Opterna Opterna R
R
TurnOpt™ Series 5000 OSP Solutions Introduction The Opterna TurnOpt™ Series 5000 is a Fiber Distribution Hub specially designed for high density FDH topologies. Supporting up to 576 subscribers, the Series 5000 features a lightweight compact enclosure for pedestal mounting and Opterna’s exclusive rotating frame housed within. The Opterna TurnOpt™ Series 5000 is available in two standard configurations - stubbed pre-terminated with OSP feeder and distribution cables and stubless with additional compact partition loaded with splice trays for splicing the feeder and distribution cables. All Opterna TurnOpt™ FDH’s are fully loaded with pigtails, adapters and fiber management accessories. A wide variety of the universal Opterna factory pre-terminated MxN PLC splitters are available to use in the Series 5000 FDH.
Features:
TurnOpt™ Series 5000 High Density FDH
• Up to 576 subscribers in one cabinet • Factory loaded with all connectivity accessories which greatly reduces installation time and cost • Can house 18 plug-and-play PLC splitters • High density and small compact size dimension • The unique TurnOpt™ rotating frame gives full access to side and rear cable management • Smart slack management for the PLC splitter pre-terminated patch leads • Suitable for both Point-to-MultiPoint and Point-to-point architecture using PLC or pass-through modules • Parking adapters available for PLC outputs which are not yet connected • Stubbed and stubless versions available • Available in MTP/MPO terminated version usable with MTP/MPO terminated distribution cables • IP54 rated for outdoor/ indoor applications • Single door design for the stubbed version • Double door design for the stubless version with individual lock for the splicing partition • The outer cabinet can be completely replaced if needed without affecting service • Telcordia GR-3125 compliant
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSAH5rev1
1/3
Opterna Opterna R
R
TurnOpt™ Series 5000 OSP Solutions Applications: • All types of FTTX • Point-to-Point fiber optic networks • Outside plant for all types of telecom networks • Multi Dwelling Units (MDU) with a large number of subscribers
Specifications: No Parameter
Unit Stubbed Version
Stubless Version
mm
1314 x 510 x 400 Pedestal
1520 x 1023 x 490 Pedestal Pre-terminated feeder and distribution side routed to splice trays in additional partition N/A
1 2
Dimensions (H x W x D) Mounting type
3
Configuration
4
Feeder cable
Pre-terminated feeder and distribution side with 10m ready to splice stubs 24F or 48F
5
Distribution cable
288F, 576F or 2x288F
N/A
6
PLC splitter capacity
Up to 18 modules 1:32
Up to 18 modules 1:32
7
Connector types
SC/APC or SC/UPC
SC/APC or SC/UPC
8
Insertion loss Max
dB
0.30
0.30
9
Return loss Max
dB
60.0 for APC, 55.0 for UPC
60.0 for APC, 55.0 for UPC
50 for UPC
50
Cabinet
GR-3125
GR-3125
Connectivity
GR-326
GR-326
RAL-7032
RAL-7032
10 Standard compliances
11 Color
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSAH5rev1
3/3
Opterna Opterna R
R
TurnOpt™ Series 5000 OSP Solutions Ordering Info: AH 5 Feeder Fiber
A
1A
Feeder Cable Connection
S
Splice
Feeder Cable Type
R
closure B
1B None
A
10m
Distribution Side Configuration
S
Outdoor ribbon R
Patch Panel
P
closure 0
Indoor /
Feeder Cable Length
Riser ribbon Outdoor loose
B
20m
B
Riser loose tube
Distribution
C
30m
M
MT
2
None
3 4
Standard pigtail
00
Riser loose
No
00
Splitter
No
Connecter Type
SCA
Splitter
Loose tube
SC / APC
B
20m
01
1 Splitter
01
1X4
SCU
C
30m
02
2 Splitter
02
1X8
XXX
0
None
03
3 Splitters
03
1X16
04
1X32
SC / UPC
Ribbon pigtails
5
(Splice) T
10m
Splitter Type
Custom
pigtails
stub S
A
Splitter Module
tube stub
connectors 0
Riser ribbon
Distribution Stub Length
stub
cable (stubbed)
tube stub M
1
(Stubless)
stub L
Splice trays
Distribution Cable Type
MT
and so on
connectors
Ribbon pigtail
0
(Splice)
No distribution
6
Outdoor loose tube stub
Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSAH5rev1
2/3
Opterna Opterna R
R
Universal Mechnical Splice Central Office Solutions
Introduction Opterna’s universal mechanical splice is an reliable, extremely easy-to-install and effective splice solution for all kinds of fiber optical architectures, including Telecommunications, FTTx, LAN and WAN networks. The solution is indispensable when there is a need for quick repairs and in situations where fusion splicing is un-economical due to the low number of splicing needed in relation to distance, as is often the case in FTTx Networks. Where mechanical splicing really comes to the fore is in situations where fusion splicing cannot be used due to the risk of explosion and other environmental dangers, including petrochemical plants and other areas where the risk of combustion is prominent.
