Opterna datasheets 2 by SENTOR ELECTRICAL

Opterna Opterna R

Fiber Optic Outdoor Drop Cable OSP Solutions

Introduction Opterna outdoor flat drop cable is constructed with one or two single mode fiber (ITU-T G.652D). The cable is protected by a dielectric strength member made of fiberglass reinforced plastic (FRP), steel wire and a LSZH outer jacket. Designed for outdoor installation the cable is well suited for connections between the dome closure and small dwelling unit/ warehouse and independent villas. Utilizing a 250μm fiber, the cable unit is suitable for use with industry standard connector.

Features:

Fiber Optic Outdoor Drop Cable

• Robust and lightweight • Colour coded fibers for easy identification • LSZH jacket for internal use • Standard cable length of 1 Km

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC8rev1

1/3

Opterna Opterna R

Fiber Optic Outdoor Drop Cable OSP Solutions Applications: • FTTx applications • CCTV Standards: • ITU.T G.652D / G.657A Cable Construction: Parameter

Value

Primary Coating Color Layer

250 ± 15 μm

Dielectric Strength Member

FRP Ø 0.45 ± 0.05mm

Dielectric Strength Member

Steel Wire Ø 1.2 ± 0.05mm

Outer Jacket

LSZH

Color of Buffer: 1 core Drop Cable

01 Blue

2 core Drop Cable

01 Blue

02 Orange

Transmission Performance: Fiber Types

Maximum Attenuation:

Value

G.652D/G.657A1

@1310nm @1550nm

0.4dB/km 0.3dB/km

Maximum Dispersion

ps/nm/km

≤3.5@1285~1339nm ≤18@1550nm

Cutoff Wavelength

<1260

Mode Field Diameter

μm

9.2 ± 0.5@1310nm 10.5 ± 0.8@1550nm

Core Clad Concentricity

μm

≤0.5

Cladding Diameter

μm

125 ± 1

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC5rev1

2/3

Opterna Opterna R

Fiber Optic Outdoor Drop Cable OSP Solutions Mechanical & Environmental:

Temperature Range

-40⁰C to +60⁰C

Fire Performance

IEC 60332-1, IEC 60754-2 & IEC 61034

Cable Properties: Sheath Color

Black

Fiber Count

1 or 2

Nominal Diameter [mm]

2.0×3.0 ± 0.2mm

Nominal Weight [Kg/Km]

15.6

Maximum Tensile Load

Minimum Bend Radius

Short Term [N]

Long Term [N]

Loaded [mm]

Installed [mm]

652D

657A

652D

600

300

Crush Resistance

657A

Short Term [N]

Long Term [N]

1000

500

Ordering Info:

FC-XXX-DRP-SW-YYY-LZ

Fiber Optic Singlemode Outdoor Drop Cable, LSZH

FC-XXX-DRP-SW-YYY-PV

Fiber Optic Singlemode Outdoor Drop Cable, PVC

XXX : OS1, OS2, 7A1, 7A2, 7B2, 7B3 YYY : 001, 002

Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC5rev1

3/3

Opterna Opterna R

Fiber Optic Patchcords and Pigtails Fiber Interconnect & Passives

Introduction Opterna offers high performance patchcords and pigtails for use in all types of fiber optic networks. The Opterna® patchcords & pigtails are manufactured using state-of-the-art controlled manufacturing processes to operate over a wide range of wavelengths, ranging from 850nm 1300nm for Multimode and 1310nm - 1550nm for Singlemode fiber. Opterna patchcords and pigtails are terminated with high quality connectors, which provide low insertion loss and high return loss. Each patchcord or pigtail is individually tested and supplied with test certificates. The unique serial number provides traceability of every single product.

Features

Patchcords and Pigtails

• Available in singlemode and multimode fiber types • Available with all fiber optic connector types • High quality ferrules and housings • Low insertion loss and high return loss • Individual test results and unique trace number provided with every product • Mating Durability: 1000 cycles; <0.2 dB change • Temperature range: -40 °C to +70°C • RoHS compliant • IEC, EIA/TIA and GR-326-CORE compliant

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSCArev1

1/4

Opterna Opterna R

Patchcords and Pigtails Fiber Interconnect & Passives Applications: • Datacenter and Datacom • FTTX deployments • Pre-terminated assembly interconnection • CATV, WAN, LAN and Telecom networks • Testing and measurement equipment

Size & Dimensions: Chan. 1

Chan. 2 End 1

End 2 Chan. 1

Chan. 2

Fig.1: Duplex patchcord schematic End 2

End 1

l 2 L

Fig.2: Simplex patchcord schematic

l 2 L

Fig.3: Pigtail schematic

Length of assembly (L)

L -0/+100mm (for L<0.5.m) L -0/+150mm (for 0.5m>L<5m) L -0/+200mm (for L>5m)

Americas: (703) 653-1130 sales.us@opterna.com

Split length (l1) - only for duplex

150 ± 25mm

Traceability label distance (l2)

200 ± 25mm (from one end)

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSCArev1

2/4

Opterna Opterna R

Patchcords and Pigtails Fiber Interconnect & Passives

General Specification:

Parameter Fiber Types

Specification Multimode: OM1, OM2, OM3, OM4 Singlemode: G652D, G657A1, G657A2, G657B2, G657B3, G655 Simplex: 2.8, 2.0, 1.8, 0.9, 0.6, 0.250mm Duplex: 2.8, 2.0, 1.8mm Flat duplex: 2.8mm Blue, Yellow, White, Orange, Aqua, Heather Violet SC, LC, MU, FC, ST, MTRJ, ESCON, E-2000, SMA, FDDI

Cable type

Cable Colours Connector Types Endface Finish

PC, UPC, APC

Optical performance specification:

Parameter Insertion loss (dB)

Return Loss (dB)

Americas: (703) 653-1130 sales.us@opterna.com

Connector Type Multimode SC, LC, MU, FC, ST, E-2000, ESCON, FDDI Multimode MTRJ & SMA Singlemode SC, LC, MU, FC, ST, ESCON, FDDI E2000 MTRJ All types Singlemode UPC endface finish type All types Singlemode APC endface finish type

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Max 0.30 0.75 0.30 0.25 0.50 50 60

Typical 0.20 0.50 0.20 0.12 0.30 55 65

Visit: Opterna.com DSCArev1

3/4

Opterna Opterna R

Patchcords and Pigtails Fiber Interconnect & Passives Ordering Info: CA Connector Type End 1

Connector Cable Finish Diameter End 1

Fiber Type

Cable Type

Cable Material

Connector Type End 2

Connector Cable Finish Length End 2

Cable Colour

ST connector

1.6mm

OM1

62.5/125 MM

Simplex

LSZH

ST connector

005

0.5 meter

Blue

SC connector

UPC

1.8mm

OM2

50/125 MM

Duplex

PVC

SC connector

UPC

015

1.5 meter

Yellow

SC duplex

APC

2.0mm

OM3

50/125 MM Laser Optimized

Flat Duplex

RISER

SC duplex

APC

150

15 meter

White

FC connector

2.8mm

OM4

50/125 MM Laser Optimized

Tight Buffered

PLENUM

FC connector

Orange

LC connector

250um

OS2

9/125 SM G.652D

Easy strip

LC connector

Aqua

LC duplex

600um

7A1

G-657A1 SM Bend insensitive

Loose tube

LC duplex

Heather Violet

MU connector

900um

7A2

G-657A2 SM Bend insensitive

MU connector

MU duplex

7B2

G-657B2 SM Bend insensitive

MU duplex

E-2000 connector

7B3

G-657B3 SM Bend insensitive

E-2000 connector

MTRJ connector

655

9/125 SM G-655

MTRJ connector

FDDI connector

ESCON connector

SMA connector

Blank for pigtail

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSCArev1

4/4

Opterna Opterna R

Fused 1x2 (2 x2) Splitters OSP Solutions Introduction Opterna High Performance Bidirectional Single Mode Splitters are used to split light from one fiber into two output fiber lines with ultra low loss. It also can be used to combine light from two fibers into one. It is a compact, fused, all fiber technology device. Manufactured using state-of-the-art Fused Bi-conical Taper process (FBT), they exhibit uniform performance over entire optical spectrum from 1260 to 1600nm with near zero loss. The epoxyfree optical path provides good power handling capability. Opterna fused splitter uses highly reliable and specialized packaging technology, providing excellet thermal stability and long life. The advanced packing ensures very good stability under vibration and impact, making these splitters ideal for outdoor applications. Opterna splitters are available in both 1x2 and 2x2 configuration with different package and connector types to cater most applications.

Fused 1x2 (2 x2) Splitters

Features:

• All fiber technology • Bidirectional • Triple Play • Ultra broadband 1260 ~ 1600nm • Extreme stability to thermal variations • Tap coupler versions of any split ratio • Near Zero Excess Loss • Low Back Reflection • Low Polarization Dependant Loss • Excellent Uniformity • Compact Packaging • Designed to comply GR-1209-CORE and GR-1221-CORE • 100% rigorous screening (rapid temperature cycling) and testing • Variety of package and pigtail options • Factory connectorization available • Custom Packaging available

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSCP1rev1

1/3

Opterna Opterna R

Fused 1x2 (2 x2) Splitters OSP Solutions Applications: • FTTX • Telecommunication Networks • CATV Networks • Fiber Optic Sensors • Optical Fiber Communication Systems Specifications Parameter

Narrow Band single Window

Wide Band single Window

Narrow Band single Window

Wide Band single Window

Operating Wavelength

1310±20nm or 1550±20nm or 1585±20nm

1310±40nm or 1550±40nm or 15301610nm (for DWDM)

1310±20nm and 1550±20nm

1310&1550(±40nm) or 1260- 1360 & 14801580nm

Grade Excess Loss : Typical

Premium

Standard

Premium

Standard

Premium

Standard

Premium

Standard

0.1 dB

0.2 dB

0.1 dB

0.2 dB

0.1 dB

0.2 dB

0.1 dB

0.2 dB

Insertion Loss : Maximum (Loss of high power port/ Loss of low power port)* 50/50

