Russwood Flooring Specification Guide

RUSSWOOD INTERIORS SPECIFICATION GUIDE Solid & Engineered Oak Flooring Oak Parquet Flooring Maritime Pine Flooring Accessories Internal Timber Wall Panelling

At Russwood, we’re passionate about our flooring and supply a wide range of solid and engineered oak boards to both commercial and domestic projects throughout the UK. All our boards are tongue and grooved on all four sides to reduce waste and are finished with a micro-bevel on the long side of the board.

Flooring Components Finish your project with style. We can supply stair treads, stair nosings, skirting boards and thresholds which can be ordered in a range of colours to match your floor. These details can help to unify the space in your flooring project. Speak to our flooring experts who can help you choose the right accessories that will create a seamlessly finished flooring project.

Solid

Stair Nosings

Engineered

Skirtings

We are also happy to write the K21 NBS specification for any of our flooring products.

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Facings

Chateau Character

Smooth, contemporary, sleek

Chateau Oak Flooring A smooth contemporary take on oak flooring; the sleek natural look of these modern boards can unify and enhance any modern living space.

Character Grade Ideal for naturally inspired interiors. The beautifully prominent figuring with large hand-filled and sanded knots illustrate the true, rustic nature of this product.

Bespoke options - board widths and pre-finished colours.

See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality European oak Solid or engineered boards Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: Solid 20mm thick: 120mm; 150mm; 170mm; 185mm Engineered 15mm thick: 155mm; 175mm; 190mm; 225mm Engineered 20mm thick: 225mm, other widths available on request Lengths: Solid Boards: 70% will be over 1.7m length and up to 2.5m Engineered Boards: average lengths 2.2-2.4m TOG Rating: Solid Board 20mm 1.32 TOG 15mm 2 layer Engineered Board 1.24 TOG 20mm 2 layer Engineered Board 1.50 TOG Heat Transfer: Solid Board 0.156 Wm2k 15mm 2 layer Engineered Board 0.118 Wm2k 20mm 2 layer Engineered Board 0.133 Wm2k

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Stair treads, stair nosings, skirtings and thresholds also available.

Chateau Character/Prime

Smooth, contemporary, sleek

Chateau Oak Flooring A smooth contemporary take on oak flooring; the sleek natural look of these modern boards can unify and enhance any modern living space.

Character/Prime Grade This grade retains a rustic charm but the knots are much smaller than those featuring in a Character grade board.

This is a great option for those who like the natural effect of the wood but prefer a slightly more uniform appearance.

Bespoke options - board widths and pre-finished colours.

See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality European oak Solid or engineered boards Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: Solid 20mm thick: 120mm; 150mm; 170mm; 185mm Engineered 15mm thick: 155mm; 175mm; 190mm; 225mm Engineered 20mm thick: 225mm, other widths available on request Lengths: Solid Boards: 70% will be over 1.7m length and up to 2.5m Engineered Boards: average lengths 2.2-2.4m TOG Rating: Solid Board 20mm 1.32 TOG Engineered Board 15mm 2 layer 1.24 TOG Engineered Board 20mm 2 layer 1.50 TOG Heat Transfer: Solid Board 0.156 Wm2k 15mm 2 layer Engineered Board 0.118 Wm2k 20mm 2 layer Engineered Board 0.133 Wm2k

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Stair treads, stair nosings, skirtings and thresholds also available.

Chateau Prime

Smooth, contemporary, sleek

Chateau Oak Flooring A smooth contemporary take on oak flooring; the sleek natural look of these modern boards can unify and enhance any modern living space.

Prime Grade Clean, contemporary and incredibly stylish. Each board has been carefully selected to ensure that the beautiful figuring of the wood is highlighted, but only small pre-filled and sanded knots are present.

Bespoke options - board widths and pre-finished colours.

