2014
BIG BIKE BOOK TOOLS
Lubricants & Care Products - Degreaser
Tools
Lubricants & Care Products - Degreaser Aerosols and certain fluids considered to be hazardous materials cannot be shipped by air. They can only be shipped by ground transportation.
Finish Line 1-Step Cleaner & Lube
Finish Line’s 1-Step is engineered for commuters and recreational cyclists who seek a quick one-step clean and lube formulation. As 1-Step loosens and removes surface grime, it delivers a clean low friction film of lubricant. 1-Step Cleaner & Lubricant prevents premature component wear while reducing pedaling friction and drive-train noise. SKU
Size
142744 4 oz 142745 6 oz 133039 12 oz
Dispenser
MSRP
Drip Aerosol Aerosol
$7.99 $8.99 $11.99
142744 1-Step Cleaner & Lube
Finish Line Chill Zone Penetrating Oil
Chill Zone loosens and lubricates rusted bike parts like: a frozen crank bolt, a rusted derailleur spring, or a seized seat post. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone features special refrigerant / propellant that freezes metal as low as -50°F/-45°C. This causes contraction of the metal and creates micro-cracks in the rust. A penetrating release agent then breaks down and flushes out the rust. SKU
Size
Dispenser
MSRP
157664 6 oz
Aerosol
$9.99
119608 Citrus Degreaser
Finish Line Citrus Degreaser
Cuts through grime like no other solvent, with a fresh citrus scent. *Land ship only. SKU
Size
119608 12 oz 123190 20 oz 119607 1 gal.
Dispenser
MSRP
Aerosol Bottle Jug
$9.99 $13.99 $99.99
Finish Line Multi Degreaser
Unlike citrus degreasers, will not damage rubber or plastic. Natural, nontoxic, and biodegradable. SKU
Size
103870 12 oz 123191 20 oz 120327 1 gal.
Dispenser
MSRP
Aerosol Bottle Jug
$9.99 $13.99 $69.99
103870 Multi Degreaser
Finish Line Speed Clean
Features two advances in cleaning chemistry. Strips all grime off quickly. Cleans w/ no oily residue left over, evaporates for a workable surface. SKU
Size
131725 17 oz
Dispenser
MSRP
Aerosol
$11.99
131725 Speed Clean 800-283-2453
567
Tools
Lubricants & Care Products - Degreaser
Park CB-2 Chainbrite Cleaner
100% biodegradable, promotes smoother shifting, flip top lid for easy pouring. 16 oz. *Land ship only. SKU
Model No.
132252 CB-2
132252 CB-2 Chainbrite Cleaner
102495 OrangePeelz Degreaser
Size
MSRP
16 oz
$12.95
Pedro’s OrangePeelz Degreaser
Citrus-based degreaser penetrates quickly to removes stubborn grease and grime for quick cleaning of all non-painted surfaces. Low surface tension insures superior penetration into hard-to-reach areas. SKU
Size
102495 16 oz
Dispenser
MSRP
Bottle
$14.00
Simple Green Bike Cleaner
Simple Green bike cleaner is a non-toxic, biodegradable, non-corrosive and nonflammable cleaner specially formulated to meet the cleaning and maintenance needs of today’s riders. Foaming formula sticks to vertical and horizontal surfaces while removing grease, oil, dirt and road grime from chains and other components. Land ship only. SKU
Size
124619 20 oz 158934 24 oz
124619 Bike Cleaner
140392 Foaming Citrus Cleaner Degreaser
Dispenser
MSRP
Aerosol Trigger
$9.99 $9.99
Tri Flow Foaming Citrus Cleaner Degreaser
Quickly clean and degrease the dirtiest drivetrains and parts. The powerful foaming action loosens grease, oil and hardened deposits leaving surfaces clean and residue free. This water-soluble, biodegradable, citrus-based formula can easily be rinsed with water. Foaming formula sticks to where it is sprayed. Use for those really tough cleaning jobs. SKU
Size
140392 10 oz
Dispenser
MSRP
Spray
$12.24
Tri Flow Rapid Clean
Tri-Flow Rapid Clean is an all purpose cleaner that degreases and removes oils, dirt and mud w/ no contaminant-attracting residue or solvent runoff. Cleans surface and evaporates dry. SKU
Size
140393 15 oz
Dispenser
MSRP
Aerosol
$11.52
WD-40 Bike Heavy Duty Degreaser
Safely dissolves and removes grease from frames and drivetrains. Thick, biodegradable formula clings to surfaces for effective cleaning. Safe for carbon fiber, titanium, aluminum, steel, chrome, rubber or plastic. 140393 Rapid Clean
568
158652 Heavy Duty Degreaser
SKU
Size
158652 20 oz 159596 1 Gallon
Dispenser
MSRP
Bottle Bottle
$14.99 $54.99 SEATTLEBIKESUPPLY.COM
Lubricants & Care Products - Grease
Tools
White Lightning Bamboo Cycle Wipes
White Lightning Bamboo Cycle Wipes are tough and tear resistant. They have a waffled texture that absorbs more grease and grime than ordinary wipes and are treated w/ a solution that is strong enough to clean a bicycle chain, yet safe enough to clean hands. Use one Cycle Wipe to clean an entire bicycle including the frame, drivetrain, bars, stem, and saddle. Or clean your hands after a repair on a dirty machine. Bamboo Cycle Wipes are a sustainable and renewable resource, and are biodegradable. SKU
Quantity
MSRP
157672 6 / Box
$5.99 125682 Clean Streak Metal Prep
White Lightning Clean Streak Metal Prep Breaks down oils and grease, works rapidly, dries completely, leaves no residue. SKU
Size
125682 12 oz 133071 23 oz
Dispenser
MSRP
Aerosol Aerosol
$9.79 $12.99
Lubricants & Care Products - Grease Aerosols and certain fluids considered to be hazardous materials cannot be shipped by air. They can only be shipped by ground transportation.
Finish Line Anti-Seize Assembly Lubricant 3 Pkg Specially formulated anti-seize compound that prevents galling and cold welding of titanium components. Also works great as a conventional anti-seize for metal parts. SKU
Dispenser
132936 Anti-Seize Assembly Lubricant 3 Pkg
MSRP
132936 Tube
$4.99
Finish Line Ceramic Grease
Ceramic Grease represents Finish Line’s most advanced bearing lubrication technology. Formulated w/ sub-micron ceramic particles and premium non-toxic synthetic oils. Designed to optimize the performance and extend the life of bottom bracket, hub and headset bearings. SKU
Size
140077 2 oz 140078 1 lb
Dispenser
MSRP
Tube Tub
$7.99 $25.99
Finish Line Extreme Fluoro Grease
Extreme Fluoro Grease is made w/ 100% pure DuPont fluorinated ingredients. Recommended for precision parts and especially bearings (including ceramic). Perfect for those seeking a significant drop in friction and maximum protection against extreme pressures and/or extreme rotational heat. Also works great on cable wires, derailleur pivots, stanchions, gaskets, pedal springs and as a 'clean' alternative to conventional anti-seize compounds. SKU
Size
157668 20g
800-283-2453
Dispenser
MSRP
Syringe
$14.95
140077 Ceramic Grease
569
Tools
Lubricants & Care Products - Grease
Finish Line Fiber Grip Carbon Assembly Gel
Fiber Grip has been designed to create friction and reduce slippage between clamped carbon surfaces. Apply Fiber Grip to clamping areas of: Stems; Handlebars; Seat posts, and Seat tubes. SKU
Size
140076 1 lb 140075 1.75 oz
140076 Fiber Grip Carbon Assembly Gel
130884 Grease Gun
Dispenser
MSRP
Tub Tube
$34.95 $7.99
Finish Line Grease Gun
Fits all standard 9/16" grease tubes. Long-reach nozzle, carded. Grease not included, nozzle only. SKU
MSRP
130884
$21.99
Finish Line Premium Grease
Totally repels water. Extends bearing life. Won't thicken in cold. SKU
Size
119318 1 lb 100411 3.5 oz
Dispenser
MSRP
Tub Tube
$21.99 $3.99
FSA Carbon Installation Compound For use w/ carbon parts and accessories. SKU
100411 Premium Grease
139347 Carbon Installation Compound
Size
MSRP
139347 5g 139348 80g
$6.99 $29.99
Park ASC-1 Anti -Seize Compound
Reduces friction in threaded and press fit connections. Ideal for BB and pedal threads, pressed headset cups, seatposts... etc. Also helps prevent corrosion. 136868 ASC-1 Anti Seize Compound
118700 Polylube Grease
SKU
Model No.
136868 ASC-1
Size
MSRP
4 oz
$8.59
Park Polylube Grease
The synthetic base has extremely high load carrying capabilities. SKU
Model No.
118700 PPL-1 118701 PPL-2
Size
Dispenser
MSRP
4 oz 1 lb
Tube Tub
$5.95 $15.95
Park SAC-2 Supergrip Carbon & Alloy Assembly Compound
Helps create a tighter grip between two slippery surfaces. Ideal for carbon, aluminum and steel seatposts, handlebars and stems. 4 oz. (118 ml) tube. Note: Not for threaded surfaces. Do not use for bearing lubrication. 151529 SAC-2 Supergrip Carbon & Alloy Assembly Compound
570
SKU
Model No.
151529 Sac-2
MSRP
$11.95 SEATTLEBIKESUPPLY.COM
Lubricants & Care Products - Grease
Tools
Phil Wood Grease
Premium waterproof grease prevents rust and corrosion under severe wet conditions. This is the grease that has been tested and achieved "premium" lubricant status from major bearing manufactures worldwide. SKU
Size
117912 3 oz
Dispenser
MSRP
117912 Grease
Tube
Progold EPX Grease
EPX’s outstanding high temperature melting point combined w/ rust and corrosion inhibitors provides excellent performance under the most aggressive riding conditions. Comes in a convenient 2 oz squeeze dispenser and a shop sized 1 lb tub. • Not recommended for use on bolt threads. SKU
Size
156625 3 oz 140667 1 lb
Dispenser
MSRP
Tube Tub
$5.70 $13.00 125429 High Performance Synthetic Grease
Tri Flow High Performance Synthetic Grease
This non-melting, waterproof formula is designed to seal out water and contaminates to prevent rust and corrosion. Pure synthetic formula is fully compatible with most rubbers and plastics. SKU
Size
125429 3 oz
Dispenser
MSRP
Tube
$11.19
Tri Flow Red Grease
Tri-Flow Red Grease is a premium quality, extreme pressure, multi purpose waterproof grease. Aerosol can will allow you to aim where you want the grease to go, instead of smearing. Red Grease is outstanding for high temperature applications, provides an excellent seal on bearings, has a high load carrying capacity, and resists oxidation and corrosion. SKU
Size
140390 6.25 oz
Dispenser
MSRP
Aerosol
$14.32
140390 Red Grease
Wheelsmith Spoke Prep, Orange & Blue Lubricates threads, secures nipples, and prevents corrosion. Two pack. SKU
Size
120838 15ml each
Dispenser
MSRP
Bottles 120838 Spoke Prep, Orange & Blue
800-283-2453
571
Tools
Lubricants & Care Products - Grease
White Lightning Crystal Grease 142750 Crystal Grease
Crystal Grease is a clear, non-toxic & non-staining grease that is so free of 'nasty stuff' it has passed food grade standards! Completely safe to use, no harm to user, parts, paints, clothing, leathers or vinyl. SKU
Size
154256 3.5 oz 142750 1 lb
Dispenser
MSRP
Tube Tub
$7.99 $22.99
Lubricants & Care Products - Hydraulic Brake Fluid Aerosols and certain fluids considered to be hazardous materials cannot be shipped by air. They can only be shipped by ground transportation.
131208 5.1 DOT Brake Fluid
Avid 5.1 DOT Brake Fluid SKU
Size
131208 4 oz
Spec's
MSRP
5.1 DOT
$12.00
Avid Pro Disc Brake Bleed Kit (DOT 5.1) 147167 Pro Disc Brake Bleed Kit (DOT 5.1)
• Durable syringe w/ replaceable seals • Steel plunger • Ergonomic plunger handle • Aluminum hose couplings • Rotating steel fittings w/ knurled surface treatment • High-volume hose w/ clamp, 4 aluminum hose fittings, 4 threaded hose barbs SKU
MSRP
147167
$68.00
Avid Standard Disc Brake Bleed Kit 157004 Standard Disc Brake Bleed Kit
Includes: 2 standard bleed syringes and fittings; 2 threaded hose barbs; 2 aluminum compression fittings; 2 bleed o-rings; 1 crows foot socket attachment; 1 25/10mm torx wrench; 4 bleed blocks. • DOT 5.1 brake fluid not included. SKU
Spec's
157004 Fluid not included
MSRP
$38.00
Finish Line DOT Brake Fluid
Highest quality DOT fluid. Provides maximum fluid life and braking performance. Finish Line’s DOT fluid exceeds the most stringent 5.1 Spec's and is compatible/mixable w/ all DOT 3, 4, 5.1 spec’d systems. Features a super low viscosity to yield superior lever response and pad retraction through a full range of temperatures. SKU
Size
MSRP
157667 4 oz
$8.99
157667 DOT Brake Fluid
572
SEATTLEBIKESUPPLY.COM
Lubricants & Care Products - Hydraulic Brake Fluid
Tools
Finish Line Mineral Oil Brake Fluid
A high performance Mineral Oil brake fluid. Provides maximum fluid life and braking performance. Features a super low viscosity to yield superior lever response and pad retraction through a full range of temperatures. SKU
Size
MSRP
157666 4 oz
$8.99
Shimano Disc Brake Mineral Oil SKU
Size
126074 50ml
Spec's
MSRP
Mineral Oil
$20.99
157666 Mineral Oil Brake Fluid
Shimano Disc Brake Mineral Oil SKU
Size
155379 1 Litre
Spec's
MSRP
Mineral Oil
$24.99
Shimano TL-BT03 Disc Brake Bleed Tool Kit
Universal disc brake bleed kit compatible w/ open reservoir and funnel bleed disc brake systems includes: syringe, funnel, pedestal, reservoir clamp, overflow bottle and 2 hose clips SKU
MSRP
151174 126074 Disc Brake Mineral Oil
Shimano TL-BT03-S Simple Disc Brake Bleed Tool Kit
Funnel/Stopper + syringe form a simple kit for use when bleeding: M988; 985; 820; 785; 675; 666; 640, and 596 model hydraulic disc brakes. Designed for use w/ mineral oil only. SKU
MSRP
159186
TRP Disc Brake Bleed Kit
Includes: 50cc TRP mineral oil; syringe; plastic tubing; hose retainer; compression ferrules; brass inserts w/O-ring inlet & outlet valves. SKU
158718
800-283-2453
MSRP
151174 TL-BT03 Disc Brake Bleed Tool Kit
573
Tools
Lubricants & Care Products - Lube Lubricants & Care Products - Lube Aerosols and certain fluids considered to be hazardous materials cannot be shipped by air. They can only be shipped by ground transportation.
Boeshield T-9 Lube
Developed by Boeing for long-term lubrication. The formulation, based on a unique combination of solvents and waxes, is designed to penetrate metal pores and dissolve minor corrosion, then leave a resilient waxy coating that lasts for many months. *Land ship only. 122184 T-9 Lube
130694 Performance Silicone Lubricant
SKU
Size
Dispenser
MSRP
137135 122183 122184 122182 142334
1 oz 4 oz 4 oz 12 oz 1 gal.
Drip Drip Aerosol Aerosol Jug
$3.99 $9.99 $9.99 $18.99 $119.99
DuPont Performance Silicone Lubricant
Lubricates any item: Plastic, metal, rubber, etc. Teflon added and waterproof. Excellent for treadmill decks. *Land ship only SKU
Size
130694 10 oz
Dispenser
MSRP
Aerosol
$6.99
Finish Line Bike Care Value Pack 159092 Bike Care Value Pack
4 oz bottles of the essential cleaning and lubricating products from Finish Line. Everything needed to properly clean and lube a bicycle in one box. SKU
MSRP
159092
$16.99
Finish Line Ceramic Wax Lubricant
Finish Line's Ceramic-WAX is an advanced wax-based lubricant featuring nano-sized platelets of ceramic boron nitride and micron particles of fluoropolymer. Every time Ceramic WAX is applied, the ceramic coating is enhanced ultimately providing the durability of many oil-based lubricants. Ceramic WAX ensures total drivetrain cleanliness w/o the distance' or 'build-up' compromises of other wax lubricants. SKU
Size
142742 2 oz 142743 4 oz
Dispenser
MSRP
Drip Drip
$5.99 $9.99
Finish Line Ceramic Wet Lubricant
Ceramic WET is Finish Line’s most advanced and effective racing lubricant. This wet-style full synthetic lubricant is enhanced w/ nano-sized platelets of boron nitride and micron particles of fluoropolymer. As Ceramic WET builds it’s ceramic coating on the frictional surfaces of a drivetrain, cyclists will feel the smoothness and appreciate the added quietness. Ceramic WET is a full water-proof lubricant, so it can be used in all disciplines: Mountain bike; cyclocross, and road racing. 142743 Ceramic Wax Lubricant
574
136890 Ceramic Wet Lubricant
SKU
Size
136890 2 oz 136892 4 oz
Dispenser
MSRP
Drip Drip
$5.99 $9.99 SEATTLEBIKESUPPLY.COM
Lubricants & Care Products - Lube
Tools
Finish Line Teflon Dry Lube
Dry formula repels grime. Improves shifting. Quiets noisy parts. *Aerosol land ship only. SKU
Size
Dispenser
MSRP
119512 103066 119320 119322
2 oz 4 oz 8 oz 11 oz
Drip Drip Aerosol Aerosol
$4.99 $7.99 $9.99 $12.99
Finish Line Wax Lube
Self cleaning ultra dry lube with DuPont Krytox paraffin additive. SKU
Size
121327 2 oz 121328 4 oz
Dispenser
MSRP
Drip Drip
$4.99 $7.99
103066 Teflon Dry Lube
121328 Wax Lube
103146 Wet Lube
132892 CL-1 Synthetic Blend Chain Lube w/ Teflon
137455 Chainj Chain Lube
140581 GO! Lube
Finish Line Wet Lube
Wet style lube for wet or muddy riding conditions. *Aerosol land ship only. SKU
Size
Dispenser
MSRP
103146 2 oz 119321 4 oz 101108 8 oz
Drip Drip Aerosol
$4.99 $7.99 $9.99
Park CL-1 Synthetic Blend Chain Lube w/ Teflon
Using Teflon & a proprietary blend of oils this works great in wet or dry. Penetrates, reduces friction, prolongs component life, displaces moisture and protects parts from rust & corrosion. 4 oz bottle. SKU
Size
MSRP
132892 4 oz
$8.29
Pedro’s Chainj Chain Lube
Medium-viscosity, vegetable/synthetic lubricant specifically formulated for mixed-to-wet riding conditions. Engineered for longer life and superior performance in wet weather. A slight negative charge associates ionically w/ metal surfaces for added life and increase anti-wear properties. Biodegradable. SKU
Size
137455 4 oz
Dispenser
MSRP
Drip
$9.00
Pedro’s GO! Lube
Go! The most advanced vegetable/synthetic lubricant designed for clean riding conditions. Lowviscosity,engineered to penetrate well into the chain to provide mess-free lubrication and protect metal surfaces from oxidation and wear. Higher lubricity means metal surfaces slide easier, reducing friction and increasing efficiency. Biodegradable. SKU
Size
140581 4 oz
800-283-2453
Dispenser
MSRP
Drip
$11.00
575
Tools
Lubricants & Care Products - Lube
Pedro’s Ice Wax 2.0 Chain Lube
Natural wax-based dry lube for dry-to-mixed riding conditions. Advanced chemistry uses a unique detergent base to push contaminants from the chain. Hydrophobic wax coating repels water and provides protection from wear and contaminants. Biodegradable. SKU
Size
142719 4 oz
Dispenser
MSRP
Drip
$11.00
Pedro’s Syn Lube 142719 Ice Wax 2.0 Chain Lube
143258 Syn Lube
Fully synthetic lubricant designed to handle the harshest conditions. Formulated w/ extreme pressure additives, corrosion inhibitors, and tackifiers to provide wear protection, lubrication, and staying power in extremely wet and muddy conditions. SKU
Size
143258 4 oz
Dispenser
MSRP
Drip
$9.00
Phil Wood BIO Lube
Bio-Lube is a lighter lubricant than Tenacious Oil that is created using all-natural ingredients. Use as a "fair-weather" or household lube, Bio-Lube penetrates and lubricates contacting metal surfaces, while providing a protective film against corrosion. Bio-Lube is environmentally friendly, nontoxic and completely biodegradable. SKU
Size
142338 4 oz
Dispenser
MSRP
Drip
Phil Wood Tenacious Oil
Tenacious oil is designed to maintain a protective lubricating film between moving parts for less wear and longer life. SKU
Size
117916 4 oz 142338 BIO Lube
Dispenser
MSRP
Drip
117916 Tenacious Oil
Progold PG2000 Lubricant
Penetrating lubricant has the same characteristics as Pro Link. Unique penetrating and corrosion prevention properties make it an excellent all purpose lube. SKU
Size
130226 12 oz
Dispenser
MSRP
Aerosol
$13.50
Progold Prolink Chain Lube
Uses Metal Friction Reducer (MFR) technology. Prolink is a thin bodied lube that does not build up or become tacky because it does not contain solids such as Teflon, wax, graphite, or plastic. Prolink sheds dirt, repels moisture, and disperses water, so that your bike runs smoother and lasts longer. SKU
Size
130225 4 oz 156621 8 oz 131293 32 oz
130226 PG2000 Lubricant
576
Dispenser
MSRP
Bottle Aerosol Bottle
$8.99 $10.50 $41.50
130225 Prolink Chain Lube
SEATTLEBIKESUPPLY.COM
Tools
Lubricants & Care Products - Lube
Progold Xtreme Chain Lube
• Any weather, any terrain • Combines metal friction reducer technology w/ more persistent carriers • Xtreme is a chain lube formula for long-distance and extreme off-road conditions • MFR bonds to metal surfaces and resists build-up and tackiness, in addition to shedding water. SKU
Size
156622 4 oz 156623 8 oz 159316 16 oz
Dispenser
MSRP
Bottle Aerosol Spray Bottle
$12.00 $13.49 $33.00
140391 Foaming Superior Lubricant
Tri Flow Foaming Superior Lubricant
Tri-Flow provides twice the lubricating power of most competitive brands. Its light viscosity allows for deep penetration into hard to reach moving parts. High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity. Foaming formula sticks where you spray it to penetrate deep into the metal. SKU
Size
140391 10 oz
Dispenser
MSRP
Spray
$13.79
Tri Flow Superior Dry Lube 124591 Superior Dry Lube
Superior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin coating that repels water. SKU
Size
124591 2 oz
Dispenser
MSRP
Drip
$5.66
Tri Flow Superior Lubricant
Tri-Flow provides twice the lubricating power of most competitive brands. Its light viscosity allows for deep penetration into hard to reach moving parts. High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity.
