OUR COMPANY
Start BITÂŽ is present for over 10 years on the Romanian IT&C market with a continuous development in the distribution of communication equipment. Start BITÂŽ today - is a leading provider for the most telecom operators. The reputation as a reliable partner with a wide range of fiber optic equipment, allow us to work with internet service providers, telecommunications operators and companies installing fiber optic and interventions across the country. The equipment that we promote are supported by technical support services pre and post sale and also solutions for adaptation and implementation new technologies. We try to develop with our clients and suppliers, equipment and solutions to bring fiber closer to customers and thus access to triple play services - the new FTTx architectures (FTTH - Fiber To The Home, FTTB, FTTC) aimed, Internet / Voice / TV.
OUR COMPANY
CONTENTS
SFP/GBIC OPTICAL TRANSCEIVERS MODULES SFP DUAL FIBER/ SFP WDM
2
SFP FIBER CHANNEL
7
COPPER SFP
8
GBIC DUAL FIBER / GBIC WDM
9
COPPER GBIC
11
CSFP/ CSFP+
12
10G/16G/25G/40G/100G OPTICAL TRANSCEIVERS MODULES
The entire range of Optical Transceivers, from every category (Ethernet, Gigabit, 10G, 16G, 25G, 40G, 100G, CWDM/DWDM) and all kind of form (SFP/GBIC/SFP+/XFP/X2/XENPACK, QSFP+,) have a warranty of 3 YEARS to 7 YEARS. Start Bit guarantees that its products are free from defects under normal conditions of use. External damage or misuses are not covered by warranty. In order to benefit of warranty, there aren’t additional formalities required. It became available from the date of purchase and its certified by the invoice.
2 - 13
16 - 31
SFP+ / SFP+ WDM
16
XFP/XFP WDM
18
X2/XENPACK to SFP+ converter
20
CABLE ASSEMBLIES (DAC / AOC)
22
16G SFP+
28
25G SFP28
29
40G QSFP+ 100G QSFP28
30 31
CWDM/DWDM SOLUTIONS
34 - 41
SFP CWDM
34
GBIC CWDM
35
10G CWDM
36
SFP DWDM
38
10G DWDM
39
MUX/DEMUX CWDM
40
SFP/GBIC OPTICAL TRANSCEIVERS
SFP/GBIC TRANSCEIVERS
SFP DUAL FIBER
SFP/GBIC TRANSCEIVERS
SFP DUAL FIBER
• • • • • • • • • • • •
• • • • • • • • • • • • •
2
Product Catalog
Product Catalog
3
SFP/GBIC TRANSCEIVERS
SFP WDM
SFP/GBIC TRANSCEIVERS
SFP WDM
Ordering Information:
Ref. No. SBN-SF-WA04-002 SBN-SF-WA16-002
Fiber Type
Data Rate
Type A:1310nm
MM
Type B:1550nm
SBN-SF-WA04-020
Type A:1310nm
SBN-SF-WA16-020 SBN-SF-WA04-040 SBN-SF-WA16-040
SM
Type B:1550nm Type A:1310nm Type B:1550nm Type A:1310nm
SBN-SF-WA16-080
Type B:1550nm
SBN-SF-WC04-550
Type A:1310nm
SBN-SF-WC04-001
Type B:1490nm
MM
Type A:1310nm
SBN-SF-WC16-001
Type B:1550nm
SBN-SF-WC04-003
Type A:1310nm
SBN-SF-WC16-003
Type B:1550nm
SBN-SF-WC04-010
Type A:1310nm
SBN-SF-WC16-010
Type B:1550nm
SBN-SF-WC04-020
Type A:1310nm
SBN-SF-WC16-020
Type B:1550nm
SBN-SF-WC04-040
1.25 Gbps
SBN-SF-WC16-040 SBN-SF-WC04-040 SBN-SF-WC13-040
• • • • •
155 Mbps
SBN-SF-WA04-080
SBN-SF-WC13-550
• • • • • • • • • •
Wavelength
SM
Output Optical Power
Sensitivity
Min -20db Max -15db
-30db
Min -15db Max -8db
-29db
Min -5db Max -0db
-33db
Laser Type
2km FP/PIN
20km 20km 40km
-34db
40km 80km 80km 550m
Min -9.5db Max -3db
550m
-21db
1km FP/PIN
Min -14db Max -10db
3km
-22db
Min -9.5db Max -3db
-21db
Min -8db Max -3db
-22db
1km 3km 10km
DFB/PIN
10km
FP/PIN
20km
Type A:1310nm
Min -3db Max 2db
-23db
40km
Min -5db Max 0db
-23db
40km
Type A:1310nm
Min -3db Max 2db
