Driver Training - Driver CPC

Driver CPC training

Enhancing safety, efficiency and economy behind the wheel

Driver CPC training with Scania With more than a quarter of a century's experience in providing driver training, Scania has the expertise in-depth to make your Driver CPC training as beneficial and worthwhile as possible.

What's more, our training is not restricted to drivers of Scania Large Goods Vehicles (LGV) and Passenger Carrying Vehicles (PCV); we offer a complete service covering all makes and types of commercial vehicles.

Why choose Scania for your training? ! Guaranteed quality, professionalism and attention to detail ! Fully approved by JAUPT, the Joint Approvals Unit for Periodic Training ! Wide national coverage with five conveniently located regional centres (Purfleet, Avonmouth, Worksop, Edinburgh, Loughborough) ! Courses can be delivered on operator premises or at selected Scania sites ! Courses are all-inclusive, including updating of Government's driver database within five working days Why start now? ! Driver CPC training is intended to be 'periodic'. Our recommendation is to plan for one day's training per driver per year. ! With an estimated 700,000 professional drivers in the UK, If training is left until the deadline, (September 2014), there may a shortage of Driver CPC training availability ! Currently, drivers pass on attendance only. This could change with an examination being introduced in future years ! Low-cost training offers currently available nationwide ! Additional discount offered for bulk bookings

For further information: Telephone: 0844 800 9131 www.scania.co.uk/drivercpc

Call 0844 800 9131 or visit: www.scania.co.uk/drivercpc

Our courses Presented by our own in-house team of specialists, our courses are fullycompliant with EU legislation and can be tailored to meet individual needs from a broad choice of options. In addition to our open courses, where you or your drivers attend one of our UK Driver CPC training centres, for larger groups we can come to you. We also provide 'train-the-trainer' days to enable your driver instructors to conduct their own training in-house.

Safe and fuel-efficient driving Safety on the road Safe driving techniques Vehicle technology Factors affecting fuel consumption Emissions and environmental impact Daily inspection and maintenance Laws, regulations and corporate issues Drivers' hours Tachographs

Working Time Directive

Occupational risk and health Risk awareness Traffic risks Workplace accidents Emergency situations Breakdowns Vehicle evacuation Be prepared

Fatigue awareness

Arriving at the scene of an accident

PCV-specific training Passenger comfort and safety Driving style Safety on board Use of seat belts Passengers with special requirements School transport

Driver CPC legislation: Your questions answered ! CPC = Certificate of Professional Competence ! EU Driver CPC legislation came into effect in Sep 2008 for PCV drivers and a year later for LGV drivers

! Training must be in blocks of no less than seven hours each

! The qualification attained is currently based on attendance, not an examination

! The first 35 hours training for all drivers is to be completed by Sep 2013/14 (PCV/LGV)

! Drivers must carry their Driver Card as proof of training when driving an LGV or PCV

! All LGV and PCV drivers must complete 35 hours of periodic training every five years

! If training is not completed in time, it will be illegal to drive for hire or reward

! Training hours are logged on a Government database, for which an upload fee is chargeable

Case studies: maximising the opportunity On the following pages, three operators explain how they are making most of Driver CPC with training from Scania that's flexible, focused and relevant

The Scania Driver Experience Delivering the right training, at the right time, in the right place and at the right cost.

And whether you wish to use your own trainers or have us provide a full service for you, the Scania Driver Experience is geared up to accommodate every need.

Call 0844 800 9131 or visit: www.scania.co.uk/drivercpc

UK Mail As a nationwide provider of mail, parcels, pallets, sameday and retail logistics services, UK Mail has 55 depots and 400 drivers spread around the country.

Given the geographical spread of its operations and the fact that many of its drivers are night workers, UK Mail was looking for a nationwide service provider which could offer a bespoke Driver CPC package and deliver it at times to suit the company – which would include training in the evenings.

