Product data for intelligent lighting control by Servodan A/S

Product data for intelligent lighting control

Intelligent lighting control

January 2010

The product data in this catalogue gives you thorough information about the products, their features, characteristics, dimensions and type numbers. Additional information about the products – including installation instructions – are available on www.servodan.com.

Table of contents Outdoor lighting control ....................................................................Page 3 Minilux day/night switches

Stand-alone 230 V/12 V/24 V ................................................... 4-8 Control DIN 17,5 mm 230 V .................................................... 9-10 Control DIN 17,5 mm 230 V/display and built-in clock ....... 11-12 Control DIN 35 mm 230 V, with display ..................................... 13

Minilux movement sensors PIR

Stand-alone sensor PIR, 230 V............................................. 14-17

Minilux controls on/off

Control 230 V DIN for 24 V movement sensors ................... 18-19

Minilux controls Dim

Control 230 V DIN for 24 V movement sensors ........................ 20

Indoor lighting control .....................................................................Page 21 Movement Control On/Off

Control On/Off 1 ch., DIN 35 mm, 230 V.................................. 22 Control On/Off 1-3 zones, DIN, 24 V .................................... 23-24

Luxstat control system

Control DIM 1-3 zones, DIN, 24 V ........................................ 25-26 Power pack 3 ch., DIN, 230 V/24 V ........................................... 27 Push buttons for Luxstat ........................................................... 28 Control box DIM, 2 zones, 230 V.......................................... 29-30 Wireless control box DIM, 1-3 zone system ......................... 31-33

Power packs

DIN 230 V/24 V, 2M with relay/4M without relay .................. 34-35

Movement sensors 24 V

Sensor PIR 90° – ceiling/flush mounting ................................... 36 Sensor PIR 90° – wall/corner mounting (24 V-12 V) ............. 37-39 Sensor PIR 360° – ceiling/flush mounting ................................. 40 Sensor DT-A, PIR-A, UL-A, 360° – ceiling mounting ............ 41-43 Sensor PIR 360°/90°, built in relay – ceiling/wall .................. 44-46

Movement sensors 230 V

Sensor PIR 200° – wall mounting .............................................. 47 Sensor PIR 360° – ceiling/flush mounting, IR-remote control ... 48 Sensor PIR 360° – ceiling mounting, 1 or 2 ch..................... 49-51

Parts & accesories

Protection caps for movement sensors ..................................... 52 Electronic starters ...................................................................... 53

Light sensors

Light sensor 24 V /0-10 V .......................................................... 54 Wireless Light sensor EnOcean ................................................. 55

Wireless transmitter EnOcean

Movement sensor PIR 360°, 230 V/24 V – ceiling ................ 56-57 Movement sensor PIR 360°, battery-less – ceiling.................... 58 Push-buttons – Wall, battery-less .............................................. 59

Wireless receiver EnOcean

Receiver box – Wall, 230 V ........................................................ 60

Dimmers

Dimmer for built-in, 230 V ac – 1-10 V ................................. 61-63

Low voltage.......................................................................................Page 65 Electronic converters ......................................................................................................................... 66-68

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Outdoor lighting control

Product data Dimensions

41-047

230 V

Minilux day/night switch 230 V

103

• • • 73

•

• • Skala�:� Dato� :� Tegnet:�

1:1 20-12-04 KOE

Technical data

•

Input Supply voltage Power consumption

230 V AC ±10 % approx. 1 W

41M047_03_R1_031120KOE_Måltegning

Output Relay contact

Lux setting Skala�:� Dato� :� Tegnet:�

1:1 20-12-04 KOE

Test button Pressing the button turns on the lighting for 1 minute. 41M047_03_R1_031120KOE_Måltegning

Light-emitting diode for indication of current light level Preset at factory - 35 lux

Lux setting 2...200 lux

16 A, 230 V AC

Max load: Incandescent lamps 3.000 W Fluorescent lamps (uncompensated) 3.000 VA Tungsten-halogen lamps (230 V AC) 3.000 W Vapour lamps (high/low pressure) 1.000 W Low-pressure sodium/Mercury lamps 1.000 W Actuating current max. 165 A/20 mS Performance Lux range Hysteresis Time delay Protection class Cable Ambient temperature

2...200 lux approx. 50 % approx. 1 min. IP 54 2 x Ø8...13 -50° C...+ 50° C

Light-emitting diode for indication of current light level. Approval CE according to

EN 60669-2-1

Smart design Internal lux-setting 2–200 lux (cannot be deactivated by unauthorised persons) Handles heavy loads 3.000 W / 3.000 VA Test button for correct connection On mounting base Energy saver: turns on only when daylight is insufficient The daylight switch can be connected to a time switch for night-time turn-off

The Minilux day/night switch is specifically designed for controlling outdoor lighting. The lighting turns on automatically when daylight decreases below the preset lux level (adjustable in the range 2 – 200 lux) and turns off when the daylight switch detects daylight above the preset level. The day/night switch has been designed so it has the ideal technical angle for detecting daylight. The light sensor is placed under the slightly upward-tilting front cover so the sensor points skywards. Activating the test button under the front cover will turn on the lighting for 1 minute. The day/night switch is easy to mount and service, as all electronic parts are placed in the front cover. This makes it easy to carry out the wiring after mounting the sensor. The entire base is used as the connection housing.

Connection 41-047

41-047 lx

Order number Combined with time switch

Product

Type EAN no.

Minilux day/night switch 41-047 5703102 201294 R6

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com Skala�:�

3:1

Skala�:�

3:1

Product data Dimensions

Minilux day/night switch 230 V

41-054 74

• Classic design • External lux-setting 5–300 lux • On mounting base • Energy saver: turns on only when daylight is insufficient • The daylight switch can be connected to a time switch for night-time turn-off

Technical data

Connection

Input Supply voltage Power consumption

41-054

Output Relay contact NO, µ10 A, 250 V AC Max load: Incandescent lamps 2.300 W Fluorescent tubes, not compensated 1200 VA Halogen incandescent lamps 500 W Max. compensation capacity 140 µF Max. starting current 80 A / 20 ms

L N

Performance Lux range Protection class Ambient temperature

41-054

Approvals CE according to N

230 V AC ± 10 % 1W

5...300 lux IP 54 -25°...+45° C

The Minilux day/night switch is specifically designed for controlling outdoor lighting. The lighting turns on automatically when daylight decreases below the preset lux level and turns off when the daylight switch detects daylight above the preset level. The LED acts as an adjustment aid, and therefore responds without any time delay. The LED is turned on when the measured lux level is lower than or equal to the scale value setting. The entire base is used as the connection housing, which ensures a quick and easy installation.

EN 60669-2-1

L N

Function

300

Lux

5 0

LED on

LED off

8 10 12 14 16 18 20 22 24

Order number Product

Type

EAN no.

Minilux day/night swi. 41-054 5703102 203588 R1

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Minilux day/night switch 230 V with integrated radio-controlled clock

41-055

128.5

Dimensions

80.0

Technical data

Connection

Input Supply voltage Power consumption

41-055

Output Relay contact NO, µ10 A Dry relay contact Max load: Incandescent lamps 2.300 W Fluorescent tubes, not compensated 1200 VA Halogen incandescent lamps 2300 W Energy saving light bulbs 58 pcs. (18 W) Max. compensation capacity 140 µF Max. starting current 80 A / 20 ms

L N

41-055

230 V AC ± 10 % <1 W

Performance Lux range Protection class Temperature range

L2 L1 N

Approvals CE according to

Dry relay contact

5-500 lux IP 54 -25°...+50° C EN 60669-2-1

• With integrated radiocontrolled clock (DCF) and seven activation programmes • The clock function can be used without the DCF signal • Classic design • External lux-setting 5–500 lux • Energy saver: turns on only when daylight is insufficient • Easy to install and to programme The Minilux day/night switch is specifically designed for controlling outdoor lighting. The lighting turns on automatically when daylight decreases below the preset lux level and turns off when the daylight switch detects daylight above the preset level. During the lighting periode the switch can be programmed to turn off light when needed - for instance in the middle of the night or during weekends. The entire base is used as the connection housing, which ensures a quick and easy installation. The callsign DCF77 stands for D = Deutschland (Germany) C = Long wave signal F = Frankfurt 77 = frequency: 77.5 kHz

Function

Lux

Evening

Morning

Lux setting 35 lx

18:00 Daylight controlled Activation, Prog. 1 and 2 Time on 18:00 and 05:00 Time off 23:00 and 09:00 Light

On Off

20:00

23:00

05:00

07:00

09:00

Time

Order number Product

Type

EAN no.

Minilux day/night swi. 41-055 5703102 204202 R0

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

41-044

24 V

Minilux day/night switch 24 V AC/DC

103

• • • 73

• •

• Skala�:� Dato� :� Tegnet:�

1:1 20-12-04 KOE

Technical data Input Supply voltage Power consumption

24 V AC/DC approx. 1 W

41M047_03_R1_031120KOE_Måltegning

Lux setting Skala�:� Dato� :� Tegnet:�

1:1 20-12-04 KOE

Test button Pressing the button turns on the lighting for 1 minute. 41M047_03_R1_031120KOE_Måltegning

Light-emitting diode for indication of current light level

Output Relay contact

NO, µ4A, Cos ϕ =1

Max load: Incandescent lamps Minimum load

80 W > 150 mA/24 V DC

Performance Lux range Hysteresis Time delay Protection class Cable inputs Ambient temperature

2...200 lux approx. 50 % approx. 1 min. IP 54 2 x M 20 -50° C...+ 50° C

Light-emitting diode for indication of current light level Approval CE according to

Preset at factory - 35 lux

EN 60669-2-1

Lux setting 2...200 lux

Smart design Internal lux-setting 2–200 lux (cannot be deactivated by unauthorised persons) Test button for correct connection On mounting base Energy saver: turns on only when daylight is insufficient The daylight switch can be connected to a time switch for night-time turn-off

Connection

41-044

41-044 lx

24 V AC/DC

24 V AC/DC Combined with time switch

Order number Product

Type EAN no.

Minilux day/night switch 41-044 5703102 201287 R3

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

41-042

12 V

Minilux day/night switch 12 V AC/DC

103

• • • 73

• •

• Skala�:� Dato� :� Tegnet:�

1:1 20-12-04 KOE

Technical data Input Supply voltage Power consumption

12 V AC/DC approx. 1 W

41M047_03_R1_031120KOE_Måltegning

Lux setting Skala�:� Dato� :� Tegnet:�

1:1 20-12-04 KOE

Test button Pressing the button turns on the lighting for 1 minute. 41M047_03_R1_031120KOE_Måltegning

Light-emitting diode for indication of current light level

Output Relay contact

NO, µ4A, Cos ϕ =1

Max load: Incandescent lamps Minimum load

40 W > 300 mA/12 V DC

Performance Lux range Hysteresis Time delay Protection class Cable inputs Ambient temperature

2 – 200 lux approx. 50 % approx. 1 min. IP 54 2 x M 20 -50° C...+ 50° C

Light-emitting diode for indication of current light level Approval CE according to

Preset at factory - 35 lux

EN 60669-2-1

Lux setting 2...200 lux

Connection

41-042

41-042 lx

12 V AC/DC

12 V AC/DC Combined with time switch

Order number Product

Type EAN no.

Minilux day/night switch 41-042 5703102 201270 R3

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Minilux control (day/night switch) with separate light sensor

18-092 53

17,5

Technical data

Connection

Lux 0-10V

A B

Light sensor 43-196

18-092 150 35 3

Lux

B1 B2 B3

300

L N

Minilux Control 18-092

• 17,5 mm module • Lux range 3-300 lux • For installation in distribution board or simple casing • Class I product – The sensor lead must be installed as a high voltage installation • LED indicating current light level

Input Supply voltage 230 V AC ± 10 % Power consumption <1 W Signal from light sensor 0-10 V

The light is switched on at the pre-set lux level (default 35 lux). The light is switched off again when the daylight exceeds the Lux on setting by 10 %.

Output Relay contact NO, µ10 A, 250 V AC Max load: Incandescent lamps 2.300 W Fluorescent tubes, not comp. 1.200 VA Halogen incandescent lamps 500 W Max. compensation capacity 140 µF Max. starting peak 80 A / 20 ms Output voltage 56 V DC

Minilux 18-092 control switches on the light immediately after a power failure for one minute, and on startup.

Performance Lux range 3...300 lux Adjustment range for Lux on 3...270 lux Tolerance of lux range ±10 % Time delay 1 min. Protection class IP 20 Insulation class Class I Cable to 43-196 3 x 1,5 mm² Max cable lenght to 43-196 100 m Temperature range +5° C...+50° C

The product is class I, so the sensor lead must be installed as a high voltage installation, max. length 100 m, 3 x 1.5 mm².

The LED acts as an adjustment aid, and therefore responds without any time delay. The LED goes off when the measured lux level is lower than or equal to the pre-set lux level.

Approval CE according to EN 60669-2-1

Function

Evening

Morning

Lux

Off Lux on +10 % (38,5 lux) Lux on 35 lux

Order numbers: Time on off

Produkt

Minilux Control Minilux light sensor

Type

EAN nr.

18-092 5703102 203250 43-196 5703102 203373

Complete with light sensor (18-092 + 43-196) 18-192 5703102 203472

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Minilux light sensor 0-10 V for outdoor mounting

43-196

52.0

• For connection to Minilux Control 18-092

• 56 V DC • Screw terminal connection • Protection class IP 54 34.5

Minilux light sensor 43-196 is for outdoor lighting control.

Technical data

Connection to Minilux 18-092

Lux

Light sensor 43-196

0-10V

Minilux Control 18-092

18-092

Input Supply voltage

56 V DC ± 10 %

Output Output voltage

0-10 V

Performance Lux range Protection class Connection Distance from Control Cable Ambient temperature

The light sensor has screw terminal connection, so there is no need for extra junction boxes.

3...300 lux IP 54 Screws & terminal Max. 100 m 3 x 1,5 mm² -40° C...+50° C

150

The light sensor has a IP 54 protection class. Please note! The light sensor must be connected to a class I Minilux Control, and therefor wiring to sensor must be set up as for power current. Placement: By placement on a wall you must make allowance for the shadow effects on the sensor. (see fig. 1)

35 3

Lux

300

The sensor must be placed notherly, because north is lightneutral in proportion to the suns daily cycle eastsouth-west.

Connection to external control system

Lux D1

0-10V

Light sensor 43-196

L 1

0-10 V

Ri  2 K ohm

56 V DC

PLC PPC BMS CTS

Placement

SENSOR

 Fig. 1



Order numbers Product

Minilux light sensor Minilux Control

Type

EAN no.

43-196 5703102 203373 18-092 5703102 203250

Complete with Day/night switch (18-092 + 43-196) 18-192 5703102 203472 R2

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Minilux Control (day/night switch) with seperate setting of morning and evening level. Integrated clock function for night blocking.

18-093 53

• • • •

17,5

Connection

Light sensor 43-198

0-10V

A B

Input Supply voltage 230 V AC ± 10 % Power consumption <1 W Signal from light sensor 43-198 0-10 V

18-093

Lux on off

Test

±1h

on off Time

Minilux Control 18-093

Mode Set

C D

•

Technical data

Lux

Performance Lux range Lux on Lux off

L N

Push button switch for deactivating the time blocking period.

Lux on off

Test

±1h

on off Time

Display

Output Relay contact NO, µ10 A, 250 V AC Max load: Incandescent lamps 2.300 W Fluorescent tubes, not comp. 1.200 VA Halogen incandescent lamps 500 W Compensation capacity 140 µF Max. starting peak 80 A / 20 ms Supply voltage 43-198 24 V DC 3...300 lux 10...300 lux 10 %...70 % of Lux on (Min. 3 lux, max. 90 lux) Tolerance of lux range ±10 % Time delay 1 min. Protection class IP 20 Backup for clock > 2 hours (when the unit has been connected at least 5 minutes.) Clock stability at 20°C, per day ±1s Insulation class Class I Temperature range +5° C...+50° C Approval CE according to

EN 60669-2-1

Lux Evening

17,5 mm module Lux on 3-300 lux Easy setting via display For installation in distribution board or simple casing Class I product - The sensor lead must be installed as a high voltage installation

Minilux Control 18-093 is easy to programme via display. In the display you can set Lux on, Lux off, time and night blocking. The light is switched on at the pre-set lux level (defaul 35 lux). In the morning, the light is switched off again at the lower Lux off setting. Lux off can be set to 10-70 % of Lux on (but min. 3 lux and max. 90 lux). Minilux Control 18-093 has an integrated clock function allowing the light to be switched off completely during a pre-defined period. Switching off the lighting for example during the night means more energy saving. The time blocking period can be deactivated by mounting a switch between terminals øC1 and øC2. After a power failure and on startup the light will be switched on for one minute. The product is class I, so the sensor lead must be installed as a high voltage installation, max. length 100 m, 3 x 1.5 mm².

Morning

Lux on 35 lx Lux off 20 lx

Order numbers 18:00

Lighting Control Night blocking Light

on off

23:00

06:00 08:00

Time

Product

Minilux Control Minilux sensor

Type

EAN no.

18-093 5703102 203267 43-198 5703102 203595

Complete with light sensor (18-093 + 43-198) 18-193 5703102 203489

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Minilux light sensor for outdoor mounting

43-198

52.0

• 43-198 for connection to

34.5

Minilux Control 18-093, Minilux Control 36-092 and Control 36-080 • 24 V DC • Screw terminal connection • Protection class IP 54 Minilux light sensor 43-198 is for outdoor lighting control.

