2CM PORCELAIN PAVERS
ABOUT 2CM PORCELAIN PAVERS
2
APPLICATIONS: DIFFERENT METHODS
4
PROFILITEC
5
ADVANTAGES OF ELEVATED FLOORS
7
COLLECTIONS: MAS DE PROVENCE 2CM
8
WATERFALL 2CM
10
AXIS 2CM
12
PRIME STONE 2CM
14
URBAN NATURE 2CM
16
EXTREME 2CM
18
BOHEMIAN 2CM
20
CARPET 2CM
22
STUDIO 2CM
24
NATIVE 2CM
26
ABOUT 2CM PORCELAIN PAVERS 1. CHARACTERISTICS 2CM Porcelain is specifically designed for outdoor use. Its high resistance to breaking load and stress, as well as its extraordinary slip-resistant features, make it ideal for outdoor areas, both public and private. UNLIMITED DURABILITY • • • •
High resistance to chemical and atmospheric agents Frost resistant and fireproof Not affected by moss or insects Easy to maintain and clean
2. ADVANTAGES 2CM Porcelain offers many advantages compared to natural stone and concrete materials that have traditionally been used outdoors. COMPARED TO OTHER MATERIALS • • • • • • • • • •
2
Does not absorb water Resistant to chemical attacks Resistant to salt used for melting ice Not affected by mould or moss Comes perfectly calibrated with uniform thickness Remains unaltered over time Allows for a better aesthetic development Enables continuity of the same flooring from inside to out, with matching indoor tile Easy to clean and non-absorbent Weighs less than concrete and natural stone alternatives because it is not as thick, making it easier to handle, while maintaining a high resistance to breaking load
3. WHERE Its extraordinary technical characteristics, easy installation and sophisticated design mean that 2CM Porcelain can be applied in practically any exterior or interior space. The sky is the limit. RESIDENTIAL • G ardens
• Terraces • Passageways
• Courtyards
• Walls
• Stairs
• Pools
PUBLIC SPACES • Hotels (communal areas, pools, terraces, etc.) • Spas • Rooftop patios • Industrial areas • Urban paving • Beaches (over sand) • Driveways
3
APPLICATIONS: DIFFERENT METHODS DRY INSTALLATION ON GRASS • Easy to lay, adjust or move • Ideal solution for public parks or private gardens
DRY INSTALLATION ON SAND/GRAVEL • Easy to lay, adjust or move • Aesthetic features ideal for enhancing contemporary buildings
DRY INSTALLATION ON SCREED WITH ADHESIVE • Driveway paving • Matching interior and exterior areas
ELEVATED FLOOR INSTALLATION (ON AN ADJUSTABLE SUPPORT) • Can be easily removed, inspected and reused • Available for different kinds of support • Ideal for hiding wires and pipes, while keeping them easily accessible
4
PROFILITEC
SUPAL LOW PEDESTAL 1-3/32" รท 1-11/16"
SUPAR MODULAR RING + 1-3/16"
SUPA2 PEDESTAL HEAD 3/32"
5
PROFILITEC ADVANTAGES AND FUNCTIONS 3 IN 1 CONFIGURATION
3 SKUS for all configurations.
Removable and switchable tabs.
FIXED OR SELF-LEVELING HEAD
Simple switch mechanism between fixed and self-leveling heads.
6
Self-leveling head to reach up to 5% slope.
FLEXIBLE HEIGHT
Height adjustable pedestal.
Simply add or remove SUPAR ring to increase or decrease pedestal height.
TAB ADVANTAGES
Switch tabs for standard installation or for wood or aluminum joists.
Tabs with sound dampening rubber.
PRODUCT AND STOCK ADVANTAGES
3 FUNCTION KEY
Full system with only 3 SKUs.
1) Adjustable height 2) Switch from fix to self-levelling head 3) Remove tabs
Optimizing inventory space management and investment.
ADVANTAGES OF ELEVATED FLOORS
GREAT FOR HIDING PIPES AND WIRES The gap between the floor and the membrane below allow for the passage of pipes and wires that are hidden yet easily accessible.
HIGH RESISTANCE TO LOADS The robust structure of the pedestal as well as to the continuous thread, guarantees a strong, safe and longlasting product.
BETTER THERMAL INSULATION The gap between the floor and the membrane below favours a constant flow of air which improves the lifetime of the waterproofing membrane as well as thermal insulation.
FLAT & EASILY ACCESIBLE FLOORING The elevated system compensates for small differences and slopes of the substrate creating a stable and flat paved surface and, where necessary, with the required slope, for better water drainage. In the case of installation on waterproofing membrane, the membrane is easily accessible and inspectable, as the flooring is simply placed on the pedestals.
BETTER ACOUSTIC INSULATION
SIGNIFICANT WEIGHT REDUCTION
Thanks to its anti-slip and antinoise head, the adjustable pedestal is able to reduce the sound level to 25dB.
