Mechanical Solutions Complete suspension systems for pipework and mechanical installations
- Quick & easy to install - ‘Out of the box’ solutions - Versatile and labour saving
Low Profile Bracket Page 7
QT End Fixing Page 15
Armaflex Page 9
Pipe Bracket Page 5
QT Compact Clamp Page 6
QT Universal Clamp Page 4
Universal Clamp
Kooltherm
®
Page 9
Page 8
The Gripple range of supports and hangers for pipework applications has been developed to provide a fast and versatile solution for suspending all types of pipework and mechanical installations. Gripple products are designed to save time, labour and reduce costs by making the installation quicker and easier. Supplied in ready-to-use kits, the products in this range require no on-site cutting and eliminate the need for fabricating pipe bracket assemblies, offering enormous health and safety benefits for your project.
Scan to explore the mechanical application online
Gripple pipe kits provide complete ‘out of the box’ solutions for pipework and mechanical installations Products shown are for internal use only. Images shown for illustrative purposes only. Please refer to product installation instructions for full information.
QT Universal Clamp
Pipe Bracket (PB)
The Quick Twist Universal Clamp is designed for use with Gripple Pipe Brackets to provide quick and easy pipework installation.
Gripple Pipe Brackets are supplied with Quick Twist Universal Clamps for quick and easy pipework installation.
• • • • • •
• Quick and easy installation - Pipe Brackets are supplied with Quick Twist Universal Clamps featuring quarter turn attachment
Quick – integral mounting pillar and quarter turn attachment to pipe bracket Simple – no tools required for installation Universal – replaces more than 11 different pipe rings Versatile – 50 mm clearance between pipe and bracket to allow for insulation around the clamp Safe – 45 kg SWL with a 5:1 safety factor (equivalent to 3 in (OD 89) steel pipe filled with water) Supplied in ready-to-use kits with Gripple Pipe Brackets
• Saves labour time - eliminates the need for cutting channel on site, allowing more productive use of labour • Versatile - can be bolted directly to soffit or wall, or suspended from the soffit using threaded rod or Gripple Hanger e.g. Trapeze No. 2 • Compatible - integrates with Trapeze, Trapeze Plus and Y-Fit Hangers • Improves health and safety - no tools or “Hot Works” permit required for installation
Simplifying pipe installation
“Much better than traditional rod and rail... Saved us four hours per floor” Darren Coy, Site Supervisor, Vista Apartments - Peterborough
Product Codes - Page 17
Technical Data - Pages 18 to 19
Installation System Design Service
Sales Enquiries
Standard product codes for ordering Pipe Bracket Kits, Low Profile Bracket Kits and Wire Rope Hangers
Product specifications and load rating information to suit your project requirements
Submit your drawings and our technical team will provide bespoke product specification based on your project requirements
Call our friendly team on
4
www.gripple.com
www.gripple.com
0800 018 4264 5
QT Compact Clamp
Low Profile Bracket (LPB)
A reduced height version of the Quick Twist Universal Clamp, for applications where space is restricted or mounting close to the soffit or wall is required.
Specially developed to complement Quick Twist Compact Clamps where pipework has to be mounted close to the soffit or wall.
• • • • • •
• • • •
Quick – quarter turn attachment to pipe bracket Simple – no tools required for installation Universal – replaces more than 11 different pipe rings Versatile – pipes can be mounted less than 35 mm from the soffit or wall Safe – 45 kg SWL with a 5:1 safety factor (equivalent to 3 in (OD 89) steel pipe filled with water) Supplied in ready to use kits with Low Profile Brackets
The latest innovation from Gripple
Quick and easy installation - Low Profile Brackets are supplied with Quick Twist Compact Clamps featuring quarter turn attachment Saves labour time - eliminates the need for cutting channel on site, allowing more productive use of labour Versatile – designed to be bolted directly to soffit or wall. Can also be used as a header rail for suspending other MEP services using the Quick Twist End Fixing (Page 15) Improves health and safety - no tools or “Hot Works” permit required for installation
“I highly recommend Gripple pipe solutions it’s cleaner, faster and lighter” Michael Hanslip, Mechanical Supervisor, Kershaws - Flitwick Leisure Centre
Product Codes - Page 17
Technical Data - Pages 18 to 19
Installation System Design Service
Sales Enquiries
Standard product codes for ordering Pipe Bracket Kits, Low Profile Bracket Kits and Wire Rope Hangers
Product specifications and load rating information to suit your project requirements
Submit your drawings and our technical team will provide bespoke product specification based on your project requirements
Call our friendly team on
6
www.gripple.com
www.gripple.com
0800 018 4264 7
Universal Clamp (GUC)
Kooltherm / Armaflex
The Universal Clamp is engineered for hanging all types of pipework within mechanical and plumbing services.