102297 Superior Lubricant
SKU
Size
Dispenser
MSRP
102333 131110 117017 102949 102297 118729
2 oz 6 oz 4 oz 6 oz 12 oz 1 gal.
Drip Drip Aerosol Aerosol Aerosol Metal Can
$4.99 $10.89 $8.40 $11.12 $18.61 $121.28
Tri Flow Superior Soy Lube
Tri-Flow Superior Soy offers an advanced formula combining natural soybean oil and P.T.F.E. This formula and packaging were designed and manufactured taking steps to reduce environmental impact. Apply Superior Soy w/ the refillable, hand-pumped spay bottle. This is a simple and low impact way to apply Soy lube w/ no regrets of releasing harmful chemical accelerants into the atmosphere. SKU
Size
145640 2 oz 145641 3.38 oz
Dispenser
MSRP
Drip Spray Bottle
$5.66 $14.69
145640 Superior Soy Lube
578
SEATTLEBIKESUPPLY.COM
Tools
Lubricants & Care Products - Lube
WD-40 Bike Dry Lube
For dry and arid riding conditions. Extensively tested by scientists and pro mechanics alike. Special polymers form a dry film to protect your chain and repel dirt in arid or dusty conditions. The result is a clean, quiet drivetrain. SKU
Size
158650 4 oz
Dispenser
MSRP
Drip
$8.99
WD-40 Bike Multi-Use Product
Still a must for every bike tool chest. Lubricate squeaky shifters, cables, derailleurs and pivot points. Free metal-to-metal seat posts, bottom brackets and bolts. Shed mud from pedals and cleats. Remove adhesive residue and sticky substances. Prevent rust on steel frames and parts. WD-40 Multi-Use Product does it all. Original formula. SKU
Size
158654 4 oz
Dispenser
MSRP
Drip
$7.99
158650 Dry Lube
158654 Multi-Use Product
WD-40 Bike Wet Lube
For wet and muddy riding conditions. Our exclusive formula has been professionally tested and is amped up for premium lubrication. Improves shifting and extends chain life by repelling moisture and gunk. SKU
Size
158649 4 oz
Dispenser
MSRP
Drip
$8.99
158649 Wet Lube
White Lightning Clean Ride Lube
140139 Clean Ride Lube
Clean Ride goes on wet, then sets up dry. Patented Self-Cleaning wax film flakes and sheds itself when contaminated w/ dirt and grime to keep parts clean and prevent abrasive wear. Cerflon additive increases durability and requires little to no cleaning before reapplication. SKU
Size
140139 4 oz 140141 8 oz
Dispenser
MSRP
Bottle Bottle
$7.99 $11.99
White Lightning Epic Ride Lube
Epic Ride is a light synthetic lube. An excellent "All Conditions" bike lube. Provides long haul durability w/o excessive grime build-up. Works great for cables and derailleurs also. Requires occasional cleaning before re-application. SKU
Size
Dispenser
MSRP
140140 4 oz 159428 6 oz 142748 8 oz
Bottle Aerosol Bottle
$8.99 $9.99 $14.99
140140 Epic Ride Lube
800-283-2453
579
Tools
Lubricants & Care Products - Lube
White Lightning Wet Ride Lube
Wet Ride is a heavy bodied synthetic bike lubricant. Perfect for long distances and extreme wet weather conditions. Prevents rusting during stream crossings and salt-air rides. Regular cleanings are recommended to keep grime build up to a minimum. SKU
Size
140146 4 oz 142749 8 oz
140146 Wet Ride Lube
Dispenser
MSRP
Bottle Bottle
$7.99 $11.99
Lubricants & Care Products - Suspension Oils & Lubricants Aerosols and certain fluids considered to be hazardous materials cannot be shipped by air. They can only be shipped by ground transportation.
Finish Line MAX Suspension Spray
Over time, fork stanchions become dry and dirty, causing the fork to stiffen up, become noisy and lose travel. MAX smoothes, quiets, and improves the performance of old and new forks - even those w/ coated stanchions. Use MAX before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. Use MAX to break in new forks or bring old ones back to life. SKU
Size
157665 12 oz
Spec's
MSRP
Aerosol
$9.99
132933 New Formula Shock Oil
Finish Line New Formula Shock Oil
Semi-Synthetic Formulation that combines the best of all available oils and additives to result in a super high performance shock oil. Compatible with all suspensions systems and component parts. Will not thicken or thin with temperature variations. SKU
Size
132934 16 oz 132935 16 oz 132933 16 oz
Weight
MSRP
5 wt 10 wt 15 wt
$18.99 $18.99 $18.99
Rockshox Suspension Oil
139128 Suspension Oil
580
SKU
Size
Weight
MSRP
139128 132567 132568 132569
1L 1L 1L 1L
2.5 wt 5 wt 10 wt 15 wt
$16.00 $20.00
SEATTLEBIKESUPPLY.COM
Lubricants & Care Products - Wash & Polish
Tools
Lubricants & Care Products - Wash & Polish Aerosols and certain fluids considered to be hazardous materials cannot be shipped by air. They can only be shipped by ground transportation.
Finish Line Bike Wash
Quickly cleans dirt, clay, road grime and chain soils off of your bike w/o scrubbing. Long Reach Sprayer is no longer included w/ gallon size, this item is now available separately. SKU
Size
124040 1 L 136648 1 gal.
Dispenser
MSRP
Spray Bottle Container
$12.99 $19.99
124040 Bike Wash
Finish Line Showroom Polish and Protectant Professional bicycle detailer, protects and polishes all of your components. SKU
Size
119316 11 oz
Dispenser
MSRP
Aerosol
$7.99
Pedro’s Bike Lust Bike Polish
Silicone polish can be used on bike frames and key parts to protect against UV rays, add shine and buff out scratches. Includes a biodegradable cleaner to remove light amounts of grime from frames. Repeated usage builds a protective surface that makes future cleaning easier. Can even be used on tires to help shed mud. SKU
Size
148620 16 oz
Dispenser
119316 Showroom Polish and Protectant
MSRP
Spray Pump
Pedro’s Green Fizz Foaming Bike Wash
Foaming bike wash uses surfactants to lift dirt and grime from the whole bike. The solvent-free formula can be safely used on all parts and materials –- including carbon fiber -- w/o washing away grease and lubricants or damaging delicate parts. Can be used straight from the bottle for quick cleaning or dilute w/ water and use w/ a brush for tougher jobs. SKU
Size
137456 16 oz 143261 1 L
Dispenser
MSRP
Spray Bottle Spray Bottle
$10.00 $16.00 148620 Bike Lust Bike Polish
Progold Bike Shine
ProGold Bike Shine restores bicycles to that like-new shine. Bike Shine also protects against the sun's rays that can dull and fade a bike's finish over time. Safe for all surfaces, Bike Shine leaves a residual coating that aids in repelling water, dust and dirt. SKU
Size
159317 16 oz
Dispenser
MSRP
Spray Bottle
$14.99
137456 Green Fizz Foaming Bike Wash 800-283-2453
581
Tools
Lubricants & Care Products - Wash & Polish
Progold Bike Wash
• Cleans all types of frames, spokes, and components • Contains no lye, phosphates, bleach, dyes, brighteners, or perfume • In addition to safely cleaning carbon frames and bike parts, Bike Wash can be used on washable fabrics and finishes. SKU
Size
156628 16 oz
Dispenser
MSRP
Bottle
$9.00
Progold Blast-Off Degreaser
156628 Bike Wash
Blast-Off quickly cleans precision bicycle parts w/ no scrubbing. Immediately strips away sticky grime and removes caked on debris w/ ease. Blast-Off dries quickly w/o need for rinsing. Leaves behind no oily residue. Blast-Off's unique sprayer deep-cleans and flushes dirt, grime, and grease away, restoring cogsets, derailleurs, and chains to like-new condition. Contains a corrosion inhibitor to prevent flash rusting. SKU
Size
159321 20 oz
Dispenser
MSRP
Aerosol
$11.49
Progold Chain Shine
Derived from natural ingredients, ProGold's Chain Shine provides quick and powerful grease and grime cutting action. The unique formula deep-cleans and flushes dirt, grime, and grease away for heavy-duty cleaning. SKU
Size
159318 22 oz
Dispenser
MSRP
Bottle
$13.49
Progold Degreaser + Wash
• Cleans grime, oil, and greases gently • Safe on all surfaces • Concentrated degreaser and wash. SKU
Size
156629 16 oz
Dispenser
MSRP
Bottle
$12.00
Progold Foaming Citrus Degreaser
Water based foaming degreaser w/ high solvency, fast acting, and clinging properties Degreases chains and other lubricated parts quickly and effectively. Supplied w/ an extension tube to reduce over spray and provide for pinpoint application. SKU
Size
159320 20 oz
Dispenser
MSRP
Aerosol
$14.99
Progold Helmet Cleaner and Deodorizer
Foaming action safely removes the root cause of foul odors w/in helmet liner and padding. The foaming action also safely and easily loosens and removes dirt, grime, and bugs from helmet exterior. SKU
Size
Dispenser
MSRP
159319 8 oz
Aerosol
$9.99
Progold Steel Frame Protector
• Internal rust protection for all steel frames: Paint protects the outside of the frame • Use Steel Frame Protector w/ its rust-inhibitive coating to protect the inside • This 6 oz can will treat several frames. 156630 Steel Frame Protector
582
SKU
Size
Dispenser
MSRP
156630 6 oz
Aerosol
$12.49
SEATTLEBIKESUPPLY.COM
POP Displays
Tools
WD-40 Bike Foaming Bike Wash
Dirt-eating suds remove the most stubborn grime from your bike, leaving it sparkling clean. Biodegradable and safe for carbon fiber, titanium, aluminum, steel, chrome, rubber or plastic. SKU
Size
158651 1 L 159595 1 Gallon
Dispenser
MSRP
Spray Bottle
$13.99 $36.99
158651 Foaming Bike Wash
WD-40 Bike Frame Protectant
Specially formulated to prevent the build-up of dirt, dust and grime. Helps treated surfaces stay cleaner longer. Restores scratched areas and the luster of clear coats, carbon or other finishes. SKU
Size
158653 8 oz
Dispenser
MSRP
Bottle
$14.49
White Lightning Wash & Shine
Wash & Shine makes cleaning your bike easy. Simply spray onto the entire bike. Wash & Shine Quickly loosens, lifts and removes dirt, grime, mud and more from the bike. Rinse or wipe off, leaves a nice shine when dry. Safe for all materials. SKU
Size
140147 32 oz
Dispenser
MSRP
Spray Bottle
$9.99
158653 Frame Protectant
P.O.P. Displays
Chamois Butt’r Gravity Feed P.O.P. Display
Each POP display has 75 - 9ml individual use packets. Custom graphics w/ suggested MSRP on back panel and a location for the shop to put their selling price on the front panel. Recycleable Cardboard box. Front panel is perforated so it opens into a tray for ease of displaying and dispensing product. SKU
Model
159462 Eurostyle 159461 HER
Size
Qty
9ml Packet 9ml Packet
75 75
MSRP
140147 Wash & Shine
Finish Line Care Center Display* * Drop ship only SKU
MSRP
156990
159462 Gravity Feed P.O.P. Display 800-283-2453
583
Tools
POP Displays
Finish Line Counter Top Display*
Made from corrugated plastic w/an open design this Counter Top display features: 12-4 oz bottles of Dry Lube; 12-4 oz bottles of Wet Lube; 4-6 oz bottles of 1-step; 6-17 oz bottles of Speed Clean; 6 Starter Kits and 6 packs of Gear Floss. Free freight from Finish Line. Contact your rep for full details. * Drop ship only SKU
MSRP
156988 156988 Counter Top Display
Finish Line Display Tray 2 oz / 4 oz
Free Impulse Tray when you order any 24 unit combination of 2oz / 4oz lubes! Holds 18 bottles of 2oz or 4oz assorted bottles. All trays interlock. Each tray just 9" x 10. SKU
Spec's
MSRP
138047 Counter Top
Finish Line Display Tray 8 oz / 12 oz
Free Impulse Tray when you order any 24 unit combination of 8oz / 12oz lubes! Holds 12 assorted 8oz or 12oz bottles. All trays interlock. Each Tray just 9" x 10. SKU
138047 Display Tray 2 oz / 4 oz
Spec's
MSRP
138863 Counter Top
Finish Line Gravity Feed Display*
For use as a counter top, or wall hung display. Holds 18-4 oz bottles of lube. Order includes 36-4 oz bottles of Teflon DRY lube and 50 Maintenance guides. Free freight from Finish Line. Contact your rep for full details. * Drop ship only SKU
MSRP
156987
Finish Line Wall Mount Display* 138863 Display Tray 8 oz / 12 oz
* Drop ship only SKU
MSRP
156989
Lizard Skins DSP Handle Bar Tape Display
• Display comes w/ handlebar w/ DSP tape installed so customers can feel the plushness before they buy! • Buy 25 rolls of Lizard Skins DSP tape and display is free. SKU
153907 DSP Handle Bar Tape Display
584
MSRP
153907
SEATTLEBIKESUPPLY.COM
POP Displays
Tools
Park PDR-4 Tool Display*
The PDR-4 includes a specially priced mix of fast selling tools, a copy of our newly updated Home Mechanic Tool Selection Guide, new graphics, and a versatile display that can easily be rolled from one location in the store to another. It all adds up to create a well-defined tool and information center that sends a shop’s customers the message that they’ve come to the right place for their bicycle tool needs. * Drop shipped directly to the dealer from Park Tool. SKU
Model
MSRP
155344 BBB-3 155344 PDR-4 Tool Display
Park PDR-4RK Tool Display Refill Kit* Refill Kit for the Park PDR-4 Display Rack. Includes Tools Only. * Drop shipped directly to the dealer from Park Tool. SKU
MSRP
157152
Park PDR-5 Tool Mini Wall Display*
The PDR-5 is a great way to get to get tool orffereings organized in a compact space. * Drop shipped directly to the dealer from Park Tool. SKU
MSRP
157153 157152 PDR-4RK Tool Display Refill Kit
Park PDR-6 Wall Mount Display*
The PDR-6 will help showcase a selection of tools on two display panels. Each panel can be mounted to nearly any wall, and in any configuration. * Drop shipped directly to the dealer from Park Tool. SKU
MSRP
157154
SBS Clip-On Sign Holder
Universal knuckle allows the sign holder to tilt in any direction. Clip is lined with anti-slip coating. Clip clamps around materials up to 1-1/8" thick. Displays material from. 008" to .020" thick. 4" overall length. SKU
Model No.
133605 4008
Spec's
Color
10/Bag
Clear Plastic
MSRP
133605 Clip-On Sign Holder
Trik Topz Valve Cap Display
Free with the purchase of 60 pairs of Trik Topz valve caps! The fifteen hooks hold up to 10 pairs each. Note: This is the rack and header card only. Product sold separately. SKU
Spec's
MSRP
126652 Counter or Wall Mount
126652 Valve Cap Display 800-283-2453
585
Tools
POP Displays
White Lightning Counter/Slatwall Display*
White Lightning’s Counter/Slatwall display makes it easy for customers to pick up a bottle of lube, put it near your register. This display contains: 12-4 oz bottles of Clean Ride; 12-4 oz bottles of Epic Ride; 12-4 oz bottles of Wet Ride and 12-12 oz Aerosol cans of Clean Streak. Free freight from White Lightning. Contact your rep for full details. * Drop ship only SKU
156991 Counter/ Slatwall Display
146517 Full Free-Standing Display w/ Hooks
MSRP
156991
White Lightning Floor Display* * Drop ship only SKU
MSRP
156992
XLC Full Free-Standing Display w/ Hooks 1 meter tall. 30 hooks included. Merchandise not included. SKU
Color
MSRP
146517 Silver
Racks, Bike Display
Delta Boticelli Free Standing 4 Bike Rack 137355 Boticelli Free Standing 4 Bike Rack
138244 El Greco Pulley Bike Storage System
Fully adjustable arms fit any bike with a silver powder coated finish. Maximum load of 120lbs. Easy to assemble and tools are included. SKU
Size
137355 4-Bike
Color
MSRP
Gray
$149.99
Delta El Greco Pulley Bike Storage System
Raise and store a bike up and out of the way, Easily holds a bicycle, kayak, ladder, etc., Efficient pulley system helps you lift and lower heavier objects. Engineered for long durable performance; finished in tough silver powdercoat, Includes mounting hardware and full instructions Maximum load 50lbs SKU
Model No.
138244 RS2100
Color
MSRP
Silver
$34.99
Delta Leonardo Wall Mount Storage Rack • Single Bike Storage • Elegant space-saving design • Looks good in any room • Tough silver powdercoat finish • Rubberized coating protects wheel rim 129742 Leonardo Wall Mount Storage Rack
586
SKU
Size
129742 1-Bike
Color
MSRP
Gray
$14.99
SEATTLEBIKESUPPLY.COM
Racks, Bike Display
Tools
Delta Michelangelo 2-Bike Wall Rack
No drilling required. Lean type. Fully adjustable arms fit any bike. Max. weight: 2-50lb bikes. SKU
Size
131291 2-Bike
Color
MSRP
Gray
$79.99
Delta Rothko Rolling Bike Stand Rolling bike stand. Powder coat finish. Fits all tires. SKU
Size
130697 1-Bike
Color
MSRP
Gray
$34.99
131291 Michelangelo 2-Bike Wall Rack
130697 Rothko Rolling Bike Stand
135245 Seuret 2 Bike Floor Stand
129387 Wheel Arch #6012
Delta Seuret 2 Bike Floor Stand
Fits two bikes facing opposite directions. Powder coat finish. Fits all tires. SKU
Size
135245 2-Bike
Color
MSRP
Gray
$39.99
Park ES-1 Event Stand
The ES-1 is a versatile, stable, multi-purpose storage rack built to hold up to twelve bikes by the nose of the saddle. Perfect for events, races or sidewalk storage, the ES-1 disassembles and folds easily for compact storage. Includes two height adjustable tripod uprights, two 47" (119cm) support tubes, and one connector sleeve. The ES-1 is approximately eight feet long but can be extended in length w/ the use of ES-2 Event Stand Add on Kit. SKU
MSRP
157662
$359.95
Park ES-2 Event Stand Add-On Kit
The ES-2 extends the length of the ES-1 Event Stand by eight feet. Includes one height adjustable tripod upright, two 47" (119cm) support tubes, and one connector sleeve. SKU
MSRP
157663
$239.95
Saris Wheel Arch #6012 SKU
MSRP
129387
$26.99
Topeak Flash Stand
The ultimate portable tune up stand. Light weight and foldable. Supports bike from BB. 500 grams. SKU
MSRP
133562
$44.95
800-283-2453
133562 Flash Stand
587
Tools
Racks, Bike Display
Topeak Flash Stand Slim
For the enthusiast who wants to stand or display their prized road bike. Constructed of aluminum and engineering-grade polymer, the Flash Stand Slim slips over any non-drive side Shimano Hollow Tech-II road crank arm. SKU
Color
139737 Silver
139737 Flash Stand Slim
137203 One Up Bike Holder
MSRP
$44.95
Topeak Line Up Stand SKU
Color
158942 Black
MSRP
$64.95
Topeak One Up Bike Holder
Elegant high polished aluminum wall rack w/ aluminum side hanger for bike storage; Rubber padded hook for wheel protection against scratching; Two side hangers make hanging jerseys, helmets, and other goodies neat and convenient; Integrated side hanger knobs for quick and easy adjustments ; Grooved wheel rests to keep your bike aligned on the wall; Easy to install w/ all mounting hardware; Maximum load: 35 pounds SKU
Size
137203 1-Bike
MSRP
$49.95
Topeak Dual-Touch Bike Stand
6061 aluminum vertical tube with 2 bike mounts. Adjustable height to 10' 7/8". Black finished tube. SKU
Size
131188 2-Bike
MSRP
$199.95
Topeak Two-Up Tune Up Bike Stand 131188 Dual-Touch Bike Stand
150452 Two-Up Tune Up Bike Stand
Multi-Bike, Free Standing storage system that is solid enough to serve as a light duty work stand. Constructed of aluminum tubing, the center pillar extends to almost seven feet high. The tripod base provides wide, stable support. 2 bike mounts included. Base: 17.3" x 13.4", 84.3" max height. SKU
Size
150452 2-Bike
MSRP
$249.95
Topeak TwoUp TuneUp 3rd Hook
Additional upper and lower hooks for the TwoUp TuneUp bike stand. SKU
Model
158916 Lower 158915 Upper
MSRP
$49.95 $49.95
XLC Axle Mount Single Bike Display • Supports bicycle by the front or rear axle (preferred)
152113 Axle Mount Single Bike Display
588
152112 Wheel Mount Single Bike Display
SKU
MSRP
152113
$36.00
XLC Wheel Mount Single Bike Display • Supports bicycle by front or rear wheel • Steel w/ rubber feet. SKU
MSRP
152112
$36.00 SEATTLEBIKESUPPLY.COM
Tools
Repair Stands - Stands Racks, Parking Shipping restrictions may apply. Ask your SBS rep for details.