By eliminating the cement screed, the elevated system substantially reduces the weight on the structure and reduces costs.
EXCELLENT COMPRESSION & EXPANSION ABSORPTION CHARACTERISTICS The decoupling of the flooring and the supporting elements assists the absorption of the structural movements and expansion.
RAPID DRAINING OF WATER The small joint between the tiles, allows for a quick run-off of the water, that is then drained through the slope of the floor base below. So as to optimal draining of the the elevated floor it is important to prepare the necessary slopes during installation. It is important to note that porcelain tiles have extremely low water absorption rates and are therefore completely frost resistant.
7
MAS DE PROVENCE 2CM
8
CLOUD 18"x36" 36” x 36”
IVORY 18"x36" 36” x 36”
ECRU 18"x36" 36” x 36”
COAL 18"x36" 36” x 36”
MAS DE PROVENCE 2CM
TEST
STANDARD USED
MIN. REQUIREMENTS RESULTS
Water absorption
ISO 10545-3
< 0.5%
≤ 0.5%
Slip Resistance
ANSI A 137.1:2012
> 0.42
Breaking Strength
ISO 10545-4
DCOF Ű 0.42 > 1300N
9419 N
Modulus of Rupture
ISO 10545-4
> 35N/mm²
40 ÷ 55 N/mm²
Abrasion Resistance
IS0 10545-7
--
PEI IV
Chemical Resistance
ISO 10545-13
min.UB
RESISTANT
Frost Resistance
ISO 10545-12
REQUIRED
RESISTANT
Stain Resistance
ISO 10545-14
> CLASS 3
RESISTANT
Shade Variation
--
--
V2
Country of Origin
--
--
ITALY
Material
--
--
Porcelain
Thickness
--
--
20mm
9
WATERFALL 2CM
IVORY FLOW 24" x 24" 18” x 36” *
GRAY FLOW 24" x 24" 18” x 36” *
SILVER FLOW 24" x 24" 18” x 36” *
DARK FLOW 24" x 24" 18” x 36” *
COSTA TORO ANGOLARE DX 12" x 36"
COSTA TORO ANGOLARE SX 12" x 36"
COSTA TORO 12" x 36"
COSTA TORO GRIP 12" x 36"
COSTA RETTA 12" x 36"
COSTA RETTA GRIP 12" x 36"
COSTA RETTA ANGOLARE DX 12" x 36"
COSTA RETTA ANGOLARE SX 12" x 36" * SPECIAL ORDER
10
WATERFALL 2CM
TEST
STANDARD USED
MIN. REQUIREMENTS RESULTS
Water absorption
ISO 10545-3
< 0.5%
0.05%
Slip Resistance
ANSI A 137.1:2012
Breaking Strength
ISO 10545-4
DCOF Ű 0.42 > 1300N
Ű 0.42 13,600N
Modulus of Rupture
ISO 10545-4
> 35N/mm²
Abrasion Resistance
IS0 10545-6
ů 175mm³
Ű 50N mm² 145mm³
Chemical Resistance
ISO 10545-13
min.UB
UA, ULA, UHA
Frost Resistance
ISO 10545-12
REQUIRED
RESISTANT
Stain Resistance
ISO 10545-14
> CLASS 3
CLASS 5
Shade Variation
--
--
V3
Country of Origin
--
--
ITALY
Material
--
--
Unglazed Porcelain
Thickness
--
--
20mm
11
AXIS 2CM
WHITE 24” x 24” *
CREAM 24” x 24”
GREY 24” x 24”
BLACK 24” x 24” *
STEP SQUARED EDGE 24" x 24" x 1.18" 24" x 48" x 1.18"
STEP ROUNDED EDGE 8" x 48"
STEP SQUARED EDGE 8" x 48" x 1.18"
STEP SQUARED EDGE 8" x 48" x 6"
STEP ANGLE EXTERIOR SQUARED EDGE 8" x 48" x 1.18"
STEP ANGLE EXTERIOR ROUNDED EDGE 8" x 48"
STEP ANGLE INTERIOR SQUARED EDGE 8" x 48" x 1.18"
STEP ANGLE INTERIOR ROUNDED EDGE 8" x 48" * SPECIAL ORDER
12
AXIS 2CM
TEST
STANDARD USED
MIN. REQUIREMENTS RESULTS
Water absorption
ISO 10545-3
< 0.5%
< 0.2%
Slip Resistance
ANSI A 137.1:2012
