Redesigned luminaire to go beyond the limit of the minimum size
Product story
Add new beauty to your design
Luci, a leading company in the simple and minimum design of lighting, is releasing a new linear light series. With the small size as a feature, the series will give new values in design.
New challenges of design
To break down the standards we have created in the past and rewrite them to new standards.
This is the concept of the RIMiT series.
Exceeds the expectations
“ Do something interesting and new. ”
Those feedbacks motivate us to develop new products. We want to meet and exceed these expectations!
Homogeneous linear light with a height of 5.8mm only 60 different length variations with a short lead time
Homogeneous linear light with a height of 5.8mm only
point point 1 2
Seamless joint and uniform surface illumination
5.8mm
Luci RIMit us
14mm
Luci silux K
Light diffuses gently from a wide angle distribution
60 different length variations with a short lead time
point point point 3 4 5
finish with different types of mounting accessories
Recommended applications
RIMiT series is highly versatile and blends in with spaces in various applications.
scene
scene
Surface flush fit with mirror thickness to PSU Fixed with clip t=2mm
2 3 Mirror edge Step
edge to PSU
Hidden underneath the steps
Tread: solid wood t=30mm
Fixed with double sided tape t=1mm
Kamenoi Hotel Izukogen (former: JP Resort Izukogen) / Lighting design: sola associates / Photo: Yasuyuki Akiba
Tokyo Bay Shiomi Prince Hotel / Architect office: Kume Sekkei Co., Ltd. / Lighting design: Noosa Design Co.Ltd / Construction: Fujita Corporation / Photo: Yasuyuki Akiba
shelf
HIROMURA DESIGN OFFICE
design : Studio Akane Monyama / Photo: Nacása & Partners Inc.
6
Back lit of shelf board
Light diffuses gently even at a close distance
MCM ginza HAUS 1 / Architect: Office Hiyoshizaka / Photograph: DAICI ANO
Kanazawa Tokyu Hotel / Owner
TOKYU HOTELS CO.,LTD. / Architect office: ILYA Corporation / Lighiting Design: sola associates / Construction: Tokyu Construction Co.,Ltd. / Photo:Nacása & Partners Inc.
Shelf board: melamine finish
LRMUS-T
- Only 5.8mm thickness with dot-free light emitting surface
- Custom lengths available in every 25mm increment, up to 1508mm
- Selectable between both and one side cable feed, open end or connector
Model No. (Open end)
LRMUS -T
LRMUS
Luci RIMiT
Luci RIMiT Indoor / W Both ends lead wire, Open end
Luci RIMiT Indoor / W Both ends lead wire, (C) Connector
Luci RIMiT Indoor / S Both
Luci RIMiT
Option parts
Mounting clip for RIMiT us Model No : LRMUS-PT-A
For magnet installation, please refer the required number of clip to the table on P.8
Lift Parts for RIMiT Model No : LRM-PT-B 2 pcs/1 bag
Lift parts must be used with mounting clip
For magnet installation, please refer the required number of clip to the table on P.8
supply
No : LFP-AT15
Installing the product
Mounting clip installation
Mounting clip for RIMiT us (LRMUS-PT-A)
Recommended screw: flat head screw M3
Mounting clips are designed to hold the luminaire in place by spreading both sides. Please leave at least 2mm of gap on both sides for maintenance.
Installing magnet to the mounting clip
Magnet installation
Mounting clip and Lift Parts installation
Lift parts must be used with mounting clip
Mounting clip for RIMiT us (LRMUS-PT-A)
Lift Parts for RIMiT (LRM-PT-B)
Recommended screw: flat head screw M3
Please make sure to flush the flat head of screws with the surface of the mounting parts. Otherwise, the lighting fixture may not be completely hooked and fall off.
