Telehandlers_kurottajat

Page 1


Five TH models, countless applications.

At New Holland, we listen to our customers. We appreciate key telehandler demands vary between those seeking a telehandler with the reach to pick up, transport and stack large bales to those who need a maneuverable machine that will see daily use for livestock duties – and everything in between. With the TH series, New Holland has a telehandler to suit specific demands. As a guide, each model number gives a broad indication of its maximum lift height and capacity. As an example, TH6.36 models will lift to 6.10m and offer a 3,600kg capacity, the TH9.35 operating up to 9.10m and offering 3,500kg capacity. Compliant to Stage V emissions standards, enhanced performance and economy are matched to improved comfort and reduced operating costs. The very latest cab sets a benchmark for low noise and comfort. A choice of rear trailer hitch types and hydraulic brake coupling, dependant upon market, are available. The best in class 1000 hour service intervals ensure your investment is kept busy working for longer.

New TH range, as good as gold

For over 20 years New Holland telehandlers have continued to deliver an unrivalled mix of performance, dependability and affordability. The new TH series machines benefit from a striking new yellow and grey livery, reflecting their importance to the hay and forage sector and association with those product lines.

Plus models features include:

• air suspended seat

• HVAC ventilation system

• hydraulic quick coupler

• rear cab light pack

• telescopic steering column

• 1,000hr service intervals

Elite models features include:

• hydraulic pressure release

• armrest mounted joystick

• rear cab and boom light pack

• heated air suspensed seat

• automatic steering alignment

• rear electrical sockets

• 40kph max speed

• 1,000hr service intervals

• 160Lpm variable pump

Plus and Elite models are aimed at the most demanding operators who require maximum productivity and comfort at all times. These machines produce maximum power outputs of 133hp and 145hp respectively from a Stage V, 4.5 litre NEF engine and both feature new 6F-3R PowerShift™ transmissions. The transmission offering features two modes on Plus models, Manual and Semi-auto, Elite models feature three transmission modes, Manual, Semi-auto and Full-auto. The transmission modes make Plus and especially Elite models well suited to transport work and towing capacity with a braked trailer is a massive 20tons. On Elite models, the forward and reverse powershuttle can be selected via buttons on the main joystick or via an optional steering column mounted lever. The Elite range now includes the TH9.35 Elite model featuring a 9.1m reach aimed squarely at professional straw business.

More choice, more productivity.

In response to customer demand and the need to maximise productivity, the new TH product offering reach now five models with a total of nine variants, with three models within the important 7m category. Elite models feature 145hp engines, 3 mode 6x3 PowerShift™ transmissions, piston pump and a seat mounted joystick, Plus models feature 133hp engines and 6x3 PowerShift™ transmissions with 2 modes and a piston pump. All models are available with the new advanced hydraulic features. The new TH range is the product of years of development, investment and listening to customer feedback.

Superior visibility and comfort

The new TH range features an advanced cab design that offers improved comfort, noise suppression and visibility for maximum productivity at any time. The visibility has been increased thanks to a lower bonnet design on the right side of the cab. The new LED light option can produce up to 25,000lumen of combined lighting power to turn night into day and increase safety and productivity.

Enhanced quality

The TH telehandlers feature a twin U shaped robot welded boom, that is extremely rigid and durable. The H shaped ladder chassis has massive torsional strength and is engineered to operate in the most demanding applications. New Holland is committed to ongoing quality improvement and has invested in a new dedicated TH production line between 2012 and 2013.

Ease of ownership

Downtime is the enemy of productivity, that is why all TH telehandlers are engineered to minimise the need for routine maintenance for optimised dependability. Daily checks and routine care has been simplified, making it easier to look after the handler between its extended 1000-hour service intervals.

6.1m - 9.1m max reach

Automatic reversible cooling fan

Stage V ECOBlue™ HI-eSCR 2 engine, up to 145hp

1000 hour service intervals

3 mode steering with auto alignment option

See more for better productivity.

New Holland has taken its established expertise in tractor cab design and applied it to the 360° Vision Cab. Offering class-leading space and comfort, the cab affords excellent all-round visibility with an unparalleled view of the front of the carriage / forks when fully lowered. In work, this extra visibility boosts productivity in duties to include loader work and speeds up attachment changeovers.