Features
Universal Mechnical Splice
• Quick and easy to install, a splice takes less than 30 seconds once the fiber is stripped and cleaned • No special tools required, installers only need a standard FO toolkit. • One solution for 250 and 900μm, Singlemode and Multimode fiber
L
• Insertion losses are comparable to fusion splicing (typically less than 0.1dB) W
• RoHS and UL-94-V0 compliant • Environmentally friendly, adhesive free solution (V-groove technology) • Reliable and easy to install due to a unique and accurate, fiber centering feature.
lid screw cap
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
jacket
Visit: Opterna.com DSMECrev1
1/2
Opterna Opterna R
R
Universal Mechnical Splice Central Office Solutions Applications: • Optical communication systems • All types of FTTH networks in residential, public and office buildings • Urgent FO networks repairs • Connecting FO cables in areas with high risk of explosion
Specifications:
Standard
Unit
Measures
Dimensions
(LxWxD) mm
40x5x4
Cable type
-
Singlemode and multmode, 250/ 900μm
Insertion loss
dB
Typical ≤ 0.1, Maximum ≤ 0.3
Return loss
dB
>50
Splice method
-
V-groove adhesive free
Operating temperature
°C
-40°C to +80°C
Materials used
-
UL rated plastics and index matching gel
Packaging
-
5 pieces/ pack
Product life
-
Over 25 years
Ordering info Product part number
Product description
OP-FC-MECHSPLICE
Universal mechanical spice for 250/ 900μm
Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSMECrev1
2/2
Opterna Opterna R
R
Wall Mount Cabinet, Single Section OSP Solutions Introduction Opterna single section wall mount cabinet is suitable for applications where security and accessibility is required and floor space is at a premium. The cabinets are designed to hold multiple pieces of voice/data equipment comfortably. Ventilation is provided to allow active equipment to be installed, making it an ideal solution for small LAN’s, retail units and remote sites. Opterna single section wall-mounted enclosures are designed to hold standard 19” rack mounted equipment and patch panels. The cabinet features a lockable glass door, adjustable front profiles and removable entry plates at the top and bottom.
Features
Wall Mount Cabinet, Single Section
• Constructed with rigid frames that can be fitted on a wall • Adjustable mounting rails in the front and rear • Top and bottom cable entry facility for easy cable installation • Includes folded side doors with latch for ease of access • Front section with glass door and lock • Good ventilation and heat dispersion
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSCAB1rev1
1/3
Opterna Opterna R
R
Wall Mount Cabinet, Single Section OSP Solutions Applications: • Designed for installations that comply with the EN 50173-1, EN 50174-1 & 2, ISO/IEC 11801, ANSI/TIA/EIA-568-C
Technical Specification: Standard Comply with mounting dimensions to IEC 297-3 and DIN - 41494 for all equipments • IP 20 Material • SPCC cold rolled steel • Mounting profiles - 1.2mm • Other elements - 1.0mm • Door - Tempered glass Loading Capacity • 60 KG Surface Finish • Powder coated
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSCAB1rev1
2/3
Opterna Opterna R
R
Wall Mount Cabinet, Single Section OSP Solutions Dimension: 80
A
770.05 620.05
A
45
770.05
770.05
770.05 685.05
45
451 466 600
Front (without front door)
40
437 600
Front
391 500
490 600
Side
Back
42
40
307
500
600
TOP
500
495 451
A
40
13 Ø
A
Ordering Information: Part Number
Description
Capacity ‘U’
Width (mm)
Depth (mm)
CAB-WMS-4-600-500
Wall Mount Cabinet, Single Section 4U
4
600
500
CAB-WMS-6-600-500
Wall Mount Cabinet, Single Section 6U
6
600
500
CAB-WMS-9-600-500
Wall Mount Cabinet, Single Section 9U
9
600
500
CAB-WMS-12-600-500
Wall Mount Cabinet, Single Section 12U
