Intelligent lighting control by Servodan A/S

Intelligent lighting control Product data for intelligent lighting control

June 2011

May 2012

Table of contents

The product data in this catalogue gives you thoroug information about the products, their features, characteristics, dimensions and type numbers. Additional information about the products – including installation instructions – are available on www.servodan.com.

Outdoor lighting control ................................................................ Page 3 Product guide outdoor Minilux day/night switches

Minilux motion detectors Minilux controls on/off

.............................................................................................................4-5 Stand-alone 230 V/12 V/24 V..............................................................6-11 Control DIN 17,5 mm 230 V ...........................................................12-13 Control DIN 17,5 mm 230 V/display and built-in clock ....................14-15 Control DIN 35 mm 230 V, with display ................................................ 16 Control DIN 35 mm 230 V, 2-wired...................................................... 17 Stand-alone detector, 230 V ..............................................................18-21 Control 230 V DIN for 24 V motion detectors .................................22-23

Indoor lighting control ................................................................. Page 25 Product guide indoor Motion Control On/Off

.........................................................................................................26-27 Control On/Off 1 ch., DIN 35 mm, 230 V ........................................... 28 Control On/Off 1-3 zones, DIN, 24 V ..............................................29-30 Luxstat control system Control DIM 1-3 zones, DIN, 24 V ..................................................31-32 Contorl DALI 1-3 zoner ...................................................................33-34 Power pack 3 ch., DIN, 230 V/24 V ...................................................... 35 Push button for Luxstat........................................................................... 36 Control box DIM, 2 zones, 230 V ....................................................37-38 Wireless control box DIM, 1-3 zone system .....................................39-41 Motion/Presence detectors 24 V Motion detector 90° – ceiling/flush mounting.......................................... 42 Motion detector 90° – wall/corner mounting (24 V-12 V) ..................43-45 Presence detector 360° – ceiling/flush mounting ................................46-48 Presence detector PLUS 360° – ceiling mounting ................................... 49 Presence detector 360°/90°, built in relay – ceiling/wall .....................50-51 Motion detector 90°, built in relay – ceiling/wall ..................................... 52 Motion/Presence detectors 230 V Presence detector 360° – ceiling/flush mounting, IR-remote control ....... 53 Presence detector 360° – ceiling mounting, 1 or 2 ch. ......................54-56 Presence detector 360° – dim, DALI/DSI/1-10 V ..............................57-58 Presence detector PLUS 360° – master/slave ....................................59-60 Parts & accesories Protection caps for detectors .................................................................. 61 Sensor base ........................................................................................... 62 IR Remote control ............................................................................63-64 Electronic starter .................................................................................... 65 Light sensors Light sensor 24 V /0-10 V ...................................................................... 66 Wireless transmitter EnOcean Presence detector 360°, 230 V/24 V – ceiling ...................................67-68 Presence detector 360°, battery-less – ceiling ......................................... 69 Wireless receiver EnOcean Receiver box – Wall, 230 V.................................................................... 70 Dimmers Universal RLC dimmers, resistive/inductive/capacitive loads ...............71-73

Low voltage................................................................................... Page 75 Electronic converters

.............................................................................................................. 76

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Outdoor

Outdoor lighting control

Product guide outdoor

Power consumption

Lux range

Load incandescent lamps

Max. starting peak

Colour

IP 54

230 V AC

<1W

2 - 200 lux

3.000 W

3.000 VA 140 µF

165 A/20 mS

White

41-048 5703102 203854 34 24 008 960

IP 54

230 V AC

<1W

3 - 300 lux

3.000 W

3.000 VA 140 µF

165 A/20 mS

White

41-054 5703102 203588 34 24 008 931

IP 54

230 V AC

<1W

5 - 300 lux

2.300 W

1.200 VA 140 µF

80 A/20 mS

White

41-055 5703102 204202 34 24 008 957

IP 54

230 V AC

<1W

5 - 500 lux

2.300 W

1.200 VA 140 µF

80 A/20 mS

White

With integrated radio-controlled DCF-clock

41-044 5703102 201287 34 24 008 915

IP 54

24 V AC/DC

<1W

2 - 200 lux

80 W

White

Minimum load > 150 mA/24 V DC

41-042 5703102 201270 34 24 008 902

IP 54

12 V AC/DC

<1W

2 - 200 lux

40 W

White

Minimum load > 300 mA/12 V DC

Other

Supply voltage

41-047 5703102 201294 34 24 008 928

Minilux day/night switches 230 V AC etc.

Inductive load

Protection class

230 V AC Stand-alone day/night switches

Detection angle

Detection range

Power consumption

Lux range

Load incandescent lamps

Max. starting peak

Colour

41-227 5703102 006806 34 24 005 989

IP 54

200°

14 m

<1W

3 - ∞ lux

2.300 W

1.200 VA 140 µF

80 A/20 mS

White

41-231 5703102 203335 34 24 100 075

IP 54

180°

14 m

<1W

3 - ∞ lux

2.300 W

1.200 VA 140 µF

80 A/20 mS

White and anthracite

41-232 5703102 203342 34 24 100 088

IP 54

180º

14 m

<1W

5 - ∞ lux

2.300 W

1.200 VA 140 µF

80 A/20 mS

White and anthracite

41-233 5703102 203359 34 24 100 091

IP 54

180º

14 m

<1W

5 - ∞ lux

40-400 W

50-200 VA

Minilux motion detectors 230 V AC

Inductive load

Protection class

230 V AC Stand-alone motion detectors

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

White

Product guide outdoor

Load incandescent lamps

Max. starting peak

Power consumption

18-092 5703102 203250 34 24 008 371

3 - 300 lux

2.300 W

1.200 VA 140 µF

80 A/20 mS

<1W

3-wired connection high voltage installation (3x1,5 mm2)

18-093 5703102 203267 34 24 008 384

3 - 300 lux

2.300 W

1.200 VA 140 µF

80 A/20 mS

<1W

Integrated clock function 3-wired connection high voltage installation (3x1,5mm2)



36-092 5703102 203908 34 24 000 080

3 - 30 klux

2.300 W

1.200 VA 140 µF

80 A/20 mS

<1W

3-wired connection low voltage installation



36-094 5703102 205261 34 67 001 270

3 - 300 lux

2.300 W

1.200 VA 140 µF

80 A/20 mS

<1W

Only 2-wired connection low voltage installation

Light sensor Light sensor 43-196 43-198 (56 V DC)

(24 V DC)

Light sensor 43-128 (24 V DC)

Other

Minilux day/night switches 230 V AC

Inductive load

Lux range

230 V AC day/night switches – system solutions



36-080 5703102 203298 34 24 008 724

On/off 2.300 W

<1W

On/off 1.200 VA

Other

Kapacitive load

0...60 min.

Power consumption

3 - 30 klux

Load incandescent lamps

Off delay

Minilux motion detectors 230 V AC

Lux range

230 V AC motion detectors – system solutions

Motion detector 41-262

Motion detector 41-272

(24 V DC)

Incl. light sensor



Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com



Product data

41-047

230 V

103

Dimensions

1:1 20-12-04 KOE

103

Skala : Dato : Tegnet:

Technical data Input Supply voltage Power consumption

230 V AC ±10 % 0,9 W

Minilux day/night switch 230 V • Smart design • Internal lux-setting 2–200 lux (cannot be deactivated by unauthorised persons) • Handles heavy loads 3.000 W / 3.000 VA • Test button for correct connection • On mounting base • Energy saver: turns on only when daylight is insufficient • The daylight switch can be connected to a time switch for night-time turn-off

41M047_03_R1_031120KOE_Måltegning

Output NO, µ16 A, 250 V AC Relay contact Actuating current max. 165 A/20 mS Max. compensation capacity 140 µ F

Lux setting Skala : Dato : Tegnet:

1:1 20-12-04 KOE

Test button Pressing the button turns on the lighting for 1 minute. 41M047_03_R1_031120KOE_Måltegning

Load Incandescent lamps 3.000 W Tungsten-halogen lamps (230 V AC) 3.000 W Fluorescent lamps (uncompensated) 3.000 VA Hql (mercury) 1.000 W Hqi (metal halide lamps) 1.000 W HF ballast 1 x 34 W = 65 stk. Traditional coil 1 x 58 W = 25 stk. Energy-saving bulbs 1 x 18 W = 65 stk. Performance Lux range Hysteresis Time delay Protection class Cable Ambient temperature

Light-emitting diode for indication of current light level Preset at factory - 35 lux

Lux setting 2...200 lux

2...200 lux approx. 50 % approx. 1 min. IP 54 2 x Ø8...13 -50° C...+ 50° C

Light-emitting diode for indication of current light level. Approval CE according to

The Minilux day/night switch is specifically designed for controlling outdoor lighting. The lighting turns on automatically when daylight decreases below the preset lux level (adjustable in the range 2 – 200 lux) and turns off when the daylight switch detects daylight above the preset level. The day/night switch has been designed so it has the ideal technical angle for detecting daylight. The light sensor is placed under the slightly upward-tilting front cover so the sensor points skywards. Activating the test button under the front cover will turn on the lighting for 1 minute. The day/night switch is easy to mount and service, as all electronic parts are placed in the front cover. This makes it easy to carry out the wiring after mounting the sensor. The entire base is used as the connection housing.

EN 60669-2-1

Connection 41-047

41-047 lx

Order number Combined with time switch

Product

Minilux day/night switch

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type EAN no.

41-047 5703102 201294

Product data

Dimensions

Minilux day/night switch 230 V

41-054 74

• Classic design • External lux-setting 5–300 lux • On mounting base • Energy saver: turns on only when daylight is insufficient • The daylight switch can be connected to a time switch for nighttime turn-off

Technical data

Connection

Input Supply voltage Power consumption

41-054

The Minilux day/night switch is specifically designed for controlling outdoor lighting. 230 V AC ±10 % 0,9 W

Output NO, µ10 A, 250 V AC Relay contact Actuating current max. 80 A/20 mS Max. compensation capacity 140 µ F

Load Incandescent lamps 2.300 W Tungsten-halogen lamps (230 V AC) 2.300 W Fluorescent lamps (uncompensated) 1.200 VA Hql (mercury) 500 W Hqi (metal halide lamps) 500 W HF ballast 1 x 34 W = 30 pcs. Traditional coil 1 x 36 W = 25 pcs. Energy-saving bulbs 1 x 18 W = 58 pcs.

L N

41-054

Performance Lux range Time delay Protection class Ambient temperature

The lighting turns on automatically when daylight decreases below the preset lux level and turns off when the daylight switch detects daylight above the preset level. The LED acts as an adjustment aid, and therefore responds without any time delay. The LED is turned on when the measured lux level is lower than or equal to the scale value setting. The entire base is used as the connection housing, which ensures a quick and easy installation.

5…300 lux approx. 1 min. IP 54 -25° C...+ 45° C

Light-emitting diode for indication of current light level. Approval CE according to

L N

Function

EN 60669-2-1

300

Lux

5 0

8 10 12 14 16 18 20 22 24

LED on

Order number

LED off

Product

Type

Minilux day/night switch 41-054

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

EAN no.

5703102 203588

Product data

Dimensions

Minilux day/night switch 230 V

41-048

• Discreet design • External lux-setting 3...300 lux • LED acts as adjustment aid • Handles heavy loads 3.000 W / 3.000 VA • Energy saver: turns on only when daylight is insufficient • The daylight switch can be connected to a time switch for nighttime turn-off

Technical data 95

Input Supply voltage Power consumption

230 V AC ±10 % 0,9 W

Output NO, µ16 A, 250 V AC Relay contact Actuating current max. 165 A/20 mS Max. compensation capacity 140 µ F Load Incandescent lamps 3.000 W Tungsten-halogen lamps (230 V AC) 3.000 W Fluorescent lamps (uncompensated) 3.000 VA Hql (mercury) 1.000 W Hqi (metal halide lamps) 1.000 W HF ballast 1 x 34 W = 65 stk. Traditional coil 1 x 58 W = 25 stk. Energy-saving bulbs 1 x 18 W = 65 stk. Performance Lux range Hysteresis Time delay Protection class Cable Ambient temperature Material

3...300 lux approx. 50 % approx. 1 min. IP 54 2 x M 20 -50° C...+ 50° C UV-resistant polycarbonat

Light-emitting diode for indication of current light level. Approval CE according to

EN 60669-2-1

Connection 41-048 FCL

41-048 FCL

Order number Combined with time switch

Product

Minilux day/night switch

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type EAN no.

41-048 5703102 203854

Product data

Minilux day/night switch 230 V with integrated radiocontrolled clock

41-055

128.5

Dimensions

80.0

Technical data

Connection

Input Supply voltage Power consumption

41-055

Output Relay contact (potential free) Max. starting current Max. compensation capacity

41-055

NO, µ10 A 80 A / 20 ms 140 µF

Load Incandescent lamps 2.300 W Tungsten-halogen lamps (230 V AC) 2.300 W 1.200 VA Fluorescent lamps (uncompensated) Hql (mercury) 500 W Hqi (metal halide lamps) 500 W 1 x 34 W = 30 pcs. HF ballast Traditional coil 1 x 36 W = 25 pcs. Energy-saving bulbs 1 x 18 W = 58 pcs.

230 V AC ± 10 % 0,9 W

Performance Lux range Protection class Ambient temperature CE according to

L2 L1 N

Dry relay contact

5-500 lux IP 54 -25°...+50° C EN 60669-2-1

Function

• With integrated radio controlled clock (DCF) and seven activation programmes • The clock function can be used without the DCF signal • Classic design • External lux-setting 5–500 lux • Energy saver: turns on only when daylight is insufficient • Easy to install and to programme The Minilux day/night switch is speci-fically designed for controlling outdoor lighting. The lighting turns on automatically when daylight decreases below the preset lux level and turns off when the daylight switch detects daylight above the preset level. During the lighting periode the switch can be programmed to turn off light when needed - for instance in the middle of the night or during weekends. The entire base is used as the connection housing, which ensures a quick and easy installation. The callsign DCF77 stands for D = Deutschland (Germany) C = Long wave signal F = Frankfurt 77 = frequency: 77.5 kHz

Lux

Evening

Morning

Lux setting 35 lx

18:00 Daylight controlled Activation, Prog. 1 and 2 Time on 18:00 and 05:00 Time off 23:00 and 09:00 Light

On Off

20:00

23:00

05:00

07:00

09:00

Time

Order number Product

Minilux day/night swi.

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type

41-055

EAN no.

5703102 204202

Product data

41-044

24 V

1:1 20-12-04 KOE

103

Skala : Dato : Tegnet:

Technical data Input Supply voltage Power consumption

24 V AC/DC 40 m A

41M047_03_R1_031120KOE_Måltegning

Lux setting Skala : Dato : Tegnet:

1:1 20-12-04 KOE

Test button Pressing the button turns on the lighting for 1 minute. 41M047_03_R1_031120KOE_Måltegning

Output Relay contact =1 Max load: Incandescent lamps Minimum load DC Performance Lux range Hysteresis Time delay Protection class Cable inputs Ambient temperature

NO, µ4A, Cos ϕ 80 W > 150 mA/24 V 2...200 lux approx. 50 % approx. 1 min. IP 54 2 x M 20 -50° C...+ 50° C

Light-emitting diode for indication of current light level 41-044

Light-emitting diode for indication of current light level

Approval CE according to

Preset at factory - 35 lux

Minilux day/night switch 24 V AC/DC • Smart design • Internal lux-setting 2–200 lux (cannot be deactivated by unauthorised persons) • Test button for correct connection • On mounting base • Energy saver: turns on only when daylight is insufficient • The daylight switch can be connected to a time switch for night-time turn-off

103

Dimensions

EN 60669-2-1

Lux setting 2...200 lux

24 V AC/DC

Connection

41-044

41-044 lx

24 24 V AC/DC V AC/DC

24 AC/DC 24V V AC/DC Combined with time switch

Order number Product

Minilux day/night switch

41-044

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type EAN no.

41-044 5703102 201287

Product data

41-042

12 V

1:1 20-12-04 KOE

103

Skala : Dato : Tegnet:

Technical data Input Supply voltage Power consumption

12 V AC/DC 80 mA

41M047_03_R1_031120KOE_Måltegning

Output Relay contact

Lux setting Skala : Dato : Tegnet:

1:1 20-12-04 KOE

Test button Pressing the button turns on the lighting for 1 minute. 41M047_03_R1_031120KOE_Måltegning

NO, µ4A, Cos ϕ =1

Max load: Incandescent lamps Minimum load DC Performance Lux range Hysteresis Time delay Protection class Cable inputs Ambient temperature

40 W > 300 mA/12 V 2 – 200 lux approx. 50 % approx. 1 min. IP 54 2 x M 20 -50° C...+ 50° C

Light-emitting diode for indication of current light level 41-042

Light-emitting diode for indication of current light level

Approval CE according to

Preset at factory - 35 lux

Minilux day/night switch 12 V AC/DC • Smart design • Internal lux-setting 2–200 lux (cannot be deactivated by unauthorised persons) • Test button for correct connection • On mounting base • Energy saver: turns on only when daylight is insufficient • The daylight switch can be connected to a time switch for night-time turn-off

103

Dimensions

EN 60669-2-1

Lux setting 2...200 lux

12 V AC/DC

Connection

41-042

41-042 lx

12 12 V AC/DC V AC/DC

V AC/DC 1212 V AC/DC Combined with time3:1 switch

Order number Product

Minilux day/night switch

41-042 lx

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type

41-042

EAN no.

5703102 201270

Product data

Dimensions

Minilux control (day/night switch) with separate light sensor

18-092 53

• 17,5 mm module • Lux range 3-300 lux • For installation in distribution board or simple casing • Class I product – The sensor lead must be installed as a high voltage installation • LED indicating current light level

17,5

Technical data

Connection

Input Supply voltage Power consumption Signal from light sensor

Lux 0-10V

A B

Light sensor 43-196

18-092 150

Lux

B1 B2 B3

300

L N

Minilux Control 18-092

Output Relay contact NO, µ10 A, 250 V AC Starting peak 80 A / 20 ms Compensation capacity 140 µF Output voltage 56 V DC

35 3

230 V AC ± 10 % 0.9 W 0-10 V

Load Incandescent lamps Fluorescent tubes, not comp. Halogen incandescent lamps

2300 W 1200 VA 500 W

Performance Lux range 3...300 lux Adjustment range for Lux on 3...270 lux Tolerance of lux range ±10 % Time delay 1 min. Protection class IP 20 Insulation class Class I Cable to 43-196 3 x 1,5 mm² Max cable lenght to 43-196 100 m Temperature range +5° C...+50° C

The light is switched on at the pre-set lux level (default 35 lux). The light is switched off again when the daylight exceeds the Lux on setting by 10 %. Minilux 18-092 control switches on the light immediately after a power failure for one minute, and on startup. The LED acts as an adjustment aid, and therefore responds without any time delay. The LED goes off when the measured lux level is lower than or equal to the pre-set lux level. The product is class I, so the sensor lead must be installed as a high voltage installation, max. length 100 m, 3 x 1.5 mm².

Approval CE according to EN 60669-2-1

Function

Evening

Morning

Lux

Off Lux on +10 % (38,5 lux) Lux on 35 lux

Order numbers: Time on off

Produkt

Minilux Control Minilux light sensor

Type

18-092 43-196

Complete with light sensor (18-092 + 43-196) 18-192

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

EAN nr.