3.4 dB

3.6 dB

3.4 dB

3.6 dB

3.8 dB

3.6 dB*

3.8 dB*

55/45

3.0/3.9 dB

3.2/ 4.1 dB

3.0/ 3.9 dB

3.2/ 4.1 dB

3.1/ 4.0 dB

3.3/ 4.2 dB

3.2/ 4.1 dB

3.4/ 4.3 dB

60/40

2.5/ 4.4 dB

2.7/ 4.6 dB

2.5/ 4.4 dB

2.7/ 4.6 dB

2.6/ 4.6 dB

2.8/ 4.8 dB

2.7/ 4.7 dB

2.9/ 4.9 dB

65/35

2.1/ 5.1 dB

2.3/ 5.3 dB

2.1/ 5.1 dB

2.3/ 5.3 dB

2.2/ 5.2 dB

2.4/ 5.4 dB

2.3/ 5.3 dB

2.5/ 5.5 dB

70/30

1.8/ 5.6 dB

2.0/ 5.8 dB

1.8/ 5.6 dB

2.0/ 5.8 dB

1.9/ 5.8 dB

2.1/ 6.0 dB

2.0/ 6.0 dB

2.2/ 6.2 dB

75/25

1.7/ 6.5 dB

1.9/ 6.7 dB

1.7/ 6.5 dB

1.9/ 6.7 dB

1.7/ 6.6 dB

1.9/ 6.8 dB

1.8/ 6.8 dB

2.0/ 7.0 dB

80/20

1.2/ 7.5 dB

1.4/ 7.7 dB

1.2/ 7.5 dB

1.4/ 7.7 dB

1.3/ 7.6 dB

1.4/ 7.8 dB

1.3/ 7.8 dB

1.5/ 8.0 dB

1/ 8.8 dB

1.2/ 9.0 dB

85/15

1/ 8.8 dB

1.2/ 9.0 dB

1.0/ 9.0 dB

1.1/ 9.2 dB

1.0/ 9.2 dB

1.2/ 9.4 dB

90/10

0.7/ 10.8 dB 0.8/ 11.0 dB

0.8/ 11.0 dB

0.9/ 11.5 dB

0.8/ 11.1 dB

0.9/ 11.6 dB

0.8/ 11.0 dB

0.9/ 11.5 dB

95/5

0.4/ 13.8 dB 0.5/ 14.0 dB

0.5/ 14.0 dB

0.6/ 14.5 dB

0.5/ 14.2 dB

0.6/ 14.7 dB

0.5/ 14.0 dB

0.6/ 14.2 dB

98/2

0.3/ 18.0 dB 0.3/ 18.5 dB 0.35/18.5dB 0.4/ 19.0 dB 0.35/18.7dB

99/1

0.2/ 21.5 dB 0.3/ 22.0 dB

Uniformity, max (for 50/50)

0.6 dB

0.8 dB

0.4/ 19.2 dB

0.3/ 18.5 dB

0.4/ 18.7 dB

0.3/ 22.1 dB

0.4/ 22.5 dB

0.3/ 22.4 dB

0.4/ 22.8 dB

0.3/ 22.0 dB

0.35/22.3dB

0.6 dB

0.8 dB

0.7 dB

0.8 dB

0.8 dB*

1.0 dB*

PDL max

0.2 dB

Directivity

>50 dB

Operating Temperature

-40 to + 85°C

Fiber Type

G 652D

Dimensions, LD

2.9 mm (dia) x 51 mm (L), bare fiber

,MD

3.05mm (dia) x 65mm (L), 900um hytrel tubing

,HD

Plastic Housing, 96.5mm(I) x 12mm (b) x 10mm (t),mm jacketed cable

*other coupling ratios are also available †All insertion loss are excluding connector loss

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSCP1rev1

2/3

Opterna Opterna R

Fused 1x2 (2 x2) Splitters OSP Solutions Spectral Response Chart Insertion Loss 7 6 5 4 B3 d 2 1 0 1230

1280

1330

1380

1430

1480

1530

1580

1630

Wavelength (nm)

Ordering Info: CP Split Ratio

Grade

Port Configuration

Package Type

Wavelength in nm

Connector Type

Connector Finish

Lead Length

50:50

Premium

1x2 Splitter

Light Duty, 250μm Buffered fiber

13NB

1310 ± 20nm

No Connector

No connector

1m ± 0.1m

55:45

Standard

2x2 Splitter

Medium Duty, 900μm Tubing

15NB

1550 ± 20nm

ST connector

UPC

1.5m ± 0.1m and so on

60:40

Custom Type*

Heavy Duty, 2mm Jacketed

35NB

1310 ± 20 & 1550 ± 20nm

SC connector

APC

For Modular versions

Heavy Duty, 3mm Jacketed

58NB

1585 ± 20nm

FC connector

Aluminium Cassette

13WB

1310 ± 40nm

LC connector

Moulded Plastic Cassette

15WB

1550 ± 40nm

MU connector

Custom Module*

35WB

1310 ± 40 & 1550 ± 40nm

E-2000 connector

LGX Module

NWBB

1260 - 1360 & 1480 - 1580nm

WDBB

1260 - 1360 & 1450 - 1600nm

ULBB

1260 - 1610nm

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSCP1rev1

3/3

Opterna Opterna R

Fused Multimode Splitters Fiber Interconnect & Passives

Introduction Opterna High Performance Bidirectional Multimode Splitters are used to split light from one fiber into two output fiber lines with ultra low loss. It also can be used to combine light from two fibers into one. It is a compact, fused, all fiber technology device. They are manufactured using state-ofthe-art Fused Bi-conical Taper process (FBT) on graded index fibers with core diameters of 50um or 62.5um. Opterna’s Multimode splitters are commonly used in short distance communications with LED sources operating at 1310nm or 850nm. They are wavelength independent over a broad range of wavelengths with uniform modal power distribution launch condition. Opterna’s MM fused splitters use highly reliable and specialized packaging technology, providing excellent thermal stability and long life. Opterna splitters are available in both 1x2 and 2x2 configuration with different package and connector types to cater most applications.

Features

Fused Multimode Splitters

• All fiber technology • Bidirectional • Accurate split ratio • Ultra-low excess loss • Excellent directivity • Available in 50/125, 62.5/125 & OM3 • Tap Ratios available • Extreme stability to thermal variations • Excellent Uniformity • Compact Packaging • Variety of package and pigtail options • Factory connectorization available • Custom Packaging available

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSOMMrev1

1/3

Opterna Opterna R

Fused Multimode Splitters Fiber Interconnect & Passives Applications: • Fiber Optic Sensors • LAN • Short distance transmission • Video Networks • Signal Monitoring • Network Monitoring

Specifications:

Fiber Type

62.5/125μm OR 50/125μm

Operating Wavelength

850 and 1300nm

Split Ratio*

50:50

Maximum Insertion Loss

3.7dB (Without Connector)

Directivity

> 40dB

Operating Temperature Package

Americas: (703) 653-1130 sales.us@opterna.com

-400C to +850C

Light Duty

Stainless steel tube, 3.05mm (dia) x 55mm (L)

Medium Duty

Stainless steel tube, 3.05mm (dia) x 65mm (L)

Heavy Duty

Plastic Housing, 96.5mm (l) x 12mm (b) x 10mm (t)

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSOMMrev1

2/3

Opterna Opterna R

Fused Multimode Splitters Fiber Interconnect & Passives Ordering Info: OMMC Split Ratio

Fiber Type

Port Configuration

Package Type

Wavelength in nm

Connector Type

Lead length

50:50

62.5/125

1x2 Splitter

Light Duty, 250μm Buffered fiber

85NB 850 ± 20nm

No Connector

1m ± 0.1m

55:45

50/125

2x2 Splitter

Medium Duty, 900μm Tubing

13NB 1300 ± 20nm

ST Connector

1.5m ± 0.1m and so on

60:40 & so on

OM3

Heavy Duty, 2mm Jacketed

1385

1310 ± 20 & 850 ± 20nm

SC Connector

For Modular versions

Heavy Duty, 3mm Jacketed

Aqua

FC Connector

Aluminium Cassette

Heather violet LC

LC Connector

Moulded Plastic Cassette

Black

Custom*

Metal

LGX Module

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSADrev1

3/3

Opterna Opterna R

Fused Wideband Tap Couplers OSP Solutions Introduction Opterna High Performance Tap Couplers are used to tap light from a fiber line, to monitor the signals. It is used in Erbium doped fiber amplifiers (EDFA) and telecommunication networks for monitoring the signal strength of different channels. Manufactured using state-of the- art Fused Bi-conical Taper process (FBT), they exhibit uniform performance over entire optical spectrum from 1260 to 1600nm with near zero loss. The epoxyfree optical path provides good power handling capability. Opterna Tap couplers use highly reliable and specialized packaging technology, providing excellent thermal stability and long life. The advanced packing ensures very good stability under vibration and impact, making these splitters ideal for outdoor applications. Opterna tap couplers are available in both 1x2 and 2x2 configuration with different package and connector types to cater most applications.

