Partially Paradoxist Smarandache Geometries by Ryan Elias

PartiaDy Paradoxist Smarandache Geometries Howard Isen Department of Mathematics and Computer Infonnation Science Mansfield University Mansfield, PA 16933 hiseri@mnstJd.edu Abstract: A paradoxist Smarandache geometry combines Euclidean, hyperbolic, and elliptic geometry into one space along with other non-Euclidean behaviors oflines that would seem to require a discrete space. A class of continuous spaces is presented here together with specific examples that emibit almost all of these phenomena and suggest the prospect of a continuous paradoxist geometry. Introduction Euclid's parallel postulate can be fonnulated to say that given a line 1 and a pointP not on I, there is exactly one line through P that is paral1e1 to I. An axiom is said to be Smarandacbely denied, if it, or one of its negations, holds in some instances and fails to hold in others within the same space. For example, Euclid's parallel postulate would be Smarandachely denied in a geometry that was both Euclidean and nonEuclidean, or non-Euclidean in at least two different ways. A Smarandache geometry is one that has at least one Smarandachely denied axiom, and a paradoxist Smarandache geometry, to be described later, denies Euclid's parallel postulate in a somewhat exhaustive way. Euclid's parallel postulate does not hold in the standard non-Euclidean geometries, the hyperbolic geometry of Gauss, Lobachevski, and Bolyai and the eIliptic geometry of Riemann. These are special cases of the two-dimensional manifolds of Riemannian geometry. Here the three types of geometry are characterized by the Gauss curvature, negative curvature for hyperbolic, zero curvature for Euclidean, and positive curvature for elliptic. In general. the curvature may vmy within a particular Riemannian manifold, so it is possible that the geodesics, the straightest possible curves, will behave like the lines of Euclidean geometry in one region and like the lines of hyperbolic or elliptic geometry in another. We would expect, therefore, to find geometries among the Riemannian manifolds that Smarandachely deny Euclid's parallel postulate. The models presented here wil1 suggest specific examples, but explicit descriptions would be far

from trivial. We wiII bypass the computational complexities of Riemannian manifolds by turning to a class of geometric spaces that we will call Smarandache manifolds or S-rnanifolds. S-manifolds are piecewise linear manifolds topologically, and they have geodesics that exhibit elliptic, hyperbolic. and Euclidean behavior similar to those in Riemannian geometry, but that are much easier to construct and describe. The idea of an S-manifold is based on the hyperbolic paper described in [2J and credited to W. Thurston. There, the negative curvature of the hyperbolic plane is visualized by taping together seven triangles made of paper (see Figures 28 and 2b).Squeezing seven equilateral triangles around a vertex, instead of the usual six seen in a tiling of the plane, forces the paper into a flat saddle shape with the negative curvature concentrated at the center vertex. By utilizing these "curvature singularities," our S-manifolds can be flat (i.e., Euclidean) everywhere else. Smaraudache maaifolds A Smaraudacbe manifold(or S-manifokt is a collection 0 f equilateral triangular disks (triangles) where every edge is shared by exactly two triangles, and every vertex is shared by five, six, or seven triangles. The points of the manifold are those of the triangular disks, including all the interior points, edge points, and vertices. Lines (geodesics) in the manifold are those piecewise linear curves with the following properties. They are straight in the Euclidean sense within each triangular disk and pair of adjacent triangular disks (since two triangles will lie flat in the plane). Across a vertex, a line will make two equal angles (two 150" angles for five triangles, two 180" angles for six triangles, and two 210" angles for seven). EUiptic Vertices - five triangles

There are five equilateral triangles around an elliptic vertex in an S-manifold. We can take a region around an elliptic vertex and lay it flay by making a cut as in Figure la. Note that the lines are straight within any pair of adjacent triangles, although the lines appear to bend at the vertex and across the cut This is only because we have made a cut and flattened the surface. In the paper model shown in Figure 1b, the lines curve, but only in a direction perpendicular to the surface. In other words, the lines are as straight as possible and bend only as they follow the surface. The two lines that do not pass through the central vertex pass through three adjacent triangles, which would lie flat in the plane, and so are straight in the Euclidean sense. Note that the fact that the third triangle is shared by both lines forces them to intersect The middle line runs along an edge of a triangle and passes through an elliptic vertex, so it bisects the opposite triangle making two 150" angles (or two-and-a-halftriangles). In general, lines passing on either side of an elliptic vertex will turn towards each other.

FigureS I a and 1b. Lines near an elliptic vertex.

Hyperbolic Vertices - seven triangles There are seven triangles around a hyperbolic vertex. We can lay a region around a hyperbolic vertex flat after making cuts as shown in Figure 2a. The middle line runs along an edge, so it bisects the opposite triangle (and has 210", or three-and-a-halftriangles, on either side of it). The two lines on either side pass through three adjacent triangles, and are straight as in the elliptic case. Note that the third triangles here are separated by another triangle, so lines passing on either side of a hyperbolic vertex tum away from each other.

Figures 2a and 2b. Lines near a hyperbolic vertex.