5703102 203250 5703102 203373 5703102 203472

Product data

Minilux light sensor 0-10 V for outdoor mounting

43-196

52.0

Dimensions

• For connection to Minilux Control 18-092 • 56 V DC • Screw terminal connection • Protection class IP 54 34.5

Minilux light sensor 43-196 is for outdoor lighting control.

Technical data

Connection to Minilux 18-092

Lux

Light sensor 43-196

0-10V

Minilux Control 18-092

18-092

Input Supply voltage

56 V DC ± 10 %

Output Output voltage

0-10 V

Performance Lux range Protection class Connection Distance from Control Cable Ambient temperature

The light sensor has screw terminal connection, so there is no need for extra junction boxes.

3...300 lux IP 54 Screws & terminal Max. 100 m 3 x 1,5 mm² -40° C...+50° C

The light sensor has a IP 54 protection class. Please note! The light sensor must be connected to a class I Minilux Control, and therefor wiring to sensor must be set up as for power current. Placement: By placement on a wall you must make allowance for the shadow effects on the sensor. (see fig. 1)

150

The sensor must be placed notherly, because north is lightneutral in proportion to the suns daily cycle east-south-west.

35 3

Lux

300

Connection to external control system

Lux D1

0-10V

Light sensor 43-196

L 1

0-10 V

Ri ³ 2 K ohm

56 V DC

PLC PPC BMS CTS

Placement

SENSOR

 Fig. 1



Order numbers Product

Minilux light sensor Minilux Control

Type

43-196 18-092

Complete with Day/night switch (18-092 + 43-196) 18-192

EAN no.

5703102 203373 5703102 203250 5703102 203472 R2

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Minilux Control (day/night switch) with seperate setting of morning and evening level. Integrated clock function for night blocking.

18-093 53

• • • •

17,5

Connection

Technical data

Lux

Light sensor 43-198

0-10V

A B

Input Supply voltage 230 V AC ± 10 % Power consumption 0.9 W Signal from light sensor 43-198 0-10 V

Output Relay contact Starting peak Compensation capacity Supply voltage 43-198

18-093

Lux on off

Test

±1h

on off Time

Minilux Control 18-093

Mode Set

C D

Push button switch for deactivating the time blocking period.

Test

±1h

on off Time

Load Incandescent lamps Fluorescent tubes, not comp. Halogen incandescent lamps

2300 W 1200 VA 500 W

Performance Lux range Lux on Lux off

Lux on off

NO, µ10 A, 250 V AC 80 A / 20 ms 140 µF 24 V DC

Display

3...300 lux 10...300 lux 10 %...70 % of Lux on (Min. 3 lux, max. 90 lux) Tolerance of lux range ±10 % Time delay 1 min. Protection class IP 20 Backup for clock > 2 hours (when the unit has been connected at least 5 minutes.) Clock stability at 20°C, per day ±1s Insulation class Class I Temperature range +5° C...+50° C Approval CE according to

17,5 mm module Lux on 3-300 lux Easy setting via display For installation in distribution board or simple casing • Class I product - The sensor lead must be installed as a high voltage installation Minilux Control 18-093 is easy to programme via display. In the display you can set Lux on, Lux off, time and night blocking. The light is switched on at the pre-set lux level (defaul 35 lux). In the mor-ning, the light is switched off again at the lower Lux off setting. Lux off can be set to 10-70 % of Lux on (but min. 3 lux and max. 90 lux). Minilux Control 18-093 has an integrated clock function allowing the light to be switched off completely during a pre-defined period. Switching off the lighting for example during the night means more energy saving. The time blocking period can be deactivated by mounting a switch between terminals øC1 and øC2. After a power failure and on startup the light will be switched on for one minute. The product is class I, so the sensor lead must be installed as a high voltage installation, max. length 100 m, 3 x 1.5 mm².

EN 60669-2-1

Lux Evening

Morning

Lux on 35 lx Lux off 20 lx

Order numbers 18:00

Lighting Control Night blocking Light

on off

23:00

06:00 08:00

Time

Product

Minilux Control Minilux lyssensor

Type

18-093 43-198

Complete with light sensor (18-093 + 43-198) 18-193

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

EAN no.

5703102 203267 5703102 203595 5703102 203489

Product data

Minilux light sensor for outdoor mounting

43-198

52.0

Dimensions

34.5

• 43-198 for connection to Minilux Control 18-093, Minilux Control 36-092 and Control 36-080 • 24 V DC • Screw terminal connection • Protection class IP 54 Minilux light sensor 43-198 is for outdoor lighting control.

Technical data

Connection

Lux

Light sensor 43-198

0-10V

Input Supply voltage

24 V DC ± 10 %

Output Output voltage

0-10 V

The light sensor has a IP54 protection class.

Performance Lux ranges: A1

3...300 lux, 30...3K lux 300...30K lux, 600...60K lux Protection class IP 54 Connection Screw terminals Distance from Control Max. 100 m Cable: Class I Control 3 x 1,5 mm² Cable: Class II Control 0,6 mm Ambient temperature -40° C...+50° C

Minilux Control 18-093

18-093

Lux on off

Test

±1h

on off Time

Connection to external control system

Mode Set

Lux

Light sensor 43-198

0-10V

1 C1

Lux

0-10V

24 V DC

36-080

Please note! If the light sensor is connected to a class I Minilux Control (18-093), the wiring to the sensor must be set up as for power current. Placement: By placement on a wall you must make compensation for the shadow effects on the sensor. (see fig. 1) The sensor must be placed notherly, because north is lightneutral in proportion to the suns daily cycle east-south-west.

0-10 V

Ri ³ 2 K ohm PLC PPC BMS CTS

The light sensor has screw terminal connection, so there is no need for extra junction boxes.

3 4

Control 36-080

30 - 3000 lx 300 - 30K lx 600 - 60K lx 3 - 300 lx

Minilux Control

Lux Lux range on

Off delay Test

App In

Out

Mode

Set +

Test

Set -

Placement C

L N

SENSOR





Order numbers Product Fig. 1

Minilux light sensor

Type

43-198

EAN no.

5703102 203595 R2

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Minilux Control (day/night switch) with separate light sensor

36-092 54

• 35 mm modul • 3 lux ranges • For installation in distribution board or simple casing • Class II product – cable to light sensor can be installed as low-voltage • Easy settings via display

Technical data

Connection

Lux

Light sensor 43-198

0-10V

Minilux Control

36-092 Lux Lux range on

Test

Mode

Set +

Test

Set -

The Minilux 36-092 Control is designed for fitting in boards on DIN rails.

Input Supply voltage Load

Minilux Control 36-092

External Light Sensor 43-198, which measures the current daylight level, is connected to 36-092

Output Relay contact NO, µ10 A, 250 V AC Max load: Incandescent lamps 2.300 W 1.200 VA Fluorescent tubes, not compensated Halogen incandescent lamps 500 W Compensation capacity 140 µF Max. starting peak 80 A / 20 ms Secondary voltage 24 V DC ±10 % Ripple max. 0,5 Vpp

The night switch is easy to programme via the display. Lux on can be set in the module. There is also a facility to test the installation.

Performance Lux range

230 V ± 10 % 50 Hz max. 40 mA (no short circuit protection) Power consumption ca. 2 W Signal from light sensor 0-10 V

3...300 lux 30...3.000 lux / 300-30.000 lux Setting range 3...270 lux 30-2.700 lux / 300-27.000 lux Tolerance of lux range ±10 % Positive hysteresis 10 % Protection class IP 20 Insulation class Class II Ambient temperature +5° C ... +50° C Approvals CE according to

The light is switched on at the preset Lux on value (default 35 lux). In the morning the light is switched off once more when a value of Lux on + 10 % is reached.

The current light level can be read off from the display. In the event of a power failure and at startup, the light is switched on for 1 minute. The product is designed as class II – the cable to the light sensor can be installed as low-voltage.

EN 60669-2-1

Function Lux Evening

Morning

Light Off Lux on +10% (38,5 lux) Light On Lux on 35 lux

Order numbers Product

Minilux Control Minilux light sensor on off

Time

Type

36-092 43-198

Complete with light sensor (36-092 + 43-198) 36-192

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

EAN no.

5703102 203908 5703102 203595 5703102 203915

Product data

Dimensions

Minilux Control, complete with separate light sensor (2-wired) for outdoor lighting control

36-194 6

• Complete system with control and external light sensor • 2-wired connection of control and light sensor • 35 mm module

36-094

43-128

Technical data

Input (36-094) Supply voltage Power consumption

230 V ± 10 % 50 Hz 2.5 W

Output (36-094) Relay contact NO, µ16 A Number of connections at 16 A 6000 Max load: Incandescent lamps 3000 W 1200 VA Fluorescent tubes, not compensated Halogen incandescent lamps 2300 W Energy-saving lamps 58 pcs. (18 W) Max. compensation capacity 140 µF Max. starting peak 165 A / 20 ms

Connection 43-128 Light sensor

The Minilux Control 36-094 is a day/night switch designed for fitting in boards on DIN rails. The external Light Sensor 43-128, which measures the current daylight level, is connected to 36-094. The connection to the light sensor can be made as a 2-wired low-vol-tage installation. The light is switched on at the preset Lux on value (default 35 lux). In the morning the light is switched off when the value of Lux on + 10 % is reached. The night switch is easy to set via the Luxbutton and diode.

Lux

+ -

Sensor

L N

Performance (36-094) Lux range Time delay Cut off Protection class Insulation class Ambient temperature

3-300 lux approx. 1 min. “Lux on” + 10% IP 20 Class II +5° C ... +50° C

Performance (43-128) Lux range Protection class Insulation class Ambient temperature

3-300 lux IP 20 Class II +5° C ... +50° C

Approvals CE according to

EN 60669-2-1

Wiring – control/light sensor

Function

A (mm²)

Lux Evening

Morning

Light Off Lux on +10% (38,5 lux) Light On at 35 lux

L (m)

2 x 0,25

2 x 0,75

150

2 x 1,50

400

Order numbers Product

Daylight-controlled light:

on off

Time

Minilux Control with light sensor Minilux Control Light sensor

Type

EAN no.

36-094 43-128

5703102 205261 5703102 205285

36-194

5703102 205278

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Minilux motion detector (230 V) type 41-227 for outdoor lighting control

41-227

Dimensions

• • • • •

122

Technical data Input Supply voltage Power consumption

Connection PIR

Brown Blue

Output Relay contact NO, µ 10 A, 250 V, cos ϕ = 1 Starting peak 80 A/20 ms Compensation capacity 140 µF

Red

230 V AC ±10 % 0.8 W

Load Incandescent lamps Fluorescent tubes, not compensated Tungsten-halogen lamps (230 V)

L1 N

PIR

Performance Detection angle Detection range Time delay Lux range Protection class Sensitivity Mounting hight Ambient temperature

L1 N

2.300 W 1.200 VA 2.300 W

Connection for 230 V Detection angle 200° Range 14 m Time delay up to 12 min. External setting of lux level, time and sensitivity

The Minilux motion detector 41-227 responds to movement and temperature differences. The detector, with its detection angle of 200°, is suitable for controlling lighting in sur-rounding outdoor areas. A built-in light sensor prevents the lightning to switch on by day. The lighting can by switched on with an indoor switch (Switches off when the adjusted time expires). The head of the detector can be moved slightly up and down.

200° 3-14 m. 6 sec...12 min. from 3 Lux IP 54 Adjustable 2-3 m -20° C...+40° C

Approvals CE according to

EN 60669-2-1

200° Detection

Settings

200°

14m

7 14m

3 0 3

14m

3 0 3

METER

LUX

+ TIME

2m 2m

Order number

3 3 77 18

14mm 14

Product

Motion detector

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type

41-227

EAN no.

5703102 006806 R3

Product data

Dimensions 72

Minilux motion detector (230 V) for outdoor lighting control

41-231 41-231/AN

• 230 V connection • Detection angle 180° • Detection range up to 14 meters • Time delay up to 30 mins. • Setting of lux, time and meters below cover • Facility to block detection range

125

Technical data

Connection

41-231

Blue Brown Red N

Blue

Blue Brown Red L

230 V ± 10 % 50 Hz 0.6 W

Output Relay contact Starting peak Compensation capacity Load Incandescent lamps Fluorescent tubes, not compensated Halogen incandescent lamps

41-231

Input Supply voltage Power Brown Red consumption

The detector has an integrated light sensor, which guarantees that the lighting is only switched on when detecting people in motion and the daylight level (lux level) is below the preset level.

NO, µ10 A 80 A/20 ms 140 µF

The lighting remains switched on as long as moving people are detected.

2300 W 1200 VA 2300 W

The detector’s integrated timer is used to set the required time delay, which ensures that the light remains on for a period after the last person has left.

Blue Brown Red

Performance Detection angle 180º Detection range 41-231 0–14 meter Detection range 41-231/AN 0-11 meter Time delay 8 sec...30 min Lux range 5...∞ lux Protection class IP 54 Insulation class Class II Ambient temperature -20° C...+45° C Cable entry 2 x ø12.5 mm bushes fitted Colour 41-231 white, Ral 9010 41-231/AN antracit, Ral Material UV-resistant ASA-plast

Detection range

180°

Approvals CE according to

EN 60669-2-1

2,5 m

The enclosed cover can be used if you wish to screen off an area from detection.

11/14 m

More sensitive LUX

11/14 m

More sensitive

Detection range 41-231/AN 0-11 meter Detection range 41-231 0-14 meter

Range in meter 14 m 8m 6m

TIME 30m

The detector can be fitted directly to a wall.

11/14 m

0 Less sensitive

A switch can be integrated if manual activation is required. The button must be activated for >4 seconds in order for the detector to be switched on. The detector will switch on independently of lux, and the light will remain on in the set time.

2,5 m

Settings 11/14 m

Recommended installation height: 2-3 m. At 2.5 m the detector has a range of 14 m over 180°.

Order number Product

Type

EAN no.

Motion detector white 41-231 5703102 203335 Motion detector antracit 41-231/AN 5703102 205964 R7

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Minilux motion detector (230 V) for outdoor lighting control

41-232 41-232/AN

130

• 230 V connection • Detection angle 180° • Detection range up to 14 meters • Time delay up to 30 mins. • Setting of lux, time and meters below hidden cover • Facility for ceiling installation • Facility to block detection range

Technical data Input Supply voltage Power consumption 90

Connection

41-232

Brown Blue L

Red

41-232

Brown Blue L

Brown

Brown Blue

Red

230 V ± 10 % 50 Hz 0.8 W

Output Relay contact NO, µ 10 A, 250 V, cos ϕ = 1 Starting peak 80 A / 20 ms Compensation capacity 140 µF Load Incandescent lamps Blue Red Fluorescent tubes, not compensated N Tungsten-halogen lamps (230 V)

Performance Detection angle 180º Detection range 41-232AN/41-232 0–11/14 meter Time delay 8 sec...30 min Lux range 5...∞ lux Protection class IP 54 Insulation class Class II Ambient temperature -20° C...+45° C Cable entry 2 x ø12.5 bushes fitted Colour 41-232 white, Ral 9010 41-232/AN antracit, Ral 7016 Material UV-resistant ASA-plast Approvals CE according to

Detection range

2300 W 1200 VA 2300 W

EN 60669-2-1

180°

The detector has an integrated light sensor, which guarantees that the lighting is only switched on when detecting people in motion and the daylight level (lux level) is below the preset level. The lighting remains switched on as long as moving people are detected. The detector’s integrated timer is used to set the required time delay, which ensures that the light remains on for a period after the last person has left. Recommended installation height: 2-3 m. At 2.5 m the detector has a range of 14 m over 180°. A switch can be integrated if manual activation is required. The button must be activated for >4 seconds in order for the sensor to be switched on. The detector will switch on independently of lux. The detector can be fitted directly to a wall. For ceiling installation, fitting 41-904 (accessory) must be used. The detector head can be rotated 25° (horizontally) to the right or the left. The enclosed cover can be used if you wish to screen off an area from detection.

11/14 m

Settings 12m

LUX

2,5 m

TIME

METER

Order numbers 0

30m

11/14 m

Detection range 41-232/AN Detection range 41-232

0-11 meter 0-14 meter

LUX

Product

TIME

+ METER

Motion detector white Motion detector antracit Ceiling bracket white Ceiling bracket antracit

Type

EAN no.

41-232 41-232/AN 41-904 41-904/AN

5703102 203342 5703102 205605 5703102 203885 5703102 206046 R10

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Minilux motion detector with dim (230 V) type 41-233 for outdoor lighting control

41-233

130

Technical data

Connection

Input Supply voltage Power consumption

41-233 Elect.

OK Brown Blue L

Red

180°

Load R, Incandescent lamps L, Inductive (Iron core transform.) Halogen lamps 230 V

L N

0 14 m Detection and settings

Performance Detection angle Detection range Time delay Lux range Dim Time clock Clock backup Protection class Insulation class Ambient temperature Cable entry

14 m

2,5 m

TIME ADJ.

15M

30M

DIM

14 m

BLOCKING TIME ON

BLOCKING TIME OFF

LUX

Note! Parallel connection NOT allowed!

METER

30m

TIME

EN 60669-2-1

60%

Lux Evening

40...400 W 50...200 VA 40...300 W

180º 0–14 meter 10 sek...30 min 5...∞ lux 20%...60% 24 hours approx. 4 hours IP 54 Class II -20° C...+45° C 2 x ø12.5 bushes fitted

Approvals CE according to

16H

CLOCK

20%

230 V ± 10 % 50 Hz 0.7 W

Morning

• 230 V connection • Dim function for increased comfort • Integrated clock function for night blocking • Detection range 180° • Detection range 14 meters • Time delay up to 30 mins. • Setting of Dim, lux, time and meters below hidden cover • Facility for ceiling installation • Facility to block detection range The detector’s integrated light sensor measures the daylight level continuously. If the daylight level falls below the preset level (LUX), the detector switches on the light. The light is switched on at the present dimmer level (DIM), and at the same time the detector becomes sensitive to movement. If the detector registers movement, the light level increases to max. When the detector no longer registers movement, the light remains at the max. light level for the preset time (TIME). The light is then dimmed once more. When the integrated light sensor registers that the daylight level is higher than the preset level (LUX), the detector switches off the light. If the light is switched on to max. via PIR, the light is only switched off when the preset time (TIME) has expired. The detector has an integrated clock function that allows the light to be switched off (blocked) for a predefined period, e.g. at night. During this period the detector will still switch on the light at max. light level if it registers movement.

Luxniveau 70 lux

18:00

23:00

06:00

08:00

Time

Lighting Control Blocking

On Off

Movement

Light

On Dim Off

Order numbers Product

Motion detector dim Ceiling fitting

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type

41-233 41-904

EAN no.

5703102 203359 5703102 203885

Product data

Dimensions

Minilux control for switching on and off the light automatically. Programming via LCD display

36-080 54

• 1st priority: movement sensor 2nd priority: daylight • 230 V AC • LCD display • 3 lux ranges • Test function • Possibility of manual functions

Connection - outdoor lighting control

Technical data 41-262

Lux

PIR

0-10V

Input Supply voltage Load

Push button for switching on NPN

Energy-saving off (optional)

Power consumption Signal from light sensor

PIR 2

Lux Lux range on

App In

Minilux Control

36-080

NPN

Output Relay contact Starting peak Compensation capacity Output voltage Ripple

Off delay Test

Out

Mode

Set +

Test

Set -

3...270 Lux (3...300) 30...2.700 Lux (30...3.000) 300...27.000 Lux (300...30.000) Tolerance of lux range ±10 % Hysteresis 10 % Time delay 0-60 min Protection class IP 20 Insulation class Class II Ambient temperature +5° C ... +50° C

36-080

Display

Approval CE according to

Products for this function: 36-080 + 41-262 + 41-902 Minilux 36-080 Control switches on the light immediately after a power failure for one minute, and on startup. Possibility of manual switch off (Save switch) via push button. In test mode the lighting is switched on for 5 seconds everytime there is activity from the movement sensor. The product is also for indoor lighting control. Sensor PIR with or without built-in light sensor is available.