12
600
500
CAB-WMS-15-600-500
Wall Mount Cabinet, Single Section 15U
15
600
500
CAB-WMS-18-600-500
Wall Mount Cabinet, Single Section 18U
18
600
500
CAB-WMS-22-600-500
Wall Mount Cabinet, Single Section 22U
22
600
500
CAB-WMS-27-600-500
Wall Mount Cabinet, Single Section 27U
27
600
500
* For 600 depth cabinets replace 500 with 600 * Includes two fans and one 6 Way PDU with universal sockets supporting BS plug or Schuko plugs
Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSCAB1rev1
3/3
Opterna Opterna R
R
Fiber Distribution Box Central Office Solutions
Introduction
The Fiber Distribution Box is suitable for various types of installations and can be used inside buildings or for telemetry applications. The FDB can be installed at every floor in the case of MDU and high rise building or can be installed in SDU to terminate the incoming fiber cable and fiber cable leading to the apartments. The 24/48 port capacity fiber distribution box is designed to provide ample space for fiber optic cable routing, slack management and routing of pigtails and patch cords. The product series are wall-mounted and easy to use and maintain. It is an integral component in the implementation of fiber networks for residential / commercial and utility segments. The fiber distribution box are used in backbone, intermediate and horizontal cross connects, equipment room building entrance, telecommunications closets, IT rooms and customer premise applications. Features
Wall Mount Fiber Distribution Box
• Walled-mounted installation • Suitable for wall mounted in building corridor • Small size, light weight, high capacity, easy to splice and installation • Constructed of cold rolled steel and suitable for indoor application • Two lockable compartments with separate access system • Used for the distribution and connection of fibers, 4 inlets for fibers and 4 outlets for patch cords (One PG13.5 one PG21 at each four corner side of box) • For 24F distribution box, each compartment contains a 24 fiber splice tray with cover • Suitable for termination of 24F/48F incoming fiber cable in the left compartment and drop cables spliced or patch cord mechanical spliced at the right room • For 48F distribution box, each compartment with two 24F fiber splice tray with cover • Removable 12 fiber adaptor plate, suitable for SC/LC simplex or duplex or FC / ST simplex adaptors • Color: Gray • Mounting hardware kit included
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSFDBrev1
1/2
Opterna Opterna R
R
Fiber Distribution Box Central Office Solutions
Applications: • FTTx • Data Communication Network • CCTV
Specifications:
Connector Type
SC, FC, ST, LC
Door
2 with separate lock and key
Body Construction
1.2 mm Steel sheet
Powder Coated Paint
Gray
Enclosure Dimensions
24/48 Port: 530 mm (W) x 355 mm (H) x 80 mm (D)
Ordering Info: FDB
SC
SC cutout
SX
62.5/125
012
12 port
DC
ST/FC cutout
DX
50/125
024
24 port
048
48 port
Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSFDBrev1
2/2
Opterna Opterna R
R
Wall Mount Cabinet Double Section MDU Solutions Introduction Opterna double section wall mount cabinet is suitable for applications where security and accessibility are required and floor space is at a premium. The cabinets are designed to hold multiple pieces of voice/data equipment comfortably. Ventilation is provided to allow active equipment to be installed, making it an ideal solution for small LAN’s, retail units and remote sites. Opterna double section wall-mounted enclosures are designed to hold standard 19” rack mounted equipment and patch panels. The double section cabinet features a swing which allows easy back entry, a lockable glass door, adjustable front profiles and removable entry plates at the top and bottom.