-23db
40km
Type B:1490nm
Min 0db Max 5db
-23db
40km
SBN-SF-WC04-060
Type A:1310nm
Min 0db Max 5db
-26db
60km
SBN-SF-WC16-060
Type B:1550nm
Min -2db Max 3db
-24db
Min 0db Max 5db
-26db
Min 0db Max 5db
-33db
Min 2db Max 7db
-34db
SBN-SF-WC13-080
Type A:1490nm Type B:1550nm
SBN-SF-WC14-120
Type A:1510nm
SBN-SF-WC17-120
Type B:1570nm
SBN-SF-WC14-140
Type A:1510nm
SBN-SF-WC17-140
Type B:1570nm
Simplex SC/LC
20km
Type B:1550nm
SBN-SF-WC16-080
Port Type
2km
DFB/PIN Min 0db Max 5db
Distance
DFB/PIN
60km 80km 80km 120km 120km 140km 140km
• • • • •
4
Product Catalog
Product Catalog
5
SFP/GBIC TRANSCEIVERS
SFP FIBER CHANNEL
SFP WDM FIBER CHANNEL
SFP/GBIC TRANSCEIVERS
• • • • • • •
• • • • • • • • •
• •
• • •
• •
Ordering Information: Dis
• • • • •
6
Product Catalog
Product Catalog
7
SFP/GBIC TRANSCEIVERS
Copper SFP
GBIC
DUAL FIBER
SFP/GBIC TRANSCEIVERS
• • • • • • • • • •
• • • • • • • • • • • • •
• • • • •
• • •
• • • • •
8
Product Catalog
Product Catalog
9
SFP/GBIC TRANSCEIVERS
• • • • • • • • • •
GBIC WDM
SFP/GBIC TRANSCEIVERS
Copper GBIC
• • • • • • • •
• • • •
• • •
Ordering Information:
• • • • •
10
Product Catalog
Product Catalog
11
CSFP TRANSCEIVERS
CSFP +
CSFP
Description:
Description:
Compact small form-factor pluggable CSFP transceiver supports network systems, especially those deploying single-fiber bidirectional transceivers in high density applications. The CSFP MSA defines a transceiver mechanical form-factor with latching mechanism and a host board, SFP-like, electrical edge connector and cage. The CSFF MSA also defines a transceiver mechanical form-factor. The dual-channel CSFP has the same mechanical dimensions as the industrystandard SFP transceiver and is compatible with the standard SFP cage. The single-channel CSFP and CSFF are half the size of the industry-standard SFP and SFF packages. The CSFP design is modular to enable configurations of integrated 2ch modules.
Compact small form-factor pluggable CSFP+ transceiver and a compact small form-factor CSFF+ transceiver supports network systems, especially those deploying single-fiber bidirectional transceivers in high density 4G/6G/8G/10G applications. The CSFP+ design is modular to enable configurations of integrated 2ch modules in one SFP+ cage.
Features:
Features:
• • •
• • • • • • • •
• • • •
Support up to 1.25Gbps Data Links Single 3.3V Power supply and TTL Logic Interface 2XBi-directional transceivers in 1 Compact SFP transceiver package Class 1 FDA and IEC60825-1 Laser Safety Compliant Operating Case Temperature Standard: 0~+70C / Industrial -40~+85C Compliant with CSFP MSA Option 2 or Option 1 Compliant with Digital Diagnostic Monitor Interface SFF-8472
• • •
Operation Data Rate Up To 10.3125Gbps 1270nm DFB TX/1330nm RX with CH1 1330nm DFB TX/1270nm RX with CH2 15km with 9/125 μm SMF Single 3.3V Power supply and TTL Logic Interface 2XBi-directional transceivers in 1 SFP+ transceiver package Class 1 FDA and IEC60825-1 Laser Safety Compliant Operating Case Temperature: Standard: 0C~+70C/ Industrial: -40C~+85C Compliant with CSFP MSA Option 2 The Mechanical Dimensions Compliant With SFP MSA Compliant with Digital Diagnostic Monitor Interface SFF-8472
Applications:
Applications:
• • •
• • •
Fiber Channel Links Gigabit Ethernet (1000Base-BX) Point to Point FTTH Application
Ref. No.
