Opterna datasheets 1 by SENTOR ELECTRICAL

Opterna Opterna R

TurnOpt™ 1000 FDH OSP Solutions Introduction The Opterna® TurnOpt 1000 FDH is a compact Fiber Distribution Hub designed for low-density FTTx deployments. Supporting up to 72 subscribers, the TurnOpt 1000 FDH is housed in a small form-factor enclosure ideally suited for pole-mount installation, as well as wall-mount applications where space is limited. A pedestal version is also available. Housed within the TurnOpt 1000 FDH is Opterna’s exclusive Rotating Frame Assembly, providing 180° access to subscriber ports, the splitter module compartment, splitter lead storage and cable management. A variety of high performance splitter modules are available from Opterna for use in the TurnOpt 1000 FDH.

Features

Exclusive Rotating Frame Assembly

• Service distribution for 48 or 72 subscribers • 4 splitter module capacity • Storage for up to 32 splitter outputs • Optional MPO connectivity to Opterna FDT • Compact size: approx. 12” x 24” x 10” • NEMA 4-rated OSP enclosure • Approx. 28 lbs. • Pedestal version available

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSAH1rev1

1/4

Opterna Opterna R

TurnOpt™ 1000 FDH OSP Solutions Applications: • Rural Service • Small to mid-sized MDU’s • Distributed or midspan architectures • Fill gaps in service deployment 12 or 24 feeder fiber ports are available for connection to the Splitter Module inputs, or for direct connection to individual subscribers. The FDH can be ordered with splice trays or stubs for the Feeder fiber cable. MPO connectivity is also available on the distribution side for connection to Opterna Fiber Distribution Terminals. 12f ribbon stubs or splice trays are also supported; contact Opterna for details. The TurnOpt 1000 FDH features a NEMA 4-rated metal enclosure for indoor or OSP applications, with integral wall-mount flanges. An optional pole-mount conversion kit is available. Contact Opterna today for more information on the TurnOpt 1000 FDH and other Opterna FTTx products. FDH Specifications Connector Insertion Loss Connector Return Loss Splitter Module Capacity Splitter Lead Storage Capacity Maximum Number of Splice Trays Stub Cable Cable entry ports Door lock Enclosure Color Enclosure Material Weight (stubless) Enclosure Dimensions

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

0.3 dB maximum >65 dB 4 32 4 Indoor/Outdoor rated, G.657.A1 fiber 2 ports, 0.59” (15mm) max. dia. 216 style with latch and padlock hole Beige Aluminum 28 lbs. 24.5 x 12 x 10 inches 622 x 295 x 252 mm

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSAH1rev1

2/4

Opterna Opterna R

TurnOpt™ 1000 FDH OSP Solutions Pedestal Dimensions:

A 45”

B 30”

C 35”

D 14.5”

E 11.5”

TurnOpt Splitter Modules: • Available splitter modules include 1x32, 1x16, 1x8, 2x1x16, and 2x1x8 • Snap-in, finger release – no tools needed • Ships with output leads loaded into storage trays • Telcordia GR 1209 and 1221 Splitter Specifications Operating Wavelength Insertion Loss, Max. IL Uniformity, Max. Polarization Dependent Loss, Max. Return Loss, Min. Operating Temperature

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

1x8 10.40 dB 0.50 dB

1x16 1260 – 1650 nm 13.9 dB 1.4 dB 0.3 dB

1x32 17.2 dB 1.6 dB

55 dB -40 to 85 C

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSAH1rev1

3/4

Opterna Opterna R

TurnOptâ&#x201E;˘ 1000 FDH OSP Solutions Ordering Info: FDH Ordering Information Enclosure Type

Example: AH1W48-BTL00-SL20-SCA

Feeder Fiber Count

Feeder Fiber Connection

Feeder Fiber Stub Length

Output Fiber Connection

Distribution Fiber Stub Length

Adapter Type

AH1W48 pole/wall 48 ports

12f

TL Splice tray with pigtails

splice tray

MPO panel

SCA

SC/ APC

AH1W72 pole/wall 72 ports

24f

SL Stub, loose tube I/O cable

33 ft (10m)

Stub, loose tube I/O cable

33 ft (10m)

LCA

LC/ APC

AH1E48

pedestal 48 ports

66 ft (20m)

AH1E72

pedestal 72 ports

100 ft (31m)

Pole-mount kit: AH1W1-PMK Notes: 1) All stubs and pigtails contain G.657.A1 bend-insensitive fiber. 2) 12f Ribbon stubs available; contact Opterna for details. TurnOpt Splitter Module Ordering Information: Splitter count

Splitter type

Splitter grade

Termination

TSM1

Single

108

1x8

Standard

SCA

SC/APC

TSM2

Dual

116

1x16

Premium

LCA

LC/APC

132

1x32

Note: TSM2-132x-xxx is not a valid configuration. Splitter grade: Premium: Telcordia certified, extended warranty, r=5mm ultra bend insensitive fiber Standard: 3-year warranty

Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSAH1rev1

4/4

OSP Solutions

Outdoor Demarc Unit™ Introduction

Opterna’s DOpt unit is a unique outdoor enclosure that allows for the use of a variety of hardened simplex, duplex and multi-fiber connectors. DOpt can either be attached to a pole for aerial networks or placed inside pedestals for buried networks.

“Outdoor Demarc Unit”

Features

• Designed for cell tower applications • IP rated plastic enclosure • Integral tower • “Hardwire” or detachable cable entry option

Email: sales@opterna.com

Phone: +1 703 653 1130

Website: opterna.com

Opterna

OSP Solutions

Outdoor Demarc Unit™ Parameter

Specification

Enclosure

• Dimensions: 254 High x 163 Wide x 97 Deep mm • Material: UV Resistant Polycarbonate • Color: RAL 7016 Anthracite Grey • Suitable for:-45°C to +75°C.

Input Cable

• Number of fibers: 12 fiber • Input Adapter: Outdoor rated 12 fiber MTP • Input Connector: Outdoor rated 12 fiber MTP

Output Cable

• Six, two fiber cable with outdoor rated LC Duplex Connector

Mounting

• Stainless Steel Polemount Brackets • Built-in Wallmount feature with four mounting slots

Ingress Protecting

• Per IP66

Compliance

• Per GR771

Email: sales@opterna.com

Phone: +1 703 653 1130

Website: opterna.com

Opterna

Optical Distribution Box™

MTU, SFU Solutions

Introduction Opterna’s Optical Distribution Box (ODB) product line is a robust series of outdoor-rated enclosures designed for FTTx networks. The ODB features an internal swing-out panel design with an intergrated splice area that accommodates a PLC splitter, splicing and excess fiber storage. The swing-out panel also features a front face with a removable adapter plate holding SC duplex or LC quad adapters.*

“Optical Distibution Box”

Features

• Indoor and outdoor applications • IP 55 rated • Compact and light, made of UV resistant polycarbonate • Swing-out panel and removable adapter plate for easy installation and maintenance • Integrated holder for one PLC splitter • Integrated splice tray and fiber management • Distribution cables can be pre-terminated or spliced to pigtails • Lock with protective cap • Available in different sizes with up to 48 distribution ports

Email: sales@opterna.com

Phone: +1 703 653 1130

Website: opterna.com

Opterna

MTU, SFU Solutions

Optical Distribution Box™ Parameter Dimensions(HxWxD)

ODB 1A 8.9 x 6.3 x 3.2 inches

8.9 x 7.8 x 3.2 inches

Feeder cable port(s)

1 PG13.5 (5 to 9mm dia.)

2 PG16 (10 to 14mm dia.)

Distribution cable ports

8 (2 to 7mm dia.)