Features
Wall Mount Cabinet, Double Section
• Double section frame structure for easy back entry • Constructed with rigid frames that can be fitted on a wall • Adjustable mounting rails in the front and rear • Top and bottom cable entry facility for easy cable installation • Front section with glass door and lock • Good ventilation and heat dispersion • Back section depth - 100mm; swing out • Removable side doors
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSCAB4rev1
1/3
Opterna Opterna R
R
Wall Mount Cabinet Double Section MDU Solutions Applications: • Designed for installations that comply with the EN 50173-1, EN 50174-1 & 2, ISO/IEC 11801,ANSI/TIA/EIA-568-C
Technical Specification: Standard • Comply with mounting dimensions to IEC 297-3 and DIN - 41494 for all equipments • IP 20 Material • SPCC cold rolled steel • Mounting profiles - 1.2mm • Other elements - 1.0mm • Door - Tempered glass Loading Capacity • 60 KG Surface Finish • Powder coated
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSCAB4rev1
2/3
Opterna Opterna R
R
Wall Mount Cabinet Double Section MDU Solutions
686.25 669.65
A
450 465 600
437 600
Front (without front door)
359.5
100
22
56
100 600 500
TOP
A
450 492 600
Back
Side
Front 340
478.5 530 600
40
A
500
770.05
770.05 685.05
Dimension:
600 A
Ordering Information: Part Number
Description
Capacity ‘U’
Width (mm) Depth (mm)
CAB-WMD-4-600-600
Wall Mount Cabinet, Double Section 4U
4
600
500 + 100
CAB-WMD-6-600-600
Wall Mount Cabinets, Double Section 6U
6
600
500 + 100
CAB-WMD-9-600-600
Wall Mount Cabinets, Double Section 9U
9
600
500 + 100
CAB-WMD-12-600-600
Wall Mount Cabinets, Double Section 12U
12
600
500 + 100
CAB-WMD-15-600-600
Wall Mount Cabinets, Double Section 15U
15
600
500 + 100
CAB-WMD-18-600-600
Wall Mount Cabinets, Double Section 18U
18
600
500 + 100
CAB-WMD-22-600-600
Wall Mount Cabinets, Double Section 22U
22
600
500 + 100
CAB-WMD-27-600-600
Wall Mount Cabinets, Double Section 27U
27
600
500 + 100
* For 500 depth cabinets replace 600 with 500, total depth will be 400 + 100 * Includes two fans and one 6 Way PDU with universal sockets supporting BS plug or Schuko plugs
Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSCAB4rev1
3/3
Opterna Opterna R
R
Floor Standing Steel Cabinets MDU Solutions Introduction Opterna floor standing steel cabinets are designed with precise craftmanship to meet the ever increasing demands of networking equipment located within a cabinet. To meet the diverse and ever changing demands of structured cabling systems and active equipment, the cabinets are engineered with strength and robustness.
Features
Floor Standing Steel Cabinets
• Steel frame structure • Vented top cover with cable entry provision and entry plate • Fan housing unit • Bottom cover with cable entry provision and entry plate • Side panels with slam latches and locking facility • Front tempered glass door with lock • Optional arc or flat 71% perforated front door with lock • Rear steel door with lock and 71% perforation for airflow • Side mounting angles • 19-inch equipment mounting angles • 800 mm wide cabinets are available with spacer and vertical patchcord management • Leveling feet and heavy duty castors • Optional plinth for under base cable entry