Hollywood Bike Valet Parking Stand Double sided, indoor or outdoor use. SKU
# of Bikes
121464 6-Bike
Spec's
MSRP
Double Sided
$114.99
121464 Bike Valet Parking Stand
109384 Mighty Mite Parking Stand
136871 PB-1 Portable Workbench
134506 PCS-10 Home Mechanic Repair Stand
Saris Mighty Mite Parking Stand 6210. Lightweight & durable for use indoors and out. SKU
Model
156890 Mini 109384 Standard
# of Bikes
Spec's
MSRP
4-Bike 6-Bike
Double Sided Double Sided
$69.99 $119.99
Repair Stands - Stands
Park PB-1 Portable Workbench Folds for easy transportation and storage. 36" x 23" work surface Specially sized slots and holes for storage. SKU
Model No.
136871 PB-1
MSRP
$149.95
Park PCS-10 Home Mechanic Repair Stand
Cam-type clamp allows single action clamping of tubes 7/8" to 3" (24mm to 76mm). Clamping pressure is fully adjustable and jaw covers are replaceable. Composite top tube for smooth 360-degree clamp rotation. Quick release height adjustment (39" to 57", 99cm to 145cm). Folds to 41". SKU
Model No.
134506 PCS-10
MSRP
$198.95
Park PCS-12 Home Mechanic Bench Mount Repair Stand
Bench version of PCS-10. Cam-type clamp allows clamping of tubes 7/8" to 3". Clamping pressure is fully adjustable and jaw covers are replaceable (part #1185K). Composite top tube for smooth 360-degree clamp rotation. Quick release height adjustment (39" to 57", 99cm to 145cm). Folds to 41" for portability and storage. Three-point leg system w/ reinforced center yolk for superior stability. SKU
MSRP
136880
$118.95
800-283-2453
136880 PCS-12 Home Mechanic Bench Mount Repair Stand
589
Tools
Repair Stands - Stands
Park PCS-4.2 Deluxe Home Repair Stand
Includes 100-5D Professional Micro Adjust Clamp. Folds flat for storage. Steel, powder coated tubing. Composite top tube assembly. Base has four points of contact w/ ground for stability. Ideal for light duty shop use or home use. SKU
Model No
MSRP
145130 PCS-4.2
$299.95
Park PCS-9 Home Mechanic Repair Stand 145130 PCS-4.2 Deluxe Home Repair Stand
130949 PCS-9 Home Mechanic Repair Stand
Three-point leg system creates stable base. Height adjusts from 39"to 57"(99cm to 145cm). Screw type clamp adjusts to fit tubes of various shapes from 7/8" to 3". Screw type clamp adjusts to fit tubes from 7/8" to 3" (24mm to 76mm). Clamp rotates 360 degrees for easy access to any part of bike. Will also clamp on aero shaped seat posts. Legs fold upward for easy storage. Loosen the lower bolt on the primary tube, and lift legs upward. SKU
Model No.
MSRP
130949 PCS-9
$149.95
Park PRS-2 OS-2 Double Arm Repair Stand
Clamping height adjusts from 50" to 62" (127-158cm). Clamps rotate 360 degrees so bike can be positioned at any angle. Stand rotates 360 degrees. Includes two 100-3D Professional Micro Adjust Clamps. Base not included. Use Sku 153036 for base. SKU
MSRP
153067
Park PRS-20 Team Race Stand
Mounts hold bike securely by the front or rear dropouts. Quick release retention strap stabilize bottom bracket. 360 degree horizontal rotation. Folds to 33". Built in “sleeping hub” allows easy chain cleaning w/ rear wheel removed. Bottom bracket height quickly adjusts from 28" to 38". 153067 PRS-2 OS-2 Double Arm Repair Stand
132889 PRS-20 Team Race Stand
SKU
Model No.
132889 PRS-20
MSRP
$238.95
Park PRS-25 Team Issue Repair Stand
100-25D Prof. Micro Adjust Clamp quickly clamps and releases nearly any tube from 7/8" to 3" (2376mm), including aero tubes. Fully adjustable clamping pressure. Narrow clamping jaws (2.7"/7cm) fit into tight areas or on short seat posts. 360º clamp rotation. Quickly and easily folds to 47". Clamping height adjusts up to 60". Proprietary Hexatude hex-shaped aluminum tubing ensures low flex and no rotation. Weighs just 13 pounds (6 kg). SKU
Model No.
145089 PRS-25
MSRP
$339.95
Park PRS-3 OS-1 Single Arm Repair Stand
Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm) in diameter and rotates 360 degrees for easy access to any part of the bike. Clamp height is adjustable from 50 to 62" (127-158cm). Stand bolts to floor using the Floor Plate FP-2, or to the 68 lb #130 base (sold separately, SBS SKU 153035). Includes #105 Aluminum tool tray. Uses the 468B jaw covers. * Note: The maximum weight holding capacity of the PRS-3 OS-1 is 150lb (68kg). 145089 PRS-25 Team Issue Repair Stand
590
SKU
Model No.
158922 PRS-3 OS-1
MSRP
$369.95
SEATTLEBIKESUPPLY.COM
Tools
Repair Stands - Stands
Park PRS-3 OS-2 Single Arm Repair Stand
Clamping height adjusts from 50" to 62" (127-158cm). Clamp rotates 360 degrees so bike can be positioned at any angle. Heavy gauge steel tubing, chrome-plated for durability. Stand can be bolted to the #130 base. Sku for base is 153035. SKU
MSRP
153066
Park PRS-33 AOK*
The PRS-33 AOK (add-on kit) turns the PRS-33 single arm stand into a double arm stand. Complete w/ clamp, sliding carriage, work tray, electric motor, power source, chain and hardware. * Drop ship only SKU
MSRP
157908
$1175.95
153066 PRS-3 OS-2 Single Arm Repair Stand
155820 PRS-33 Power Lift Shop Repair Stand
145128 PRS-4 OS-2 Deluxe Bench Mount Work Stand
145129 PRS-4W-2 Single Arm Wall Mount Stand
Park PRS-33 Power Lift Shop Repair Stand*
The biggest, strongest, stiffest, most versatile repair stand we’ve ever built. Designed w/ professional mechanics in mind, the PRS-33 combines a massive upright, versatile clamping system and smooth operating electric motor to create a super rigid workstation that offers effortless height adjustment for any bike up to 120 lbs. (54 kg). Perfect for lifting heavy electric, tandem, and downhill bikes off the ground, but also great for easy height changes during any repair or assembly. * Drop ship only SKU
Model No.
155820 PRS-33
MSRP
$1839.95
Park PRS-4 OS-2 Deluxe Bench Mount Work Stand 100-3D Professional Micro Adjust Clamp rotates 360 degrees so bike can be positioned at any angle. Heavy gauge steel tubing, chrome-plated for durability. SKU
Model No.
145128 PRS-2 OS-2
MSRP
$269.95
Park PRS-4W-2 Single Arm Wall Mount Stand
100-5D Professional Micro Adjust Clamp rotates 360 degrees so bike can be positioned at any angle. Heavy gauge steel tubing, powder coated for durability. Mounts to post or wall stud (bolts not included). SKU
Model No.
158308 PRS-4W-1 145129 PRS-4W-2
MSRP
$212.95 $212.95
Park TS-2.2 Professional Wheel Truing Stand
Accepts wheels up to 29" w/ or w/o tire. Calipers accept rim widths up to 4". Accepts hub widths up to 175mm. Removable/replaceable composite caliper tips protect painted rims. Stronger, more comfortable knob. Uprights move simultaneously to accommodate front and rear wheels. Spring-loaded calipers and caliper arm prevent binding. Nickel chrome plated heavy gauge steel. Smooth, accurate operation. Can be bench mounted or installed in a bench vice. SKU
Model No.
145086 TS-2.2
800-283-2453
MSRP
145086 TS-2.2 Professional Wheel Truing Stand
$259.95
591
Tools
Repair Stands - Stands
Park TS-8 Home Mechanic Wheel Truing Stand
Accepts 16" -29" wheel w/ or w/out tire. Sliding dropout allows for quick installation. Accepts hub width up to 170mm. Dishing performed by flipping the wheel. Replaces TS-7 SKU
Model No.
MSRP
132891 TS-8
$109.95
Topeak PrepStand Pro Repair Stand 132891 TS-8 Home Mechanic Wheel Truing Stand
147078 PrepStand Pro Repair Stand
Stable tripod base w/ quick release clamp folds compactly into included bag for storage and travel. Constructed from high strength oversized 6061 T6 tubing. Clamp head rotates 360' and features soft, non-marring rubber jaws. Built-in digital weight scale for accurately weighing small parts, or a complete bicycle. Height adjustable from 48" - 72" Clamp opens from 0.75" - 1.8" Max Weight Capacity: 55lbs SKU
MSRP
147078
$329.95
XLC Folding Repair Stand
Constructed of sturdy alloy material. Head rotates 360 degrees. Height adjusts quickly SKU
Color
145808 Silver / Black
MSRP
$174.00
Repair Stands - Parts
145808 Folding Repair Stand
120190 100-3C Clamp Deluxe
Park 100-3C Clamp Deluxe
Adjustable linkage clamp for PRS-2, PRS-3 and PRS-4. SKU
Model No
MSRP
120190 100-3C
Park 100-3D Pro Micro Adjust Clamp
Fits: PRS-2, PRS-3, PRS-4, PRS-2 OS, PRS-3 OS, PRS-4 OS, and PRS-4W. Cam-actuated adjustment system for quick entry, adjustment and exit. Grips nearly any tube from 7/8" to 3" (23-76mm), including aero tubes. Narrow clamping jaws (2.7"/7cm) fit into tight areas or on short seat posts. SKU
Model No.
MSRP
145424 100-3D
Park 100-7X Extreme Range Clamp 145424 100-3D Pro Micro Adjust Clamp
150903 100-7X Extreme Range Clamp
• Our most versatile clamp, the 100-7X fits all PRS-2, 3 and 4 repair stands (including OS models) and works on nearly any bike, no matter the size and shape of the frame tube • Clamps round, square, rectangular and aeroshaped tubes from 7/8" to 4" (23mm to 102mm) SKU
Model No.
MSRP
150903 100-7x
592
SEATTLEBIKESUPPLY.COM
Repair Stands - Parts
Tools
Park 104 Plastic Tool Tray
Lots of slots and holes to keep your tools close by. Fits all park stands except PRS-205 and PRS-305. SKU
Model No.
113860 104
MSRP
$17.95
Park 105 Tool Tray, Aluminum Made from cast aluminum. Oversized. SKU
Model No.
124281 105
113860 104 Plastic Tool Tray
124281 105 Tool Tray, Aluminum
142539 106 Work Tray
142541 106-AC Accessory Collar for 106 Tray
118878 122S Linkage Assembly
148697 1259 Cover for 100/4X/6X/15X
155821 135-33 Base Plate
109879 466 Clamp Cover
MSRP
$68.95
Park 106 Work Tray
The #106 installs easily utilizing our exclusive receiver pod accessory system found on PRS-15, PCS-10 and PCS-11 Repair Stands. Also fits PCS-1, PCS-4 and PCS-9 Repair Stands when used w/ part #106-AC Accessory Collar (available separately). SKU
Model No.
142539 106
MSRP
$33.95
Park 106-AC Accessory Collar for 106 Tray Allows #106 Work tray to work w/ PCS-1, PCS-4 and PCS-9. SKU
Model No.
142541 106-AC
MSRP
$14.95
Park 122S Linkage Assembly For PRS-2, 3 & 4. SKU
Model No.
MSRP
118878 122S
Park 1259 Cover for 100/4X/6X/15X For use w/ 100/4X/6X/15X clamps. SKU
MSRP
148697
Park 135-33 Base Plate* 115 pound base plate for repair stand PRS-33 *Drop ship only SKU
Model No.
155821 135-33
MSRP
$319.95
Park 466 Clamp Cover
Old style cover fits original clamps w/ plastic dipped jaws. Old plastic should be removed before installing new covers. SKU
Model No.
MSRP
109879 466
800-283-2453
593
Tools
Repair Stands - Parts
Park 467B Clamp Cover w/ Single Cable Relief
Fits PRS-2 through PRS-8 with single cable relief in jaw. Simply discard old covers and install new covers; each set includes two circlips. SKU
134540 467B Clamp Cover w/ Single Cable Relief
116993 467G Clamp Cover
Model No.
MSRP
134540 467B
Park 467G Clamp Cover
Fits PCS -1 & PCS-2. One cover with cable groove and one without. SKU
Model No.
MSRP
116993 467G
Park 468B Clamp Cover
Fits PCS-2 through PCS-8. For cast clamp, single cable groove on each cover. SKU
Model No.
MSRP
124372 468B 124372 468B Clamp Cover
101503 468G Clamp Cover
Park 468G Clamp Cover
Fits PCS-1 & PCS-2. For cast clamp, double cable grooves. SKU
Model No.
MSRP
101503 468G
Park Base #130
For use w/ stands PRS-3 OS-1, OS-2, OSXLB, and PRS-23.
153035 Base #130
SKU
MSRP
153035
$199.95
153036 Base #135
Park Base #135
For use w/ stands PRS-2 OS-1, OS-2, and OSXLB. SKU
MSRP
153036
$349.94
Park HBH-2 Handlebar Holder
Updated to fit handlebars w/ a diameter of up to 32MM and OS top tube up to 50mm. SKU
Model No.
MSRP
136881 HBH-2
$19.29
Park PRS-CRK Repair Kit For 100-3C Clamp SKU
136881 HBH-2 Handlebar Holder
594
125845 PRS-CRK Repair Kit For 100-3C Clamp
Model No.
125845 PRS-CRK
MSRP
$34.95
SEATTLEBIKESUPPLY.COM
Repair Tags
Tools
Park TS-2 EXT.2 Truing Stand Upright Extension
Installs on Park TS-2 or TS-2.2 Wheel Truing Stand. Allows TS-2 to fit wheels w/ QR and solid axles hubs up to 215mm wide ot the TS2.2 to fit hubs up to 230mm wide. Allows both stands to fit 29" wheels w/ tires installed. Specially sized adapter bosses allow TS-2 to fit thru axle hubs up to 135mm wide and TS2.2 to fit thru axle hubs up to 155mm wide. Can be used w/ TS-TA or TS-2TA Thru Axle Adpaters (sold separately) to fit wide thru axle hubs (170mm w/ TS-2, 190mm w/ TS2.2). SKU
Model No.
MSRP
159300 TS-2 EXT.2
149323 TS-25 Repair Stand Mounted Wheel Truing Stand
Park TS-25 Repair Stand Mounted Wheel Truing Stand
Securely holds any wheel using a quick release or threaded axle and adjusts for any wheel diameter and rim width. Installs and removes quickly and easily. Fits PRS-25 and PCS-10 Repair Stands. Will also fit the PCS-1 and PCS-4 Repair Stands when used w/ the adjustable height extension. SKU
Model No.
MSRP
149323 TS-25
119110 TSB-2 Tilting Truing Stand Base
$34.95
Park TSB-2 Tilting Truing Stand Base
Allows you to tilt your truing stand for a more comfortable position. For use with TS-2. SKU
Model No
MSRP
119110 TSB-2
$35.95
102092 Repair Tags 500/Box
Repair Tags
Wald Repair Tags 500/Box SKU
Spec's
MSRP
102092 Hanging
$37.50
132710 Bicycle Hang Tag
Walking Bird Bicycle Hang Tag
Including string, serves as a price tag. Bike I.D. and a basic Quality Control/ Assembly Checklist. Also has a place to stamp stores name. SKU
Size
132710 2-1/2" x 4-1/4"
Spec's
MSRP
#BHT-NI-250
Walking Bird Big Bicycle Repair Form
Services (132707) or No services listed (132704) for multi purpose use. Estimate column can be used to quote custom products, estimates and parts sales. Mechanics comments/recommendations, warning/diagnosis. Time clock compatible for timed repairs on back page. (Available w/ dealer’s imprint by drop ship. SKU
Size
132707 8" x 11" 800-283-2453
Spec's
#RP811-NI-250
MSRP
132704 Big Bicycle Repair Form
595
Tools
Repair Tags
Walking Bird Buyer’s Agreement
Prepunched for easy lookup in binder. Consumer safety checklist included. (Available w/ dealer’s imprint by drop ship). SKU
Spec's
MSRP
132712 #CC811-NI-100
132712 Buyer’s Agreement
Walking Bird Compact Inventory Tag w/ Store Imprint* • 1000 Inventory tags w/ you store logo • Please contact your rep to order this item. * Drop ship only SKU
Model No.
MSRP
155058 INVY1000
Walking Bird Compact Inventory/Sales Form
Date promised box. Self-adhesive backing for box and bike I.D. 4-part carbonless (assembly copy, customer invoice, control, hard copy). Separate box for assembler and test rider. (Available w/ dealer’s imprint by drop ship). SKU
Size
132708 4-1/4" x 11"
132708 Compact Inventory/ Sales Form
Spec's
MSRP
#INVY-NI-250
Walking Bird Compact Repair Tag
No services listed for multi purpose use. Liability disclaimer built in. Carbon customer claim stub filled out as you fill out store copy. Vital information on right edge for viewing in file. (Available w/ dealer’s imprint by drop ship). SKU
Size
132703 4-1/4" x 9" 132705 4-1/4" x 9"
Spec's
MSRP
#RNP-NI-250 #RP-NI-250
Walking Bird Layaway / Special Order Tag
Heavy yellow card stock. Perfect to flag inventory and repair tags as laid away or waiting for parts. Price breakdown, accessories, parts and labor are easily identified. (Available w/ dealer’s imprint by drop ship). SKU
132703 Compact Repair Tag
Size
132709 4-1/4" x 10-1/4"
Spec's
MSRP
#LASO-NI-250
Walking Bird Repair Tag w/ Store Imprint
Please call your inside rep for more info. These are custom ordered. Quantity of 1000 tags. Dropship only SKU
Model No.
MSRP
155029 RP2
132709 Layaway / Special Order Tag
596
SEATTLEBIKESUPPLY.COM
Shop Stools
Tools
Scales
142544 DC-1 Digital Caliper
Park DC-1 Digital Caliper
• Displays metric, decimal standard, and fractional standard to 1/128" • Large LCD display • Measures external, internal, depth and stepped dimensions • Resolution: +/- 0.01mm/0.0005"/1/128" • Accuracy: +/- 0.02mm/0.001 (-100mm) • Repeatability: +/- 0.01mm/0.0005" • Protective case and battery included SKU
Model No.
142544 DC-1
MSRP
$57.95
Park DS-1 Digital Scale
Accurately weigh bikes, frames or components. Clamps to repair stand, or can be hung from a hook. Measures in pounds and kilograms to the tenth. Includes a dual position, silicone hanging hook. 55 lb weight limit. SKU
Model No.
140304 DS-1
140304 DS-1 Digital Scale
MSRP
$66.95
Park DS-2 Tabletop Digital Scale • Accurate to w/in 2g/ 1000g, 2g/ 2000g, 3g/ 3000g • Tare feature to exclude weight of container • Switches easily between grams and ounces • 3000 gram (106 oz) capacity • Battery included SKU
Model No.
