3

8

0,2 0,4

4

1

2

1 TC-D 18 W H = 2,0 m lx 0,1

8 6

0,4

4

9153

10

4

6

8

10


Pole-top luminaires for incandescent lamps, fluorescent lamps and discharge lamps Protection class IP 44 Die cast aluminium and stainless steel Three-ply opal glass or white plastic In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite

B A

C

Luminaire poles

Opal glass

Lamp

Lumen

9150 9153

1 A 60 100 W 1 TC-D 18 W

1340 1200

A

B

C

300 350 490 300 350 490

Height

Top

Pole

Group

Pole

Group

2000 2000

Ø 60 Ø 60

740 740

32 32

907 907

12 12

Luminaire poles

White plastic

Lamp

Lumen

9250 9350 9259

1 A 65 150 W 2160 80 W 4000 1 HME 1 HME 80 ·125 W 6800

A

B

C

400 450 590 400 450 590 500 550 720

Height

Top

Pole

Group

Pole

Group

3000 3000 3500

Ø 60 Ø 60 Ø 76

911 911 913

34 34 34

986 986 789

14 14 14

439


Luminaires with symmetrical or asymmetrical light distribution Mounting heights 3000 - 5000 mm

A group of spherical luminaires shielded to the top and designed to light squares, driveways and urban streets. Pole-top luminaires with rotationally symmetrical light distribution to illuminate the surface below the luminaires uniformly, and matching side-mounted pole-top luminaires with asymmetrical reflectors to illuminate surfaces in front of the luminaires. Side-mounted pole-top luminaires in this series can also be mounted at a pole in double or triple configuration. When ordering the luminaires, please state the luminaire configuration. The poles will then be supplied ready for installation and fitted with the required holes. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

9844

10

m

2

4

2,5

4

4 11

1,2

6

1,8

2

1 HME 125 W H = 3,0 m lx 0,8

8

0,9

6 4

9844

10

1 HME 80 W H = 3,0 m lx 0,5

8

6

8

10

5,5

2

15

m

2

4

6

8

10

9897

8

1 HME 80 W H = 4,0 m

6 4 2

16

8

2

4

1

0,5

lx

0,2

0 m

0

2

4

6

10

8

12

14

16

18

20

9997

8

1 HME 80 W H = 5,0 m

6 4 2

16

8

4

2

8

10

12

1

0,2 lx

0,5

0 m

0

2

4

6

14

16

18

20

9997

8

1 HME 125 W H = 5,0 m

6 4 2

32

16

8

2

4

1

0,5 0,3 lx

0 m

440

0

2

4

6

8

10

12

14

16

18

20


Pole-top luminaires with symmetrical light distribution and side-mounted pole-top luminaires with asymmetrical light distribution for discharge lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel White plastic diffuser or clear plastic diffuser with optical texture Reflector of pure anodized aluminium 9897 · 9997 Slope angle 0°-12° adjustable In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

A

B

Pole-top luminaires · symmetrical

Lamp

Lumen

9844

1 HME 80 ·125 W 6800

Luminaire poles A

B

500 470

Height

Top

Pole

Group

3000 Ø 82

909

32

A

B

Side-mounted pole-top luminaires · asymmetrical

Lamp

Lumen

9897 9997

1 HME 80 W 4000 1 HME 80 ·125 W 6800

A

B

420 350 610 500

Luminaire poles Height

Top

Pole

Group

3500 - 4000 Ø 76 913 · 914 34 4000 - 5000 Ø 76 914 · 915 34

441


Unshielded pole-top luminaires Mounting heights 2000 - 4000 mm

Pole-top luminaires with rotationally symmetrical light distribution. They are available in diverse sizes, light outputs and sphere material. These luminaires are designed to illuminate driveways, forecourts and all areas requiring distinctive and expressive lighting.

Opal glass White plastic

–.1 –.6 9101.1

10

1 A 60 100 W H = 3,0 m lx 0,2

8

0,3

6

3,4

m

2

4

6

10

10

m

2

9504.1

10

8

m

2

4

6

8

10

9754.1

10

4 A 60 75 W H = 2,0 m lx 0,4

8

0,7

6

9,0

m

2

4

8

10

9204.1

20

4 HME 50 W H = 3,0 m 0,2 lx 0,3

12

0,5 0,9 1,8

2

4,0

m

2

4

4,8

m

4

8

12

0,2 1,1

4

3,6

m

4

8

12

4 m

16

20

1,0 1,8 4,4

2

11

m

2

12

0,4 0,9

4

6,0

4

4

20

10

2,0

m

16

8

9205.1

8

12

6

5 HME 50 W H = 3,0 m 0,25 lx

4,0 8

4

20

0,25

1,3

20

5 A 60 75 W H = 2,0 m lx 0,5

8

16

16

9894.1

10

5 A 60 100 W H = 3,0 m 0,15 lx

0,5

8

12

6

9202.1

20 16

10

4 A 60 100 W H = 3,0 m 0,1 lx

4

1,5

4

8

9201.1

20 16

0,6 8

6

0,4

6

16

10

9513.1

8

3,2

2

8

1 HME 50 W H = 4,0 m lx 0,2

12

1,5

4

6

8

4

1,9 4,9

4

6

0,9

2

2,0 4,5

0,4

6 4

0,6 1,0

2

1 HME 50 W H = 3,0 m lx 0,3

8

1 A 65 150 W H = 4,0 m lx 0,3

8

4

1,3

2

9518.1

10

6

0,6

4

Crystal bubble glass –.3 Pearl plastic –.8

8

12

16

20


Pole-top luminaires for incandescent lamps and discharge lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel · Three-ply opal glass The spheres are also available in other types of glass and plastic. Please change the fifth digit of the article number when ordering. –.6 white plastic, –.3 crystal bubble glass, –.8 pearl plastic 9754 · 9894 only available in –.1, –.3, –.6. The luminaires for discharge lamps in the materials crystal bubble glass and pearl plastic are equipped with a silver coloured louvred reflector. In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite C

C

B

B

A

A

Single pole-top luminaires · Opal glass

Lamp

Lumen

Luminaire poles

A

B

C

Height

Top

Pole

Group

9101.1 1 A 60 100 W 9518.1 1 A 65 150 W

1340 2160

350 945 585 450 1080 750

3000 - 4000 Ø 60 3000 - 4000 Ø 76

911 · 724 34 918 · 914 34

9504.1 1 HME 50 W 9513.1 1 HME 50 W

2000 2000

350 945 585 450 1080 750

3000 - 4000 Ø 60 3000 - 4000 Ø 76

911 · 724 34 918 · 914 34

Double pole-top luminaires · Opal glass

Lamp

Lumen

A

Luminaire poles B

C

Height

Top

Pole

Group

9318.1 2 A 60 100 W 9103.1 2 A 65 150 W

2680 4320

350 960 1240 450 1080 1440

3000 - 4000 Ø 60 3000 - 4000 Ø 76

911 · 724 34 918 · 914 34

9319.1 2 HME 50 W 9108.1 2 HME 50 W

4000 4000

350 960 1240 450 1080 1440

3000 - 4000 Ø 60 3000 - 4000 Ø 76

911 · 724 34 918 · 914 34

C A B B

Quadruple pole-top luminaires · Opal glass

Lamp

Lumen

A

Luminaire poles B

C

Height

Top

Pole

Group

9754.1 4 A 60 75 W 9201.1 4 A 60 100 W

3740 5360

250 570 350 725

680 985

2000 - 2500 Ø 60 740 · 741 32 3000 - 3500 Ø 100 958 · 959 31

9204.1 4 HME 50 W

8000

350 725

985

3000 - 3500 Ø 100

Quintuple pole-top luminaires · Opal glass

Lamp

Lumen

9894.1 5 A 60 75 W 9202.1 5 A 60 100 W

A

958 · 959 31

Luminaire poles B

C

Height

Top

Pole

Group

4675 6700

250 765 680 350 1080 985

2000 - 2500 Ø 60 740 · 741 32 3000 - 3500 Ø 100 958 · 959 31

9205.1 5 HME 50 W 10 000

350 1080 985

3000 - 3500 Ø 100

958 · 959 31

443


Pole-top luminaires with asymmetrical light distribution Mounting heights 3500 - 6000 mm

Luminaires with asymmetrical light distribution, available in diverse sizes and light outputs to illuminate squares, driveways and urban streets. The optical system allows the luminaires to be rotated infinitely around the vertical axis 360°, and therefore the light distribution to be precisely adjusted onto the illuminated surface. These pole-top luminaires are ready for installation in single or double configuration. Luminaires of this type can be supplied in triple configuration too. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

Wall luminaires page 234

8 6 4 2 16

0 m

0

2

8

4

6

2

4

8

1

10

0,5

12

14

0,3

16

0,2

18

lx

20

8 6 4 2 32

0 m

0

2

16

4

8

2

4

6

8

10

16

8

4

6

8

10

12

1

14

16

lx

0,5

18

20

8 6 4 2 32

0 m

0

2

4

2

1

12

14

lx

0,5

16

18

20

8 6 4 2 32

0 m

444

0

2

4

16

6

8

8

10

2

4

12

14

16

lx

1

18

20


asymmetrical

Single and double pole-top luminaires with asymmetrical light distribution for discharge lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel Plastic diffuser with optical texture Reflector of pure anodized aluminium In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite

C

C

B

A

Single pole-top luminaires

Luminaire poles

Lamp

Lumen

A

B

C

9858 8841 8841

1 HME 80 W 1 HSE-E 50 ·70 W 1 HIE-CE/S 70 W

4000 5600 5900

500 1100 770 500 1100 770 500 1100 770

3500 - 4000 Ø 76 913 · 914 3500 - 4000 Ø 76 913 · 914 3500 - 4000 Ø 76 913 · 914

9962 8921 8921

1 HME 80 ·125 W 6800 1 HIE-CE/S 100 W 8300 1 HSE-MF 100 W 10 200

675 1250 960 675 1250 960 675 1250 960

4500 - 6000 Ø 76 725 · 915 · 916 34 928 · 926 15 4500 - 6000 Ø 76 725 · 915 · 916 34 928 · 926 15 4500 - 6000 Ø 76 725 · 915 · 916 34 928 · 926 15

Double pole-top luminaires

Height

Top

Pole

Group

Pole

Group

34 927 · 928 15 34 927 · 928 15 34 927 · 928 15

Luminaire poles

Lamp

Lumen

A

B

C

Height

9957 8842 8842

2 HME 80 W 8000 2 HSE-E 50 ·70 W 11 200 2 HIE-CE/S 70 W 11 800

500 1150 1470 500 1150 1470 500 1150 1470

3500 - 4000 Ø 76 913 · 914 3500 - 4000 Ø 76 913 · 914 3500 - 4000 Ø 76 913 · 914

Top

Pole

Group

Pole

Group

9973 8922 8922

2 HME 80 ·125 W 13 600 2 HIE-CE/S 100 W 16 600 2 HSE-MF 100 W 20 400

675 1280 1850 675 1280 1850 675 1280 1850

4500 - 6000 Ø 76 725 · 915 · 916 34 928 · 926 15 4500 - 6000 Ø 76 725 · 915 · 916 34 928 · 926 15 4500 - 6000 Ø 76 725 · 915 · 916 34 928 · 926 15

34 927 · 928 15 34 927 · 928 15 34 927 · 928 15

445


Pole-top luminaires with symmetrical or asymmetrical light distribution Mounting heights 4000 - 6000 mm

Luminaires with symmetrical or asymmetrical light distribution, designed to illuminate squares, pedestrian zones and urban streets. The optical system allows the luminaires to be rotated infinitely around the vertical axis 360°, and therefore the light distribution to be precisely adjusted onto the illuminated surface. Pole-top luminaires ready for installation in single or double configuration. Luminaires of this type can be supplied in triple configuration too. Luminaires 9587 · 9588 are available on request with a white plastic diffuser. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

9587

10

1 HME 125 W H = 5,0 m lx 1,5

8

1,7

6

9587

10

1 HME 80 W H = 5,0 m lx 0,9

8

2,8

6

3,5 4

5,7 4

7

2

14

m

2

4

6

8

10

12

2

23

m

2

4

6

8

10

8775

8

1 HME 125 W 1 HME 80 W x 0,62 H = 5,0 m

6 4 2 16

0 m

0

2

4

8

6

4

8

10

9588

10

14

29

m

2

4

20

9588

5,8

6 12 4

14

2

18

lx

2 HME 125 W H = 5,0 m lx 3,0

7 4

0,5

16

8

3,6

6

12

1

10

2 HME 80 W H = 5,0 m lx 1,8

8

2

6

8

10

23

2

47

m

2

4

6

8

10

8776

8

2 HME 125 W 2 HME 80 W x 0,62 H = 5,0 m

6 4 2 32

0 m

0

2

4

16

6

8

8

10

4

12

2

14

1

16

18

lx

20


symmetrical

asymmetrical

Single and double pole-top luminaires for discharge lamps with symmetrical or asymmetrical light distribution Protection class IP 44 Die cast aluminium, aluminium and stainless steel 9587 · 9588 Three-ply opal glass 8775 · 8776 Pearl plastic Reflector of pure anodized aluminium White plastic diffusers can be supplied instead of three-ply opal glass but the luminaires can then only be operated at minimum wattage. In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite

C

C

B

A

Single pole-top luminaires

Lamp

9587 8775

1 HME 80 ·125 W 1 HME 80 ·125 W

Luminaire poles

Lumen

6800 symmetrical 6800 asymmetrical

A

B

C

550 1250 900 550 1250 900

Double pole-top luminaires Lumen

Height

Top

Pole

Group

Pole

Group

4000 - 6000 Ø 76 914 · 915 · 916 34 927 · 928 · 926 15 4000 - 6000 Ø 76 914 · 915 · 916 34 927 · 928 · 926 15 Luminaire poles

Lamp

9588 8776

2 HME 80 ·125 W 13 600 symmetrical 2 HME 80 ·125 W 13 600 asymmetrical

A

B

C

550 1300 1720 550 1300 1720

Height

Top

Pole

Group

Pole

Group

4000 - 6000 Ø 76 914 · 915 · 916 34 927 · 928 · 926 15 4000 - 6000 Ø 76 914 · 915 · 916 34 927 · 928 · 926 15

447


Pole-top luminaires with symmetrical light distribution Mounting heights 3500 - 6000 mm

Luminaires with symmetrical light distribution in diverse sizes and light outputs to illuminate squares, driveways and traffic calmed zones. Pole-top luminaires with three-ply opal glass and top reflector. White plastic diffusers can be supplied instead of three-ply opal glass but the luminaires can then only be operated at minimum wattage. Pole-top luminaires ready for installation in single or double configuration. Luminaires of this type can be supplied in triple configuration too. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

Wall luminaires page 182

9755

10

1 HME 50 W H = 4,0 m lx 0,5

8

0,9

6

10

m

2

4

6

1,5

6

11

m

2

4

6

8

10

9757

10

2 HME 50 W H = 4,0 m lx 0,8

8

1,8

6

19

m

2

4

6

8

10

9772

10

2 HME 80 W H = 5,0 m lx 1,6

8

3,0

6

2,4 4,8 9,8

2

19

m

2

4

6

8

10

9757

10

2 HME 80 W H = 4,0 m lx 1,6

8

3,6 7,5 17

2

38

m

2

4

6

8

10

9772

10

2 HME 125 W H = 5,0 m lx 2,6

8

4,8 9,7 20

2

38

2

2

10

10

9756

m

8

8

1 HME 125 W H = 5,0 m lx 1,3

8

23 6

6

10

4

12

4

4

6

6,0

4

2

4

8,5

2

m

6

3,8

4

20

4

6,0

2

8,4

2

6

2,9

4

2

10

1 HME 80 W H = 5,0 m lx 0,8

8

m

8

9756

10

1,8 3,7

4

4,2

2

1 HME 80 W H = 4,0 m lx 0,9

8 6

1,8

4

9755

10

4

6

8

10


symmetrical

Single and double pole-top luminaires with symmetrical light distribution for discharge lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel Three-ply opal glass In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite

C

C

B

A

Luminaire poles

Single pole-top luminaires

Lamp

Lumen

9755 9756

1 HME 50 · 80 W 1 HME 80 ·125 W

4000 6800

A

B

C

450 1100 745 600 1250 920

Double pole-top luminaires

Lamp

Lumen

9757 9772

2 HME 50 · 80 W 8000 2 HME 80 ·125 W 13 600

Height

Top

Pole

Group

Pole

Group

3500 - 4000 Ø 76 913 · 914 34 927 · 928 15 4500 - 6000 Ø 76 725 · 915 · 916 34 928 · 926 15 Luminaire poles

A

B

C

450 1150 1410 600 1300 1770

Height

Top

Pole

Group

Pole

Group

3500 - 4000 Ø 76 913 · 914 34 927 · 928 15 4500 - 6000 Ø 76 725 · 915 · 916 34 928 · 926 15

449


Pole-top luminaires with rotationally symmetrical light distribution Mounting heights 2500 - 5000 mm

Luminaires with symmetrical light distribution. They are designed to illuminate parks, pedestrian areas and traffic calmed zones. Luminaires 9954 and 9991 have an additional upper light output. The part of the light which is not directed downwards through the louvred reflectors and top reflector exits through prisms via the upper light output. The top reflector is illuminated from the top and the immediate surroundings e.g. the tops of adjacent trees are illuminated as well. This makes the shape of the luminaire visible even at night. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

9919

10

1 HME 80 W H = 2,5 m lx 0,5

8

1,1

6

23

m

2

4

6

0,9

6

450

14

m

2

2

2

m

8

10

1 HME 125 W H = 4,0 m lx 1,0

8

2,0

6

8

10

9954

1 HME 125 W H = 4,5 m lx 0,6

8

4,7 6

6

10

1,3

4,2 10

2

23

m

2

1,2 2,5 4,8

2

6,6

2

2

10

10

9991

m

8

8

1 HSE-E 70 W H = 4,5 m lx 0,5

8

8 6

6

10

4

5,8

4

4

6

3,0

4

3,4

4

4

9914

10

4

6

2

6

1,8

4 2

10

1 HME 80 W H = 4,5 m lx 0,4

8

m

8

9954

10

1,2 2,5

4

6,8

2

1 HME 80 W H = 4,0 m lx 0,6

8 6

2,4

4

9914

10

4

6

8

10


symmetrical

Pole-top luminaires with symmetrical light distribution shielded or with additional upper light output for discharge lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel Three-ply opal glass 9954 · 9991 Inside white louvred reflectors Crystal glass with optical texture In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite

A

B

Pole-top luminaires

Luminaire poles

Lamp

Lumen

9919 9914

1 HME 50 · 80 W 4000 1 HME 80 ·125 W 6800

A

B

450 675 600 920

Height

Top

Pole

Group

2500 - 3000 Ø 60 910 · 911 34 3500 - 4000 Ø 76 913 · 914 34

A

B

Pole-top luminaires · with additional light output

Lamp

Lumen

9954 9991 9991

1 HME 80 ·125 W 6800 70 W 5600 1 HSE-E 1 HIE-CE/S 70 W 5900

A

Luminaire poles B

550 570 550 570 550 570

Height

Top

Pole

Group

3500 - 5000 Ø 76 913 · 914 · 915 34 3500 - 5000 Ø 76 913 · 914 · 915 34 3500 - 5000 Ø 76 913 · 914 · 915 34

451


Pole-top luminaires with symmetrical or asymmetrical light distribution Mounting heights 4000 - 5000 mm

Luminaires with symmetrical or asymmetrical light distribution to illuminate squares, pedestrian zones and urban streets. Their optical system allows these luminaires to be rotated infinitely around the vertical axis 360°, and therefore the light distribution to be adjusted precisely onto the illuminated surface. Pole-top luminaires ready for installation in single or double configuration. Luminaires of this type can be supplied in triple configuration too. Luminaires 8721 · 8722 are available on request with a white plastic diffuser. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

Wall luminaires page 178

8721

10

m

2

4

3,3

4

3,7 8,0

1,6

6

1,6

2

1 HME 80 W H = 5,0 m lx 0,8

8

0,8

6 4

8721

10

1 HME 50 W H = 5,0 m lx 0,4

8

6

8

10

7,5

2

16

m

2

4

6

8

10

8791

8

1 HME 80 W 1 HME 50 W x 0,5 H = 5,0 m

6 4 2 12

0 m

0

2

4

5

6

8

2

10

8722

10 8 6

16

1

12

18

m

2

4

12

14

0,2

16

lx

18

20

8722

2 HME 80 W H = 5,0 m lx 0,15 0,3 0,7

8

7

2

0,5

20

2 HME 50 W H = 4,0 m lx 0,6 2,6

4

1

6

8

10

2,2

4

9,8

m

4

8

12

16

20

8792

8

2 HME 80 W 2 HME 50 W x 0,5 H = 5,0 m

6 4 2 36 20 12

0 m

0

2

4

6

8

5

10

2

12

1

0,5

0,3

14

16

18

lx

20


symmetrical

asymmetrical

Single and double pole-top luminaires with symmetrical or asymmetrical light distribution for discharge lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel 8721 · 8722 Symmetrical light distribution · Opal glass White plastic diffusers can be supplied instead of three-ply opal glass but the luminaires can then only be operated at minimum wattage. 8791 · 8792 Asymmetrical light distribution · Clear pearl plastic Reflector of pure anodized aluminium In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

C

C

B

A

Single pole-top luminaires Lumen

Luminaire poles

Lamp

A

B

C

8721 8791

1 HME 50 · 80 W 4000 symmetrical 400 800 670 1 HME 50 · 80 W 4000 asymmetrisch 460 825 700

Double pole-top luminaires Lumen

Height

Top

Pole

Group

Pole

Group

4000 - 5000 Ø 76 914 · 915 34 791 · 794 14 4000 - 5000 Ø 76 914 · 915 34 791 · 794 14 Luminaire poles

