VESPA SMALLFRAME

Reinforced racing clutch BGM PRO Superstrong incl. clutch pressure plate, Made in Germany

Engine ball beaing set SC conversion to ETS crankshaft Vespa V50, PV, ET3, PK S, PK XL

part no. 3730011 41.90 € Further ball bearing sets are available in our online shop www.scooter-center.com Vespa V50, PK S, PK XL part no. BGM8050V 219.00 €

Vespa PK XL2 part no. BGM8050 229.00 €

For further clutches visit www.scooter-center.com

Multiple gear cluster BGM PRO with needle roller bearing, type PK XL2 fits Vespa Smallframe (all models)

part no. BGM8015 37.90 €

Carburettor sets DELLORTO 19/19 mm SHB Vespa V50, PV, ET3 (2-hole) part no. 1510022 88.00 €

Vespa PK S (2-hole) part no. 1510023 151.00 € Vespa PK XL (3-hole, not ill.) part no. 1510024 131.00 €

Gear selector BGM PRO round, 4-speed, h = 50 mm Vespa V50 (V5A1T from 69444), V50 Special (V5B3T from 94315), V50 Elestart (V5B4T from 1514), PV (VMA2T from no. 150203), ET3 (VMB1T from 8161), PK

part no. BGM6550 54.90 €

Small primary gear BGM PRO 16 teeth Vespa V50 (4-speed), PK 50 S-XL

part no. BGM01800 41.95 € Kickstarter sprocket BGM PRO teeth 12/10, Ø = 20.5 mm Vespa Smallframe (except PK XL2)

part no. BGM62010 18.90 € part no. BGM1214 23.95 € Engine gasket set BGM PRO silicone, incl. O-rings, Made in Italy Vespa Smallframe (all models)

Perfect for all cylinder kits with 75 cc displacement. Speed increases by 10 km/h and in case of speed reduction the engine will not be fully loaded. The bgm PRO silicone gaskets are made of high-quality 0.5 mm thick gasket paper (like the genuine Piaggio green gaskets) and are also provided with a coat of silicone sealant which ensures a higher surface pressure of the gasket. Thanks to the permanent elasticity of the silicone sealant, the gasket also allows for a better sealing of the cold engine and prevents oil leak.

part no. BGM6668KT 32.95 € Ignition set BGM PRO Conversion to electronic ignition, with 12 V voltage regulator AC/DC and genuine Ducati redor Vespa V50-V90, PV, ET3, PK S (with tapered cone/19 mm)

part no. 7673183 259.00 €

Wiring loom set for conversion BGM PRO AC conversion to electronic ignition, incl. light switch

Vespa V50, PV, ET3 part no. 9077011 45.90 €

Pair of reinforced engine silent blocks BGM PRO Vespa V50, V90, SS 50, SS 90, PV, ET3, PK S, PK XL

part no. BGM7955 25.90 €

Bearing and oil seal set BGM PRO for crankshaft, 19 mm, tapered cone 1 x 6303 + 1 x 6204, incl. O-rings + 3 oil seals Vespa V50, PV, ET3, PK S

part no. BGM1107 31.99 € Vespa V50 Special part no. 9077011S 56.90 €

Also available for conversion to Vespatronic.

Gearbox oil BGM PRO Street Vespa SAE30 AP1 GL 3, 250 ml

part no. BGM2025 4.90 €

Engine repair set OEM QUALITY NU204, Vespa V50, V90, PV, ET3

part no. 7675842 140.90 € Gearbox shim set BGM PRO 0.90-1.40 mm (+0.0 /- 0.04 mm) Vespa Smallframe (all models)

part no. BGM6020KTL 27.90 €

Engine casing GP ONE CNC Ø webs = 88.00 mm Vespa Smallframe (all models)

part no. 7674577 1486.00 €

Cylinder D.R. 133 cc 3 transfer ports Vespa PV, ET3, PK 80-125 part no. 1310005 153.00 €

Cylinder POLINI 133 cc Evo Vespa PV, ET3, PK 125

part no. P1400211 377.50 € reed valve, 51 mm stroke (not ill.) part no. P1400212S5 519.00 € Engine casing LML SE125 large timing ports, with electric starter Vespa PK 50 HP, PK 50 XL2, PK 125 XL2, ETS

part no. 3331617 329.00 €

Adapter set for gear change cable PK XL2 for conversion to PL170-/ SE125 casing Vespa PK XL2

part no. 3330134 8.90 €

Cylinder QUATTRINI M200 for Quattrini engine casing C200 (part no. 7676556 - 669.00 €) Vespa V50, PV, ET3, PK

part no. 7676558 679.00 €

Cylinder POLINI cast iron 75 cc Vespa V50, PK 50 Tuning kit POLINI 75 cc touring set, 65 km/h (plug&play) Vespa V50, 50N, PK 50 S, PK 50 XL part no. 3330374 161.90 €

Cylinder POLINI cast iron 102 cc Vespa V50, PK 50

102 cc part no. 1010005 85 cc Sport part no. 1010004

149.90 € each

V50 (not ill.) part no. 7673621 Vespa PK 50 S part no. 7673619 519.00 € each

Cylinder POLINI cast iron 112 cc Vespa V50, PK 50

part no. 1010006 167.90 €

Racing crankshaft BGM PRO RAGING for redary valve

Conrod bearing BGM 12 x 17 x 15 mm, needed for all cylinders from 75 cc Vespa V50, PK 50

part no. BGM0334 9.95 €

Racing crankshaft BGM PRO RACING for reed valve intake, full circle web, Ø 24 mm cone Vespa PK 125 XL2, ETS Vespa PK 50 XL (Ø 20 mm cone) part no. BGM2400 97.90 €

Vespa V50, PK 50 S (Ø 19 mm cone) part no. BGM2403 99.90 €

Please note: for crankshafts with 54 mm stroke it is necessary to mill the engine casing!

97 mm conrod, 51 mm stroke part no. BGM2405

105 mm conrod, 51 mm stroke part no. 7673153

105 mm conrod, 54 mm stroke part no. 7673152 Racing crankshaft set BGM PRO RACING full circle web, 105 mm conrod, Ø 24 mm cone Vespa PK 125 XL2, ETS 51 mm stroke part no. 7673185