Number of adapters

2 SC duplex or LC quad

4 SC duplex or LC quad

Splice capacity

Splitter capacity

Water and dust resistance

IEC 60529 (IPX5, IP5X)

Impact resistance

IEC 60529 (IK08)

Operating temperature

-20 to +65°C

Enclosure material

Polycarbonate

Color

RAL 7016 (anthracite grey)

Dimensions

Email: sales@opterna.com

ODB 1B

11.4”w x 11.4”h x 5.7”d

Phone: +1 703 653 1130

Website: opterna.com

Opterna

MT Fanout Cable Assemblies™

Central Office Solutions

Introduction The Opterna MT hydra fanout assemblies are used to connect active equipment directly to high fiber count backbone MT cables and MT cassettes in data centers and other high density environments. Manufactured in our state- of-the-art facilities, they offer rapid deployment, high density and maximum space utilization combined with significant time and cost savings. The Opterna MT fanout cable assemblies are available in a wide range of multimode and single mode fiber types and connectors. The compact micro tube cables greatly reduce the total volume of cables and help to optimize the cable management.

“Data Center Connectivity MT Fanout Cables”

Features • Standard 12 and 24 fiber cable and MT connectors • Available in all fiber types - SM and MM

• 100 % factory terminated and tested - saves times and guarantees high performance • Standard LSZH outer sheath, PE and OFNP available on request • Standard Polarity A, all other types available on request • Optimized performance using highest quality connectivity components MTP Standard and MTP Elite connectors • 40 & 100G ready • 12 or 24 fibers in one compact MT connector • Standard 2.0mm fanout with SC and LC connectors, 0.9mm and other types of connectors available on request

Email: sales@opterna.com

Phone: +1 703 653 1130

Website: opterna.com

Opterna

Central Office Solutions

MT Fanout Cable Assemblies™

Introduction • Data center and telecommunication networks • High density connection between active equipment and distribution architectures • Gigabit Ethernet, Local Area Networks, Wide Area Networks, Storage Area Networks • Backbone links CATV and video telecommunication networks • High density FTTX applicationsv Parameter MT Connectors Fanout connectors Cable type Fiber types Cable diameter (mm) Cable weight (kg/ km) Bending radius Operating temperature °C Compliance

Connector type MTP Elite (MM) MTP (MM) LC/ SC (MM) MTP Elite (SM) MTP (SM) LC/ SC (SM)

Ordering Information ODCF

Specification Female 12 or 24F MTP® or MTP Elite® (MPO on request) SC or LC others available on request Micro fiber indoor cable with micro tube G652D, OM3, OM4 (Others on request) 12F - 3.5 24F - 4.6 12.5 14.6 20 x cable diameter (10 x cable diameter without load) 0 to +60 ISO/IEC 60793, ISO/IEC 60794, IEC 60332, TIA-604-5, IEC 61754-7, IEC 61754-4, IEC 61754-20, ISO/IEC 11801, EIA/TIA-5267 &14A, RoHS

Average IL (dB)* 0.10 0.20 0.20 0.10 0.25 0.15

Max IL (dB)* 0.35 0.60 0.30 0.35 0.75 0.30

Central Office Solutions

MT Fanout Cable Assemblies™ ODCF

ODCF

Fiber Type

Connector color

Polarity

MT Connector MT Type Connector Type

Fan-out connector Length Type excluding (APC /UPC/ PC) Fanout

Shortest branch length

MTP Elite

12F

SCA

SC/APC SX 010 1 Meter

0.1 OM3 Meter

OM3

Green A

MTP

24F

SCU

SC/UPC SX 015 1.5 Meter

0.5 OM4 Meter

OM4

Blue

SCP

SC MM SX

1.0 OS2 Meter

G652D

Beige

Other

LCA

LC/ APC SX

7A1

G657A1

LCU

LC/ UPC SX

7A2

G657A2

Aqua

LCP

LC MM SX

SDA

SC/APC DX

SDU

SC/UPC DX

SDP

SC MM DX

LDA

LC/ APC DX

LDU

LC/ UPC DX

LDP

LC MM DX

Return loss (dB) N/A N/A N/A >60 >60 >55(UPC)/60(APC)

150 15 Meter

*Per Mated Pair

Email: sales@opterna.com

Phone: +1 703 653 1130

Website: opterna.com

Opterna

Email: sales@opterna.com

Phone: +1 703 653 1130

Website: opterna.com

Opterna

Mt Array Trunk Cable Assemblies™

Central Office Solutions

Introduction The Opterna MT trunk cable assemblies are used for high density backbone cabling in data centers and other environments with high fiber density. Manufactured in our state-of-the-art facilities, they offer rapid deployment, high density and maximum space utilization combined with significant time and cost savings. The Opterna MT trunk cable assemblies are available in a wide range of multimode and single mode fiber types. The compact micro tube cables greatly reduce the total volume of cables and help to optimize the cable management.

Features

“Data Center Conectivity MT Array Trunk Cable Assemblies”

• Standard fiber counts of 12, 24, 48, 72 and 144 fibers, others available on request • Available in all fiber types - SM and MM • 100 % factory terminated and tested - saves times and guarantees high performance • Standard LSZH outer sheath, PE and OFNP available on request • Standard Polarity A, all other types available on request • Optimized performance using highest quality connectivity components MTP® Standard and MTP® Elite connectors • 40 & 100G ready • 12 or 24 fibers in one compact MT connector

Email: sales@opterna.com

Phone: +1 703 653 1130

Website: opterna.com

Opterna

Mt Array Trunk Cable Assemblies™

Central Office Solutions

Mt Array Trunk Cable Assemblies™

Applications:

Ordering Info:

• Data center and telecommunication networks

ODCF

• High density connection between active equipment and distribution architectures

Both Sides Connector

MT Connector Type

A B

• Gigabit Ethernet, Local Area Networks, Wide Area Networks, Storage Area Networks

ODCF

Fiber Count Length Excluding Shortest Branch Branches (Equal Length to Total Length If No Branches)

Fiber Type

Polarity

12F

012

001

1 Meter

0.1 Meter

OM3

24F

024

010

10 Meters

0.5 Meter

OM4

048

100

100 Meters

1.0 Meter

OS2

G652D

Other

072

No Branches

XXX

Other

144

XXX

Other

• Backbone links for CATV and video transmission • High density FTTX applications

Parameter Fiber count Connectors Cable type Fiber types Cable diameter (mm) Cable weight (kg/ km) Bending radius

Central Office Solutions

Table 12F 24F 48F Female 12 or 24F MTP® or MTP Elite® (MPO on request) Micro fiber indoor cable with micro tube G652D, OM3, OM4 (Others on request) 3.5 4.6* 10.6* 12.5 14.6 105 20 x cable diameter (10 x cable diameter without load)

72F

144F

12.6* 155

19.5* 336

MTP Elite MTP

ODCF

Operating temperature °C Compliance

0 to +60 ISO/IEC 60793, ISO/IEC 60794, IEC 60332, TIA-604-5, IEC 61754-7, ISO/IEC 11801, TIA-568-C, EIA/TIA-526-7&14A, RoHS * Or over sheathed individual 3.5mm 12F cables

Connector type MTP Elite (MM) MTP (MM) MTP (SM) * Per mated pair

Email: sales@opterna.com

Average IL (dB)* 0.10 0.20 0.10 0.25

Max IL (dB)* 0.35 0.60 0.35 0.75

Phone: +1 703 653 1130

Return loss (dB) N/A N/A >60 >60

Website: opterna.com

Opterna

Email: sales@opterna.com

Phone: +1 703 653 1130

Website: opterna.com

Opterna

Intergrated Collector/Terminal Plate Assembly™

MDU Solutions

Introduction The MultiOpt Collector/Terminal Plate (CTP) combines the functionality of a Collector Plate and a Terminal Plate in one assembly. Two models are available; 72-fiber and a 144-fiber. Both models feature a terminal section that accommodates cables drop with diameters of up to 4.8mm. The 72-fiber model features 6 MT ports and 12 SC/APC ports. One MT port is dedicated to the adjacent 12 SC/APC ports thereby allowing the flexibility of the remaining MTs to be utilized for connecting up to 5 additional TPA’s. The 144-fiber model features 12 MT ports and 24 SC/APC ports. Two MT ports are dedicated to the adjacent 24 SC/APC ports thereby allowing the flexibility of the remaining MTs to be utilized for connecting up to 10 additional TPA’s.