To complement Gripple Pipe Clamps, Kooltherm® and Armaflex pipe collars provide rapid installation and ensure insulation continuity without thermal breaks.
• • • • • • •
• Space saving – advantageous for applications in confined spaces or areas where space is at a premium • Universal – suitable for mild steel, stainless steel, copper and plastic pipes in a range of sizes • High performance – reduced heat loss and highly moisture resistant • Thermal efficiency: - Kooltherm -50°C to +120°C - Armaflex -183°C to +105°C • Thermal conductivity as low as: - Kooltherm 0.021 W/m·K at 10°C - Armaflex 0.036 W/m·K at 10°C
®
Universal - for pipe sizes 15 mm Copper (OD15) to 3 in Steel (OD89) pipework Replaces more than 11 different pipe ring sizes Retractable, removable sleeve is pre-fitted to wire rope to prevent galvanic corrosion Improved insulation against vibration Easy site storage, reduces waste Simplifies ‘take-off’ process Available up to 45 kg SWL, with a 5:1 safety factor
Armaflex
Kooltherm
“Gripple’s pipe solutions are faster to install than traditional methods, saving time and money”
“Modular, fast and effective - can be installed with wire or rod” “Gripple’s pipe solutions are really quick and easy to use”
Site Supervisor, The Forum - Southend
Ian Kennedy - Hillsborough College, Sheffield
Product Codes - Page 17
Technical Data - Pages 18 to 19
Installation System Design Service
Sales Enquiries
Standard product codes for ordering Pipe Bracket Kits, Low Profile Bracket Kits and Wire Rope Hangers
Product specifications and load rating information to suit your project requirements
Submit your drawings and our technical team will provide bespoke product specification based on your project requirements
Call our friendly team on
8
www.gripple.com
www.gripple.com
0800 018 4264 9
Trapeze (TZ)
Trapeze Plus (MTZ)
Purpose–made hanger that can be used with either channel or Gripple Pipe Brackets for fast suspension of pipework and other building services.
The new, all steel Trapeze Plus is packed with new features to make the suspension of pipework and other building services even more secure and durable.
• Simple - adjustment pin for rapid height setting • Versatile - provides quick and easy installation of multi-tiered installations • Improves health and safety - can be pre-fitted to channel or Gripple Pipe Brackets to reduce time working at height • Safe – available in three sizes, with working load limit up to 225 kg, with a 5:1 safety factor
• • • •
Coming Soon – a new Quick Twist foot for the Trapeze Plus for even faster installation
All hangers are supplied as ready-to-use kits with a length of wire rope and end fixing of your choice.
10
Simple – easy-to-use integral adjustment button Secure – lock screw for ultimate security Versatile – can be used with channel or Gripple Pipe Brackets Safe – available in three sizes, with working load limit up to 225 kg with a 3:1 safety factor
All hangers are supplied as ready-to-use kits with a length of wire rope and end fixing of your choice.
“Gripple kits not only complement the architecture of a building but are also installed quickly and efficiently”
“Less material on site and fewer deliveries reduces the CO2 and helps the BREEAM rating”
Terry Whitaker, Contracts Engineer - Weavers Triangle
Steve Palmer, Project Engineer, Kershaws - Flitwick Leisure Centre
End Fixings - Page 16
Product Codes - Page 17
Installation System Design Service
Sales Enquiries
A wide selection of End Fixing options to suit your application requirements
Standard product codes for ordering Pipe Bracket Kits, Low Profile Bracket Kits and Wire Rope Hangers
Submit your drawings and our technical team will provide bespoke product specification based on your project requirements
Call our friendly team on
www.gripple.com
www.gripple.com
0800 018 4264 11
Standard Hanger (HF)
Express (XP)
The Standard Hanger presents an ideal solution to fulfil a variety of pipework and mechanical suspension requirements.
