A BARRIER GROUP business
01
bollards
04
workplace safety & solutions
07
expanding Barriers
02
asset protection
05
speed humps
08
pedestrian control
03
forklift separation
06
VEHICLE & PARKING
09
zone fencing
Pedestrian & Workplace Safety version 8
welcome letter
Looking back to move forward
Rick Hall Managing Director Barrier Group Pty. Ltd.
JAMES HAMPSHIRE Managing Director Thomas Jacobs Pty. Ltd.
With this our latest Version 8 catalogue instead of just looking forward and blazing a trail of new products, we reflected on our past and what has made us successful to this point. Invariably it has been our departure from the mainstream and a willingness to back ourselves with new and innovative products and services. So while this catalogue still introduces a range of new products, our main focus has been one of renewal, on improving those products that have worked well but may need a little nip here or tuck there, just to keep them fresh and current. A perfect example is our fixed and removable round bollards (Section 1), which now sport smart new architecturally designed cast caps and handles. Or in the case of our Port-a-guard 300/600 series expanding barriers (Section 7), which have had the full surgery and are all new from the ground up. But don’t think we are not keeping an eye on the future as well, check out our bold new Compliance Wheel Stops (page 66). This project took over 12 months and hundreds of thousands of dollars to develop. But in the end what we have done is produce a true “green alternative” to the so called “recycled” rubber wheel stops that currently flood our market (and which, in the short term at least, we will continue to offer). It is my personal belief and experience that this form of recycling is a farce and that the environmental and human impacts of reclaiming old tyres, then shipping them halfway around the world, before reprocessing them into rubber wheel stops and speed humps etc. is both unsustainable and irresponsible. And I intend to prove it, turn to page 18 to see how. Earlier I mentioned the things from our past that have made us successful, another of these has been carefully choosing and developing long term relationships with distributors that have the technical ability and integrity to represent our interests in a manner that meets our expectations, and exceeds yours.
James has developed an intimate understanding of our products and their applications over many years. Call him today!
James Hampshire and his company Thomas Jacobs Pty. Ltd. is one such distributor. Based in Port Melbourne, Victoria, James has developed an intimate understanding of our products and their applications over many years. I urge you to call James or to visit his website at www.thomasjacobs.com.au for personalised service, be it product information, a site visit or installation advice. Sometimes, the best way forward can be by looking back on your successes and then building on them. I hope you enjoy our new version 8 catalogue, I think you will find all your old favourites are still in here, they have just been made a little better!
Cheers,
Rick Hall Managing Director
Copyright © 2012 Barrier Group Pty. Ltd.
NEW Bollard Caps & Handles SECTION 01
NEW Neata Hook Posts PAGE 94
Compliance Wheel Stop PAGE 66
Port-a-guard 3 & 6 metre Expanding Barriers PAGE 82
Parking Separator PAGE 64
Stainless Steel Retractable Bollard PAGE 15
Q-Caddy PAGE 113
SECTION
01
BOLLARDS
Products in this section are primarily used for trafďŹ c control, property protection and ram-raid prevention. Our bollards are available in a wide range of styles and materials to suit most applications. We have a product sure to satisfy your requirements, whether it be surface mounted, in-ground, retractable or removable bollards. Manufactured from heavy wall tube in either mild steel or stainless steel, these products are built to take the knocks.
You may also be interested in pages: 23
BUMPA-BAR
25
SHOCK ABSORBING GUARD RAILS
36
POST & RAIL
78
FLEXIBLE BOLLARDS
3
STAINLESS STEEL BOLLARDS Our round stainless steel bollards are offered in three designs: below ground for installation into a concrete footing, core drilled for installation into a core drilled hole using epoxy adhesive, or surface mount for bolted installations. Manufactured from marine grade 316 stainless steel these bollards are all finished with No. 4 mechanical linish before being electro-polished. This is recommended for installation near coastal areas to minimise the risk of tea staining and to ensure the bollards maintain a high quality appearance over many years.
SECTION
01
A
D
C
All our stainless steel bollards have a fully welded and polished cap. This helps present a high quality appearance required for architectural environments. For the ultimate high quality presentation, polished stainless steel skirts are available as an option to cover the base plates and fixings.
Value features:
E
GROUND LEVEL
316 grade polished stainless steel. Electro-polished for maximum protection. Three methods of installation. 90 or 140mm diameter. Optional cover skirts available.
F B ANCHORING BARS
BELOW GROUND & SURFACE MOUNT MODELS
BELOW GROUND, SURFACE MOUNT & CORE DRILLED SPECIFICATIONS
Welded and polished flat cap.
PART NO.
C90BG-SS C90CD-SS C90SM-SS COV90-SS C140BG-SS C140CD-SS C140SM-SS COV140-SS
Optional base cover.
A
B
C
D
E
F
(mm)
(mm)
(mm)
(mm)
(mm)
Stainless Grade
Weight (kg)
Cap
(mm)
3.05 3.05 3.05
– – 6
– – 225
316 316 316
3.40 3.40 3.40
– – 10
– – 300
316 316 316
8kgs 7.4kgs 7.4kgs 0.3kgs 25kgs 22kgs 19kgs 0.5kg
Welded Flat Welded Flat Welded Flat N/A Welded Flat Welded Flat Welded Flat N/A
900 300 90 900 200 90 900 – 90 Optional 90mm base cover – stainless steel 1200 500 140 1200 200 140 1200 – 140 Optional 140mm base cover – stainless steel
Surface Finishes L
EP
Surface Finish: L – No.4 Linished. EP – Electro-polished.
BOLLARDS
Copyright © 2012 Barrier Group Pty. Ltd.
4 SECTION
01
ROUND BOLLARDS Our fixed round, surface mount and below ground bollards are designed for traffic control situations and asset protection. The surface mount bollards have fully welded base plates and are suitable for installation onto any concrete surface. The below ground bollards have fully welded starter bars for installation into new concrete footings. Suitable for installation in asphalt or any soft surface where a concrete footing will be necessary.
C C
A
All our bollards are supplied complete with necessary fixings. They are manufactured from heavy wall mild steel and hot dip galvanised as standard with the option of powder coating as a final finish. (Safety yellow is our standard colour. Other colours are available on request).
A
D D
Optional chain rings are available for connecting chains or ropes. Simply order with chain rings. Chain rings can also be purchased separately for retro fitting to existing bollards by drilling and tapping M10 threads as required.
E
Value features: Cast aluminium caps provide high quality finish. Standard class 1 reflective band. Fully welded heavy steel base plate. Welded starter bars for fixing into concrete footing. All models hot dip galvanised as standard.
B
Polyethylene protective sleeves are available to suit round 90 and 140mm bollards. For more information see page 5.
ANCHORING BARS
B
SURFACE MOUNT & BELOW GROUND MODELS
Cast aluminium caps.
Surface mount flange.
SURFACE MOUNT SPECIFICATIONS FOR ROUND BOLLARDS PART NO.
C63SM C63SM-G C90SM C90SM-G C140SM C140SM-G C165SM C165SM-G C220SM C220SM-G
A
B
C
D
E
Weight
(mm)
(mm)
(mm)
(mm)
(mm)
(kg)
900 900 900 900 1200 1200 1300 1300 1300 1300
150 150 225 225 300 300 350 350 400 400
63.5 63.5 90 90 140 140 165 165 220 220
1.6 1.6 5 5 5 5 5 5 6.4 6.4
6 6 6 6 10 10 12 12 12 12
4 4 9 9 23 23 34 34 45 45
No. of Fixings
3 3 4 4 4 4 4 4 4 4
Size of Fixing (sleeve anchor)
Cap
10 x 50mm 10 x 50mm 12 x 60mm 12 x 60mm 16 x 65mm 16 x 65mm 20 x 75mm 20 x 75mm 20 x 105mm 20 x 105mm
Push in Push in Fixed Fixed Fixed Fixed Loose Loose Loose Loose
Surface Finishes G
P
Surface Finish: G – Galvanised. P – Powder coated safety yellow unless specified a custom colour.
BOLLARDS
Copyright © 2012 Barrier Group Pty. Ltd.
5 SECTION
01
Welded anchoring bars.
Optional chain rings (FIX1117).
BELOW GROUND SPECIFICATIONS FOR ROUND BOLLARDS PART NO.
C63BG C63BG-G C90BG C90BG-G C140BG C140BG-G C165BG C165BG-G C220BG C220BG-G
A
B
C
D
Weight
Size of Anchoring Bars
(kg)
Anchoring Bars
(mm)
(mm)
(mm)
(mm)
900 900 900 900 1200 1200 1300 1300 1300 1300
300 300 380 380 500 500 650 650 650 650
63.5 63.5 90 90 140 140 165 165 220 220
1.6 1.6 5 5 5 5 5 5 6.4 6.4
4 4 12 12 29 29 40 40 53 53
2 2 2 2 2 2 2 2 2 2
30 x 30 x 50mm angle 30 x 30 x 50mm angle 30 x 30 x 50mm angle 30 x 30 x 100mm angle 30 x 30 x 100mm angle 30 x 30 x 100mm angle 30 x 30 x 100mm angle 30 x 30 x 100mm angle 30 x 30 x 100mm angle 30 x 30 x 100mm angle
Surface Finishes
Cap
Push in Push in Fixed Fixed Fixed Fixed Loose Loose Loose Loose
G
P
Surface Finish: G – Galvanised. P – Powder coated safety yellow unless specified a custom colour.
BOLLARD PROTECTION SLEEVES Barrier bollard protection sleeves offer a quick, simple and economical way to recondition old rusted, faded or scratched bollards without ever needing to remove, replace or re-paint again. Barrier’s modular bollard protection sleeves and caps fit any standard 140mm or 90mm diameter bollards, regardless of whether they are ours or a competitor’s. Ideal for shopping centres, carparks, schools and warehouses. Particularly useful in food processing facilities where chipped or flaking paint and powder coat surfaces are a health hazard. They can be washed down and are not affected by most chemicals or oils etc. The 140mm diameter sleeve module is 300mm in length and 225mm for the 90mm diameter model. The modules can be grouped in single colours or alternating colours for additional safety awareness. Eg. Yellow/Black or Red/White. Our bollard sleeves and caps offer economical long term indoor/outdoor protection and always look fresh. The super tough polyethylene sleeve caps complete the installation of our bollard protection sleeves. The cap is secured in place which in turn prevents the sleeves from being removed.
You won’t ever need to repair scratched, rusted or faded bollards again! BOLLARDS
Available for 90 and 140mm round bollards.
PART No. PBS90-Y
DESCRIPTION 90mm Yellow sleeve module
PART No. PBS140-Y
DESCRIPTION 140mm Yellow sleeve module
PBSC90-Y
90mm Yellow sleeve cap
PBSC140-Y
140mm Yellow sleeve cap
PBS90-B
90mm Black sleeve module
PBS140-B
140mm Black sleeve module
PBSC90-B
90mm Black sleeve cap
PBSC140-B
140mm Black sleeve cap
PBS90-R
90mm Red sleeve module
PBS140-R
140mm Red sleeve module
PBSC90-R
90mm Red sleeve cap
PBSC140-R
140mm Red sleeve cap
PBS90-W
90mm White sleeve module
PBS140-W
140mm White sleeve module
PBSC90-W
90mm White sleeve cap
PBSC140-W
140mm White sleeve cap
Copyright © 2012 Barrier Group Pty. Ltd.
6 SECTION
01
SQUARE BOLLARDS Our fixed, square surface mount and below ground bollards are designed for traffic control situations and asset protection. The surface mount bollards have fully welded base plates and are suitable for installation onto any concrete surface.
C
The below ground bollards have fully welded starter bars for installation into new concrete footings. Suitable for installation in asphalt or any soft surface where a concrete footing will be necessary.
C
A
All our bollards are supplied complete with necessary fixings. They are manufactured from heavy wall mild steel and hot dip galvanised as standard with the option of powder coating as a final finish. (Safety yellow is our standard colour. Other colours are available on request).
A
D D
Optional chain rings are available for connecting chains or ropes to our bollards. Simply order with chain rings. Chain rings can also be purchased separately for retro fitting to existing bollards by drilling and tapping M10 threads as required.
E
B
ANCHORING BARS
Value features: Available in two sizes. Standard class 1 reflective band. Fully welded heavy steel base plate. Welded starter bars for fixing into concrete footing. All models hot dip galvanised as standard.
B
SURFACE MOUNT & BELOW GROUND MODELS
SURFACE MOUNT SPECIFICATIONS FOR SQUARE BOLLARDS PART NO.
A
B
C
D
E
Weight
(mm)
(mm)
(mm)
(mm)
(mm)
(kg)
No. of Fixings
CS90SM 900 200 90 5 6 12.75 4 CS90SM-G 900 200 90 5 6 12.75 4 CS150SM 1200 300 150 5 10 32 4 300 150 5 10 32 4 CS150SM-G 1200 FIX1117 Metric shoulder gold eye bolt – can be attached to any of the above when requested.
Surface Finishes
Size of Fixing (sleeve anchor)
Cap
12 x 60mm 12 x 60mm 20 x 75mm 20 x 75mm
Welded Flat Welded Flat Welded Flat Welded Flat
G
P
– –
BELOW GROUND SPECIFICATIONS FOR SQUARE BOLLARDS PART NO.
A
B
C
D
Weight
(mm)
(mm)
(mm)
(mm)
(kg)
Anchoring Bars
CS90BG 900 400 90 5 16.5 2 CS90BG-G 900 400 90 5 16.5 2 CS150BG 1200 500 150 5 38 2 500 150 5 38 2 CS150BG-G 1200 Metric shoulder gold eye bolt – can be attached to any of the above when requested. FIX1117
Size of Anchoring Bars
30 x 30 x 50mm angle 30 x 30 x 50mm angle 30 x 30 x 100mm angle 30 x 30 x 100mm angle
Surface Finishes
Cap
Welded Flat Welded Flat Welded Flat Welded Flat
G
P
– –
Surface Finish: G – Galvanised. P – Powder coated safety yellow unless specified a custom colour.
BOLLARDS
Copyright © 2012 Barrier Group Pty. Ltd.
7
SHOCK ABSORBING BOLLARDS The Shock Absorbing Bollard (SAB) has the ability to shift sideways if hit at or near ground level. If the impact is higher up the bollard, it can tilt up to 8 degrees, at which point it locks up offering maximum protection. Alternatively if the contact is of a deflection or glancing nature, the SAB is able to rotate through 360 degrees. Each SAB comes fitted with high impact polyethylene protective sleeves. The sleeves are U.V. stabilised and won’t fade, rot, rust or peel. Never have to paint chipped, scratched or rusted bollards again. (For more information on protective bollard sleeves see page 5). SABs are designed to be used anywhere vehicles are manoeuvring at low speeds, such as carparks and warehouses etc. The self centering design means the SABs can take repeated impacts without incurring permanent damage. They simply absorb the impact and return to their original position. These unique characteristics result from the combination of clever engineering and the use of high tech composite materials. SABs are available in 140mm diameter in either core drilled in-ground or surface mounted models. Note: Not recommended for high speed traffic environments.
SECTION
01
140mm
5mm Wall
Protective Polyethylene Sleeves over hot dip galvanised bollard
1200mm
Value features: Eliminates damage caused by low speed impacts. Moves in 3 directions simultaneously to absorb impact. Suitable for indoor or outdoor use. Ideal for carparks and warehouses etc. Absorbs low speed impacts without sustaining damage. Fitted with Yellow/Black protective polyethylene sleeves. Absorbs the impact and returns to its original position. Available in core drilled or surface mount models.
Polypropylene Tim-rings
50mm
350mm
200mm
Specifications: Description:
Shock Absorbing Bollard (SAB).
Material:
Mild steel and composite core structure.
Finish:
Height:
Yellow / Black high impact polyethylene sleeves over galvanised bollard. 1200mm above ground.
Diameter:
140mm (bollard).
Weight:
Approx. 33kgs.
Installation:
Core drilled – 50mm hole x 200mm deep. Surface mount – 4 x M12 x 102mm structural anchors (supplied).
This is what can happen to rigidly fixed bollards with even a low speed impact. SABs simply absorb this kind of impact.
PART No.
DESCRIPTION
SAB140-CD
Shock Absorbing Bollard – Core drilled 140mm dia.
SAB140-SM
Shock Absorbing Bollard – Surface mount 140mm dia.
BOLLARDS
SURFACE MOUNT & BELOW GROUND MODELS
Shock Absorbing Bollard (SAB140-CD shown) 360º
1
8º
2
20mm
3
DEFLECTION IMPACT
TYPICAL UPPER IMPACT
TYPICAL LOWER IMPACT
Ability to rotate through 360º
Maximum angle of deflection 8º
Maximum sideways deflection 20mm at ground level
The vast majority of damage caused to assets is by vehicles manoeuvring at low speed. SABs have the ability to completely eliminate this damage.
Copyright © 2012 Barrier Group Pty. Ltd.
8 SECTION
01
FOLD DOWN BOLLARD Fold Down Bollards have been designed for applications such as vehicle access control. In the lay flat position the bollard is only 80mm high allowing sufficient vehicle clearance. In the upright position it stands 800mm high with a broad face of 150mm wide. Comes complete with a reflective sign face for greater visibility. Supplied with a 40mm padlock also available as a key lockable model which includes two keys. The vehicle bollards are available as a surface mount model or can be used with an in-ground kit (BGK4) for setting into new concrete. For installation into asphalt it is recommended to use a concrete footing for added strength and stability. It can be supplied in either hot dip galvanised or high visibility safety yellow powder coat. Replacement or additional sign face ordered separately.
Value features: Stands 800mm tall when locked up. Only 80mm high in the lay flat position. Available in surface mount or used with concrete footing kit. Padlock lockable model includes fixings and padlock. Key lockable model includes fixings and two keys. Hot dip galvanised or finished in high visibility safety yellow powder coat. Broad 150mm face includes reflective sign face.
BGK4
The fold down bollard stands 800mm high in the upright position.
Specifications: Description:
Fold down access barrier.
Material:
Mild steel.
Finish:
Safety yellow powder coat and galvanised or galvanised only.
Height:
Down 80mm / Up 800mm.
Weight:
Operating 5kgs / Shipping 12kgs.
Fixing:
Surface mount supplied with 4 off 12 x 60mm. Masonry anchors.
Locking:
40mm padlock (supplied) or key lockable.
Sign:
Class 2 reflective sheeting 120 x 500mm (included).
For parking space protection see our Lok-Up on page 70.
Only 80mm high in the lay flat position.
PART No.
DESCRIPTION
FD150
Powder coated fold down bollard – Padlock
FD150-G
Galvanised coated fold down bollard – Padlock
FD150K
Powder coated fold down bollard – Key lockable
FDS1
Reflective sign face with Red & Yellow diagonal stripes
BGK4
In-ground kit for FD150
BOLLARDS
FDS150K – Key lockable.
FDS150 – Padlock.
Copyright © 2012 Barrier Group Pty. Ltd.
Need Advice? We can offer technical support over the phone or maybe you simply need a specification sheet.
CALL NOW!
Installation? or just a site inspection… Some things just can’t be conveyed over the phone. In this case a site visit from one of our experienced representatives or installers will help us better understand your requirements, and allow us to recommend an appropriate solution that satisfies your needs.
CALL NOW!
Or...Something Custom Made? As designers and manufacturers with many years of experience, we can produce a new design or modify an existing product to suit your unique requirements.
CALL NOW!
10 SECTION
01
CAM-LOK REMOVABLE BOLLARDS The Cam-lok range of removable bollards with their heavy steel construction were originally designed to help combat ‘Ram-raids’ on businesses. While they still serve this security role with thousands of them now in the field, we find that our Cam-lok’s are being used more and more in architectural environments for managing vehicle access in restricted areas.
These are very expensive and make up a substantial part of the cost of the finished bollard, which is why most competitors removable bollards currently on the market use cheap, very poor quality locks that are unreliable and readily breached. While this may reduce the initial investment, it compromises the effectiveness of the bollard and the long term security of your assets.
These architectural applications vary from the security role in that there is a greater demand for an aesthetically pleasing design, hence the use of polished stainless steel instead of the more industrial powder coated finishes.
Another area where our product differs from most is that all our steel bollards (including those with powder coated finishes) are hot dip galvanised during manufacture. Alternatively our stainless steel models are made from marine grade 316.
However some things never change, one of these is our insistence on using only the very highest quality ‘Bi-lock’ removable core lock mechanisms with security registered keying.
Cam-lok removable bollards come in two styles. Freestanding for shop front or public open space installations, and roller door models for the protection of factory roller shutter doors.
CAM-LOK SPECIFICATIONS POST Part No. BCL90 BCL90-G BCL90-SS BCL90RD BCL90RD-G BCL140 BCL140-G BCL140-SS
POST
POST
A
B1
B2
C
Post
Description
Finish
(mm)
(mm)
(mm)
(mm)
90 90 90 90 90 140 140 140
950 950 950 950 950 1050 1050 1050
200 200 200 200 200 200 200 200
5.0 5.0 3.05 5.0 5.0 5.0 5.0 3.40
90mm freestanding post Powder coated 90mm freestanding post Galvanised 90mm freestanding post 316 stainless steel 90mm roller door post with door brackets Powder coated 90mm roller door post with door brackets Galvanised 140mm freestanding post Powder coated 140mm freestanding post Galvanised 140mm freestanding post 316 stainless steel
(kgs)
CORED SLEEVE Part No.
12.3 12.3 9.0 12.5 12.5 21 21 17
BCL90S-CD BCL90S-CD BCL90SS-CD BCL90S-CD BCL90S-CD BCL140S-CD BCL140S-CD BCL140SS-CD
D1 (mm)
CONCRETE SLEEVE Part No.
D2 (mm)
225 225 225 225 225 225 225 225
BCL90S-NC BCL90S-NC BCL90SS-NC BCL90S-NC BCL90S-NC BCL140S-NC BCL140S-NC BCL140SS-NC
425 425 425 425 425 425 425 425
CAM-LOK ACCESSORIES
Surface mounted bollard storage
Hanging post holders
Replacement locks and keys
These robust storage units offer a secure location to place your Cam-lok bollards while they are out of the ground. Because the bollard locks into the holder in the same way it does into the in-ground sleeve they are safe to mount outside, where they are close to where they are being used. They are a welded steel design and plated to resist rusting, available in two sizes to suit both 90 and 140mm bollards.
Hanging post holders are manufactured from anodised aluminium. Because they are not lockable they are best suited for internal storage of idle Cam-lok bollards. Each hanging holder is designed to hold one bollard, and will accept either 90 or 140mm models. They must be fixed into a sturdy wall, alternatively they can be post mounted if required.
Our premium ‘Bi-lock’ components have a number of benefits. Because of the removable core design, locks can quickly be re-keyed or damaged cores replaced if necessary without the need to dismantle the bollard to access the lock body. As all keys and locks are registered to the owner keys can not be cut without authorisation.
PART No. DESCRIPTION BCL90H
Cam-lok 90mm surface mount storage unit
PART No. DESCRIPTION
PART No. DESCRIPTION
BCL140H
Cam-lok 140mm surface mount storage unit
BHH
BCLKEY
BOLLARDS
Wall mount bollard storage unit
Cam-lok additional registered key
Copyright © 2012 Barrier Group Pty. Ltd.
11
CAM-LOK FEATURES
SECTION
ROLLER DOOR
01
FREE STANDING
SECURITY REGISTERED KEY
SECURITY REGISTERED KEY
New caps & handles New cast aluminium handles, caps and lock shrouds finished in a silver grey metallic powder coat add a refined architectural look and improved grip to our removable bollards.
A
C
B1
Above Ground
6mm THICK FLIP TOP PEDESTRIAN CAP
6mm THICK FLIP TOP PEDESTRIAN CAP
Premium locking system
B2
Our Cam-lok bollards are fitted with top quality ‘Bi-lock’ security locks with quick change cores that can be removed for maintenance or rekeying without disassembling the bollard.
Below Ground
D1
D2
Either of these in-ground sleeves are available for all removable bollards. Please specify core drilled or new concrete when ordering.
NEW CONCRETE SLEEVES
CORE DRILLED SLEEVES
New concrete sleeves are used where there is no existing concrete and a footing needs to be poured. Such applications would include gravel or bitumen surfaces or where the bollards need to be installed into a garden bed or grassed area. The sleeves are open to the bottom to allow for drainage and incorporate a hinged 6mm thick flush cap.
Where sleeves are to be installed into existing concrete a hole 106mm in diameter is core drilled into the slab, the sleeve is then set into the hole using an appropriate epoxy adhesive. The bollard interlocks with the sleeve to form a burst proof connection. When the bollard is removed the hole is covered by a 6mm thick hinged flush cap.
BOLLARDS
Roller door brackets These heavy duty roller door brackets interlock with the bollard shackle to lock the door down to the ground thereby offering maximum security against ‘ram raiding’ or levering up of the door.
Copyright © 2012 Barrier Group Pty. Ltd.
12 SECTION
01
SLEEVE-LOK REMOVABLE BOLLARDS The Sleeve-lok range of removable bollards with their heavy steel construction are well suited to help combat “Ram-raids” on businesses. They have served this security role now for over 12 years with thousands having been installed in all manner of applications. We find that our Sleeve-lok’s are also very widely used for managing vehicle access in restricted areas. These include industrial sites, parks and gardens and numerous other public space environments.
shop front or public open space installations, and roller door models for the protection of factory roller shutter doors.
Sleeve-lok removable bollards are differentiated from the Cam-lok range by their locking method. Where the Cam-lok’s use high security locks with an internal locking mechanism, the Sleeve-lok’s use a simple padlock design whereby the cap on the in-ground sleeve is secured to a high strength steel shackle welded onto the bollard.
Another area of improvement and one where our entire bollard range differs from our competitors, is that they are all hot dip galvanised during manufacture. This includes bollards that are have a powder coated finish. This is a significant development as hot dip galvanising has a dramatic impact on reducing corrosion and increasing the service life of the bollard.
In keeping with a greater demand for an aesthetically pleasing design in street furniture and fixtures used in public open spaces, we have undertaken a major re-design of our removable bollard range. This is evident in the smart new cast aluminium caps and handles on the Sleeve-lok bollards.
Sleeve-lok removable bollards come in two styles. Freestanding for
SLEEVE-LOK SPECIFICATIONS POST
POST
POST
A
B1
B2
C
Post (kgs)
CORED SLEEVE Part No.
Part No.
Description
Finish
(mm)
(mm)
(mm)
(mm)
BSL63 BSL63-G BSL90 BSL90-G BSL90RD BSL90RD-G BSL140 BSL140-G
63mm freestanding post 63mm freestanding post 90mm freestanding post 90mm freestanding post 90mm roller door post with door brackets 90mm roller door post with door brackets 140mm freestanding post 140mm freestanding post
Powder coated Galvanised Powder coated Galvanised Powder coated Galvanised Powder coated Galvanised
63 63 90 90 90 90 140 140
900 900 950 950 950 950 1050 1050
150 150 200 200 200 200 200 200
1.6 1.6 5.0 5.0 5.0 5.0 5.0 5.0
4.5 4.5 12 12 12.2 12.2 21 21
BSL63S-CD BSL63S-CD BSL90S-CD BSL90S-CD BSL90S-CD BSL90S-CD BSL140S-CD BSL140S-CD
D1 (mm)
CONCRETE SLEEVE Part No.
D2 (mm)
150 150 225 225 225 225 225 225
BSL63S-NC BSL63S-NC BSL90S-NC BSL90S-NC BSL90S-NC BSL90S-NC BSL140S-NC BSL140S-NC
300 300 425 425 425 425 425 425
SLEEVE-LOK ACCESSORIES
Surface mounted bollard storage
Hanging post holders
High security padlocks
These robust storage units offer a secure location to place your Sleeve-lok bollards while they are out of the ground. Because the bollard locks into the holder in the same way it does into the in-ground sleeve the holder is safe to mount outside where it is close to where it is being used. They are a welded steel design and plated to resist rusting, available in three sizes to suit 63, 90 and 140mm bollards.
Hanging post holders are manufactured from an anodised aluminium extrusion. Because they are not lockable they are best suited for internal storage of idle Sleeve-lok bollards. Each hanging holder is designed to hold one bollard, and will accept either 90 or 140mm bollards (Note: 63mm models are not suited to hanging holders). Hanging holders must be fixed into a sturdy wall or they can be post mounted if required.
We sell and recommend the use of a high quality padlock with a shielded shackle to help prevent tampering. The BPL2 is a high strength lock with a 9mm protected shackle. It is chrome plated to resist corrosion and is supplied with 2 keys per lock. Locks can be supplied keyed alike if you have multiple units or keyed differently.
PART No. DESCRIPTION BSL63H
Sleeve-lok 63mm surface mount storage unit
BSL90H
Sleeve-lok 90mm surface mount storage unit
PART No. DESCRIPTION
PART No. DESCRIPTION
BSL140H
Sleeve-lok 140mm surface mount storage unit
BHH
BPL2
BOLLARDS
Wall mount bollard storage unit
High security 9mm shielded padlock (2 keys)
Copyright © 2012 Barrier Group Pty. Ltd.
13
SLEEVE-LOK FEATURES
SECTION
ROLLER DOOR
01
FREE STANDING
25mm REFLECTIVE BAND
25mm REFLECTIVE BAND
New caps & handles New cast aluminium handles and caps finished in a silver grey metallic powder coat add a refined architectural look and improved grip to our removable bollards.
A
C
B1
Above Ground
6mm THICK FLIP TOP PEDESTRIAN CAP
6mm THICK FLIP TOP PEDESTRIAN CAP
Positive locking Sleeve-lok bollards are secured into the ground by padlocking the 6mm thick sleeve cap to the 10mm thick welded shackle on the bollard with our BPL2 high security padlock.
B2
Below Ground
D1
D2
Either of these in-ground sleeves are available for all removable bollards. Please specify core drilled or new concrete when ordering.
NEW CONCRETE SLEEVES
CORE DRILLED SLEEVES
New concrete sleeves are used where there is no existing concrete and a footing needs to be poured. Such applications would include gravel or bitumen surfaces or where the bollards need to be installed into a garden bed or grassed area. The sleeves are open to the bottom to allow for drainage and incorporate a hinged 6mm thick flush cap.
Where sleeves are to be installed into existing concrete a hole 106mm in diameter is core drilled into the slab, the sleeve is then set into the hole using an appropriate epoxy adhesive. The bollard interlocks with the sleeve to form a burst proof connection. When the bollard is removed the hole is covered by a 6mm thick hinged flush cap.
BOLLARDS
Roller door brackets These heavy duty roller door brackets interlock with the welded bollard shackle to lock the door down to the ground, thereby offering maximum security against ‘ram raiding’ or levering up of the door.