Fiber Type
Data Rate (TX/RX)
Wavelength (TX/RX)
Laser Type
Distance
SBN-CF-0413-A10
1310/1490nm
10km
SBN-CF-1304-A10
1490/1310nm
10km
SBN-CF-0416-A10
1310/1550nm
10km
SBN-CF-1604-A10
1550/1310nm
10km
1310/1490nm
20km
SBN-CF-1304-A20
1490/1310nm
20km
SBN-CF-0416-A20
1310/1550nm
20km
155 Mbps
SBN-CF-0413-A20
SBN-CF-1604-A20
1550/1310nm
SM
FP/PIN
1310/1490nm
SBN-CF-1304-C10
1490/1310nm
10km
SBN-CF-0416-C10
1310/1550nm
10km
1550/1310nm
10km
1310/1490nm
20km
SBN-CF-1304-C20
1490/1310nm
20km
SBN-CF-0416-C20
1310/1550nm
20km
SBN-CF-1604-C20
1550/1310nm
20km
SBN-CF-0413-C20
Product Catalog
1.25 Gbps
10km
Fiber Channel Links 10GBASE-LR at 10.31Gbps Other optical links
Port Type
Ref. No. SBN-CP-0205-D15
20km
SBN-CF-0413-C10
SBN-CF-1604-C10
12
CSFP+ TRANSCEIVERS
LC
SBN-CP-0502-D15
Fiber Type
Data Rate (TX/RX)
SM
14.025Gbps
Wavelength (TX/RX) 1270/1330nm 1330/1270nm
Laser Type DFB
Distance
Port Type
15km 15km
LC
Product Catalog
13
10G/
16G/ 25G
40G/ 100G
OPTICAL TRANSCEIVERS With data traffic volume increasing by around 40% each year, the prevailing 10 Gb/s optical networks are quickly becoming saturated. As the long-haul technology research tries to avert the ‘capacity crunch’ with novel fibers, advanced optical components and sophisticated digital signal processing, the change in technology for metro networks, enterprise and datacenters has to be smooth yet swift. For the roadmap to 100G metro networks, economic viability is of paramount importance together with greater space, power and bandwidth efficiency. It is essential that the upgrade takes advantage of the current infrastructure with minimal disruption to existing services and is inherently flexible to further accommodate newer equipment as per demand.
The rapidly increasing traffic demand will soon make the operators face the age old problem: lease more dark fibers or find a way to increase capacity of the existing fibers. With the growing developments in the 100G transceiver technology and the rise in interest for installing 100G products, the metamorphosis of current network architecture to 100G systems is inevitable and only a matter of time. This paper, thus, delves into the 100G technologies and network solutions supporting seamless evolution to 100G while easily coexisting with previous 10G services. However, as outlined, care must be taken to limit disruption of the existing 10G services while maximizing reuse of existing equipment.