See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality European oak Solid or engineered boards Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: Solid 20mm thick: 120mm; 150mm; 170mm; 185mm Engineered 15mm thick: 155mm; 175mm; 190mm; 225mm Engineered 20mm thick: 225mm, other widths available on request Lengths: Solid Boards: 70% will be over 1.7m length and up to 2.5m Engineered Boards: average lengths 2.2-2.4m TOG Rating: Solid Board 20mm 1.32 TOG 15mm 2 layer Engineered Board 1.24 TOG 20mm 2 layer Engineered Board 1.50 TOG Heat Transfer: Solid Board 0.156 Wm2k 15mm 2 layer Engineered Board 0.118 Wm2k 20mm 2 layer Engineered Board 0.133 Wm2k

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Stair treads, stair nosings, skirtings and thresholds also available.

Brushed Character

Textured, contemporary, timeless

Brushed Oak Flooring To create this effect, wire brushes are used to pull out the softer spring wood, exposing the harder summer wood, thus accentuating the grain and creating a beautifully textured surface.

Character Grade Ideal for naturally inspired interiors. The beautifully prominent figuring and large hand-filled and brushed knots, illustrate the true rustic nature of this product.

Bespoke options - board widths and pre-finished colours.

See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality European oak Solid or engineered boards Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: Solid 20mm thick: 120mm; 150mm; 170mm; 185mm Engineered 15mm thick: 155mm; 175mm; 190mm; 225mm Engineered 20mm thick: 225mm, other widths available on request TOG Rating: Solid Board 20mm 1.32 TOG Engineered Board 15mm 2 layer 1.24 TOG Engineered Board 20mm 2 layer 1.50 TOG Lengths: Solid Boards: 70% will be over 1.7m length and up to 2.5m Engineered Boards: average lengths 2.2-2.4m Heat Transfer: Solid Board 0.156 Wm2k 15mm 2 layer Engineered Board 0.118 Wm2k 20mm 2 layer Engineered Board 0.133 Wm2k

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Stair treads, stair nosings, skirtings and thresholds also available.

Brushed Character/Prime

Textured, contemporary, timeless

Brushed Oak Flooring To create this effect, wire brushes are used to pull out the softer spring wood, exposing the harder summer wood, thus accentuating the grain and creating a beautifully textured surface.

Character/Prime Grade This grade retains a rustic charm but the knots are much smaller than those featuring in a Character grade board. This is a great option for those who like the natural effect of the wood but prefer a slightly more uniform appearance.

Bespoke options - board widths, pre-finished colours.

See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality European oak Solid or engineered boards Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: Solid 20mm thick: 120mm; 150mm; 170mm; 185mm Engineered 15mm thick: 155mm; 175mm; 190mm; 225mm Engineered 20mm thick: 225mm, other widths available on request Lengths: Solid Boards: 70% will be over 1.7m length and up to 2.5m Engineered Boards: average lengths 2.2-2.4m TOG Rating: Solid Board 20mm 1.32 TOG 15mm 2 layer Engineered Board 1.24 TOG 20mm 2 layer Engineered Board 1.50 TOG Heat Transfer: Solid Board 0.156 Wm2k 15mm 2 layer Engineered Board 0.118 Wm2k 20mm 2 layer Engineered Board 0.133 Wm2k

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Stair treads, stair nosings, skirtings and thresholds also available.

Brushed Prime

Textured, contemporary, timeless

Brushed Oak Flooring To create this effect, wire brushes are used to pull out the softer spring wood, exposing the harder summer wood, thus accentuating the grain and creating a beautifully textured surface.

Prime Grade Clean, contemporary and incredibly stylish. Each board has been carefully selected to ensure that the beautiful figuring of the wood is highlighted but, only small pre-filled and brushed knots are present.

Bespoke options - board widths and pre-finished colours.

