Outdoor Outdoor Rigid Light L-ELR6K2
Outdoor Rigid Light
L-ELR6K2
LEDs Line Hi IP67
LEDs Line Hi IP67
LEDs Line Hi IP67 | L-ELR6K2
1
Outdoor Rigid Light
L-ELR6K2
LEDs Line Hi IP67 Linear light with UV protected semi diffused polycarbonate cover
Application
Ideal for directing light on lines on the outside wall.
FACADE
Sapporo PARCO Location: JAPAN
1
L-ELR6K2 | LEDs Line Hi IP67
HOTEL BAR GRANTiOS Location: JAPAN Architect office: Plus F
Pacific Royal Court Minato Mirai Location: JAPAN
Outdoor Outdoor Rigid Light L-ELR6K2
MADE IN JAPAN
LEDs Line Hi IP67 IP67 linear lighting LEDs Line Hi meet IP67 so that can be used as in a harsh environment such as under steps in a landscape area.
UV protected, semi diffused LED Also, ideal for exposed line light on the outside wall. By applying ultraviolet deterioration prevention paint on the surface of LEDs Line Hi, it can be installed in places where direct sunlight strikes it. Semi diffused cover is maintaining high luminance for easy recognition when seeing it from a distance. However, if you look at it from a distance far, it looks like a single continuous line.
12 kinds of length variation 120 mm increments, min.140mm and max. 1460 mm can be used for complicated shape installation.
Max. connectable length is 6.9 m Recommended where the power supply installation location and the light fixture location are apart from each other.
4 Color variations
Easy dimming with 24 VDC low voltage power supply Dimmable by any signal such as 0 - 10 V, DMX, DALI, etc, if you use an adaptive dimming driver, with simple wiring. Ideal for dimming the whole in synchronization. Although it is unsuitable for design that requires individual control.
High efficiency LED, 100 lm/W Achieved 7.7 W/m, 780 lm/m and 101.3 lm/W using Nichia high efficiency LED package.
4000K, 3500K, 3000K, 2700K
Advanced waterproofing function design IP67 connector (Japanese brand) Heatproof fluororesin cable covered with weather resistance cover Cylindrical extruded polycarbonate semi-diffused cover Three step protection structure - Double polycarbonate end cap - Encapsulated by silicon around cable and polycarbonate end cap - Silicon O ring for cable
Comparison of the distance from wall 0mm
50mm
100mm
200mm
300mm
LEDs Line Hi IP67
 mm
L-ELR6K2 | LEDs Line Hi IP67
2
LEDs Line Hi IP67 Linear light with UV protected semi diffused polycarbonate cover Model No.
Light distribution curve -reference-
＊
L - ELR6K2 - 014 026 038 050 062 074
＊ M - 24
＊
Length code 086 098 110 122 134 146
Lead wire
Light source color
J : Both ends lead wire E : One end lead wire
40 : 4000K 35 : 3500K 30 : 3000K 27 : 2700K
245 cd Width direction Longitudinal direction 140°(Longitudinal direction 100°)
Specification 050 L-ELR6K2-050J＊M-24 L-ELR6K2-050E＊M-24 3.9W/500mm 500mm 49g(J) / 47g(E) 100.0 lm/W
Length code Model No.
Both ends lead wire One end lead wire
Power consumption Lamp fitting length (L) Weight Luminaire efficacy (2700K)
146 L-ELR6K2-146J＊M-24 L-ELR6K2-146E＊M-24 11.6W/1460mm 1460mm 135g(J) / 133g(E) 100.9 lm/W
○ = Device inventory * = Equivalent
Light source color
40 35 30 27
098 L-ELR6K2-098J＊M-24 L-ELR6K2-098E＊M-24 7.7W/980mm 980mm 83g(J) / 81g(E) 101.3 lm/W
○ ○ ○ ○
4000K 3500K 3000K 2700K
○ ○ ○ ○
420 lm 410 lm 400 lm 390 lm
○ ○ ○ ○
840 lm 830 lm 800 lm 780 lm
1270 lm 1240 lm 1200 lm 1170 lm
Contact us about 5000K since they are made-to-order and have a Minimum Order Quantity.