EN 60669-2-1

Minilux Control

Lux Lux range on

Off delay Test

App In

Out

Mode

2300 W 1200 VA 500 W

Performance Lux range

NO, µ10 A, 250 V AC 80 A / 20 ms 140 µF 24 V DC ± 10 % max. 0,5 Vpp

Load Incandescent lamps Fluorescent tubes, not comp. Halogen incandescent lamps 230 V

230 V ± 10 % 50 Hz max. 40 mA (not short circuit-proof) 1.9 VA 0-10 V

Function The lighting will only be switched on when the movement sensor is activa-ted, and only if the light sensor measures insufficient daylight. The lighting will be switced off after the cut off delay of the control has elapsed.

Set +

Order numbers Product

Minilux Control

Test 22

Set Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type

36-080

EAN no.

5703102 203298 Outdoor R4

Product data

Dimensions

Minilux motion detector for outdoor lighting control with built-in light sensor

41-262/272 34

109

41-262

41-902

Technical data

Detection range

Input Supply voltage Power consump.

V°

41-262 / 41-272

Output Current load Output signal Output voltage Lux

Meter

M 15 7,5 4

3 1,5

V 0° 5° 10° 20° 45°

10 m

15 m

24 V DC ±10 % 40 mA 50 mA (24 V DC) On/Off, NPN 0-10 V

Performance Detection angle Detection range Lux range (41-262 only) Protection class Protection class with cover 41-902 Cable entry Cable lenght

90° 0,5...15 m 3...300 lux IP20 IP54 2 x Ø 5 mm Max 200 m 2 x 2 x 0,6 mm -20° C...+50° C

Ambient temperatur 10 m

Lux

PIR

15 m

Connection

41-262

PIR

Lux Lux range on

If you with to connect more than one motion detector, please use type 41-272 which is the same detector just without the built-in light sensor. Master Slave

Off delay Test

App In

2,5 m

The detectors are supplied with brackets for ceiling and wall installation.

Minilux Control

36-080

The built-in light sensor blocks off lighting in the daylight hours if there is sufficient daylight. The lux level is set on the Minilux Control.

For outdoor installation the cover 41-902 must be used.

15 m 2

After connection to the power supply, motion detectors are ready for operation after 1-2 min. (power-up time).

NPN

0-10V

The Minilux motion detector 41-262 is used in combination with Minilux Control 36-080 for outdoor lighting control.

41-262 41-272

Lux

Minilux motion detector 41-262 is a passive infrared detector which react to temperature changes and movements by people (and cars).

NPN

0-10V

• 24 V DC • Sensitivity setting • Up to 8 detectors on one control • Built-in walk-test function • 90° detection range • Detection lenght up to 15 meter

Out

36-080 Minilux Control Set + Mode Lux Lux Off range on

delay Test

Test App In

Set +

1 Test2

3Set -

36-080

Set Out

Mode

C 3

Sensitivity setting

Normal

Parallel connection Lux

Max. 1

2 1

3 2

PIR

0-10V

4 3

PIR 1

2 1

Order numbers

NPN NPN

PIR NPN

Min.

41-272

Lux 0-10V

NPN

41-262

Product

Max 8 Use only one detector with built-in light sensor

Detector Detector IP54 Cover

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type

41-262 41-272 41-902

EAN no.

5703102 203229 5703102 203564 5703102 203458 R2

Notes

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Indoor

Indoor lighting control

Product guide indoor

Big motions

Mouting wall/Ceiling

In particular suitable for

10 m

9 m²

140 m²

  

Ceiling

Large room

41-302 5703102 203922 34 24 008 850

10...1.000 lux 1...30 min.

1x2.300 W 140 µF

PIR

360°

10 m

9 m²

140 m²

  

Ceiling

Canteen Corridor Staircase Large room

41-320 5703102 201072 34 24 008 669

10...1.000 lux 1...30 min.

2x2.300 W 140 µF

PIR

360°

10 m

9 m²

140 m²

  

Ceiling

Toilet Locker room Corridor

41-330 5703102 201195 34 24 008 643

10...1.000 lux 1...30 min.

2x2.300 W 140 µF

PIR

360°

10 m

9 m²

140 m²

  

Ceiling

Class room Small office

41-350 5703102 205995 34 67 001 348

50...1.500 lux 1...30 min.

PIR

360°

10 m

9 m²

140 m²

    (*) (**)

Ceiling

Class room

41-351 5703102 206008 34 67 001 351

50...1.500 lux 1...30 min.

1x2.300 W 140 µF

PIR

360°

10 m

9 m²

140 m²

    (*) (**)

Ceiling

Office

41-400 5703102 203601 34 67 000 174

30...2.000 lux

5 sek....30 min.

1x2.300 W 140 µF

PIR

360°

12 m²

38 m²



Ceiling/ flush mounting

Small room

41-800 5703102 206077 34 24 008 973

10...1.000 lux 1...30 min.

PIR/ Ultrasound

360°

66 m² (ultrasound)

138 m² (ultrasound)

  

Ceiling/ flush mounting

Communal room Conference room

PIR/ Ultrasound

360°

66 m² (ultrasound)

138 m² (ultrasound)

Ceiling/ flush mounting

Communal room Conference room

41-802 5703102 206084 34 24 008 986

Constant on/off

Motion < 10 cm

360°

Aut. on/off

Detection range

PIR

Manual off

Detection angle

1x2.300 W 140 µF

Manual on

Technology

10...1.000 lux 1...30 min.

Time delay

41-300 5703102 201065 34 24 008 672

Presence and motion detectors 230 V AV

Light sensor

Output data

230 V AC Stand-alone detectors



(Only off)

 

* Manual function = only automatically off ** Manual function = only constant off Automatic function = not possible for constant on/off

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product guide indoor

24 V DC system components

Mounting wall/ceiling

Accessory 78-0X0

Accessory 78-983

(230 V AC)

20 m²

Wall/ Ceiling



41-272 5703102 203564 34 24 008 818

NPN

90°

15 m

175 m²

Wall



41-274 5703102 203571 34 24 008 821

NPN

90°

9 m²

Ceiling



30 sek.... 5 min.

Relæ

90°

15 m

175 m²

Wall



1...30 min.

1xrelæ

360°

10 m

9 m²

140 m²

Ceiling



41-440 5703102 204004 34 67 000 145

360°

12 m²

38 m²

Ceiling/ flush mount.



41-445 5703102 204011 34 67 000 158

360°

12 m²

38 m²

Ceiling/ flush mount.

41-279 5703102 204318 34 67 001 018

41-340 5703102 201201 34 24 008 656

30...3.000 lux

41-549 5703102 204547 34 67 001 021

Big motions

90°/ 40°

Motion < 10 cm

NPN

Time delay

41-270 5703102 203540 34 24 008 795

Light sensor

Detection range

(230 V AC)

Detection angle

Presence and motion detectors 24 V DC

Output, NPN/0-10 V

Accessory 36-080

Accessory 41-981 (230 V AC)



5 sek... 60 min.

1xrelay

360°

12 m²

38 m²

Ceiling



 

43-225 5703102 005724 34 24 008 533

10...1.000 lux

8... 40 min.

2xNPN 1xrelay

360°

12 m

90 m²

200 m²

Ceiling



43-197 5703102 203311 34 67 000 022

3...300 lux 30...3K lux 300..30 klux 600..60 klux

0-10 V

Wall/ Ceiling



Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Control for switching on and off the light automatically. Programming via LCD display

36-080 54

• 1st priority: daylight 2nd priority: movement sensor • 230 V AC • LCD display • 3 lux ranges • Test function • Possibility of manual functions

Connection- indoor lighting control Safeswitch (optional) 41-272 PIR

Technical data

Lux 0-10V

NPN 1

Push button for switching on (optional)

43-197

Input Supply voltage Load

Power consumption Signal from light sensor

PIR 2

Lux Lux range on

Off delay Test

App In

Out

Mode

Set +

Test

Set -

Lux

Minilux Control

36-080

Output 0-10V Relay contact Starting peak Compensation capacity Output voltage Ripple

NPN

NO, µ10 A, 250 V AC 80 A / 20 ms 140 µF 24 V DC ± 10 % max. 0,5 Vpp

Load Incandescent lamps Fluorescent tubes, not comp. Halogen incandescent lamps 230 V

2300 W 1200 VA 500 W

Performance Lux range

230 V ± 10 % 50 Hz max. 40 mA (not short circuit-proof) 1.9 W 0-10 V

Display

36-080

Approval CE according to

Products for this function: 36-080 + 41-272 + 43-197 The Control 36-080 switches on the light immediately after a power failure for one minute, and on startup. You can change function from automatic on to manual on by placing a jumper between øC3 and øC2 and by connecting a push button. Possibility of manual switch off (Save switch) via push button. In test mode the lighting is switched on for 5 seconds everytime there is activity from the movement sensor. Enclose the product you will find a calculation form, which you can use for correct setting and as documentation by projects. The product is also for outdoor lighting control.

EN 60669-2-1

Minilux Control

Lux Lux range on

Off delay Test

App In

Out

Mode

Function The lighting will only be switched on when the movement sensor is activa-ted, and only if the light sensor measures insufficient daylight. If there is sufficient daylight the sensor will switch off the lighting after 1 min., even if the controller’s cut off delay has expired.

Order numbers

Set +

Product Control

Type

36-080

EAN no.

5703102 203298 Indoor R3

Test

Set - A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com Servodan

Product data

Dimensions

Control On/Off, 24 V DC, 1-3 channels

78-000 60 50 70

29,2

Optimal daylight control with zone-based light control – Energy saving up to 60 % • Standard pre-programmed from factory • 5 pre-programmed applications • Settings via the display • Choose 1, 2 or 3 zones • Topical light level in display

60 50

29,2

Technical data Input Power supply

24 V 41-272

43-197

PIR

LUX

24 V DC ±10 % SELV Via RJ 12-1 45 mA

Application example (See more overleaf)

Power consumption Output Load

Control On/Off 78-000 Luxstat control On/Off 78-000

Connected via Power Pack 78-983 NPN 24 V, ≥ 25 mA Max 40 mA Via RJ 12-1

Output signal CH1-2-3 Connected via Power Pack 78-983

Performance On delay (Lux) Off delay (Lux) Off delay (PIR) Hysteresis Protection class Ambient temperature

Buswires

0-60 sek. 0-60 min. 1-60 min. 10-80 % IP 20 5° C...50° C

Approvals CE according to

78-901 Buswire with adapter

EN 60669-2-1

Control 78-000 is intended for indoor lighting control from one to three zones. The controller is pre-programmed for several standard applications. One light sensor, a 4-push button switch, movement and presence sensors can be connected to the controller. The controller automatically detects connected devicess. A 78-983 type Power Pack can be used as a power supply (SELV) for the controller. In the Power Pack there are three relay outputs for 230 V. Bus-wire 30 cm is enclosed controller, 78-000. More information on www.servodan.com

78-902 Buswire

Application table Light sensor 43-197

Movement sensor

Push button switch Push button switch by door by black-board

Time switch

4-push button switch 74-592

App.

Auto

00.01

Auto

Energy-saving switch

I/O

I/O Auto

01.01

I/O

02.01

03.01

Auto I/O

* *

I/O

* Optional

Auto

04.01

Order numbers Produkt

Control On/Off Bus-wire adaptor Power Pack Light sensor 4-push button PIR movement sensor

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type

78-000 78-901 78-983 43-197 74-592 41-272

EAN nr.

5703102 201348 5703102 201638 5703102 201379 5703102 203311 5703102 201461 5703102 203564

Product data

Application 00.01 E.g. Corridors/Halls (factory setting)

43-197

41-272

24 V

PIR

LUX

Control On/Off 78-000 Luxstat control On/Off 78-000

• 3-zone daylight control • Automatic on/off via movement sensor

LUX

41-272

43-197

PIR

LUX

• 2 channel daylight control on/off, 1 channel on/off • Manual on/off, automatic off via movement sensor Function description: www.servodan.com

Connected via Power Pack 78-983

Push button 74-593

Application 04.01 E.g. Production premises

43-197

24 V

LUX

• 3-zone daylight control • Manual on/off via an external time switch Control On/Off 78-000 Luxstat control On/Off 78-000

Connected via Power Pack 78-983

Function description: www.servodan.com

Connected via Power Pack 78-983

• 3-zone daylight control • Manual on/off • Automatic off via movement sensor Function description: www.servodan.com

Push button switch by door

4-push button switch 74-592

ØV

Push button at blackboard

Energysaving switch

Timer switch

Light sensor 43-197 PIR

Lux 0-10V

NPN

Control On/Off 78-000 Luxstat control On/Off 78-000

Application 02.01 E.g. storeroom

I/O

LUX

Auto

43-197

PIR

I/O

41-272

Auto

Push button 74-593

• 3-zone daylight control • Manual on/off • Automatic off via external timer switch

Luxstat control On/Off 78-000 Control On/Off 78-000

Function description: www.servodan.com

24 V

Application 03.01 E.g. School premises

Control On/Off 78-000 Luxstat control On/Off 78-000

Application 01.01 E.g. Exhibition premises

43-197

Push button 74-593

Function description: www.servodan.com

Connected via Power Pack 78-983

24 V

Push button 74-593

74-592

24 V

24 V ØH

Function description for factory setting Application 00.01

A 1

When the movement sensor detects activity, the 3-zone on/off daylight control is switched on. As long as there is activity, the light will now be daylight-controlled in three zones in accor-dance with set parameters.

11 12

B Luxstat Power Pack

78-983

4 5

A 1

78-000

Luxstat Control On /Off

Servodan A/S 20000 Lx

230V 24V 1A µ 10A 250V

As daylight incidence increases, the light in the premises will be switched off depending on the set levels. The light switches off automatically after a preset period when the movement sensors do not detect any movement in the coverage area.

RJ12-1 6 polet

RJ12-2 6 polet

D 1

Option for manual on/off via switch. RJ 12

www.servodan.com L1 L2 L3 N

2 3

CH 1

CH 2

CH 3

NPN 24V, ≥ 25mA Max 40 mA

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Luxstat Control DIM 24 V DC, 1-3 channels

78-050 60 50 70

29,2

Optimal daylight control with zone-based light control Energy saving up to 75 %

60 50

29,2

Technical data

41-272

43-197

PIR

LUX

24 V

Input Power supply

Application example (See more overleaf)

24 V DC ±10 % SELV Via RJ 12-1 85 mA

Power consumption

Output Load Connected via Power Pack 78-983 Output signal CH1-2-3 NPN 24 V, ≥ 25 mA Max 40 mA Via RJ 12-1 Output signal to HF CH1-2-3: 1-10 V/50 mA Output signal 1-10V minimum: 1-4 V Output signal 1-10V maximum: 6-10 V

Luxstat control DIM 78-050

Connected via Power Pack 78-983

Elect. Ballast / Light Dimmer 1 - 10V

Performance Off delay (Lux) Off delay (PIR) Ramp time Energy saving (Loadshed) Protection class Ambient temperature

Buswires

78-901 Bus-wire with adaptor

0-20 min/∞ 1-60 min. 5-60 sek. 0-10 V IP 20 5° C...50° C

Approvals CE according to 78-902 Bus-wire

EN 60669-2-1

Input RJ12-2: Not to be used! Intended for updating software.

• Standard pre-programmed from factory • 5 pre-programmed applications • Programmed via the display • Measures the daylight automatically • Input for energy saving • Choose 1, 2 or 3 zones • Topical light level in display The Luxstat Control DIM 78-050 is intended for indoor lighting control from one to three zones with dimming. The Luxstat Control DIM is pre-programmed for several standard applications. One light sensor, a 4-push button switch and movement sensors can be connected to the Luxstat Control DIM. The controller automatically detects connected devices. The load shedding capability can reduce light level during critical periods. A 78-983 power pack is used as the voltage supply (SELV) for the Luxstat Control DIM, and to control outputs. Bus-wire 78-902 is delivered with control 78-050. Bus-wire 78-901 with terminal screw connections is not included.

Application table

Light sensor 43-197

Movement sensor

Push button switch Push button switch by door by black-board

Time switch

4-push button switch 74-592

Energy-saving switch

Auto

App.

I/O

10.01

Auto I/O Auto

11.01

I/O

12.01

13.01

Auto I/O

I/O

* Optional functions

Auto

14.01

Order numbers

Product

Control DIM Bus-wire adaptor Power Pack Light sensor

Type

78-050 78-901 78-983 43-197

EAN no.

5703102 201355 5703102 201638 5703102 201379 5703102 203311 R6

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Elect. Ballast / Light Dimmer 1 - 10V

43-197 LUX

24 V

Elect. Ballast / Light Dimmer 1 - 10V

41-272

43-197

PIR

LUX

24 V

Luxstat control DIM 78-050

Connected via Power Pack 78-983

Elect. Ballast / Light Dimmer 1 - 10V

43-197

PIR

LUX

Application 13.01 E.g. School premises • • • •

74-593

Application 14.01 E.g. Production premises

43-197

24 V

LUX

• 3-zone daylight control • Manual on/off • Automatic off via external time switch

Luxstat control DIM 78-050

Application 12.01 E.g. Offices/conference premises

Push button switch by door

4-push button switch 74-592

ØV

Function description: www.servodan.com

Elect. Ballast / Light Dimmer 1 - 10V

Connected via Power Pack 78-983

ØV

2-zone daylight control Manual on/off Manual on/off blackboard lighting Automatic off via movement sensor

Function description: www.servodan.com

Elect. Ballast / Light Dimmer 1 - 10V

Connected via Power Pack 78-983

Function description: www.servodan.com

• 3-zone daylight control • Manual on/off • Automatic off via movement sensor

41-272

Luxstat control DIM 78-050

Function description: www.servodan.com

Application 11.01 E.g. Exhibition premises

Push button 74-593

Push button at blackboard

Energysaving switch

Timer switch

Light sensor 43-197 PIR

Lux 0-10V

NPN

Push button 74-593

• 3-zone daylight control • Manual on/off via an external time switch

Luxstat control DIM 78-050

Connected via Power Pack 78-983

74-592

24 V

• 3-zone daylight control • Automatic on/off via movement sensor

Luxstat control DIM 78-050

Connected via Power Pack 78-983

Application 10.01 E.g. Corridors (factory setting)

I/O

24 V

Auto

LUX

I/O

43-197

PIR

Auto

41-272

24 V ØH

Function description: www.servodan.com

Function description for factory setting Application 10.01

A 1

11 12

The light switches on when the movement sensor detects activity and there is a need for light. As long as there is activity, the light will now be daylight-controlled in three zones in accordance with set parameters.

B Luxstat Power Pack

78-983

A 1

78-050

Luxstat Control Dim

Servodan A/S 20000 Lx

230V 24V 1A µ 10A 250V

As daylight incidence increases, the light dims in the premises so that the set, required, minimum light level is obtained.

RJ12-1 6 polet

The light switches off automatically after a preset period, when the movement sensors do not detect movement in the coverage area, or when a sufficient light level has been achieved in the room.

