storage S e a n L i n
Tuesday, March 13, 2012
9.2
plan S t a g e :
Tuesday, March 13, 2012
plan S t e p
B y
S t e p
Measure and Mark the wood using pencil and a ruler
Using a table saw, cut wood into specific sizes
Mark out the grooves using a pencil and a marking gauge
Make the grooves using a wood router
Glue the pieces together.
Wax the wood using a buffer
Sand and file wood pieces using file and sand paper.
Make mitre joint using a sander
Tuesday, March 13, 2012
gantt c h a r t
Tuesday, March 13, 2012
tools& equipments Sander
Metal work vice
File
Table Saw
Tuesday, March 13, 2012
Marking Gauge
Calipers
Glasses
Buffer
Wood Router
Belt Sander
plan E v a l u a t i o n
During the plan stage, I created a plan that will guide me through my product making. I think my plan is detailed and can be followed by other students and other people. This is because, in my gantt chart, I listed out all of the steps and a estimated time needed. I also stated out what tools will be needed during the different steps in my step by step plan. I also used images to support the plan therefore giving the audience a clearer picture of how the tools are being used. I also think my plan is created realistically because my gantt chart shows a realistic order of steps and the timing is long enough for someone else to complete. Overall, I created a realistic and detailed plan that will allow me and the others to follow in order to create my product.
Tuesday, March 13, 2012