Mounting clip for RIMiT us (LRMUS-PT-A)
Washer Plate
Magnet
Countersunk screw M3 (included)
Recommended position of clip and magnet
Magnet Set A (MG-A)
Mounting clip for RIMiT us (LRMUS-PT-A)
(Example) or or
Mounting clip for RIMiT us (LRMUS-PT-A)
Recommended mounting position (pitch: 20mm to 300mm, quantity: 2 to 5 pieces) depends on the length of the luminaire. Please refer to the attached table on p.8
Recommended position of magnetic tape and double-sided tape
Magnetic tape (LRM-MT5)
Double-sided tape (LFP-AT15)
Magnet Set A (MG-A)
(Example)
① Max. connectable total length of LED fixture per power supply depends on capacity of power supply. Recommended loading factor: 70% (without dimming) or 60% (with dimming) ② If connectable length of
Illuminance data
Direct horizontal surface light intensity distribution chart
LRMUS-T1008 -N-DF-I-6 1/2 illuminance angle
Light source color 5000K
Brightness 139 cd
Luminous flux 465 lm Color rendering index Ra 92
LRMUS-T1008 -W-DF-I-6
Light source color 4000K
Brightness 136 cd
Luminous flux 460 lm Color rendering index Ra 91
LRMUS-T1008 -WW-DF-I-6
Light source color 3500K
Brightness 131 cd
Luminous flux 442 lm
Color rendering index Ra 93
LRMUS-T1008 -L30-DF-I-6
Light source color 3000K
Brightness 121 cd Luminous flux 405 lm Color rendering index Ra 92
Square-shaped homogeneous linear light with a height of 7.4mm only
60 different length variations
Square-shaped homogeneous linear light with a height of 7.4mm only
point point 1 2
Adjustable light distribution
60 different length variations
Light diffuses gently from a wide angle distribution
point point point 3 4 5
Wide variation of mounting options
Recommended applications
Luci RIMiT series is highly versatile and blends in with spaces in various applications.
Step light
scene 1 2 Wall (Recessed)
Light fitting can be rotated after installing with mounting clips to adjust the light distribution
Seamless recessed installation with mounting clip D as it has the same width as light fitting
Seamless recessed installation with mounting clip D as it has the same width as light fitting
Light fitting can be rotated after installing with mounting clips to adjust the light distribution
Lift clips can be used for hiding the connector behind the light fitting
LRMKK-T
- Compact 7.4 mm square cross-sectional size - Custom lengths available in every 25mm increment, up to 1508mm - Selectable between both and one side cable feed, open end or connector
Model No. (Open end)
Luci RIMiT kk
Luci
Luci RIMiT
(C) Connector
Luci RIMiT kk
Luci RIMiT
Mounting clip for RIMiT kk
Model No : LRMKK-PT-C
Lift Parts for RIMiT
Model No : LRM-PT-B 2 pcs/1 bag
Lift parts must be used with mounting clip
For magnet installation, please refer the required number of clip to the table on P.8
clip D for RIMiT
Power supply cable 5M
Model No : CAD-5000-MEFE-O
Magnetic tape for RIMiT 5m
Model No : LRM-MT5 5 m
Double sided tape 15m
Model No : LFP-AT15
Width: 10mm
Installing the product
Mounting clip installation
Mounting clip for RIMiT kk
（LRMKK-PT-C）
Recommended screw: flat head screw M3
Mounting clips are designed to hold the luminaire in place by spreading both sides. Please leave at least 2mm of gap on both sides for maintenance.
Mounting clip and Lift Parts installation
Lift parts must be used with mounting clip
Mounting clip for RIMiT kk （LRMKK-PT-C）
Lift Parts for RIMiT （LRM-PT-B）
Recommended screw: flat head screw M3
Please make sure to flush the flat head of screws with the surface of the mounting parts. Otherwise, the lighting fixture may not be completely hooked and fall off.
Mounting clip D installation
※ Install lighting vertically or not want clip to be visible
Mounting clip D for RIMiT （LRM-PT-D）
Recommended screw: flat head screw M3
Please make sure to flush the flat head of screws with the surface of the mounting parts. Otherwise, the lighting fixture may not be completely hooked and fall off.