Size Variation Length code Power consumption Lamp fitting length (L)
014 1.0W 140mm
026 2.0W 260mm
038 2.9W 380mm
062 4.8W 620mm
074 5.8W 740mm
086 6.8W 860mm
110 8.7W 1100mm
122 9.6W 1220mm
134 10.6W 1340mm
Spec may be subject to change without announcement. The optical data provided on the each product pages are for reference only; the data values are not guaranteed. Please use as reference materials for your planning.
External dimensions
Environment
In & Outdoors (no condensation) IP67
Max. sets connectable
6.9m
Ambient temperature / humidity
-5～50°C 25～95%RH（no condensation）
Storage temperature / humidity
-25～55°C 25～85%RH（no condensation）
Material (body)
Polycarbonate
Attachments
Mounting clip
Option parts
Mounting clip, Power supply cable, Joint cable
Dimmable
○
Required
COO
Japan
Front view
Cross section view
25.8
100
L±3
One end lead wire Front view
Cross section view
7 25.8
100
L±3
Max. connectable length per power supply LEDs Line Hi IP67 * = for multiple systems Power supply
Normal operation
〜 4.4m
〜 8.8m*
〜 13.2m*
50W switching power supply 100W switching power supply 150W switching power supply
Prohibited installation places: - water directly fall on or pooled - liquids including chroline or chemicals fall on - high temperature and high humidity such as saunas and public bath - coastal areas which are affected by sea spray
Caution: Do not cut the lead wire of outdoor product at a job site. Please do appropriate treatment for the lead wire and connector of the terminal of outdoor LED fixture.
3
14.6
100
13.8
Power Supplies
Both ends lead wire
L-ELR6K2 | LEDs Line Hi IP67
13.8
DC24V
7
Input voltage
7
General Specification
14.6
Outdoor Outdoor Rigid Light
Optional parts Mounting clip for LEDs Line Hi IP67 Model No : ELR2-F
Attachment
Option Parts
L-ELR6K2
Top view
10
Attachment
2 pcs for 140mm to 380mm 3 pcs for 500mm to 860mm 5 pcs for 980mm to 1460mm
14.4
Used for installing the light appliance.
23.8
3.2
φ
Option Parts
8 23.8
Side view
Power supply cable EPYJ *mm
14.4
2 pcs/1 bag
Option Parts
Required
*(Length:mm)
500
1000
2000
4000
Model No.
EPYJ220-305-K
EPYJ220-310-K
EPYJ220-320-K
EPYJ220-340-K
Top view
4.3
(+ side)
(40)
Sid e view
7
4.6
Front view
20
L
16.5
6.7
Check the label on the DC + side for polarity.
Joint cable EEJJ *mm
Option Parts
*(Length:mm)
500
1000
2000
4000
6000
Model No.
EEJJ220-305
EEJJ220-310
EEJJ220-320
EEJJ220-340
EEJJ220-360
7
Top view
Side view
7
4.6
Front view
25.8
L
16.5
6.7
LEDs Line Hi IP67
LEDs Line Hi IP67 | L-ELR6K2
4
Installing the product Connector （Power source side）
Mounting screw lamp Mounting clip
Connector （Feed side） LED LED
the protective paper of the double-sided tape
Insert until it is locked Screw hole of 4.2mm in diameter Fix the clip between the two LEDs
Remove the protective paper of the double-sided tape and temporarily fix the lamp to the installation site.
Attachment
Option Parts
Mounting clip for LEDs Line Hi IP67 (ELR2-F)
Join the connectors. Make sure that they are correctly joined. Use the one side connector product (L-ELR6K2-xxxE*M-24) for the end of connection.
Fix the lamp on the installation site with the attached Mounting clips and screws (round head screw M3.1 x 16).
Cautions
Cautions
Not suitable to be fixed with a double-sided tape or adhesive. Do not use the double-sided tape except for fixing the lamp temporarily.
