INFLZMB101- Giant Zombie Crawling out of Grave Towering over 19’ tall and 38’ wide our inflatable Zombie creates a lot of attention. It will become an instant photo Op your patrons will post to Facebook, advertising your attraction/event. Use it as a facade for your building, as an entrance, allowing people to walk under and thru his outstretched arm or simply put it in your parking lot to draw a crowd. The perfect entrance for outdoor zombie paintball or cornmazes. Great for those hard to detail larger outdoor scenes. Designed for outdoor use, made of durable nylon and hand painted with UV stable/waterproof inks. Will hold his color and not fade over time. Unit sets up in minutes, stores in a 36” x 48” box and includes (2) highpower blowers & rope tie downs.
INFLZMB102 Giant Zombie Tombstone Companion inflatable to our INFLZMB102, free standing second inflatable allows you to engrave your attraction’s name or any custom message on Giant Tombstone Use them . both together to create an enormous visual spectacle
Your Name Here
INFLZMB101 Giant Zombie out of Grave INFLZMB102 Giant Zombie Tombstone
19’6”
8’2”
39’
© 2013 The Scarefactory, Inc.
27’
Entire contents, all rights reserved. Visit us at www.scarefactory.com or call 614-252-8000
GD130- Skarem ElderDragonOur incredible animatronic Dragon sits perched atop the Dragon’s Gate guarding it from any who would dare to enter. As your patrons approach the Dragon comes to life to blast them with his hot breath (LED lit, colored super compressed air/fog)and menace them with his snapping jaws. Character features multiple head, neck, jaw movements, backlit LED eyes, optional LED lit custom high pressure air/fog blast. Character dimensions when placed atop entry gate are 19’6” to top of shoulder and a width of 15’ to exterior of wings.
GD131- Dragon’s Gate Entry PortalElaborate entry gate measures 9’6” wide by 9’9” tall with a center opening of 4’ wide by 7’ tall. Designed for outdoor use. GD132- Internal Steel Super StructureDesigned to be unseen hidden within the Gate Entry Portal, this super sturdy steel structure bolts together and provides ground support to the heavy moving animated Dragon.
Page 2
Our incredible Giant Spyder is now actor powered. Measuring 9’ across, standing actor fits perfectly within the rear abdomen of the Spyder allowing them to drive the character and chase patrons without the need of a track. All movements are actor controlled/powered, so no need for air or electricity. All (8) legs fully articulate and (2) forward legs rear up and reach for patrons independently of one another, allowing your actor to paw, reach and rear up to strike patrons.
SPY107 Actor Giant Spyder
MNK107 Maniacal Monkey Animated Monkey features a variety or upper body, arm, head and jaw movements.
WOLF107- Dog TrashCan Our incredibly popular Attacking German Shepherd has been reworked to hide perfectly in a typical metal trash can. When activated dog leaps out of can thrashing back/forth and side/side with jaws snapping... get’s them every time.
Page 3
CHR312Swing Girl This disturbingly angry little girl swings back and forth on swing.
SFX30- HighPressure Air/Fog BlastWe’ve engineered a high output fogger with a triggered Highpressure large diameter air release to create a very effective high pressure fog blast that economically resembles a high output CO2 blast. The fog gives the blast color so that you can light it to resemble a blast of flame.
GD140- WendigoThis enormous malevolent cannibalistic creature from Algonquian mythology has an intense craving for human flesh. Our animatronic version stands 12’ tall and 11’6” wide and features sweeping body, arm, head and jaw movements, LED backlit eyes, and is pre-configured for our optional custom high pressure air/fog blast for extra effect. GD136- Skarem Dragon Head/Neck- Fully Animatronic Version Animated version of Dragon described below GD135- Skarem Dragon Head/Neck- Actor Operated Version Another in our line of Super Puppets, your actor stands in a cockpit inside the giant neck of the Dragon allowing him total control of the head/neck. Neck mounts to super heavy duty bearings on vertical base, allowing almost 90 degrees of motion, a second pivot/bearing halfway down the neck adds even more movement, allowing the character to forward and back in a smaller arch. As he walks forward and back the dragon’s neck extends/retracts, your actor controls all of the intricate head movements of the dragon allowing him to interact directly with your patrons. Pushbuttons on the hand controls trigger pre-grammed/recorded jaw movements which are synched to audio tracks. The unit is also pre-configured for our optional custom high pressure air/fog blast for extra effect.
Range of Movement
Page 4
Actor inside
Actor inside
FLY1300- GhostRider- Actor Driven Puppet RigThis rig actually lets your actors ride inside and control our new line of Super Puppets. The GhostRider is a new breed of actor/pneumatic hybrids allowing your actors sit comfortably in a chair (cup holders included) as they have total interactive control of our giant flying super puppets. Super heavy duty Pneumatic arm is floor based and swings in a 7’ arch via a pneumatic cylinder, which is controlled/driven by a simple pushbutton on the characters hand controls. FLY1301- The Tormentor- Flying Super PuppetThe first in our new line of hybrid flying super puppets The Tormentor hovers to a height of 11’ and a width of 6’. Character is actor/interactively controlled, from the comfort of your actors seated position, you control body movements, arm extensions and reach, characters jaw and synched audio pre-programmed and pneumatically powered via push button, actor controls 7’ sweep of GhostRyder rig via pushbutton on hand controls. Character features LED eyes and is preconfigured to accept optional SFX30- HighPressure Air/Fog Blast. Actor/ Operator
Actor/ Operator
FLYDECK Load/unload LadderDeck for Ghostrider Custom built platform for safely loading/unloading actors from the GhostRider
Actor/ Operator 250lb. actor weight capacity
7’
7’
SFX30- HighPressure Air/Fog BlastWe’ve engineered a high output fogger with a triggered Highpressure large diameter air release to create a very effective high pressure fog blast that economically resembles a high output CO2 blast. The fog gives the blast color so that you can light it to resemble a blast of flame. Page 5
Actor/ Operator
Sweep of character movement
11’
CHR521- AbracadabaRabbit A creepy magician holds his wand in his right, a top hat in his left. A cute little white rabbit emerges from the depths of the hat. The magician waves his wand over the hat and Presto! with a flash and a bang the magicians head and upper torso flip and turn into a giant crazy maniacal rabbit with various head and jaw functions with glowing red LED’s for eyes.
ZMB780- Creepy Butler Articulating Zombiette All electric character has 5- separate articulations. SP400- Creepy Butler Static Static poseable character, dressed as shown.
CHR510- Swine is Served A large silver covered dish sits atop a fancy rolling butler’s cart, when the lid flips back and an enormous screaming bloody pig thrashes to life from an opening under the dish. Pig character has various lunging, neck, head, jaw movements as well as air blast from mouth.
CHR520Human Centipede 10’ tall and 4’6” wide our animated Human Centipede features various body and arm articulations. Page 6
VMP710- Drac-in-a-Box An elaborately decorated coffin shaped armoire sits in the corner of the room, when activated our giant Vampyre character lunges out of it with jaws snapping, character has extensive head, neck, jaw and lunging movements. Add optional Super Air Cannon for optimal surprise.
Your “legend” or “Rules of the House”
FIX718- Column Blaster- w. LycanBeautifully detailed column sits near the entry of your next scene, when patrons approach a vicious animated Lycan bursts from the Column to terrorize your guests.
FIX717- Drop Sign Pediment- w. VampThis beautiful pediment is deigned to display the Legend or Rules of your attraction in an elaborate baroque frame. Above the frame a talking skeleton draws patrons in and either reads them the rules or tells them the legend. At the dramatic conclusion of the skeletons speech, the placard drops and an enormous animated vampyre Bat lunges thru the opening. We customize the placard and skeletons script to your choosing.
GRY350Gravestone Ghouly w. LanternAn elaborate raised tombstone sits adorned with a carved skeleton holding a working lantern with flickering flame. When activated our Ghouly character breaks thru the top of the tombstone to stand and startle your guests.
Page 7
GRY351- Gravestone GhastlyAn elaborate raised tombstone sits adorned with a carved skeleton. When activated our Ghastly character breaks thru the top of the tombstone to stand and startle your guests.
FIX719- Column Blaster-Draconian Beautifully detailed column sits near the entry of your next scene, when patrons approach a vicious animated Draconian bursts from the Column to terrorize your guests.
GD124Cavalryman Articulating ZombietteAll electric Rotting Corpse leads the charge, riding high on top of exhumed coffin. articulating head, torso and arm movements.
GD123Panning Rider Articulating ZombietteAll electric corpse rides the Necromancer. Head pans left/right as arm swing hatchet forward/back.
GD121Animated Freshly Exhumed Victim-
The NecromancerHeight Crouched 10’ Top of Head 16’ Top of Tools Height Standing 14’ top of Head 20’ Top of Tools
GD120- The NecromancerGiant Necromancer roams graveyards snatching victims to collect their souls. Animated character stoops down 4’ to collect victims, which he can hold in his right hand, left arm includes hand grasp, elbow, upper arm and shoulder movements. Head pans, tilts and includes jaw function and lED eyes & mouth. Character includes giant tools of his trade, coffin on back & skull bandolier.
GD122Tied Up Articulating ZombietteZombiette corpse tied in ropes to the Necromancer’s arm. Arms and head move with an electric motor. to give the illusion of a realistic rotting corpse tied up to rot for eternity.
GD121- Animated Freshly Exhumed VictimAnimated character kicks and thashes violent convulsing in the Necromancer’s right hand flailing in an attempt to escape. GD125- The Necromancer- COMPLETE PackageIncludes Necromancer and all 4 articulating optional characters.
Page 8
COSTMANTIS- Mantis CostumeThis giant insect will really “bug” your squemish guests as it’s disgusting air blast tentacles reach out to “taste” it’s next victim. Giant legs and long sharp looking arms this is the perfect costume to make your patrons skin crawl at your attraction.
COSTCLOCK- Grandfather Clock CostumeAmazingly realistic Grandfather clock seamlessly blends into any house setting. Completely unexpected and incredibly comfortable and easy to wear, this clock will amaze your most expecting patron. Full arm and leg articulation. 2 way mirror allows your actor clear vision, and unit includes a pair of triggered LED’s inside the clock’s face so that your actor’s face can appear behind the clock’s face revealing the ghost trapped within the timepiece. The clock stands at 7’3’’.
FIX706- Drop Portrait Ghost
FIX704- Window SpectreA simple tattered curtain hangs in virtually any scene in your attraction. When activated a giant 10’ tall spectre with a 67” wing span flies into the room. Very discrete and very fast, this is a perfect startle that effects the entire group. Only 12” is required behind the wall to accommodate this affect.
Page 9
FIX705- Haunted Coat RackPerfectly camouflaged to blend in with any room. What looks like an ordinary coatrack actually hides a rotting corpse ready to pop out at your unsuspecting patrons, raising it’s ugly head and flailing its arms.
CHR506- Blasting BrideThis bride stands with her head hung low weeping, patiently waiting for her beloved husband. Suddenly she bursts forward lunging towards you, throwing her arms forward as a blast of air moves her hair which reveals that her face has suffered a severe gunshot wound. Optional air cannon attachment sold separately mounted in her head completes the effect.
CHR505- Lunging Flasher with CannonThis gag appears to be a suspicious man in a trench coat with his head down. When activated he lunges forward, snapping head up, and opens jacket to reveal a group of horrific bodies that have burst from his upper torso, reaching for you out of the stomach. Optional air cannon attachment sold separately to add effect that the creatures are literally blasting out of characters torso.