D 1

RJ12-2 6 polet

RJ12-1 6 polet

D 1

Elect. Ballast Light dimmer N L1

Option for manual on/off and dimming via switch. www.servodan.com

Elect. Ballast Light dimmer N L2

Elect. Ballast Light dimmer N

1-10V Com2

1-10V Com1

1-10V Com3

L1 L2 L3 N

RJ 12

1 2 3

CH 1

CH 2

CH 3

NPN 24V, ≥ 25mA Max 40 mA

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimension (mm)

Luxstat Control DALI for 3-zone daylight-based lighting control with built-in power supply for DALI bus communication.

78-055

60 50 70

29,2

Cut off function via Luxstat Power Pack.

Technical data

Application example (See more overleaf)

24 V

41-272

43-197

PIR

LUX

Input RJ12 – 1: Pin 1 og 2 Pin1 Supply Pin2 Supply Pin3 I/O Pin4 Ch1

24 V DC +/- 10 % (SELV) + Open connection NPN 24 V / 25 mA Short circuit proof NPN 24 V / 25 mA Short circuit proof NPN 24 V / 25 mA Short circuit proof

Pin5 Ch2 Pin6 Ch3

RJ12 – 2: For update of software. May not be used.

Luxstat Control DALI 78-055

Connected via Power Pack 78-983

DALI ballast via 2-wired DALI bus: DALI0 V DC + communication DALI+ +15 V DC +/- 20 % + communication

DALI

Power consumption Ambient temperature Protection class Dimension

85 mA 5°…50°C IP20 Width 70 mm Height 55 mm

Approval CE according to

EN 60669-2-1

• With built-in DALI power supply • Easy handling of DALI, ID adresses – up to 64 individually adresseable DALI units • Choose between 5 pre-programmed applications • Easy setting via display – with no use of a pc • Input for energy-save • Choose between 1, 2 or 3 zones • Actual lux level is shown in display Luxstat Control DALI 78-055 is designed for indoor daylight-based lighting control for up to three zones with individual dim in each zone. Luxstat Control DALI contains five standard applications that are easily selected via the display on the front. A light sensor, push-button and movement sensors can be connected to the Luxstat Control DALI directly. The DALI bus is also connected directly to the Controller. As supply voltage (SELV) for Luxstat Control DALI a Power Pack type 78-983 is used. Load shedding The feature allows you to reduce light levels at critical periods (guided re-duction of power consumption).

Connection 78-983 Power Pack

78-055 Luxstat Control DALI RJ12

RJ12 BUS

Bus wire 78-902 is included with the controller.

230V Ch 1 Ch 2 Ch 3 L N D1 D2 D3 D4 D5 D6 D7 D8

DALI -

+ DALI

N L L1

Z1 N

Order numbers Product

Luxstat Control DALI Luxstat Power Pack

Type

78-055 78-983

EAN no.

5703102 205186 5703102 201379 R0

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

41-272

43-197

PIR

LUX

24 V

74-593

• 3-zone daylight control • Automatic on/off via movement sensor

Luxstat Control DALI 78-055

Connected via Power Pack 78-983

74-592

Application 30.01 E.g. Corridors (factory setting)

24 V

Connected via Power Pack 78-983

Application 31.01 E.g. Exhibition premises

24 V

Connected via Power Pack 78-983

74-593

Connected via Power Pack 78-983

41-272

43-197

PIR

LUX

Luxstat Control DALI 78-055

Connected via Power Pack 78-983

24 V

2-zone daylight control Manual on/off Manual on/off blackboard lighting Automatic off via movement sensor

Application 44.01 E.g. Production premises

LUX

• 3-zone daylight control • Manual on/off • Automatic off via external time switch

Luxstat Control DALI 78-055

DALI

Application 33.01 E.g. School premises • • • •

43-197

24 V

• 3-zone daylight control • Manual on/off via an external time switch

Luxstat Control DALI 78-055

LUX

DALI

74-593

LUX

43-197

PIR

Luxstat Control DALI 78-055

DALI

43-197

41-272

DALI

Application 32.01 E.g. Offices/conference premises • 3-zone daylight control • Manual on/off • Automatic off via movement sensor

DALI

Function description for factory setting

ØV

I/O

Lux

Auto

PIR

24 V

ØV

Pushbutton at black- Time switch board

Energy save contact

0-10V

NPN

Pushbutton at door

Light sensor 4 push-button 43-197 I/O

Movement sensor 24 V DC

Auto

Application 30.01

ØH

B9 B10 B11 B12

Board

Time switch Energy save

Door

I/O

A9 A10 A11 A12 B1 B2 + + 24V DC 24V DC

Auto

I/O

PIR

Option for manual on/off and dimming via switch.

LUX

The light switches off automatically after a preset period, when the movement sensors do not detect movement in the coverage area, or when a sufficient light level has been achieved in the room.

Auto

As daylight incidence increases, the light dims in the premises so that the set, required, minimum light level is obtained.

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

50 70

29,2

Dimensions

Luxstat Power Pack power supply for Luxstat Controls

78-983 60 50

29,2

• Power supply: 230 V AC • Secondary: 24V DC ±10 %, max. 1A • Built-in protection against overload • For DIN rail installation

Technical data Input Power supply Power consumption Input CH1-2-3

Ch 3

Ch 2

Ch 1

24V DC

Connection

+ 1

11 12

Luxstat Power Pack

78-983

230V 24V 1A µ 10A 250V

RJ12-1

The Power Pack 78-983 is mainly used as a power supply and relay module for the Luxstat Control 78-0X0.

RJ12-2

RJ12-3

RJ12-4

Output Relay contact NO, µ10 A, 250 V AC Max load CH1-2-3: Incandescent lamps 2.300 W Fluorescent tubes, not comp. 1.200 VA Compensation capacity 140 µF Max. starting peak 80 A / 20 ms Output voltage (SELV) 24 V DC ±10 % max. 1A Performance Protection class Ambient temperature

L1 L2

Approvals CE according to

L3 N

230 V 50 - 60 Hz 1.2 W NPN 24 V, ≥ 25 mA Low level ≤ 2 V

Connects to a Luxstat Control using an RJ12 adapter (supplied with the Luxstat Control). The built-in protection is activated when an overload occurs. This protection is reset on power down. The power supply can be loaded with a maximum of 1 A. An LED on the front of the unit illuminates when 230 V is connected. NPN movement sensors can be connected directly to the Power Pack.

IP 20 -10° C...+50° C EN 60669-2-1

Connection Input Power supply 230 V AC

Output

D1, D2

Output voltage 24 V DC

B1, B2

CH1

B4, B1, B2

D3, D4

CH2

B5, B1, B2

D5, D6

CH3

B6, B1, B2

D7, D8

RJ12 - 1 For connection of Luxstat Control 78-xxx only Pin1 + 24V DC ±10% (SELV) Pin2 - 24V DC ±10% (SELV) (ground) Pin3 I/O Not used. Pin4 Ch1 NPN 24V, ≥ 25mA Pin5 Ch2 NPN 24V, ≥ 25mA Pin6 Ch3 NPN 24V, ≥ 25mA

RJ12 - 2 / RJ12 - 3 / RJ12 - 4 connections: Pin1 + 24V DC ±10% (SELV) Pin2 - 24V DC ±10% (SELV) (ground) Pin3 I/O Not used. Pin4 Ch1 (RJ12-2) NPN 24V, ≥ 25mA (Input for control) Pin4 Ch2 (RJ12-3) NPN 24V, ≥ 25mA (Input for control) Pin4 Ch3 (RJ12-4) NPN 24V, ≥ 25mA (Input for control) Pin5 Not used. Pin6 Not used.

Order numbers Product

Power Pack Bus-wire adapter

Type

78-983 78-901

EAN no.

5703102 201379 5703102 201638 R4

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

74-592

Technical data

4-push button switch for Luxstat Control 78-0XX

4-push button, Opus

For flush mounting Dimensions Protection class Voltage Power consumption

Model OPUS 66 x 66 mm IP 20 5-24 V DC Max. 24 mW/diode @ 24 V DC Cable dimension single core Ă&#x2DC; 0,3 to 0,6 mm multi core Ă&#x2DC; 0,4 to 0,8 mm Looping Max. two of the same dimensions For plate mounting, mounting plate type 74-589 is used.

Order numbers Product

4-push button, Opus Mounting plate, white

Type

74-592 74-589

EAN no.

5703102 201461 5703102 005106 R3

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Luxstat control box for 2 zone control with potential free relay, 230 V AC

77-050 202

145

• Luxstat control box for controlling 1-10V, potential free relay and built-in IR-receiver • External units like sensors, push-buttons, luminaires etc. are connected directly to the Luxstat • Easy mounting and installation directy in the room – no connection to distribution boards

Technical data

Connection

230V~

Input Supply voltage 230 V AC 50 Hz ±10 % Power consumption 0.9 W Output Relay zone 1 and 2 NO, µ 10 A Relay On/Off NO, µ 10 A Load: Incandescent lamps 2300 W Fluorescent tubes, not compensated 1200 VA Halogen incandescent lamps 2300 W Energy-saving lamps 58 pcs. (18W) Max. compensation capacity 140 µF Max. starting Peak 80 A/20 m sec. Secondary voltage 24 V DC Max. load 100 mA

230V~ 230V~

+ -

RJ12 ø10 ø9 ø8 ø7 ø6 ø5 ø4 ø3 ø2 ø1 ø12 ø11 L’ N L’ N L N DC DC External Relay IR Sensor Zone 1 Zone 2 On/Off

Luxstat DIM w. IR 77-050

ø13 + 24V DC ø14 ø15 Lux ø16 PIR ø17 Pushbutton 1 ø18 Pushbutton 2

230 V~ ±10% 50 Hz µ 10A

IP20

2300 W 1200 VA

77-050 Luxstat DIM w. IR

Zone 1

Zone 2

230V

ø10 ø9 ø8 ø7 ø6 ø5 ø4 ø3 ø2 ø1

+ L’ N Elect. ballast Light Dimmer

+ L’ N L N Elect. ballast Light Dimmer

DC -

Relay On/Off ø12 ø11

DC +

Performance Zone 1 + 2 DIM Off delay (PIR) Lux range Light sensor Indoor Setpoint Protection Enclosure Ambient temp.

1-10 V / max. 10 mA 1-60 min. 30-3000 Lux 50-1000 Lux 50-1500 Lux ClassIP 20 Class II -5° C...+50° C

Approvals CE according to

EN 60669-2-1

Principle

The Luxstat controller, type 77-050, consists of an integrated unit containing 1-10 V control, a potentialfree relay and an integral IR receiver. All external units, such as motion sensors, push-buttons, light sensors and luminaires are connected directly to the Luxstat unit, which can be wall-mounted directly in the room. If the Luxstat unit is installed above a false ceiling, it can be connected to an external IR receiver, type 77-910 (optional) via an RJ12 plug so that an IR remote control, type 77-920 (optional) can be used. The Luxstat control box can be installed and operated using the factory settings for 2 zones and 3 applications: • Manual switch on/off via push-button – automatic switch off via movement sensor • Automatic switch on/off via movement sensor • Class room solution with manual switch on, aut. switch off. 1 or 2 push-buttons can be used optional. Using 2 push-buttons enables switching off the light in zone 1 and 2 individually. Possibility for manual dim via push-button. The controller also contains a potential-free relay for controlling ventilation, CTS or similar. All connections are made directly to the controller, which contains a 24 V DC power supply for sensors. Alle Servodan 24 V DC movement sensors can be connected.

Light sensor 43-197 DIM 1-10 V + 230 V DIM 1-10 V + 230 V Pot.free relay, pre-set to off delay + 10 min.

PIR sensor, 24V 77-050

Push-button 24 V

77-910

Order number

230V AC

Product 77-920

Luxstat control box External IR receiver IR-remote

Type

77-050 77-910 77-920

EAN no.

5703102 204523 5703102 205049 5703102 204691 R3

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

External IR receiver

77-910

• For connection to Luxstat control box 77-050 The IR receiver is eqipped with a RJ12-plug, which can be connected directly to the Luxstat controller, 77-050.

If the Luxstat unit is installed above a false ceiling, it can be connected to the external IR receiver in order to set the Luxstat controller.

Technical data Dimension Diameter Depth Mounting whole in ceiling Cable length

Ø38 mm 47 mm Ø32-35 mm 100 cm

Order number: Product

External IR receiver

Type

77-910

EAN no.

5703102 205049 R1

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Luxstat Wireless Control type 79-050

79-050 36

112

143

• Daylight-based lighting control of up to 3 zones and with the possibility of division up to 5 areas • Wireless communication between sensors, pushbuttons and luminaires • Wireless installation via laptop, USB-stick and userfriendly Windows software

Input Supply voltage Power consumption

24 V DC ± 10 % 85 mA

Output Terminal for cut-off signal Load

CLR

LRN

+ - Wired PIR sensor PIR

Power supply 24V DC

+ - Light Sensor Lux

Technical data

Connection

- ø1 24 VDC + ø2 Lux ø3 Cut-off ø4 PIR ø5

max. 40 mA

Performance Receiver

EnOcean RCM 130, standard protocol 868 MHz and wireless 2.4 GHz Transmitter Wireless 2.4 GHz Transmission (free field) 50 metres LED indicator For received “learn” signal Enclosure class IP 20 Insulation class Class II Ambient temperature -5° C to +50° C

Luxstat LED Control 79-050 24 VDC Freq.: 868,3 MHz / 2,4 GHz IP20

Can be used with following luminaires

Approvals EnOcean approval

• 1-colour LED • 4-colour LED (RGB-W)

See www.servodan.dk

• 1-10 V-signal (1-10 V ballast) • On/off (standard ballast)

The Luxstat Wireless Control contains 5 pre-set applications and 1 user-defined application, which easily can be set via the menu in the Basic installation software. 20.1 Hall areas Daylight control in 3 zones On/Off via movement sensor 21.1 Exhibition room Daylight control in 3 zones On/Off via wireless push-button or another wireless transmitter, i.e. clock-signal 22.1 Office/conference room Daylight control in 3 zones Manual On/Off – Off via movement sensor 23.1 Classrooms Daylight control in 2 zones Manual On Manual On/Off of blackboard light Off via movement sensor 24.1 Manufacturing premises Daylight control in 3 zones On/Off via wireless push-button Off via push-button or another wireless transmitter, i.e. clock-signal 25.1 User-defined Can be set to: Daylight control in 3 zones Division of rooms in up to 5 areas Optional function for push-button and movement sensor

Principle LED Luminaire, wireless with Servodan luminaire control

Light sensor, wired 230 V

230 V

79-050

and/or

PIR sensor, wired

Order numbers Product

Dim – On/Off

PIR sensor, wireless

1-10 V

L’

24 V DC 230 V

Push-button, wireless

230 V

Cut-off control, wireless, for luminaires 79-210

230 V

Luxstat wireless controll Luxstat wireless cut-off control Luxstat power supply Luxstat repeater Luxstat USB-stick Luxstat basis software

Type

EAN no.

79-210

5703102 204844

79-985

5703102 205193

79-986 79-930 79-990

5703102 205209 5703102 204639 5703102 204684

79-050

5703102 204592

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Luxstat Wireless Cut-off Control type 79-210

79-210 36

112

143

• Wireless communication with Luxstat Wireless Control type 79-050 • Luminaires are connected directly til Luxstat Cut-off control • Wireless installation via laptop, USB-stick and userfriendly Windows software.

Technical data

Connection

230V AC In

230V AC Out

1-10V out to Elect. ballast or Light Dimmer

Input Supply voltage Power consumption

ø1

ø4

ø2 L

N ø5

ø3 N

L’ ø6

Luxstat Cut-off Control 79-210

L-N 230V 50Hz 1-10V µ, 10A + Freq.: 2,4 GHz 2300W / 1200VA IP20

ø7 ø8

230 V AC 50 Hz ±10 % <3 W

Output Relay contact NO, µ 10 A Load Incandescent lamps 2300 W Fluorescent tube uncompensated 1200 VA Halogen incandescent lamps 2300 W Max. compensation capacity 140 µF Energy-saving lamps 58 pcs. (18 W) Max. starting peak 80 A/20 m sec. DIM 1 - 10 V / max. 50mA Performance Receiver RF range Enclosure class Insulation class Ambient temperature Approvals CE pursuant to

Wireless 2.4 GHz 30 metres IP 20 Class II -5° C to +50° C. EN 60669-2-1

The Luxstat Cut-off Control 79-210 is used together with the Luxstat Wireless Control (79-050) controls for indoor daylight-based lighting cntrol in 1 or more zones. If daylight control is needed in 1 or more zones, 1 Luxstat Cut-off control is used per zone. If the room needs divided in up to 5 areas, 1 Luxstat Cut-off control is used per area. The Luxstat Cut-off control is used for controlling luminaires equipped with ballast, 1-10 V ballast for dim or standard ballast for On/Off control. The Luxstat Cut-off control can supply luminaires with 230 V and control signal 1-10 V. If standard ballast for On/Off control is connected only the relay output on the Luxstat Cut-off control is used. If 1-10 V for dim control is used, the 230 V supply for the luminaires is disconnected (Cut-off), when the light is dimmed to minimum. Every Luxstat Cut-off Control can operate up to 100 luminaires (1-10 V signal).

Principle Zone 1

Dim: 1-10 V On/off: 230 V

Zone 2

Dim: 1-10 V On/off: 230 V

Zone 3

Dim: 1-10 V On/off: 230 V

79-050 79-210

230 V

79-210

230 V

79-210

230 V

Order number Product

24 V DC

Luxstat wireless cut-off control

Type

79-210

EAN no.

5703102 204844 R1

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Description

79-930

The Luxstat USB-stick enables you to perform installation and configuration of the components in the Luxstat wireless lighting system on site after having installed and connected the various components - controllers, luminaires, sensors, push-buttons etc.

Luxstat USB-stick

Order numbers Product

Luxstat USB-stick

Description

79-990/79-995

The basic installation software enables you to configure the Luxstat wireless lighting system according to a range of standard applications. With the service softwaren you can change the factory settings and adjust the • function settings for push-buttons • function settings for PIR sensor • energy-save settings – reducing the light level with 0-100 % • comfort light settings between 0-100 % etc.

Technical data

EAN no.

5703102 204639

Order numbers Product

Type

EAN no.

79-995

5703102 205063

79-990

5703102 204684

Power Supply for Luxstat Wireless Controller

Power supply, 24 V DC/200 mA Supply voltage Output voltage Load Ambient temperature Protection class

79-930

Luxstat Installation Software – Basic & Service

Luxstat basic software Luxstat service software

79-985

Type

230 V ~ ±10 % Norm. 24 V DC 200 mA +5° C...+50° C IP 20

Order numbers (112 x 143 x 36 mm)

Product

Power supply

Technical data

79-986

79-985

EAN no.

5703102 205193

Luxstat Repeater

Repeater, 24 V DC/200 mA Supply voltage Output voltage Load Ambient temperature Protection class RF range in buildings

Type

230 V ~ ±10 % Norm. 24 V DC 200 mA +5° C...+50° C IP 20 30 m

Max. 2 repeaters in a system

Order numbers

(112 x 143 x 36 mm) Max. 30 m

79-050

Max. 30 m

79-986

Max. 30 m

79-986

Product 79-210

Luxstat repeater

Type

79-986

EAN no.

5703102 205209 R1

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Motion detector for indoor lighting control. For flush mounting and plate mounting.