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSCAB5rev1
1/5
Opterna Opterna R
R
Floor Standing Steel Cabinets MDU Solutions Applications: • Designed for installations that comply with the EN 50173-1, EN 50174-1 & 2, ISO/IEC 11801, ANSI/TIA/EIA-568-C
Technical Specification: Standard: • Comply with mounting dimensions to IEC 297-3 and DIN - 41494 for all equipments • IP 20 Material: • SPCC cold rolled steel • Mounting profiles - 2.0 mm, Mounting angles - 1.5mm, Other elements - 1.2mm Loading Capacity: • 600 KG Surface Finish: • Powder coated RAL 9017 Black fine texture finish Package: • Available as flat packed or fully assembled • Default components included are: • 6 Way PDU, universal sockets supports BS plug or Schuko plugs • 4 Fans • Leveling Feet • Heavy Duty Castors
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSCAB5rev1
2/5
Opterna Opterna R
R
Floor Standing Steel Cabinets MDU Solutions Ordering Info: Part Number
Description
Capacity Height ‘U’ (H) in mm
CAB-FMS-18-600-600
Floor Standing Cabinet, Steel Frame, 18U, 600mm (W) x 600mm (D)
18
988.2
Width (W) in mm
Depth (D) in mm
600
600
CAB-FMS-18-600-800
Floor Standing Cabinet, Steel Frame, 18U, 600mm (W) x 800mm (D)
18
988.2
600
800
CAB-FMS-18-600-1000
Floor Standing Cabinet, Steel Frame, 18U, 600mm (W) x 1000mm (D)
18
988.2
600
1000
CAB-FMS-18-600-1200
Floor Standing Cabinet, Steel Frame, 18U, 600mm (W) x 1200mm (D)
18
988.2
600
1200
CAB-FMS-18-800-600
Floor Standing Cabinet, Steel Frame, 18U, 800mm (W) x 600mm (D)
18
988.2
800
600
CAB-FMS-18-800-800
Floor Standing Cabinet, Steel Frame, 18U, 800mm (W) x 800mm (D)
18
988.2
800
800
CAB-FMS-18-800-1000
Floor Standing Cabinet, Steel Frame, 18U, 800mm (W) x 1000mm (D)
18
988.2
800
1000
CAB-FMS-18-800-1200
Floor Standing Cabinet, Steel Frame, 18U, 800mm (W) x1200mm (D)
18
988.2
800
1200
CAB-FMS-22-600-600
Floor Standing Cabinet, Steel Frame, 22U, 600mm (W) x 600mm (D)
22
1166
600
600
CAB-FMS-22-600-800
Floor Standing Cabinet, Steel Frame, 22U, 600mm (W) x 800mm (D)
22
1166
600
800
CAB-FMS-22-600-1000
Floor Standing Cabinet, Steel Frame, 22U, 600mm (W) x 1000mm (D)
22
1166
600
1000
CAB-FMS-22-600-1200
Floor Standing Cabinet, Steel Frame, 22U, 600mm (W) x 1200mm (D)
22
1166
600
1200
CAB-FMS-22-800-600
Floor Standing Cabinet, Steel Frame, 22U, 800mm (W) x 600mm (D)
22
1166
800
600
CAB-FMS-22-800-800
Floor Standing Cabinet, Steel Frame, 22U, 800mm (W) x 800mm (D)
22
1166
800
800
CAB-FMS-22-800-1000
Floor Standing Cabinet, Steel Frame, 22U, 800mm (W) x 1000mm (D)
22
1166
800
1000
CAB-FMS-22-800-1200
Floor Standing Cabinet, Steel Frame, 22U, 800mm (W) x1200mm (D)
22
1166
800
1200
CAB-FMS-24-600-600
Floor Standing Cabinet, Steel Frame, 24U, 600mm (W) x 600mm (D)
24
1254.9
600
600
CAB-FMS-24-600-800
Floor Standing Cabinet, Steel Frame, 24U, 600mm (W) x 800mm (D)
24
1254.9
600
800
CAB-FMS-24-600-1000
Floor Standing Cabinet, Steel Frame, 24U, 600mm (W) x 1000mm (D)
24
1254.9
600
1000
CAB-FMS-24-600-1200
Floor Standing Cabinet, Steel Frame, 24U, 600mm (W) x 1200mm (D)