CHR507Witches CauldronAll electrical Witch stirs the contents of an elaborate skull cauldron. Movements incl head, neck, torso, arms stirring
CHR508- Witches Cauldron with Pedestal and Lunging Character- Electrical Witch stirs the contents of an elaborate skull cauldron. When activated a ghoulish melted character blasts up and out of cauldron reaching for you.
Page 10
WOLF105- Attacking German ShepherdIncredibly realistic German Shepherd obediently sits at your actors feet. Your actor triggers the vicious dog to lung forward jaws snapping, head thrashing back/forth and side/side, pawing as your actor attempts to restrain him.
Articulating ZombiettesAll electric fully articulated Zombiette characters require no air, no controllers and only 1.3 amps of electrical power, open the box plug it into the wall and you’ve got a fully articulating Zombie. Highly detailed with as many as (5) independent compelling movements, these economical characters give you movie quality props that have purposeful movements, that set the scene. ZMB765- Spill Your Guts Articulating ZombietteFreshly slashed zombiette is losing his guts. The character’s intestines are falling out and the zombies moving arms give the illusion that he is playing with his guts. Movements include head, chest, independent arm, leg and torso pivot.
ZMB766- Slasher Articulating Zombiette with VictimThis punk zombie has it out for the living. His arm moves to create a cutting motion. The victim is in front of him kneeling as his throat is being slashed. Movements include head, chest, independent arm, leg and torso pivot.
ZMB764- Rotting Articulating ZombietteRotting zombiette moves with fluid motion to create the illusion of a realistic moving corpse. Movements include head, chest, independent arm, leg and torso pivot.
ZMB768- GraveCrawler with Lantern Articulating ZombietteRagged zombie crawls out of the grave holding an electrically lit lantern to light the way. Movements include head, chest, independent arm, leg and torso pivot.
ZMB767- Ripsaw Articulating ZombietteShop Teacher gets zombified... whoops he cut his own legs off, wielding a circular saw in one hand and a modified hedge trimmer in the other, both of these saws are electrified and loud, and the modified blades of the hedge trimmer actually move, threatening to cut the legs off the next guy dumb enough to get near him. Movements include head, chest, independent arm, leg and torso pivot.
Page 11
Spectral ZombiettesSpectre Zombiettes are completely electrical hovering articulating ghosts. That means no air, no controllers and immediate gratification. Open the box, plug it into an electrical outlet and walk away. Compelling arm, head and torso movements. Each character includes highpowered LED’s in the eyes, is hand painted for natural light and is also sprayed with Invisible UV paint to make them glow/react with UV light. Three separate styles with different themeing and movements are currently available. Order them and mount them on a wall or stand or purchase the optional Hover rig to make them soar and sweep thru the air.
ZMB762Ghoulish Spectre ZombietteAll electric Ghoulish Spectre is a bit larger than the Ghastly version and movements include head forward/back, entire torso pivot, independent are raise/lower.
ZMB760Ghostly Spectre ZombietteAll electric Ghostly Spectre Zombiette is the largest of the three with an arm span of 8’. movements include head forward/back, entire torso pivot, independent are raise/lower.
69”
109”
ZMB761- Ghastly Spectre ZombietteAll electric Ghastly Spectre Zombiette movements include head raise/lower, shoulder pivot, independent arm movements.
158”
207”
100”
145”
EHG- Electric Hover RigOptional hover rig allows your Spectral Zombiette the ability to hover in fluid sweeping motions through the air. Pivoting axis of rig sits X’ off the ground allowing the Spectre to fly in a sweeping motion from X’feet up to x’. All Electric Hover Rig requires no air and only uses 1.3 amps of power, just plug it in and forget it.
EGHR- Electric Giant Hover RigGiant version of Optional hover rig allows your Spectral Zombiette the ability to hover in fluid sweeping motions through the air. Pivoting axis of rig sits X’ off the ground allowing the Spectre to fly in a sweeping motion from X’feet up to x’. All Electric Hover Rig requires no air and only uses 1.3 amps of power, just plug it in and forget it.
Page 12
GRY305- Cemetery Chapel RuinsThe breathtaking ruins of an ancient cemetery chapel makes the perfect transitional set piece to take your patrons from your graveyard or other feature in style. Standing 15’ high, measuring 23’ across and 8’ deep, use this showpiece indoors or out. 4’ opening at center is flanked by an electrically animated gargoyle whose head pans left/right.
ZMB771- Giant Angel of Death Articulating Zombiette- 11’tall & 7’ wide All electric fully articulated Giant Angel of Death movements incl Head raise/lower, torso breath, lantern arm raise/lower, scythe forward/back, torso pan. Includes LED eyes, Scythe & Lantern.
ZMB772- Pediment for Angel of DeathOptional Pediment for ZMB771 Giant Angel of Death raises the Angel of Death an additional 8’ ft making a breathtaking display for your patrons. With Pediment the angel measures 19’ high.
GRY310- Animated Skull TreeStanding 12’ tall and 10’ wide our skull adorned animated tree comes to life with a variety of trunk and limb movements.
Page 13
COF927- 1/2 Coffin LungerA half exhumed coffin protrudes out of the ground. When activated a rotting corpse blasts open the doors to lung at your patrons. Add the optional Super Air Cannon to complete the effect.
Clown Facade EntryFeaturing the face our 9’ fiberglass and steel reinforced Giant Skull painted in UV, wearing a clown nose. Facade entry has a 6’ opening, is 16’ wide and 22’ tall. Modular design allows it to be easily increased in size and we can configure it to cover virtually any area.
CLWN107- Clown Acrobat Tower11’6” Trio of acrobatic clowns balance and pitch one on top of the other. Bottom clown steadies the group as he pivots side to side while spinning plates, on his shoulder a second clown balances with leg, torso, head and independent arm movements as he balances himself with parasols, on his shoulder a final clown does a handstand with side/side and independent leg movements.
CLWN103- Headless Lunging Clown with HornHeadless Clown holds a severed head in one hand and a air horn in the other. When activated clown lunges forward, thrusting arms up and blasting horn.
CLWN102- Popcorn CartBased upon the classic carnival popcorn cart, unit features plexiglass case, fake popper & popcorn, wheeled and canopied cart. Zombified hands continuously raise and lower from popcorn cartons, when unit is activated clown bursts from underneath the popcorn to smash into the glass and slide down.
Page 14
CLWN104-11’ Stilted Clown w. BalloonsAll electric fully articulated Stilted Clown stands 11’ tall. Character requires no air, no controllers and only 1.3 amps of electrical power, open the box plug it into the wall and you’ve got a fully articulating character. Movements include head, chest, independent arms, and torso pivot. CLWN105- 8’ Stilted Clown w. BalloonsSame as CLWN104 except only 8’ tall and alternative head and costume.
GRY300Winged Reaper Cemetery Facade18’8” wide x 15’ tall with a 5’opening between the columns, this beautiful Cemetery Gate features a pair of Reaper characters that include electric motors that make their heads pan from left to right as the Coach Lights they are holding are illuminated. Carved bas relief Angel wings give the entry dramatic sweeping height. The support columns feature an elaborate cut out grating creating a back lit effect.
GRY301Iron Gate Package for Cemetery FacadeIron gate package shown includes; Hinged working Iron gates with finials and angled decorative side curtains.
GRY304Skelly Pall Bearers(4) structural steel reinforced skeletons carry our economy thrashing coffin. When activated chained coffin doors thrashes violently as victim inside attempts to bang his way out. A 5th skeleton rides on top to make certain that victim inside doesn’t escape.
GRY307- Crypt BangerStone carved crypt contains the remains of a not-quite-dead ghoul whois trying to bang his way out of the crypts hinged door.
CHR500- BeScare CrowHighly detailed rotting remains of victim that has been tied to a post & left to rot, warning all not to enter. When activated corpse thrashes violently back/forth, head lunging/turning, arms flailing, trying in vain to free himself from his bonds. Page 15
GRY303Weeping Angel Monument(Static)
GRY302Animated Weeping Angel MonumentStone Angel jumps straight up from monument to reveal hideous skeletal remains. Features hissing tongue, head and arm movements.
Character movements include: Angel of Death-character up/down, head pan, jaw. Victim- left leg, right leg kicking, left arm, right arm, head forward/back, head left/right Demons- unfold grasping victim
Talk about stopping traffic. Whether you park it out in front of your attraction, put it in a parade, or even just drive into a densely populated area, you are certain to create a tremendous amount of publicity with a working hearse that fires a fully animated scene featuring an 18’ tall animated Grim Reaper out of the top of it.
18’
GD100Last RideAngel of Death Hearse-
Choose from (12) different models and makes of late model, road worthy, low mileage working hearses. When activated our pneumatic Angel of Death character rises to an astounding 18’ out of the back of the hearse holding a screaming thrashing victim that is being pulled back into the hearse by a pair of lesser demons.
Page 16
GRY305- Animated SkeleCryptGroup of (6) rotting skeletons stand straight up pushing open the top of stone sarcophagus.
GRY306SkeleCryptStaticstatic version of closed sarcophagus
GD110- Hell DemonOnly 6’0” tall when collapsed and hidden our Hell Demon rises to the incredible height of 18’6” with a wig span of 19’. Character features independent arm, wing, head and jaw movements. Demon is designed to hold and lift optional thrashing victim describe below. GD112- Hell Demon VictimArticulating thrashing victim is designed to be held by the legs. Characters thrashes via independent leg and abdominal movements.
GD114- Demon CryptBeautiful bas relieved Crypt features Skeletal Skull and shield crest/sheild on both ends and dramatic relief of the Angel of Death encompassing both entire sides of the crypt.
18’6”
Page 17
DRAC702Draconian Jumper6’ Draconian stands on stylized base. When activated character jumps 4’ straight up and then falls forward.
DRACZMB770Draconian Articulating ZombietteAll electrical, no air, no controller. Draconian head pans back and fourth with fluid feasting arm movements.
DRAC703 Draconian Swinger
DRAC700- Animated Draconian Column6’ tall stone Draconian sits atop column, when activated character violently jumps down to land on base. Movements include: character jump, head pan, tongue hissing, leg extension. DRAC701- Draconian Column- (static)static version of above
Page 18
DRAC703- Draconian Swinger6’ tall Draconian in dramatic swinging pose, designed to hang from rope at arm and foot. Character movements include arms, head pan, leg/torso. DRACSWNG- Swing Rig for DraconianRig provides swing-assist to Draconian suspended from rope.
DRACALT- Collapsing Draconian Altar-Accessory to our Animated Draconian Column, when Draconian lands on Alter it collapses under its weight with an enormous percussive blast.
DINO203- T-Rex Skeleton Crypt An ancient gothic crypt is guarded by the grisly remains of a ghastly skeletal horde. When activated the giant head of an angry t-rex skeleton lunges through the opening, jaws snapping. Movements include: T-rex character, lunge forward/back, head left/right, head pan, head tilt, jaws and crypt doors open/close.
GD126- Necromancer- Arm thru WindowThe Giant Tree Branch Arm of our Necromancer character reaches in through the window ready to snatch a victim. Movements include hand grasp, elbow, shoulder allowing arm to enter and exit thru a 42� window.
CHR501- Granny KittyGranny sits in mourning, holding her beloved kitty. When activated, granny stands, swings her arm and kitty, as a blast of air lifts her veil revealing her face. Page 19
COSTCHR- Comfy Chair CostumeBeautifully detailed gothic armchair sits motionless in the scene, Lightweight and comfortable, perfectly concealing the actor sitting inside. Actor comes to life to startle unsuspecting victims, propelling himself with his legs in the seated position on the included wheeled stool and then finally jumping to his feet and chase them from the scene.
