SUPPLEMENTARY INSTRUCTIONS for the VISTA-50PL CONTROL/COMMUNICATOR
These instructions should be used in conjunction with the Installation Instructions provided with the VISTA-50PL Control Communicator.
ADDITIONAL PROGRAMMING FIELDS The following programming fields are available in the second page of programming fields. Refer to the PROGRAMMING THE SYSTEM section of the Installation Instructions for specific programming procedures. Brackets [ ] indicate default value. 1*50 No. of SECONDS ADDED PER DAY Enter the number of seconds [00] - 30 needed to be added per day to correct the real-time clock 1*51 No. of SECONDS REMOVED PER DAY Enter the number of seconds [00] - 30 needed to be removed per day to correct the real-time clock 1*54 INTERNAL CLOCK SYNC 1 = use internal crystal for real-time clock; [0 = use AC sync for clock] 1*55 DATE FORMAT SELECTION Select the desired date format where: [0 = mmddyy]; 1 = ddmmyy 1*56 60Hz/50Hz REAL-TIME CLOCK SYNCHRONIZATION Enter the appropriate value where: [0 = 60Hz Mains]; 1 = 50Hz Mains This selection is used to synchronize the real-time clock and X-10 devices
A DIVISION OF PITTWAY CORPORATION N6379-2 6/98