Pipe Support and Hanger Systems Complete solutions for suspending all types of pipework
Trapeze No.2 Page 7
Universal Clamp
Introduction
Page 4
The Gripple range of pipe supports and hangers have been developed to provide a complete solution for suspending all types of pipework. Gripple’s ready-to-use solution for pipework support includes the new and versatile range of Pipe Brackets, pre-fitted with Universal Clamps that can replace more than 11 different pipe sizes, and are compatible with high performance ‘Kooltherm®’ and ‘Armaflex’ insulation and Gripple hanger systems. These products have been designed to save you time, labour and money by making the installation much quicker and easier. The products in this range eliminate the need for preparing different types of product assemblies for installation, as they are delivered to site pre-fabricated. 2
www.gripple.com
End fixing choices Page 7
Y-Fit Hanger Page 7
Pipe Bracket Page 6
Armaflex Pipe Collar Page 5
Kooltherm速 Pipe Collar Page 5
www.gripple.com
3
Universal Clamp The Universal Clamp is engineered for hanging all types of pipework within mechanical and plumbing services. • Universal - for pipe sizes 15 mm Copper (OD15) to 3” Steel (OD89) pipework • Up to 6 times faster than traditional methods • Replaces more than 11 different pipe ring sizes • Retractable, removable sleeve is pre-fitted to wire rope to prevent galvanic corrosion • Improved insulation against vibration • No tools required for installation • Easy site storage, reduces waste • Simplifies ‘take-off’ process • Available up to 45 kg SWL, with a 5:1 safety factor • Lloyd’s certified
Installation
Specifications: Universal clamp • Working temperature: -40°C to +110°C • Dual connection thread: Ø M8 / M10
Retractable sleeve
Description
Références
Universal Clamp fully insulated. Wire length 400 mm. Safe working load 45 kg.
GC2-M-400MM
• Polyamide 66 (Nylon) • Retracts up to 8 times its normal length • Smoke toxicity conforms to CEI 754-1 and CEI 754-2 • Resists chemical solvents
Universal Clamp fully insulated. Wire length 600 mm for use on insulated pipework. Safe working load 45 kg.
GC2-M-600MM
Rubber pad
Non-insulated variations on request.
4
www.gripple.com
• Material: EPDM • Hardness: 60 to 68 Shore A
Kooltherm® and Armaflex Pipe Collars The Gripple pipe support system provides rapid installation, ensuring insulation continuity without thermal breaks. • Space saving – advantageous for applications in confined spaces or areas where space is at a premium • Universal – suitable for mild steel, stainless steel, copper and plastic pipes in a range of sizes (insulation specific, see below) • High performance – reduced heat loss and highly moisture resistant • Simple to install, one click locking mechanism • KoolTherm thermal efficiency range -50°C to +120°C and thermal conductivity as low as 0.021 W/m·K at 10°C • Armaflex thermal efficiency range -183°C to +105°C and thermal conductivity as low as 0.036 W/m·K at 10°C
Installation
Product
Pipe
BS EN 1057 Copper Pipes
KoolTherm BS 1387 Steel Pipes
BS EN 1057 Copper Pipes
Armaflex BS 1387 Steel Pipes
OD (mm)
Armaflex
Kooltherm
NPS (in)
Product Code
Description
Max. Bracket Spacing for horizontal runs (m)
15
1
⁄2
GC2-KT-15-XX
Insulated pipe support for 15 mm pipe
1.2
22
3
⁄4
GC2-KT-22-XX
Insulated pipe support for 22 mm pipe
1.8
28
1
GC2-KT-28-XX
Insulated pipe support for 28 mm pipe
1.8
35
1 1⁄4
GC2-KT-35-XX
Insulated pipe support for 35 mm pipe
2.4
42
1 1⁄2
GC2-KT-42-XX
Insulated pipe support for 42 mm pipe
2.4
54
2
GC2-KT-54-XX
Insulated pipe support for 54 mm pipe
2.7
67
2 1⁄2
GC2-KT-67-XX
Insulated pipe support for 67 mm pipe
3.0
76
3
GC2-KT-76-XX
Insulated pipe support for 76 mm pipe
3.0
21
1
⁄2
GC2-KT-21-XX
Insulated pipe support for 1⁄2” pipe
2.0
27
3
⁄4
GC2-KT-27-XX
Insulated pipe support for 3⁄4” pipe
2.4
34
1
GC2-KT-34-XX
Insulated pipe support for 1” pipe
2.7
42
1 1⁄4
GC2-KT-42-XX
Insulated pipe support for 1 1⁄4” pipe
2.7
48
1 1⁄2
GC2-KT-48-XX
