Why You Usually Find PTAC Units In A Motel Package terminal air conditioning units, better known as PTAC units, needs to be available for guests in every hotel room. This allows visitors to quickly adjust the AC and keep cool during the summer season and warm months. The hospitality industry is all about offering a more comfortable stay to their guests and a PTAC unit enables them to do that conveniently. The units are built to withstand rough outdoor environmental conditions, and more modern models are designed with energy efficiency in mind. It is a given that 5 star hotels and luxurious inns should have an adjustable AC in each and every room. In terms of improving customer satisfaction, even less expensive motels if they haven't already thought of it, should. It's important to perform regular inspections of the units to ensure everything is working properly. Those having a problem will not be able to emit cool air and they might have some type of noise when they are running. Among the top guests complaints actually would be these particular concerns. Take the following information and facts into consideration when wanting to replace the current units with something better. Heat Options Usually there would be two heating types of air conditioners which are the electric or heat pump. The former uses electricity along with a heating element to heat the air; a fan is used to spread the heated air into the environment. A reverse cooling cycle is used or even a heat pump to convert cool air into heat. Some units incorporate one method along with the other reserved as the backup. BTU Power In various degrees of power the HVAC system will come which is measured in BTU also known as British Thermal Units. While it creates a higher output, it's not always the best option to go with the one that has greater BTUs. The size of the area will normally establish what BTUs are needed. For instance, in a huge room you will need a unit with higher BTUs otherwise it will work much harder to achieve the desired temps and would increase the amount of energy needed to run as well as wear out prematurely from working so hard continuously. Conversely, those that have higher BTUs installed in a smaller room can create a lot of humidity given that they do not run proficiently leaving a clammy and damp surroundings. For a 300 square foot area, a PTAC unit with 7,000 BTUs is adequate. Put in another 2,000 BTUs for every additional 100 square feet of space. Electrical Requirements PTAC units are good sized and require more voltage than the standard 115-volt outlet is able to provide. Be sure each room in your facility is wired to handle the voltage specifications. About 220-240 volts are necessary for the standard AC system so make sure you have that.
Best Hotel Products, Inc
Page 1