10G TRANSCEIVERS
10G SFP+ WDM
10G SFP+
• • • • • • • • • • •
• • • • • • • • • •
10G TRANSCEIVERS
One Fiber Bi-Di SFP+ Optical Transceiver, Bidi WDM SFP+ Up to 10.3 Gbps Bi-directional Data Links Fully Compliant with SFP+ MSA Compliant to IEEE 802.3ae 10GBASE-BX SFF-8472 Digital Diagnostic Function Simplex LC Connector Only Required +3.3 V Power Supply RoHS Compliant -5°C to 70°C Operating Temperature Operating Humidity: 10% to 90% Non-Condensing
• • • • •
SBN-SP-WD02-060
-21db
DFB/APD
60km
SBN-SP-WD05-060
-21db
DFB/APD
60km
• • • SBN-SP-SD16-100
1550nm
Min 0db Max 5db
-23db
EML/APD
100km
• •
•
16
Product Catalog
Product Catalog
17
10G TRANSCEIVERS
10G XFP WDM
10G XFP
10G TRANSCEIVERS
•
• • • • • • • •
• • • • • • • • •
• • • • •
• • •
• • • •
Wave
• • • • • SBN-XP-WD16-100
1550nm
Min 0db Max 4db
-24db
EML/APD
100km
•
18
Product Catalog
Product Catalog
19
10G TRANSCEIVERS
10G CONVERTER
10G CONVERTER
10G TRANSCEIVERS
• • •
• • • • • • • •
Applications: • • •
20
Product Catalog
Product Catalog
21
CABLE ASSEMBLIES
Description:
Description:
The Copper SFP+ Cable assemblies are high-performance, cost effective I/O solutions for 10 GB Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufacturers to achieve high port density, configurability and utilization at a very low cost and to reduce power budget. The high-speed cable assemblies meet and exceed the performance and reliability requirements stipulated by Gigabit Ethernet and Fiber Channel industry standard.
The SFP+ Active Optical Cable (AOC) is a 10Gbps solution to10G Ethernet, and high-performance computing applications. The integrated cable transmits 10Gbps data in each direction over a loose tube fiber with distance up to 100m. The AOC is SFP+ MSA compliance, low power consumption and lightweight.
Features:
Features:
• • • • • • • • • •
• • • • • • • • • • • •
Supports 1Gb/s to 10.5Gb/s bit rates Support 1x, 2x, 4x and 8x Fiber Channel data rates Hot-pluggable SFP 20PIN footprint AC coupling of PECL signals Improved Pluggable Form Factor (IPF) compliant for enhanced EMI/EMC performance Lower Power Consumption< 0.5W Power Supply: +3.3V Compatible to SFP+ MSA RoHS-6 compliance Operating Case Temperature: 0°C to +70°C
10Gb/s serial optical interface 850nm high-speed VCSEL and PIN receiver Support 10Gb/s transmission distance up to 100 meters with OM2 MM fiber Single 3.3V power supply Mechanical specifications compliant with SFF-8432 Electrical specifications compliant with SFF-8431 Support digital diagnostics monitoring for module temperature, Vcc, Rx input power, Tx_Disable and Rx_LOS Typical power consumption 200mW I2C communication bus Hot pluggable RoHS-6 compliance Operating Case Temperature: -5°C to +75°C
Applications:
Applications:
•
• •
• • • •
Storage Area Networks (SAN), Network Attached Storage and Storage Servers 1G/2G/4G/8G Fiber Channel Switched fabric I/O Data center cabling infrastructure Hubs, switches, routers, servers, NICs
•
10G Ethernet Datacom and Telecom switch or router backplane connection High performance computing interconnect
Ref. No.
AWG**
Data Rate
DAC Length*
Data Interface
Ref. No.
Fiber Type
Data Rate
Wavelength
AOC Length*
Data Interface
SBN-SP-TWOC-XXX*
30
10Gbps
0.5m - 15m
COPPER
SBN-SP-SAOC-XXX*
MM
10Gbps
850nm
1m - 100m
AOC
Notes: *Length measured. XXX denotes the DAC length with unit meter. For example, 001 denotes 1m, 002 denote 2m, etc. **AWG - American wire gauge - wire diameter size. AWG 30 = 0,255 mm.
22
CABLE ASSEMBLIES
SFP+ AOC ACTIVE OPTICAL CABLE
SFP+ DAC DIRECT ATTACH CABLES
Product Catalog
Notes: *Length measured OM2 fiber. XXX denotes the AOC length with unit meter. For example, 001 denotes 1m, 002 denote 2m … 099 denote 99m and 100 denotes 100m.
Product Catalog
23
CABLE ASSEMBLIES
Description:
Description:
The Copper QSFP+ Cables is 40GBASE QSFP+ to QSFP+ direct-attach Cable. They are based on the QSFP+ Multi Source Agreement (MSA), and offer customers a wide variety of high-density 40 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider transport applications.