Lamp

A

B

C

8722 8792

2 HME 50 · 80 W 8000 symmetrical 400 800 1340 2 HME 50 · 80 W 8000 asymmetrisch 460 825 1400

Height

Top

Pole

Group

Pole

Group

4000 - 5000 Ø 76 914 · 915 34 791 · 794 14 4000 - 5000 Ø 76 914 · 915 34 791 · 794 14

453


Pole-top luminaires with rotationally symmetrical light distribution Mounting heights 3000 - 5000 mm

Pole-top luminaires in two sizes for different light outputs and mounting heights. Luminaires with rotationally symmetrical light distribution to illuminate squares, driveways and traffic calmed zones. They are equipped with a white light-diffusing plastic cover or with a clear cover and inside glass diffuser. The diffuser suppresses the glare from the lamp and at the same time directs it under the inside of the top surface. Luminaires with both wide beam direct light and soft indirect light. These luminaires provide very uniform light and a high level of visual comfort. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 · 32 W lamps can be used in these luminaires. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8077

10

1 TC-TEL 32 W 1 TC-TEL 26 W x 0,75 H = 4,0 m lx 0,4 0,7

8 6

1,5

4 7,2

m

2

6

10

1,8

4

454

8

1 TC-TEL 32 W 1 TC-TEL 26 W x 0,75 H = 4,0 m lx 0,5 10

8

2

6

8079

10

m

4

6

2,4

12,2

m

2

6

2

2

8

10

8

10

1 HME 80 W 1 HME 50 W x 0,5 H = 4,0 m lx 0,9 1,6

8

m

6

8080

10

8,0 6

4

3,0

1 HME 80 W H = 4,5 m lx 0,8

8

1,4

6

12

m

2

2

10

10

8093

1,7

6

2

8

1 HME 80 W H = 4,5 m lx 1,0

8

m

8

6

10

13,5 6

4

1 HME 125 W H = 4,5 m lx 1,3

8

2,2 4,0

4

5,3

2

8092

10

6

2,5

8,5

2

19,5

m

2

2,7 5,2 10,5

2

20

2

2

10

10

8093

m

8

8

1 HME 125 W H = 4,5 m lx 1,6

8

12 6

6

10

4

6,5

4

4

6

3,2

4

6,1

4

8092

10

4

5,2

2

4

3,6

4

1 HME 80 W 1 HME 50 W x 0,5 H = 4,0 m lx 0,7 1,2

8

4

3,3

2

8078

10

4

6

8

10


Pole-top luminaires for fluorescent lamps and discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel White plastic cover or clear plastic cover and inside glass diffuser 8077 · 8079 with electronic ballast In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite

A

A

B

B

Pole-top luminaires · white plastic cover

Lamp

Lumen

8077 8078 8092

1 TC-TEL 32 W 2400 1 HME 50 · 80 W 4000 1 HME 80 ·125 W 6800 A

Luminaire poles A

B

750 515 750 515 1000 660

Height

Top

Pole

Group

Pole

Group

3000 - 4000 Ø 60 911 · 724 34 986 · 787 14 3000 - 4000 Ø 60 911 · 724 34 986 · 787 14 4000 - 5000 Ø 76 914 · 915 34 791 · 794 14

A

B

B

Pole-top luminaires · clear plastic cover

Lamp

Lumen

8079 8080 8093

1 TC-TEL 32 W 2400 1 HME 50 · 80 W 4000 1 HME 80 ·125 W 6800

Luminaire poles A

B

750 515 750 515 1000 660

Height

Top

Pole

Group

Pole

Group

3000 - 4000 Ø 60 911 · 724 34 986 · 787 14 3000 - 4000 Ø 60 911 · 724 34 986 · 787 14 4000 - 5000 Ø 76 914 · 915 34 791 · 794 14

455


Pole-top luminaires with rotationally symmetrical light distribution Mounting heights 1000 - 6000 mm

Luminaires with rotationally symmetrical light distribution, available in diverse sizes and light outputs. Luminaires with mounting heights 1000 to 2000 mm to illuminate gardens and parks in private and public areas. The luminaires with mounting heights 3000 - 6000 mm are suitable for the illumination of squares, pedestrian zones and urban streets. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

9846

5

1 T 32-R 40 W H = 1,0 m lx 0,4

4

0,8

3

9846

5

1 T 32-R 40 W H = 2,0 m lx 1

4

2

3

2 2

4 2

6

1

24

m

1

2

3

4

5

9016

20

3 HME 80 W H = 4,0 m 0,1 lx

16

0,3

12

10

1

27

m

1

2

4 m

456

5

3 HME 125 W H = 4,0 m lx 0,4 0,7

12 1,7 8

2,1

4,5

10

4

15

4

m

4

8

4

9116

20 16

0,7 8

3

12

16

20

8

12

16

20


Pole-top luminaires for fluorescent lamps and discharge lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel 9846 Top made of glass-fibre reinforced plastic White plastic diffuser In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite

A B

Pole-top luminaires

Luminaire poles

Lamp

Lumen

9846 9016 9116

1 T 32-R 40 W 2800 3 HME 50 · 80 W 12 000 3 HME 125 W 20 400

A

B

450 150 600 250 700 280

Height

Top

1000 - 2000 Ø 60 3000 - 4000 Ø 60 5000 - 6000 Ø 76

Pole

Group

997 · 994 11 911 · 724 34 915 · 916 34

Pole

Group

941 · 943 31 881 · 883 72 886 · 834 72

457


Pole-top luminaires with rotationally symmetrical light distribution Mounting heights 2500 - 4000 mm

Luminaires with rotationally symmetrical light distribution. They are designed to illuminate car parks, pedestrian zones, urban streets and driveways. Equipped with a white light-diffusing plastic cover, they provide soft and uniform light distribution. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8132

10

2 TC-L 24 W H = 4,0 m lx 0,8

8

1,4

6

8

m

2

4

6

0,5

6

458

11

m

2

2

2

m

6

8

10

1 HME 125 W H = 4,0 m

8

1,7

8

10

9048

0,9

18

m

2

6

2

2

m

8

10

10

1 HME 125 W H = 4,0 m lx 1

8

14

8

9168

10

2

3,2 5,6 10

2

18

m

2

4 8 18

2

45

2

2

10

10

9148

m

8

8

3 HME 80 W H = 4,0 m lx 2

8

23 6

6

10

4

9

4

4

6

4

4

6

4

2 HME 80 W H = 4,0 m lx 2

8

4

9,5

2

9441

10

6

5,2

6

1,8 4,6

lx

3

6

1 HME 80 W H = 3,0 m lx 0,5

4

9468

10

4

6

8

7 4

4

10

4

2,3

lx

5,9

2

6

0,9

4 2

10

1 HME 50 W H = 3,0 m lx 0,3

8

m

8

9048

10

1,1 1,9 3,2

4

4,8

2

1 HME 80 W H = 4,0 m

8 6

2,5

4

9468

10

4

6

8

10


Pole-top luminaires for fluorescent lamps and discharge lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel Top made of glass-fibre reinforced plastic White plastic cover In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite

A B

Pole-top luminaires

Lamp Lumen

9048 9168 9148

1 HME 50 · 80 W 4000 1 HME 125 W 6800 3 HME 80 W 12 000

Luminaire poles A

B

500 270 600 320 600 320

Height

Top

2500 - 3000 Ø 60 3000 - 4000 Ø 60 3000 - 4000 Ø 60

Pole

Group

Pole

Group

910 · 911 34 911 · 724 34 911 · 724 34

985 · 986 14 986 · 787 14 986 · 787 14

Pole

Pole

A

B

Pole-top luminaires

Lamp Lumen

8132 9468 9441

2 TC-L 24 W 3600 1 HME 80 ·125 W 6800 2 HME 80 W 8000

Luminaire poles A

B

600 520 600 520 600 520

Height

Top

3000 - 4000 Ø 60 3000 - 4000 Ø 60 3000 - 4000 Ø 60

Group

911 · 724 34 911 · 724 34 911 · 724 34

Group

986 · 787 14 986 · 787 14 986 · 787 14

459


Pole-top luminaires with rotationally symmetrical light distribution for direct and indirect light Mounting heights 3000 - 4500 mm

Pole-top luminaires in two sizes for diverse light outputs and mounting heights. Luminaires with rotationally symmetrical light distribution to illuminate squares, driveways and traffic calmed zones. An inside glass diffuser suppresses glare from the lamp and at the same time directs it under the inside top surface. These luminaires produce both direct wide beam light and indirect soft light. The light is very uniform with a high level of visual comfort. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 · 32 W lamps can be used in these luminaires. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8098

10

1 TC-TEL 32 W 1 TC-TEL 26 W x 0,75 H = 3,5 m lx 0,5 0,9

8 6

1,8

4 8,6

m

2

4

6

1,4

6

460

0,7

6 1,4 3,1

2

7,5

m

2

2,3 4,2 9,0

2

19,5

2

2

10

10

8199

m

8

8

1 HME 125 W H = 4,5 m lx 1,3

8

12 6

6

10

4

5,5

4

4

6

2,6

4 2

10

1 HME 80 W H = 4,5 m lx 0,8

8

m

8

8199

10

1 HME 50 W H = 3,5 m lx 0,4

8

4

3,8

2

8099

10

4

6

8

10


Pole-top luminaires for fluorescent lamps and discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Clear plastic cover Inside matt glass to suppress glare from the lamp 8098 with electronic ballast In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

A B

Pole-top luminaires

Lamp Lumen

8098 8099 8199

1 TC-TEL 32 W 2400 1 HME 50 W 2000 1 HME 80 ·125 W 6800

Luminaire poles A

B

550 370 550 370 710 480

Height

Top

3000 - 3500 Ø 60 3000 - 3500 Ø 60 3500 - 4500 Ø 76

Pole

Group

911 · 912 34 911 · 912 34 913 · 725 34

Pole

Group

986 · 786 14 986 · 786 14 789 · 792 14

461


Pole-top luminaires with rotationally symmetrical light distribution Mounting heights 3500 - 6000 mm

Pole-top luminaires in two sizes for diverse light outputs and mounting heights to illuminate squares, parks, driveways and traffic calmed zones. Luminaires with rotationally symmetrical light distribution. Part of the light emerges above the top surface and also illuminates the surroundings e.g. treetops. An inside glass diffuser suppresses glare from the lamp and spreads the light softly and uniformly. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. Luminaires for a maximum wattage of 42 W can also be operated at 32 W, and luminaires for a maximum wattage of 85 W can be operated at 60 W. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8186

10

1 TC-TEL 42 W 1 TC-TEL 32 W x 0,75 H = 4,0 m lx 0,7 1,1

8 6

2 m

462

12 8

3,5 6,0

4

2

m

4

1 TC-TEL 85 W 1 TC-TEL 60 W x 0,67 H = 6,0 m 0,2 lx 0,35

8187

10

1 HME 80 W 1 HME 50 W x 0,5 H = 4,0 m lx 0,8 1,4

8 6

0,7

1,9

4

8239

20 16

6

8

10

3,4

2

4

m

8

12

16

20

1 HME 125 W H = 6,0 m 0,25 lx 0,5

12 0,9

2,5

4

1,4

8238

20 16

8

4,4

1,8

7,7

4

4,2

2

m

4

4

6

8

10

8

12

16

20


Pole-top luminaires for fluorescent lamps and discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Clear plastic cylinder and inside three-ply opal glass 8186 · 8239 with electronic ballast In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

A

B

Pole-top luminaires

Luminaire poles

Lamp Lumen

8186 8239

1 TC-TEL 1 TC-TEL

8187 8238

1 HME 1 HME

A

B

Height

Top

Pole

Groupe

Pole

Groupe

42 W 3200 85 W 6000

650 720 800 890

3500 - 4000 Ø 76 4000 - 6000 Ø 76

913 · 914 34 914 · 915 · 916 34

906 · 742 32 737 · 748 32

50 · 80 W 4000 125 W 6800

650 720 800 890

3500 - 4000 Ø 76 4000 - 6000 Ø 76

34 913 · 914 914 · 915 · 916 34

906 · 742 32 737 · 748 32

463


Pole-top luminaires with rotationally symmetrical light distribution Mounting heights 3500 - 6000 mm

Pole-top luminaires in two sizes for diverse light outputs and mounting heights to illuminate squares, parks, driveways und traffic calmed zones. Luminaires with rotationally symmetrical light distribution, equipped either with a white light-diffusing plastic cover for soft, pleasantly uniform light or with a clear plastic cover and inside louvred reflector for brilliant directed light. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. Luminaires for a maximum wattage of 42 W can also be operated at 32 W, and luminaires for a maximum wattage of 85 W can be operated at 60 W. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8120

10

1 TC-TEL 42 W 1 TC-TEL 32 W x 0,75 H = 4,0 m lx 0,8 1,3

8 6

6,6

m

2

6

10

1 HME 80 W 1 HME 50 W x 0,5 H = 4,0 m lx 1,0 1,7

8 6

3,3

m

4

8

12

16

20

8333

20

1 TC-TEL 85 W 1 TC-TEL 60 W x 0 67 H = 6,0 m 0,15 lx 0,35

16 12

8,5

m

2

4

5,9

4

2

m

6

6

8

10

4,5

2

4

m

8

12

16

20

8

10

1 HME 80 W 1 HME 50 W x 0,5 H = 4,0 m lx 0,8 1,4

8

0,5

12 1,9

4

4,1

m

4

12

16

20

8233

20

1 HME 125 W H = 6,0 m 0,2 lx

16

0,4

12 8

5,2

2,3

7,4

4

5,0

2

m

4

4

8

0,9

2,7

4

2,0

6

8129

10

1 HME 125 W H = 6,0 m 0,25 lx

8

5,2

2

8219

20 16

0,9

2,9

4

1,5

4

8

4,4

4

8122

10

0,8

2,2

4

464

8

1 TC-TEL 42 W 1 TC-TEL 32 W x 0,75 H = 4,0 m lx 0,6 1,1

8

2

6

8128

10

m

4

12 8

4,0

2

1 TC-TEL 85 W 1 TC-TEL 60 W x 0 67 H = 6,0 m 0,2 lx 0,4 0,7

2,3

4

8223

20 16

6

8

10

8

12

16

20


Pole-top luminaires for fluorescent lamps and discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Clear plastic cylinder with white louvred reflector or white plastic cylinder 8128 · 8333 · 8120 · 8223 with electronic ballast In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A A

B

Clear plastic cylinder + louvred reflector

Lamp Lumen

8128 8333

1 TC-TEL 1 TC-TEL

8129 8233

1 HME 1 HME

Luminaire poles A

B

Height

Top

Pole

Group

Pole

Group

42 W 3200 85 W 6000

650 600 800 740

3500 - 4000 Ø 76 4000 - 6000 Ø 76

913 · 914 34 914 · 915 · 916 34

906 · 742 32 737 · 748 32

50 · 80 W 4000 125 W 6800

650 600 800 740

3500 - 4000 Ø 76 4000 - 6000 Ø 76

34 913 · 914 914 · 915 · 916 34

906 · 742 32 737 · 748 32

Pole

Pole

A

B

White plastic cylinder

Luminaire poles

Lamp Lumen

8120 8223

1 TC-TEL 1 TC-TEL

8122 8219

1 HME 1 HME

A

B

Height

Top

Group

Group

42 W 3200 85 W 6000

650 600 800 740

3500 - 4000 Ø 76 4000 - 6000 Ø 76

913 · 914 34 914 · 915 · 916 34

906 · 742 32 737 · 748 32

50 · 80 W 4000 125 W 6800

650 600 800 740

3500 - 4000 Ø 76 4000 - 6000 Ø 76

34 913 · 914 914 · 915 · 916 34

906 · 742 32 737 · 748 32

465


Pole-top luminaires with rotationally symmetrical light distribution Mounting heights 3500 - 4500 mm

Luminaires with rotationally symmetrical light distribution. They are equipped with a white light-diffusing plastic cover for soft, pleasantly uniform light or with a clear plastic cover and inside louvred reflector for brilliant directed light. These luminaires are designed to illuminate paths, streets, car parks, driveways and traffic calmed zones. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 32 · 42 W lamps can be used in these luminaires. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8189

10

1 TC-TEL 42 W 1 TC-TEL 32 W x 0,75 H = 4,5 m 0,9 lx 1,6

8 6

9898

10

1 HME 125 W 1 HME 80 W x 0,62 H = 4,5 m lx 2,0 3,6

8 6

3,0 4

466

2

4,6

m

2

4

6

8

10

2

11,5 2

4

6 4

12

m

1 TC-TEL 42 W 1 TC-TEL 32 W x 0,75 H = 4,5 m 0,5 lx 0,9

8

9183

10

1 HME 125 W 1 HME 80 W x 0,62 H = 4,5 m lx 1,0 1,8

8 6

1,6

6,9

4

5,1

8183

10

6

8

10

2

7,2

m

2

4

3,3

4

3,5

6

8

10

6,6

2

14,5

m

2

4

6

8

10


Pole-top luminaires for fluorescent lamps and discharge lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel Clear plastic cover with white louvred reflector or white plastic cover 8189 · 8183 with electronic ballast In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite

A B

Clear plastic cover + louvred reflector

Lamp Lumen

8189 9898

1 TC-TEL 42 W 3200 1 HME 80 ·125 W 6800

Luminaire poles A

B

710 360 710 360

Height

Top

3500 - 4500 Ø 76 3500 - 4500 Ø 76

Pole

Group

Pole

Group

906 · 742 · 743 32 906 · 742 · 743 32

732 · 733 12 732 · 733 12

Pole

Pole

A B

White plastic cover

Lamp Lumen

8183 9183

1 TC-TEL 42 W 3200 1 HME 80 ·125 W 6800

Luminaire poles A

B

710 360 710 360

Height

Top

3500 - 4500 Ø 76 3500 - 4500 Ø 76

Group

906 · 742 · 743 32 906 · 742 · 743 32

Group

732 · 733 12 732 · 733 12

467


Luminaires with symmetrical or asymmetrical light distribution Mounting heights 4000 - 9000 mm

Pole-top luminaires with symmetrical or asymmetrical light distribution, in different sizes and light outputs to illuminate paths, streets, car parks, driveways and traffic calmed zones. Luminaires 8081 and 8180 are also available on request with an additional light opening in the top surface. Apart from street lighting, this produces effective accent lighting above the luminaire as well. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8180

10

6

6

2

17 2

4

7,5

4

12

m

1 HME 125 W 1 HME 80 W x 0,62 H = 5,0 m lx 1,8 4,6

8

6,5

4

8081

10

1 HSE-E 70 W 1 HSE-E 50 W x 0,62 H = 5,0 m lx 1,5 4

8

6

8

10

2

20 2

4

6

8

10

8181

8

1 HSE-E 70 W 1 HSE-E 50 W x 0,62 H = 5,0 m

6 4 10

5

2,0

1,0

0,5

0,2

lx

0

468

16

0,6

12 8

6,8

6

17 6

12

1 HSE-MF 250 W H = 9,0 m 1,2 lx 3,2 8,5

1,9

m

8086

20

1 HME 400 W H = 9,0 m lx 0,2

18

24

30

21

4

30

m

4

8

12

16

20

8082

8

1 HME 125 W 1 HME 80 W x 0,62 H = 5,0 m

6 4

2

m

18 12

14

m

8085

30 24

2

15

9

4,5

2,5

1,3

0,7

0,3

0,1 lx

0 0

2

4

6

8

10

12

14

16

18

20

m

0

2

4

6

8

10

12

14

16

18

20


Pole-top luminaires with symmetrical or asymmetrical light distribution for discharge lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel Safety glass Reflector of pure anodized aluminium In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

A B

Pole-top luminaires · symmetrical

Lamp Lumen

8180 8180 8081 8085 8086

1 1 1 1 1

HSE-E 50 ·70 HIE-CE/S 70 HME 80 ·125 HME 400 HSE-MF 250

W 5600 W 5900 W 6800 W 24 000 W 31 100

Luminaire poles A

B

710 710 710 1000 1000

360 360 360 525 525

A

B

Pole-top luminaires · asymmetrical

Lamp Lumen

8181 8181 8082

1 HSE-E 50 ·70 W 1 HIE-CE/S 70 W 1 HME 80 ·125 W

5600 5900 6800

Height

4000 - 5000 4000 - 5000 4000 - 5000 8000 - 9000 8000 - 9000

Ø Ø Ø Ø Ø

Top

Pole

Group

Pole

Group

76 76 76 76 76

742 · 744 32 742 · 744 32 742 · 744 32 34 726 34 726

733 733 733 837 837

12 12 12 72 72

Pole

Group

Pole

Group

742 · 744 32 742 · 744 32 742 · 744 32

733 733 733

12 12 12

Luminaire poles 710 360 710 360 710 360

Height

Top

4000 - 5000 Ø 76 4000 - 5000 Ø 76 4000 - 5000 Ø 76

469


Pole-top luminaire with rotationally symmetrical light distribution for indirect and direct light Mounting heights 3500 - 5000 mm

Pole-top luminaire with rotationally symmetrical light distribution to illuminate squares, driveways and traffic calmed zones. Luminaires for indirect and direct light. A reflector system directs the main part of the light upwards precisely onto the top reflector. This reflects the light indirectly onto the illuminated surface. A small part of the light emerges directly as shielded light. The effect of these luminaires is fascinating at night. Effective, very uniform light with a high level of visual comfort. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8218

8218

20

1 HIE 100 W H = 5,0 m 0,15 lx

16

0,3

12 0,7

8 120 cd/klm 30°

470

2,2

4

9,2

m

4

8

12

16

20


Pole-top luminaire for discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Clear plastic cover Reflector of pure anodized aluminium In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

B

A C

Pole-top luminaire

Lamp Lumen

8218

1 HIE 100 W 8500

Luminaire poles A

B

C

800 675 140

Height

Top

3500 - 5000 Ø 76

Pole

Group

739 · 738 · 727 · 736 32

Pole

Group

729 · 728 12

471


Pole-top luminaires with adjustable light distribution Mounting heights 4000 - 5000 mm

