MATERIALS AND FINISHES BLD60704
SALSABILA DAFIKA PUTRI SEMESTER 2 0339740
TASK 1A - CUSHION SOFA BED 1900MM(W) X 896MM(L) X 821MM (H) THREE SEAT SOFA BED IN BROWN MICROFIBER FABRIC FINISH C/W 110MM(W) X 60MM(L) X 150MM CURVED STEEL LEG IN GLOSS FINISH.
MICROFIBER FABRIC
CUSHION FRAMEWORK
STEEL
MECHANISM FOR SOFA BED
Description It is a three seat sofa bed that is made out of cushion in brown microfiber fabric finish. A cushion couch can gives more comfort as it can forms to the exact body shape while giving proper support that can helps the body to develop a better natural posture. It also gives less compression on the hips, spine, and tailbone that allows more blood flow. Couches are used in more casual and informal settings like in an entertainment room or a cozy living space. While the finishes which is microfiber, is a knit blend polyester fabric that’s softer than suede and a whole lot easier to clean. This dense material is made of tightly woven synthetic fibers, providing durability and moisture resistance with the aesthetic qualities of real suede. With basic spot cleaning, any spills can be removed. It is also designed to last long since the material doesn't rips and tears easily and so they are more durable than other fabric materials. Unlike other couches, a microfiber couch does not collect dust easily thus it is better for allergy sufferer.
Installation Method 1. Prepare the tools such as screws, wood panels, drill, saw, mechanism for sofa bed, and glue. 2. Begin by using a saw to make the framework of the sofa by measuring it as designed. 3. Attach all the wood until it turned into a framework for the cushion using glue or joint. 4. Repeat it for the backrest. 5. Put a cushion that you have. 6. Attach the leg of the sofa with screws. 7. Assemble both of the backrest and the seat with a mechanism for the sofa bed. 8. Cover with a microfiber fabric to finish it.
TASK 1A - TIMBER SOFA 1600MM(W) X 690MM(L) X 1025MM (H) DARK TEAK WOOD SOFA IN OIL AND WAX FINISH C/W CUSHION SEAT PADDING IN BEIGE.
TEAK WOOD CUSHION
Description It is made out of teak that has oil and wax finish. Timber is a long-lasting natural material that can stand constant abuse. Solid timber furniture can last for generations with minimum care. It is nearly effortless to maintain by simply wipe the surface with a wood cleaner on a regular basis. The colour and grain of teak wood makes it one of the most attractive to furniture. But it is oiled to retain its warm golden colour. The oils also protect the wood from dry rot, which is a common problem in older wooden furniture. Meanwhile, paste wax is used to protect the oil finishes, even though sometimes it is used to finish bare wooden furniture. This is most successful on hard, closegrained woods. Wax will give the surface a soft sheen and smooth feel
Installation Method 1. Prepare all the tools that are needed such as measurement tapes, wheel marking gauge, saw, stain oil. 2. Cut the wood according to the design and shapes. 3. Make holes for the tenon and mortise joint 4. Use a standard wheel marking gauge that will make clean, accurate reference marks. It’s also great for transferring measurements (like the depth of a mortise). 5. Then start building from the bottom of the leg and connect one part with another. 6. Repeat with all four legs. 7. Attach all the parts of the framework for the seating. 8. After that, use the stain to highlight the color of the teak wood. 9. Right after the oil dries, use wax to finish it and act as a protective barrier and leave the wood looking both rich and natural. 10.After all the parts are assemble and dries, put on the cushion seat padding.