The QSFP Active Optical Cable (AOC) is a high performance integrated cable for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10 Gbps with lengths ranging from one to 100 m. These Active Optical Cables utilize multimode fiber using a nominal wavelength of 850nm.
Features:
Features:
• • • • • • • • • • •
• • • • • • • • • • • • •
Fully compatible with IEEE802.3ba and Infiniband QDR specifications Allows for 10Gb/s per channel transmission; aggregate of 40 Gb/s total bandwidth Robust diecast covers for superior EMI shielding effectiveness EEPROM for cable signature & system communications Actively equalized cables enable longer cable lengths or the use of smaller cable diameters for shorter cable lengths 30 AWG cable sizes available 100 ohm differential impedance system Optimized PCB interface board to minimize crosstalk and insertion loss Lower Power Consumption< 1.5W Temperature Range: 0°C to +70°C RoHS6 Compatible
Full Duplex 4 Channel 850nm Parallel Active Optical Cable Supports transmission rates up to 14 Gbit/s per channel QSFP-based modules at each cable end QSFP interfaces fully compliant to SFF- 8436 Hot pluggable electrical interfaces QSFP-based module supports Rx Pre-Emphasis EEPROM-based Serial-ID, accessible through two-wire Serial Interface Multi-channel 850nm VCSEL array Multi-channel PIN-detector array Helix type 8-fiber Multi-Mode Optical cable that allows for bending in any direction Low power QSFP module: 0.8 Watts (typ.) per end 0°C to +70°C operating case temperature Laser Class 1 IEC/CDRH compliant
Applications:
Applications:
• • • • • •
•
Servers Networked storage systems Routers External storage systems High Performance Computing (HPC) applications Data Center networking
• • • •
InfiniBand QDR (4 x 10G), DDR (4 x 5G) and SDR (4 x 2.5G) interconnects High Performance and High Productivity computer interconnects Data Aggregation, Backplane and Proprietary Density Applications PCI-Express, SAS/SATA, Fibre Channel compatible interconnect Datacom and Telecom switch and router backplane connections
Ref. No.
AWG**
Data Rate
DAC Length*
Data Interface
Ref. No.
Fiber Type
Data Rate
Wavelength
AOC Length*
Data Interface
SBN-SP-TQOC-XXX*
30
40Gbps
0.5m - 7m
COPPER
SBN-SP-MAOC-XXX*
MM
40Gbps
850nm
1m - 100m
AOC
Notes: *Length measured. XXX denotes the DAC length with unit meter. For example, 001 denotes 1m, 002 denote 2m, etc. *AWG - American wire gauge - wire diameter size. AWG 30 = 0,255 mm.
24
CABLE ASSEMBLIES
QSFP+ AOC ACTIVE OPTICAL CABLE
QSFP+ DAC DIRECT ATTACH CABLES
Product Catalog
Notes: *Length measured OM2 fiber. XXX denotes the AOC length with unit meter. For example, 001 denotes 1m, 002 denote 2m … 099 denote 99m and 100 denotes 100m.
Product Catalog
25
CABLE ASSEMBLIES
Description:
Description:
The 100G QSFP28 Twinax DAC Copper Cable assemblies are high-performance, cost effective I/O solutions for 100 GB Ethernet and OTU4 applications.
The QSFP28 Active Optical Cable is a 4-channel optical transceiver, which conforms to QSFP28 MSA and works at the rage of 25Gbps per channel. The AOC conforms to transmission speed required by InfiniBand™ EDR, 100 Gigabit Ethernet (100GBASE-SR4) and enables to transmit maximum 100m. Best for close-range high-speed transmission, for example, between server racks, between servers.
Features:
Features:
• • • • • • • • •
• • • • • •
Supports 103.125Gb/s and 118.3Gb/s bit rates Lower Power Consumption 30AWG up to 3 meters distance 26AWG up to 4 meters distance CDR Inside Power Supply: +3.3V Compatible to CFP / CFP2 / CFP4 MSA Temperature Range: 0~ 70C RoHS6 Compliant
Compliant to the IEEE 802.3bm(100GBASE-SR4) Compliant to the SFF-8665 Specification Active Optical Cables Length up to 70m VCSEL array transmitter and PIN array receiver Low Power dissipation <3.5W Operating Case Temperature: 0°C to +70°C
Applications:
Applications:
• • •
•
OTU4 100GBASE-LR4 Ethernet Data center
100G BASE SR4 Ethernet interconnects
Ref. No.