142519 DS-2
142519 DS-2 Tabletop Digital Scale
MSRP
$33.95
Shop Stools
Park STL-1.2 Shop Stool
STL-1.2 shop stool has chrome-plated steel legs and a comfortable padded seat w/ the Park tool logo. Seat swivels 360 degrees and is positioned at a height of 32 inches. Intended for the shop, looks great on the Sales floor. Will accept the STL-3K back rest SKU
Model No.
147257 STL-1.2
147257 STL-1.2 Shop Stool
MSRP
$109.95
Park STL-2 Shop Stool
Quickly maneuver around bike while making adjustments. Adjustable shock (5 inches of travel) 5 nylon wheels, steel legs, swivel seat w/ park tool logo. Height adjusts from 17 1/2 to 22 1/2 inches. Rolls on wheels. SKU
Model No.
130955 STL-2
MSRP
$109.95
130955 STL-2 Shop Stool 800-283-2453
597
Tools
Shop Stools
Park STL-3K Back Rest KIt
The STL-3K is kit that will add a back rest to the STL-1.2 work stool. The STL-3K includes a back rest, two steel support bars, and fasteners. NOTE: The STl-3K will only work on the STL-1.2 work stool. The previous STL-1 work stools will not accept the STL-3K 148703 STL-3K Back Rest KIt
SKU
MSRP
148703
$47.95
Storage Hooks XLC Single Bike Wall Hanger Storage System SKU
154091 Single Bike Wall Hanger Storage System
Color
MSRP
154091 Black
$30.00
XLC Storage Chains Bike Storage System SKU
MSRP
154090
$22.00
XLC Storage Hooks Hang your bikes w/ these solid hooks. SKU
Size
154135 2 Hooks 143972 2 Hooks
154090 Storage Chains Bike Storage System
Spec's
MSRP
Machine Thread Wood Screw
$7.00 $7.00
Tools - Aprons & Gloves
Park Nitrile Mechanics Gloves
Protects hands from chemicals and grime. Thin but very durable, w/ fingertip texture for maximum grip. Thicker than the original. 154135 Storage Hooks
SKU
Model No.
151528 MG-2M 151527 MG-2L 151526 MG-2X
Size
Spec's
MSRP
Medium Large X-Large
100/Box 100/Box 100/Box
$22.95 $22.95 $22.95
Park Mechanic’s Gloves
Great for riding or mechanical work, the Park Tool Mechanic’s Glove is the perfect combination of comfort and function. Digital Amara palm w/ external reinforcement patches. Touch phone compatible thumb and index fingertips. Soft fleece brow wipe. Durable two-way scratch knit glove back w/knuckles gussets. TPR adjustable closure tab.
151528 Nitrile Mechanics Gloves
598
SKU
Model No.
Size
Color
159301 159302 159303 159304
GLV-1S GLV-1M GLV-1L GLV-1X
Small Medium Large X-Large
Blue Blue Blue Blue
MSRP
SEATTLEBIKESUPPLY.COM
Tools
Tools - Bottom Bracket Tools
Park SA-3 Deluxe Shop Apron Full length. Large pockets. Cotton. SKU
Model No.
124373 SA-3
MSRP
$25.49
Redline 2013 Apron
100% heavy-duty cotton. Extra long and wide, w/ an adjustable neck strap and two pockets. Embroidered w/ the RL USA logo. SKU
Color
153822 Black
MSRP
$25.99
124373 SA-3 Deluxe Shop Apron
109880 AV-1C Axle Vise
132894 AV-4 Heavy Duty Axle & Pedal Vise
157311 AV-5 Heavy Duty Axle & Pedal Vise
Tools - Axle Vises
Park AV-1C Axle Vise
Use to clamp axles without damaging threads. SKU
Model No
MSRP
109880 AV-1
Park AV-4 Heavy Duty Axle & Pedal Vise
Works on 5/16" to 9/16" for easy wheel hub & pedal adjustments. AV-4's bridge springs keep the jaws aligned and allow the tool to automatically open when the bench vise is opened. SKU
Model No.
MSRP
132894 AV-4
Park AV-5 Heavy Duty Axle & Pedal Vise
Works on 5/16" to 9/16" for easy wheel hub & pedal adjustments. AV-4's bridge springs keep the jaws aligned and allow the tool to automatically open when the bench vise is opened. SKU
Model No.
157311 AV-5
MSRP
$34.95
Tools - Bottom Bracket Tools FSA Isis Bottom Bracket Installation Tool SKU
Spec's
127252 W/ 1/4" Drive / 8mm Adaptor
MSRP
$29.99
FSA MegaEvo BB Installation Tool SKU
Model No.
158856 Socket E0410 158855 Spanner E0373 800-283-2453
MSRP
$59.99 $24.99
127252 Isis Bottom Bracket Installation Tool
599
Tools
Tools - Bottom Bracket Tools
Park 1501 Repair Pins
Replacement pins for HCW-4. Pins are 2.3mm (0.0906 inch) diameter. 112315 1501 Repair Pins
SKU
Model No.
MSRP
112315 1501
Park BBT-10 Adjusting Cap Tool
Designed to remove and install adj. caps on Shimano Hollwtech II crank/BB sytems. 148040 BBT-10 Adjusting Cap Tool
SKU
Model No.
MSRP
148040 BBT-10
$14.49
Park BBT-18 Bottom Bracket and Chainring Lockring Tool
Heavy duty cast tool for removing and installing. Shimano and Isis drive 8 notch BB cups. Outside diameter has been changed to fit Isis overdrive BB’s. SKU
136877 BBT-18 Bottom Bracket and Chainring Lockring Tool
Model No.
136877 BBT-18
MSRP
$15.59
Park BBT-19 Bottom Bracket Tool
The new BBT-19 is a heavy duty, shop quality tool for installing and removing 16-notch external bearing bottom bracket cups. Made from investment cast steel, the BBT-19 can be used w/ either a 3/8" drive torque wrench, 3/8" ratchet driver, FRW-1 Freewheel Remover Wrench, or 1" wrench. SKU
Model No.
136869 BBT-19
MSRP
$22.49
136869 BBT-19 Bottom Bracket Tool
Park BBT-22C Shimano Cartridge Bottom Bracket Tool
Used to install and remove Shimano and Isis drive splined bb cup’s. Uses a flat tooth profile to ensure maximum engagement. Can be turned w/ 3/8" drive torque wrench, 3/8" ratchet, 32 mm wrench, 1" wrench or FRW-1. SKU
Model No.
136875 BBT-22
MSRP
$18.29
136875 BBT-22C Shimano Cartridge Bottom Bracket Tool
Park BBT-29 Bottom Bracket Tool
The BBT-29 is a double-ended bottom bracket wrench designed to fit 16-notch bearing cups w/ an outside diameter of 39mm (e.g. Shimano Dura-Ace 9000 series and XTR 980 series) as well as 16-notch bearing cups w/ an outside diameter of 48.5mm (e.g. FSA MegaExo). SKU
MSRP
158723 158723 BBT-29 Bottom Bracket Tool
Park BBT-30.3 Bottom Bracket Bearing Tool Set
Designed to remove and install bearing and bearing units used in BB30 and SRAM Press fit 30 BB assemblies. Includes two installation bushings used in conjunction w/ HHP-2 or HHP-3. Includes bearing remover. SKU
Model No.
148041 BBT-30.3
MSRP
$41.29
148041 BBT-30.3 Bottom Bracket Bearing Tool Set
600
SEATTLEBIKESUPPLY.COM
Tools
Tools - Bottom Bracket Tools
Park BBT-32C Shimano & Isis Bottom Bracket Tool
Economical and compact, this version of the BBT-22 tool is perfect for the home mechanic. The BBT-32 installs and removes Shimano and Isis Drive 20 tooth splined bottom bracket cups and features 32mm wrench flats. SKU
Model No.
139559 BBT-32
MSRP
$11.95 139559 BBT-32C Shimano & Isis Bottom Bracket Tool
101888 BBT-5 FR-11 Bottom Bracket Tool
123273 BBT-7 Lockring Tool
130940 BBT-9 Bottom Bracket Tool
148042 BBT-90.3 Bottom Bracket Bearing Tool Set
145422 CBP-3 Campagnolo Bearing Puller and Installation S
Park BBT-5 FR-11 Bottom Bracket Tool
• Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use w/o removal of cones and locknuts • Fits all Campagnolo cassette lockrings • Also fits Campagnolo Record, Chorus, Centaur and Athena bottom brackets •The outside diameter of the BBT-5/FR-11 is 22.8mm, and has 12 splines. SKU
Model No
MSRP
101888 BBT-5
Park BBT-7 Lockring Tool
Laser cut. Engages 5 of the lockring notches. For Dura-Ace & XTR. SKU
Model No
123273 BBT-7
MSRP
$18.39
Park BBT-9 Bottom Bracket Tool
Designed to remove and install Shimano Hollowtech II bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 notches of the bottom bracket cups, while the other end engages the 8 internal splines of crank arm adjustment cap. SKU
Model No.
130940 BBT-9
MSRP
$21.49
Park BBT-90.3 Bottom Bracket Bearing Tool Set
Designed to remove and install bearing and bearing units used in BB90, BB92, Shimano Press Fit, SRAM Press Fit GXP Race Face Press Fit and other press fit BB systems. Includes two installation bushings used in conjunction w/ HHP-2 or HHP-3. Includes bearing remover. SKU
Model No.
148042 BBT-90.3
MSRP
$46.95
Park CBP-3 Campagnolo Bearing Puller and Installation S
Designed and built to install and remove the pressed bearing used on Campagnolo and Fulcrum Ultra-Torque cranks. SKU
Model No.
145422 CBP-3
MSRP
$65.95
Park CBP-5 Campagnolo Power Torque Crank and Bearing Adapter Set
The CBP-5 is used in conjunction w/ the CBP-3 set to remove and install Power-Torque crank arms and right side crank bearings. SKU
MSRP
151525
$62.95
800-283-2453
151525 CBP-5 Campagnolo Power Torque Crank and Bearing Adapter Set
601
Tools
Tools - Bottom Bracket Tools
Park HCW- 5 Double End Lock Ring Spanner For lock rings on the traditional threaded bottom brackets. 109917 HCW- 5 Double End Lock Ring Spanner
118269 HCW-11 Adjustable BB Cup Wrench
SKU
Model No
MSRP
109917 HCW-5
$15.59
Park HCW-11 Adjustable BB Cup Wrench Fits slotted BB adjusting cups and cups w/ raised 16mm wrench flats. SKU
Model No.
MSRP
118269 HCW-11
$15.95
Park HCW-4 Box End Pin Spanner Wrench For traditional threaded bottom brackets. 36mm wrench. SKU
Model No
109916 HCW-4
109916 HCW-4 Box End Pin Spanner Wrench
109936 SPA-1 Hanger Pin Cup Spanner
MSRP
$18.95
Park SPA-1 Hanger Pin Cup Spanner Fits adjusting cups on most three piece cranks. SKU
Model No
109936 SPA-1
MSRP
$9.49
Park Spa-6 Adjustable Spanner Uses hardened replaceable pins. Designed for heavy duty use. SKU
Model No.
109940 Spa-6
MSRP
$18.49
Park TW-2 Torque Wrench SKU
Model No.
155281 TW-2
109940 Spa-6 Adjustable Spanner
MSRP
$52.95
155281 TW-2 Torque Wrench
Pedro’s BB Socket Holder
Holds socket to BB axle to prevent slipping. Works with both tapered and splined BB axles. SKU
MSRP
135062
$13.00
Pedro’s External Bearing BB Socket
Fits the latest external-cup BB designs. Pedro's has developed one of the industry's toughest and tightest external sockets to install and remove external bottom bracket cartridges. Socket accepts a half-inch drive
135062 BB Socket Holder
602
SKU
MSRP
140593
$20.00
140593 External Bearing BB Socket
SEATTLEBIKESUPPLY.COM
Tools
Tools - Brake Tools
Shimano TL-UN74-S Cartridge Bottom Bracket Tool Shop quality tool for removing and installing Shimano splined 20 tooth BB cups SKU
MSRP
122420
$19.99
Truvativ GXP HOWITZER BB Install Tool Designed for Truvativ GXP and Howitzer BB Installation and removal. SKU
MSRP
122420 TL-UN74-S Cartridge Bottom Bracket Tool
136745 GXP HOWITZER BB Install Tool
136745
Truvativ Isis Lockring BB Install Tool Isis BB Cup remover. SKU
Spec's
MSRP
128295 w/ 1/2" Fitting
XLC Bottom Bracket Removal Tool w/ Handle SKU
MSRP
143485
$25.00
128295 Isis Lockring BB Install Tool
143485 Bottom Bracket Removal Tool w/ Handle
XLC Bottom Bracket Tool Shimano Isis For use w/ 24 mm width across flats or 1/2" ratchet. SKU
Color
157122 Black 143488 Silver
MSRP
$19.00 $22.00
Tools - Brake Tools 143488 Bottom Bracket Tool Shimano Isis
Avid Hand-Held Hydraulic Hose Barb Driver
148606 Hand Held Hydraulic Hose Barb Driver
The Avid Hand-held Hydraulic Hose Barb Driver tool allows for easy installation of both barbed and threaded hose barbs for super-quick hose length customization. Hydraulic hose is conveniently held in place w/ a locking clamp and w/ a twist of the handle hose barbs are easily driven into a freshly cut hydraulic hose. No more pliers. Works w/ RockShox XLox and Reverb hydraulic hoses too SKU
Color
148606 Black
MSRP
$34.00
Avid Hand-Held Hydraulic Hose Cutter
Quick, precise and easy to use, the Avid hand-held hydraulic hose cutter makes shortening hydraulic hoses a snap. Spring-loaded and includes replacement blades. Works w/ RockShox XLox and Reverb hydraulic hoses too. SKU
Color
148605 Black
800-283-2453
MSRP
$23.00
148605 Hand Held Hydraulic Hose Cutter
603
Tools
Tools - Bottom Bracket Tools
Park BT-2 Fourth Hand Locking Brake Tool 109886 BT-2 Fourth Hand Locking Brake Tool
134513 DT-2C Rotor truing Fork
The Park Tool Cable Stretcher pulls both gear and brake cables tight. With coated blue handle. SKU
Model No
109886 BT-2
MSRP
$48.95
Park DT-2C Rotor truing Fork
Specially designed and precisely manufactured to gently adjust bent disc brake rotors. The DT-2 features two different slot depths and is laser cut from high quality stainless steel. Center handle is vinyl dipped for comfort. SKU
Model No
134513 DT-2C
MSRP
$18.59
Park DT-3 Rotor Truing Gauge Accurately gauge the straightness of disc rotors. Infinitely adjustable. Finely threaded indicator. Works with any diameter rotor. 135637 DT-3 Rotor Truing Gauge
135638 DT-3i Dial Indicator Kit for DT-3
SKU
Model No
135637 DT-3
MSRP
$44.95
Park DT-3i Dial Indicator Kit for DT-3 Bolts directly to DT-3 for greater accuracy. SKU
Model No
135638 DT-3i
MSRP
$44.95
Park PP-1.2 Hydraulic Brake Piston Press
The unique, wedge-shaped PP-1.2 slides into a hydraulic disc brake caliper to pre-set the piston when replacing pads, aligning pads, and performing other service procedures. Makes hydraulic disc brake maintenance and repair faster and easier.
154437 PP-1.2 Hydralic Brake Piston Press
145087 TS-2di Gauge Set for TS-2.2
SKU
MSRP
154437
$20.95
Park TS-2di Gauge Set for TS-2.2
Measures a wheel’s lateral and radial run-out to .01mm. Mounts easily to any TS-2 or TS-2.2 Truing Stand. Enables user to set and follow tolerances for each wheel. Includes two dials, mounting brackets and specially designed tips. SKU
Model No.
145087 TS-di
MSRP
$139.95
Pedro’s Cable Puller
Applies desired amount of tension on cables while tightening pinch bolts. Perfect fit in left hand while adjusting brakes. Heat-treated tool steel construction. Ergonomic grips for added comfort and control. Built-in thumb lock . Lifetime warranty. SKU
MSRP
138900
$30.00
138900 Cable Puller
604
SEATTLEBIKESUPPLY.COM
Tools - Cable Cutters
Tools
XLC Cable Puller 4th Hand Tool
Pulls and holds brake and gear cables for precise adjustment. Coated handles provide better grip. SKU
MSRP
157123
$16.00 127677 CN-10C Professional Cable & Housing Cutter
Tools - Cable Cutters
Park CN-10C Professional Cable & Housing Cutter Dual density grips, built-in crimper and forming hole. Cold forged, heat treated steel with precision ground cutting jaws. SKU
Model No.
127677 CN-10C
MSRP
$37.95
131839 Cable Cutter
Pedro’s Cable Cutter
Heat-treated tool steel construction and comfortable, cushioned handles make this an industry favorite. Quickly and easily cuts brake and derailleur cables, housing and other wire. Lifetime warranty. SKU
MSRP
131839
$35.00
Shimano TL-CT10 Wire Cutter
108394 TL-CT10 Wire Cutter
Designed specifically for bicycle cables and casing. SKU
MSRP
108394
Shimano TL-CT12 Wire Cutter
Designed specifically for bicycle cables and casing. Awl on one end. SKU
MSRP
153141
$84.99
XLC Cable and Housing Cutter
153141 TL-CT12 Wire Cutter
Cable cutter for inner wires and outer casings. SKU
MSRP
143535
$23.00
143535 Cable and Housing Cutter
800-283-2453
605
Tools
Tools - Chain Tools Tools - Chain Tools Cyclo Rivoli Uniglide Chain Tool 118702 Uniglide Chain Tool
Updated to work w/ all 3/32" chains (except 9 speed). SKU
Model
118702 MK2/Rivex
Spec's
MSRP
Single, 5-8s
Cyclo Rivoli Universal Chain Tool Works on 7, 8, or 9 speed chains. Longer handle. SKU
Spec's
MSRP
124349 9s
124349 Universal Chain Tool
Lifu Chain Tool SKU
Spec's
MSRP
125774 For 3/16" Chain
125774 Chain Tool
Park CC-2 Chain Checker Wear Gauge
Find out if a chain has stretched beyond acceptable limits with this handy tool. SKU
Model No
121750 CC-2
121750 CC-2 Chain Checker Wear Gauge
MSRP
$24.49
Park CC-3.2C Chain Wear Indicator
The CC-3.2 is a “go-no go� gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings. SKU
Model No.
150892 CC-3.2
MSRP
$10.69
150892 CC-3.2C Chain Wear Indicator
Park CT-11 Rivet Peening Tool
For Campagnolo 11-speed chain. The CT-11 will not install or remove chain rivets. Its sole function is to peen and secure the end of the Campagnolo 11-speed connecting rivet. SKU
Model No.
145423 CT-11
MSRP
$53.95
Park CT-3.2 Chain Tool 145423 CT-11 Rivet Peening Tool
A shop favorite updated for 2013. The CT-3.2 features an adjustable locating shelf so it will remove and install the chain rivet on any bike chain, from 5 to 11-speed derailleur chains to 1/8"and 3/16" single-speed chains. Made from investment cast steel, the CT-3.2 has a comfortable to use size and fine thread for making easy work of even the toughest rivets. Replaceable pin (part CTP). Note: CT-3.2 will not peen the rivets on Campagnolo 11-speed chains. SKU
Model No.
155812 CT-3.2
MSRP
$34.95
155812 CT-3.2 Chain Tool
606
SEATTLEBIKESUPPLY.COM
Tools
Tools - Chain Tools
Park CT-4.2 Master Chain Tool
Recently modified to work w/ Shimano Dura-Ace CN-7900 chain, a model the original CT-4 did not fit. • Designed to work w/ most high quality, narrow profile derailleur chains (will not fit Wipperman chains). SKU
Model no.
MSRP
145099 CT-4.2
145099 CT-4.2 Master Chain Tool
155813 CT-4.3 Master Mechanic Chain Tool
101111 CT-5 Compact Chain Tool
155814 CT-6.3 Folding Chain Tool w/ Peening Anvil
Park CT-4.3 Master Mechanic Chain Tool
Specially designed to work w/ the tight tolerances and narrow profiles of 10 and 11-speed chains, the powerful CT-4.3 is a precision tool that can be used to install and remove most 5 to11-speed derailleur chains. Without a doubt the most accurate chain tool we’ve ever built. SKU
Model No.
155813 CT-4.3
MSRP
$66.95
Park CT-5 Compact Chain Tool The best portable chain tool. SKU
Model No
101111 CT-5
MSRP
$16.95
Park CT-6.3 Folding Chain Tool w/ Peening Anvil
Now 11-speed compatible, the CT-6.3 removes and installs chain rivets in all derailleur chains. Smooth and powerful, this handy take-along is encased in a stainless steel shell, which becomes a comfortable handle when opened. Built-in anvil to peen Campagnolo 11-speed chain rivets. SKU
Model No.
