BLUEWAVE INTELLIGENT ENERGY CONTROL
BLUE WAVE
FE ATURES ● 2 channel lighting controller
2-channel controller from Chalmor BlueWave is a remarkably versatile 2-channel controller that provides a costeffective solution to many lighting and HVAC control applications based on combinations of occupancy sensing, light levels and run on timers with optional manual switches in one or two zones.
Flexibility is a key feature of BlueWave, enabling a wide range of configurations to suit the control requirements of each project. Ease of use is assured by simple integrated push buttons and meaningful LED displays that clearly show the control status. Each channel can be used to detect occupancy and/or light levels with the ability to connect up to six occupancy sensors to each BlueWave controller. The channels can operate independently of each other, providing a wide range of configurations within one zone or across two zones. These are just some examples of the configurations that can be easily achieved with BlueWave:
Sports Hall Wall Mounted PIRs x 6 Lights x 15
● Two stages of light level within a single zone ● Occupancy and light levels in a single zone
BLUE INTELLIGENT ENERGY CONTROL
● Two run-back timers
Lights on
CHANNEL
1 OVERRIDE
OVERRIDE
OFF
Key Override
ON
CHANNEL
2
Office with 2 zones Plant Room
Zone 1 Light controlled on occupancy and light level
● Independent light level control for 2 zones ● Suitable for internal and external lighting applications ● Low cost flexible controller ● Qualifies for Carbon Trust Enhanced Capital Allowance scheme Presence or Absence BlueWave can be configured to operate with presence detection (lights come on automatically when someone enters the space) or demand-based absence detection (lights may be switched on manually and will be turned off automatically when no presence is detected for the set period). The light level control may also be set to prevent lights coming on in bright conditions. BlueWave occupancy sensors employ new BlueWave infra-red technologies to provide precise movement detection. BlueWave occupancy and light level sensors as well as manual switch wiring is all extra low voltage (SELV) which makes for simple installation.
● Occupancy and light levels across two zones ● Occupancy and timed delay
● Occupancy control for 2 zones
BlueWave sensors are also available with dual-detection technologies, combining passive infra-red (PIR) and microwave detection.
Ceiling PIRs x 4
Lights x 9
Zone 2 Light controlled on occupancy only
Lights x 12
Chalmor
Machinery BLUE INTELLIGENT ENERGY CONTROL
BLUE INTELLIGENT ENERGY CONTROL
CHANNEL
1 CHANNEL
1 OVERRIDE
OVERRIDE
OFF
ON
CHANNEL
2
2 Switches
OVERRIDE
OVERRIDE
OFF
ON
CHANNEL
2
Duplicate switches by both doors – but only one BlueWave
Flashing Beacon
Sounder
Experts in Energy Saving Lighting and Heating
Chalmor Limited, Unit 4, Albert Road Industrial Estate, Luton, Bedfordshire LU1 3QF Tel: 01582 748700 Fax: 01582 748748 email: info@chalmor.co.uk www.chalmor.co.uk