Bitumen Emulsion Bitumen Emulsion in Christchurch NZ Bitumen is completely selected from crude through shear method. The raw temperature is heated from three hundred to 350 degrees and fed into the distillation column, which permits critical parts of the crude by vaporization with critical parts, which can be a liquid
The boiling device is then made through a device and it has been introduced into highly vacuum distillation. This method produces “small residues”, which is employed to provide many grade hydrocarbons, the position of pressure and temperature between the vacuum method determines the hardness of the small residues and with small residues, where the air is 250- 300 ° C, ending “blowing in the air” will change It is about the entrance or section of the hydrocarbons used for the treatment of the surface of the road and there are some industrial applications in the regional unit. Additional treatment area unit hydrocarbon products and other grades of their use Oxidation hydrocarbons - Lots of stimuli compared to the temperature of the ground and they are probably filled with air for ‘low grade’ in the shape of rubber. Used with roofs, water resistant, electric products and many more. Hardness is used for hydrocarbon - rigid coatings and assembly of paint and anomalies etc. Cutbackant attendant - Pokébitan man with solvents like coccal oil is used for spraying and some combination applications Emulsion - Permanent suspension of hydrocarbons in water, Rough Expedes application area unit used on the road. Modified hydrocarbon polymer - a mixture of electret bitumen with such thermoplastic or elastomer polymers was destroyed in several ways For More Info:–> http://www.trafficrus.co.nz/store/