Copyright © 2012 Barrier Group Pty. Ltd.
14 SECTION
01
SURFACE MOUNT REMOVABLE BOLLARDS Surface mount removable bollards are designed for applications where the floor cannot be core drilled or penetrated. For example, spaces with suspended, prestressed slabs or clean areas such as food preparation or pharmaceutical processing. They are available in two different models, the Cam-lok model and the Tee-lok model. Structurally both models are identical but offer different locking systems depending on the level of security required.
Cam-lok model This heavy duty bollard locks into the surface mounted receiver shoe via an internal locking system which utilises a high security cam lock with registered keys. (2 keys are supplied per order. Additional keys may be purchased if required).
Tee-lok model The surface mount Tee-lok is exactly the same as the surface mount Cam-lok except that it does not employ high security locking. Instead, the Tee-lok uses our unique ‘T’ handle key to unlock and remove the bollard from the receiver shoe. Tee-lok is ideally suited to low or medium security applications, where the aim is to stop vehicles entering unauthorised areas or separating vehicles from pedestrians, especially around work places.
Value features: Strong 90mm post with 5mm thick wall. Heavy steel receiver shoe only 20mm high when post removed. Requires only 4 off 12mm holes, 65mm deep. No core drilling or slab penetration. Internal locking system with either high security cam-loks with registered keys or unique ‘T’ handle keys. Fixings for receiver shoe are inaccessible when post locked in. Optional colours available on request.
Tee-lok model shown.
Specifications: Description:
Surface mount removable bollards.
Material:
Steel post 90mm diameter with 5mm wall.
Finish:
Zinc plated and E-Coated prior to safety yellow powder coat.
Height:
950mm post height. Receiver shoe only 20mm high with post removed.
Weight:
Post 11.9kgs / Receiver shoe 2.9kgs.
Installation:
4 off 12 x 65mm sleeve anchors.
PART No.
DESCRIPTION
SMCL
Cam-lok surface mount bollard
BCLKEY
Additional Cam-lok registered key
SMTL
Tee-lok surface mount bollard
BRKEY
Additional ‘T’-handle key for Tee-lok
SMCLH
Receiver shoes for Cam-lok / Tee-lok (Also used as a storage unit for bollards)
BOLLARDS
Bollard installed into shoe.
Bollard to shoe interlock (SMCLH).
Cam-lok model (SMCL).
Tee-lok model (SMTL).
Copyright © 2012 Barrier Group Pty. Ltd.
Retractable bollards are designed for medium security applications such as traffic and parking control. They offer a simple, trouble free operation proven over many years of installation. Note: A retractable bollard should not be used where high security locking is required, such as car yards etc. For these applications insurance companies insist on our “Cam-lok” removable bollards.
The retractable bollard is now available with a choice of two different materials. The BR900 has a 5mm thick mild steel bollard that is zinc coated and E-Coated before being powder coated in hi-vis safety yellow with two reflective bands. The BR900-SS has a 3.05mm thick 316 marine grade stainless steel bollard. As this model is designed for more architectural applications it does not include reflective bands.
15
Black anti-slip surface
RETRACTABLE BOLLARDS – Powder Coated or Stainless Steel
SECTION
01
50mm Class 1 Reflective Band (2 places) BR900 Steel model only 90mm
900mm Now available with the option of a 316 marine grade stainless steel bollard (without reflective bands)
Powder coat E-Coat Zinc
Value features: Locks in both up and down positions. Strong circular design 90mm diameter x 5mm wall. Black anti-slip surface on top of bollard. Unique low cost ‘T’ handle key. Convenient, no loose posts to store. Galvanised in ground casing. Available with a powder coated finish or 316 grade stainless steel bollards. Trouble free design. Only 2 moving parts. Internal locking system can’t be tampered with or fouled by dirt or water. Note: 2 keys supplied per order. Additional keys may be purchased.
Concrete footing
Galvanised in-ground casing
Compacted fill
1150mm
Specifications Description: Material:
Finish:
Height: Weight: Locking: Installation:
Retractable bollard for vehicle access and parking control. Bollards 90mm diameter with 5mm mild steel or 3.05mm 316 stainless steel wall. In ground casing 140mm with 5mm wall mild steel. Powder coated models are zinc plated prior to E-Coating and finally powder coated. Stainless steel models are marine grade 316. In-ground casings for all models are hot dip galvanised.
Drainage aggregate
Above ground 900mm. Below ground 1150mm. BR900 41.5kgs / Operating weight 6kgs. BR900-SS 38kgs / Operating weight 4kgs. Unique internal locking mechanism with ‘T’ handle key. Excavation and concrete footing.
350mm Diameter
E-COATING is another name for electrocoating, electropainting, or electrophoretic lacquering. It is used to deposit a paint or lacquer coating (rather than metal, as is deposited by electroplating). PART No.
DESCRIPTION
BR900
Retractable bollard assembly – powder coated
BR900R
Replacement bollard
BR900-SS
Retractable bollard assembly – 316 stainless steel
BR900R-SS
Replacement 316 stainless steel bollard
BRKEY
Additional ‘T’ handle key for retractable bollard
BOLLARDS
1. Locks in down position.
2. Turn to unlock and lift.
3. Turn to lock in up position.
Copyright © 2012 Barrier Group Pty. Ltd.
16
IP03
RETRACTABLE BOLLARDS SECTION
01
Installation Procedure: 1. Set out and bore holes approximately 500mm diameter. Recommended spacing for bollards is 1400mm maximum, centre to centre. Holes should be 100mm deeper than the length of the galvanised ground casing. (PHOTO 1). 2. Place coarse gravel in the bottom of the hole, sit the bollard on this base until the top flange plate is approximately 10mm above the natural ground level. Ensure bollard is plumb then place more gravel around the bollard until the hole is approximately 1/3 full. (PHOTO 2).
1.
2.
3.
4.
5.
6.
3. Replace some of the excavated soil from the hole and compact until the hole is approximately 2/3 full. Check the operation of the bollard. (PHOTO 3).
4. When satisfied the bollard is plumb and at the correct height, cover the top with tape to prevent entry of cement into bollard casing. Fill the balance of the hole with 35-50 mpa concrete. Add steel reinforcing if required. (PHOTO 4). 5. Finish off concrete as desired, remove the protective tape and clean around the bollard and top flange. (PHOTO 5).
6. Stand back and admire your beautiful work. Well done! (PHOTO 6).
PLEASE NOTE a. When finishing off the concrete, taper the surface slightly away from the surface flange. This will reduce the amount of water that finds its way into the ground casing. b. The coarse gravel in the bottom of the hole acts as a drainage sump for water that finds its way into the casing. This is normal and should not be seen as a problem. c. Never allow the bollard to free-fall from the raised position. Always lower using the ‘T’ handle key. Photos courtesy of R.L. Reed Inc. (Las Vegas).
BOLLARDS
Copyright © 2012 Barrier Group Pty. Ltd.
IP04
17
RETRACTABLE BOLLARDS SECTION
01
Locking Procedure: 1. Insert the ‘fingers only’ of the key into the bollard, as shown. Note: Slot in bollard is off-centre. Insert key so that handle is facing out on ‘short’ side of the cap.
1. Insert key to short side.
2. Fully insert and pivot key to upright position.
3. Rotate to unlock then lift.
4. Lift until fully extended.
5. Rotate to lock.
6. Confirm bollard is locked.
(DIAGRAM 1).
2. Fully insert key while pivoting upwards into the vertical position. Note: It is important that the key is fully inserted until it can not go any further. (DIAGRAM 2). 3. Lift the key until the weight of the bollard is taken. Rotate anti-clockwise to unlock. (DIAGRAM 3).
4. Lift bollard until fully extended. (DIAGRAM 4).
5. While holding bollard in the fully extended position, rotate in anti-clockwise direction until it stops. Remove the key. The bollard should now be locked in the upright position. (DIAGRAM 5). 6. Now re-insert the ‘fingers only’ of the key and support the bollards weight, then twist from left to right. If locked correctly there will be minimal rotation. If not locked, the bollard will fully rotate and retract. (DIAGRAM 6).
Note: Reverse procedure to unlock and lower bollard.
WARNING NEVER ALLOW THE BOLLARD TO FREE FALL INTO THE GROUND. DAMAGE MAY RESULT. BOLLARDS
Copyright © 2012 Barrier Group Pty. Ltd.
ATTENTION Architects, Specifiers and Buyers! Recycling. Is it really good for the environment, or just a load of old rubbish? It has long been my opinion that specifiers and buyers of wheel stops and speed humps manufactured from recycled rubber naively accept without question, that recycling of old tyres and other scrap rubber into new products is good for the environment. To answer the above question, Barrier Group has engaged Dr Enda Crossin and his team from the Centre for Design at RMIT University in Melbourne, to undertake a comparison Life Cycle Assessment (LCA) study of the cradle to grave environmental impacts including end of life disposal scenarios for our new LLDPE Compliance wheel stops and those made from recycled rubber. As part of our product development and marketing activities, Barrier Group are interested in investigating the environmental impacts of the Compliance one piece wheel stop system, and how these impacts compare with those of similar wheel stop systems, produced from recycled rubber. This study will provide insights into the comparative environmental properties of the two wheel stop systems which will support Barrier Group in identifying key areas for product improvement and innovation.
Goal & scope The primary aim of the study is to quantify and compare the life cycle environmental impacts, including those related to manufacture, distribution, use and disposal, of the following wheel stop systems: 1. Compliance one piece wheel stop, produced from injection-moulded linear low-density polyethylene (LLDPE) by Barrier Group Pty. Ltd. 2. Recycled rubber wheel stop, produced from reclaimed tyres and scrap rubber of unknown origins by various manufacturers. In order to assess the life cycle impacts of the two wheel stop systems six key indicators will be applied to the study, they are described in the table below.
Table 2-1: Impact assessment indicators to be applied Indicators
Unit
Description
Global Warming
kg CO2 eq
Climate change effects resulting from the emission of carbon dioxide (CO2), methane and other greenhouse gases into the atmosphere. Factors applied to convert emissions of greenhouse gas emissions into carbon dioxide (CO2) equivalents emissions conform to IPCC 2007 factors for a 100 year time horizon.
Water use
kL H2O
Water usage. Total of all water used by the processes considered.
Solid waste
kg
Solid waste generated. Total of all solid waste generated by the processes considered. This indicator has been designed according to the first CML impact assessment method (CML 92 V2.04). Note that the CML 92 is the only European impact assessment method that takes solid waste into account. CML is a research centre based in the Institute of Environmental Sciences of Leiden (Netherlands).
Photo-oxidation formation
C2H4-eq
Photochemical Ozone Creation Potential (POCP) (also known as summer smog) for emission of substances to air is calculated with the UNECE Trajectory model (including fate), and expressed in kg ethylene equivalents/kg emission
Human toxicity
DALY
Total damage caused by non-carcinogenic and carcinogenic emissions measured in disability adjusted life years (DALY), a rate of mortality and disability, which ranks years of life lost with years of disease and disability.
Depletion of minerals & fossil fuels
MJ Surplus
The additional energy required to extract resources (both mineral and fossil) due to depletion of reserves, leaving lower quality reserves behind. The minerals indicator has been designed from an Eco-Indicator impact assessment method (Eco-indicator 1999 (H) V2.05). Eco-Indicator is an impact assessment method developed by Product Ecology Consultants, a Dutch based research and consultancy company. The method has been developed between 1997 and 1999, commissioned by the Dutch Ministry of Urban Planning, Housing and the Environment.
The terms of engagement for this study were outlined with RMIT in November 2011 and the study commenced in April 2012. It is anticipated the study will be completed in August of 2012 at which time the results will be published on our websites and be available for downloading. They will also be distributed on request in hard copy.
SECTION
02
ASSET PROTECTION
Products in this section are designed to protect humans and assets through their ability to absorb and dissipate the force of impacts. These include products like our ‘Shock Absorbing Guard Rail’ on page 23 which has the ability to absorb repeated vehicle impacts by tilting or shifting sideways. Typically, these impacts are occurring in environments where vehicles are travelling or manoeuvring at lower speeds, such as in off road situations like car parks, warehouses and institutions.
You may also be interested in pages: 07
SHOCK ABSORBING BOLLARDS
38
CHANNEL RAIL
51
RACKING GUARDS
106
ZONE FENCING
MENNI – Asset protection Menni is a set of four modular components that can be plugged together in any combination to satisfy a wide range of end user applications.
20 SECTION
02
These applications may include protecting physical assets by preventing vehicles from coming into contact with them. Alternatively, Menni can be used where goods are stored near pedestrian zones to prevent encroachment by forklifts and other vehicles. There are four modules in the Menni system. The end module, the body module, the ‘T’ or intersection module and the 90 degree corner module. All Menni modules are manufactured from a high tech Linear Low Density Polyethylene (LLDPE) with solid colour. They will not fade, rot, rust or crack and they have built-in reflectors for enhanced night visibility. Suitable for use anywhere your imagination takes you. And finally, Menni has been designed and developed in Australia, referencing the relevant standards and using premium virgin grade materials suited to tough local conditions.
MENNI BMB-Y BODY MODULE
MENNI BME-Y END MODULE
Body modules are used to provide length. They can be used in any quantity and they may be combined with end, corner & ‘T’ modules.
End modules provide a start and end point for any installation. The rounded and sloping end reduces tripping hazards or the risk of tyre damage to vehicles.
L550 x W150 x H100mm.
L550 x W150 x H100mm.
MENNI BMT-Y T-INTERSECTION MODULE
MENNI BMC-Y 90 DEGREE CORNER MODULE
T-intersection modules allow intersecting lines of modules to connect to each other. Particularly useful in pedestrian fencing or trolley bay applications.
Corner modules allow for left or right changes in direction of 90 degrees. Can be used with all other modules.
L(a)300 x L(b)225 x W150 x H100mm.
L(a)225 x L(b)225 x W150 x H100mm.
One product – Menni solutions. See page 41 for installation procedure.
Value features: Designed to comply with AS2890.1:2004 for wheel stops and AS1657:1992 for walkways. Solid colour, U.V. stabilised, high tech composite plastic construction. Supplied with fixings, blanking plugs and connectors ready for installation. Built-in edge reflectors for improved visibility for approaching vehicles. Optional top reflector plugs for improved pedestrian safety. Slip resistant texture moulded into surface. Excellent outdoor weathering characteristics. Lightweight with incredible strength. Modular design for ease of use and handling. PART No.
DESCRIPTION
BME-Y
Menni end module – Yellow
BMB-Y
Menni body module – Yellow
BMT-Y
Menni T-intersection module – Yellow
BMC-Y
Menni 90 degree corner module – Yellow
BMR
Optional top reflector plugs
ASSET PROTECTION
Copyright © 2012 Barrier Group Pty. Ltd.
MENNI FEATURES
21 SECTION
02 Australian designed and developed
Super tough construction
Moulded textured surface
Super tough Linear Low Density Polyethylene (LLDPE) with its flexible character, plus the gusseted design of Menni combine to create a highly durable, U.V. and impact resistant product.
The top surface of Menni has a textured surface to help with slip resistance. This texture is moulded in, which means it is there for the life of the product.
Unique moulded connection
50mm holes accept FRP post
Optional top reflectors
This image demonstrates the principle of the connection between modules. The blanking plug doubles as a connector which locks the modules together prior to them being fixed to the surface. Even if a fixing were to come loose on one module it is still held in place by the connector.
All module mounting holes double as a socket to receive our 50mm diameter FRP posts. This allows Menni to be used with our unique Q-Fence system, see page 40 for more information.
All Menni modules are supplied with blanking plugs to close off the mounting holes after installation. As an alternative, optional reflector plugs can be used for enhanced visibility by pedestrians.
Standard side reflector
Supplied with all fixings
Supplied with blanking plugs
Modules come standard with moulded in side reflectors. These built-in reflectors improve visibility for approaching vehicles. Optional top reflectors are available on request.
All modules are supplied with a full set of fixings, including large 50mm diameter load sharing washers, anchors and blanking plugs.
Standard blanking plugs are supplied with all modules and serve 2 purposes. 1. They cap off mounting holes after installation. 2. They double as the module connector when inverted. Optional reflector plugs are available on request.
The Menni solutions system has been designed and developed in Australia for tough Australian conditions. It has been designed to comply to the Australian Standards relevant to its intended uses.
ASSET PROTECTION
Copyright © 2012 Barrier Group Pty. Ltd.
BUMPA-BAR – Single rail Bumpa-bar is a heavy duty guard rail system designed for use around industrial complexes and carparks, etc., for the protection of buildings, equipment and pedestrians from moving vehicles and fork lifts.
22 SECTION
02
The single heavy duty 90mm rails have a galvanised finish while the 140mm posts are galvanised and finished in safety yellow powder coat. Posts are available in surface mount or in-ground, while the rails come in three convenient lengths. Buyers interested in this product should also look at our Double Rail Bumpa-bar on page 23 and also the Shock Absorbing Guard Rail on page 25.
Value features: Tubular construction means no sharp edges for improved pedestrian safety. 90mm rails and 140mm posts, all with 5mm walls. 10mm thick base plates. (Surface mount). Hot dip galvanised.
Specifications: Description:
Heavy duty single rail barrier.
PART No.
DESCRIPTION
Material:
Posts – 140mm diameter with 5mm wall 600mm high. Rails – 90mm diameter with 5mm wall.
BB140SM
Bumpa-bar surface mount post – Safety yellow over galvanised steel
BB140BG
Bumpa-bar below ground post – Safety yellow over galvanised steel
BB1402-2G
Bumpa-bar 2 metre rail (requires 2 posts) – Galvanised finish
BB1403-2G
Bumpa-bar 3 metre rail (requires 2 posts) – Galvanised finish
BB1403-3G
Bumpa-bar 3 metre rail (requires 3 posts) – Galvanised finish
BB1404-3G
Bumpa-bar 4 metre rail (requires 3 posts) – Galvanised finish
Finish:
Posts – Galvanised with safety yellow powder coat. Rails – Hot dip galvanised. (powder coat opt.)
Weight:
In-ground posts 18kgs. Surface mount post 16kgs. Rails 7.8kgs per metre.
Installation:
4 x 16mm masonry anchors per post. (Surface mount).
Fully welded mounting brackets with single bolt attachment allows rails to be mounted on sloping ground.
ASSET PROTECTION
Copyright © 2012 Barrier Group Pty. Ltd.
BUMPA-BAR – Double rail Double rail Bumpa-bar is for extra heavy duty applications. Comprising large 165mm diameter posts with dual 90mm diameter heavy duty rails. Posts are available in surface mount or below ground models, while rails comes in 2, 3 or 4 metre lengths.
23
Buyers interested in this product should also look at our Single Rail Bumpa-bar on page 22 and also the Shock Absorbing Guard Rail on page 25.
SECTION
Value features:
02
Heavy duty 165mm dia. posts with double rail brackets. 90mm rails with 5mm thick walls. 12mm thick base plates (surface mount model). Tubular construction means no sharp edges for improved pedestrian safety. Hot dip galvanised.
Specifications: Description:
Heavy duty double rail barrier.
Material:
Posts – 165mm diameter with 5mm wall. Rails – 90mm diameter with 5mm wall.
Finish:
Posts – Galvanised with safety yellow powder coat. Rails – Hot dip galvanised. (powder coat opt.)
Weight:
Installation:
In-ground posts 23.5kgs. Surface mount post 18.5kgs. Rails 7.8kgs per metre. 4 x 20mm masonry anchors per post (surface mount model).
PART No.
DESCRIPTION
BB165SM
Bumpa-bar double rail surface mount post – Safety yellow over galvanised
BB165BG
Bumpa-bar double rail below ground post – Safety yellow over galvanised
BB1402-2G
Bumpa-bar 2 metre rail (requires 2 posts) – Galvanised finish
BB1403-2G
Bumpa-bar 3 metre rail (requires 2 posts) – Galvanised finish
BB1403-3G
Bumpa-bar 3 metre rail (requires 3 posts) – Galvanised finish
BB1404-3G
Bumpa-bar 4 metre rail (requires 3 posts) – Galvanised finish
Fully welded mounting brackets with single bolt attachment allows rails to be mounted on sloping ground.
ASSET PROTECTION
Copyright © 2012 Barrier Group Pty. Ltd.
U-BARS – Heavy duty The modular design of these heavy duty U-Bars means they are adaptable to a wide range of uses. They are manufactured from heavy wall steel tube 90mm in diameter and hot dip galvanised. Powder coating in a colour of choice is optional.
24 SECTION
02
There are two styles, surface mount and below ground, with each style being available in three sizes for a total of six standard options. Surface mount models are fixed at 700mm above ground, while the height of below ground models can be regulated simply by embedding them more or less into their concrete footings.
Modular design UB100 models consist of 2 components, a male leg and a female leg. The 2 halves slip together and are secured using the connector pins provided. UB150 and UB200 models operate in the same way as above except that they have a third component, the expansion tube. The expansion tube has a male end and a female end and fits between the 2 legs. Changing the length of the expansion tube allows U-bars of different lengths to be achieved.
SURFACE MOUNT MODEL (Front view)
Value features: Heavy duty 5mm thick wall. Flexible modular design. Hot dip galvanised finish. Powder coating option available. Surface mount and below ground models. Easy on site assembly with fixings supplied.
1000mm
1500mm
2000mm
90mm 700mm
5mm WALL
Specifications: Description:
Modular steel U-Bar system.
Material:
Steel pipe 90mm diameter with a 5mm wall.
Finish:
Hot dip galvanised (powder coating optional).
Height:
Above ground 700mm. Below ground 500mm. 1000, 1500 or 2000mm.
Width: Weight:
Installation:
Fixings:
225mm
UB100 approx. 31kgs. UB150 approx. 36kgs. UB200 approx. 41kgs.
UB150-SM
UB200-SM
BELOW GROUND MODEL (Front view)
6mm thick surface flange 225mm in diameter with 8 of 12 x 60mm masonry anchors for surface mount model. Below ground model has welded concrete starter bars. Supplied with surface mount models. Connector pins supplied with all models.
UB100-SM
1000mm
1500mm
2000mm
90mm 700mm
5mm WALL PART No.
DESCRIPTION
UB100SM-G
1.0 metre surface mount U-Bar (2 piece) – Galvanised
UB100BG-G
1.0 metre below ground U-Bar (2 piece) – Galvanised
UB150SM-G
1.5 metre surface mount U-Bar (3 piece) – Galvanised
UB150BG-G
1.5 metre below ground U-Bar (3 piece) – Galvanised
UB200SM-G
2.0 metre surface mount U-Bar (3 piece) – Galvanised
UB200BG-G
2.0 metre below ground U-Bar (3 piece) – Galvanised
ASSET PROTECTION
500mm
ANCHORING BARS
UB100-BG
UB150-BG
UB200-BG
Copyright © 2012 Barrier Group Pty. Ltd.
SHOCK ABSORBING GUARD RAIL The Shock Absorbing Guard Rail (SAGR) has the ability to shift sideways if hit at or near ground level. If the impact is higher up, it can tilt up to 8 degrees at which point it locks up offering maximum protection. SAGRs are designed to be used anywhere vehicles are manoeuvring at low speeds, such as carparks and warehouses etc.
25
The self centering design means the SAGRs can take repeated low speed impacts without incurring permanent damage. They simply absorb the impact and return to their original position without damaging floors, as with rigid barriers.
SECTION
02
These unique characteristics result from the combination of clever engineering and the use of high tech composite materials. SAGR posts are available in 140mm diameter in either core drilled in-ground or surface mounted models. Rails are 140mm diameter and available in lengths up to 6.0 metres. Note: Not recommended for high speed traffic environments.
Value features: Heavy 140mm diameter galvanised steel rails and posts. Eliminates damage caused by low speed impacts. Moves in 2 directions simultaneously to absorb impact. Suitable for indoor or outdoor use. Ideal for carparks and warehouses etc. Can take repeated impacts without sustaining damage. Absorbs the impact and returns to its original position. Available in core drilled or surface mount models.
NOW FULLY HOT DIP GALVANISED FOR EXTRA PROTECTION (powder coating optional)
Core drilled or surface mount options.
PART No.
DESCRIPTION
SAGR140-CD
Shock Absorbing Guard Rail Core Drilled Post
SAGR140-SM
Shock Absorbing Guard Rail Surface Mount Post
SAGR2000
Shock Absorbing Guard Rail 2000mm long (requires 2 posts)
SAGR3000
Shock Absorbing Guard Rail 3000mm long (requires 2 posts)
SAGR4000
Shock Absorbing Guard Rail 4000mm long (requires 2 posts)
SAGR5000
Shock Absorbing Guard Rail 5000mm long (requires 3 posts)
SAGR6000
Shock Absorbing Guard Rail 6000mm long (requires 3 posts)
ASSET PROTECTION
Specifications: Description:
Shock Absorbing Guard Rail (SAGR).
Material:
Mild steel and composite core structure.
Finish:
Posts and rails – hot dip galvanised (powder coating optional).
Height:
600mm to top of rail.
Diameter:
Posts and Rails 140mm diameter.
Weight:
Posts 23kgs approx. Rails 23kgs approx. per metre.
Installation:
Core drilled 50mm hole x 200mm deep. Surface mount – 4 x M12 x 102mm structural anchors (supplied). Copyright © 2012 Barrier Group Pty. Ltd.
RE
CY
CL
ED
Prevent damage to both vehicles and buildings, particularly in building basements where space is often restricted. Corner protectors are ideal in loading docks. Made from recycled rubber with reflective panels.
26 SECTION
02
1 90 00m m m m
CORNER PROTECTORS
8m
CP1080R Corner Protector
Value features:
Height:
m
800mm. Weight: 1.8kgs.
Reduces damage to vehicles and buildings. Economical solution, simple to install. Complete with reflective panels for increased visibility.
PART No.
DESCRIPTION
CP1080R
Corner protector 100 x 100 x 800mm long
RE
CY
CL
ED
DOCKING BUMPERS – D-Section Heavy duty docking bumpers. Suitable for loading bays and jetties etc. Manufactured from hard wearing blended rubber compound. Available in three sizes, 100 x 100 x 300mm, 100 x 100 x 1000mm and 200 x 200 x 900mm. Standard lengths can be cut as desired.
Value features: Heavy duty rubber in three sizes. Can be cut to length and drilled. Reduces damage to vehicles and buildings.
PART No.
DESCRIPTION
DR300
Dock bumper 100 x 100 x 300mm long (2.3kgs)
DR1000
Dock bumper 100 x 100 x 1000mm long (7.5kgs)
DR2020
Dock bumper 200 x 200 x 900mm long (35kgs)
RE
CY
CL
ED
DOCKING BUMPER – B-Section A slimline high performance docking bumper for loading bays or areas where mobile trolleys and hand trucks cause damage to physical assets.
1000mm
Only 55mm thick with reflective centre panel for improved visibility in low light environments.
Value features: Slimline design, only 55mm thick x 1000mm long. Reflective panel for improved visibility. Recessed mounting holes moulded in. Ideal for protection against trolley and pallet trucks.
PART No.
DESCRIPTION
DR160
B-Section dock bumper 55 x 160 x 1000mm (5kgs)
ASSET PROTECTION
160mm
55mm
Copyright © 2012 Barrier Group Pty. Ltd.
VEHICLE BUMPERS – Menni When used as vehicle bumpers Menni modules offer a high level of impact protection to physical assets. Injection moulded from super tough and durable Linear Low Density Polyethylene (LLDPE) with recessed fixing points. Plug multiple modules together to make the bumper any length you need. Each end or body modules comes complete with fixings and connectors. With high visibility U.V. stabilised safety yellow, solid colour, they won’t fade, and are resistant to chemicals, oils etc. Quick and simple to install.
27 SECTION
02
MORE INFORMATION ON MENNI See page 20.
Value features: Handy 550mm long modules in two styles. Moulded from super tough polyethylene. Deeply recessed fixing points protected from impact. Hi-vis safety yellow with solid colour. Fixings included: 2 x masonry fixings, 2 x 50mm diameter washers, 2 x blanking plugs, 1 x connector plug.
PART No.
DESCRIPTION
BME-Y
Menni end module – Yellow
BMB-Y
Menni body module – Yellow
BMR
Optional top reflector plugs
Menni vehicle bumper (shown here with optional reflector caps).
Menni end module.
Menni body module.
DOCKING BUMPERS – Dock-safe Dock-safe receiver blocks form part of our unique Dock-safe barrier system (see page 50). When used in isolation the blocks robust construction make them ideal dock bumpers. Manufactured from high quality rubber, they incorporate recessed mounting points for M12 fixings (not included) and have the ability to crush and rebound on impact.
HANDY HINT Position Dock-safe receivers so you can add drop-in Dock-safe panels at a later date if desired (see page 50.)
Value features: Part of the unique Dock-safe barrier system (see page 50). Solid rubber construction with built-in compression feature. Protected and recessed fixing points. High quality rubber compound.
Dock-safe receiver blocks form part of our unique Dock-safe barrier system.
50mm
295mm
100mm
PART No.
DESCRIPTION
DSR1
Dock-safe receiver 355mm long x 150mm high (12kgs)
ASSET PROTECTION
150mm
100mm
355mm
Copyright © 2012 Barrier Group Pty. Ltd.
PARK SENTRY® The World’s First Effective Bump-N-Go Collision Protector
28 SECTION
02
Park Sentry® is a new, attractive way to add a layer of effective protection around parking structure columns. Park Sentry® adds a soft, scratch-resistant layer of protection around concrete columns, protecting both columns and vehicles from collision damage. Easily applied with few or no tools, Park Sentry® increases the visibility of the column to help avoid collisions altogether. With Park Sentry installed, vehicles can confidently park closer to the columns, virtually expanding the usable parking space. Moulded from a thin layer of specifically engineered ARPRO® material, Park Sentry buffers the column with scratch-free padding. Park Sentry’s unique design offers extra protection in the 90 degree corners where most collision damage occurs. Park Sentry can be customized to fit any square or rectangular concrete column. Ideal for car-park applications because it maximizes protection and increases parking space.
Standard kit includes: planks, corners, key-locks and straps to protect columns up to 610 x 610mm. Panels are cut down with a sharp knife to suit smaller column sizes.
Value features: Modular design fits any sized four-sided column. Made from specifically engineered ARPRO® material. U.V. stabilised. 40mm thick plank for low-profile installation. Oil, chemical, water and flame resistant. Features progressive resistance technology. Resistance increases as collision force increases. Mounting points for optional mechanical attachment to column. Easy to install and secure. Adjustable Straps: approx. 3 metres in length. All components interlock on assembly.
Specifications Description: Car park bump protector. Material:
Specifically engineered ARPRO® material.
Finish:
High visibility safety yellow.
Diameter:
Fits columns up to 610 x 610mm.
Height:
1 metre.
Weight:
5kgs.