Technical data

Connection

Lux

Light sensor 43-198

0-10V

Input Supply voltage

24 V DC ± 10 %

Output Output voltage

0-10 V

Performance Lux ranges: A1

3...300 lux, 30...3K lux 300...30K lux, 600...60K lux Protection class IP 54 Connection Screw terminals Distance from Control Max. 100 m Cable: Class I Control 3 x 1,5 mm² Cable: Class II Control 0,6 mm Ambient temperature -40° C...+50° C

Minilux Control 18-093

18-093

Lux on off

Test

±1h

on off Time

Connection to external control system

Mode Set

Lux

Light sensor 43-198

0-10V

1 C1

0-10V

36-080

Please note! If the light sensor is connected to a class I Minilux Control (18-093), the wiring to the sensor must be set up as for power current. Placement: By placement on a wall you must make compensation for the shadow effects on the sensor. (see fig. 1)

0-10 V

PLC PPC BMS CTS

The light sensor has a IP54 protection class.

The sensor must be placed notherly, because north is lightneutral in proportion to the suns daily cycle eastsouth-west.

Ri  2 K ohm

24 V DC

Lux

The light sensor has screw terminal connection, so there is no need for extra junction boxes.

3 4

Control 36-080

30 - 3000 lx 300 - 30K lx 600 - 60K lx 3 - 300 lx

Minilux Control

Lux Lux range on

Off delay Test

App In

Out

Mode

Set +

Test

Set -

Placement 1 C

L N

SENSOR





Order numbers Product Fig. 1

Minilux light sensor

Type

EAN no.

43-198 5703102 203595 R2

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Minilux Control (day/night switch) with separate light sensor

36-092 54

• • •

• 35

• Technical data

Connection

Input Supply voltage Load

Lux

Light sensor 43-198

0-10V

Minilux Control

36-092 Lux Lux range on

Test

Mode

Set +

Test

Set -

L N

Minilux Control 36-092

230 V ± 10 % 50 Hz max. 40 mA (no short circuit protection) Power consumption ca. 2 W Signal from light sensor 0-10 V

35 mm modul 3 lux ranges For installation in distribution board or simple casing Class II product – cable to light sensor can be installed as low-voltage Easy settings via display

The Minilux 36-092 Control is designed for fitting in boards on DIN rails. External Light Sensor 43-198, which measures the current daylight level, is connected to 36-092

Output Relay contact NO, µ10 A, 250 V AC Max load: Incandescent lamps 2.300 W Fluorescent tubes, not compensated 1.200 VA Halogen incandescent lamps 500 W Compensation capacity 140 µF Max. starting peak 80 A / 20 ms Secondary voltage 24 V DC ±10 % Ripple max. 0,5 Vpp

The light is switched on at the preset Lux on value (default 35 lux). In the morning the light is switched off once more when a value of Lux on + 10 % is reached.

Performance Lux range

The current light level can be read off from the display.

3...300 lux 30...3.000 lux / 300-30.000 lux Setting range 3...270 lux 30-2.700 lux / 300-27.000 lux Tolerance of lux range ±10 % Positive hysteresis 10 % Protection class IP 20 Insulation class Class II Ambient temperature +5° C ... +50° C Approvals CE according to

The night switch is easy to programme via the display. Lux on can be set in the module. There is also a facility to test the installation.

In the event of a power failure and at startup, the light is switched on for 1 minute. The product is designed as class II – the cable to the light sensor can be installed as low-voltage.

EN 60669-2-1

Function Lux Evening

Morning

Light Off Lux on +10% (38,5 lux) Light On Lux on 35 lux

Order numbers Product

Minilux Control Minilux light sensor on off

Time

Type

EAN no.

36-092 5703102 203908 43-198 5703102 203595

Complete with light sensor (36-092 + 43-198) 36-192 5703102 203915

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Minilux movement sensor (230 V) type 41-227 for outdoor lighting control

41-227

Dimensions

• • • • •

122

Technical data Input Supply voltage Power consumption

Connection PIR

Brown Blue

Output Relay contact NO, µ 10 A, 250 V, cos ϕ = 1 Max load: Incandescent lamps 2.300 W Fluorescent tubes, not compensated 1.200 VA Compensation capacity 140 µF Tungsten-halogen lamps (230 V) 2.300 W Max. starting peak 80 A/20 ms

Red

L1 N

Performance Detection angle Detection range Time delay Lux range Protection class Sensitivity Mounting hight Ambient temperature

PIR

230 V AC ±10 % <1W

200° 3-14 m. 6 sec...12 min. from 3 Lux IP 44 Adjustable 2-3 m -20° C...+40° C

Approvals CE according to

Connection for 230 V Detection angle 200° Range 14 m Time delay up to 12 min. External setting of lux level, time and sensitivity

The Minilux PIR Sensor 41-227 responds to movement and temperature differences. The sensor, with its detection angle of 200°, is suitable for controlling lighting in surrounding outdoor areas. A built-in light sensor prevents the lightning to switch on by day. The lighting can by switched on with an indoor switch (Switches off when the adjusted time expires). The head of the sensor can be moved slightly up and down.

EN 60669-2-1

200° Detection

Settings

200°

14m

7 14m

3 0 3

14m

3 0 3

METER

LUX

+ TIME

2m 2m

Order number

3 3 77

14mm 14

Product

Servolux PIR

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Type

EAN no.

41-227 5703102 006806 R3

Product data Dimensions

Minilux movement sensor (230 V) type 41-231 for outdoor lighting control

41-231 72

125

• • • • • • Technical data

Connection

41-231

Blue Brown Red

Blue

41-231

Blue Brown Red N

230 V ± 10 % 50 Hz <1W

Output Relay contact NO, µ10 A Max load: Incandescent lamps 2.300 W Fluorescent tubes, not compensated 1.200 VA Halogen incandescent lamps 2.300 W Compensation capacity 140 µF Max. starting peak 80 A/20 ms Performance Detection angle 180º Detection range 0–14 meter Time delay 8 sec...30 min Lux range 5...∞ lux Protection class IP 54 Insulation class Class II Ambient temperature -20° C...+45° C Cable entry 2 x ø12.5 mm bushes fitted

Blue Brown Red

Input Supply voltage Power Brown Red consumption

Approvals CE according to

EN 60669-2-1

230 V connection Detection angle 180° Detection range 14 meters Time delay up to 30 mins. Setting of lux, time and meters below cover Facility to block detection range

The sensor has an integrated light sensor, which guarantees that the lighting is only switched on when detecting people in motion and the daylight level (lux level) is below the preset level. The lighting remains switched on as long as moving people are detected. The sensor’s integrated timer is used to set the required time delay, which ensures that the light remains on for a period after the last person has left. Recommended installation height: 2-3 m. At 2.5 m the sensor has a range of 14 m over 180°. A switch can be integrated if manual activation is required. The button must be activated for >4 seconds in order for the sensor to be switched on. The sensor will switch on independently of lux, and the light will remain on in the set time. The sensors can be fitted directly to a wall.

Detection range

The enclosed cover can be used if you wish to screen off an area from detection.

Settings 180°

2,5 m 0

14 m

LUX

TIME 12m

2,5 m Less sensitive

Range in meter 14 m 8m 6m

14 m 8s

14 m

More sensitive

Order number 0

Product 14 m

Minilux sensor

More ensitive

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Type

EAN no.

41-231 5703102 203335

Product data Dimensions

Minilux movement sensor (230 V) type 41-232 for outdoor lighting control

41-232

130

• • • • • • •

Technical data Input Supply voltage Power consumption

Output Relay contact NO, µ 10 A, 250 V, cos ϕ = 1 Max load: Incandescent lamps 2.300 W 41-232 Fluorescent tubes, not compensated 1.200 VA Compensation capacity 140 µF Tungsten-halogen lamps (230 V) 2300 W Brown BlueMax. Red starting peak 80 A / 20 ms

Connection 41-232

Brown Blue L

41-232

own Blue L

Red

1-232

Brown Blue

Red

230 V ± 10% 50Hz <1W

Red

Performance Detection angle 180º Detection range 0–14 meter Time delay 8 sec...30 min Lux range 5...∞ lux Protection class IP 54 Insulation class Class II Ambient temperature -20°C...+45°C Cable entry 2 x ø12.5 bushes fitted Approvals CE according to

EN 60669-2-1

L N

230 V connection Detection angle 180° Detection range 14 meters Time delay up to 30 mins. Setting of lux, time and meters below hidden cover Facility for ceiling installation Facility to block detection range

The sensor has an integrated light sensor, which guarantees that the lighting is only switched on when detecting people in motion and the daylight level (lux level) is below the preset level. The lighting remains switched on as long as moving people are detected. The sensor’s integrated timer is used to set the required time delay, which ensures that the light remains on for a period after the last person has left. Recommended installation height: 2-3 m. At 2.5 m the sensor has a range of 14 m over 180°. A switch can be integrated if manual activation is required. The button must be activated for >4 seconds in order for the sensor to be switched on. The sensor will switch on independently of lux. The sensors can be fitted directly to a wall. For ceiling installation, fitting 41904 (accessory) must be used.

Detection range

The sensor head can be rotated 25° (horizontally) to the right or the left.

180°

The enclosed cover can be used if you wish to screen off an area from detection.

Settings 12m

14 m

LUX

TIME

METER

2,5 m 12m

LUX

TIME

+ METER

14 m

Order numbers Product

Minilux PIR Ceiling bracket

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Type

EAN no.

41-232 5703102 203342 41-904 5703102 203885

Product data Dimensions

Minilux movement sensor with dim (230 V) type 41-233 for outdoor lighting control

41-233

130

• • 90

•

Technical data

Connection

Input Supply voltage Power consumption

41-233 Elect.

OK Brown Blue

Red

N 180°

14 m

Performance Detection angle 180º Detection range 0–14 meter Time delay 10 sek...30 min Lux range 5...∞ lux Dim 20%...60% Time clock 24 hours Clock backup approx. 4 hours Protection class IP 54 Insulation class Class II Ambient temperature -20° C...+45° C Cable entry 2 x ø12.5 bushes fitted

14 m

Detection and settings

2,5 m

15M

30M

DIM

14 m

BLOCKING TIME ON

BLOCKING TIME OFF

230 V ± 10 % 50 Hz <1W

Output Max load: R, Incandescent lamps 40...400 W L, Inductive (Iron core transform.) 50...200 VA 230 V Halogen 40...300 W

TIME ADJ.

• • • •

Approvals CE according to

16H

LUX

EN 60669-2-1

CLOCK

TIME

METER

12m

60%

Note! Parallel connection NOT allowed!

20%

Lux Evening

Morning

Luxniveau 70 lux

18:00

23:00

06:00

08:00

• •

230 V connection Dim function for increased comfort Integrated clock function for night blocking Detection range 180° Detection range 14 meters Time delay up to 30 mins. Setting of Dim, lux, time and meters below hidden cover Facility for ceiling installation Facility to block detection range

The sensor’s integrated light sensor measures the daylight level continuously. If the daylight level falls below the preset level (LUX), the sensor switches on the light. The light is switched on at the present dimmer level (DIM), and at the same time the sensor becomes sensitive to movement. If the sensor registers movement, the light level increases to max. When the sensor no longer registers movement, the light remains at the max. light level for the preset time (TIME). The light is then dimmed once more. When the integrated light sensor registers that the daylight level is higher than the preset level (LUX), the sensor switches off the light. If the light is switched on to max. via PIR, the light is only switched off when the preset time (TIME) has expired. The sensor has an integrated clock function that allows the light to be switched off (blocked) for a predefined period, e.g. at night. During this period the sensor will still switch on the light at max. light level if it registers movement.

Time

Lighting Control Blocking

On Off

Movement

Light

On Dim Off

Order numbers Product

Minilux PIR Dim Ceiling fitting

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Type

EAN no.

41-233 5703102 203359 41-904 5703102 203885

Product data Dimensions

Minilux control for switching on and off the light automatically. Programming via LCD display

36-080

• 1st priority: movement sensor 35

• • • • •

Connection - outdoor lighting control

Technical data 41-262

Push button for switching on

Lux

PIR

0-10V

NPN

Energy-saving off (optional)

PIR 1

Lux Lux range on

Off delay Test

Out

App In

Set +

Test

Set -

Mode

Minilux Control

36-080

Performance Lux range

3...270 Lux (3...300) 30...2.700 Lux (30...3.000) 300...27.000 Lux (300...30.000) Tolerance of lux range ±10 % Positive hysteresis 10 % Time delay 0-60 min Protection class IP 20 Insulation class Class II Ambient temperature +5° C ... +50° C

230 V ± 10 % 50 Hz max. 40 mA (not short circuit-proof) Power consumption approx. 2 W Signal from light sensor 0-10 V Output Relay contact NO, µ10 A, 250 V AC Max load: Incandescent lamps 2.300 W Fluorescent tubes, not comp. 1.200 VA Halogen incandescent lamps 500 W Max. compensation capacity 140 µF Max. starting peak 80 A / 20 ms Output voltage 24 V DC ± 10 % Ripple max. 0,5 Vpp

NPN

Indgang Supply voltage Load

L N

Approval CE according to

Display

36-080

Function The lighting will only be switched on when the movement sensor is activated, and only if the light sensor measures insufficient daylight. The lighting will be switced off after the cut off delay of the control has elapsed. Products for this function: 36-080 + 41-262 + 41-902 Minilux 36-080 Control switches on the light immediately after a power failure for one minute, and on startup. Possibility of manual switch off (Save switch) via push button. In test mode the lighting is switched on for 5 seconds everytime there is activity from the movement sensor. The product is also for indoor lighting control. Sensor PIR with or without built-in light sensor is available.

EN 60669-2-1

Minilux Control

Lux Lux range on

Off delay Test

App In

Out

Mode

2nd priority: daylight 230 V AC LCD display 3 lux ranges Test function Possibility of manual functions

Order numbers

Set +

Product

Minilux Control

Type

EAN no.

36-080 5703102 203298 Outdoor R3

Test

Set - A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com Servodan

Product data Dimensions

Minilux PIR movement sensor for outdoor lighting control - with built-in light sensor

41-262/272 34

109

41-262

41-902

Technical data

Detection range

Input Supply voltage 24 V DC ±10 % Max. current load 50 mA (24 V DC) Power consump. - worst case <5 mA (24 V DC) Power consump. - standby <3 mA (24 V DC)

V°

41-262 / 41-272

Output Output signal Output voltage Lux

Meter

M 15 7,5 4

3 1,5

V 0° 5° 10° 20° 45°

10 m

15 m

10 m

On/Off, NPN 0-10 V

Performance Detection angle 90° Detection range 0,5...15 m Lux range (41-262 only) 3...300 lux Protection class IP20 Protection class with cover 41-902 IP54 Cable entry 2 x Ø 5 mm Cable lenght Max 200 m 2 x 2 x 0,6 mm Ambient temperatur -20° C...+50° C Lux

15 m

NPN

Connection

Lux

41-262

PIR

NPN

0-10V

Minilux PIR 41-262 is a passive infrared sensor which react to temperature changes and movements by people (and cars). The Minilux sensor 41-262 is used in combination with Minilux Control 36-080 for outdoor lighting control. After connection to the power supply, PIR sensors are ready for operation after 1-2 min. (power-up time). The built-in light sensor blocks off lighting in the daylight hours if there is sufficient daylight. The lux level is set on the Minilux Control. The sensors are supplied with brackets for ceiling and wall installation. If you with to connect more than one movement sensor, please use type 41-272 which is the same sensor just without the built-in light sensor. 41-262 Master 41-272 Slave

PIR

0-10V

• 24 V DC • Sensitivity setting • Up to eight sensors on one control • Built-in walk-test function • 90° detection range • Detection lenght up to 15 meter

15 m 1

Lux Lux range on

2,5 m

For outdoor installation the cover 41-902 must be used.

Minilux Control

36-080

Off delay Test

App In

Out

36-080 Minilux Control Mode Lux Lux Off Set + range on

delay Test

Test App In

Set +

1 Test2

3Set -

36-080

Set Out

Mode

C D 3

D 3

Sensitivity setting

Normal

Parallel connection Lux

Max. 1

2 1

3 2

PIR

0-10V

4 3

PIR 1

2 1

Order numbers

NPN NPN

PIR NPN

Min.

41-272

Lux 0-10V

NPN

41-262

Product

Max 8 Use only one sensor with built-in light sensor

Minilux sensor Minilux sensor IP54 Cover

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Type

EAN no.