Features

“MultiOpt Integrated Collector/ Terminal” Plate Assembly

• Designed for MDU applications • Integrated Collector and Terminal functionality • 50’, 100’, 200’ and 350’ stub lengths • Riser and Indoor/Outdoor cable stub options • Low insertion/return loss connectors • Enclosureless design • Grounding connection included

Email us at: sales@opterna.com

Call us at: +1 703 653 1130

Visit our website at: opterna.com

Intergrated Collector/Terminal Plate Assembly™ Parameter Connector type Connector count MT ports available for connection to other terminals Plate dimensions Dimensions

Email us at: sales@opterna.com

72-fiber model 6 MT (12 fiber) 12 SC/APC 6

MDU Solutions

144-fiber model 12 MT (12 fiber) 24 SC/APC 12

14.25 diameter x 5.25 in. height

Call us at: +1 703 653 1130

11.4”w x 11.4”h x 5.7”d

Visit our website at: opterna.com

Monitoring Solutions

Fiber Sentinel System™ Introduction

Opterna’s Fiber Sentinel System (FSS) is the answer to the security threats of your optical communication infrastructure. Optical communications systems are generally insensitive to anomalies below a certain level due to its wide optical budget considerations during network designing. Even a very well designed optical communication system will come across undetectable/ unnoticeable signal variations which if not identified instantly can pose a threat to your data protection and information security. Opterna’s Fiber Sentinel System uses WaveSense TechnologyTM to monitor such optical anomalies and provides continuous, real-time, protocol independent physical layer monitoring of a fiber optic communication system. It detects any signal variations (including tapping or signal injections), shuts down instantly and isolates affected path in milliseconds, re-routes the traffic to a back-up fiber path (which will also be monitored) and notifies the network administrator. Fiber Sentinal System thus offers security, network integrity, reliability and redundancy to your optical network.

Features

“Fiber Sentinel System”

• Automatically identifies, differentiates, and characterizes nine distinct optical event types like intrusions, optical signal injection by an intruder, cable breaks, transients, receiver overloads, low optical signal levels, loss of data signal, FSS power off conditions and fiber degradation. • Fiber Sentinel System is non-evasive • Monitors the optical carrier • Does not decode the data on the optical carrier • Optical path redirected by photon switching • Fully passive - data remains in its optical state and is not regenerated • Available in two SNMP versions • Provided with Fiber Sentinel user interface.

Email: sales@opterna.com

Phone: +1 703 653 1130

Website: opterna.com

Opterna

Monitoring Solutions

Fiber Sentinel System™

Monitoring Solutions

Fiber Sentinel System™

Applications: • Telecommunications networks • CATV networks • Secure data processing networks • Government Communications and military infrastructure • Communication infrastructure for Law Enforcement, Banking and Intelligence

Environmental Operating Temp erature

0 C to 550C (32 F to 130 F)

Storage Temperature

-10 C to 65 C (14 F to 150 F)

Humidity (operational)

0% - 90%, non condensing

Humidity (stroage)

0% - 95%, non condensing

Diagnostic LEDs

Power status, Tx & Rx status Primary and backup paths Link/Activity, Ethernet SNMP Port

General

Dimensions & Approvals

Operating wavelength

1310nm

Protocols supported

Protocol independent

Insertion loss

1.5dB typical, 2.4dB maximum

Minimum Channel strength

-45dBm

Maximum Channel strength

+5dBm

Monitoring resolution

0.02dB

Intrusion shutdown time

25ms typical

Backup Path switching time

< 4ms

Data channel cable type

Singlemode

Dimensions

19” rack mountable, 1U 17” x 13” x 1.75”

Data channel connector type

SC duplex, FC (optional), ST (optional)

Approvals

FCC Part 15J Class A,CE, UL 1950 - third edition

Network management

SNMP via Ethernet interface, RS232c console port

Electrical Power input interface

IEC 320, 3 positions

Input Voltage

100 – 240V, 60/50Hz

Email: sales@opterna.com

Phone: +1 703 653 1130

Website: opterna.com

Opterna

Email: sales@opterna.com

Phone: +1 703 653 1130

Website: opterna.com

Opterna

MDU Solutions

Distribution Terminal Plate Assembly™ Introduction

The MultiOptTM Terminal Plate (TPA) is an innovative solution for fiber distribution to living units in a Multi-Family Dwelling Unit environment. The MultiOpt TPA features a plate-mounted rotating spool, on which the fiber tail is stored and fiber cable slack is stored. After mounting the TPA, the installer simply unlocks the spool and pays out the desired length of fiber tail utilizing the supplied pulling eye. The pre-terminated tail can then connect to an Opterna Collector Plate or Collector/Terminal Plate. The TPA may also connect directly to Opterna’s TurnOpt FDH. TPA models are available with one or two fiber tails, with standard stub lengths of 50’, 100’, 200’ and 350’. Each tail is terminated with 12-fiber low loss MT connectors. TPA is available in either 12 fiber or 24 fiber options. Drop cables up to up to 4.8mm in size are supported.

“MultiOpt Distribution Terminal Plate Assembly”

Features

• Designed for MDU applications • Innovative rotating fiber storage spool • One or two 12-fiber MT connector tails, supports 12 or 24 drops • 50’, 100’, 200’ and 350’ stub lengths • Supports up to 4.8mm cables and splice on connectors • Wall-mount design

• Convenient pulling-eye included with each MT-connector

Email: sales@opterna.com

Phone: +1 703 653 1130

Website: opterna.com

Opterna

MDU Solutions

Distribution Terminal Plate Assembly™ Parameter Tail connector type

Specification

Fiber drop cable diameter

MT (12 fiber) SC/APC Up to 4.8mm

Dimensions

11.4”w x 11.4”h x 5.7”d

Fiber drop connector type

Email: sales@opterna.com

Phone: +1 703 653 1130

Website: opterna.com

Opterna

Collector Plate Assembly™

MDU Solutions

Introduction The MultiOptTM Collector Plate Assembly (CPA) is an integral component of Opterna’s fiber connectivity system for Multi- Family Dwelling Unit applications. The MultiOpt CPA provides an intergration point between the FDH and the MultiOpt Terminal Plate, enabling a “Zone” or distribution network design for MDUs. Two models are available, a 72-fiber Collector Plate that serves up to six 12- port Terminals, and a 144-fiber model that serves twelve 12- port or six 24-port Terminals. The CPA features a bend-insensitive fiber cable stub that is pre- terminated with six or twelve 12-fiber MT connectors. Riser- rated or Indoor/Outdoor cable stubs options are available in 50’, 100’, 200’ and 350’ lengths. The MultiOpt Collector Plate is designed to give installers flexibility in selecting mounting/installation options in MDUs, such as walls, panels or exisiting/brownfield enclosures. The Collector Plate includes a ground connection, four mounting holes, and a mounting template/installation guide.

