2021 NEW PRODUCT CATALOGUE (FIRST HALF)
2021 REELS
2021 RODS
2021 REELS
CHALLENGE THE IMPOSSIBLE
NEW PRODUCT RELEASE –2021–
DESIGNED TO CHALLENGE THE IMPOSSIBLE, THE NEW TWIN POWER SW IS STRONGER AND MORE DURABLE THAN EVER. The inclusion of Infinity Drive reduces handle rotation torque by a maximum of 30% when compared to the previous series. Heat Sink Drag features in the 10000 and 14000 sizes to reduce the amount of heat transferred to the drag washers and line during the fight. The X-Protect seal and labyrinth structure repels water intrusion, with the line roller and clutch assembly, the mechanism is more than ten times more durable according to Shimano internal tests. The new striking silver and blue cosmetics have been paired up with a polished metal handle and power knob to finish the reel off superbly. Engineered to the highest standard for the world’s hardest fighting saltwater species.
MODEL
DESCRIPTION
RRP
CAPACITY DIA (MM-M)
CAPACITY POWER PRO (LB/YARD)
GEAR RATIO
RETRIEVE PER CRANK (CM)
BEARINGS
DRAG POWER (KG)
WEIGHT (G)
TPSW4000XGC
TWINPOWER SW C 4000XG
$739.00
0.30/180
(15/230)
6.2:1
101
9+1
11
350
TPSW5000XGC
TWINPOWER SW C 5000XG
$799.00
0.37/150
(20/245)
6.2:1
105
10+1
13
415
TPSW6000XGC
TWINPOWER SW C 6000XG
$799.00
0.37/190
(30/290)
6.2:1
112
10+1
13
420
TPSW8000HGC
TWINPOWER SW C 8000HG
$899.00
0.37/275
(40/340)
5.6:1
94
10+1
25
615
TPSW10000PGC
TWINPOWER SW C 10000PG
$899.00
0.40/300
(50/360)
4.9:1
102
10+1
25
655
TPSW14000XGC
TWINPOWER SW C 14000XG
$899.00
0.40/330
(50/400)
6.2:1
134
10+1
25
660
TWINPOWER SWC MODELS
TWINPOWER SW C 4000XG
TWINPOWER SW C 5000XG
TWINPOWER SW C 6000XG
TWINPOWER SW C 8000PG
TWINPOWER SW C 10000PG
TWINPOWER SW C 14000XG
UPGRADED DRAG WITH HEAT RESISTANCE
Light and Powerful Winding With Infinity Drive, the pinion gear inner does not make contact with the main shaft, as highsliding bushing supports the main shaft and sliding resistance is reduced. In addition to this, a special skidding coating on the main shaft helps to further reduce sliding resistance. Infinity Drive cuts handle rotation torque by about 30 per cent in comparison to the conventional system, and makes the reel more powerful. This enables anglers to wind more aggressively, even under heavy load.
The ‘Heat Sink Panel’, where the heat generated by drag is released, stops any decrease in drag performance, due to thermal sagging, by around 50 per cent. The ‘Insulation Sheet’, which blocks heat transfer to the spool, prevents spool temperatures from increasing by around 30 per cent.
HAGANE GEAR More Robust Gearing The Hagane Gear is produced by applying approximately 200 tons of pressure to the raw metal through unique technology called Precision Cold Forging. Delivered with micron accuracy, no cutting work is involved.
SUPERIOR Water Resistance X-Protect was developed for stopper bearing protection in the previous model and provided high level water resistance. The Twin Power SW employs X Protect for its line roller as well, and further improves its waterproofing performance and bearing durability is ten times greater than conventional designs.
HAGANE BODY
2014
TWINPOWER SW COMPARISON
Highly Rigid Body Design The Hagane Body chassis is made of highly rigid aluminium alloy. It eliminates flex, warp and distortion of the reel, and protects the engagement of gears inside. This allows for smoother winding.
BODY - ROTOR MATERIAL
Rotor
GEAR
Infinity Drive
2021
TWINPOWER SW
TWINPOWER SW
ALUMINIUM
ALUMINIUM
Hagane Body
Hagane Gear OTHER
Heatsink Drag
10000 & 14000
Cross Carbon Drag Water Resistance
X-PROTECT
X-PROTECT (IPX8)
THE STRONGEST MAGNUMLITE
NEW PRODUCT RELEASE –2021–
THE NEW TWIN POWER XD HAS BEEN REDESIGNED AND REFINED TO SET A NEW STANDARD IN SALTWATER DURABILITY. SUITED TO INSHORE LIGHT JIGGING AND LURE CASTING. The Micro Module Gear II and Silent Drive makes the gearing extremely silent and smooth. The main Hagane Gear provides strong cranking power and X-Protect provides superior saltwater resistance. The redesigned Long Stroke Spool provides improved casting distance and the new MGL Rotor delivers ultra-light friction free rotation. Ci4+ construction reduces weight by 35 to 55 grams when compared to the original TWIN POWER XD from 2017 and the aluminium Hagane Body provides rigidity. Featuring a Cross Carbon Drag system that outputs up to 11kg and all models are fitted with upgraded power handle knobs.
