LEGRABOX M Height Drawer - M11低抽 Backing fixing (left/right) 後固定 (左/右)
Attention: Avoid dust get into the cabinet profile during installation 請注意： 安裝時請避免木屑掉進滑軌
Drawer sides (left/right) 側牆 (左/右)
Inner cover caps (1 pair) 內蓋 (1對) Front fixing (1 pair) 前扣件 (1對)
Cover caps (1 pair) 外蓋 (1對) Cabinet profiles (left/right) 滑軌 (左/右)
Cutting dimensions for 16 mm chipboard 使用16 mm 刨花板裁切尺寸 Back height 背板高度 M 高度 = 63 mm
LW – 38 mm
B
A
LW KB
Base with chipboard back 底板深度 NL - 10 mm
KB Cabinet width 櫃體外徑 LW Internal cabinet width 櫃體內徑 NL Nominal Length 長度
LW – 35 mm Notch dimensions 底板槽尺寸
Cabinet profile screw positions 滑軌固定螺絲位置
Drilling Distance - drawer base 底板開孔距離
Cabinet profile 滑軌 - 40kg NL Nominal length 長度 (mm) 270 mm 300–350 mm 400–500 mm 550, 600 mm
Min. internal cabinet depth = nominal length NL + 3 mm 最小櫃體淨深 = 長度 + 3 mm Chipboard screws 木工螺絲 Ø 4 x 15 mm
Planning 計劃 Space requirement 櫃體內所需空間
Installation dimensions - screw-on 面板安裝尺寸 - 螺絲擰入式 FA Front overlay 面板重疊
Back installation dimensions 背板安裝尺寸
LEGRABOX M Height Drawer - M11低抽 Assembly 組裝 1
2
3
5
6
7
Adjustment 調節 1
2
3 1
+/- 2 mm 1 2 1
2
2
+/- 1.5 mm
2
3
Drawer removal 櫃桶拆卸 1
2
Cleaning Instructions 淸潔指引 - Wipe using lightly damp soft cloth 用微濕的軟布抹擦 - Only use clean water, do not use chemical cleaners 使用淸水便可，請勿使用化學淸潔劑
4