An adjustable system providing flat, indirect lighting. The light from the high-power floodlight is redirected by a square top reflector, producing particularly soft and uniform light distribution and optimum glare suppression. The floodlight and top reflector are exactly set to one another. The entire system can be infinitely adjusted in the bearings of the pole cap. Symmetrical light distribution is produced when the top reflector is set in a horizontal position, and asymmetrical light distribution when the top reflector is swivelled 0°- 65°. They are ideal where lighting situations require the highest standards of uniformity and no glare. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8220

16 12 8 4 12

0 m

0

4

5

0° 1 HIT-DE 70 W H = 4,0 m 0,2 lx 0,5 1 2

12 6

10

472

8 4 12

8

12

16

0° 1 HIT-DE 150 W H = 5,0 m 0,2 lx 0,5 1 3

0 m

30° 1 HIT-DE 70 W H = 4,0 m 0,5 lx 1 2

12

5

0

8230

24 18

8220

16

m

0

4

8

12

16

8230

24

30° 1 HIT-DE 150 W H = 5,0 m lx 0,5 1 2

18 12 6

15

5

0 0

6

12

18

24

m

0

6

12

18

24


Pole-top luminaires with adjustable light distribution for discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Safety glass Reflector of pure anodized aluminium Luminaires can be infinitely swivelled 0°- 65° In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour silver or white silver – article number white – article number + W

C

A

B

Pole-top luminaires

Luminaire poles

Lamp

Lumen

8220 8230

1 HI/HST-DE 70 W 6900 1 HI/HST-DE 150 W 15 000

A

B

C

1000 1055 650 -1175 1000 1055 650 -1175

Height

Top

4000 - 5000 Ø 76 4000 - 5000 Ø 76

Pole

Group

737 · 748 32 737 · 748 32

Pole

Group

731 · 734 12 731 · 734 12

473


Pole-top luminaires with asymmetrical light distribution Mounting heights 4000 - 5000 mm

Pole-top luminaires for indirect lighting. The spherically arched, elliptical top reflector made of die cast aluminium determines the light distribution. The light from the fitted high-power floodlight is redirected by the top reflector set at 30°. The light is softly and uniformly diffused when distributed asymmetrically. These luminaires are designed for streets, open spaces and squares where lighting situations require the highest standards of uniformity and no glare. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8209

8209

20

1 HST-MF 100 W H = 5,0 m

16

0,5 12

m

474

2 8

4

120 cd/klm 8

1

12

8

4

1 HIT-CE 150 W H = 5,0 m 0,5 lx

lx

1

4

8208

20 16

2

8 120 cd/klm

8208

12

16

20

30°

4

4

16

m

4

8

8

12

16

20


Pole-top luminaires with asymmetrical light distribution for discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Safety glass Reflector of pure anodized aluminium In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour silver or white silver – article number white – article number + W

C

B

A

D

Pole-top luminaires

Luminaire poles

Lamp

Lumen

8209 8208

1 HST-MF 100 W 10 700 1 HIT-CE 150 W 15 500

A

B

C

D

1000 1280 1280 170 1000 1190 1280 170

Height

Top

4000 - 5000 Ø 76 4000 - 5000 Ø 76

Pole

Group

737 · 748 32 737 · 748 32

Pole

Group

731 · 734 12 731 · 734 12

475


Pole-top luminaires with adjustable light distribution Mounting heights 3500 - 7000 mm

Pole-top luminaires for indirect lighting. The light from the fitted high-power floodlight is directed by the top reflector, creating particularly soft and uniform light distribution with optimum glare suppression. The top reflector is adjustable from 0°- 30°. This allows the light distribution to be infinitely adjusted from 0° rotationally symmetrical to 30° asymmetrical. These luminaires are designed for streets, open spaces and squares where lighting situations require the highest standards of uniformity and no glare. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8200 · 8201 · 8210

8200

10

0° 1 HIT-CE 70 W H = 3,5 m lx 0,8 1,6

8 6

3,9

4 90 cd/klm 30°

8200 · 8201 · 8210

2

25 2

4

12

30°

476

m

10

0,5

8 4

8

30° 1 HIT-CE 70 W H = 3,5 m lx 0,1 0,2

16

120 cd/klm

6

8200

20

30°

8

4

4

2

12

1

4

15

m

4

8

12

16

20

m

16

20

30° 1 HIT-CE 150 W H = 5,0 m 0,5 lx 1

12

4

12

8201

20 16

2 4 16

0° 1 HIT 250 W H = 7,0 m lx 0,7 1,4

16 12 3,2 8,2

4

23

m

4

8

12

16

20

8210

30

30° 1 HIT 250 W H = 7,0 m lx 0,5

24 18

1 2

12

8

5

32 4

8210

20

8

3

8

1

8

0° 1 HIT-CE 150 W H = 5,0 m lx 0,2 0,5

16

8

10

m

8201

20

8

12

16

20

6

12

m

6

12

18

24

30


symmetrical

asymmetrical

Pole-top luminaires with adjustable light distribution for discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Safety glass Top reflector can be infinitely adjusted 0°- 30° In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour silver or white silver – article number white – article number + W

B

A C

Pole-top luminaires

Luminaire poles

Lamp

Lumen

8200 8201 8210

1 HIT-CE 70 W 7000 1 HIT-CE 150 W 15 500 1 HIT 250 W 20 000

A

B

C

800 500 140 1000 575 170 1250 750 220

Height

Top

3500 - 4000 Ø 76 4000 - 5000 Ø 76 6000 - 7000 Ø 89

Pole

Group

739 · 738 32 737 · 748 32 749 · 750 32

Pole

Group

729 · 728 12 731 · 734 12

477


Pole-top luminaires with rotationally symmetrical light distribution Mounting heights 3500 - 5000 mm

Pole-top luminaires in two sizes for different light outputs and mounting heights to illuminate squares, parks, driveways and traffic calmed zones. Luminaires with a clear plastic cover and inside louvred reflector for directed light with rotationally symmetrical light distribution. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. Luminaires for a maximum wattage of 42 W can also be operated at 32 W, and luminaires for a maximum wattage of 85 W can be operated at 60 W. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8352

10

1 TC-TEL 42 W H = 4,0 m lx 0,5

8

1,0

6 1,9

4

3,8

2

5,3

m

2

4

6

10

8358

10

1 TC-TEL 85 W H = 5,0 m lx 1,3

8

2,4

6 4,0

4

6,4

2

7,0

m

2

4

6

8

10

8203

10

1 HME 80 W 1 HME 50 W x 0,5 H = 3,5 m lx 0,7 1,2

8 6

2,3

4

4,7

2

7,4

m

2

4

6

8

10

8206

10

1 HME 125 W 1 HME 80 W x 0,62 H = 5,0 m lx 1,5 2,5

8 6

4,2

4

478

8

6,1

2

5,9

m

2

4

6

8

10


Pole-top luminaires for fluorescent lamps and discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Clear plastic cylinder White louvred reflector 8352 · 8358 with electronic ballast In the table we recommend BEGA luminaire poles whose surface quality and colour as well as design and statics match the pole-top luminaires on this double page. A complete overview and technical data of all BEGA luminaire poles, anchorage units and connection boxes are given on pages 500 - 507. Colour silver or white silver – article number white – article number + W

B

A C

Pole-top luminaires

Luminaire poles

Lamp Lumen

A

B

C

Height

8352 8358

1 TC-TEL 1 TC-TEL

42 W 3200 85 W 6000

800 670 140 1000 770 170

3500 - 4000 Ø 76 4000 - 5000 Ø 76

Top

Pole

739 · 738 32 737 · 748 32

Group

Pole

729 · 728 12 731 · 734 12

Group

8203 8206

1 HME 50 · 80 W 4000 1 HME 80 ·125 W 6800

800 670 140 1000 770 170

3500 - 4000 Ø 76 4000 - 5000 Ø 76

739 · 738 32 737 · 748 32

729 · 728 12 731 · 734 12

479


Side-mounted pole-top luminaires with directed light and rotationally symmetrical light distribution Mounting heights 3000 - 8000 mm

Side-mounted pole-top luminaires in three sizes for different light outputs and mounting heights to illuminate squares, driveways, pedestrian areas and car parks. Luminaires with rotationally symmetrical, broad spread light distribution. The slope angle of the luminaires can be infinitely adjusted up to 12°, and therefore directed to meet the requirements of the illuminated surface. Side-mounted pole-top luminaires in this series can be mounted on a pole in single, double or triple configuration. When ordering the luminaires, please state the luminaire configuration. The poles will then be delivered ready for installation with the required mounting holes. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 · 32 W lamps can be used in these luminaires. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8380 8382

8380

10

1 TC-T 26 W H = 3,5 m lx 0,1

8

0,3

6

150 cd/klm

8381 8383 8384

8,5

m

2

4

6

0,6

6

2

480

14

m

2

2

2

m

8

10

1 HME 50 W H = 4,0 m

8

8

10

0,6

16

m

2

2,6

12

0,5 2

4

28

2

4

8

10

10

8

m

6

8

8384

30 4

6

1 HME 250 W H = 8,0 m lx 0,2

8

17

4

20 16

7,4

3,5

2

1 HME 125 W H = 6,0 m lx 1,1

lx

0,1

6

8383

8

26 6

6

10

4

7,9

4

4

8381

10

4

4,5

2

6

2,0

4

m

10

1 HME 80 W H = 4,0 m lx 0,2

8

180 cd/klm

8

8381

10

0,5 1,3

4

2,5

2

1 TC-TEL 32 W H = 4,0 m lx 0,1

8 6

0,8

4

8382

10

8

12

16

20


Wall luminaires page 208

single, double or triple configuration

Side-mounted pole-top luminaires for fluorescent lamps and discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Safety glass Reflector of pure anodized aluminium Adjustable slope angle 0° to 12° 8382 with electronic ballast For lateral screw connection to a pole · Maximum of 3 luminaires on one level. In the table, we recommend BEGA luminaire poles whose surface finish, colour, design and static features match the side-mounted pole-top luminaires on this double page. A complete overview including technical data of all BEGA luminaire poles, anchorage units and connection boxes is given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

A B

C

Side-mounted pole-top luminaires Lumen

Luminaire poles

Lamp

A

B

C

8380 8382

1 TC-T 26 W 1 TC-TEL 32 W

1800 2400

190 320 290 220 350 320

3000 - 3500 Ø 76 918 · 913 3500 - 4000 Ø 76 913 · 914

8381 8383 8384

1 HME 50 · 80 W 4000 1 HME 125 W 6800 1 HME 250 W 14 000

190 320 290 220 350 320 300 470 430

3500 - 4000 Ø 76 913 · 914 34 789 · 791 14 4000 - 6000 Ø 76 914 · 915 · 916 34 791 · 794 14 6000 - 8000 Ø 76 916 · 917 · 726 34 835 · 836 72

Height

Top

Pole

Group

Pole

Group

34 788 · 789 14 34 789 · 791 14

481


Pole-top luminaires with symmetrical or asymmetrical light distribution Mounting heights 4000 - 6000 mm

A group of luminaires to illuminate squares, driveways, urban and suburban streets either as: • pole-top luminaires for central installation on a pole or as • outrigger luminaire in single and double configuration as pole-top luminaires ready for installation This type of luminaire is also available in triple and quadruple configuration. Symmetrical light distribution for soft, uniform light or asymmetrical light distribution for flat beam light. The optical system of the luminaires with asymmetrical light distribution can be adjusted after installation, allowing the light distribution to be adapted to the location. These luminaires with a high vertical illuminance provide uniform lighting and a high level of visual comfort. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8090

8091

60 cd/klm

240 cd/klm C 180 - C 0 C 195 - C 15 C 270 - C 90

8090

10

6

6

2

20 2

4

4,2

4

8,4

m

1 HME 125 W 1 HME 80 W x 0,62 H = 5,0 m lx 1,1 2,1

8

3,6

4

8090

10

1 HME 125 W 1 HME 80 W x 0,62 H = 4,0 m lx 0,8 1,6

8

6

8

10

8,4

2

16

m

2

4

6

8

10

8091

8

1 HME 125 W 1 HME 80 W x 0,62 H = 5,0 m

6 4 2

16

8

4

8

10

2

1

0,5

lx

0 m

0

2

4

6

8821

10

m

2

4

6

8

10

20

8821

2,1 4,4

4

6 13

18

1 HME 125 W H = 5,0 m lx 1

6

2,8

2

16

8

1,4

6 4

14

10

1 HME 80 W H = 5,0 m lx 0,6

8

12

10

2

21

m

2

4

6

8

10

8881

8

1 HME 125 W 1 HME 80 W x 0,62 H = 5,0 m

6 4 2 22

0 m

0

2

4

12

6

8

6

3

10

8822

10

m

2

4

6

8

10

0,4

18

lx

20

8822

2 HME 125 W H = 5,0 m lx 2 4,2 8,8

4

12 26

16

6

5,6

2

14

8

2,8

6 4

12

0,6

10

2 HME 80 W H = 5,0 m lx 1,2

8

1

1,7

20

2

42

m

2

4

6

8

10

8882

8

2 HME 125 W 2 HME 80 W x 0,62 H = 5,0 m

6 4 2 44

0 m

482

0

2

4

24

6

12

8

10

6

3,4

12

14

2

1,2

16

18

0,8

20

lx


symmetrical

asymmetrical

Pole-top luminaires or single and double pole-top luminaires with outrigger arms with symmetrical and asymmetrical light distribution for discharge lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel 8090 · 8821 · 8822 White plastic diffuser 8091 · 8881 · 8882 Clear plastic diffuser with optical texture Reflector of pure anodized aluminium In the table, we recommend BEGA luminaire poles whose surface finish, colour, design and static features match the pole-top luminaires on this double page. A complete overview including technical data of all BEGA luminaire poles, anchorage units and connection boxes is given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A B

A

Pole-top luminaires

Luminaire poles

Lamp

Lumen

8090 8091

1 HME 80 ·125 W 1 HME 80 ·125 W

6800 6800

A

B

650 540 650 540

symmetrical asymmetrical

Height

Top

Pole

Group

Pole

Group

4000 - 5000 Ø 76 914 · 915 34 791 · 792 · 794 14 4000 - 5000 Ø 76 914 · 915 34 791 · 792 · 794 14

B

A C

C

Single pole-top luminaires with outrigger arm

Lamp

Lumen

8821 8881

1 HME 80 ·125 W 1 HME 80 ·125 W

Luminaire poles

A

B

C

6800 symmetrical 650 1100 1050 6800 asymmetrical 650 1100 1050

Double pole-top luminaires with outrigger arm Lumen

Height

Top

Pole

Group

Pole

Group

4000 - 6000 Ø 76 914 · 915 · 916 34 791 · 794 14 4000 - 6000 Ø 76 914 · 915 · 916 34 791 · 794 14 Luminaire poles

Lamp

A

B

C

8822 8882

2 HME 80 ·125 W 13 600 symmetrical 650 1100 2100 2 HME 80 ·125 W 13 600 asymmetrical 650 1100 2100

Height

Top

Pole

Group

Pole

Group

4000 - 6000 Ø 76 914 · 915 · 916 34 791 · 794 14 4000 - 6000 Ø 76 914 · 915 · 916 34 791 · 794 14

483


Pole-top luminaires with asymmetrical light distribution Mounting heights 3000 - 9000 mm

Luminaires with asymmetrical, flat beam light distribution, available in three sizes for different light outputs. They are designed to illuminate streets, squares, driveways and pedestrian areas. Pole-top luminaires ready for installation in single or double configuration. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

9900

4

1 HME 50 W H = 3,0 m

3 2 1

16

25

8

4

2

1

0,5

0,3 lx

0 m

0

1

2

3

4

5

6

7

8

9

10

9998

8

1 HME 125 W 1 HME 80 W x 0,62 H = 4,0 m

6 4 2

40

20 10 5

2

1

0,5 0,3 0,2

lx

0 m

0

2

4

6

8

10

12

14

16

18

20

8889

8

1 HSE-E 70 W 1 HSE-E 50 W x 0,62 H = 4,0 m

6 4 2

34

17

9

4

1,6 0,8 0,4 0,2 0,15

lx

0 m

0

2

4

6

8

10

12

14

16

18

20

9804

12

1 HME 250 W

8904

9

1 HIE 250 W x 1,35 1 HSE-MF 250 W x 2,22 H = 6,0 m

6 3

40

15

5

2

1

12

15

18

0,5

0,2

lx

0 m

484

0

3

6

9

21

24

27

30


Wall luminaires page 194

Single and double pole-top luminaires with asymmetrical light distribution for discharge lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel Safety glass with optical texture Reflector of pure anodized aluminium In the table, we recommend BEGA luminaire poles whose surface finish, colour, design and static features match the pole-top luminaires on this double page. A complete overview including technical data of all BEGA luminaire poles, anchorage units and connection boxes is given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

B

C

A

C

Single pole-top luminaires

Lamp

9900

1 HME

Luminaire poles

Lumen

A

B

C

50 W

2000

500 410 450

3000 - 3500 Ø 100

9998 8889 8889

80 ·125 W 1 HME 50 ·70 W 1 HSE-E 70 W 1 HIE-CE/S

6800 5600 5900

620 495 550 620 495 550 620 495 550

3500 - 4500 Ø 120 965 · 974 · 989 31 3500 - 4500 Ø 120 965 · 974 · 989 31 3500 - 4500 Ø 120 965 · 974 · 989 31

9804 8904

250 W 14 000 1 HME 1 HIE · HSE-MF 250 W 31 100

740 630 650 740 630 650

6000 - 9000 Ø   76 916 · 917 · 726 34 837 6000 - 9000 Ø   76 916 · 917 · 726 34 837

Double pole-top luminaires

Lamp

9906

2 HME

Height

Top

Pole

958 · 959

Group

Pole

Group

31 72 72

Luminaire poles

Lumen

A

B

C

Height

50 W

4000

500 410 900

3000 - 3500 Ø 100

Top

Pole

9999 8890 8890

80 ·125 W 13 600 2 HME 50 ·70 W 11 200 2 HSE-E 70 W 11 800 2 HIE-CE/S

620 495 1100 620 495 1100 620 495 1100

3500 - 4500 Ø 120 965 · 974 · 989 31 3500 - 4500 Ø 120 965 · 974 · 989 31 3500 - 4500 Ø 120 965 · 974 · 989 31

9849 8949

250 W 28 000 2 HME 2 HIE · HSE-MF 250 W 62 200

740 630 1300 740 630 1300

6000 - 9000 Ø   76 916 · 917 · 726 34 837 6000 - 9000 Ø   76 916 · 917 · 726 34 837

958 · 959

Group

Pole

Group

31 72 72

485


Pole-top luminaires with asymmetrical light distribution Mounting heights 3000 - 9000 mm

Luminaires with asymmetrical, flat beam light distribution, available in two sizes for different light outputs. They are designed to illuminate streets, squares, driveways and pedestrian areas. Pole-top luminaires ready for installation in single or double configuration. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8073

8

2 TC-D 26 W H = 5,0 m

6 4 2 16

0 m

0

8

2

4

4

2

6

8

1

10

0,5

12

0,2

14

16

0,1 lx

18

20

8071

8

1 HME 125 W 1 HME 80 W x 0,62 H = 5,0 m

6 4 2 32

0

Wall luminaires page 228

m

0

2

16

4

8

6

8

4

2

10

12

1

14

0,5

16

0,2 lx

18

20

8074

8

1 HSE-E 70 W 1 HSE-E 50 W x 0,62 H = 5,0 m

6 4 2

34

20

10

5,2 2,6

0,9

0,4

0,2

0,1

lx

0 m

0

2

4

6

8

10

12

14

16

18

20

8171

8

1 HME 250 W

8191

6

1 HIE 250 W x 1,36 1 HSE-MF 250 W x 2,22 H = 9,0 m

4 2

24

16

10

6

4

3

12

14

16

2

0 m

0

2

4

6

8

10

18

20

lx


Single and double pole-top luminaires with asymmetrical light distribution for fluorescent lamps and discharge lamps Protection class IP 44 Die cast aluminium, aluminium and stainless steel · Safety glass Reflector of pure anodized aluminium In the table, we recommend BEGA luminaire poles whose surface finish, colour, design and static features match the pole-top luminaires on this double page. A complete overview including technical data of all BEGA luminaire poles, anchorage units and connection boxes is given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

B

C

A

C

Single pole-top luminaires

Lamp

8073

2 TC-D

Luminaire poles

Lumen

A

B

C

26 W

3600

350 600 600

3000 - 6000 Ø 76

8071 8074 8074

80 ·125 W 1 HME 50 ·70 W 1 HSE-E 70 W 1 HIE-CE/S

6800 5600 5900

350 600 600 350 600 600 350 600 600

3000 - 6000 Ø 76 918 · 914 · 915 · 916 34 788 · 791 · 794 14 3000 - 6000 Ø 76 918 · 914 · 915 · 916 34 788 · 791 · 794 14 3000 - 6000 Ø 76 918 · 914 · 915 · 916 34 788 · 791 · 794 14

8171 8191

250 W 14 000 1 HME 1 HIE · HSE-MF 250 W 31 100

450 750 730 450 750 730

7000 - 9000 Ø 76 917 · 726 7000 - 9000 Ø 76 917 · 726

Double pole-top luminaires

Lamp

8075

4 TC-D

Height

Top

Pole

Group

918 · 914 · 915 · 916 34

Pole

Group

788 · 791 · 794 14

34 835 · 836 · 837 72 34 835 · 836 · 837 72

Luminaire poles

Lumen

A

B

C

Height

26 W

7200

350 600 1200

3000 - 6000 Ø 76

Top

Pole

Group

8072 8076 8076

80 ·125 W 13 600 2 HME 50 ·70 W 11 200 2 HSE-E 70 W 11 800 2 HIE-CE/S

350 600 1200 350 600 1200 350 600 1200

3000 - 6000 Ø 76 918 · 914 · 915 · 916 34 788 · 791 · 794 14 3000 - 6000 Ø 76 918 · 914 · 915 · 916 34 788 · 791 · 794 14 3000 - 6000 Ø 76 918 · 914 · 915 · 916 34 788 · 791 · 794 14