TWIN POWER C3000 HGA
TWIN POWER 4000 XGA
RRP from $769 00 MODEL
DESCRIPTION
RRP
CAPACITY DIA (MM-M)
CAPACITY POWER PRO (LB/YARD)
GEAR RATIO
RETRIEVE PER CRANK (CM)
BEARINGS
DRAG POWER (KG)
WEIGHT (G)
TPXDC3000HGFA
TWIN POWER COMPACT 3000 HGA
$769.00
0.25/210
(10/200)
6.0:1
89
10+1
9
200
TPXD4000XGFA
TWIN POWER 4000 XGA
$779.00
0.30/180
(15/230)
6.2:1
101
10+1
11
245
TPXDC5000XGFA
TWIN POWER COMPACT 5000 XGA
$779.00
0.35/175
(20/260)
6.2:1
101
10+1
11
245
SILENT DRIVE Seamless Gear Engagement From the fundamental, whole body design to the most intricate parts of the drive train, including the drive gear, wormshaft, wormshaft pin and wormshaft gear, every piece has been carefully reviewed, and the smallest clearance gaps and wobbles have been eliminated to the highest tolerances.
MGL ROTOR Ultra light friction free rotation The redesigned Magnumlite Rotor delivers ultra light, almost friction free rotation, enabling you to control the retrieve with ultimate precision and sensitivity. Lures become even more animated when using the MGL Rotor reel, and the ultra light experience lets you feel every movement of the lure, the bottom and ultimately the strike of the fish, no matter how slight it is.
HAGANE GEAR More Robust Gearing The Hagane Gear is produced by applying approximately 200 tons of pressure to the raw metal through unique technology called Precision Cold Forging. Delivered with micron accuracy, no cutting work is involved.
HAGANE BODY
SUPERIOR Water Resistance
Highly Rigid Body Design The Hagane Body chassis is made of highly rigid aluminium alloy. It eliminates flex, warp and distortion of the reel, and protects the engagement of gears inside. This allows for smoother winding.
X-Protect was developed for stopper bearing protection in the previous model and provided high level water resistance. The Twin Power XD employs X Protect for its line roller as well, and further improves its waterproofing performance and bearing durability is ten times greater than conventional designs.
LONG STROKE SPOOL
AR-C SPOOL The special shape of the spool ring ensures the best line release.
2017
TWINPOWER XD COMPARISON
The long stroke spool design improves casting performance when compared to the previous model due to improved line flow from the spool.
BODY - ROTOR MATERIAL
Rotor Ci4 Material Hagane Body Micromodule II
GEAR
Silent Drive Hagane Gear
OTHER
Cross Carbon Drag Long Stroke Spool
2021
TWINPOWER XD
TWINPOWER XD
MGL
NEW MGL
EXPERIENCE THE CRANKING POWER
NEW PRODUCT RELEASE –2021–
PURPOSE-BUILT FOR OFFSHORE AND SALTWATER FISHING, THE STRADIC SW HAS THE POWER AND TOUGHNESS REQUIRED TO TACKLE HARD FIGHTING SALTWATER SPECIES. By adopting Infinity Drive technology from the Stella SWC, the Stradic SW has improved pinion gear support and less gear resistance to provide greater cranking power when you need it during the fight. This feature is combined with a more robust body design and upgraded power handle knob, which differentiates it from the Stradic FL series which is dedicated to lighter tackle pursuits. The rigid metal Hagane Body and cold forged Hagane Gear combine to deliver the performance expected from all Shimano spinning reels. To maintain a high standard of saltwater performance, X-Protect has been incorporated throughout the reel to provide greater durability to key areas like the line roller and clutch assembly to an IPX8 standard.
RRP from $44900 MODEL
DESCRIPTION
RRP
CAPACITY DIA (MM-M)
CAPACITY POWER PRO (LB/YARD)
GEAR RATIO
RETRIEVE PER CRANK (CM)
BEARINGS
DRAG POWER (KG)
WEIGHT (G)
STSW5000XG
STRADIC SW 5000XG
$449.00
0.33/200
(20-245)
6.2:1
105
6+1
12
430
STSW6000XG
STRADIC SW 6000XG
$469.00
0.33/240
(30/290)
6.2:1
112
6+1
12
440
STSW8000PG
STRADIC SW 8000PG
$489.00
0.37/275
(40/340)
4.9:1
94
6+1
13
650
STSW10000HG
STRADIC SW 10000HG
$499.00
0.40/300
(50/360)
5.6:1
116
6+1
13
660
STRADIC SW MODELS
STRADIC SW 5000XG
STRADIC SW 6000XG
STRADIC SW 8000PG
STRADIC SW 10000HG
SUPERIOR Water Resistance X-Protect was developed for stopper bearing protection in the previous model and provided high level water resistance.
Light and Powerful Winding With Infinity Drive, the pinion gear inner does not make contact with the main shaft, as highsliding bushing supports the main shaft and sliding resistance is reduced.
