Designed by Piratchada Thongra-ar, 2016 Copyrights © 2016 by ScaraBeads www.scarabeads.com, scarabeads.etsy.com
This material here is for a bracelet without a center component. - 8pcs 2.5x5mm Superduo – Pastel Emerald - 8pcs 2.5x5mm Superduo – Pastel Light Coral - 24pc 4mm Pearl round - White - 2g. 10/0 PRECIOSA rocailles seed beads – Metallic Orange - 1g. 10/0 PRECIOSA rocailles seed beads – Turquoise Green Terra Matte - Nymo Thread D or your favorite thread. - Beading Needles - Jumpring - Clasp
2
Abbreviation - Superduo, Emerald = SD-A - Superduo, Pink = SD-B - 10/0 seed bead, Metallic Orange, Color A = 10/0A - 10/0 seed bead, Matte Green, Color B = 10/0B
You can cut the new thread or use the remaining thread. Pass through your beads and exit at 10/0B (red arrow).
Pick up two 10/0A, 10/0B and two 10/0A. Pass through 10/0B (red arrow). Pass through the next 10/0s and exit at 10/0B (blue arrow).
3
Pick up three 10/0A, SD-A, 10/0A, SD-A and three 10/0A. Pass through 10/0B (red arrow). Continue through the next beads and exit at 10/0B after the second SD-A (blue arrow).
Pick up 10/0B and 10/0A. Pass through the free hole of SD-A (red arrow). 4
Pick up 10/0A, pearl and 10/0A. Pass through SD-A (red arrow).
Pick up 10/0A and 10/0B. Pass through 10/0A (red arrow).
5
Pass through the next SD-A and 10/0s all the way to the pearl (red arrow).
Pick up three 10/0A, 10/0B and three 10/0A. Pass through pearl (red arrow). Continue through three 10/0A and 10/0B (blue arrow).
6
This is the same as step 2. Pick up three 10/0A, SD-B, 10/0A, SD-B and three 10/0A. Pass through 10/0B (red arrow).
Pass through the next three 10/0A, SD-B, 10/0A, SD-B and 10/0A (red arrow). 7
Pick up 10/0B and 10/0A. Pass through the free hole of SD-B (red arrow).
Pick up 10/0A, pearl and 10/0A. Pass through SD-B (red arrow).
8
Pick up 10/0A and 10/0B. Pass through 10/0A (red arrow).
Pass through the next SD-B and 10/0s all the way to the pearl (red arrow).
9
Pick up three 10/0A, 10/0B and three 10/0A. Pass through pearl (red arrow). Continue through three 10/0A and 10/0B (blue arrow).
Repeat step 2 and 3. At the end, exit at 10/0B (red arrow).
10
Pass through the next three 10/0A. Pick up 10/0B and pass through 10/0A (red arrow).
Pick up 10/0A, 10/0B and 10/0A. Pass through 10/0A (red arrow) and 10/0B (blue arrow).
11
Pick up 10/0A, pearl and 10/0B. Pass through two 10/0A (red arrows).
Repeat step 4 all the way to the component. At the end, pass through 10/0B (red arrow).
12
Pass through the next 10/0s in circle and exit at 10/0A (red arrow).
Pick up 10/0B, pearl and 10/0A. Pass through 10/0B (red arrow) and 10/0A (blue arrow). 13
Pick up 10/0A, 10/0B and 10/0A. Pass through 10/0A (red arrow).
Pick up 10/0B. Pass through two 10/0A (red arrows).
14
Repeat step 5 until the end. Exit at 10/0B (red arrow).
Pass through three 10/0A and 10/0B (red arrow).
15
Pass through 10/0A (red arrow), 10/0B and 10/0A (blue arrow).
Pick up 10/0A, 10/0B and seven 10/0A. Pass through 10/0B (red arrow). (You can pick up eight 10/0A if you don't want this line to be too tight around the pearl.) 16
Pass through 10/0A (red arrow), 10/0B and 10/0A (blue arrow).
Repeat step 6 the same way to the component. At the end, pick up 10/0A, 10/0B and four 10/0A. Pass through 10/0A on the chilli bead (red arrow).
17
Pass through 10/0s all the way down to 10/0A at the other chilli bead (red arrow).
Pick up four 10/0A, 10/0B and 10/0A. Pass through 10/0A (red arrow).
18
Pass through the next 10/0B, 10/0A and 10/0B (red arrow).
Pick up seven 10/0A, 10/0B and 10/0A. Pass through 10/0A (red arrow). (Again, you can pick eight 10/0A if you want.)
19
Repeat step 7 until the end.
Repeat the same way to the other side. At the end, add jumpring and clasp to the loop.
20
Designed by Piratchada Thongra-ar, 2016 Copyrights Š 2016 by ScaraBeads www.scarabeads.com, scarabeads.etsy.com All right reserved by ScaraBeads. No part of this tutorial may be reproduced or transmitted in any form or by any means without written permission from ScaraBeads.
21