Installation
Simple one person installation with straps included.
PART No.
DESCRIPTION
PS-Y-KIT
Park Sentry Kit – Yellow
PS-Y-CORNER
Park Sentry corner – Yellow
PS-Y-PLANK
Park Sentry plank – Yellow
PSS-4000-BR
Park Sentry – additional straps
ASSET PROTECTION
Park Sentry® is manufactured from specifically engineered ARPRO® material. At just 40mm thick Park Sentry® maximises available car park space.
Corner modules are made with extra thickness and density where collisions are most likely to occur.
Each kit is supplied with a pair of 3 metre long adjustable straps.
Panel modules feature progressive resistance technology. Resistance increases as collision force increases. Copyright © 2012 Barrier Group Pty. Ltd.
Superior material protects vehicles and columns! Made of ARPRO®, a high tech material specifically engineered to absorb impact. Oil, chemical, water and flame resistant and 100% recyclable. Thin design virtually adds space to parking structures – vehicles can now park closer to columns. Interlocks at corners for edge-to-edge protection. Specially designed flat panels give progressive resistance, offering soft protection for slight bumps, and more resistance when needed to absorb harder collisions. Extra thickness at corners to resist damage at the most vulnerable spots.
Reduces garage maintenance, improves appearance!
29 SECTION
02
CUT
INSTALL
Hides damaged columns and walls without an expensive paint job. Seamless design modernizes the look of any garage. Protects concrete columns from damage.
Customizable to fit any column! Cuts easily to fit around poles, pipes and curbs. Extensions available to fit flat walls and larger columns.
Installation: No tools required. Modular tools interlock using the included key-lock system. Can be mechanically attached to walls for added security. Replacement pieces can be attached without replacing the entire structure. STRAP
ASSET PROTECTION
Copyright © 2012 Barrier Group Pty. Ltd.
COLUMN SENTRY®
30 SECTION
02
Column Sentry® is the most complete impact protection available to fully protect your investments, your facility, your equipment and your people. Column Sentry® absorbs impacts by surrounding your columns with a unique cushion of air. One person can install and remove for maintenance in seconds. They are available in a range of standard sizes that fit common column sizes. Moulded from high impact polyethylene in bright safety yellow with contrasting black straps and U.V. stabilised for indoor or outdoor use. Column Sentry’s unique design can be used on square, round or ‘H’ pattern columns offering both versatility and durability. The air vent system allows air to escape during impact, allowing the column protector to absorb impact and then return to its original form.
Value features: Protects square, round or ‘H’ columns. Incredibly tough. Highly visible safety yellow colour. U.V. stabilised. Easily installed (no tools required). Surprisingly cost-effective and maintenance free. Extremely versatile and durable. Chemical resistant, non-conductive & waterproof. Simply remove for maintenance.
Specifications Description: Polyethylene column protector. Material: Finish: Size:
Weight:
Low-density polyethylene. 2 x black retaining straps. Safety yellow (solid colour). 600D x 1070H physical size. To suit column – 200 x 200 or – 250 x 250 or – 300 x 300 or 840D x 1070H physical size. To suit column – 350 x 350 or – 410 x 410 or
200mm ø. 250mm ø. 300mm ø. 350mm ø. 410mm ø.
10kgs up to 41kgs.
Simple two-piece design provides repeated protection for the structural integrity of your building.
No tools required, one person can install in seconds. Can be simply removed or replaced for maintenance.
Moulded from bright yellow high impact polyethylene for maximum durability. Semi-flexible and stress crack resistant.
Ideal in a variety of environments – parking garages, warehouses or factories. Indoors or outdoors.
Installation: Simple one person installation with self-gripping straps.
PART No.
DESCRIPTION
CS60107-20S
To suit columns up to 200mm x 200mm or 200mm dia. Overall size 600mm dia. x 1070mm high
CS60107-25S
To suit columns up to 250mm X 250mm or 250mm dia. Overall size 600mm dia. x 1070mm high
CS60107-30S
To suit columns up to 300mm x 300mm or 300mm dia. Overall size 600mm dia. x 1070mm high
CS84107-35S
To suit columns up to 350mm x 350mm or 350mm dia. Overall size 840mm dia. x 1070mm high
CS84107-41S
To suit columns up to 410mm x 410mm or 410mm dia. Overall size 840mm dia. x 1070mm high
ASSET PROTECTION
Copyright © 2012 Barrier Group Pty. Ltd.
SECTION
03
FORKLIFT SEPARATION
This section contains a wide range of options for controlling the movement and access of pedestrians into hazardous or sensitive areas. A particular focus is on forklift separation using products like Ball-fence, Channel Rail or our revolutionary new ‘Q-Fence’ panel system. ‘Q-Fence’ interacts with our Menni & Ball-fence products to produce truly innovative pedestrian management solutions. Alternatively, ‘Q-Fence’ stands alone as a stackable and free-standing crowd control barrier (see page 112).
You may also be interested in pages: 20
MENNI
25
SHOCK ABSORBING GUARD RAILS
81
EXPANDING BARRIERS
106
ZONE FENCING
BALL-FENCE – Hand rail system Ball-fence is a modular handrail system that includes stanchions in a range of configurations, a top (hand) raill and a centre (knee) rail. Design flexibility is a strength of the Ball-fence. Usually the Ball-fence components are assembled on site. If required they can be partially assembled in our factory and delivered to site in sections for simple fixing. (Charges apply).
Value features:
32 SECTION
03
Design flexibility. Components are all hot dip galvanised. Complies to AS1657. Suitable for outdoor use. Self closing gates available.
Specifications: Description:
Tubular handrail system.
Material:
Post 48.3mm OD (40mm N.B) Handrail 42.4mm OD (32mm N.B) Kneerail 33.7mm OD (25mm N.B)
Finish:
Hot dip galvanised.
Height:
Ground to centre of handrail 1015mm. Ground to centre of kneerail 555mm.
Spacing:
Max post spacing 2 metres centre to centre.
PART No.
DESCRIPTION
BFHR
Hand rail 32 N.B. x 6 metres
BFKR
Knee rail 25 N.B. x 6 metres
BFEP-SM
End Post (Surface mount)
BFEP-BG
End Post (Cored)
BFTP-SM
Through Post (Surface mount)
BFTP-BG
Through Post (Cored)
BFCP-SM
Corner Post (Surface mount)
BFCP-BG
Corner Post (Cored)
BFGP90SM-G
Ball-fence Gate Post 90 x 1050mm – Galvanised
BFB32
Bend 90° x 32 N.B.
BFB25
Bend 90° x 25 N.B.
See also Ball-fence Gates on page 33.
BFHR Handrail
BFSJ32 Slip Joiner
BFKR Kneerail
BFSJ25 Slip Joiner
300mm
BFCB
Closure Bend
BFGH
Additional 1.5 metre gate hoop
BFSJ32
Slip Joint 32 N.B.
BFSJ25
Slip Joint 25 N.B.
BFTP-AF
Through post adjustable foot
BFCP-AF
Corner post adjustable foot
BFTP
Taper Pin
90
See also Ball-fence plus Menni on page 34.
BFGH Gate Hoop
BFCB Closure Bend
BFB32 Bend 90°
BFB25 Bend 90°
900
460mm 1015mm
555mm
BFGP90SM-G 90mm Gate Post
BFEP-SM End Post
FORKLIFT SEPARATION
BFTP-AF Adjustable Foot
BFEP-BG End Post
BFTP-SM Through Post
BFTP-BG Through Post
BFCP-SM Corner Post
BFCP-AF Adjustable Foot
BFCP-BG Corner Post
Copyright © 2012 Barrier Group Pty. Ltd.
BALL-FENCE GATES A self closing gate system that can be supplied with new Ball-fence installations or retrofitted to existing Ball-fence sites. Ball-fence Gates can be installed in minutes for left or right hand operation, opening inwards or outwards. With adjustable hoop length and return gas strut, it ensures total flexibility of use. Hot dip galvanised or powder coated for indoor or outdoor use.
Gate hoops Ball-fence Gates come complete with a standard galvanised tubular hoop (42.4mm dia.) to suit a maximum 1500mm opening for single gates or 3000mm for double gates. Hoops can be simply cut down to any length and fitted into the receiver tubes on the gate assembly.
33 Single galvanised gate (BFG) shown. SECTION
03
Value features: Gas strut self closure Fully adjustable. Built-in gate stop. Swing inward or outward. Suits openings up to 3.0 metres (double gates). Use as single or double gates. Can be retrofitted to existing sites. Hot dip galvanised or powder coated finish. Simple installation.
Specifications Description:
Ball-fence adjustable gate system.
Material:
Heavy steel construction. Hoop – 42.4 OD (32mm NB) medium gauge tube. (Optional gate post 90 x 1050mm).
Weight:
Complete assembly with 1.5 metre hoop 18kgs.
Finish:
Hot dip galvanised or powder coated.
Height:
Matches up to hand & knee rails on fence.
Opening:
Single gates up to 1.5 metres. Double gates up to 3.0 metres. Bolted to existing posts or any flat or round surfaces
Installation:
Double powder coated gate (BFGP) shown.
WARNING © Barrier Group Pty. Ltd. takes the protection of its intellectual property (IP) seriously and will not hesitate to pursue legal action against any individual, group or organization attempting to steal, copy or duplicate any of its proprietary designs OR anyone who imports, sells or distributes illegal copies or duplicates of its proprietary designs.
Gas strut provides gentle self-closing action.
IT’S AGAINST THE LAW – AVOID THE PAIN!
PART No.
DESCRIPTION
BFG
Ball-fence gate (complete with hoop) – Galvanised
BFG-P
Ball-fence gate (complete with hoop) – Powder coated
BFGP90SM-G
Ball-fence Gate Post 90 x 1050mm – Galvanised
BFGH
Additional 1.5 metre gate hoop
FORKLIFT SEPARATION
Built-in gate stop.
Gas strut closure.
Adjustable hoop length.
Copyright © 2012 Barrier Group Pty. Ltd.
BALL-FENCE plus MENNI Menni is a set of super tough injection moulded modules that plug together like giant Lego™ in any combination. Applications include protecting physical assets by preventing vehicles from coming into contact with them. Alternatively, when used with Ball-fence, Menni prevents the encroachment of forklifts and other vehicles into pedestrian zones, while protecting the Ball-fence. Menni is designed and developed in Australia from high tech Linear Low Density Polyethylene (LLDPE) with solid hi-vis safety yellow colour. The super tough impact absorbing modules won’t fade, rot, rust or crack and have built-in reflectors for low light environments. See page 41 for installation procedure.
34 Value features: SECTION
03
Designed to comply with AS1657:1992 for walkways. Solid colour, U.V. stabilised. Supplied with all fixings and connectors. Slip resistant feature moulded into top surface. Modular components allows modification or replacement at any time. Total flexibility with endless applications.
Asset and pedestrian protection.
Specifications Description:
Menni modular asset protection system.
Material:
Injection moulded Linear Low Density Polyethylene (LLDPE).
Finish:
Solid colour – Hi-vis safety yellow.
Dimensions:
H100 x W150mm x L540mm (see Section 9 for full details)
Weight:
Approx. 4kgs per metre. Menni end module.
No. of fixings: 2 per module (supplied). Connector / plugs:
3 per module (supplied).
Recommended spacing 200mm
100mm Menni body module.
150mm MORE INFORMATION ON MENNI See Page 20.
PART No.
DESCRIPTION
BME-Y
Menni end module – Yellow
BMB-Y
Menni body module – Yellow
BMT-Y
Menni T-intersection module – Yellow
BMC-Y
Menni 90 degree corner module – Yellow
BMR
Optional top reflector plugs
FORKLIFT SEPARATION
Menni ‘T’ module.
Menni corner module.
Copyright © 2012 Barrier Group Pty. Ltd.
U-BARS – Double rail A modular one-piece design U-bar barrier with fully welded knee rail. Suitable for pedestrian barriers at crossing points or traffic management in and around factory/warehouse areas. Manufactured from 3mm wall steel pipe 48mm in diameter and hot dip galvanised as standard. Available in either surface mount or below ground models. All models stand 1040mm high above ground with a fully welded knee rail at 580mm high. Ideal for schools, shopping centres, walkways or warehouses.
One-piece design
35
The fully welded and galvanised one-piece construction makes installation a quick and simple operation. No assembly required. U-Bars supplied hot dip galvanised.
SECTION
03
Value features: Available in three sizes in either below ground or surface mount. Heavy 3mm wall, 48.3 diameter pipe. Fully welded one-piece construction. Hot dip galvanised for outdoor use. No assembly required. Ready for installation.
Specifications Description:
One-piece double rail U-bars.
Material:
Steel pipe 48.3mm dia. with 3mm wall.
Finish:
Hot dip galvanised (powder coating optional).
Height:
Above ground 1040mm. Below ground 300mm.
Weight:
UBD100 approx. 16kgs. UBD150 approx. 19.5kgs. UBD200 approx. 23.5kgs.
Installation:
Surface mount models base plate 150 x 75 x 10mm. Below ground models come with welded concrete starter bars.
Fixings:
Supplied with surface mount models.
48.3mm
100
0/
150
0/
200
0m
m
3mm wall 1040mm
U-BAR DOUBLE RAIL SHOWING SURFACE MOUNT POSTS
48.3mm 100
0/
150
0/
200
0m
m
3mm wall
PART No.
DESCRIPTION
UBD100SM-G
1.0 metre surface mount double rail U-bar (Galvanised)
UBD100BG-G
1.0 metre below ground double rail U-bar (Galvanised)
UBD150SM-G
1.5 metre surface mount double rail U-bar (Galvanised)
UBD150BG-G
1 .5metre below ground double rail U-bar (Galvanised)
UBD200SM-G
2.0 metre surface mount double rail U-bar (Galvanised)
UBD200BG-G
2.0 metre below ground double rail U-bar (Galvanised)
FORKLIFT SEPARATION
1040mm
300mm
Concrete starter bars (2 of)
U-BAR DOUBLE RAIL SHOWING BELOW GROUND POSTS Copyright © 2012 Barrier Group Pty. Ltd.
POST AND RAIL – Heavy duty Post & Rail is a modular barrier system for use in car parks, factories, shopping centres, etc. or anywhere vehicles and pedestrians need to be segregated. Posts are 1050mm high above ground. Rails are available in 2, 3, 4, 5, or 6 metre lengths. The modular design of ‘Post & Rail’ ensures barriers can be quickly erected with a minimum of disruption. Suitable for either flat or sloping surfaces.
50mm
100mm
Value features:
36
Strong 90mm or 140mm diameter posts with 5mm thick walls. 6mm thick base plates with 4 bolt fixing. Galvanised prior to powder coating. Sculpted hand rails in a range of lengths. Suitable on slopes or ramps.
500mm
5mm wall
1050mm
SECTION
03
100mm
Specifications Description: Modular Post & Rail system. Material:
Posts 90 or 140mm diameter, 5mm wall. Rails 100 x 50mm tube, 2.5mm wall.
Finish:
Galvanised and safety yellow powder coat.
Height:
Post height 1050mm above ground Rail centres 500mm. Rail lengths: 2-6 metres. Weight: Installation
470mm
Posts 90mm 9kgs / 140mm 25kgs Rails 4.25kgs per metre. 4 x 12 x 60mm masonry anchors per post (supplied).
90mm or 140mm
6mm PART No.
DESCRIPTION
PR90SMD PR140SMD PR90BGD PR906 PR905 PR904 PR903 PR902
Surface mount post 90mm diameter Surface mount post 140mm diameter In-ground post 90mm diameter 6.0 metre rail (replacement) requires 3 posts 5.0 metre rail (replacement) requires 3 posts 4.0 metre rail (replacement) requires 2 posts 3.0 metre rail (replacement) requires 2 posts 2.0 metre rail (replacement) requires 2 posts
225mm diameter
Using standard lengths any layout is possible.
FORKLIFT SEPARATION
Copyright © 2012 Barrier Group Pty. Ltd.
ECONO-RAIL – Standard duty Econo-rail is a flexible and economical pedestrian control system that is simple to install. It consists of surface mount posts and rails in 1, 1.5 or 2 metre lengths. Rails can be cut on site for special lengths The system comes complete with connectors and fixings. Ideal where an attractive and practical solution is required to control the movement of pedestrians.
Value features: All components galvanised prior to powder coating. Powder coated rails available in three standard lengths or can be cut down on site. Comes with all fittings and fixtures. Rails can come off posts at any angle for changes in direction using our unique post to rail adapters. Highly visible safety yellow powder coated finish.
37 Econo-rail can be configured to any layout.
Specifications Description:
Modular economy post & rail system.
Material:
Posts 63.5mm diameter, 1.6mm wall, 1050mm high. Rails 30 x 60mm oval galvanised tube with 1.6mm wall.
Finish:
Galvanised and safety yellow powder coat.
Height:
Post height 1050mm.
Rail lengths:
1.0, 1.5, or 2.0 metres.
Weight:
Posts 4kgs / Rails 2kgs metre.
Installation
3 off 10 x 50mm masonry anchors per post (supplied).
PART No.
DESCRIPTION
ER63-SM
Surface mount post
ER631
1.0 metre rail with connectors
ER6315
1.5 metre rail with connectors
ER632
2.0 metre rail with connectors
All rails and posts are galvanised and powder coated.
Rail to post connection.
Econo-rail can be disassembled and relocated as required.
FORKLIFT SEPARATION
6mm thick base plate.
Copyright © 2012 Barrier Group Pty. Ltd.
SECTION
03
CHANNEL RAIL Channel Rail is a modular forklift separation system. We developed channel rail for one of Australia’s largest retail companies for use in their new ‘mega’ distribution centres around the country. Our client brief was for a system which was completely modular, required no on-site welding during installation and required only basic hand tools to replace damaged components. A key feature was that it had to protect the pedestrians from forklift tines, as forks move about the site.
38
This latter feature is accomplished by using an outwardly facing 200mm high by 6mm thick galvanised channel to trap the fork tines and prevent them deflecting up and into the pedestrian traffic.
Value features: SECTION
03
Quick & simple to install. Completely modular design. Post & rails powder coated safety yellow. All components are hot dip galvanised. All fixings supplied. Full range of spare parts available. Protects lower limbs from fork tines. Can be customised if required. 6mm thick capture channel helps protect pedestrians.
Specifications: Description:
Modular forklift separation system.
Material:
Posts – 60.3mm dia. x 1020mm high, 3.6mm wall. Safety yellow powder coat. Rails – 30 x 60 x 1.6mm galvanised oval tube. Safety yellow powder coat. Channel – Heavy duty 200 x 75 x 6mm channel galvanised finish.
Weight:
Posts 7.4kgs. Rails 2kgs per metre. Channel 15.5kgs per metre.
Installation:
3 off 12 x 60mm masonry anchors per post (supplied).
PART No.
DESCRIPTION
CR10K
1.0m Channel rail kit (2x surface mount posts, 1 x 1m floor channel, 2x 1m rails)
CR15K
1.5m Channel rail kit (2x surface mount posts, 1 x 1.5m floor channel, 2x 1.5m rails)
CR20K
2.0m Channel rail kit (2x surface mount posts, 1 x 2m floor channel, 2x 2m rails)
CR30K
3.0m Channel rail kit (3x surface mount posts, 1 x 3m floor channel, 2x 3m rails)
CR60K
6.0m Channel rail kit (5x surface mount posts, 2 x 3m floor channel, 2x 6m rails)
CR60SM
Surface mount post (replacement)
CR201
Floor channel 1.0 metre (replacement)
CR601
Rail 1.0 metre (replacement)
CR2015
Floor channel 1.5 metre (replacement)
CR6015
Rail 1.5 metre (replacement)
CR202
Floor channel 2.0 metre (replacement)
CR602
Rail 2.0 metre (replacement)
CR203
Floor channel 3.0 metre (replacement)
CR603
Rail 3.0 metre (replacement)
CR206
Floor channel 2 x 3.0 metre (replacement)
CR606
Rail 6.0 metre (replacement)
KIT9
Fixings (1 post)
SIDE VIEW
FORKLIFT SEPARATION
FRONT VIEW
Rail Bracket fully welded at post
1020mm
200mm
Copyright © 2012 Barrier Group Pty. Ltd.
POST-Q – Fence system Post-Q is a modular pedestrian separation fence system that can absorb minor impacts, is non-conductive, corrosion and abrasion resistant and can be used indoors and outdoors. Using the galvanised steel posts provided, Post-Q is simple to install with a high level of design flexibility. Strong galvanised posts and moulded polyethylene panels with solid colour, ensure an extremely durable fence system. Post-Q is highly visible, won’t fade, rot, rust or crack and is almost completely maintenance free.
Value features: Strong, flexible, lightweight and highly visible. Ease of installation with design flexibility. Solid moulded colour. Virtually maintenance free. Maximum panel opening 80mm (child safe). Panels can be cut down as required.
Specifications: Description:
Modular post-mounted pedestrian separation fence.
Material:
Post-Q – Blow moulded polyethylene. Posts – Surface mount galvanised steel 875mm long.
Finish:
Post-Q – Solid colour safety orange. Posts – Hot dip galvanised.
Height:
Floor to top of panel 1000mm.
Weight:
Panel (including posts) – 14kgs approx.
Fixings:
Supplied with masonry anchors 16 x 65mm.
Galvanised Posts:
The internal posts used in Post-Q are manufactured from 48.3mm diameter hot dip galvanised steel with a welded base plate for surface mounting. Post mounting leaves the Q-Panels elevated above the floor for ease of cleaning.
39 SECTION
03 Post-Q – fixed posts with flexible panels.
Sliding panel connector for uneven ground.
Galvanised mounting posts.
Galvanised steel post
Q-fence panel
M16 x 65mm fixing
PART No. PQ2130 QFP-SM
DESCRIPTION Post-Q fence panel with 2 galvanised posts Additional Q-fence posts with fixings
FORKLIFT SEPARATION
Recessed reflective panels.
Cross-section.
Copyright © 2012 Barrier Group Pty. Ltd.
MENNI-Q – Fence system Menni-Q is a modular pedestrian separation fence system that is impact absorbing, non-conductive, corrosion and abrasion resistant and can be used indoors and outdoors. The modular nature of Menni-Q provides a high degree of design flexibility. The components are moulded from Linear Low Density Polyethylene (LLDPE) with solid colour. This ensures an extremely durable fence system that is highly visible, won’t fade, rot, rust or crack and is almost completely maintenance free.
Value features:
40 SECTION
03
Strong, flexible, light weight and highly visible. Ease of assembly with design flexibility. Solid moulded colour. Virtually maintenance free. Maximum panel opening 80mm (child safe). Panels can be cut down as required. Drainage channels prevent water pooling. Menni-Q – strength with flexibility.
Specifications: Description:
Modular pedestrian separation fence.
Material:
Menni-Q – Blow moulded polyethylene. Menni modules – Injection moulded polyethylene. Internal posts – Fibre reinforced plastic.
Finish:
Menni-Q – Solid colour safety orange. Menni – Solid colour safety yellow.
Height:
Floor to top of panel 1000mm.
Panel length: 2130mm. Weight:
Panels & Menni – 10kgs/metre approx.
Fixings:
Supplied.
FRP posts:
The internal posts used in Menni-Q are manufactured from 50mm diameter Fibre Reinforced Plastic with a 5mm thick wall. FRP combines incredible strength with flexibility, allowing the Menni-Q fence to absorb considerable impact without damage.
Sliding panel connector for uneven grounds.
Moulded in drainage channels to avoid water pooling.
FRP composite post
PART No. MQ2130 BME-Y BMB-Y BMT-Y BMC-Y
Q-fence panel
DESCRIPTION Menni-Q fence panel with posts – Safety Orange
Menni fixing Menni module
Menni end module – Yellow Menni body module – Yellow Menni T-intersection module – Yellow Menni 90 degree corner module – Yellow
FORKLIFT SEPARATION
Recessed reflective panels.
Cross-section.
Copyright © 2012 Barrier Group Pty. Ltd.
IP18
MENNI Installation Procedure: 1. Using a chalk line, set out and position Menni modules and connect together with connector plugs supplied. With a 10mm drill bit and impact drill, pilot drill the mounting holes for each module. (PHOTO’S 1 & 2). 2. Move the modules to one side and drill pilot holes with a 14mm drill bit 100mm deep. (Note: If using concrete screw bolts instead of plastic plugs and coach screws drill size is only 10mm). Clean dust from holes, insert plastic Hilti plugs and hammer flush with floor. (PHOTO’S 3 & 4).
1.
2.
41 SECTION
03
3. Reposition Menni modules over holes and insert fixings making sure to use the large diameter washers supplied. (PHOTO 5).
4. Using an appropriate sized socket wrench or impact driver, tighten fixings. (PHOTO 6).
3.
4.
5.
6.
5. Go over completed installation and tighten all connections. 6. Fit blanking plugs supplied into fixing sockets and clean the site to complete your installation. Note: Optional reflector plugs are available if required for improved night time visibility. (PHOTO 7).
Notes: • The moulded plastic caps supplied double as hole plugs and module connectors. • To achieve long, straight lines use a string or chalk line. • On completion check all fixings are tight.
Plastic Hilti plug and coach screw.
WHAT YOU WILL NEED • • • •
Tape measure and string line. Impact drill and masonry bits. Socket wrench or impact driver. Hammer.
Concrete screw bolt.
7. Shown with optional top reflector plug.
FORKLIFT SEPARATION
The two types of fixings available. Copyright © 2012 Barrier Group Pty. Ltd.
Custom height bar installation.
Custom core-drilled removable barrier.
Custom De-Fence machinery guarding.
FORKLIFT SEPARATION
Custom bollard installation.
Custom crowd control barrier (Werribee Mansion).
Custom single swing gate.
Copyright Š 2012 Barrier Group Pty. Ltd.
SECTION
04
WORKPLACE SAFETY & SOLUTIONS
Warehouse racking protection, anti-slip products, modular shelving, anti-fatigue mats and more. Check out our expanded range of safety mirrors: not only do we have the best prices we now have a wider range! While we still have our popular indoor and outdoor mirrors with polycarbonate lenses, we have now added high visibility models with class 1 reective rims and also stainless steel designs.
You may also be interested in pages: 07
SHOCK ABSORBING BOLLARDS
20
MENNI
32
BALL-FENCE
81
EXPANDING BARRIERS
44 SECTION
04
CONVEX MIRRORS – Outdoor
CONVEX MIRRORS – Indoor
An extremely durable weather-proof mirror suitable for road and pedestrian traffic applications, distribution depots and parking areas. Unbreakable polycarbonate face with high visibility orange visor. All of these mirrors come complete with both wall mount brackets and post mount brackets to suit a 60mm diameter post. Additional 60mm wall mount brackets are available if required.
These unbreakable polycarbonate mirrors come complete with both wall mount brackets and post mount brackets to suit a 60mm diameter post. Additional 60mm wall mount brackets are available.
PART No.
DESCRIPTION
PART No.
DESCRIPTION
MC450OD MC600OD MC800OD MC1000OD SP2800 CAP60 MCB60 MCB4060E
Outdoor convex mirror – 450mm Outdoor convex mirror – 600mm Outdoor convex mirror – 800mm Outdoor convex mirror – 1000mm Galvanised post – 2800 x 60mm Galvanised post cap to suit 60mm sign post Wall mount bracket for MC450/600 Extendable stand-off arm 400 to 600mm
MC300ID MC450ID MC600ID MC800ID SP2800 CAP60 MCB60 MCB4060E
Indoor convex mirror – 300mm Indoor convex mirror – 450mm Indoor convex mirror – 600mm Indoor convex mirror – 800mm Galvanised post – 2800 x 60mm Galvanised post cap to suit 60mm sign post Wall mount bracket for MC450/600 Extendable stand-off arm 400 to 600mm
CONVEX MIRRORS – Hi-vis Round
CONVEX MIRRORS – Hi-vis Roundtangular
Tough shatter proof polycarbonate mirror lens with durable moulded fibreglass backing. The outer rim of the lens which is moulded as one piece with the backing panel, has the added advantage of being highly visible at night or in low light, due to the premium grade class 1 reflective surface. Suitable for indoor or outdoor applications to increase visibility and eliminate blind corners. Supplied with both wall and post mount brackets to suit 60mm diameter posts.
The Hi-vis Roundtangular mirror has all the same structural features as the round model above. The elongated shape allows a wider field of view while allowing a more compact shape. Also suitable for indoor or outdoor use and is supplied with mounting brackets. Supplied with both wall and post mount brackets to suit 60mm diameter posts. The one-piece outer rim with class 1 reflective is moulded into the backing panel.
PART No.
DESCRIPTION
PART No.
DESCRIPTION
MC450HV MC600HV MC800HV MC1000HV SP2800 CAP60 MCB60 MCB4060E
Hi-vis round indoor/outdoor convex mirror – 450mm Hi-vis round indoor/outdoor convex mirror – 600mm Hi-vis round indoor/outdoor convex mirror – 800mm Hi-vis round indoor/outdoor convex mirror – 1000mm Galvanised post – 2800 x 60mm Galvanised post cap to suit 60mm sign post Wall mount bracket for MC450 / 600 Extendable stand-off arm 400 to 600mm
MC570RHV MC640RHV MC830RHV MC970RHV SP2800 CAP60 MCB60 MCB4060E
Hi-vis roundtangular indoor/outdoor convex mirror – 390 x 570mm Hi-vis roundtangular indoor/outdoor convex mirror – 440 x 640mm Hi-vis roundtangular indoor/outdoor convex mirror – 550 x 830mm Hi-vis roundtangular indoor/outdoor convex mirror – 660 x 970mm Galvanised post – 2800 x 60mm Galvanised post cap to suit 60mm sign post Wall mount bracket for MC450/600 Extendable stand-off arm 400 to 600mm
WORKPLACE SAFETY & SOLUTIONS
Copyright © 2012 Barrier Group Pty. Ltd.
TELESCOPIC MOUNTING ARM
For use with polycarbonate mirrors.
There often situations where wall mount mirrors need an extended stand-off mount to clear obstacles or see around doorways or corners etc. This telescopic extension arm allows the mirror to be mounted to walls or columns and adjusted from 400 to 600mm of stand-off. Alternatively due to the design of the base plate it can be bolted to most types of pallet racking without the need to drill holes, thereby not compromising the structural integrity of the racking. Constructed from mild steel and zinc plated for indoor or outdoor use. Wall fixings NOT included. PART No.
DESCRIPTION
MCB4060E
Extendable stand-off arm 400 to 600mm
CONVEX MIRRORS – Stainless Steel
Stainless steel offers the ultimate in long term weather and impact resistance for convex mirrors. They are particularly suited to outdoor environments where vandalism is likely to occur, including public areas, roads, railway stations, airports and prisons etc. Supplied with heavy duty hot dip galvanised bracket to suit 75mm post.