Features:

Fused Wideband Tap Couplers

• Available with different tap ratios from 1 to 10% • All fiber technology (fused) • Broadband performance • Extreme stability to thermal variations • Tap coupler versions of any split ratio • Near Zero Excess Loss • Low Back Reflection • Low Polarization Dependant Loss • Compact Packaging • Designed to comply GR-1209-CORE and GR-1221-CORE • 100% rigorous screening (rapid temperature cycling) and testing • Variety of package and pigtail options • Factory connectorization available

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSCP2rev1

1/3

Opterna Opterna R

Fused Wideband Tap Couplers OSP Solutions Applications: • EDFA signal monitoring • Network channel strength monitoring • FTTx • Telecom & CATV Networks • Fiber Optic Test & Sensing Equipment

Specifications Parameter

Single window /C -Band/ L -Band

Dual Window

C +L B and for DWDM

Operating Wavelength

1530-1570nm or 1570-1610nm or 1310±20nm

1310±20nm and 1550±20nm

1530-1610nm

Grade Excess Loss : Typical

Premium

Standard

Premium

Standard

Premium

Standard

0.1 dB

0.2 dB

0.1 dB

0.2 dB

0.1 dB

0.2 dB

Insertion Loss : Maximum (Loss of high power port/ Loss of low power port)* 90/10

0.7/ 10.8 dB

0.8/ 11.0 dB

0.9/ 11.5 dB

0.8/ 11.0 dB

0.9/ 11.5 dB

95/5

0.4/ 13.8 dB

0.5/ 14.0 dB

0.6/ 14.5 dB

0.5/ 14.0 dB

0.6/ 14.2 dB

98/2

0.3/ 18.0 dB

0.3/18.5 dB

0.35/ 18.5 dB

0.4/ 19.0 dB

0.3/18.5 dB

0.4/18.7 dB

99/1

0.2/ 21.5 dB

0.3/ 22.0 dB

0.3/ 22.1 dB

0.4/ 22.5 dB

0.3/ 22.0 dB

0.35/ 22.3 dB

Max Loss Variation in the tap leg 90/10

0.3 dB

0.5 dB

0.7 dB

0.5 dB

0.7 dB

95/5

0.4 dB

0.6 dB

0.8 dB

0.6 dB

0.8 dB

98/2

0.4 dB

0.6 dB

0.8 dB

0.6 dB

0.8 dB

99/1

0.4 dB

0.6 dB

0.8 dB

0.6 dB

0.8 dB

PDL max

0.2 dB

Directivity

>³55 dB

Reflectance

-60 dB for Premium grade (<-55dB for Standard Grade)

Operating Temperature

-40 to +85 °C

Storage Temperature

-40 to +70 °C

Fiber Type

SMF-28 or SMF-28e

Dimensions, LD

2.9mm (dia) x 51mm (L)

,MD

3.05mm (dia) x 65mm (L)

,HD

Plastic Housing, 96.5mm (l) x 12mm (b) x 10mm (t)

†All insertion loss are excluding connector loss

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSCP2rev1

2/3

Opterna Opterna R

Fused Wideband Tap Couplers OSP Solutions Spectral Response Chart Insertion Loss: 99/1 Tap Coupler

T a p

P o r t

1 0.8

0.6 0.4

0.2

I L

-0.2

1530

1540

1550

W avelength (nm)

1560 Tap Port

H i g P h o r P t

o w I e L r

1570 High Power Port

Ordering Info: CP Coupling Ratio

Grade

Port Configuration

Package Type

Wavelength in nm

Connector Type

Connector Finish

Lead Length

90:10

Premium

1x2 Splitter

Light Duty, 250μm Buffered fiber

13NB

1310 ± 20nm

No Connector

No connector

1m ± 0.1m

95:05

Standard

2x2 Splitter

Medium Duty, 900μm Tubing

15NB

1550 ± 20nm

ST connector

UPC

1.5m ± 0.1m and so on

99:01

Custom Type*

Heavy Duty, 2mm Jacketed

35NB

1310 ± 20 & 1550 ± 20nm

SC connector

APC

For Modular versions

Heavy Duty, 3mm Jacketed

13WB

1310 ± 40nm

FC connector

Aluminium Cassette

15WB

1550 ± 40nm

LC connector

Moulded Plastic Cassette

35WB

1310 ± 40 & 1550 ± 40nm

MU connector

Custom Module*

E-2000 connector

LGX Module

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSCP2rev1

3/3

Opterna Opterna R

Mode Conditioning Patchcords Fiber Interconnect & Passives

Introduction Opterna Mode Conditioning Patchcord (MCP) is designed for long wave (LX) multimode applications of Gigabit Ethernet. It is compliant with the IEEE 802.3z application standard. The purpose of Mode Conditioning Patchcord is to condition the launch to ensure specified link lengths and it should be inserted on both ends of a link to interface between a single mode adapter card and a multimode cable plant. They are used to minimize Differential Mode Delay (DMD) which can occur when a singlemode laser source is launched into the center of a multimode fiber. The most common use for MCP is long wave Gigabit Ethernet applications (1000BASE-LX) in which a 1310nm single mode transceiver is being deployed into an existing multimode fiber plant. Opterna MCP uses the most reliable offset method that launches laser source away from the center of the multimode fiber. This ensures effective bandwidth for the system, closer to that measured by overfilled launch method. Opterna MCP assembly offers the same reliability of a standard patchcord. They are available in all connector styles with 2.5 or 1.25mm ferrules and common multimode fiber types (50 & 62.5ìm).

Features

Mode Conditioning Patchcords

• Designed for 1000BASE-LX Transmitters (GbE) • Available in 50/125 and 62.5/125 fiber options • Fully compliant with IEEE 802.3z • Eliminates differential mode delay • Available in all connector options • Compact and reliable packaging • Uses offset method to ensure reliability and are 100% tested for Coupled Power Ratio (CPR) • Individual test sheet with IL & CPR and unique product identification number for traceability • RoHS compliant • Low Insertion Loss & Back Reflection

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSMCrev1

1/3

Opterna Opterna R

Mode Conditioning Patchcords Fiber Interconnect & Passives Applications: • Gigabit Ethernet 1000BASE-LX over multimode cable

Specifications: Parameter Description Operating wavelength Maximum Insertion loss Coupled Power Ratio (CPR) Return Loss (RL) SM channel MM channel Offset between SMF and MMF Connector finish

Specification 62.5 μm MMF

28<CPR<40 dB

17<Offset<23 μm 10<Offset<16 μm UPC (RL>50dB) or APC (RL> 60dB)

Radius of Curvature Apex offset Fiber height Maximum Angular Offset Connector options Operating temperature

Europe: +44(0)2031 301 716 sales.eu@opterna.com

28<CPR<40 dB >30 dB >20 dB

Ferrule Geometry

Americas: (703) 653-1130 sales.us@opterna.com

50 μm MMF 1310 nm 0.4 dB

Middle East: +971 4 299 7676 sales.me@opterna.com

10 to 25mm ≤ 50μm -50 ≤ Ht < 50nm 1 Degree SC, ST, FC, LC, MU, E -2000, MTRJ -40 to + 80°C

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSMCrev1

2/3

Opterna Opterna R

Mode Conditioning Patchcords Fiber Interconnect & Passives

Ordering Info: MC Fiber Type

ConnectorCable Plant End

Cable Type

Equipment EndMM Leg

Equipment EndSM Leg

Connector Finish (SM leg)

Equipment End Connector Configuration

Length

62 62.5/125 ST MM

ST 16 1.6mm connector duplex

ST connector

ST U UPC connector

Simplex

015

1.5 meter

50 50/125 MM

SC 18 1.8mm connector duplex

SC connector

SC A connector

Duplex

105

SC duplex

20 2.0mm duplex

FC connector

FC 28 2.8mm connector duplex

LC connector

MU connector

LC duplex

E-2000 connector

MU connector

MTRJ connector

APC

Not applicable (blank)

10.5 meter

If MTRJ (blank)

MD MU duplex E2

E-2000 connector

MTRJ connector

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSMCrev1

3/3

Opterna Opterna R

MT Modular Cassettes & Adapter Plates OSP Solutions

Introduction The Opterna® pre-terminated MT cassettes are ideally suited for high density backbone and building entry interconnect applications in data and telecom environments. Manufactured in our state-of-the-art facilities, they offer rapid deployment, high density and maximum space utilization combined with significant time and cost savings. The Opterna MT modular product line is easy to install, upgrade and re-work without affecting the existing connections, which makes it perfect for pay-as-you-grow scenarios. In addition Opterna also offers a wide range of pass through modular adapter plates for patching and managing pre-terminated fiber optic cables, factory populated with all standard types of adapters.

Features

Data Center Conectivity MT Modular Cassettes and Adapter Plates

• All modules are LGX compatible • Available in all fiber types - SM and MM • 100 % factory terminated and tested - saves times and guarantees high performance • Up to 24 FO connections in one LGX cassette • Polarity A (standard), B or C • Optimized performance using only highest quality connectivity components • 40 & 100G ready • Highest quality MT connectivity - MTP® and MTP Elite® connectors

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODCCrev1

1/4

Opterna Opterna R

MT Modular Cassettes & Adapter Plates OSP Solutions

Applications: • Data center and telecommunication networks • High density connection between active equipment and distribution architectures • Gigabit Ethernet, Local Area Networks, Wide Area Networks, Storage Area Networks • Backbone links for CATV and video transmission

Parameter Rear connectors Front connectors Number of rear connectors Number of front connectors Fiber types Cassette dimensions (HxWxD) mm Packed dimensions (HxWxD) mm Cassette material Cassette color Cassette material

Connector type MTP Elite (MM) MTP (MM) LC/ SC (MM) MTP Elite (SM) MTP (SM) LC/ SC (SM)

Americas: (703) 653-1130 sales.us@opterna.com

Average IL (dB) MTP or MTP Elite (MPO on request) SC, LC (Others on request) 1 or 2 Up to 12 SC or 24 LC connections G652D, OM3, OM4 (Others on request) 30 x 129 x 132 50 x 150 x 200 Cold rolled steel, powder coated Black RAL 9005, available in RAL 7032 and RAL 7035 (Gray) on request TIA-604-5, IEC 61754-4, IEC-61754-7, IEC 61754-20, EN50377-15-1, ISO/IEC 11801, TIA/EIA-568-B, EIA/TIA-526-7&14A, RoHS

Average IL (dB)* 0.10 0.20 0.20 0.10 0.25 0.15

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Max IL (dB)* 0.35 0.60 0.30 0.35 0.75 0.30

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Return loss (dB) N/A N/A N/A >60 >60 >50(UPC)/60(APC)

Visit: Opterna.com DSODCCrev1

2/4

Opterna Opterna R

MT Modular Cassettes & Adapter Plates OSP Solutions

Drawing:

104.0

132.0

29.5

128.9

15.1

30.2

6.1

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

.0 R5

117.3

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODCCrev1

3/4

Opterna Opterna R

MT Modular Cassettes & Adapter Plates OSP Solutions

Ordering Info: Ordering information MT modular cassettes: ODCC MT Connector

MT Connector Front Adapter Type Type

Fiber Count

Sleeve Material

Fiber Type

MTP Elite

12F

SC SX

12 12

Metal

OM3 OM3

GN Green

MTP

24F

SC DX

24 24

Zirconia

OM4 OM4

LC DX

LC Quad

AQ Aqua

LC DX internal shutter

LC quad internal shutter

OS2

Adapter color

G652D BG

Metal color BK

Black

Polarity A

Blue

Beige

Other

Heather Violet

Ordering information modular adapter plates: ODCA Adapter Type

Number of Adapters

Sleeve Material

Adapter colour

SC SX

Metal

Green

SC DX

Zirconia

Blue

LC DX

Metal colour BK

Blank plate BG

Beige

LC Quad

Aqua

LC DX internal shutter

Heather Violet

LC quad internal shutter

Blank plate

Black

Blank plate

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODCCrev1

4/4

Opterna Opterna R

MT Modular Patch Panels Central Office Solutions

Introduction

The MT modular patch panels are a part of Opterna’s comprehensive MT modular connectivity system for data centers and other. In order to enable the optimum balance between accessibility and density, a range of 1U and 3U fixed and sliding modular solutions are available. All panels are based on the IEC 60297-3 standard. 1U modular panel: The 1U MT modular patch panel is a cost effective solution for routing and patching array fiber optic cables (MTP/MPO). It has 3 slots for loading pre-terminated modular MT cassettes or adapter plates. When fully loaded this panel offers up to 36 SC, 72 LC or 18 MT connections in 1U. Two options are available - fixed and sliding (drawer type). 3U modular panel: The 3U Chassis has 12 slots and provides a very high density solution. It is ideal in situations where floor and rack space utilization is critical and Moves Adds and Changes (MACS) are limited. Although it is a high density solution, the 3U chassis is designed with finger access in mind, striking the optimum balance between space utilization and access. This chassis enables a maximum of 12 cassettes or adapter plates to be installed, offering up to 144 SC or 288 LC connections in 1U. In order to improve the physical security, a lockable metal cover can be installed. The cover also includes a 1U protected cable management duct.

Data Center Conectivity MT Modular Patch Panels

Features

• Robust and reliable • Uses industry approved 19” design and LGX style modules • Flexible, multi-functional solution for different types of connectivity • High density combined with ease of installation and maintenance • No disturbance of existing connections during installation or re-work • Recessable mounting brackets

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODCPrev1

1/4

Opterna Opterna R

MT Modular Patch Panels Central Office Solutions

Drawings: 435.0

405.0

83.0

200.0

396.0

434.0

31.8

171.0

176.5 132.5

481.0

3U chassis

270.0

444.0

31.8

43.7

465.0

486.0

Fixed Panel

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODCPrev1

2/4

Opterna Opterna R

MT Modular Patch Panels Central Office Solutions

Drawings:

301.5

438.2

31.8

43.0

483.0

Sliding panel

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODCPrev1

3/4

Opterna Opterna R

MT Modular Patch Panels Central Office Solutions

Parameter Net Dimension (HxWxD)mm* Packed Dimension (HxWxD)mm Net Weight (kg)

Specification

1U sliding panel

44x440x270 50x530x330 1.9

44x440x302 50x530x330 3.7

High density 3U panel 133x435x200 160x460x230 4.2

Cover for 3U panel 171x435x83 200 x 460 x 150 1.8

Packed Weight (kg) Number of LGX modules Material Color

2.2 3

4.0 4.5 2.0 3 12 N/A Cold rolled steel, powder coated Black RAL 9005, available in RAL 7032 and RAL 7035 (Gray) on request

Operating temperature °C Compliance

-10 to +60 IEC 60297, RoHS

*excluding mounting brackets

Part Numbers: Part Number ODCPF13BK ODCPS13BK ODCPF312BK ODCPF3CBK ODCPG45BK

Description Fixed 1U MT Modular patch panel for 3 modules, black Sliding 1U MT Modular patch panel for 3 modules, black Fixed 3U High density MT Modular patch panel for 12 modules, black Cover for Fixed 3U High density MT Modular patch panel, black Gland holder for all MT panels (including gland for 4 cables up to 5mm)

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODCPrev1

4/4

Opterna Opterna R

Mt Array Trunk Cable Assemblies™ Central Office Solutions

Introduction The Opterna MT trunk cable assemblies are used for high density backbone cabling in data centers and other environments with high fiber density. Manufactured in our state-of-the-art facilities, they offer rapid deployment, high density and maximum space utilization combined with significant time and cost savings. The Opterna MT trunk cable assemblies are available in a wide range of multimode and single mode fiber types. The compact micro tube cables greatly reduce the total volume of cables and help to optimize the cable management.

Features

Data Center Conectivity MT Array Trunk Cable Assemblies

• Standard fiber counts of 12, 24, 48, 72 and 144 fibers, others available on request • Available in all fiber types - SM and MM • 100 % factory terminated and tested - saves times and guarantees high performance • Standard LSZH outer sheath, PE and OFNP available on request • Standard Polarity A, all other types available on request • Optimized performance using highest quality connectivity components MTP® Standard and MTP® Elite connectors • 40 & 100G ready • 12 or 24 fibers in one compact MT connector

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC5rev1

3/3

Opterna Opterna R

Mt Array Trunk Cable Assemblies™ Central Office Solutions Applications: • Data center and telecommunication networks • High density connection between active equipment and distribution architectures • Gigabit Ethernet, Local Area Networks, Wide Area Networks, Storage Area Networks • Backbone links for CATV and video transmission • High density FTTX applications

Parameter Fiber count Connectors Cable type Fiber types Cable diameter (mm) Cable weight (kg/ km) Bending radius

Specification 12F 24F 48F 72F Female 12 or 24F MTP® or MTP Elite® (MPO on request) Micro fiber indoor cable with micro tube G652D, OM3, OM4 (Others on request) 3.5 4.6* 10.6* 12.6* 12.5 14.6 105 155 20 x cable diameter (10 x cable diameter without load)

Operating temperature °C Compliance

0 to +60 ISO/IEC 60793, ISO/IEC 60794, IEC 60332, TIA-604-5, IEC 61754-7, ISO/IEC 11801, TIA-568-C, EIA/TIA-526-7&14A, RoHS

144F

19.5* 336

* Or over sheathed individual 3.5mm 12F cables

Connector type MTP Elite (MM) MTP (MM) MT P Elite (SM) MTP (SM)

Average IL (dB)* 0.10 0.20 0.10 0.25

Max IL (dB)* 0.35 0.60 0.35 0.75

Return loss (dB) N/A N/A >60 >60

* Per mated pair

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC5rev1

2/3

Opterna Opterna R

Mt Array Trunk Cable Assembliesâ&#x201E;˘ Central Office Solutions

Ordering Info: ODCF

ODCF

Both Sides Connector

MT Connector Type

MTP Elite

MTP

ODCF

Fiber Count Length Excluding Shortest Branch Branches (Equal Length to Total Length If No Branches)

Fiber Type

Polarity

12F female

012

001

1 Meter

0.1 Meter

OM3

24F female

024

010

10 Meters

0.5 Meter

OM4

12F male

048

100

100 Meters

1.0 Meter

OS2

G652D X

24F male

072

No Branches

XXX

Other

144

XXX

Other

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC5rev1

3/3

Opterna Opterna R

MT Fanout Cable Assemblies Central Office Solutions

Introduction The Opterna® MT hydra fanout assemblies are used to connect active equipment directly to high fiber count backbone MT cables and MT cassettes in data centers and other high density environments. Manufactured in our state-of-the-art facilities, they offer rapid deployment, high density and maximum space utilization combined with significant time and cost savings. The Opterna MT fanout cable assemblies are available in a wide range of multimode and singlemode fiber types and connectors. The compact microtube cables greatly reduce the total volume of cables and help to optimize the cable management.

Features

Data Center Conectivity MT Fanout Cable Assemblies

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODCFrev1

1/3

Opterna Opterna R

MT Fanout Cable Assemblies Central Office Solutions Applications: • Data center and telecommunication networks • High density connection between active equipment and distribution architectures • Gigabit Ethernet, Local Area Networks, Wide Area Networks, Storage Area Networks • Backbone links for CATV and video transmission • High density FTTX applications

Parameter MT Connectors Fanout connectors Cable type Fiber types Cable diameter (mm) Cable weight (kg/ km) Bending radius

Specification Female 12 or 24F MTP or MTP Elite (MPO on request) SC or LC, others available on request Microfiber indoor cable with microtube G652D, OM3, OM4 (Others on request) 12F - 3.5 24F - 4.6 12.5 14.6 20 x cable diameter (10 x cable diameter without load)

Operating temperature °C Compliance

Connector type MTP Elite (MM) MTP (MM) LC/ SC (MM) MTP Elite (SM) MTP (SM) LC/ SC (SM)

0 to +60 ISO/IEC 60793, ISO/IEC 60794, IEC 60332, TIA-604-5, IEC 61754-7, IEC 61754-4, IEC 61754-20, ISO/IEC 11801, EIA/TIA-526-7&14A, RoHS

Average IL (dB)* 0.10 0.20 0.20 0.10 0.25 0.15

Max IL (dB)* 0.35 0.60 0.30 0.35 0.75 0.30

Return loss (dB) N/A N/A N/A >60 >60 >55(UPC)/60(APC)

* Per mated pair

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODCFrev1

2/3

Opterna Opterna R

MT Fanout Cable Assemblies Central Office Solutions

Ordering Info: ODCF

ODCF

MT Connector Type

MTP Elite

12F female

SCA

SC/APC SX

010

1 Meter

0.1 Meter

OM3 OM3

Green A

MTP

24F female

SCU

SC/UPC SX

015

1.5 meter

0.5 Meter

OM4 OM4

Blue

12F male

SCP

SC MM SX

150

15 10 meters

1.0 Meter

OS2

G652D

Beige

Other

24F male

LCA

LC/ APC SX

7A1

G657A1

LCU

LC/ UPC SX

7A2

G657A2

Aqua

LCP

LC MM SX

SDA

SC/APC DX

SDU

SC/UPC DX

SDP

SC MM DX

LDA

LC/ APC DX

LDU

LC/ UPC DX

LDP

LC MM DX

Fan-out connector Type (APC /UPC/ PC)

Length excluding Fanout

ODCF

Shortest Branch Length

ODCF

Fiber Type

ODCF

Connector color

Polarity

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODCFrev1

3/3

Opterna Opterna R

Fiber Optic Loose Tube Cable OSP Solutions

Introduction Opterna fiber optic loose tube cable features a central tube design surrounded by glass yarn. This dielectric single jacket central loose tube cable is a UV-stabilized and fully water blocked cable for outdoor duct applications (PE outer jacket) or Indoor/Outdoor applications (LSZH outer jacket). The loose tube design provides stable and highly reliable transmission parameters for a variety of voice, data, video and imaging applications.