Do not cut off the connectors to use them. The waterproof performance will be lost. In order to avoid the exposure to direct sunlight, hide the connectors behind the lamp, etc.
Cautions ¥ Make sure that the installation site is flat. ¥ Before the construction, make sure to remove from the installation site any oil content, water drop, dust and so on. ¥ When installing the product downward or in a vertical direction, pay full attention in order to avoid dislocation, damage due to a fall and so on. ¥ Do not scratch or incise the lead wire. The waterproof performance will be lost. ¥ Make sure to insert the connector until it is completely locked. Otherwise it can lead to the lowering of the waterproof performance and contact failure.
Minimum size for construction Please keep the following size in order to avoid the temperature increase of the lamp. Any size that is smaller than the following may shorten the lamp's life.
Over 30
Sealed (the size is the same for both upward and downward)
Over 50
Sideways
Over 100
Over 40 Over 50
Under 35
Cove lighting
Over 40
Under 30
※ unit of measure=mm
5
L-ELR6K2 | LEDs Line Hi IP67
Outdoor Outdoor Rigid Light
Connecting to the power supply ■Cables used for connecting LED fixtures and Power supply must be a suitable type and gauge. Option Parts
Required
ower supply cable EPYJ P 500mm, 1000mm, 2000mm, 4000mm (EPYJ220-305-K, EPYJ220-310-K, EPYJ220-320-K, EPYJ220-340-K)
L-ELR6K2
■Cables should be joined with suitable terminal block or methods as appropriate to the installation and operating environment. Caution: When using a long cable with thin dimension, the resistance of cable will increase. Voltage drop and heat dispatching may occur and result in brightness decreasing. Caution: When separating one cable to multiple circuits in the same gauge, the current loading focuses on the junction of the branch circuit and high temperature will liberate on there.Please consider the loading of the power supply (quantity of LED fixture) and review the wiring system to avoid the above problem.
AC input side → with connector
■When connecting the dimmer driver with power supply, unpredicted noise might occur. It is a characteristic of electronic devices, not a malfunction of the LED fixture. Please choose an appropriate power supply and consider a place to install. Reducing the loading factor of LED fixture might improve the noise from the power supply while the noise for the LED fixtures might be improved by splitting the circuit of LED fixtures into multiple.
P Ｓ * ** ** ** **
I ED AM
C SO LE 直 流 S 安 LP 入 定 AF 力 化 ** A： 電 F* C 源 **- *** 出 - 力 ** 05 D： V* 6- C * 0 ** ** zH V AV .* コ A* ー セ ル 株 式 会
社
NA PA JN
Ｅ
power supply → DC output side (Connected to LED fixture)
System configuration diagram ■ Max. connectable length depends on the wattage of the power supply. ■ Max. length per circuit of LEDs Line Hi IP67 is 6.9m. If it exceeds 6.9 m, please split into multiple circuits.
Up to 4m
■ Max. distance from the power supply to the end of LED fixture is 10.9 m.
Max. connectable length per power supply Length of LED fixture
Power supply
LED fixture max. 6.9m Circuit 1
Power supply
DC24V
Circuit 2
(70% loading factor)
Circuit 3
*=for multiple system ∼4.4m
50W power supply
∼8.8m*
100W power supply
Power supply cable EPYJ 500mm, 1000mm, 2000mm, 4000mm
∼13.2m*
150W power supply
(EPYJ220-305-K, EPYJ220-310-K, EPYJ220-320-K, EPYJ220-340-K)
Option Parts
Required
LEDs Line Hi IP67
LEDs Line Hi IP67 | L-ELR6K2
6
Singapore World HQ 52A Tanjong Pagar Road, Singapore 088473
Tel: +65-6291-2410
Hong Kong Marketing Office Room 1801, 18/F, Kwai Hung Holdings Centre, 89 King's Road, North Point, Hong Kong
Dubai Marketing Office 5WA 331, DAFZA, Dubai, United Arab Emirates
General Inquiry E-mail: info@luci.co.jp
7
L-ELR6K2 | LEDs Line Hi IP67
2017.6
Tel: +971-54-446-0350
Tel: +852-2219-8462