41-270

• 24 V DC • Can be wired as for low-voltage • The front cover determines the detection range • Mounting at the ceiling and on the wall

Connection

PIR

41-270

NPN 1

Input Supply voltage Power consump.

24 V DC ±10 % 40 mA

Output Current load Output signal

50 mA (24 V DC) On/Off, NPN

Minilux Control

36-080

Motion detector 41-270 is a passive infrared detector which responds to temperature changes and movements by people.

Technical data

Lux Lux range on

Off delay Test

App In

Out

36-080

Mode

Set +

Test

Set -

Performance Detection angle Detection range Protection class Cable lenght

D 3

L N

90°/40° 0,4...5 m IP20 Max 200 m 2 x 2 x 0,6 mm -20° C...+50° C

Ambient temperatur

After connection to the power supply, the motion detector is ready for operation after 1-2 min. (power-up time).

9 10

A 1

10 11 12

Luxstat Control DIM

78-050

Servodan A/S 20000 Lx

Parallel connection 41-270

78-0X0

41-270

PIR NPN

PIR

1 RJ12-1 6 polet

NPN

The bottom part can be rotated, so that it fits for mounting on the wall or at the ceiling.

The detector is adapted to the Euro-junction system.

NPN 1

If you turn the front cover 90° you get a detection range of 40°.

PIR

41-270

The detector is designed for flush mounting or mounting on a junction box (plate mounting).

RJ12-2 6 polet

D 1

Detection area

1m = 2m x 0,1m 2m = 4m x 0,2m 3m = 6m x 0,3m

1m = 0,8m x 0,1m

Order numbers

2m = 1,5m x 0,2m

Product

Type

EAN no.

Junction for: - masonry wall - sheet wall - plate mounting Bracket for 54-905

54-903 54-904 54-905 54-906

5703102 001917 5703102 001924 5703102 001931 5703102 001962

3m = 2,3m x 0,3m

4m = 8m x 0,4m

4m = 3,1m x 0,4m

5m = 10m x 0,5m

5m = 3,8m x 0,5m ~0,5m

~0,5m °

~10m / 90

~3,8m / 40

Motion detector

41-270

5703102 203540

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Motion detector for indoor lighting control

41-271

109

• • • • •

12 V DC Sensitivity setting Built-in walk-test function 90° detection angle Detection range up to 15 meter

Connection

Motion detector 41-271 without built-in light sensor, is a universal detector for 12 V DC. With NPN output.

V°

Technical data 41-262 / 41-272

Meter

M 15 7,5 4

3 1,5

V 0° 5° 10° 20° 45°

Supply voltage Output signal Detection angle Detection range Max. current load Power consump. Protection class Ambient temperatur Cable entry Cable lenght

12 V DC ±10 % On/Off, NPN 90° 0,5...15 m 50 mA (12 V DC) 5 mA (12 V DC) IP20 -20° C...+50° C 2 x Ø 5 mm Max 200 m 2 x 2 x 0,6 mm

The motion detector 41-271 is a passive infrared detector which responds to temperature changes and movements by people. The motion detector is supplied with brackets for ceiling and wall installation. After connection to the power supply, the detector is ready for operation after 1-2 min. (power-up time).

Sensitivity setting Normal

Min.

Max.

Order number: Product

Sensor PIR 12 V IP54 Cover

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type

41-271 41-902

EAN no.

5703102 203557 5703102 203458

Product data

Dimensions

Motion detector for indoor lighting control

41-272

109

• 24 V DC • Sensitivity setting • Up to 8 detetors on one Control • Built-in walk-test function • 90° detection range • Detection lenght up to 15 meter

Connection

PIR NPN

41-272

Minilux Control

36-080 Lux Lux range on

Off delay Test

App In

Out

Technical data

Mode

Set +

Test

Set -

36-080

D 3

Input Supply voltage 41-272 Power consump.

24 V DC ±10 % 40 m A

Output Current load Output signal

50 mA (24 V DC) On/Off, NPN

Performance Detection angle Detection range Protection class Protection class with cover 41-902 Cable entry Cable lenght

The motion detector 41-272 is a passive infrared detector which responds to temperature changes and movements by people.

L N

Ambient temperatur

90° 0,5...15 m IP20 IP54 2 x Ø 5 mm Max 200 m 2 x 2 x 0,6 mm -20° C...+50° C

The motion detector is used for indoor lighting control. The motion detector can be connected to Control 36-080, Luxstat Control 78-0X0 and BMS systems fx. Comlux. The motion detector is supplied with brackets for ceiling and wall installation. After connection to the power supply, the detector is ready for operation after 1-2 min. (power-up time). Detector 41-271 is 12 V DC with same specifications as 41-272.

PIR NPN

41-272 1

Setting and placement

V°

A B

9 10

A 1

10 11 12

41-262 / 41-272

Luxstat Control DIM

78-050

Meter

3 1,5

V 0° 5° 10° 20° 45°

Servodan A/S 20000 Lx

RJ12-1 6 polet

M 15 7,5 4 78-0X0

RJ12-2 6 polet

D 1

Sensitivity setting Normal

Order numbers Min.

Max.

Product

Detector, 24 V Detector, 12 V IP54 Cover

Type

41-272 41-271 41-902

EAN no.

5703102 203564 5703102 203557 5703102 203458 R2

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Motion detector for indoor lighting control in high-rise warehouses

41-274

109

• • • • • • •

Connection

41-274 NPN

PIR

36-080 Lux Lux range on

App In

Off delay Test

36-080

Out

Set +

Test

Set -

Minilux Control

Mode

Technical data

24 V DC ±10 %) 5 mA

Output Current load Output signal

50 mA (24 V DC) On/Off, NPN

Performance Detection angle Detection range Protection class Cable entry Cable lenght

Input Supply voltage Power cons.

90° Up to 9 m IP 20 2 x Ø 5 mm Max 200 m 2 x 2 x 0,6 mm -20° C...+50° C

Ambient temperatur

24 V DC Mounting height max 8 meters Sensitivity setting Up to 8 sensors on one control Built-in walk-test function 90° detection angle Detection range up to 9 meter

The detector 41-274 is a passive infrared motion detector which responds to temperature changes and movements by people. The motion detector is used for indoor lighting control - especially in high-rise warehouses. The motion detector can be connected to Control 36-080, Luxstat Control 78-0X0 and BMS systems fx. Comlux. The motion detector is supplied with brackets for ceiling and wall installation. After connection to the power supply, the sensor is ready for operation after 1-2 min. (power-up time).

Detection range

Max 8 m

1...8 sensors - op til 144 m

Walking direction

Sensitivity setting

3 Normal 4

Max 8 m.

9 m. 1 m.

9 m.

1 Min.

5 Max.

Order numbers Produkt

Motion detector

Type

41-274

EAN nr.

5703102 203571 R2

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimension (mm)

Presence detector 360° (24 V DC) for flush mounting

41-440 Ø90

• Small design and elegant finish - only Ø90 mm • 360° detection angle • Connected to a controller • More detectors can be connected • 4 sensivity settings

Detection

Depending of the type of controller connected, the detector 41-440 can control the light, based on the function chosen in the controller.

Plan view, diameter indicated at floor height (mounted at height 2,5 m)

Technical data Input Power supply Power consumption

24 V DC ±10 % 0,9 VA

Output Max current load Output signal PIR

50 mA (24 V DC) ON/OFF, NPN.

Performance Detection range Installation height Sensitivity Protection class Cable lenght

ø4m (12m2) ø7m (38m2) ø4m (12m2) ø7m (38m2)

0,8m

Diameter indicated at table height.

The maximum number of detectors 41-440 in the same system is depending of the type of controller chosen.

360°, dia. ø7-ø12 m 2.5 - 4 m 4 settings IP 20 Max 200 m 2 x 2 x 0,6 mm -5° C…+50° C

Ambient temperature Approval CE according to

EN 60669-2-1

ø3m ø3m ø5m

ø5m

Detector base, 41-905

Planning To ensure optimal detection at the entrance to the room, reduce the distance between door and detector, when positioning the detectors. Effective detection of a person is achieved at minimum 0.8 m height above floor level.

Ø90 x 43 mm

Connection: - 2 or more parallel-connected PIR sensors 41-440

Servodan Controller or similar 24V DC ±10% NPN / max. 24V / 50mA

PIR 24V DC 1

NPN

24V DC

41-440

41-440 PIR

Servodan Controller or similar 24V DC ±10% NPN / max. 24V / 50mA

PIR 24V DC 1

NPN

Connection:

Order numbers Product

Detector 24 V DC Detector base

Type

41-440 41-905

EAN no.

5703102 204004 5703102 205254 R4

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimension (mm)

Presence detector 360° (24 V DC) with built-in light sensor for flush mounting

41-445

Ø90

• Elegang design and finish • With 4 function settings • Useable for zone-based lighting control • With built-in relay for controlling i.e. CTS-system • 360° detection angle • Control via IR remote

Technical data

Detection Plan view, diameter indicated at floor height (mounted at height 2,5 m)

Input (via RJ 12) Supply voltage Power consumption Output (via RJ 12) Current load Output signal PIR RJ 12 plug: Channel 1/pin 4 Channel 2/pin 5 Channel 3/pin 6 RJ12 cable lenght

ø4m (12m2) ø7m (38m2) ø4m (12m2) ø7m (38m2)

0,8m

Diameter indicated at table height.

24 V DC ±10 % 8,5 mA 50 mA (24 V DC) ON/OFF, NPN Power pack 41-981: Terminal ø1 + ø2 Terminal ø6 + ø7 Terminal ø8 + ø9 1m

Performance Lux range (via IR remote) 30-2000 lux Time delay (via IR remote) 2-30 min. and pulse Hysteresis 10 % Detection range 360°, ø7-ø12 m Installation height 2,5-4 m Sensitivity 4 settings Protection class IP 20 Ambient temperature -5° C…+50° C Approval CE according to

EN 60669-2-1

ø3m ø3m

Detector base, 41-905 Ø90 x 43 mm

App. Auto Aut. On/off via PIR Manuel on/off via push button App. Manual Manual on/off via push button Aut. Off via PIR

App. 4 Manual – without light sensor Manual on/off via push button Aut. Off via PIR Option of manual on/off (short press) and constant on (independent of daylight levels) or off with a long press.

Connection

RJ 12:

The detector is connected to power pack 41-981 via RJ12 plug (cable length 1 m). Push-buttons, luminaires etc. are also connected directly to the power pack that can be placed above a suspended ceiling. Additional detectors (41-440) can be connected to the power pack in order to extend the detection area, i.e. in corridors. The detector can be used with factory settings, or the settings can be changed via DIP switch or via the IR remote:

App. Auto – without light sensor Aut. On/off via PIR Manual on/off via push button

ø5m

The presence detector 41-445 is a passive infrared detector that react to temperature changes and movement of persons. The built-in light sensor ”blocks” for switching on light during daytime, when daylight is sufficient. Setting of lux level is made on the detector or via IR remote (optional). The light sensor can be deselected.

Pin 6

Pin 1

Pin 1 .......................+ Pin 2 .......................- 24V DC ±10% Pin 3 .......................Switch / Slave Pin 4 .......................Channel 1 - NPN Pin 5 .......................Channel 2 - NPN Pin 6 .......................Channel 3 - NPN

Order numbers Product

41-445 41-981 RJ 12

Detector 24 V DC Power pack IR remote Detector base

Type

41-445 41-981 41-920 41-905

EAN no.

5703102 204011 5703102 204059 5703102 204028 5703102 205254 R3

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimension (mm)

Power Pack (230 VAC) for use with motion detector 41-445 for indoor lighting control in 2 zones

41-981

165

• Indoor lighting control in 2 zones (on/off) • Built-in power supply for motion detectors • Push-buttons, luminaires etc. are connected directly to the power pack • Possible to connect up to 18 motion detectors, type 41-440

Technical data

Connection

Motion detector

Motion detector 41-445

PIR

24 V DC 1

ø8

ø9

ø10 ø11 ø12 ø13 RJ12

Ch 1

24 V DC

Additional PIR

Push button

Max.: 48 V AC/DC 0,2 A Ch 3

230V

Ch 2

ø1 ø2 ø3 ø4 ø5 ø6 ø7 L2 L2’

L3 L3’

L1 L2 L3 N

Zone 1

230 V AC 50 Hz ±10 % 0.9 W

NO, µ 10 A, potential free Low-voltage relay channel 3 (ø8 +ø9) NO Load max. 48 V/0,2 A Starting peak 80 A/20 ms Compensation capacity 140 µF

Input Supply voltage Power consumption

Output Relay channel 1 and channel 2

NPN

Pushbutton 1

Zone 2

Load Incandescent lamps Fluorescent tubes, not compensated Halogen incandescent lamps Energy-saving bulbs

2300 W 1200 VA 2300 W 58 x (18 W)

Secondary voltage Max. load

24 V DC ±10 % 100 mA

Performance Protection class Insulation Class Ambient temperature

IP 20 Enclosure is class II -5° C…+50° C

Approval CE according to

The power pack, 41-445, serves as power supply to the motion detector, 41-445, which is connected to the power pack via a RJ12 plug. The power pack can be installed above a suspended ceiling and pushbuttons, luminaires, detectors etc. are connected directly to the power pack. Up to 18 motion detectors, type 41-440, can be connected to power pack in order to extend the detection area, i.e. in corridors. The power pack can be used in common access routes, because the device can be connected to multiple phases (groups). Power Pack can control 4 different applications, selected in detector 41-445: • • • •

Auto Manuel Auto – without light sensor Manual – without light sensor

Opportunity for manual override via pushbutton. Upon activation of the push-button > 1 sec. lighting can be turned on or off.

EN 60669-2-1

Principle Zone 1

Zone 2 Push button , 24 V

Potential free low voltage relay (i.e. CTS)

CH 1 230 V AC

41-440 PIR

CH 2

41-440 PIR

CH 3 41-981

Order numbers

41-445 PIR/LUX 41-920

Product

Power pack Motion detector

Type

41-981 41-445

EAN no.

5703102 204059 5703102 204011 R1

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Presence detector PLUS An intelligent detector small movements keep the lighting on

115

43-225

50 76,3

Coverage area to a height of 2.5 meters 9

7,5

4,5

1,5

4,5

7,5

7,5 6 4,5

360°/200 m²

3 1,5

1,5 3 4,5 6

Type 43-225

7,5

Detection sensitivity - ultrasound Small movements

Body movements

Detection sensitivity - infrared Small movements

Body movements

PLEASE NOTE

The detection area is given for an installation mounted at a height of 2.5 meters in an open area without furnishings. Max installation height is 3 meters. If there are partitions in the area the ultrasound detection area may be reduced down to 25 %.

Red +

Grey (movement-controlled + light)

Blue (movement-controlled)

Black -

Black/white

Yellow/white

Blue/white

}

Input Power supply voltage Power consumpt. Output Output Relay contact Relay (movement)

3,5

6,5

Technical data 24 V DC ±10 % 33 mA short-circuit protected NPN, max. 50 mA Potential-free switch max. 24 V DC, 500 mA

Performance Detection angle Detection range up to Time delay Lux range Protection class Installation height Ultrasound frequency Sensor base Cable length to power supply: Cable, double stranded, Ø 0,6 Cable, 0,75 mm² Ambient temperature Humidity

360° 200 m² 8-40 min. 10-1.000 lux IP 40 2,5..3 m. 32 KHZ, standard Ø 129 X 30 mm max. 50 m max. 100 m 0° C...40° C 0-95 %

• Presence detector • Combines the advantages of infrared and ultrasound detection • For 24 V DC • Self-adjusting “Fuzzy logic” • No triggering errors • Registers small movements down to 2 - 3 cm • Blocks in daylight • Output for movement, light and ventilation • Detection areas 180° and 360° The intelligent presence detector PLUS is available in several different models. The differences lie in the area covered and in whether daylight blocking and relay output are required. The presence detectors are self-adjusting, which means that they find the optimal setting for the area automatically. When the two technologies (infrared and ultrasound) are combined, for example a weak infrared signal and a strong ultrasound signal will be sufficient to turn on the lighting. The sensor will thus ensure error-free triggering and register small movements while the lighting is turned on. The presence detector PLUS requires no manual adjustment after it is installed. Adjustment is carried out automatically in the course of a period of four weeks. After this it will be sensitive in periods of activity and less sensitive when there are no people present.

Movement-controlled relay e.g.ventilation/monitoring etc.

43-992

Order numbers Product

Type

Presence detector PLUS 43-225 Detector base 43-992

EAN no.

5703102 005724 5703102 006189 R4

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Presence detector 360° BMS for use in intelligent systems

41-340

127 mm

59 mm

35 mm

• 24 V DC • Potential free output relay for movement • Time delay 1-30 min. • Lux-output 0-10 V • Lux range 30-3000 lux • 360° detection angle • 140 m² detection range • 9 m² detection range for “small movements”

Connection 41-340 lx

PIR

24V DC 1

0-10V 5

Technical data

6 BMS / IBI

+ 24V DC --

Input Supply voltage Power consumption

24 V DC ± 10 % 12,5 mA

Output Relay contact

Ri > 2K

0.5 A, 24 V DC NO potential free 0-10 V (Source) Rj>2 KΩ

Output for light signal

Detection Plan view, diameter indicated at floor level.

A B

Performance Detection angle 360° Detection range - Small movements 9 m² Detction range - Body movements 140 m² Time delay 1-30 min. Lux range 30-3.000 lux Protection class IP 20 Cover colour RAL 9010 (white) Cable max. dimension 2xØ12 mm Mounting height 2.5 - 3.4 m Ambient temperature -5° C…+50° C Sensitivity Option Test mode Option LED indicator on/off (PIR) Option

ø3 m ø5 m

0.05 A 100 m 200 m 300 m 400 m 600 m

Cable length: 0.25 mm² 0.5 mm² 0.75 mm² 1.0 mm² 1.5 mm²

ø12 m ø20 m

A + B = small movements C + D = body movements

With a separate output for light signal 0-10 V and relay for movement signal 1-30 min. you can program the settings of the system yourself. You can connect the output relay (PIR) in parallel. Use only the light signal (LUX) from one detector. Mask To avoid undesired lighting in particular areas, the detector must be constrained with the enclosed mask.

0.5 A 50 m 100 m 150 m 200 m 300 m

0,8m

Area indicated at table height.

The presence detector 360° BMS is especially suitable for use in intelligent installations like EIB, LON and CTS systems.

Planning To ensure optimal detection at the entrance to the room, reduce the range as shown in Fig. 3 when positioning the detectors. Effective detection of a person is achieved at minimum 0.8 m height above floor level.

ø2m 3m² ø3,4m 9m² ø8m 50m² ø13,5m 140m²

Parallel connection 41-340

41-340 lx

PIR

24V DC 1

0-10V 5

PIR

24V DC 6

0-10V 5

6 BMS / IBI

+ 24V DC --

Order numbers Product

Presence detector BMS, 24 V DC

Ri > 2K

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type

EAN no.