AWG**
Data Rate
DAC Length*
Data Interface
Ref. No.
Fiber Type
Data Rate
Wavelength
AOC Length*
Data Interface
SBN-SP-TQOC-XXX*
30
100Gbps
0.5m - 3m
COPPER
SBN-CP-MAOC-XXX*
MM
100Gbps
850nm
1m - 70m
AOC
Notes: *Length measured. XXX denotes the DAC length with unit meter. For example, 001 denotes 1m, 002 denote 2m, etc. *AWG - American wire gauge - wire diameter size. AWG 30 = 0,255 mm.
26
CABLE ASSEMBLIES
QSFP28 AOC ACTIVE OPTICAL CABLE
QSFP28 DAC DIRECT ATTACH CABLES
Product Catalog
Notes: *Length measured OM2 fiber. XXX denotes the AOC length with unit meter. For example, 001 denotes 1m, 002 denote 2m … 099 denote 99m and 100 denotes 100m.
Product Catalog
27
16G SFP+ TRANSCEIVERS
16G SFP +
25G SFP28
Description:
Description:
Start Bit offers SFP+ 16G, SFP 16G fibre channel transceivers that are SFP compliant. This fibre channel transceiver solution supports high-speed serial links over multimode optical fiber at signaling rates up to 14.025 GBd.
The SFP28 optical transceivers are designed for use in 25/28G Gb/s data rate over multimode or single model fiber. They are compliant to IEEE 802.3by, SFF-8472 Rev 12.2 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.
Using the 2-wire serial interface defined in the SFF-8472 MSA, these 16G fibre channel transceivers provide real-time temperature, supply voltage, laser bias current, laser average output power and received input power. Compliant with Small Form Pluggable (SFP) Multi Source Agreement (MSA) mechanical and electrical specifications for LC Duplex transceivers, ANSI Fibre Channel transceiver for FC-PI-5 and FC-PI-2 gigabit applications.
SFP28 is a 25GBASE interface which has evolved from 100 Gigabit Ethernet, which is typically implemented with 4 × 25 Gbit/s data lanes. Identical in mechanical dimensions to SFP and SFP+, SFP28 implements one 28 Gbit/s lane for top-ofrack switch to server connectivity.SFP28 may also be used to “break out” a single 100GbE port in a top-of-rack switch into four 25 Gbit/s individual server connections. SFP28 functions with both optical and copper interconnects
Features:
Features:
• • •
• • • • • • • • • • • • • • •
• • • • • • • • • • • • • •
Compliant to Restriction on Hazardous Substances (RoHS) directive Diagnostic features per SFF-8472 “Diagnostic Monitoring Interface for Optical Transceivers” Real time monitoring of: Transmitted optical power; Received optical power; Laser bias current; Temperature; Supply voltage SFP Plus Mechanical forfactor Wide temperature and supply voltage operation (-0°C to 70°C) (3.3 V ± 5%) Transceiver specifications per SFP (SFF-8074i) Multi-Source Agreement and SFF-8472 (revision 10.0) 14.025GBd Fibre Channel operation for FC-PI-5 1600 M5E-SN-I, FC-PI-5 1600-M5E-SN-I, FC-PI-5 1600 M5F-SN-I 8.5 GBd Fibre Channel operation for FC-PI-4 800-M5-SN-S, 800-M6-SN-S and 800-M5E-SN-I 4.25 GBd Fibre Channel operation for FC-PI400-M5-SN-I , 400-M6-SN-I and 400 M5E-SN-I Link lengths at 14.025 GBd: 125m with 50µm OM4, 100M with 50µm OM3, 35m with 50µm OM2, 15m with 62.5µm OM1 Link lengths at 8.5 GBd: 21m with 62.5µm OM1, 50m with 50µm OM2, 150m with 50µm OM3 Link lengths at 4.25 GBd: 70m with 62.5µm OM1, 150m with 50µm OM2, 380m with 50µm OM3 Link lengths at 2.125 GBd: 150m with 62.5µm OM1, 300m with 50µm OM2, 500m with 50µm OM3 LC Duplex optical connector interface conforming to ANSI TIA/EIA604-10 (FOCIS 10A) 850 nm Vertical Cavity Surface Emitting Laser (VCSEL) source technology IEC 60825-1 Class 1/CDRH Class 1 laser eye safe Enhanced EMI performance for high port density applications
Applications: •
Tri-Rate 4.25/8.5/14.025 Gb/s Fibre Channel
Ref. No.