Recommended position of clip and magnet
Mounting clip D and Lift Parts installation
Mounting clip for RIMiT kk （LRMKK-PT-C）
Lift parts must be used with mounting clip D
Mounting clip D for RIMiT （LRM-PT-D） Lift Parts for RIMiT （LRM-PT-B）
Recommended screw: flat head screw M3
Mounting clip D for RIMiT （LRM-PT-D）
Recommended mounting position (pitch: 20mm to 300mm, quantity: 2 to 5 pieces) depends on the length of the luminaire. Please refer to the attached table on p.8
Recommended position of magnetic tape and double-sided tape
Magnetic tape for RIMiT 5m （LRM-MT5）
or or
Double sided tape 15m （LFP-AT15）
System configuration diagram
① Max. connectable total length of LED fixture per power supply depends on capacity of power supply. Recommended loading factor: 70% (without dimming) or 60% (with dimming)
Illuminance data
Max. connectable length of LED
② If connectable length of LED fixture per circuit exceeds the maximum, please split into multiple circuit.
Direct horizontal surface light intensity distribution chart
LRMKK-T1008［］ - N- DF - I- 6
Light source color 5000K
Brightness 105 cd
Luminous flux 394 lm
Color rendering index Ra 94
LRMKK-T1008［］ - W- DF - I- 6
Light source color 4000K
Brightness 101 cd
Luminous flux 380 lm
Color rendering index Ra 92
LRMKK-T1008［］ - WW- DF - I- 6
Light source color 3500K
Brightness 94 cd
Luminous flux 351 lm
Color rendering index Ra 94
LRMKK-T1008［］ - L30- DF - I- 6
Light source color 3000K
Brightness 91 cd
Luminous flux 341 lm
Color rendering index Ra 92
LRMKK-T1008［］ - L27- DF - I- 6
Light source color 2700K
Brightness 89 cd
Luminous flux 334 lm
Color rendering index Ra 92
Light source color 2400K
Brightness 82 cd
Luminous flux 306 lm
Color rendering index Ra 91
③ To avoid voltage drop, please consider the max. distance from power supply to the end of LED fixture. (i.e. total cable length plus LED fixture length)
New application lighting that fits into an inner or outer corner.
60 different length variations with a shorter lead time.
1
point point
Dotless light fixture with 2 sided luminescence that is perfect for entrance and exit corners.
2
Diagonal light distribution efficiently illuminates the entire room
Luci silux K
60 different length variations with a shorter lead time
Light diffuses gently from a wide angle distribution
point point point 3 4 5
Wide variation of mounting options
Mounting clip F for RIMiT
Mounting clip E for RIMiT
Recommended applications
Luci RIMiT series is highly versatile and blends in with spaces in various applications.
scene
Corner ceiling
Efficiently illuminates space with two-sided luminescence. Possible to create the illusion that the entrance corner is glowing.
Corner wall
Stylish entry-corner line lighting with mounting clips that are concealed in the fixture
scene
3
illuminate both sides of a prertruding corner
scene
4 Corner Showcase
scene
5 Ceiling cove
Cut-off line in cove lighting is less likely to appear allowing light to spread softly from both side of the luminescence.
When using one-sided luminescence
Visible cut-off line
When using RIMiT sm 2 sided luminescence
Softer spread of light making cut-off line not so visible
RIMiT
LRMSM-T
- New application lighting that fits into a corner - Expands the range of design with two-sided luminescence - Available in 60 sizes from 33mm to 1508mm with shorter delivery time
Model No. (Open end)
LRMSM
Luci RIMiT sm -Custom
Luci RIMiT sm Indoor / W Both ends lead wire, Open end
Luci RIMiT sm Indoor / W Both ends lead wire, (C) Connector
Luci RIMiT sm Indoor / S Both
lead wire, Open end
Luci RIMiT sm Indoor / S
(C) Connector
Cross sectional view when installing optional items
Mounting clip E for RIMiT Model No : LRM-PT-E
For
Installing the product
Mounting clip E installation
Mounting clip E for RIMiT (LRM-PT-E)
Recommended screw: flat head screw M3
Mounting clips are designed to hold the luminaire in place by spreading both sides. Please leave at least 2mm of gap on both sides for maintenance.