The Express No. 2 offers an instant locking system to make adjustment even easier.
• • • • • •
• • • • •
Up to 6 times faster to install than traditional suspension systems Versatile Simple to use Adjustable using key (provided with kits) Strong, safe and industry approved Load ratings up to 325 kg with a 5:1 safety factor
All hangers are supplied as ready-to-use kits with a length of wire rope and end fixing of your choice.
12
The system incorporates an integral adjustment mechanism for convenience Up to 6 times faster to install than traditional methods Keyless operation Discreet and aesthetic design Express No. 2 load rated at 45 kg with a 5:1 safety factor
All hangers are supplied as ready-to-use kits with a length of wire rope and end fixing of your choice.
“The Gripple system is excellent in terms of cleanliness, time saving and safety”
“Gripple kits helped us to complete the job on time, whilst also reducing our embodied carbon”
Paul Carey - Site Manager - Kershaw, Woodpecker Hall Primary School
Jamie - Site Supervisor, Gateway Primary Free School
End Fixings - Page 16
Product Codes - Page 17
Installation System Design Service
Sales Enquiries
A wide selection of End Fixing options to suit your application requirements
Standard product codes for ordering Pipe Bracket Kits, Low Profile Bracket Kits and Wire Rope Hangers
Submit your drawings and our technical team will provide bespoke product specification based on your project requirements
Call our friendly team on
www.gripple.com
www.gripple.com
0800 018 4264 13
Y-Fit and Y-Fit Accessory
QT End Fixing
Single hanger with dual suspension points, which improves stability and centre of gravity.
The Quick Twist End Fixing uses innovative twist technology together with a Low Profile Bracket for use as a header rail for all mechanical and electrical installations.
• Y-Fit is a one-piece suspension, ideal for shorter drop lengths • Y-Fit Accessory is designed for use with a Standard Hanger kit, for longer drops and increased adjustment
• Quick and easy installation – uses the patented Quick Twist End Fixing to attach Gripple wire suspension kits with just a quarter turn
• Ideal for balanced, two or three pipe runs e.g. bathroom run offs
• Saves labour time - pre-cut Low Profile Brackets eliminate the need for cutting channel on site, allowing more productive use of labour
• Available with a range of end fixings, and leg lengths to suit your specification
• Versatile Low Profile Brackets – designed to be bolted directly to the soffit as a header rail for suspending all MEP services using the Quick Twist End Fixing
• Minimises the number of suspension points, reduces installation costs
• Improves health and safety - no tools or “Hot Works” permit required for installation
Coming soon 2015
“Very easy to install” “Ideal for use with a Gripple Pipe Brackets” Ian Mallinder - Contractor, Tesco, Leeds
Wire Rope Hangers - Page 10 to 13
End Fixings - Page 16
Installation System Design Service
Sales Enquiries
Wire Rope Hangers, designed to complement Pipe Bracket Kits and Low Profile Pipe Bracket kits
A wide selection of End Fixing options to suit your application requirements
Submit your drawings and our technical team will provide bespoke product specification based on your project requirements
Call our friendly team on
14
www.gripple.com
www.gripple.com
0800 018 4264 15
End Fixings
Product Codes
All Gripple hanger kits are supplied with pre-crimped end fixings and your choice of wire rope length, suitable for installation into any substrate.