The Stradic SW employs X Protect for its line roller as well, and further improves its waterproofing performance and bearing durability is ten times greater than conventional designs.
In addition to this, a special skidding coating on the main shaft helps to further reduce sliding resistance. Infinity Drive cuts handle rotation torque by about 30 per cent in comparison to the conventional system, and makes the reel more powerful. This enables anglers to wind more aggressively, even under heavy load.
X-SHIP
X-Shield
Highly Rigid Body Design
Water Resistant Seals By placing sealing gaskets in 12 critical locations throughout the rigid aluminium body, we are able to create a water resistant structure that can hold up against the toughest conditions and fish that Mother Nature has to offer.
HAGANE BODY Maximum Rigidity The Hagane Body chassis is made of highly rigid aluminium alloy. It eliminates flex, warp and distortion of the reel, and protects the engagement of gears inside. This allows for smoother winding.
X-Ship stands for Extra, Smooth and High Power. By supporting the pinion gear on both ends with SA-RB bearings and introducing a bigger drive gear, Shimano increased gearing efficiency and higher power. This results in a fishing reel with ultra-light handle rotation for less effort, even under heavy loads.
Hagane Gear The Hagane Gear is produced by applying approximately 200 tons of pressure to the raw metal through unique technology called Precision Cold Forging. Delivered with micron accuracy, no cutting work is involved.
NEW PRODUCT RELEASE –2021–
TAKING FINESSE SPINNING TO THE NEXT LEVEL IS THE NEW EXSENCE THAT FEATURES SHIMANO’S BEST TECHNOLOGIES, ALL IN A SUPER LIGHTWEIGHT FRAME. An upgrade on the previous Exsence model, the new series is more than 20g lighter than the previous model, features a new Long Stroke Spool design and has been upgraded to the incredibly smooth Micro Module Gear II system. To stand up to the test of saltwater, 11 Shielded A-RB bearings and a one-piece titanium bail are combined with the benefits of the X-Protect system to provide superior on water performance.
RRP from $ 94900
MODEL
DESCRIPTION
RRP
CAPACITY DIA (MM-M)
CAPACITY POWER PRO (LB/YARD)
GEAR RATIO
RETRIEVE PER CRANK (CM)
BEARINGS
DRAG POWER (KG)
WEIGHT (G)
EXSC3000MHGA
EXSENCE C3000MHG A
$949.00
0.25/125
(10/150)
6.0:1
89
11+1
9
195
EXS4000MXGA
EXSENCE 4000MXG A
$949.00
0.25/165
(10/150)
6.2:1
86
11+1
11
220
NEW PRODUCT RELEASE –2021–
BUILDING UPON PREVIOUS GENERATIONS OF THE SEPHIA BB REEL FAMILY, THE NEW MODELS ARE BUILT LIGHTER AND TOUGHER. PERFECT FOR GETTING THE BEST OUT OF YOUR JIGS AND IN TURN, MAKING IT EASIER TO TEMPT THOSE SQUID INTO GRABBING YOUR LURE. Equipped with the sturdy Hagane Gear that increases strength, while maintaining smoothness, you’ll be work your jigs all day without trouble. The mix of the G Free Body, AR-C Spool and One-Piece Bail also makes for increased smoothness and comfort cast after cast.
SEPBBC3000S
X-Ship, bought down from top tier models, offers you more efficient gearing and more power. This in turn gives the angler ultra-light handle rotation with less effort, even under load. By increasing the efficiency of the Sephia BB reels, they’ll be able to perform at their best for longer. Coming in a shallow spool C3000SHG and C3000SDHG (Twin Paddle Handle), these are the perfect reels for chasing Squid. On top of this, you’ll finally be able to pair them up with the Sephia BB range of rods for an awesome looking combo.
RRP from $279 00 SEPBBC3SDHHG
MODEL
DESCRIPTION
RRP
CAPACITY DIA (MM-M)
CAPACITY POWER PRO (LB/YARD)
GEAR RATIO
RETRIEVE PER CRANK (CM)
BEARINGS
DRAG POWER (KG)
WEIGHT (G)
SEPBBC3000S
SEPHIA C3000SHG
$279.00
0.08/150
(0.6/200)
6.0:1
88
5+1
9
235
SEPBBC3SDHHG
SEPHIA C3000SDHG
$299.00
0.08/150
(0.6/200)
6.0:1
88
5+1
9
250
THE TECHNICAL VERSATILE
NEW PRODUCT RELEASE –2021–
THE METANIUM MGL SETS THE STANDARD FOR BAITCASTERS IN THE AUSTRALIAN MARKET. THIS FLAGSHIP BAITCAST MODEL FEATURES A MAGNESIUM CORESOLID BODY WHICH IS DESIGNED TO DELIVER UNMATCHED DURABILITY, RIGIDITY AND SENSITIVITY. Taking this to the next level is the addition of the Magnumlite Spool III which decreases spool inertia by 17%. To further enhance castability and control, the New SVS system has been included to provide a wider range of brake adjustment via the external dial. The Micro Module main gear is made from a solid brass construction that ensures long-term durability and smoothness. Silent Tune technology reduces spool bearing vibration and improves casting performance when compared to conventional systems. The Metanium MGL has been extensively tested by Shimano field testers for over 12 months in Australia’s top end region which is renowned for extreme saltwater conditions. This makes it ideal for anglers right around the country looking for a top tier baitcaster.