SPR2020- Strolling Shopping CartRatty old shopping cart filled with trash perfectly conceals the skeletal ghoul hiding beneath, waiting to spring into your patrons faces. Perfect for your parking lot, midway, or just about any scene, our unit requires no air or electricity, because it is completely spring powered. Allowing your actors to stroll, startle and chase your unsuspecting victims at will.
Tort200- Animated Iron MaidenDeveloped during our History Channel series, “Surviving History�, The iron maiden was one of histories most devious devices. Designed to torture and bleed victims to death, ours is designed with doors that allow you to see all of the grisly details inside. Bleeding female victim thrashes against the doors until she finally breaks through, violently flailing at your feet. Unit includes maiden, stand, animated doors, animated victim, and recirculating blood pump. Page 20
HOD700- Hallway 2 HellMoving wall system can be independently programmed to pitch left, yaw right, bounce, shutter, wave back and forth and collapse at will. Individual units are 10’ long, with a dedicated walkway width of 5’, when in its tallest position unit stands 9’. By putting two of these units together and programming theme differently, you create an incredibly dramatic 20’ Hallway that nicely replaces in both size and function the industries spinning tunnel effects, without the need for steps, ramps or handrails. Unlike spinning tunnels, this effect can be easily integrated within a variety of themes and it fits in seamlessly with the rest of your attraction. The unit sets up in minutes not hours. Modular panel design allows the unit to be quickly and easily setup and the pieces are small enough and light weight to allow them to go anywhere in your attraction without the need to de-construct your maze. Base units come unthemed so that you can ‘decorate it yourself and save” or you can buy the optional themeing packages below, allowing the unit to arrive completely ready to just plug in and go. HOD701- Haunted Mansion Themeing package for H2H Essentially everything you need to complete and theme your Hallway2 Hell System into a creepy Hallway in a Haunted Victorian Mansion. Everything comes pre-installed, completely themed and ready to go. Package includes: all of the waynes coating, chair rail decorative safety flaps, floorboard decorative safety flaps, 3/4’ decking for floor, “broken away” plywood walls and ceiling with extensive exposed latticework, wall paper, curtains, 1window, 1 painting, 9- assorted zombie upper torsos & 3- pairs of zombie hands reaching through the latticework. Other Themes availalbe include: HOD702- Corridor of Corpses Themeing package for H2H HOD703- Underground Cave/Mine with timbersHOD704- Underground Sewer with electrical lines and water- HOD705- Pirate Ship with skeletal piratesHOD706- Medieval Castle Crypt with knightsHOD707- Egyptian Tomb with mummiesHOD708- Giant Spiders Nest with victimsPage 21
SKEL111- Skelly Arm SwingerUpper torso of rotting skeleton swings back and fourth through the air propelling himself with independent arm movements.
SKEL100- Diagonal Skelly ClimberSkeletal climber climbs diagonally up and down suspended rope. Features head, leg and arm climbing movements. Optional victim can be carried in hand.
SKEL104- Skelly SweeperWhile our other skeletons seem to reek havoc and enjoy making a mess, this guy is really trying to clean up his act. When activated, the vacuum comes to life with a roar, a light and the skeleton rides the vacuum as it moves back and forth.
SKEL107- Skelly Dunk BarrelArticulating skeleton forces victim into old rain barrel. Victim rises out of barrel with air/water blast.
SKEL101- Thrashing Dangler Out of Barrel with Articulating SkellyArticulated skeleton pulls rope that lowers and raises thrashing victim SKEL 105- Skelly Tug-O-Warhead first in and out of old barrel. Unit includes articulated skeleton, More of our Skeletons making Mayhem series, a pair of skeletal figures fight stand, barrel, and animated character that features independent leg and over their latest victim, by using her to have a tug of war with her pigtails. upper torso movements. Page 22
SKEL110- Skelly Canopy BedA frightened little girl awakens from her nightmare to find that her room has been infested by a hoard of mischievous skeletons. Our canopy bed features the figure of the frightened girl, a skeleton jumping up and down on the end of her bed with independent arm movements, a second skeleton hanging upside-down, hanging from his legs playing peek-a-boo. with the bed’s canopy while a third and final skeleton blasts straight up from the foot of her bed to startle patrons passing by.
SKEL108Peek-A-Boo CurtainHidden behind the curtains a skeletal character quickly throws them open to lunge into the room.
SKEL106Skelly Head BangerArticulating skeleton beats his victim’s head to a bloody pulp. Thrashing him over and over into the floor.
SKEL109- Skelly Table BangerThis articulating skeleton has definitely lost it. When activated, seated skeletal figure rocks violently back and fourth in his chair throwing his arms and hands back, slamming them on the table.
SKEL103- Skelly’s Out of a ClosetEveryone has skeletons in their closet. These three burst out to startle your guests when they walk by.
Page 23
Another incredible example of our modular character/facade combination in which we let you decide the ultimate size and complexity of your character. You can purchase just the character for an imposing ground based effect, add wings and take the character up and you have a larger than life spectacle, add the propulsion rig to make the character fly and pan to fly right over your patrons heads and then finally add facade components to give your new creature the home that he deserves, while at the same time allowing you to customize the size, function and ultimately... the impact The Angel of Death will have on your audience.
Put this incredible moving piece of art out front to advertise your attraction and reap the enormous media attention that this character generates. Character can be programmed to say and do whatever you want to attract and entertain patrons and to promote
GD80- The Angel of Death-Animated Character- head height is 9’ from base, movements include head pan/tilt, jaw and 6 isolated arm movements GD81- Static Wings- max span of 20’adjustable steel mount supports heavy fiberglass ribbing for flexibility/durability, wind/water resistant nylon fabric GD82-Animated Wings- wings as described above mounted into independent pneumatic pivots GD83- Aluminum Scythe- lightweight aluminum structure with urethane sculpture overlay GD84- Propulsion Rig- propulsion rig sends character forward 9’, rig pans at base making character pan a max 16’, also includes second pan at character so that when rig pans left character can pan right independently GD85- Facade Entry- includes entry portico, tunnel with interior sculpted panels, center towers & entry columns GD86- Facade Wings- 12’ tall sculpted panels with side towers GD87- Facade Mausoleums- free standing booths add dimension and can be used to house characters our be used as exits GD88- Steel super structure for Prop Rig- required if Propulsion Rig option is utilized, heavy steel frame secures character/propulsion rig to ground. HOD401- Skeletal Wall Panel GD89- Animated Satyr Guard- Optional animated characters feature “Creeper” movements pivoting at waist and head pan
HOD403- Skeletal Wall Panel HOD400 Series 2’ x 4’ Skeletal Wall SectionsBorn from the success of our other 3-dimensional wall systems, these walls are made from 5# density urethane pulled from 4 different molds. Tile them to create highly detailed 4’ x 8’ walls, wrap them around columns to create cylinders/columns or just apply them to decorate any space in your dungeon.
HOD402- Skeletal Wall Panel
Page 24
HOD404- Skeletal Wall
VMP705 Flying Vampyre Bat
VMP705 Flying Vampyre Bat
VMP704 Leaping Vampyre Bat
CHR400R Body Snatcher
CHR400L Body Snatcher VMP708 18’ Ancient Ruin Column/Arch
VMP703 Feasting Vampyre Bat VMP702 Vampyre Bat Static
VMP706-Ancient Ruin Statue Column Static
VMP700 & VMP701 Vampyre Feasting Tableau & Victim
VMP707-Ancient Ruin Statue Column Lunging AirCannon Blaster
VMP707-Ancient Ruin Statue Column AirCannon Lunging Blastera decorative curved column section holds skeletal statue that lunges forward with a powerful blast of air from aircannon directly over your audiences heads.
VMP708- 18’ Ancient Ruin Column/ArchVMP709- 16’ Ancient Ruin Column/ArchGothic arches with skeltal column details set the scene indoors or out. Wooden construction with urethane characters, skulls, overlay and details
VMP706-Ancient Ruin Statue Column Staticstatic version of above
Page 25
VMP705- Flying Vampyre Bat6’6’ tall with a 15’ wing span our Flying Vampyre Bat features the following movements: Wings Up/down, Head left/right & forward/back, Jaw. Steel & fiberglass rod wing assembly covered in spandex. Fly this character indoors or out. Perfect for those crucial overhead scares!
SFX20- Programmable Prop WenchThis device allows you to fly (raise/lower) your characters synchronous to character action, via aircraft cable and an electric wench. Will handle loads up to 225lbs. with travel up to 30’.
CHR400L- Body Snatcher Climber- Left Hand freeCHR400R- Body Snatcher Climber- Right Hand freeGoblin like Body Snatcher climber features arm, leg and head movements that make it appear to climb up/down a rope in a very realistic and freaky illusion. This effect is perfect for high ceilings, outdoor scenes and to put out on front of your building to attract attention. Character is designed to hold one of the optional victims listed below. RD150- Body Snatcher Victim- held by LegRD151- Body Snatcher Victim- held by Hair articulated internal steel rod construction allows characters to realistically flop around while being carried by Body Snatchers.
Page 26
VMP704- Leaping Vampyre Bat- Our 6’6” Vampyre Bat with a 15’ Wing span, lays in wait with it’s wings folded, resting on its back waiting for the perfect opportunity to spring into action and fly up and over your audience flipping into the perfect attack position. The wings dramatically snap open/closed with independent jaw function. The standard version finishes at an amazing 14’ overhead, but 12’, 10’ & 8’ versions are also available.
VMP700- Vampyre Feasting Tableau- made of steel and urethane, our tableau appears to carved out of an ancient block of stone. These ancient creatures have devised this ritualistic tableau to securely hold their inverted sacrificial victim to insure proper blood flow to the neck, because let’s face they want every drop! VMP701- Vampyre Feasting Tableau Victim- life cast of female victim for ultra realism, with a ghastly gnawed on wound at the neck, internal steel linkage allows pneumatic cylinder to spasmodically ungulate the characters upper torso to have her flail about as her last few drops are consumed. RD152- Vampyre Feasting Tableau Victim- same as above in static version
VMP704 Leaping Vampyre Bat
VMP702- Vampyre Bat Static- static version of Bat shown below, please specify standing, feeding or flying position. VMPCostume- Vampyre Bat Costume- Actor wearable costume of Vampyre Bat VMP703- Feasting Vampyre Bat- crouched Vampyre features realistic head up/down and panning movements that allow it to bend down and feed at the neck. Independent jaw function and a synchronously triggered recirculating blood pump allow him to lookup from his victim, turn his head towards you smacking his lips as blood gushes from his mouth. VMP703 Feasting Vampyre Bat
VMP702 Vampyre Bat Static or Costume VMP700 & VMP701 Vampyre Feasting Tableau & Victim
Page 27
ZMB769Hanging Vampyre Articulating ZombietteRun by an electric motor. Vampyre opens his wings & mouth as head pans back and fourth. No air or controls needed.
ZMB750- SkelelaBerafemale? 6’6” Skeletal Zombiette holds a pair of lit (6) candled beaded candelabra while rotating at the waist, another in our line of fully electronic (no air required) moving effects, plug it into to any wall outlet and away it goes. A very cool and classy piece, that sets the scene while adding movement and lighting effect.
ZMB753- One Armed Wall Sconce Skelelabera- A decorative wall plaquard with a Skeletal Zombiette arm poking out, holds a lit (6) candled candelabra while slowing raising and lowering it.