Standard product codes for Pipe Bracket and Low Profile Bracket kits:
Loop
Installation
• Ideal for looping around purlins, beams, roof trusses and other suitable building features • Available up to 325 kg SWL, with a 5:1 safety factor • Available in Stainless Steel
25 mm Wedge
Installation
• Ideal for fixing into the re-entrant channel of several composite floor deckings (R51, CF51, Holorib, MD50 and MF55) • Available up to 90 kg SWL, with a 3:1 safety factor • Comes as a ready-to-use kit with wire and Hanger
Snap Hook
Installation
• Quick and easy attachment to cable basket, purlin clips, light fittings • Available in Gripple sizes No.2 and No.3 up to 90 kg SWL, with a 5:1 safety factor • Available in Stainless Steel
Stud
Installation
LPB-KIT
2
Bracket with 2 x Clamps
PB230-2GC2-T-400
LPB350-2GC2-C-400
3
Bracket with 3 x Clamps
PB380-3GC2-T-400
LPB350-3GC2-C-400
4
Bracket with 4 x Clamps
PB640-4GC2-T-400
LPB650-4GC2-C-400
5
Bracket with 5 x Clamps
PB640-5GC2-T-400
LPB650-5GC2-C-400
1) Choose your kit type:
(Input the code in the red area below)
Standard Hanger No.1
Standard Hanger No.2
Express No.2
Trapeze No. 2
Trapeze No. 3
Trapeze Plus No. 2
Trapeze Plus No. 3
Trapeze Plus No. 4
HF1
HF2
XP2
TZ2
TZ3
MTZ2
MTZ3
MTZ4
Loop
25 mm Wedge
Snap Hook
Eyelet
Spider
Channel Nut
DW258G
SH6G
Stud M10 x 45 mm
Eyelet 90°
LG
EY690G
EY6G
STG
CN8G
2) Choose your end fixing:
Installation
(Input the code in the green area below)
3) Choose your wire length:
Installation
• A cast-in-place concrete insert solution for hanging mechanical & electrical services • Swivel Toggle provides fast attachment of Wire Hangers No.2 and No.3 up to 90 kg at 5:1 SWL • Also available in the following thread sizes: M8 & M10
Channel Nut
PB-KIT
Standard product codes for Gripple hangers:
• Ideal for fixing into concrete, steel or wood using gas or powder activated tools or appropriate screws • Available in Gripple sizes No.1, No.2 and No.3 up to 90 kg rated at 5:1 SWL
Spider
Description
Pipe Brackets and Low Profile Brackets are also available in 950 and 1,200 mm lengths. Contact our technical team for details.
• Ideal for anchoring into concrete ceilings and Channel Nuts • Supplied with a Drop-In Anchor • Available up to 225 kg SWL, with a 5:1 safety factor • Available in Stainless Steel
90° Eyelet
No. of pipes
(Input the code in the blue area below) Bespoke lengths are available upon request.
1M
S10G
2M
3M
5M
10M
4) Enter your unique product code:
-
Installation Section 1
• Designed for fixing directly into Channel • Available in Gripple sizes No.2 and No.3 • Comes as a ready-to-use kit with wire and Hanger
Section 2
Section 3
Other hangers, end fixings and wire lengths (in multiples of 1m) are available, please call 0800 0184 264 or visit our website www.gripple.com for further details.
Other End Fixings are available. Contact our technical team for details.