RRP from $ 64900 DESCRIPTION
RRP
CAPACITY DIA (MM-M)
CAPACITY POWER PRO (LB/YARD)
GEAR RATIO
RETRIEVE PER CRANK (CM)
BEARINGS
DRAG POWER (KG)
WEIGHT (G)
METANIUM MGL 150 B
$649.00
-
(20-150)
6.2:1
66
10+1
5
180
METMGL150HGB
METANIUM MGL 150 HGB
$649.00
-
(20-150)
7.1:1
76
10+1
5
180
METMGL151HGB
METANIUM MGL 151 HGB
$649.00
-
(20-150)
7.1:1
76
10+1
5
180
MODEL METMGL150B
X The Magnum Light Spool III benefits the angler with a reduction of inertia from the spool that benefits both winding and casting. The Core Solid Body is a one piece Magnesium body that’s highly durable, yet compact in the hand as the main frame and level wind protector are one. For the first time in the new Metanium, these 2 innovative technologies have been condensed into one reel. The Magnum Light Spool III, which boasts a light start up and overwhelming ease of retrieving line, is housed in a highly rigid and compact Core Solid Body which in turn, supports the use of lighter lures and allows anglers to cast them further into snags and the like. The increased strength of the spool and the body allows anglers to fish lighter, but also harder for the finnicky, tough species. While maintaining the fact that the Metanium series strength is its lightness, the range also brings with it the improved ability to handle more powerful and technical styles of fishing. The new Metanium series has raised the bar for the standard of versatility.
SVS INFINITY SVS Infinity provides 6 settings and an adjustable brake dial to deliver a much wider and more precise range for maximum control and consistent brake performance in all conditions If you need finer settings, you can make adjustments with the internal brake shoes.
S3D SPOOL MICROMODULE II GEAR
The Shimano Stable Spool Design technology features balanced and uniform thin wall aluminium construction throughout the spool. This precision significantly reduces spool vibration and creates an incredibly smooth feeling when casting and retrieving
NORMAL GEAR
SMOOTHER GEARING
SILENT TUNE
Featuring a finer tooth main gear for more efficient winding. The surfaces of the drive gear and pinion gear have also been analysed and updated from the ground up in pursuit of perfection. Starting from an already industry leading standard, reduced reel noise and an even smoother gear feeling has been achieved.
O-rings are placed on the inner and outer diameters of the bearing which improves the degree of adhesion with the shaft and frame. This improved adhesion reduces internal rattling, eliminates any rotational loss and achieves silence when cranking and a smooth feel.
NEW PRODUCT RELEASE –2021–
EXTENDING THE EXISTING OCEA JIGGER RANGE, THIS SPECIALIST LARGE CAPACITY 4000 SIZED REEL IS DESIGNED FOR DEEP OFFSHORE JIGGING AND PACKS 18KG OF DRAG POWER. Representing the very best in Shimano reel technology, featuring Micromodule Gear, Hagane Body and X-Protect for the ultimate in strength and durability. A specially designed forged long crank handle provides anglers with the ability to work a jig and fight a fish with unprecedented ease. Line capacity is no longer an issue with the new 4000 size as it can hold 580m of PE6 Ocea 8 Braid which makes it perfect for chasing monsters of the deep.
RRP from $ 879 00
MODEL
DESCRIPTION
RRP
CAPACITY DIA (MM-M)
CAPACITY PE (M)
GEAR RATIO
RETRIEVE PER CRANK (CM)
BEARINGS
DRAG POWER (KG)
WEIGHT (G)
OCEAJG4000
OCEA JIGGER 4000
$879.00
-
4/900, 5/700, 6/580
4.4:1
101
6+1
18
785
OCEAJG4000HG
OCEA JIGGER 4000 HG
$879.00
-
4/900, 5/700, 6/580
5.1:1
117
6+1
18
790
2021 RODS
6
HIGH PERFORMANCE PREMIUM MODELS
NEW PRODUCT RELEASE –2021–
DESIGNED TO BE THE ULTIMATE IN HIGH-PERFORMANCE RODS, THE POISON ADRENA RODS ARE BUILT TO PROVIDE SUPERIOR SENSITIVITY AND PERFORMANCE THAT WILL CHANGE THE WAY YOU FISH. Built upon high modulus carbon blanks, the Poison Adrena features Spiral X Core construction which uses multiple layers of diagonally wound materials inside and outside maximises feel by allowing vibrations to travel freely down the length of the blank and back to your hand for maximum feel. Fuji K Stainless SiC guides and Titanium SiC tip provide the premium components anglers demand and complement the already flawless features of this series.