0.61
Breaking Strength
ISO 10545-4
DCOF Ű 0.42 > 1300N
Modulus of Rupture
ISO 10545-4
> 35N/mm²
42N/mm²
Abrasion Resistance
IS0 10545-6
ů 175mm³
Chemical Resistance
ISO 10545-13
min.GB
ů 145mm³ GA, GLA, GHA
Frost Resistance
ISO 10545-12
REQUIRED
RESISTANT
Stain Resistance
ISO 10545-14
> CLASS 3
CLASS 5
Shade Variation
--
--
V3
Country of Origin
--
--
Spain
Material
--
--
Unglazed Porcelain
Thickness
--
--
20mm
11,430N
13
PRIME STONE 2CM
SAND 18” x 36”
SILVER 18” x 36”
14
GREIGE 18” x 36”
BLACK 18” x 36”
COSTA TORO ANGOLARE DX 12"x36"
COSTA TORO ANGOLARE SX 12"x36"
COSTA TORO 12"x36"
COSTA TORO GRIP 12"x36"
COSTA RETTA 12"x36"
COSTA RETTA GRIP 12"x36"
COSTA RETTA ANGOLARE DX 12"x36"
COSTA RETTA ANGOLARE SX 12"x36"
PRIME STONE 2CM
TEST
STANDARD USED
MIN. REQUIREMENTS RESULTS
Water absorption
ISO 10545-3
< 0.5%
≤ 0.05%
Slip Resistance
ANSI A 137.1:2012
Breaking Strength
ISO 10545-4
DCOFŰ 0.42 > 1300N
Ű 0.62 13,600N
Modulus of Rupture
ISO 10545-4
> 35N/mm²
> 50N/mm²
Abrasion Resistance
IS0 10545-6
ů 175mm³
≤ 145mm³
Chemical Resistance
ISO 10545-13
min.UB
UA, ULA, UHA
Frost Resistance
ISO 10545-12
REQUIRED
RESISTANT
Stain Resistance
ISO 10545-14
> CLASS 3
CLASS 5
Shade Variation
--
--
V2
Country of Origin
--
--
ITALY
Material
--
--
Unglazed Porcelain
Thickness
--
--
20mm
15
URBAN NATURE 2CM
CEMENT 24” x 24”
PORTLAND 24” x 24”
16
COSTA TORO ANGOLARE DX 12"x24"
COSTA TORO ANGOLARE SX 12"x24"
COSTA TORO 12"x24"
COSTA TORO GRIP 12"x24"
COSTA RETTA 12"x24"
COSTA RETTA GRIP 12"x24"
COSTA RETTA ANGOLARE DX 12"x24"
COSTA RETTA ANGOLARE SX 12"x24"
URBAN NATURE 2CM
TEST
STANDARD USED
MIN. REQUIREMENTS RESULTS
Water absorption
ISO 10545-3
< 0.5%
≤ 0.05%
Slip Resistance
ANSI A 137.1:2012
Breaking Strength
ISO 10545-4
DCOFŰ 0.42 > 1300N
Ű 0 62 13,600N
Modulus of Rupture
ISO 10545-4
> 35N/mm²
> 50N/mm²
Abrasion Resistance
IS0 10545-6
ů 175mm³
≤ 145mm³
Chemical Resistance
ISO 10545-13
min.UB
UA, ULA, UHA
Frost Resistance
ISO 10545-12
REQUIRED
RESISTANT
Stain Resistance
ISO 10545-14
> CLASS 3
CLASS 5
Shade Variation
--
--
V2
Country of Origin
--
--
ITALY
Material
--
--
Unglazed Porcelain
Thickness
--
--
20mm
17
EXTREME 2CM
BEIGE 24" x 24" * 18" x 36" *
GREY 24" x 24" * 18" x 36" *
ANTHRACITE 24" x 24" * 18" x 36" *
STEP TREAD 13" x 24" x 2"
CORNER STEP TREAD 13" x 24" x 2"
GLUED "L" TERMINAL 36" x 18" x 6" 24" x 8" x 2"
GLUED "L" TERMINAL 24" x 8" x 6"
GRID 6" x 24"
ANGLED GRID 6" x 24"
ANGLED GRID 6" x 24" * SPECIAL ORDER
18
EXTREME 2CM
TEST
STANDARD USED
MIN. REQUIREMENTS RESULTS
Water absorption
ISO 10545-3
< 0.5%
Slip Resistance
ANSI A 137.1:2012
Breaking Strength
ISO 10545-4
DCOF Ű 0.42 > 1300N
Modulus of Rupture
ISO 10545-4
> 35N/mm²
Abrasion Resistance
IS0 10545-6
ů 175mm³
Ű 45N mm² ů 145mm³
Chemical Resistance
ISO 10545-13
min.UB
GUARANTEED
Frost Resistance
ISO 10545-12
REQUIRED
RESISTANT
Stain Resistance
ISO 10545-14
> CLASS 3
GUARANTEED
Shade Variation
--
--
V3
Country of Origin