41-340

5703102 201201 R6

Product data

Dimension (mm)

Presence detector 360° (24 V AC/DC) with built-in relay

41-549 Ø80

30,6

• 360° detection angle • Built-in time delay up to 60 min. • Small design - only Ø80 mm • Automatic switch-on and off of lighting • 4 sensivity settings

Detection Plan view, diameter indicated at floor height (mounted at height 2,5 m)

Technical data Input Power supply Power consumption

24 V AC/DC ±10 % 40 mA (24 V DC) 83 mA (24 V AC)

Output Contact (Reed relay) ø4m (12m2) ø7m (38m2) ø4m (12m2) ø7m (38m2)

0,8m

Diameter indicated at table height.

max. 48 V / 0,2 A (NO) potential-free

Performance Time delay Detection range Installation height Sensitivity Protection class Ambient temperature

Presence detector 360°, 41-549 is designed for mounting on ceilings for e.g. movement control of HVAC and CTS systems or for use together with Servodan controls. The PIR detector is a universal presence detector for 24 V AC or DC. The integrated timer can be adjusted using the DIP switch to set the time delay for the potential-free contact (reed relay).

5 sec., 30 sec. - 60 min. 360°, dia. ø7-12 m 2.5 - 4 m 4 settings IP 20 -5° C…+50° C

Approval CE according to

EN 60669-2-1

ø3m

ø3m ø5m ø5m

Connection: - one presence detector

Connection - 2 or more parallel-connected presence detectors

41-549 PIR

24V AC/DC 1

24V AC/DC

41-549 PIR

24V AC/DC

HVAC / CTS System

24V AC/DC 3

24V AC/DC

Order numbers Product

Detector 360°

Type

41-549

EAN no.

5703102 204547 R3

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Motion detector for control of HVAC and CTS systems

41-279

109

• 24 V AC/DC • Sensitivity setting • Potential free relay for direct connection to HVAC systems • Built-in walk-test function • 90° detection angle • Detection range up to 15 meter

Connection Motion detector sensor Movement 41-279 41-279 PIR

Technical data Input Supply voltage Power consump.

24V ac/dc 1

Motion detector Movement sensor 41-279 41-279

24 V AC/DC ±10 %) 5 m A (24 V DC) 8 mA (24 V AC)

The motion detector 41-279 is used for ventilation control in halls, exhibiotion areas, offices and conference rooms.

Max. 48V/0,2A (NO Potential free relay

Can be connected directly to HVAC systems for control of ventilation. The detector can also be connected to BMS systems i.e. Comlux.

PIR

24V ac/dc 1

Output Kontakt (reed relæ)

Motion detector Movement sensor 41-279 41-279

PIR

Detector 41-279 is a passive infrared motion detector which responds to temperature changes and movements by people.

Performance Time Detection angle Detection range Protection class With IP54 Cover Cable entry Ambient temperatur CE approval acc. to

24V ac/dc 3

24V ac/dc

(2 sec.) 30 sec.-30 min. 90° 0,5...15 m IP 20 IP 54 2 x Ø 5 mm -20° C...+50° C EN 60669-2-1

The detector is supplied with brackets for ceiling and wall installation. After connection to the power supply, the motion detector is ready for operation after 1-2 min. (power-up time). For outdoor installation the cover 41-902 must be used.

Detection range

41-279

Sensitivity setting Time

Walking direction

Test Test

30m

30s

10m

30s Minmum: Test

30m 10m Maximum: 30 min.

Scale

Order numbers Product

Motion detector IP54 Cover

Type

41-279 41-902

EAN no.

5703102 204318 5703102 203458 R2

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimension (mm)

Presence detector 360° (230 V AC) for flush mounting

41-400 Ø90

• Small design and elegant finish - only Ø90 mm • With or without automatic lux-function • Manual switch-on and off automatic switch off • 360° detection angle • 4 different settings of functions via DIP-switch

60mm for Euro-box

55mm for PL-box

Technical data Input Supply voltage Power consumption

230 V AC ±10 % 50 Hz 0.8 W

Output Switch Starting peak Compensation capacity

Detection Plan view, diameter indicated at floor height (mounted at height 2,5 m)

NO, µ 10 A 80 A / 20 ms 140 µF

Load Incandescent lamps Fluorescent lamps Halogen incandescent lamps

2300 W 1200 VA 2300 W

Performance Lux range Time delay Detection range Installation height Sensitivity Protection class Ambient temperature

30…2000 Lux 5 sec., 2...30 min 360°, dia. ø7-12 m 2.5 - 4 m 4 settings IP 20 -5° C…+50° C

Approval CE according to

ø4m (12m2)

EN 60669-2-1

Detector base, 41-905

ø7m (38m2)

Presence detector 41-400 is a passive infrared detector which react to temperature changes and movements by people. The built-in light sensor blocks off lighting in the daylight hours if there is sufficient daylight. The lux level is set in the detector. The presence detector can be used with its factory settings, or the settings can be modified using the remote control – IR Remote 41-920 (accessory). DIP-switch settings (functions): App. 1) Daylight dependent Aut. On/off via PIR Manual on/off via push button App. 2) Daylight dependent Manual on/off via push button Aut. Off via PIR App. 3) Movement controlled only Aut. On/off via PIR Manual on/off via push button App. 4) Movement controlled only Manual on/off via push button Aut. Off via PIR Accessory IR Remote 41-920

ø4m (12m2) ø7m (38m2)

Ø90 x 43 mm

0,8m

Diameter indicated at table height.

Connection

41-400

ø3m

ø5m

N Planning To ensure optimal detection at the entrance to the room, reduce the distance between door and detector, when positioning the detectors. Effective detection of a person is achieved at minimum 0.8 m height above floor level.

N 230V L

L’

Order numbers Product

Detector 230 V AC IR remote Detector base

Type

41-400 41-920 41-905

EAN no.

5703102 203601 5703102 204028 5703102 205254 R4

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Presence detector 360° (230 V AC) for indoor light and ventilation control

41-300/41-320

127 mm

59 mm

35 mm

Connection diagram 41-300 (standard) PIR

Technical Data

L N

Input Supply voltage 230 V AC ±10 % 50 Hz Power consumption 41-300 1.3 W Power consumption 41-320 1.7 W

41-320 (light and ventilation) PIR

Output Relay contact Starting peak Compensation capacity

L1 L2 N

Detection Skala :

3:1

Dato : 19-09-02 Plan view, Tegnet: diameter KOE indicated at floor level.

A B

4100328

NO, µ10 A, 250 V AC 80A/20 ms 140 µF

Load Incandescent lamps Fluorecent lamps Energisave lamps Low-voltage - Inductive (ring core) Low-voltage - Electronic ballast Tungsten-halogen lamps 230V

2.300 W 1.200 VA 18 W / 58 pcs. 500 VA 1.200 VA 2.300 W

Performance Detection angle 360° Detection range - Small movements 9 m² Detction range - Body movements 140 m² Time delay 1...30 min. Lux range 10-1,000 lux Hysteresis +10 % Protection class IP 20 Cover colour RAL 9010 (White) Cable max. dimension 2 x Ø 12 mm Ceiling installation height Max 2,5 - 3,4 m Ambient temperature -5° C...+50° C

ø3 m ø5 m ø12 m ø20 m

A + B = small movements C + D = body movements

Approval CE according to

Presence detector 360° is available in 2 versions: 41-300 Movement and daylight control (1 channel) 41-320 As for 41-300, with additional potential free output relay for ventilation control (2 channels) If the light has been forgotten when leaving the room, then it will automatically switch off, after the preset time has elapsed. Sensitivity can be adjusted post-installation, if necessary. To avoid undesired lighting in particular areas, the detector lens can be delimited with the enclosed mask. Manual operation of push button switch • Press briefly (0.5-2 sec) to switch off the light upon leaving the room. • Constant light on upon prolonged press > 2 sec. (returns to auto again when pressed briefly) • Constant light off upon prolonged press > 2 sec. (returns to auto again when pressed briefly)

EN 60669-2-1

0,8m

Area indicated at table height.

• Type 41-300 light control (1 channel) • Type 41-320 light and ventilation control (2 channels) • 360° detection angle • Large range - 140 m² • Registers small movements in a range of 9 m² • Extra energysave feature. The light can be switched off manually upon leaving.

Type 41-320 (Light/Vent.) ø2m 3m² ø3,4m 9m² ø8m 50m² ø13,5m 140m²

Extra potential free relay output (ventilation) is daylight independent. Time delay = Timer setting + 25 % Remaining data as for relay (Light)

Parallel connection Mounting of two sensors on the same switch will because of lux-function, affect the control system and is not recommended. Without lux-function - parallel connection is possible.

Order numbers Product

Presence detector Standard Light/vent

Type

EAN no.

41-300 41-320

5703102 201065 5703102 201072 R9

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimension

Presence detector 360° (230 V AC) for indoor light control - Master/slave model

41-302

127 mm

59 mm

35 mm

• Master/slave model – Create a system easily • Automatic switch-on and off of lighting • 360° detection angle • Large range - 140 m² • Registers small movements in a range of 9 m²

Detection Plan view, diameter indicated at floor level.

A B

Technical data

Input Supply voltage Power consumption Output Relay contact Starting peak Compensation capacity

ø3 m ø5 m ø12 m ø20 m

A + B = small movements C + D = body movements

Load Incandescent lamps Fluorescent lamps 0,8m

Area indicated at table height.

ø2m 3m² ø3,4m 9m² ø8m 50m² ø13,5m 140m²

Planning To ensure optimal detection at the entrance to the room, reduce the range when positioning the detectors. Effective detection of a person is achieved at minimum 0.8 m height above floor level.

The integrated light sensor measures the light level in the area continuously. 230 V AC ±10 % 50 Hz 1.3 W NO, µ 10 A 80 A / 20 ms 140 µF 2.300 W 1.200 VA

Performance Detection angle 360° Detection range - Small movements 9 m² Detction range - Body movements 140 m² Lux range 10…1000 Lux Hysteresis +10 % Time delay 1...30 min Sensitivity Selected manually Activation indicator on/off Selected manually Test modes Selected manually Protection class IP 20 Cable max. dimension 2 x ø12 mm Ceiling installation height 2.5 - 3.4 m Ambient temperature -5° C…+50° C Approval CE according to

EN 60669-2-1

Please note! All slave units MUST have the same PHASE as the master unit.

The light is switched on if the light level falls below the preset value and the presence detector detects activity in the coverage area. The detectors can be connected in a master/slave system, so you are able to cover a larger area. On the master unit Lux and Time are set, on the slave unit Time only. The way you install and set the unit, determines if the unit is functioning as master or slave. Calculating the total off delay: Master unit eg. set to 15 min. Slave unit eg. set to 10 min. Total off delay is 25 min. The shortest possible off delay is 2 minutes (master 1 min. + slave 1 min.). If only the master unit is used, the shortest possible off delay is 1 minute. To avoid undesired lighting in particular areas, the lense must be constrained with the enclosed mask. Pushbutton operation Option to use a pushbutton to switch on the light, provided the light level is lower than the preset value.

Conection 41-302 - Master

41-302 - Slave

Push (230 V)

PIR

L N SL

PIR

Order numbers Product

master/slave

Type

41-302

EAN no.

5703102 203922 R2

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Presence detector 360° 2-CH (230 V AC) for indoor light control in classrooms

41-330

127 mm

59 mm

35 mm

• Type 41-330 detector 2-CH – for control of 2 series of ceiling lights + board lighting • Manual switch-on and automatic switch-off of lighting • 360° detection angle • Large range - 140 m² • Registers small movements in a range of 9 m²

Connection diagram

41-330 (2-CH)

Technical Data

PIR

Input Supply voltage Power consumption

L1 L2

Output Relay contact Max. starting peak Compensation capacity

Plan view, diameter indicated at floor level.

NO, µ10 A, 250 V AC 80 A/20 ms 140 µF

Load Incandescent lamps Fluorecent lamps Energisave lamps Low-voltage - Inductive (ring core) Low-voltage - Electronic ballast Tungsten-halogen lamps 230V

Detection

A B

230 V AC ±10 % 50 Hz 1,8 W

ø3 m ø5 m ø12 m ø20 m

A + B = small movements C + D = body movements

Channel 1: is daylight and movement controlled, and is applicable to ceiling lights in the series closest to the windows. Channel 2: is movement controlled only, and it can be applied to ceiling lights remote from the windows, and board lighting. (Potential free relay)

2.300 W 1.200 VA 18 W / 58 pcs. 500 VA 1.200 VA 2.300 W

Operation Lights must always be turned on manually at the push button switch and can be turned off again manually when leaving. If the light has been forgotten upon leaving the room, then it will automatically switch off after the pre-set time has elapsed.

Channel 1 is daylight controlled and will switch on and off dependent upon the level of daylight, provided there is human movement in the premises. Channel 2 will always switch on and off upon manual operation of the switch. Constant light off, such as for showing a film, is achieved by manual operation of the push button switch.

Approval CE according to

EN 60669-2-1

Sensitivity Sensitivity can be adjusted post-installation, if necessary. Mask To avoid undesired lighting in particular areas, the sensor lens can be constrained with the enclosed mask.

0,8m

Area indicated at table height.

Presence detector 2-CH is used in classrooms and is equipped with 2 separate outputs (channels).

Parallel connection

ø2m 3 m² ø3,4m 9 m² ø8m 50 m²m ø13,5 140 m²

Mounting of two detectors on the same switch will because of lux-function affect the control system and is not recommended.

Order numbers Product

Presence detector 2-CH (classroom)

Type

EAN no.

41-330

5703102 201195 R8

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Presence detector 360° – DALI/DSI for indoor lighting control

41-350

127 mm

59 mm

35 mm

Connection diagram 41-350 Sensor 360° DALI/DSI

+ D2

+ L1

D1 D1&2

Technical data Input Power supply Power consumption

L1 N

DALI/DSI Bus 2

DALI/DSI Bus 1

230 V ± 10% 50 Hz 0.3 W

Output DALI Bus 1 Load max. 30 mA or 20 light fittings Ø6 0 V DC and communication Ø5 +15 V DC ±10 % and communication DALI Bus 2 Load max. 30 mA or 20 light fittings Ø6 0 V DC and communication Ø1 +15 V DC ±10 % and communication DALI control Both outputs are DALI broadcast

Detection Plan view, diameter indicated at floor level.

A B

ø3 m

• With DALI and DSI output signals (2 zones) • Optional changeover between manual and automatic operation • Large detection area 140 m²; • Registers small movements within an area of 9 m² • A switch-operated powersaving function for use when leaving the premises • Change of settings via IR remote control • Can be set to provide a constant orientation light when nobody is present. The DALI/DSI presence detector is ideal for controlling premises of up to 140 m², of which 9 m² is within the small movement area. The lighting can be daylight-controlled in 2 zones (20 fittings in each zone).

Performance Detection angle 360° Detection range - Body movements 140 m² Detection range - Small movements 9 m² Time delay 1 - 30 min. Lux range 50 - 1,500 lux Hysteresis +10 % Protection class IP 20 Insulation class Class 1 Colour RAL 9010 (white) Max. cable dimension 2 x Ø 12 mm Ceiling installation height 2.5 - 3.4 m Ambient temperature -5°C – 50°C

If you forget to switch off manually, the light will still be switched off automatically after the preset time.

Approval CE according to

Manual The light can be turned on/off and adjusted either up or down manually via a switch (power current). The light will be turned off automatically via the presence detector when the premises are empty.

Orientation light Has three general settings: 1. Constant light dimmed to x% 2. No orientation light (off) 3. Dimmed light (Time setting 1 – 60 min.) The DALI/DSI presence detector has two function settings:

ø5 m ø12 m ø20 m

A + B = small movements C + D = body movements

0,8m

Area indicated at table height.

ø2m 3m² ø3,4m 9m² ø8m 50m² ø13,5m 140m²

EN 60669-2-1

Automatic The light is turned on/off automatically via the presence detector. The light can always be turned off manually via a switch when leaving the premises. (power-saving switch)

Order numbers Product

Presence detector DALI/DSI IR remote control IR user remor control

Type

EAN no.

41-350 41-922 77-921

5703102 205995 5703102 206015 5703102 205933 R0

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Presence detector 360° 1-10 V for indoor lighting control

41-351

127 mm

59 mm

35 mm

Connection diagram 41-351 Sensor 360° 1-10 V

1-10 V

L1’

Technical data Input Power supply Power consumption

L1 N

Output Output signal

Elect. ballast Light Dimmer

N L

Relay

DC -

230 V ± 10 % 50 Hz 0.2 W 1-10 V/max. 10m A or 20 fittings NO, 10 A

Load Fluorescent tubes, uncompensated 1200 VA Max. compensation capacity 140 uF Max. starting peak 165 A/20 m sec.

Detection

Performance Detection angle 360° Detection range - Body movement 140 m² Detection range - Small movements 9 m² Time delay 1 - 30 min. Lux range 50 - 1,500 lux Hysteresis +10 % Protection class IP 20 Insulation class Class 1 Colour RAL 9010 (white) Max. cable dimension 2 x 12 mm diameter Installation height on ceiling 2.5 - 3.4 m Ambient temperature -5°C – 50°C

Plan view, diameter indicated at floor level.

A B

ø3 m ø5 m

Approval CE according to

ø12 m ø20 m

A + B = small movements C + D = body movements

0,8m

Area indicated at table height.

ø2m 3m² ø3,4m 9m² ø8m 50m² ø13,5m 140m²

EN 60669-2-1

• With 1-10 V output signal (2 zone) • Optional changeover between manual and automatic • Large detection area 140 m² • Registers small movements within an area of 9 m² • A switch-operated powersaving function for use when leaving the premises • Change of settings via IR remote control • Can be set to provide a constant orientation light when nobody is present. The presence detector is suitable for controlling premises of up to 140 m², of which 9 m² is within the small movement area. The lighting can be daylight-controlled in one zone. If you forget to switch off manually, the light will still be switched off automatically after the preset time. To avoid undesired lighting in particular areas, the detector lens can be delimited with the enclosed mask. Orientation light Has three general settings: 1. Constant light dimmed to x% 2. No orientation light (off) 3. Dimmed light (Time setting 1 – 60 min.) The presence detector has two function settings (switches): Manual The light can be turned on/off and adjusted either up or down manually via a switch (power current). The light will be turned off automatically via the presence detector when the premises are empty. Automatic The light is turned on/off automatically via the presence detector. The light can always be turned off manually via a switch when leaving the premises. (power-saving switch) Cut-off Once the light has been adjusted down to its minimum setting (fixed factory-set time), the power supply to the light fittings will be switched off.

Order numbers Product

Type

Presence detector 41-351 IR Remote Control 41-922 IR User Remote Control 71-921

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

EAN no.

5703102 206008 5703102 206015 5703102 205933

Product data

120

Dimensions

Presence detector PLUS Master 360°, 230 V – for indoor lighting control

41-800

109

120

Technical data

Settings

Input Power supply 230 V ± 10% 50 Hz Power consumption (standby) 2W

109

Output Relay

NO, 230 V, µ 10 A

Load Incandescent lamps Fluorecent lamps Tungsten-halogen lamps (230 V) Energisave lamps Max . compensation capacity Max. Starting peak

Detection

2,300 W 1,200 W 2,300 W 58x18 W 140 µF 165 A/20 m sek.