See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality European oak Solid or engineered boards Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: Solid 20mm thick: 120mm; 150mm; 170mm; 185mm Engineered 15mm thick: 155mm; 175mm; 190mm; 225mm Engineered 20mm thick: 225mm, other widths available on request Lengths: Solid Boards: 70% will be over 1.7m length and up to 2.5m Engineered Boards: average lengths 2.2-2.4m TOG Rating: Solid Board 20mm 1.32 TOG 15mm 2 layer Engineered Board 1.24 TOG 20mm 2 layer Engineered Board 1.50 TOG Heat Transfer: Solid Board 0.156 Wm2k 15mm 2 layer Engineered Board 0.118 Wm2k 20mm 2 layer Engineered Board 0.133 Wm2k

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Stair treads, stair nosings, skirtings and thresholds also available.

17th Century Original

Authentic, aged and distressed

17th Century Oak Flooring A luxurious flooring choice which evokes a feeling of times past, this aged and distressed look can be enhanced using a range of techniques: hand scraped edges, rolling and tumbling can be chosen either individually or as a combination for you to create your bespoke look and feel. The knots are hand filled with a natural filler which dry to produce sunken knots.

Original Authentic period oak flooring available without any distressing techniques applied.

Please see our colour guide for pre-finished colour options: www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality European oak Solid or engineered boards Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: Solid 20mm thick: 120mm; 150mm; 170mm; 185mm Engineered 15mm thick: 155mm; 175mm; 190mm; 225mm Engineered 20mm thick: 225mm, other widths available on request Lengths: Solid Boards: 70% will be over 1.7m length and up to 2.5m Engineered Boards: average lengths 2.2-2.4m TOG Rating: Solid Board 20mm 1.32 TOG 15mm 2 layer Engineered Board 1.24 TOG 20mm 2 layer Engineered Board 1.50 TOG Heat Transfer: Solid Board 0.156 Wm2k 15mm 2 layer Engineered Board 0.118 Wm2k 20mm 2 layer Engineered Board 0.133 Wm2k

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Stair treads, stair nosings, skirtings and thresholds also available.

17th Century Rolled

Authentic, aged and distressed

17th Century Oak Flooring A luxurious flooring choice which evokes a feeling of times past, this aged and distressed look can be enhanced using a range of techniques: hand scraped edges, rolling or tumbling can be chosen either individually or as a combination for you to create your bespoke look and feel. The knots are hand filled with a natural filler which dry to produce sunken knots.

Rolled This effect is produced by machining the top of the boards which results in surface indentations and a lightly distressed look.

Bespoke options - Hand Scraped and pre-finished colour options.

See www.russwood.co.uk/flooring/colour-guide

17th Century

SPECIFICATION

Finest quality European oak Solid or engineered boards

Widths: Solid 20mm thick: 120mm; 150mm; 170mm; 185mm Engineered 15mm thick: 155mm; 175mm; 190mm; 225mm Engineered 20mm thick: 225mm, other widths available on request Lengths: Solid Boards: 70% will be over 1.7m length and up to 2.5m Engineered Boards: average lengths 2.2-2.4m TOG Rating: Solid Board 20mm 1.32 TOG 15mm 2 layer Engineered Board 1.24 TOG 20mm 2 layer Engineered Board 1.50 TOG Heat Transfer: Solid Board 0.156 Wm2k 15mm 2 layer Engineered Board 0.118 Wm2k 20mm 2 layer Engineered Board 0.133 Wm2k

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Rolled

Hand-selected and graded boards ensure that a consistently Authentic, aged and distressed high quality is achieved.

Stair treads, stair nosings, skirtings and thresholds also available.

17th Century Hand Scraped

Authentic, aged and distressed

17th Century Oak Flooring A luxurious flooring choice which evokes a feeling of times past, this aged and distressed look can be enhanced using a range of techniques: hand scraped edges, rolling or tumbling can be chosen either individually or as a combination for you to create your bespoke look and feel. The knots are hand filled with a natural filler which dry to produce sunken knots.

SPECIFICATION Finest quality European oak Solid or engineered boards Hand-selected and graded boards ensure that a consistently high quality is achieved.

Hand Scraped In order to add style and authenticity, the edges of the boards are scraped by hand to provide that special final touch. This is reminiscent of a technique used years ago prior to machine based sanding and the stunning effect holds true today.