Features

“MultiOpt Collector Plate Assembly”

• Designed for MDU applications • Six or Twelve Pre-terminated 12-fiber MT connections • 50’, 100’, 200’ and 350’ stub lengths • Riser and Indoor/Outdoor cable stub options • Low insertion/return loss connectors • Small foot print enclosureless/wall mount design

Email: sales@opterna.com

Phone: +1 703 653 1130

Website: opterna.com

Opterna

Collector Plate Assembly™ Parameter

MDU Solutions

72-fiber model

144-fiber model

Connector type

MT (12 fiber)

Connector count

Stub cable diameter

0.52 in.

0.59 in.

Plate dimensions

10.5 x 9 x 4 in.

Dimensions

Email: sales@opterna.com

11.4”w x 11.4”h x 5.7”d

Phone: +1 703 653 1130

Website: opterna.com

Opterna

Opterna Opterna R

Fiber Optic Multi Loose Tube Cable OSP Solutions

Introduction Opterna fiber optic dielectric single jacket multi loose tube cable is a UV-stabilized, fully water blocked cable for Indoor & Outdoor duct applications. The loose tube design provides stable and highly reliable transmission parameters for a variety of voice, data, video and imaging applications. This lightweight cable offers durability and flexibility required for many outside plant uses. RoHS (Restriction of the use of Certain Hazardous Substances Directive) Complied

All Dielectric Single Jacket Non Armor Multi Loose Tube

Features:

• Multi loose tube construction

Optical Fiber Filling Compound

• Lightweight

Loose Buﬀer Tubes Core Wrapping Tapes Black PE/LSZH Jacket

• Each fiber is color coded for easy identification

Water Blocking Yarn or Jelly

• Color coded loose tubes for easy identification

Outer strength Member Ripcord Central strength Member

• LSZH jacket for Indoor/outdoor applications 36-Fiber Cable

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODCTrev1

1/3

Opterna Opterna R

Fiber Optic Multi Loose Tube Cable OSP Solutions Applications: • Building Interconnections (Campus LAN) • FTTx applications • CCTV applications Standards: • Telcordia GR-20-CORE • IEC 60793 / IEC 60794 • IEC 60332-1,3 • IEEE 383 Options:

• Fiber - Singlemode OS2 - G.652.D, 62.5μm (OM1), 50μm (OM2, OM3 & OM4) multimode available

Color of Buffer: 01 - Blue

05 - Slate

09 - Yellow

02 - Orange

06 - White

10 - Violet

03 - Green

07 - Red

11 - Pink

04 - Brown

08 - Black

12 - Aqua

Transmission Performance: Optical Fiber

62.5/125 μm OM1 (850/1300)

50/125 μm OM2 (850/1300)

50/125 μm OM3 (850/1300)

50/125 μm OM4 (850/1300)

9/125 μm OS2 (1310/1550)

3.5/1.0

3.0/1.0

0.40/0.30

200/500

500/500

1500/500

3500/500

10Gbps

300

550

1Gbps

275/550

550/550

Attenuation (dB/km) Typical values Minimum Bandwidth (MHz •km) Ethernet Link Distance (m)

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODCTrev1

2/3

Opterna Opterna R

Fiber Optic Multi Loose Tube Cable OSP Solutions Mechanical & Environmental: Storage Temperature : -40 to + 75째C / Operating Temperature : -20 to + 70째C Fiber Count

Nominal Diameter

Nominal Weight

Maximum Tensile Load

Crush Load

[mm]

[kg/km]

[N]

[N/cm]

10.5/11.2

86/115

2,700

1000

10.5/11.2

86/115

2,700

10.5/11.2

86/115

10.5/11.2

Short Term Long Term Short Term Long Term

Minimum Bend Radius Loaded

Installed

[N/cm]

[mm]

110

210/224

105/112

1000

110

210/224

105/112

2,700

1000

110

210/224

105/112

86/115

2,700

1000

110

210/224

105/112

11.0/11.7

92/130

2,700

1000

110

220/234

110/117

11.0/11.7

92/130

2,700

1000

110

220/234

110/117

12.1/13.7

113/167

2,700

1000

110

240/274

121/137

120

13.6

139

2,700

1000

110

270

136

144

15.0

167

2,700

1000

110

300

150

228

15.8

178

2,700

1000

110

320

158

276

17.0

212

2,700

1000

110

340

170

300

17.7

228

2,700

1000

110

350

177

*Denotes norminal value for PE / LSZH Jacketed Cable.

Ordering Info:

FC-XXX-MLT-NA-YYY-PE

Fiber Optic Single Jacket Non Armor Multi Loose Tube, PE jacket

FC-XXX-MLT-NA-YYY-LZ

Fiber Optic Single Jacket Non Armor Multi Loose Tube, LSZH jacket

XXX : OS1, OS2, 7A1, 7A2, 7B2, 7B3, 655, OM1, OM2, OM3, OM4 YYY : Number Of cores

Shipping Information:

Standard Reel Length

4000m

*Other Cable lengths may be available upon request Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODCTrev1

3/3

Opterna Opterna R

BuildOpt™ Collector Plate Assembly (CPA) MDU Solutions Introduction The Opterna® BuildOpt CPA is a collection point for plug-and-play fiber distribution terminals, enabling a complete fiber distribution system for MDU and other FTTx applications. Two models are available: a 72-fiber CPA with six MPO ports (12 fibers per MPO port), and a 144-fiber model with twelve MPO ports. The 12-fiber cable tails from BuildOpt Terminals plug into the CPA MPO ports. The CPA cable stub consists of bend-insensitive single mode fiber arranged in 12-fiber ribbons. Riser-rated and Indoor/Outdoor cable stubs are available in 100’, 200’ and 350’ lengths. The BuildOpt CPA is designed for enclosureless or 3rd-party enclosure applications. The metal mounting plate includes a ground connection and four mounting holes. Contact Opterna today for more information on the BuildOpt Series and other innovative FTTx solutions.

Features

Collection Point for MPO Terminations

• Designed for MDU and other FTTx applications • Six or Twelve 12-fiber MPO connections • Extremely low connector insertion loss and return loss • Enclosureless design • Riser and Indoor/Outdoor cable stub options • 100’, 200’ and 350’ stub lengths

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSAMCPrev1

1/2

Opterna Opterna R

BuildOpt™ Collector Plate Assembly (CPA) MDU Solutions Applications: • Multi-Family Dwelling Units • Multi-Tenant • Commercial/Industrial fiber networks

Specifications: 72-fiber model

144-fiber model

Cable type

12-fiber ribbon, Riser or Indoor/Outdoor

Fiber type

G.657.A bend insensitive single mode

Cable jacket diameter 12-fiber MPO Ports

0.52 inches

0.60 inches

Connector Insertion Loss

0.3 dB

Return Loss

> 65dB

Plate Material

Metal

Dimensions

10.5 x 9 x 3.5 inches 265 x 227 x 89 mm

Listings

UL, cUL (or cETL)

Ordering Info: Part Number

Fiber Count

Cable Type

Cable Length (ft)

AMCP6-1MMNC-100

riser

100

AMCP6-1MMNC-200

riser

200

AMCP6-1MMNC-350

riser

350

AMCP6-2MMNC-100

Indoor/Outdoor

100

AMCP6-2MMNC-200

Indoor/Outdoor

200

AMCP6-2MMNC-350

Indoor/Outdoor

350

AMCP12-1MMNC-100

144

riser

100

AMCP12-1MMNC-200

144

riser

200

AMCP12-1MMNC-350

144

riser

350

AMCP12-2MMNC-100

144

Indoor/Outdoor

100

AMCP12-2MMNC-200

144

Indoor/Outdoor

200

AMCP12-2MMNC-350

144

Indoor/Outdoor

350

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSAMCPrev1

2/2

Opterna Opterna R

BuildOpt™ Collector/Terminal Plate (CTP) MDU Solutions Introduction The Opterna® BuildOpt Collector/Terminal Plate combines the functionality of a Collector and Terminal in one assembly, providing integrated fiber distribution in a high-rise building and other FTTx applications. The 72-fiber CTP consists of 6 MPO and 12 SC/APC ports. One MPO port is dedicated to the 12 SC/ APC ports; the remaining 5 MPO’s are available for connection to BuildOpt Terminals. A 144-fiber model features 12 MPO and 24 SC/APC ports; 2 MPO ports are dedicated to the 24 SC/APC ports and 10 are free for Terminal connections. The bend-insensitive ribbon fiber stub is available in riser-rated and Indoor/Outdoor cable, with stub lengths of 100’, 200 and 300’. The cable management features of the Terminal section accommodate up to 4.8mm diameter drop cables. The BuildOpt CTP is designed for enclosureless or 3rd-party enclosure applications. The metal mounting plate includes a ground connection and four mounting holes. Contact Opterna today for more information on the BuildOpt Series and other innovative FTTx solutions.