US 8m

PIR ø4m PIR ø8m

US 10m

360°

US 10m US 16m

PIR Body Motion ø8 m = 50 m2 PIR Small Motion ø4 m = 12,5 m2 Ultrasonic Body Motion 16 x 10 m (Oval) = 138 m2 Ultrasonic Small Motion 10 x 8 m (Oval) = 66 m2

Performance Lux range 10 - 1,000 lux Time delay 1 - 30 min. Detection angle 360° Detection range: Ultrasound body movements 10x16 m (138 m²) Ultrasound small movements 8x10 m (66 m²) Infrared body movements Ø 8 m (50 m²) Infrared small movements Ø 4 m (12 m²) Ceiling installation height 2-3m Protection class IP 20 Insulation class Class 1 Colour RAL 9010 (white) Terminal dimension 2 x 2.5 mm² 1 x 2.5 mm² (M/S, R) Ambient temperature 0°C ...+45°C Connected Slave-detector Max. 10 pcs. Approval CE according to

Connection diagram

41-800 Presence detector PLUS

EN 60669-2-1

M/S R

Jumper

M/S R

• Optional changeover between infrared and ultrasound or combined • For ceiling mounting and flush mounting • Large detection area 138 m² with ultrasound • Registers small movements within an area of 66 m² with ultrasound • Duplicate the values of Lux and Time to other detectors by using the IR remote control • Potential free relay for larger loads The presence detector PLUS detects movements by using the infrared and ultrasound technology. The detector is ideal for controlling premises of up to 138 m², of which 66 m² is within the small movement area (ultrasound). The presense detector PLUS can be connected to more Slave-unit type 41-802 for controlling larger premises. Function Adjust the presense detector to detect in different ways depending on use and needs: 1. Triggering of infrared and ultrasound at the same time 2. Triggering of infrared or ultrasound 3. Triggering of just infrared or just ultrasound If the detector detects movement and the lux level is over the preset level, lighting is not switched on. On the other hand if the lux level gets below the preset level, lighting is switched on and stays on as long as movement is detected. The lighting can be switched on/off via push button (power current). The lighting will be switched off automatically when the premises are empty and the off-delay has run out. The lighting can always be switched off manually via a push button. Change of settings via IR remote control type 41-924.

Order numbers Product

230 V - HVAC

Type

Presence detector PLUS Master 41-800 Slave 41-802 IR remote control 41-924

EAN no. 5703102 206077 5703102 206084 5703102 206091 R1

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

120

Dimensions

Presence detector PLUS Slave 360°, 230 V – for indoor lighting control

41-802

109

120

Technical data

Settings

Input Power supply Power consumption

109

Output Terminal

US 8m

US 10m

360°

PIR ø8m

connects to M/S input on 41-800

Performance Detection angle 360° Detection range: Ultrasound body movements 10x16 m (138 m²) Ultrasound small movements 8x10 m (66 m²) Infrared body movements Ø 8 m (50 m²) Infrared small movements Ø 4 m (12 m²) Ceiling installation height 2-3m Protection class IP 20 Insulation class Class 1 Colour RAL 9010 (white) Terminal dimension 2 x 2,5 mm² 1 x 2,5 mm² (S) Ambient temperature 0°C ...+45°C Connected to master type 41-800 Max. 10 pcs.

Detection

PIR ø4m

230 V ± 10% 50 Hz 1.5 W

US 10m US 16m

Approval CE according to

PIR Body Motion ø8 m = 50 m2

EN 60669-2-1

PIR Small Motion ø4 m = 12,5 m2 Ultrasonic Body Motion 16 x 10 m (Oval) = 138 m2

• Connected to presence detector PLUS Master 41-800 • Optional changeover between infrared and ultrasound or combined • For ceiling mounting and flush mounting • Large detection area 138 m² with ultrasound • Registers small movements within an area of 66 m² with ultrasound The presence detector PLUS detects movements by using the infrared and ultrasound technology. The presence detector is ideal for controlling premises of up to 138 m², of which 66 m² is within the small movement area (ultrasound). The presence detector can be mounted directly on the ceiling by using the enclosed surface mounting base or flush mounted with a standard junction box. The presence detector PLUS Slave can be connected to presence detector PLUS Master. Function Adjust the presense detector to detect in different ways depending on use and needs: 1. Triggering of infrared and ultrasound at the same time 2. Triggering of infrared or ultrasound 3. Triggering of just infrared or just ultrasound

Ultrasonic Small Motion 10 x 8 m (Oval) = 66 m2

Connection diagram 41-800 Presence detector PLUS

M/S R

41-802 Presence detector PLUS

Order numbers

Jumper

L N

Max. 10 pcs. Max. 10 pcs. detector PLUS 41-802 Presence

41-802 Presence detector PLUS

Product

Type

Presence detector PLUS Slave 41-802 Master 41-800

EAN no. 5703102 206084 5703102 206077 R1

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

43-997

Technical data

Protection cap type 43-997 Dimensions

Height Width Depth

Colour

171 mm 146 mm 108 mm White

The protection cap is used to protect the sensors in e.g. sports centres, gymnasiums, walking areas. Use it as protection against both ball games and vandalism. Fits: • • • • •

41-262 41-271 41-272 41-274 41-231

Order number: Product

Protection cap

43-998

Technical data

Protection cap type 43-998 Dimensions Colour

Height Width

171 mm 146 mm White

Type

43-997

EAN no.

5703102 201843

The protection cap is used to protect the sensors in e.g. sports centres, gymnasiums, walking areas. Use it as protection against both ball games and vandalism. Fits: • • • • • • • • • •

41-300 41-301 41-320 41-330 41-340 41-350 41-351 41-800 41-802 43-225

Order number: Product

Protection cap

Type

43-998

EAN no.

5703102 201850 R3

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

41-901

40,0

Dimensions

Sensor base • Used with sensor PIR 41-201

80,0

Order numbers Product

Sensor base

41-905

43,0

Dimensions

Type

41-901

EAN no.

5703102 203441

Sensor base

75,7 62,2

• Used with PIR 41-400, 41-440 and 41-445

Order numbers

Product

Sensor base

Dimensions

43-992

Type

41-905

EAN no.

5703102 205254

Sensor base

25,3

• Used with sensor PIR/UL 43-205, 43-215, 43-222 and 43-225

Order numbers

Product

Sensor base

Dimensions

54-905

Type

43-992

EAN no.

5703102 006189

Sensor base

43,5

• Used with sensor PIR 41-270

80,0

Order numbers Product

Sensor base

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type

54-905

EAN no.

5703102 001931

Product data

Function

41-920

1. White buttons 1 2 3 4

Settings: 2. Grey buttons 3. Red buttons 4. Orange buttons 5. Blue buttons

5 Dimensions Range Battey

For daily use For setting of function For setting lux in zone 1 For setting lux in zone 2 41-445 (factor af lux zone 1) For setting off delay of presence detector 100 x 55 x 7 mm 3m CR 2032 3 V, incl.

Function

41-921

1 2

1. Light 1 Manual switch on/off the lighting in zone1 (lux function automatically deactivated) If there has not been detected activity in 2 hours lighting will be switched off 2. Light 2 As 1 but for zone 2 3. Reset Return to normal operation

Dimensions Range Battey

Function

41-922

1. White buttons

Settings: 2. Grey buttons 3. Red buttons 4. Orange buttons 5. Blue buttons

6. Grey buttons

2 1 3

Dimensions Range Battey

Function

41-924

1. White buttons 1 3 5 4

Settings: 2. Grey buttons 3. Red buttons 4. Blue buttons 5. Grey button

2 Dimensions Range Battey

100 x 55 x 7 mm 3m CR 2032 3 V, incl.

For daily use For setting of function For setting lux in zone 1 For setting lux in zone 2 For setting off delay of presence detector For setting of hysteresis and orientation lighting level 100 x 55 x 7 mm 3m CR 2032 3 V, incl.

For daily use For setting of function For setting lux For setting off delay of presence detector Store and duplicate the values of lux and time for other presence detectors 100 x 55 x 7 mm 3m CR 2032 3 V, incl.

IR Remote Control • Used with presence detector 41-400 and 41-445 • Bracket for wall mounting included

Order numbers Product

IR Remote Control

Type

41-920

EAN no.

5703102 204028

IR User Remote Control • Used with presence detector 41-400 and 41-445 • Bracket for wall mounting included

Order numbers Product

Type

IR User Remote Control 41-921

EAN no.

5703102 205926

IR Remote Control • Used with presence detector 41-350 and 41-351 • Bracket for wall mounting included • IR User Remote Control – see 77-921

Order numbers Product

IR Remote Control

Type

41-922

EAN no.

5703102 206015

IR Remote Control • Used with presence detector PLUS 41-800 (PIR/ultrasound) • Bracket for wall mounting included

Order numbers Product

Type

IR User Remote Control 41-924

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

EAN no.

5703102 206091

Product data

Function

77-920

1. White buttons 2 1

Settings: 2. Grey buttons 3. Red buttons

4. Orange buttons

5. Blue buttons

Dimensions Range Battey

IR Remote Control For daily use For setting of function For setting daylight factor and setpoint in zone 1 For setting daylight factor and setpoint in zone 2 For setting off delay of movement sensor

• Used with Luxstat Control 77-050 and IR-receiver 77-910 • Bracket for wall mounting included

100 x 55 x 7 mm 3m CR 2032 3 V, incl.

Order numbers Product

IR Remote Control

77-921

1 2 3

Type

77-920

EAN no.

5703102 204691

Function

IR User Remote Control

1. On

• Used with Luxstat Control 77-050, IR-receiver 77-910, presence detector 41-350 and 41-351 • Bracket for wall mounting included

Manual switch on lighting in both zones Lighting stays on, as long as there is activity 1. Off Manual switch off lighting in both zones Lighting remains off, as long as there is activity 2. Dim up/down Dimming starts by pressing, and by pressing again it´s stops Lighting will remain at the set light level, as long as there is activity 3. Automatic Return to normal operation Dimensions Range Battey

100 x 55 x 7 mm 3m CR 2032 3 V, incl.

Order numbers Product

Type

IR User Remote Control 77-921

EAN no.

5703102 205933 R0

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Electronic starter for fluorescent lamps

16-901

Technical data Power range Connection time General information: Supply voltage Frequency Ballast type Disconnection of defective lamps Switch-on voltage Temperature, Ta Min. start temperature Casing Weight

16-125 W 1.7 sec using 36 W lamp 200-260 V 50/60 Hz Inductive or capacitive max. 5 seconds 1.5 kV Multi pulsing -20°C...+80° C -20° C Polycarbonate 10 gr.

• Power range 16-125 W • Non-flash start of fluorescent lamps • Reduction of maintenance costs (reduced frequency of defective lamp replacements) • Electronic starter disconnects defective lamps, thus preventing irritating flashing and unnecessary power consumption • 20-30 % longer life of lamps • Life of electronic starter > 50,000 hours • Low temperature range -20° C • Approved according to IEC 926 and EN 60926 Servodan’s electronic starter has a great number of advantages compa-red with traditional starter switches. The electronic starter ensures that many switch ON and OFF do not reduce the life of the lamp. Servodan’s electronic starter can be used in a wide temperature range, and the built-in solid-state relay ensures optimum switching on of fluorescent lamps. Controlled heating of the cathode followed by a series of highvoltage start pulses ensure precise switching on of fluorescent lamps - without flashing. The electronic starter switches off any defective lamps. Thus the irritating flashing occurring in traditional starter switches is avoided.

Order numbers Product

Electronic starter

Type

16-901

EAN no.

5703102 002587 R4

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Light sensor 0-10 V for indoor mounting

43-197

52.0

Dimensions

29.5

• For connection to: - Control 36-080 - Luxstat Control 78-0XX • Screw terminals • Protection class IP 20 • 4 lux ranges: - 3...300 lux - 30...3.000 lux - 300...30.000 lux - 600...60.000 lux

Technical data

Selection of lux range

30 - 3000 lx 300 - 30K lx 600 - 60K lx 3 - 300 lx Default setting: 30...3000 lux +

Connection Lux

24 V DC ± 10 %

Output Output voltage

0-10 V

Performance Lux ranges:

3...300 lux, 30...3K lux 300...30K lux, 600...60K lux Protection class IP 20 Connection Screw terminals Max. distance to Control 100 m Cable - Class II control 0,6 mm Ambient temperature -40° C...+50° C

Light sensor 43-197

0-10V

Input Supply voltage

Control 36-080

3 4

Lux Lux range on

Off delay Test

App In

Out

Lux

Set + Light sensor 43-197

Mode Test

0-10V

Fig. 1

D 1 78-0X0 2 Luxstat Control LA

Placement: Fig. 1: When daylight enters the room from the side, the light sensor must be placed so that it “sees” the incoming daylight.

Set -

If the location requires a higher protection class than IP20, use type 43-198 which has a IP54 protection class.

Fig. 3: The light sensor should be placed so that it “looks” directly up at the sky. To avoid direct sunlight, place the light sensor as shoown.

Minilux Control

36-080

The light sensor 43-197 has screw terminal connection, so there is no need for extra junction box.

Fig. 2: The light sensor must be placed behind any curtains or sunblinds fitted behind the window.

Placement

The Sensor 43-197 is a light sensor which covers a number of lux ranges and is intended to control indoor lighting.

3 7

D 8

A 1

10 11 12

Fig. 2

Luxstat Control DIM

78-050

Servodan A/S 20000 Lx N

External control system Lux

RJ12-1 6 polet

RJ12-2 6 polet

0-10V

SENSOR

0-10 V

Order numbers

Ri ³ 2 K ohm

D24 V DC 1

Light sensor 43-197

PLC PPC BMS CTS

Product

D Fig. 3

Light sensor

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type

43-197

EAN no.

5703102 203311 R2

Product data

Dimensions

Presence detector 360° Wireless 230 V AC and 24 V AC/DC for indoor lighting control

41-301

127 mm

59 mm

35 mm

Connection

PIR 230V ac L

Technical data

Input Supply voltage

230 V

Power consumption

PIR 24Vac / DC 1

Output RF system transmitter + --

24 V

Detection Plan view, diameter indicated at floor level.

A B

230 V AC ±10 % 50 Hz 24 V AC / DC ±10 % 1 W (230 V AC) 21 mA (24 V)

ø3 m ø5 m ø12 m ø20 m

A + B = small movements C + D = body movements

0,8m

Area indicated at table height.

EnOcean STM100

Performance Lux range Lux range off

10…1000 Lux LUX is turned towards max to position off, no daylight blocking. Hysteresis > +10 % Time delay 1...30 minutes, with daylight blocking 10 sec.…30 minutes, no daylight blocking Transmitter frequency 868 MHz Transmitter output < 10 mW Transmitter rate of recurrence On standby once per approx. 100 sec. Immediately when PIR activation timer set RF – range 100 meters in open space/free line of vision, approx. 30 meters in buildings Sensitivity Option Activation indicator on/off Option Test modes Option Protection class IP 20 Cable bush 2 x Ø12 mm Ambient temperature -5° C…+50° C Approvals CE accoding to

EN 60669-2-1

Settings

ø2m

LED1 LED2

The model 41-301 detector is a presence detector based on wireless technology that sends an RF telegram to a receiver module, which switches the light on and off. Function The integrated light sensor measures the light level in the area continuously, and compares it with the preset value specified via the LUX setting button. If the light level falls below the preset value and the presence detector detects activity in the coverage area, the light is switched on. The integrated cut-out delay of 1-30 minutes (adjustable) makes sure that the RF switch-on telegrams are sent continuously (approx. once a minute) to the receiver, until the detector does not register activity or the selected ligth level is reached. If you press the LRN button, an RF status telegram will immediately be sent to the receiver. A simple and easy connection. See available receivers on www.enocean.de Penetration rates Materials Wood, plaster and glass without surface foil Brick, MDF and chipboard panels Concrete reinforcement Metal, aluminium panels, etc.

Penetration 90-100 % 65-95 % 10-80 % 0-10 %

LED1 = Light + movement LED2 = Movement LED3 = RF - Transmit

3m² ø3,4m 9m² ø8m 50m² ø13,5m 140m²

• Wireless technology (EnOcean RF transmitter) • Light sensor: 1. Priority: Daylight 2. Priority: Movement • Automatically on/off • 360° detection angle • 140 m² detection range • 9 m² detection range for “small movements”

LRN LED3

LUX

TIME

12 34

Order numbers

Factory settings 15min

Product

Max Min

LUX

Off

1min

TIME

30min

Presence detector Wireless

Type

EAN no.

41-301

5703102 201768 R3

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Presence detector 360° Wireless 230 V AC and 24 V AC/DC for indoor lighting control

41-380

127

Connection

PIR 230V ac L

Technical data

Input Supply voltage

Power consumption

PIR 24Vac / DC 1

Output RF system transmitter + --

Detection Plan view, diameter indicated at floor level.

A B

230 V AC ±10 % 50 Hz 24 V AC / DC ±10 % 1 W (230 V AC) 75 mA (24 V)

ø3 m ø5 m ø12 m ø20 m

A + B = small movements C + D = body movements

0,8m

Area indicated at table height.

EEP 07-07-01

Performance Lux range Lux range off

10…1000 Lux LUX is turned towards max to position off, no daylight blocking. Hysteresis > +10 % Time delay 1...30 minutes, with daylight blocking 10 sec.…30 minutes, no daylight blocking Transmitter frequency 868MHz Transmitter output < 10 mW Transmitter rate of recurrence On standby once per approx. 100 sec. Immediately when PIR activation timer set RF range 100 meters in open field/free line of vision, approx. 30 meters in buildings Sensitivity Option Activation indicator on/off Option Test modes Option Protection class IP 20 Cable bush 2 x Ø12 mm Ambient temperature -5° C…+50° C Approvals CE accoding to

EN 60669-2-1

Settings

ø2m

LED1 LED2

The model 41-380 detector is a presence detector based on wireless technology that sends an RF telegram to a receiver module, which switches the light on and off. Function The integrated light sensor measures the light level in the area continuously, and compares it with the preset value specified via the LUX setting button. If the light level falls below the preset value and the presence detector detects activity in the coverage area, the light is switched on. The integrated cut-out delay of 1-30 minutes (adjustable) makes sure that the RF switch-on telegrams are sent continuously (approx. once a minute) to the receiver, until the detector does not register activity or the selected ligth level is reached. If you press the LRN button, an RF status telegram will immediately be sent to the receiver. A simple and easy connection. See available receivers on www.enocean-alliance.org Penetration rates Materials Wood, plaster and glass without surface foil Brick, MDF and chipboard panels Concrete reinforcement Metal, aluminium panels, etc.

Penetration 90-100 % 65-95 % 10-80 % 0-10 %

LED1 = Light + movement LED2 = Movement LED3 = RF - Transmit

3m² ø3,4m 9m² ø8m 50m² ø13,5m 140m²

LRN LED3

LUX

TIME

12 34

Order numbers

Factory settings 15min

Product

Max Min

LUX

Off

1min

TIME

30min

Presence detector Wireless

Type

EAN no.

41-380

5703102 204998 R2

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Wireless and batteryless presence detector type 41-580 for indoor lighting control

41-580

Dimensions

• Zero-energy detector supplied by a solar cell • Detection range 7 meters/ 360° • For ceiling mounting • Setting of lux and time by the wireless receiver or a Comlux system

120

Technical data

Detection range Plan view, diameter indicated at floor height (mounted at height 2,5 m)

Input Power supply Lux-level for function

Performance Installation height Detection range Protection Temperature range Type of signal/range RF signal EnOcean RF signal range

ø4m (12m2) ø7m (38m2) ø4m (12m2) ø7m (38m ) 2

EnOcean transmitter

0,8m0,8m

Diameter indicated at table height.