All Dielectric Single Jacketed Central Tube

Features:

Optical Fiber Filling Compound

• Central loose tube construction

Loose Buﬀer tubes

• Lightweight

Glass Yarns Ripcord

• Compact design for limited conduit space

Outer Jacket

• Each fiber is color coded for easy identification

12-Fiber Cable Optical Fiber Filling Compound

• Glass yarns for limited rodent protection

Loose Buﬀer tubes

• LSZH jacket for Indoor/outdoor applications

Glass Yarns Ripcord

• RoHS compliant

Outer Jacket 24-Fiber Cable

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC4rev1

1/3

Opterna Opterna R

Fiber Optic Loose Tube Cable OSP Solutions Applications: • Building Interconnections (Campus LAN) Standards: • Telcordia GR-20-CORE • IEC 60793 / IEC 60794 • ITU-T G.652.D Options:

• Fiber - Singlemode OS2 - G.652.D, 62.5μm (OM1), 50μm (OM2,OM3 & OM4) multimode available • Outer jacket : Black UV- and moisture-resistant Polyethylene or LSZH (Low Smoke Zero Halogen) Color of Buffer: 01 - Blue

07 - Red

13 - Blue / Single dot marking

19 - Red / Single dot marking

02 - Orange

08 - Black

14 - Orange / Single dot marking

20 - Natural

03 - Green

09 - Yellow

15 - Green / Single dot marking

21 - Yellow / Single dot marking

04 - Brown

10 - Violet

16 - Brown / Single dot marking

22 - Violet / Single dot marking

05 - Slate

11 - Rose

17 - Slate / Single dot marking

23 - Rose / Single dot marking

06 - White

12 - Aqua

18 - White / Single dot marking

24 - Aqua / Single dot marking

Transmission Performance:

Optical Fiber

62.5/125 μm OM1 (850/1300)

50/125 μm OM2 (850/1300)

50/125 μm OM3 (850/1300)

50/125 μm OM4 (850/1300)

9/125 μm OS2 (1310/1550)

3.5/1.0

3.0/1.0

0.40/0.30

200/500

500/500

1500/500

3500/500

10Gbps

300

550

1Gbps

275/550

550/550

Attenuation (dB/km) Typical values Minimum Bandwidth (MHz •km) Ethernet Link Distance (m)

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC4rev1

2/3

Opterna Opterna R

Fiber Optic Loose Tube Cable OSP Solutions Mechanical Characteristics: Storage Temperature : -40 to + 75째C / Operating Temperature : -20 to + 70째C Fiber Count

Nominal Diameter

Nominal Weight

Maximum Tensile Load

Crush Load

[mm]

[kg/km]

[N]

[N/cm]

6.3

1600

800

6.3

1600

6.3

Short Term Long Term Short Term Long Term

Minimum Bend Radius Loaded

Installed

[N/cm]

[mm]

200

100

130

800

200

100

130

1600

800

200

100

130

1600

800

200

100

130

6.3

1600

800

200

100

130

6.8

1600

800

200

100

140

6.8

1600

800

200

100

140

6.8

1600

800

200

100

140

Ordering Info:

FC-XXX-CLT-GA-YYY-LZ

Fiber Optic Single Jacket Central Loose Tube, glass yarn, LSZH jacket

FC-XXX-CLT-GA-YYY-PE

Fiber Optic Single Jacket Central Loose Tube, glass yarn, PE jacket

FC-XXX-CLT-GA-YYY-NR

Fiber Optic Single Jacket Central Loose Tube, glass yarn, riser rated jacket

FC-XXX-CLT-GA-YYY-NP

Fiber Optic Single Jacket Central Loose Tube, glass yarn, plenum rated jacket

XXX : OS1, OS2, OM1, OM2, OM3, OM4 YYY : Number Of cores

Shipping Information:

Standard Reel Length

4000m

*Other Cable lengths may be available upon request

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC4rev1

3/3

Opterna Opterna R

ODB Series 100 OSP Solutions Introduction Opterna’s Optical Distribution Box (ODB) Series 100 is a robust outdoor-rated enclosure designed for FTTH networks in single dwelling, multi-dwelling and multitenant applications, where it serves as a distribution box for up to 8 subscribers. Available in two sizes, the ODB 100 features an internal swing panel with a rear splice area that accommodates PLC splitters, splices and excess fiber storage. The front face of the swing panel holds SC duplex or LC quad connector adaptors. The ODB 100 can be securely mounted to a surface with 4 screws, accessible only when the cover is open.

Features

Robust Outdoor-rated Enclosure

• Indoor and outdoor applications, IP 55 rated • Compact and light, made of UV resistant polycarbonate • Swing panel design for easy installation and maintenance • Integrated holder for one PLC splitter • Integrated splice tray and fiber management • Distribution cables can be pre-terminated or spliced to pigtails • Lock with protective cap • Connectivity compliance: IEC 61754-4, IEC 61754-20, GR-326 CORE

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODB1rev1

1/2

Opterna Opterna R

ODB Series 100 OSP Solutions Applications: â&#x20AC;˘ FTTH networks serving single dwelling, multi-dwelling and multi-tenant buildings â&#x20AC;˘ Wall, pole or pedestal mount

Specifications: Parameter

Unit

1A enclosure

1B enclosure

Dimensions (HxWxD) Input Cable ports Output cable ports Number of adapters Splitter capacity Splice capacity Water and dust resistance Impact resistance Operating temperature

in. mm -

8.1 x 6.3 x 3.6 8.1 x 7.9 x 3.6 206 x 160 x 91 206 x 200 x 91 1 PG13.5 (5 to 9mm dia.) 2 PG16 (10 to 14mm dia.) 8 (2 to 7mm dia.) 8 (2 to 7mm dia.) 2 SC duplex or LC quad 4 SC duplex or LC quad 1 2 10 12 IEC 60529 (IPX5, IP5X) IEC 62262 (IK08) -20 to +65

Color

RAL-7016 (Anthracite Grey)

Ordering Info:

Enclosure

Type

Adapter Quantity

Adapter Type

Termination

Color AG

ODB1A

1A enclosure

none

ODB1B

1B enclosure

one

SC Duplex

APC

two

LC Quad

UPC

three

four

Note: Maximum of 2 Adapters in 1A enclosure. Splitters, pigtails and additional splice trays are sold separately. Contact Opterna for details. Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSODB1rev1

2/2

Opterna Opterna R

PLC Splitters Central Office Solutions

Introduction Opterna’s Planar Lightwave Circuits (PLC) splitters are manufactured using silica glass waveguide circuits and extremely precise alignment of optic fibers in very small package. They split or combine light from one or two incoming fibres to multiple numbers of outgoing fibers. They perform uniformly over a wide spectral range, with ultra-low losses. Opterna splitters are highly compact, reliable and available in very wide range of fiber and connector types. All Opterna PLC splitters are fully compliant with the Telcordia GR-1209 & GR-1221 standard.

Features

PLC Splitters

• Low insertion losses • Ultra-broadband performance (1250-1650nm) • Low Polarization Dependant Loses (PDL) and Polarization Mode Dispersion (PMD) • 1 or 2 input channels and up to 64 output channels • Ultra small, suitable for all applications • Available with all type of packages and connectors

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSPLCrev1

1/4

Opterna Opterna R

PLC Splitters Central Office Solutions Applications: • FTTx networks • Optical CATV networks • CWDM and DWDM systems • Key element of all PON networks • LAN and Telecom networks

Specifications: Parameter

Unit

1xN

Insertion Loss

Max.

dB.

1x2 3.8

Channel Uniformity

Max.

dB.

0.6

0.5

1.4

1.6

2.5

Polarization Dependent Loss

Max.

dB.

0.2

0.3

Wavelength Dependent Loss Temperature Dependent Loss

Max. Max.

dB. dB.

0.3 0.5

Connector Dependent Loss

Max.

dB.

0.2

Min.-Max.

1250 ~ 1650

Return Loss

Min.

dB.

Directivity

Min.

dB.

Operating Temperature

°C

-40 ~ + 85

Storage Temperature

°C

-40 ~ + 85

500

Meter

1.0 meter or customized

Operating Wavelength

Maximum Input Power

Max.

Fiber Type

1x8 10.4

1 x 16 13.9

1 x 32 17.2

1 x 64 22.0

ITU G.652D or G.657A

Fiber Length Connector Type Package Dimension (L x W x H)

Americas: (703) 653-1130 sales.us@opterna.com

1x4 7.0

Customized (SC, SC/APC, LC, LC/APC)

Bare Fiber (250 μm) Integrated Package (900μm) Cassette

Europe: +44(0)2031 301 716 sales.eu@opterna.com

40x4x4

55x7x4

60x12x4

55x7x4

55x12x4

80x23x4.5 120x43x4.5

100x80x10 100x80x10 100x80x10 100x80x10 100x80x10 100x80x20

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSPLCrev1

2/4

Opterna Opterna R

PLC Splitters Central Office Solutions

Specifications: Parameter

Unit

2xN

Insertion Loss

Max.

dB.

2x2 4.0

Channel Uniformity

Max.

dB.

0.8

1.0

1.5

1.8

3.0

Polarization Dependent Loss

Max.

dB.

0.2

0.3

0.4

Wavelength Dependent Loss Temperature Dependent Loss

Max. Max.

dB. dB.

0.3 0.5

Connector Dependent Loss

Max.

dB.

0.2

Operating Wavelength

2x4 7.3

2x8 10.7

2 x 16 14

2 x 32 17.5

2 x 64 22.5

Min.-Max.