41-262 5703102 203229 41-272 5703102 203564 41-902 5703102 203458 R2

Product data Dimension

Minilux Control with Dim type 74-360 for lighting control

74-360 54

• • •

•

• With light sensor built-in, in movement sensor

41-262

button

Lux

PIR

NPN

0-10V

74-360

Minilux Control Lux Off on delay

Mode

Dim

off Time

±1h

Set +

Set -

Input Supply voltage Max. load

230 V AC +/–10 % max. 40 mA (not short circuit-proof) Power consumption approx. 3 W Signal from light sensor 0-10 V

Movement Push button sensor PushMovement sensor 41-262 (optional)

• •

Technical data

Connection

Test

Output Dimmer output: Load R, Incandescent lamps 40...400 W L, Inductive (iron core transf.) 40...400 VA C, Capacitive (electronic transf.) 40...400 VA Derating in accordance with See left Output must not be connected in parallel and load types L and C must not be mixed Secondary voltage Ripple

L 2

D 3

L N

230 V AC

Connection With separate light sensor Light Movement Push button sensor 41-272 sensor (optional) PIR

Lux NPN

0-10V

24 V DC +/– 10 % max. 0.5 Vpp

Performance Movement sensor 41-262/272 max. 8 units Lux on setting range 3...270 lux Lux range tolerance +/– 10 % Dim value 20...90 % Off delay 0...60 mins Positive hysteresis 10 % Protection class IP20 Back-up for clock > 2 hours once unit has been connected for more than 5 minutes Insulation class Class II product Clock stability at 20°C per day +/– 1 sec Ambient temperature +5° C...+50° C Approvals CE in accordance with

74-360

Minilux Control Lux Off on delay

Mode

off Time

Set +

Dim

EN 60669-2-1

N 1

L 2

Pmax Derating

±1h

Set -

When Minilux Control detects that the daylight level is above the set lux value (Lux on), it switches off the light. If movement causes the light to come on at maximum power, the light will only go off once the set time (Off delay) has expired. Night blocking Minilux Control has an integrated clock function that allows the light to be switched off (blocked) for a predetermined period of time, e.g. overnight. During this period, Minilux Control will turn the light on to maximum level whenever the PIR detects movement.

Test

Order numbers Product

D 3

300

230 V AC

Movement sensor If the connected movement sensor is activated, the light increases to maximum. When the sensor no longer detects movement, the light remains on at the maximum light level for the preset time (Off delay), after which time the light returns to its dimmed setting.

400

350 D

Minilux Control 74-360 continuously measures daylight levels. If the daylight level is below the set lux value (Lux on), Minilux Control switches on the lighting at a set Dim level.

Light sensor Can be connected separately if necessary.

Derating P [W / VA]

For 230 V AC Dim function for 20-90 % Integrated clock function for night blocking Setting of Dim, lux and time on control Automatic detection of load RL/RC Test function Push button for manual turn on/off the light

ta [°C]

Minilux Control Dim PIR sensor w/ LS. PIR sensor IP54 cover Minilux light sensor

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Type

74-360 41-262 41-272 41-902 43-198

EAN no.

5703102 203274 5703102 203229 5703102 203564 5703102 203458 5703102 203595

Indoor lighting control

Product data Dimensions

Control for switching on and off the light automatically. Programming via LCD display

36-080

• 1st priority: daylight 35

• • • • •

Connection- indoor lighting control Safeswitch (optional) 41-272

43-197

PIR

Lux 0-10V

NPN 1

Push button for switching on (optional)

Input Supply voltage Load

230 V ± 10 % 50 Hz max. 40 mA (not short circuit-proof) Power consumption approx. 2 W Signal from light sensor 0-10 V

PIR 2

Lux Lux range on

Off delay Test

App In

Out

Mode

Set +

Test

Set -

Lux

Minilux Control

36-080

4 C

Output Relay 0-10V contact NO, µ10 A, 250 V AC Max load: Incandescent lamps 2.300 W Fluorescent tubes, not comp. 1.200 VA Halogen incandescent lamps 500 W capacity 140 µF 1 Max.2compensation 3 Max. starting peak 80 A / 20 ms Output voltage 24 V DC ± 10 % Ripple max. 0,5 Vpp

NPN

Technical data

Performance Lux range

L N

Approval CE according to

Display

36-080

Function The lighting will only be switched on when the movement sensor is activa-ted, and only if the light sensor measures insufficient daylight. If there is sufficient daylight the sensor will switch off the lighting after 1 min., even if the controller’s cut off delay has expired. Products for this function: 36-080 + 41-272 + 43-197 The Control 36-080 switches on the light immediately after a power failure for one minute, and on startup. You can change function from automatic on to manual on by placing a jumper between øC3 and øC2 and by connecting a push button. Possibility of manual switch off (Save switch) via push button. In test mode the lighting is switched on for 5 seconds everytime there is activity from the movement sensor. Enclose the product you will find a calculation form, which you can use for correct setting and as documentation by projects. The product is also for outdoor lighting control.

Minilux Control

Lux Lux range on

Off delay Test

App In

Out

Mode

EN 60669-2-1

2nd priority: movement sensor 230 V AC LCD display 3 lux ranges Test function Possibility of manual functions

Order numbers

Set +

Product

Control

Type

EAN no.

36-080 5703102 203298 Indoor R2

Test

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Set -

Product data Dimensions

Control On/Off, 24 V DC, 1-3 channels

78-000 60 50 70

29,2

Optimal daylight control with zone-based light control Energy saving up to 60 %

• •

60 50

29,2

Technical data

Application example (See more overleaf)

• • •

Input Power supply

41-272

43-197

PIR

LUX

24 V DC ±10 % SELV Via RJ 12-1 Power consumption, act./standby 4 VA/1 VA Output Load

Luxstat control On/Off 78-000 Control On/Off 78-000

Output signal CH1-2-3 Connected via Power Pack 78-983

Connected via Power Pack 78-983 NPN 24 V, ≥ 25 mA Max 40 mA Via RJ 12-1

Performance On delay (Lux) Off delay (Lux) Off delay (PIR) Hysteresis Protection class Ambient temperature

Buswires

0-60 sek. 0-60 min. 1-60 min. 10-80 % IP 20 5° C...50° C

Approvals CE according to

78-901 Buswire with adapter

EN 60669-2-1

Standard pre-programmed from factory 5 pre-programmed applications Settings via the display Choose 1, 2 or 3 zones Topical light level in display

Control 78-000 is intended for indoor lighting control from one to three zones. The controller is pre-programmed for several standard applications. One light sensor, a 4-push button switch, movement and presence sensors can be connected to the controller. The controller automatically detects connected devicess. A 78-983 type Power Pack can be used as a power supply (SELV) for the controller. In the Power Pack there are three relay outputs for 230 V. Bus-wire 30 cm is enclosed controller, 78-000. More information on www.servodan.com

78-902 Buswire

Application table Light sensor 43-197

Movement sensor

Push button Push button switch by door switch by black74-593 board 74-593

Time switch

4-push but- Energy-saving ton switch switch 74-592

App.

Auto

00.01

Auto

I/O

I/O Auto

01.01

I/O

02.01

03.01

Auto I/O

Order numbers

Produkt

* *

I/O

* Optional

Auto

04.01

Control On/Off Bus-wire adaptor Power Pack Light sensor 4-push button Push button PIR movement sensor

Type

78-000 78-901 78-983 43-197 74-592 74-593 41-272

EAN nr.

5703102 201348 5703102 201638 5703102 201379 5703102 203311 5703102 201461 5703102 201478 5703102 203564 R4

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Application 00.01 E.g. Corridors/Halls (factory setting)

Control On/Off 78-000 Luxstat control On/Off 78-000

LUX

Luxstat control On/Off 78-000 Control On/Off 78-000

43-197

PIR

LUX

Luxstat control On/Off 78-000 Control On/Off 78-000

74-593

Application 03.01 E.g. School premises • 2 channel daylight control on/off, 1 channel on/off • Manual on/off, automatic off via movement sensor Function description: www.servodan.com

Application 04.01 E.g. Production premises

43-197 LUX

• 3-zone daylight control • Manual on/off via an external time switch

• 3-zone daylight control • Manual on/off • Automatic off via external timer switch

Luxstat control On/Off 78-000 Control On/Off 78-000

Function description: www.servodan.com

Connected via Power Pack 78-983

Application 02.01 E.g. storeroom • 3-zone daylight control • Manual on/off • Automatic off via movement sensor Function description: www.servodan.com

Push button switch by door 74-593

4-push button switch 74-592

ØV

Push button at blackTimer board switch 74-593

Energysaving switch

Movement sensor 41-272

Light sensor 43-197

PIR

Lux 0-10V

NPN

Connected via Power Pack 78-983

LUX

Connected via Power Pack 78-983

I/O

41-272

43-197

PIR

Control On/Off 78-000 Luxstat control On/Off 78-000

Function description: www.servodan.com

Connected via Power Pack 78-983

74-593

• 3-zone daylight control • Automatic on/off via movement sensor

Application 01.01 E.g. Exhibition premises

43-197

41-272

Function description: www.servodan.com

Connected via Power Pack 78-983

74-593

I/O

LUX

74-593

Auto

PIR

74-592

Auto

43-197

41-272

ØH

Function description for factory setting Application 00.01

A 1

When the movement sensor detects activity, the 3-zone on/off daylight control is switched on. As long as there is activity, the light will now be daylight-controlled in three zones in accordance with set parameters.

11 12

B Luxstat Power Pack

78-983

4 5

A 1

78-000

Luxstat Control On /Off

Servodan A/S 20000 Lx

230V 24V 1A µ 10A 250V

As daylight incidence increases, the light in the premises will be switched off depending on the set levels.

RJ12-1 6 polet

The light switches off automatically after a preset period when the movement sensors do not detect any movement in the coverage area.

RJ12-2 6 polet

D 1

RJ 12

Option for manual on/off via switch. L1

www.servodan.com

L2 L3 N

1 2 3

CH 1

CH 2

CH 3

NPN 24V, ≥ 25mA Max 40 mA

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Luxstat Control DIN 24 V DC, 1-3 channels

78-050 60 50 29,2

Optimal daylight control with zone-based light control Energy saving up to 75 %

• •

60 50

29,2

Technical data

Application example (See more overleaf) 41-272

43-197

PIR

LUX

Input Power supply

• • •

Output Load Connected via Power Pack 78-983 Output signal CH1-2-3 NPN 24 V, ≥ 25 mA Max 40 mA Via RJ 12-1 Output signal to HF CH1-2-3: 1-10 V/50 mA Output signal 1-10V minimum: 1-4 V Output signal 1-10V maximum: 6-10 V

The Luxstat Control DIN 78-050 is intended for indoor lighting control from one to three zones with dimming.

Performance Off delay (Lux) Off delay (PIR) Ramp time Energy saving (Loadshed) Protection class Ambient temperature

One light sensor, a 4-push button switch and movement sensors can be connected to the Luxstat Control. The controller automatically detects connected devices.

24 V DC ±10 % SELV Via RJ 12-1 Power consumption, act./standby 6 VA/2 VA

Luxstat control DIM 78-050

Connected via Power Pack 78-983

• •

Elect. Ballast / Light Dimmer 1 - 10V

Buswires

78-901 Bus-wire with adaptor

Approvals CE according to 78-902 Bus-wire

0-20 min/∞ 1-60 min. 5-60 sek. 0-10 V IP 20 5° C...50° C EN 60669-2-1

Input RJ12-2: Not to be used! Intended for updating software.

Application table

Light sensor 43-197

Movement sensor

Standard pre-programmed from factory 5 pre-programmed applications Programmed via the display Measures the daylight automatically Input for energy saving Choose 1, 2 or 3 zones Topical light level in display

Push button Push button switch by door switch by black74-593 board 74-593

Time switch

4-push but- Energy-saving ton switch switch 74-592

App.

Auto

10.01

Auto

The Luxstat Control DIN is preprogrammed for several standard applications.

The load shedding capability can reduce light level during critical periods. A 78-983 power pack is used as the voltage supply (SELV) for the Luxstat Control DIN, and to control outputs. Bus-wire 78-902 is delivered with control 78-050. Bus-wire 78-901 with terminal screw connections is not included. To find out more see www.servodan.com

I/O

I/O Auto

11.01

I/O

12.01

13.01

Auto I/O

* *

I/O

* Optional functions

Auto

14.01

Order numbers Product

Control DIN Bus-wire adaptor Power Pack Light sensor

Type

78-050 78-901 78-983 43-197

EAN no.

5703102 201355 5703102 201638 5703102 201379 5703102 203311 R4

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data

Elect. Ballast / Light Dimmer 1 - 10V

LUX

Elect. Ballast / Light Dimmer 1 - 10V

Connected via Power Pack 78-983

41-272

43-197

PIR

LUX

43-197

PIR

LUX

Application 13.01 E.g. School premises • 2-zone daylight control • Manual on/off • Manual on/off blackboard lighting • Automatic off via movement sensor

Elect. Ballast / Light Dimmer 1 - 10V

Function description: www.servodan.com

74-593

Application 14.01 E.g. Production premises

43-197 LUX

• 3-zone daylight control • Manual on/off • Automatic off via external time switch

Luxstat control DIM 78-050

Function description: www.servodan.com

Push button switch by door 74-593

4-push button switch 74-592

ØV

Push button at blackTimer board 74-593 switch

Energysaving Movement switch sensor 41-272

Light sensor 43-197

PIR

Lux 0-10V

NPN ØV

Function description: www.servodan.com

Elect. Ballast / Light Dimmer 1 - 10V

Connected via Power Pack 78-983

• 3-zone daylight control • Manual on/off • Automatic off via movement sensor Elect. Ballast / Light Dimmer 1 - 10V

41-272

Connected via Power Pack 78-983

Application 12.01 E.g. Ofﬁces/conference premises

Luxstat control DIM 78-050

Connected via Power Pack 78-983

Function description: www.servodan.com

• 3-zone daylight control • Manual on/off via an external time switch

Luxstat control DIM 78-050

74-593

Luxstat control DIM 78-050

Application 11.01 E.g. Exhibition premises

43-197

74-593

• 3-zone daylight control • Automatic on/off via movement sensor

Luxstat control DIM 78-050

Connected via Power Pack 78-983

74-592

I/O

Application 10.01 E.g. Corridors (factory setting)

Auto

LUX

I/O

43-197

PIR

Auto

41-272

ØH

Function description: www.servodan.com

Function description for factory setting Application 10.01

A 1

11 12

The light switches on when the movement sensor detects activity and there is a need for light. As long as there is activity, the light will now be daylight-controlled in three zones in accordance with set parameters.

B Luxstat Power Pack

78-983

A 1

78-050

Luxstat Control Dim

Servodan A/S 20000 Lx

230V 24V 1A µ 10A 250V

As daylight incidence increases, the light dims in the premises so that the set, required, minimum light level is obtained.

RJ12-1 6 polet

D 1

RJ12-2 6 polet

RJ12-1 6 polet

The light switches off automatically after a preset period, when the movement sensors do not detect movement in the coverage area, or when a sufficient light level has been achieved in the room. Option for manual on/off and dimming via switch.

D 1

Elect. Ballast Light dimmer

N L1

N L2

1-10V Com1

Elect. Ballast Light dimmer N

1-10V Com2

1-10V Com3

L1 L2

www.servodan.com

L3 N

RJ 12 Pin

1 2 3

CH 1

CH 2

CH 3

NPN 24V, ≥ 25mA Max 40 mA R4

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

60 50 70

29,2

Product data Dimensions

Luxstat Power Pack power supply for Luxstat Controls

78-983 60 50

29,2

• • • • Technical data

Ch 2

Ch 3

Ch 1

24V DC

Connection

Input Power supply 230 V 50 - 60 Hz Power consumption, act/standby 30 W/1,2 W Input CH1-2-3 NPN 24 V, ≥ 25 mA Low level ≤ 2 V

+ 1

11 12

Luxstat Power Pack

78-983

230V 24V 1A µ 10A 250V

RJ12-1

RJ12-2

RJ12-3

RJ12-4

L1 L2

The Power Pack 78-983 is mainly used as a power supply and relay module for the Luxstat Control 78-0X0. Connects to a Luxstat Control using an RJ12 adapter (supplied with the Luxstat Control).

Output Relay contact NO, µ10 A, 250 V AC Max load CH1-2-3: Incandescent lamps 2.300 W Fluorescent tubes, not comp. 1.200 VA Compensation capacity 140 µF Max. starting peak 80 A / 20 ms Output voltage (SELV) 24 V DC ±10 % max. 1A

The built-in protection is activated when an overload occurs. This protection is reset on power down.

Performance Protection class Ambient temperature

NPN movement sensors can be connected directly to the Power Pack.

Approvals CE according to

Power supply: 230 V AC Secondary: 24V DC ±10 %, max. 1A Built-in protection against overload For DIN rail installation

IP 20 -10° C...+50° C

The power supply can be loaded with a maximum of 1 A. An LED on the front of the unit illuminates when 230 V is connected.

EN 60669-2-1

Connection Input Power supply 230 V AC

Output

D1, D2

Output voltage 24 V DC

B1, B2

CH1

B4, B1, B2

D3, D4

CH2

B5, B1, B2

D5, D6

CH3

B6, B1, B2

D7, D8

RJ12 - 1 For connection of Luxstat Control 78-xxx only Pin1 + 24V DC ±10% (SELV) Pin2 - 24V DC ±10% (SELV) (ground) Pin3 I/O Not used. Pin4 Ch1 NPN 24V, ≥ 25mA Pin5 Ch2 NPN 24V, ≥ 25mA Pin6 Ch3 NPN 24V, ≥ 25mA

RJ12 - 2 / RJ12 - 3 / RJ12 - 4 connections: Pin1 + 24V DC ±10% (SELV) Pin2 - 24V DC ±10% (SELV) (ground) Pin3 I/O Not used. Pin4 Ch1 (RJ12-2) NPN 24V, ≥ 25mA (Input for control) Pin4 Ch2 (RJ12-3) NPN 24V, ≥ 25mA (Input for control) Pin4 Ch3 (RJ12-4) NPN 24V, ≥ 25mA (Input for control) Pin5 Not used. Pin6 Not used.