More glass, brilliant visibility

Extensive research by New Holland has lead to the development of the 360° Vision Cab. A key aim was to help reduce ‘blind spots’ over the front of the boom, particularly when fully raised and fully lowered. By combining a wide and deep front screen with slim ‘A’ pillars, the visibility from the operators seat is greatly enhanced. Thanks to the new bonnet design, the front right side view has been improved with more than 9% enlargment.

Engineered for low noise

The best way to reduce noise is to eliminate its sources. By combining a number of design developments, TH in-cab noise levels are just 71dB(A). A key to the low noise levels is the ECOBlue™ HI-eSCR 2 equipped engines, these clean running power units also offering exceptionally low bystander noise levels.

• Transmission de-clutch & gear selection in addition to boom and 3rd service functions, can be operated from the joystick

• A forward /reverse shuttle lever is mounted on the joystick

• The steering column on Plus models features both height and tilt adjustment

• A pneumatic suspended seat is default spec on Plus models. For all models the air suspended seat can be upgraded with a heating function

Best in class armrest for maximum comfort and ergonomics

• The new armrest provides maximum arm and wrist comfort when using the joystick

• All main boom and machine controls are very close to operator allocated in a comfortable keypad on the armrest

• An ergonomic encoder gives the possibility to set parameters and interacts with the new InfoView™ screen

• A new keypad includes all the main controls of smart hydraulic features, shuttling, engine speed management, hydraulic power management, boom aggressiveness, rear view camera, different working mode

New InfoView™ LCD 7’’ display

Control all the parameters of your machine has never been so simple. Every setting and info are under your eyes inside a user-friendly 7’’ screen. All the machines’ parameters are very clear and visible to ensure the best driving experience. The InfoView™ screen also include the rear-view camera automatically triggered when you go in reverse.

More safety

The new TH is featured with a new Load Moment Indicator (LMI) system with LED and stable risk level. The LMI warns the operator when the machine reaches the maximum authorized load condition checking the load on the rear axle. The new system is now available with more stable signal and led lights showing a scale of tipping risk (green no risk, red high risk of tipping and hydraulics locked).

Clean performance.

• Dust and debris are blown from the engine cooling package, oil coolers and intercooler

• The same cycle is repeated by two electrical fans to clean aircon, fuel cooler and transmission radiators

Ground clearance at the lowest point under the axles is a generous 415mm

• Industrial tyre option are now available in 460mm size

New TH 6x3 transmission keeps it simple

• Gear changes are made via buttons on the seat mounted joystick

• New gear ratios result in greatly improved performance when climbing gradients and towing in higher transport gears

• Smooth direction changes are made via the steering column mounted shuttle lever

• Noticeably smoother shifting and acceleration are a result of the new transmission

• Single, manual transmission mode keeps things simple

TH Plus & Elite 6x3 transmission features auto modes

• Plus models feature a new 6F x 3R PowerShift™ transmission with 2 modes, Manual and Semi-auto

• Semi-auto mode is effective in gears 4, 5 and 6 and is ideal for transport duties

• When activated it selects the gear most appropriate to the forward speed and engine rpm

• Towing capacity with a braked trailer is 20tons

• Elite models feature the new 6x3 transmission with 3 modes, Manual, Semi-auto and Full-auto

• Full-auto mode is active between gears 2 -6 for great roading performances; Semi-auto mode operates between gears 2 - 4 to maximize productivity in yards and tight spaces

• Memory shuttle on Elite models remembers the last used forward and reverse gears when changing direction

• Choose between 3 driving modes: travel, loader or handler mode

Full time 4WD and auto traction control

• All TH models feature full time 4WD as standard

• Front limited slip differential is also standard on all models

• Rear LSD available on Plus and Elite models

• The differential directs up to 45% of available torque across the axle to ensure the wheel with the greatest traction always gets power

Hydraulic wet disc brakes

• Sealed wet disc brakes on both TH axles require minimal maintenance and can handle high transport speeds

• The hydraulic trailer brake circuit is linked to the TH’s brakes to enhance safety

• The parking brake* is automatically activated at any time the engine is switched off; it can be manually engaged by shuttle lever on steering column or via a dash mounted switch

* SAHR system (Spring Applied Hydraulic Release).