45 PART No.
DESCRIPTION
MC600SS MC800SS MC1000SS MCB75 SP2800/75 CAP75
Stainless steel convex mirror – 600mm Stainless steel convex mirror – 800mm Stainless steel convex mirror – 1000mm Wall mount bracket for MC600/800/1000 Galvanised post – 2800 x 75mm Galvanised post cap to suit 75mm sign post
CONVEX MIRRORS – Indoor Dome
VEHICLE INSPECTION MIRROR
An economical, lightweight alternative where general surveillance of a broad area is required. Full domes may be suspended on chains or fixed directly to the ceiling and provide a 3600 view. Half domes provide a 1800 view and corner domes provides a 900 view.
Ideal for inspection below and above vehicles entering security areas. This light weight inspection mirror comes complete with 300mm diameter unbreakable polycarbonate lens, extendable aluminium handle, built-in torch for reflected light and triple snap on castors for working below vehicles. When not in use the mirror folds and is stored in its own convenient carry bag.
PART No.
DESCRIPTION
D60360 D60180 D6090
Indoor dome convex mirror – 600mm Indoor half dome convex mirror – 600mm Indoor corner dome convex mirror – 600mm
WORKPLACE SAFETY & SOLUTIONS
PART No.
DESCRIPTION
MC300IN
Inspection mirror – 300mm
Copyright © 2012 Barrier Group Pty. Ltd.
SECTION
04
ANTI SLIP TAPE Reduce accidents due to slipping. Apply to any clean dry surface, eg. stair treads, ramps or hazardous floors. Durable self adhesive backed grit surface in a range of colours, in either 50 or 100mm widths.
PART No.
DESCRIPTION
AT50B
Anti slip tape 50mm x 5.0 metre – Black
AT100B
Anti slip tape 100mm x 5.0 metre – Black
AT50Y
Anti slip tape 50mm x 5.0 metre – Yellow
AT100Y
Anti slip tape 100mm x 5.0 metre – Yellow
AT50YB
Anti slip tape 50mm x 5.0 metre – Yellow/Black
AT50B / AT100B.
AT50Y / AT100Y.
AT50YB.
ANTI SLIP FRP
46 SECTION
04
FRP Anti Slip stair nosing, panel and ladder rungs are pre-finished, ready to install safety products designed to prevent slip accidents in the most harsh and extreme conditions. Manufactured from a composite fibreglass they are easily fitted over existing steps, ladder and walkways to create the toughest and most durable safety solution available. FIXING DETAIL – WEB GRATING.
Why Fibreglass (FRP) is better Produced in a one-step manufacturing process where a colour pigmented, fire retardant resin is interspersed with layers of immensely strong interwoven glass fibre. A diamond hard fused alumina anti-slip grain is forced under pressure into the base mix while it is still wet. A final resin layer laid over the top completes the entire composite mix before being oven cured until fully set.
Value features: Won’t chip or delaminate. No steel to corrode or rust. Dimensionally stable in all temperatures. Highly resistant to chemical attack. Available in a wide range of sizes. Manufactured in Australia.
FRP stair nosing.
ST/ST saddle assembly (FIX1172).
Specifications: Description:
Industrial grade anti slip
Material:
Fibreglass Composite with integrated anti-slip grit.
Finish:
Safety Yellow.
Dimensions:
See P/N description on next page.
Installation:
Mechanically fixed or adhered.
FRP ladder rung.
WORKPLACE SAFETY & SOLUTIONS
FRP panels.
Copyright © 2012 Barrier Group Pty. Ltd.
STAIR NOSING
FLOOR PLATES / PANELS
LEN
GTH
PART No.
DESCRIPTION
BSN45075
FRP stair nosing 450 x 75 x 20mm – Yellow
BSN60075
FRP stair nosing 600 x 75 x 20mm – Yellow
BSN75075
FRP stair nosing 750 x 75 x 20mm – Yellow
BSN90075
FRP stair nosing 900 x 75 x 20mm – Yellow
BSN103075
FRP stair nosing 1030 x 75 x 20mm – Yellow
BSN120075
FRP stair nosing 1200 x 75 x 20mm – Yellow
BSN450150
FRP stair nosing 450 x 150 x 20mm – Yellow
BSN600150
FRP stair nosing 600 x 150 x 20mm – Yellow
BSN750150
FRP stair nosing 750 x 150 x 20mm – Yellow
BSN900150
FRP stair nosing 900 x 150 x 20mm – Yellow
BSN1030150
FRP stair nosing 1030 x 150 x 20mm – Yellow
BSN1200150
FRP stair nosing 1200 x 150 x 20mm – Yellow
FIX1172
ST/ST saddle assembly (1 x saddle, M6 x 35mm bolt & M6 nut)
PART No.
DESCRIPTION
BFP200600
FRP floor plate 200 x 600mm – Yellow
BFP200750
FRP floor plate 200 x 750mm – Yellow
BFP200900
FRP floor plate 200 x 900mm – Yellow
BFP600600
FRP floor plate 600 x 600mm – Yellow
BFP600750
FRP floor plate 600 x 750mm – Yellow
BFP600900
FRP floor plate 600 x 900mm – Yellow
BFP6001200
FRP floor plate 600 x 1200mm – Yellow
BFP12001200
FRP floor plate 1200 x 1200mm – Yellow
BFP12002400
FRP floor plate 1200 x 2400mm – Yellow
FIX1172
ST/ST saddle assembly (1 x saddle, M6 x 35mm bolt & M6 nut)
H PT E D
LADDER RUNG
PART No.
DESCRIPTION
BLR20023
FRP ladder rung 200 x 23mm – Yellow
BLR20028
FRP ladder rung 200 x 28mm – Yellow
BLR20033
FRP ladder rung 200 x 33mm – Yellow
BLR20038
FRP ladder rung 200 x 38mm – Yellow
BLR30023
FRP ladder rung 300 x 23mm – Yellow
BLR30028
FRP ladder rung 300 x 28mm – Yellow
BLR30033
FRP ladder rung 300 x 33mm – Yellow
BLR30038
FRP ladder rung 300 x 38mm – Yellow
BLR45023
FRP ladder rung 450 x 23mm – Yellow
BLR45028
FRP ladder rung 450 x 28mm – Yellow
BLR45033
FRP ladder rung 450 x 33mm – Yellow
BLR45038
FRP ladder rung 450 x 38mm – Yellow
FIX1172
ST/ST saddle assembly (1 x saddle, M6 x 35mm bolt & M6 nut)
NOTE: All part numbers listed are INDUSTRIAL GRADE texture.
WORKPLACE SAFETY & SOLUTIONS
Copyright © 2012 Barrier Group Pty. Ltd.
47 SECTION
04
IP02
FRP ANTI SLIP Technical Data
GRADES AVAILABLE
SIZES AVAILABLE
The super tough abrasive grit used to form the high traction surface on FRP Anti Slip is one of the hardest compounds known to man. Fused Alumina Grit is bound within the glass reinforced body of the FRP Anti Slip and presents a top surface with almost diamond hard characteristics.
FRP Anti Slip is offered in thin, flat, flexible sheets in standard size of 1.2m x 2.4m. For larger runs custom sizing can be accommodated.
MOHS scale comparison Diamond
10
Silica Carbide
9.7
Fused Alumina
9.4
Hard Quartz
7.0
Steel
6.0
A range of grit sizes are available which are categorized in the following six grades, together with typical applications:
48
The thickness of FRP Anti Slip will vary dependent upon the grit texture specified. The coarser the grit – the thicker the cover, and will range between 2mm and 3mm from the base of the FRP Anti Slip to the points of imbedded grit.
• INDUSTRIAL – For most industrial applications. As different manufacturers have different names for each grade of their anti slip material, the following comparisons of FRP Anti Slip grading have been used.
COLOURS AVAILABLE
Grade
U.S. Grading
Microns (average)
FRP Anti Slip is available in two ‘in stock’ standard colours, SAFETY YELLOW and BLACK.
Fine
60 mesh
250
Industrial
16 mesh
356
SECTION
04
• FINE – Commercial buildings, swimming pools, vehicle applications.
PHYSICAL PROPERTIES – FRP
Additionally other ‘on request’ colours are available, RED, WHITE, GREEN, BLUE and ORANGE.
Glow in the dark capable FRP Anti Slip is available. Permanently adhered directional and safety signage can be included. Signage will look off white to green in daylight and glow bright green/yellow in darkness.
FRP Anti Slip is manufactured entirely by hand in a one-step manufacturing process then trimmed and cut to size. Uniquely it remains permanently flexible and able to form over quite tight compound curves. By incorporating all of the separate elements of the finished product into one seamless fibreglass composite material we are able to build the strongest and most durable product available on today’s market. The general term for the way we make our product is Fibreglass Reinforced Plastic or FRP for short, or more commonly called fibreglass. FRP doesn’t dent, corrode, rot, delaminate, support bacteria and has a high strength to weight ratio being several times higher than steel on a weight to weight basis. It demonstrates a very high resistance to U.V. and other environmental conditions is highly resistant to chemical attack and has an indefinite lifespan. The particular base resin used also features extremely good fire retardant and low smoke emission characteristics. Almost all other stair nosing and floor plate manufacturers adopt a layering or bonding method where an anti-slip coating is bonded to a rigid pre-formed base such as steel or pultruded material.
In Daylight
In Darkness
WORKPLACE SAFETY & SOLUTIONS
This method invariably sets up a weak point where the two dissimilar components, the top coating and the base material, meet. This weak point will be further strained by stress set up within the product through movement associated with normal use or thermal expansion and contraction. Such a bonding method also has a low tolerance to impact and typically the top coating will peel away from damaged areas. Copyright © 2012 Barrier Group Pty. Ltd.
The products you receive are constructed from a base mix of fire retardant polyester resins interspersed with immensely strong interwoven glass fibre. The colour pigmentation is floated right through the full thickness of the materials so that it is impossible to wear the colour off and become unsightly. The fused alumina anti-slip grain is then forced into the base mix under pressure while it is still wet, followed by a final resin layer laid over the top of it all. This entire composite mix is then cured at optimum temperatures until fully hard.
MAINTENANCE FRP Anti Slip can be easily maintained to preserve the smart appearance and effective non-slip qualities. Because of the extreme hardness and chemical resistance of FRP Anti Slip, cleaning can be effected with medium pressure steam or water, degreasers and detergents. Stubborn soils can be removed with a stiff deck broom. Strong solvents should be avoided as they may soften or discolour the FRP material. Do not use scrapers or wire brushes.
TECHNICAL SPECIFICATIONS Slip Resistance The coefficient of friction (COF) is a number which represents the friction between two surfaces. Friction is of course the resistance an object encounters in moving over another, so when we quote a COF figure for our ant-slip products we are quoting the measure of our products ability to provide safe traction and thereby prevent slips and falls.
No layering, no bonding, no weak spots, just one immensely strong composite whole. With these products the anti-slip material cannot be knocked out as happens with over-coating methods. No peel back or chipping can occur around localized damage points. Furthermore, the colour cannot be worked off, flexing and movement will have no effect on them. With the FRP material, there is a 100% guarantee that it cannot rust or corrode. You simply get the toughest, most durable and longest lasting nosing’s available anywhere in the world.
Different countries and indeed different agencies within a country adopt and rely on different testing apparatus to gain COF results. FRP Anti Slip has had test results produced from the three internationally most widely accepted slip meters: • The Brungraber Mark II • The English XL VIT • The British Pendulum Slip Tester FRP Anti Slip industrial safety products have been tested with the above apparatus and found to comply with and exceed requirements of the following Standards: • ASTM F1677 • ASTM F1679
INSTALLATION On-Site Cutting FRP Anti Slip is very easily shaped or cut to size should this be required. We recommend using a dry cut diamond blade operated in a hand held 100mm angle grinder. As dust and loose chips will be generated through the cutting process, eye protection and dust masks should be worn.
• NFPA 1901 • DIN 51130 • AS/NZS 4586
RESISTANCE TO FIRE Independent laboratory testing has confirmed that FRP Anti Slip products will exhibit the following flammability characteristics:
No edge sealing is required where the product has been cut. • Rated Class 2, when tested according to BS 476, Part 7 FRP Anti Slip is intended to be glue fixed to smooth surfaces using screedable glues as used for PVC vinyl flooring. Ensure that both the floor surface and the smooth underside of FRP Anti Slip are clean, dry and free of dust and loose material. Locate FRP Anti Slip in the correct location and mark on the floor around the perimeter of the FRP Anti Slip. Turn the FRP Anti Slip upside down and apply the sheet flooring adhesive according to the manufacturer’s directions. When ready, turn the FRP Anti Slip over and locate in the marked location, roll lightly to ensure a full bond and allow a full curing time.
WORKPLACE SAFETY & SOLUTIONS
• Rated self-extinguishing when tested in accordance to ASTM D 635 • Rated indices when tested according to AS 1530-Part 3, 1976
Ignitability Index
15
Spread of Flame Index
9
Heat Evolved Index
8
Smoke Developed Index
8
Copyright © 2012 Barrier Group Pty. Ltd.
49 SECTION
04
DOCK-SAFE-Q Dock-Safe-Q is a light weight rapid deployment temporary safety barrier system to prevent people tripping or falling from elevated loading docks. Dock-Safe-Q is comprised of two parts (ordered separately). The Dock-Safe receiver is a moulded rubber block that is mounted directly to the face of the loading dock. This receiver also acts as a heavy duty dock bumper. The Dock-Safe-Q panel then simply drops into sockets in the receiver. Panels can be quickly removed and replaced if required for vehicle access. Panels can be used without rubber receiver blocks. Simply core drill 50mm diameter holes into the floor to receive panel posts. The panels can then be quickly placed and removed as required.
Dock-Safe temporary edge protection.
Value features:
50 SECTION
04
Place and remove panels quickly without tools. One metre high lightweight panels in hi-vis orange. Removed panels stack flat. Moulded from super tough polyethylene. Receivers double as heavy duty dock bumpers. Prevents unauthorised entry through dock area.
Specifications: Description:
Rapid deployment loading dock barrier.
Material:
Panel – Blow moulded polyethylene. Receivers – Moulded rubber.
Finish:
Panel – Solid colour safety orange.
Height:
Floor to top of panel 1000mm.
Dock-Safe with independent receiver blocks.
Panel length: 2130mm. Weight:
Panel with 2 posts – 14kgs approx. (including posts). Receiver – 12kgs each.
Fixings:
Supplied with Dock-safe receiver.
PART No. DSQ2130 DSR1
Dock-Safe-Q panel with posts 900 x 2130mm
DESCRIPTION Dock-Safe receiver with fixings (order separately)
WORKPLACE SAFETY & SOLUTIONS
Installing panel with receiver.
For dimensions of receiver see page 27.
Copyright © 2012 Barrier Group Pty. Ltd.
MENNI RACKING END GUARDS Menni racking end guards are designed to minimise damage to racking and stored product as a result of impact by forklifts, vehicles and trolleys. Moulded interlocking modules, made from super tough Linear Low Density Polyethylene (LLDPE), are virtually indestructible and highly visible. Available in 2 standard lengths to suit single or double width racking. Alternatively, add any number of additional modules for other applications such as asset protection etc.
Value features: Comes complete with fixings. Mounted independently of racking. Super tough LLDPE construction. Accepts standard 50mm diameter FRP sign post. Low cost. Fraction of the cost of fabricated steel units. Impact absorbing qualities. U.V. stabilised. Won’t fade, chip, rot or rust. MRP1100 MRP2200
51
Specifications: Description:
Menni racking end guard.
Material:
Injection moulded Linear Low Density Polyethylene (LLDPE).
Finish:
Solid colour (Yellow standard).
SECTION
PART No.
DESCRIPTION
MRP1100
Menni single racking end guard – 1080mm long
MRP2200
Menni double racking end guard – 2160mm long
04
Dimensions:
Single – L1080 x W150 x H100mm. Double – L2160 x W150 x H100mm. No. of fixings: 4 or 8 x 12mm masonry anchors (supplied).
BULL-DOG BRACKETS – Pallet racking leg guards Pallet racking legs are often supporting many tonnes of product. Protecting these legs is of vital importance to avoid potential disasters caused as a result of impact by forklifts or trolleys. Bull-dog brackets are manufactured from heavy steel plate and bolt to the warehouse floor independent of the racking, therefore isolating any impact from the structural members of the racking system. When considered against the cost of potential damage, Bull-dog brackets represent a very low cost form of insurance.
Value features: Manufactured from 5mm thick steel plate. Four bolt fixing for maximum security. Powder coated high visibility safety yellow. Protects your investment and reduces the risk of collapse due to impact. Quick and simple to install without the need for down time. Comes complete with fixings. Mounted independently of racking to avoid impact transference.
PART No.
DESCRIPTION
BDB
Bull-dog bracket
WORKPLACE SAFETY & SOLUTIONS
Specifications: Description:
Pallet racking leg guards.
Material: Finish:
Laser cut from 5mm thick steel plate. Safety yellow powder coat.
Height:
400mm.
Weight:
4.6kgs approx.
Installation:
4 x 12mm masonry anchors (supplied).
Copyright © 2012 Barrier Group Pty. Ltd.
MODULAR WIRE SHELVING A strong heavy duty modular wire shelving system that is ideal for coolrooms, commercial kitchens, warehouses, storerooms, hospitals, garages and homes. Comprising tubular posts and height adjustable shelves in a range of sizes. All components are zinc plated and finished with a clear epoxy powder coat for maximum protection. Both posts and shelves are flat packed in cartons of 4 pieces. However, they are priced as single units and can be purchased individually. This is an extremely flexible and versatile system which can be dismantled and repositioned at any time while maintaining complete structural integrity.
Value features:
52
Heavy duty construction. Clear epoxy powder coat finish over zinc plating. Suitable for coolrooms and commercial kitchens. Easy to assemble and dismantle. Wide range of sizes available. Adjustable, levelling feet (optional castors). Holds up to 200kgs per shelf.
SECTION
04
Heavy duty / High quality. Optional locking or non-locking castors.
PLEASE NOTE HOLDS UP TO 200KG PER SHELF. Heavy duty construction and clear epoxy powder coat make our system the premium product in its class. Don’t be fooled by cheap imitations.
PART No.
DESCRIPTION
WS1472
Wire shelf 355 x 1830mm
WS1842
Wire shelf 460 x 1070mm
WS1860
Wire shelf 460 x 1525mm
WS2124
Wire shelf 530 x 610mm
WS2136
Wire shelf 530 x 915mm
WS2148
Wire shelf 530 x 1220mm
WS2160
Wire shelf 530 x 1525mm
WSP54
Support post 1370mm high
WSP63
Support post 1600mm high
WSP72
Support post 1830mm high
WSP84
Support post 2130mm high
WSLC
Locking castor wheel
WSC
Non-locking castor wheel
WSH11
‘S’ Hook joiner
WORKPLACE SAFETY & SOLUTIONS
Adjustable Shelves
Levelling Feet
Shelves are adjustable in increments of 25mm.
Simply screw post feet in or out to level shelves on uneven floors.
Wire Construction
‘S’ Hooks
Maximises light and visibility of stored items and aids air circulation.
Can be used in place of extra posts in some circumstances. Copyright © 2012 Barrier Group Pty. Ltd.
COLLAPSIBLE MESH STORAGE CAGE A strong versatile storage cage ideal for transport or warehousing. It collapses in seconds without the need for any tools. Drop down gate with self-locking latches provides access even when stacked. With a load capacity of 1200kgs they can be stacked up to 4 high in a warehouse environment or 2 high in transport situations.
Specifications Description:
Collapsible storage cage.
Material:
Steel construction with 6mm wire.
Finish:
Zinc plated.
Dimensions:
1200 x 1000 x 860mm.
Weight:
65kgs.
Drop down gate.
Stackable.
Load capacity: 1200kgs.
53 SECTION
04 PART No.
DESCRIPTION
CSC1
Collapsible mesh storage cage
WORKPLACE SAFETY & SOLUTIONS
Collapses easily.
Quick release locks.
Copyright © 2012 Barrier Group Pty. Ltd.
REFLECTIVE TAPES Be Safe – Be Seen! High visibility for use on vehicles or in work places. Adhesive backed just peel and stick. Red/White and Yellow/Black in class 2 reflective. Plain colours white or yellow are both class 1 premium grade reflective.
PART No.
DESCRIPTION
RT50RW
Reflective tape 50mm x 5.0 metre (class 2) – Red/White
RT50YB
Reflective tape 50mm x 5.0 metre (class 2) – Yellow/Black
RT50W
Reflective tape 50mm x 5.0 metre (class 1) – White
RT50Y
Reflective tape 50mm x 5.0 metre (class 1) – Yellow
RT50RW (Class 2).
RT50YB (Class 2).
RT50W (Class 1).
RT50Y (Class 1).
PC6R.
PC6Y.
PC6RW.
PLASTIC CHAIN A high strength plastic safety and barrier chain which can be used to cordon off work place and public access areas. Highly durable and in a range of colours it can be used for both indoor or outdoor applications. Sold per 25 metre roll.
54 SECTION
04
PART No.
DESCRIPTION
PC6R-R
Plastic safety chain – 6.0mm Red per 25 metre roll
PC6Y-R
Plastic safety chain – 6.0mm Yellow per 25 metre roll
PC6RW-R
Plastic safety chain – 6.0mm Red/White per 25 metre roll
PC6W-R
Plastic safety chain – 6.0mm White per 25 metre roll
PC6W.
Chain can be used in conjunction with Neata Hook Posts, Flex Bollards and T-top Bollards.
FLOOR MAT – Anti-fatigue mat Designed to provide an anti-slip and anti-fatigue surface. Has a wide range of domestic, industrial, commercial and agricultural applications. Manufactured from hard wearing black natural rubber. Measures 910 x 1520 x 13mm.
PART No.
DESCRIPTION
FM3660
Anti-fatigue floor mat 910 x 1520 x 13mm – Black
FM3660 – Anti-fatigue mat.
FLOOR MAT – Oil resistant mat Designed to be oil resistant to provide an anti-slip and anti-fatigue surface. Has a wide range of domestic, industrial, commercial and agricultural applications. Manufactured from hard wearing rubber. Measures 910 x 1520 x 10mm (this mat is coloured red to distinguish that it has oil resistant properties, compared against other normal mats in black).
PART No.
DESCRIPTION
FM3660R
Oil resistant floor mat 910 x 1520 x 10mm – Red
WORKPLACE SAFETY & SOLUTIONS
FM3660R – Oil resistant mat.
Copyright © 2012 Barrier Group Pty. Ltd.
SECTION
05
SPEED HUMPS
When purchasing speed humps, be sure you are meeting your liabilities. The Australian standard AS2890.1:2004 has been very clear about the design, use and intent of speed humps on private property. Our Slo-motion steel speed humps have been a market leader for over 12 years while our Slo-motion Compliance hump is totally unique to the Australian market and manufactured from environmentally friendly Low Density Polyethylene. Both of course have been designed by us to comply fully with AS2890.1:2004.
You may also be interested in pages: 44
CONVEX MIRRORS
66
WHEEL STOPS
70
LOK-UP
72
ROAD SPIKES
SLO-MOTION COMPLIANCE – Our Premium Product Introducing our ‘Slo-motion Compliance’ speed hump. Compliance is a modular speed control system consisting of independent modules each 250mm long with rounded end caps. Compliance is manufactured from a high tech ‘Linear Low Density Polyethylene’ (LLDPE) with solid colour. It will not fade, rot, rust or crack and has built-in prismatic reflectors for enhanced night visibility. Suitable for car parks, schools, shopping centres, factory complexes or anywhere it is desired to control the speed of vehicles.
Finally an Australian company… has designed and developed in Australia a modular composite speed hump to comply with Australian Standards AS2890.1:2004 for local conditions. Slo-motion Compliance is as tough as the Aussie Outback.
WARNING © Barrier Group Pty. Ltd. takes the protection of its intellectual property (IP) seriously and will not hesitate to pursue legal action against any individual, group or organization attempting to steal, copy or duplicate any of its proprietary designs OR anyone who imports, sells or distributes illegal copies or duplicates of its proprietary designs. IT’S AGAINST THE LAW – AVOID THE PAIN!
56 SECTION
05
PLEASE NOTE The Australian Standard which regulates the design and use of speed humps for use in off-street parking in Australia is ‘AS2890.1:2004 parking facilities’. AS2890.1 identifies four main criteria in the design of “type 2” speed humps: height, cross section, ramp angle and markings. Don’t be fooled! Until now very few “type 2” speed humps sold in Australia met these four criteria. Of the non-metal type, most if not all are manufactured overseas from cheap, very poor quality reclaimed materials of variable origin which quickly breakdown, fade or fail under Australian conditions.
100 to 150mm.
250
2H
250
25 to 75mm.
H
Yellow or White stripes
Height:
Cross Section:
Ramp Angle:
Markings:
Must be between 25 & 75mm.
Must be flat on top. Not round or peaked.
Must have a ramp angle 2:1.
Must have alternating parallel yellow or white stripes 250mm wide.
SPEED HUMPS
Copyright © 2012 Barrier Group Pty. Ltd.
Value features: Designed and developed in Australia to comply with AS2890.1:2004. Solid colour. U.V. stabilised, high tech composite plastic construction. Supplied with fixings ready for installation. Built-in prismatic reflectors for improved night visibility. Slip resistant texture moulded into surface. Built-in cable channel 27 x 30mm. Strengthened mounting points with large diameter load sharing washers. Low noise design suitable for residential areas. Excellent outdoor weathering characteristics Light weight with incredible strength, able to take vehicles, trucks and buses etc.
Textured slip resistant surface moulded in.
High tech composite plastics with solid colour.
Designed and developed in Australia for local conditions.
Built-in reflectors and large load sharing mounting points.
Specifications: Description:
Slo-motion Compliance speed control system.
Material:
Injection moulded Linear Low Density Polyethylene (LLDPE).
Finish:
Solid colour (Black or Yellow).
Length:
Body modules – 250mm. End modules – 180mm Radius.
Width:
360mm (In the driving direction).
Height:
60mm.
Ramp Angle: 2:1. Weight:
Body modules – 1.8kgs. End modules – 0.8kg.
57
No. of fixings: 2 per module (supplied).
SECTION
PART No. SMC250Y SMC250B SMC250E
05
DESCRIPTION Slo-motion compliance speed hump 250mm body module – Yellow Slo-motion compliance speed hump 250mm body module – Black Slo-motion compliance speed hump 180mm radius end module – Black (pair) Light weight construction with strength and durability engineered in.
360mm
Reflectors 2 per module
Simple installation with all fixings supplied.
MANUFACTURED FROM ENVIRONMENTALLY FRIENDLY LINEAR LOW DENSITY POLYETHYLENE (LLDPE)
105mm 150mm 105mm 60mm
180mm SPEED HUMPS
250mm
250mm
250mm
27 x 30mm 360mm Copyright © 2012 Barrier Group Pty. Ltd.
SLO-MOTION STANDARD DUTY STEEL SPEED HUMP Slo-motion is a modular steel speed control system consisting of truly independent super strong steel modules. The ends of each speed hump are finished off with a pair of end caps. These end caps are moulded from an extremely durable rubber, or alternatively, steel end caps are also available if preferred. Suitable for car parks, shopping centres or factory complexes.
Value features: Designed to comply with AS2890.1:2004. More than 4 times the load bearing contact area with the road surface than competitor’s products. Can be used with or without end caps. A choice of either steel or rubber end caps. Comes complete with all fixings. Truly independent modules for easy removal. Does not require a rubber underlay to prevent rattle. Concealed fixings remain accessible. Modules have a built in bridge design to accommodate hoses or cables.
SMEC
Optional rubber end caps.
Specifications: Top Skin:
3mm floor plate.
Length:
1 metre or 1/2 metre.
Width:
350mm.
Height:
52mm.
Weight:
16.5kgs (9.2kgs for 1/2 metre). SMEC – 5.2kgs/pair (rubber). SMSEC – 5kgs/pair (steel).
No. of fixings::
4 (supplied).
58
175mm
1000mm or 500mm OVERHEAD VIEW
SECTION
05
PART No.
DESCRIPTION
SM1000
Slo-motion standard duty steel speed hump – 1.0 metre
SM500
Slo-motion standard duty steel speed hump – 0.5 metre
SMEC
Rubber end caps – 1 pair
SMSEC
Steel end caps – 1 pair
SPIKES
Optional steel gravel spikes for fixing into loose surfaces – 300 x 12mm each
350mm
30mm outside dia. / 15mm inside dia.
SECTION
SIDE VIEW
Ramp Angle 1:2 52mm Cable or hose access 65 x 30mm
AWARENESS SIGN KIT – Speed humps A prepackaged sign kit for use with speed hump installations. The kit allows for an economical alternative to purchasing all the components separately. It comprises the necessary sign, brackets and post to complete the installation. Alternatively, all components are available individually.
PART No.
DESCRIPTION
BSHKIT
Complete speed hump sign kit
S1000-RA
Speed Hump sign – class 1 reflective 600 x 600mm
SP2800
Galvanised sign post – 2800 x 60mm
SPB1
Single sided sign bracket (requires 2)
CAP60
Galvanised post cap to suit 60mm sign post
SPEED HUMPS
BSHKIT – Single sided speed hump sign kit.
Copyright © 2012 Barrier Group Pty. Ltd.
SLO-MOTION HEAVY DUTY STEEL SPEED HUMP Slo-motion Heavy Duty is the modular steel speed control system for seriously heavy vehicle applications (including ‘B’-Doubles). Perfectly suited to transport depots, factories and terminals etc. Our super strong chassis construction with 6mm floor plate and 6 bolt fixing make our Slo-motion Heavy Duty virtually indestructible.
Value Features: Designed to comply with AS2890.1:2004. More than 4 times the load bearing contact area with the road surface than competitor’s products. Use with or without end caps. A choice of either steel or rubber end caps. Comes complete with all fixings. Truly independent modules for easy removal. Does not require a rubber underlay to prevent rattle. Concealed fixings remain accessible. Modules have a built in bridge design to accommodate hoses or cables.
Specifications: Top Skin:
6mm floor plate.
Length:
1 metre or 1/2 metre.
Width:
350mm.
Height:
55mm.
Weight:
24.5kgs (13kgs for 1/2 metre). SMEC – 5.2kgs/pair. SMSEC – 5kgs/pair.
No. of fixings:
6 (supplied).
59 SECTION
05
SMSEC
Optional Opptioonal ste ssteel ell end caps.
175mm
1000mm or 500mm OVERHEAD VIEW
PART No.