Order numbers Product

Power Pack Bus-wire adapter

Type

EAN no.

78-983 5703102 201379 78-901 5703102 201638 R4

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data 74-592

Technical data

4-push button switch for Luxstat Control 78-0XX

4-push button, Opus

For flush mounting Dimensions Protection class Voltage Power consumption

Model OPUS 66 x 66 mm IP 20 5-24 V DC Max. 24 mW/diode @ 24 V DC Cable dimension single core Ø 0,3 to 0,6 mm multi core Ø 0,4 to 0,8 mm Looping Max. two of the same dimensions For plate mounting, mounting plate type 74589 is used.

Order numbers Product

Type

EAN no.

4-push button, Opus 74-592 5703102 201461 Mounting plate, white 74-589 5703102 005106

74-593

Technical data

Push button for Luxstat Control 78-0XX For flush mounting Dimensions Protection class Voltage Cable dimension

Push button, Opus

Model OPUS 66 x 66 mm IP 20 5-24 V DC Min. Ø 0,6 mm

For plate mounting, mounting plate type 74589 is used.

Order numbers Product

Type

EAN no.

Push button, Opus 74-593 5703102 201478 Mounting plate, white 74-589 5703102 005106 R1

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Luxstat control box for 2 zone control with potential free relay, 230 V AC

77-050 202

145

• • • Technical data

Connection

Input Supply voltage 230 V AC 50 Hz ±10 % Power consumption <1W 230V~

230V~ 230V~

Output Relay zone 1 and 2 NO, µ 10 A Relay On/Off NO, µ 10 A Load: Incandescent lamps 2300 W Fluorescent tubes, not compensated 1200 VA Halogen incandescent lamps 2300 W Energy-saving lamps 58 pcs. (18W) Max. compensation capacity 140 µF Max. starting Peak 80 A/20 m sec. Secondary voltage 24 V DC Max. load 100 mA

+ -

RJ12 ø10 ø9 ø8 ø7 ø6 ø5 ø4 ø3 ø2 ø1 ø12 ø11 L’ N L’ N L N DC DC External Relay IR Sensor Zone 1 Zone 2 On/Off

Luxstat DIM w. IR 77-050

ø13 + 24V DC ø14 ø15 Lux ø16 PIR ø17 Pushbutton 1 ø18 Pushbutton 2

230 V~ ±10% 50 Hz µ 10A

IP20

2300 W 1200 VA

77-050 Luxstat DIM w. IR

Zone 1

Zone 2

230V

ø10 ø9 ø8 ø7 ø6 ø5 ø4 ø3 ø2 ø1

+ L’ N Elect. ballast Light Dimmer

ø12 ø11

+ L’ N L N Elect. ballast Light Dimmer

DC -

Relay On/Off

DC +

Performance Zone 1 + 2 DIM Off delay (PIR) Lux range Light sensor Indoor Setpoint Protection Enclosure Ambient temp.

1-10 V / max. 10 mA 1-60 min. 30-3000 Lux 50-1000 Lux 50-1500 Lux ClassIP 20 Class II -5° C...+50° C

Approvals CE according to

EN 60669-2-1

Principle Light sensor 43-197

Luxstat control box for controlling 1-10V, potential free relay and built-in IR-receiver External units like sensors, push-buttons, luminaires etc. are connected directly to the Luxstat Easy mounting and installation directy in the room – no connection to distribution boards.

The Luxstat controller, type 77-050, consists of an integrated unit containing 1-10 V control, a potential-free relay and an integral IR receiver. All external units, such as motion sensors, push-buttons, light sensors and luminaires are connected directly to the Luxstat unit, which can be wallmounted directly in the room. If the Luxstat unit is installed above a false ceiling, it can be connected to an external IR receiver, type 77-910 (optional) via an RJ12 plug so that an IR remote control, type 77-920 (optional) can be used. The Luxstat control box can be installed and operated using the factory settings for 2 zones and 3 applications: • Manual switch on/off via pushbutton – automatic switch off via movement sensor • Automatic switch on/off via movement sensor • Class room solution with manual switch on, aut. switch off 1 og 2 push-buttons can be used optional. Using 2 push-buttons enables switching off the light in zone 1 and 2 individually. The controller also contains a potential-free relay for controlling ventilation, CTS or similar.

DIM 1-10 V + 230 V DIM 1-10 V + 230 V Pot.free relay, pre-set to off delay + 10 min.

PIR sensor, 24V 77-050

Push-button

77-910

All connections are made directly to the controller, which contains a 24 V DC power supply for sensors. Alle Servodan 24 V DC movement sensors can be connected to the Luxstat.

Order number 230V AC

Product 77-920

Luxstat control box External IR receiver IR-remote

Type

EAN no.

77-050 5703102 204523 77-910 5703102 205049 77-920 5703102 204691 R2

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Technical data

77-910

Dimension Diameter Depth Mounting whole in ceiling Cable length

Ă&#x2DC;38 mm 47 mm Ă&#x2DC;32-35 mm 100 cm

The IR receiver is eqipped with a RJ12-plug, which can be connected directly to the Luxstat controller, 77-050. If the Luxstat unit is installed above a false ceiling, it can be connected to the external IR receiver in order to set the Luxstat controller.

External IR receiver

Order number: Product

External IR receiver

77-920

Technical data Dimension Range Battery type

Type

EAN no.

77-910 5703102 205049

IR remote H: 100 mm W: 55 mm 2-3,5 m CR 2032 3 V

The IR remote for Luxstat control in order to change the factory settings, to choose between various applications, to set daylight factor, to dim light etc.

Order number: Product

IR remote

Type

EAN no.

77-920 5703102 204691 R1

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Luxstat Wireless Control type 79-050

79-050 36

112

• 143

• •

+ - Wired PIR sensor PIR

Power supply 24V DC

+ - Light Sensor Lux

Technical data

Connection

Input Supply voltage Power consumption Active Standby

24 V DC 6 VA 2 VA

CLR

LRN

Output Terminal for cut-off signal Load

- ø1 24 VDC + ø2 Lux ø3 Cut-off ø4 PIR ø5

max. 40 mA

Luxstat LED Control 79-050

Performance Receiver

24 VDC Freq.: 868,3 MHz / 2,4 GHz IP20

Can be used with following luminaires • 1-colour LED • 4-colour LED (RGB-W)

EnOcean RCM 130, standard protocol 868 MHz and wireless 2.4 GHz Transmitter Wireless 2.4 GHz Transmission (free field) 50 metres LED indicator For received “learn” signal Enclosure class IP 20 Insulation class Class II Ambient temperature -5° C to +50° C Approvals EnOcean approval

• 1-10 V-signal (1-10 V ballast) • On/off (standard ballast)

See www.servodan.dk

LED Luminaire, wireless with Servodan luminaire control

Light sensor, wired 24 V

21.1 Exhibition room Daylight control in 3 zones On/Off via wireless push-button or another wireless transmitter, i.e. clock-signal 22.1 Office/conference room Daylight control in 3 zones Manual On/Off – Off via movement sensor 23.1 Classrooms Daylight control in 2 zones Manual On Manual On/Off of blackboard light Off via movement sensor 24.1 Manufacturing premises Daylight control in 3 zones On/Off via wireless push-button Off via push-button or another wireless transmitter, i.e. clock-signal

and/or

Order numbers

Dim – On/Off 1-10 V

1-10 V

L’

24 V DC 230 V

Push-button, wireless

20.1 Hall areas Daylight control in 3 zones On/Off via movement sensor

24 V

PIR sensor, wired

PIR sensor, wireless

The Luxstat Wireless Control contains 5 pre-set applications and 1 user-defined application, which easily can be set via the menu in the Basic installation software.

25.1 User-defined Can be set to: Daylight control in 3 zones Division of rooms in up to 5 areas Optional function for push-button and movement sensor

Principle

79-050

Daylight-based lighting control of up to 3 zones and with the possibility of division up to 5 areas Wireless communication between sensors, pushbuttons and luminaires Wireless installation via laptop, USB-stick and userfriendly Windows software.

230 V

Cut-off control, wireless, for luminaires 79-210

230 V

Product

Luxstat wireless controll Luxstat wireless cut-off control Luxstat power supply Luxstat USB-stick Luxstat basis software

Type

EAN no.

79-050 5703102 204592 79-210 5703102 204844 79-980 5703102 204660 79-930 5703102 204639 79-990 5703102 204684 R0

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Luxstat Wireless Cut-off Control type 79-210

79-210 36

112

• 143

• •

Technical data

Connection

230V AC In

230V AC Out

1-10V out to Elect. ballast or Light Dimmer

Input Supply voltage 230 V AC 50 Hz ±10 % Power consumption <3 W

ø1

ø4

ø2 L

N ø5

ø3 N

L’ ø6

Luxstat Cut-off Control 79-210

L-N 230V 50Hz 1-10V µ, 10A + Freq.: 2,4 GHz 2300W / 1200VA IP20

ø7 ø8

Output Relay contact NO, µ 10 A Load Incandescent lamps 2300 W Fluorescent tube uncompensated 1200 VA Halogen incandescent lamps 2300 W Max. compensation capacity 140 µF Energy-saving lamps 58 pcs. (18 W) Max. starting peak 80 A/20 m sec. DIM 1 - 10 V / max. 50mA Performance Receiver RF range Enclosure class Insulation class Ambient temperature Approvals CE pursuant to

Wireless 2.4 GHz 30 metres IP 20 Class II -5° C to +50° C. EN 60669-2-1

Wireless communication with Luxstat Wireless Control type 79-050 Luminaires are connected directly til Luxstat Cut-off control Wireless installation via laptop, USB-stick and userfriendly Windows software.

The Luxstat Cut-off Control 79-210 is used together with the Luxstat Wireless Control (79-050) controls for indoor daylight-based lighting cntrol in 1 or more zones. If daylight control is needed in 1 or more zones, 1 Luxstat Cut-off control is used per zone. If the room needs divided in up to 5 areas, 1 Luxstat Cut-off control is used per area. The Luxstat Cut-off control is used for controlling luminaires equipped with ballast, 1-10 V ballast for dim or standard ballast for On/Off control. The Luxstat Cut-off control can supply luminaires with 230 V and control signal 1-10 V. If standard ballast for On/Off control is connected only the relay output on the Luxstat Cut-off control is used. If 1-10 V for dim control is used, the 230 V supply for the luminaires is disconnected (Cut-off), when the light is dimmed to minimum. Every Luxstat Cut-off Control can operate up to 100 luminaires (1-10 V signal).

Principle Zone 1

Dim: 1-10 V On/off: 230 V

Zone 2

Dim: 1-10 V On/off: 230 V

Zone 3

Dim: 1-10 V On/off: 230 V

79-050 79-210

230 V

79-210

230 V

79-210

230 V

Order number Product

24 V DC

Luxstat wireless cut-off control

Type

EAN no.

79-210 5703102 204844 R1

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data 79-930

Description

The Luxstat USB-stick enables you to perform installation and configuration of the components in the Luxstat wireless lighting system on site after having installed and connected the various components - controllers, luminaires, sensors, push-buttons etc.

Luxstat USB-stick

Order numbers Product

Luxstat USB-stick

79-990/79-995

79-980

Description

The basic installation software enables you to configure the Luxstat wireless lighting system according to a range of standard applications. With the service softwaren you can change the factory settings and adjust the • function settings for push-buttons • function settings for PIR sensor • energy-save settings – reducing the light level with 0-100 % • comfort light settings between 0-100 % etc.

Technical data

EAN no.

Luxstat Installation Software – Basic & Service

Order numbers Product

Luxstat basic software Luxstat service software

Type

EAN no.

79-990 5703102 204684 79-995 5703102 205063

Power supply, 24V DC/30W

Power Supply for Luxstat Wireless Controller

Supply voltage 230 V ~ ±10 % Output voltage Norm. 24 V DC Load 30W Temperature cutout for transformer 125° C Ambient temperature +10° C...+40° C Protection class IP 20 Dimensions Width 143 mm Height 30 mm Cable lenght 300 mm

Order numbers Product

Power supply (Controller)

79-981

Type

79-930 5703102 204639

Technical data

Power supply, 24V DC/60W Supply voltage 230 V ~ ±10 % Output voltage Norm. 24 V DC Load 60W Temperature cutout for transformer 125° C Ambient temperature +10° C...+40° C Protection class IP 20 Dimensions Width 180 mm Height 35 mm Cable lenght 300 mm equipped with Wieland connection, type 92.932.3053.1 on primary side (230 V)

Type

EAN no.

79-980 5703102 204660

Power Supply for LED Luminaires

Order numbers Product

Power supply (Luminaire)

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Type

EAN no.

79-981 5703102 204745 R0

Product data Power Pack with built-in relay

36-982

Dimensions 54

• • • •

Power Pack 36-982/36-984 is designed for fitting in boards on DIN rails.

Power Pack is a stabilised direct current supply with an in-built relay function.

Technical data

Connection

Fig. 1

Input Supply voltage 230 V ± 10 % 50 Hz Power consumption 4W Power loss (incl. inherent consumption) 6 W

43-2XX PIR

Constant lighting (switch)

NPN 1

Output NO, µ10 A, 250 V AC Relay contact Max load: Incandescent lamps 2.300 W Fluorescent tubes, not compensated 1.200 VA Halogen incandescent lamps 500 W Compensation capacity 140 µF Max. starting peak 165 A / 20 ms Secondary voltage 24 V DC ±10 % Ripple max. 0,5 Vpp Load max. 40 mA (not short circuit-proof)

36-982

Power Pack

230V ~ 24V 40mA µ, 10A 250V ~

Performance Protection class Insulation class Ambient temperature

IP 20 Class II -10° C ... +50° C

36-982 NPN Relay ON Fig. 2 43-2XX

36-984 PNP Relay ON

43-2XX PIR NPN

NPN

PIR

Approvals CE pursuant to 1

36-982

Power Pack

230V ~ 24V 40mA

L N

36-982

Power Pack

Cable dimension: 4 x 0,75 2 x 2 x ø 1,0 mm 2 x 2 x ø 0,8 mm 2 x 2 x ø 0,6 mm 2 x 2 x ø 0,4 mm

Terminal 3 to 2 (-) Low level 0-2 V / max. 20 mA Terminal 3 to 1 (+) High level 20-24 V / max. 1 mA

Power Pack is designed to be connected to sensors with NPN outputs (Type 36-984 for PNP). If constant light is required, a switch/ relay can be installed. If several 36-982 units are used, they can have their own phase. Hint! In Fig. 2, one unit can be daylight-controlled, while the other is controlled by motion alone. Max connection:

Type

Fig. 1

Fig. 2

43-205

43-208

43-215

43-222

43-225

More... It is possible to connect up to 16 sensors by using power supply type 78-980. Please see datasheet for 78-980.

EN 60669-2-1 max. 100 m max. 100 m max. 50 m max. 25 m max. 15 m

230V ~ 24V 40mA

µ, 10A 250V ~

For 230 V AC 24 V DC secondary voltage For DIN rails NPN input

µ, 10A 250V ~

Order numbers Product

Power Pack NPN Power Pack PNP

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Type

EAN no.

36-982 5703102 203496 36-984 5703102 203519

60 50 70

29,2

Product data Dimensions

Power Supply Stand alone power supply

78-980 60 50

• • •

29,2

•

Primary: 230 V AC Secondary: 24V DC ±10 %, max. 1A Built-in protection against overload For DIN rail installation

Power Supply 78-980 is designed as a stand alone power supply.

Technical data

Front

Input Power supply 230 V 50 - 60 Hz Power consumption, act/standby 30 W/1,2 W Output Output voltage (SELV) Performance Protection class Ambient temperature Approvals CE according to

24 V DC ±10 % max. 1A

When overloading occurs, the built-in protection operates. The protection is reset on power down. The power supply can be loaded with a maximum of 1 A. An LED on the front of the unit illuminates when 230 V is connected.

IP 20 -10° C...+50° C EN 60669-2-1

Connection

78-980 36-982

36-982

Combination 78-980+36-982 Max. 4 sensors connected to 36-982 Total: Max. 16 sensors connected to system

Order numbers Product

Power Supply

Type

EAN no.

78-980 5703102 201775 R1

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Movement sensor PIR for indoor lighting control. For flush mounting and plate mounting.

41-270

Dimensions

• 24 V DC • Can be wired as for low-voltage • The front cover determines the

Connection

• PIR

41-270

NPN 1

Input Supply voltage 24 V DC ±10 % Max. current load 50 mA (24 V DC) Power consump. - worst case <5 mA (24 V DC) Power consump. - standby <3 mA (24 V DC)

Minilux Control

36-080 Lux Lux range on

Off delay Test

App In

Out

36-080

Mode

Set +

Test

Set -

Technical data

Output Output signal

L N

90°/40° 0,4...5 m IP20 Max 200 m 2 x 2 x 0,6 mm -20° C...+50° C

Ambient temperatur

PIR NPN

41-270

On/Off, NPN

Performance Detection angle Detection range Protection class Cable lenght

detection range Mounting at the ceiling and on the wall

Sensor PIR 41-270 is a passive infra-red movement sensor which responds to temperature changes and movements by people. The Sensor is designed for flush mounting or mounting on a junction box (plate mounting). If you turn the front cover 90° you get a detection range of 40°. The bottom part can be rotated, so that it fits for mounting on the wall or at the ceiling. After connection to the power supply, the Minilux PIR Sensor is ready for operation after 1-2 min. (power-up time). The sensor is adapted to the Euro-junction system.