16
www.gripple.com
www.gripple.com
17
Clamp Technical Data
Bracket Technical Data
Recommended minimum support spacing for pipe brackets and equivalent load per clamp when brackets are spaced as recommended:
Recommended minimum support spacing for pipe brackets and equivalent load per clamp when brackets are spaced as recommended:
Copper tube
Tube size (NPS)
BS EN 1057 (Table X)
Steel pipe
BS EN 10255 (Medium) (formally BS 1387)
Actual outside diameter
Tube weight per meter
Water weight per meter
Total weight per meter Tube & Water
Tube support spacing for horizontal runs (ref. CDA / UK Copper Board)
Weight per clamp at recommended support spacing
mm
mm
kg/m
kg/m
kg/m
m
kg
12
12
0.191
0.092
0.28
1.0
0.28
15
15
0.281
0.145
0.43
1.2
0.51
22
22
0.533
0.321
0.85
1.8
1.54
28
28
0.684
0.539
1.22
1.8
2.20
35
35
1.134
0.835
1.97
2.4
4.73
42
42
1.369
1.232
2.60
2.4
6.24
54
54
1.772
2.091
3.86
2.7
10.43
66
66.7
2.198
3.248
5.45
3.0
16.34
76
76.1
3.129
4.197
7.33
3.0
21.98
Nominal bore (DN)
Specified outside diameter
Pipe weight per meter
Water weight per meter
Total weight per meter pipe & water
Pipe support spacing for horizontal runs (ref. Minikin)
Weight per clamp at recommended support spacing
mm
inches
mm
kg/m
kg/m
kg/m
m
kg
15
1/2
21.3
1.21
0.204
1.41
2.0
2.83
20
3/4
26.9
1.56
0.350
1.91
2.4
25
1
33.7
2.41
0.585
3.00
32
1 1/4
42.4
3.10
1.018
40
1 1/2
48.3
3.57
50
2
60.3
65
2 1/2
80
3
35 mm
Pipe Bracket Area
Weight
Ixx
Yield stress
2
cm
kg/m
cm
min Mpa
1.7
1.33
4.9
4
Max. Load (UDL)
mm
mm
UDL (kg)
Fmax (kg)
∑ Fmax (kg)
Pmax (kg)
PB230
230
197
PB380
380
347
PB640
640
405
PB1020
1020
405
PB1200
1200
405
90 135 225 315 360
45 45 45 45 45
90 90 90 90 90
45 45 45 45 45
Product
4.58
cm2
kg/m
cm4
min Mpa
2.7
8.09
1.47
1.17
1.65
250
4.12
2.7
11.12
1.379
4.95
3.0
14.85
5.03
2.214
7.24
3.4
24.63
76.1
6.43
3.728
10.16
3.7
37.59
88.9
8.37
5.140
13.51
2.7 (3.7)
36.48
• Material: Polyamide 66 (Nylon) • Smoke toxicity: conforms to CEI 754-1 and CEI 754-2
62 mm 14 mm
X 16 mm
16 mm
Length
Max. dist. between fixings
Max. Load (UDL)
mm
mm
UDL (kg)
Fmax (kg)
∑ Fmax (kg)
Pmax (kg)
LPB350
350
334
LPB650
650
317
LPB950
950
317
LPB1200
1 200
317
135 225 315 360
45 45 45 45
90 90 90 90
45 45 45 45
Product
Uniform Load UDL
• Material: EPDM • Hardness: 40 +/- 5 Shore A
F
L
www.gripple.com
Single Point Load F max
max
L
Max. Single Point Load
Max. Multi Point Load
Multi Point Load
� F max
www.gripple.com
X
78 mm
Rubber pad
18
Max. Single Point Load
Max. Multi Point Load
Low Profile Bracket Yield stress
• Material: Type ZA2 Zinc • Working temperature: -40°C to +110°C
2 mm
Max. dist. between fixings
Ixx
Retractable sleeve
X
Length
Weight
Housing
R1
X
250
Area
Clamp specification:
43 mm
P
max
L/2
L/2 L
19
www.gripple.com info@gripple.com
Gripple Ltd (Headquarters)
Gripple Inc
Gripple Europe SARL
Gripple India
The Old West Gun Works Savile Street East Sheffield S4 7UQ UK
1611 Emily Lane Aurora IL 60502 USA
1, rue du commerce BP 37 67211 Obernai Cedex France
B 95/2 Naraina Industrial Area Phase I New Delhi-110028
T | +44 (0) 800 018 4264 F | +44 (0) 114 275 1155 E | info@gripple.com
T | +1 866 474 7753 F | +1 800 654 0689 E | usinfo@gripple.com
T | +33 (0)3 88 95 44 95 F | +33 (0)3 88 95 08 78 E | frinfo@gripple.com
T | +91 11-40582703 F | +91 11-40582703 E | ininfo@gripple.com
WE ARE SOCIAL FOLLOW OUR UPDATES
Š 2015 Gripple Gripple is a registered trademark of Gripple Limited. BUS-BROC-MEP-GEN-ENG-MS15
Company registered in England No. 1772901, VAT Reg No. GB 600 1951 88