ZMB752- Upper Torso Wall Sconce Skelelabera- Upper Torso of Skeletal Zombiette holds a lit (6) candled candelabra while swaying and rotating it in a creepy movement.
Electronic (no air required) moving effect, plug it into to any wall outlet and away it goes.
ZMB751- SkelelaBroMale? 6’6” Skeletal Zombiette holds a pair of lit (6) candled candelabra while rotating at the waist, another in our line of fully electronic (no air required) moving effects, plug it into to any wall outlet and away it goes. A very cool and classy piece, that sets the scene while adding movement and lighting effect.
Electronic (no air required) moving effect, plug it into to any wall outlet and away it goes.
Page 28
HODPIANO- Haunted Grand Piano- same Piano as described below, except as a static version that does not include the 13 skeletons that come screaming out from under the lid.
HODPIANOANI- Haunted Grand Piano Animated- Beautifully detailed gothic piano features Grim Reaper relief sculpture on lid with skull and gold leaf details throughout body, when activated a mob of 13 skeletons come screaming out from under the lid... add the air cannon option to complete this startling effect. Steel internal frame covered with wood with urethane details. Standard unit is designed to accommodate Casio or Yahamaha 88-weighted key electronic keyboard (sold separately) so that an actor can play it or the unit can be outfitted with one of our Digital Sound Effect units for a completely automated effect.
Page 29
FRN700- Butcher Table HandRunner- the severed upper torso of a bloody victim lays on a butcher table, when activated, the character springs to life and “runs” on it’s hands down the table 4’ towards your audience, apparently propelling itself by its hands. A pair of cylinders in each arm, along with a torso cylinder and neck pivots give this character all of its crazy movements, while sturdy bearings inserted into an iron track system are powered by a heavy duty cylinder.. A very loud, terrifying effect.
FRN702Coffee Table Corpsesa group of (5) Skeletal Ghouls lie waiting to spring out from under the hidden lid of a wooden coffee table.
FRN701- Love Seat Leapera perfectly camouflaged ghoul lies waiting to spring out, up and over to bang and thrash on an adjacent coffee table... features crazy arm movements, a loud terrifying effect they will never see coming.
Page 30
FIX700- Trophy Buck Blaster- The gnarled and bloody Head of a trophy buck is mounted high on the wall, when activated the remaining skinned entire Body of the deer jumps thru the opening of the wall thrashing and kicking as the deer has been skinned and mounted alive! Character movements include independent leg, torso up/down, torso left/right, articulating head. A violent disturbing display that they will never see coming.
RD153- Trophy Buck Bloody Head- The gnarled and bloody Head of a trophy buck is mounted on wooden placard.
CHR402- Mango PitchFork- 8’6” Mango armed with a 11’ long pitchfork flails around an unfortunate victim skewered on the end of it. Powerful left and right arm movements flip our ragdoll victim violently 12’ into the air, while Mango’s head thrashes back/forth and left/right.
FIX702- Fireplace/Floor HandRunner- Designed to come out of a fireplace or to crawl out and across any floor, the Upper torso of this ghoulish character travels 4’ apparently propelling itself by its hands. A pair of cylinders in each arm, along with a torso cylinder and neck pivots give this character all of its crazy movements, while sturdy bearings inserted into an iron track system are powered by a heavy duty cable cylinder.
Page 31
WLF103- Stalking Wolf- Free standing wolf has realistic head movements which pan left/right, with jaw movement.
WLF101- Feeding Wolf- a supernatural sized black wolf feeds with his front paws on a table, feasting on the grisly remains of unfortunate human victims. Standing wolf has realistic head movements which pan left/right, head raises/lowers as jaws munch away. WLFTBL- Wolf Feeding Table- solid steel sturdy construction with wood overlay, includes human victim remains as shown WLF102- Leaping Wolf- a second supernatural sized Wolf waits hidden behind the table waiting for the opportune time to leap through the air and land on top of the table, head thrashing and jaws snapping. The first wolf was merely a well executed distraction so that the incredibly fast second wolf could pounce violently on your unsuspecting victims.
WLK102 Agnes Granma Walker
Geriatric Walkers- these old coots have lost their Depends in a big way, in fact everything from the waist down is completely gone! But, that’s not going to stop them from trying to chase after you!!! Disturbingly funny and frighteningly realistic movements cause these characters to thrash back/force and side/side as they attempt to propel themselves after their victims... .... don’t let them catch you!
Page 32
WLK101 Earnst Granpa Walker
Put your attraction on the map with The Slayer- our incredible (8)-function animated creature. The Slayer is designed to be used indoors or out, it’s modular design allows the user to determine the ultimate size of the character, main body is 9’ tall and 8’ wide allowing it to fit into smaller attractions. Add the wings to increase the height to 12’ and the width to 20’. Put the entire character on our Slayer Entry Pediment and your guests can walk under and through the opening to enter your attraction, making the over all animated character 20’ tall and 20’ wide. Put this incredible character out in front and make him the entrance to your attraction and he will instantly pay for himself in positive advertising, generating incredible word of mouth and news coverage.
GD40- The Slayer- Super Creature GD42- Wing Assembly for The Slayer GD44 - Entrance Pediment for The Slayer
GD20- The Impaler Animated Super Creature Seven different articulating movements bring this gigantic 13’ tall creature to life. The creature stands up & sits, head rotates, head tilts, mouth opens/ closes, right shoulder rotates, right shoulder raises/ lowers, right forearm raises/lowers. Left arm will support optional special Shredded Kicker that kicks its legs suspended from the creature.
GD24 Special Sheredded Kicker Animated character’s leg kicks as it is suspended from the creature.
UL506ATG SkeleDemon Animated Tower Guard
GD18 Giant Demon Animated Thrasher
UL505ATG Horned Demon Animated Tower Guard
Giant Demon An astounding sculpture of incredible detail and unbelievable scale. Our Giant Demon Thrashers’ entire 13’ tall body thrashes back fourth swinging its arms, snapping its head, lunging at your guests. Your patrons have never seen anything like this, this piece generates incredible word of mouth and is an unbelievable marketing tool to the local media for guaranteed exposure.
Page 33
CHR300- Jumpin Jack Axe- Ghoulish character stands on the floor with a small axe and a severed head, when activated character leaps from the floor to fly through the air and land on top of anything you put in front of him as tall as 48” axe swinging, head thrashing side/side and forward/back. CHR300COFS- Optional metal coffin on steel stand for Jumpin Jack Axe DEADTREEinternal structural steel covered in urethane, these really set the scene and are also ideal for hanging props. Modular design allows them to bolt together in minutes. Each one is hand made and no two are alike.
CHR302- Burning Bride Turn and Shoot- shredded bride stands with her back turned, when activated she turns and then fires flying through the air 5’ towards your audience, throwing her hands around violently plus multiple head movements.
CHR301- Undertaker Turn and Shoot- undertaker stands holding a shovel with his back turned, when activated he turns and then fires flying through the air 5’ towards your audience, jaw articulation for screaming and multiple head movements.
Page 34
CHR303- Twist in the Wind- weathered female corpse has been hanging around so long she’s mummified, when activated she screams to life with violent independent arm and head functions.
SkeleBlasters are the combination of two of our most popular pneumatic characters... the Skelerector and The Blaster. SkeleBlasters fold down on themselves and when activated violently spring up to full height Extremely fast and durable, easily hidden for a dramatic startle effect. Once up we have added the front/back & side/side head movements of a Blaster.
CHR305Wolf/Man SkeleBlaster
CHR304Peasant Woman SkeleBlaster
CHR306Mummy Lunging Blaster CHR307FunGui Lunging Blaster
Lunging Blasters combine Blaster head movements of forward/back and side/side with lung from the waist. Use them 2ways, slow and creepy for dramatically realistic creepy character movements or crank up the speed for a violent thrashing movement designed to really startle your patrons.
Page 35
CHR309EyeClops Lunging Blaster
CHR308Jack Ripper Lunging Blaster
CHR310Ernst Lunging Blaster
ZMB737Bog Frog Zombiette
ZMB739-CombOver Zombiette
Zombiettes- free standing electric characters whose upper torsos rotate in a creepy zombie circle, no air required. Hi-production value characters compliment any scene.
ZMB738Skank Zombiette
CHR311Two-Headed Hussy Lunging Blaster Page 36
GD70- The Pumpkin KingWhen the Pumpkin King is at rest it appears to be a small cluster of trees framing a Giant Jack-olantern. When activated The Pumpkin King Roars to life, the cluster of trees and vines actually transform to become The Pumpkin Kings’ arms, legs, chest and back as the character stands up to the incredible height of 17’. Character features (4) independent far reaching arm movements, head pan & jaw movement.
Page 37
Castle Big Skull This facade draws a crowd and puts your attraction on the map. It is entirely modular so you can configure it any way you like, which also allows to set it up and store it easily. Facade measures 20’ tall to the top of the Turrets.
FLAT
CBS100- Castle Big Skull- Facade Package- FLATPackage includes Entry Portal, Giant Fiberglass Skull, Skull back curtain walls, (2) 48” wide Skeletal Facing Walls, (10) 24” Turret Tower Sections to create (2) half Turret Towers
CBS101- Castle Big Skull- Facade Package- EXTENDEDPackage includes Entry Portal, Giant Fiberglass Skull, Skull back curtain walls, (2) 48” wide Skeletal Facing Walls, (4) 48” wide side curtain walls, (20) 24” Turret Tower Sections to create (2) Full Turret Towers and (2) half Turret Towers.
EXTENDED
EXTENDED Page 38
GD60- Scissor SerpentEasily concealed our Six Armed Serpent waits in hiding at a collapsed height of only 54”, but when activated quickly roars up to a height of 16’. Jaws snapping, head turning left/right & up/down. A terrifying spectacle of speed and scale.
Limited Edition- Phantom Roadster- HauntRodEvery Professional Haunter needs a HauntRod. Whether you use it as an advertising magnet to generate local news coverage or drive it in the local parade to advertise your Haunt pulling our Haunted Horse Drawn Hearse... park it out front of your Haunt to draw attention... take the kids Trick or Treating, heck it really doesn’t matter...anyone that has Haunting running through their veins will want this vehicle... it is a show stopper that will be the envy of anyone that sees it, hears it or even better....gets to drive it. Custom built from the ground up, the difference is in the details, every inch of this vehicle has been tricked out. Custom paint, hand cut engraved tombstone brake, clutch, gas, and side entry step pedals. Skull mirrors, hand laid webbing on the windscreen and wing supports. Radical knifed off side mounted exhaust pipes. Coachlamp LED Headlights & Taillights that illuminate candles mounted below. Tombstone Radiator, with upper torso of skeleton riding behind. Skull suicide shifter takes you through the standard 4-speed transmission. Ultra Dependable 200cc ThumpStar Engine with chain drive train is standard equipment. This is a Limited Edition model and we will only make 10 each model year. Order yours now, before there all gone....your choice of paint and graphics to advertise your attraction.
Page 39
ZMB77- Zombie Kong Zombiette-
GD77- Zombie Kong Overhead Attack-
At an astounding 13’ from the top of his outstretched hand to the bottom of his foot, this version of our Zombie Kong Gorilla has been design to hang off the side of a building, wall or tree. An electric motor supplies the panning head movement so no air or controllers are required. Use this Giant on the side of your attraction to generate media attention.
Our 11’ Tall Zombie Gorilla waits in hiding above your patrons heads in a passageway, as they make their way through he comes to life roaring above them, smashing his right arm down on top the passage, thrashing his head left/right as his articulate jaw roars.