"That quickly narrowed down the options, "says UK Mail's Linehaul Manager, Ian Edmondson. "Although we are a long-standing Scania operator and enjoy a close relationship with the organisation, we did review the market before making our choice. In the end it was a combination of factors – module content adapted to our needs, the ability to provide training at night and Scania's expertise with the vehicles we operate – that won Scania the business. There is also the added bonus that Scania is prepared to bring its training to us whenever we need them to. That means a lot in terms of convenience and helps minimise any disruption to our business."

Key service features for UK Mail ! Bespoke courses designed to suit the company's specific needs ! Training provided day and night ! Nationwide training service "It's working very well for us, the feedback has been very good to date" Ian Edmondson, Linehaul Manager, UK Mail

Knights of Old Limited As one of the UK's leading distribution and logistics specialists, Knights of Old has just over 150 drivers, including day and night workers, located at four depots.

"We started our Driver CPC training early on and originally began by outsourcing," says Knight of Old's Driver Trainer and Development Manager, Lee Russell. "But when we became aware that Scania could train me as a Driver CPC trainer and that I would then be able to operate under their JAUPT accreditation, we decided to investigate that option instead.

"We quickly realised this would be a far more efficient way for us to operate, both financially and in terms of training provision. The demands of the business mean that driver-movements are often only known a day or two in advance, so we need to be able to schedule training at short notice. An inhouse trainer is therefore the ideal solution for us.

"For my part, Scania's train-the-trainer modules, which have Knights of Old-specific detail added to the base product, take two or three days to complete. Thereafter, I am left to adapt the training to my own style and when I feel ready, Scania return and assess me. Once I've been cleared to go, I then start training, with Scania regularly auditing my sessions to ensure standards are being maintained."

Key service features for Knights of Old Limited ! Train-the-trainer ! More cost-effective and convenient than outsourcing ! Flexible solution accommodates operational needs "Many drivers are very receptive – we've had some terrific comments" Lee Russell, Driver Training and Development Manager, Knights of Old

Call 0844 800 9131 or visit: www.scania.co.uk/drivercpc

Menzies Aviation Limited Menzies Aviation Limited is responsible for providing staff transfers between the car parks and the various places of work at Heathrow Airport. It's a 24/7 merry-go-round operation, employing a total of 120 drivers and a fleet of 36 Scania OmniCity single deck and articulated buses.

"We move around 20,000 people a day on short journeys mostly lasting around ten minutes or so," explains the company's Training Officer, Martin Phillips. "Our drivers include full time employees and regularly-employed agency staff. In 2007 we began looking into how best to provide both groups with Driver CPC training.

"This included a discussion with Scania, who flagged up the possibility of training me as a trainer. We had been considering setting up as a Driver CPC centre, but it was immediately obvious that the Scania solution was far more cost-effective and would be much more straightforward for us to enact."

Today, Menzies Aviation Limited is registered as an external Scania Driver CPC training centre for its own in-house courses. Martin Phillips runs the training and Scania provides the backup and admin support, which includes all driver data uploads to the government's central database and communications with the DVLA. "We offer training to all our drivers, employees and agency staff alike, and pay all the upload and management fees," says Martin Phillips. "The only proviso is that the company stipulates training has to be carried out on one of the driver's rest days. We feel that approach represents commitment

on the part of both parties. The contribution the company makes also discourages drivers from making their own training arrangements, which would be impractical as it could leave us short staffed on occasions.

"The whole programme is proving to be a very workable solution which suits everyone's needs as it enables drivers to improve their performance and maintain their licences and the company plan and organise its Driver CPC training in a structured way."

Key service features for Menzies Aviation Limited ! External training centre operating under Scania's JAUPT accreditation ! Facilitates training of company employees and agency staff ! Full data management and support service provided by Scania "Is it all worthwhile? Yes – I believe you can always learn and improve" Martin Phillips, Training Officer, Menzies Aviation

Scania (Great Britain) Limited Delaware Drive Tongwell Milton Keynes

Telephone: 01908 210210 Fax: 01908 215040

All information correct at time of going to press. Please consult Scania

Website: www.scania.co.uk

Driver Experience on 0844 800 9131 for further information and/or any updates to services provided.

Peace of mind

TM

SL5451395

MK15 8HB