DESCRIPTION
SM1000HD
Slo-motion heavy duty steel speed hump – 1.0 metre
SM500HD
Slo-motion heavy duty steel speed hump – 0.5 metre
SMEC
Rubber end caps – 1 pair
SMSEC
Steel end caps – 1 pair
SPIKES
Optional steel gravel spikes for fixing into loose surfaces – 300 x 12mm each
SPEED HUMPS
350mm
30mm outside dia. / 15mm inside dia.
SECTION
SIDE VIEW
Ramp Angle 1:2 55mm Cable or hose access 65 x 30mm
Copyright © 2012 Barrier Group Pty. Ltd.
SPEED HUMP SELECTION CHART AUSTRALIAN STANDARDS FOR SPEED HUMPS-AS2890.1:2004
SM1000HD
SM1000
SMC250
SME50
The speed humps in this table have all been designed to comply fully with the requirements of “type 2” speed humps as set out in AS2890.1:2004 (see page 56 for design details)
Slo-Motion Heavy Steel
Slo-Motion Standard Steel
Slo-Motion Compliance
Economy Rubber 50mm
WHEN ORDERING SPEED HUMPS ALWAYS SPECIFY THE TYPE AND CONDITION OF THE ROAD SURFACE WHERE THEY ARE TO BE INSTALLED
Designed to comply with AS2890.1:2004 ‘type 2’ speed humps Performance rating Maximum recommended load per axle
Yes
Yes
Yes
Heavy
Extra Heavy
Medium
20 tonnes
10 tonnes
20 tonnes
5 tonnes
Suitable for constant heavy vehicle traffic (Incl. truck & bus)
Yes
No
Yes
No
Suitable for high volume car and some truck traffic
Yes
Yes
Yes
No
Suitable for low volume car traffic or short term use
Yes
Yes
Yes
Yes
Made from materials that are readily recyclable
Yes
Yes
Yes
No
Fabricated steel
Fabricated steel
Polyethylene
Recycled rubber
Good
Good
Excellent
Poor
24.5kgs
16.5kgs
7.2kgs
16kgs
Steel
Rubber or steel
Polyethylene
Recycled rubber
6
4
8
8
Yes
Yes
Yes
Yes
Concrete screw bolts available
Optional
Optional
Optional
Optional
Gravel spikes available (300mm)
Optional
Optional
Optional
Optional
Width of hump (direction of travel)
Material (body modules) Resistance to fading over 3 years Weight per metre (kgs) End caps (sold in pairs) Fixings per metre Fixings supplied ( M10 x 90mm coach bolts with Hilti plugs)
60
Yes Extra Heavy
350mm
350mm
360mm
340mm
Height of hump
55mm
52mm
60mm
50mm
No. of modules per metre
1 x 1m
1 x 1m
4 x 250mm
4 x 250mm
500mm modules available
Yes
Yes
N/A
N/A
Note: This table is intended as a guide only to assist in selection. It is the purchaser’s responsibility to determine the suitability for their intended use.
SECTION
05
FREQUENTLY ASKED QUESTIONS 1. Where can ‘type 2’ speed humps like these be used? Type 2 speed humps as described in AS2890.1:2004 are appropriate for use on private property or covered and multi-storey car parks, where it is desired to further check the speed of vehicles, mostly travelling at 30 km/h or less. 2. How far apart should speed humps be positioned? Road humps shall be spaced at no less than 10 metres for Type 2, along any one aisle or roadway. Maximum spacing where required to control speeds continuously along a roadway should be about 50 metres. Humps should always be located clear of intersections and curved road ways. 3. What about pedestrians and speed humps? Humps shall not impede pedestrian or wheelchair traffic on any accessible travel path provided for people with disabilities. An accessible path of travel needs to be a minimum of 1 metre wide. 4. I’ve seen some rubber speed humps that are round on top. Do these comply with the standards? No, AS2890.1:2004 clearly states that “type 2” speed humps should be flat on top with a ramp angle of 2:1 on both sides. See page 56 of this catalogue for a clearer explanation of the design requirements of AS2890.1:2004. 5. Is it true that steel speed humps rattle when vehicles cross them, and if they do, why is this the case? (1) They have been incorrectly installed or installed using fixings that are not suited to the road surface. OR (2) The other major reason metal speed humps come loose and develop rattles is poor design. There is a belief that placing a thick rubber underlay beneath a hump during installation will eliminate rattles. WRONG! Many years of experience has proven that humps requiring rubber underlay as part of their installation in fact act like a cake cutter, destroying the rubber underlay which then leaves the hump loose. The Barrier brand Slo-Motion steel speed humps have been designed with large flat pads. (up to 4 times the footprint of competitors products). This large footprint eliminates the need for a rubber underlay and reduces the risk of humps working loose, thereby eliminating noise.
SPEED HUMPS
Copyright © 2012 Barrier Group Pty. Ltd.
IP01
SPEED HUMPS Installation Procedure (all models): 1. Using a chalk line, set out and position speed humps in their desired location. With a 10mm drill bit and impact drill, pilot drill the mounting holes for each module. (PHOTOS 1 & 2). 2. Move the modules to one side and drill piloted holes with a 14mm drill bit 100mm deep. Clean dust from holes, insert the plastic Hilti plugs supplied and hammer flush with road surface. A little grease or oil on the screw threads will make them easier to tighten. (PHOTOS 3 & 4).
1.
2.
3. Reposition the speed hump modules over holes and insert fixings making sure to use the washers supplied. (PHOTO 5). 4. Using an appropriate size socket wrench or impact driver tighten fixings. (PHOTO 6).
5. Clean the site to complete your installation. (PHOTO 7). 6. Go over completed installation and tighten all connections.
3.
4.
61 SECTION
Notes:
05
• To achieve long, straight lines use a string or chalk line. • On completion, check all fixings are tight. • Always use personal protective equipment when using power tools. • Always position humps at least 100mm clear of expansion gaps in the road surface. (PHOTO 7). 5.
6.
7.
8. Standard fixings supplied
WHAT YOU WILL NEED • • • • • •
Tape measure and string line. Impact drill and masonry bits. Socket wrench or impact driver. Can of lubricant. Hammer or mallet. Personal protective equipment.
SPEED HUMPS
Copyright © 2012 Barrier Group Pty. Ltd.
RE
CY
CL
ED
ECONOMY RUBBER SPEED HUMP This speed hump is an economical alternative to more expensive models. It is ideally suited to low traffic environments such as unit and town house developments or for short term installations. They are manufactured from a mixture of natural and recycled rubber. When laid in an alternating pattern they conform to AS2890.1:2004. Can also be used as a liquid bunding if installed with a sealant. e.g. silastic.
Value features: Designed to comply with AS2890.1:2004. Can be used with or without end caps. Comes complete with all fixings. Concealed fixings remain accessible. Built in bridge design to accommodate a cable or hose (when used without end caps).
LENGTH 170mm
250mm
250mm
FOR HIGH TRAFFIC AREAS USE OUR “COMPLIANCE” SYSTEM. SEE PAGES 56-57.
WIDTH 340mm
Specifications Description:
Economy Rubber Speed Hump.
Material:
Recycled and Natural rubber.
Length:
Body 250mm (i.e. 4 modules per metre). End 170mm. 340mm.
Width:
62
Height:
50mm.
Weight:
Body 4kgs / End 2kgs.
No. of fixings:
2 per body / 4 per pair of ends.
END VIEW 340mm 50mm 15 x 25mm cable access
PART No.
DESCRIPTION
SME50B
Economy rubber speed hump 50mm module – Black
SME50Y
Economy rubber speed hump 50mm module – Yellow
SMEC
Rubber end caps (1 pair)
RE
SECTION
05
TRAFFIC CALMING RUBBER SPEED HUMP
270mm
LENGTH 500mm
CY
CL
ED
270mm
Traffic Calming speed humps are designed for situations where traffic speed needs to be controlled but a traditional speed hump is not suitable. Smoother approach and departure angles mean a wider range of vehicles can pass over them. Solid rubber construction means these traffic calmers are capable of handling heavy traffic. Safety yellow anti-slip insert panels increase visibility and improve pedestrian safety.
WIDTH 900mm
END VIEW
Value features: Full load bearing contact area with road surface. Convenient modular system can be configured to any length. All modules supplied with fixings. Concealed fixings remain accessible. Highly shock absorbent rubber is both quiet and smooth in operation. Rubber construction conforms to uneven surfaces. Middle sections fitted with high visibility non-slip panels.
PLEASE NOTE End caps for the traffic calming rubber speed humps are sold as a male & female pair only.
SPEED HUMPS
50mm 270mm
500mm
270mm
900mm
Specifications Description:
Traffic calming system using interlocking body and end modules.
Material:
Solid natural and recycled rubber.
Finish:
Moulded black rubber with yellow panels.
Length:
Body 500mm / End 270mm.
Width
900mm (both Body and End modules).
Height:
50mm.
Weight:
Body 20kgs each / End 15.7kgs pair.
No. of fixings:
5 per body, 6 per pair of ends (supplied).
PART No.
DESCRIPTION
SMTC900
Traffic calming rubber speed hump middle module – 900 x 500mm
SMTC900E
Traffic calming rubber speed hump end modules (pair) – 900 x 270mm
Copyright © 2012 Barrier Group Pty. Ltd.
RE
CY
CL
ED
RUBBER SPEED CUSHION Rubber Speed Cushions are made from recycled rubber. Rubber is lighter and easier to work with than asphalt and concrete, significantly reducing installation time. Rubber pieces can be pulled up and moved without being destroyed. This is convenient for municipalities who want to institute temporary measures to test an area or permanently control traffic speed. Unlike concrete and asphalt which necessitate frequent and high cost replacement, rubber products are long lasting and cost-efficient. In addition to long term benefits, rubber products offer a quicker installation method.
Value features: Embedded reflective material increases visibility and safety, day or night. All-weather easy maintenance: will not warp, chip, crack, crumble or corrode. Extremely durable: tough enough for heavy traffic. Flexible: conforms to road curvature and any asphalt or concrete surface. Resistant to extreme temperature variations, U.V., oils, moisture and damage. Available as a 4 or 6 panel kit.
Specifications: Description:
Modular rubber speed cushion system.
Material:
Recycled rubber.
Finish:
Black with embedded reflective panels.
Length:
Panels 1000mm. Assembled 2000 or 3000mm.
Width:
Panels 900mm. Assembled 1800mm.
Height:
65mm.
Weight:
Middle module 57kgs. Corner module 40kgs. Assembled approx. 200 or 300kgs.
Fixings:
Supplied.
PART No. RSC-R RSC-M RSC-L RSC-KIT4 RSC-KIT6
63 SECTION
05
DESCRIPTION Rubber speed cushion – right end Rubber speed cushion – middle Rubber speed cushion – left end Rubber speed cushion – 4 panel kit Rubber speed cushion – 6 panel kit 6 panel kit shown (RSC-KIT6).
WIDTH 1800mm 65mm 900mm
900mm LENGTH 2000 or 3000mm
1000mm
1000mm
1000mm
(centre modules optional)
SPEED HUMPS
Copyright © 2012 Barrier Group Pty. Ltd.
RE
CY
CL
ED
RUMBLE STRIP A durable and versatile low profile rubber rumble strip for use as a speed moderator or lane divider on roadways. Ideal in residential complexes to slow the flow of vehicles. Alternatively, it can be used as a wall mounted bump protector. Manufactured from recycled rubber, 500mm long x 100mm wide x 15mm thick. Can be installed with appropriate masonry fixings or glued using a suitable adhesive.
PART No. RS500-B
DESCRIPTION Rumble strip 500 x 100 x 15mm – Black
RS500-Y
Rumble strip 500 x 100 x 15mm – Yellow RE
CY
CL
ED
PARKING SEPARATOR A versatile rubber separator suitable for slowing down the speed of vehicles or delineating parking or no-go areas. Alternatively it can be wall mounted for use as a docking or car park buffer.
64
Moulded from recycled rubber with a high visibility yellow finish with three reflective panels on each side. Can be mounted into concrete or asphalt with the fixings supplied. 1000 x 150 x 50mm. Weight 6.6kgs.
SECTION
05
PART No. PS1000-Y
DESCRIPTION Parking separator 1000 x 150 x 50mm – Yellow
CASE STUDY A high volume concrete batching plant in Victoria had a competitor’s steel speed humps in place that had failed miserably after a relatively short time (see inset photo). They had to be capable of handling constant, very heavy concrete tankers and trucks at a very demanding site. We were contacted and asked if we could provide a solution. When we suggested our injection moulded polyethylene Slo-motion Compliance hump the client said ‘No Way!’. But when we assured him that they were easily up to the job. This photo and the inset close up were taken 1 year after the installation. The Compliance Speed Humps have been subjected to the harshest possible treatment on a daily basis without any visible signs of distress, cracks, fading or movement. And for way less than the cost of the original steel humps we replaced. The customer is very, very happy with the outcome!
Slo-motion Compliance – as tough as the Aussie outback! SPEED HUMPS
Compliance after 1 year.
Failed competitor steel.
Copyright © 2012 Barrier Group Pty. Ltd.
SECTION
06
VEHICLE & PARKING
Vehicle & Parking contains a wide range of products used for traffic management for both on and off road use, including wheel stops, cable protectors, car parking space protectors and height bars for undercover parking facilities. This section also boasts a unique range of security products like our inhouse designed Scorpion wheel clamp and Blade Runner one-way road spikes. Many of the items in this section have been designed and developed by us in response to specific problems encountered by our customers.
You may also be interested in pages: 02
BOLLARDS
28
COLUMN PROTECTORS
44
CONVEX MIRRORS
55
SPEED HUMPS
COMPLIANCE WHEEL STOP
At last, a Green Alternative to rubber, concrete and steel wheel stops! Introducing our Compliance one-piece wheel stop.
It will not fade, rot, rust or crack and it comes complete with fixings and blanking plugs.
Designed to comply with AS2890.1:2004 and manufactured from high-tech Linear Low Density Polyethylene (LLDPE) with sustainability in mind.
Also, weighing only 4.5kgs each they are a dream to install.
The Compliance one-piece wheel stop is packed with features never seen before in a wheel stop, anywhere in the world.
Compliance is available in 3 standard U.V. stabilised colours. Safety Yellow for increased visibility and pedestrian safety, Blue for highlighting disabled parking spaces and Concrete Grey.
66 SECTION
06
THREE STANDARD, U.V. STABILISED COLOURS TO CHOOSE FROM
Blue model highlights disabled parking spaces.
DISABLED BLUE
VEHICLE & PARKING
Four blanking caps (included) provide a flush finish while concealing fixings.
Optional hi-vis reflector caps available.
SAFETY YELLOW
CONCRETE GREY Copyright © 2012 Barrier Group Pty. Ltd.
Value features:
Specifications:
Designed and manufactured to AS2890.1:2004. Manufactured from environmentally friendly LLDPE. Solid colour and U.V. stabilised. Extremely tough structure with retained flexibility. Lightweight, only 4.5kgs for one person installation. Much longer life than rubber or concrete alternatives. Four high-strength fixing points with blanking caps. Available in three colours – Yellow, Blue and Grey. Three standard fixing systems available. Moulded-in sign recess for personal identification. Absolutely unique, world-first design. Optional reflector plugs available. Comes complete with fixings and blanking plugs.
PART No. CWS1700Y
DESCRIPTION One piece Compliance wheel stop – Safety Yellow for improved pedestrian safety (fixings supplied).
CWS1700B
One piece Compliance wheel stop – Disabled Blue for disabled parking spaces (fixings supplied).
CWS1700G
One piece Compliance wheel stop – Concrete Grey (fixings supplied).
BMR
Optional reflector plugs (each)
Description:
Compliance one-piece wheel stop.
Material:
Injection moulded Linear Low Density Polyethylene (LLDPE).
Finish:
Solid colour, in Yellow, Blue or Grey.
Length:
1700mm to AS2890.1:2004.
Width:
160mm at the base.
Height:
100mm to AS2890.1:2004.
Weight:
Approx. 4.5kgs each.
No. of fixings:
Four (selected from the table below).
FIXINGS KIT17
KIT18
KIT19
DESCRIPTION Use for fixing into good quality asphalt or bitumen. Comprises four each of M10 x 100mm coach bolt, 44mm heavy washers and high performance masonry anchors. Use in conventional reinforced concrete. Drill depth 85mm. Comprises four each of M10 x 75mm concrete screw anchors and 44mm heavy washers. Use for shallow drilling into concrete. Drill depth 43mm. Comprises four each of M10 x 40mm drop-in anchors, 44mm heavy washers and M10 x 25mm set screws.
Combining value, durability and environmental sustainability with clean and safe handling! Fixing points spaced more closely for maximum impact resistance
67 SECTION
160mm
100mm DESIGNED TO COMPLY WITH AUSTRALIAN STANDARDS AS2890.1:2004 1700mm
By comparison, rubber wheel stops typically weigh around 16kgs and concrete up to 100kgs.
VEHICLE & PARKING
Choose from three different fixing systems.
Deeply recessed mounting points provide maximum hold-down.
Internal structure combines incredible strength and flexibility.
Copyright © 2012 Barrier Group Pty. Ltd.
06
RE
CY
CL
ED
RUBBER WHEEL STOP Go to our NEW Compliance Wheel Stop on page 66.
An economical one piece rubber wheel stop with hi-vis yellow panels. Manufactured from recycled materials with dimensions that comply to AS2890.1:2004. Suited to use in factories, warehouses and car parks etc. Comes complete with fixings.
Value features: Complies with AS2890.1:2004. Economical and simple to install. Solid moulded construction. Recycled materials won’t chip or corrode. Comes complete with fixings.
Specifications: Description:
Recycled rubber wheel stop.
Material:
Recycled rubber.
Finish:
Solid black rubber with yellow panels.
Length:
1650mm.
Width:
155mm.
Weight:
14kgs.
Fixings:
3 x 150mm masonry anchors. (Gravel spikes optional).
LENGTH
1650mm (3 bolt) WIDTH
155mm OVERHEAD VIEW
95mm
PART No.
DESCRIPTION
RWS1650
One piece rubber wheel stop – Black (fixings supplied)
SPIKES
Optional steel gravel spikes for fixing into loose surfaces – 300 x 12mm each
FRONT VIEW
RWS1650 RUBBER WHEEL STOP
CASE STUDY – Concrete Wheel Stops 68 SECTION
06
As most concrete wheel stops are around 150mm in height they do not comply with AS2890.1:2004. The standard specifies a maximum height of 100mm. This allows a clearance for most modern cars without causing them damage.
Shattered concrete wheel stops often leave 150mm steel fixing spikes dangerously exposed to pedestrians or vehicles. Car park builders and operators need to be aware of their responsibilities and liability in the event of someone falling on one.
Concrete wheel stops are very heavy often weighing 100kgs or more and requiring at least two men or mechanical lifting to install. They are inflexible and brittle and can be easily broken. They are particularly vulnerable at the fixing points.
OUR SOLUTION: Install Compliance one piece wheel stops (see page 66 for full details) The Compliance wheel stop is unique on the Australian market. It has been designed and developed to comply with AS2890.1:2004 from ultra-tough Linear Low Density Polyethylene (LLDPE). It won’t crack, crumble or fade. And at only 4.5kgs it’s by far the lightest wheel stop to handle on the market. Available in hi-vis safety yellow, concrete grey and blue for disabled parking spaces.
VEHICLE & PARKING
Copyright © 2012 Barrier Group Pty. Ltd.
IP19
PLACEMENT OF WHEEL STOPS ACCORDING TO AS2890.1:2004
900mm
620mm Front into a low kerb.
Rear into a low kerb.
820mm
1100mm
Front into a high kerb or wall.
69
Rear into a high kerb or wall.
Wheel stops may be provided where it is considered necessary to limit the travel of a vehicle into a parking space. Typical uses of wheel stops include:
1. Wheel stop distances shown are for 100mm high wheel stops and measured from the front of the parking space to the point of contact with the vehicle tyre. 2. If wheel stops are provided to restrain vehicle contact with a kerb higher than 150mm or a wall, a further 200mm shall be added to the wheel stop distance.
• Controlling the kerb overhang where inconvenient or hazardous to pedestrians. • Inhibiting contact with an end barrier or high kerb. • Inhibiting encroachment into an opposing parking space. Wheel stops should be avoided in any situations where they may be in the path of pedestrians moving to or from parked vehicles, or crossing a car park for any other purpose.
3. The maximum height of wheel stops under AS2890.1:2004 is 100mm. Most concrete wheel stops do not comply with the standard as they exceed the maximum height.
Wheel stops shall be between 90 and 100mm in height, and 1650 + 50mm in width.
WIDTH 1650mm +/- 50mm
HEIGHT Between
90mm &100mm Minimum and maximum wheel stop dimensions to comply with AS2890.1:2004.
VEHICLE & PARKING
Copyright © 2012 Barrier Group Pty. Ltd.
SECTION
06
LOK-UP (No Parking or No Entry) Lok-up is a collapsible steel parking and vehicle access barrier that locks in both the up and down positions. Steel construction and large footprint ensure maximum strength and durability. The minimum closed height of 35mm opens up to a working height of 750mm. A large reflective sign face and safety yellow powder coated finish provide maximum visibility day or night.
Value features: Available in 2 different models. Zinc plate and safety yellow powder coat. It stands tall when locked up – 750mm tall. It lays low when locked down – 35mm low. Comes complete with padlock and fixings. Large footprint for mounting into concrete or asphalt. Reflective sign face for night visibility. Locks in both the up and down positions.
195mm
Specifications Description:
Lock up / Lock down parking and access barrier.
Material:
4mm Mild Steel.
Finish:
Zinc plated & Powder coated.
Height:
Down 35mm / Up 750mm.
Weight:
Operating 6kgs approx / Shipping 15.4kgs.
Fixing:
Masonry anchors (supplied).
Locking:
40mm brass padlock (supplied).
PART No.
DESCRIPTION
LU-NP
Lok-up parking space protector – NO PARKING sign
LU-NE
Lok-up parking space protector – NO ENTRY sign
REFLECTIVE SIGN FACE
750mm LU-NE
295mm LU-NP
35mm 755mm
CABLE PROTECTORS – Pedestrian
70 SECTION
06
A tough one-piece moulded polyethylene cable protector designed to protect cables from damage and pedestrians from tripping hazards. Simply fitted by positioning the modules over existing cables or hoses. The interlocking modules are produced in a hi-vis safety yellow with a slip resistant surface. Recommended for short term or temporary pedestrian traffic. Ideal for construction and renovation works, or in office environments.
Value features: Simple drop over design. High visibility safety yellow finish. Handy 1010mm long interlocking modules. Low profile design.
Specifications: Description:
Drop over cable protector.
Material:
Moulded polyethylene.
Length:
1010mm.
Width:
135mm.
Height:
20mm.
Channel size: Single channel at 40 x 12mm. Weight:
1.3kgs/metre.
Installation:
Interlocking drop over modules. No tools required.
PART No.
DESCRIPTION
CP1BODY
Drop-over cable protector – 1 channel
VEHICLE & PARKING
Copyright © 2012 Barrier Group Pty. Ltd.
RE
CY
CL
ED
CABLE PROTECTORS – 2 Channel A durable moulded rubber cable protector designed for the temporary protection of assets from damage and pedestrians from tripping hazards. The bodies of these rugged cable protectors are manufactured from a combination of new and recycled rubber, while the hinged lids are tough, flexible rubber/plastic composite in hi-vis safety yellow. Recommended for short term, light duty vehicle and pedestrian traffic. Not recommended for forklift or truck traffic.
Value features: Robust construction. Hinged lid for ease of use. Provides safe passage to pedestrians. Interlocking 1 metre modules. Protects valuable cables and hoses. PART No.
DESCRIPTION
CP2BODY
Cable protector – 2 channel
Specifications: Description:
Hinged lid cable protector.
Material:
Rubber body with rubber/plastic lid.
Dimensions:
1 metre long x 250mm wide x 50mm high.
Channel size: 2 channels at 30 x 30mm. Weight:
7.25kgs/metre.
Installation:
Interlocking modules. No tools required. RE
CY
CL
ED
CABLE PROTECTORS – 3 & 5 Channel Moulded rubber cable protectors designed for the temporary protection of both assets from damage and pedestrians from tripping hazards. Available in either 3 or 5 channel designs. The bodies of these rugged cable protectors are manufactured from a combination of new and recycled rubber, while the hinged lids are tough flexible rubber/plastic composite in hi-vis safety yellow. Recommended for short term, light duty vehicle and pedestrian traffic. Not recommended for forklift or truck traffic.
Value features: Available in 3 or 5 channel. Robust construction. Hinged lids for ease of use. Provides safe passage to pedestrians. Protects valuable cables and hoses. Chunky interlocking connectors. Flexible modular design.
71 1 metre body modules in 3 or 5 channel.
65
Specifications: Description:
Hinged lid cable protectors.
Material:
Rubber body with rubber/plastic lids.
Dimensions:
900mm long x 590mm wide x 75mm high.
Channel size: 3 channels at W65mm x D50mm. 5 channels at W35mm x D50mm. Weight: 3 Channel 25.5kgs/mtr. 5 Channel 23kgs/mtr. Installation:
55
SECTION
06
65
50mm
75mm 590mm
CP3BODY THREE CHANNEL CABLE PROTECTOR BODY MODULE
Interlocking connectors. No tools required.
35 35 35 35 35
50mm
75mm PART No.
DESCRIPTION
CP3BODY
Cable protector – 3 channel
590mm
CP5BODY
Cable protector – 5 channel
CP5BODY FIVE CHANNEL CABLE PROTECTOR BODY MODULE
VEHICLE & PARKING
Copyright © 2012 Barrier Group Pty. Ltd.
ROAD SPIKES – One way access spikes The Blade Runner one way access spikes BRS1000 and BRS500 consist of either a 1000mm or 500mm heavy duty steel module. Steel end caps are available. Each module has independently retracting teeth. When a vehicle approaches from the correct direction the teeth simply retract, allowing the vehicle to pass freely. When approached from an unauthorised direction, the teeth lock up denying access and risking almost certain tyre damage. Key features of the Blade Runner one way access spikes include a highly visible lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance. The Blade Runner has been designed to provide a soft approach for vehicles due to its low ramp angle and reduced height. These same features also eliminate much of the noise commonly associated with older style products. Up to 8 fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.
Value features: Extremely strong construction, 6mm top plate. High visibility lime green finish. Deters access from unauthorised direction. All teeth operate independently of each other. Low profile design ensures legal vehicle clearance. Soft approach due to low ramp angle. Comes complete with all fixings. Available in 1000 and 500mm lengths.
175mm
LENGTH 1000mm
WIDTH 380mm
50mm
Specifications:
72 SECTION
06
Description:
One way access spikes.
Finish:
Lime green powder coat.
Top skin:
6mm floor plate.
Length:
1000mm or 500mm.
Width:
380mm.
Height:
Teeth up 95mm. Teeth retracted 50mm.
Weight (approx.):
13kgs per ½ metre. 26kgs per metre / Ends 5kgs per pair.
Fixings:
8 per metre (supplied). 4 per ½ metre (supplied).
95mm
BRS1000 BLADE RUNNER ROAD SPIKES
BLADE RUNNER – Awareness sign kit The Blade Runner awareness sign kit is designed to give advance warning of the presence of one way road spikes. Each kit comprises one galvanised sign post 2.8 metres long, one warning sign, one no-entry sign, four sign post brackets and one post cap.
PLEASE NOTE PART No. BRS1000 BRS500 BRSE BRSKIT
DESCRIPTION Blade runner one way access spikes body module – 1000mm Blade runner one way access spikes body module – 500mm Blade runner end caps (pair) Blade runner warning sign kit
VEHICLE & PARKING
Always check with your local authority or controlling body to ensure one way access spikes are allowable in your situation (this is the end user’s responsibility). Blade Runner one way access spikes MUST always be installed with an awareness sign kit (P/N BRSKIT). One way access spikes should always be placed clear of intersections and curved roadways. Failure to heed these warnings will void all warranties.
Copyright © 2012 Barrier Group Pty. Ltd.
IP20
SCORPION WHEEL CLAMP The Scorpion Wheel Clamp is a unique heavy duty wheel clamp capable of fitting a wide range of wheels from large 4WD to small sedans. It is perfect for protecting vehicles, trailers, caravans etc. from theft. Steel jaws are clamped around the wheel using high tensile steel chain and our unique tensioning system. The Scorpion can be fitted to any wheel on the vehicle, fits steel or mag wheels and does not require the removal of wheel trims.
5.
Unlike most wheel clamps which attach awkwardly around both sides of the wheel, the Scorpion is fitted from the outside only. This makes it quick to fit and easy on the back. It weighs 12.5kgs making it easy to carry. All parts pack neatly inside the wheel clamp for easy storage or transport. Already in use by some of Australia’s most senior enforcement authorities and regularly featured in the media after police crack downs on dangerous drivers, the Scorpion is the perfect way to immobilise the widest range of vehicles.
Value features:
1.
6.
2.
7.
Fitted from side of wheel. No need to remove wheel trims. Fits a wide range of wheels. Can be fitted to any wheel, front or rear. Robust construction to resist vandalism. Zinc plated to avoid corrosion. Reflective sign face for night visibility. All parts stored inside the unit when not in use. Very compact for storage and transport.
Specifications: Description: Material:
Scorpion Wheel Clamp. Steel case and jaws.
Finish:
Zinc plated with reflective sign face.
Height:
Up 750mm / Down 50mm.
Weight:
Operating 4kgs / Shipping 12.5kgs.
Locking:
Padlock (order separately).
73 SECTION
06
3.
Over 1000 units in service with law enforcement agencies across Australia. PART No.
DESCRIPTION
SCOR1
Scorpion Wheel Clamp
VEHICLE & PARKING
4.
8. Copyright © 2012 Barrier Group Pty. Ltd.
BIKE RAILS / HAND RAILS These versatile Bike Rails have a wide range of applications including handrails, bike storage, pedestrian chicanes at crossing points and impact protection barriers to name a few. Manufactured from 3mm wall steel pipe, 48mm in diameter and hot dip galvanised as standard. Available in either surface mount or below ground models in square or round styles. Powder coating is available by choice. All models stand 800mm high. The below ground models can be set deeper into their concrete footings to achieve a lower profile if required. Ideal for installations at schools, shopping centres, walkways or warehouses.
One piece design All Bike Rail models are manufactured from a single piece of steel tube. Base plates or concrete starter bars are welded and then the entire bike rail is hot dip galvanised as a single unit.
Value features:
Customised hand rail installed at a crossing point.
Suitable for a wide range of uses. Heavy 3mm thick wall tube. Hot dip galvanised finish or powder coated. Powder coating or reflective options available. Surface mount and below ground models. Two styles to choose from. Surface mount supplied with fixings. No assembly – ready for installation.