MSRP
155814 CT-6.3
Park CTP Replacement Pin
These pins fit Park Tool's CT-1, CT-2, CT-3, CT-5 and CT-7 Chain Tools. Made from hardened alloy tool steel. One pin. SKU
Model No.
109898 CTP
109898 CTP Replacement Pin
MSRP
$1.69
Park CTP-4K Replacement Pin Kit for CT-4
Includes four ( 4 ) hardened replacement pins and one replacement ball bearing for CT-4 chain tool. SKU
Model No.
142545 CTP-4K
MSRP
$16.95
142545 CTP-4K Replacement Pin Kit for CT-4
Park MLP-1.2 Master Link Pliers
Many bicycle derailleur chains use a "master link" to separate the chain during removal, and to join the chain for installation. While most of these type master link can be removed by hand, oftentimes dirt, corrosion & wear can make the process difficult. MLP-1.2 Master Link Pliers make the removal & installation of these links quick and easy. SKU
158042
800-283-2453
MSRP
158042 MLP-1.2 Master Link Pliers
607
Tools
Tools - Chain Tools
Pedro’s Pro Chain Tool 2.0
A Pro level chain tool. Ergonomic elastomer handles, updated replaceable bridge design, precision 10-speed spacing, includes 2 replacement pins stored in the handle!
140589 Pro Chain Tool 2.0
SKU
MSRP
140589
$60.00
Pedro’s Pro Chain Tool Replacement Pins Replacement pins for Pedro’s Pro 2.0 chain tool. SKU
MSRP
140590
$6.00
Pedro’s Tutto Chain Tool
Tutto's Proprietary Speed Dial (patents pending) handles single through 8-, 9-, 10-, and 11-speed chains. A fourth position on the Speed Dial provides the anvil required to flare the roller pin on Campagnolo 11-speed chains, per the manufacturer’s requirement. Dual-function RPG (Retracting Pin Guide, patents pending) eliminates misalignment and breakage. Also encloses guide pins to prevent loss, bending or breakage. Lifetime warranty. SKU
Spec's
145382 7 - 11s
Color
MSRP
Black
$120.00
145382 Tutto Chain Tool
Salt BMX Chain Tool
CrMo chain tool for use w/ 1/8" chains. Spare pin & half-link alignment pin stored in handle. SKU
MSRP
148534
Shimano TL-CN28 Chain Cutter 6-11s Chain SKU
MSRP
155969 148534 BMX Chain Tool
Shimano TL-CN32 Chain Cutter For use w/ 11 speed chain. SKU
Color
MSRP
155406 Black
XLC Chain Tool Replacement Pin 10 per Box Replacement pins for XLC chain tool. 146913 Chain Tool Replacement Pin 10 per Box
608
SKU
Qty
146913 10/Box
MSRP
$17.00
SEATTLEBIKESUPPLY.COM
Tools
Tools - Cleaning Tools
XLC Hyperglide Uniglide Chain Tool SKU
MSRP
143541
$15.00
143541 Hyperglide Uniglide Chain Tool
Tools - Cleaning Tools
Finish Line Easy Pro Brush Set
Five different brushes, each uniquely shaped to reach and clean all bicycle parts. SKU
MSRP
128272
$17.99 128272 Easy Pro Brush Set
Finish Line Gear Floss
Gear Floss is a perfect detailing tool for cleaning between gears and all the tight spots on your bike. Attracts and holds dirt and grime. The special microfiber ropes are highly tear-resistant and can be washed. Each rope is 20" long. SKU
Size
149071 20" Microfiber Rope
Qty
Color
MSRP
20/Pkg
White
$6.99
Finish Line Grunge Brush
Scrub the all four sides of the chain w/ the compact bristles of the Grunge Brush. Use the long Bristles to clean tight and hard to reach areas: Sprockets;Derailleurs; Cranks; Brakes; Pedals, etc. SKU
MSRP
138664
$12.99 149071 Gear Floss
138664 Grunge Brush
135676 Shop Quality Chain Cleaner
132937 Shop Quality Chain Cleaner Kit
Finish Line Shop Quality Chain Cleaner
Heavy-duty industrial resin body, will not crack or break when dropped. New exit angle and foam exit eliminates dripping. A new quick and simple attachment design and an oversized magnet to collect metal filings. SKU
MSRP
135676
$24.99
Finish Line Shop Quality Chain Cleaner Kit
Heavy-duty industrial resin body, will not crack or break when dropped. New exit angle and foam exit eliminates dripping. A quick and simple attachment design and an oversized magnet to collect metal filings. Includes 4oz Ecotech degreaser and 2oz Teflon Plus Lubricant. SKU
MSRP
132937
$34.99
800-283-2453
609
Tools
Tools - Cleaning Tools
Finish Line Starter Kit 1-2-3
The Starter Kit 1-2-3 includes: a Grunge Brush; 4oz bottle of Multi Degreaser, and a 2oz bottle of Teflon Dry Lube. Everything needed for quick and easy drive train cleaning. 149070 Starter Kit 1-2-3
SKU
MSRP
149070
$19.99
Park BCB-4 Bike Cleaning Brush
A set of 4 brushes, including the GCS-1 for all bicycle cleaning jobs. Also includes tire & frame brush, sponge brush, and conical detail brush. Sure grip dual density handles. SKU
127761 BCB-4 Bike Cleaning Brush
Model No.
MSRP
127761 BCB-4
$20.95
Park CG-2.2 Chain Gang
Includes: • CM-5.2 Chain Scrubber • GSC-1 GearClean Brush • 8 oz bottle of CB-2 Citrus Chain Brite • The CG-2 works on all derailleur bikes and many 3-speed and coaster brake bikes. SKU
Model No.
MSRP
152903 CG-2.2
152903 CG-2.2 Chain Gang
$34.95
Park CM-5.2 Cyclone Chain Scrubber
Keeping your chain clean is an essential part of good bike maintenance. The CM-5.2 Cyclone Chain Scrubber uses an extra large solvent reservoir and a series of rotating brushes to get chains really clean. SKU
Model No.
MSRP
152904 CM-5.2
$26.49
Park GSC-1C Gear System Cleaner Brush 152904 CM-5.2 Cyclone Chain Scrubber
Tough nylon bristles clean the derailleur and chain. Saves wear and tear on your chain and freewheel. SKU
Model No
MSRP
114976 GSC-1
$4.95
Park RBS-5 Replacement Brush Set for Cyclone Chain Tool Includes one geared scrubbing brush, two rolling brushes and two wicking sponges. 114976 GSC-1C Gear System Cleaner Brush
SKU
Model No.
126786 RBS-5
MSRP
$10.49
126786 RBS-5 Replacement Brush Set for Cyclone Chain Tool
610
SEATTLEBIKESUPPLY.COM
Tools - Cleaning Tools
Tools
Pedro’s Chain Keeper
The Chain Keeper is inserted into the right rear dropout when the wheel is removed for cleaning, storing, or transporting bikes. A cherished item by pro mechanics that have to maintain a crowded team truck. Designed to maintain chain tension during cleaning. Quick release lever allows for fast installation and removal. SKU
MSRP
138898
$15.00
138898 Chain Keeper
Pedro’s Pro Brush Kit
Bicycle specific brushes designed to detail any bike. Brushes includes: wheel brush, Toothbrush, parts cleaning brush, wand brush and twisted wire brush to clean even the most hard to reach places of a bicycle. Bag allows for easier storage and faster drying of brushes. SKU
MSRP
140585
$22.00
Pedro’s Toothbrush Gear Cleaning Brush
140585 Pro Brush Kit
Durable double-ended brush, ideal for cogs, derailleurs, chainrings. Solvent resistant synthetic handle & bristles. SKU
MSRP
126860
$7.00
126860 Toothbrush Gear Cleaning Brush
White Lightning The Trigger Chain Cleaning System Combines the cleaning power of Clean Streak with the scrubbing action of a chain cleaner. Chain cleaner mounts to a 12oz bottle of clean streak and sprays the degreaser directly on the chain while the brushes and chain scrubber break down and scrub away grease, grime and dirt. SKU
MSRP
133072
$25.99
XLC Brush Set SKU
MSRP
143543
$22.00
133072 The Trigger Chain Cleaning System
XLC Sprocket Cleaning Set SKU
MSRP
143542
$15.00
143543 Brush Set
143542 Sprocket Cleaning Set 800-283-2453
611
Tools
Tools - Cone Wrenches Tools - Cone Wrenches
Park DCW Double End Cone Wrenches
Designed for the home mechanic or occasional user. They're made of thin steel and are nickel plated and heat treated for long use
109909 DCW Double End Cone Wrenches
SKU
Model no
Size
MSRP
109909 109910 111089 121567
DCW-1C DCW-2C DCW-3C DCW-4C
13/14mm 15/16mm 17/18mm 13/15mm
$4.95 $4.95 $4.95 $4.95
Park MWF-1 Flare Nut Wrench
This 8/10mm wrench is to be used to safely open and close the compression nut on hydraulic brake calipers and levers. Featuring angled heads for easy access and unique, semi-box openings to reduce the risk of damaging hydraulic fittings or lines. SKU
Model No.
158467 MWF-1
Size
MSRP
8/10mm
Park SCW Series Shop Cone Wrenches
Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality. Thin enough to use on the narrowest of adjusting cones, the SCW Shop Cone Wrenches have a long, vinyl dipped handle for leverage and comfortable use. 125438 SCW Series Shop Cone Wrenches
SKU
Model no
Size
MSRP
103856 103857 103858 103859 103860 103861 125438 127681 148050 136870 145097 145098 158468 142518
SCW-13 SCW-14 SCW-15 SCW-16 SCW-17 SCW-18 SCW-19 SCW-20 SCW-21 SCW-22 SCW-23 SCW-24 SCW-26 SCW-28
13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm 23mm 24mm 26mm 28mm
$8.95 $8.95 $8.95 $8.95 $8.95 $8.95 $8.95 $8.95 $8.95 $8.95 $8.95 $8.95 $8.95 $8.95
Park Shop Cone Wrench Set
Includes all cone wrenches produced by Park Tool: 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, and 28mm sizes. The wrenches in the SCW-SET.2 use Park's “Y" head design for strength and a durable industrial phosphate finish. The handles are vinyl-dipped for comfort and sure handed grip. SKU
Model No.
158223 SCW-SET.2
612
Spec's
MSRP
13 pieces
$69.95
SEATTLEBIKESUPPLY.COM
Tools - Crank & Chainring Tools
Tools
XLC Long Handle Cone Wrench No slip plastic handle. Shop-quality tooling. SKU
Size
MSRP
143501 143503 143504 143507
13mm 15mm 16mm 19mm
$8.00 $8.00 $8.00 $8.00
143501 Long Handle Cone Wrench
Tools - Crank & Chainring Tools
142547 CCP-22C Cotterless Crank Puller
Park CCP-22C Cotterless Crank Puller
Long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. Fits all cranks using 22mm x 1 threads. SKU
Model No.
142547 CCP-22C
MSRP
$15.29
Park CCP-44C Crank Puller
For Shimano splined crank arms. With a stronger, smoother operating tip. Won't work on square spindles. SKU
Model No.
142548 CCP-44C
142548 CCP-44C Crank Puller
MSRP
$15.89
Park CCW-5C Crank Bolt Wrench
Features both a 14mm socket and 8mm hex wrench on a long, comfortable handle. SKU
Model No.
134518 CCW-5C
MSRP
$11.29
Park CDG-2 Chainring Diameter Gauge
Selecting a replacement chainring requires knowing the BCD. The CDG-2 quickly and easily measures BCD for a variety of four & five bolt chainring patterns. Made from anodized aluminum w/ permanently laser engraved markings. The CDG-2 includes a center-to-center measuring scale and a reference chart to help determine less common chainring patterns. SKU
Model No.
159289 CDG-2
134518 CCW-5C Crank Bolt Wrench
MSRP
$32.95
Park CNW-2 Chainring Nut Wrench
136364 CNW-2 Chainring Nut Wrench
Double ended to fit most slotted-type nuts. SKU
Model No.
136364 CNW-2
MSRP
$3.95
Park CWP-7C Crank Puller/ Wrench
Has two rotating tips, 11.3mm and 16.3mm for use w/ splined Octalink and Isis drive crank arms. SKU
Model No.
142546 CWP-7C 800-283-2453
MSRP
$14.95
142546 CWP-7C Crank Puller/ Wrench
613
Tools
Tools - Crank & Chainring Tools
Pedro’s Universal Crank Remover Tool
Nice long comfortable handle. 8mm hex for axle bolt removal. Fits splined and square taper crank spindles. SKU
Spec's
MSRP
132999 w/ Handle
132999 Universal Crank Remover Tool
148750 Device Crank Installation Tool
$25.00
Redline Device Crank Installation Tool Works on all 19mm 48-spline Device cranks, and many others as well. SKU
Size
MSRP
148750 19mm
$11.99
Shimano TL-FC15 105 Crank Arm Plug Tool SKU
MSRP
124274
$5.49
Shimano TL-FC16 Crank Plug Tool SKU
Spec's
MSRP
130638 for Hollowtech II 124274 TL-FC15 105 Crank Arm Plug Tool
$1.49
130638 TL-FC16 Crank Plug Tool
Shimano TL-FC21 Chainring Bolt Peg Spanner
Use one end of this spanner for installation and removal of chainring bolts. Use the other end for Shimano one-key crank release bolds. SKU
MSRP
120479
$5.49
Shimano TL-FC32 BB Install Tool SKU
Spec's
MSRP
130639 For Hollowtech II 120479 TL-FC21 Chainring Bolt Peg Spanner
$16.99
130639 TL-FC32 BB Install Tool
Shimano TL-FC35 XTR Crank Arm Plug Tool Crank arm installation and removal tool For 2007 Model XTR crank sets SKU
Model
147312 2007
MSRP
$50.99
XLC Crank Arm Extractor
ISIS model is for use w/ 8mm hex or 15mm flat wrenches to remove crank arms from ISIS or Octalink pipe spindle BB's. Square model is for use w/ 15mm flat wrenches to remove crank arms from most Square Taper spindle BB's and features a 14mm socket to fit most crank bolts. SKU
147312 TL-FC35 XTR Crank Arm Plug Tool
614
143489 Crank Arm Extractor
Model
143489 ISIS 157121 Square
MSRP
$10.00 $15.00
SEATTLEBIKESUPPLY.COM
Tools - Cutting Tools
Tools
XLC Crank Arm Puller w/ Handle Crank extractor on a 6" no slip black handle. SKU
MSRP
143486
$25.00
XLC External BB Cup Wrench
Fits Shimano Hollowtech II & Truvativ GXP external Bottom Bracket cups. Crank Arm dust cap remover included. SKU
MSRP
143484
$27.00
143486 Crank Arm Puller w/ Handle
143484 External BB Cup Wrench
Tools - Cutting Tools 100148 BTS-1 Bottom Bracket Tap & Face Cutter
Park BTS-1 Bottom Bracket Tap & Face Cutter
The BTS-1 is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. SKU
Model No
100148 BTS-1
MSRP
$599.95
Park CF-2 Tool Cutting Fluid
Environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. Can effectively be used on all metals. 8 oz bottle. SKU
Model No.
134579 CF-2
134579 CF-2 Tool Cutting Fluid
MSRP
$13.49 149197 CSB-1 Carbon Cutting Saw Blade
Park CSB-1 Carbon Cutting Saw Blade
12" Tungsten steel hacksaw blade specially designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc. Fits Park Tool SAW-1 Hacksaw and most 12" hacksaws. SKU
Model No.
149197 CSB-1
MSRP
$8.49
140347 SAW-1 Hacksaw
Park SAW-1 Hacksaw
Aluminum die cast frame construction, blade tension adjuster and comfortable handle. Includes one blade and accepts any 12" (300mm) hacksaw blade. SKU
Model No.
140347 SAW-1
MSRP
$22.95
Park SG-6 Threadless Fork Saw Guide
Designed to ensure a straight, clean cut on threadless forks, the SG-6 fits 1", 1-1/8" and 1-1/4" forks. A must for use with threadless fork systems. SKU
MSRP
100499
$37.95 100499 SG-6 Threadless Fork Saw Guide
800-283-2453
615
Tools
Tools - Cutting Tools
Park SG-7.2 Oversized Saw Guide
Accurately guides a hacksaw to cut aero-shaped seat masts and seat posts up to 3.5" (89mm), as well as fork steerer tubes and other round tubes from 1" to 1-3/4" (32mm to 45mm). The SG-7.2 features two different cutting slots —standard and carbon cutting blade widths — in a hardened steel body w/ molded contact points to protect tubes and frames.
121273 TAP Series Pedal Tap Set
SKU
MSRP
157633
$42.95
Park SG-8 Carbon Blade Saw Guide
Specially designed to accommodate wider, carbon specific saw blades, the SG-8 Saw Guide ensures a straight, clean cut on fork steerer tubes up to 1-1/4". The SG-8 accomodates blades up to 2.5mm (3/32") wide. SKU
MSRP
157634
$43.95
Park TAP Series Pedal Tap Set
To be used to clean up damaged threads, Includes Taps for RH and LH threads. SKU
118947 TAP-10 Rear Derailleur Hanger Tap
Model no
121273 TAP-3C 121272 TAP-6C
Size
MSRP
1/2" 9/16"
$36.95 $49.95
Park TAP-10 Rear Derailleur Hanger Tap 10mm x 1mm frame tap for derailleur hanger. SKU
Model No
118947 TAP-10
MSRP
$10.49
Tools - Frame & Fork Tools
155811 CRP-2 Adjustable Crown Race Puller
Park CRP-2 Adjustable Crown Race Puller
The CRP-2 is a precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork. The CRP-2 is fully adjustable, allowing precise, independent positioning of each blade around the crown race. Locating each blade independently provides flexibility to fit around crown race interferences. Universal design works w/ 1", 1-1/8", 1-1/4" and 1.5 forks (suspension or rigid) and crown races w/ outside diameters up to 64mm. SKU
Model No.
MSRP
155811 CRP-2
Park CRS-1 Crown Race Setting Tool Safely install any crown race with this convenient tool. SKU
121467 CRS-1 Crown Race Setting Tool
616
Model No
121467 CRS-1
MSRP
$84.95
SEATTLEBIKESUPPLY.COM
Tools - Frame & Fork Tools
Tools
Park CRS-15 Crown Race Setter for 1.5" Steer Column SKU
MSRP
140302
$83.29
140302 CRS-15 Crown Race Setter for 1.5� Steer Column
Park DAG-2 Derailleur Hanger Alignment Tool
Threads directly into the derailleur hanger. made of heavy-gauge steel and is chrome plated. SKU
Model No.
142549 DAG-2
MSRP
$74.95
Park DT-1.2 Disc Tab Mount Facing Tool
The DT-1.2 precisely machines frame and fork disk brake tabs, removing paint and material to ensure they are flat and parallel w/ the brakes pads and the rotor. Works on forks w/ 100mm open dropouts and forks w/ closed dropouts using 15mm and 20mm thru axles. Works on frames w/ 135mm open dropouts and frames w/ closed dropouts using 12mm thru axles in 135mm, 142mm and 150mm lengths SKU
Model No.
155815 DT-1.2
142549 DAG-2 Derailleur Hanger Alignment Tool
MSRP
$27.95
Park DT-4.2 Disc Post Mount Facing Tool
Engineered and built to accurately face frame and fork mounted disc brake posts. The DT-4.2 machines the posts parallel w/ each other, perpendicular to the rotor, and to an equal height. Includes axle for 100mm x 9mm and 135mm x 10mm spaced frames. Also will work w/ 130mm spacing. Fits 12mm thruaxle frames, 15mm thru-axle forks by using the included spacer and axle from frame/fork. Fits 20mm thru-axle forks using body of DT-4.2 directly, no spacer required. Includes to parallel gauges. SKU
Model No.
157312 DT-4.2
155815 DT-1.2 Disc Tab Mount Facing Tool
MSRP
$249.95
Park FFG-2 Frame / Fork Alignment Gauge
FFG-2 quickly determines whether rear frame or front fork dropouts are aligned and parallel. These Park Tool gauges adjust to compensate for various hub widths from 100 to 160mm. SKU
Model No.
136882 FFG-2
MSRP
$109.95
136882 FFG-2 Frame / Fork Alignment Gauge
Park Frame Alignment Gauge
Many bicycles will not shift or track properly because the front and rear wheels are not in line w/ the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop outs of the frame may be misaligned. With the Park Tool Frame Alignment Gauge the alignment can be checked quickly and accurately at the drop-out. Retractable pointer to fit all sizes and types of bicycles. SKU
Model No.
158220 FAG-2
MSRP
$49.95
Park HHP-2 Head & Hanger Cup Press Install head cups in standard and oversize frames the right way. SKU
Model No
109921 HHP-2 800-283-2453
MSRP
$169.95
109921 HHP-2 Head & Hanger Cup Press
617
Tools
Tools - Frame & Fork Tools
Park HHP-3 Home Mechanic Bearing Cup Press
Simple and economical, the HHP-3 is designed to install all sizes of head cups and one-piece bottom bracket cups 140007 HHP-3 Home Mechanic Bearing Cup Press
SKU
Model No.