Full Carbon Monocoque Lightweight, hollow rod butt construction
RRP from $549 00 MODEL
DESCRIPTION
RRP
LENGTH (M/FT)
PIECES
LINE WT KG (LB)
LURE WT. G (OZ)
BLANK
BUTT ASSEMBLY
GUIDE
PADRN166M2
POISON ADRENA 6'6" MEDIUM BAITCAST
$549.00
1.98 / 6'6"
2
(8-16)
7 - 21
SPIRAL X CORE
CI4+ REEL SEAT / FULL CARBON MONOCOQUE
FUJI K Stainless SIC / FUJI Titanium SIC TIP
PADRN1610MH2
POISON ADRENA 6'10" MEDIUM HEAVY BAITCAST
$549.00
2.08 / 6'10"
2
(10-20)
10 - 30
SPIRAL X CORE
CI4+ REEL SEAT / FULL CARBON MONOCOQUE
FUJI K Stainless SIC / FUJI Titanium SIC TIP
PAD173MHA
POISON ADRENA 7'3" HEAVY BAITCAST
$549.00
2.21 / 7'3"
2
(10-20)
10 - 30
SPIRAL X CORE
CI4+ REEL SEAT / FULL CARBON MONOCOQUE
FUJI K Stainless SIC / FUJI Titanium SIC TIP
PADRN268UL
POISON ADRENA 6'8" ULTRA LIGHT SPIN
$549.00
2.03 / 6'8"
2
(2.5-5)
2-7
SPIRAL X CORE
CI4+ REEL SEAT / FULL CARBON MONOCOQUE
FUJI K Stainless SIC / FUJI Titanium SIC TIP
PADRN267ML
POISON ADRENA 6'7" MEDIUM LIGHT SPIN
$549.00
2.01 / 6'7"
2
(4-12)
4 - 12
SPIRAL X CORE
CI4+ REEL SEAT / FULL CARBON MONOCOQUE
FUJI K Stainless SIC / FUJI Titanium SIC TIP
PAD2611MHA
POISON ADRENA 6'11" MEDIUM HEAVY SPIN
$549.00
2.11 / 6'11"
2
(6-12)
7 - 21
SPIRAL X CORE
CI4+ REEL SEAT / FULL CARBON MONOCOQUE
FUJI K Stainless SIC / FUJI Titanium SIC TIP
2
SLOW JIGGING MODELS NEW 20GTJSJB662
PRODUCT RELEASE –2021–
STEP UP YOUR GAME WITH THESE PURPOSE DESIGNED SLOW JIGGING RODS FOR ANGLERS LOOKING FOR THE ULTIMATE IN PERFORMANCE. Built on the same high-performance Spiral X Core and Hi-Power X rod blank, the Game Type Slow J rods have the strength and sensitivity required to pitch slow jigs with maximum control. The parabolic blank action provides a great control and plenty of power to turn a fighting fish away from the bottom. Whether fishing deep with heavy jigs or shallow with a delicate presentation, there is no equal for targeting both pelagic and reef fish than that of the Game Type Slow J rods.
RRP from $529 00
1.4X
INCREASED TORSION STRENGTH
2.5X
BRINGING NEXT GENERATION STRENGTH TO ALL AREAS OF THE ROD Spiral Core X is built into the core of the rod during the manufacturing process by using nanoalloy technology which provides greater strength and flexibility on a microscopic scale. The high quality carbon tape is glued into the rod core with a high-strength resin which results in increased strength in all directions.
INCREASED
COMPRESSION STRENGTH
RRP
LENGTH (M/FT)
PIECES
LINE LURE WT. WT G (OZ) KG (LB)
MODEL
DESCRIPTION
20GTJSJB662
GAME TYPE SLOW J B 6'6" (PE2) OVERHEAD
$529.00 1.98 / 6'6"
2 (BJ)
MAX 2.5
20GTJSJB664
GAME TYPE SLOW J B 6'6" (PE4) OVERHEAD
$529.00 1.98 / 6'6"
2 (BJ)
MAX 4
BLANK
BUTT ASSEMBLY
GUIDE
MAX 200
HI-POWER X / SPIRAL X CORE
SHIMANO CI4+ / SPLIT EVA
FUJI K STAINLESS SiC
MAX 330
HI-POWER X / SPIRAL X CORE
SHIMANO CI4+ / SPLIT EVA
FUJI K STAINLESS SiC
4
THREE PIECE TRAVEL MODELS
NEW PRODUCT RELEASE –2021–
ANGLERS TRAVELLING TO A DREAM FISHING DESTINATION OR PURSUING SALTWATER TROPHY SPECIES IN HARD TO GET PLACES REQUIRES DIFFICULT DECISIONS TO BE MADE WHEN SELECTING AN OUTFIT TO TRAVEL WITH DUE TO THE LENGTHS OF SW RODS. This is no longer an issue with Shimano’s new Grappler Travel series of 8’ and 8’2” 3-piece rods. Featuring 4 Type C casting specific models with a solid 3-piece construction for easy transportation and storage when you are on the move. The models range from a PE5 right through to a PE10 and feature the same premium Fuji componentry and spec as the existing Grappler series. Built on the exclusive Shimano Spiral X and Hi-Power X carbon wrapped blanks to provide superior casting performance and strength so you can take the fight to the fish.