SURFACE MOUNT MODEL (Front view) 850mm
400mm
48mm
48mm 800mm
Specifications:
74 SECTION
Description:
One piece steel bike rail.
Material:
Steel pipe 48mm diameter with 3mm wall.
Finish:
Safety yellow powder coat and galvanised or galvanised only.
Height:
Above ground 800mm. Below ground 300mm.
Width:
BR1 models 850mm. BR2 models 400mm.
Weight:
BR1 models approx. 9.2kgs. BR2 models approx. 8.5kgs.
Installation:
6mm thick surface flange 150mm in diameter with 6 of 10 x 50mm masonry anchors for surface mount model. Below ground model has welded concrete starter bars.
Fixings:
Supplied with surface mount models.
06
800mm
3mm WALL
3mm WALL 150mm
150mm
BR1G-SM - BIKE RAIL 850W x 800H
BR2G-SM - BIKE RAIL 400W x 800H
BELOW GROUND MODEL (Front view) 850mm
400mm
48mm PART No.
DESCRIPTION
BR1G-SM
Bike rail 850 x 800mm surface mount – Galvanised
BR1P-SM
Bike rail 850 x 800mm surface mount – Powder coated
BR1G-BG
Bike rail 850 x 800mm below ground – Galvanised
BR1P-BG
Bike rail 850 x 800mm below ground – Powder coated
BR2G-SM
Bike rail 400 x 800mm surface mount – Galvanised
BR2P-SM
Bike rail 400 x 800mm surface mount – Powder coated
BR2G-BG
Bike rail 400 x 800mm below ground – Galvanised
BR2P-BG
Bike rail 400 x 800mm below ground – Powder coated
VEHICLE & PARKING
48mm 800mm
800mm
3mm WALL
3mm WALL ANCHORING BARS
BR1G-BG - BIKE RAIL 850W x 800H
300mm
ANCHORING BARS
300mm
BR2G-BG - BIKE RAIL 400W x 800H Copyright © 2012 Barrier Group Pty. Ltd.
HEIGHT BARS Eliminate damage to vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars. Our Height Bars are available in five standard lengths: 2, 3, 4, 5 or 6 metres and come with suspension chain and hanger assemblies. Powder coated safety yellow with reflective diagonal stripes, they carry the text “LOW CLEARANCE” with the specified height in black letters on a white background. Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas. Freestanding surface mount or below ground posts are available for installation where there is no existing supporting structure.
Value features: Available in five convenient lengths. Comes complete with hanger assemblies and chain. Powder coated high visibility safety yellow. Displays the required clearance (please specify). Manufactured from durable galvanised steel tube. Optional Offset hangers available in 2 lengths. Can be post mounted for freestanding installations.
Height bar with optional Stand off brackets.
Specifications
PART No.
DESCRIPTION
Description:
Suspended height bar with hanger assemblies and chains.
HB2
Height Bar with text and hangers – 2.0m long
Material:
100 x 50mm galvanised tube with 6mm galvanised chain.
HB3
Height Bar with text and hangers – 3.0m long
HB4
Height Bar with text and hangers – 4.0m long
Length:
2, 3, 4, 5 or 6 metres.
HB5
Height Bar with text and hangers – 5.0m long
Chain:
6mm galvanised chain 600mm long (2 off). Height Bar – Safety yellow powder coated over galvanised steel. Masonry anchors to building.
HB6
Height Bar with text and hangers – 6.0m long
Finish:
HBH
Additional Hangers with chain assembly
Installation:
HBS40
Height bar standoff bracket (each) – 400mm
HBS60
Height bar standoff bracket (each) – 600mm
HBPSM
Surface mount post 90 x 90 x 4mm – 3.2 metres high
Ship. Weight: 2 metre – 11kgs approx. 4 metre – 19kgs approx. 6 metre – 28kgs approx.
HBPBG
In-ground post 90 x 90 x 4mm – 4.0 metres high (Specify length of post required if custom)
3 metre – 15kgs approx. 5 metre – 23kgs approx.
Note: Please specify required clearance when ordering height bar. This will be the distance from the bottom of the height bar to the road surface.
75 SECTION
06 400 or 600mm
Please specify clearance when ordering (4 m)
(3.2 m)
90 x 90 x 4mm SHS
P/No. HB2 (2 m) P/No. HB3 (3 m) P/No. HB4 (4 m) P/No. HB5 (5 m) P/No. HB6 (6 m) FREESTANDING INSTALLATION showing HBPSM and HBPBG in use with Height bar stand off brackets and a Height Bar NOTE: Mass concrete footing (25MPa) engineered to requirements.
VEHICLE & PARKING
1100800 mm mm
450mm dia Copyright © 2012 Barrier Group Pty. Ltd.
T-TOP BOLLARDS T-Top bollards have a wide 6kgs base for increased stability even in high speed traffic or windy locations. The moulded polyethylene bollard is easily seen due to its fluorescent orange colour and standard reflective bands.
Value features: Two piece construction for ease of handling. Reflective bands for low light visibility. 6kgs base for stability. Tough moulded polyethylene construction. Widely accepted design complies to relevant standards. Additional bases available for more stability.
PART No.
DESCRIPTION
BTC1150
T-Top bollard and base – 1150mm
BTC1150B
Replacement rubber base only
BTC1150T
Replacement t-top bollard only
REFLECTIVE CONES These Reflective cones are ideal for roadworks, civil engineering, schools and carparks etc. The 450 and 700mm models are a 1-piece construction which means they are very durable. The 1 metre tall model has increased stability due to its 7kgs base and large footprint.
Value features: Standard with reflective collars. Available in 3 standard sizes. Suitable for indoor or outdoor uses. U.V. stabilised to minimise fading.
76
PART No.
DESCRIPTION
BTC450R BTC700R BTC1000R RCB2
Reflective traffic cone 450mm – Fluoro Orange Reflective traffic cone 700mm – Fluoro Orange Reflective traffic cone 1000mm – Fluoro Orange Retractable cone bar – 1.2 to 2.0 metres
RCB2 – Retractable cone bar with reflective bands. Extends from 1.2 to 2 metres. Use with any standard traffic cones. (For more details see page 77).
SECTION
06
COLLAPSIBLE CONES – Plastic base Ideal for emergency or maintenance work, these Collapsible cones fold down to less than 40mm high. Durable construction with internal light which can be switched between constant or flash modes. Long life battery included. At night the light causes the entire cone to glow. Both size cones include reflective collars.
Value features: Compact design for storage. In built light can be set to flash or constant. Easy to use and store in the boot of a car. Available in two standard sizes.
PART No.
DESCRIPTION
BTC450C
Collapsible cone (plastic base) – 450mm high
BTC720C
Collapsible cone (plastic base) – 720mm high
VEHICLE & PARKING
Step 1.
Step 2.
Step 3.
Copyright © 2012 Barrier Group Pty. Ltd.
COLLAPSIBLE CONES – Rubber base A very high quality, durable collapsible cone suitable for emergency or maintenance work. Heavy rubber base adds improved wind resistance and durability. Internal R-way light is powered by 2 standard AAA batteries (included). Includes built-in reflective collars. Total weight 4kgs.
Value features:
BTC720C-RB
Collapses from 720mm tall to 60mm. Very stable in high winds. In-built light can be set to flash or constant. Powered by standard AAA batteries. Very durable design.
PART No.
DESCRIPTION
BTC720C-RB
Collapsible cone (rubber base) – 720mm high
RETRACTABLE CONE BAR A durable, lightweight retractable or extendable cone bar for temporary barricading applications. Made from tough ABS plastic with rubberized loops at each end and reflective bands for enhanced visibility. Reflective yellow with black. TOP VIEW
Value features: Durable and lightweight. Extends from 1.2 to 2 metres. Yellow and black bands. Fits all standard cones. Extendable cone bar.
SIDE VIEW extends from 1.2 to 2m
RCB2 - RETRACTABLE CONE BAR (use with any standard cone)
PART No.
DESCRIPTION
RCB2
Retractable cone bar – 1.2 to 2.0 metres
77 RCB2. SECTION
06
FLEXIBLE BOLLARDS – One Piece Flexi A highly visible flexible polyurethane bollard that is virtually indestructible. Bright orange finish with reflective bands for increased night visibility. Use for lane delineation or identifying hazards, particularly in tight driving situations such as car parks etc.
Value features: Durable one piece moulding. Virtually indestructible (will not break or split). Rebounds after impact. Built in reflective bands. Available in 2 handy sizes.
PART No.
DESCRIPTION
FBP450 FBP800
Plastic one piece flexible bollard – 80 x 450mm Plastic one piece flexible bollard – 80 x 750mm
VEHICLE & PARKING
This flexible bollard will not break or split under impact.
Copyright © 2012 Barrier Group Pty. Ltd.
FLEXIBLE BOLLARDS – Two piece knockdown Knock down bollard with an elasticised joint for temporary or permanent delineator applications. Removable bollard post twist-locks into base. Post comes with reflective bands. The bollard is manufactured from fluorescent orange polyethylene. The rubber base is easily installed with epoxy or masonry anchors.
Value features: Soft, lightweight bollard takes the knocks without causing damage to vehicles. Strong elastic joint ensures bollard returns to upright position. Bollard can be removed from base. Reflective bands for greater night time visibility. PART No.
DESCRIPTION
KDB1000
Plastic two piece knockdown flexible bollard - 100 x 1000mm
KDB1000B
Replacement base only
KDB1000T
Replacement bollard top only
FLEXIBLE BOLLARDS – Two piece with chain loop A two piece knock down bollard with an elastic joint for temporary or permanent delineator applications. The removable bollard post twist locks into the rubber base. The post is supplied with a highly visible reflective band. The bollard is manufactured from tough red polyethylene that stands 800mm high. Furthermore, it incorporates a moulded chain ring to accept our range of high strength plastic chain in a range of colours.
78
PART No.
DESCRIPTION
FB800R
Plastic two piece knockdown flexible bollard with chain loop
PC6R-R
Plastic safety chain – 6.0mm Red per 25 metre roll
PC6Y-R
Plastic safety chain – 6.0mm Yellow per 25 metre roll
PC6RW-R
Plastic safety chain – 6.0mm Red/White per 25 metre roll
PC6W-R
Plastic safety chain – 6.0mm White per 25 metre roll
Moulded chain loop.
Two piece design with spring return.
800mm high with hi-vis reflective band.
SECTION
06
RE
CY
CL
ED
WHEEL CHOCKS Our recycled high quality moulded rubber wheel chock range is ideal for stopping vehicles, trucks, trailers and caravans from moving whilst not in use. Ideal for transport companies, mine sites and caravan owners.
WC1
WC1 – 255mm long x 210mm high x 180mm wide. Rope connection points moulded into the chock. Single side design. WC2 – 200mm long x 145mm high x 250 wide. Rope connection points moulded into the chock. Double sided design. WC3 – Super heavy duty truck chock, 305mm long x 260mm high x 300mm wide. WC3
PART No.
DESCRIPTION
WC1
Wheel chock 255 x 210 x 180mm (5.3kgs)
WC2
Wheel chock 200 x 145 x 250mm (6.5kgs)
WC3
Wheel chock 305 x 260 x 300mm (11.7kgs)
VEHICLE & PARKING
WC2
Copyright © 2012 Barrier Group Pty. Ltd.
RE
CY
CL
ED
KERB RAMP The KR1030 kerb ramp is a portable, heavy duty moulded rubber ramp suitable for trucks, cars or hand trolleys. Each unit has two recessed mounting holes for securing the ramp in place, manufactured from durable recycled rubber. The robust construction incorporates a 12 x 70mm drainage channel. To reveal channel simply trim cover panels from each end with a sharp knife. Dimensions 110mm high x 430mm deep x 480mm wide total weight 14.6kgs.
PART No.
DESCRIPTION
KR1030
Rubber kerb ramp 110 x 430 x 480mm (sold individually)
79 SECTION
06
VEHICLE & PARKING
Copyright Š 2012 Barrier Group Pty. Ltd.
INSPECTION MIRRORS Ideal for inspection below and above vehicles entering security areas. This light weight inspection mirror comes complete with 300mm diameter unbreakable polycarbonate lens, extendable aluminium handle, built-in torch for reflected light and triple snap on castors for working below vehicles. When not in use the mirror folds and is stored in its own convenient carry bag.
Value features: Lightweight and durable construction. Folds down into own carry bag. 300mm diameter polycarbonate lens. Built-in torch for lighting darkened areas. Castors for under vehicle viewing. Extends to 93cm.
PART No.
DESCRIPTION
MC300IN
Inspection mirror – 300mm
Vehicle inspection.
Compact carry bag.
ILLUMINATED BATONS A highly visible battery powered baton with two light settings, constant or flashing. Powered by two ‘D’ size batteries, it has been tested to over 300 hours. Lightweight but very durable. The baton is 540mm in length. Ideal for traffic management, outdoor events and emergency services.
Value features: Selectable for flash or constant light. Requires two ‘D’ size batteries (not included). Lightweight and comfortable to use. Long life, in excess of 300 hours per battery set.
80
PART No.
DESCRIPTION
IBLR
Illuminated baton 540mm – Red
Tested to over 300 hours on 2 ‘D’ size batteries.
SECTION
06
MARKING DOTS Durable injection moulded plastic dots for marking car parking bays etc. Can be fixed to asphalt with galvanised nail (supplied) or alternatively fixed into concrete surfaces using a suitable two-part epoxy adhesive system. Each marking dot sold separately and supplied with a galvanised fixing nail, white or high visibility yellow, 100mm in diameter.
Value features: Highly durable injection moulded plastic. Simple to install using galvanised nail supplied. Suitable for asphalt or concrete surfaces. Economical – no more fading line markings. Available in white or hi-vis yellow.
PART No.
DESCRIPTION
MD100S-W
Marking dots with spikes – White (sold separately)
MD100S-Y
Marking dots with spikes – Yellow (sold separately)
VEHICLE & PARKING
White or high visibility yellow marking dots. Copyright © 2012 Barrier Group Pty. Ltd.
SECTION
07
EXPANDING BARRIERS
Note: BPG600RW shown with optional locking castors.
When it comes to quality, range and exibility of design, our Port-a-guard systems leads the industry in expanding barriers. There are models to suit most situations, with a variety of accessories and spare parts to support them. Typical applications include denying pedestrian access to dangerous or sensitive areas, and closing off aisles when forklifts are operating. Being manufactured from aluminium and high-tech plastics means that all of our Port-a-guard models are suitable for both indoor and outdoor use.
You may also be interested in pages: 50
DOCK-SAFE-Q
89
NEATA
103
SKIPPER
112
CROWD-Q
PORT-A-GUARD EXPANDING BARRIERS All NEW BPG300 and BPG600 model Port-a-guards are not only the best all-round expanding barriers on the market, they now also represent exceptional value. Now, both models come boxed with all the attachments required for using your barrier in either the free-standing or wall-mounted configuration. This means that two separate barriers are now rolled into one. But that’s not all: you also receive a FREE sign mounting bracket, access to download FREE printable signs, and a FREE wall receiver bracket that allows your Port-a-guard to be locked to a wall or post when fully extended! Each boxed barrier also comes with a 12 page user guide. Both new models are available in Red and White or Black and Yellow colour combinations.
NEW VERSATILE 2-in-1 Design
WALL OR POST MOUNTED
Expands out to
3.0 METRES
BPG300BY Shown in freestanding configuration.
BPG300BY Shown in wall-mounted configuration.
WALL OR POST MOUNTED
82 Expands out to
6.0 METRES
SECTION
07
BPG600RW Shown in freestanding configuration.
EXPANDING BARRIERS
BPG600RW Shown in wall-mounted configuration.
Copyright © 2012 Barrier Group Pty. Ltd.
Value features: New exceptional value 2-in-1 design. Lower cost than the models they replace. Wider 400mm feet for increased stability. Supplied with free wall receiver bracket. Aluminium and hi-tech plastic construction. Range of tailored accessories available. Available in two colour combinations. Full range of spare parts available. Available in 3.0 metre and 6.0 metre models. Free printable sign downloads.
Specifications Description:
Fixed or Portable expanding barrier.
Material:
Posts & slats extruded aluminium. Fittings injection moulded ABS.
Finish:
Powder coated aluminium, black ABS.
Wall Receiver Bracket
New Foot Design
The wall receiver bracket allows your Port-a-guard to be locked in position to temporarily close off an area, restrict access or prevent unauthorised removal of your expanding barrier.
The stylish new foot design is injection moulded from durable ABS plastic. For increased stability, it is 65mm wider than the old model.
Spare Parts
Free Sign Downloads
In the event your Port-a-guard is damaged, we carry a full range of spare parts, including feet, brackets, slats and all fixings.
Purchase our optional A4 or A5 sign holder pockets and have FREE access to download and print a range of sign faces. Simply visit www.barsec.com.au.
Height (open): With out castors 990mm. With optional locking castors 1090mm. Width: BPG300 Extended 3.0 metres/closed 325mm. BPG600 Extended 6.0 metres/closed 625mm. Weight:
BPG300 (boxed) 5.7kgs. BPG600 (boxed) 9.8kgs.
PART No.
DESCRIPTION
BPG300RW
Port-a-guard expanding barrier 3.0 metre (2-in-1) kit – Red/White Port-a-guard expanding barrier 3.0 metre (2-in-1) kit – Black/Yellow Port-a-guard expanding barrier 6.0 metre (2-in-1) kit – Red/White Port-a-guard expanding barrier 6.0 metre (2-in-1) kit – Black/Yellow Optional locking castor (each) Optional 1.5kgs leg weight (each) Optional A4 sign pocket (each) Optional A5 sign pocket (each) Optional mounting post (each) Below ground kit for mounting post Additional wall/sign mount bracket Additional wall receiver bracket
BPG300BY BPG600RW BPG600BY BPG-LC BPG93 BPG-A4SH BPG-A5SH BPG29SM BGK4 BPG-WSB BPG-WR2
BPG300 (Red/White or Black/Yellow) A. 1 x Port-a-guard 3.0 metre body
MAX. 3000mm
B. 2 x Moulded feet C. 3 x Wall/Sign mounting brackets D. 1 x Wall receiver bracket
D
C
A
B
83 What you get in the BPG300 series kit. SECTION
07
BPG600 (Red/White or Black/Yellow) MAX. 6000mm
A. 1 x Port-a-guard 6.0 metre body B. 3 x Moulded feet C. 3 x Wall/Sign mounting brackets D. 1 x Wall receiver bracket
D
C
A
B
What you get in the BPG600 series kit.
EXPANDING BARRIERS
Copyright © 2012 Barrier Group Pty. Ltd.
OTHER MODELS BPG2 Port-a-guard Flexi The Port-a-guard Flexi is unlike any other product on the market. Apart from its ability to expand out to 5.4 metres, it also pivots at the middle through a full 270 degrees and can step up to 300mm for changing floor levels. A full range of spare parts and accessories is readily available for all Port-a-guard models. Finished in red/white or black/yellow powder coat. Weight 9.2kgs. Width when closed 300mm. Width when fully extended 2 x 2700mm.
PART No.
DESCRIPTION
BPG2RW
Port-a-guard flexi expanding barrier 2 x 2.7 metre – Red/White Port-a-guard flexi expanding barrier 2 x 2.7 metre – Black/Yellow
BPG2BY
BPG2BY shown.
BPG6 Port-a-guard Utility Consisting of three sides – each capable of expanding out to 2.6m – the Port-a-guard Utility has been designed for cordoning off small spaces. This Port-a-guard is manufactured from non-corrosive powder coated aluminium, and is compact and easily carried by one person. Spare parts and accessories are readily available for all Port-a-guard models. Finished in red/white or black/yellow powder coat. Weight 17kgs. Width when closed 360mm. Width when fully extended 3 x 2600mm.
PART No.
DESCRIPTION
BPG6RW
Port-a-guard utility expanding barrier 3 x 2.6 metre – Red/White Port-a-guard utility expanding barrier 3 x 2.6 metre – Black/Yellow
BPG6BY
BPG6RW shown.
BPGL8BY Port-a-guard Light
84 SECTION
07
The Port-a-guard Light is a portable, expanding crowd control barrier. Compact and lightweight, the BPGL8BY is suitable for both indoor and outdoor use, and the built-in handle and locking strap simplifies handling and portability. The plastic slats and legs are corrosion resistant, durable and lightweight. However, if extra stability is required – for example in windy conditions – the legs can be filled with water, adding weight. This Port-a-guard is truly a versatile and portable solution to your pedestrian traffic control problems. Finished in black/yellow plastic. Weight 3kgs. Closed 250mm. Open 2400mm at 970mm high.
PART No.
DESCRIPTION
BPGL8BY
Port-a-guard light expanding barrier 2.4 metre – Black/Yellow
EXPANDING BARRIERS
BPGL8BY shown.
Copyright © 2012 Barrier Group Pty. Ltd.
PORT-A-GUARD ACCESSORIES
Optional 1.5kg weights
BPG-LC
BPG-LPC
Locking Castors
Post Weights
Port-a-guard locking castors quickly and cost effectively convert your new or existing Port-a-guard, making it much easier to move about. Locking castors are sold individually. No special tools or modifications are necessary; simply attach the castors with the fixings provided. Two models available: BPG-LC for fixing to plastic feet and BPG-LPC for fixing to single posts.
Our optional base weights add 1.5kgs per post and are ideal for high-wind areas. Weights are sold individually.
BPG93
To install, simply remove the foot from the post, insert the weight into the post and re-fit the foot. Weights are held in position by the foot retaining screws. Mild steel with a zinc plated finish.
Note: Signs can be inserted back to back for double-sided viewing.
85 B
SECTION
A
Sign Pockets
07
BPG-A5SH / BPG-A4SH
Our new acrylic sign pockets forever eliminate the need to purchase expensive signs. Available to suit either A4 or A5 paper sizes, they are attached to the Port-a-guard using the bracket supplied with both BPG300 and BPG600 models. Additional sign brackets can be purchased. Simply make your own signs or visit www.barsec.com.au for a range of free sign faces to download and print on any office printer.
EXPANDING BARRIERS
Mounting Posts
BPG29SM
A freestanding post for installation of fixed Port-a-guards where there is not a wall or structure to mount off. Simply mount your Port-a-guard using the brackets supplied. The post is a steel structure with a base flange. It has a black powder coated finish. If mounting into a new concrete footing, use with BGK4 in-ground kit.
Copyright © 2012 Barrier Group Pty. Ltd.
PORT-A-GUARD MAXI With a standard opening of 6.7 metres, the Maxi takes the Port-a-guard range to a new level of versatility. With an increased height, reduced gap between the floor and the bottom of the barrier and smaller opening size between the slats, the Maxi offers an even greater level of security and safety. A combination of aluminium slats, galvanised slide components and stainless steel fixings means the Maxi is suited to both indoor and outdoor applications. The Maxi now has four locking castors as standard.
Value features: Complete with four heavy duty locking castors. Non-corrosive construction for outdoor use. Increased safety and security due to reduced opening sizes. Can be linked together to form a continuous barrier. Easily transported by one person.
Port-a-guard Maxi comes standard with 4 heavy duty locking swivel castors and central fixed dolly wheels for ease of movement from one location to another. Alternatively, Maxi can be wall mounted at one end using the optional wall receiver bracket and rolled out as required with minimal effort.
Specifications Description:
Portable expanding barrier.
Material:
Slats & posts – extruded aluminium. Slide guides – Hot dipped galvanised steel. Assembly fittings – Stainless steel. Natural aluminium.
Finish:
Expands out to
6.7 METRES
Height (open): 1430 mm from ground to top of slats. Width:
Open 6.7 metres / Closed 580mm.
Weight:
32.2kgs.
1430mm PART No.
DESCRIPTION
BPGM140
Port-a-guard maxi expanding barrier 1430mm x 6.7 metre
BPG-WR
Wall receiver bracket
BPGM-MC
Replacement middle castor assembly
BPGM-RF
Replacement foot with 2 castors
Heavy duty 75mm diameter locking swivel castors.
CLOSED 580mm
Solid 100mm diameter fixed dolly wheel.
86 SECTION
07
CLOSED: Port-a-guard Maxi.
EXPANDING BARRIERS
OPEN: Port-a-guard Maxi.
Copyright © 2012 Barrier Group Pty. Ltd.
SECTION
08
PEDESTRIAN CONTROL
This section offers portable and temporary products designed to control the movement of pedestrians. Whether queuing at the airport, separating people from vehicles or protecting them from hazards in the workplace. Featuring in this section is our newly expanded ‘Neata’ queue management system, which now incorporates features that allow up to 20 different post configurations and supports a full range of accessories and spare parts.
You may also be interested in pages: 32
BALL-FENCE
81
EXPANDING BARRIERS
103
SKIPPER
112
CROWD-Q
A FEW GOOD REASONS:
1
2
3
4
5
88 6
1. Unlike post and base designs, Neata in-floor posts don’t have to be moved for cleaning. This eliminates the daily routine of removing and repositioning, saving time, money and stress on staff. 2. With the posts installed the footprint is only 65mm in diameter. The elimination of bulky bases reduces tripping hazards and simplifies cleaning and maintenance. 3. With the posts removed the floor is left flush and capped, eliminating any risk of a tripping hazard. The diameter of the in-ground sleeve is an unobtrusive 25mm (NK80). An optional sleeve (pictured) with a 60mm diameter flange is available for carpeted floors. 4. The NK80 is a flush finish sleeve that provides a structured hold down point for the Neata in-floor posts. It is mechanically set, requires no adhesive and is made from marine grade 316 stainless steel. 5. Neata fixed posts are locked in place so they can not be easily removed by unauthorised people. This is a major safety feature and reduces liability. 6. Typical old style post and base barriers can weigh up to 14kgs. Neata fixed posts weigh a mere 3.2kgs and consume a fraction of the floor space. 7. All Neata in-floor and surface mount posts are manufactured from marine grade 316 stainless steel. 8. The in-floor ‘Flexi’ posts are a world first design allowing them to tilt up to 10 degrees on impact and return. This minimises potential damage to posts and injury to pedestrians.
(Based on a one metre wide aisle)
SECTION
08
PEDESTRIAN CONTROL
Copyright © 2012 Barrier Group Pty. Ltd.
89 SECTION
08
PEDESTRIAN CONTROL
Copyright © 2012 Barrier Group Pty. Ltd.
BELT POST In-floor Flexi The unique in-floor sleeves mean these posts can be deployed, removed or repositioned at any time by staff while remaining tamper resistant for improved public safety. A world first impact absorbing design that allows the post to tilt on impact by up to 10 degrees and return to its original position without damage. Furthermore, the design increases available floor space by up to 30%, improving wheelchair access and reducing tripping hazards.
Specifications
90 SECTION
08
PEDESTRIAN CONTROL
Post:
316 stainless, 63 x 1.6 x 950mm high.
Base:
Threaded in-floor stainless sleeve.
Footprint:
65mm in diameter.
Connection:
Flexible-impact absorbing.
Belt:
Retractable 2 metre 4-way.
Weight:
3.2kgs.
Installation:
Core drilled in-floor sleeve.
PART No.
DESCRIPTION
NBIF-BLK NBIF-BLU
Belt post in-floor flexi – Black Belt post in-floor flexi – Blue
NBIF-RED
Belt post in-floor flexi – Red
NBIF-YEL
Belt post in-floor flexi – Yellow
NBIF-BUR NBIF-BY
Belt post in-floor flexi – Burgundy Belt post in-floor flexi – Black/Yellow
Copyright © 2012 Barrier Group Pty. Ltd.
BELT POST Surface Mount Flexi
BELT POST Slimline Portable
BELT POST Highline Portable
The stainless steel surface mounted base plate is permanently fixed to the floor. Suitable for timber floors or anywhere in-floor sleeves are not appropriate. A world first impact absorbing design that allows it to tilt on impact by up to 10 degrees and return to its original position without damage. Furthermore, the design increases available floor space by up to 20%, improving wheelchair access and reducing tripping hazards, and results in a safer, tamper-proof system.
An ultra low profile base that minimizes intrusion while maximizing stability. At less than 10mm high wheelchairs, strollers and suitcases can easily navigate over it. Slimline is our premium portable post and base unit. It is manufactured from 304 stainless steel with a padded underside for protecting sensitive floors.
Highline is our most popular portable post and base belt barrier. The moulded rubber base is covered with a 304 grade spun stainless steel skirt for a high quality finish. The non-marking rubber base is gentle on floors and extremely stable.
Specifications Post:
304 stainless, 63 x 1.6 x 950mm high.
Specifications Post:
304 stainless, 63 x 1.6 x 950mm high.
Base:
Moulded rubber with stainless skirt.
316 stainless, 63 x 1.6 x 950mm high.
Base:
370dia x 8mm stainless steel.
Footprint:
380mm in diameter.
Footprint:
370mm in diameter.
Connection:
Portable free-standing.
Base:
150dia x 6mm stainless steel.
Connection:
Portable free-standing.
Belt:
Retractable 2 metre 4-way.
Footprint:
150mm in diameter.
Belt:
Retractable 2 metre 4-way.
Weight:
10.5kgs.
Connection:
Flexible-impact absorbing.
9.6kgs.
Installation:
Not required.
Belt:
Retractable 2 metre 4-way.
Installation:
Not required.
Assembly:
Single M10 bolt (supplied).
Weight:
5.2kgs.
Assembly:
Single M10 bolt (supplied).
Installation:
3 off fixings, (purchased separately).
Specifications Post:
Weight:
91
PART No.
DESCRIPTION
PART No.
DESCRIPTION
PART No.
DESCRIPTION
NBSMF-BLK NBSMF-BLU
Belt post surface mount flexi – Black Belt post surface mount flexi – Blue
Belt post highline portable – Black Belt post highline portable – Blue
Belt post surface mount flexi – Red
NBHL-RED
Belt post highline portable – Red
NBSMF-YEL
Belt post surface mount flexi – Yellow
NBHL-YEL
Belt post highline portable – Yellow
NBSMF-BUR NBSMF-BY
Belt post surface mount flexi – Burgundy Belt post surface mount flexi – Black/Yellow
Belt post slimline portable – Black Belt post slimline portable – Blue Belt post slimline portable – Red Belt post slimline portable – Yellow Belt post slimline portable – Burgundy Belt post slimline portable – Black/Yellow
NBHL-BLK NBHL-BLU
NBSMF-RED
NBSL-BLK NBSL-BLU NBSL-RED NBSL-YEL NBSL-BUR NBSL-BY
NBHL-BUR NBHL-BY
Belt post highline portable – Burgundy Belt post highline portable – Black/Yellow
PEDESTRIAN CONTROL
Copyright © 2012 Barrier Group Pty. Ltd.