Widths: Solid 20mm thick: 120mm; 150mm; 170mm; 185mm Engineered 15mm thick: 155mm; 175mm; 190mm; 225mm Engineered 20mm thick: 225mm, other widths available on request

Bespoke options - Rolled or Tumbled and pre-finished colour options.

See www.russwood.co.uk/flooring/colour-guide

Lengths: Solid Boards: 70% will be over 1.7m length and up to 2.5m Engineered Boards: average lengths 2.2-2.4m TOG Rating: Solid Board 20mm 1.32 TOG 15mm 2 layer Engineered Board 1.24 TOG 20mm 2 layer Engineered Board 1.50 TOG Heat Transfer: Solid Board 0.156 Wm2k 15mm 2 layer Engineered Board 0.118 Wm2k 20mm 2 layer Engineered Board 0.133 Wm2k

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Stair treads, stair nosings, skirtings and thresholds also available.

17th Century Tumbled

Authentic, aged and distressed

17th Century Oak Flooring A luxurious flooring choice which evokes a feeling of times past, this aged and distressed look can be enhanced using a range of techniques: hand scraped edges, rolling or tumbling can be chosen either individually or as a combination for you to create your bespoke look and feel. The knots are hand filled with a natural filler which dry to produce sunken knots.

Tumbled This effect is similar to Rolled, but more pronounced as the boards are more heavily distressed, particularly on the edges.

The boards are tossed around in a drum along with chains, nuts and bolts to randomly distress the surfaces; no two boards will be the same.

Bespoke options - Hand Scraped and pre-finished colour options.

See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality European oak Solid or engineered boards Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: Solid 20mm thick: 120mm; 150mm; 170mm; 185mm Engineered 15mm thick: 155mm; 175mm; 190mm; 225mm Engineered 20mm thick: 225mm, other widths available on request Lengths: Solid Boards: 70% will be over 1.7m length and up to 2.5m Engineered Boards: average lengths 2.2-2.4m TOG Rating: Solid Board 20mm 1.32 TOG 15mm 2 layer Engineered Board 1.24 TOG 20mm 2 layer Engineered Board 1.50 TOG Heat Transfer: Solid Board 0.156 Wm2k 15mm 2 layer Engineered Board 0.118 Wm2k 20mm 2 layer Engineered Board 0.133 Wm2k

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Stair treads, stair nosings, skirtings and thresholds also available.

Cross Sawn Hand Finished

Bespoke, aged and unique

Cross Sawn Oak Flooring Truly unique and highly individual, this bespoke flooring offers a very distinctive look and feel. Each board is cross-sawn and finished by hand using techniques reminiscent of bygone days: knots are left raised, tool marks are visible and the boards are brushed by hand, all to create an impression of hundreds of years of use. Although available in both solid and engineered oak, the solid boards will show off a more dramatic effect due to the thickness of the oak.

Bespoke options - board widths and pre-finished colours.

See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality European oak Solid or engineered boards Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: Solid 20mm thick: 150mm; 170mm; 185mm; 205mm Engineered 15mm thick: 190mm Lengths: Solid Boards: 70% will be over 1.7m length and up to 2.5m Engineered Boards: average lengths 2.2-2.4m TOG Rating: Solid Board 20mm 1.32 TOG 15mm 2 layer Engineered Board 1.24 TOG Heat Transfer: Solid Board 0.156 Wm2k 15mm 2 layer Engineered Board 0.118 Wm2k Stair treads, stair nosings, skirtings and thresholds also available.

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Unfinished Character B

Elegant, flexible finishes

Unfinished Oak Flooring A blank canvas; our Unfinished Oak Flooring gives you complete control over the look and finish of your floor.

Character B This is our rustic style flooring, where open knots and imperfections are left unfilled to retain the traditional, natural look of the floor. For a warm, country feel, this is the optimal choice.

Bespoke options - board widths and your choice of on-site finishing. We recommend our range of Osmo hard wax oils for best results.