MSRP
140007 HHP-3
$79.95
Park ISC-4 Internal Seat Tube Clamp 138260 ISC-4 Internal Seat Tube Clamp
Insert into frames’ seat tube and tighten knob. Keeps frames from being bent and damaged by clamps. Works on diameters from 24mm to 32mm. SKU
Model No.
MSRP
138260 ISC-4
$59.95
Park RT-1 Head Cup Remover 118339 RT-1 Head Cup Remover
Fits standard and oversize headsets. Strong, heat treated alloy steel w/ nickel finish. 1" & 1-18" SKU
Model No
MSRP
118339 RT-1
100739 TNS-1 Star Nut Setter
$35.95
Park TNS-1 Star Nut Setter
Use to install star nuts in 1" standard and 1-1/8" oversize threadless headset systems. SKU
Model No
MSRP
100739 TNS-1
$24.95
Park TNS-15 Threadless Star Nut Setter 1-1/4 & 1.5" The TNS-15 is designed to install star-fangled nuts used specifically w/ 1-1/4 and 1.5" headset systems SKU
MSRP
142517
$37.95
142517 TNS-15 Threadless Star Nut Setter 1-1/4 & 1.5”
Park TNS-4 Star Nut Setter w/ Guide
Use to install star nuts in 1" standard and 1-1/8" oversize threadless headset systems. SKU
Model No.
136878 TNS-4
MSRP
$41.95
Tools - Freewheel & Cassette Tools 136878 TNS-4 Star Nut Setter w/ Guide
ACS Crossfire Freewheel Tool
ACS’ removal tool for the Crossfire Freewheel. 6-spline engagement fits all sizes of Crossfire Freewheels (13 - 22). SKU
Color
147890 Gun Metal
MSRP
$17.99
147890 Crossfire Freewheel Tool
618
SEATTLEBIKESUPPLY.COM
Tools - Freewheel & Cassette Tools
ACS Crossfire Spanner
14" steel wrench w/ forged ACS removal tools on either end. One for ACS Crossfire 6-spline freewheels, other for 16t-22t 4-prong freewheels. Tool fits into any tool chest, eliminates need for bench vice, pipe wrench, or other leverage devices. Accommodates 3/8" or 14mm axles. SKU
MSRP
151265
$31.99
Tools
151265 Crossfire Spanner
Answer BMX 28mm Flat Wrench
Answer’s 28mm flat wrench is for use w/ Alumilite hubs. Use this wrench to hold the cassette body while unthreading the cog for gear changes. SKU
Size
146788 28mm Flat Wrench
MSRP
146788 28mm
$27.95
Park FR Freewheel Removal Tools SKU
Model No
Spec's
MSRP
118873 158812 118874 118875 118876 118877 130957 102944 126450 130947
FR-1 FR-1.2 FR-2 FR-3 FR-4 FR-5 FR-5G FR-6 FR-7 FR-8
Shimano FW Shimano; Sun Race - 9s Suntour 2 Prong Suntour 4 Prong Atom Shimano/Sram/Sunrace w/ Guide 4-Prong BMX Falcon Flip-Flop BMX
$7.49 $6.95 $12.95 $6.95 $5.95 $7.95
118873 FR Freewheel Removal Tools
$7.49 $13.95
121560 FRW-1 Freewheel Wrench
Park FRW-1 Freewheel Wrench Use to hold freewheel tools in the absence of a vise. SKU
Model No
121560 FRW-1
MSRP
$49.95
Park HCW-17 Fixed Gear Lockring Wrench
Features two different radius hooks for a precise fit on most fixed-gear lockrings. 11-5/8" (29cm) in length for excellent leverage. SKU
Model No.
145120 HCW-17
145120 HCW-17 Fixed Gear Lockring Wrench
MSRP
$16.95
Park SPA-2 Hanger Pin Cup Spanner Fits one-key release dust caps and adjusting cone on most freewheels. SKU
Model No
109937 SPA-2
MSRP
$9.49
109937 SPA-2 Hanger Pin Cup Spanner
800-283-2453
619
Tools
Tools - Freewheel & Cassette Tools
100500 SR-1 Freewheel Cog Removal Tool
Park SR-1 Freewheel Cog Removal Tool
Use to remove cogs from freewheels (requires two) or to hold cassettes in place while you loosen the lockring. SKU
Model No
MSRP
100500 SR-1
147148 SR-11 11 Speed Chain Whip / Sprocket Remover
$23.95
Park SR-11 11 Speed Chain Whip / Sprocket Remover Chain fits all 5 to 11-speed cassettes and freewheels. Heat treated steel w/ molded handle for comfort. 1" (25.4mm) box-end wrench fits Park Tool Freewheel/Cassette Lockring Tools. SKU
Model No.
MSRP
147148 SR-11
$28.95
Park SR-18 Chain Whip / Sprocket Remover
Chain fits 1/8" fixed-gear sprockets. Heat treated steel w/ molded handle for comfort. 1" (25.4mm) box end wrench fits Park Tool Freewheel/Cassette Lockring Tools. SKU
147149 SR-18 Chain Whip / Sprocket Remover
Model No.
147149 SR-18
MSRP
$21.95
Park SR-2.2 Shop Chain Whip
15" Round vinyl dipped handle. Hardened bolts and nuts securely attach the chain to the handle and make chain replacement easy. Works on 5-11 speed cassettes. SKU
151551 SR-2.2 Shop Chain Whip
Model No.
151551 SR-2.2
MSRP
$39.95
Park SS-15C Single Speed Spanner
Designed and built especially for single speed bikes, the SS-15 is a forged spanner w/ a 15mm socket wrench for axle nuts, 15mm open end wrench for pedals, tire lever, and bottle opener. Just the right size and length (17cm/7") to take along or to wrench in the garage. SKU
Model No.
142521 SS-15C
MSRP
$19.49
142521 SS-15C Single Speed Spanner
Pedro’s Vice Whip
142722 Vice Whip
For the professional mechanic, Pedro’s has devised the most secure way to manage cogs of any size. The Vice Whip is the world’s first locking chain whip. Fits cogs from 11T to 23T, makes cassette removal safe and simple. Features: Locking jaws that won’t slip; Compact enough for the toolbox; Heat-treated steal tough enough for everyday use. *Not designed for use w/ 1/8" track cogs SKU
MSRP
142722
$65.00
Redline DNP Freewheel Tool
Used to removed the DNP freewheel found on some 2007 Redline BMX bikes. SKU
MSRP
137918
$17.99
137918 DNP Freewheel Tool
620
SEATTLEBIKESUPPLY.COM
Tools - Freewheel & Cassette Tools
Tools
Shimano Cassette Removal Chainwhip Tool Chainwhip for securing cassette while removing HG-style lockrings. Updated SR21 model features a rubber-coated handle. Foe 7/8/9/10 speed SKU
MSRP
148365
$59.49
148365 Cassette Removal Chainwhip Tool
Shimano TL-HG09 Capreo Lock Ring Tool SKU
Spec's
MSRP
142977 Capreo Specific
$13.99 122303 TL-LR15 Lockring Remover
Shimano TL-LR15 Lockring Remover SKU
Spec's
MSRP
122303 With Guide
$21.49
Wheels Manufacturing CRT-A1 Cog Remover Tool SKU
Size
118031 3/32"
Spec's
118031 CRT-A1 Cog Remover Tool
MSRP
Each
XLC 5-IN-1 Cog Removal Wrench
Five tools in one. 14/15mm wrench, 1/2" chain whip, lockring tool, and bottle opener. Includes a sturdy jersey bag to keep pockets/clothes from becoming greasy. SKU
MSRP
157137
$17.00
157137 5-IN-1 Cog Removal Wrench
XLC Adjustable BB Spanner SKU
MSRP
143490
$12.00 143490 Adjustable BB Spanner
XLC Cassette Lockring RemoverTools Shimano SKU
MSRP
143492
$13.00
XLC Freewheel Cog Remover Tool
143492 Cassette Lockring RemoverTools
• 3/32" chain, 6,7,8 Speed compatible • 1/8" chain, single track cogs or freewheels • 10" long bar for nice leverage SKU
Size
157134 1/8" 143491 3/32"
MSRP
$19.00 $19.00
143491 Freewheel Cog Remover Tool 800-283-2453
621
Tools
Tools - Freewheel & Cassette Tools
XLC Freewheel Remover Tool Fits Shimano, MF SKU
MSRP
143494
$8.00
143494 Freewheel Remover Tool
XLC HG Freewheel Lockring Remover Fits Shimano, HG . Use w/ 1/2" driver and 21mm spanner.
143496 HG Freewheel Lockring Remover
SKU
MSRP
143496
$13.00
XLC Suntour 2 Pin Freewheel Lockring Remover Suntour w/ 2 Pin. For use w/ 23mm wrench. SKU
MSRP
143495
$8.00
XLC Suntour 4 Pin Freewheel Lockring Remover Suntour w/ 4 Pin. For use w/ 23mm wrench. 143495 Suntour 2 Pin Freewheel Lockring Remover
SKU
MSRP
143493
$10.00
Tools - Hex Tools
143493 Suntour 4 Pin Freewheel Lockring Remover
Park 50th Anniversary 3-Way Hex
The AWS-50 is a limited editon version of Park Tool's famous three-way hex wrench. Available in limited quantities and only in 2013, the AWS-50 features a forged, two piece aluminum body (in Park blue), w/ a laser engraved logo. Hex wrenches are made from industrial strength, heat treated steel and gold plated to commemorate Park Tool's 50th Anniversary. SKU
Model No.
155442 AWS-50
Color
MSRP
Blue / Gold
$32.95
Park AWS-15 Y Hex Wrench 155442 50th Anniversary 3-Way Hex
The AWS-15 features a forged, two-piece, anodized aluminum body. 4/5/6mm hex wrenches are made from industrial strength, heat-treated & plated steel. SKU
Model No.
159287 AWS-15
MSRP
$32.95
Park AWS-1C Y Hex Wrench
Updated w/ a comfortable composite center. A must-have for every mechanic. 4/5/6mm hex sizes. SKU
Model No
109881 AWS-1
MSRP
$10.95
109881 AWS-1C Y Hex Wrench
622
SEATTLEBIKESUPPLY.COM
Tools - Hex Tools
Tools
Park AWS-3C Y-Hex Wrench Set
A wrench w/ smaller Allen keys is perfect for all those little Allen bolts. Size 2/2.5/3mm hex sizes. SKU
Model No
MSRP
122140 AWS-3
$11.95
122140 AWS-3C Y-Hex Wrench Set
Park AWS-7C Y-Hex Wrench 4mm hex, 5mm hex and T25 Torx style set Color coded rings to quickly find the correct size Heat treated for long life Chamfered tips for a perfect fit SKU
Model No.
MSRP
151524 AWS-7C
$11.95 151524 AWS-7C Y-Hex Wrench
Park AWS-8C Y Hex Balldriver
Bondhus Balldriver hex ends are great for hard to reach Allen bolts. Size 4/5/6mm hex sizes. SKU
Model No
MSRP
119443 AWS-8
$11.95
Park Hex Tool Wrench
Specially designed for cranks, free hubs and pedals. Built for speed, leverage and comfort. Dual density, ergonomically designed screwdriver handle molded over an extra long, extra deep, super strong hex. SKU
Model No.
140305 HT-6 140306 HT-8 140307 HT-10
Size
MSRP
6mm 8mm 10mm
$8.95 $8.95 $11.49
119443 AWS-8C Y Hex Balldriver
140305 Hex Tool Wrench
Park HR Hex Wrench
11mm Hex wrench is for alll 2005 Redline M10 Axle Cassette hubs freehub bodies. SKU
Model No
132840 HR-11 142893 HR-12 142894 HR-14
Size
MSRP
11mm 12mm 14mm
$7.95 $7.95 $16.49 132840 HR Hex Wrench
Park HR-8C 8mm Hex Wrench Designed for crank bolt removal. SKU
Model No
129524 HR-8
MSRP
$5.95
129524 HR-8C 8mm Hex Wrench
Park P-Handled Star-Shaped Wrenches
Blue nylon handle, high torque industrial steel, fits the bolt heads on many disc brake calipers and rotors. SKU
Model no
127680 PH-T25
MSRP
$8.59
127680 P-Handled Star-Shaped Wrenches 800-283-2453
623
Tools
Tools - Hex Tools
Park P-Handled Torx Wrench Set 158221 P-Handled Torx Wrench Set
A set of professional quality, star-shaped wrenches to fit Torx-style fasteners. Includes T6, T8, T10, T15, T20, T25, T30 and T40 sizes. Offset P-handle made from durable nylon and ergonomically designed for comfortable use. Made from through-hardened, high torque industrial steel for long life and precision fit. SKU
Model No.
158221 PH-T1
Spec's
MSRP
8 pieces
$46.95
Park PH-1 P-Handled Hex Wrench Set
Blue Nylon-handled long hex head wrenches w/ Bondhus tips and shorter hex tips at 90°. Holder can be mounted to wall. Set includes 2/2.5/3/4/5/6/8mm hex wrenches and holder. SKU
Model No
MSRP
126638 PH-1
$64.95
Park Professional L-Shaped Hex Wrench Set 126638 PH-1 P-Handled Hex Wrench Set
151540 Professional L-Shaped Hex Wrench Set
Industrial steel hex wrenches. balldriver tip on long shaft and straight hex on short shaft. Features chamfered tips and tight tolerances. Includes portable wrench holder. 1.2, 2, 2.5, 3, 4, 5, 6, 8 and 10mm hex sizes. Does not include speed bearing attachments. Bench/wall mount included on HXS-2.2 SKU
Model No.
MSRP
151540 HXS-1.2 151546 HXS-2.2
$23.95 $34.95
Pedro’s L Hex Wrench Set
Made from heat-treated tool steel to insure long-lasting performance. Extra length provides great leverage and provides access to hard-to-reach bolts. Includes: 1.5, 2, 3, 4, 5, 6, 8, and 10mm plus plastic holder. Lifetime warranty. SKU
MSRP
126849
$35.00
XLC Key Ring Hex Wrench Set Sizes include: 2/2.5/3/4/5/6mm plus a 8mm adaptor. 126849 L Hex Wrench Set
157132 Key Ring Hex Wrench Set
SKU
MSRP
157132
$11.00
XLC L-Shape Hex Wrench Set Sizes include: 2/2.5/3/4/5/6/8/10mm. With ball driver. SKU
MSRP
143534
$18.00
XLC Y Wrench
Each wrench sold separately. Photo shows hex and socket types. 143534 L-Shape Hex Wrench Set
624
143509 Y Wrench
SKU
Model
143509 Hex 146636 Socket
Size
MSRP
4/5/6 mm 8/9/10 mm
$10.00 $9.00
SEATTLEBIKESUPPLY.COM
Tools - Multi-Tools
Tools
Tools - Multi-Tools Crank Brothers B-14 Bit Multi Tool
Magnetized Socket driver / bit-based tool system w/ standard-sized stainless steel bits and stainless steel frame. Includes: 1.5, 2,2.5, 3,4, 5, 6, & 8mm Hex bits; #1 & #2 Philips; #1 & #2 flathead screwdriver, T-10 & T-25 Torx bits. SKU
Spec's
MSRP
156114 14 Functions
$27.00
Crank Brothers B-17 Bit Multi Tool
Magnetized Socket driver / bit-based tool system w/ standard-sized stainless steel bits and stainless steel frame. Includes: chain tool; #0 & #1 spoke wrenches; 1.5, 2,2.5, 3,4, 5, 6, & 8mm Hex bits; #1 & #2 Philips; #1 & #2 flathead screwdriver, T-10 & T-25 Torx bits. SKU
156114 B-14 Bit Multi Tool
Spec's
156115 B-17 Bit Multi Tool
MSRP
156115 17 Functions
$33.00
Crank Brothers B-8 Bit Multi Tool
Magnetized bit-based tool system w/ standard-sized stainless steel bits and stainless steel frame Includes 2.5, 3,4,5,6mm hex wrenches, T25 Torx wrench, Phillips and Flat-head screwdrivers SKU
Spec's
156113 B-8
Color
MSRP
Blk/Silver
$13.00
156113 B-8 Bit Multi Tool
Crank Brothers Multi-10 Multi-Tool
Includes a 2, 2.5, 3, 4, 5, 6 and 8mm hex, flat and Phillips screwdrivers, and a Torx t-25. 124 grams. 3.5. SKU
Weight
135002 124g 145343 124g
Spec's
Color
MSRP
10 Functions 10 Functions
Black Gold/Black
$20.00 $20.00
135002 Multi-10 Multi-Tool
Crank Brothers Multi-17 Multi-Tool
2/2.5/3/4/5/6 and 8mm hex, 8/10mm Open Wrenches, 4 Sizes of Spoke wrenches, Flat and Phillips Screwdrivers, Stainless Steel chain tool and a T-25 Torx. 3.5. SKU
Weight
135003 168g 145344 168g
Spec's
Color
MSRP
17 Functions 17 Functions
Black Gold/Black
$27.00 $27.00
135003 Multi-17 Multi-Tool
Crank Brothers Multi-19 Multi-Tool
2/2.5/3/4/5/6 and 8mm hex, 8/10mm Open Wrenches, 4 Sizes of Spoke Wrenches, 2 Flat and 2 Phillips Screwdrivers, Stainless Steel Chain Breaker and a Torx T-25. 3.5. SKU
Weight
135004 175g 145345 175g
Spec's
Color
MSRP
19 Functions 19 Functions
Black Gold/Black
$33.00 $33.00
135004 Multi-19 Multi-Tool
Crank Brothers Multi-5 Multi-Tool 3/4/5/6mm Hex / Phillips. Lifetime warranty. 3.5. SKU
Weight
135005 85g 145342 85g 159820 85g
800-283-2453
Spec's
Color
MSRP
5 Functions 5 Functions 5 Functions
Black Gold/Black Nickle
$13.00 $13.00 $13.00
135005 Multi-5 Multi-Tool
625
Tools
Tools - Multi-Tools
Park AWS-10C Fold Up Hex Wrench Set
These Allen wrenches come together in a fold-up tool perfect for rides. Weighs 105g w/ 7 funstions. SKU
Model No
121226 AWS-1 121226 AWS-10C Fold Up Hex Wrench Set
MSRP
$8.49
122141 AWS-11C Fold Up Hex Wrench Set
Park AWS-11C Fold Up Hex Wrench Set
Bike shop quality foldable wrench has all the popular sizes, including crank bolts and freehub body. Weighs 238 grams w/ 6 functions. SKU
Model No
122141 AWS-11
MSRP
$13.95
Park AWS-12C Metric & Standard Fold-Up Hex Set Metric wrenches include 2, 3, 4, 5 and 6mm. Fractional sizes are 3/16", 7/32", and 1/4". Weighs 17g w/ 8 functions. SKU
Model No
126451 AWS-12 126451 AWS-12C Metric & Standard Fold-Up Hex Set
MSRP
$10.49
121227 AWS-9 Fold Up Hex Wrench Set
Park AWS-9 Fold Up Hex Wrench Set
Three Allen wrenches, a flat head and a Phillips head screwdriver fold into a handy lightweight tool to carry w/ you anywhere you ride. Weighs 113g w/ 5 functions. SKU
Model No
121227 AWS-9
MSRP
$9.69
Park IB-1C I-Beam Mini Fold-up Hex/Screwdriver Features unique I-Beam handle surrounded by 3, 4, 5, 6 and 8mm hex wrenches and a straight blade screwdriver.
130945 IB-1C I-Beam Mini Foldup Hex/Screwdriver
130946 IB-2C I-Beam Mini Fold-up Hex Wrench/ Screwdriver/Torx
SKU
MSRP
130945
$15.49
Park IB-2C I-Beam Mini Fold-up Hex Wrench/ Screwdriver/Torx
I-beam handle w/ 1.5,2,2.5,3,4,5,6, and 8mm hex wrenches; a T25 Torx wrench; and flat screwdriver. strong, compact, lightweight, carded. Weighs 107g w/ 10 functions. SKU
MSRP
130946
$16.95
Park IB-3C I-Beam Mini Fold Up w/ Chain Tool
A complete take-along tool combining our award winning I-Beam technology with a full complement of emergency tools: 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches, T25 star driver, straight blade screw driver, composite wrapped tire lever, two spoke wrenches, and a 10-speed compatible chain tool. 134530 IB-3C I-Beam Mini Fold Up w/ Chain Tool
626
SKU
Model No
134530 IB-3
MSRP
$26.95
SEATTLEBIKESUPPLY.COM
Tools - Multi-Tools
Park MT-1C Multi-Tool
Two Allen wrenches (3-6mm), three socket wrenches, and a flat head screwdriver. Includes socket 8, 9, and 10mm. Weighs 42g w/ 9 functions. SKU
Model No
102422 MT-1C Multi-Tool
MSRP
102422 MT-1
$11.95
Park MTB-3.2 Premium Rescue Tool
Now w/ more tools, an upgraded chain tool and a sleeker, smaller size. The MTB-3.2 is built to tackle nearly any road or trailside emergency repair. It’s small enough to take along yet the tools feature enough leverage to make repairs quick and easy. SKU
Tools
Model No.