9 10

A 1

10 11 12

Luxstat Control DIM

78-050

Servodan A/S 20000 Lx

Parallel connection 41-270

78-0X0

41-270

PIR NPN

PIR

1 RJ12-1 6 polet

NPN

RJ12-2 6 polet

D 1

Detection area

1m = 2m x 0,1m 2m = 4m x 0,2m 3m = 6m x 0,3m

1m = 0,8m x 0,1m

Order numbers

2m = 1,5m x 0,2m

Product

3m = 2,3m x 0,3m

4m = 8m x 0,4m

4m = 3,1m x 0,4m

5m = 10m x 0,5m

5m = 3,8m x 0,5m ~0,5m

~0,5m °

~10m / 90

~3,8m / 40

Sensor PIR

41-270 5703102 203540

Type

EAN no.

Junction for: - masonry wall - sheet wall - plate mounting Bracket for 54-905

54-903 54-904 54-905 54-906

5703102 001917 5703102 001924 5703102 001931 5703102 001962 R2

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data 41-271

Dimensions

Movement sensor PIR for indoor lighting control

109

• • • • •

12 V DC Sensitivity setting Built-in walk-test function 90° detection angle Detection range up to 15 meter

Connection

Sensor PIR 41-271 without built-in light sensor, is a universal sensor for 12 V DC. With NPN output.

V°

Technical data 41-262 / 41-272

Meter

M 15 7,5 4

3 1,5

V 0° 5° 10° 20° 45°

Supply voltage 12 V DC ±10 % Output signal On/Off, NPN Detection angle 90° Detection range 0,5...15 m Max. current load 50 mA (12 V DC) Power consump. - worst case <5 mA (12 V DC) Power consump. - standby <3 mA (12 V DC) Protection class IP20 Ambient temperatur -20° C...+50° C Cable entry 2 x Ø 5 mm Cable lenght Max 200 m 2 x 2 x 0,6 mm

The sensor PIR 41-271 is a passive infrared movement sensor which responds to temperature changes and movements by people. The sensor PIR is supplied with brackets for ceiling and wall installation. After connection to the power supply, the sensor PIR is ready for operation after 1-2 min. (power-up time).

Sensitivity setting Normal

Min.

Max.

Order number: Product

Sensor PIR 12 V IP54 Cover

Type

EAN no.

41-271 5703102 203557 41-902 5703102 203458 R2

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Movement sensor PIR for indoor lighting control

41-272

109

• 24 V DC • Sensitivity setting • Up to 8 sensors on one Control

• Built-in walk-test function • 90° detection range • Detection lenght up to 15 meter

Connection

PIR NPN

41-272

Input Supply voltage 41-272 24 V DC ±10% Max. current load 50 mA (24 V DC) Power consump. - worst case <5 mA (24 V DC) Power consump. - standby <3 mA (24 V DC)

Minilux Control

36-080 Lux Lux range on

App In

Off delay Test

Set +

Test

Set -

Output Output signal

36-080

Out

Mode

Technical data

Performance Detection angle 90° Detection range 0,5...15 m Protection class IP20 Protection class with cover 41-902 IP54 Cable entry 2 x Ø 5 mm Cable lenght Max 200 m 2 x 2 x 0,6 mm Ambient temperatur -20°C...+50°C

On/Off, NPN

L N

PIR NPN

41-272 1

The sensor 41-272 is a passive infrared movement sensor which responds to temperature changes and movements by people. The movement sensor PIR is used for indoor lighting control. The movement sensor can be connected to Control 36-080, Luxstat Control 78-0X0 and BMS systems fx. Comlux. The movement sensor PIR is supplied with brackets for ceiling and wall installation. After connection to the power supply, the sensor is ready for operation after 1-2 min. (power-up time). Sensor 41-271 is 12 V DC with same specifications as 41-272.

Setting and placement

V°

A B

9 10

A 1

10 11 12

41-262 / 41-272

Luxstat Control DIM

78-050

Meter

3 1,5

V 0° 5° 10° 20° 45°

Servodan A/S 20000 Lx

RJ12-1 6 polet

M 15 7,5 4

78-0X0

RJ12-2 6 polet

D 1

Sensitivity setting Normal

Order numbers Min.

Max.

Product

Sensor, 24 V Sensor, 12 V IP54 Cover

Type

EAN no.

41-272 5703102 203564 41-271 5703102 203557 41-902 5703102 203458 R2

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Movement sensor PIR for indoor lighting control in high-rise warehouses

41-274

109

Dimensions

• • • • • • •

Connection

41-274 NPN

PIR

36-080

Off delay Test

App In

Out

36-080

Mode

Set +

Test

Set -

Input Supply voltage Max. current load Power cons. - worst case Power cons. - standby

Minilux Control

Lux Lux range on

Technical data

On/Off, NPN

Performance Detection angle Detection range Protection class Cable entry Cable lenght

Output Output signal

24 V DC ±10%) 50 mA (24 V DC) <5 mA (24 V DC) <3 mA (24 V DC)

90° Up to 9 m IP 20 2 x Ø 5 mm Max 200 m 2 x 2 x 0,6 mm -20° C...+50° C

Ambient temperatur

24 V DC Mounting height max 8 meters Sensitivity setting Up to 8 sensors on one control Built-in walk-test function 90° detection angle Detection range up to 9 meter

The sensor 41-274 is a passive infrared movement sensor which responds to temperature changes and movements by people. The movement sensor PIR is used for indoor lighting control - especially in high-rise warehouses. The movement sensor can be connected to Control 36-080, Luxstat Control 78-0X0 and BMS systems fx. Comlux. The movement sensor PIR is supplied with brackets for ceiling and wall installation. After connection to the power supply, the sensor is ready for operation after 1-2 min. (power-up time).

Detection range

Max 8 m

1...8 sensors - op til 144 m

Walking direction

Sensitivity setting

3 Normal 4

Max 8 m.

9 m. 1 m.

9 m.

1 Min.

5 Max.

Order numbers Produkt Sensor

Type

EAN nr.

41-274 5703102 203571 R1

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimension (mm)

Movement sensor PIR 360° (24 V DC) for flush mounting

41-440 Ø90

32 24

• Small design and elegant finish - only Ø90 mm • 360° detection angle • Connected to a controller • More sensors can be connected • 4 sensivity settings

Detection Plan view, diameter indicated at floor height (mounted at height 2,5 m)

Technical data

ø4m (12m2) ø7m (38m2) ø4m (12m2) ø7m (38m2)

0,8m

Diameter indicated at table height.

Input Power supply Power consumption Worst case Standby

<5 mA (24 V DC) <4 mA (24 V DC)

Output Max current load Output signal PIR

50 mA (24 V DC) ON/OFF, NPN.

24 V DC ±10 %

Performance Detection range Installation height Sensitivity Protection class Ambient temperature

Depending of the type of controller connected, the PIR sensor 41-440 can control the light, based on the function chosen in the controller. The maximum number of PIR 41-440 in the same system is depending of the type of controller chosen.

360°, dia. ø7-ø12 m 2.5 - 4 m 4 settings IP 20 -5° C…+50° C

Approval CE according to

EN 60669-2-1

ø3m ø3m ø5m

ø5m

Planning To ensure optimal detection at the entrance to the room, reduce the distance between door and sensor, when positioning the sensors. Effective detection of a person is achieved at minimum 0.8 m height above floor level.

Connection: - 2 or more parallel-connected PIR sensors 41-440

Servodan Controller or similar 24V DC ±10% NPN / max. 24V / 50mA

PIR 24V DC 1

NPN

24V DC

41-440

41-440 PIR

Servodan Controller or similar 24V DC ±10% NPN / max. 24V / 50mA

PIR 24V DC 1

NPN

Connection:

Order numbers Product

Sensor PIR 24 V DC

Type

EAN no.

41-440 5703102 204004 R0

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Sensor DT-A An intelligent sensor small movements keep the lighting on.

43-205/215/225

Dimensions

115

• • • • • •

50 76,3

Coverage area to a height of 2.5 meters 0

1,5

4,5

7,5

9 10,5

7,5 6

180°/50 m²

4,5 3 1,5

3,5

6,5

1,5 3 4,5

Type 43-205

6 7,5

1,5

4,5

7,5

180°/100 m²

4,5 3 3,5

6,5

1,5 3 4,5

Type 43-215

6 7,5

7,5

4,5

1,5

Input Power supply voltage 24 V DC ±10 % Power consumpt., 180° max. 18 mA (0,4 VA) Power consumpt., 360° max. 33 mA (0,8 VA)

• • •

Output Output short-circuit protected Movement (blue) NPN, max. 50 mA Movement + light (grey) NPN, max. 50 mA Relay (movement) Potential-free switch max. 24 V DC, 500 mA

The intelligent DT-A occupancy sensor is available in several different models. The differences lie in the area covered and in whether daylight blocking and relay output are required.

Performance Detection angle 180°/360° Detection range 50...200 m² Time delay 8-40 min. Lux range 10-1.000 lux Protection class IP 40 Installation height 2,5..3 m. Ultrasound frequency 32 KHZ, standard Sensor base Ø 129 X 30 mm Cable length to power supply: Cable, double stranded, Ø 0,6 max. 50 m Cable, 0,75 mm² max. 100 m Ambient temperature 0° C...40° C Humidity 0-95 %

The occupancy sensors are selfadjusting, which means that they find the optimal setting for the area automatically.

9 10,5

7,5

1,5

Technical data

Occupancy sensor Combines the advantages of infrared and ultrasound detection For 24 V DC Self-adjusting “Fuzzy logic” No triggering errors Registers small movements down to 2 - 3 cm Blocks in daylight Output for movement, light and ventilation Detection areas 180° and 360°

1,5

4,5

7,5

360°/200 m²

6 4,5

When the two technologies (infrared and ultrasound) are combined, for example a weak infrared signal and a strong ultrasound signal will be sufficient to turn on the lighting. The sensor will thus ensure error-free triggering and register small movements while the lighting is turned on.

3 1,5 0

6,5

Different power supplies are available: 78-980 230 V/24 V DC 1 A 36-982 230 V/24 V DC 40 mA

3,5

1,5 3 4,5

Type 43-225

6 7,5

Detection sensitivity - ultrasound Small movements Body movements

Detection sensitivity - infrared Small movements Body movements

PLEASE NOTE

The detection area is given for an installation mounted at a height of 2.5 meters in an open area without furnishings. Max installation height is 3 meters. If there are partitions in the area the ultrasound detection area may be reduced down to 25 %.

Red +

Grey (movement-controlled + light)

Blue (movement-controlled)

Black -

Black/white

Yellow/white

Blue/white

}

Movement-controlled relay e.g.ventilation/ monitoring etc.

Order numbers Product

43-992

Type

EAN no.

Sensor 50 m² Sensor 100 m² Sensor 200 m²

43-205 5703102 005687 43-215 5703102 005700 43-225 5703102 005724

Power pack Power Supply Sensor base

36-982 5703102 203496 78-980 5703102 201775 43-992 5703102 006189 R3

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data 43-208

Sensor PIR-A - an intelligent, self-adjusting PIR (Passive infrared) sensor

Dimensions

115

• • • • • • •

50 76,3

Covering area to a height of 2.5 meters 4,5

1,5

Input Power supply voltage Power consumption

4,5

4,5 3 1,5 2

3,5

360°/40 m²

1,5 3 4,5

Detection sensitivity - ultrasound Small movements

Technical data

Body movements

NB! The detection area is given for an installation mounted at a height of 2.5 meters in an open area without furnishings. Max installation height is 3 meters.

24 V DC ±10 % max. 18 mA (0,8 VA)

Output Output short-circuit protected Movement (blue) NPN, max. 50 mA Movement + light (grey) NPN, max. 50 mA Relay (movement) Potential-free switch max. 24 V DC, 500 mA Performance Detection angle 180°/360° Detection range 40 m² Time delay 8-40 min. Lux range 20-3.000 lux Protection class IP 40 Installation height 2,5..3 m. Sensor base Ø 129 X 30 mm Cable length to power supply: Cable, double stranded, Ø 0,6 max. 50 m Cable, 0,75 mm² max. 100 m Ambient temperature 0° C...40° C Humidity 0-95 %

Occupancy sensor For 24 V DC Self-adjusting “Fuzzy Logic” Install and forget solution! Blocks in daylight Detection 360° - 40 m² Output for - movement - movement with daylight blocking - Relay (movement)

The occupancy sensor PIR-A is an intelligent sensor based on passive infrared techno-logy. The occupancy sensor is self-adjusting (adaptive) which means that after a testing period the sensor will “learn” to recognise air currents and the periods when the area is in use over a period of four weeks. Thus the sensor will only be sensitive when there is activity, and less sensitive when there are no people present. Different power supplies are available: 78-980 230 V/24 V DC 1 A 36-982 230 V/24 V DC 40 mA

Connection

Red +

Grey (movement-controlled + light)

Blue (movement-controlled)

Black -

Black/white

Yellow/white

Blue/white

}

43-992 Movementcontrolled relay e.g.ventilation/ monitoring etc.

Order numbers Product

Type

EAN no.

Sensor 40 m² PIR

43-208 5703102 005809

Power pack Power Supply Sensor base

36-982 5703102 203496 78-980 5703102 201775 43-992 5703102 006189 R3

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data

43-222

Sensor UL-A An intelligent and selfadjusting ultrasound sensor 200 m²/360°

115

Dimensions

• • • • • •

50 76,3

Covering area to a height of 2.5 meters

7,5

4,5

1,5

4,5

7,5

Technical data Input Power supply voltage Power consumption

24 V DC ±10 % max. 33 mA (0,8 VA)

7,5 6

360°/200 m²

4,5 3 1,5 0 1,5 3 4,5

Type 43-222

6 7,5

Detection sensitivity - ultrasound Small movements Body movements

PLEASE NOTE

The detection area is given for an installation mounted at a height of 2.5 meters in an open area without furnishings.

Output Output short-circuit protected Movement (blue) NPN, max. 50 mA Movement + light (grey) NPN, max. 50 mA Relay (movement) Potential-free switch max. 24 V DC, 500 mA Performance Detection angle 360° Detection range 200 m² Time delay 8-40 min. Lux range 10-1.000 lux Protection class IP 40 Installation height 2,5..3 m. Ultrasound frequency 32 Khz Sensor base Ø 129 X 30 mm Cable length to power supply: Cable, double stranded, Ø 0,6 max. 50 m Cable, 0,75 mm max. 100 m Ambient temperature 0° C...40° C Humidity 0-95 %

Occupancy sensor For 24 V DC Registers small movements down to 2 - 3 cm No triggering errors Install and forget solution! Output for - movement - movement with daylight blocking - Relay (movement)

The occupancy sensor UL-A has allround 360° detection and detects via ultrasound. The sensor is therefore suitable for turning lighting on and off automatically in conference rooms, large teaching areas, open-plan offices etc. The occupancy sensor requires no manual adjustment after it is installed. Adjustment is carried out automatically in the course of a period of four weeks. After this it will be sensitive in periods of activity and less sensitive when there are no people present. Different power supplies are available: 78-980 230 V/24 V DC 1 A 36-982 230 V/24 V DC 40 mA

Max installation height is 3 meters. If there are partitions in the area the ultrasound detection area may be reduced down to 25 %.

Connection

Red +

Grey (movement-controlled + light)

Blue (movement-controlled)

Black -

Black/white

Yellow/white

Blue/white

}

Movement-controlled relay e.g.ventilation/ monitoring etc.

Order numbers 43-992

Product

Type

EAN no.

Sensor 200 m²

43-222 5703102 005786

Power pack Power Supply Sensor base

36-982 5703102 203496 78-980 5703102 201775 43-992 5703102 006189 R3

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Movement sensor PIR 360° BMS for use in intelligent systems

41-340

127

Connection 41-340 lx

PIR

24V DC 1

0-10V 5

Technical data

6 BMS / IBI

+ 24V DC --

Input Supply voltage 24 V DC ± 10 % Power consumption act/pas. 0.75/0.25 W

Detection Plan view, diameter indicated at floor level.

A B

Output Output relay ΙL

The sensor PIR 360° BMS is especially suitable for use in intelligent installations like EIB, LON and CTS systems.

Performance Detection angle 360° Detection range - Small movements 9 m² Detction range - Body movements 140 m² Time delay 1-30 min. Lux range 30-3.000 lux Protection class IP 20 Cover colour RAL 9010 (white) Cable max. dimension 2xØ12 mm Mounting height 2.5 - 3 m Ambient temperature -5° C…+50° C Sensitivity Option Test mode Option LED indicator on/off (PIR) Option

With a separate output for light signal 0-10 V and relay for movement signal 1-30 min. you can program the settings of the system yourself.

0.5 A, 24 V DC NO potential free Output for light signal 0-10 V (Source) Rj>2 KΩ

Ri > 2K

ø3 m ø5 m ø12 m

0.05 A 100 m 200 m 300 m 400 m 600 m

Cable length: 0.25 mm² 0.5 mm² 0.75 mm² 1.0 mm² 1.5 mm²

ø20 m

A + B = small movements C + D = body movements

0.5 A 50 m 100 m 150 m 200 m 300 m

You can connect the output relay (PIR) in parallel. Use only the light signal (LUX) from one sensor. Mask To avoid undesired lighting in particular areas, the sensor must be constrained with the enclosed mask.