1250 ~ 1650

Return Loss

Min.

dB.

Directivity

Min.

dB.

Operating Temperature

°C

-40 ~ + 85

Storage Temperature

°C

-40 ~ + 85

Maximum Input Power

Max.

Fiber Type

500

ITU G.652D or G.657A

Fiber Length

Meter

Connector Type Package Dimension (L x W x H)

1.0 meter or customized

Customized (SC, SC/APC, LC, LC/APC)

Bare Fiber (250 μm) Integrated Package (900μm) Cassette

50x4x4

55x7x4

65x7x4

75x12x4

55x7x4

65x12x4

80x23x4.5 120x43x4.5

100x80x10 100x80x10 100x80x10 100x80x10 100x80x10 100x80x20

Telcordia 1209 & 1221 Test results: Name of the test

Condition

Duration

Temperature- Humidity aging Vibration

85°C and 85% RH 10 - 55Hz, 1.52mm double amplitude, in three axes

7 days 1 hour

Component Impact Test

Impact of 500g (mass<=0.125kg), 1ms , half sine pulse

2 impacts

Temperature Cycling Test

-40°C to + 70°C , Ramp rate: 1°C /min, Dwell time >15min

10 cycles

Temperature- Humidity cycling

14 days

Water Immersion

-40°C to + 85°C , between 10°C and 23°C - 85% RH, at 85°C -20%RH, between 23°C and 85°C - maintain a linear change in RH, below 10°C - uncontrolled RH 43 ± 2°C , PH 5.5 ± 0.5

Fiber Side Pull test

0.23 kg load, 90° angle , 2 directions

5 seconds

Fiber Side Pull test

0.45 Kg load for Single Input Fiber , 1.5 Kg load for 8 Fiber Ribbon Outputs

5 seconds

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

7 days

Visit: Opterna.com DSPLCrev1

3/4

Opterna Opterna R

PLC Splitters Central Office Solutions Ordering Info: PLC

PLC

Split Ratio

Package Type

PLC

Input connector Type

PLC

Output Connector Type

PLC

Input Fiber Type

PLC

Output Fiber Type

PLC

Input Fiber Type

PLC

Output Fiber Type

Fiber Type

102

MTP Elite

Integrated

SCU

SC/UPC

SCU

250

0.5m

OS2

G652D fiber

104

1x2 Splitter

Plastic case 100x45x10mm

SCA

SC/APC

SCA

900 μm

1.0m

7A1

G657A1 fiber

108

1x4 Splitter

Plastic case 100x80x10mm

LCU

LC/UPC

LCU

LC/UPC

2 mm LSZH

5.0m

7A2

G657A2 fiber

116

1x16 Splitter

Bare fiber splitter

LCA

LC/APC

LCA

LC/APC

Custom

μm ribbon

132

1x32 Splitter

FDH PLC module

FCU

FC/UPC

FCU

FC/UPC

Custom

164

1x64 Splitter

For custom type

FCA

FC/APC

FCA

FC/APC

202

2x2 Splitter

204

2x4 Splitter

208

2x8 Splitter

216

2x16 Splitter

232

2x32 Splitter

264

2x64 Splitter

No connector XXX

Custom

No connector XXX

Custom

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSPLCrev1

4/4

Opterna Opterna R

Pre-terminated Fiber Optic Assembly Fiber Interconnect & Passives

Introduction Opterna offers a complete range of pre-terminated multi-fiber assemblies in a variety of cable and connector configurations. Our high-quality factory terminated and tested assemblies are used for simple point to point links or to install a complete fiber optic network. The cabling is fully compatible with all standard cable management accessories and requires no special tools or expertise to install. The cables are fitted with a protective gland to protect the connectors during installation and a special pulling head that is attached to the cable strength member allows the cable to be pulled through ducts without applying load to the terminations. Pre-terminated assemblies can also be customized to cater the customer’s specific performance requirement, application migration plan and installation environment.

Features

Pre-terminated Multi-core Fiber Optic Assembly

• Fiber count up to 48 fibers • Available in Multimode and Singlemode fiber types • Available with indoor and outdoor cable types • Available with all fiber connector types • Fully tested, labeled and documented • Improved link loss budget • Excellent tensile load resistance to facilitate cable pulling through ducts and rails • Pulling sock at pulling end allows easiness to pull cable through race tracks • Easy, quick and cost efficient installation • RoHS compliant • Complies with international telecom standards

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSPTrev1

1/3

Opterna Opterna R

Pre-terminated Fiber Optic Assembly Fiber Interconnect & Passives Applications: • Inter-building and Intra-building backbones for Local Area Network, Data Center, Premise and Campus applications • Data center main, horizontal, zone and equipment distribution area trunk cables for Storage Area Network (SAN) applications

Specifications:

Fiber Count Fiber Types Cable Type

2, 4, 6, 8, 12, 16, 24, 48 OM1, OM2, OM3, OM4, G652D, G657A Tight buffered (indoor) Steel Type Armored (indoor and specific outdoor) Loose Tube (Outdoor application with water resistance Staggered (as in fig. 1 below) or Fan-out (equal branch lengths) SC, FC, ST, LC, MU, E2000 (in UPC & APC finish) M20 X 1.5 (other gland size available) – color: black/ grey

Branch out types Connector Types Specification of gland used for standard assemblies Insertion Loss of each termination

Max: 0.50dB; Typ: 0.30B

Return Loss of each assembly (for Singlemode) Max Tensile Load Packaging

>50dB for UPC >60dB for APC 1500N Coiled and bagged for assemblies < 50m Coiled on a drum for assemblies > 50m

Size & Dimmensions:

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSPTrev1

2/3

Opterna Opterna R

Pre-terminated Fiber Optic Assembly Fiber Interconnect & Passives

Length of Assembly (gland to gland OR free end to gland) – L

L ± 1.0 (m)

Length of shortest branch at pulling end (for staggered assembly) – l₁

30cms (unless specified)

Length of shortest branch at non-pulling end (for staggered assembly)– l₂

30cms (unless specified)

Incremental length between branches (for staggered assembly) – l

l ± 3cms

Ordering Info: PT Connector Pulling End

Connector Finish

Fiber Count

Fiber Type

OM1

Fiber

62.5/125

Cable Type

0.9mm

Cable Jacket

LSZH

Connector - Non Pulling End

Connector Finish

Cable Length (L)

Shortest Branch Length (L1 & L2)*

001

0.3 meter

Black

3.0 meter

Yellow

White

Orange

Aqua

Heather

Tight

Branch Cable Colour

meter

Buffered SC

UPC

simplex SD

OM2

Fiber A

APC

duplex FC

OM3

simplex LD

50/125 MM

OM4

Fiber LC

Loose tube

PVC

Fiber 08

50/125

OM4

2mm Break

Out cable

G652 D

E2000

UPC

010

RISER

10 meter

APC

duplex

100

100 meter

No Connecter

PLENUM

LC simplex

7A1

G657 A1

Fiber

Fiber OS2

simplex

Fiber

duplex

LC duplex

7A2

G657 A2

E2000

MTRJ

Violet

Fiber 24 Fiber MT

MTRJ

48 Fiber

No connector

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSPTrev1

3/3

Opterna Opterna R

WALL MOUNT CABINETS - RECESSED MDU Solutions Introduction Opterna recessed cabinet are the administration and distribution point for voice, fax, data networking, video entertainment, internet access and all other voice / data / video home solutions. This versatile cabinet flush mounts to a wall. The cabinets are designed to hold FTTx equipment comfortably. Opterna recessed cabinets are designed to hold 19” rack mounted equipment and are also available in non 19” formats. The cabinet features a lockable glass door, adjustable front profiles and removable gland plates at the top and bottom. Two different versions are available, fixed design and removable front cover.

Features

Wall Mount Cabinets- Recessed

• Constructed with rigid frames that can be fitted on a wall • Adjustable mounting rails in the front for 19” formats • Top and bottom cable entry facility for easy cable installation • Front section with tempered glass door and lock • Good ventilation and heat dispersion

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSCAB3rev1

1/2

Opterna Opterna R

Wall Mount Cabinet, Single Section MDU Solutions Applications: • Designed for installations that comply with the EN 50173-1, EN 50174-1 & 2,ISO/IEC 11801, ANSI/TIA/EIA-568-C • FTTx Technical Specification: Standard • Comply with mounting dimensions to IEC 297-3 and DIN - 41494 for all equipments Material • SPCC cold rolled steel • Mounting profiles - 1.2mm • Other elements - 1.0 mm • Front door : Tempered glass or Metal Surface Finish • Powder coated

Ordering Info: Part Number

Description

Height (mm)

Width (mm)

Depth (mm)

CAB-RWM-12-600-150-X-G

Recessed Single Section Cabinet, 12U, 600mm (W) x 150mm(D), Glass Door

WMS

CAB-RWM-12-600-300-S-G

Recessed Single Section Cabinet, 12U, 600mm (W) x 300mm(D), Glass Door

WMS

CAB-RWM-600-425-120

Recessed Single Section Cabinet, 600(H) x 425(W) x 120(D)

WMS

X : S - Fixed design, without outer frame D - With removable outer frame Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSCAB3rev1

2/2

Opterna Opterna R

Shuttered SC Patch Cables Central Office Solutions

Introduction Even when using shuttered fiber optic adapters in FTTH deployment there is a risk of accidental exposure to laser light: when the patch cable on the premises side is connected to the wall outlet but unplugged from the active equipment (ONT or ONU) the standard SC patch cables do not offer any protection. The Opterna shuttered SC patch is a unique products developed for FTTH and FTTD application. It has a spring loaded mechanism inside which secures the patch cable immediately after it is disconnected and this way eliminates this treat of exposure to the invisible laser light. Like all the The Opterna patchcords & pigtails the shuttered SC patch cords are manufactured in state-ofthe-art controlled manufacturing processes to operate over a wide range of wavelengths ranging in 1310 and 1550nm windows with guaranteed low loss and reliability. Each patch cord is individually tested and supplied with test certificates. The unique serial number gives provides traceability of every single product and ensures supreme quantity.