Paradoxist geometries We will say that a pointP not on a line 1 is Euclidean with respect to I, if there is exactly one line through P that is paralJel to I. P is elliptic with respect to I, ifthere are no parallels throughP. If there are at least two paralJels throughP, then it is hyperbolic. Furthennore, if P is hyperbolic with respect to I, then it is finitely hyperbolic, ifthere are only finitely many parallels, and it is regularly hyperbolic, if there are infinitely many parallels and infinitely many non-parallels. Finally, if there are infinitely many paralJels and only finitely many non-parallels, then P is extremely hyperbolic, and if all the lines through P are parallel, then P is completely hyperbolic. Smarandache called a geometry ptradoxist if there are points that are elliptic, Euclidean, finitely hyperbolic, regularly hyperbolic, and completely hyperbolic (I). We will add extremely hyperbolic to the definition of a paradoxist geometry. We will also say that a geometry is semi-paradoxist, if it has Euclidean, elliptic, and regularly hyperbolic points, and if it lacks only finitely hyperbolic points we will call it almost paradoxist A Semi-Paradom Model This model is constructed by taking a hyperbolic and an elliptic vertex adjacent to each other and surrounding them with Euclidean vertices to form a space that is topologicalJy equivalent to the plane. A part of it is shown in Figures 3a and 3b. Let I be the line through O. With respect to I, we see that the point P is Euclidean. The line through P shown is parallel to I, and any other line through P clearly intersects I, since the region to the right and left is essentially Euclidean. The point Q is elliptic with respect to I. The line shown intersects I, as would any other line through Q. The point R is regularly hyperbolic. The lines shown are parallel to I, and these separate the other infinitely many parallels from the infmitely many non-parallels. This S-manifold can be turned into a Riemannian manifold by smoothing the two curvature singularities. The lines shown in Figures 3a and 3b would stay the same, and only those geodesics passing near the singularities would be affected by the change.

Figure 3a. Lines in the semi-paradoxist model.

Figure 3b. Lines in the sem-paradoxist model.

An Almost Paradoxist Model A greater variety in the types of hyperbolic points can be found in an S-manifold with more hyperbolic vertices. This model has at its center an elliptic vertex surrounded by five more elliptic vertices. Five Euclidean vertices then surround these el1iptic vertices (see Figures 4a and 4b) to form a cylinder with a cone on top ofit. We will caU this the silo.

The line I runs around the cylinder (it is a circle). With respect to the line I, the pointP is Euclidean, and the point R is elliptic.

z Figure 4a Lines in the silo of the almost paradoxist model.

Figures 4b and 4c. Lines in the silo of the almost paradoxist model, and the hyperbolic region around silo.

The entire model is topologically equivalent to the plane, and is completed by extending the bottom of the silo with hyperbolic vertices. A model made ofZAKS bloclcs in Figure 4c shows some of the hyperbolic region extending from the bottom of the silo. Examples of various types of hyperbolic points are shown in Figures Sa and Sb, which shows some of the hyperbolic region and the bottom of the silo. The line l mentioned previously is at the top. With respect to l, the point Q is regularly hyperbolic. The two lines shown are parallel to l, and they separate the parallels from the non-parallels. Out further into the hyperbolic region is the point Q . The line shown passing through Q and the vertex I intersects I. Any line through Q that misses the vertex I will lie outside of the two dotted lines, and these will miss the silo entirely. Since only one line through Q intersects l, it is an extremely hyperbolic point. The nearby point Q is completely hyperbolic. We can see this by noticing that and I will follow the dotted line to the left and miss the silo. All the lines through Q to the line through Q the left of this will also miss the silo. Any line to the right will miss the vertex I, and will run just to the right of the line through Q and I until it misses the vertex F and turns to the right. These lines will also miss the silo.

Figure Sa. Lines in the hyperbolic region near the silo in the almost paradoxist model.

Figure 5b. Lines in the hyperbolic region near the silo in the almost paradoxist model. Since this model has elliptic, Euclidean, regularly"hyperbolic, extremely hyperbolic, and completely hyperbolic points, it is almost paradoxist. Note that it follows from the existence of extremely and " completely hyperbolic points that there are pairs of points that do not lie on a single line. This model is connected, however, and there is always a finite sequence ofline segments that connect any particular pair of points. F1ual Remarks It is relatively easy to construct an S-manifold that is almost paradoxist. The most interesting prospect, however, is the possibility of an S-manifold with a finitely hyperbolic point. Intuition strongly suggests that a finitely hyperbolic point could only exist in a discrete space and not in a continuous space like an Smanifold. A peculiar property of lines in an S-manifold, however, is that a line that passes through a hyperbolic vertex is isolated from lines that are nearby (see Figure 2a). This ability to isolate lines suggests that it may be possible to construct an S-manifold with a finitely hyperbolic point. References l. Chimienti, S. and Bencze, M .. Smarandache paradoxist geometry, www.gallup.unm.edul-smarandachelprd-geel.txt. 2. Weeks., J., The Shape o/Space, Marcel Dekker, New York, 1985. Acknowledgements Thanks to the Yahoo Smarandache Geometry Club for the interesting discussions and ideas that lead to this paper.

Thanks also to Ken Sullins for introducing me to ZAKS blocks and letting me play with his. Ohio Art's ZAKS blocks were very important in the development and presentation of these models.