8172 8192

250 W 28 000 2 HME 2 HIE · HSE-MF 250 W 62 200

450 750 1460 450 750 1460

7000 - 9000 Ø 76 917 · 726 7000 - 9000 Ø 76 917 · 726

918 · 914 · 915 · 916 34

Pole

Group

788 · 791 · 794 14

34 835 · 836 · 837 72 34 835 · 836 · 837 72

487


Pole-top luminaires with asymmetrical light distribution Mounting heights 4000 - 9000 mm

Luminaires with asymmetrical, flat beam light distribution, available in two sizes for different light outputs. They are designed to illuminate streets, squares, driveways and pedestrian areas. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8283

8

2 TC-D 26 W H = 5,0 m

6 4 2 10

0 m

0

2

5

4

6

8

2

1

10

12

0,5 0,2

14

lx

16

18

20

8284

8

1 HME 125 W 1 HME 80 W x 0,62 H = 5,0 m

6 4 2 20

0 m

0

2

10

4

6

8

5

2

10

1

12

14

0,2 lx

0,5

16

18

20

8285

8

1 HST-MF 70 W 1 HIT-CE/S 70 W H = 6,0 m

6 4 2 20

0 m

0

2

4

10

6

8

5

10

2

12

14

1

16

lx

0,5

18

20

8249

12

1 HST-MF 150 W 1 HIT-CE/S 150 W x 0,83 H = 6,0 m

9 6 3 40

0 m

0

3

6

15

9

5

12

2

15

1

18

0,5

21

0,2

24

27

lx

30

8287

8

1 HME 250 W H = 7,0 m

6 4 2 32

0 m

0

2

4

16

6

8

8

10

12

4

14

2

16

18

1 lx

20

8289

16

1 HST-MF 250 W 1 HIT 250 W x 0,60 H = 9,0 m

12 8 4 50

0 m

488

0

4

8

20

12

10

16

20

5

2

24

1

28

lx

0,5

32

36

40


Pole-top luminaires for fluorescent lamps and discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Safety glass Reflector of pure anodized aluminium Luminaires open without tools for maintenance and relamping. In the table, we recommend BEGA luminaire poles whose surface finish, colour, design and static features match the pole-top luminaires on this double page. A complete overview including technical data of all BEGA luminaire poles, anchorage units and connection boxes is given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

B

A C

Pole-top luminaires

Lamp

8283

2 TC-D

Luminaire poles

Lumen

A

B

C

Height

26 W

3600

330 145 490

4000 - 6000 Ø 76

Top

Pole

Group

8284 8285 8249

80 ·125 W 6800 1 HME 1 HIT-CE/S · HST-MF 70 W 7000 1 HIT-CE/S · HST-MF 150 W 17 500

330 145 490 330 145 490 330 145 490

4000 - 6000 Ø 76 914 · 915 · 916 34 791 · 794 14 4000 - 6000 Ø 76 914 · 915 · 916 34 791 · 794 14 4000 - 6000 Ø 76 914 · 915 · 916 34 791 · 794 14

8287 8289

1 HME 1 HIT · HST-MF

250 W 14 000 250 W 33 200

410 165 600 410 165 600

7000 - 9000 Ø 76 917 · 726 7000 - 9000 Ø 76 917 · 726

914 · 915 · 916 34

Pole

Group

791 · 794 14

34 836 · 837 72 34 836 · 837 72

489


Pole-top luminaires with asymmetrical light distribution Mounting heights 4000 - 9000 mm

Luminaires with asymmetrical, flat beam light distribution, available in two sizes for different light outputs to illuminate streets, squares, driveways and pedestrian areas. The slope angle of the luminaires can be adjusted to 0° or 15° and therefore to the illuminated surface. Pole-top luminaires ready for installation in single or double configuration. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8252

8

2 TC-D 26 W H = 5,0 m

6 4 2 10

0 m

0

2

4

5

6

8

2

1

10

12

0,5 0,2

14

lx

16

18

Wall luminaires page 228

20

8258

8

1 HME 125 W 1 HME 80 W x 0,62 H = 5,0 m

6 4

2 20

0 0

2

4

10

6

8

5

2

10

1

12

14

0,5

16

18

0,2 lx

1 HST-MF 150 W 1 HIT-CE/S 150 W x 0,83 H = 6,0 m

9 6

2

4

6

8

5

10

2

12

14

1

16

lx

0,5

18

20

8281

8

1 HME 250 W H = 7,0 m

6

2 40

0 0

3

6

15

9

12

5

2

15

1

18

0,5

21

0,2

24

27

lx

1 HST-MF 250 W 1 HIT 250 W x 0,60 H = 9,0 m

8

32

0 m

30

8295

16 12

0

2

4

16

6

8

8

10

12

4

14

1 lx

2

16

18

20

8396

16

1 HST-MF 400 W 1 HIT 400 W x 0,57 H = 9,0 m

12 8

4

4 50

0

490

0

10

4

3

m

20

0 m

20

8293

12

m

1 HST-MF 70 W 1 HIT-CE/S 70 W H = 6,0 m

6 4

2

m

8269

8

0

4

8

20

12

10

16

20

5

2

24

1

28

lx

0,5

32

36

40

50

0 m

0

4

8

12

20

16

20

10

5

24

2

28

1

32

lx

0,5

36

40


Single and double pole-top luminaires with asymmetrical light distribution for fluorescent lamps and discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel Safety glass Reflector of pure anodized aluminium Adjustable slope angle 0° or 15° Luminaires open without tools for maintenance and relamping. In the table, we recommend BEGA luminaire poles whose surface finish, colour, design and static features match the pole-top luminaires on this double page. A complete overview including technical data of all BEGA luminaire poles, anchorage units and connection boxes is given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

B

A C

C

Single pole-top luminaires

Lamp

8252 8258 8269 8293

2 1 1 1

8281 8295 8396

1 HME 1 HIT · HST-MF 1 HIT · HST-MF

Luminaire poles

TC-D 26 80 ·125 HME HIT-CE/S · HST-MF 70 HIT-CE/S · HST-MF 150

Lumen

A

B

W 3600 W 6800 W 7000 W 17 500

330 330 330 330

140 140 140 140

250 W 14 000 250 W 33 200 400 W 56 500

C

630 630 630 630

410 165 760 410 165 760 410 165 760

Double pole-top luminaires

Lamp

8297 8298 8299 8294

4 2 2 2

8282 8296 8399

2 HME 2 HIT · HST-MF 2 HIT · HST-MF

Height

4000 - 6000 4000 - 6000 4000 - 6000 4000 - 6000

Top Ø 76 Ø 76 Ø 76 Ø 76

Pole

Group

914 · 915 · 916 914 · 915 · 916 914 · 915 · 916 914 · 915 · 916

7000 - 9000 Ø 76 917 · 726 7000 - 9000 Ø 76 917 · 726 7000 - 9000 Ø 76 917 · 726

34 34 34 34

Pole

Group

791 · 794 14 791 · 794 14 791 · 794 14 791 · 794 14

34 836 · 837 72 34 836 · 837 72 34 836 · 837 72

Luminaire poles

TC-D 26 80 ·125 HME HIT-CE/S · HST-MF 70 HIT-CE/S · HST-MF 150

Lumen

A

W 7200 W 13 600 W 14 000 W 35 000

330 330 330 330

250 W 28 000 250 W 66 400 400 W 113 000

B

C

140 1260 140 1260 140 1260 140 1260

410 165 1510 410 165 1510 410 165 1510

Height

4000 - 6000 4000 - 6000 4000 - 6000 4000 - 6000

Top Ø 76 Ø 76 Ø 76 Ø 76

Pole

Group

914 · 915 · 916 914 · 915 · 916 914 · 915 · 916 914 · 915 · 916

7000 - 9000 Ø 76 917 · 726 7000 - 9000 Ø 76 917 · 726 7000 - 9000 Ø 76 917 · 726

34 34 34 34

Pole

Group

791 · 794 14 791 · 794 14 791 · 794 14 791 · 794 14

34 836 · 837 72 34 836 · 837 72 34 836 · 837 72

491


Outrigger luminaires with asymmetrical light distribution Mounting heights 5000 - 9000 mm

New outrigger system with infinitely adjustable mounting heights. The mounting height can be adjusted from the horizontal position by ± 1500 mm. The light distribution can be directed precisely onto the illuminated surface. Luminaires with spherical reflectors and asymmetrical, flat beam light distribution. They are designed to illuminate streets, squares and driveways. Pole-top luminaires ready for installation in single or double configuration. We also supply these luminaires on request with the light distribution of the pole-top luminaires on page 498. All technical data are given in the instructions for use for these luminaires. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

8253

12

2 HST-MF 70 W 2 HIT-CE/S 70 W H = 6,0 m

9 6

3 20

0 0

3

6

10

5

9

12

2 1

15

0,5

18

0,2

21

24

lx

27

2 HST-MF 250 W 2 HIT 250 W x 0,61 H = 9,0 m

8

0

3

6

20

9

10

12

5

2

15

18

0,5

1

21

24

27

lx

30

8259

16

2 HST-MF 400 W 2 HIT 400 W x 0,57 H = 9,0 m

12 8

4

4 60

0

492

40

0 m

30

8257

16 12

m

2 HST-MF 150 W 2 HIT-CE/S 150 W x 0,83 H = 7,0 m

9 6

3

m

8254

12

0

4

8

30

12

15

16

20

5

2

1

0,5

24

28

32

36

lx

40

50

0 m

0

4

8

12

20

16

10

20

24

5

28

2

1

0,5 lx

32

36

40


Single and double outrigger luminaires with asymmetrical light distribution for discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel · Safety glass Reflector of pure anodized aluminium Adjustable slope angle Luminaires open without tools for maintenance and relamping. In the table, we recommend BEGA luminaire poles whose surface finish, colour, design and static features match the pole-top luminaires on this double page. A complete overview including technical data of all BEGA luminaire poles, anchorage units and connection boxes is given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

1500

1500

B

A C C

Single outrigger luminaires

Lamp

8052 8053 8152 8153

1 1 1 1

HIT-CE/S · HST-MF 70 HIT-CE/S · HST-MF 150 250 HIT · HST-MF 400 HIT · HST-MF

Luminaire poles

Lumen

A

W 7000 W 17 500 W 33 200 W 56 500

330 330 410 410

B

C

145 2500 145 2500 165 2600 165 2600

Double outrigger luminaires

Lamp

8253 8254 8257 8259

2 2 2 2

HIT-CE/S · HST-MF 70 HIT-CE/S · HST-MF 150 250 HIT · HST-MF 400 HIT · HST-MF

Height

5000 - 7000 5000 - 7000 7000 - 9000 7000 - 9000

Top Ø 76 Ø 76 Ø 76 Ø 76

Pole

Group

886 · 834 · 835 886 · 834 · 835 835 · 836 · 837 835 · 836 · 837

72 72 72 72

Luminaire poles

Lumen

A

W W W W

14 000 35 000 66 400 113 000

330 330 410 410

B

C

145 5000 145 5000 165 5200 165 5200

Height

5000 - 7000 5000 - 7000 7000 - 9000 7000 - 9000

Top Ø 76 Ø 76 Ø 76 Ø 76

Pole

Group

886 · 834 · 835 886 · 834 · 835 835 · 836 · 837 835 · 836 · 837

72 72 72 72

493


Pole-top luminaires with asymmetrical light distribution Mounting heights 4000 - 9000 mm

9019

8

2 TC-D 26 W H = 5,0 m

6 4 2

15

9

6

3

2

4

6

8

1

0,5

0,2

lx

0 m

0

10

12

14

16

18

20

9092

8

1 HSE-E 70 W 1 HIE-CE/S 70 W H = 5,0 m

6 4 2

26 17

8,6

4,3

1,7

0,9

12

14

lx

0,4 0,2

0 m

Luminaires with asymmetrical, flat beam light distribution, available in two sizes for different light outputs to illuminate large surfaces, streets, squares and pedestrian areas. We supply pole tops for the installation of 2 or 3 pole-top luminaires on poles. If you wish to install the pole-top luminaires on this double page on walls, wood poles or other building structures, we supply wall arms with different slope angles. Wall arms and pole tops are shown in the tables. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

0

2

4

6

8

10

16

18

20

9073

8

1 HME 125 W 1 HME 80 W x 0,62 H = 5,0 m

6 4 2

30

20

10

5

2

1

12

14

0,5 0,25

lx

0 m

0

2

4

6

8

10

16

18

20

9093

8

1 HSE-MF 150 W 1 HIE-CE/S 150 W H = 6,0 m

6 4 2

40

20

10 7 5

3

2

1

0,5 lx

0 m

0

2

4

6

8

10

12

14

16

18

20

9164

8

2 HSE-E 70 W 2 HIE-CE/S 70 W H = 7,0 m

6 4 2

30 22 15 10

6,8

lx

4,3 2,5 1,7

0 m

0

2

4

6

8

10

12

14

16

18

20

9163

8

2 HME 125 W 2 HME 80 W x 0,62 H = 7,0 m

6 4 2

34 26 18 12

8

5

3

2

lx

0 m

0

2

4

6

8

10

12

14

16

18

20

9316

8

1 HME 250 W

9416

6

1 HIE 250 W x 1,36 1 HSE-MF 250 W x 2,22 H = 9,0 m

4 2

33 28 22 17 11 8,4

5,6

3,9

2,8

lx

0 m

0

2

4

6

8

10

12

14

16

18

20

9616

16

1 HME 400 W

9716

12

1 HIE 400 W x 1,36 1 HSE-MF 400 W x 2,31 H = 9,0 m

8 4

15

7,6 5,1

2,5 1,5 1

0,5

0,25 lx

0 m

494

0

4

8

12

16

20

24

28

32

36

40


Pole-top luminaires with asymmetrical light distribution for fluorescent lamps and discharge lamps Protection class IP 44 Die cast aluminium and stainless steel Safety glass 9019 Clear plastic diffuser with optical texture Reflector of pure anodized aluminium

Luminaires open without tools for maintenance and relamping. We supply the following as accessories for these pole-top luminaires • pole tops for the installation of 2 or 3 of the luminaires on this double page on a luminaire pole • wall arms with slope angle 12° or 3° for the installation of the luminaires on surfaces, corners of buildings or other building structures In the table, we recommend BEGA luminaire poles whose surface finish, colour, design and static features match the pole-top luminaires on this double page. A complete overview including technical data of all BEGA luminaire poles, anchorage units and connection boxes is given on pages 500 - 507. Colour graphite

B

305 B

C

306

A

307

A

308 C

Pole-top luminaires

Lamp

9019 9092 9073 9093

2 1 1 1

9164 9163 9316 9416 9616 9716

2 2 1 1 1 1

A

B

TC-D 26 70 HIE-CE/S · HSE-E 80 ·125 HME HIE-CE/S · HSE-MF 150

W 3600 W 5900 W 6800 W 17 000

310 310 310 310

155 155 155 155

400 400 400 400

4000 - 6000 4000 - 6000 4000 - 6000 5000 - 7000

Ø 76 Ø 76 Ø 76 Ø 76

914 · 915 · 916 914 · 915 · 916 914 · 915 · 916 915 · 916 · 917

34 34 34 34

791 · 794 14 791 · 794 14 791 · 794 14 794 14

70 HIE-CE/S · HSE-E 80 ·125 HME 250 HME 250 HIE · HSE-MF 400 HME 400 HIE · HSE-MF

W W W W W W

360 360 360 360 360 360

190 190 190 190 190 190

610 610 610 610 610 610

5000 - 7000 5000 - 7000 5000 - 7000 5000 - 7000 7000 - 9000 7000 - 9000

Ø 76 Ø 76 Ø 76 Ø 76 Ø 76 Ø 76

915 · 916 · 917 915 · 916 · 917 915 · 916 · 917 915 · 916 · 917 917 · 726 917 · 726

34 34 34 34 34 34

794 14 794 14 794 14 794 14 836 · 837 72 836 · 837 72

Wall arms 305 306

Luminaire poles Lumen

Wall arm slope angle 12° Wall arm slope angle   3°

11 800 13 600 14 000 31 100 24 000 55 500

C

Height

Top

Pole

Group

Pole

Group 12°

305

306

Pole tops · Ø 76 307 308

Pole top for 2 luminaires Pole top for 3 luminaires

495


Pole-top luminaires with asymmetrical light distribution Mounting heights 4000 - 9000 mm

The asymmetrical, flat beam light distribution of these luminaires is ideal for illuminating streets according to DIN EN 13 201. The slope angle of the luminaires is adjustable to 0° or 15° and can be directed onto the illuminated surface. These pole-top luminaires ready for installation are available in two sizes for single and double configuration. The luminaires for fluorescent lamps TC-TEL are equipped with electronic ballasts. 26 · 32 · 42 W lamps can be used in luminaires 9050 and 9122. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

9050

8

1 TC-TEL 42 W H = 5,0 m

6 4 2 20

0 m

9054

8

1 TC-TEL 57 W H = 5,0 m

6 4

0

2

4

10

5

6

8

2

10

1

12

0,5

14

0,2

16

18

lx

1 HST-MF 70 W H = 6,0 m

6 4

10

12

14

0,2

16

lx

18

20

9055

1 HIT-CE/S 70 W H = 6,0 m

6

20

0 0

2

4

10

6

5

8

10

2

12

14

1

0,5

16

lx

18

20

9057

12

1 HIT-CE/S 100 W H = 6,0 m

9

3 20

0 0

2

4

10

6

8

5

10

2

12

14

1

16

lx

0,5

18

1 HST-MF 100 W H = 6,0 m

9

20

0 m

20

9057

12

0

3

6

10

9

5

2

12

15

1 0,5

0,2

18

21

lx

24

27

30

9222

12

1 HST-MF 150 W 1 HIT-CE/S 150 W x 0,83 H = 8,0 m

9 6

6

3

3 20

0 0

3

6

10

9

5

12

2

15

1 0,5

18

0,2

21

lx

24

27

1 HST-MF 250 W 1 HIT 250 W x 0,60 H = 9,0 m

8

20

0 m

30

9252

16 12

0

3

6

9

10

12

15

5

18

2

21

1

24

0,5

27

lx

30

9253

16

1 HST-MF 400 W 1 HIT 400 W x 0,57 H = 9,0 m

12 8

4

4 50

0

496

8

0,5

6

2

m

6

1

8

m

20

9055

8

m

4

2

2 20

0

m

2

5

4

2

m

0

10

0

4

8

20

12

16

10

20

5

24

2

1

28

0,5

32

lx

36

40

50

0 m

0

4

8

12

20

16

10

20

24

5

2

28

1

32

0,5

36

lx

40


Wall luminaires page 230

Single and double pole-top luminaires with asymmetrical light distribution for fluorescent lamps and discharge lamps Protection class IP 65 Aluminium, die cast aluminium and stainless steel · Safety glass · Reflector of pure anodized aluminium Adjustable slope angle 0° or 15° · 9050 · 9054 · 9122 · 9127 with electronic ballast On request, these luminaires can also be supplied for relamping without tools. In the table, we recommend BEGA luminaire poles whose surface finish, colour, design and static features match the pole-top luminaires on this double page. A complete overview including technical data of all BEGA luminaire poles, anchorage units and connection boxes is given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

B

A

C

C

Single pole-top luminaires

Lamp

9050 9054

1 TC-TEL 1 TC-TEL

9055 9057 9222 9252 9253

1 1 1 1 1

Luminaire poles

Lumen

42 W 57 W

3200 4300

HIT-CE/S · HST-MF 50 ·70 W 7000 HIT-CE/S · HST-MF 100 W 10 700 HIT-CE/S · HST-MF 150 W 17 500 250 W 33 200 HIT · HST-MF 400 W 56 500 HIT · HST-MF

A

B

C

Lamp

9122 9127

2 TC-TEL 2 TC-TEL

9141 9155 9191 9192 9193

2 2 2 2 2

Top

Pole

Group

420 100 510 420 100 510

4000 - 6000 Ø 76 914 · 915 · 916 34 4000 - 6000 Ø 76 914 · 915 · 916 34

420 420 620 620 620

100 100 130 130 130

4000 - 6000 4000 - 6000 6000 - 9000 6000 - 9000 6000 - 9000

A

B

510 510 710 710 710

Double pole-top luminaires

Height

Ø 76 Ø 76 Ø 76 Ø 76 Ø 76

914 · 915 · 916 914 · 915 · 916 916 · 917 · 726 916 · 917 · 726 916 · 917 · 726

34 34 34 34 34

Pole

Group

791 · 794 14 791 · 794 14 791 · 794 14 791 · 794 14 836 · 837 72 836 · 837 72 836 · 837 72

Luminaire poles

Lumen

42 W 57 W

6400 8600

HIT-CE/S · HST-MF 50 ·70 W 14 000 HIT-CE/S · HST-MF 100 W 21 400 HIT-CE/S · HST-MF 150 W 35 000 250 W 66 400 HIT · HST-MF 400 W 113 000 HIT · HST-MF

C

Height

Top

Pole

Group

420 100 1020 420 100 1020

4000 - 6000 Ø 76 914 · 915 · 916 34 4000 - 6000 Ø 76 914 · 915 · 916 34

420 420 620 620 620

4000 - 6000 4000 - 6000 6000 - 9000 6000 - 9000 6000 - 9000

100 1020 100 1020 130 1420 130 1420 130 1420

Ø 76 Ø 76 Ø 76 Ø 76 Ø 76

914 · 915 · 916 914 · 915 · 916 916 · 917 · 726 916 · 917 · 726 916 · 917 · 726

34 34 34 34 34

Pole

Group

791 · 794 14 791 · 794 14 791 · 794 14 791 · 794 14 836 · 837 72 836 · 837 72 836 · 837 72

497


Surface washers as pole-top luminaires Mounting heights 4000 - 9000 mm

The asymmetrical light distribution of these surface washers is particularly suitable for in-depth illumination of surfaces and squares. The slope angle of the surface washers can be adjusted. The light distribution can be directed precisely onto the illuminated surface. Pole-top luminaires ready for installation in three sizes in single and double configuration. On request, we supply luminaires of this design in quadruple configuration. To special order, these luminaires are also available with other electrical equipment and in Safety class II.