Features

Integrated Collector and Terminal

• Designed for MDU and other FTTx applications • 72 or 144 fiber channels, 12 or 24 terminal ports • Extremely low connector insertion loss and return loss • Enclosureless design • Riser and Indoor/Outdoor cable stub options • 100’, 200’ and 300’ stub lengths

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSACTPrev1

1/3

Opterna Opterna R

BuildOpt™ Collector/Terminal Plate (CTP) MDU Solutions

Applications: • Multi-Family Dwelling Units • Multi-Tenant • Commercial/Industrial fiber networks

Specifications:

72-fiber model

144-fiber model

Cable type

12-fiber ribbon, Riser or Indoor/Outdoor

Fiber type

G.657.A bend insensitive single mode

Cable jacket diameter

0.52 inches

0.60 inches

SC/APC Terminal Ports

12-fiber MPO Ports Available for connection to other terminals

Connector Insertion Loss

0.3 dB

Return Loss

> 65dB

Plate Material

Metal

Dimensions

14.25 dia x 5 inches 362 dia x 130 mm

Listings

Americas: (703) 653-1130 sales.us@opterna.com

UL, cUL (or cETL)

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSACTPrev1

2/3

Opterna Opterna R

BuildOptâ&#x201E;˘ Collector/Terminal Plate (CTP) MDU Solutions

Ordering Info:

Part Number

Fiber Count

Cable Type

Cable Length (ft)

ACTP6-1MMNC-100

riser

100

ACTP6-1MMNC-200

riser

200

ACTP6-1MMNC-300

riser

300

ACTP6-2MMNC-100

Indoor/Outdoor

100

ACTP6-2MMNC-200

Indoor/Outdoor

200

ACTP6-2MMNC-300

Indoor/Outdoor

300

ACTP12-1MMNC-100

144

riser

100

ACTP12-1MMNC-200

144

riser

200

ACTP12-1MMNC-300

144

riser

300

ACTP12-2MMNC-100

144

Indoor/Outdoor

100

ACTP12-2MMNC-200

144

Indoor/Outdoor

200

ACTP12-2MMNC-300

144

Indoor/Outdoor

300

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSACTPrev1

3/3

Opterna Opterna R

BuildOpt™ Terminal Plate Assembly (TPA) MDU Solutions Introduction The Opterna® BuildOpt TPA is an innovative solution for plug-and-play fiber distribution to living units in a Multi-Family Dwelling Unit environment and other FTTx applications. Ideal for surface-mount applications where an enclosure is not needed, the BuildOpt TPA features a plate-mounted rotating spool, on which the fiber cable tail is stored during shipment. After mounting the TPA on the wall, the installer simply unlocks the spool and pays out the desired length of cable tail. The installer then reels in the excess cable for safe storage and locks the spool. The MPO-terminated tail can connect to an Opterna BuildOpt Collector, Collector/Terminal Plate (CTP) or a TurnOpt™ FDH. Contact Opterna today for more information on the BuildOpt Series and other innovative FTTx solutions.

Features

Rotating Fiber Storage Spool

• Enclosureless design • One or two 12-fiber MPO connector tails • 12 or 24 SC/APC subscriber ports • 100’, 200’ and 350’ tail lengths • Supports up to 4.8mm drop cables

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSADTPrev1

1/2

Opterna Opterna R

BuildOpt™ Terminal Plate Assembly (TPA) MDU Solutions Applications: • Multi-Family Dwelling Units • Multi-Tenant • Commercial/Industrial fiber networks

Specifications:

Cable

12f flat ribbon riser

Fiber

G.657.B3 bend insensitive single mode

Connector Insertion Loss

0.3 dB

Return Loss

> 65dB

Plate Material

Metal

Dimensions

11.4 x 11.4 x 5.7 inches 290 x 290 x 145 mm

Safety

UL, cUL

Ordering Info: Parameter

Subscriber Ports

Cable Tail length

ADTPA-1SAFM-100

100

ADTPA-1SAFM-200

200

ADTPA-1SAFM-350

350

ADTPB-1SAFM-100

100

ADTPB-1SAFM-200

200

ADTPB-1SAFM-350

350

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSADTPrev1

2/2

Opterna Opterna R

Build-Out Attenuators Fiber Interconnect & Passives

Introduction Opterna Build-out Attenuators (BOA) are used in communication systems to reduce optical power, launched onto photo detectors. These high performance devices are designed to give accurate attenuation over a wide range of wavelengths. The plug type design allows to use directly on the ends of the fiber jumpers and to insert directly in to the adapter. Available in ST, FC, SC, LC, & MU styles with SPC, UPC & APC finish, BOA have high return loss and superior performance. Opterna BOA comply strictly to the international standards and all fully compatible with other standard products

Features

Build-Out Attenuators

• All passive technology • Available in ST, SC, FC, LC, & MU versions • Higher performance SPC, UPC & APC options • Metal ion doped fiber • Extreme stability in thermal variations • GR-910-CORE COMPLIANT • Broadband performance, Flat Spectral response • Environmentally stable • High Power Endurance • Mating Durability: <0.2sB over 1000 cycles

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSATNrev1

1/3

Opterna Opterna R

Build-Out Attenuators Fiber Interconnect & Passives Applications: • DWDMs • Overpowered fiber optic systems • Long-haul telecommunications • Telecoms, CATV, LAN & WAN • Fiber in the loop (FITL) • PON & Fiber Optic Communications Systems • Test & Measurement set up

Specifications:

Package type

SC, ST, FC, LC & MU

Available Range of attenuation Operating Wavelength Operating Band pass

Attenuation Tolerance

1 to 30 dB with 1dB increments (or custom attenuation within this range) 1310nm and 1550nm (Or single wavelength) Digital Band (Telcordia Spec.)