Fiber Type
SBN-SP-MH01-100
MM
SBN-SP-SH01-010 SBN-SP-SH04-020
28
25G SFP28 TRANSCEIVERS
Product Catalog
SM
Data Rate
14.025Gbps
Wavelength
Laser Type
Distance
850nm
VCSEL
100m
DFB
10km
DFB
20km
1310nm
Port Type
Duplex LC
Up to 25.78, 27.95, 28.05 Gb/s bi-directional data links Build-in CDR Hot-pluggable SFP+ footprint Built-in digital diagnostic functions 850nm Oxide VCSEL laser transmitter for MM and 1310nm DFB laser transmitter for SM Duplex LC connector RoHS compliant 10 km on 9/125μm SM 100m over M5F MMF (50/125μm OM4) 70m over M5E MMF (50/125μm OM3) 20m on MMF (50/125μm OM2) Metal enclosure, for lower EMI 1.2W maximum power consumption Single 3.3V power supply Operating temperature range: 0°C to 70°C
Applications: • • • •
25.78 Gb/s single lane 100GE SR4 OUT4 32GFC CPRI Option 10
Ref. No.
Fiber Type
Data Rate
Wavelength
Laser Type
Distance
SBN-SP-MI01-100
MM
24.33Gb/25.78Gb
850nm
VCSEL
70/100m
DFB
10km
DFB
10km
SBN-SP-SI01-I10 SBN-SP-SI04-L10
SM
24.33Gb/25.78Gb 27.95Gb/28.05Gb
1310nm
Port Type
Duplex LC
Product Catalog
29
40G QSFP+ TRANSCEIVERS
40G QSFP +
100G SFP28 TRANSCEIVERS
100G SFP28
Description:
Description:
The QSFP+ (Quad Small Form-factor Pluggable Plus) is a new Multi-Source Agreement (MSA) for high speed application, such as 40GBASE, which provide four channels of data in one pluggable interface. Each channel is capable of transferring data at 10Gbps and supports a total of 40Gbps.
The QSFP28 Optical transceiver module is designed for use in 103 Gigabit Ethernet links over 100m for multimode fiber and 2km and 10Km single mode fiber. They are compliant with the IEEE 802.3ba. Digital diagnostics functions are available via an I2C interface
The 40Gbps QSFP+ transceiver is well suited for Infiniband and 40GBASE-SR4 / 40GBASE-LR4 applications. It combines the higher density attractions of parallel modules with some of the key advantages normally associated with SFP+ based modules. It is intended for use short reach applications in switches, routers and data center equipment where it provides higher density and lower cost when compared with standard SFP+ modules.
