SOLUTION
1
NE
W!
Control Trim 2C Series Lock Out Access Control With Deadbolt Projection Disable Access Control Projection of Deadbolt Disables Access Control
How does it work?
Access Control Integration
The top cylinder controls both the deadbolt and the use of the bottom trim. When the deadbolt is projected, the bottom cylinder and 12vDC will no longer release the lever. When the deadbolt is retracted, the user can enter by using a key or 12vDC on the lower trim.
Exterior Lever Trim Released By Access Control System
Deadbolt Forced Entry Protection Operation by Key Exterior or Turnpiece Interior
Code Compliant Single Motion Deadbolt & Latch Retraction On Interior
Complete Lockset or Retrofit Trim Field Modification of Mortise Lock Body Required on Retrofit Model
Emergency Key Override
Request-To-Exit Built In
For Exterior Lever By Use of Key
Switch on Interior Lever (When Complete Lockset Is Furnished)
(Separate Keyed Cylinder Below Lever)
Model Information EDD-F-G50-T21-630* EDD-F
Mortise Exit Device with Latch and Deadbolt, fire rated Includes 7100 series exit device (latch, deadbolt, touchbar)
G50
GG trim, Standard lever design with return, Slipclutch, Trim cylinder below lever, Construction passage mode feature On mounting plate, upper cylinder in EDD cylinder location
T21
12vDC solenoid, momentary release, REX in touchbar
630
Satin stainless steel finish *Handing (LHR or RHR) required when ordering
7100 Series Interior Exit Device
G50 Exterior Trim
Field Adjustable Store Room/Passage Function The 2C Series can function as a passage lock (unlocked exterior lever) during construction, and later converted to storeroom function (key or electric release required). This can be done by exchanging the cylinders after the space is turned over. (Trim will need to be removed from the door to change the cylinder) Users of the space may want to convert back to passage mode during certain period of the lock’s life on the door. Trim can be adjusted to return to passage mode. SECURITECH GROUP, INC.
54-60 46th St., Maspeth, NY 11378
Š 2014 Securitech Group, Inc.
800.622.LOCK
718.392.9000
fax 718.392.8944
www.securitech.com
Additional Models Mortise deadbolt exit device - Request-To-Exit Switch - Stainless Steel Touchbar Turnpiece to project deadbolt - Deadbolt Monitor Switch - PG30 Battery Operated Alarm
Exit Only Model Model Number Breakdown
EDD-F-XXTP-X2M-APG30-630 Handing Required
Control Trim Model Model Number Breakdown
EDD-F XXTP X2M
Mortise deadbolt exit device, fire rated Exit only, no exterior trim, interior turnpiece to project the deadbolt Request-to-exit switch in touchbar (REX)
APG30
Deadbolt monitoring switch in lockbody (DMS) PG30 alarm, mounted on turnpiece plate, DMS input connector
Satin stainless steel finish
EDD-F G50TP
Mortise deadbolt exit device with Latch and Deadbolt, fire-rated
T21
12vDC solenoid, momentary release, REX in touchbar
X2M APG30
REX in touchbar, Deadbolt monitoring switch in lockbody (DMS) PG30 alarm, mounted on turnpiece plate, DMS input connector
630
Satin stainless steel finish
EDD-F-G50TP-T21-X2M-APG30-630 Handing Required
Exit Only Model, Surface Housing with Alarm & Keypad Shunt
GG trim, Standard lever design with return, Slipclutch, Trim below lever, Construction passage mode feature on mounting plate, upper cylinder in EDD cylinder locations; Interior turnpiece to project deadbolt.
All the elements of the EDD-F-XXTP-X2M-APG30-630 model, with a stainless steel surface housing for use on non-mortise doors Model Number
EDD-F-XXTP-X2M-APG30-SH-630
Exit Only Model - No Alarm
Elements • Mortise deadbolt exit device
• Request-to-exit switch
• Stainless steel touchbar
• Deadbolt Monitor Switch
• Turnpiece to project deadbolt Model Number
EDD-F-XXTP-X2M--630
PG21 Option
Substitute APG21 for APG30 in the model number Mortise cylinder operation in place of keypad (cylinder by others)
SECURITECH GROUP, INC.
54-60 46th St., Maspeth, NY 11378
800.622.LOCK
718.392.9000
fax 718.392.8944
www.securitech.com