Insulated pipe support for 1 1⁄2” pipe
3.0
60
2
GC2-KT-60-XX
Insulated pipe support for 2” pipe
3.4
76
2 1⁄2
GC2-KT-76-XX
Insulated pipe support for 2 1⁄2” pipe
3.7
89
3
GC2-KT-89-XX
Insulated pipe support for 3” pipe
3.2
15
1
⁄2
GC2-AF-15-XX
Insulated pipe support for 15 mm pipe
1.2
22
3
⁄4
GC2-AF-22-XX
Insulated pipe support for 22 mm pipe
1.8
28
1
GC2-AF-28-XX
Insulated pipe support for 28 mm pipe
1.8
35
1 1⁄4
GC2-AF-35-XX
Insulated pipe support for 35 mm pipe
2.4
42
1 1⁄2
GC2-AF-42-XX
Insulated pipe support for 42 mm pipe
2.4
54
2
GC2-AF-54-XX
Insulated pipe support for 54 mm pipe
2.7
67
2 1⁄2
GC2-AF-67-XX
Insulated pipe support for 67 mm pipe
3.0
76
3
GC2-AF-76-XX
Insulated pipe support for 76 mm pipe
3.0
21
1
⁄2
GC2-AF-21-XX
Insulated pipe support for 1⁄2” pipe
2.0
27
3
⁄4
GC2-AF-27-XX
Insulated pipe support for 3⁄4” pipe
2.4
34
1
GC2-AF-34-XX
Insulated pipe support for 1” pipe
2.7
42
1 1⁄4
GC2-AF-42-XX
Insulated pipe support for 1 1⁄4” pipe
2.7
48
1 1⁄2
GC2-AF-48-XX
Insulated pipe support for 1 1⁄2” pipe
3.0
60
2
GC2-AF-60-XX
Insulated pipe support for 2” pipe
3.4
76
2 1⁄2
GC2-AF-76-XX
Insulated pipe support for 2 1⁄2” pipe
3.7
89
3
GC2-AF-89-XX
Insulated pipe support for 3” pipe
3.2
XX refers to insulation thickness (in mm); For KoolTherm, insulation thickness options are 15, 20, 25, 30, 40 or 50 mm. For Armaflex, insulation thickness options are 19, 25 or 32 mm. Therefore a Universal Clamp with KoolTherm insulation for use on 42OD pipe with 25 mm insulation is GC2-KT-42-25.
www.gripple.com
5
Pipe Brackets Pipe Brackets are pre-fabricated with Universal Clamps and require no on-site cutting or assembly. PB380 with Universal Clamps
PB640 with Universal Clamps
• Quick and easy installation - Pipe Brackets come pre-assembled with Universal Clamps at pre-set centres and are ready-to-use • Versatile - Can be bolted directly to soffit or wall, or suspended at a length from the soffit • Saves labour time - Eliminates the need for cutting channel on site, allowing more productive use of labour • Universal - For pipe sizes 15 mm Copper (OD15) to 3” Steel (OD89) pipework • Compatible - Integrates with Trapeze No.2 and Y-Fit kits • Improves Health & Safety - No tools or “Hot Works” permit required for installation • No sharp edges and no end caps required
Mounting concepts
Bolted directly to soffit
Type
380 mm Pipe Bracket
640 mm Pipe Bracket
Suspended from the soffit using Trapeze No.2
Product Code
No. of Pipes
Orientation
Product description
PB380-2M8-150MM-GCI
2
-
150mm* spacing between Universal Clamps. Max. working load 90 kg
PB380-3M8-150MM-GCI
3
-
150mm spacing between Universal Clamps. Max. working load 90 kg
PB380-2/2M8-150MM-GCI
4
2 above, 2 below
150mm* spacing between Universal Clamps. Max. working load 90 kg
PB380-2/3M8-150MM-GCI
4
2 above, 3 below
150mm spacing between Universal Clamps. Max. working load 90 kg
PB380-3/3M8-150MM-GCI
4
3 above, 3 below
150mm spacing between Universal Clamps. Max. working load 90 kg
PB640-4M8-150MM-GCI
4
-
150mm* spacing between Universal Clamps. Max. working load 90 kg
PB640-5M8-150MM-GCI
5
-
150mm spacing between Universal Clamps. Max. working load 90 kg
PB640-4/2M8-150MM-GCI
4
4 above, 2 below
150mm* spacing between Universal Clamps. Max. working load 90 kg
PB640-4/3M8-150MM-GCI
4
4 above, 3 below
150mm* spacing between Universal Clamps. Max. working load 90 kg
PB640-4/4M8-150MM-GCI
4
4 above, 4 below
150mm* spacing between Universal Clamps. Max. working load 90 kg
PB640-4/5M8-150MM-GCI
4
4 above, 5 below
150mm spacing between Universal Clamps. Max. working load 90 kg
PB640-5/2M8-150MM-GCI
4
5 above, 2 below
150mm spacing between Universal Clamps. Max. working load 90 kg
PB640-5/3M8-150MM-GCI
4
5 above, 3 below
150mm spacing between Universal Clamps. Max. working load 90 kg
PB640-5/5M8-150MM-GCI
4
5 above, 5 below
150mm spacing between Universal Clamps. Max. working load 90 kg
* 200 mm spacing options also available. ** Longer, bespoke options using pre-cut strut are available on request.