Features

Shuttered SC Patch Cables

• Especially designed for FTTH/ FTTD applications at customers’ premises • Product without analogue • High quality connectors with reliable mechanism • Low insertion loss and high Return loss • Individual test results and unique trace number provided with every product • High mating durability • RoHS compliant • Compliant with IEC 61754-4 Standar

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFCSrev1

1/2

Opterna Opterna R

Shuttered SC Patch Cables Central Office Solutions Applications: • FTTH deployments • FTTD deployments

Specifications: Parameter

Specification

Fiber Types

62.5/125 (OM1), 50/125 (OM2), OM3, OM4, G652D, G657A & B

Cable Types

Simplex, 3.0mm

Connector Types

Endface Finish

PC, UPC, APC

Optical Performance Specification: Parameter

Type of connector

Measures

Parameter

Multimode SC

Max: 0.30db; Typical: 0.20dB

Singlemode SC

Max: 0.30db; Typical: 0.20dB

Singlemode UPC endface finish type

Min: 50dB; Typical 55dB

Singlemode APC endface finish type

Min: 55dB; Typical 60dB

Return Loss (Singlemode)

Ordering Info: FCSPC Connector Type Both Ends SC

SC Simplex

FCSPC

Connector Finish Both Ends

FCSPC

Fiber Type

APC

OM2 FC Style

UPC

FCSPC

Cable Length

100

10 meter

Cable Colour

Yellow

OM3 SC Style

White

OM4 ST Style

Orange

OS2

LC Style

Heather Violet

7A1

MU Style

Aqua

7B2

G657B2

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFCSrev1

2/2

Opterna Opterna R

Fiber Optic Shuttered Adapters Fiber Interconnect & Passives

Introduction The Opterna shuttered adapters are designed specially to suit the high safety requirements of the FTTH networks. The shutters are designed to prevent ingress of dust and accidental laser exposure. The spring loaded shutters will remain closed when the connector is unplugged and prevents exposure to laser. All adapters are manufactured in standard colors for identifying UPC and APC end face finishing of the connectors. Opterna fiber optic adapters are manufactured strictly according the international standards, fully compatible with all types of equipment. The Opterna shuttered adapters have the same high quality optical performance as the standard non shuttered ones.

Features

Fiber Optic shuttered Adapters

• High performance UPC and APC adapters • Standard rear side blue and green color • SC Simplex, SC duplex and LC Duplex versions available • White shutter side to suit the color of faceplate • Bottom to top opening of shutter which makes the laser caution label visible to the user • Low insertion loss – under 0.2dB (connector performance dependent) • Return loss >50dB (UPC) and >60dB(APC) • High mating durability (<0.2dB change after 1000 cycles) • Very wide temperature range of using (-40 to +80°C) • RoHS compliant

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSSADrev1

1/3

Opterna Opterna R

Fiber Optic Shuttered Adapters Fiber Interconnect & Passives Applications: • All types of connection interface (ODF, wall mounted solutions etc.) • FTTH deployments • CATV, WAN, LAN and Telecom networks • Testing and measurement equipment

Size and dimensions:

SC Simplex adaptor (all dimensions in mm)

LC Duplex adaptor (all dimensions in mm)

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSSADrev1

2/3

Opterna Opterna R

Fiber Optic Shuttered Adapters Fiber Interconnect & Passives

Ordering Info: SAD Adapter type

End face finish type

Sleeve type

Housing Color

Shutter color

Flanges

With Flanges

Shutter type (for duplex)

Simplex SC

UPC

Zirconia

Blue

Duplex SC

APC

Metal

Green

N Reduced E flanges

Duplex LC

Beige

White

Metal

One shutter Individual shutters

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSSADrev1

3/3

Opterna Opterna R

Fiber Optic Multi Loose Tube Cable OSP Solutions

Introduction Opterna single jacket single armor loose tube fiber optic cable provides stable and highly reliable transmission parameters for a variety of voice, data, video and imaging applications. The cable offers durability and flexibility required for many outside plant uses where added compressive strength, rodent resistance. RoHS (Restriction of the use of Certain Hazardous Substances Directive) Complied.

Single Jacket Single Armor Multi Loose Tube

Features:

Optical Fiber Jelly Compound

• Multi loose tube construction

Loose Buﬀer Tubes Central Strength Member Water Blocking Yarn or Jelly

• Each fiber is color coded for easy identification

Core Wrapping Tape

• Color coded loose tubes for easy identification

Outer Strength Member

• LSZH jacket for Indoor/outdoor applications

Ripcord

Water Blocking Tape Corrugated Steel Tape Armor

72-Fiber Cable

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Outer PE/LSZH Jacket

Visit: Opterna.com DSFC7rev1

1/3

Opterna Opterna R

Fiber Optic Multi Loose Tube Cable OSP Solutions Applications: • Building Interconnections (Campus LAN) • FTTx & Telecommunications Networks

Standards: • Telcordia GR-20-CORE • IEC 60793 / IEC 60794 • IEC 60332-1,3 • IEEE 383 Options:

• Fiber - Singlemode OS2 - G.652.D, 62.5μm (OM1), 50μm (OM2, OM3 & OM4) multimode available

Color of Buffer: 01 - Blue

05 - Slate

09 - Yellow

02 - Orange

06 - White

10 - Violet

03 - Green

07 - Red

11 - Pink

04 - Brown

08 - Black

12 - Aqua

Transmission Performance: Optical Fiber

62.5/125 μm OM1 (850/1300)

50/125 μm OM2 (850/1300)

50/125 μm OM3 (850/1300)

50/125 μm OM4 (850/1300)

9/125 μm OS2 (1310/1550)

3.5/1.0

3.0/1.0

0.40/0.30

200/500

500/500

1500/500

3500/500

10Gbps

300

550

1Gbps

275/550

550/550

Attenuation (dB/km) Typical values Minimum Bandwidth (MHz •km) Ethernet Link Distance (m)

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC7rev1

2/3

Opterna Opterna R

Fiber Optic Multi Loose Tube Cable OSP Solutions Mechanical & Environmental: Storage Temperature : -40 to + 75째C / Operating Temperature : -20 to + 70째C Fiber Count

Nominal Diameter

Nominal Weight

Maximum Tensile Load

Crush Load

[mm]

[kg/km]

[N]

[N/cm]

12.7

157/215

2,700

1000

12.7

157/215

2,700

12.7

157/215

12.7

Short Term Long Term Short Term Long Term

Minimum Bend Radius Loaded

Installed

[N/cm]

[mm]

220

110

254

127

1000

220

110

254

127

2,700

1000

220

110

254

127

157/215

2,700

1000

220

110

254

127

13.2

163/223

2,700

1000

220

110

264

132

13.2

163/223

2,700

1000

220

110

264

132

14.3

190/260

2,700

1000

220

110

286

143

120

15.8

225/308

2,700

1000

220

110

316

158

144

17.2

260/356

2,700

1000

220

110

344

172

228

18.0

279/382

2,700

1000

220

110

360

180

276

19.2

319/437

2,700

1000

220

110

384

192

300

19.9

340/466

2,700

1000

220

110

398

199

*Denotes norminal value for PE / LSZH Jacketed Cable.

Ordering Info:

FC-XXX-MLT-SA-YYY-PE

Fiber Optic Single Jacket Armor Multi Loose Tube, PE jacket

FC-XXX-MLT-SA-YYY-LZ

Fiber Optic Single Jacket Armor Multi Loose Tube, LSZH jacket

XXX : OS1, OS2, 7A1, 7A2, 7B2, 7B3, 655, OM1, OM2, OM3, OM4 YYY : Number of Cores

Shipping Information:

Standard Reel Length

4000m

*Other Cable lengths may be available upon request Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFC7rev1

3/3

Opterna Opterna R

Sliding Fiber Optic Patch Panel OSP Solutions

Introduction The Opterna Fiber Optic 19” Sliding Patch Panel has been designed to facilitate internal fiber management and also to maximize fiber density in 1U, 2U heights. The sliding tray provides easy access to fiber cabling, making this panel ideal for ‘Pay as you Grow’ applications. The mild steel construction and its black or grey powder coated finish makes this panel a high quality solution for any fiber optic installation, including Data Centers, FTTX and Telecommunications. The panel supports 24 way and 48 way configurations in SC Simplex, SC Duplex, ST/FC (D cut out), LC Duplex (SC simplex foot print), LC Quad (SC Duplex foot print). Versions are available with MTP MPO cutouts on the back for use with pre-terminated MTP/MPO trunks.

Features

Sliding Fiber Optic Patch Panel

• Can be installed within standard 19” racks and wall mounted enclosures according to IEC 297-3 specification • The universal design allows using both splice trays with one (central) and with two pins • Rear of panel offers a range of apertures to accommodate a variety of gland configurations • Optimum balance between panel depth and fiber management • The base panel is designed for customized fiber management and splicing solutions • Various anchoring points for incoming cables • Front face of the panel includes a port identification strip • Fiber management kits and splice cassette are offered as accessories • All panels are available pre-loaded with adapters, pigtails and splice accessories

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DASFPrev1

1/5

Opterna Opterna R

Sliding Fiber Optic Patch Panel OSP Solutions

Applications: • Offers solution for optical splicing and patching • Specifically designed for Data Center, communications room and telecommunication applications

Drawing:

415.0

235.2

438.2

465.5

43.5

31.8 43.0

6 7 2

483.0

ITEM NO.

Americas: (703) 653-1130 sales.us@opterna.com

PART NUMBER

QTY.