0,8m

Area indicated at table height.

• 24 V DC • Potential free output relay for movement • Time delay 1-30 min. • Lux-output 0-10 V • Lux range 30-3000 lux • 360° detection angle • 140 m² detection range • 9 m² detection range for “small movements”

Planning To ensure optimal detection at the entrance to the room, reduce the range as shown in Fig. 3 when positioning the sensors. Effective detection of a person is achieved at minimum 0.8 m height above floor level.

ø2m 3m² ø3,4m 9m² ø8m 50m² ø13,5m 140m²

Parallel connection 41-340

41-340 lx

PIR

24V DC 1�

2�

+�

3�

4�

0-10V 5�

PIR

24V DC 6

1�

2�

+�

3�

4�

0-10V 5�

6 BMS / IBI

+ 24V DC --

Order numbers Product

Sensor PIR BMS, 24 V DC

Ri > 2K

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Type

EAN no.

41-340 5703102 201201 R4

Product data Dimension (mm)

Movement sensor PIR 360° (24 V AC/DC) with built-in relay

41-549

Ø80

30,6

• 360° detection angle • Built-in time delay up to 60 min. • Small design - only Ø80 mm • Automatic switch-on and off of lighting • 4 sensivity settings

Detection Plan view, diameter indicated at floor height (mounted at height 2,5 m)

Technical data Input Power supply Power consumption Worst case Standby Worst case Standby

24 V AC/DC ±10 % <15 mA (24 V DC) <4 mA (24 V DC) <20,5 mA (24 V AC) <8,5 mA (24 V AC)

Output Contact (Reed relay)

ø4m (12m2) ø7m (38m2)

max. 48 V / 0,2 A (NO) potential-free

Sensor PIR 360°, 41-549 is designed for mounting on ceilings for e.g. movement control of HVAC and CTS systems or for use together with Servodan controls. The PIR Sensor is a universal movement sensor for 24 V AC or DC. The integrated timer can be adjusted using the DIP switch to set the time delay for the potential-free contact (reed relay).

ø4m (12m2) ø7m (38m2)

0,8m

Diameter indicated at table height.

Performance Time delay 5 sec., 30 sec. - 60 min. Detection range 360°, dia. ø7-12 m Installation height 2.5 - 4 m Sensitivity 4 settings Protection class IP 20 Ambient temperature -5° C…+50° C Approval CE according to

ø3m

ø3m ø5m

EN 60669-2-1

ø5m

Connection:

Connection - 2 or more parallel-connected PIR sensors

41-549 PIR

24V AC/DC 1

24V AC/DC

41-549 PIR

24V AC/DC

HVAC / CTS System

24V AC/DC 3

24V AC/DC

Order numbers Product

Sensor PIR 360°

Type

EAN no.

41-549 5703102 204547 R0

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Movement sensor PIR for control of HVAC and CTS systems

41-279

109

• 24 V AC/DC • Sensitivity setting • Potential free relay for direct connection to HVAC systems • Built-in walk-test function • 90° detection angle • Detection range up to 15 meter

Connection

Movement sensor 41-279 PIR

Technical data Input Supply voltage 24 V AC/DC ±10%) Power cons. - worst case <18 mA (24 V DC) Power cons. - standby <4 mA (24 V DC)

24V ac/dc 1

Movement sensor 41-279

PIR

24V ac/dc 1

Output Kontakt (reed relæ)

Performance Time (2 sec.) 30 sec.-30 min. Detection angle 90° Detection range 0,5...15 m Protection class IP 20 With IP54 Cover IP 54 Cable entry 2 x Ø 5 mm Ambient temperatur -20°C...+50°C

24V ac/dc 3

Max. 48V/0,2A (NO Potential free relay

24V ac/dc

CE approval acc. to

EN 60669-2-1

Sensor PIR 41-279 is a passive infrared movement sensor which responds to temperature changes and movements by people. The Sensor PIR 41-279 is used for ventilation control in halls, exhibiotion areas, offices and con-ference rooms. Can be connected directly to HVAC systems for control of ventilation. The sensor can also be connected to BMS systems i.e. Comlux. The Sensor PIR is supplied with brackets for ceiling and wall installation. After connection to the power supply, the Sensor PIR is ready for operation after 1-2 min. (power-up time). For outdoor installation the cover 41-902 must be used.

Detection range

41-279

Sensitivity setting Time

Walking direction

Test

30m

30s

10m

Test

30m

30s

10m

Minmum: Test

Maximum: 30 min.

Scale

Order numbers Product

Sensor IP54 Cover

Type

EAN no.

41-279 5703102 204318 41-902 5703102 203458 R1

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Movement sensor for automatic control of indoor lighting

41-201 80

80 50

• •

• • • •

Technical data

Connection

Input Supply voltage Power consumption

Push button

L N

41-201

230 V AC ± 10 % 1W

Output Relay contact NO, µ10 A, 250 V AC Max load: Incandescent lamps 2.000 W Fluorescent tubes, not comp. 1.200 VA Halogen incandescent lamps 500 W Compensation capacity 140 µF Max. starting Peak 80 A/20 mS

L N

41-201

L N

N N

41-201

L N

41-201 P

Master

200° 8-9 m 20 sek./1 min./ 5 min./15 min./30 min. Lux range 5...1.000 lux Protection class IP 40 Installation height 0,8..2 m Ambient temperature -5° C...+45° C

41-201 P

Push button

41-201

Performance Detection angle Detection range Time delay

Push button L

Slave

L N

Connection using the master/slave principle.

N N N N

Master L N

41-201

41-201 PP

Slave

Master

L N

Slave

Master

L N

N N

Master 41-201

EN 60669-2-1

Settings

Push button

Master 41-201

Push button

Approvals CE according to

Connection using the master/master principle. Lux, Meters and Time can be set separately for each sensor 41-201 41-201

Master

100

20s.

1m. 5m. 15m.

5 1.8 - 2.0m

0.8 - 1.5m

2.5m

Test

Slave

Lux

2.5m

Meter

0 0.8m 1.5m

Installation height from 0.8 m to 1.5 m

Constant On or Off is easy to select by pushing the upper part of the sensor to the left or to the right. Automatic is selected by setting the upper part in neutral positon. Detection The sensor is designed to be fitted to a wall at a height of 0.8 m to 2.0 m. The coverage area is up to 9 m at an installation height of up to 1.5 m, and up to 8 m at an installation height from 1.5 m to 2.0 m.

Installation height from 1.5 - to 2 m 8m

0.8 - 1.5m

0.5m 3m

200°

4 1.5 0 1.5 4

1.8 - 2.0m

2.5m

0 0.5m 1m

The movement sensor has 5 fixed settings for time: 20 sec. - 1 min. 5 min. - 15 min. and 30 min. The movement sensor has 4 fixed settings for lux: 5/30/100 lux / independent of lux. You can also save the topical lux level, when there is the desired minimum lighting in the room.

200

200°

3 101 3

Settings To change the sensor’s settings, open the front cover. Here you can set the off delay (the time when the light must be switched on after last movement), lux level and sensitivity.

You are advised not to place the sensor where it is exposed to direct sunlight, airflows from air conditioning/ radiators, etc.

Time

Detection range

The movement sensor is switching on the lighting when it detects moving of persons and the lux level is lower than the preset level.

30m.

0.5m 0 0.5m 1m

Connection for 230 V AC For flush and plate mounting Detection 200°/8-9 m Master/slave function Test function Hidden settings

2.5m 1m 0 0.8m 1.5m

Order numbers Product

Minilux sensor Junction box

Type

EAN no.

41-201 5703102 203366 41-901 5703102 203441 R2

200

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimension (mm)

Movement sensor PIR 360° (230 V AC) for flush mounting

41-400 Ø90

32 24

• Small design and elegant finish - only Ø90 mm • With or without automatic lux-function • Manual switch-on and off automatic switch off • 360° detection angle • 4 different settings of functions via DIP-switch

60mm for Euro-box

55mm for PL-box

Technical data Input Supply voltage Power consumption

230 V AC ±10 % 50 Hz 1W

Output Switch Max load: Incandescent lamps Fluorescent lamps Halogen incandescent lamps Max. compensation capacity Max. inrush current

Detection Plan view, diameter indicated at floor height (mounted at height 2,5 m)

Performance Lux range Time delay Detection range Installation height Sensitivity Protection class Ambient temperature

NO, µ 10 A 2300 W 1200 VA 2300 W 140 µF 80 A / 20 ms

30…2000 Lux 5 sec., 2...30 min 360°, dia. ø7-12 m 2.5 - 4 m 4 settings IP 20 -5° C…+50° C

Approval CE according to

EN 60669-2-1

ø7m (38m2)

The built-in light sensor blocks off lighting in the daylight hours if there is sufficient daylight. The lux level is set in the sensor. The movement sensor can be used with its factory settings, or the settings can be modified using the remote control – IR Remote 41-920 (accessory). DIP-switch settings (functions): App. 1) Daylight dependent Aut. On/off via PIR Manual on/off via push button App. 2) Daylight dependent Manual on/off via push button Aut. Off via PIR App. 3) Movement controlled only Aut. On/off via PIR Manual on/off via push button

Accessory IR Remote 41-920

ø4m (12m2)

Movement sensor PIR 41-400 is a passive infrared sensor which react to temperature changes and movements by people.

ø4m (12m2) ø7m (38m2)

App. 4) Movement controlled only Manual on/off via push button Aut. Off via PIR

0,8m

Diameter indicated at table height.

Connection

41-400

ø3m

ø5m

N Planning To ensure optimal detection at the entrance to the room, reduce the distance between door and sensor, when positioning the sensors. Effective detection of a person is achieved at minimum 0.8 m height above floor level.

N 230V L

L’

Order numbers Product

Type

EAN no.

Sensor PIR 230 V AC 41-400 5703102 203601 IR remote 41-920 5703102 204028 R0

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Movement sensor PIR 360° (230 V AC) for indoor light and ventilation control.

41-300/41-320

59 mm

127 mm

Connection diagram 41-300 (standard) PIR

Technical Data

L N

41-320 (light and ventilation) PIR

L1 L2 N

Detection Skala�:� Dato� :� Tegnet:�

3:1 19-09-02 KOE

Plan view, diameter indicated at floor level.

A B

4100328

Input Supply voltage 230 V AC ±10 % 50 Hz Power consumption 41-300 act./pas. max. 1 W Power consumption 41-320 act./pas. max. 1.5 W Output Relay contact NO, µ10 A, 250 V AC Max load: Incandescent lamps 2.300 W Fluorecent lamps 1.200 VA Compensation capacity 140 µF Energisave lamps 18 W / 58 pcs. Low-voltage - Inductive (ring core) 500 VA Low-voltage - Electronic ballast 1.200 VA Tungsten-halogen lamps 230V 2.300 W Max. starting peak 80A/20 ms Performance Detection angle 360° Detection range - Small movements 9 m² Detction range - Body movements 140 m² Time delay 1...30 min. Lux range 10-1,000 lux Hysteresis +10 % Protection class IP 20 Cover colour RAL 9010 (White) Cable max. dimension 2 x Ø 12 mm Ceiling installation height Max 2,5 - 3 m Ambient temperature -5° C...+50° C

ø3 m ø5 m ø12 m ø20 m

A + B = small movements C + D = body movements

Approval CE according to

• Type 41-300 light control (1 channel) • Type 41-320 light and ventilation control (2 channels) • 360° detection angle • Large range - 140 m² • Registers small movements in a range of 9 m² • Extra energysave feature. The light can be switched off manually upon leaving. Sensor PIR 360° is available in 2 versions: 41-300 Movement and daylight control (1 channel) 41-320 As for 41-300, with additional potential free output relay for ventilation control (2 channels) If the light has been forgotten when leaving the room, then it will automatically switch off, after the preset time has elapsed. Sensitivity can be adjusted postinstallation, if necessary. To avoid undesired lighting in particular areas, the sensor lens can be delimited with the enclosed mask. Manual operation of push button switch • Press briefly (0.5-2 sec) to switch off the light upon leaving the room. •

Constant light on upon prolonged press > 2 sec. (returns to auto again when pressed briefly)

•

Constant light off upon prolonged press > 2 sec. (returns to auto again when pressed briefly)

EN 60669-2-1

0,8m

Area indicated at table height.

Type 41-320 (Light/Vent.)

ø2m

Extra potential free relay output (ventilation) is daylight independent. Time delay = Timer setting + 25 % Remaining data as for relay (Light)

3m² ø3,4m 9m² ø8m 50m² ø13,5m 140m²

Parallel connection

Mounting of two sensors on the same switch will because of lux-function, affect the control system and is not recommended. Without lux-function - parallel connection is possible.

Order numbers Product

Sensor PIR Standard Light/vent

Type

EAN no.

41-300 5703102 201065 41-320 5703102 201072 R7

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimension

Movement sensor PIR 360° (230 V AC) for indoor light control - Master/ slave model

41-302

127

• Master/slave model - Create a system easily • Automatic switch-on and off of lighting • 360° detection angle • Large range - 140 m² • Registers small movements in a range of 9 m²

Detection Plan view, diameter indicated at floor level.

A B

Technical data

Input Supply voltage Power consumption

230 V AC ±10 % 50 Hz approx. 1 W

Output Relay contact Max load: Incandescent lamps Fluorescent lamps Compensation capacity Max. starting peak

ø3 m ø5 m ø12 m ø20 m

A + B = small movements C + D = body movements

0,8m

Area indicated at table height.

ø2m 3m² ø3,4m 9m² ø8m 50m² ø13,5m 140m²

Planning To ensure optimal detection at the entrance to the room, reduce the range when positioning the sensors. Effective detection of a person is achieved at minimum 0.8 m height above floor level.

NO, µ 10 A 2.300 W 1.200 VA 140 µF 80 A / 20 ms

Performance Detection angle 360° Detection range - Small movements 9 m² Detction range - Body movements 140 m² Lux range 10…1000 Lux Hysteresis +10 % Time delay 1...30 min Sensitivity Selected manually Activation indicator on/off Selected manually Test modes Selected manually Protection class IP 20 Cable max. dimension 2 x ø12 mm Ceiling installation height 2,5 - 3 m Ambient temperature -5° C…+50° C Approval CE according to

EN 60669-2-1

Please note! All slave units MUST have the same PHASE as the master unit.

Conection 41-302 - Master

41-302 - Slave PIR

L N SL

Push (230 V)

The integrated light sensor measures the light level in the area continuously. The light is switched on if the light level falls below the preset value and the movement sensor detects activity in the coverage area. The sensors can be connected in a master/slave system, so you are able to cover a larger area. On the master unit Lux and Time are set, on the slave unit Time only. The way you install and set the unit, determines if the unit is functioning as master or slave. Calculating the total off delay: Master unit eg. set to 15 min. Slave unit eg. set to 10 min. Total off delay is 25 min. The shortest possible off delay is 2 minutes (master 1 min. + slave 1 min.). If only the master unit is used, the shortest possible off delay is 1 minute. To avoid undesired lighting in particular areas, the lense must be constrained with the enclosed mask. Pushbutton operation Option to use a pushbutton to switch on the light, provided the light level is lower than the preset value.

PIR

Order numbers Product

PIR master/slave

Type

EAN no.

41-302 5703102 203922 R1

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Movement sensor PIR 360° 2-CH (230 V AC) for indoor light control in classrooms

41-330

127

• Type 41-330 Sensor PIR 2-CH for control of 2 series of ceiling lights + board lighting. • Manual switch-on and automatic switch-off of lighting • 360° detection angle • Large range - 140 m² • Registers small movements in a range of 9 m²

Connection diagram

41-330 (2-CH)

Technical Data

PIR

Input Supply voltage 230 V AC ±10 % 50 Hz Power consumption active/passive max. 1.5 W

L1 L2

Output Relay contact NO, µ10 A, 250 V AC Max load: Incandescent lamps 2.300 W Fluorecent lamps 1.200 VA Compensation capacity 140 µF Energisave lamps 18 W / 58 pcs. Low-voltage - Inductive (ring core) 500 VA Low-voltage - Electronic ballast 1.200 VA Tungsten-halogen lamps 230V 2.300 W Max. starting peak 80 A/20 ms

Detection Plan view, diameter indicated at floor level.

A B

Performance Detection angle 360° Detection range - Small movements 9 m² Detction range - Body movements 140 m² Time delay 1...30 min. Lux range 10-1,000 lux Hysteresis +10 % Protection class IP 20 Cover colour RAL 9010 (White) Cable max. dimension 2 x Ø 12 mm Ceiling installation height Max 2,5 - 3 m Ambient temperature -5° C...+50° C

ø3 m ø5 m ø12 m ø20 m

Approval CE according to

A + B = small movements C + D = body movements

EN 60669-2-1

Sensor PIR 2-CH is used in classrooms and is equipped with 2 separate outputs (channels). Channel 1: is daylight and movement controlled, and is applicable to ceiling lights in the series closest to the windows. Channel 2: is movement controlled only, and it can be applied to ceiling lights remote from the windows, and board lighting. (Potential free relay) Operation Lights must always be turned on manually at the push button switch and can be turned off again manually when leaving. If the light has been forgotten upon leaving the room, then it will automatically switch off after the pre-set time has elapsed. Channel 1 is daylight controlled and will switch on and off dependent upon the level of daylight, provided there is human movement in the premises. Channel 2 will always switch on and off upon manual operation of the switch. Constant light off, such as for showing a film, is achieved by manual operation of the push button switch. Sensitivity Sensitivity can be adjusted post-installation, if necessary. Mask To avoid undesired lighting in particular areas, the sensor lens can be constrained with the enclosed mask.