See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality European oak Solid boards only Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: Solid 20mm thick: 120mm; 150mm; 170mm; 185mm Lengths: Solid Boards: 70% will be over 1.7m length and up to 2.5m TOG Rating: Solid Board 20mm 1.32 TOG Heat Transfer: Solid Board 0.156 Wm2k Stair treads, stair nosings, skirtings and thresholds also available.

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Unfinished Character A

Elegant, flexible finishes

Unfinished Oak Flooring A blank canvas; our Unfinished Oak Flooring gives you complete control over the look and finish of your floor.

Character A In this, our most popular product, all knots have been filled and sanded to complement the natural figuring and colour of the boards. This is the perfect choice if you are looking for some character but would prefer a slightly less rustic appearance than Character B. Bespoke options - board widths and your choice of on-site finishing. We recommend our range of Osmo hard wax oils for best results.

See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality European oak Solid or engineered boards Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: Solid 20mm thick: 120mm; 150mm; 170mm; 185mm Engineered 15mm thick: 155mm; 175mm; 190mm; 225mm Engineered 20mm thick: 225mm, other widths available on request Lengths: Solid Boards: 70% will be over 1.7m length and up to 2.5m Engineered Boards: average lengths 2.2-2.4m TOG Rating: Solid Board 20mm 1.32 TOG 15mm 2 layer Engineered Board 1.24 TOG 20mm 2 layer Engineered Board 1.50 TOG Heat Transfer: Solid Board 0.156 Wm2k 15mm 2 layer Engineered Board 0.118 Wm2k 20mm 2 layer Engineered Board 0.133 Wm2k

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Stair treads, stair nosings, skirtings and thresholds also available.

Unfinished Prime

Elegant, flexible finishes

Unfinished Oak Flooring A blank canvas; our Unfinished Oak Flooring gives you complete control over the look and finish of your floor.

Prime and Prime Plus If you are looking for a clean, contemporary look then our Prime grades fit the bill. Visually, these are our cleanest grades of timber and each board has been carefully selected to ensure that the beautiful grain of the wood is highlighted whilst only a few small knots are present. Prime grade refers to using solid boards. Prime Plus refers to using engineered - our cleanest grade with only very few pin-hole knots present.

Bespoke options - board widths and your choice of on-site finishing. We recommend our range of Osmo hard wax oils for best results.

See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality European oak Solid boards - Prime Engineered boards - Prime plus Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: Solid 20mm thick: 120mm; 150mm; 170mm; 185mm Engineered 15mm thick: 155mm; 175mm; 190mm; 225mm Engineered 20mm thick: 225mm, other widths available on request Lengths: Solid Boards: 70% will be over 1.7m length and up to 2.5m Engineered Boards: average lengths 2.2-2.4m TOG Rating: Solid Board 20mm 1.32 TOG 15mm 2 layer Engineered Board 1.24 TOG 20mm 2 layer Engineered Board 1.50 TOG Heat Transfer: Solid Board 0.156 Wm2k 15mm 2 layer Engineered Board 0.118 Wm2k 20mm 2 layer Engineered Board 0.133 Wm2k

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Stair treads, stair nosings, skirtings and thresholds also available.

Oak Parquet Unfinished

Elegant, timeless, classic

Oak Parquet Flooring Unfinished The unfinished parquet blocks come in two grades: Classic and Select. Both these options require a light sand after fitting before being finished on site by a professional and will create a beautiful and timeless look for any domestic or commercial project.

Classic This grade reflects the true nature of the timber and you will see variation in colour alongside small knots in this option.

Select A cleaner, more contemporary look, with very few knots visible; much like a Prime grade.

Bespoke options - your choice of on-site finishing.

We recommend our range of Osmo hard wax oils for best results.

See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality European oak Solid boards only Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: 70mm Standard Lengths: 400mm, 500mm Thickness: 21mm TOG Rating: 20mm 1.32 TOG Heat Transfer: 20mm 0.156 Wm2k Tongue and grooved on all 4 sides, supplied square edged.

Stair treads, stair nosings, skirtings and thresholds also available.