24
1254.9
600
1200
CAB-FMS-24-800-600
Floor Standing Cabinet, Steel Frame, 24U, 800mm (W) x 600mm (D)
24
1254.9
800
600
CAB-FMS-24-800-800
Floor Standing Cabinet, Steel Frame, 24U, 800mm (W) x 800mm (D)
24
1254.9
800
800
CAB-FMS-24-800-1000
Floor Mount Cabinet, Steel Frame, 47U, 800mm(W) x 1000mm(D)
24
1254.9
800
1000
CAB-FMS-24-800-1200
Floor Standing Cabinet, Steel Frame, 24U, 800mm (W) x1200mm (D)
24
1254.9
800
1200
CAB-FMS-27-600-600
Floor Standing Cabinet, Steel Frame, 27U, 600mm (W) x 600mm (D)
27
1388.25
600
600
CAB-FMS-27-600-800
Floor Standing Cabinet, Steel Frame, 27U, 600mm (W) x 800mm (D)
27
1388.25
600
800
CAB-FMS-27-600-1000
Floor Standing Cabinet, Steel Frame, 27U, 600mm (W) x 1000mm (D)
27
1388.25
600
1000
CAB-FMS-27-600-1200
Floor Standing Cabinet, Steel Frame, 27U, 600mm (W) x 1200mm (D)
27
1388.25
600
1200
CAB-FMS-27-800-600
Floor Standing Cabinet, Steel Frame, 27U, 800mm (W) x 600mm (D)
27
1388.25
800
600
CAB-FMS-27-800-800
Floor Standing Cabinet, Steel Frame, 27U, 800mm (W) x 800mm (D)
27
1388.25
800
800
CAB-FMS-27-800-1000
Floor Standing Cabinet, Steel Frame, 27U, 800mm (W) x 1000mm (D)
27
1388.25
800
1000
CAB-FMS-27-800-1200
Floor Standing Cabinet, Steel Frame, 27U, 800mm (W) x1200mm (D)
27
1388.25
800
1200
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSCAB5rev1
3/5
Opterna Opterna R
R
Floor Standing Steel Cabinets MDU Solutions
Part Number
Description
Capacity ‘U’
Height (H) in mm
Width (W) in mm
Depth (D) in mm
CAB-FMS-32-600-600
Floor Standing Cabinet, Steel Frame, 32U, 600mm (W) x 600mm (D)
32
1610.5
600
600
CAB-FMS-32-600-800
Floor Standing Cabinet, Steel Frame, 32U, 600mm (W) x 800mm (D)
32
1610.5
600
800
CAB-FMS-32-600-1000
Floor Standing Cabinet, Steel Frame, 32U, 600mm (W) x 1000mm (D)
32
1610.5
600
1000
CAB-FMS-32-600-1200
Floor Standing Cabinet, Steel Frame, 32U, 600mm (W) x 1200mm (D)
32
1610.5
600
1200
CAB-FMS-32-800-600
Floor Standing Cabinet, Steel Frame, 32U, 800mm (W) x 600mm (D)
32
1610.5
800
600
CAB-FMS-32-800-800
Floor Standing Cabinet, Steel Frame, 32U, 800mm (W) x 800mm (D)
32
1610.5
800
800
CAB-FMS-32-800-1000
Floor Standing Cabinet, Steel Frame, 32U, 800mm (W) x 1000mm (D)
32
1610.5
800
1000
CAB-FMS-32-800-1200
Floor Standing Cabinet, Steel Frame, 32U, 800mm (W) x1200mm (D)
32
1610.5
800
1200
CAB-FMS-37-600-600
Floor Standing Cabinet, Steel Frame, 37U, 600mm (W) x 600mm (D)
37
1832.75
600
600
CAB-FMS-37-600-800
Floor Standing Cabinet, Steel Frame, 37U, 600mm (W) x 800mm (D)
37
1832.75
600
800
CAB-FMS-37-600-1000
Floor Standing Cabinet, Steel Frame, 37U, 600mm (W) x 1000mm (D)
37
1832.75
600
1000
CAB-FMS-37-600-1200
Floor Standing Cabinet, Steel Frame, 37U, 600mm (W) x 1200mm (D)
37
1832.75
600
1200
CAB-FMS-37-800-600
Floor Standing Cabinet, Steel Frame, 37U, 800mm (W) x 600mm (D)
37
1832.75
800
600
CAB-FMS-37-800-800
Floor Standing Cabinet, Steel Frame, 37U, 800mm (W) x 800mm (D)
37
1832.75
800
800
CAB-FMS-37-800-1000
Floor Standing Cabinet, Steel Frame, 37U, 800mm (W) x 1000mm (D)
37
1832.75
800
1000
CAB-FMS-37-800-1200
Floor Standing Cabinet, Steel Frame, 37U, 800mm (W) x1200mm (D)
37
1832.75