RND102- Crow Corpse Table-
RND101- Autopsy SlammerA sheet covered corpse lays motionless on a steel table, nothing is exposed save the feet with the indelible toe tag. When suddenly the sheet covered character sits up looks around and then suddenly begins to violently slam and bang, throwing the entire weight of its upper body repeatedly against the table. sending patrons screaming for the exit.
Animated Crows feast on the fresh bloody remains of a hapless victim laid out on a steel table, pecking away at the eyeballs and intestines. A disgusting animated display of fresh gore.
Page 40
GD74- Winged MidEvil DragonThe detail, scale and fluid movements of our Winged Dragon make this piece an absolute show stopper. 12’ Tall Winged Dragon features (4) independent arm movements, hind leg pivots, independent wing movements, (3) independent neck movements, independent head and jaw movements. Tremendous organic artistic detail and a variety of realistic movements make this a must have.
GD75- Flying Rig for Winged MidEvil DragonThis incredible Ground based Flying Rig Raises and lowers Winged Dragon an incredible 20’ into the air, from a pick in the back of the character.
Page 41
FIX641- Shutter GhoulHideous Ghoul springs out thru Shutters when activated.
FIX641B- Shutter Ghoul BlasterSame as above with (2) additional Blaster Head Movements.
CHR288- Bugsy JaniTorA Spinning Lunging Blaster, this hooded character begins with his back turned and when activated spins to reveal and Insectual Head. Character lunges, has forward/back side/side head movements and features air blasts that fire from the mandibles and tentacles whipping violently and spraying air.
FIX643- Door Drop Panel Ghoul-
COF926- Coffin SkeleBlaster-
A boarded up six panel door hides our ghoul, when activated a panel drops allowing an opening for the ghoul hidden behind to come blasting through with head thrashing side to side.
Clapboard Coffin sits on a stand, when activated our Coffin SkeleBlaster fires up in a split second from the cavity hidden below. Character features forward/back side to side Blaster Head movement.
Page 42
ZMB726- Gordie Zombiette-
ZMB726- Bert Zombiette-
Zombiettes are free standing electric characters whose upper torsos rotate in a creepy zombie circle, no air required. High production value characters complement any scene.
CHR2012Lady in the Water SkeleBlaster
CHR2010Robert Plant Super SkeleBlaster SkeleBlasters are the combination of two CHR2011Leif Mealone SkeleBlaster
of our most popular pneumatic characters... the Skelerector and The Blaster. SkeleBlasters fold down on themselves and when activated violently spring up to a full standing position. Extremely fast and durable, easily hidden for a dramatic startle effect. Once up we have added the front/back & side/side head movements of a Blaster to make this our best character mechanism yet. Page 43
SPY101-Giant Spyder (7) function Giant Spyder with articulating legs, and feelers. Body measures 3’ wide by 6’ long, add the legs and our Spyder is 9’ across and 12’ long.
SPY102 Spyder Decendor Rig Adding our optional Spyder Decendor Rig allows our hanging Spyder to flip tail over head to descend 10’ feet into Attack position, with Fangs, Feelers, and legs thrashing towards your patrons heads. Depending upon available space Spyder can also be made to travel 8’ towards your patrons.
6’
CHR283- Headless HorsemanReplete with armor, a freshly severed head & a bloody broadsword our Horseman makes and imposing, terrifying figure perched on top of our Haunted Horse. Our Headless rider functions include pivot up/down at waist, upper torso rotation, fully functioning right sword arm including upper arm rotation, raise, forearm slash.
HODSADDLE- Vintage Saddle for Haunted HorseHODHORSE- Haunted HorseZombie horse rears up onto its hind legs to reach a standing height of 12’. Front legs kick independently, neck turns left/right, head throws up/down. Spectacular art/mechanics a thrilling large scale high production value piece. Perfect in front of our Haunted Hearse or Terrifying with our optional Headless Horseman rider.
Page 44
GRY207- Death StatueStanding to a height of 10’, when activated Death character lunges forward and down opening its arms, flailing its head left/right forward/back. An artist showpiece that will also scare the heck out of them.
CHR286- Armed & Dangerous-
CHR284- Captain Bones-
Six armed character features independent movement of each arm, as well as lung forward/back at waist and thrashing side to side head movement.
Based on our most unique character armature yet, this characters movement profile has to be seen to be believed. Character coils into itself making it very easily hidden. When activated character flies up, then out, then over, with thrashing head movement.
CHR283- Mr. Softy-
CHR285- Triple ThreatA Trio of Ghastly Ghouls stands lurking against the wall, as you approach each head starts to move as if watching you. As you get closer the three characters simultaneously launch themselves up into the air heads thrashing back/forward as the fly towards you and up over your head.
Page 45
6’6� Awesome Evil Clown character rotates at hips, turning the handle on his Jack-in-the-box, just waiting for someone to approach him. When activated screaming skull flies out of box at patrons.
FIX636- Psycho Shower Splatter-Full tub and shower enclosure hides our hideous female character. When activated character flies up and slams into opaque glass shower doors thrashing back/forth and side to side. FRN624-
Family Pack Frig-
Full size frig filled with freshly deceased body parts, that are still moving, heads turning, arms reaching and when activated a full size corpse flies out of the freezer compartment.
FRN624B- Family Pack Frig-Less Freezer Same as Family pack Frig less Animated Freezer door and animated freezer character.
FRN623Ring TVA non-descript TV sits on top of a small dresser. When activated glazed plexiglass screen drops with a crash and our Ring Girl flies up, out and down out of the front of the TV.
FIX637- Drop Window Mob-
Page 46
Opaque plexiglass window hides hideous mob hidden behind. When activated the plexi drops with a crash and all 5-characters fly through the opening with their heads thrashing back/fourth.
Lunging Blasters combine Blaster head movements of forward/back and side/side with lung from the waist. Use them 2-ways, slow and creepy for dramatically realistic creepy character movements or crank up the speed for a violent thrashing movement designed to really startle your patrons.
Skelerectors are pneumatic characters that fold down on themselves and when activated violently spring up to a full standing position. Extremely fast and durable, easily hidden for a dramatic startle effect.
Zombiettes are free standing electric characters whose upper torsos rotate in a creepy zombie circle, no air required. High production value characters complement any scene. CHR282- Ring Girl Lunging BlasterLunging Blaster as described above with the addition of arm movements that make the reach and raise arms over head.
CHR282P- Propulsion Rig for Ring GirlAdd our propulsion rig to your Ring Girls and she will glide forward/back, side/side, and pivot at the base a she performs her other undulation.
ZMB725- Ring Girl Zombiette-
CHR275- Bull Lunging Blaster-
CHR273- Male Lunging Blaster-
CHR276- Psycho Lunging Blaster-
CHR277- Pirate Lunging BlasterCHR2008- Pirate SkelerectorPage 47
CHR278- Zombie Lunging BlasterCHR2009- Male Zombie Skelerector-
HOD207 Pushout Character
HOD206 Corpse Twirlygig HOD208 Drop Down Character HOD209 Raiser Character HOD210 Creeper Character
HOD200- Catacombs- Scenic PackageAt over 520 sq. ft. our Catacombs is a scenic walk thru with scares built right into the walls. Every inch of every wall is hand styled with durable urethane skulls and scenic texture, making no two alike. Cabinets have highly detailed openings that beautifully accommodate full size corspes/actors. Scenic package includes: (3) 1-sided cabinets, (3) 2-sided cabinets, (7) cabinet end caps, (2) arch entry panels, (13) 1-sided 4’x8’ wall panels, (3) 1-sided spacer panels, (4) 2-sided 4’x8’ wall panels. HOD201- Catacombs- 1-Sided Cabinet- 30”x72”x96”tall cabinet with cutouts/image on 1-side includes shelving and back HOD202– Catacombs- 2-sided Cabinet- 30”x72”x96”tall cabinet with cutouts/image on 2-sides includes shelving HODENDCAP- Catacombs- Cabinet End Cap- 30”x30”x96”tall finished cabinet end cap
HOD203- Catacombs- Arched Entry/Exit PanelHOD204- Catacombs- 1-Sided 4’x8’ Wall PanelHOD205- Catacombs- 2-Sided 4’x8’ Wall PanelHOD206- Catacombs- Corspe Twirlygig- Spinning tower of Corpses includes AC Motor, characters and rig HOD207- Catacombs- Pushout Character- Pneumatic character pops out of cabinet with head movement HOD208- Catacombs- Drop Down Character- Pneumatic character hidden in top of cabinet drops down HOD209- Catacombs- Raiser Character- Pneumatic character raises and pivots up and out of cabinet HOD210- Catacombs- Creeper Character- Pneumatic character pushes itself out of cabinet with head movement Page 48
GD50-DemonKnight 9’ tall Animated Super Creature is Evil on Steroids, Independent control over 9-functions incl.- legs, arms, torso rotation, head turn, tilt and jaw. The most menacing character we have ever created. GD51- DemonKnight Propulsion RigGround based scissor mechanism propels DemonKnight to run or walk out at variable speeds a total distance of 11’ GD52- DemonKnight Saw Attachment Arm based weapon includes Saw mech, motor, and fake blade spins at 125 rpm with slip clutch, includes dc spark creator for special effect GD53- DemonKnight Severed Victim Victim of saw attachment, rag doll designed to
18’ tall
9’ tall
GD54- DemonKnight Facade Package 18’ tall and 21’ wide package includes (1)Entry Portal, (2) Tower Base, (2) Tower Mids, & (2) Tower Tops as described below. A massive architectural spectacle, use it with our DemonKnight or as the entrance to your attraction. All components comprised of bolt together solid steel under structure, wood sheathing outer shell, covered with polyfoam skels & detail, finally texture coated with weather resistant texture paint.
VORTEX- Deluxe Vortex TunnelDeluxe 20’ long 9’ diameter Vortex package features, welded aluminum rings, riggings & components, see thru grated (2) piece steel bridge, hand rails, lighting fixtures, high output motor & deluxe fabric. HODVORTEX- Vortex of Swilring CorpsesUpgrade kit to convert standard Vortex fabric into Swirling vortex of 3-dimenional Corpses.
Page 49
COF924- Deluxe Golden Casket18 ga steel casket with creme interior COF925-Dancing Casket RigPneumatic Dancing rig for Casket
HODHEARSE- Haunted Horse Drawn HearseBuilt from working Amish Horse drawn riggings, the mechanics of this Horse drawn Hearse make this the real deal, tubular steel frame, wood & polyurethane body panels, and durable plexiglass windows complete with custom drapery treatments, combined with Old World Oak wheels with ball bearing inserts and street rubber, custom leaf springs, and a cast iron fifth wheel allow the proud new owner to drive the Ultimate Hearse in promotional parades or park it at special events to generate first class advertising opportunities for your attraction. After you have used it promotionally incorporate this incredible working prop into your haunted attraction. A tremendous additional to any attraction that will surely appreciate with time. Each new owner receives custom “etched glass” transparency of their design for the side glass.