0,8m

Area indicated at table height.

Parallel connection

ø2m

Mounting of two sensors on the same switch will because of lux-function affect the control system and is not recommended.

3 m² ø3,4m 9 m² ø8m 50 m²m ø13,5 140 m²

Order numbers Product

Sensor PIR 2-CH (classroom)

Type

EAN no.

41-330 5703102 201195 R7

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data 43-997

Technical data

Protection cap type 43-997 Dimensions

Colour

Height 171 mm Width 146 mm Depth 108 mm White

The protection cap is used to protect the sensors in e.g. sports centres, gymnasiums, walking areas. Use it as protection against both ball games and vandalism. Fits: • • • • •

41-262 41-271 41-272 41-274 41-231

Order number: Product

Protection cap

43-998

Technical data

Protection cap type 43-998 Dimensions Colour

Height 171 mm Width 146 mm White

Type

EAN no.

43-997 5703102 201843

The protection cap is used to protect the sensors in e.g. sports centres, gymnasiums, walking areas. Use it as protection against both ball games and vandalism. Fits: • • • • • • • • • •

41-300 41-301 41-320 41-330 41-340 43-205 43-208 43-215 43-222 43-225

Order number: Product

Protection cap

Type

EAN no.

43-998 5703102 201850 R2

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Electronic starter for fluorescent lamps

16-901/903

• • •

• Principle diagram for series-connected lamps.

16-903

Technical data Type 16-901: Power range Connection time

16-125 W 1.7 sec using 36 W lamp

Type 16-903: Power range Connection time

• •

4-22 W 1.7 sec using 18 W lamp

• •

General information: Supply voltage 200-260 V Frequency 50/60 Hz Ballast type Inductive or capacitive Disconnection of defective lamps max. 5 seconds Switch-on voltage 1.5 kV Multi pulsing Temperature, Ta -20°C...+80° C Min. start temperature -20° C Casing Polycarbonate Weight 10 gr.

Also for series-connected lamps Non-flash start of fluorescent lamps Reduction of maintenance costs (reduced frequency of defective lamp replacements) Electronic starter disconnects defective lamps, thus preventing irritating flashing and unnecessary power consumption 20-30 % longer life of lamps Life of electronic starter > 50,000 hours Low temperature range -20° C Approved according to IEC 926 and EN 60926

Servodan’s electronic starter has a great number of advantages compared with traditional starter switches. The electronic starter ensures that many switch ON and OFF do not reduce the life of the lamp. Servodan’s electronic starter can be used in a wide temperature range, and the built-in solid-state relay ensures optimum switching on of fluorescent lamps. Controlled heating of the cathode followed by a series of high-voltage start pulses ensure precise switching on of fluorescent lamps - without flashing. The electronic starter switches off any defective lamps. Thus the irritating flashing occurring in traditional starter switches is avoided. Electronic starter type 16-903 Used for 18 or 20 W 600 mm fluorescent series-connected lamps and for lamps in single and double-tube fittings in 4-22 W range.

Order numbers Product

Electronic starter Electronic starter

Type

EAN no.

16-901 5703102 002587 16-903 5703102 003263 R3

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Light sensor 0-10 V for indoor mounting

43-197

52.0

•

29.5

• • •

Technical data

Selection of lux range

30 - 3000 lx 300 - 30K lx 600 - 60K lx 3 - 300 lx Default setting: 30...3000 lux +

Connection Lux

24 V DC ± 10 %

Output Output voltage

0-10 V

Performance Lux ranges:

3...300 lux, 30...3K lux 300...30K lux, 600...60K lux Protection class IP 20 Connection Screw terminals Max. distance to Control 100 m Cable - Class II control 0,6 mm Ambient temperature -40° C...+50° C

Light sensor 43-197

0-10V

Input Supply voltage

Placement

3 4

Lux Lux range on

Off delay Test

App In

Out

Lux

Set + Light sensor 43-197

Mode Test

0-10V

LA N

Fig. 1

D 8

A 1

10 11 12

Fig. 2

Luxstat Control DIM

78-050

Servodan A/S 20000 Lx

External control system Lux

RJ12-1 6 polet

0-10V

RJ12-2 6 polet

Light sensor 43-197

SENSOR

0-10 V

Order numbers

Ri  2 K ohm

24 V DC 1

Placement: Fig. 1: When daylight enters the room from the side, the light sensor must be placed so that it “sees” the incoming daylight.

1 2 Luxstat Control 78-0X0

If the location requires a higher protection class than IP20, use type 43-198 which has a IP54 protection class.

Set -

The light sensor 43-197 has screw terminal connection, so there is no need for extra junction box.

Fig. 3: The light sensor should be placed so that it “looks” directly up at the sky. To avoid direct sunlight, place the light sensor as shoown.

Minilux Control

36-080

The Sensor 43-197 is a light sensor which covers a number of lux ranges and is intended to control indoor lighting.

Fig. 2: The light sensor must be placed behind any curtains or sunblinds fitted behind the window.

Control 36-080

For connection to: - Control 36-080 - Luxstat Control 78-0XX Screw terminals Protection class IP 20 4 lux ranges: - 3...300 lux - 30...3.000 lux - 300...30.000 lux - 600...60.000 lux

PLC PPC BMS CTS

D 5

Product Fig. 3

Light sensor

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Type

EAN no.

43-197 5703102 203311 R2

Product data Dimension

• Powered through solar cells • For outdoor usage • EnOcean STM110 transmit-

35 38

ter

• 2 lux ranges:

Wireless, selfpowered light sensor with EnOcean transmitter

43-161

•

Technical data

Jumper setting

Supply voltage

J4 LRN

J2 Lux

Factory setting 300 - 30.000lx 600 - 60.000lx

J3 Course

J4 Wake-up

Factory setting 10

Factory setting 100

100

Two split solar cells + internal backup capacity RF transmitter system: 43-161 Profile 2008 STM110 v.1.04 Transmission frequency 868 MHz Transmission output <10 mW Transmission rate at default setting: Less than 4 steps: every 17 min More than 4-5 steps: Less than 10 s RF distance Approx. 300 m (open field) (Range, see below) Approx. 30 m (indoor) Lux range 1 300...30.000 lux 117 lux / step STM110 PIN5 A/D0 (4LSB) Lux range 2 600...60.000 lux 234 lux / step STM110 PIN6 A/D1 (5LSB) Protection class IP54 Ambient temperature -20° C...+55° C Approvals CE according to EnOcean approval

Placement

EN 60669-2-1 See www.servodan.com

- 300...30.000 lux - 600...60.000 lux Unique address code via “learn mode” IP54

The wireless light sensor model 43-161 is a light sensor based on wireless technology. The light sensor transmits an RF telegram to a receiver module. The light sensor measures the light level continuously and compares it with the RF telegram transmitted earlier. In the event of a change in the light level of more than 4 steps (1 step = 117 lx in the default lux range, otherwise 234 lx), a relevant RF telegram will be transmitted within 10 seconds. In normal operation a current RF telegram will be transmitted approx. every 17 minutes. The light sensor is designed to be installed outdoors on a typical façade wall. We recommend installation higher than 2.5 meters in order to reduce inconvenient lighting, distracting shadows, vandalism, etc. As the power supply is generated by the internal solar cell, the light sensor must see a minimum of 400 lux for more than 5 hours, in order to have sufficient energy to transmit the necessary RF telegrams (for example throughout the night).

Distance

Light sensor

30 m “hidden” receiver

Receiver Visual contact

Radio shadow (dead spot)

Light sensor

20 cm wall Low attenuation

Receiver

100 m

Metal

30 m

100 m

60 cm wall high attenuation Receiver

Order number Product

Type

EAN no.

Light sensor wireless 43-161 5703102 205025 R4

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Movement sensor PIR 360° Wireless 230 V AC and 24 V AC/DC for indoor lighting control

41-301

127

• •

Connection

PIR 230V ac L

Technical data

Input Supply voltage 230 V AC ±10 % 50 Hz Alternative voltage 24 V AC / DC ±10 % Power consumption 230 V AC/ 24 V 1 W/0,5 VA

230 V PIR

Output RF system transmitter

24Vac / DC 1

6 + --

24 V

Detection Plan view, diameter indicated at floor level.

A B

ø3 m ø5 m ø12 m ø20 m

A + B = small movements C + D = body movements

0,8m

Area indicated at table height.

Performance Lux range 10…1000 Lux Lux range off LUX is turned towards max to position off, no daylight blocking. Hysteresis > +10 % Time delay 1...30 minutes, with daylight blocking 10 sec.…30 minutes, no daylight blocking Transmitter frequency 868 MHz Transmitter output < 10 mW Transmitter rate of recurrence On standby once per approx. 100 sec. Immediately when PIR activation timer set RF – range 100 meters in open space/free line of vision, approx. 30 meters in buildings Sensitivity Option Activation indicator on/off Option Test modes Option Protection class IP 20 Cable bush 2 x Ø12 mm Ambient temperature -5° C…+50° C Approvals CE accoding to

LED1 LED2

Function The integrated light sensor measures the light level in the area continuously, and compares it with the preset value specified via the LUX setting button. If the light level falls below the preset value and the movement sensor detects activity in the coverage area, the light is switched on. The integrated cut-out delay of 1-30 minutes (adjustable) makes sure that the RF switch-on telegrams are sent continuously (approx. once a minute) to the receiver, until the sensor does not register activity or the selected ligth level is reached. If you press the LRN button, an RF status telegram will immediately be sent to the receiver. A simple and easy connection. See available receivers on www.enocean.de

LED1 = Light + movement LED2 = Movement LED3 = RF - Transmit

3m² ø3,4m 9m² ø8m 50m² ø13,5m 140m²

The model 41-301 PIR Sensor is a movement sensor based on wireless technology that sends an RF telegram to a receiver module, which switches the light on and off.

EN 60669-2-1

Settings

ø2m

EnOcean STM100

• • • •

Wireless technology (EnOcean RF transmitter) Light sensor: 1. Priority: Daylight 2. Priority: Movement Automatically on/off 360° detection angle 140 m² detection range 9 m² detection range for “small movements”

LRN LED3

LUX

TIME

12 34

Order numbers

Factory settings 15min

Min

LUX

Off

Product

Max 1min

TIME

30min

Sensor PIR Wireless

Type

EAN no.

41-301 5703102 201768 R2

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Movement sensor PIR 360° Wireless 230 V AC and 24 V AC/DC for indoor lighting control

41-380

127

• •

Connection

PIR 230V ac L

Technical data

Input Supply voltage 230 V AC ±10 % 50 Hz Alternative voltage 24 V AC / DC ±10 % Power consumption 230 V AC/ 24 V 1 W/0,5 VA

PIR 24Vac / DC 1

6 + --

Detection Plan view, diameter indicated at floor level.

A B

ø3 m ø5 m ø12 m ø20 m

A + B = small movements C + D = body movements

0,8m

Area indicated at table height.

Output RF system transmitter: Profile 2008 STM110 v.1.04 Performance Lux range 10…1000 Lux Lux range off LUX is turned towards max to position off, no daylight blocking. Hysteresis > +10 % Time delay 1...30 minutes, with daylight blocking 10 sec.…30 minutes, no daylight blocking Transmitter frequency 868MHz Transmitter output < 10 mW Transmitter rate of recurrence On standby once per approx. 100 sec. Immediately when PIR activation timer set RF range 100 meters in open field/free line of vision, approx. 30 meters in buildings Sensitivity Option Activation indicator on/off Option Test modes Option Protection class IP 20 Cable bush 2 x Ø12 mm Ambient temperature -5° C…+50° C Approvals CE accoding to

LED1 LED2

LED1 = Light + movement LED2 = Movement LED3 = RF - Transmit

3m² ø3,4m 9m² ø8m 50m² ø13,5m 140m²

The model 41-380 PIR Sensor is a movement sensor based on wireless technology that sends an RF telegram to a receiver module, which switches the light on and off.

EN 60669-2-1

Settings

ø2m

• • • •

LRN LED3

LUX

TIME

12 34

Order numbers

Factory settings 15min

Min

LUX

Off

Product

Max 1min

TIME

30min

Sensor PIR Wireless

Type

EAN no.

41-380 5703102 204998 R0

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Wireless and batteryless movement sensor type 41-580 for indoor lighting control

41-580

Dimensions

• •

120

• • Technical data

Detection range Plan view, diameter indicated at floor height (mounted at height 2,5 m)

Input Power supply Solar cell, zero-energy. Lux-level for function more than 80 lx measured by luxmeter. Guidance: 25W bulb, distance approx. 50 cm Power consumption <10 µW Protection IP20 Temperature range +5° C ... +50° C indoor use Performance Installation height 2,5 - 4m Detection range 360°, ø7 – ø12 m Type of signal/range RF signal EnOcean RF signal range

ø4m (12m2) ø7m (38m2) ø4m (12m2) ø7m (38m2)

0,8m0,8m

Diameter indicated at table height.

ø3m

868 MHz, <10 mW 100 m in free range/ 30 m in buildings, see RF wireless information EnOcean transmitter Profil 2008 STM110 v.1.04 Approvals CE iht. R&TTE 1999/5/EC ETSI EN 301 489-1: 2005-09 ETSI EN 301 489-3: 2002-08 (SRD class2) ETSI EN 300 220-3: 2000-09

Zero-energy sensor supplied by a solar cell Detection range 7 meters/ 360° For ceiling mounting Setting of lux and time by the wireless receiver or a Comlux system

The PIR sensor is a product in the Servodan wireless concept. Lighting is turned on manually by the wireless switch (76-922) and the PIR sensor ensures that lighting remains switched on as long as moving people are detected. Via the wireless receiver (e.g. 70-100) the required time delay is set, which ensures that the light remains on for a period after the last person has left. Recommended installation height is 2-4 m. At 2.5 m the sensor has a range of 7 m in 360° (38 m²) . A wireless and batteryless switch (76-922) must be integrated in order to switch on the light manually. The solar-powered PIR sensor requires at least 80 lux in order to initiate and operate as required.

ø3m

ø5m

Penetration rates Materials Penetration Wood, plaster and glass without surface foil 90-100 % Brick, MDF and chipboard panels 65-95 % Concrete reinforcement 10-80 % Metal, aluminium panels, etc. 0-10 %

Principle – Manual switch on/off by push-button, automatic switch off by PIR sensor

70-100

Order number

41-580 230 V

76-922

Product

Sensor PIR Solar/EnOcean Wireless receiver Wireless/batteryless push-button

Type

EAN no.

41-580 5703102 203991 70-100 5703102 204851 76-922 5703102 201737 R2

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimension

Wireless Push-button 2 channel type 76-922 4 channel type 76-923

76-922/923

• • •

Transmits wireless signal to Wireless receiver module Mounted with screws or tape on the wall Without battery – entirely maintenance-free

15 mm

Technical data 82 mm

Operating frequency Transmission effect Modulation type Operating cycles Ambient temperature Relative humidity

868,3 MHZ 10 mW ASK Amplitude Shift Keying min. 50.000 -25° C...+65° C in dry rooms 0 %...95 %

The wireless push-button is a batteryless and maintenance-free wall transmitter, which by the means of the wireless receiver can control electrial equipment. When programming a wireless Pushbutton to communicate with a wireless receiver, please follow the instructions for the wireless receiver. A wireless push-button may – when in programming mode – not be more than 5 m away from a wireless receiver, because the reciever then has a limited range. The wireless system is particularly suited for renovations, future installation of electrical equipment or in offices with moveable walls.

82 mm

Mounting Must always be mounted on a flat surface, so the bottom is not twisted when installing. Uneveness can lead to functional problemsand cause the bow of the transmitter to stick. The wall transmitters can be adhered to flat, smooth surfaces such as painted walls, tiles, furniture, wood etc. using the accompanying adhesive strips.

Transmission range The main factors that influence the transmission range of the wireless system are the antenna location of the receivers and transmitters, the building structure and the number of obstacles in the connection path. Other factors are noise sources that affect the receiver and dead spots caused by signal reflection from nearby conductive objects. Since the anticipated transmission range depends on these system conditions, range tests should be performed before a specific range is determined for an application.

The following transmission ranges are to be viewed as general guidelines: • in the open air approx. 300 m • in halls approx. 200 m • in corridors approx. 50 m • plasterboard/wood (max. 7) approx. 30 m • tile and cellular concrete (max. 3) approx. 20 m • reinforced concrete walls/ceilings (max. 1) approx. 10 m Transmission range is limited by: • insulation material with metal foil • intermediate ceilings with metal or carbon fibre panels • lead glass or metal-coated glass • mounting wall transmitters on metal walls

The double sided adhesive film can be used to mount on glass walls. This adhesive film completely covers the back of the wall transmitter. It is applied first to the assembled wall transmitter and is then stuck to the glass surface.

Order numbers Product

Puh-button, 2 ch. Push-button, 4 ch.