800
1200
CAB-FMS-42-600-600
Floor Standing Cabinet, Steel Frame, 42U, 600mm (W) x 600mm (D)
42
2055
600
600
CAB-FMS-42-600-800
Floor Standing Cabinet, Steel Frame, 42U, 600mm (W) x 800mm (D)
42
2055
600
800
CAB-FMS-42-600-1000
Floor Standing Cabinet, Steel Frame, 42U, 600mm (W) x 1000mm (D)
42
2055
600
1000
CAB-FMS-42-600-1200
Floor Standing Cabinet, Steel Frame, 42U, 600mm (W) x 1200mm (D)
42
2055
600
1200
CAB-FMS-42-800-600
Floor Standing Cabinet, Steel Frame, 42U, 800mm (W) x 600mm (D)
42
2055
800
600
CAB-FMS-42-800-800
Floor Standing Cabinet, Steel Frame, 42U, 800mm (W) x 800mm (D)
42
2055
800
800
CAB-FMS-42-800-1000
Floor Standing Cabinet, Steel Frame, 42U, 800mm (W) x 1000mm (D)
42
2055
800
1000
CAB-FMS-42-800-1200
Floor Standing Cabinet, Steel Frame, 42U, 800mm (W) x1200mm (D)
42
2055
800
1200
CAB-FMS-45-600-600
Floor Standing Cabinet, Steel Frame, 45U, 600mm (W) x 600mm (D)
45
2188.35
600
600
CAB-FMS-45-600-800
Floor Standing Cabinet, Steel Frame, 45U, 600mm (W) x 800mm (D)
45
2188.35
600
800
CAB-FMS-45-600-1000
Floor Standing Cabinet, Steel Frame, 45U, 600mm (W) x 1000mm (D)
45
2188.35
600
1000
CAB-FMS-45-600-1200
Floor Standing Cabinet, Steel Frame, 45U, 600mm (W) x 1200mm (D)
45
2188.35
600
1200
CAB-FMS-45-800-600
Floor Standing Cabinet, Steel Frame, 45U, 800mm (W) x 600mm (D)
45
2188.35
800
600
CAB-FMS-45-800-800
Floor Standing Cabinet, Steel Frame, 45U, 800mm (W) x 800mm (D)
45
2188.35
800
800
CAB-FMS-45-800-1000
Floor Standing Cabinet, Steel Frame, 45U, 800mm (W) x 1000mm (D)
45
2188.35
800
1000
CAB-FMS-45-800-1200
Floor Standing Cabinet, Steel Frame, 45U, 800mm (W) x1200mm (D)
45
2188.35
800
1200
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSCAB5rev1
4/5
Opterna Opterna R
R
Floor Standing Steel Cabinets MDU Solutions
Part Number
Description
Capacity ‘U’
Height (H) in mm
Width (W) in mm
Depth (D) in mm
CAB-FMS-47-600-600
Floor Standing Cabinet, Steel Frame, 47U, 600mm (W) x 600mm (D)
47
2277.25
600
600
CAB-FMS-47-600-800
Floor Standing Cabinet, Steel Frame, 47U, 600mm (W) x 800mm (D)
47
2277.25
600
800
CAB-FMS-47-600-1000
Floor Standing Cabinet, Steel Frame, 47U, 600mm (W) x 1000mm (D)
47
2277.25
600
1000
CAB-FMS-47-600-1200
Floor Standing Cabinet, Steel Frame, 47U, 600mm (W) x 1200mm (D)
47
2277.25
600
1200
CAB-FMS-47-800-600
Floor Standing Cabinet, Steel Frame, 47U, 800mm (W) x 600mm (D)
47
2277.25
800
600
CAB-FMS-47-800-800
Floor Standing Cabinet, Steel Frame, 47U, 800mm (W) x 800mm (D)
47
2277.25
800
800
CAB-FMS-47-800-1000
Floor Standing Cabinet, Steel Frame, 47U, 800mm (W) x 1000mm (D)
47
2277.25
800
1000
CAB-FMS-47-800-1200
Floor Standing Cabinet, Steel Frame, 47U, 800mm (W) x1200mm (D)
47
2277.25
800
1200
Part Number
Description
Depth (D) in mm
CAB-AC-CS-350-1U
1U Cantilever shelf, 350 depth
350
CAB-AC-CS-350-2U
2U Cantilever shelf, 350 depth
350
CAB-AC-FS-450
Fixed shelf, 450 mm depth, for 600 depth cabinets
450
CAB-AC-FS-550
Fixed shelf, 550 mm depth, for 800 depth cabinets
550
CAB-AC-FS-750
Fixed shelf, 750 mm depth, for 1000 depth cabinets
750
CAB-AC-FS-950
Fixed shelf, 950 mm depth, for 1200 depth cabinets
950
CAB-AC-SS-450