HODFIRE- Corpse Fireplace CompleteWood & polyurethane fireplace completely fashioned out of corpses. Incredible combination measures 118” tall x 75” wide. Package includes base, mantel, mirror w. 2-way glass, draperies & screen. Items Sold Separately below HODFIREB- Fireplace Base75” wide x 54” tall Corpse Fireplace HODFIREM- Fireplace MantelHODFIREM2- Fireplace Mirror w. 2-way glassHODFIRED- Fireplace DraperiesHODFIRES- Fireplace Screen-
Page 50
CHR252- Mutilated MobileCombination of the four animated characters described below, including steel mobile support. CHR253-Bond & GaggedAnimated character is suspended via hooks thru the head, wrists, & back. Character thrashes back/forth & up/down from abdomen. CHR254- FlailerAnimated character is suspended via hooks thru head, thighs, & wrists. Character thrashes violently via multiple animated movements flailing arms, legs, & head. CHR255- Hung Up to DieAnimated character is suspended via hooks thru mouth & biceps. Character thrashes wildly from the waist as upper torso twists left/right. CHR256- Hung Down to DieAnimated character is suspended via rod pierced thru ankles. Character thrashes wildly from the waist as upper torso twists left/right.
CHR253 Bond & Gagged
CHR254 Flailer CHR257- ScarionetteHuman body parts have been psychotically styled together into a wheel chair marionette. Strolling actor operated version requires actor to push the unit around and actuate the movements of the character by hand like a marionette. CHR257A- Scarionette Automated Pneumatic versionsame as above but all of the character movements have been automated with pneumatic cylinders & valves. Still allows actor to push unit with airlines. CHR257P- Scarionette Propulsion rigPneumatic cylinder, valve & rigging pushes the unit forward/back a distance of 52�
CHR252 Mutilated Mobile
CHR255 Hung Up to Die
CHR256 Hung Down to Die
CHR258- Kneeling BlasterChained & Bloodied, kneeling straightjacketed character thrashes violently back/forth & side/side screaming. An extremely realistic violent spectacle.
Page 51
FIX634- Dropping Wall8’ wide x 8’ tall wall splits in half and crashes to the floor with a horrendous whack! to reveal anything you put behind it. FIX635- Dropping Wall w. Lunging Mango8’ x ‘8 wall described above, revealing animated Mango character that lunges into opening with head thrashing left & right.
4’ CHR260-Body Bag Conveyor14’ track with trolleys suspends and moves (4) body bags 48” back and forth. Includes track, (4) trolleys, pneumatic pkg. Body bags sold below. SP308- Body Bag-static hangning CHR902- Body Bag Kicker- animated
FIX630- Drop Portrait BlasterPortrait drops with a thwack as character blasts thru opening screaming with head thrashing violently side to side. Includes pneumatic drop portrait, character, mechs, pneumatic pkg.
FIX632- Granny Bathtub Blaster- as violent upper torso rotation thrashes back/forth flailing arms. Includes tub, granny, mechs, pneumatic pkg.
Page 52
FIX633- Door SplatterGhastly Splattered Ghoul swings up and splats against plexiglass window in door and then slowly slides down glass. Smack-Startle then ooooh. Includes ghoul, door with plexi window, mechs, pneumatic pkg.
FRN621- ExoBed BlasterReposed possessed girl flails up to begin violently thrashing front to back side to side to swirl & contort atop the bed. Includes steel queen sized “mattress”frame , character, mech & pneumatic pkg. FRN621B- Optional Iron Bed AccessoryDecorative Queen size Iron Bed fits around mech above
FRN622- Easy Chair GhoulPerfectly camouflaged and lightning fast, Ghastly Ghoul Blasts thru the bottom of chair to stand 6’3” tall. They’ll never see it coming and this ones guaranteed to drop them. Includes, chair, ghoul, mech & pneumatic pkg.
CHR261- Thrashing HagFree standing Hag springs to life thrashing forward/back & side/side from the waist in a violent spectacle. Includes Hag, mech & pneumatic pkg.
Page 53
ZMB721- Ghouly ZombietteFree standing all electric character’s upper torso rotates in a creepy zombie circle.
CHR250- HalfOff Chained to a railroad timber, characters lower half falls to the ground as the upper half thrashes violently. Use with DemonKnight or your own chainsaw scene
ZMB722- Hag ZombietteFree standing all electric character’s upper torso rotates in a creepy zombie circle.
ZMB723- Creepy ZombietteFree standing all electric character’s upper torso rotates in a creepy zombie circle.
CHR251- HackOff Character and timber cut inhalf and flip back spilling the guts of the victim. Use with DemonKnight or your own chainsaw scene
Page 54
ZMB720- Siamese Twin ZombietteFree standing all electric character’s upper torso rotates in a creepy zombie circle.
CHR262- Flailing HagHag flails side/side & front/back from abdomen while suspended from pick in the back. CHR262D- Flailing Hag Dropping RigPneumatic pulley/cable rig drops and resets Hag a distance of 104”
Head Salad RD113
Lurker RD111
Half Bull
Jumper
RD115
RD114
Scalped RD112
Barfy RD110
Keefer
Skin Bones
Bo
HollyWood
RD108
RD106
RD107
RD104
The Rotting Dead Series The Rotting Dead are our top of the line characters. Each one begins with a fully cast skeleton, individual organs are added, followed by connective tissue and tendons, and finally skin, blood and hair is meticulously styled into place. A single RD character may contain more than 40 individually styled pieces.
Kristen RD101
Screamer SP312
Body Bag SP308
Hanging Ann Autopsy
Helena Handbag
Mrs. Chip Dip
SP307
SP305
SP302
Ripped Up Reba SP303
Headless SP313
SplatterSmock
Splitting Headache
Sheredded
Scooty
SP310
SP306
SP309
SP304
The Splatter Series
The Splatters get their name from the enormous amount of blood that goes into each piece. We begin with lifecasts of living models, various body cavities are exposed, organs are added, and then connective tissue, muscle, bone, blood and hair are added. A single SP character may contain more than 25 individually styled pieces.
The Ancient Dead Series The Ancient Dead are one piece foam filled latex corpses that are designed to represent mummified bodies that are hundreds of years old.
Scooty
Rey
Mumzy
Smog
AD203
AD204
AD202
AD201
Page 55
TLK100 Madame Isabella (10) function animatronic talking head. Used (2) ways- pre-programmed and recorded or operated Live interactive with a microphone and joy stick. Use Madame Isabella as a pre-Show to tell the tale of your attraction, pacing your patrons thru at a desired interval or use her as a stand alone second or side attraction. Charge extra admission for a seance side show before patrons go thru your main attraction. The Scarefactory will custom design a seance attraction just for you and your budget, making the entire room come alive to create an astonishing 5-10 minute seance allowing (1) operator to control live an entire room full of interactive special effects to astound and entertain your patrons.
TLK101 Madame’s Ball & Base TLK102 Levitating 60� TableTLK103 4800rpm Chair Vibrator -
TLK110 Lady Vanessa Talking Statue
TLK120 Colonel Buford Talking Statue
(8) function animatronic talking statues. Used (2) wayspre-programmed to say and do whatever you want or live interactive- actor controlled via microphone and joystick. Either way these beautiful pieces will startle, entertain and astound your patrons, in a pre-show to begin your show, in a side show, or anywhere you need a beautiful unique interactive special effect.
HODORG Evil Organ Prop Beautifully detailed gothic Organ adorned with skeletal components.
CHR225Haunted Knight Beautiful free standing suit of armor on wooden display stand. When activated visor flips back revealing skeletal ghoul whose head thrashes side to side screaming... shaking the entire suit of armor. A great set piece and a classic startle.
ZMB704 Chandelier Ghost Zombiette Ghostly character, hangs from chandelier, support arm moves in and out moving entire character and chandelier. Includes dressed and styled character, mount, and motor. Chandelier not included.
Page 56
ZMB705 Organ Miester Zombiette Seated Male Zombiette head slowly turns left to right, poseable arms. Includes dressed and styled character, and motor. Organ sold separately.
The Scarefactory proudly introduces Zombiettes- high production value characters combined with the simplicity, economy, and dependability of high torque ac motors. Take any Zombiette set it in your scene, plug it in and off it goes. We sourced the world over for the right manufacturer to create a 50inch lb ac gear motor to insure years of trouble free operation. The units even break down with no tools to fit into a small box for shipping and storage.
ZMB702 Gravely Zombiette
ZMB700 Male Zombiette Classic free standing male zombie, poseable arms, upper torso rotates in the creepy zombie circle.
ZMB701 Female Zombiette Female free standing zombie, poseable arms, upper torso rotates in the creepy zombie circle.
Our popular 6’6” tall Gravely reworked into a Zombiette free standing male zombie, poseable arms, upper torso rotates in the creepy zombie circle.
Female Skelerector CHR2006
Mossy Skelerector
Male Skelerector
Tombstone Jumper
CHR2005
CHR2007
CHR2004
SKELERECTORS Skelectors are pneumatic characters that spring a character from a folded height of 9” to a standing height of 6’ in less than 1/10th of a second. When reset these characters are virtually invisible, coming out of nowhere to be standing right in front of your patrons. Bury them Production Studios in Columbus, Ohio in the ground and cover them to create the effect of corpses literally blowingThe outScarefactory of the ground.
Page 57
FRN618 Slamming Dresser Super Skelerector Walnut stained 4-drawer dresser front panel slams down, allowing our 7’3” Ghoul to shoot thru the opening and stand up screaming, then reset. Unit includes dresser, character, steel track assembly.
FRN614-Dining Table Skelerector Dining Table complete with table cloth flys open as our Skelerector springs up and out from beneath the table. Includes steel table, top, table cloth, Skelerector, Pneuamtics.
FRN615Crib Skelerector Wooden Baby Crib sits apparently empty until our Skelerector springs up from under the sheets to startle your patrons. Includes Wooden Crib, Skelerector, pneuamtics.
FRN617 Canopy Bed Super Skelerector Beautiful full size canopy bed with wood accents and drapery trim springs open as our 7’10” Werewolf Skelerector flies out from underneath the sheets. Unit includes mechanical bed, canopy, animated character.
Page 58
CHR219 Fence Thrasher 6’6” tall animated character thrashes back and forth from waist. Head, arms and upper torso articulate. Includes free standing pneumatic character.
CHR215 Animated Iron CHR215 Animated Iron Maiden Maiden
CHR220 Grave Digger
Chained character’s arms 6’6” tall animated character thrashes back andChained character’s arms independently articulate, forth from the waist. Head, arms and upper independently articulate, thrashing the character up and torso articulate, lifting and then slamming thrashing the character up and inside iron maiden. down shovel. Includes free standing pneumaticDownDown inside iron maiden. Includes character, maiden. character and shovel. Includes character, maiden.
CHR215S Stand for above CHR215S Stand for above
Falling Scarecrow CHR210 Scarecrow falls forward and down to come face to face with your patrons. Includes character, mechanics, pneumatics
CHR212S Optional steel stand for character
Animated Suspended Skeleton CHR212 Fully articulated animated skeleton thrashes, kicks, pulls & lunges while suspended from (4) chains. Both arms, both legs, torso & head are articulated.
Page 59
animated characters- We have combined the realism of lifecast bodies with solid steel armatures to create thrashing characters with violent movements that are extremely durable for years of trouble free service.
Hangman Kicker
Body Bag Kicker
Sheredded Kicker
CHR901-
CHR902-
CHR903-
CHR228 He Blaster CHR227 She Blaster Free standing Female character with face hidden in hands, when activated head thrashes back and forth and side to side violently screaming. A truly astonishing spectacle, calm to chaos in 1-second flat.
Hanging pneumatic kickers kick and thrash when activated.
Sitting Male character slumped forward in chair, when activated head thrashes back and forth and side to side violently screaming. A truly astonishing spectacle, calm to chaos in 1-second flat. Chair not included.
Splatterpult CHR912 Bloodied sheet covered character springs screaming to a full standing position.