Solar cell, zero-energy. more than 80 lx measured by luxmeter. Guidance: 25W bulb, distance approx. 50 cm 2,5 - 4m 360°, ø7 – ø12 m IP20 +5° C ... +50° C indoor use 868 MHz, <10 mW 100 m in free range/ 30 m in buildings EEP 07-07-01

Approvals CE iht. R&TTE 1999/5/EC ETSI EN 301 489-1: 2005-09 ETSI EN 301 489-3: 2002-08 (SRD class2) ETSI EN 300 220-3: 2000-09

ø3m ø3m

ø5m

The presence detector is a product in the Servodan wireless concept. Lighting is turned on manually by the wireless switch and the detector ensures that lighting remains switched on as long as moving people are detected. Via the wireless receiver (e.g. 70-100) the required time delay is set, which ensures that the light remains on for a period after the last person has left. Recommended installation height is 2-4 m. At 2.5 m the detector has a range of 7 m in 360° (38 m²) . A wireless and batteryless switch must be integrated in order to switch on the light manually. The solar-powered presence detector requires at least 80 lux in order to initiate and operate as required. Penetration rates Materials Wood, plaster and glass without surface foil Brick, MDF and chipboard panels Concrete reinforcement Metal, aluminium panels, etc.

Penetration 90-100 % 65-95 % 10-80 % 0-10 %

Principle

– Manual switch on/off by push-button, automatic switch off by detector 70-100

41-580

Order number 230 V

Product

Presence detector Solar/EnOcean Wireless receiver

Type

EAN no.

70-100

5703102 204851

41-580

5703102 203991

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimensions

Wireless EnOcean receiver type 70-100 for indoor lighting control, 230 V AC

70-100 36

112

143

• 230 V AC receiver getting a RF-signal from Sensor PIR 360° Wireless/EnOcean and from EnOcean push-button • Time delay from 0 to 30 min. • Easy mounting and installation

Technical data

Connection

Input Supply voltage Power consumption

ø1

230V~

Output Relay

ø4

ø2 N

N ø5

ø3 L

L ø6

230V~

ø7 ø8 DIP 4 DIP 3 DIP 2 DIP 1

CLR

TIME

LUX LRN

NO, µ 10 A, dry contact

Load: Incandescent lamps Fluorescent tubes, not compensated Halogen incandescent lamps Max. compensation capacity Energy-saving lamps Max. starting Peak Performance Receiver Off delay Lux range

ø1

230V

ø2 N

N L

ø3 L

ø4

230 V AC 50 Hz ±10 % <3W

ø5 N

ø6 L

ø7 ø8 Lin Lout

LED indication Protection Class Ambient temp. Approvals CE according to EnOcean approval

2300 W 1200 VA 2300 W 140 µF 58 pcs. (18W) 80 A/20 m sec.

The wireless receiver is a product in the Servodan wireless concept and can operate together with the wireless push-buttons for manual turning on and off the lighting. It can also operate together with both the wireless push-button and the wireless and battery less PIR sensor (type 41-580). In that case the lighting is turned on by the push-button and the PIR sensor will automatically turn the light off, if no activity is registered in the detection area of the sensor. Of course, the light can always be turned off by the pushbutton. The wireless receiver control, which is supplied with 230 V, can be connected directly to 2300 W max. load. Time delay for the PIR sensor is set optional from 0 to 30 min.

EnOcean RCM 130, standard protocol 868MHz 0 - 30 min Depending on external wireless light sensor For received learned signal IP 20, Enclosure Class II -5° C...+50° C. EN 60669-2-1 See www.servodan.com

Principle

41-580

70-100 41-380

230 V

Order number Product

230 V/24 V With built-in light sensor.

By using the PIR sensor, type 41-380 the light also can be turned on and off automatically.

Wireless receiver Sensor PIR Solar/EnOcean Wireless/battery less push-button Wireless sensor PIR

Type

EAN no.

41-580 72-501

5703102 203991 5703102 205766

41-380

5703102 204998

70-100

5703102 204851

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimension (mm)

Dimmer 74-350 universal RLC light dimmer for resistive, inductive and capacitive loads up to 750 VA

74-350 35

60 44

• Control via push-button or 0-10 V/1-10 V signal • Detect automatically types of loads • Light scenes can be set via push-button • Optional memory settings • Working status shown on dimmer front

Technical data

Connection

Input Supply voltage 230 V ±10 %, 50 Hz Maximum voltage drop over dimmer -5 % Power consumption 1W Input impedance 0-10 V 33 kΩ 1-10 V 22 kΩ Output Minimum load 60 W Maximum Load 60-750 VA resistive, inductive and capacitive (t°<35°C) Max. output voltage Supply voltage x 0.95 (dissipated power = max. 1 % of the absorbed power = max. 7 W) Protections Electric, thermal protection (105°C) with automatic restart

Fig. 1

N L

Fig. 2

N L

Performance Max. cover temperature (tc) 90° C Max. distance to last push button 100 m Wiring of analog control Control and power circuits of the dimmer are galvanically isolated. Humidity Designed for use in an environment with a non-condensing atmospheric humidity (30 % - 70 %) Installation DIN rail (2 modules) Weight 140 g Max. wire diameter per connection terminal: Power supply+load 2 x 2.5 mm2 or 1 x 4 mm2 Input 2 x 2.5 mm2 or 1 x 4 mm2 Approval CE according to

Settings

0-10 V 1-10 V

EN60669-2-1 and EN55015

Dimmer 74-350 is a 60-750 VA universal (RLC) light dimmer for resistive (R), inductive (L) and capacitive (C) loads. When dimming halogen lighting with suitable ferromagnetic transformer, take into account that they must be loaded at least 80 % of their nominal power. Take also into account the efficiency of the transformer when calculating the total dimmer load. On the dimmer front the different operating modes are selected: 1-push button mode The dimmer can be controlled by a pushbutton 1 with the functionality on/off and dim with or without memory. With pushbutton 2 you can save and make light settings (Fig. 1). 2-push button mode If a separate push-button for dimming up and down and switching on and off is required, 2 push-buttons must be connected. Push-button 1 for switching off and dimming down the light Push-button 2 for switching on and dimming up the light (Fig.1). Analogue signal Via a 0-10 V or 1-10 V signal, e.g. from a Luxstat Control, the dimmer can enter into a daylight controlled lighting control system or can be controlled by a 1-10 V potentiometer (Fig 2).

Order numbers Product

Dimmer, 750 VA

Type

74-350

EAN no.

5703102 205223 R1

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimension (mm)

Dimmer 74-351 universal RLC light dimmer for resistive, inductive and capacitive loads up to 1400 VA

74-351

105 44

• Control via push-button or 0-10 V 1-10 V signal • Detect automatically types of loads • Light scenes can be set via pushbutton • Optional memory settings • Staircase timer with dim function

Connection

Technical data

Fig 1

Input Supply voltage 230 V AC ±10 %, 50 Hz Maximum voltage drop over dimmer -5 % Consumption (standby) approx. 2.5 W Input impedance 0-10 V and 1-10 V 120 kΩ

N L

Output Minimum load Maximum load

100 W 1400 VA resistive, inductive and capacitive (t°<35° C) Max. output voltage Supply voltage x 0.95 (dissipated power = max. 1 % of the absorbed power = max. 14 W) Protections Electric, thermal protection (105°C) with automatic restart

Fig 2

N L

Performance Max. cover temperature (tc) 90° C Max. distance to last push-button 100 m Wiring of analog control Control and power circuits of the dimmer are galvanically isolated. Humidity Designed for use in an environment with a non-condensing atmospheric humidity (30 % - 70 %) Installation DIN rail (6 modules) Weight 440 g Maximum wire diameter per terminal: Power supply+load 2 x 2.5 mm2 or 1 x 4 mm2 Input 2 x 2.5 mm2 or 1 x 4 mm2 Approval CE according to

Settings

EN60669-2-1 and EN55015

Dimmer 74-351 is a 100-1400 VA universal (RLC) light dimmer for resistive (R), inductive (L) and capacitive (C) loads. On the dimmer front the different operating mode are selected: 1-push button mode The dimmer can be controlled by a pushbutton 1 with the functionality on/off and dim with or without memory. With push-button 2 you can save and make light settings. Staircase timer function: Via a low voltage push-button 2 the light will be switched on to max. 100 % level. After a time delay (adjustable) the light is dimmed down to 30 % in 15 sec. After 15 sec. in this light intensity the light is switched off (Fig. 1). 2-push button mode If a separate push-button for dimming up and down and switching on and off is required, 2 push-buttons must be connected. Push-button 1 for switching off and dimming down the light. Push-button 2 for switching on and dimming up the light (Fig.1). Analogue signal Via a 0-10 V or 1-10 V signal, e.g. from a Luxstat Control, the dimmer can enter into a daylight controlled lighting control system or can be controlled by a 1-10 V potentiometer (Fig 2). If the dimmer is controlled by a 1-10 V signal, the lighting can be switched on and off independent of the 1-10 V signal by connecting a switch between terminal 2 and 3. (Fig 2).

Order numbers 0-10 V 1-10 V

Product

Dimmer, 1400 VA

Type

74-351

EAN no.

5703102 205216 R1

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Product data

Dimension (mm)

Universal RLC dimmer for resistive, inductive and capacitive loads 350 W

330-00700/330-00701

90,0 45,0 90,0 45,0

49,0 17,5

17,5

49,0 66,0

66,0

Technical data

Connection – 330-00700

Input Supply voltage Power consumption 8-24V AC/DC

Type 330-0700 Control Push buttons

N L 8-24V control

On/Off/ dimm

All-off function

N L function Push button All-off control + All-off function

Connection – 330-00701

230 V AC ±10 %, 50 Hz 0,6 W NO or potential-free (8-24 V) 230 V AC, 5 mA (not galvanically isolated) 8 – 24 V DC (variable voltage)

Type 330-0701 Input impedance 0-10 V 1-10 V

33 kΩ 22 kΩ

Output Min. load Min. load (capacitive) Max. load

5W 20 W 350 W

Load Incandescent lamps Halogen incandescent lamps -230 V Low voltage electronic transformers Low energy lamp CFLi - max. 10 pcs. LED lamps (dimmable) - max. 10 pcs.

5-350 W 5-350 W 20-350 W 5 – 200 W 5 – 200 W

Performance Min. dimming level Adjustable Lamp-specific dimmer curve Adjustable (DIP-switch) Protection Thermal overlaod + short-circuit Mounting DIN rail (1 TU) Ambient temperature -5° C...+ 55° C Temperature of housing (Tc) 90° C Cable dimension maks. 2,5 mm² Power supply and load 2x1,5 mm² or 1x2,5 mm² Input 2x1,5 mm² or 1x2,5 mm² Approval CE according to Settings

EN60669-2-1 3 4 1 2

Fig. 1 Lamp

• Type 330-00700 - control via push-button • Type 330-00701 - control via 0-10 V/1-10 V signal • Dimming of all dimmable light sources • Dimming of low energy lamps and LED lamps 5-200 W • Setting of control mode and load via DIP-switch • Setting of dimming level on the front • For mounting on DIN rail 1 module (17,5 mm) Dimmer 330-00700 and 330-00701 The dimmers are universale (RLC) dimmers, which also are suitable for dimming low energy lamps (CFLi) and LED lamps. For the sake of some types of lamps the dimmers can be set to a minimum light level. Connection of max. 10 lamps on each dimmer when dimming dimmable low energy lamps and LED lamps Dimmer - 330-00700 The dimmer is push-button controlled and is equipped with a all-off input, and is so suitable for use in houses with intelligent systems. The staircase function is sellected via DIP switch. More push buttons can be connected in parallel at any time. The dimmer has as memory function, which stores the last set light level. The dimmer can also be used without memory. Dimmer - 330-00701 The dimmer is controlled via 0-10 V or 1-10 V signal, e.g. from a Luxstat Control. The dimmer can enter into a daylight controlled lighting control system or can be controlled by a potentiometer. Fig. 1 Incandecent lamp Halogen lamp with electronic transformer Halogen lamp with electromagnetic trans. led 1

Retrofit LED lamp - reverse phase control

led 2

Retrofit LED lamp - phase control

CFLi1

Dimmable eco. lamp - reverse phase control

CFLi2

Dimmable eco. lamp - phase control

Mode

Order numbers Product N L 1-10V

Control by potentiometer - 1-10 V 3 4 1 2

Universal dimmer push-button Universal dimmer 0-10 V/1-10 V

Type

EAN no.

330-00700 5413736 293663 330-00701 5413736 293670 R0

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Notes

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Low voltage

Product data

Dimension

Electronic converters for low-voltage halogen lamps

74-210...214

• Soft start • No-load protection • Short-circuit and overload protection • Over-temperature protection • Adjustable with trailing-edge dimmer (R-C) Electronic converters are used for lowvoltage halogen lamps and are adjustable with trailingedge dimmers.

Technical data L

74-210 74-212 74-213

191

175

74-214

220

203

38,5

Connection

Type 74-210 Type 74-212 Type 74-213 N

230V

60 W 105 W 150 W

Type 74-214 230V

12V

Secondary

Primary

200 W

50 Hz 12V tc

L N

Primary

230 V ac 11.5 V eff 25.000 hours

Electronic converters are particularly suitable for being built into furnishings and in combination with low-voltage systems.

Primary wire H03W-F Secondary wire H03W-F

2 x 1.5 mm² 2 x 0.75 mm² as minimum

Electronic converters have a softstart system protecting the lamps; thus lifetime is extended. The converters have overload protection, shortcircuit protection and overtemperature protection. Likewise, they have automatic restarting.

Type 74-210: 60 VA Current Output Ambient temperature, ta Casing temperature, tc

0.27 A at 60 W 20-60 W max. 50° C max. 70° C

Type 74-212: 105 VA Current Output Ambient temperature, ta Casing temperature, tc

0.47 A at 105 W 10-105 W max. 50° C max. 70° C

Type 74-213: 150 VA Current Output Ambient temperature, ta Casing temperature, tc

0.69 A at 150 W 35-150 W max. 45° C max. 80° C

Type 74-214: 200 VA Current Output Ambient temperature, ta Casing temperature, tc

0.8 A at 200 W 50-200 W max. 45° C max. 80° C

NB! Secondary leads to lamps must not exceed 2 m. Primary and secondary leads must not cross one another. Primary and secondary cables must not cross one another. This can cause noise.

50 Hz tc

L N

Supply voltage Secondary voltage Lifetime

Secondary

Connection

Order numbers Product

Converter 20-60 W Converter 10-105 W Converter 35-150 W Converter 50-200 W

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Type

74-210 74-212 74-213 74-214

EAN no.

5703102 003751 5703102 003768 5703102 003805 5703102 006639

Typeoversigt

Type survey

Type

EAN no.

Description

16-901 18-092 18-093 36-080 36-080 36-092 36-094 41-042 41-044 41-047 41-048 41-054 41-055 41-227 41-231 41-231/AN 41-232 41-232/AN 41-233 41-262 41-270 41-271 41-272 41-274 41-279 41-300 41-301 41-302 41-320 41-330 41-340 41-350 41-351 41-380 41-400 41-440 41-445 41-549 41-580 41-800 41-802 41-905 41-920 41-921 41-922 41-924 41-981 43-128 43-196 43-197 43-198 43-225 43-992 43-997 43-998 70-100 74-210 74-212 74-213 74-214

5703102 002587 5703102 203250 5703102 203267 5703102 203298 5703102 203298 5703102 203908 5703102 205261 5703102 201270 5703102 201287 5703102 201294 5703102 203854 5703102 203588 5703102 204202 5703102 006806 5703102 203335 5703102 205964 5703102 203342 5703102 205605 5703102 203359 5703102 203229 5703102 203540 5703102 203557 5703102 203564 5703102 203571 5703102 204318 5703102 201065 5703102 201768 5703102 203922 5703102 201072 5703102 201195 5703102 201201 5703102 205995 5703102 206008 5703102 204998 5703102 203601 5703102 204004 5703102 204011 5703102 204547 5703102 203991 5703102 206077 5703102 206084 5703102 205254 5703102 204028 5703102 205926 5703102 206015 5703102 206091 5703102 204059 5703102 205285 5703102 203373 5703102 203311 5703102 203595 5703102 005724 5703102 006189 5703102 201843 5703102 201850 5703102 204851 5703102 003751 5703102 003768 5703102 003805 5703102 006639

Electronic starter 16-125 W Minilux Control with light sensor Minilux Control with nightblock Minilux Control - outdoor Control - indoor Minilux Control Minilux Control, 2-wired Minilux day/night switch, 12 V Minilux day/night switch, 24 V Minilux day/night switch, 230 V Minilux day/night switch, 230 V Minilux day/night switch, 230 V Minilux day/night switch. 230 V Minilux motion detector Minilux motion detector, white Minilux motion detector, antracit Minilux motion detector, white Minilux motion detector, antracit Minilux motion detector Minilux motion detector Motion detector Motion detector Motion detector Motion detector Motion detector Presence detector, 230 V Presence detector wireless Presence detector, 230 V Presence detector, 230 V Presence detector , 230V Presence detector, 24 V Presence detector, DALI/DSI Presence detector, 1-10V Presence detector wireless Presence detector, 230 V Presence detector, 24 V Presence detector, 24 VDC Presence detector, 24 V Presence detector wireless Presence detector, Master Presence detector, Slave Sensor base for 41-4XX IR Remote Control 41-400/445 IR User Remote Control IR Remote Control 41-350/351 IR Remote Control 41-800 Power Pack til 41-445 Light sensor for 36-094 Minilux light sensor Light sensor Minilux light sensor Presence detector PLUS Sensor base for 43-2XX Protection cap Protection cap Wireless receiver Electronic converter, 60 W Electronic converter, 105 W Electronic converter, 150 W Electronic converter, 200 W

Maj 2012

Page 65 12 14 22 28 16 17 11 10 6 8 7 9 18 19 19 20 20 21 23 42 43 44 45 52 54 67 55 54 56 50 57 58 68 53 46 47 51 69 59 60 62 63 63 63 63 48 17 13 66 15 49 62 61 61 70 76 76 76 76

Type

EAN no.

Description

74-350 74-351 74-592 77-050 77-910 77-920 77-921 78-000 78-050 78-055 78-983 79-050 79-210 79-930 79-985 79-986 79-990 79-995 330-00700 330-00701

5703102 205223 5703102 205216 5703102 201461 5703102 204523 5703102 205049 5703102 204691 5703102 205933 5703102 201348 5703102 201355 5703102 205186 5703102 201379 5703102 204592 5703102 204844 5703102 204639 5703102 205193 5703102 205209 5703102 204684 5703102 205063 5413736 293663 5713736 293670

Dimmer universal, 750 VA Dimmer universal, 1400 VA 4-push button, Opus Luxstat control box External IR-receiver IR Remote Control IR User Remote Control Control, On/Off Luxstat Control, DIN Luxstat Control, DALI Luxstat Power Pack Luxstat control wireless Luxstat wireless cut-off control Luxstat USB stick Power supply for 79-050 Luxstat Repeater Luxstat basic software Luxstat service software Universal RLC dimmer Universal RLC dimmer

Servodan A/S, tel +45 7442 4726, fax + 45 7442 4035, info@servodan.dk, www.servodan.com

Page 71 72 36 37 38 64 64 29 31 33 35 39 40 41 41 41 41 41 73 73

Quality from Servodan Established way back in 1958, we are now Scandinavia’s leading supplier of products and solutions for creating optimal lighting comfort for our customers while significantly reducing energy consumption. We call this intelligent lighting control – for the benefit of people and the environment!

20111019CWH · Tryk: grafisk arbejde

We also supply efficient door annunciator systems as well as a wide range of components to the commercial installation market.

Servodan A/S Stenager 5 DK-6400 Sønderborg, Denmark info@servodan.dk tel. +45 7442 4726 fax +45 7442 4035 www.servodan.com