Get the Best Inducer Motor Protection Did you just have a recent heating and cooling inspection and was told that you need to replace the draft inducer motor in your furnace? If so, it is wise to take your HVAC inducer motor contractor's advice since it could save your life. The draft inducer motor is a vital component in your furnace system, and should be repaired or replaced as soon as a problem is evident. Continue reading to learn why these components are so crucial, and how they can protect you and your family from carbon monoxide poisoning.
The Carrier draft inducer motor inside a furnace works by pulling heat and exhausts fumes through the heat exchanger, and then forces it out of the flue. A furnace cannot operate properly or safely for that matter, without a properlyworking draft inducer motor. A problem with this component can lead to a buildup of carbon monoxide gas since the furnace cannot efficiently eliminate the
toxic gases. So if your HVAC contractor tells you that your draft inducer motor is faulty, it is strongly encouraged to have it replaced as soon as possible because your furnace cannot be operation without it.
The draft inducer assembly is a key component part to the furnace system. It is the fan that pulls the exhaust fumes and heat through the heat exchanger and forces it out the flue. Without the HVAC inducer motor, your furnace will not run properly and can be a risk for carbon monoxide buildup. A Furnace electric actuator motor is a single-phase motor that is designed to efficiently move air and gasses out of the furnace and up through the heating vent pipes and also maintains clean and safe combustion. It has two blowers- one blower aims to cool the motor as it operates while the other pulls the heat from the burners, through the heat exchanger, and out to the vent pipes to deliver hot air into your home. It is a very crucial part of a furnace for without it the furnace will cease to perform the ignition process leaving your home in cold conditions.