Type

EAN no.

76-922 5703102 201737 76-923 5703102 201744 R2

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Wireless EnOcean receiver type 70-100 for indoor lighting control, 230 V AC

70-100 36

112

143

• • • Technical data

Connection

Input Supply voltage 230 V AC 50 Hz ±10 % Power consumption <3W

ø1

230V~

Output Relay

ø4

ø2 N

N ø5

ø3 L

L ø6

230V~

Load: Incandescent lamps 2300 W Fluorescent tubes, not compensated 1200 VA Halogen incandescent lamps 2300 W Max. compensation capacity 140 µF Energy-saving lamps 58 pcs. (18W) Max. starting Peak 80 A/20 m sec.

ø7 ø8 DIP 4 DIP 3 DIP 2 DIP 1

CLR

TIME

LUX

NO, µ 10 A, dry contact

LRN

Performance Receiver

ø1

230V

ø2 N

ø3 L

ø4

ø5 N

ø6 L

ø7 ø8 Lin Lout

N L

EnOcean RCM 130, standard protocol 868MHz Off delay 0 - 30 min Lux range Depending on external wireless light sensor LED indication For received learned signal Protection Class IP 20, Enclosure Class II Ambient temp. -5° C...+50° C. Approvals CE according to EnOcean approval

230 V AC receiver getting a RF-signal from Sensor PIR 360° Wireless/EnOcean and from EnOcean push-button Time delay from 0 to 30 min. Easy mounting and installation

The wireless receiver is a product in the Servodan wireless concept and can operate together with the wireless push-buttons for manual turning on and off the lighting. It can also operate together with both the wireless push-button and the wireless and battery less PIR sensor (type 41-580). In that case the lighting is turned on by the push-button and the PIR sensor will automatically turn the light off, if no activity is registered in the detection area of the sensor. Of course, the light can always be turned off by the push-button. The wireless receiver control, which is supplied with 230 V, can be connected directly to 2300 W max. load. Time delay for the PIR sensor is set optional from 0 to 30 min.

EN 60669-2-1 See www.servodan.com

Principle 41-197

41-580

70-100 230 V

41-380

Order number Product

230 V/24 V With built-in light sensor. 76-922 By using the PIR sensor, type 41-380 the light also can be turned on and off automatically.

Wireless receiver Sensor PIR Solar/EnOcean Wireless/battery less push-button Wireless sensor PIR

Type

EAN no.

70-100 5703102 204851 41-580 5703102 203991 76-922 5703102 201737 41-380 5703102 204998 R3

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimension

Dimmer 700 W

74-010

• • • • •

The Tronic built-in dimmer as trailingedge dimmer is designed for installation in recessed ceilings.

Technical data 74-010

Incandescent lamps, low voltage transformers, amplifier units max 700 W

Push button

Input Power supply Power consumption

230 V AC approx. 1 W

Output Load 50-700 W - Elec. transformer + low volt halogen lamps - Incandescent lamps 230 V - Tungsten-halogen lamps 230 V - Mixed load of the above Performance Ambient temperature

For low voltage halogen lamps via electronic transformer For recessed ceilings For incandescent lamps and tungsten-halogen lamps 230 V Push button operated Load up to 700 W

max. 45° C

Connection

It is controlled by common flushmounted push buttons with the following operation principle: Short touch = On/off switching of the lighting system Long touch = Continuous dimming Short-circuit and overload protection The light dimmer is supplied with an electronic fuse. The switch-off time in connection with a short circuit is approximately 7 seconds. Overload protection Automatical switch-off at overload or to high temperatures.

N L Dimmer 74-010

Amplifier unit 74-290 Max. 700 W

Load 74-010 - Max. 700 W

74-290 - Max. 10 pcs.

System

74-010 74-290

74-290

Order number Product

Type

EAN no.

Tronic dimmer

74-010 5703102 002532

Amplifier unit

74-290 5703102 002549

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions

Power up dimmer for installation and surface mounting

74-290

• For dimming with trailing • •

The power up dimmer 74-290 is used to dim large loads and is designed for concealed installation in the ceiling (take ventilation into consideration) or surface mounting.

Technical data

Connection

Input Supply voltage Power consumption Dimmer

Tronic Trafo

74-290

Tronic Trafo

*) Direct dimmer load

230 V AC approx. 1 W

Output Load 100-700 W - elec. trans. + low-voltage halogen lamps - incandescent lamps - incandescent halogen lamps 230 V AC - combination load of above Performance Ambient temperature Casing temperature

edge dimmers For 230 V AC Load up to 700 W

max. 45° C max. 70° C

If you combine several power up dimmers you can control loads of up to 2.300 W via one single dimmer. The power up dimmer may not be used together with leading edge dimmers. The power up dimmer is fitted with electronic protection. In the event of a short circuit of < approx. 7 sec., automatic reconnection will take place. In the event of a short circuit of > approx. 7 sec., the unit will cut out. Overload protection provides temperaturedependent downward adjustment at 20 % overload or overheating.

Connection

Electronic dimmer RC

* Marked Tronic Trafoer must at least be 105 W

Tronic trafos

halogen lamps

Tronic trafos

halogen lamps

74-290

Output

Order number Product

Power up dimmer

Type

EAN no.

74-290 5703102 002549 R0

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimensions:

Push button controlled dimmer 1-10 V

74-040

• • •

For adjustable ballasts 1-10 V Setting for minimum light Memory for last level

Flat built-in unit for switching and controlling of electronic ballasts with 1-10 V interface. The minimum level of the light intensity can be adjusted on the dimmer.

Technical data

Connection Min. light level

Memory on/off

1 - Phase control

Power supply Switch

230 V AC/50 Hz Relay

Load: - Resistive and inductive load 2,300 W - HF Depend on type Max. load Max. 200 mA Galvanic insulation 1-10 V 2 kV-basisinsulation Ambient temperature Max. 50° C No-load protection Yes Protection class IP20

It is controlled by common flushmounted push buttons with the following operation principle: Short touch = On/off switching of the lighting system Long touch = Continuous dimming Setting the memory button to on, the dimmer will always switch on the lighting at the last level. The type of HF ballast is decisive for how many you can connect to one dimmer. Typical sources a HF ballast 0,5 to 2 mA.

3 - Phase control

Order number Product

Dimmer 1-10 V

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Type

EAN no.

74-040 5703102 006561

Notes

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Low voltage

Product data Dimension

Electronic converters for low-voltage halogen lamps

74-210...214

• • • • • Technical data L

74-210 74-212 74-213

191

175

74-214

220

203

38,5

Connection

Type 74-210 Type 74-212 Type 74-213 N

230V

60 W 105 W 150 W

Type 74-214 230V

12V

Secondary

Primary

200 W

50 Hz 12V tc

L N

Primary

Connection

230 V ac 11.5 V eff 25.000 hours

Primary wire H03W-F Secondary wire H03W-F

2 x 1.5 mm² 2 x 0.75 mm² as minimum

Type 74-210: 60 VA Current Output Ambient temperature, ta Casing temperature, tc

0.27 A at 60 W 20-60 W max. 50° C max. 70° C

Type 74-212: 105 VA Current Output Ambient temperature, ta Casing temperature, tc

0.47 A at 105 W 10-105 W max. 50° C max. 70° C

Type 74-213: 150 VA Current Output Ambient temperature, ta Casing temperature, tc

0.69 A at 150 W 35-150 W max. 45° C max. 80° C

Type 74-214: 200 VA Current Output Ambient temperature, ta Casing temperature, tc

0.8 A at 200 W 50-200 W max. 45° C max. 80° C

50 Hz tc

L N

Supply voltage Secondary voltage Lifetime

Secondary

Soft start No-load protection Short-circuit and overload protection Over-temperature protection Adjustable with trailing-edge dimmer (R-C)

Electronic converters are used for low-voltage halogen lamps and are adjustable with trailing-edge dimmers. Electronic converters are particularly suitable for being built into furnishings and in combination with low-voltage systems. Electronic converters have a softstart system protecting the lamps; thus lifetime is extended. The converters have overload protection, shortcircuit protection and overtemperature protection. Likewise, they have automatic restarting. NB! Secondary leads to lamps must not exceed 2 m. Primary and secondary leads must not cross one another. Primary and secondary cables must not cross one another. This can cause noise.

Distribution terminals 74-291

Order numbers Product

74-293 (AMP)

Type

Converter 20-60 W 74-210 Converter 10-105 W 74-212 Converter 35-150 W 74-213 Converter 50-200 W 74-214 Distribution terminal 74-291 Distribution term. AMP 74-293 Power amplifier 74-290

EAN no.

5703102 003751 5703102 003768 5703102 003805 5703102 006639 5703102 002631 5703102 201799 5703102 002549 R5

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Electronic converters with AMP plugs for low-voltage halogen lamps

74-224 H

Dimensions

• • • •

74-227

• • Technical data Supply voltage Secondary voltage Current 74-224 74-227

L 162 212

x x x

B 45 46

x x x

230 V 50-60 Hz 11,5 V output 70 W: 0,31 A 120 W: 0,50 A 70 W: 10-70 W 120 W: 20-120 W

Output

H 17 21

Short circuit and overload protection Electronic cutout Automatic reconnection once fault corrected

Connection

11,5V~ 6 AMP

230V/50Hz

Connection Gentle connection of light source Soft start prevents starting current peak Ambient temperature Casing temperature

maks. 50° C 70 W: maks. 70° C 120 W: maks. 80° C

Overheating protection 12V

12V 230V

Low-voltage directive Primary cable

230V

12V

Secondary cable Insulation class

thermal cutout EN 61046

2 x 0,75 mm² x 2 meter with Euro plug 6 AMP Class II

Flat models Soft start Off-load protection Short circuit and overload protection Overheating protection Adjustable with trailing edge dimmer (R-C)

Electronic converters are used for low-voltage halogen lamps and can be adjusted with rear edge dimmers. The converters have a soft start, which protects the bulbs and thus extends their useful life. The electronic converter cuts out automatically in the event of a short circuit or an overload 1.8 times the nominal output. The converter does not have a traditional built-in fuse. The secondary circuit with the load is therefore not separate. Once a fault has been corrected, the converter will automatically reconnect the load. N.B. The length of the secondary cables to the lamps may not exceed 2 m. Primary and secondary cables must not cross one another. This can cause noise.

230V

12V

230V

max. 2m

12V

12V 230V

max. 2m

N L

230V DIMMER

12V 230V 12V 230V

12V

Order numbers

12V

Product

Type

EAN no.

Converter 70 W AMP 74-224 5703102 201645 Converter 120 W AMP 74-227 5703102 201669 Power amplifier 74-290 5703102 002549 R0

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Product data Dimension

Electronic converters for low-voltage halogen lamps

74-230

• • • •

17,5 152

43,5 32

4,5 8

74-231

138

• 74-231

Electronic converters are used for low-voltage halogen lamps and can be adjusted with rear edge dimmers.

18 8

4,5

Technical data

Supply voltage Secondary voltage Current

148 175

Effect

230 V 50-60 Hz 70 W: 11,7 V eff. 105 W: 11,8 V eff. 70 W: 0,33 A 105 W: 0,45 A 70 W: 20-70 W 105 W: 20-105 W

Short circuit and overload protection Electronic cutout Connection Gentle connection of light source Soft start prevents starting current peak

Connection

230 V AC

12 V AC

Ambient temperature Casing temperature Secondary cable Overheating protection Low-voltage directive

Flat models Soft start Off-load protection Short circuit and overload protection Overheating protection

70 W: 120 W:

max. 50° C max. 70° C max. 80° C 2 x 1,5 mm² as minimum

Thermal cutout EN 61046

The converters have a soft start, which protects the bulbs and thus extends their useful life. Overload or over-temperature protection by automatic reduction of power. The electronic converters cuts out automatically in the event of a short circuit. The converter does not have a traditional built-in fuse. The secondary circuit with the load is therefore not separate. Once a fault has been corrected, the converter will automatically reconnect the load. N.B. The length of the secondary cables to the lamps may not exceed 2 m. Primary and secondary cables must not cross one another. This can cause noise.

12 V AC

Insulation class

230 V AC

Class II

12 V AC

SEC AC 12 V ~

PRI AC 230 V ~

74-230

Distribution terminals 74-291

74-231

SEC AC 12 V ~

PRI AC 230 V ~

Order number 74-293 (AMP)

Product

Converter 20-70 W Converter 20-105 W Distribution terminal Distrib. terminal AMP Power amplifier

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Type

74-230 74-231 74-291 74-293 74-290

EAN no.

5703102 201812 5703102 203304 5703102 002631 5703102 201799 5703102 002549

Notes

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Notes

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Type survey Type

EAN no.

Description

Type

EAN no.

Description

16-901 16-903

5703102 002587 5703102 003263

Electronic starter 16-125 W Electronic starter 4-22 W

Page 53 53

74-592 74-593

5703102 201461 5703102 201478

4-push button, Opus Push button, Opus

28 28

18-092 18-093

5703102 203250 5703102 203267

Minilux control with light sensor Minilux control with nightblock

9 11

76-922 76-923

5703102 201737 5703102 201744

Wireless push button 2-channel Wireless push button 4-channel

59 59

36-080 36-080 36-092 36-982

5703102 203298 5703102 203298 5703102 203908 5703102 203496

Minilux control - outdoor Control - indoor Minilux control Power Pack

18 22 13 34

77-050 77-910 77-920

5703102 204523 5703102 205049 5703102 204691

Luxstat control box External IR-receiver IR-remote

29 30 30

41-042 41-044 41-047 41-054 41-055 41-201 41-227 41-231 41-232 41-233 41-262 41-270 41-271 41-272 41-274 41-279 41-300 41-301 41-302 41-320 41-330 41-340 41-380 41-400 41-440 41-549 41-580

5703102 201270 5703102 201287 5703102 201294 5703102 203588 5703102 204202 5703102 203366 5703102 006806 5703102 203335 5703102 203342 5703102 203359 5703102 203229 5703102 203540 5703102 203557 5703102 203564 5703102 203571 5703102 204318 5703102 201065 5703102 201768 5703102 203922 5703102 201072 5703102 201195 5703102 201201 5703102 204998 5703102 203601 5703102 204004 5703102 204547 5703102 203991

Minilux day/night switch, 12 V Minilux day/night switch, 24 V Minilux day/night switch, 230 V Minilux day/night switch, 230 V Minilux day/night switch, 230 V Movement sensor Minilux movement sensor Minilux movement sensor Minilux movement sensor Minilux movement sensor Minilux movement sensor Movement sensor PIR Movement sensor PIR Movement sensor PIR Movement sensor PIR Movement sensor PIR Movement sensor PIR, 230 V Movement sensor PIR wireless Movement sensor PIR, 230 V Movement sensor PIR, 230 V Movement sensor PIR, 230V Movement sensor PIR, 24 V Movement sensor PIR wireless Movement sensor PIR, 230 V Movement sensor PIR, 24 V Movement sensor PIR, 24 V Movement sensor wireless

8 7 4 5 6 47 14 15 16 17 19 36 37 38 39 46 49 56 50 49 51 44 57 48 40 45 58

78-000 78-050 78-980 78-983

5703102 201348 5703102 201355 5703102 201775 5703102 201379

Control, On/Off Luxstat Control, DIN Power Supply Luxstat Power Pack

23 25 35 27

79-050 79-210 79-930 79-980 79-981 79-990 79-995

5703102 204592 5703102 204844 5703102 204639 5703102 204660 5703102 204745 5703102 204684 5703102 205063

Luxstat control wireless Luxstat wireless cut-off control Luxstat USB stick Power supply - Control Power supply - LED armatur Luxstat basic software Luxstat service software

31 32 33 33 33 33 33

43-161 43-196 43-197 43-198 43-205 43-208 43-215 43-222 43-225 43-997 43-998

5703102 205025 5703102 203373 5703102 203311 5703102 203595 5703102 005687 5703102 005809 5703102 005700 5703102 005706 5703102 005724 5703102 201843 5703102 201850

Wireless selfpow. light sensor Minilux light sensor Light sensor Minilux light sensor Sensor DT-A Sensor PIR-A Sensor DT-A Sensor UL-A Sensor DT-A Protection cap Protection cap

55 10 54 12 41 42 41 43 41 52 52

70-100

5703102 204851

Wireless receiver

74-010 74-040 74-210 74-212 74-213 74-214 74-224 74-227 74-230 74-231 74-290 74-360

5703102 002532 5703102 006561 5703102 003751 5703102 003768 5703102 003805 5703102 006639 5703102 201645 5703102 201669 5703102 201812 5703102 203304 5703102 002549 5703102 203274

Dimmer - ceiling Dimmer push button controlled Electronic converter, 60 W Electronic converter, 105 W Electronic converter, 150 W Electronic converter, 200 W Electronic converter, 70 W Electronic converter, 120 W Electronic converter, flat 70 W Electronic converter, flat 105 W Power up dimmer Minilux Control

61 63 66 66 66 66 67 67 68 68 62 20

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com

Page

The support is near... You are most welcome to contact us for help and guidance on our products and solutions.

20100105CWH 路 Tryk: grafisk arbejde

Contact our distributor or visit us at www.servodan.com for more information on intelligent lighting control.

Stenager 5 DK-6400 S酶nderborg Tel: +45 7442 4726 Fax: +45 7442 4035 info@servodan.dk www.servodan.com