1260-1360nm and 1430-1580nm

S + C + L Band

1480-1610nm

Special Band pass

1310±25nm and 1470-1610nm

Single Window

1280-1340nm or 1510-1590nm

Dual Window

1310 and 1550nm (±25nm) Grade

Premium

Standard

Attenuators upto 5dB

± 0.5 dB

± 0.75 dB

Attenuators, 6 to 10dB

± 10% of attenuation

± 15% of attenuation

Attenuators,11dB to 19dB

± 10% of attenuation

± 15% of attenuation

Attenuators, 20dB to 30dB

± 10% of attenuation

± 15% of attenuation

Reflectance, SPC

=50 dB

Reflectance UPC

=55 dB

Reflectance, APC

= 60 dB

Operating Temperature

-40 to +75°C

Storage Temperature

-40 to +85°C

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSATNrev1

2/3

Opterna Opterna R

Build-Out Attenuators Fiber Interconnect & Passives Size & Dimensions:

FC Type

MU Type

SC Type

LC Type

(All dimensions in mm)

Ordering Info: ATN Attenuation

Grade

Package Style

Endface Finish

Operating Wavelength

Band Pass

01 1 dB

Premium

FC Style

SPC

SPC Finish, RL >50dB

1310

1310nm

Single Window

02 2 dB

Standard

SC Style

UPC UPC Finish, RL >55dB

1550

1550nm

Dual Window

03 3 dB and so on

ST Style

APC

1315

1310 and 1550nm

S+ C+ L Band

30 Upto 30dB

LC Style

1214

1260-1360 & 1430-1580nm

Special Band Pass

APC Finish, RL >60dB

MU MU Style

MU Digital Band (Telcordia)

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSATNrev1

3/3

Opterna Opterna R

Fiber Optic Adaptors Fiber Interconnect & Passives

Introduction Opterna adaptors are manufactured using high quality, resilient sleeves which provide precise interconnectivity of connector ferrules resulting in low insertion and return loss. The sleeves are enclosed in high quality engineering plastic designed for all fiber optic connector types ensuring the corresponding connector parts dock well and are securely held. Opterna adaptors are available in simplex, duplex and quad options which cater to the intermateability requirements of any fiber network such as WAN, LAN, CATV, FTTx and testing. The adaptors are available in standard colors to distinguish between singlemode PC/APC and multimode PC types. Opterna adaptors conform strictly to international standards and are compatible with other manufacturers’ standard connectors and interface products.

Features

Fiber Optic Adaptors

• Available for all Multimode and Singlemode types • Available in plastic and metal housing • Available in symmetrical and hybrid types • High quality resilient ceramic and metal sleeves • Easy installation with simple clamping mechanism • Color coded for easy identification • Mating Durability: 1000 cycles; <0.2 dB change • Temperature range: -40 to +80°C • IEC, EIA/TIA and GR-326-CORE compliant

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSADrev1

1/3

Opterna Opterna R

Fiber Optic Adaptors Fiber Interconnect & Passives Applications: • Patchpanel and wall box connection interface • FTTX deployments • Pre-terminated assembly interconnection • Telecoms, Data Centers, CATV, LAN & WAN • Testing and inspection

Size & Dimensions:

SC SIMPLEX ADAPTOR

FC ADAPTOR

LC QUAD ADAPTOR

LC DUPLEX ADAPTOR

ST ADAPTOR

MPO ADAPTOR

Note: Other adaptor drawings available on request

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSADrev1

2/3

Opterna Opterna R

Fiber Optic Adaptors Fiber Interconnect & Passives Ordering Info: AD Adapter Configuration

Connector Finish

Sleeve Type

Configuration

Housing Color

Phosphor Bronze

Simplex

Beige

SC flanged

APC

Zirconia

Duplex

Blue

SC non-flanged

Adapters without sleeves

Quad

Green

FC Single D type

AQ Aqua

FC Double D type

Heather violet

FC Square type

Black

LC on SC footprint flanged

ME Metal

LC on SC footprint nonflanged

LC on RJ 45 footprint flanged

LC on RJ 45 footprint nonflanged

MTP ELITE

MPO PREMIUM

MTP

MPO

MTRJ

SMA

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSADrev1

3/3

Opterna Opterna R

Fiber Optic Breakout Cable OSP Solutions

Introduction Opterna fiber optic breakout cables are rugged, high performance optical communication cables suitable for inside plant installations. Fiber optic breakout cable contains multiple individual fibers each with its own aramid strength member and jacket which makes the cable more reliable and rugged for critical applications. Breakout Cable is designed for routing cables to different locations and direct termination of fibers in the field. The cable is also suitable for pre-terminated cable assemblies.

ONFR (rated), OFNP (Plenum rated) or LSZH rated

Features:

2.0mm Sub-Unit Optical Fiber 0.9mm buﬀered Fiber

• Short and moderate distance links within a building, where multiple termination points are needed

Aramid Yarns Sub-unit Jacket Central atrength Member Ripcord PVC Outer jacket

• OFNR (riser rated), OFNP (plenum rated) or LSZH (low smoke zero halogen rated) • Direct Termination on 2.0 mm Sub-Units • RoHS (Restriction of the use of Certain Hazardous Substances Directive) complied

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC1rev1

1/3

Opterna Opterna R

Fiber Optic Breakout Cable OSP Solutions Applications: • Backbone & Computer Room Cabling • CCTV, Factory automation, Utility segments • Pre-terminated cable ass

Specifications: • ISO/IEC 11801 • Telcordia GR-409-CORE • ANSI/ ICEA S-83-596

Options:

• Fiber - Single mode, 50, 62.5μm multi mode available • Higher fiber counts available upon request • Other Sub-Unit Diameters Available (1.8mm, 2.4 mm, 2.9mm etc.) • Buffered fiber : Natural (white) • For Sub-unit & Outer Jacket color - Single Mode 9/125 : Yellow - 62.5/125 OM1 1Gbe : Orange - 50/125 OM2 1Gbe : Orange - 50/125 OM3 10Gbe : Aqua - 50/125 OM4 10Gbe : Heather Violet

Subunit Identifications:

The identification code & number is printed on the sub-unit jacket every 10 cm (eg. 62.5MM#1, 62.5MM#2)

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC1rev1

2/3

Opterna Opterna R

Fiber Optic Breakout Cable OSP Solutions Transmission Performance: Optical Fiber

62.5/125 μm OM1 (850/1300)

50/125 μm OM2 (850/1300)

50/125 μm OM3 (850/1300)

50/125 μm OM4 (850/1300)

9/125 μm OS2 (1310/1550)

3.5/1.0

3.0/1.0

0.40/0.30

200/500

500/500

1500/500

3500/500

10Gbps

300

550

1Gbps

275/550

550/550

Attenuation (dB/km) Typical values Minimum Bandwidth (MHz •km) Ethernet Link Distance (m)

Mechanical Characteristics: Storage Temperature : -20 to + 70 / Operating Temperature : -10 to +60 °C Fiber Count

Nominal Diameter

Nominal Weight

Maximum Tensile Load

Crush Load

[mm]

[kg/km]

[N]

[N/cm]

7.5

660

300

7.7

660

9.5

10.5

Short Term Long Term Short Term Long Term

Minimum Bend Radius Loaded

Installed

[N/cm]

[mm]

150

300

154

660

300

160

660

300

190

1320

660

210

105

Ordering Info:

FC-XXX-BTC-NA-YYY-LZ-ZZ FC-XXX-BTC-NA-YYY-NR-ZZ FC-XXX-BTC-NA-YYY-NP-ZZ XXX : OS1, OS2, 7A1, 7A2, 7B2, 7B3, 655, OM1, OM2, OM3, OM4 YYY : Number of Cores ZZ : YL, OR, AQ, HV

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC1rev1

3/3

Opterna Opterna R

Fiber Optic Central Loose Tube Cable OSP Solutions

Introduction Opterna single jacket single armored central loose tube cable is a UV-stabilized, fully water blocked cable for outdoor duct and direct burial applications. The loose tube design provides stable and highly reliable transmission parameters for a variety of voice, data, video and imaging applications. This lightweight cable offers durability and flexibility required for many outside plant application. Compact design for limited conduit space, the cables are well suited for campus-type environments in and between buildings without building entry joints. RoHS (Restriction of the use of Certain Hazardous Substances Directive) complied.