Spiral X STRONGER FROM THE CORE Reducing blank twist and increasing the rods performance by strengthening the core.
RRP from $599 00 MODEL
DESCRIPTION
RRP
LENGTH (M/FT)
PIECES
LINE WT KG (LB)
LURE WT. G (OZ)
BLANK
BUTT ASSEMBLY
GUIDE
21GRPC3PS80M3
GRAPPLER TRAVEL TYPE C 8'0" MEDIUM SPIN
$599.00
2.44 / 8'
3
PE 5
MAX 100
HI-POWER X / SPIRAL X GRAPHITE
FUJI FULL LENGTH EVA
FUJI K Stainless SIC / FUJI Titanium SIC TIP
21GRPC3PS82MH3
GRAPPLER TRAVEL TYPE C 8'2" MEDIUM/HEAVY SPIN
$599.00
2.49 / 8'2"
3
PE 6
MAX 120
HI-POWER X / SPIRAL X GRAPHITE
FUJI FULL LENGTH EVA
FUJI K Stainless SIC / FUJI SIC TIP
21GRPC3PS82H3
GRAPPLER TRAVEL TYPE C 8'2" HEAVY SPIN
$599.00
2.49 / 8'2"
3
PE 8
MAX 150
HI-POWER X / SPIRAL X GRAPHITE
FUJI FULL LENGTH EVA
FUJI K Stainless SIC / FUJI Titanium SIC TIP
21GRPC3PS82XH3
GRAPPLER TRAVEL TYPE C 8'2" XXTRA HEAVY SPIN
$599.00
2.49 / 8'2"
3
PE 10
MAX 180
HI-POWER X / SPIRAL X GRAPHITE
FUJI FULL LENGTH EVA
FUJI K Stainless SIC / FUJI Titanium SIC TIP
10
PREMIUM SALTWATER JIGGING MODELS
NEW
THE NEW GRAPPLER BB SERIES FROM SHIMANO IS AN EXCITING AND AFFORDABLE SALTWATER SERIES THAT EXPANDS THE EXISTING GRAPPLER FAMILY. Featuring the premium Shimano and Fuji componentry you’d find in a high-priced rod, the Grappler BB series has you covered for all aspects of saltwater fishing including casting, jigging and slow jigging. Incorporating features such as Hi-Power X blank technology, Shimano custom seats and CI4 reel seats, as well as Fuji K Stainless Alconite guides. Shimano’s exclusive carbon wrapped Hi-Power X blank technology ensures blank twist and rotation is reduced when the rod is in motion, giving you increased casting performance, better fight control and a crisper feel when working your lures.
RRP from $319 00
Hi-Power X CARBON WRAPPED STRENGTH More robust and gives the rod an ideal curve
LINE LURE WT. WT G (OZ) KG (LB)
MODEL
DESCRIPTION
RRP
LENGTH (M/FT)
PIECES
21GRPBBJB603
GRAPPLER BB TYPE J 6'0" PE3 SPIN
$319.00
1.83 / 6'
2 (BJ)
PE 3
21GRPBBJS604
GRAPPLER BB TYPE J 6'0" PE4 SPIN
$319.00
1.83 / 6'
2 (BJ)
PE 4
21GRPBBJB605
GRAPPLER BB TYPE J 6'0 PE5 SPIN
$319.00
1.83 / 6'
2 (BJ)
21GRPBBJS566
GRAPPLER BB TYPE J 5'6" PE6 SPIN
$319.00 1.68 / 5'6
2 (BJ)
21GRPBBJS603
GRAPPLER BB TYPE J 6'0" PE3 OH
$319.00
1.83 / 6'
21GRPBBJS605
GRAPPLER BB TYPE J 6'0" PE5 OH
$319.00
1.83 / 6'
21GRPBBSJB662
GRAPPLER BB TYPE SLOW J 6'8" LIGHT OH
$319.00 2.03 / 6'8"
21GRPBBSJB663
GRAPPLER BB TYPE SLOW J 6'8" MED OH
21GRPBBLJB632
GRAPPLER BB TYPE LJ 6'3" MED SPIN
21GRPBBLJS632
GRAPPLER BB TYPE LJ 6'3" MED OVERHEAD
BLANK
BUTT ASSEMBLY
GUIDE
MAX 180
HI-POWER X
FUJI / FULL LENGTH EVA
FUJI SiC TIP / FUJI K ALCONITE
MAX 210
HI-POWER X
FUJI / FULL LENGTH EVA
FUJI SiC TIP / FUJI K ALCONITE
PE 5
MAX 250
HI-POWER X
FUJI / FULL LENGTH EVA
FUJI SiC TIP / FUJI K ALCONITE
PE 6
MAX 300
HI-POWER X
FUJI / FULL LENGTH EVA
FUJI SiC TIP / FUJI K ALCONITE
2 (BJ)
PE 3
MAX 180
HI-POWER X
FUJI / SPLIT BUTT EVA
FUJI SiC TIP / FUJI K ALCONITE
2 (BJ)
PE 5
MAX 250
HI-POWER X
FUJI / SPLIT BUTT EVA
FUJI SiC TIP / FUJI K ALCONITE
2 (BJ)
MAX PE 2 MAX 200
HI-POWER X
FUJI / SPLIT BUTT EVA
FUJI SiC TIP / FUJI K ALCONITE
$319.00 2.03 / 6'8"
2 (BJ)
MAX PE 3 MAX 330
HI-POWER X
FUJI / SPLIT BUTT EVA
FUJI SiC TIP / FUJI K ALCONITE
$319.00 1.91 / 6'3"
2 (BJ)
MAX PE 2 MAX 150
HI-POWER X
FUJI / SPLIT BUTT EVA