12 0,1

8

8141

0,2 0,5 1 2 4 8 16

16

1 HIT-DE-CE 70 W 1 HST-DE 70 W H = 5,0 m

0,1

4 0 m

20

16

12

8

4

0

4

8

1 2

16

0,2 0,5

8

16

20

8145

1 HIT-DE-CE 150 W 1 HST-DE 150 W H = 6,0 m

4 8 16

12

12

0,5 0,2

32

4 0 m

20

16

12

8

4

0

4

18 12

12

16

20

8244

0,2 0,5 1 2 5 10 20

24

8

1 HIT-DE-CE 250 W 1 HST-DE 250 W H = 7,0 m

6 0 m

30

24

18

12

6

0

6

0,5 1

24

30

1 HIT-DE-CE 400 W 1 HST-DE 400 W x 1,33 H = 9,0 m

4 8 16 32 64

16 12

18

8235

2 24

12

1 0,5

6 0 m

498

30

24

16

12

6

0

6

12

16

24

30


Wall luminaires page 224

Single and double pole-top luminaires with asymmetrical light distribution for discharge lamps Protection class IP 65 Die cast aluminium, aluminium and stainless steel · Safety glass Reflector of pure anodized aluminium Adjustable slope angle 0° to 90° In the table, we recommend BEGA luminaire poles whose surface finish, colour, design and static features match the pole-top luminaires on this double page. A complete overview including technical data of all BEGA luminaire poles, anchorage units and connection boxes is given on pages 500 - 507. Colour graphite or silver graphite – article number silver – article number + A

B

B

A

A

C

C

Single pole-top luminaires

Lamp

8141 8145 8244 8235

1 1 1 1

HI/HST-DE HI/HST-DE HI/HST-DE HI/HST-DE

70 150 250 400

Luminaire poles

Lumen

A

B

W W W W

6900 15 000 25 500 48 000

225 225 315 420

290 290 290 420

Lumen

A

B

W W W W

13 800 30 000 51 000 96 000

225 225 315 420

C

500 500 600 800

Double pole-top luminaires

Lamp

8142 8146 8246 8236

2 2 2 2

HI/HST-DE HI/HST-DE HI/HST-DE HI/HST-DE

70 150 250 400

Height

4000 - 5000 5000 - 6000 6000 - 7000 7000 - 9000

Top Ø 76 Ø 76 Ø 76 Ø 76

Pole

Group

Pole

Group

914 · 915 34 915 · 916 34 916 · 917 34 917 · 726 34

791 · 794 14 794 14 834 · 835 72 836 · 837 72

Pole

Pole

Luminaire poles C

290 1000 290 1000 290 1200 420 1600

Height

4000 - 5000 5000 - 6000 6000 - 7000 7000 - 9000

Top Ø 76 Ø 76 Ø 76 Ø 76

Group

914 · 915 34 915 · 916 34 916 · 917 34 917 · 726 34

Group

791 · 794 14 794 14 834 · 835 72 836 · 837 72

499


Aluminium luminaire poles with base plate · DIN EN 40 Painted surface finish

Luminaire poles with base plate for installation on an anchorage unit or foundation. Corrosion-resistant poles made of aluminium and die cast aluminium with static strength according to DIN EN 40. The luminaire poles are pretreated, powder coated and supplied with a high-quality enamel finish. They are equipped with a die cast aluminium door, C-clamp and sliding nuts to accommodate a connection box and earth conductor connection. Matching connection boxes and anchorage units are given in the table. Technical data, page 507. We supply luminaire poles in the same colour and surface finish as the ordered luminaires. Poles in RAL and DB colours are supplied at the catalogue price. D

Aluminium luminaire poles with base plate · Painted

h

Illustration

Pole Height

D 1

h

D 2

Group 11

790

1000

48

-

48 165

1

1.8

without door

895

997

1000

60

-

60 165

1

4.0

without door

895

793

1500

60

-

60 165

1

5.5

without door

895

992

1700

48

-

48 165

1

3.0

without door

895

994

2000

60

-

60 165

1

7.0

without door

895

Group 12

907

2000

60

90

82 220

1

10.0

A

896

908

2000

60 100 100 220

1

11.0

A

896

722

2500

60

82 220

1

12.0

A

896

930

3000

60 120 120 300

1

18.0

B · C · D

897

732

3500

76 130 135 340

2

22.0

B · C · D

899

729

3500

76

80 135 340

2

22.0

B · C · D

899

733

4000

76 130 135 340

2

25.0

B · C · D

899

728

4000

76

80 135 340

2

25.0

B · C · D

899

731

4000

76 100 170 360

2

49.0

B · C · D

899

734

5000

76 100 170 360

2

56.0

B · C · D

899

Group 13

937

2500

60

- 100 220

1

11.0

A

896

944

3000

76

- 120 300

1

15.0

B · C · D

897

746

3500

76

- 120 300

1

16.5

B · C · D

897

747

4000

76

- 135 340

2

18.0

B · C · D

899

Group 14

985

2500

60

- 115 300

1

12.0

A · B · C

897

986

3000

60

- 115 300

1

14.0

A·B·C

897

788

3000

76

- 135 340

2

15.0

B · C · D

899

786

3500

60

- 135 340

2

16.0

B · C · D

899

789

3500

76

- 135 340

2

16.0

B · C · D

899

787

4000

60

- 135 340

2

17.0

B · C · D

899

791

4000

76

- 135 340

2

17.0

B · C · D

899

792

4500

76

- 135 340

2

19.0

B · C · D

899

794

5000

76

- 135 340

2

21.0

B · C · D

899

Group 15

927

3700

76

- 135 400

1

26.0

B · C · D

898

928

4200

76

- 135 400

1

27.5

B · C · D

898

926

5000

76

- 135 400

1

30.0

B · C · D

898

500

90

1

D3 System

kg Connection box Anch. unit

H

D D

2

3

System 1 A bottom plate is bolted to an anchorage unit or foundation. The luminaire pole with base plate is placed on the bottom plate and connected by lateral stainless steel bolts.

System 2 The luminaire pole with its base plate is bolted directly to the foundation or anchorage unit. When mounted on a foundation, the fixing bolts must be provided by the customer.


Group 11

Group 12

Group 13

Group 14

Group 15

501


Aluminium luminaire poles with anchorage section · DIN EN 40 Painted surface finish

Luminaire poles with anchorage section. Corrosion-resistant poles made of aluminium with static strength according to DIN EN 40. The luminaire poles are pretreated, powder coated and supplied with a high-quality enamel finish. They are equipped with a die cast aluminium door, C-clamp and sliding nuts to accommodate a connection box and earth conductor connection. Matching connection boxes are given in the table. Technical data, page 507. We supply luminaire poles in the same colour and surface finish as the ordered luminaires. Poles in RAL and DB colours are supplied at the catalogue price. Aluminium luminaire poles with anchorage section · Painted

Aluminium luminaire poles with anchorage section · Painted

Illustration

Pole Height

D 1

h

D 2

E

kg

Connection box

Illustration

Pole Height

D 1

Group 31

934

600

48

-

48 400

1.5

without door

Group 33

951

3000

941

1000

60

-

60 400

3.0

without door

956

938

1700

48

-

48 400

3.0

without door

969

943

2000

60

-

60 500

6.0

without door

945

2000

82

-

82 500

7.0

A

954

2500

82

-

82 500

8.0

958

3000 100

957

3000 120

959

3500 100

965

3500 120

960

4000 100

974

4000 120

989

4500 120

- 120 800 22.0

Group 32

740

2000

kg

Connection box

76 120

500 12.0

B·C·D

3500

76 120

600 15.0

B·C·D

4000

76 135

800 17.0

B·C·D

996

4500

76 150

800 25.0

B·C·D

977

5000

76 160 1000 30.0

B·C·D

A

Group 34

910

2500

60 115

500

A·B·C

- 100 500 12.0

A

911

3000

60 115

500 10.0

A·B·C

- 120 500 15.0

B·C·D

918

3000

76 135

600 11.0

B·C·D

- 100 600 15.0

A

912

3500

60 115

600 12.0

A·B·C

- 120 600 18.0

B·C·D

913

3500

76 135

600 13.0

B·C·D

- 100 600 16.0

A

724

4000

60 135

600 14.0

B·C·D

- 120 600 20.0

B·C·D

914

4000

76 135

600 15.0

B·C·D

B·C·D

725

4500

76 135

800 18.0

B·C·D

A

915

5000

76 135

800 19.0

B·C·D

60

90

82 500

7.0

90

82 500

D 2

E

9.0

741

2500

60

9.0

A

916

6000

76 145 1000 27.0

B·C·D

909

3000

82 120 100 500 13.0

A

917

7000

76 145 1200 34.0

B·C·D

726

8000

76 145 1200 56.0

B·C·D

D

1

h

H

D

2

E

906

3500

76 130 135 800 20.0

B·C·D

739

3500

76

80 135 800 20.0

B·C·D

742

4000

76 130 135 800 23.0

B·C·D

738

4000

76

80 135 800 23.0

B·C·D

737

4000

76 100 170 800 33.0

B·C·D

743

4500

76 130 135 800 27.0

B·C·D

736

4500

76

80 135 800 27.0

B·C·D

744

5000

76 130 135 800 31.0

B·C·D

727

5000

76

80 135 800 31.0

B·C·D

Illustration

Pole Height

kg

Connection box

748

5000

76 100 170 1000 38.0

B·C·D

Group 51

990

4300 G ½ 120 800 19.0

B · C · D

for 1 luminaire

749

6000

89 120 220 1000 65.0

B·C·D

991

4300 G ½ 120 800 23.0

B · C · D

for 2 luminaires

750

7000

89 120 220 1000 75.0

B·C·D

993

4300 G ½ 135 800 30.0

B · C · D

for 3 luminaires

502

Aluminium swan-neck poles with anchorage section · Painted D 1

D 2

E


Group 31

Group 32

Group 33

Group 34

Group 51

503


Steel luminaire poles with anchorage section · DIN EN 40 Galvanized · Painted surface finish Galvanized, seamless steel luminaire poles with static strengths according to DIN EN 40. The poles in Group 72 are pretreated, powder coated and supplied with a high-quality enamel finish. They are equipped with a die cast aluminium door, C-clamp and sliding nuts to accommodate a connection box and earth conductor connection. Matching connection boxes are given in the table. Technical data, page 507. We supply luminaire poles in Group 72 in the same colour and surface finish as the ordered luminaires. Poles in RAL and DB colours are supplied at the catalogue price. Luminaire poles made of galvanized steel are also supplied on request in heights 12 000 · 14 000 · 16 000 · 18 000 mm. On request we also produce special pole constructions. Steel poles with anchorage section · Galvanized Illustration

Pole Height

D 1

D 2

E

kg

Connection box

Group 62

800

2500

60 115

800

25.0

A·B·C

801

3000

60 115

800

28.0

A·B·C

811

3000

76 115

800

31.0

A·B·C

802

3500

60 115

800

35.0

A·B·C

815

3500

76 115

800

36.0

A·B·C

803

4000

60 115

800

38.0

A·B·C

804

4000

76 135

800

42.0

B·C·D

817

4500

76 135

800

46.0

B·C·D

805

5000

76 135

800

52.0

B·C·D

806

6000

76 140 1000

68.0

B·C·D

807

7000

76 160 1200

96.0

B·C·D

808

8000

76 170 1200 119.0

B·C·D

809

9000

76 195 1500 151.0

B·C·D

810

10 000

89 195 1500 189.0

B·C·D

D

1

Steel poles with anchorage section · Galvanized and painted Illustration

Pole Height

D 1

D 2

E

kg

Connection box

Group 72

880

2500

60 115

800

25.0

A·B·C

881

3000

60 115

800

28.0

A·B·C

888

3000

76 115

800

31.0

A·B·C

882

3500

60 115

800

35.0

A·B·C

885

3500

76 115

800

36.0

A·B·C

883

4000

60 115

800

38.0

A·B·C

884

4000

76 135

800

42.0

B·C·D

887

4500

76 135

800

46.0

B·C·D

886

5000

76 135

800

52.0

B·C·D

834

6000

76 140 1000

68.0

B·C·D

835

7000

76 160 1200

96.0

B·C·D

836

8000

76 170 1200 119.0

B·C·D

837

9000

76 195 1500 151.0

B·C·D

838

10000

89 195 1500 189.0

B·C·D

504

H

D

2

E

Group 62

Group 72


STAINLESS STEEL luminaire poles with anchorage section · DIN EN 40 cylindrical or tapered

Luminaire poles made of stainless steel with anchorage section. Corrosion-resistant poles made of stainless steel with static strengths according to DIN EN 40. The luminaire poles are equipped with door, C-clamp and sliding bolts to accommodate a connection box and PE connection. Matching connection boxes are given in the table. For technical data, see page 507. To special order, we also supply these poles with a base plate. Other dimensions and heights are available on request.

D

1

h

Stainless steel poles with anchorage section Illustration

Pole

Height

D 1

h

D 2

Group 60

822

1000

60

-

60 400   5,0

E

kg Connection box without door

824

2000

60

-

60 500   9,0

without door

823

2000

60 100

85 500 11,0

A

825

3000

60 110 105 500 20,0

A·B

826

3500

60 110 105 600 24,0

Group 70

872

3000

60

- 115 800 29,0

A·B·C

874

3500

60

- 115 800 34,0

A·B·C

875

3500

76

- 115 800 35,0

A·B·C

876

4000

60

- 115 800 37,0

A·B·C

877

4000

76

- 135 800 43,0

B·C·D

H

A·B

D

2

E

Group 60

Group 70

505


Installation housings with • sockets or • switches 160

for installation in BEGA luminaire poles or garden luminaires and bollards with ≥ 82 mm oder • diameter • cross-section ≥ 80 x 80 mm Protection class IP 44 Installation housings made of die cast aluminium and stainless steel Cover made of glass-fibre reinforced plastic · Colour graphite Installation in luminaire poles is prepared at the factory but must be carried out by the customer due to the risk of damage during transportation. Installation in garden luminaires and bollards is carried out at the factory.

161 · 162

We supply installation housings in the same colour as the ordered luminaires or poles either in graphite, white or silver. graphite – article number white – article number + W silver – article number + A The illustrations show the installation housings when open.

163 ø 72 80 x 110

164 · 165

506

160 166 167 168 161 162 163 164 165 180

Install. housing with safety socket outlet G Install. housing with safety socket outlet B/F Install. housing with safety socket outlet GB Install. housing with safety socket outlet US Installation housing with ON/OFF switch ON/OFF Installation housing with NOC push switch NOC Installation housing with control switch ON/OFF Installation housing with key-operated switch ON/OFF Installation housing with key-operated switch pushbutton Key cylinder for 164 + 165

16 A · 250 Vy 16 A · 250 Vy  13 A · 250 Vy  20 A · 125 Vy  10 A · 250 Vy 10 A · 250 Vy 10 A · 250 Vy 10 A · 250 Vy 10 A · 250 Vy 3 keys assorted


Anchorage units for fixing luminaires and luminaire poles with a base plate in the ground. The welded construction made of galvanized steel comprises a bottom plate, tube and flange plate with threaded bushes made of stainless steel. Stainless steel bolts are also supplied with the anchorage unit to connect the luminaires or luminaire poles to the anchorage unit. Information on matching anchorage units is given in the table for the respective luminaires or poles.

A

C

Bolts

A

B

C

894 895

Anchorage Anchorage

3 x 120° M   6 3 x 120° M   8

95 130

400 400

330 330

896 897 898 899

Anchorage Anchorage Anchorage Anchorage

3 x 120° 4 x   90° 4 x   90° 4 x   90°

165 230 310 340

500 600 800 800

350 450 450 450

M M M M

8 10 12 16

B

Connection boxes for installation in bollards or luminaire poles. Housings are made of impact-resistant plastic. The connection boxes meet the requirements of DIN 43 628/VDE 0660 · Part 505. Information on the matching type of anchorage unit is given in the table for the respective luminaire or pole Type

Pole Ø / D2

Fuses

Inputs

Outputs

Prot. class

A

B

A

623 632

≥   60mm ≥   82mm

1 Fine 6.3 A 1 Neozed 16 A

2 · 3 x 2.59 2 · 5 x   69

1 · 3 x 1.59 1 · 3 x 1.59

IP 55 IP 55

45 55

160 160

B

629

≥ 110 mm

2 Neozed 16 A

3 · 5 x 109

2 · 3 x 1.59

IP 54

65

240

C

644

≥ 110 mm

2 Neozed 16 A

2 · 5 x 169

2 · 3 x 2.59

IP 44

70

230

D

647 650

≥ 120 mm ≥ 120 mm

3 Neozed 16 A 6 Fine 10 A

3 · 5 x 169 2 · 5 x   49

2 · 5 x 2.59 6 · 3 x 1.59

IP 54 IP 54

80 80

255 255

B

A

507


Accessories for BEGA floodlights with G ½ mounting bush Accessories for portable or permanent operation of BEGA floodlights with G ½ · DIN ISO 228 mounting bush. The floodlights on pages 258 - 265 and 274 - 281 of this catalogue can be bolted to the accessories shown on this double page to meet the requirements of diverse applications. We supply accessories in the same colour as the ordered luminaires or poles, either in graphite, white or silver. graphite – article number white – article number + W silver – article number + A Earth spike 204 · Colour graphite

Earth spike

A

Glass-fibre reinforced plastic · Colour graphite 5 m connecting cable with safety plug A

204

Earth spike with G ½ mounting bush

390

55

Screw clamp Die cast aluminium and glass-fibre reinforced plastic 5 m connecting cable with safety plug

A

A

283

Screw clamp with G ½ mounting bush

200

Tube clamp 82

A

Die cast aluminium and stainless steel 5 m connecting cable with safety plug A

280

Tube clamp with G ½ mounting bush

140

Wood screw A

Stainless steel 5 m connecting cable with safety plug A

252

508

Wood screw with G ½ mounting bush

80


Mounting box · Rectangular for installation of a floodlight on pillars, walls or under ceilings Protection class IP 65 Die cast aluminium and stainless steel 2 cable entries 3 x 2.59 connecting terminal A

245

Mounting box with G ½ mounting bush

B

B

C

60 125 55 A

C

Mounting boxes · Round for installation of a floodlight on pillars, walls or under ceilings Protection class IP 65 Die cast aluminium and stainless steel 2 cable entries 3 x 2.59 connecting terminal 217 294 284

Mounting box with G ½ mounting bush Mounting box with G ½ mounting bush Mounting box with G ½ mounting bush

A

B

Ø  110

45 50 55

Ø 130 Ø 150

B

A

Mounting box for foundation or anchorage unit for installation of a floodlight on a foundation or anchorage unit 894 Protection class IP 65 Die cast aluminium and stainless steel 2 cable entries for connecting cable  Ø 9 -15 mm 3 x 49 connecting terminal Anchorage units are accessories and must be ordered separately. Technical data of anchorage units, page 507 221 894

Mounting box with G ½ mounting bush Anchorage unit for mounting box 221

A

B

Ø  130

80

B

A

Pole caps for luminaire poles for installation of a floodlight on a luminaire pole Die cast aluminium and stainless steel Pole top

214 248 249 229

Pole Pole Pole Pole

cap cap cap cap

with with with with

G ½ G ½ G ½ G ½

mounting mounting mounting mounting

bush bush bush bush

A

Ø 48

60 Ø 60 90 Ø 76 105 Ø 82 110

A

Outrigger arm for installation of a floodlight on a luminaire pole Ø ≥ 60 mm or walls Die cast aluminium, aluminium and stainless steel 3 x 2.59 connecting terminal 379

Outrigger arm with G ½ mounting bush

A

B

190

80

B

A

509


Accessories for BEGA power floodlights with bracket with 1 central hole Ø 22 mm and 2 holes Ø 9 mm · Spacing 80 mm Accessories for permanent operation of BEGA power floodlights. The floodlights on pages 266 - 271 and 282 - 285 of this catalogue can be bolted to the accessories shown on this double page to meet the requirements of diverse applications. We supply the accessories in the same colour as the ordered luminaires or poles, either in graphite or silver. graphite – article number silver – article number + A

Pole caps for installation of a floodlight on a luminaire pole Die cast aluminium and stainless steel 1 cable entry

A

Pole top

341 342 343

Pole cap Pole cap Pole cap

Ø 60 Ø 76 Ø 89

Insert depth

150   150   150

A

175 175 175

Pole caps for installation of 1 or 2 outrigger arms 391 · 498 on a luminaire pole Protection class IP 44 Die cast aluminium, aluminium and stainless steel 3 x 2.59 connecting terminals

A

Pole top

386 387 388

Pole cap for 1 or 2 outrigger arms Pole cap for 1 or 2 outrigger arms Pole cap for 1 or 2 outrigger arms

Ø 60 Ø 76 Ø 89

Insert depth

120   120   120

A

320 340 340

Outrigger arms with or without discharge unit

B

for installation of a floodlight on a luminaire pole Ø ≥ 76 mm, pole caps 386 · 387 · 388 or walls Protection class IP 44 Die cast aluminium, aluminium and stainless steel Anschlußklemmen 3 x 2.59 1 Leitungsverschraubung A

A

391 498

510

Outrigger arm without discharge unit Outrigger arm w/ disch. unit for HST 600 W

B

280 165 280 165


Mounting box for installation of a floodlight on pillars, walls, foundations or under ceilings Protection class IP 55 Die cast aluminium and stainless steel 2 cable entries · 5 x 49 connecting terminals 348