Mounting clip F installation
※ Install lighting vertically or not want clip to be visible
Mounting clip F for RIMiT (LRM-PT-F)
Recommended screw: flat head screw M3
Please make sure to flush the flat head of screws with the surface of the mounting parts. Otherwise, the lighting fixture may not be completely hooked and fall off.
Recommended position of clip and magnet
Mounting clip E and Lift Parts installation
Lift parts must be used with Mounting clip E
Mounting clip E for RIMiT (LRM-PT-E)
Lift Parts for RIMiT (LRM-PT-B)
Recommended screw: flat head screw M3
Please make sure to flush the flat head of screws with the surface of the mounting parts. Otherwise, the lighting fixture may not be completely hooked and fall off.
Mounting clip F and Lift Parts installation
Lift parts must be used with Mounting clip F
Mounting clip F for RIMiT (LRM-PT-F)
Lift Parts for RIMiT (LRM-PT-B)
Recommended screw: flat head screw M3
Mounting clip E and Magnet installation
Installation
Mounting clip E for RIMiT (LRM-PT-E)
Mounting clip E for RIMiT (LRM-PT-E)
Mounting clip F for RIMiT (LRM-PT-F)
Recommended mounting position (pitch: 20mm to 300mm, quantity: 2 to 5 pieces) depends on the length of the luminaire. Please refer to the attached table on p.8
Recommended position of magnetic tape and double-sided tape
Magnetic tape for RIMiT 5m (LRM-MT5)
Double sided tape 15m ( LFP-AT15)
① Max. connectable total length of LED fixture per power supply depends on capacity of power supply.
Recommended loading factor: 70% (without dimming) or 60% (with dimming) ② If connectable length of LED fixture per circuit exceeds the maximum, please split into multiple circuit.
Illuminance data
Direct horizontal surface light intensity distribution chart
5000K
87
Ra 92
4000K
88
523 lm
rendering index Ra 92 Light source color 3500K
Brightness 83cd Luminous flux 480 lm
Color rendering index Ra 92
Light source color 3000K
Brightness 75 cd Luminous flux 449 lm
Color rendering index Ra 91
Light source color 2700K
Brightness 74 cd
Luminous flux 446 lm
Color rendering index Ra 91
Light source color 2400K
Brightness 70 cd
Luminous flux 418 lm
Color rendering index Ra 92
Round dotless light fixture with 8.8mm diameter
60 different length variations
1
point point
Round dotless light with 8.8mm diameter
2
Seamless joint and uniform surface illumination
60 different length variations
4
Circular shape allows a soft and wide light distribution
point point point 3
5
Different mounting accessories with clean finish
Mounting clip D for RIMiT
Mounting clip G for RIMiT mr
Recommended applications
Luci RIMiT mr offers a soft, circular light in a compact design with a diameter of 8.8mm
Scan here to download detailed installation drawing
Ceiling pendant
8.8mm diameter pendant lighting. Eye-catching even in mid-air. Slim pendant accents that fit under the shelves for great design. scene scene
Pendant shelf
Pendant Specifications：Releasing in Jan 2024
Pendant Specifications：Releasing in Jan 2024
scene 3 Coffered ceiling
Beautiful gradation of light due to circular light fixture.
Point
Mounting clip for RIMiT mr that can freely change the light distribution by turning the light fixture 360° after installation
scene 4 Under shelving
Round
scene 5 Recessed wall
LRMMR-T
- Round dotless lines with 8.8mm diameter
- Mounting clips that allow light distribution to be freely changed 360° after installation - 33mm to 1508mm, 60 sizes available
Model No. (Open end)
Model No. (Connector)
General Specification
Input
Environment Indoors (no condensation)
Material (body) Polycarbonate, Aluminum
Luci RIMiT us
Luci RIMiT
Luci
Luci RIMiT
Luci
A
:
Used for installing LED fixture with Mounting clip G on metal plate. Metal plate is required by installer.
Power supply cable 5M Model No : CAD-5000-MEFE-O
Mounting clip G installation
Lighting can be freely oriented for (360°) installation
Mounting clip G for RIMiT mr (LRMMR-PT-G)
Recommended screw:
head screw M3
Mounting clips are designed to hold the luminaire in place by spreading both sides. Please leave at least 2mm of gap on both sides for maintenance.