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Oak Parquet Pre-finished

Elegant, contemporary

Oak Parquet Flooring Pre-finished Our pre-finished parquet is brushed and comes coated with the Osmo hard wax oil of your choice. Due to the brushed effect and choice of colours we offer, this is a more contemporary option than the unfinished parquet which requires on-site sanding and finishing. It can also be smoked to create more colour variation if required.

Classic This grade reflects the true nature of the timber and you will see variation in colour alongside small knots in this option.

Select A cleaner, more contemporary look, with very few knots visible – much like a Prime grade.

Bespoke options - pre-finished colours.

See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality European oak Solid boards only Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: 70mm Standard Lengths: 400mm, 500mm Thickness: 21mm TOG Rating: 20mm 1.32 TOG Heat Transfer: 20mm 0.156 Wm2k Tongue and grooved on all 4 sides, supplied with a micro bevel finish on the long side of the board.

Stair treads, stair nosings, skirtings and thresholds also available.

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Maritime Pine Smooth

Elegant, timeless, classic

Maritime Pine Flooring French maritime pine is a traditional softwood flooring option which can be considered as a cost-effective alternative to oak. As a rustic, knotty timber, French maritime pine is characterised by the attractively prominent colour variation between the redder heartwood and the cream coloured sapwood. Our pine is supplied unfinished allowing you to create your own look on site. Please note that this product is not suitable for use with underfloor heating. Available in two widths and the option of either smooth or brushed boards.

Smooth The boards are meticulously planed to produce a perfectly even, smooth look. Supplied unfinished, you have the option to finish the floor as you wish.

Bespoke options - board widths and your choice of on-site finishing. We recommend our range of Osmo hard wax oils for best results. See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality French Maritime Pine Solid boards only Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: 140mm, 200mm Standard Length: 2m - microbevel on all four sides Thickness: 21mm TOG Rating: 20mm 1.32 TOG Heat Transfer: 20mm 0.156 Wm2k Tongue and grooved on all 4 sides Stair treads, stair nosings, skirtings and thresholds also available.

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Maritime Pine Brushed

Elegant, timeless, classic

Maritime Pine Flooring French maritime pine is a traditional softwood flooring option which can be considered as a cost-effective alternative to oak. As a rustic, knotty timber, French maritime pine is characterised by the attractively prominent colour variation between the redder heartwood and the cream coloured sapwood. Our pine is supplied unfinished allowing you to create your own look on site. Please note that this product is not suitable for use with underfloor heating. Available in two widths and the option of either smooth or brushed boards.

Brushed To create a stunning texture the boards are machine brushed to remove the soft spring wood, exposing the harder summer wood with some appealing knots. This accentuates the grain and figuring and results in a beautifully textured surface. Supplied unfinished, you have the option to finish the floor as you wish.

Bespoke options - board widths and your choice of on-site finishing.

We recommend our range of Osmo hard wax oils for best results.

See www.russwood.co.uk/flooring/colour-guide

SPECIFICATION Finest quality French Maritime Pine Solid boards only Hand-selected and graded boards ensure that a consistently high quality is achieved.

Widths: 140mm, 200mm Standard Length: 2m - microbevel on all four sides Thickness: 21mm TOG Rating: 20mm 1.32 TOG Heat Transfer: 20mm 0.156 Wm2k Tongue and grooved on all 4 sides Stair treads, stair nosings, skirtings and thresholds also available.

Our floors are bespoke and made to order - we don’t stock standard ranges. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Wallgrain Fired Larch

Wallgrain Controlled burning, heat treatment and searing add a new dimension to this European Larch panelling. These innovative techniques highlight the sinuous grain pattern, warm mellow earthy tones and dark seared finishes to create dramatic effects.

SPECIFICATION Widths: 134mm, 159mm, 182mm Length: 4.0m

Fired Larch Deep earthy reds and browns are a signature feature of these panels creating a diverse play of colour. The Larch is heat treated at 190 degrees C and the surfaces are band saw cut / brushed or hacked, giving it an appearance of time past but with an improved durability rating and dimensional stability.