FUJI SiC TIP / FUJI K ALCONITE
$319.00 1.91 / 6'3"
2 (BJ)
MAX PE 2 MAX 160
HI-POWER X
FUJI / SPLIT BUTT EVA
FUJI SiC TIP / FUJI K ALCONITE
21GRPBBJS566
21GRPBBJS566
21GRPBBJS604
–2021–
21GRPBBJS604
PRODUCT RELEASE
4
LAND BASED SPIN MODELS
NEW
21CLTSBBS100H
PRODUCT RELEASE –2021–
COVER MORE WATER AND GET MORE OUT OF YOUR LURES WITH THE COLTSNIPER BB SERIES OF SHORE-BASED CASTING RODS. With four models across 9’6” and 10’ lengths, these rods are built on Hi-Power X blanks which are carbon wrapped for added strength and casting distance. The rods are rated between PE2 and PE4 with varying max casting weights from 60g to 100g, making this rod ideal for spinning and shore jigging scenarios.
RRP from $349 00
Hi-Power X CARBON WRAPPED STRENGTH More robust and gives the rod an ideal curve
MODEL
DESCRIPTION
RRP
LENGTH (M/FT)
PIECES
LINE WT KG (LB)
LURE WT. G (OZ)
BLANK
BUTT ASSEMBLY
GUIDE
21CLTSBBS100H
COLTSNIPER BB S 10'0" HEAVY SPIN
$349.00
3.04 / 10'
2
PE4
MAX100
HI POWER X
FULL LENGTH EVA
FUJI K ALCONITE
$349.00
3.04 / 10'
2
PE3
MAX80
HI POWER X
FULL LENGTH EVA
FUJI K ALCONITE
21CLTSBBS106MH COLTSNIPER BB S 10'6" MEDIUM HEAVY SPIN 21CLTSBBS96M
COLTSNIPER BB S 9'6" MEDIUM SPIN
$349.00
2.89 / 9'6"
2
PE2
MAX60
HI POWER X
FULL LENGTH EVA
FUJI K ALCONITE
21CLTSBBS96MH
COLTSNIPER BB S 9'6" MEDIUM HEAVY SPIN
$349.00
2.89 / 9'6"
2
PE3
MAX80
HI POWER X
FULL LENGTH EVA
FUJI K ALCONITE
3
SPECIALIST EGI MODELS
NEW PRODUCT RELEASE –2021–
THE POPULAR SEPHIA BB RANGE OF SQUID RODS ARE BACK AND NOW FEATURE SHIMANO’S CLASS LEADING HI POWER X BLANK CONSTRUCTION TO REDUCE BLANK TWIST AND PROVIDE A CRISP FEEL. Shimano’s Soft Tube Tip has been incorporated to provide a strong yet nimble tip to ensure consistent pressure is maintained on the barbs to keep you firmly connected during the fight. The two-piece construction makes it easily transportable and Fuji K guides have been fitted to provide tangle free casting and improved line delivery. The split EVA butt and Shimano reel seat components provide great grip and comfort.
RRP from $299 00
PAIR A SEPHIA BB REEL AND ROD TOGETHER FOR THE ULTIMATE EGI FISHING EXPERIENCE
MODEL
DESCRIPTION
RRP
LENGTH (M/FT)
PIECES
LINE WT KG (LB)
LURE WT. G (OZ)
BLANK
BUTT ASSEMBLY
GUIDE
SEPHIABBS86M
SEPHIA BB S 8'6" MEDIUM SPIN
$299.00
2.59 / 8'6
2
PE 0.5-1
2-4
HI POWER X / SOFT TUBE
SPLIT BUTT / EVA
FUJI K SILICON
SEPHIABBS89M
SEPHIA BB S 8'9" MEDIUM SPIN
$299.00
2.67 / 8'9
2
PE 0.5-1
2-4
HI POWER X / SOFT TUBE
SPLIT BUTT / EVA
FUJI K SILICON
$299.00
2.49 / 8'
2
PE 0.4-1
1.8 - 3.8
HI POWER X / SOFT TUBE
SPLIT BUTT / EVA
FUJI K SILICON
SEPHIABBS80ML SEPHIA BB S 8'0" MEDIUM LIGHT SPIN
4
LONG CAST MODELS
NEW PRODUCT RELEASE –2021–
THE HARD ROCKER BB IS A FAST-ACTIONED ROD RANGE WILL COVER EVERYTHING FROM SPINNING OFF THE ROCKS TO SHORE JIGGING. WITH 4 MODELS IN THE RANGE, FROM A PE1.2 – PE2, THERE’S A PERFECT ROD TO SUIT YOUR LIGHT ROCK AND SHORE-BASED ANGLING NEEDS. Built on a Hi-Power X carbon wrapped blank for strength and increased casting ability is aided by the Fuji K Alconite guides. All models are a two-piece construction which is perfect for packing up and taking out to your favourite landbased spot. There is medium light to heavy actions, with lure casting weights 5g to 40g depending on the model, so you can fish a great range of metals, hardbody and soft plastic lures.