Manoeuvrability and steering modes

• Turning radius when 4WS is engaged is just 3.9m

• Transport mode permits the selection of 2WS only

• TH Elite models offer auto wheel alignment when switching between, all-wheel, crab and front steering; this feature is available as option for Plus models

Powerful hydraulics deliver fast work cycles.

Efficient hydraulics are key to telehandler productivity. This goes beyond pump capacity; efficient use of available oil, optimised ram sizes and effective control valves all making a contribution to overall performance. The new TH models benefit from New Holland’s 20 years of telehandler development, careful attention to the design of the hydraulic circuit not just improving cycle times but also in ensuring performance is maintained in demanding conditions to include extreme heat. Up to two optional front auxiliary hydraulic outlets, complete with valves and diverters, to control front mounted attachments can be specified. Additional rear auxiliary lines are also available.

Variable pump delivers high output at low engine speeds

• TH Plus models are fitted with a high performance, variable displacement, 140Lpm piston pump, on Elite models the maximum pump output is 160Lpm for a cycle times improvement of up to 25%

• Guaranteed to deliver high flow rates at all engine speeds but to also close down when there is no demand on the system

• This allows more engine power to be diverted to the transmission and is of particular value in duties to include transport and when climbing a silage clamp

Hydraulic cycle times (unladen)

External pressure release switch

• Switch attachments over quickly and easily without returning to the cab by pressing the Aux pressure relief switch located above the front fender

High flow hydraulic for best-in-class time

All the TH Elite models are now equipped with the new 160l/min hydraulic pump to extend the productivity. This new feature reduces about 25% the cycle time in lifting and lowering to complete the job faster.

Forklift mode

The new forklift mode will help you by simplifying stacking thanks to an automatic boom extension/retraction in lifting commanded by the operator to reach vertical position.

Adjustable boom aggressiveness

Customize the joystick sensitivity to match with all different drivers and applications. You can select between the low sensitivity which make move the boom on a long joystick movement for precision tasks, or the high sensitivity which is ideal to maximize the working speed.

Active bucket shake

This new feature will facilitate your daily work and improve the driving comfort of your TH. It’s now possible to activate the automatic bucket shaking to reduce the operator effort and get a more efficient discharge operation.

Hydraulic power management

When pushing into piles of material with high resistance, it’s essential to have constant hydraulic power to keep the task at hand going. That’s why the new TH are equipped with the hydraulic power management which automatically increases the engine speed when it recognises heavy loads.

Strength by design.

New Holland employs state-of-the-art manufacturing techniques and has invested millions in the production line for TH models. Robot welding is a key manufacturing process and ensures consistent quality during chassis and boom construction.

• Hydraulic end-stroke dampers ensure smooth boom retraction and extension

• Dampers also protect the boom and operator from regular shock loads

• Engineered 40/60 weight distribution eliminates the need for bolt-on counterweights

• Excellent stability and traction is achieved when loaded

• Chassis strength is boosted as a result of the in-built mass

• 45° low profile headstock design enables complete filling of roof cavities

• 142° tilt angle is default on Plus and Elite

• Manual or hydraulic attachment lock is available

Boom construction

• Twin U-shaped sections, 10mm - 12mm thick form the boom

• Heavy duty pins ensure optimum durability

• Boom wear pads are easy to adjust

• Boom brushes prevent debris entering the sliding sections

Lifting geometry

• The main lift ram is positioned under the boom

• Boom compensation cylinders have been replaced by an automatic attachment levelling system

• Thanks to a position sensor, the bucket levelling is electronically adjusted to always use the full bucket capacity without no losses

• This new system is easy to operate, it reduces the opearators’ fatigue and reduce the maintenance cost & time due to the removal of the compensation cylinder

Boom suspension

• Optional boom suspension reduces shock loads over rough terrain

• Automatic deactivation occurs when the boom exceeds a 35° lift angle

Chassis construction

• H-shape ladder chassis is made from 25mm high tensile steel

• Robot welding ensures exceptional torsional rigidity

• Exceptionally strong boom support negates the need to add extra counterweights

360°: TH.

New Holland has worked hard to reduce the maintenance demands of its new TH telehandlers and now boasts industry leading service intervals of 1000 hours for the engine and 1000 hours for the transmission oil.