155817 MTB-3.2 Premium Rescue Tool
MSRP
155817 MTB-3.2
$31.95
Park MTB-7 Rescue Tool
2, 2.5, 3, 4, 5, 6, & 8mm hex wrenches. Tire levers (2). Phillips head screwdriver. Straight blade screwdriver. T25 star-shaped driver. 0.127", 0.130", & 0.136" spoke wrenches. 8, 9, & 10mm box end wrenches. Chainring nut wrench. Dust cap remover. Serrated knife. Bottle opener . Weighs 215g w/ 21 functions. SKU
Model No
128966 MTB-7 Rescue Tool
MSRP
128966 MTB-7
$19.95
Park TWS-2 Torx Wrench Set
The TWS-2 combines (T7, T8, T10, T15, T20, T25, T30, and T40) in a convenient fold-up set. Composite handle, comfortable to use, and slip resistant. Weighs 147g w/ 8 functions. SKU
Model No
128970 TWS-2 Torx Wrench Set
MSRP
128970 TWS-2
$20.95
Park TWS-3C Torx Y-Wrench
A Torx compatible 3-way wrench. T10, T25 and T30 wrench sizes in our classic three-way “Y” design. Useful for disc rotor bolts, some chainring bolts, and hydraulic work. SKU
Model No.
148049 TWS-3C Torx Y-Wrench
MSRP
148049 TWS-3C
$10.59
Topeak Alien II Multi-Tool
26 tools fold into a lightweight 2 piece body. 2/2.5/3/4/5/6/8/10mm Allen wrenches, T25 Torx, 8/9/10mm box wrenches(2X), 14/15g spoke wrenches, tire levers,mini pedal wrench, Phillips and flat screw drivers, knife, bottle opener, chain hook, chain tool and nylon carry bag. SKU
Weight
131084 270g
Spec's
MSRP
26 Functions
$49.95
131084 Alien II Multi-Tool
Topeak Alien XS Multi-Tool
16 function lightweight tool scaled down to the minimum size. 2/2.5/3/4/5/6/8mm Allen wrenches,8/9/10mm box wrenches, Phillips and flat screw drivers, knife & bottle opener to handle almost everything you could encounter while out on a ride. SKU
MSRP
150915
$24.95 150915 Alien XS Multi-Tool
800-283-2453
627
Tools
Tools - Multi-Tools
Topeak Hexus II Multi-Tool
Includes: 2, 2.5, 3, 4, 5, 6, 8mm Allen wrenches. A T25 Torx Bit, 14 and 15g spoke wrench, Chain tool and chain hook, Philips and flat head screw driver, 2 plastic tire levers. SKU
Weight
145349 167g
Spec's
MSRP
16 Functions
$27.95
Topeak Mini 18 Plus Folding Tool 145349 Hexus II Multi-Tool
18 tools fold into a forged and anodized alloy body. 2-10mm hex wrenches, T25, Flat and #1 Philips screwdrivers, spoke wrench, bottle opener, chain tools. Durable construction, neoprene case included. SKU
Weight
136629 182g
Spec's
MSRP
18 Functions
$32.95
Topeak Mini 20 Pro Tool w/ Bag
The Mini 20 Pro is a precision built, 20-function mini-tool designed to handle any road or trailside repair. The lightweight, high-strength forged alloy body resists torque during hard use and its proquality hardened steel tools will provide years of service. T10 and T25 Torx bits simplify hydraulic disc brake work. An integrated, cast CrMo chain tool nestles and locks between the tool body forming a low profile, snag-proof shape. The perfect tool for endurance racing, training and touring. SKU
136629 Mini 18 Plus Folding Tool
Weight
157281 151g
Spec's
Color
MSRP
20 Functions
Silver
$39.95
Topeak Mini 9 Folding Tool
9 tools fold into a forged and anodized alloy body. 2-8mm hex wrenches, T25 and #1 Philips screwdriver. Durable construction, neoprene case included. SKU
Weight
132856 92g
Spec's
MSRP
9 Functions
$16.95
Topeak Mini 9 Pro Tool w/ Bag
132856 Mini 9 Folding Tool
The Mini 9 Pro features 9 precision tools folded into a sleek, machined body. The rigid, high-strength forged alloy body resists torque during hard use and its pro-quality hardened steel tools are built to last. An integrated, folding tire lever secures inside tool body for a streamlined profile. The small size hides in a jersey pocket or saddle bag and is the minimal repair solution for long road rides or endurance mountain biking. SKU
Weight
157282 73g
Spec's
Color
MSRP
9 Functions
Silver
$24.95
Topeak X-Tool Multi-Tool
Includes: 2, 2.5, 3, 4 - 2 pieces, 5, 6, 8mm Allen wrenches. A T25 Torx, Philips screw driver, w/ a detachable 4/2.5mm hex key for two-handed repairs. SKU
Weight
158911 115g
Spec's
Color
MSRP
10 functions
Silver
$12.95
XLC 10-Piece Multi-Tool
Contains: Screwdriver cross. Screwdriver slot. Hexagon opening 2/2.5/3/4/5/6/8 mm. Torx T 25. 143546 10-Piece Multi-Tool
628
SKU
MSRP
143546
$20.00
SEATTLEBIKESUPPLY.COM
Tools
Tools - Multi-Tools
XLC 19-Piece Multi-Tool
Contains: Screwdriver cross. Screwdriver slot. Hexagon opening 2/2.5/3/4/5/6/8 mm. Tin opener. 8/9/10 mm box wrench. Spoke wrench. Tire lever. Torx T 25. Chain rivet remover. SKU
143545 19-Piece Multi-Tool
Spec's
MSRP
143545 19 Functions
$22.00
XLC 8-Piece Multi-Tool
Eight tool in one compact, lightweight, strong folding tool. Includes: 2, 3, 4, 5, 6mm hex wrenches; Philips & Flathead screwdrivers & a T25 Torx bit. 2" long, 1" wide, 1/4" thick. 79g. SKU
Spec's
MSRP
157130 8 Functions
157128 Micro Trail 11 Folding Tool
$17.00
XLC Micro Trail 11 Folding Tool
11 tools in 1 compact folding tool. Includes: 2, 2.5, 3, 4, 5, 6, & 8mm Hex wrenches; Philips and Flathead screwdrivers and 14g/15g spoke wrenches. SKU
Spec's
MSRP
157128 11 Functions
156705 Wood Tech 10 Multi-Tool
$23.00
XLC Wood Tech 10 Multi-Tool
Wood finished tool. Includes: 2; 2.5; 3; 4; 5; 6; 8mm hex key wrenches. Philips and flathead screwdrivers, T-25 Torx. SKU
Spec's
156705 10 Functions
Color
MSRP
Stained Wood
$22.00
XLC Wood Tech 11 Multi-Tool
Wood finished tool. Includes: 2; 2.5; 3; 4; 5; 6; 8mm hex key wrenches. Philips and flathead screwdrivers, T-25 Torx, and a chaintool. 156704 Wood Tech 11 Multi-Tool
SKU
Spec's
156704 11 Functions
Color
MSRP
Stained Wood
$27.00
XLC Wood Tech 8 Multi-Tool
Wood finished tool. Includes: 2; 2.5; 3; 4; 5; 6mm hex key wrenches. Philips and flathead screwdrivers. SKU
Spec's
156706 8 Functions
156706 Wood Tech 8 Multi-Tool
Color
MSRP
Stained Wood
$19.00
Tools - Other Tools
Park 50th Anniversary Pint Glass
Featuring a three-color Park Tool logo, the PNT-50 pint glass is made from heavyweight, dishwasher safe glass. SKU
Model No.
158222 PNT-50
Size
MSRP
Pint
$7.49
158222 50th Anniversary Pint Glass
630
SEATTLEBIKESUPPLY.COM
Tools - Other Tools
Tools
Park BO-2C Bottle Opener SKU
Model No.
MSRP
135373 BO-2C
$6.95
135373 BO-2C Bottle Opener
Park BO-3 Compact Bottle Opener
A compact opener featuring Park's world famous Blue handle and a 10mm wrench. Fits perfectly on a keychain or in a pocket or wedge pack. SKU
Model No.
MSRP
159288 BO-3
$5.95
Park BO-5 Wall Mount Bottle Opener
Looks like a bottle cage. Attaches to any wall. Includes a water bottle style cap catcher. SKU
Model No.
MSRP
148043 BO-5
$19.95
148043 BO-5 Wall Mount Bottle Opener
Park HMR-4 Shop Hammer
Fiberglass shaft, a soft touch rubber grip, and a two-sided head—steel on one side and a replaceable plastic head (part #293) on the other side. Weighs 2 pounds. SKU
Model No.
MSRP
146297 HMR-4
146297 HMR-4 Shop Hammer
$20.95
Park MB-1 Magnetic Bowl
This bench top accessory keeps small parts accessible and all in one place. 6" (15cm) in diameter and featuring an extra strong magnet, the MB-1 is available only in World Famous Park Tool Blue. SKU
Model No.
MSRP
134538 MB-1
$7.95
134538 MB-1 Magnetic Bowl
Park NP-6 Needle Nose Pliers
6" needle nose pliers ith 5 different crimping/grasping areas and a cutting blade. Forged, heat-treated cro-moly steel w/ an invisible spring and soft touch dual density grips. SKU
Model No.
MSRP
148046 NP-6
$24.95
Park Park BX-2 Blue Box Tool Case
Aluminum frame. Removable tool boards. Front hanging boards. Key and combo locks. 39 tool pockets. Straps and modules to accommodate a wide variety of tools. Uses a super tough HDPE plastic shell. SKU
Model No.
151559 BX-2
Color
MSRP
Blue
$249.95
148046 NP-6 Needle Nose Pliers
151559 Park BX-2 Blue Box Tool Case 800-283-2453
631
Tools
Tools - Other Tools
Park Park BXB-2 Backpack Harness for BX-2 and BX-1
Padded shoulders. Fully adjustable accessory pouches. Waist and chest straps. This harness works for both the BX-2 and BX-1 tool cases.
151560 Park BXB-2 Backpack Harness for BX-2 and BX-1
SKU
MSRP
151560
$99.95
Park PZT-2 Pizza Cutter
Updated version. PZT-2 is sharper and bigger to even handle those huge 29er pizza’s! SKU
Model No.
140346 PZT-2
MSRP
$15.95
Park RP-1 .9mm Straight Internal Snap Ring Pliers
Desgined and built w/ the specific needs of the bike shop mechanic in mind, the RP-1 is a forged pliers w/ .9mm Straight Internal snap ring tips. SKU
Model No.
MSRP
159294 RP-1
Park RP-2 1.3mm Bent Internal Snap Ring Pliers
Desgined and built w/ the specific needs of the bike shop mechanic in mind, the RP-2 is a forged pliers w/ 1.3mm Bent Internal snap ring tips. SKU
Model No.
MSRP
159295 RP-2
140346 PZT-2 Pizza Cutter
Park RP-3 1.3mm Bent External Snap Ring Pliers
Desgined and built w/ the specific needs of the bike shop mechanic in mind, the RP-3 is a forged pliers w/ 1.3mm Bent External snap ring tips. SKU
Model No.
MSRP
159296 RP-3
Park RP-4 1.7mm Bent Internal Snap Ring Pliers
Desgined and built w/ the specific needs of the bike shop mechanic in mind, the RP-4 is a forged pliers w/ 1.7mm Bent Internal snap ring tips. SKU
Model No.
MSRP
159297 RP-4
Park RR-12C Tape Measure
Small and handy, the RR-12 features a tough, composite housing and both Metric and English readings up to 12 feet (3.65m). SKU
134532 RR-12C Tape Measure
632
Model No.
134532 RR-12C
MSRP
$5.95
SEATTLEBIKESUPPLY.COM
Tools - Other Tools
Tools
Park SD Screwdriver Series
Shop quality screwdrivers designed for comfort and durability. Featuring dual density grips and heattreated, chrome vanadium tips and shafts. SKU
Model No.
Size
MSRP
134533 134534 139560 134535
SD-0 Phillips SD-2 Phillips SD-3 Flat SD-6 Flat Blade
1/8" 1/4" 3mm 6mm
$4.95 $5.95 $4.95 $5.95
134533 SD Screwdriver Series
Park Shop Screw Driver Set
Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts. The SD-SET includes all four of Park's shop grade screwdrivers in one handy set: SD-0; SD-2; SD-3, & SD-6. SKU
Model No.
158224 SD-SET
Spec's
MSRP
4 pieces
$18.95
Park Snap Ring Pliers Set
Desgined and built w/ the specific needs of the bike shop mechanic in mind, the RP-Set features three forged plierrs made for internal snap rings and one for external snap rings. Full set covers service needs on suspension forks to hydraulic brake levers, and anything in-between. Set includes: RP-1 .9mm Straight Internal; RP-2 1.3mm Bent Internal; RP-3 1.3mm Bent External, and RP-4 1.7mm Bent Internal Pliers. SKU
Model No.
MSRP
159293 RP-Set
$86.95
Park SP-7 Side Cutter Pliers
Professional quality 7" diagonal/side cutting pliers w/ soft touch dual density grips. Made from forged, heat-treated, Cro-Moly steel. SKU
Model No.
149196 SP-7 Side Cutter Pliers
MSRP
149196 SP-7
$25.95
Park Stainless Steel Spork
It's a spoon, it's a fork, it's the take along multi-tool of the tableware world. Ideal for any Park Tool fan that also eats. Makes the perfect gift! Made of 316 food grade stainless steel and vinyl dipped in world famous Park Tool Blue. Dishwasher safe. SKU
Model No.
158813 SPK-1
Color
MSRP
Blue
$7.49
Park Thru Axle Adaptor
The TS-TA makes it possible to adapt all Park Tool Truing Stands to work w/ 12mm, 15mm, 20mm, and 25mm thru axle front wheels, as well as Cannondale Lefty wheels. The TS-TA also work w/ the rear 135mm thru axle hubs in the TS-2.2 and TS-3. The TS-TA when used in the TS-8, TS-25, TS-15 or TS-5 will work w/ all rear thru axle hubs. For thru axle hubs greater than 135 (142, 150, 157, etc) in the TS-2.2, use the TS-2TA Thru Axle Adaptors. SKU
Model No.
158226 TS-TA
800-283-2453
158813 Stainless Steel Spork
MSRP
$60.95
633
Tools
Tools - Other Tools
Park TS-2TA Thru Axle Adaptors
Allows truing stand to be used w/ 12mm, 15mm, 20mm and 25mm thru axle hubs. Axles must be removed to use adaptors. Adaptors mount easily to TS-2.2, TS-2 or TS-8 Truing Stands. SKU
MSRP
145088
$19.29
145088 TS-2TA Thru Axle Adaptors
Park TW-5 Small Torque Wrench
The TW-5 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a component’s threaded fastener(s). Comes w/ its own protective case. • Ratcheting 1/4" drive w/ 3/8" adaptor • Dial-adjust system allows desired torque setting to be preset. • 3-15 Newton Meter range (26-132 Inch Pounds) • Adjustable to 0.4 Nm increments. Conversion scale on tool body SKU
MSRP
154242
$115.95
Park TW-6 Big Torque Wrench
154242 TW-5 Small Torque Wrench
154243 TW-6 Big Torque Wrench
The TW-6 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a component’s threaded fastener(s). Comes w/ its own protective case. • Ratcheting 3/8" drive • Dial-adjust system allows desired torque setting to be preset • 10-60 Newton Meter range (88-530 Inch Pounds) • Adjustable to 0.2 Nm increments • 38cm (15") length SKU
MSRP
154243
$132.95
Park UK-1C Utility Knife 134539 UK-1C Utility Knife
The UK-1 is a combination of aluminum and stainless steel and uses readily available hardware store utility knife blades. It also features a secure, quick-change blade system that locks open and closed. SKU
Model No.
134539 UH-1C
MSRP
$13.95
Pedro’s Demi Torque Wrench 142723 Demi Torque Wrench
Pedro’s Micrometer style torque wrench is now available in a smaller, compact size to address the increasing use of carbon on smaller, more delicate parts. Perfect for stem and seat binder bolts. Adjustable from 3 – 15 Nm. Easy to use locking mechanism. 1/4 inch drive works w/ Pedro’s Bit Set. Two year warranty. SKU
MSRP
142723
$150.00
Pedro’s Pro Torque Wrench 2.0 138902 Pro Torque Wrench 2.0
634
Pro Torque Wrench 2.0 is a Micrometer-style torque wrench makes an audible “click” when desired torque is reached. Adjustable from 6–30 Nm. and accurate to w/in +/- 4 percent. Easy to use locking mechanism. Quarter-inch drive, heat-treated construction for durability. Two year warranty. SKU
MSRP
138902
$145.00 SEATTLEBIKESUPPLY.COM
Tools - Pedal Tools
Tools
Pedro’s Pro Torque Wrench Hex Bit Set
Hex Bit Set - Designed for use w/ both the Pro Torque Wrench 2.0 and the Demi Torque Wrench. Includes Quarter-inch socket adapter and features 2, 2.5, 3, 4, 5, 6, & 8mm hex bits & T25 bit. Lifetime warranty. SKU
MSRP
138903
$15.00
138903 Pro Torque Wrench Hex Bit Set
XLC Torque Wrench Set
Helps prevent over-tightening of components that can cause stripping or breakage leading to failures. Sets in Newton Meters (nm) • Includes: 1/4" drive Torque wrench • 2, 2.5, 3, 4, 5, 6mm hex and T25 Torx sockets • Storage case • Conversion chart for inch pounds, foot pounds to Newton meters. SKU
MSRP
157126
$140.00
Tools - Pedal Tools
Ergon TP1 Pedal Cleat Tool
The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective. The tool is complimented by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. SKU
Model No.
MSRP
159637 159638 159639 159640 159641
Shimano SPD Shimano SPD SL Look Keo Crankbrothers Speedplay
$19.95 $19.95 $19.95 $19.95 $19.95
Park DP-1 Dummy Pedal
Installs quickly to take the place of a pedal when making adjustments during the assembly a new bike. SKU
Model No.
148045 DP-1
157126 Torque Wrench Set
148045 DP-1 Dummy Pedal
MSRP
$9.95
Park DP-2 Threaded Dummy Pedal
The DP-2 takes the place of a pedal when making adjustments during bike assembly. The DP-2 is similar to the DP-1, but the DP-2 is threaded for a more positive engagement w/ the threads of the crank arm. SKU
Model No.
159290 DP-2
MSRP
$12.95
Park HCW-16 Chain Whip And Pedal Wrench The double-ended HCW-16 combines a chain whip and a 15mm pedal wrench. SKU
Model No
130954 HCW-16 800-283-2453
MSRP
130954 HCW-16 Chain Whip And Pedal Wrench
$22.49
635
Tools
Tools - Pedal Tools
Park HCW-6 Head & Pedal Wrench
Pedal wrench fits all 9/16" pedals, and headset wrench fits 1" threaded headsets. Size 15mm/32mm. 109918 HCW-6 Head & Pedal Wrench
SKU
Model No
MSRP
109918 HCW-6
$15.59
Park PW-3 Pedal Wrench
Reinforced flats and round, vinyl coated handle. 15mm / 9/16" wrench. SKU
Model No
MSRP
103864 PW-3
$27.95
Park PW-4 Professional Pedal Wrench
Openings at 30° & 45° angle, 14" long handle, round vinyl dipped handle. 15mm wrench. SKU
Model No.
MSRP
125363 PW-4 103864 PW-3 Pedal Wrench
125363 PW-4 Professional Pedal Wrench
$35.95
Park PW-5 Home Mechanic Pedal Wrench Made from heat-treated spring steel and vinyl dipped for comfort. 11" (29 cm) long SKU
Model No.
MSRP
134515 PW-5
$11.95
134515 PW-5 Home Mechanic Pedal Wrench
Pedro’s Hex Pedal Wrench
Use these long Allen wrenches to install and remove pedals w/o 15mm flats. Large, comfortable handle, perfect length to provide excellent leverage SKU
Size
MSRP
130811 6mm 130812 8mm
$13.00 $15.00
XLC 15mm Pedal Wrech and Bottle Opener
15mm open end wrench w/cushioned handle fits pedals and axle nuts. Bottle opener is on the opposite end. SKU
MSRP
157136
$19.00
130811 Hex Pedal Wrench
XLC Pedal Wrench 10" no slip black handle. SKU
143497 Pedal Wrench
Size
143497 15mm
MSRP
$17.00
XLC Pedal Wrench 15mm and 14/15mm Box Wrench Multi purpose wrench. Vinyl handle. 143498 Pedal Wrench 15mm and 14/15mm Box Wrench
636
SKU
MSRP
143498
$20.00 SEATTLEBIKESUPPLY.COM
Tools - Spoke Tools
Tools
Tools - Spoke Tools
145094 Internal Nipple Wrench
Park Adjustable Spoke Wrench
The SW-10 Adjustable Spoke Wrench helps remove tight, stubborn or rounded nipples. Hardened, nickel plated and investment casting gives superior strength and durability for those tough wheel repairs. Fits any of the 80 gauge sizes listed for SW-0 through SW-2: .127" (3.23mm) nipple; .130" (3.30mm) nipple; .136" (3.45mm) nipple. SKU
Model No.