Mounting box

A

B

Ø  180

80

B

A

Mounting base for accommodation of a branch box for installation of a floodlight on pillars, walls, foundations or anchorage unit 895 Die cast aluminium and stainless steel Galvanized steel mounting plate Anchorage units are accessories and must be ordered separately. Technical data of anchorage units, page 507 A

208 895

Mounting base Anchorage unit for mounting base 208

B B

Ø  200 120

A

Mounting box for foundation or anchorage unit for installation of a floodlight on a foundation or anchorage units 895 or 896 Protection class IP 65 Die cast aluminium and stainless steel 2 cable entries for connecting cable Ø 9 -15 mm 3 x 49 connecting terminal Anchorage units are accessories and must be ordered separately. Technical data of anchorage units, page 507 A

225 895 896

Mounting box Anchorage unit for mounting box 225 Anchorage unit for mounting box 225

B

B

Ø  180 110 A

Control gear boxes with discharge units for floodlights with discharge lamps Protection class IP 54 Die cast aluminium and stainless steel 2 cable entries · 49 connecting terminals 414 212 207 202

Contr. Contr. Contr. Contr.

gear gear gear gear

box box box box

for for for for

HI / HS 250 W HST 600 W HIT 1000 W HIT 400 V · 2000 W

A

B

240 x 180 240 x 180 360 x 260 360 x 260

150 160 210 210

B

A

511


Multiple pole tops for multiple configuration of floodlights on the BEGA steel poles given on page 504. Multiple pole tops ready for installation for 2, 3, 4 or 6 floodlights. Sextuple pole top 766 is however only suitable for floodlights up to Ø 350 mm on a standard pole. A reinforced steel pole is required for floodlights of Ø 460 mm, and this is available to special order. Shields cannot be used for static reasons. Matching connection boxes are given on page 507. All important technical data are given in the instructions for use for these multiple pole tops. Die cast aluminium, aluminium and stainless steel Colour graphite or silver graphite – article number silver – article number + A

B

A

Pole top

762 763 764 766

512

Pole Pole Pole Pole

top top top top

for for for for

2 3 4 6

floodlights floodlights floodlights floodlights

Ø 76 Ø 76 Ø 76 Ø 76

Insert depth

150 150 150 150

A

B

565 1765 1165 1765

195 195 195 195


Cross beams for multiple configuration of the floodlights on pages 266 - 271. Cross beams can be mounted on walls, support structures and under ceilings. When installed on the ground, they can either be mounted on a foundation or anchorage unit. Matching anchorage units are given in the table. Anchorage units are accessories and must be ordered separately. For technical data of anchorage units, see page 507 The individual fasteners of the floodlights can be rotated in steps of 90°. They are supplied with a connection box made of die cast aluminium. All important technical data are given in the instructions for use for these cross beams. Die cast aluminium, aluminium and stainless steel Colour graphite or silver graphite – article number silver – article number + A

C B A

A

761 765 896

Cross beam for 3 floodlights Cross beam for 6 floodlights Anchorage unit for 761 · 765

B

C

1510 300 960 1510 300 960

513


Power supply unit for LED luminaires 24 V DC Safety transformer according to DIN EN 61558/VDE 0570 Part 2- 6 230 Vy 50-60 Hz/24 V DC Encapsuled in cast resin · Safety class II 2 · Protection class IP 65 BEGA power supply units are also suitable for the operation of several LED luminaires. In this case, the maximum wattage of the power supply unit must not be exceeded.

B

C

A

465

Wattage

PSU for LED luminaires 24 V DC

A

0 - 20 W

B

C

55 215

50

B

C

A

169

Wattage

PSU for LED luminaires 24 V DC

A

0 - 150 W

B

C

180 175 110

Transformer for swimming pool luminaires and underwater floodlights 12 V Safety transformer according to EN 61558/VDE 0570 Part 2 - 6 Encapsuled in cast resin · Safety class II 2 · Protection clas IP 65 When selecting a transformer, the connected load must not exceed the wattage specified in VA. The connected load is derived from the type, number of luminaires, and power loss. Transformers should only be operated outside the water.

B

C

A

427 478

Wattage

Transformer 230/11.5 V Transformer 230/11.5 V

A

·   50 VA · 105 VA

B

C

55 155 55 215

50 50

B

C

A

479 484 488 497

Transformer Transformer Transformer Transformer

230/11.5 230/11.5 230/11.5 230/11.5

V V V V

· · · ·

Wattage

Secondary

A

200  300  400  600

2 x 100 VA

135 135 180 180

VA VA VA VA

1 x 300 VA 2 x 200 VA 2 x 300 VA

B

C

125 90 140 90 155 110 175 110

Junction box for installation in floors or walls Protection class IP 67 · Safety class III 3 Stainless steel · steel grade no. 1.4301 · Electropolished 4 cable glands 1 hose connector for soft PVC safety hose Ø 28 x 3,5 mm After installation, the junction box must be sealed with sealing compound!

A

223

514

B

Junction box

A

B

120 120 x 120

95


Colour light control for freely programmable sequences Freely programmable sequencer for DALI electronic ballasts and DALI control units. Using easy-to-operate PC software, over 200 individual scenes, as well as fade down, fade up and dwell times can be programmed through an USB interface. Sequencer for installation in switching cabinets with USB cable and software. Outputs for a maximum of 25 control units or electronic ballasts. 243

Colour light control for freely programmable sequences

Colour light control with fixed sequence Colour change sequencer for DALI electronic ballasts and DALI control units with fixed sequence and cross-fading as infinite loop Protection class IP 65 with control input 1...10 V · 0.1 mA or potentiometer 100 KΩ linear for changing the execution speed of the sequence. Outputs for a maximum of 4 control units or electronic ballasts. C A B

A

244

Colour light control with fixed sequence

B

C

240 135 70

DALI control unit for RGB swimming pool luminaires 230 V~

230 V~

230 V~

230 V~ PSU 169 PSU 16924 V DC 2 24 V DC

Colour light control 243 or 244 Colour light control

6

DALI control 2 unit

6

184 DALI control unit

243 or 244

DALI control unit without power supply unit for RGB swimming pool luminaires Protection class IP 65 · Safety class III 3 For a maximum of 4 swimming pool luminaires 8934 or 8943. To operate, power supply unit 169 is also required, and colour light control 243 or 244 for colour mix. Control units and power supply unit may only be operated outside the water. C A

184 4

B

4 RGB luminaire 8934 or 8943 RGB luminaire

A

184

DALI control unit for RGB swimming pool luminaires

B

C

310 215

65

8934 or 8943

Controllable power supply unit for LED luminaires RGB 24 V DC

230 V~

230 V~

230 V~

230 V~

Colour light control

6

Controllable PSU

243 or 244 Colour light control

6

445 Controllable PSU

243 or 244

DALI control unit with power supply unit 230 Vy 0/50/60 Hz for LED luminaires RGB 24 V DC. Protection class I 1  For a maximum of 15 luminaires 3291 / 8897 or 6 luminaires 3292 / 8898. To mix colours, colour light control 243 or 244 is also required. Please note: Controllable power supply unit 445 is not suitable to operate RGB swimming pool luminaires C

4454

A

4 RGB LED luminaire 3291 / 8897 or LED luminaire RGB 3292 / 8898 3291 / 8897 or 3292 / 8898

B

A

445

Controllable power supply unit for LED luminaires RGB 24 V DC

B

C

310 215

65

515


Corner blocks for corner-mounting luminaires on buildings. Corresponding indications are given on the relevant pages of the catalogue. Die cast aluminium and stainless steel Colour graphite, white or silver graphite – article number white – article number + W silver – article number + A

A

B

408 409 410 412 413

Corner Corner Corner Corner Corner

block block block block block

A

B

Ø    90

50 60 70 80 95

Ø  110 Ø  130 Ø  150 Ø  170

Cable hanger for side-mounted lum. with G ½ · DIN ISO 228 mounting bush Protection class IP 54 Die cast aluminium and stainless steel 2 cable entries 4 x 2.59 connecting terminals Suitable for cords with Ø 5 -12 mm Adjustable up to ± 10° off level Colour graphite

B

A A

C

516

477

Cable hanger

B

C

160 180

50


Technical information

www.bega.com

The technical data of the products in this catalogue are subject to alterations due to new developments and technical progress. Instructions for use are available for all the luminaires and accessories. They include lighting data, important references and installation dimensions as well as all technical information on each product. Instructions for use are supplied in each package. The BEGA web site www.bega.com gives you information on: • all BEGA luminaires and accessories • instructions for use in PDF format • tender texts Calculation programs • DIALux for outdoor lighting, street lighting and indoor lighting • Luminaire data for DIALux • Luminaire data in EULUMDAT and IES format

517


Lighting technology · Principles · Planning

Solving lighting tasks requires good planning work. The BEGA catalogue contains a great deal of important information e.g. on light distribution curves, floodlight and isolux diagrams. We explain the basic know-how required on this page. Technical luminaire data and calculation programs are also available on our web site at www.bega.com. The BEGA lighting technology department will design lighting systems to your specifications. Our suggestions fulfil the required purpose and also consider requirements of design.

8048

cd/klm

8588

ß = 27°/ 81°

cd/klm

8487

ß = 15°/76°

lx

8487

1 HIT 250 W

400

1000

E

1600

9858

8

1 HME 80 W 1 HSE-E 70 W x 1,63 H = 4,0 m

6

320

4

240

0

160

4

80

8

4

500 240 cd/klm C 180 - C 0 C 195 - C 15 C 270 - C 90

518

2

800

16

0

30°

60°

30°

30°

60°

60°

30°

30°

60°

2

6

10

14

18

Light distribution curves indicate the direction and intensity with which a luminaire emits light. The luminous intensity in candela (cd) for a given wattage is derived by multiplying the value in cd/klm read from the diagram by the total luminous flux in kilolumen (klm) of the lamps used in the luminaire. Light distribution is mostly represented in polar coordinates - top left -.

Lighting diagrams for floodlights - top right - show the dimensions of the surface defined by the two half beam angles - top left - and the average illuminance on that surface. The following can be read off in relation to the distance from the floodlight to - surface - horizontal axis: • height - solid line  C 0 – C 180 ß = 15° and width - broken line  C 270 – C 90 ß = 76° of the limited surface to the vertical axis on the right. • average illuminance - parabola - in lx on the vertical axis on the left.

For floodlights, we quote light distribution in Cartesian coordinates - top right -. The half beam angles in the diagrams are also indicated by C 0 – C 180 - solid line ß = 27° and C 90 – C 270 - broken line ß = 81°. The luminous intensity values are entered on the vertical axis and the light emission angles horizontally. The polar diagrams indicate to which C-planes the curves relate.

Example: At a distance of 16 m, the half beam angles of floodlight 8487 define a surface of 4 m in height and 18 m in width. Average illuminance on this surface is 80 lx. Uniform illumination is achieved when the distances between the floodlights correspond to the width defined by the half beam angles. When illuminating a façade from the ground upwards, only about 1/3 of the given illuminance is achieved.

m

m

0

2

8

4

6

4

2

8

10

1

12

0,5

14

0,3

16

0,2 lx

18

20

Isolux diagrams - example given above - indicate the distribution of illuminance on a visible surface. Points with the same illuminance are joined by curves - isolux lines . The luminaire is located perpendicular to the plane showing a mounting height (h) above the coordinate data. Depending on the type of luminaire, the mounting height (h) or the corresponding pole height (H) is given. The light source spacing is approximately twice the distance of the isolux line which belongs to the half value representing the required minimum illuminance.

Example: In the isolux diagram shown here, the 0.5 lx line is lateral at a distance of 14 -16 m from the coordinate origin. If a footpath is to be illuminated - Emin ≤ 1 lx -, light source spacing of approx. 28 m must be selected. The isolux lines of luminaires with rotationally symmetrical light distribution are concentric circles.


Lighting technology · Guidelines

Our lighting information and light planning is based, apart from our own experience, on the following reference works: • Handbook of Lighting • Road Research Group Directives for the Illumination of Pedestrian Areas • EN 13201 - street lighting • DIN 67528 - car parks • EN 12464 -1, -2 - illumination of workplaces (multi-storey car parks) • EN 12193 - sports facilities • EN 1838 - emergency lighting

Pedestrian areas

Sports facilities · EN 12193

Fac. for vehicles · EN 12464 · DIN 67528

Recommendations by the Road Research Group

The lighting of sports grounds, sports halls and swimming pools should provide optimum conditions for sportsmen and women, spectators and judges. Colour rendering is recommended according to level 3-4 for training and 1-2 for competitions. For sports halls, we recommend twinlamp luminaires with the possibility of reversing switching for training and competitions. Additional requirements apply to facilities which are suitable for TV recording.

Illumination of parking spaces DIN 67528

New urban planning concepts for pedestrian areas and residential courtyards focus on human factors. Public areas should promote communication and e.g. allow events to be staged. The selection and arrangement of the right luminaires are fundamental design features of such areas. Luminaires should be adequately shielded and illuminate adjacent façades with 1- 4 lx, facilitating orientation and increasing safety.

Exterior areas Pedestrian zones Pedestrian bridges Squares Level footpaths Footpaths with steps Outside steps

q · lx

g2 Emin

5 – 10 – – 15

0.08 – 0.10 – 0.10 – – ≥ 1 lx – ≥ 5 lx 0.30

q · lx Emin/Eav

Football grounds Indoor/Outdoor pools Outdoor ice hockey Indoor ice hockey Riding arenas Indoor riding arenas

75 200 200 300 100 200

0.50 0.50 0.50 0.70 0.50 0.50

500 500 300 500 300

0.70 0.70 0.70 0.70 0.60

Class II

Interior areas Arcades, passageways 15 50 Shopping malls 60 Subways Underground stations 120 120 Inside steps

Class III

0.10 0.10 0.33 0.30 0.30

– – – – –

Gymnasiums, sports halls Tennis halls Swimming, water polo Indoor ice hockey Indoor riding arenas

En* En g1 Ezh Standard values Entrance/Exit 15 lx 7 lx - 1 lx Movement areas 15 lx 7 lx 0.2 1 lx 15 lx 7 lx 0.2 1 lx Parking areas En* = for areas with high traffic density Suppression of the luminance γ Lum. intensity I max Angle of beam 90° 50 cd/Klm 80° 100 cd/Klm

Lighting of car park buildings EN 12464 Standard values Em by day 300 lx Entrance/Exit by night Entrance/Exit   75 lx Roads   75 lx Parking areas   75 lx 300 lx Switches

UGRL

Ra

25

20

25 25 – 19

20 20 20 80

519


Electrical safety

The luminaires in this catalogue are designed and built on the basis of the EN 60598/VDE 0711 international regulations. The majority of the luminaires bear corresponding test symbols on the type plate, packaging and instructions for use. The remaining luminaires have been prepared for testing but the test and approval procedure has not yet been completed. Due to the long period of validity of this catalogue, we are unable to specify here the current status of symbol approval. However, we can provide information on the status of symbol approval at any time. Special orders are supplied in accordance with the relevant specifications. All luminaires are subject to constant in-process monitoring and quality control. Safety symbols

r h hh

The ENEC symbol (European Norms Electrical Certification) is a European test and certification symbol for luminaires and electrical components in luminaires. The number 10 with or without the VDE symbol signifies that the test/certification symbol was awarded by the VDE Institute for Testing and Certification.

Luminaires with this symbol can be fixed to normal flame-inhibiting materials (EN 60598/VDE 0711).

Luminaires bearing this symbol are suitable for business premises where dust or fibrous material present a fire hazard due to their limited surface temperatures (VDE 0710 Part 5).

Luminaires with this symbol can be installed in or on normal flame-inhibiting surfaces where thermal insulation material may cover the luminaire.

Luminaires bearing this symbol must not be in direct contact with insulating material.

p

Luminaires bearing the ball symbol are suitable for use in sports facilities. They fulfil the test requirements of VDE 0710 Part 13.

ta

Luminaires with this symbol are designed in accordance with EN 60598/VDE 0711 for an ambient temperature of ta 25°C (inside and outside). Luminaires with ta 15°C on the type plate are only suitable for use outside.

c

520

The CE symbol is affixed at the manufacturer’s responsibility and is not a safety symbol. The manufacturer uses it to document conformity with European Union directives.


Protection classes · Safety classes

The information we provide on a luminaire’s stability in withstanding the penetration of dust, solid bodies and water is according to EN 60598/VDE 0711. The respective degree of protection IP (International Protection) is printed on the luminaire as a number system according to IEC 529. Please see the table on this page for allocation of the degree of protection according to EN 60598.

Protection classes

1st digit: foreign body protection

5 6

IP 1X

protection against penetration of foreign bodies ≥

50 mm

IP 2X

protection against penetration of foreign bodies ≥

12 mm

IP 3X

protection against penetration of foreign bodies ≥ 2.5 mm

IP 4X

protection against penetration of foreign bodies ≥

IP 5X

protection against harmful dust deposits

IP 6X

protection against dust entry

1 mm

2nd digit: water protection

7 8 4 44 77..m

IP X1

protection against drops of water falling vertically

IP X2

protection against drops of water from angles up to 15°

IP X3

protection against showers up to 60°

IP X4

protection against splash water

IP X5

protection against water jets

IP X6

protection against heavy downpours

IP X7

protection against temporary immersion

IP X8

protection against permanent submersion

Safety classes

1 2

Safety class I designates luminaires with a protective earth conductor. Under fault conditions, the power supply is cut by an overload.

3

Safety class III designates luminaires operating on extra-low safety voltage. They can only be connected to safety transformers in accordance with EN 61558/VDE 0570, EN 61347/VDE 712 or VDE 0100 Part 410.

Safety class II designates luminaires that, apart from functional insulation, have an additional protective insulation. Under fault conditions, no dangerous voltage can reach metal parts which can be touched. Many luminaires are available in Safety class I and also in Safety class II. Please inquire accordingly.

The transformer must be approved for this type of installation.

521


Lamp table

Symbol LBS

Wattage Lampholder P (W)

General service lamps A 60 A 60 A 60 A 60 A 65

Lamps are subject to constant technical development and improvement. Therefore we expressly advise you to consult the latest technical data sheets issued by the lamp manufacturers. This applies in particular to data relating to the burning position, operating current and starting characteristics of the lamps. The contents of this lamp table were provided by the lamp manufacturers. We assume no liability for its completeness and validity.

Lumen Φ (lm) Lum. intensity I (cd)

Osram

Philips

GE

40 W 60 W 75 W 100 W 150 W

E 27 E 27 E 27 E 27 E 27

415 lm 710 lm 935 lm 1340 lm 2 160 lm

CLAS A FR   40 CLAS A FR   60 CLAS A FR   75 CLAS A FR 100 CLAS A FR 150

354686 354716 354747 354778 090492

21671 21673 21675 21677 22568

Drop lamps

D 45 D 45 D 45

25 W 40 W 60 W

E 14 E 14 E 14

200 lm 400 lm 660 lm

CLAS P FR 25 CLAS P FR 40 CLAS P FR 60

011947 011978 067579

19787 19789 19793

Candle lamps

C 35

40 W

E 14

400 lm

CLAS B FR 40

011336

91323

15 W 25 W

E 14 E 14

110 lm 190 lm

SPC T 26/57 FR 15 SPC T 26/57 FR 25

058393 042477

92047 92048

120 W 120 W 300 W 300 W 300 W

E 27 E 27 GX 16d GX 16d GX 16d

9 300 cd 3 100 cd 40 000 cd 22 000 cd 9 000 cd

PAR 38/SP PAR 38/FL — — —

380715 380616 159571 159618 159656

91576 91573 — — —

40 W 60 W 60 W 75 W 100 W 150 W 250 W 25 W 40 W 60 W 75 W 40 W 60 W 60 W 75 W 100 W 150 W 250 W 60 W 100 W 150 W 300 W 500 W 1000 W

B 15d B 15d B 15d B 15d B 15d B 15d B 15d G 9 G 9 G 9 G 9 E 14 E 14 E 27 E 27 E 27 E 27 E 27 R7s R7s R7s R7s R7s R7s

460 lm 790 lm 790 lm 1050 lm 1470 lm 2400 lm 4210 lm 230 lm 460 lm 790 lm 1050 lm 460 lm 790 lm 790 lm 1050 lm 1470 lm 2 400 lm 4 210 lm 840 lm 1600 lm 2 500 lm 5 300 lm 9 500 lm 22 000 lm

64467/AM 64481/AM 64469/AM 64473/AM 64475/AM 64471/AM 64479/AM 66625/AM 66640/AM 66660/AM 66675/AM 64861 T/ TIM 64862 T/ TIM 64472/IM 64474/IM 64476/IM 64478/IM 64480/IM 64688 64690 64695 64701 64702 64740

— — — 179630 179654 179616 — 429544 429605 429667 — — — 506634 — 506689 506719 — 494726 058331 058348 494382 494399 494344

— –– –– — — — — — 22507 10817 10820 — — — — — — — — 91427 91428 91436 29165 29180

5 W 10 W 10 W 20 W 35 W 50 W 75 W

G 4 G 4 G 4 G 4 GY 6,35 GY 6,35 GY 6,35

60 lm 130 lm 130 lm 320 lm 600 lm 910 lm 1450 lm

64405 S 64415 F 64415 S 64425 S 64432 S 64440 S 64450 S

409690 — 409706 402103 402189 402172 402165

42959 — 35705 35710 35699 35700 35701

Low voltage reflector lamps QR-CBC 51 · 10° 20 W QR-CBC 51 · 38° 20 W QR-CBC 51 · 10° 35 W QR-CBC 51 · 38° 35 W 25 W PAR 36 · 26°/37° PAR 36 · 28°/37° 50 W PAR 56 · 10°/35° 300 W

GU 5,3 GU 5,3 GU 5,3 GU 5,3 Cabel Cabel Cabel

5 000 cd 780 cd 9100 cd 1500 cd 500 cd 1300 cd 6 000 lm

46860 SP 46860 WFL 46865 SP 46865 WFL — — —

424549 424846 424907 425041 — — 159694

20858 20857 20864 20859 25 PAR 36 WFL 12V 50 PAR 36 WFL 12V 300 PAR 56 WFL 12V

14 W 21 W 28 W 35 W 24 W 39 W 54 W 80 W 18 W 36 W 58 W

G 5 G 5 G 5 G 5 G 5 G 5 G 5 G 5 G 13 G 13 G 13

1200 lm 1900 lm 2600 lm 3300 lm 1750 lm 3100 lm 4450 lm 6150 lm 1350 lm 3 350 lm 5 200 lm

Lumilux T5 HE FH 14 W Lumilux T5 HE FH 21 W Lumilux T5 HE FH 28 W Lumilux T5 HE FH 35 W Lumilux T5 HO FQ 24 W Lumilux T5 HO FQ 39 W Lumilux T5 HO FQ 54 W Lumilux T5 HO FQ 80 W Lumilux T8 L 18 W Lumilux T8 L 36 W Lumilux T8 L 58 W

Master TL5 HE 14 W Master TL5 HE 21 W Master TL5 HE 28 W Master TL5 HE 35 W Master TL5 HO 24 W Master TL5 HO 39 W Master TL5 HO 54 W Master TL5 HO 80 W Master TL-D 18 W Master TL-D 36 W Master TL-D 58 W

F 14 W/T5 F 21 W/T5 F 28 W/T5 F 35 W/T5 F 24 W/T5 F 39 W/T5 F 54 W/T5 F 80 W/T5 F 18 W/ T8 F 36 W/ T8 F 58 W/ T8

40 W

G 10q

2 800 lm

L 40/... C

TL-E 40 W/...