--
--
ITALY
Material
--
--
Unglazed Porcelain
Thickness
--
--
20mm
ů 0.1% > 0.42 > 10,000N
19
BOHEMIAN 2CM
SAND 20" x 40" *
BLEND 20" x 40" *
TIPO L 100 20" x 40"
TIPO L ANG 20" x 40"
GRID 10" x 40"
GRID 10" x 10"
BLUE 20" x 40" *
* SPECIAL ORDER
20
BOHEMIAN 2CM
TEST
STANDARD USED
MIN. REQUIREMENTS RESULTS
Water absorption
ISO 10545-3
< 0.5%
ů 0.2%
Slip Resistance
ANSI A 137.1:2012
≥0.42
Breaking Strength
ISO 10545-4
DCOF Ű 0.42 > 1300N
Modulus of Rupture
ISO 10545-4
> 35N/mm²
Abrasion Resistance
IS0 10545-7
Chemical Resistance
ISO 10545-13
min.UB
RESISTANT
Frost Resistance
ISO 10545-12
REQUIRED
RESISTANT
Stain Resistance
ISO 10545-14
> CLASS 3
RESISTANT
Shade Variation
--
--
V4
Country of Origin
--
--
SPAIN
Material
--
--
Porcelain
Thickness
--
--
20mm
> 2,300N
> 44N mm² PEI IV
21
CARPET 2CM
SAND 20" x 40" *
TIPO L 100 20" x 40"
TIPO L ANG 20" x 40"
GRID 10" x 40"
GRID 10" x 10"
VESTIGE 20" x 40" *
* SPECIAL ORDER
22
CARPET 2CM
TEST
STANDARD USED
MIN. REQUIREMENTS RESULTS
Water absorption
ISO 10545-3
< 0.5%
ů 0.2%
Slip Resistance
ANSI A 137.1:2012
Breaking Strength
ISO 10545-4
DCOF Ű 0.42 > 1300N
≥0.42 > 9000N
Modulus of Rupture
ISO 10545-4
> 35N/mm²
> 47N mm²
Abrasion Resistance
IS0 10545-7
--
PEI IV
Chemical Resistance
ISO 10545-13
min.UB
RESISTANT
Frost Resistance
ISO 10545-12
REQUIRED
RESISTANT
Stain Resistance
ISO 10545-14
> CLASS 3
RESISTANT
Shade Variation
--
--
V4
Country of Origin
--
--
SPAIN
Material
--
--
Porcelain
Thickness
--
--
20mm
23
STUDIO 2CM
IVORY 20" x 40" *
ANTHRACITE 20" x 40" *
GREY 20" x 40" *
TIPO L 100 20" x 40"
TIPO L ANG 20" x 40"
GRID 10" x 40"
GRID 10" x 10"
STAMP 20" x 40" *
* SPECIAL ORDER
24
STUDIO 2CM
TEST
STANDARD USED
MIN. REQUIREMENTS RESULTS
Water absorption
ISO 10545-3
< 0.5%
0.2 %
Slip Resistance
ANSI A 137.1:2012
Breaking Strength
ISO 10545-4
DCOF Ű 0.42 > 1300N
>0.42 >6000N
Modulus of Rupture
ISO 10545-4
> 35N/mm²
--
Abrasion Resistance
IS0 10545-7
--
PEI IV
Chemical Resistance
ISO 10545-13
min.UB
RESISTANT
Frost Resistance
ISO 10545-12
REQUIRED
RESISTANT
Stain Resistance
ISO 10545-14
> CLASS 3
RESISTANT
Shade Variation
--
--
SLIGHT VARIATION
Country of Origin
--
--
SPAIN
Material
--
--
Porcelain
Thickness
--
--
20mm
25
NATIVE 2CM
ELEMENTO L 6" x 36" x 2"
ASH 36” x 36” *
RED 36” x 36” *
GRIGLIA 7" x 36"
FOG 36” x 36” *
ANG. GRIGLIA SX | ANG. GRIGLIA DX 7" x 36"
* SPECIAL ORDER
26
NATIVE 2CM
TEST
STANDARD USED
MIN. REQUIREMENTS RESULTS
Water absorption
ISO 10545-3
< 0.5%
≤ 0.5%
Slip Resistance
ANSI A 137.1:2012
> 0.42 | R11
Breaking Strength
ISO 10545-4
DCOF Ű 0.42 > 1300N
Modulus of Rupture
ISO 10545-4
> 35N/mm²
>47 N/mm²
Abrasion Resistance
IS0 10545-7
--
PEI III - V
Chemical Resistance
ISO 10545-13
min.UB
RESISTANT
Frost Resistance
ISO 10545-12
REQUIRED
RESISTANT
Stain Resistance
ISO 10545-14
> CLASS 3
RESISTANT
Shade Variation
--
--
V2
Country of Origin
--
--
ITALY
Material
--
--
Porcelain
Thickness
--
--
20mm
--
27