Please make sure to flush the flat head of screws with the surface of the mounting parts. Otherwise, the lighting fixture may not be completely hooked and fall off.
Mounting clip D installation
Install lighting vertically or not want clip to be visible
Lighting and clip must be same as direction in screw driven
Mounting clip D for RIMiT (LRM-PT-D)
Recommended screw: Flat head screw M3
Please make sure to flush the flat head of screws with the surface of the mounting parts. Otherwise, the lighting fixture may not be completely hooked and fall off.
Mounting clip F installation
Install lighting 45°or vertically or not want clip to be visible
Lighting and clip must be 45°direction only
Mounting clip F for RIMiT (LRM-PT-F)
Recommended screw: Flat head screw M3
Direction
Please make sure to flush the flat head of screws with the surface of the mounting parts. Otherwise, the lighting fixture may not be completely hooked and fall off.
Recommended position of clip and magnet
Mounting clip G for RIMiT mr (LRMMR-PT-G)
Mounting clip D for RIMiT (LRM-PT-D)
Mounting clip G and Lift Parts installation
Mounting clip G for RIMiT mr (LRMMR-PT-G)
Lift Parts for RIMiT (LRM-PT-B)
Recommended screw:
Lift parts must be used with Mounting clip
Mounting clip G and Magnet installation
Magnet Installation
Mounting clip G for RIMiT mr (LRMMR-PT-G)
Mounting clip D and Magnet installation
Mounting clip D for RIMiT (LRM-PT-D)
Lift Parts for RIMiT (LRM-PT-B)
Recommended screw:
M3*15
Mounting clip F and Magnet installation
Lift Parts for RIMiT (LRM-PT-B) Magnet Set A (MG-A) Magnet
Mounting clip F for RIMiT (LRM-PT-F)
Recommended screw:
Mounting clip F for RIMiT (LRM-PT-F)
Recommended mounting position (pitch: 20mm to 300mm, quantity: 2 to 5 pieces) depends on the length of the luminaire. Please refer to the attached table on p.8
System configuration diagram
① Max. connectable total length of LED fixture per power supply depends on capacity of power supply. Recommended loading factor: 70% (without dimming) or 60% (with dimming)
Illuminance data
Max. connectable length of
② If connectable length of LED fixture per circuit exceeds the maximum, please split into multiple circuit.
Direct horizontal surface light intensity distribution chart
LRMMR-T1008［］ - N- DF - I- 6
Light source color 5000K
Brightness 106 cd
Luminous flux 540 lm
Color rendering index Ra 91
LRMMR-T1008［］ - W- DF - I- 6
Light source color 4000K
Brightness 109 cd
Luminous flux 558 lm
Color rendering index Ra 92
LRMMR-T1008［］ - WW- DF - I- 6
Light source color 3500K
Brightness 101 cd
Luminous flux 512 lm
Color rendering index Ra 92
LRMMR-T1008［］ - L30- DF - I- 6
Light source color 3000K
Brightness 93 cd
Luminous flux 480 lm
Color rendering index Ra 91
LRMMR-T1008［］ - L27- DF - I- 6
Light source color 2700K
Brightness 93 cd
Luminous flux 473 lm
Color rendering index Ra 92
LRMMR-T1008［］ - L24- DF - I- 6
Light source color 2400K
Brightness 88 cd
Luminous flux 447 lm
Color rendering index Ra 91
③ To avoid voltage drop, please consider the max. distance from power supply to the end of LED fixture. (i.e. total cable length plus LED fixture length)
New Projects
Dot-free linear light with a height of only 5.8mm
Midosuji
Location： Osaka, Japan
Architect office: WAILEA
8.8mm diameter, round dotless light fixture
Location：Japan
Architect Office: SAZABY LEAGUE,Ltd.
Luci RIMiT us 3500K
Luci RIMiT mr 3000K
WAILEA
CAMPER Kashiwa Takashimaya Station Mall
P.3
Square-shaped homogeneous linear light with a height of 7.4mm only