6
Suspended from soffit and double stacked
www.gripple.com
Y-Fit Hanger Single point suspension for use when suspending balanced pipework. • Ideal for suspending tray and basket • Snap hook version is ideal for use with the Pipe Bracket • Also available in a range of end fixings, with a variety of leg lengths
Drop length
Product recommendation
<2m
Y-Fit Hanger
>2m
Y-Fit Accessory with a Standard Hanger
Max 60º
Trapeze No.2 and No.3 Purpose-made for single and multi-tiered installations. • Ideal for fast suspension of pipework brackets • Also ideal for cable containment, air conditioning casettes and chilled beams • Tapered design - accommodates all channel slot sizes • Discreet - fits completely inside the channel • Can be pre-fitted to Pipe Brackets to reduce working at height • Pin allows rapid adjustment • Aesthetic design • Trapeze No.2 load rated at 45 kg with a 5:1 safety factor • Trapeze No.3 load rated at 90 kg with a 5:1 safety factor • Available as an accessory for multi-tiered installations • Supplied as a ready-to-use kit • Available with a wide range of end fixings (see below) Product code
Product description
TZ2-LG-1M
1 m Trapeze No.2 kit with Loop end fixing
TZ2-S8G-1M
1 m Trapeze No.2 kit with M8 Stud end fixing
TZ3-LG-1M
1 m Trapeze No.3 kit with Loop end fixing
TZ3-S8G-1M
1 m Trapeze No.3 kit with M8 Stud end fixing
* Other lengths and end fixings available on request. Do not hesitate to contact our sales department.
Installation
Loop
M8 Stud
Toggle
M8 Barrel
Channel Nut
Clip information This clip pre-fits and holds the Trapeze onto the Pipe Bracket / channel. In preparation for working at height, simply clip onto the Trapeze unit.
www.gripple.com
7
www.gripple.com info@gripple.com
Gripple Ltd (Headquarters) The Old West Gun Works Savile Street East Sheffield S4 7UQ UK UK Sales : 0800 018 4264 Fax : +44 (0)114 275 1155 Email: info@gripple.com Gripple Europe SARL 1, rue du commerce BP 37 67211 Obernai Cedex France T | +33 (0)3 88 95 44 95 F | +33 (0)3 88 95 08 78 E | frinfo@gripple.com
Gripple Inc 1611 Emily Lane Aurora IL 60502 USA T | +1 866 474 7753 F | +1 800 654 0689 E | usinfo@gripple.com
Gripple Benelux Brusselstraat 51 2018 Antwerpen België T | +32 (0)3 244 18 38 F | +31 (0)70 362 18 44 E | nlinfo@gripple.com
Gripple Portugal Estrada Nacional 4 Km 46,5 Pontal 2985-201 Pegões Portugal T | +351 265 898 870 F | +351 265 898 879 E | ptinfo@gripple.com
Gripple GmbH Pariser Ring 1 76532 Baden-Baden Deutschland T | +49 (0)700 95 44 95 11 F | +49 (0)700 95 08 78 11 E | deinfo@gripple.com
Gripple s.r.l Via Ponte Pietra, 2 24123 Bergamo BG Italia T | +39 (0)35 300 246 F | +39 (0)35 424 0036 E | itinfo@gripple.com
Gripple Industrial Ibérica, S.L. Ctra. Logroño km 7, 3 Pol. Europa 1 50011 Zaragoza España T | +34 (0)97 678 32 67 F | +34 (0)97 678 32 68 E | esinfo@gripple.com
Gripple Australia / NZ Polyplas Pty Ltd, 30 Sydney Rd Bayswater, Victoria 3153 Australia T | +61 (0)3 9720 0449 F | +61 (0)3 9720 0469 E | auinfo@gripple.com
© 2013 Gripple Gripple is a registered trademark of Gripple Limited, Company registered in England No. 1772901, VAT Reg No. GB 600 1951 88
8
www.gripple.com
BROC-IND-PIPSOL-ENG