Single Jacket Single Armor Central Loose Tube Cable

Features:

• Central loose tube construction

Optical Fiber Filling Compound

• Lightweight

Loose Buﬀer Tubes Water Swellable Tape Steel Tape Armor

• Compact design for limited conduit space

Outer PE/LSZH Jacket

• Each fiber is color coded for easy identification • LSZH jacket for Indoor/outdoor applications

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Ripcord 12-Fiber Cable

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Steel Wires

Visit: Opterna.com DSFC6rev1

1/3

Opterna Opterna R

Fiber Optic Multi Loose Tube Cable OSP Solutions Applications: • Building Interconnections (Campus LAN) • FTTx & Telecommunications Networks Standards: • Telcordia GR-20-CORE • IEC 60793 / IEC 60794 • IEC 60332-1,3

Options:

• Fiber - Singlemode OS2 - G.652.D, 62.5μm (OM1), 50μm (OM2, OM3 & OM4) multimode available

Color of Buffer: 01 - Blue

07 - Red

13 - Blue / Single stripe

19 - Red / Single stripe

02 - Orange

08 - Black

14 - Orange / Single stripe

20 - Natural

03 - Green

09 - Yellow

15 - Green / Single stripe

21 - Yellow / Single stripe

04 - Brown

10 - Violet

16 - Brown / Single stripe

22 - Violet / Single stripe

05 - Slate

11 - Rose

17 - Slate / Single stripe

23 - Rose / Single stripe

06 - White

12 - Aqua

18 - White / Single stripe

24 - Aqua / Single stripe

Transmission Performance: Optical Fiber

62.5/125 μm OM1 (850/1300)

50/125 μm OM2 (850/1300)

50/125 μm OM3 (850/1300)

50/125 μm OM4 (850/1300)

9/125 μm OS2 (1310/1550)

3.5/1.0

3.0/1.0

0.40/0.30

200/500

500/500

1500/500

3500/500

10Gbps

300

550

1Gbps

275/550

550/550

Attenuation (dB/km) Typical values Minimum Bandwidth (MHz •km) Ethernet Link Distance (m)

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC6rev1

2/3

Opterna Opterna R

Fiber Optic Multi Loose Tube Cable OSP Solutions Mechanical & Environmental: Storage Temperature : -40 to + 75째C / Operating Temperature : -20 to + 70째C Construction

Single Jacket/ Single Tube

Fiber Count

Nominal Diameter

Nominal Weight

Maximum Tensile Load

Crush Load

Loaded

Installed

[mm]

[kg/km]

[N]

[N/cm]

[mm]

10.4

130

1500

600

220

110

208

104

10.4

130

1500

600

220

110

208

104

10.4

130

1500

600

220

110

208

104

10.4

130

1500

600

220

110

208

104

10.4

130

1500

600

220

110

208

104

10.4

130

1500

600

220

110

208

104

10.4

130

1500

600

220

110

208

104

10.4

130

1500

600

220

110

208

104

10.4

130

1500

600

220

110

208

104

Short Term Long Term Short Term Long Term

Minimum Bend Radius

*Denotes norminal value for PE / LSZH Jacketed Cable.

Ordering Info:

FC-XXX-CLT-SA-YYY-LZ

Fiber Optic Single Jacket Single Armor Central Loose Tube, glass yarn, LSZH jacket

FC-XXX-CLT-SA-YYY-PE

Fiber Optic Single Jacket Single Armor Central Loose Tube, glass yarn, PE jacket

XXX : OS1, OS2, 7A1, 7A2, 7B2, 7B3, 655, OM1, OM2, OM3, OM4 YYY : Number of Cores

Shipping Information:

Standard Reel Length

4000m

*Other Cable lengths may be available upon request

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC6rev1

3/3

Opterna Opterna R

Fiber Optic Connectors OSP Solutions Introduction Opterna fiber optic connectors are made with precision and high quality ceramic ferrules and provide a highly reliable connection when used with the various adapters. All standard fiber optic connector such as SC, ST, FC which use 2.5mm ferrule and small form factor connectors such as LC & MU which use 1.25mm ferrule are available. Opterna fiber connector series also has multi-fiber connectors like MTRJ and MTP/ MPO as well. They are available in single-piece option which provides ease of installation in field application and multi-piece options that are generally applicable for use in termination houses. Available in Duplex, Simplex, MM and SM options with PC, UPC and APC finishes with standard color coding for ease of identification. These connectors are suitable for 900μm and 2-3mm cable. They strictly conform to international standards and provide consistent long-term mechanical and optical performance.

Features:

Fiber Optic Connectors

• Options for Multimode and Singlemode • Higher performance Ultra and Angled PC connector options • Pre-radiused ferrule for PC (physical contact) or SPC (super physical contact) polishers • Plastic and metallic housing • Complies with Telcordia GR-326-CORE • Insertion loss: <0.3dB (connector related) • Return loss: >50 dB (UPC) • Return loss: >60 dB (APC) • Mating Durability: 1000 cycles; <0.2 dB • Temperature range: -40 + 80°C (cable temperature performance may impose limitations)

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSAMCPrev1

1/3

Opterna Opterna R

Fiber Optic Connectors OSP Solutions Applications: • All fiber interconnection • Telecom Distribution and Local Area Networks • Data Communication Systems Optical Performance: Parameters Parameters

MM (1300nm)

SM (1310nm &/or 1550nm)

All¹

SMA & MTRJ

All¹

¹All APC

E-2000/ APC

Insertion Loss

0.30

0.50

0.30

Back reflection

-50.0

-60.0

-70.0

¹All connectors other than listed to the right

Dimensional

Capillary Diameter

(MM) 126 -0/ +3μm (SM)

Ferrule Diameter

126 -0/ +1 μm 2.499mm ± 0.001

Environmental & Mechanical:

Temperature Cycling Test (IEC 874-1 clause 4.5.22) -40°C to +70°C, 20 cycles Change in attenuation ≤ 0.2dB Mating Durability (IEC 874-1 clause 4.5.32)

500 mating cycles Change in attenuation ≤ 0.2dB

Axial Cable Retention Test (TIA/EIA-455-6B)

100N for 30 seconds retained at fully loaded condition; Change in attenuation ≤ 0.2dB

Impact Test (IEC 794-1-E4)

Radial free fall at radius of 0.5m; 8 impacts Change in attenuation ≤ 0.2dB

Drop Test (IEC 874-1 clause 4.5.14)

25 drops from a drop height of 1.5m Change in attenuation ≤ 0.2dB

Operating Temperature

-40°C to 80°C (check cable temperature performance)

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSAMCPrev1

2/3

Opterna Opterna R

Fiber Optic Connectors OSP Solutions Ordering Info:

Assembly type

Channel

Connector Type

Connector Finish

Fiber Type

Back Shell Dia./ Type

Connector Color Code

SCN

Single piece

Simplex

ST connector

Multimode

2.8mm dia.

Beige

MCN

Multi-piece

Duplex

SC connector

UPC

Singlemode

2.0mm dia.

Blue

Multi-fiber

SC duplex

APC

900um

Green

FC connector

Custom

Yellow

LC connector

Round

Black

LC duplex

Ribbon

Aqua

MU connector

Heather Violet

MU duplex

E-2000 connector

MTRJ connector

FDDI connector

MPO

MTP

SMA

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSAMCPrev1

3/3

Opterna Opterna R

Fiber Optic Distribution Cable OSP Solutions

Introduction Opterna fiber optic tight buffered distribution cables are rugged, high performance optical communication cables suitable for inside plant installations. Ideally used in backbone or computer room cabling.