RRP from $259 00
Hi-Power X CARBON WRAPPED STRENGTH More robust and gives the rod an ideal curve
MODEL
DESCRIPTION
RRP
LENGTH (M/FT)
PIECES
LINE WT KG (LB)
LURE WT. G (OZ)
BLANK
BUTT ASSEMBLY
GUIDE
HRDRCRBBS76ML
HARDROCKER BB S 7'6" MEDIUM LIGHT SPIN
$259.00
2.31 / 7'6
2
MAX PE1.2 (4-8lb)
5 - 20
HI POWER X
SPLIT BUTT / EVA
FUJI K STAINLESS ALCONITE
HRDRCRBBS83ML
HARDROCKER BB S 8'3" MEDIUM LIGHT SPIN
$259.00
2.51 / 8'3
2
MAX PE1.5 (4-10lb)
5 - 24
HI POWER X
SPLIT BUTT / EVA
FUJI K STAINLESS ALCONITE
HRDRCRBBS83MH
HARDROCKER BB S 8'3" MEDIUM HEAVY SPIN
$259.00
2.51 / 8'3
2
MAX PE1.5 (6-12lb)
8 - 32
HI POWER X
SPLIT BUTT / EVA
FUJI K STAINLESS ALCONITE
HRDRCRBBS86H
HARDROCKER BB S 8'6" HEAVY SPIN
$259.00
2.59 / 8'6
2
MAX PE2 (8-16lb)
10 - 40
HI POWER X
SPLIT BUTT / EVA
FUJI K STAINLESS ALCONITE
4
SALTWATER LURE MODELS
NEW PRODUCT RELEASE –2021–
THE SALTY ADVANCE RANGE OF RODS HAS BEEN PURPOSE BUILT FOR SPECIFIC STYLES OF LURE FISHING. WITH FOUR TECHNIQUE SPECIFIC RODS IN THE RANGE DESIGNED FOR ROCK, EGIING, TROUT AND BAKU BAKU STYLE JIG FISHING. Built with Shimano’s High Response Solid blank and Taftec rod tips, the Salty Advance rods are light, sharp and powerful. These quality materials are super sensitive, yet sturdy, rod tips will make for awesome lure fishing. At 8’3”, the Egi rod perfect for sending out long casts and sharp enough to work the jigs back effectively. The Rock Fish 7’6” model is light and powerful which is what you need when dealing with fish around the rocks. The Baku Baku rod has you covered for all things light jigging. With this slow jig style of fishing growing in popularity, this model will perfectly suit Shimano’s Baku Baku lure range, having you covered for everything from PE0.1 - PE2. The light spin Tairaba model features a light and sensitive blank, with a solid metal tip for heightened sensitivity. This model is well suited to such species as stream trout and light estuary. Built specific for each fishing style, these rods will feel great in your hand and perform when on the water.
RRP from $249 00
PIECES
LINE WT KG (LB)
LURE WT. G (OZ)
BLANK
BUTT ASSEMBLY
GUIDE
$249.00 2.51 / 8'3
2
PE 0.4-1
1.8 - 3.8
TAFTEC
SPLIT BUTT
FUJI K STAINLESS ALCONITE / SiC TIP
SALTY ADVANCE BAKU BAKU S 7'6" ULTRA LIGHT OVERHEAD
$249.00 2.31 / 7'6
2
PE 0.1-0.6 MAX 0.6 - 6
TAFTEC
FULL LENGTH EVA
FUJI K STAINLESS ALCONITE / SiC TIP
19SARCS76ML
SALTY ADVANCE ROCK FISH S 7'6" MEDIUM LIGHT SPIN
$249.00 2.31 / 7'6
2
MAX PE1.2 (4-8lb)
5 - 20
TAFTEC
SPLIT BUTT
FUJI K STAINLESS ALCONITE / SiC TIP
19SATRBB69MH
SALTY ADVANCE TAIRABA B 6'9" LIGHT/SOLID TIP SPIN
$249.00 2.06 / 6'9
2
MAX 1.5
45 - 200
TAFTEC
SPLIT BUTT
FUJI K STAINLESS ALCONITE / SiC TIP
MODEL
DESCRIPTION
19SAEG83ML
SALTY ADVANCE EGI S 8'3" MEDIUM LIGHT SPIN
19SAMBR76ULT
RRP
LENGTH (M/FT)
2021 NEW PRODUCT CATALOGUE (FIRST HALF)
facebook.com/Shimano.Fish
shimano.fish
youtube.com/ShimanoAustralia