Sliding shelf, 450 mm Depth, for 600 depth cabinets
450
CAB-AC-SS-550
Sliding shelf, 550 mm Depth, for 800 depth cabinets
550
CAB-AC-SS-750
Sliding shelf, 750 mm Depth, for 1000 depth cabinets
750
CAB-AC-SS-950
Sliding shelf, 950 mm Depth, for 1200 depth cabinets
950
CAB-AC-KB
Sliding Keyboard Shelf
-
CAB-AC-FT2
Fan Tray, 1U, 2 Fan Position
-
Default front door is 7000 series and rear door 7002 series, for other door configuration use the below mentioned codes. Door identification series: Glass door : 7000 Arc vented door : 7001 Flat vented door : 7002 Twin flat vented door : 7003
Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSCAB5rev1
5/5
Opterna Opterna R
R
Quick Assembly Connectors Fiber Interconnect & Passives
Introduction Opterna Quick Assembly connectors, also known as “no polish connectors” are designed to provide fast on-site installation. Field installation of 250 or 900um fiber, 2.0, 3.0mm or flat cable is achieved without the need for power or advanced polishing techniques. The pre-assembled connector can be installed in under a minute and re-used several times. It provides a reliable and durable optical connection and is especially suitable for advanced fiber optic systems requiring exceptional stability and low back reflections.
Features
Quick Assembly Connectors
• SC and LC interfaces • Available in UPC and APC end face finish • Singlemode and multimode • Fast installation in less than a minute • Use with 250 or 900um fiber, 2.0, 3.0mm or flat cable • Re-usable • Low insertion loss
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSQACrev1
1/3
Opterna Opterna R
R
Quick Assembly Connectors Fiber Interconnect & Passives
Applications: • FTTH/x networks • Optical communication systems • Local area networks • Optical cable interconnect • Telecoms
Specifications: dB
Unit
SC connector
LC connector
Connection Type
-
V-groove technology
Ferule Polishing Type
-
PC/UPC/APC
Fiber Type
-
Single and Multi mode
Cable Diameter
mm
Round - 900 um, 2.0mm, 3.0mm, flat cable
Insertion Loss
dB
Typical 0.3
Typical 0.1
Return Loss
dB
UPC-Typical 50
UPC-Typical 50
APC-Typical 55
APC-Typical 55
PC/UPC/APC
PC (MM)-Typical 20 Operating Temperature
Americas: (703) 653-1130 sales.us@opterna.com
C°
Europe: +44(0)2031 301 716 sales.eu@opterna.com
-45 to +85
Middle East: +971 4 299 7676 sales.me@opterna.com
-45 to +75
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSQACrev1
2/3
Opterna Opterna R
R
Quick Assembly Connectors Fiber Interconnect & Passives
Size & Dimensions:
Fig 1: SC Quick Assembly Connector
Fig 2: LC Quick Assembly Connector
Ordering Info: QAC Connector Type
Grade
Fiber Type
Cable Type
Color
LC
LC
P
PC
7A2
SM G657 A2
09
0.9mm
BL
Blue
SC
SC
U
UPC
OS2
SMG652D
20
2.0mm
GN
Green
A
APC
OM1 MM 62.5/ 125
30
3.0mm
BG
Beige
OM4 MM 50/ 125
FC
Flat Cable
UN
Universal for 0.9, 2.0, 3.0mm and flat cable
Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.
Americas: (703) 653-1130 sales.us@opterna.com
Europe: +44(0)2031 301 716 sales.eu@opterna.com
Middle East: +971 4 299 7676 sales.me@opterna.com
Asia Pacific: +91(0) 484 2104 779 sales.ap@opterna.com
Visit: Opterna.com DSQACrev1
3/3