FC 16 T9/...

Pear-shaped lamps · Tubular lamps CO 26 CO 26 Reflector lamps

PAR 38 · 12° PAR 38 · 30° PAR 56 ·   9°/15° PAR 56 · 11°/25° PAR 56 · 16°/40°

Tungsten halogen lamps QT 18 * QT 18 * QT 18 ** QT 18 ** QT 18 ** QT 18 ** QT 18 *** QT 14 QT 14 QT 14 QT 14 QT 26 QT 26 QT 32 QT 32 QT 32 QT 32 QT 32 QT-DE 12 QT-DE 12 QT-DE 12 QT-DE 12 QT-DE 12 QT-DE 12 Low voltage tungsten halogen lamps QT 9-ax QT 9-tr QT 9-ax QT 9-ax QT 12-ax QT 12-ax QT 12-ax

Fluorescent lamps

T 16 T 16 T 16 T 16 T 16 T 16 T 16 T 16 T 26 T 26 T 26

Circular fluorescent lamps

522

T 32-R

* = lamp length 67 mm

** = lamp length 86 mm

*** = lamp length 98 mm


Symbol LBS Compact fluorescent lamps TC-F TC-S TC-S TC-S TC-S TC-D TC-D TC-D TC-D TC-T TC-T TC-T TC-TEL TC-TEL TC-TEL TC-TEL TC-TEL TC-TEL TC-TEL TC-TEL TC-L TC-L TC-L TC-L TC-L

Wattage Lampholder P(W)

Lumen Φ (lm) Lum. intensity I (cd)

Osram

Philips

GE

18 W 5 W 7 W 9 W 11 W 10 W 13 W 18 W 26 W 13 W 18 W 26 W 13 W 18 W 26 W 32 W 42 W 57 W 60 W 85 W 18 W 24 W 36 W 55 W 80 W

2G10 G 23 G 23 G 23 G 23 G 24 d-1 G 24 d-1 G 24 d-2 G 24 d-3 GX 24 d-1 GX 24 d-2 GX 24 d-3 GX 24 q-1 GX 24 q-2 GX 24 q-3 GX 24 q-3 GX 24 q-4 GX 24 q-5 2 G 8 2 G 8 2 G 11 2 G 11 2 G 11 2 G 11 2 G 11

1100 lm 250 lm 400 lm 600 lm 900 lm 600 lm 900 lm 1200 lm 1800 lm 900 lm 1200 lm 1800 lm 850 lm 1150 lm 1750 lm 2400 lm 3200 lm 4300 lm 4000 lm 6000 lm 1200 lm 1800 lm 2900 lm 4800 lm 6000 lm

Dulux F 18 W Dulux S   5 W Dulux S   7 W Dulux S   9 W Dulux S 11 W Dulux D 10 W Dulux D 13 W Dulux D 18 W Dulux D 26 W Dulux T 13 W Dulux T 18 W Dulux T 26 W Dulux T/E 13 W Dulux T/E 18 W Dulux T/E 26 W IN Dulux T/E 32 W IN Dulux T/E 42 W IN Dulux T/E 57 W IN — — Dulux L 18 W Dulux L 24 W Dulux L 36 W Dulux L 55 W Dulux L 80 W

__ PL-S   5 W PL-S   7 W PL-S   9 W PL-S 11 W PL-C 10 W PL-C 13 W PL-C 18 W PL-C 26 W PL-T 13 W PL-T 18 W PL-T 26 W PL-T 13 W/4p PL-T TOP 18 W/4p PL-T TOP 26 W/4p PL-T TOP 32 W/4p PL-T TOP 42 W/4p PL-T TOP 57 W/4p PL-H 60 W/4p PL-H 85 W/4p PL-L 18 W/4p PL-L 24 W/4p PL-L 36 W/4p PL-L 55 W/4p PL-L 80 W/4p

___ F5BX/... F7BX/... F9BX/... F11BX/... F10DBX/... F13DBX/... F18DBX/... F26DBX/... F13TBX/... F18TBX/... F26TBX/... F13TBX/... 4p F18TBX/... 4p F26TBX/... 4p F32TBX/... 4p F42TBX/... 4p — — — F18BX/... F24BX/... F36BX/... F55BX/... —

Compact fluorescent lamps with electronic ballast TCA-SE 7/9 W TCA-SE 10/12 W TCA-SE 15/16 W TC-TSE 15 W TC-DSE 7/8 W TC-DSE 11 W

E 27 E 27 E 27 E 27 E 27 E 27

350/420 lm 500/630 lm 800/900 lm 900 lm 400 lm 600 lm

Dulux EL CLA   7 W Dulux EL CLA 10 W Dulux EL CLA 15 W Dulux EL LL 15 W Dulux EL LL   7 W Dulux EL LL 11 W

Ambiance Pro   9 W Ambiance Pro 12 W Ambiance Pro 16 W Master PL E 15 W Master PL E   8 W Master PL E 11 W

— — — 92259 — —

Mercury vapour lamps HME HME HME HME HME

50 W 80 W 125 W 250 W 400 W

E 27 E 27 E 27 E 40 E 40

2000 lm 4000 lm 6800 lm 14000 lm 24000 lm

HQL   50 de Luxe HQL   80 de Luxe HQL 125 de Luxe HQL 250 de Luxe HQL 400 de Luxe

HPL-Comf.   50 W HPL-Comf.   80 W HPL-Comf. 125 W HPL-Comf. 250 W HPL-Comf. 400 W

H   50 NDX/27 H   80 NDX/27 H 125 NDX/27 H 250 NDX/40 H 400 NDX/40

20 W 20 W 35 W 70 W 35 W 70 W 150 W 250 W 70 W 150 W 250 W 400 W 1000 W 2000 W 70 W 100 W 150 W 70 W 100 W 150 W 250 W 400 W 70 W 100 W 150 W 250 W 400 W

GU 6,5 G 8,5 G 8,5 G 8,5 G 12 G 12 G 12 G 22 RX7s RX7s Fc 2 Fc 2 Cable Cable E 27 E 40 E 40 E 27 E 27 E 27 E 40 E 40 E 27 E 40 E 40 E 40 E 40

1700 lm 1700 lm 3400 lm 6900 lm 3400 lm 7000 lm 15500 lm 26000 lm 6900 lm 14800 lm 25000 lm 36000 lm 90000 lm 200000 lm 5900 lm 8300 lm 13500 lm 6400 (6500) lm 8600 (9000) lm 13300 (14000) lm 19000 lm 30000 lm 7000 lm 8800 lm 14500 lm 20000 lm 32000 lm

HCI-TF 20 W HCI-TC 20 W HCI-TC 35 W HCI-TC 70 W HCI-T   35/... HCI-T   70/... HCI-T 150/... HCI-TM 250/... HCI-TS   70/... HCI-TS 150/... HCI-TS 250/... HQI-TS 400/... HQI-TS 1000/D/S HQI-TS 2000/D/S — — — HCI-E/P   70/(clear) HCI-E/P 100/(clear) HCI-E/P 150/(clear) HQI-E 250/D HQI-E 400/... HCI-TT   70 W — HCI-TT 150 W HQI-T 250/D HQI-BT 400/...

— — CDM-TC 35 W — CDM-T   35 W CDM-T   70 W CDM-T 150 W — CDM-TD   70 W CDM-TD 150 W — — — — CDO-ET   70 W CDO-ET 100 W CDO-ET 150 W — — — — HPI Plus 400 W CDO-TT   70 W CDO-TT 100 W CDO-TT 150 W — HPI-T Plus 400 W

CMH 20/T/GU 6,5 CMH 20/TC/G 8,5 CMH 35/TC/G 8,5 CMH 70/TC/G 8,5 CMH   35/T/G12 CMH   70/T/G12 CMH 150/T/G12 — CMH 70/TD/RX7s CMH 150/TD/RX7s-24 — — — — — — — CMH   70/E/E 27 CMH 100/E/E 27 — ARC 250/D/40 — — — — ARC 250/T/E 40 ARC 400/T/E 40

70 W 150 W 250 W 400 W 50 W 70 W 100 W 150 W 250 W 400 W 50 W 70 W 100 W 150 W 250 W 400 W 600 W

RX7s RX7s Fc 2 Fc 2 E 27 E 27 E 40 E 40 E 40 E 40 E 27 E 27 E 40 E 40 E 40 E 40 E 40

6800 lm 15000 lm 25500 lm 48000 lm 3500 lm 5600 lm 10200 lm 17000 lm 31100 lm 55500 lm 4400 lm 6600 lm 10700 lm 17500 lm 33200 lm 56500 lm 90000 lm

NAV-TS   70 Super 4Y NAV-TS 150 Super 4Y NAV-TS 250 NAV-TS 400 NAV-E 50/E 4Y NAV-E 70/E 4Y NAV-E 100 Super 4Y NAV-E 150 Super 4Y NAV-E 250 Super 4Y NAV-E 400 Super 4Y NAV-T   50 Super 4Y NAV-T   70 Super 4Y NAV-T 100 Super 4Y NAV-T 150 Super 4Y NAV-T 250 Super 4Y NAV-T 400 Super 4Y NAV-T 600 Super 4Y

— — — — SON PIA 50 W SON PIA 70 W SON PIA Plus 100 W SON PIA Plus 150 W SON PIA Plus 250 W SON PIA Plus 400 W SON-T PIA Plus   50 W SON-T PIA Plus   70 W SON-T PIA Plus 100 W SON-T PIA Plus 150 W SON-T PIA Plus 250 W SON-T PIA Plus 400 W SON-T PIA Plus 600 W

— — — — LU   50/D/27 LU   70/D/27 LU 100/XO/D/40 LU 150/XO/D/40 LU 250/XO/D/40 LU 400/XO/D/40 LU   50/XO/T 27 LU   70/XO/T 27 LU 100/XO/T 40 LU 150/XO/T 40 LU 250/XO/T 40 LU 400/XO/T 40 LU 600/XO/T 40

Metal halide lamps

HIT-TC-CE HIT-TC-CE HIT-TC-CE HIT-TC-CE HIT-CE HIT-CE HIT-CE HIT-CE HIT-DE-CE HIT-DE-CE HIT-DE-CE HIT-DE HIT-DE HIT-DE HIE-CE/S HIE-CE/S HIE-CE/S HIE/m (HIE/c) HIE/m (HIE/c) HIE/m (HIE/c) HIE HIE HIT-CE/S HIT-CE/S HIT-CE/S HIT HIT

Sodium vapour discharge lamps HST-DE HST-DE HST-DE HST-DE HSE-E HSE-E HSE-MF HSE-MF HSE-MF HSE-MF HST-MF HST-MF HST-MF HST-MF HST-MF HST-MF HST-MF

523


Main Catalogue 29 · 2007- 2009 Table of contents

No. Accessories 006 015 017 018 021 022 023 024 025 026 028 029 033 034 036 037 038 063 085 086 087 089 090 091 092 101 102 103 105 106 107 108 109 110 111 112 113 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 138 139

524

Page

11 31 37 37 29 45 45 23 23 23 53 53 51 51 25 25 25 11 31 31 31 11 11 31 11 267 267 267 263 263 263 267 267 267 267 267 267 17 17 17 263 263 263 263 263 267 267 17 17 17 295 295 263 263 263 267 267 295 295

No. 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 200 202 204 207 208 212 213 214

Page 269 267 303 303 303 279 279 279 305 303 309 303 309 309 305 305 305 506 506 506 506 506 506 506 506 506 514 388 388 388 388 388 388 388 388 388 388 506 313 313 515 313 313 279 279 279 386 386 386 386 325 325 325 17 511 508 511 511 511 17 509

No. 217 218 219 220 221 223 225 229 233 235 238 243 244 245 246 247 248 249 252 254 255 256 257 258 259 260 261 262 263 264 265 267 269 270 280 283 284 294 300 305 306 307 308 309 310 311 312 313 315 316 317 321 322 323 325 335 338 340 341 342 343

Page 509 279 279 279 509 514 511 509 279 279 389 515 515 509 263 263 509 509 508 295 295 295 295 295 295 295 295 303 303 263 263 263 333 333 508 508 509 509 253 495 495 495 495 253 263 263 17 17 263 263 277 253 253 253 261 277 389 293 510 510 510

No. 348 350 351 352 353 354 360 361 362 363 375 376 377 378 379 380 382 383 384 386 387 388 391 406 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 433 434 435 436 437 438 440 441 442 443 444 445 456 463 464

Page 511 293 293 293 293 293 293 293 293 293 389 389 389 389 509 389 389 389 389 510 510 510 510 11 516 516 516 55 516 516 511 31 17 37 37 283 283 29 45 45 23 23 23 514 53 53 51 51 49 25 25 25 55 55 55 55 55 515 71 11 49

No. 465 468 473 474 477 478 479 480 481 483 484 485 486 487 488 489 490 491 492 493 497 498 600 606 607 618 623 629 632 633 634 639 644 647 648 649 650 653 655 656 657 658 659 663 664 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683

Page 514 71 71 71 516 514 514 249 249 17 514 31 31 31 514 11 11 31 11 69 514 510 279 267 277 277 507 507 507 41 41 41 507 507 17 17 507 283 283 279 309 309 267 303 267 305 303 253 253 313 253 313 309 331 331 331 331 305 305 313 305

No. 684 685 686 687 688 689 693 699 761 762 763 764 765 766

Page 305 305 313 305 305 313 305 305 513 512 512 512 513 512

Anchorage units 894 507 895 507 896 507 897 507 898 507 899 507

Poles 722 724 725 726 727 728 729 731 732 733 734 736 737 738 739 740 741 742 743 744 746 747 748 749 750 786 787 788 789 790 791 792 793 794 800

500 502 502 502 502 500 500 500 500 500 500 502 502 502 502 502 502 502 502 502 500 500 502 502 502 500 500 500 500 500 500 500 500 500 504

No. 801 802 803 804 805 806 807 808 809 810 811 815 817 822 823 824 825 826 834 835 836 837 838 872 874 875 876 877 880 881 882 883 884 885 886 887 888 906 907 908 909 910 911 912 913 914 915 916 917 918 926 927 928 930 934 937 938 941 943 944 945

Page 504 504 504 504 504 504 504 504 504 504 504 504 504 505 505 505 505 505 504 504 504 504 504 505 505 505 505 505 504 504 504 504 504 504 504 504 504 502 500 500 502 502 502 502 502 502 502 502 502 502 500 500 500 500 502 500 502 502 502 500 502

No. 951 954 956 957 958 959 960 965 969 974 977 985 986 989 990 991 992 993 994 996 997

Page 502 502 502 502 502 502 502 502 502 502 502 500 500 502 502 502 500 502 500 502 500

2000 2002 2003 2004 2005 2006 2007 2033 2034 2038 2039 2040 2042 2043 2044 2073 2075 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2106 2107 2109 2115 2116 2117 2118 2119

11 13 13 47 47 47 25 25 25 25 25 25 25 25 207 29 29 197 197 29 45 45 29 29 33 33 33 33 13 33 33 31 27 27 27 13 13

No. 2120 2121 2122 2125 2126 2127 2128 2129 2130 2131 2132 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2146 2147 2173 2180 2184 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2202 2203 2205 2206 2207 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2258 2259 2273 2293

Page 11 11 11 39 39 39 13 13 45 45 45 11 45 45 45 11 31 31 31 31 31 31 31 207 207 35 23 23 23 35 35 23 23 23 17 17 11 13 47 47 47 221 15 15 15 15 15 15 11 11 11 221 221 221 221 221 221 45 45 207 197


No. 2294 2295 2296 2297 2298 2299 2366 2374 2396 2397 2398 2399 2401 2403 2405 2407 2409 2411 2413 2415 2417 2419 2421 2422 2425 2426 2428 2430 2431 2435 2436 2437 2438 2440 2441 2442 2447 2457 2466 2474 2475 2477 2478 2479 2480 2482 2483 2488 2489 2490 2491 2492 2493 2494 2495 2497 2498 2499 2501 2502 2503

Page 197 197 203 203 203 203 83 207 203 203 203 203 223 223 223 223 223 223 223 223 223 223 223 223 175 175 223 175 175 175 175 175 175 195 217 217 219 219 83 199 199 219 219 219 219 219 219 195 195 195 195 195 199 199 195 195 219 219 129 129 129

No. 2505 2506 2507 2510 2511 2512 2514 2515 2516 2517 2518 2522 2523 2524 2533 2534 2535 2543 2544 2545 2585 2586 2590 2591 2595 2596 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2627 2628 2629 2630 2631 2632 2633 2634 2639 2645 2646 2654 2655 2657 2658

Page 129 129 129 129 129 129 127 189 189 129 129 189 189 189 129 189 189 127 127 127 121 121 121 121 121 121 111 125 125 125 125 117 117 117 117 111 125 125 125 125 95 95 95 95 111 111 119 119 119 119 119 119 115 115 115 113 113 113 113 119 119

No. 2678 2679 2687 2688 2689 2690 2691 2692 2693 2695 2696 2698 2699 2700 2705 2706 2707 2708 2709 2716 2717 2730 2731 2733 2734 2740 2741 2743 2744 2745 2746 2774 2775 2777 2779 2780 2781 2782 2788 2791 2792 2793 2795 2796 2799 2811 2816 2818 2819 2821 2822 2828 2832 2835 2838 2840 2842 2843 2844 2845 2848

Page 131 131 119 119 119 119 111 111 123 123 123 123 123 111 117 117 117 117 111 117 117 121 121 113 113 121 121 113 113 121 121 133 133 187 133 133 133 133 133 123 123 123 123 123 53 21 189 173 173 173 21 135 21 135 135 173 135 135 173 173 135

No. 2853 2854 2856 2857 2858 2859 2866 2874 2875 2877 2878 2881 2882 2883 2888 2889 2890 2892 2893 2910 2911 2919 2920 2921 2923 2925 2926 2939 2957 2958 2978 2981 2982 2983 2984 2985 2987 2988 2989 2990 2992 2993 2994 2998 2999

Page 21 21 19 135 135 19 19 191 135 187 131 135 187 135 135 173 173 131 135 51 51 31 51 51 31 37 37 37 131 131 131 191 187 191 131 191 131 187 191 131 191 191 131 131 131

3000 3012 3013 3014 3015 3016 3033 3034 3035 3047 3066 3068 3069 3070

139 139 139 139 139 99 99 99 169 97 171 171 171

No. 3071 3090 3091 3092 3094 3095 3101 3102 3103 3104 3105 3106 3111 3112 3113 3114 3118 3119 3120 3121 3134 3135 3140 3141 3143 3144 3147 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3185 3186 3187 3188 3190 3191 3202 3203 3205 3206 3210 3211 3213 3214 3220 3221 3222 3225 3226 3228 3230 3231 3240 3241

Page 171 129 129 129 129 129 139 139 139 139 139 139 141 141 141 141 141 141 201 201 99 99 193 193 169 169 169 171 171 171 171 201 201 201 201 101 101 101 101 101 101 101 101 53 53 53 53 53 53 53 53 215 215 215 215 215 215 201 201 193 193

No. 3266 3270 3271 3272 3275 3276 3277 3280 3281 3282 3291 3292 3301 3302 3303 3304 3305 3306 3363 3367 3370 3372 3374 3380 3381 3382 3410 3411 3412 3420 3421 3422 3435 3436 3440 3441 3448 3510 3511 3512 3520 3521 3522 3548 3563 3567 3648 3668 3748 3766 3767 3768 3774 3777 3778 3779 3780 3781 3785 3790 3791

Page 103 109 109 109 109 109 109 41 41 41 43 43 141 141 141 141 141 141 103 107 103 103 103 41 41 41 137 137 137 137 137 137 147 147 147 147 107 137 137 137 137 137 137 107 103 107 103 103 101 101 107 151 151 151 151 151 151 151 101 151 151

No. 3821 3825 3826 3847 3848 3851 3862 3866 3871

Page 49 49 49 97 97 97 97 101 97

4000 4004 4005 4007 4008 4020 4021 4023 4025 4030 4031 4033 4040 4041 4090 4095 4096 4140 4141 4142 4143 4170 4171 4175 4176 4177 4178 4179 4215 4216 4225 4227 4228 4229 4230 4235 4236 4237 4238 4240 4245 4246 4277 4278 4283 4290 4295 4296 4368 4401