MSRP
158225 SW-10
$44.95
Park Bladed Spoke Holder
The BSH-4 is a valuable wheel building and truing aid that securely holds bladed spokes to prevent twisting. Four different sized slots to fit a wide variety of bladed spokes. Will hold blades from 0.8mm to over 2mm width. SKU
Model No.
MSRP
158219 BSH-4
$8.95
Park Internal Nipple Wrench
Extra long (3.25"/ 8.5cm) spoke wrench socket. Ergonomically-designed screwdriver handle. SKU
Model No.
145094 SW-16 148047 SW-16.3
Size
Spec's
MSRP
3.2mm 3/16"
Square Socket Hex Socket
$10.95 $10.95
109941 SBC-1 Spoke Gauge & Ruler
Park ND-1 Nipple Driver
The ND-1 is a time saver for wheel builders. Designed to quickly and easily drive conventional nipples on spokes w/ rims up to 50mm deep. Built w/ a comfortable, dual density grip and lined w/ precision bronze bearings to ensure a long, smooth running life. SKU
Model No.
MSRP
159292 ND-1
$21.95
Park SBC-1 Spoke Gauge & Ruler
Use to measure spokes in inches and centimeters, plus ball bearing sizes and cotter pins. Anodized aluminum with embossed markings. SKU
Model No
MSRP
109941 SBC-1
$7.95
Park SW Four Sided Spoke Wrenches
Unique four-sided design provides extra strength and support and helps prevent slipping and deformation of aluminum nipples. Uses the same world famous design and high quality materials as our threesided spoke wrenches. The SW-40 is the same 3.23mm (0.127") size as the SW-0 (black). The SW-42 is the same 3.45mm (0.136") size as the SW-2 (red). SKU
Model No.
134520 SW-40C 134522 SW-42C
800-283-2453
Color
MSRP
Black Red
$7.95 $7.95
134520 SW Four Sided Spoke Wrenches
637
Tools
Tools - Spoke Tools
Park SW Spoke Wrenches
Professional quality, precision-sized spoke wrenches are hardened and chrome plated for long service.
109942 SW Spoke Wrenches
151532 SW-12C Mavic Spoke Wrench
SKU
Model no
Size
Spec's
MSRP
109942 109943 109944 109945
SW-OC SW-1C SW-2C SW-3C
.127" .13" .136" .156"
80 gauge/black 80 gauge/green 80 gauge/red 105 gauge/blue
$7.49 $7.49 $7.49 $9.29
Park SW-12C Mavic Spoke Wrench
Comfortable, vinyl dipped, double-ended spoke wrench for select Mavic wheels using the integrated M7 nipples. Smaller end fits 7-spline nipples w/ a 6.4mm outside spline diameter. These are found on the R-sys wheels. The larger end fits the 6-splines of the 9mm OD of the threaded eyelets of the "FORE drilled rim adapters" found on rims such as the Mavic XM819, EX823 and Speedcity wheels. SKU
Model No.
151532 SW-13C
MSRP
$12.29
Park SW-13C Mavic Spoke Wrench
Comfortable, vinyl dipped, two-sided spoke wrench is designed to easily access Mavic fittings. Fits both Mavic 9mm threaded eyelets and 7mm integrated nipples. SKU
Model No.
134525 SW-13C
134525 SW-13C Mavic Spoke Wrench
134526 SW-14C Shimano Spoke Wrench
MSRP
$12.29
Park SW-14.5 Shimano Spoke Wrench
The two-sided SW-14.5 features 4.3mm and 3.5mm openings to fit Shimano Wheel System nipples. SKU
Model No.
159298 SW-14.5
MSRP
$11.95
Park SW-14C Shimano Spoke Wrench
The two-sided SW-14 features 4.3mm and 4.4mm openings to fit Shimano Wheel System nipples. SKU
Model No.
134526 SW-14C
MSRP
$12.29
Park SW-15C Three-Way Internal Nipple Wrench 140357 SW-15C Three-Way Internal Nipple Wrench
Combines innovative 3-way Y wrench w/ w/ a square socket and 5mm and 5.5mm hex sockets to fit internal spoke nipples. SKU
Model No.
140357 SW-15C
MSRP
$14.49
Park SW-5C Spoke Wrench Works on DT Torx style splined nipples. SKU
Model No.
151530 SW-5C
MSRP
$7.49
Park SW-7C Multi Spoke Wrench Fits the three most popular nipple sizes. 151530 SW-5C Spoke Wrench
638
102420 SW-7C Multi Spoke Wrench
SKU
Model No
102420 SW-7
MSRP
$9.49 SEATTLEBIKESUPPLY.COM
Tools - Tire & Tube Tools
Tools
Park TM-1 Spoke Tension Meter
The TM-1 Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. SKU
Model No.
MSRP
128972 TM-1
$74.95
Park WAG-4 Wheel Alignment Gauge
128972 TM-1 Spoke Tension Meter
Screw-operated indicator will not move when set. Works on front and rear wheels, from 16" to 29", w/ or w/o the tire on. SKU
Model No.
MSRP
128109 WAG-4
$54.95
XLC O Type Spoke Wrench
Heavy duty round wrench includes all popular gauges. SKU
MSRP
143536
$7.00
128109 WAG-4 Wheel Alignment Gauge
XLC Pro Spoke Wrench Set of 3 Red/Black/Green vinyl coated handles. .127", .130" and .136". SKU
Size
156707 .127", .130", .136"
Color
MSRP
Red / Black / Green
$20.00
Tools - Tire & Tube Tools 143536 O Type Spoke Wrench
Crank Brothers Speedier Lever Tire Polycarbonate tire lever. SKU
Size
156224 144mm 159819 Bulk Pack of 24 159818 Display box w/ 24 Levers
Spec's
MSRP
26g
$7.00
Kool Stop Sport Tire Levers
156224 Speedier Lever Tire
Three piece set in a compact carrying case. SKU
MSRP
109876
$3.75
Kool Stop Tire Bead Jack Lever
The Kool Stop Tire Bead Jack is an articulated tool, w/ a comfortable grip, for installing really tight tires. The articulated end uses the rigid piece against the rim edge as a fulcrum while the hinged end lifts the bead up and over the opposite edge of the rim. This is a great tool for dealing w/ difficult tires. SKU
Color
MSRP
159653 Black 109876 Sport Tire Levers 800-283-2453
639
Tools
Tools - Tire & Tube Tools
Park Shop Inflator INF-1 154128 Shop Inflator INF-1
Specially built for bicycles, the INF-1 utilizes a dual Presta and Schrader head that rotates making valve access quick and easy. The INF-1 features an ergonomic dual density grip, built in pressure gauge (0-160 psi, 0-11 bars), and accepts any 1â „4" NPT (National Pipe Thread) male threaded fitting. Built for everyday shop use and rebuildable! SKU
MSRP
154128
$140.95
Park TB-2C Emergency Tire Boot 134519 TB-2C Emergency Tire Boot
The fastest, easiest, and most secure way to repair a cut or worn tire sidewall. TB-2 is produced using a strong, waterproof vinyl membrane w/ fiber weave reinforcement. A super strong pressure sensitive adhesive assures the boot stays in place in any tire, road or mountain, high or low pressure. SKU
Model No.
MSRP
134519 TB-2C
$3.49
Park TL-1 Tire Lever Set
made of glass-injected nylon to ensure long life and damage-free operation. 119862 TL-1 Tire Lever Set
SKU
Model no
138276 TL-1 119862 TL-1C
Qty
MSRP
25 Sets of 3/Box Each
$2.95
Park TL-4C Tire Tool Set
Strong enough to remove the toughest tires yet just the right size to stash. SKU
140358 TL-4C Tire Tool Set
Model No.
MSRP
140358 TL-4C
$2.95
Park TL-5 Heavy Duty Steel Tire Lever Set
The TL-5 Heavy Duty Tire Lever Set is designed for use on the toughest tire and rim combinations. Made of forged steel, these beefy levers are a full 8" (20.3cm) long for superior leverage. Set of two. SKU
Model No.
MSRP
128973 TL-5
$25.95
128973 TL-5 Heavy Duty Steel Tire Lever Set
Park TL-6C Steel Core Tire Lever Set
Composite covered steel core lever set. Provides smooth, scratch free operation and superior strength. 5.5"/ 14cm in length. Sold in pairs. SKU
Model No.
MSRP
151537 TL-6C
$16.95
151537 TL-6C Steel Core Tire Lever Set
Park VC-1 Valve Core Tool
Designed to remove SV and PV Cores and to install PV Extenders w/ 5mm wrench flats. SKU
Model No.
151539 VC-1
MSRP
$10.95
151539 VC-1 Valve Core Tool
640
SEATTLEBIKESUPPLY.COM
Tools - Tire & Tube Tools
Tools
Pedro’s Tire Lever Display Pack Display box contains 24 two-piece tire lever sets. SKU
Spec's
137457 24 Pair 131840 24 Pair
Color
MSRP
Assorted Yellow
$120.00 $120.00 137457 Tire Lever Display Pack
Pedro’s Tire Levers
Refined composite formula resists breakage & bending. Ergonomic shape is easier to handle than standard levers. Snap together for easy storage. SKU
Spec's
126862 Pair
Color
MSRP
Yellow
$5.00
Color
MSRP
Planet Bike Pencil Gauge SKU
Spec's
134971 10/Pkg
126862 Tire Levers
134971 Pencil Gauge
Red/Black Anodized
Quik-Stik Tire Lever Designed for non-high pressure tires. SKU
Spec's
111449 1/Card 134995 36/Jar
Color
MSRP
Yellow Assorted
134995 Tire Lever
SKS Digital Pressure Gauge
Dual swiveling head. backlit, oversized for an easy read. Reads in bar or psi. Reduction button allows pressure to be released one psi, or 1/10 a bar at a time. SKU
MSRP
142815
$24.99
142815 Digital Pressure Gauge
Slime 4-Way Tire Valve Tool Multi-functional tire tool SKU
MSRP
128624
128624 4-Way Tire Valve Tool 800-283-2453
641
Tools
Tools - Tire & Tube Tools
Topeak SmartGauge D2 Digital Pressure Gauge
The SmartGauge D2 features the proven quality of Topeak's Smart-Head that automatically adjusts to fit Presta or Schrader vales. The D2 has added the ability to rotate the valve 180° to fit into tight wheels or shocks. Reads up to 250psi (17 bar) and now features a pressure release button. 145350 SmartGauge D2 Digital Pressure Gauge
SKU
MSRP
145350
$34.95
XLC Dial Tire Gauge 160 PSI gauge. 154147 Dial Tire Gauge
SKU
MSRP
154147
$18.00
XLC Nylon Tire Levers
Constructed of a blend of PC and ABS for extreme durability and toughness. 143838 Nylon Tire Levers
154149 Pencil Tire Gauge
SKU
Qty
143838 3/Pack 157115 Box of 100
Color
MSRP
Black Black
$7.00
XLC Pencil Tire Gauge SKU
Color
MSRP
154149 Silver
$7.00
XLC Steel Core Tire Levers 157118 Steel Core Tire Levers
Unbreakable steel core, nylon coated tire levers w/chamfered tips and spoke holders. SKU
Qty
157118 3/Card 157116 Box of 50
Color
MSRP
Black Black
$13.00
XLC Steel Tire Lever 2 Pack SKU
154136 Steel Tire Lever 2 Pack
Color
154136 Silver
MSRP
$23.00
Tools - Tool Kits
Park AK-38 Advanced Tool Kit
• 37 tools in all • Includes: AWS-1, AWS-3, BBT-5, BBT-9, BBT-22, CC-3, CWP-6, CCW-5, CBW-1, CBW-4, CL-1, CM-5, CN-10, CNW-2, CT-3, FR-5, GP-2, GSC-1, PPL-1, PW-3, SCW-13 , SCW-14, SCW-15, SCW-16, SCW-17, SCW-18, SCW-19, SD-0, SD-2, SD-6, SR-1 SW-0, SW-1, SW-2, TB-2, TL-1. SKU
Model No.
157293 AK-38
MSRP
$319.95
157293 AK-38 Advanced Tool Kit
642
SEATTLEBIKESUPPLY.COM
Tools - Tool Kits
Tools
Park BTR-1 Essential Tool Roll Kit • Nylon tool roll w/ cinch strap • PMP-3 Pocket Protector Micro Pump • IB-1 I-Beam Fold-up tool set • GP-2 Pre-Glued Patch Kit • TL-4 Tire Lever Set • TB-2 Emergency Tire Boot • High pressure inflation gauge SKU
Model No.
142543 BTR-1
142543 BTR-1 Essential Tool Roll Kit
MSRP
$59.49
Park EK-1 Professional Travel and Event Kit
AWS-1, AWS-3, AWS-10, BBT-5/FR-11,BBT-22,BBT-9,BO-2,CC-23,CCW-5,CNW-2,CN-10,CWP-7,CT4.2,FR-5,GSC-1,HCW-15,HT-8,HT-10,HMR-2,MLP-1,MW-8,MW-9,MW-10,PAW-12,PW-4,RR-12,SCWSET,SD-0,SD-2,SD-3,SD-6,SD-6,SR-1,SW-0,SW-1,SW-2,TL-4,TWS-2,UK-1. Box measures 19"x15"x7" SKU
Model No.
145091 EK-1
MSRP
$689.95
145091 EK-1 Professional Travel and Event Kit
Park MK-222 Master Tool Kit*
Designed for the professional full service mechanic, the MK-222 is a complete set of professional level tools, fixtures, lubricants, gauges, and accessories The perfect way to start a repair business, open or expand a bike shop, or create the ultimate home workshop (Replaces the MK-218 as of January 2013). * Drop ship only SKU
Notes
155816 Drop Ship Only!
MSRP
$6995.95
Park PK-65 Professional Tool Kit
Designed for the serious home mechanic or as a solid starter kit for the professional, the PK-65 is a collection of Park's finest shop tools. While it includes the tools needed to perform almost any basic repair or adjustment, the PK-65 also includes the specialty tools to perform many advanced repair tasks, such as installing and removing headset races, crown races, cutting fork steerer tubes, straightening derailleur hangers, tapping threaded frame braze-ons, dishing wheels, and more. SKU
Spec's
157294 65 piece kit w/case
155816 MK-222 Master Tool Kit
MSRP
$989.95
Park SBS-1 Socket and Bit Set
157294 PK-65 Professional Tool Kit
The SBS-1 is a shop quality set of sockets, hex bits and Torx style bits for the bike mechanic. Ideal for use w/ Park Tool Torque Wrenches, the SBS-1's 3/8" drive bits and sockets are made from tough, chrome vanadium steel for long life. Includes: 3, 4, 5, 6, 8, 10mm hex bits, T25, T30 and T40 Torx style bits. 8, 9, 10, 11, 12, 13, 14, 15mm and 1" sockets (The 1" socket fits various Park Tool freewheel, cassette lockring, and bottom bracket tools. SKU
Model No.
142520 SBS-1
MSRP
$39.49
142520 SBS-1 Socket and Bit Set
Park SK-1 Home Mechanic Starter Tool Kit
Great way top start a tool collection. Kit includes; AWS-1, CCW-5, CM-5, GSC-1, PW-5, SD-2, SD-3, SW-7, TLi1 and VP-1. Comes in a nice size tool box with plenty of room for more tools. SKU
Model No.
140350 SK-1
800-283-2453
MSRP
$108.95
140350 SK-1 Home Mechanic Starter Tool Kit
643
Tools
Tools - Tool Kits
Park WTK-1C Essential Tool Kit 130943 WTK-1C Essential Tool Kit
WTK-1C contains tools needed for basic adjustments and repairs. Includes 3, 4, 5, 6mm hex wrenches; tire levers; patch kit; straight blade screwdriver; and small adjustable wrench, in a small tool wallet. Packaged carded. SKU
Model No.
MSRP
130943 WTK-1C
$25.95
XLC 33-Piece Tool Kit
T25, T30; 5mm & 7mm Flat driver; 2 Phillips screwdrivers. Socket wrench coupling. 8/9/10mm sockets w/ L-grip. 3 nylon tire levers / 1 tire repair kit. Crank puller. Chain tool. Hex wrench set w/ ball driver 2/2.2/3/4/5/6/8/10 mm. 15mm Pedal wrench w/ 24mm inset wrench. Hollow Tech II Crank arm tightner. Double ended Wrenches: 13/14, 15/16, 30/32 and 36/4mm. Chain Whip. 8/10mm box wrench. Lockring remover w/ pin. O-spoke wrench. Isis compatible 22 tooth bb cup remover. Outboard BB cup wrench. SKU
Color
MSRP
143156 Black Box
$120.00
143156 33-Piece Tool Kit
XLC Roll-Up Tool Kit
Economical starter or take along tool kit. Includes; universal spoke wrench, chain tool, tire levers, glueless patch kit, folding tool 2-8mm hex wrenches, 8,9 and 10mm box wrench socket attachments; 13/14mm concave wrench and 15/16mm cone wrench in a Roll-Up pouch. SKU
MSRP
156703
$34.00
Tools - Wrenches 156703 Roll-Up Tool Kit
Park CBW Wrench Series
Open end wrench. This small, nickel-plated wrench can be used on brakes, derailleurs, etc. Hole in wrench allows easy hanging on peg board. SKU
Model No.
109889 CBW-1C 109890 CBW-4C
Size
MSRP
8/10mm Open 9/11mm Open
$5.95 $5.95
109889 CBW Wrench Series
Park HCW-15 Head Wrench
Laser cut to ensure a tight, accurate fit. Size 32/36mm wrench. SKU
Model No
122693 HCW-15
MSRP
$16.95
122693 HCW-15 Head Wrench
Park HCW-7 Head Wrench
Laser cut to ensure a tight, accurate fit. Size 30/32mm. SKU
Model No
109919 HCW-7
MSRP
$18.95
109919 HCW-7 Head Wrench
644
SEATTLEBIKESUPPLY.COM
Tools - Wrenches
Tools
Park HCW-9 Head Wrench
Laser cut to ensure a tight, accurate fit. Size 36/40mm. SKU
Model No
116994 HCW-9
MSRP
116994 HCW-9 Head Wrench
$16.95
Park MQ-1 Metric Quad Wrench
The MQ-1 is a four-way socket wrench w/ 10.25" handles for leverage. Features forged 15, 17 & 19mm sockets and a 3/8" socket. Great for axle nuts, installing axle pegs and for use w/ bottom bracket tools... plus many other uses. SKU
Model No.
159291 MQ-1
MSRP
$19.95
151548 MW-Set.2 Metric Wrench Set
Park MW-Set.2 Metric Wrench Set
Includes 6mm to 17mm 12 point box/open end wrenches. Forged from chrome vanadium steel, meticulously polished then center dipped in Park Tool blue for a positive grip. SKU
Model No.
151548 MW-Set.2
MSRP
$79.95
Park PAW-12 Adjustable Wrench 12"
The PAW-12 is forged from chrome vanadium steel, precision ground and machined, then heat-treated and nickel-plated. It opens to 38mm and has a laser engraved measuring scale. Dipped in Park Tool Blue vinyl. SKU
Model No.
147282 PAW-12
147282 PAW-12 Adjustable Wrench 12”
MSRP
$33.95
Park ST-3C Three Way “Y” Socket Wrench 8mm, 9mm and 10mm on a “Y” wrench. SKU
Model No.
140353 ST-3C
MSRP
$14.95 140353 ST-3C Three Way “Y” Socket Wrench
Pedro’s Trixie
Specifically designed for the fixed gear rider, the Pedro’s Trixie is the urban survival tool w/ all the right pieces to keep that fixie rolling. Hardened tool steel gives this tool a great feel and long lasting life. Features: 15mm box end wrench, lock ring hook, 8,9,10mm box end wrenches, 5mm hex, a bottle opener (of course). Includes galvanized wing nuts to mount to water bottle bosses. SKU
MSRP
142724
142724 Trixie
XLC 14/15/24mm Pedal and Multi Wrench Cromoly shaft. Black handle. SKU
Size
143500 14/15/24mm
MSRP
$22.00 143500 14/15/24mm Pedal and Multi Wrench
800-283-2453
645
Tools
Tools - Wrenches
XLC 6" Adjustable Steel Wrench
Made from Drop-Forged Steel. Opens to 21mm, w/mm markings on the jaw. SKU
MSRP
156708
$15.00
XLC Ratchet and Open End Wrench Chrome Vanadium. 143537 Ratchet and Open End Wrench
SKU
Size
143537 8mm 143539 13mm 143540 15mm
646
Color
MSRP
Chrome Chrome Chrome
$22.00 $27.00 $20.00
SEATTLEBIKESUPPLY.COM