Autopsy Table Kicker CHR905-
Character thrashes back and forth on top of table.
Crawling Lurker CHR908Lurker riggles from side to side as he crawls towards your audience. Unit includes character, pneumatics.
Troy character mounted to 4x4, lower intestines thrash back and forth when activated. Unit includes character, stand, pneumatics.
Animated Troy CHR906Page 60
Barreel rises from barrel and takes bites out of Ann character hanging from gallows.
Barreel w. Hanging Ann CHR911
Louvered Closet doors thrash back and forth and then our incredible Reaper bursts thru open doors and flys up and over your audiences head.
DeathAngel Portrait Drops revealing Reaper that bursts thru portrait opening flying up and over your audiences heads.
Unit includes character, scissor lever steel linkage, hardwood doors mounted to steel frame, pneumatic pkg
Unit includes character, scissor lever steel linkage, drop portrait steel frame assembly, pneumatic package. Fireplace package includes faux brick chimney/firebox, mantel, surround and electric log.
Closet Extendor
Drop Portrait Extendor
FIX605
FIX602 -
Fireplace Package FIX605F -
Column Poppy FIX607 Poppy Character bursts up thru top of column then resets.
Shutter Descendor FIX604 Shutters slam, fly open sending our Undead character out & down at your patrons feet. Includes character, shutters mounted to steel frame, pneumatic package.
Shutter Extendor FIX603 Shutters slam, fly open sending our Undead character out, up and over your patrons heads. Unit includes character, shutters mounted to steel frame, pneumatic package.
Page 61
FIX701- Wolf Drop Portrait Blaster- Portrait drops with a Whack!!! as a ferocious Wolf lunges thru the opening, jaw snapping head thrashing. Fast easy and effective!
6’ 6’
FIX626 Mango thru Door A massive maniac waits behind a set of large rough hewn doors. When activated 9’ tall Mango swings forward violently throwing both doors open to loom directly over your patrons heads. This gag is large fast GD30 The Kreeper and furious. Doors measure 5’ wide by 9’ tall when closed. Mango is 9’ A fantastic sculpture of detail and scale, combined with a fully articulated tall and his arms span 10’. Includes doors, steel frame, & character. (7) function animatronic creature. Have full control over a walking talking 9’ tall creature. Movements include both arms, both legs, torso rotation, head/neck swivel, jaw.
GD31- Kreeper Propulsion Rig Add The Kreeper Propulsion rig to send The Kreeper walking/running over 9’. Ground based rig, uses scissor mechanism and easily supports character weight and movement.
GD32- Barrel Crash for Kreeper Crashing barrel rig crashes stack of (2) barrels to the floor and then automatically resets. A noisy startling effect that helps create the illusion that The Kreeper is on the rampage.
CHR281- Granny/WolfFIX638- Mirror SplatterTwo-way Plexiglass mirror hides ghoulish character that when activated appears behind the mirror slamming forward/back and side/side against the mirror and then disappears.
Granny sits relaxing in her favorite chair, until activated when Granny Flips, literally exposing our Thrashing Lycan thrashing up/down as head slashed left/right.
Page 62
HAUNTED FURNITURE
Animated Armoire FRN604 A total of 5-animated drawers thrash in and out in a programmed sequence and then our Poppy character is fired out of the units door.
Levitator accessory for Exorcist Bed FRN602L
Unit includes solid wood armoire, character, steel linkage, pneumatic package.
Exorcist Bed FRN602
Animated Dresser FRN603 A total of 5-animated drawers thrash in and out.
Our Exorcist Bed thrashes on a solid steel 360° simulator chassis. Your Actors can ride it or you may choose to add the Levitator option which safely and comfortably floats an Actor to a height of 5’0” up and down over the bed as it thrashes around.
Unit includes solid wood armoire, mirror, character, steel linkage, pneumatic package.
Unit includes solid steel chassis & bed frame, walnut stained four poster bed, pneumatic package. Levitator option includes padded steel cradle, pneumatic package & grip switch.
Dancing Dresser 5-Drawer FRN606 Dresser thrashes back and forth forcing drawers to slam in and out. Unit includes wooden dresser, pneumatic package, elastic drawer closure.
Bedolator FRN601
Dancing Dresser 4-Drawer FRN605 Dresser jumps and hops up and down. Unit includes wooden dresser & pneumatic package.
Our Bedolator utilizes our scissorlator action to propel our character from a lounging position to a height 5’ out and 8’ up and over your patrons heads. Unit includes bed, character, steel frame & linkage.
Page 63
Deskolator FRN608
Screaming Ghoul blasts thru top of desk from underneath blotter.
Screaming Poppy blasts thru top of trunk from underneath stack of folded shirts.
Trunkolator FRN607
Unit includes desk, character, pneumatic package.
Unit includes trunks, character, and pneumatics.
Chairolator FRN610 Leverlator action propels ghoul from sitting position 8’ up, out & over your patrons heads.
FRN620 Corpse in the Cabinet Classic Zombie character springs from indiscreet cabinet, swinging himself forward and doors outward, then quickly resets and waits for the next victim. Free standing design just place in the scene and go, cabinet stickers available. Use in office, hospital scenes, attic, anywhere a small cabinet might be.
Page 64
Unit includes sheet covered steel chair, character and pneumatics.
Graveyard Gate Combo Package GRY204 Combo Package includes (2) GRY200 Graveyard Gate Popups, (1) GRY201 Graveyard Gate Door Popout,(1) GRY202 Graveyard Gate Drop Panel
Graveyard Gate Popup GRY200 Hidden Ghoul thrusts up popping the top off of brick column. Includes column, character, mechanics, pneumatics.
Graveyard Gate Door Popout GRY201
Graveyard Gate Drop Panel GRY202
Hidden Ghoul thrusts up and out of door hidden in side of unit. Includes column, character, mechanics, pneumatics. Add Optional Light Kit GRY203
Cemetery Sign drops with a thwack revealing hidden compartment within. Add Optional Light Kit GRY203 Add Static Gate Character shown RD120
Cellar Knocker FIX613 Chained hatch doors thrash up and down. A loud violent effect. Includes steel frame and mechanics, pneumatics.
Economy Thrashing Coffin COF921 Chained clapboard coffin’s lid violently thrashes up and down. Includes coffin, chain, pneumatics.
Tombstone Reaper GRY205 Beautiful granite memorial topped with reaper. When unit is activated reaper floats down and forward off of tombstone. Includes tombstone, character, pneumatics.
Buried Alive SkelerectorChained Coffin doors at the top of the unit hammer back and forth from within until finally the character blows through the bottom of the unit revealing the decomposed remains of our grotesque victim.
Page 65
Buried Alive Skelerector BA2201
FIX621 Mausoleum Coffin Flip
The EconoCoffin
A track mounted steel coffin slams into hinged plywood mausoleum door. The coffin shoots out and tips forward with a loud crash, then coffin and door reset. Unit includes steel coffin, track & trolley assembly, automated door assembly. Unit shown with optional Gravely 6’6� poseable characterRD118
COF913
Character fires screaming out of apparently empty coffin from underneath coffin bed.
The Corpsextendor COF910 Character fires screaming out of coffin a distance of 4 feet.
The Corpselator COF903 Character fires screaming up out and over audiences heads.
The Corpsepultelator
The Corpsepult II
COF909
COF902
Character fires screaming up then out and over audiences heads.
Page 66
Character fires screaming from prone to standing position, then resets.
House of the Dead Tower Panel HODTOW -
House of the Dead Fascade Package HODPKG
House of the Dead Gable Panel HODGAB
House of the Dead Window Panel HODWIN -
House of the Dead Gate Panel HODGAT -
Package includes: (4)-Gable panels, (7)-Window panels, (6)-Gate panels, (7)-Tower panels The Scarefactory proudly introduces the House of the Dead modular ABS Thermo formed panel system. Each panel is 4’ x 8’ and formed out of a durable 1/8” ABS material. Panels are lightweight, tough as nails, highly detailed, and stack together eliminating any storage issues. Panels come prepainted and ready for hanging. Use indoors to create a high production value set or outdoors to create the Ultimate Haunted House Fascade. Panel details are designed to be mixed and matched to create a wide variety of fascades of any height or width on a 4’ scheme.
French Door Flyer FIX610 Gossomer Ghost hovers behind French Doors. When activated doors open and character flies out up and over patrons heads. Includes French Doors, Steel frame, mechanism, character, pneumatics.
Highly detailed fiberglass Skull is an incredible 12' from jaw to top of skull. Designed to sit on top of your attraction our Skull is translucent so that it may be lit from within. Bolts together in 4 pieces for shipping and storage.
12'0"
Car thru Wall FIX614 Lights on, Horn Blowing, Car blasts thru wall 3’ and then resets. Includes Car, headlights, horn, extensive steel frame, mechanism, pneumatic package.
Page 67
Giant Skull SCNSKL01
HOD100D Corridor of Corpses- Deluxe Pneumatic pkg An unbelievable combination of scenic detail, animated and motorized characters in one Corpse themed walk thru attraction. Every inch of every wall panel is detailed with 3-dimensional skeletal polyfoam characters and stone work. Everywhere you look motorized Zombiette characters have come alive and are embedded into the very walls. As you walk thru pneumatic scares attack you from every angle. The pkg includes (19) wall panels(12)HOD101, (4)HOD102, (3)HOD103 plus (14) motorized effects-(3)ZMB706, (2)ZMB707, (4)ZMB708, (4)ZMB709, (1) ZMB710, plus (7) pneumatic scares-(1)HOD104, (2)CHR233, (2)CHR234, (1)CHR23, plus (2) Static poseable Skeletal gate Characters, and CD-Rom sound track. Everything is modular so let The Scarefactory design a Corridor of Corpses specifically for your attraction floorplan and budget. Or you may wish to order Individual Corridor of Corpse components to integrate into your attraction. RD119 Poseable Skeletons HOD101 4’x8’ wall panel ZMB706 Rotating Upper Torso Zombiette ZMB710 Wall Hugger Zombiette HOD102 2’x8’ wall panel ZMB707 Panning Upper Torso Zombiette CHR233 Corpse Pushup- Pneumatic HOD103 Arched Entry panel ZMB708 4-Head Turning Zombiette CHR234 Corpse Flipup- Pneumatic HOD104 Zombies at Gate ZMB709 Arm Reaching Zombiette CHR235 Corpse Tilt- Pneumatic
CHR226 Goblin Jumper Excellent sculpture conceals ingenious free standing mechanism that causes crouching Goblin to quickly jump up and attack your patrons.
FLY1203 Floating Reaper Reaper character flies left/right up/down hovering above your patrons and then swooping down upon them. Perfect to fly thru an open window.
Page 68
CHR232 Pile of Bones Character Combo 6’ diameter 3’ tall polyfoam pile of bones. Bodies are highly detailed, dangly fleshy bits added and hand painted for realism w. our Lurker pneumatic character snaps up from a pushup position and our Gravely pneumatic character that flips up from a prone to sitting up position.
STROLLING TERROR Our line of Strolling Gags are spring actuated and designed to provide a truly portable Scare for Que lines, Midways or anywhere else within your attraction allowing your Actors to roam freely.
Strolling Baby Carriage SPR2009
Strolling Trash Can SPR2010 Strolling Wheelchair SPR2008
Walking Dead Kristen WLK2101
Walking Dead BeHeaded WLK2102
Springline Hospital Bed Skelerector SPR2011
THE WALKING DEAD "And the Dead shall Walk the Earth." We have taken our meticulously styled Rotting Dead Characters, outfitted them with wire armatures and have created a walking mechanism that will walk themWalking Dead taking alternative steps a distance of more than 48�. walking mechanism, pneumatic Skeleton Unit includes character, cylinder/valve package.