Thickness: 19mm

Further information is on our website www.russwood.co.uk/interiors/wall-panelling/wallgrain

If fire retardant is a requirement Wallgrain should be ordered without Universal Wax Sealant. Please call to ask advice on Fire retardants.

Our panelling is bespoke and made to order. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

Moisture content: 7% +/- 2% Tongue and Grooved on all 4 side If to be used as flooring - 2m lengths can be produced

Wallgrain Seared Larch

Wallgrain Controlled burning, smoking and searing add a new dimension to this European Larch panelling. These innovative techniques highlight the sinuous grain pattern, warm mellow earthy tones and dark seared finishes to create dramatic effects.

Seared Larch The play of colours from deep amber to burnt umber ooze decadence and exude warmth and vitality whilst the knotting is emphasized by the burnt and brushed surface. Sealed with Complex HU005 Universal Wax - a high quality, nonlayer forming, wood finishing treatment based on natural raw materials. The solvent used is an extremely pure ISOPAR fluid and particularly suitable for use in offices, hotels, care homes and nurseries.

Further information is on our website www.russwood.co.uk/interiors/wall-panelling/wallgrain

Our panelling is bespoke and made to order. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

SPECIFICATION Width: 138mm Length: 4.0m (2m lengths available on request) Thickness: 19mm Moisture content: 13% +/- 2% Tongue and Grooved on all 4 side If fire retardant is a requirement, Wallgrain should be ordered without Universal Wax Sealant. Please call to ask advice on Fire retardants.

Wallscape Fired Larch

Random textures, flowing, rugged

Wallscape The randomly formed Wallscape creates a flowing irregular wall panel that allows designers to apply a rugged natural finish.

The individual pieces can be applied in any order, helping you to create a bespoke finish every time.

Fired Larch m 0m Deep earthy reds and browns are a signature40feature of these panels creating a diverse play of colour. The Larch is heat treated at 190 degrees centigrade, improving dimensional stability for internal use. The surfaces are band saw cut, 24 but with an brushed or both giving it an appearance of time past mm mm 45 rating. improved dimensional stability and durability

SPECIFICATION The pieces of timber are various set sizes and therefore when they are arranged, a unique 3 dimensional ‘wall scape’ emerges. The pieces are easily arranged against a hidden frame, as each piece m of varying 0 mdimension and is tongue and groove on all 40 four sides.

Total Coverage of one pack = 0.8 sqm.

1 45

24 2 m mm mm mm 3.2 x 40 mm 00 m 0 0 4 4

Further information is on our website www.russwood.co.uk/interiors/wall-panelling/wallscape 45

mm

24

mm

20 mm

10 mm

2 1

Our panelling is bespoke and made to order. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

45

mm

3

24

3.2 x 40 mm

3.2 x 40 mm

mm

10 mm

10 mm

20 mm

3.2 x 40 mm

3

20 mm

20 mm 10 mm

4

Wallscape Fired Spruce

Random textures, flowing, rugged

Wallscape The randomly formed Wallscape creates a flowing irregular wall panel that allows designers to apply a rugged natural finish.

The individual pieces can be applied in any order, helping you to create a bespoke finish every time.

Fire Spruced mm The thermal treatment of the Spruce brings 4out 00 a beautiful caramel colour in the wood and the brushing accentuates the grain and therefore highlights the contrasts in the surface detail. Only after thermal treatment at 212 degrees centigrade 24 do these Spruce boards show off their wonderful hues and mm mm 45 demonstrate impressive durability. The brushed effect leaves beautiful figuring on the surface.

Further information is on our website www.russwood.co.uk/interiors/wall-panelling/wallscape

SPECIFICATION The pieces of timber are various set sizes and therefore when they are arranged, a unique 3 dimensional ‘wall scape’ emerges. The pieces are easily arranged against a hidden frame, as each piece m of varying 0 mdimension and is tongue and groove on all 40 four sides.

Total Coverage of one pack = 0.8 sqm.