107 107 107 107 145 149 149 145 145 149 149 147 147 143 143 143 185 185 185 185 105 163 105 105 163 163 163 149 149 165 149 149 145 145 165 165 165 165 155 155 155 153 153 153 167 167 167 105 81

No. 4402 4403 4404 4405 4406 4411 4412 4413 4421 4422 4425 4426 4429 4430 4431 4441 4442 4443 4448 4468 4475 4476 4477 4485 4491 4492 4493 4495 4497 4498 4510 4520 4530 4540 4548 4568 4569 4591 4592 4593 4594 4596 4597 4598 4640 4648 4661 4667 4668 4769 4964

Page 81 81 205 205 205 205 205 205 87 87 161 161 155 155 155 79 79 79 105 105 85 85 85 233 229 229 229 229 229 229 159 159 159 159 105 105 105 231 231 231 231 231 231 231 159 105 103 83 105 105 83

5000 5013 5014 5015 5020 5025 5040 5046

247 247 247 249 248 249 247

No. 5047 5048 5069 5070 5071 5072 5120 5121 5122 5123 5124 5125 5126 5127 5129 5130 5131 5132 5133 5134 5135 5136 5137 5154 5274 5310 5311 5320 5321 5374 5384 5453 5454 5510 5511 5512 5513 5514 5520 5521 5522 5523 5524 5553 5648 5748

Page 247 247 167 167 167 167 91 91 91 91 91 91 91 91 95 95 95 95 95 95 95 95 95 163 153 157 157 157 157 153 153 163 163 93 93 93 93 93 93 93 93 93 93 163 163 163

6000 6004 6005 6006 6007 6008 6009 6010 6011 6012 6013 6014 6015

241 71 71 71 71 71 73 73 73 73 73 89

525


Main Catalogue 29 · 2007- 2009 Table of contents

No. 6016 6017 6018 6020 6029 6030 6031 6032 6044 6045 6046 6048 6049 6052 6053 6054 6061 6074 6096 6100 6105 6113 6117 6146 6150 6165 6169 6183 6195 6196 6197 6198 6199 6209 6210 6211 6212 6213 6215 6216 6217 6218 6219 6220 6222 6239 6240 6245 6246 6247 6248 6261 6290 6291 6292 6300 6301 6302 6303 6304 6305

526

Page 89 89 89 71 163 241 241 241 89 89 89 163 89 73 73 71 97 73 97 73 245 57 57 73 73 163 57 57 73 73 73 73 73 55 57 55 55 55 55 55 55 55 55 57 57 57 57 71 57 209 181 97 181 181 181 179 57 57 57 57 57

No. 6306 6307 6308 6309 6310 6319 6320 6321 6322 6325 6326 6329 6330 6338 6339 6340 6341 6344 6345 6346 6361 6382 6386 6387 6394 6400 6401 6405 6406 6407 6409 6412 6413 6415 6416 6417 6420 6421 6423 6425 6426 6436 6438 6439 6442 6443 6491 6492 6494 6498 6504 6505 6506 6507 6508 6510 6511 6513 6515 6517 6518

Page 57 55 55 57 57 55 179 179 179 235 235 55 235 185 185 185 71 229 229 229 97 235 235 235 183 179 179 241 241 241 241 243 243 243 243 243 179 179 179 243 243 243 97 97 243 181 183 183 183 163 165 165 165 165 165 177 177 177 177 55 55

No. 6520 6521 6522 6523 6524 6528 6529 6530 6531 6532 6533 6534 6535 6536 6537 6538 6539 6540 6547 6548 6549 6566 6585 6586 6587 6588 6590 6592 6593 6594 6595 6596 6597 6598 6601 6602 6603 6605 6606 6607 6608 6609 6610 6615 6616 6617 6618 6619 6621 6622 6623 6634 6635 6636 6637 6638 6644 6645 6646 6658 6696

Page 167 71 237 237 237 237 237 167 167 237 237 237 209 209 209 209 209 209 237 183 237 163 209 209 209 209 183 239 239 239 239 239 239 239 211 211 211 71 71 71 71 71 211 211 211 211 59 59 211 213 213 97 73 73 73 97 97 239 239 97 213

No. 6697 6701 6702 6703 6704 6705 6706 6707 6708 6710 6711 6712 6713 6715 6716 6717 6718 6719 6720 6722 6723 6725 6726 6731 6733 6734 6735 6736 6737 6744 6745 6746 6748 6749 6758 6786 6787 6789 6790 6791 6792 6793 6795 6796 6797 6799 6801 6802 6803 6811 6812 6820 6821 6822 6823 6824 6825 6827 6831 6833 6835

Page 213 211 211 211 245 245 245 57 57 61 59 59 59 59 59 59 59 59 61 61 75 69 75 75 75 69 69 59 59 61 69 61 163 61 97 75 75 65 65 65 65 65 65 75 75 59 211 211 211 67 67 63 63 227 227 227 63 227 69 69 69

No. 6860 6875 6876 6877 6878 6880 6881 6882 6883 6884 6885 6886 6887 6901 6902 6903 6904 6907 6908 6909 6910 6919 6929 6948 6960 6965 6971

Page 103 225 225 225 225 77 77 77 77 77 77 77 77 61 61 61 61 61 61 61 61 59 59 163 103 103 103

7000 7315 7316 7317 7319 7320 7343 7344 7346 7347 7380 7423 7424 7431 7442 7443 7445 7446 7447 7449 7450 7454 7455 7457 7460 7465 7470 7473 7474 7505 7508 7509

265 265 265 265 265 279 279 279 279 259 259 259 259 281 281 279 279 279 279 279 279 279 275 275 275 275 275 275 263 263 263

No. 7511 7512 7513 7514 7515 7516 7523 7524 7525 7526 7527 7529 7533 7534 7580 7581 7590 7591 7595 7596 7597 7611 7612 7613 7614 7650 7654 7656 7657 7658 7710 7711 7712 7713 7714 7715 7720 7721 7722 7723 7724 7821 7822 7860 7861 7862 7863 7864 7865 7866 7867 7868 7869 7870 7871 7872 7873 7874 7875 7876 7877

Page 263 263 263 263 263 263 263 263 263 263 263 263 263 259 277 277 277 277 273 273 273 273 273 275 275 253 253 253 253 253 275 275 275 275 275 275 263 263 263 263 263 261 261 267 267 269 267 269 269 267 269 269 267 267 269 267 269 269 267 269 269

No. 7878 7879 7880 7881 7882 7891 7892 7895 7896 7898 7899 7921 7922 7925 7941 7942 7943 7944 7945

Page 267 269 267 267 269 267 269 271 271 271 271 255 255 255 257 257 257 257 257

8000 8000 8005 8007 8012 8013 8014 8015 8016 8017 8018 8019 8020 8021 8022 8023 8024 8025 8026 8027 8028 8029 8030 8031 8032 8033 8034 8035 8036 8037 8038 8039 8040 8041 8042 8043 8044 8047 8052 8053

305 305 305 305 305 305 305 311 305 311 305 305 305 305 305 305 305 305 305 305 305 305 309 309 309 305 309 305 309 305 309 309 309 301 301 301 311 493 493

No. 8054 8055 8056 8058 8071 8072 8073 8074 8075 8076 8077 8078 8079 8080 8081 8082 8083 8084 8085 8086 8087 8088 8089 8090 8091 8092 8093 8094 8095 8096 8097 8098 8099 8111 8114 8115 8116 8117 8119 8120 8121 8122 8123 8125 8128 8129 8130 8131 8132 8134 8135 8136 8137 8138 8139 8140 8141 8142 8143 8145 8146

Page 301 311 305 301 487 487 487 487 487 487 455 455 455 455 469 469 301 301 469 469 301 301 311 483 483 455 455 301 311 311 301 461 461 305 353 353 353 353 353 465 393 465 393 393 465 465 437 437 459 437 437 337 337 337 337 337 499 499 337 499 499

No. 8152 8153 8171 8172 8180 8181 8183 8184 8186 8187 8189 8191 8192 8194 8199 8200 8201 8203 8206 8208 8209 8210 8211 8212 8213 8214 8215 8216 8217 8218 8219 8220 8223 8230 8233 8235 8236 8238 8239 8244 8246 8249 8252 8253 8254 8257 8258 8259 8269 8281 8282 8283 8284 8285 8287 8289 8293 8294 8295 8296 8297

Page 493 493 487 487 469 469 467 251 463 463 467 487 487 311 461 477 477 479 479 475 475 477 393 397 393 397 393 399 399 471 465 473 465 473 465 499 499 463 463 499 499 489 491 493 493 493 491 493 491 491 491 489 489 489 489 489 491 491 491 491 491


No. 8298 8299 8300 8301 8302 8305 8306 8307 8314 8315 8316 8319 8322 8323 8324 8325 8333 8340 8341 8342 8344 8350 8351 8352 8358 8376 8378 8380 8381 8382 8383 8384 8396 8399 8401 8403 8405 8406 8407 8408 8409 8412 8413 8415 8416 8417 8418 8419 8421 8422 8426 8427 8428 8429 8431 8432 8433 8434 8436 8437 8438

Page 491 491 319 319 319 319 319 319 401 265 265 265 385 385 385 265 465 385 385 385 301 265 265 479 479 391 391 481 481 481 481 481 491 491 265 275 275 275 275 275 275 265 265 365 365 369 365 369 265 369 339 339 339 339 339 369 339 355 341 341 341

No. 8439 8440 8441 8442 8444 8445 8446 8447 8449 8451 8453 8455 8472 8474 8476 8477 8480 8481 8482 8484 8485 8486 8487 8488 8489 8490 8491 8499 8503 8504 8507 8508 8509 8510 8511 8512 8513 8518 8519 8521 8524 8529 8532 8533 8534 8539 8542 8543 8544 8546 8547 8549 8550 8552 8558 8582 8583 8584 8586 8587 8588

Page 335 349 379 355 335 335 349 379 335 335 387 387 397 397 359 359 387 387 367 355 283 283 283 283 283 407 407 407 281 281 281 281 293 293 403 365 363 363 403 403 383 403 381 381 383 381 357 357 357 357 357 383 281 281 281 401 281 281 281 281 285

No. 8589 8590 8591 8593 8594 8597 8598 8599 8600 8602 8603 8604 8606 8607 8608 8609 8610 8611 8612 8613 8614 8615 8616 8617 8618 8620 8621 8626 8628 8629 8630 8632 8633 8637 8638 8640 8641 8642 8643 8644 8645 8646 8647 8650 8651 8652 8653 8654 8658 8660 8664 8670 8671 8673 8674 8675 8676 8678 8679 8681 8682

Page 285 283 283 283 285 285 285 285 317 323 323 323 313 313 317 317 317 317 331 317 331 331 313 313 313 317 317 323 323 323 343 343 343 371 371 371 371 323 323 323 375 371 371 307 307 253 315 315 253 253 409 351 327 327 327 327 351 373 373 361 361

No. 8685 8688 8689 8690 8691 8692 8693 8694 8695 8696 8697 8698 8699 8700 8701 8702 8703 8704 8705 8708 8711 8712 8713 8715 8716 8718 8719 8720 8721 8722 8730 8732 8733 8734 8735 8736 8737 8738 8740 8741 8742 8743 8744 8745 8746 8747 8750 8751 8752 8753 8754 8755 8756 8757 8758 8759 8760 8769 8770 8772 8773

Page 401 299 299 299 361 361 325 325 325 301 301 301 301 307 313 331 313 313 313 313 313 313 313 313 313 331 331 331 453 453 333 323 323 323 419 419 419 419 347 347 323 323 323 345 345 333 307 307 253 315 253 345 315 315 253 253 253 333 333 333 333

No. 8774 8775 8776 8778 8779 8780 8782 8783 8784 8787 8788 8789 8790 8791 8792 8800 8801 8802 8803 8804 8805 8806 8807 8808 8809 8810 8814 8815 8819 8821 8822 8830 8831 8832 8833 8834 8835 8836 8841 8842 8844 8845 8846 8847 8852 8853 8854 8856 8857 8858 8859 8860 8871 8872 8873 8874 8875 8876 8877 8878 8881

Page 327 447 447 327 327 327 329 329 333 327 327 327 327 453 453 329 329 329 303 329 303 303 303 303 303 297 303 297 303 483 483 323 323 323 323 323 323 409 445 445 377 377 377 333 329 329 329 329 329 329 329 329 411 411 411 411 413 413 425 425 483

No. 8882 8889 8890 8894 8895 8896 8897 8898 8900 8901 8902 8903 8904 8908 8912 8914 8915 8916 8918 8920 8921 8922 8931 8932 8933 8934 8935 8936 8937 8939 8942 8943 8945 8949 8966 8969 8980 8983 8984 8985 8988 8989 8990 8993 8994 8995 8996 8997 8998 8999

Page 483 485 485 377 377 377 321 321 295 295 295 295 485 295 287 295 287 289 287 289 445 445 413 413 287 291 419 419 419 419 289 291 427 485 429 429 395 423 431 431 395 395 395 423 421 433 433 421 421 391

9000 9016 9019 9046 9048 9050 9054 9055 9057

457 495 349 459 497 497 497 497

No. 9059 9073 9092 9093 9101.1 9101.3 9101.6 9101.8 9103.1 9103.3 9103.6 9103.8 9108.1 9108.3 9108.6 9108.8 9116 9122 9127 9129.1 9129.3 9129.6 9129.8 9137 9141 9147 9148 9150 9153 9155 9163 9164 9166 9168 9171 9183 9191 9192 9193 9199.1 9199.3 9199.6 9199.8 9201.1 9201.3 9201.6 9201.8 9202.1 9202.3 9202.6 9202.8 9204.1 9204.3 9204.6 9204.8 9205.1 9205.3 9205.6 9205.8 9222 9226.1

Page 407 495 495 495 443 443 443 443 443 443 443 443 443 443 443 443 457 497 497 435 435 435 435 407 497 355 459 439 439 497 495 495 251 459 251 467 497 497 497 435 435 435 435 443 443 443 443 443 443 443 443 443 443 443 443 443 443 443 443 497 435

No. 9226.3 9226.6 9242.1 9242.3 9242.6 9243.1 9243.3 9243.6 9243.8 9250 9252 9253 9259 9310 9316 9318.1 9318.3 9318.6 9318.8 9319.1 9319.3 9319.6 9319.8 9350 9395 9411 9412 9416 9437 9441 9468 9471 9475 9480 9483 9484 9485 9495 9496 9497 9498 9504.1 9504.3 9504.6 9504.8 9508 9509 9513.1 9513.3 9513.6 9513.8 9514 9518.1 9518.3 9518.6 9518.8 9559 9566 9575 9584 9585

Page 435 435 435 435 435 435 435 435 435 439 497 497 439 295 495 443 443 443 443 443 443 443 443 439 251 295 295 495 251 459 459 251 259 277 367 251 367 415 415 417 251 443 443 443 443 293 293 443 443 443 443 365 443 443 443 443 251 349 277 409 277

No. 9586 9587 9588 9616 9674 9677 9685 9716 9734 9754.1 9754.3 9754.6 9755 9756 9757 9772 9774 9804 9837 9841 9842 9844 9846 9849 9850 9858 9863 9864 9867 9873 9881 9886.1 9886.3 9886.6 9886.8 9889 9890 9894.1 9894.3 9894.6 9897 9898 9900 9906 9912 9914 9919 9925 9926 9927 9951.6 9951.8 9954 9957 9962 9973 9976 9991 9997 9998 9999

Page 409 447 447 495 251 405 409 495 409 443 443 443 449 449 449 449 405 485 409 415 415 441 457 485 261 445 415 415 405 415 415 435 435 435 435 417 417 443 443 443 441 467 485 485 287 451 451 417 417 417 435 435 451 445 445 445 405 451 441 485 485

527


General Conditions of Sale · Main Catalogue 29

Our deliveries are effected in accordance with the “General Conditions of Supply and Delivery for Products and Services of the Electrical Industry“ as issued and amended by the ZVEI association of German Electrical and Electronic Manufacturers and the supplementary clause “extended retention of title“ only. In addition, our terms and conditions of sale and delivery hereinafter set forth shall apply. Quotations – All quotations are subject to change without notice. Delivery – Deliveries shall be effected ex works for the purchaser's account and at his risk. Risk of breakage shall be borne by the purchaser. If requested, risk of breakage can be assumed by us to a delivery address in Europe and charged separately at 1% of the goods value. Overseas premium on request. Time of delivery – This shall be stated to the best of our ability and shall be deemed binding only when explicitly confirmed by us. Differing from the “General Conditions of Supply and Delivery for Products and Services of the Electrical Industry“ (ZVEI), entitlement to damages resulting from delivery delays is excluded if these are only due to light negligence on our part. In case of violation of material contractual commitments the compensation is limited to the foreseeable contract typical damage. Prices – As per our current price list in Euro. Charges for legalization and courier service shall be made at actual cost. Outer packing shall be charged at cost and cannot be returned. If a certain net order value is reached, we can arrange deliveries on the following terms: freight paid to German border or FOB German seaport. In this case, we follow the relevant rules of the INCOTERMS, latest edition. On delivery, we always charge the current prices, even if other prices were quoted. Except for routine deliveries by our contract forwarders, the outer packing shall be invoiced. Payment – If not otherwise arranged, payment is to be made by irrevocable and confirmed documentary letter of credit, to be established through a first class foreign bank with Dresdner Bank AG or Commerzbank AG, Iserlohn. All banking charges outside Germany including advising and negotiating commission and reimbursing bank fees for a/c of applicant. If we agree to open an account, all invoices are due without deduction within 30 days from date of invoice. Payment is to be considered effected as soon as we have the invoiced amount at our disposal. If payment is not effected within the period of 30 days after date of invoice, the purchaser comes into default without prior reminder. If there is any doubt about the receipt or date of receipt of the invoice, then payment becomes due 30 days after receipt of our service. In this case the purchaser comes into default as from the 31st day after receipt of our service. If the due date for payment is exceeded, we are authorised to charge default interest at the rate customary in banking as per § 288 BGB + § 247 (German Civil Code). Our right to claim additional damage shall not be influenced in this case. Contrary to differing payment terms which may have been explicitly agreed upon in individual cases, settlement becomes due immediately if circumstances arise with regard to the purchaser's person that make the upholding of existing agreements unreasonable. Proprietary rights / reservation of title – Additionally to the “General Conditions of Supply and Delivery for Products and Services of the Electrical Industry“ as issued by the ZVEI, the following shall apply: The purchaser is entitled to sell the goods delivered by us in customary business transactions, provided no ban of assignment of rights has been agreed between himself and his customer. The purchaser assigns to us as security the entitlement to the purchase price which arises from the sale. He is, however, empowered to collect debts, which he has assigned to us provided this empowerment is not revoked. The empowerment can be revoked if the purchaser does not fulfil or ceases to fulfil his contractual obligations. We are entitled to give notification of the occurred assignment of rights if the direct debit mandate has been revoked. The purchaser must promptly

528

provide the documentation which is necessary for the notification of the assignment of rights and for collection of monies. The provisions of III. paragraph 1 sentence 2 of the “General Conditions of Supply and Delivery for Products and Services of the Electrical Industry“ as issued by the ZVEI shall apply as appropriate for the case of greater than 20 % excess security. Design – We reserve the right to make alterations in design and construction which are necessitated by technical progress and customary for the lighting industry, provided they are not individually unreasonable for the purchaser. Warranty – Supplementary to regulations in Article VIII and XI. of the “General Conditions of Supply and Delivery for Products and Services of the Electrical Industry“ (ZVEI), the following stipulations shall be effective: Additional to article VIII.3 complaints referring to delivered quantities and visual damages have to be effected within 7 days after receipt of delivery. Additional to article VIII.9 revert claims from purchasers shall be applied as follows: The purchaser must, in case his customer or his customers’ customer claims his justified right for subsequent fulfilment, give us the opportunity to carry out the subsequent fulfilment ourselves within a reasonable period, before obtaining replacement elsewhere. The purchaser shall impose this obligation on his customer accordingly. If the purchaser violates this obligation, we reserve the right to deduct the expenses for subsequent fulfilment to the amount resulting from our own subsequent fulfilment. § 443 BGB (German Civil Code) stays unaffected. Furthermore, reimbursement of expenses arising from subsequent fulfilment and passed on by the purchasers‘ customer to the purchaser is ruled out if the purchaser refrained from legitimately refusing this kind of subsequent fulfilment or both kinds of subsequent fulfilment. Otherwise, article XI. of the “General Conditions of Supply and Delivery for Products and Services of the Electrical Industry“ (ZVEI) applies for compensation claims. Liability for services – We accept no liability for consequential damages due to defective light planning which we have prepared as a service free of charge during preliminary stages of contract negotiations. An explicit written arrangement shall be needed if such plans are to become a requirement or constituent of a delivery or service from us. Application as determined – According to the Law on the Safety of Appliances, luminaires are technical products and must be used only in accordance with their intended purpose. The use of luminaires and accessories in a manner other than in accordance with their intended purpose as well as unauthorised alteration of our luminaires without our express written consent shall release us from any obligation in the event of a claim. Returns – Returns not sent back within the warranty frame work according to the right of withdrawal shall only be credited if our prior consent is available. Originally packed and undamaged goods shall be credited at 80 % of the price invoiced if they correspond with the current sales programme. Necessary re-conditioning and packing cost as well as transport costs incurred by us shall be deducted in addition and without special notification. Custom-made and special electrical productions cannot be returned. Disposal – Non-private purchasers undertake to ensure that the products supplied are disposed of in accordance with the provisions of the Directive on Waste Electric and Electronic Equipment. Where products are resold, the purchaser transfers this obligation to its contractual partner. Exports – The delivery of our products and the submission of quotations thereon to countries outside the European Union - also through third parties - shall require our prior consent. Other – Place of performance and legal venue is Menden. All contractual relations shall be governed by German law.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.