• Adjusting the telescopic boom pads has been simplified, a simple nut screw and lock nut system making adjustment quick and easy

• 140 litre fuel tank features a wide filler neck and is easy to access

• 27 litre capacity AdBlue tank is conveniently located next to the diesel tank for simultaneous refilling

• The engine air filter is easy to check, clean or replace, without the need for tools

1000 hour service interval for engine.

1000 hour service interval for transmission oil.

The compact cooling package is mounted on a frame that enables the radiators to both swing out and tilt for easy cleaning.

• All models feature 12 daily grease points

• Grouped grease nipples are optional to grease the axles, lift and compensation cylinders

The engine hood lifts on gas struts for full access.

Auto lubrication system

• New auto-lube system ensures that all important lubrication points receive the right amount of grease at the right time

• Manual activation is possible from the cab

• Headstock grease points are serviced by a separate dispenser unit

• An additional dispenser unit is fitted to the extra boom section on 9m models

New Holland Services.

Finance tailored to your business

CNH Industrial Capital, the financial services company of New Holland, is well established and respected within the agricultural sector. Advice and finance packages tailored to your specific needs are available. With CNH Industrial Capital, you have the peace of mind that comes from dealing with a financing company that specialises in agriculture.

Your dedicated New Holland dealer technicians receive regular training updates. These are carried out both through on-line courses as well as intensive classroom sessions. This advanced approach ensures your dealer will always have the skills needed to look after the latest and most advanced New Holland products.

Uptime Warranty – because your peace of mind is priceless

Uptime Warranty programme provides owners of New Holland agricultural machinery with repair services covering your machinery over the Manufacturer’s contractual Warranty. Maximum control over operating costs, repairs completed by authorized NH Dealers using NH genuine parts, higher re-sale value of your machine, transferable coverage.

New Holland Apps

New Holland Style

Want to make New Holland a part of your everyday life? Browse the comprehensive selection on www.newhollandstyle.com. A whole range of items are available including hard wearing work clothing and a vast selection of scale models, together with so much more. New Holland. As individual as you.

MyNew Holland Harvest

Engine* NEF N45

Compliant with engine emissions regulations Stage V

Displacement / No. of cylinders / Valves (cm3)

4500 / 4 / 4

Aspiration Turbo Aftercooler

Fuel system

High Pressure Common Rail

Exhaust system ECOBlue™ HI-eSCR 2 (Selective Catalyst Reduction)

Rated power - ISO 14396 - ECE R120 [kW/hp(CV)] 89/121@2200rpm 96/131@2200rpm

Max power - ISO 14396 - ECE R120 [kW/hp(CV)] 98/133@1800rpm 107/145@1800rpm

Max torque - ISO 14396 - ECE R120 (Nm) 549@1500rpm 591@1400rpm

Transmission

Traction 4WD

Type of transmission PowerShift™

Number of gears (FxR) 6x3

Gear shifting modes Manual, Semi-Auto

Gear shifting control

Shuttling control Lever on steering column

Incorporate on joystick

Manual, Semi-Auto, Full-Auto

Incorporate on joystick optional lever on steering column

Max speed (kph) 40 34 40

Brakes

Service brake actuation Hydraulic power assisted

Service brake type Oil immersed discs

Discs per axle (front / rear) 6 / 4

Parking brake SAHR (Spring Applied Hydraulic Release) integrated in Front Axle

Axles and differentials

Front axle type Limited Slip differential

Rear axle type Limited Slip differential

Steering

Actuation Power steering

Operating modes 2WS, 4WS, Crab

Manual wheel alignment with visual indicators

Automatic wheel alignment

Tyres

Size

500/70R24 460/70R24

Pattern type Agriculture, Industrial

Hydraulics

Variable

- 500/70R24

New Holland Top Service: customer support and customer information.

Top Availability

If you need information, or have an out of hours question, ring our toll-free number*. All day, every day, we are just a call away.

Top Speed

Express parts delivery: when you need it, where you need it!

Top Priority

Fast-track solution during the season: because your harvest can’t wait!

For more details, ask your New Holland dealer!

Top Satisfaction

We drive and track the solution you need, keeping you informed: until you are 100% satisfied!

* Calls to the Top Service team are free from landlines in the United Kingdom and Republic of Ireland. UK-based mobile calls are also free, but Republic of Ireland mobile users should call 01 2421881 and this will be charged at your standard network rate.

www.newholland.com/uk - www.newholland.com/ie

New Holland

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.