VESPA WIDEFRAME

Flywheel fan MMW aluminium CNC PINASCO Flytech Vespa V15-33, VM, VN, VL, VB1, VGL1, GS 150, ACMA V51-57, ACMA GL

CNC-milled aluminium fan wheel from the renowned company MMW. In contrast to the original plastic fans, the aluminium wheel is indestructible and also offers improved cooling performance due to the CAD-calculated fan blades, without any loss of performance.

part no. 3332491 159.00 €

Primary gear repair kit BGM PRO with reinforced springs Vespa VM, VN, VL, VB1, VGLA (-29961)

helical gears, Ø = 108 mm part no. BGM0194 20.90 € straight gears, Ø = 104 mm part no. BGM6262WRP 38.90 €

reinforced spring (1 pc.) part no. BGM0194S 2.90 € Air filter BGM RPO by Marchald for Polini CP carburettors Ø = 17,5-19-21-23-24 mm CS Ø = 46 mm, L = 30 mm

part no. BGM4490 35.90 €

Advantages: · quick and easy to install, washable · high filter performance and optimized air flow through high-quality double layer high-tech foam · elaborate sealing edge, absolutely airtight sealing of the adapters, therefore no secondary air · moisture resistant - even if completely soaked, the filter does not need to be replaced · thanks to the extremely flat design, it can also be used very well in places with little space · integrated intake funnel for best flow

Exhaust RR-BOX ROAD RACING The look of the original exhaust has been almost maintained, but the performance values correspond to those of a modern two-stroke resonance system. Only with such an exhaust can the full potential of a tuning cylinder be explored. But it also offers a considerable performance plus on original engines.

Vespa VM, VN, VL, VB1, VGL1

· significant performance improvement · O-ring seal in manifold · spring-loaded elbow · rich sound · incl. springs and retaining plate part no. 3332385 173.00 €

Vespa GS 150 (VS2-VS5)

· significant performance improvement · screw flange for GS 150 cylinder · wheel change without disassembly · rich sound

Bearing and oil seal set BGM /CORTECO for Crankshaft, turned-off Vespa VM, VN, VL, GS 150

part no. BGM1112 61.99 € Cylinder kit 150 cc BGM PRO Vespa VM, VN, VB1, VGL1, VL1

bgm PRO tuning cylinder with 150 cc at 57 mm stroke for all 2-channel engines. The cast cylinder has three overflow valves and is suitable for all wideframe engines with 57 mm stroke. On the 125 cc engines with 54 mm stroke the cylinder with the 57 mm crankshaft fits without any problems. The third port on the cylinder is closed and the cylinder is flushed through a corresponding recess in the piston. This means that no modifications to the engine housing are necessary.

part no. BGM1550 336.00 €

Spacer BGM PRO for clutch cover, Ø = 128 x 1,5 mm Vespa VM, VN1 (-06000), VU, ACMA V53-V57, GL, MV 125 N + 125 S Intake manifold BGM PRO Ø = 24 mm, fits on Dellorto PHBL24/25, Polini CP23/24 Vespa GS 150

part no. BGM2580 59.90 €

part no. BGM8310 11.19 € Gasket for Spacer BGM PRO Ø = 130 mm Vespa VN1 (06000-), VN2, VL, VB1, ACMA GL GL (1956-‘58)

part no. BGM8311L 3.59 €

Voltage regulator 4-plug BGM PRO 12V AC/DC Compact voltage regulator for all alternators with 12 Volt. The regulator supplies alternating current and optionally also direct current. It enables a modern extension of the existing on-board power supply. The connection to the existing wiring harness is very easy. With complete AC systems, only the regulated AC current has to be applied to the cables for the electrical consumers. In systems that are operated with AC and DC, a distinction only needs to be made between AC and DC and the wiring must be wired accordingly. RRP, all prices include 19% VAT.

Shock absorber bracket RICAMBIO RAPIDO lower engine Vespa V1-15, V30-33, VU, VM, VN1T (-06000), Hoffmann A-HC, ACMA V51-57, ACMA GL

part no. 7674935 14.50 € Shock absorber BGM PRO SC/R1 SPORT rear, 385 mm, black Vespa VM, VN, VL, VB1, GS 150

Just as important as a powerful engine are the right chassis and well-functioning brakes. Our bgm PRO shock absorber was developed specifically for the Wideframe Vespas. It fits as a direct replacement on all models from 1955 onwards. Up to model year 1954 the damper and spring are separate and do not form a unit. The upper shock absorber mount of the later models provides a remedy. We offer this separately and therefore the bgm PRO shock absorber can be installed in the early models as well. Rebound

Shock absorber bracket VESPA upper mounting/frame Vespa VN1 (6001-), VN2, VL, VB1, GS 150

part no. 7677031 48.00 € Shock absorber spring „Sto“ STOFFIS GARAGE reinforced, front, L = 155 mm Vespa 125-150 (8 inch)

part no. 7300108 34.99 €

Shock absorber BGM PRO SC COMPETITION Vespa Wideframe

black part no. BGM7761B

silver part no. BGM7761S

139.00 € each

grey part no. BGM7776 black part no. BGM7776B silver part no. BGM7793 Shock absorber BGM PRO F16 SPORT Front shock absorber from bgm PRO with 16x Pressure stage regulation.

· developed as upgrade for all Vespas with separate shock absorber and spring unit · direct replacement, therefore easy to install · no modifications necessary · wide adjustment range of the compression stage · so you can perfectly adjust the compression speed to your riding style · hard anodized CNC-housing

and compression stage of the damper are perfectly pre-tuned. The spring preload can be adjusted continuously. Both upper adapters (M8 and M9) are included in the scope of delivery, which were originally mounted model-specific. So that everything fits when mounting, the rear bgm PRO shock absorber is adjustable in the total length from 385-420 mm.

Only shock absorber on market for Wideframe models with E-mark!

part no. BGM7755B 199.00 €

Screw VESPA DIN 931 M9 x 59 mm, for shock absorber/ lower engine bracket Vespa V1-15, V30-33, VM, VN, VL, VU, VB1, GS 150

part no. 7673903 3.39 €

part no. 7677047 9.99 €

Screw set VESPA 2 x M9 x 59 mm + 1 x M9 x 55 mm for shock absorber/lower engine bracket Shock absorber CIF Vespa VN, VM, VU, VL

part no. 7671486 92.95 €

Brake drum BGM PRO cast iron 8“ Vespa Wideframe (w/o GS 150 + ACMA GL)

Brake shoes BGM PRO 8“ rear Ø = 127 x 20 mm, for brake drum BGM5310

To ensure the best possible braking performance, there are brake shoes adapted for the rear bgm-PRO brake drum. These are also available with two mounts for converting a large frame motor to 8 inch.

1 anchor pin Vespa Wideframe (w/o GS 150), Hoffmann, ACMA part no. BGM5310BP 2 anchor pins for conversion of large frame engine from 10 to 8 inch part no. BGM5310BP2 front part no. BGM5300 86.90 € rear part no. BGM5310 96.90 €

· significantly better heat dissipation thanks to cooling fins · perfect concentricity through exact centering over the wheel shaft, tolerance 0.02 mm · considerably more stable due to greater overall wall thickness · additional reinforcement through cooling fins · no brake fade under continuous load · suitable for original and tubeless rims

Brake drum set BGM PRO cast iron rear brake drum, brake shoes, 1 anchor pin Vespa Wideframe (außer GS 150)

part no. BGM5310KT 105.90 € RRP, all prices include 19% VAT.