WLK2103
The Actors legs are hidden beneath the Hospital Bed and at just the right moment he releases the Skelerector that springs out from under the sheets concealing him. A dramatic effect that is sure to drop them in their tracks.
Page 69
Craven's Crypt A Haunted Shooting Gallery You and your party have stumbled into Craven's Family Crypt awakening Lord Craven, who does not tolerate unauthorized visitors to his final resting place. He commands you to leave and when you don't he summons his dead descendants to drive you from his crypt. 28 different Zombies reanimate before your vary eyes, blasting out of their crypts, the walls and even the floors, as their matriarch the Lord Craven commands them over and over to keep attacking you as you try and defend yourself against the coming horde. Each time you shoot, the zombies react and retreat only to regenerate and just keep coming until finally, the Lord Craven is ultimately defeated and he and his children must return to their final resting places until they can summon the strength to return. Theme Parks - Many ways to play… shots/time per dollar, group play to win a prize or as part of your redemption center. - Use this gallery all year round to not only produce tremendous revenue, but to also advertise in the pre-season your upcoming Halloween Event at your park. Haunted Attraction Owners - If there is one thing that every successful Haunted House has, it's a long que line out front where patrons wait…sometimes for an hour or more with little to do and without a compelling way of generating extra revenue for their operators. Haunted House operators have a built in captive audience, that are certain to be entertained and spend money waiting to go into your attraction. This is the ultimate que line entertainment, that Craven’s Crypt helps tell your backstory, while it generates extra A Haunted Shooting Gallery revenue at the same time. - Use the gallery throughout the year to generate off season revenue and advertise your attraction at regional Fairs and Festivals. What better way to make additional money in the off season, while at the same time driving new customers your attraction.
Gate Screen with Capital Upper Torso Wall Sconce Zombie Zombie Coffin Backstroke Walker w. Gates Zombie Flip and Stand
Craven’s Crypt
Coffin Cabinet
Zombie Coffin Swimmer
Cravens’ Altar w. Lantern Skels & Breakout characters
Altar Screen with Capital
Drop Panel Side Bureau w. Zombies 12’
Zombie Shoot and Stand
111”
Fully themed with compelling story & game play. Completely customizable to fit or promote your event. Modular design lets you control the budget and “get in” at the level that is right for you. Zombie theme is extremely popular with all ages & demos. You choose the number of guns and gallery footprint that works best for you. Zombie Coffin Backstroke
15”
11’
15’
13’4”
18’ 20’ with Gun Counter FACADE
Air Cannons 11’ Drop Panel Ghouls
Head panning Reapers with Electric Lantern
Zombie Coffin Swimmer
Zombie Flip and Stand
Zombie Ground Breaker Zombie Shoot and Stand
Do it yourself Shooting Gallery in a Box Also Available
Drop Panel Side Bureau w. Zombies Coffin Cabinet
36-month Financing available on this item Page 70
The Haunted Parlor A Haunted Shooting Gallery Drop Fireplace Ghoul
15
Skeleton Door
Ceiling Drop Ghost
14
Swinging Target w. Lightning
Peek-a-Boo Curtain
16
Shutter Ghoul
18
Drop Portrait Ghoul
13
11
16’
10 9
Bookshelf Ghoul
5
Chair Popup Skeleton
2
Banging Shutters
2’
Fortune Teller
Old Man
6
7
Ceiling Drop Ghost
4
Table Lamp Popup
Gun Counter 3-5 Guns 0'-2 1/4" 11’6”
Dresser Mirror 8 Ghost Dresser Ghost
Crystal Ball Ghoul 3
1
0'
Gallery includes: 3-gun 18-Animated targets state of the art shooting gallery system that is powered by a central computer that plays and mixes 5.1 surround sound in real time, tracks revenue with parameters for play, pricing, attract mode and more. 18 animated character/effects, all of the scenic details shown, theatrical lighting effects, duvetyne top and more. Game system can be configured with bill/coin acceptors, swipe cards and also dispense redemption tickets. * Add more guns to generate more revenue. Page 71
0 1/4'
12
Welcome to Madame Leona’s Seance Parlor. Patrons’ are promoted to insert money and press the start button. They then have 45-seconds or 18 shots to shoot the targets that reveal the various hiding places of the Ghost’s and Ghouls hiding in the Madame’s Parlor. Each target triggers an animated character/effect that activates the character with accompanying audio and lighting effects. The game is lighthearted and just the right blend of fun and fright for guests of all ages. This gallery employs simple movements that are built to last and will provide years of trouble free game play.
17
Hinged Portrait w. Air Cannon
TLK101 Madame’s Ball & Base TLK102 Levitating 60” TableTLK103 4800rpm Chair Vibrator -
FIX637- Drop Window MobFIX633- Door SplatterGhastly Splattered Ghoul swings up and splats against plexiglass window in door and then slowly slides down glass. Smack-
Opaque plexiglass window hides hideous mob hidden behind. When activated the plexi drops with a crash and all 5-characters fly through the opening with their heads thrashing back/fourth.
FIX636- Psycho Shower Splatter-Full tub and shower enclosure hides our hideous female character. When activated character flies up and slams into opaque glass shower doors thrashing back/forth and side to side. Cabinets with Banging Doors Screaming Ghoul blasts thru top of desk from underneath blotter.
FRN608
Zombiette
Drop Window Mob
Drop Window Mob
Deskolator
Zombiette Zombiette
Falling Potrack
Cabinets with Banging Doors
Air Cannon Mono Filament
Kitchen Set
Animated Drop Portrait
Family Pack Frig
FRN624B- Family Pack Frig-Less Freezer
Animated Banging Doors
Geriatric Walkers- these old coots have lost their Depends in a big way, in fact everything from the waist down is completely gone! But, that’s not going WLK101 to stop them from trying to chase after you!!! Disturbingly funny and Earnst Granpa Walker frighteningly realistic movements cause these characters to thrash back/force Animated and side/side as they attempt to propel themselves after their victims... Kicking .... don’t let them catch you! Page 3 Hanging EXIT Body
WLK102 Agnes Granma Walker
Zombiette
Same as Family pack Frig less Animated Freezer door and animated freezer character.
Oven/Stove Air Cannon
Unit includes desk, character, pneumatic package.
FRN615Crib Skelerector
Air Cannon
Animated Banging Door
Deskolator
Drop Portrait Blaster
Psycho Shower Splatter
Granm & Grandpa Walkers
Portraits
Drop Mirror Blaster
Hanging Bodies
Sink Bookshelves
Door Splatter
Poseable Skeletons
Poseable Skeleton
Hanging Bodies
Poseable Skeleton
Potty Actor Door Fake Windows
Zombiettes Poseable Skeletons
Drop Portrait Blaster
Actor Window Passthru
FIX630- Drop Portrait BlasterPortrait drops with a thwack as character blasts thru opening screaming with head thrashing violently side to side. Includes pneumatic drop portrait, character, mechs, pneumatic pkg.
FIX643- Door Drop Panel GhoulA boarded up six panel door hides our ghoul, when activated a panel drops Page 13 allowing an opening for the ghoul
CHR901-
CHR281- Granny/WolfGranny sits relaxing in her favorite chair, until activated when Granny Flips, literally exposing our Thrashing Lycan thrashing up/down as head slashed left/right.
Wooden Baby Crib sits apparently empty until our Skelerector springs up from under the sheets to startle your patrons. Includes Wooden Crib, Skelerector, pneuamtics.
Actor Door Black Fortune Curtain Teller Blaster
Air Cannon
Seated Blasters
Crystal Ball
Dining Table Skelerector
Actor Drop Portrait
Crib Skelerector
Levitating Table
Mono Filament
Door Drop Panel Ghoul
Hangman Kicker
Actor
Actor Window Passthru
Trunk Canopy Bed SuperSkelerector
Animated Bureau
Animated Banging Doors
Poseable Skeleton
Zombiette
Zombiette
Haunted Vacuum
Evil Organ with Organ Miester
Actor
Slamming Actor Armoire Passthru
Animated Drawers
FRN617 Canopy Bed Super Skelerector
Trunkolator
Beautiful full size canopy bed with wood accents and drapery trim springs open as our 7’10” Werewolf Skelerector flies out from underneath the sheets. Unit includes mechanical bed, canopy, animated character.
French Door Flyer
Corpse Fireplace
Lamps on Flashing Controllers
Exoed Blaster Chandelier Ghost
Easy Chair Ghoul
ZMB704 Chandelier Ghost Zombiette
Animated Drawers
Exorcist Bed
Lamps on Flashing Controllers
Poseable Skeleton
Actor Greeter
Zombiette
ENTRANCE
Ghostly character, hangs from chandelier, support arm moves in and out moving entire character and chandelier.
FRN614-Dining Table Skelerector Dining Table complete with table cloth flys open as our Skelerector springs up and out from beneath the table. Includes steel table, top, table cloth, Skelerector, Pneuamtics.
Screaming Poppy blasts thru top of trunk from underneath stack of folded shirts.
HODORG Evil Organ Prop Beautifully detailed gothic Organ adorned with skeletal components.
Levitator accessory for Exorcist Bed FRN602L
French Door Flyer
Exorcist Bed
FIX610 Gossomer Ghost hovers behind French Doors. When activated doors open and character flies out up and over patrons heads. Includes French Doors, Steel frame, mechanism, character, pneumatics.
FRN602
Trunkolator FRN607
FRN622- Easy Chair GhoulPerfectly camouflaged and lightning fast, Ghastly Ghoul Blasts thru the bottom of chair to stand 6’3” tall. They’ll never see it coming and this ones guaranteed to drop them. Includes, chair, ghoul, mech & pneumatic pkg.
HODFIRE- Corpse Fireplace CompleteWood & polyurethane fireplace completely fashioned out of corpses. Incredible combination measures 118” tall x 75” wide. Package includes base, mantel, mirror w. 2-way glass, draperies & screen.
FRN621- ExoBed BlasterReposed possessed girl flails up to begin violently thrashing front to back side to side to swirl & contort atop the bed. Includes steel queen sized “mattress”frame , character, mech & pneumatic pkg. FRN621B- Optional Iron Bed AccessoryDecorative Queen size Iron Bed fits around mech above
ZMB705 Organ Miester Zombiette Seated Male Zombiette head slowly turns left to right, poseable arms. Includes dressed and styled character, and motor. Organ sold separately.
Page 29
Animated Creeper Characters
Programmed Flashing Lights
Window Popup
Floating Reaper Flys above Entry
Animated Creeper Characters
Animated Creeper Characters
Programmed Flashing Lights
Zombiettes
Swirling Ghouls in Windows
Animated Window Splatter Character
Animated Banging Shutters Programmed Flashing Lights
Facade Elevation
Animated Characters Burst from Window
Animated Banging Shutters
Animated Gates with Skeletal Characters
Drop Panel Ghoul
Complete Modular AttractionsPage 72
Our Exorcist Bed thrashes on a solid steel 360° simulator chassis. Your Actors can ride it or you may choose to add the Levitator option which safely and comfortably floats an Actor to a height of 5’0” up and down over the bed as it thrashes around. Unit includes solid steel chassis & bed frame, walnut stained four poster bed, pneumatic package. Levitator option includes padded steel cradle, pneumatic package & grip switch.