SECTION
08
WALL MOUNT BARRIERS
BELT POST Econoline Portable
BELT POST Extreme Portable
Wall mount belt barriers are designed to complement other post units in the Neata range, or to be used as standalone barriers for aisle closures or supermarket checkouts etc. They use the same 2 metre belt cassettes as the posts in a welded 316 grade stainless steel body, with mounting brackets for attaching to a wall or post.
The Econoline is our most affordable portable post and base belt barrier, offering an economical alternative to the high end Slimline or Highline models. The weighted base is covered with a polished stainless steel skirt for a quality finish. The base has built-in scuff pads to protect sensitive floors. Furthermore, the NBEL is compatible with our other belt barriers, as it uses the same belt cassettes.
The Neata Extreme is the perfect retractable belt barrier for tough, industrial-type environments.The UPVC post with moulded rubber base means the Extreme can be used indoors or outdoors in any conditions. The non-marking rubber base is gentle on floors and extremely stable.
Specifications Post:
316 stainless, 63 x 1.6 x 950mm high.
Base:
Welded stainless steel legs.
Connection:
Wall or post mount.
Belt:
Retractable 2 metre 1-way.
Weight:
1.3kgs (approx.)
Installation:
Attached by screws at four places (supplied).
92 SECTION
08
Specifications Specifications Post:
304 stainless, 63 x 0.8 x 900mm high.
Base:
Weighted with stainless skirt.
Footprint:
330mm in diameter.
Connection:
Portable free-standing.
Belt:
Retractable 2 metre 4-way.
Weight:
8.0kgs.
Installation:
Not required.
Assembly:
Single M10 bolt (supplied).
Post:
Yellow UPVC, 63 x 1.6 x 950mm high.
Base:
Moulded rubber.
Footprint:
380mm in diameter.
Connection:
Portable free-standing.
Belt:
Retractable 2 metre 4-way.
Weight:
8.5kgs.
Installation:
Not required.
Assembly:
Single M10 bolt (supplied).
PART No.
DESCRIPTION
PART No.
DESCRIPTION
PART No.
DESCRIPTION
NWM-BLK NWM-BLU
Wall mount belt barrier – Black Wall mount belt barrier – Blue
NBEL-BLK NBEL-BLU
Belt post econoline portable – Black Belt post econoline portable – Blue
NBEX-BLK NBEX-BLU
Belt post extreme portable – Black Belt post extreme portable – Blue
NWM-RED
Wall mount belt barrier – Red
NBEL-RED
Belt post econoline portable – Red
NBEX-RED
Belt post extreme portable – Red
NWM-YEL
Wall mount belt barrier – Yellow
NBEL-YEL
Belt post econoline portable – Yellow
NBEX-YEL
Belt post extreme portable – Yellow
NWM-BUR NWM-BY
Wall mount belt barrier – Burgundy Wall mount belt barrier – Black/Yellow
NBEL-BUR NBEL-BY
Belt post econoline portable – Burgundy Belt post econoline portable – Black/Yellow
NBEX-BUR NBEX-BY
Belt post extreme portable – Burgundy Belt post extreme portable – Black/Yellow
PEDESTRIAN CONTROL
Copyright © 2012 Barrier Group Pty. Ltd.
RAIL POST In-floor Rigid
RAIL POST Surface Mount Rigid
The unique in-floor sleeves mean these posts can be deployed, removed or repositioned if required. While these posts look identical to the ‘In-floor Flexi’ posts they have had the impact absorbing feature disabled as the rails require a rigid post. As rail posts can be fitted with a range of rail combinations which can also include in-fill panels they are made to order. The small footprint increases available floor space by up to 30%, improves wheelchair access and reduces tripping hazards.
A surface mounted rigid rail post for permanent placement or for installation into timber floors. While these posts look identical to the ‘Surface Mount Flexi’ posts they have had the impact absorbing feature disabled, as the rails require a rigid post. As rail posts can be fitted with a range of rail combinations which can also include in-fill panels they are made to order. The small footprint increases available floor space by up to 20%, improves wheelchair access and reduces tripping hazards.
Specifications
Specifications
Post:
316 stainless, 63 x 1.6 x 950mm high.
Post:
316 stainless, 63 x 1.6 x 950mm high.
Base:
Threaded in-floor stainless steel sleeve.
Base:
150 dia x 6mm thick stainless steel plate.
Footprint:
65mm in diameter.
Footprint:
150mm in diameter.
Connection:
Rigid 16mm thread.
Connection:
Rigid.
Rails/In-fills: Any configuration, (made to order).
PEDESTRIAN CONTROL
Rails/In-fills: Any configuration, (made to order).
Weight:
3.0kgs (post only).
Weight:
5.0kgs (post only).
Installation:
Core drilled in-floor sleeve.
Installation:
3 fixings per post, (purchased separately).
PART No.
DESCRIPTION
PART No.
DESCRIPTION
NRLIR NFR-100
Rail post in-floor rigid 1 metre st/st rail with fittings
NRLSMR NFR-100
Rail post surface mount rigid 1 metre st/st rail with fittings
NFR-150 NFR-200
1.5 metre st/st rail with fittings 2 metre st/st rail with fittings
NFR-150 NFR-200
1.5 metre st/st rail with fittings 2 metre st/st rail with fittings
Copyright © 2012 Barrier Group Pty. Ltd.
93 SECTION
08
94
HOOK POST In-floor Flexi
HOOK POST Surface Mount Flexi
The unique in-floor sleeves mean these posts can be deployed, removed or repositioned at any time by staff while remaining tamper resistant to the public.
The stainless steel surface mounted base plate is permanently fixed to the floor. Suitable for timber floors or anywhere in-floor sleeves are not appropriate.
Incorporating a world first impact absorbing design that allows it to tilt on impact by up to 10 degrees and return to its original position without damage. Furthermore, the design increases available floor space by up to 30%, improving wheelchair access and reducing tripping hazards and results in a safer, tamper-proof system.
Incorporates world first impact absorbing design that allows it to tilt on impact by up to 10 degrees and return to its original position without damage. Furthermore, the design increases available floor space by up to 20%, improving wheelchair access and reducing tripping hazards and results in a safer, tamper-proof system.
Specifications
Specifications
Post:
316 stainless, 63 x 1.6 x 950mm high.
Post:
316 stainless, 63 x 1.6 x 950mm high.
Base:
Threaded in-floor stainless steel sleeve.
Base:
150 dia x 6mm thick stainless steel plate.
Footprint:
65mm in diameter.
Footprint:
150mm in diameter.
Connection:
Flexible-impact absorbing.
Connection:
Flexible-impact absorbing.
Hook:
1, 2, 3 or 4 way snap hooks.
Hooks:
1, 2, 3 or 4 way snap hooks.
Weight:
3.2kgs.
Weight:
5.2kgs.
Installation:
Core drilled in-floor sleeve.
Installation:
3 fixings per post, (purchased separately).
SECTION
08
PEDESTRIAN CONTROL
PART No.
DESCRIPTION
PART No.
NHIF-1WAY NHIF-2WAY
Hook post in-floor flexi – 1 way Hook post in-floor flexi – 2 way
NHSMF-1WAY Hook post surface mount flexi – 1 way NHSMF-2WAY Hook post surface mount flexi – 2 way
NHIF-3WAY NHIF-4WAY
Hook post in-floor flexi – 3 way Hook post in-floor flexi – 4 way
NHSMF-3WAY Hook post surface mount flexi – 3 way NHSMF-4WAY Hook post surface mount flexi – 4 way
DESCRIPTION
Copyright © 2012 Barrier Group Pty. Ltd.
HOOK POST Slimline Portable
HOOK POST Highline Portable
HOOK POST Extreme Portable
An ultra low profile base that minimizes intrusion while maximizing stability. At less than 10mm high, wheelchairs, strollers and suitcases can easily navigate over it. Slimline is our premium portable post and base unit. It is manufactured from 304 stainless steel and has a padded underside for protecting sensitive floors.
Highline is our most popular selling portable post and base barrier. The moulded rubber base is covered with a 304 grade spun stainless steel skirt for a high quality finish. The non-marking rubber base is gentle on floors and is extremely stable.
The Neata Extreme is the barrier for tough industrial type environments. The UPVC post with moulded rubber base means the Extreme can be used indoors or outdoors in any conditions. The non-marking rubber base is gentle on floors and extremely stable. Accepts Neata ropes, plastic or stainless steel chain.
Specifications Specifications
Post:
304 stainless, 63 x 1.6 x 950mm high.
Specifications Post:
Post:
304 stainless, 63 x 1.6 x 950mm high.
Base:
Moulded rubber with stainless skirt.
Yellow UPVC, 63 x 1.6 x 950mm high.
Base:
Moulded rubber.
Base:
370dia x 8mm stainless steel.
Footprint:
380mm in diameter.
Footprint:
380mm in diameter.
Footprint:
370mm in diameter.
Connection:
Portable free-standing.
Connection:
Portable free-standing.
Connection:
Portable free-standing.
Hook:
1, 2, 3 or 4 way snap hooks.
Hook:
1, 2, 3 or 4 way snap hooks.
Hook:
1, 2, 3 or 4 way snap hooks.
Weight:
10.5kgs.
Weight:
8.5kgs.
Weight:
9.6kgs.
Installation:
Not required.
Installation:
Not required.
Installation:
Not required.
Assembly:
Single M10 bolt (supplied).
Assembly:
Single M10 bolt (supplied).
Assembly:
Single M10 bolt (supplied).
95 SECTION
PART No.
DESCRIPTION
PART No.
DESCRIPTION
PART No.
DESCRIPTION
NHSL-1WAY NHSL-2WAY
Hook post slimline portable – 1 way Hook post slimline portable – 2 way
NHHL-1WAY NHHL-2WAY
Hook post highline portable – 1 way Hook post highline portable – 2 way
NHEX-1WAY NHEX-2WAY
Hook post extreme portable – 1 way Hook post extreme portable – 2 way
NHSL-3WAY NHSL-4WAY
Hook post slimline portable – 3 way Hook post slimline portable – 4 way
NHHL-3WAY NHHL-4WAY
Hook post highline portable – 3 way Hook post highline portable – 4 way
NHEX-3WAY NHEX-4WAY
Hook post extreme portable – 3 way Hook post extreme portable – 4 way
PEDESTRIAN CONTROL
Copyright © 2012 Barrier Group Pty. Ltd.
08
PLAIN POST In-floor Flexi
PLAIN POST In-floor Rigid
The unique in-floor sleeves mean these posts can be deployed, removed or repositioned at any time by staff while remaining tamper resistant to the public. Incorporating a world first impact absorbing design that allows it to tilt on impact by up to 10 degrees and return to its original position without damage. Furthermore, the design increases available floor space by up to 30%, improving wheelchair access and reducing tripping hazards and results in a safer, tamper-proof system.
The unique in-floor sleeves mean these posts can be deployed, removed or repositioned if required. While these posts look identical to the ‘In-floor Flexi’ posts they have had the impact absorbing feature disabled to provide a rigidly mounted post. Plain posts can be slotted if necessary to accept a range of accessories. Furthermore, the small footprint increases available floor space by up to 30%, improving wheelchair access and reducing tripping hazards. Often used around escalators to prevent trolley access.
Specifications
96
Post:
316 stainless, 63 x 1.6 x 950mm high.
Post:
316 stainless, 63 x 1.6 x 950mm high.
Base:
Threaded in-floor stainless steel sleeve.
Base:
Threaded in-floor stainless steel sleeve.
Footprint:
65mm in diameter.
Footprint:
65mm in diameter.
Flexible-impact absorbing.
Connection:
Rigid 16mm thread.
Weight:
3.2kgs.
Slots:
Installation:
Core drilled in-floor sleeve.
Any configuration, (made to order).
Weight:
3.2kgs.
Installation:
Core drilled in-floor sleeve.
Connection:
SECTION
08
PEDESTRIAN CONTROL
Specifications
PART No.
DESCRIPTION
PART No.
DESCRIPTION
NPIF
Plain post in-floor flexi
NPIR
Plain post in-floor rigid
Copyright © 2012 Barrier Group Pty. Ltd.
PLAIN POST Surface Mount Flexi PLAIN POST Surface Mount Rigid The stainless steel surface mounted base plate is permanently fixed to the floor. Suitable for timber floors or anywhere in-floor sleeves are not appropriate. Incorporating a world first impact absorbing design that allows it to tilt on impact by up to 10 degrees and return to its original position without damage. Furthermore, the design increases available floor space by up to 20%, improving wheelchair access, reduces tripping hazards and is tamper proof for improved safety. Plain posts can be slotted if necessary to accept a range of accessories.
Specifications
A surface mounted rigid post for permanent placement or for installing on timber floors. While these post look identical to the ‘Surface Mount Flexi’ posts they have had the impact absorbing feature disabled to provide a rigidly mounted post. Plain posts can be slotted if necessary to accept a range of accessories. Furthermore, the small footprint increases available floor space by up to 20%, improves wheelchair access and reduces tripping hazards.
Specifications Post:
316 stainless, 63 x 1.6 x 950mm high.
Post:
316 stainless, 63 x 1.6 x 950mm high.
Base:
150 dia x 6mm thick stainless steel.
Base:
150dia x 6mm stainless steel.
Footprint:
150mm in diameter.
Footprint:
150mm in diameter.
Connection:
Rigid.
Connection:
Flexible-impact absorbing.
Slots:
Slots:
Any configuration, (made to order).
Any configuration, (made to order).
Weight:
5.0kgs (post only).
Weight:
5.2kgs (post only).
Installation:
Installation:
3 fixings per post, (purchased separately).
3 fixings per post, (purchased separately). SECTION
08
PART No.
DESCRIPTION
PART No.
DESCRIPTION
NPSMF
Plain post surface mount flexi
NPSMR
Plain post surface mount rigid
PEDESTRIAN CONTROL
97
Copyright © 2012 Barrier Group Pty. Ltd.
USING THE NEATA POST NUMBER, FIND WHAT ACCESSORIES ARE AVAILABLE:
BELTS RAILS HOOKS PLAIN
PAGE POST No. 90 NBIF 91 NBSMF 91 NBSL 91 NBHL 92 NWM 92 NBEL 92 NBEX 93 NRLIR 93 NRLSMR 94 NHIF 94 NHSMF 95 NHSL 95 NHHL 95 NHEX 96 NPIF 96 NPIR 97 NPSMF 97 NPSMR
DESCRIPTION (base type) Belt post in-floor flexi
ACCESSORY CODE D
E
F
H
M
N
Belt post surface mount flexi
D
E
Belt post slimline portable
D
E
F
H
M
N
F
H
M
N
Belt post highline portable
D
E
F
H
M
N
Wall mount barriers
D
E
F
H
M
N
Belt post econoline portable
D
E
F
H
M
N
Belt post extreme portable
D
E
F
H
M
N
Rail post in-floor rigid
A
A
B
B
C
C
Rail post surface mount rigid Hook post in-floor flexi
G
E
G
E A
B
C
G
H
J
M
N
H
J
M
N
H
I
K
L
M
N
Hook post surface mount flexi
H
I
K
L
M
N
Hook post slimline portable
H
I
K
L
M
N
Hook post highline portable
H
I
K
L
M
N
Hook post extreme portable
H
I
K
L
M
N
O
O O
Plain post in-floor flexi
A
B
C
G
M
N
O
Plain post in-floor rigid
A
B
C
G
M
N
O
Plain post surface mount flexi
M
N
Plain post surface mount rigid
M
N
Accessories that are compatible with the post.
A
98 SECTION
08
B
C
80MM KNOCK-IN SLEEVES
50MM EPOXY SLEEVES
150MM EPOXY SLEEVES
For use with ‘in-floor’ posts. The NK80 is a flush finish 316 stainless steel in-floor mechanical anchor with an M20 internal thread. It is designed for shallow embedment in concrete or hard natural stone. The anchor is placed in a 25mm diameter by 85mm deep hole. Using the correct setting tool and a few hammer blows the anchor is expanded in the hole to create a positive hold down point. The sleeves can be fully loaded immediately. Each sleeve comes with a press fit flush cap, optional 316 stainless steel screw-in caps are available if required. See page 101.
For use with ‘in-floor’ posts. The NE50-FS and NE50-CS are flush finish in-floor chemical anchors with an M20 internal thread. They have been designed for shallow embedment in reinforced concrete requiring only a 50mm deep hole. The NE50-FS is designed for bare floors while the NE50-CS is used for carpeted floors. Both models are machined from marine grade 316 stainless steel and are fixed into a 35mm diameter hole using a 2 part epoxy adhesive. Each sleeve is supplied with a press fit flush cap or optional stainless steel screw-in caps are available if required.
For use with ‘in-floor’ posts. The NE150-FS and NE150-CS are flush finish in-floor chemical anchors with an M20 internal thread. They have been designed for deeper embedment in reinforced concrete. The NE150-FS is designed for bare floors while the NE150-CS is used for carpeted floors. Both models are machined from marine grade 316 stainless steel and are fixed into a 35mm diameter hole using a 2 part epoxy adhesive. Each sleeve is supplied with a press fit flush cap or optional stainless steel screw-in caps are available if required.
PART No.
DESCRIPTION
NK80-FS
Knock-in floor sleeve with cap Knock-in floor sleeve with carpet ring & cap
NK80-CS NK80-ST NKCAP NKCAP-SS
NK80 setting tool (one) Additional plastic Neata cap Optional stainless screw-in cap
PEDESTRIAN CONTROL
PART No.
DESCRIPTION
PART No.
DESCRIPTION
NE50-FS NE50-CS
50mm epoxy sleeve with cap 50mm epoxy carpet sleeve with cap
NE150-FS NE150-CS
150mm epoxy sleeve with cap 150mm epoxy carpet sleeve with cap
NKCAP
Additional plastic Neata cap Optional stainless screw-in cap
NKCAP NKCAP-SS
Additional plastic Neata cap
NKCAP-SS
Optional stainless screw-in cap
Copyright © 2012 Barrier Group Pty. Ltd.
D
E
F
BELT PRINTING
WALL RECEIVER (BELT)
REPLACEMENT CASSETTES
Custom screen printing of belts is a high profile way to promote your brand or include a message or warning. Printing can be single or double sided and is limited to a maximum of 2 colours per side. All printing requires a one-off setup/artwork cost and a printing charge per belt. Please refer to our customer service staff for more information. Please note there may be some limitations on the detail possible due to the texture of the belt fabric.
Wall receivers allow belts to be terminated at any wall or post etc. All Neata belt posts and wall mount belt barriers are compatible with these wall receivers. They are injection moulded from black nylon and attached with two self tapping screws provided.
Although our belt cassettes have a very reliable history, they are often installed in high-traffic pedestrian areas and as such can be subjected to a great deal of abuse. With Neata posts and wall mounts, damaged cassettes can be replaced in minutes using only a screw driver. Replacement cassettes are sold as a complete unit available in a range of colours.
PART No.
DESCRIPTION
NSPA NSP2
Setup/artwork charge (once) Printing of 2 metre belt (each)
G
PART No.
DESCRIPTION
NBWR
Belt wall mount receiver
H
PART No.
DESCRIPTION
NRBC-BLK NRBC-BLU
Belt cassette – Black Belt cassette – Blue
NRBC-RED
Belt cassette – Red
NRBC-YEL
Belt cassette – Yellow
NRBC-BUR NRBC-BY
Belt cassette – Burgundy Belt cassette – Black/yellow
I
POST LOCKING TOOL
CASSETTE CLIPS
WALL RECEIVER (HOOK)
The Neata post locking tool serves two purposes. Firstly, it is used to lock and release in-floor posts from the ground and secondly, it is used for removing the flush caps from the infloor sleeves. One locking tool is supplied with every order for Neata in-floor posts, however additional tools are available. Manufactured from laser cut mild steel with a zinc plated finish.
These two injection moulded nylon clips can be retro-fitted to any existing Neata post. The hook clip (NCHC-BN), above left, allows for the inclusion of rope/chain connection points to existing belt or rail posts. The blanking clip (NCBC-BN), above right, can be used to replace unwanted belt receiver clips on posts, thereby eliminating snag points to passing pedestrians. Greater choice – greater flexibility.
Wall receivers allow ropes and chains to be terminated at any wall or post etc. All Neata braided ropes and chains are compatible with these wall receivers. They are injection moulded from black nylon and are attached with two self tapping screws provided.
99 SECTION
08 PART No.
DESCRIPTION
NLT
Neata post locking tool
PEDESTRIAN CONTROL
PART No.
DESCRIPTION
NCBC-BN NCHC-BN
Cassette blanking clip Cassette hook clip
PART No.
DESCRIPTION
NHWR
Hook wall mount receiver
Copyright © 2012 Barrier Group Pty. Ltd.
J
K
L
STAINLESS STEEL RAILS
BRAIDED ROPES
CHAIN
For use with rigid rail posts. These stainless steel rails come complete with flexible, locking connectors ready to attach to the rail post receivers. They are manufactured from polished 304 grade rectangular stainless steel tube, 75 x 10mm with a 1.6mm wall. Standard lengths suit 1, 1.5 and 2 metre post centres. However, any length in between can be accommodated simply by cutting down the length of the tube and refitting the connectors.
A selection of high quality braided ropes in a range of colours with machined stainless steel end ferrules. Our standard ropes are made to suit 2 metre post centres. However custom made ropes can be made in any length up to 2.5 metres.
For use with hook posts. Two chain types are available in either plastic or stainless steel. The economical 6mm plastic chain sold in 25 metre rolls. While the high quality 6mm stainless steel chain sold loose by the metre.
PART No.
DESCRIPTION
NROPE-BLK NROPE-BLU
2 metre rope – Black 2 metre rope – Blue
NROPE-RED
2 metre rope – Red
PART No.
DESCRIPTION
NROPE-BUR
2 metre rope – Burgundy
PC6R-R
6mm plastic chain – Red/roll
PART No.
DESCRIPTION
NRCUS-BLK
Custom rope – Black
PC6Y-R
6mm plastic chain – Yellow/roll
NFR-100 NFR-150 NFR-200
Rail to suit 1 metre post centres Rail to suit 1.5 metre post centres Rail to suit 2 metre post centres
NRCUS-BLU
Custom rope – Blue
PC6RW-R
6mm plastic chain – Red-white/roll
NRCUS-RED NRCUS-BUR
Custom rope – Red Custom rope – Burgundy
PC6W-R SSC6
6mm plastic chain – White/roll 6mm stainless steel chain/mtr
M
O
N
SIGN HOLDERS
BROCHURE DISPENSERS
POST STORAGE TROLLEY
Available in A4 and A5 sizes these sign holders attach directly onto the belt posts and are designed to take laser printed or laminated signs. The sign simply slips into the acrylic pocket and can be viewed from both sides. For rail and hook posts an additional clip will be required (NCSC-BN) for attachment.
Available in A4, A5 and DL sizes these sign holders are designed to attach directly onto belt posts. For rail and hook posts an additional clip will be required (NCSC-BN). Each holder has a capacity for approximately 100 sheets.
A heavy duty mobile trolley for the storage and handling of up to 40 in-floor Neata posts. Swivelling and locking castors ensure the fully loaded trolley is stable and easy to manoeuver. The folding handle allows the trolley to be stored in a minimum of space when not in service.
100 SECTION
08 PART No.
DESCRIPTION
NSH-A4 NSH-A5 NCSC-BN
A4 sign holder assembly A5 sign holder assembly Cassette slide clip
PEDESTRIAN CONTROL
PART No.
DESCRIPTION
NBD-A4 NBD-A5
A4 brochure dispenser A5 brochure dispenser
NBD-DL NCSC-BN
DL brochure dispenser Cassette slide clip
PART No.
DESCRIPTION
NST-40
Storage trolley for 40 in-floor posts
Copyright © 2012 Barrier Group Pty. Ltd.
IP22
1
2
3
4
1. H aving determined the optimum layout to suit your requirements, set out the desired post locations and mark the hole centres on the floor. The post centres should not exceed 2 metres. Next, drill the marked holes using a 25mm diameter core drill to a depth of 85mm. It is important that the holes are drilled plumb as this will have a bearing on the posts once installed. 2. Remove the concrete bung from the hole by carefully tapping it at the top with the end of a chisel or screwdriver. Clean out the hole and ensure the depth is correct to accept the sleeve. 3. Place the NK80 sleeve into the hole so that it is flush with the floor surface. Insert the setting tool NK80-ST into the sleeve and tap lightly to achieve initial take up in the hole, follow with 2 heavier hammer blows. The setting tool will imprint verification marks into the top of the sleeve when full expansion is achieved. 4. Screw the post into the sleeve and tighten by hand, place the locking tool in the small hole in the post and tighten in a clockwise direction until firm. Note: It is not necessary to over tighten the post when using the locking tool. 5. To remove the post simply reverse the locking tool in the hole and turn counter clockwise. There will be an initial free play when rotating, this is normal. 6. Whenever posts are removed the holes should always be capped to avoid ingress of debris or tripping hazards. CAUTION: Safety glasses and protective gloves are required for this installation.
101 section
08
Copyright © 2012 Barrier Group Pty. Ltd.
5
6
RETRACTA-BELT WALL MOUNT – 7.6 METRE Retracta-belt Wall Mount units are designed for wall mounting where floor space is limited or post and base units are not appropriate. This model is particularly useful in large span situations such as warehouse aisle closures and loading docks etc.
Specifications Material:
Powder coated aluminium housing.
Weight:
1.2kgs.
Extensions:
0 - 7.6 metres.
Delivery:
Individually packaged with fixings and wall receiver end. Available in four standard colours.
Belt:
Installations: Permanent. Screw fixed.
See also Neata Wall Mount on page 92.
PART No.
DESCRIPTION
RWM76-BYD
Retracta-belt 7.6 metre wall mount – Black/Yellow
RWM76-RD
Retracta-belt 7.6 metre wall mount – Red
RWM76-YW
Retracta-belt 7.6 metre wall mount – Yellow
RWM76-BK
Retracta-belt 7.6 metre wall mount – Black
NBWR
Additional wall receiver clip
Belt spans up to 7.6 metres.
Wall mount unit (NBWR).
Belts available in four standard colours.
RETRACTA-BELT MAGNA MOUNT – 7.6 METRE The Magna-mount has all the features of the 7.6 metre wall mount model (above). Furthermore, it has the added flexibility of being able to be quickly repositioned, using the magnetic base mount and magnetic belt clip. Safety bungy prevents damage if the Magna-mount is accidentally dislodged.
Specifications Material:
Powder coated alum. housing.
Weight:
1.5kgs.
Extension:
0 - 7.6m.
Delivery: Belt:
Complete with magnetic base and belt clip. Available in four standard colours.
Installation:
Semi-permanent. Magnetic fixed.
Magnetic base mount.
102 SECTION
08
PART No.
DESCRIPTION
RMM76-BYD
Retracta-belt 7.6 metre magna-mount – Black/Yellow
RMM76-RD
Retracta-belt 7.6 metre magna-mount – Red
RMM76-YW
Retracta-belt 7.6 metre magna-mount – Yellow
RMM76-BK
Retracta-belt 7.6 metre magna-mount – Black
PEDESTRIAN CONTROL
Safety bungy.
Magnetic belt clip.
Copyright © 2012 Barrier Group Pty. Ltd.
SKIPPER – Retractable tape barrier SkipperTM is a unique, purpose designed approach to traffic and facilities management. It allows you to cordon off hazardous or restricted areas indoors or outdoors quickly and cost effectively. Skippers fully retractable 9.0 metre tape enables all areas to be closed off using standard weighted-base cones or UPVC posts. Simply fit Skipper over the top of your cone or post or, if you wish, Skipper can be screwed to the cone for greater security. Alternatively, using our optional wall mount bracket, Skipper can be used to block doorways, close off aisles in warehouses or anywhere that requires a fixed barrier. Also available is a switchable warning light with built-in daylight sensor.
Value features: Full 9.0 metre retractable tape. Push button tape lock to prevent tampering. Tough, corrosion proof moulded housing. Four way connectivity. Unique belt clip allows belt to hook back onto itself. Fits standard 1.0 metre traffic cones or UPVC posts. High visibility Red/White or Black/Yellow tape. Wall mount bracket available. Optional emergency light. Optional sign holders and signs.
The Skipper allows you to cordon off hazardous or restricted areas indoors or outdoors.
Specifications: Description:
Skipper retractable barrier.
Material:
Housing – High impact polypropylene. Tape – Reinforced nylon with water repellent coating.
Tape finish:
Red/white or black/yellow diagonal stripes. Red and White (SKIP-RW).
Tape Length: 9.0 metres. Housing:
250mm high x 150mm in diameter.
Weight:
SKIP-BY/RW – 0.88kg.
Black and Yellow (SKIP-BY).
How it works
See also ‘Port-a-guard’ expanding barriers on pages 81-86.
Fit Skipper onto top of the cone or post & base unit. Secure with screws if required.
Pull the tape out to the desired length.
103 SECTION
08 PART No.
DESCRIPTION
SKIP-RW
Skipper retractable barrier 9.0 metre – Red/White
SKIP-BY
Skipper retractable barrier 9.0 metre – Black/Yellow
PEDESTRIAN CONTROL
Clip the tape to the next skipper or receiver unit.
Lock the tape button to prevent unwanted spooling.
Copyright © 2012 Barrier Group Pty. Ltd.
SKIPPER ONE METRE CONE A 1.0 metre high stackable cone manufactured from tough polyethylene with a heavy rubber base for stability and reflective collar for improved visibility. Skipper simply fits over the cone and can be screw fixed for extra security if required. Belt height 1090mm. (Skipper not included).
SKIPPER CONE MOUNT RECEIVER UNIT This receiver unit is a press fit onto our 1.0 metre cone. For extra security use the fixing screws provided. Features include solid aluminium construction with anodised finish and two-way connectivity allowing two Skipper units to span up to 18 metres. A twist and lock cap prevents belts dislodging in windy conditions. PART No.
DESCRIPTION
BTC1000R
Skipper cone – 1.0 metre high
SKRCA
Skipper cone mount receiver unit (order separately)
1 metre cone (BTC1000R).
Cone Mount Receiver (SKRCA).
UPVC Post & Base. (Grey or Yellow).
UPVC Receiver Post & Base. (SKPRP-G or SKPRP-Y).
Skipper wall mount (SKWM).
Wall mount receiver (SKRC).
SKIPPER POST & BASE A post & base unit designed to accept the Skipper unit. The UPVC posts are available in yellow or grey and are 63.5mm in diameter. The heavy rubber base offers stability. Belt height 990mm. (Skipper not included).
SKIPPER RECEIVER POST & BASE A receiver post to compliment the Skipper post & base above. Features include solid aluminium construction, anodised finish and two-way connectivity. A twist and lock cap prevents belts dislodging in windy conditions. (Includes post, base and receiver head). PART No.