900um tight buered glass yarn strength member

Features:

• Tight buffered construction

Optical Fiber 0.9mm Buffered Fiber

• 900um buffered design for easy termination

Glass Yarns Sub-unit Jacket

• Each fiber is color coded for easy identification

Ripcord

• Compact design for limited conduit space

Coated Central Strength Member

• RoHS compliant

Ripcord Outer Jacket Sub-Unit Construction

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Single Unit Construction

Visit: Opterna.com DSFC3rev1

1/4

Opterna Opterna R

Fiber Optic Distribution Cable OSP Solutions Applications: • Data centers • Indoor riser backbone applications Standards: • TIA/EIA-568-C.3 • ISO/IEC 11801 • Telcordia GR-409-CORE • ANSI/ICEA S-83-596 •IEC 60332-1, IEC 60754-2 & IEC 61034 Options • Fiber - Singlemode OS2 - G.652.D, 62.5 μm (OM1), 50μm (OM2,OM3, OM4) multimode available • For indoor/outdoor applications, outer cable jacket shall be black • For Sub-unit & Outer Jacket color - Single Mode 9/125 : Yellow - 62.5/125 1Gbe : Orange - 50/125 1Gbe : Orange - 50/125 10Gbe : Aqua - 50/125 10Gbe : Heather Violet • The identification code & number is printed on the sub-unit jacket every 10 cm (eg. SM#1, SM#2) • Outer jacket : PVC or LSZH (Low Smoke Zero Halogen) Color of Buffer: 01 - Blue

07 - Red

13 - Blue / Black dash

19 - Red / Black dash

02 - Orange

08 - Black

14 - Orange / Black dash

20 - Black / White dash

03 - Green

09 - Yellow

15 - Green / Black dash

21 - Yellow / Black dash

04 - Brown

10 - Violet

16 - Brown / Black dash

22 - Violet / Black dash

05 - Grey

11 - Pink

17 - Grey / Black dash

23 - Pink / Black dash

06 - White

12 - Aqua

18 - White / Black dash

24 - Aqua / Black dash

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC3rev1

2/4

Opterna Opterna R

Fiber Optic Distribution Cable OSP Solutions Transmission Performance: Optical Fiber

62.5/125 μm OM1 (850/1300)

50/125 μm OM2 (850/1300)

50/125 μm OM3 (850/1300)

50/125 μm OM4 (850/1300)

9/125 μm OS2 (1310/1550)

3.5/1.0

3.0/1.0

0.40/0.30

200/500

500/500

1500/500

3500/500

10Gbps

300

550

1Gbps

275/550

550/550

Attenuation (dB/km) Typical values Minimum Bandwidth (MHz •km) Ethernet Link Distance (m)

Cable Construction: Construction of the Single-unit Cable Number of Fibers

2 ~ 24

Type of fiber

Single Mode* 9/125 μm (OS2 G.652.D), Multimode 62.5/125 μm (OM1), 50 /125 μm (OM2,OM3, OM4)

Tight Buffer Coating

Outer diameter: 900±50 μm

Dielectric Strength Member

Glass yarn

Ripcord

One ripcord (For 6 ~ 24 fiber cable)

Outer Jacket Material

LSZH Compound

Construction of the Multi-unit Cable Number of Fibers

18~144

Type of fiber

Single Mode* 9/125 μm (OS2 G.652.D), Multimode 62.5/125 μm (OM1), 50 /125 μm (OM2,OM3, OM4)

Tight Buffer Coating

Outer diameter: 900±50 μm

Sub-unit

No. of the Tight Buffered Fibers

6: For 18~36 Fiber Cable 12 : For 48~144 Fiber Cables

Dielectric Strength Member

Glass yarn

Sub-unit Jacket

LSZH Compound

Dielectric CSM

FRP or FRP with LSZH Coating

Ripcord

Two ripcords

Outer Jacket Material

LSZH Compound

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC3rev1

3/4

Opterna Opterna R

Fiber Optic Distribution Cable OSP Solutions Mechanical & Environmental: Storage Temperature : -40 to + 75째C / Operating Temperature : -20 to + 70째C Construction

Fiber Count

Single Unit

6 Fiber Subunits

Nominal Diameter

Nominal Weight

Maximum Tensile Load

Crush Load

[mm]

[kg/km]

[N]

[N/cm]

4.5

660

300

5.3

660

5.7

6.0

Short Term Long Term Short Term Long Term

Minimum Bend Radius Loaded

Installed

[N/cm]

[mm]

300

660

300

660

300

105

6.7

660

300

105

8.4

1320

660

130

8.9

1320

660

130

9.8

1320

660

100

150

14.8

155

1550

750

100

220

150

Ordering Info:

FC-XXX-TBC-NA-YYY-LZ-ZZ

Fiber Optic Distribution Cable, 900um tight buffered glass yarn strength member, LSZH

FC-XXX-TBC-NA-YYY-NR-ZZ

Fiber Optic Distribution Cable, 900um tight buffered glass yarn strength member, Riser

FC-XXX-TBC-NA-YYY-NP-ZZ

Fiber Optic Distribution Cable, 900um tight buffered glass yarn strength member, Plenum

XXX : OS1, OS2, OM1, OM2, OM3, OM4 YYY : Number of Cores ZZ : YL, OR, AQ, HV

Shipping Information:

Standard Reel Length

4000m

*Other Cable lengths may be available upon request

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC3rev1

4/4

Opterna Opterna R

Fiber Optic Indoor Drop Cable OSP Solutions

Introduction Opterna flat drop indoor cable is constructed with one or two single mode fiber protected by dielectric strength member made of fiberglass reinforced plastic (FRP) and a LSZH outer jacket. Ideal for use in FTTx applications between the building’s main telecommunications room and the apartment/office consolidation point. Utilizing a 250mm fiber, the cable unit is suitable for use with industry standard connector.

Features:

Fiber Optic Indoor Drop Cable

• Robust and lightweight • Colour coded fibers for easy identification • LSZH jacket for internal use Optical Fiber

• Standard cable length of 1 Km

FRP Strength Member Outer Jacket

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC8rev1

1/3

Opterna Opterna R

Fiber Optic Indoor Drop Cable OSP Solutions Applications: • FTTx applications • MDU / SDU Standards: • ITU.T G.652D / G.657A Cable Construction: Parameter

Value

Primary Coating Color Layer

250 ± 15 μm

Dielectric Strength Member

FRP Ø 0.58 ± 0.05mm

Outer Jacket

LSZH

Color of Buffer: 1 core Drop Cable

01 Blue

2 core Drop Cable

01 Blue

02 Orange

Transmission Performance: Fiber Types

Maximum Attenuation:

Value

G.652D/G.657A1

@1310nm @1550nm

0.4dB/km 0.3dB/km

Maximum Dispersion

ps/nm/km

≤3.5@1285~1339nm ≤18@1550nm

Cutoff Wavelength

<1260

Mode Field Diameter

μm

9.2 ± 0.5@1310nm 10.5 ± 0.8@1550nm

Core Clad Concentricity

μm

≤0.5

Cladding Diameter

μm

125 ± 1

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC8rev1

2/3

Opterna Opterna R

Fiber Optic Indoor Drop Cable OSP Solutions Mechanical & Environmental:

Temperature Range

-40⁰C to +60⁰C

Fire Performance

IEC 60332-1, IEC 60754-2 & IEC 61034

Cable Properties: Sheath Color

White

Fiber Count

1 or 2

Nominal Diameter [mm]

2.0×3.0 ± 0.2mm

Nominal Weight [Kg/Km]

Maximum Tensile Load

Minimum Bend Radius

Short Term [N]

Long Term [N]

Loaded [mm]

Installed [mm]

652D

657A

652D

Crush Resistance

657A

Short Term [N]

Long Term [N]

1000

500

Ordering Info:

FC-XXX-DRPA-NA-YYY-LZ

Fiber Optic Singlemode Indoor Drop Cable, LSZH

XXX : OS1, OS2, 7A1, 7B2, 7B3 YYY : 001, 002

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC8rev1

3/3