Fall Protection Specialty Anchorage Connectors A variety of wrap around anchorage connectors and other connectors for beams will suit most applications. All anchorage connectors have a minimum breaking strength of 22 kN (5000 lbs.), unless otherwise stated. Beam Trolleys • Mounts anywhere on a suitable beam • Minimum turn radius of 12" (30.5 cm) • Fits widths of 2.3" (5.8 cm) to 6.5" (16.5 cm) Order No. SN139 Mfg. No. FP05
Bolt-On D-Ring Anchorage Connectors • Gate opening of 4 1/4" (10.8 cm) • Reduces roll-out possibilities • Mounting hardware required Order No. SAK492 Mfg. No. FP3730
Pass-Through Web Anchor Slings • 2" heavy-duty nylon web • Small D-ring passes through large D-ring to form a loop around the anchorage point
Spectra® Web Anchor Slings • Made of revolutionary Spectra® webbing for lightweight, small size, and exceptional strength • 1" web can be used without additional protective materials in concrete forming
SAK491
SAJ446 Order Mfg. No. No. Length' SAK491 FP03/4 4 SN136 FP03/6 6
Cable Anchor Slings • 1/4" (6.35 mm) galvanized steel cable • Swaged eyes at each end • PVC coated against corrosion
Order Mfg. No. No. Length' SN137 FP02/3 3 SN138 FP02/6 6
Concrete D-Ring Anchorage Connectors • Constructed of stainless steel, forged alloy steel and alloy steel • 5000-lb. anchorage point • Used for temporary or permanent applications • D-ring swivels 360º • Reusable D-ring assembly – install multiple bolt connectors if desired • Concrete must have a minimum of 3000 PSI, 6 1/4" thick, and hole must be places 15" away from any free edge • All bolt anchors must be placed at least 10" away from each other • Complies with OSHA, ANSI and ASTM E488 standards Order No. SEB928 Mfg. No. 2190055
32349E
231-236_Eng.indd 233
Order Mfg. No. No. Length' SAK501 FP242/2 2 SAK502 FP242/3 3 SAJ445 FP242/4 4 SAO629 FP242/5 5 SAJ446 FP242/6 6
SN137
Roof Anchors
• 5000-lb anchorage point can be reused • Forged alloy D-ring • Painted steel construction • Includes twenty 16D nails for single use • Total weight: 3 lbs. Order No. SEB388 Mfg. No. AJ730A
REUSABLE WEDGE ANCHOR CONNECTORs • Constructed of non-corrosive aluminum, stainless steel, and galvanized parts • 5000-lb. anchorage point • Vertical wall or overhead applications • Meets OSHA & ANSI Z359.1 standards Order No. SEB627 Mfg. No. 2190053
233 11-12-01 11:01 AM