1 45

24 2 m mm mm mm 3.2 x 40 mm 00 m 0 0 4 4

4 45

mm

24

mm

20 mm

10 mm

2 1

Our panelling is bespoke and made to order. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

45

mm

3

24

3.2 x 40 mm

3.2 x 40 mm

mm

10 mm

10 mm

20 mm

3.2 x 40 mm

3

20 mm

20 mm 10 mm

4

Wallscape Weathered Mixed Species Random textures, flowing, rugged

Wallscape The randomly formed Wallscape creates a flowing irregular wall panel that allows designers to apply a rugged natural finish.

The individual pieces can be applied in any order, helping you to create a bespoke finish every time.

Weathered Mixed Species m 0 m the irregular A mixture of species, reclaimed and repurposed, 40 colours and textures create a wonderfully contrasting and rugged panel. The random nature of this product will mean that no two installations will be the same, this is an upcycled 24 product, adding environmental kudos to yourmprojects. m 45

m

SPECIFICATION The pieces of timber are various set sizes and therefore when they are arranged, a unique 3 dimensional ‘wall scape’ emerges. The pieces are easily arranged against a hidden frame, as each piece m of varying 0 mdimension and is tongue and groove on all 40 four sides.

Total Coverage of one pack = 0.8 sqm.

1 45

m

24 2 m mm mm mm 3.2 x 40 mm 00 m 0 0 4 4

3

3.2 x 40 mm

Further information is on our website www.russwood.co.uk/interiors/wall-panelling/wallscape 45

mm

24

mm

20 mm

10 mm

2 1

Our panelling is bespoke and made to order. We can help and guide your choice with expert staff who are knowledgeable, experienced and very helpful - call 01540 673648.

45

mm

24

3.2 x 40 mm

mm

10 mm

10 mm

20 mm

3.2 x 40 mm

3

20 mm

20 mm 10 mm

4

Additional Information: All solid and engineered floors are made using European oak. They are supplied with a moisture content of 9%+/-2% in solid oak and 8% +/- 2% in engineered oak. Natural colour variation throughout all grades of oak is to be expected. All of our flooring is produced in a humidity controlled environment before packaging and therefore once it has left our warehouse it cannot be returned.

Smoked floors: smoking of wood is a natural reaction which takes place in the smoking kiln between ammonia and the tannic acid present in the oak. This reaction produces a deeper tone to the oak. As this is a natural reaction no influence can be made on the colour variation within the oak. Colour variation can be expected within the board and between each board.

Cross-sawn boards are hand-oiled and therefore take three weeks to fully cure. Floors should not be washed within this three week period.

Any pre-finished stair nosing’s, tread, risers and skirting are hand oiled and hand brushed therefore will not be an exact match to a machine oiled floor. Slight colour variation is to be expected.

If an unfinished floor is to be purchased and hand oiled, a machine oiled sample of flooring should not be used as comparison for colour. Hand oiling can often produce a much darker colour than expected – this is due to different methods used and application rates.

Flooring must be acclimatised before installation.

Fitters must ensure that the sub floor is dry before installation as any residual moisture will be absorbed by the floor. It is advisable that all wet trades are completed before installation. Contractors must also take precautions to protect the flooring from damage once installed. An expansion gap must be left around the perimeter of the room and in certain cases an internal expansion gap may be required. Natural seasonal movement of solid wood is to be expected – oak will expand & contract as temperature and moisture levels change. This may leave “penny” gaps between boards or cause slight cupping - this is all part of the nature of wood.

UFH - must be fully regulated and running before installation (any floor protection must be removed) and then switched off completely during installation.

1997 Multischichtdiele Z-156.607-1110

Emissions-geprüftes Bauprodukt nach DIBt-Grundsätzen

Pelican Design Consultants / www.pelican-design.com

Russwood Ltd, Station Sawmill Newtonmore, Scotland, PH20 1AR Search Russwood UK online and discover more

T: 01540 673 648  F: 01540 673 661 E: mail@russwood.co.uk www.russwood.co.uk