Features:
Features: • • • • • • •
QSFP+ MSA, SFF-8436 compatible Four independently addressable transmit and receive channels Highly compact: savings of 60% on edge and board usage compared to four comparable SFP+ modules Electrically hot-pluggable XFP-like latch mechanism for ease-of-insertion Digital Diagnostics Monitoring Interface. allows customer management and monitoring of key modules parameters, analogous to SFP+ Optical connectivity via industry standard MPO/MTP terminated fiber ribbon
Supports 103.1Gbps aggregate bit rates Single 3.3V Power Supply and Low Power dissipation Up to 100m transmission on MMF OM4 and 10km/2km over SMF. Hot-Pluggable QSFP Footprint Class 1 FDA and IEC60825-1 Laser Safety Compliant RoHS6 Compliant Operating Case Temperature Standard: -5°C to 75°C Compliant with QSFP MSA Specification I2C interface with integrated Digital Diagnostic Monitoring 4x25G electrical interface
Applications:
Applications:
•
•
• • • • • • • •
High-speed interconnects within and between switches, routers and transport equipment Server-Server Clusters, Super-computing interconnections Proprietary backplanes Interconnects rack-to-rack, shelf-to-shelf, board-toboard, board-to-optical backplane 40GBASE-LR4 Ethernet links 10GBASE-SR applications 40GBASE-SR4 applications 40GBASE-ER4 Ethernet links InfiniBand SDR, DDR and QDR applications
Ref. No. SBN-SP-MQ01-150 SBN-SP-MQ01-300
Fiber Type
SBN-SP-MQCW-020 SBN-SP-MQCW-040
Product Catalog
Data Rate
MM
SBN-SP-MQCW-010
30
• • • • • • • • • •
40Gbps SM
• • • • • • •
High-speed interconnects within and between switches, routers and transport equipment Server-Server Clusters, Super-computing interconnections Proprietary backplanes Interconnects rack-to-rack, shelf-to-shelf, board-toboard, board-to-optical backplane 100GBASE-LR4 Ethernet links 100GBASE-SR4 applications 100GBASE-LR4 Lite 2km applications OUT4
Wavelength
Laser Type
Distance
Port Type
Ref. No.
Fiber Type
850nm
VCSEL
150m
MPO/MTP
SBN-SP-MX01-100
MM
850nm
VCSEL
300m
MPO/MTP
CWDM
DFB
10km
LC
CWDM
DFB
20km
LC
CWDM
DFB
40km
LC
SBN-SP-SX04-002 SBN-SP-SX04-010
Data Rate
100Gbps SM
Laser Type
Distance
Port Type
VCSEL
70m OM3 100m OM4
MPO
DFB
2km
LC
DFB
10km
LC
Product Catalog
31
CWDM/DWDM SOLUTION
SFP CWDM
CWDM/DWDM SOLUTION
CWDM/DWDM SOLUTION
GBIC
CWDM
Single-Mode CWDM 1.25Gbps FC/GBE Duplex GBIC Transceiver
• • • • • •
• • • • • • • • •
• • •
• • • • • • • • • •
• •
34
Product Catalog
Product Catalog
35
CWDM/DWDM SOLUTION
10G CWDM
10G CWDM
CWDM/DWDM SOLUTION
Features: • •
• • • •
• •
• • • • • • • • • • •
• • •
• • •
• • • • • •
• • • • • • •
36
Product Catalog
Product Catalog
37
CWDM/DWDM SOLUTION
SFP DWDM
10G DWDM
CWDM/DWDM SOLUTION
• • • • • • • • • • • • • • • • • • • •
Applications: • • •
• •
• • •
•
38
Product Catalog
Product Catalog
39
CWDM/DWDM SOLUTION
MUX/DEMUX CWDM
CWDM/DWDM SOLUTION
MUX/DEMUX CWDM
• •
• • •
• • • •
40
CWDM SFP TX/RX: 1470nm
CWDM SFP TX/RX: 1470nm
CWDM SFP TX/RX: 1490nm
CWDM SFP TX/RX: 1490nm CWDM SFP TX/RX: 1510nm
CWDM SFP TX/RX: 1510nm CWDM SFP TX/RX: 1530nm
Product Catalog
• • •
MUX DEMUX 8 CH
2 fibers
MUX DEMUX 8 CH
CWDM SFP TX/RX: 1530nm
CWDM SFP TX/RX: 1550nm
CWDM SFP TX/RX: 1550nm
CWDM SFP TX/RX: 1570nm
CWDM SFP TX/RX: 1570nm
CWDM SFP TX/RX: 1590nm
CWDM SFP TX/RX: 1590nm
CWDM SFP TX/RX: 1610nm
CWDM SFP TX/RX: 1610nm
•
Product Catalog
41
CWDM/DWDM SOLUTION
42
Product Catalog
CWDM SPECIFICATIONS
CWDM SPECIFICATIONS
CWDM/DWDM SOLUTION
Product Catalog
43
CWDM/DWDM SOLUTION
44
Product Catalog
DWDM SPECIFICATIONS
DWDM SPECIFICATIONS
CWDM/DWDM SOLUTION
Product Catalog
45
NOTES
NOTES
NOTES