DESCRIPTION
SKPBY
Skipper post & base – Yellow
SKPBG
Skipper post & base – Grey
SKPRP-Y
Skipper receiver post & base – Yellow
SKPRP-G
Skipper receiver post & base – Grey
SKIPPER WALL MOUNT BRACKET The Skipper wall mount bracket allows Skippers to be used without the need for cones or posts and can be mounted to walls or columns. It is manufactured from heavy steel components and zinc plated to resist rust. (Skipper not included).
SKIPPER WALL MOUNT RECEIVER UNIT
104 SECTION
08
This belt receiver unit can be mounted to any wall or column. It is compatible with Skippers mounted on cones, post & base units or wall mount brackets. Manufactured from aluminium with an anodised finish, it is both compact and attractive.
PART No.
DESCRIPTION
SKWM
Skipper wall mount bracket
SKRC
Skipper wall mount receiver unit
PEDESTRIAN CONTROL
Copyright © 2012 Barrier Group Pty. Ltd.
SKIPPER SIGN HOLDER BRACKET The Skipper sign holder bracket is injection moulded from durable ABS plastic. It attaches to the top of the Skipper cap with a single screw and nyloc nut (supplied). Mounting of the bracket requires a 5mm hole to be drilled into the top of the Skipper cap. Once installed the bracket accommodates A4 or A5 sign holders listed below. Skipper sign holder bracket attches to top of skipper cap with a single screw & nyloc nut.
SKIPPER SIGNS Available in A4 or A5 sizes these sign holders attach directly to the sign bracket with the screws supplied and are designed to take laser printed or laminated paper signs. They can be viewed from both sides. PART No.
DESCRIPTION
SSHB
Skipper sign holder bracket
NSH-A4
A4 sign holder assembly
NSH-A5
A5 sign holder assembly
Skipper A4 sign holder assembly (NSH-A4).
Skipper sign holder bracket (SSHB).
SKIPPER LIGHT A multi function LED warning light that is fully rechargeable. Powered by 6 AA Batteries (not included), it is switchable between permanent or flashing mode. It also has a light sensor for automatic low light activation, which can be turned off. The light unit simply replaces the top housing cap on your existing Skipper for a fully integrated design. Reflective side panels assist low light visibility. (Light and Skipper sold separately).
PART No.
DESCRIPTION
SKLIGHT
Skipper multi function light (Amber)
Reflective surfaces.
Sensor & flash switches.
Skipper multi-function light (SKLIGHT).
STANDARD TAPES Our standard Skipper tapes are all manufactured from a durable, dip coated, woven polyester fabric and are virtually unrippable. They are available in diagonal Red/White or Black/Yellow stripes.
CUSTOM TAPES Made to the same specifications as our standard tapes. These are available in up to 4 colours for logos, promotions or warning messages. Minimum quantities and additional costs will apply. Lead times of 4 to 6 weeks apply.
105 SECTION
08 PART No.
DESCRIPTION
SKBELT-BY SKBELT-RW
Skipper replacement belt – Black/Yellow Skipper replacement belt – Red/White
PEDESTRIAN CONTROL
Standard tapes.
Custom printed tapes – price on application.
Copyright © 2012 Barrier Group Pty. Ltd.
SECTION
09
ZONE FENCING
De-fence is designed to comply with AS4024.1 when used as machinery guarding. Alternatively, its flexible design lends itself to many applications, including forklift separation and workplace zoning. De-fence can be configured in two standard heights. All panels have the ability to swing through 180°. Any fixed panel can be converted to a gate or vice versa simply by deleting or adding brackets. Sliding gates are now available for use with 2460mm high posts. This section also includes portable temporary fences.
You may also be interested in pages: 36
POST & RAIL
39
POST-Q
81
EXPANDING BARRIERS
102
RETRACTA-BELT
DE-FENCE FEATURES
Four-way connectivity
Tamper resistant fixings
The Steel posts accept panel brackets on all 4 sides. This makes them ideal for multisided enclosures or changes in direction.
In keeping with the requirements of AS4024.1 (Machinery Guarding) panels are retained in place with tamper resistant fixings. This means they can only be removed or adjusted using tools not normally available to operators.
Modular construction
Swinging or sliding gates
De-fence is a completely modular design. All the components including posts, brackets and panels are interchangeable to provide a zoning system that can be configured to any situation.
With De-fence any fixed panel becomes a gate simply by removing the panel brackets from one side and pivoting on the other, left hand or right hand. A choice of latch systems completes the gate.
107 ZONE FENCING
Copyright © 2012 Barrier Group Pty. Ltd.
SECTION
09
DE-FENCE SAFETY FENCE – The De-fence System De-fence is a modular guarding and fencing system. Designed to comply with AS4024.1. De-fence is simple to install, flexible and configures to the widest range of applications. The system comprises a range of standard panel lengths from 500 to 2000mm with the option of welded mesh or polycarbonate infill, plus a choice of two post heights.
Steel Posts De-fence steel posts are manufactured from 75 x 75 x 2.5mm thick RHS tube. They are pre-drilled on all 4 sides to accept our range of steel brackets and finished in high visibility safety yellow powder coat. Available in two standard heights, 1300 and 2460mm with welded bases.
De-fence as pedestrian separation.
Specifications: Description:
Pre-drilled SHS posts.
Material:
75 x 75 x 2.5mm SHS.
Finish:
Yellow powder coat.
Height:
1300 or 2460mm.
Width:
75 x 75mm.
Foot print:
200 x 84mm.
Weight:
1300mm – 7.4kgs. 2460mm – 12.0kgs.
Installation:
2 off M10 x 75mm concrete screw anchors. (Supplied).
PART No.
DESCRIPTION
DFP1300
De-fence steel post 1300 x 75 x 75mm with fixings
DFP2460
De-fence steel post 2460 x 75 x 75mm with fixings
Steel Brackets A range of four mounting brackets for connecting panels and our steel posts.
Specifications:
108 SECTION
09
Description:
Panel to post connecting brackets. (4 types).
Material:
4mm mild steel.
Finish:
Black powder coat.
Weight:
Approx. 300grams.
Installation:
2 off M8 x 12mm Hex, tamper resistant head bolts with washers (supplied).
PART No.
DESCRIPTION
DF-SPB
De-fence standard panel steel bracket kit
DF-APB
De-fence adjustable panel steel bracket kit
DF-PCB
De-fence panel connector steel bracket kit
DF-SGB
De-fence self-closing gate steel bracket kit
DF-CP
De-fence panel connector pin
ZONE FENCING
Steel post with welded steel base.
DF-SPB
DF-APB
Standard panel bracket kit This bracket provides universal panel mounting where no side adjustment is required.
Adjustable panel bracket kit Use in place of DF-SPB where side adjustment is required. Allows for up to 12mm of adjustment.
DF-PCB
DF-SGB
Panel connector bracket kit Used on double De-fence for joining upper and lower panels.
Self-closing gate bracket kit Use as either the top or bottom gate hinge. Allows tension adjustment for gate closure. (Use only 1 per gate.)
Copyright © 2012 Barrier Group Pty. Ltd.
DE-FENCE PANELS Mesh In-fill Panel The standard De-fence panels are available in 5 standard widths and come with fully welded mesh in-fill. The mesh is a 3mm diameter steel wire at 25 x 25mm centres, giving an aperture size of 22mm square. It is welded into a tubular frame of 38 x 25 x 1.6mm mild steel RHS. The completed panels are finished in black powder coat.
Specifications: Description:
Mesh in-fill panels.
Frame:
Mild steel tube 38 x 25 x 1.6mm.
In-fill:
3mm mild steel wire.
Aperture:
22 x 22mm.
Finish:
Black powder coat.
Weight:
See below.
PART No.
DESCRIPTION
DFP2000M
De-fence mesh in-fill panel – 2000mm long (18kgs)
DFP1500M
De-fence mesh in-fill panel – 1500mm long (15kgs)
DFP1000M
De-fence mesh in-fill panel – 1000mm long (10kgs)
DFP750M
De-fence mesh in-fill panel – 750mm long (8kgs)
DFP500M
De-fence mesh in-fill panel – 500mm long (6kgs)
Fully welded mesh panel.
3mm thick clear polycarbonate Polycarbonate In-fill Panel Optional polycarbonate De-fence panels are available in the same 5 standard widths. The clear polycarbonate is 3mm thick and is shatter proof. The polycarbonate sheet is fixed into a black powder coated tubular frame of 38 x 25 x 1.6mm mild steel RHS using a custom made aluminium extrusion. This extrusion is then riveted into the frame.
Polycarbonate panels with aluminium retaining extrusion.
Specifications: Description:
Polycarbonate in-fill panels.
Frame:
Steel.
Extrusion:
Aluminium.
In-fill:
3mm clear polycarbonate sheet.
Finish:
Outer steel frame, black powder coat.
Weight:
See below.
PART No.
DESCRIPTION
DFP2000P
De-fence polycarb. in-fill panel – 2000mm long (18kgs)
DFP1500P
De-fence polycarb. in-fill panel – 1500mm long (15kgs)
DFP1000P
De-fence polycarb. in-fill panel – 1000mm long (10kgs)
DFP750P
De-fence polycarb. in-fill panel – 750mm long (8kgs)
DFP500P
De-fence polycarb. in-fill panel – 500mm long (6kgs)
Standard Panel Sizes Standard range of panels sizes available – 500, 750, 1000, 1500 and 2000mm wide by 1150mm deep. (Note: Panel widths relate to actual post centres). Available in either mesh or polycarbonate in-fills. When used with 2460mm posts, two panels are stacked on top of one another.
ZONE FENCING
Panel sizes are actually measured between post centres.
Copyright © 2012 Barrier Group Pty. Ltd.
109 SECTION
09
DE-FENCE GATES Swing Gates With De-fence any fixed panel becomes a gate simply by removing the panel brackets from one side and pivoting on the other, left hand or right hand. A choice of latch systems completes the gate.
180° Swing Our unique bushing system means panels can swing through more than 180º. This feature allows panels to come off the posts at any angle. With all connections being bushed there is no rattling or noisy panels.
Sliding Gates
Single height swinging gates.
We understand that there are situations where available space, or the uniqueness of the application does not lend itself to swinging gates. For these scenarios we have developed a system of sliding gates using our standard mesh or polycarbonate panels and 2460mm high posts. In most cases these can be retro-fitted using specially designed brackets or they can be tailored to specific needs. Sliding gates can span openings from 260mm to 3.6 metres with a head clearance of 2.4 metres. Rolling on 4 wheel carriages with nylon wheels they are both silent and smooth in operation. Because our gates are suspended from overhead tracks the floor is kept free of any obstructions that could interfere with the use of pallet trucks, trolley’s or create tripping hazards.
Other features of our sliding gates include:
Double height swinging gates
Left or right opening or both in the case of double width gates. They can be mounted the inside or outside face of the fence posts. They can be either full height (2400mm) or top panel opening only (above 1200mm). For more information on sliding gates please talk to one of our customer service personal.
PART No.
DESCRIPTION
DF-CP
De-fence gate connector pin
DF-CP
DF-GS
DF-GS
De-fence gate stop
DF-LL
De-fence general purpose gate latch.
DF-LB
De-fence lockable drop bolt.
Gate Connector Pin Connects top and bottom panel when using a gate.
Gate Stop Non-latching gate stop for use with self closing gates.
DF-LL
DF-LB
General Purpose Gate Latch Lockable and self latching.
Lockable Drop Bolt Key lockable.
AS4024.1 SAFETY OF MACHINERY
110 SECTION
09
Our ‘De-fence’ machinery guarding system has been designed to comply with AS4024.1 Some key features of the De-fence system are: • When used at its full height of 2410mm ‘De-fence’ exceeds the standard. (The industry norm is only 2000mm) • Clearance below the panels is 100mm which allows for cleaning but prevents unauthorised access. • Panels in the system can only be removed or adjusted using tools not normally available to operators. • Panel mesh aperture is 22 x 22mm meaning ‘De-fence’ can be located at the minimum 120mm from a hazard.
ZONE FENCING
Copyright © 2012 Barrier Group Pty. Ltd.
EVENT FENCE
SIDE VIEW 2200mm
Event Fence portable barrier is a system of interlocking free standing fence panels. Strength, durability and flexibility are all features of Event Fence! Simply link Event Fence panels together to create continuous barricading for festivals, parades, sporting events or work sites.
200mm
1100mm
Optional forklift stillage makes storage and transporting of Event fence panels simple and efficient.
245mm
Value features: Fully welded steel construction. Galvanised finish. Panels nest together when not in use to reduce storage space. Feet are removable if desired for freight or storage. Vertical bars eliminate climbing points. Panels are able to pivot at joins. Low profile feet reduces tripping hazards.
490mm END VIEW
25mm dia. x 1.5mm
16mm dia. x 1.2mm
60mm
Specifications: Description:
Modular and portable temporary barrier system.
Material:
Steel construction, fully welded.
Finish:
Hot dip galvanised.
Length:
2200mm.
Width:
490mm.
Height:
1100mm.
Weight:
16kgs.
Installation:
Free standing panels, link together. No tools required.
HANDY TIP PART No.
DESCRIPTION
EF25/200
Event fence – standard duty
EFS
Event fence stackable forklift stillage – holds 30
Buyers considering purchasing Event Fence or Q-Fence should also consider our EFS & QFS stackable forklift stillages. These stillages make the storage and handling of panels much more space efficient and easier to handle.
EVENT FENCE STILLAGES Optional fork lift stillages make the storage, handling and transportation of large numbers of Event Fence panels simple and efficient. These robust hot dip galvanised steel stillages hold either 30 pieces of the EF25/200 standard duty event fence panels or QFS holds 20 Crowd-Q Panels.
Value features: Robust construction with galvanised finish. Designed for use with forklifts. Stackable to 4 units high. Each unit holds up to 30 Event Fence panels or 20 Q-Fence panels. Panels can be hand loaded by one person. PART No.
DESCRIPTION
EFS
Event fence stackable forklift stillage – holds 30
QFS
Q-Fence stackable forklift stillage – holds 20
ZONE FENCING
QFS/EFS – Stillages make storage and handling of panels simple and space efficient.
Copyright © 2012 Barrier Group Pty. Ltd.
111 SECTION
09
CROWD-Q Crowd-Q is a system of portable interlocking free standing fence panels for crowd management. Crowd-Q is manufactured from super tough and light weight moulded polyethylene in hi-visibility safety orange. Maximum panel openings of 80mm ensure small children are unable to climb through or under. Other features include stacking dimples, built-in reflective panels and low profile feet that rotate for transport or stacking. Panels link together to create continuous barricading for festivals, parades, sporting events and work sites. Optional forklift stillages holding up to 20 Crowd-Q panels makes handling and transporting simple and efficient.
Value features:
The lightweight, durable panels with recessed reflective panel is easily handled by one person.
Child safe 80mm panel openings. Low profile rotating feet with fixing holes. Super tough polyethylene in hi-vis orange. Light weight for ease of handling. Sliding panel connector for sloping ground. Built-in reflective panels.
Specifications Description:
Portable interlocking crowd control system.
Material:
Moulded polyethylene.
Finish:
Solid colour hi-vis safety orange.
Height:
1000mm.
Length:
2130mm.
Thickness:
60mm.
Weight:
Approx. 14kgs per unit.
Installation:
Free standing, linked panels.
PART No.
DESCRIPTION
CQ2130
Crowd-Q portable event fence
QFS
Q-Fence stackable forklift stillage – holds 20
Rotating foot with fixing hole.
Sliding panel connector for uneven ground.
WARNING © Barrier Group Pty. Ltd. takes the protection of its intellectual property (IP) seriously and will not hesitate to pursue legal action against any individual, group or organization attempting to steal, copy or duplicate any of its proprietary designs OR anyone who imports, sells or distributes illegal copies or duplicates of its proprietary designs. IT’S AGAINST THE LAW – AVOID THE PAIN!
Q-fence stillages store 20 panels and stack easily with a forklift.
112 SECTION
09
ZONE FENCING
Copyright © 2012 Barrier Group Pty. Ltd.
Q-CADDY Schools, universities, sporting organisations. In fact anyone responsible for managing the movement of people or vehicles on private property will appreciate the convenience and versatility of Q-Caddy. Q-Caddy is a rapid deployment crowd barrier system comprising 20 of our Crowd-Q portable interlocking fence panels on a purpose designed lightweight trailer. The trailer is fully galvanised, has wide turf tyres to protect sensitive sporting fields, and a quick hitch coupling for typical grounds keepers vehicles such as utility carts and ride-on mowers. There is even a built-in cone carrier attachment that holds up to ten 70mm traffic cones. The Q-Caddy has been inspired by a need by many institutions and private bodies to provide short term traffic management such as at sports days, festivals, open days and numerous other events. Note: Q-Caddy ships flat packed and requires simple assembly using only basic hand tools (all fixings supplied).
Above: Lightweight towing. Right: Standard 50mm trailer coupling.
Value features: Time saving convenience and versatility. Easily towed by typical grounds keepers vehicles. Quick hitch with low drawbar weight (approx. 20kgs). Carries 20 lightweight Crowd-Q panels (14kgs each). Built-in cone carrier for up to 10 traffic cones. Fitted with a standard 50mm trailer coupling. Wide turf tyres to protect playing surfaces Hot dip galvanised steel construction.
Specifications Description:
Portable barrier system.
Material:
Tubular steel construction.
Finish:
Hot dip galvanised.
Height:
Approx. 1500mm (loaded).
Length:
3200mm overall (loaded).
Weight:
150kgs approx. (empty).
Capacity:
20 Crowd-Q panels.
PART No.
DESCRIPTION
QCAD-20
Q-Caddy trailer complete with 20 panels
QCAD-T
Q-Caddy trailer only
QCAD-W
Q-Caddy replacement wheel
CQ2130
Crowd-Q additional panels
BTC450R
Fluoro cone with reflective sleeve 450mm
BTC700R
Fluoro cone with reflective sleeve 700mm
Above: Quick and easy loading and unloading. Right: Built-in cone carrier.
WARNING TOWING HAZARD: – The Q-Caddy mobile barrier system is designed and intended for towing on private land only and should never be towed on public roads or highways. – The Q-Caddy mobile barrier should not be towed at speeds exceeding 25km per hour. – Drive safely. Be aware of the added length of the Q-Caddy trailer. – Never ride or transport cargo on the Q-Caddy trailer.
113
Q-Caddy holds 20 Crowd-Q panels.
ZONE FENCING
Copyright © 2012 Barrier Group Pty. Ltd.
SECTION
09
ZEPHYR “A soft or gentle breeze” In a busy city ‘zephyr’ is a stunning short or long term bicycle storage solution. Incorporate it into a cutting edge architectural design and it becomes a sculptured bollard, a classic design element. In the town square or park it’s a gathering point, a place to stop, to chat, to bide a while with friends. Or then again, is it simply a beautiful piece of public sculpture, one that invites you to run your hands over its sumptuous metallic form, its smooth and generous curves?
Feel the breeze! ZEAL “Added interest, flavour or charm” What are these strange gleaming shapes seemingly balancing on end like giant tuning forks? Organised beauty! Smooth curves and an upright parallel stance gives zeal an air of efficiency. The compact design provides an economy of space required for situations that need to cope with the business end of bicycle storage, while the choice of materials ensures that it will look great in any company for a very long time.
Extreme bicycle storage! ZIGZAG “Characterised by sharp turns” Gone is the boredom associated with conventional bicycle storage systems. Characterised by sharp turns in alternating directions zigzag offers complete freedom of design. You are in control, twist and torture it’s adjustable limbs, explore the possibilities, get in touch with your creative side, and then when you’re satisfied, lock it in. Is it simply a bespoke bicycle rack you seek, or is it more, a barrier, a sculpture, an expression?
Where form and function collide!
Specifications Overall height: Overall width: Weight: Material: Finish:
825mm 320 x 225mm 25kgs Cast aluminium To be confirmed
Specifications Overall height: Tube diameter: Overall width: Material: Finish:
750mm 60mm x 2.5mm wall 450 x 270mm Stainless steel 316 Polished
Specifications Overall height: Tube diameter: Material: Finish:
750mm 60mm x 2.5mm wall Stainless steel 316 Polished
INDEX A-B-C Airport Barriers Aisle Closures Anti-Fatigue Mats Anti-Slip Products Ball Fence Belt Barriers Belt Stanchions Bike Rails/Racks Blade Runner Road Spikes Bollards Bollard Protection Sleeves Bollards Collapsible Fixed Flexible Fold-Down Knock Down Removable – Key Lock Removable – Padlock Removable – Surface Mounted Retractable Shock Absorbing Stainless Steel T-Top Bull-Dog Brackets Bumpa-Bar Single Rail Double Rail Cable Protectors Cam-Lok Removable Bollards Car Space Protector Centurian Bollards Chain – Plastic Channel Rail Clearance Bars Collapsible Cones Column Protector Column Sentry Compliance Speed Hump Compliance Wheel Stop Cone Bar Cones – Traffic Convex Mirrors Corner Protectors Crash Barrier Crowd Control – Rope Crowd Control – Stanchions Crowd-Q Temp Fencing
SECTION
PAGE
8 8 4 4 3 8 8 6 6 1 1
87 82, 102 54 46 32 87, 102 90-92 74 72 3 5
1 1 6 1 6 1 1 1 1 1 1 6 4
8, 15 3-6 77-78 8 78 10, 11 12, 13 14 15 7 3 76 51
2 2 6 1 6 1 4, 8 3 6 6 2 2 5 6 6 6 4 2 2 8 8 9
22 23 70-71 10, 11 70 3-6 54, 100 38 75 76-77 28-30 30 56-57 66-67 77 76-77 44-45 26 22-25 100 87-97 112
9 4 2 4 8 5 3
106-110 50 26-27 44 92 62 37
D-E-F De-Fence Protective Fencing Dock-Safe-Q Loading Dock Barrier Docking Bumpers Dome Mirrors Econo-Line Economy Rubber Speed Humps Econo-Rail
Event Fence Expanding Barriers Extendable Stand-off Arm (mirrors) Fences Ball Fence De-Fence Econo-Rail Event Fixed Impact Absorbing Post-Q Q-Caddy Fence & Trailer Menni-Q Post And Rail Temporary Fixed Bollards Flexible Bollards Floor Mats Fold-Down Bollards Folding Pallet Fork-Lift Separation Fork-Lift Speed Control
SECTION
PAGE
9 7 4
111 81-86 44
3 9 3 9 2, 3 3 3 9 3 3 9 1 6 4 1 4, 9 3 5
32-34 106-110 37 111 32-42 40 39 113 40 36 111 3-6 17 54 8 53, 111 31-42 62
3 9 2 3 6 8 1 2 4, 6
33 110 22-25 32-42 75 80 7 25 45, 80
6 6 6 6 1
79 77-78 80 70 18
9 8 6 4 2 2 3 4 9 4 9 4, 6
106-110 102 80 54 20, 27 20, 34 40 51 106-110 53 106-110 44-45, 80
G-H-I Gates – Ball-Fence Gates – Zone Fencing Guard Rail Hand Rail Height Bars And Accessories Illuminated Batons Impact Absorbing Bollards Impact Absorbing Guard Rail Inspection Mirrors
J-K-L Kerb Ramp Knock Down Bollards Led Portable Light – Baton Lok-Up (Car Space Protector) Lca Of Wheel Stop
M-N-O Machinery Guarding Magna Mount Retracta-Belt Marking Dots Mats – Anti Fatigue Menni Menni – Asset Protection Menni-Q Fixed Predestrian Fence Menni – Racking End Protector Mesh Fencing Mesh Storage Cage Mesh Wall Systems Mirrors
Copyright © 2012 Barrier Group Pty. Ltd.
INDEX SECTION Modular Wire Shelving 4 Neata Queue Managament System 8 One Way Road Spikes 6
PAGE 52 87-101 72
P-Q-R
Pallet Racking Protectors 4 Park Sentry 2 Parking Space Protection 6 Pedestrian Barriers 3 Pedestrian Barriers 7, 8, 9 Pedestrian Control 8 Pedestrian Separation 3 Plastic Bollards 6 Plastic Chain 8 Plastic Speed Hump 5 Plastic Wheel Stops 6 Port-A-Guard 7 Post And Rail – Heavy Duty 3 Post And Rope Systems 8 Post-Q Fixed Pedestrian Fence 3 Q-Caddy Fence & Trailer 9 Queue Management 8 Racking Protection 4 Ram Raid Bollards 1 Reflective Cones 6 Reflective Tape 4 Removable Bollards Key Locking 1 Padlock Type 1 Surface Mount 1 Removable Fencing 3 Removable Fencing 8 Retractable Belt Barriers And Accessories 8 Retractable Belt Barriers And Accessories 8 Retractable Belt Barriers And Accessories 8 Retractable Bollards 1 Road Spikes – One Way 6 Rope Barrier 8 Rubber Wheelstop 6 Rumble Strip 5
51 28-30 70 32-42 81-113 87-105 31-42 76-78 54, 100 56-57 65-66 81-86 36 94-95 39 113 87-105 51 10-13 76 54 10-11 12-13 14 39-40 88, 92 90-92 99 102-103 15 72 94-95 68 64
S
Safety Barriers 3 Safety Barriers 9 Safety Cones 6 Safety Fencing/Guarding 9 Safety Guard Rail 3 Safety Mats 4 Safety Mirrors 4 Safety Mirrors 6 Safety Products 4 Scorpion Wheel Clamp 6 Security Mirrors 6 Shelving 4 Shock Absorbing Bollards 1
31-42 106-113 76 106-110 22-25 54 44-45 80 43-54 73 44-45 52 7
SECTION Shock Absorbing Guard Rails 2 Skipper 8 Sleeve-Lok Bollards 1 Slo-Motion Speed Humps 5 Speed Bumps 5 Speed Cushion 5 Speed Humps Compliance 5 Sign Kit 5 Plastic 5 Rubber 5 Steel 5 Stair Nosing 4 Stanchions 8 Storage 4, 9 Storage Cage 4
PAGE 25 103-105 12, 13 55-59 55-64 63 55-57 58 55-57 62-63 58-59 47 90-97 52, 111 53
T-U-V
T Top Bollards 6 Tape Barriers - Retractable 8 Tapes – Anti-Slip 4 Tapes – Reflective 4 Tee-Lok Removable Bollard 1 Telescopic Mounting Arm 4 Temporary Fences – Event Fence 9 Temporary Fences – Crowd-Q 9 Traffic Batons 6 Traffic Calming 5 Traffic Cones 6 Trailer – Q-Caddy 9 Trolley (Neata) 8 Tubular Fencing 3 Two-Piece Knock Down Bollard 6 U-Bars 2, 3 Vehicle Barriers 3 Vehicle Barriers 6 Vehicle And Parking 6
76 90-92 46 54 14 45 111 112 80 62 76-77 113 100 32 78 24, 35 31-42 65-80 65-80
W-X-Y-Z
Wall Mounted Barriers 7, 8 Wheel Chocks 6 Wheel Clamps 6 Wheel Stops 6 Wire Shelving 4 Workplace Safety 4 Zone Fencing 9
82, 102 78 73 67-68 52 43-54 106-113
Copyright © 2012 Barrier Group Pty. Ltd.
LEGEND PROPRIETORY DESIGN This product has been fully designed and developed by Barrier Group. It is a proprietory product of Barrier Group Pty. Ltd. and protected by copyright.
FREE END OF LIFE RECYCLING Return this product to Barrier Group for free recycling rather than dumping into landfill.
NEW AND UNIQUE
www.thomasjacobs.com.au
This is a new and unique product. It has either been designed, developed and manufactured by the Barrier Group Pty. Ltd. or it is being seen here for the first time.
Copyright
100% RECYCLABLE
© 2012 Barrier Group Pty. Ltd. A.B.N. 56 007 271 365 The entire contents of this catalogue are protected by copyright. No part of this publication may be reproduced or transmitted without the written permission of Barrier Group Pty. Ltd. All rights reserved.
This product is manufactured from virgin grade raw materials and is 100% recyclable using existing, readily available recycling technology and services.
Product variations In line with our policy of constant product improvement, some products supplied may vary slightly from those depicted in this catalogue.
Branding and use of intellectual property (IP) The Barrier brand is well known and respected throughout Australia and is a valuable and powerful marketing tool. The intellectual property (IP) incorporated in Barrier’s products, marketing materials and its brands are valuable assets that Barrier allows to be used under strict conditions. It must only ever be used for the application as granted and always with the permission of Barrier Group Pty. Ltd. Barrier views rebranding of its’ products or ‘passing off’ (using our IP to sell a competitor’s product) as very serious matters, which will terminate any arrangement to supply Barrier products. This needs to be clearly understood and adhered to by any potential distributor or reseller.
ED
C
L YC
RE
RECYCLED MATERIALS This product has been manufactured from either a combination of recycled materials and virgin grade materials or entirely from recycled materials.
HOT DIP GALVANISED This product has been hot dip galvanised prior to any surface coatings being applied. Hot dip galvanised offers vastly improved corrosion protection and extended life in harsh environments.
Warranty “Barrier Group Pty. Ltd. (Barrier) goods are sold with the understanding that the buyers will test them in actual use and determine for themselves the suitability for their intended use. Barrier warrants to the buyer that its products are free from defects in materials and workmanship, but limits its obligation under this warranty to replacement of the product provided Barrier is satisfied the product has been defective at the time Barrier sold it. This warranty does not extend to any persons obtaining the product from the buyer. This warranty is in lieu of any other warranty, express or implied, including, but not limited, to, any implied warranty or merchant or ability or fitness for a particular purpose, and of any other obligations or liability on Barrier’s part. Under no circumstances will Barrier be liable for any loss, damage, expense or consequential damages of any kind arising in connection with the use, installation, or inability to use or install, Barrier products.”
14 Day Return / Refund Policy We offer a 14 day money back refund on all our products (excluding custom made products). If you are not happy with your purchase and return it in the original condition within 14 days after receipt, your money (less an $100 handling/restocking fee) will be refunded. Note: that costs of return shipping are paid by you, the customer.
Version 8
FIXINGS INCLUDED This product comes complete with all the necessary fixings to complete the standard installation. When comparing competitors prices against our own, always ensure they have included the fixings with the product (excludes gravel spikes).
WARNING © Barrier Group Pty. Ltd. takes the protection of its intellectual property (IP) seriously and will not hesitate to pursue legal action against any individual, group or organization attempting to steal, copy or duplicate any of its proprietary designs OR anyone who imports, sells or distributes illegal copies or duplicates of its proprietary designs. IT’S AGAINST THE LAW – AVOID THE PAIN!
THOMAS JACOBS PTY. LTD. A.B.N. 42 967 601 180
PO Box 786, Port Melbourne, Victoria, Australia 3207. Phone: (03) 9676 2200 Email: sales@thomasjacobs.com.au
www.thomasjacobs.com.au
Innovative Solutions