TASK 1B
WALL
Brick wall concrete with white paint finish
Floor Blow Up
Brick wall concrete with ceramic tiles in polish finish
Ceramic Tiles Finish
Ceiling Blow Up
PRODUCED BY AN AUTODESK STUDENT VERSION
2174
2438
SCREEN
132 2191
132
A
ELEVATION
SCALE 1:20
SCALE 1:20
DRAWN BY: SALSABILA DRAWING TITLE : ID NO: 0339740 WALL PLAN & CHECKED BY: NN ELEVATION PRODUCED BY AN AUTODESK STUDENT VERSION
NOTE :
PLAN
SCALE : 1:20 DATE : 15TH JULY 2020 DWGNO:DWG_SD_WP_1
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
A
PRODUCED BY AN AUTODESK STUDENT VERSION
1
EMBEDDED 200MM(THK) SPRAY FOAM INSULATION
2591
76MM(THK) SPRAY FOAM INSULATION
GYPSUM WALL BOARD
DT DETAIL 1 1 SCALE 1:2
AIR GAP 10MM(THK) DRYWALL IN DARK GRAY PAINT
10MM(THK) CARPET WITH PAD IN DARK GRAY FINISH 18MM(THK) PLYWOOD
18MM(THK) PLYWOOD
10MM(THK) X 90MM TIMBER JOIST
10MM(THK) X 90MM TIMBER JOIST
2
158MM C-CHANNEL METAL FRAMING
SCALE 1:20
NOTE :
DT DETAIL 2 2 SCALE 1:2
DRAWN BY: SALSABILA DRAWING TITLE : ID NO: 0339740 WALL SECTION & CHECKED BY: NN DETAILS PRODUCED BY AN AUTODESK STUDENT VERSION
SC SECTION A-A
SCALE : AS SHOWN DATE : 15TH JULY 2020 DWGNO:DWG_SD_WS_1
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
44MM (W) X 2800MM (H) CONTAINER WALL COATED IN WHITE POWDER FINISH
PRODUCED BY AN AUTODESK STUDENT VERSION
A
PLAN (BEFORE OPENED)
PLAN
SCALE 1:20
SCALE 1:20
PLYWOOD W/ DARK GRAY VINYL FINISHES
CUSHIONS DARK GREEN MICROFIBER FABRIC FINISH
SC SECTION A-A (BEFORE OPENED) SCALE 1:20
SC SECTION A-A SCALE 1:20
1000MM(W) X 700MM(L) X 900MM(H) COMPACT FURNITURE C/W DRAWER PLYWOOD W/ DARK GRAY VINYL FINISHES C/W CUSHION PAD IN DARK GREEN MICROFIBER FABRIC FINISH
DRAWN BY: SALSABILA DRAWING TITLE : ID NO: 0339740 FURNITURE PLAN & CHECKED BY: NN SECTION PRODUCED BY AN AUTODESK STUDENT VERSION
NOTE :
SCALE : 1:20 DATE : 15TH JULY 2020 DWG NO:DWG_SD_FP_1
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
A
1000
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
700
1000
150150
900
145165 300
960
920
SIDE ELEVATION
SCALE 1:20
SCALE 1:20
DRAWN BY: SALSABILA DRAWING TITLE : ID NO: 0339740 FURNITURE CHECKED BY: NN ELEVATION PRODUCED BY AN AUTODESK STUDENT VERSION
NOTE :
FRONT ELEVATION
SCALE : 1:20 DATE : 15TH JULY 2020 DWG NO :
PRODUCED BY AN AUTODESK STUDENT VERSION
DRAWER MEMBER
CABINET MEMBER
SCREW TO JOIN
DT DETAIL 1 1 SCALE 1:3 DRAWN BY: SALSABILA DRAWING TITLE : ID NO: 0339740 FURNITURE DETAIL CHECKED BY: NN PRODUCED BY AN AUTODESK STUDENT VERSION
NOTE :
SCALE : 1:3 DATE : 15TH JULY 2020 DWG NO:DWG_SD_FD_1
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PLYWOOD W/ DARK GRAY VINYL FINISHES
D E S I G N S A M P L E B O A R D WALL
WALL Dark Gray Drywall
FURNITURE
CUSHION Dark Green Microfiber
FLOOR Dark Gray Carper
COMPACT FURNITURE Dark Gray Vinyl