1SMP-538-1-LID-R3

1SMP-538-2-1U-BRACKET-R3

1SMP-538-10-INNER-ADAPTER-PLATE-24SC-R3

1SMP-538-9-SLIDING-TRAY-24SC-ASSY-R3

NYLATCH

Washer ISO 7089 - 4

ISO 7045 - M4 x 8 - Z --- 8N

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DASFPrev1

2/5

Opterna Opterna R

Sliding Fiber Optic Patch Panel OSP Solutions

Ordering info: Ordering information for panel without MTP/MPO cutouts on the back Part Number

Item Description

FP-SL-SCDX-012-1B

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 24 way 12 SC Duplex cut out, Black color

FP-SL-SCSX-024-1B

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 24 way 24 SC Simplex cut out, Black color

FP-SL-SCDX-024-1B

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 48 way 24 SC Duplex cut out, Black color

FP-SL-SCSX -048-2B

Fiber Optic 19” 2U Unloaded Sliding Patch Panel 48 way 48 SC Simplex cut out, Black color

FP-SL-DCSX-024-1B

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 24way 24 ST/FC Simplex D cut out, Black color

FP-SL-DCSX-048-2B

Fiber Optic 19” 2U Unloaded Sliding Patch Panel 48 way, 48 ST/FC Simplex D cut out, Black color

FP-SL-SCDX-012-1G

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 24 way,12 SC Duplex cut out, Gray color.

FP-SL-SCSX-024-1G

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 24 way, 24 SC Simplex cut out, Gray color

FP-SL-SCDX-024-1G

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 48 way, 24 SC Duplex cut out, Gray color

FP-SL-SCSX-048-2G

Fiber Optic 19” 2U Unloaded Sliding Patch Panel 48 way, 48 SC Simplex cut out, Gray color

FP-SL-SCDX-024-2G

Fiber Optic 19” 2U Unloaded Sliding Patch Panel 48 way, 24 S C Duplex cut out, Gray color

FP-SL-DCSX-024-1G

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 24 way, 24 ST/FC Simplex D cut out, Gray color

FP-SL-DCSX-048-2G

Fiber Optic 19” 2U Unloaded Sliding Patch Panel 48 way, 48 ST/FC Simplex D cut out, Gray color

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DASFPrev1

3/5

Opterna Opterna R

Sliding Fiber Optic Patch Panel OSP Solutions

Ordering info: Ordering information for panel with MTP/MPO cutouts on the back Part Number

Item Description

FP-SL-SCDXM-012-1B

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 24 way 12 SC Duplex cut out, Black color

FP-SL-SCSXM-024-1B

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 24 way 24 SC Simplex cut out, Black color

FP-SL-SCDXM-024-1B

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 48 way 24 SC Duplex cut out, Black color

FP-SL-SCSXM -048-2B

Fiber Optic 19” 2U Unloaded Sliding Patch Panel 48 way 48 SC Simplex cut out, Black color

FP-SL-DCSXM-024-1B

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 24way 24 ST/FC Simplex D cut out, Black color

FP-SL-DCSXM-048-2B

Fiber Optic 19” 2U Unloaded Sliding Patch Panel 48 way, 48 ST/FC Simplex D cut out, Black color

FP-SL-SCDXM-012-1G

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 24 way,12 SC Duplex cut out, Gray color

FP-SL-SCSXM-024-1G

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 24 way, 24 SC Simplex cut out, Gray color

FP-SL-SCDXM-024-1G

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 48 way, 24 SC Duplex cut out, Gray color

FP-SL-SCSXM-048-2G

Fiber Optic 19” 2U Unloaded Sliding Patch Panel 48 way, 48 SC Simplex cut out, Gray color

FP-SL-SCDXM-024-2G

Fiber Optic 19” 2U Unloaded Sliding Patch Panel 48 way, 24 S C Duplex cut out, Gray color

FP-SL-DCSXM-024-1G

Fiber Optic 19” 1U Unloaded Sliding Patch Panel 24 way, 24 ST/FC Simplex D cut out, Gray color

FP-SL-DCSXM-048-2G

Fiber Optic 19” 2U Unloaded Sliding Patch Panel 48 way, 48 ST/FC Simplex D cut out, Gray color

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DASFPrev1

4/5

Opterna Opterna R

Sliding Fiber Optic Patch Panel OSP Solutions

Accessories: Part Number

Item Description

OPFC-STGR24

Universal Opterna Splice Tray for two splice holders, unloaded

OPFC-STGR24-L

Cover for OP-FC-STGR-24

OPFC-STGR24-CH

Holder for 12 metal crimp splice protectors

OPFC-STGR24-SH

Holder for 6 heat shrink splice protectors

OPFC-STGR24-CH

Stacking hinge for OPFC-STGR24

FP-AC-ST-12

12 way Stackable Splice Tray with Splice Holder and cover

FP-AC-ST-24

24 way Stackable Splice Tray with Splice Holder, Clear Cover

FP-AC-SB-24

24 way Splice Bridge with Adhesive Strip and Cover

FP-AC-CG-11B

PG11 (4.5-10mm) Size Cable Gland & Back Nut, Black Nylon LSF material

FP-AC-BC

Bunny Clip

FP-AC-FMK

Fiber Management Kit consists of 1 x FP-AC-SB-24, 1 x FP-AC-CG-11 and 8 x FP-AC-B

FP-AC-BLNK-SCSX

SC Simplex Blank cover

FP-AC-BLNK-SCDX

SC Duplex Blank cover

FP-AC-BLNK-DCSX

ST/FC Simplex Blank cover

PSCL-600-15-30

60mm Clear Fusion Splice Protector Sleeve

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DASFPrev1

5/5

Opterna Opterna R

Telescopic Fiber Patch Panel Central Office Solutions

Introduction

The telescopic fiber optic patch panel offers excellent flexibility during mounting and installation. Mainly used for distribution and splicing of feeder or distribution fiber cables. The patch panel features an improved staggered adaptor design for easy access to the connectors and patch cords during maintenance and fiber patching. A sliding telescopic tray feature is incorporated to facilitate easy access for maintenance and also allows the tray to be released from the patch panel for maintenance. The telescopic patch panel is constructed of high quality steel that makes it study and durable. The panel is powder coated to ensure durability.

Features

Telescopic Fiber Patch Panel

• 1U, 2U, 3U, 4U design • Telescopic tray can be fully ejected for easy splicing • 300mm depth for extra storage • High quality locking system • Angled cable entries to maintain bend radius • Strength member lug for securing the central strength member • Splice tray for terminating incoming fibers to pigtails • Staggered port design for easy patching • Port identification on front panel

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFP3rev1

1/3

Opterna Opterna R

Telescopic Fiber Patch Panel Central Office Solutions

Applications: • LAN/WAN • FTTx • Telecommunications • CATV

Specifications:

Mounting Dimensions

19” according to IEC 297-3 specification

Cable Entry

1U PG 16, 2 Ports 2U PG 16, 2 Ports 3U PG 16, 2 Ports 4U PG 21, 2 Ports

Panel Dimensions

1U – 43 mm(H) x 439 mm(W) x 311.5 mm(D) 2U – 88 mm(H) x 439 mm(W) x 311.5 mm(D) 3U – 132 mm(H) x 439 mm(W) x 311.5 mm(D) 4U – 177 mm(H) x 439 mm(W) x 311.5 mm(D)

Adaptor

SC Duplex, SC Simplex, ST/FC

Sliding Mechanism

Telescopic Rails

Body Construction

1.2mm Steel Sheet

Powder Coated Paint

RAL 7032

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFP3rev1

2/3

Opterna Opterna R

Telescopic Fiber Patch Panel Central Office Solutions

Ordering Info: Part Number

Item Description

FP-SLTR-SCSX-024-1G

Telescopic 24 Way Fiber Patch Panel, 1U 24 SC Simplex cutout

FP-SLTR-SCDX-012-1G

Telescopic 24 Way Fiber Patch Panel, 1U 12 SC Duplex cutout

FP-SLTR-DCSX-024-1G

Telescopic 24 Way Fiber Patch Panel, 1U 24 ST/FC Simplex, D cutout

FP-SLTR-SCSX-048-2G

Telescopic 48 Way Fiber Patch Panel, 2U 48 SC Simplex cutout

FP-SLTR-SCDX-024-2G

Telescopic 48 Way Fiber Patch Panel, 2U 24 SC Duplex cutout

FP-SLTR-DCSX-048-2G

Telescopic 48 Way Fiber Patch Panel, 2U 48 ST/FC Simplex, D cutout

FP-SLTR-SCSX-072-3G

Telescopic 72 Way Fiber Patch Panel, 3U 72 SC Simplex cutout

FP-SLTR-SCDX-036-3G

Telescopic 72 Way Fiber Patch Panel, 3U 36 SC Duplex cutout

FP-SLTR-DCSX-072-3G

Telescopic 72 Way Fiber Patch Panel, 3U 72 ST/FC Simplex cutout

FP-SLTR-SCSX-096-4G

Telescopic 96 Way Fiber Patch Panel, 4U 96 SC Simplex cutout

FP-SLTR-SCDX-048-4G

Telescopic 96 Way Fiber Patch Panel, 4U 48 SC Duplex cutout

FP-SLTR-DCSX-096-4G

Telescopic 96 Way Fiber Patch Panel, 4U 96 ST/FC Simplex cutout

Related Accessories: SP-TR-1224-BK

12 way stackable splice tray with splice holder and Cover, 180 mm (L) x 113 mm (L) x 13 mm (H)

SP-TR-1224-WH

24 way stackable splice tray with splice holder and Cover, 225 mm (L) x108 mm (W) x 13 mm (H)

SP-TR-1224-BL

24 way stackable splice tray with splice holder and Cover, 160 mm (L) x 105 mm (W) x 10 mm (H)

FP-AC-SB-24

24 way Splice Bridge with Adhesive Strip and Cover

FP-AC-CG-11B

PG11 (4.5-10mm) Size Cable Gland & Back Nut, Nylon, Black

FP-AC-CG-16B

PG16 (4.5-10mm) Size Cable Gland & Back Nut, Nylon, Black

FP-AC-BC

Bunny Clip

FP-AC-FMK

Fiber Management Kit consists of 1 x FP-AC-CG-16 and 8 x FP-AC-BC

FP-AC-BLNK-SCSX

SC Simplex Blank Cover

FP-AC-BLNK-SCDX

SC Duplex Blank Cover

FP-AC-BLNK-DCSX

ST/FC Simplex Blank Cover

Americas: (703) 653-1130 sales.us@opterna.com

Europe: +44(0)2031 301 716 sales.eu@opterna.com

Middle East: +971 4 299 7676 sales.me@opterna.com

Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com

Visit: Opterna.com DSFP3rev1

3/3