Outdoor Outdoor Rigid Light L-ELA6K2
Outdoor Rigid Light
L-ELA6K2
Power LEDs Line IP65
Power LEDs Line IP65
Power LEDs Line IP65 | L-ELA6K2
1
Outdoor Rigid Light
L-ELA6K2
Power LEDs Line IP65 Small dimention lighting with extrusion lens for grazing effect for outdoor
Application
Balcony and building facade which placed from where does not get direct sunshine
Facade
Bathroom
The Prince Gallery Tokyo Kioicho Location: JAPAN Architect office: Nikken Sekkei Ltd Interior design: Rockwell Group, Europe Lighting design: Lighting Planners Associates Construction: KAJIMA CORPORATION / TEKKEN CORPORATION / Kumagai Gumi Co.,Ltd. Consortium Photo: TOSHIO KANEKO
1
L-ELA6K2 | Power LEDs Line IP65
Jaipur City Palace Location: India Lighting design: Design Matrix
EMPIRE Prestige Causeway Bay Location: Hong Kong Client: Asia Standard Hotel Group Ltd. Interior Design: atelier ikebuchi
Outdoor Outdoor Rigid Light L-ELA6K2
MADE IN JAPAN
Power LEDs Line IP65 2 types of beam angle by extrude lens transverse direction 35° 60° ×
longitudinal direction 120°
12 kinds of length variation 120 mm increments, min.125mm and max. 1445 mm can be used for complicated shape of facade.
Max. connectable length is 9 m
Because of 120°light distribution, the scallop does not come out, even if the distance from the wall is less than 50mm. 35°type is suitable for grazing effect, 60°type is for wider effect. Highly recommended to use 150mm from the wall, in order to spread the light smoothly.
Recommended where the power supply installation location and the light fixture location are apart from each other.
4 Color variations
Easy dimming with 24 VDC low voltage power supply Dimmable by any signal such as 0 - 10 V, DMX, DALI, etc, if you use an adaptive dimming driver, with simple wiring. Ideal for dimming the whole in synchronization. Although it is unsuitable for design that requires individual control.
High efficiency LED Achieved 19.8 W/m, 1600 lm/m and 79 lm/W using Nichia high efficiency LED package.
4000K, 3500K, 3000K, 2700K
Advanced waterproofing function design IP67 connector Heatproof fluororesin cable covered with weather resistance cover Line part : Encapsulated by silicon between aluminum heatsink and extrusion lens End part : Encapsulated by silicon around cable, end cap and silicon bush for cable Polycarbonate protection cover covered by steel wire
Lifted mounting clip for preventing invasion of rain water
Comparison of the distance from wall 0mm
50mm
100mm
200mm
300mm
L：60°× 120°
Power LEDs Line IP65
＊ mm
N：35°× 120°
＊ mm
Power LEDs Line IP65 | L-ELA6K2
2
Power LEDs Line IP65 Small dimention lighting with extrusion lens for grazing effect for outdoor Model No.
Light distribution curve -reference-
＊
＊
＊
＊
Length code
Lead wire
Light source color
Beam angle
J : Both ends lead wire E : One end lead wire
40 : 4000K 35 : 3500K 30 : 3000K 27 : 2700K
L：60°× 120° N：35°× 120°
L - ELA6K2 - 012 024 036 048 060 072
084 096 108 120 132 144
- 24C - P Width direction
530 cd
Longitudinal direction 60°(Longitudinal direction 120°)
Specification Length code Model No.
Both ends lead wire One end lead wire
Power consumption Lamp fitting length (L) Weight Luminaire efficacy (2700K)
096 L-ELA6K2-096J＊＊-24C-P L-ELA6K2-096E＊＊-24C-P 19.2W/965mm 965mm 360g(J) / 341g(E) 79.2 lm/W
144 L-ELA6K2-144J＊＊-24C-P L-ELA6K2-144E＊＊-24C-P 28.8W/1445mm 1445mm 530g(J) / 504g(E) 78.8 lm/W
○ = Device inventory * = Equivalent
Light source color
40 35 30 27
048 L-ELA6K2-048J＊＊-24C-P L-ELA6K2-048E＊＊-24C-P 9.6W/485mm 485mm 190g(J) / 178g(E) 79.2 lm/W ○ ○ ○ ○
4000K 3500K 3000K 2700K
○ ○ ○ ○
820 lm 800 lm 770 lm 760 lm
○ ○ ○ ○
1640 lm 1610 lm 1550 lm 1520 lm
2460 lm 2410 lm 2320 lm 2270 lm
Contact us about 5000K since they are made-to-order and have a Minimum Order Quantity.
Size Variation Length code Power consumption Lamp fitting length (L)
012 2.4W 125mm
024 4.8 245mm
036 7.2W 365mm
060 12.0W 605mm
072 14.4W 725mm
084 16.8W 845mm
108 21.6W 1085mm
120 24.0W 1205mm
132 26.4W 1325mm
Spec may be subject to change without announcement. The optical data provided on the each product pages are for reference only; the data values are not guaranteed. Please use as reference materials for your planning.
External dimensions
Environment
In & Outdoors (no condensation) IP65
Max. sets connectable
9m
Ambient temperature / humidity
-5～40°C 25～95%RH（no condensation）
Storage temperature / humidity
-15～55°C 25～85%RH（no condensation）
Material (body)
Aluminium, Polycarbonate
Attachments
-
Option parts
End clip, Power supply cable, Joint cable
Dimmable
○
Power Supplies
Required
COO
Japan
Cross section view
4
φ 100
L±3
100
35
14.2
4
φ 36
Normal operation
Power supply
〜 1.7m
50W switching power supply 100W switching power supply 150W switching power supply
100
L±3
Prohibited installation places: - water directly fall on or pooled - the sunlight directly shines on - liquids including chroline or chemicals fall on - high temperature and high humidity such as saunas and public bath - coastal areas which are affected by sea spray Do not cut the lead wire of outdoor product at a job site. Please do appropriate treatment for the lead wire and connector of the terminal of outdoor LED fixture.
L-ELA6K2 | Power LEDs Line IP65
22
Cross section view
Caution:
3
26
One end lead wire Front view
Power LEDs Line IP65
〜 5.2m
Front view
36
Max. connectable length per power supply
〜 3.5m
Both ends lead wire
35
DC24V
13
Input voltage
14.2
General Specification
22
Outdoor Outdoor Rigid Light
Optional parts End clip
Option Parts
Model No : ELA1-P-FE 2 pcs/1 bag
4.2
10
φ
23
33
L-ELA6K2
For vertical installation or installing in a place with strong wind and rain.
Top view
front view
side view
23
40
40
Power supply cable EPYC *mm
Option Parts
Required
*(Length:mm)
500
1000
2000
4000
Model No.
EPYC220-805-K
EPYC220-810-K
EPYC220-820-K
EPYC220-840-K
Top view
4.3
(+ side)
Front view Sid e view
13
6.6
40
20
L
26
14
Check the label on the DC + side for polarity. Joint cable EECC *mm
Option Parts
*(Length:mm)
500
1000
2000
4000
6000
Model No.
EECC220-805
EECC220-810
EECC220-820
EECC220-840
EECC220-860
6.6
16
Top view
Side view
13
14.2
Front view
36
L
26
14
Power LEDs Line IP65
Power LEDs Line IP65 | L-ELA6K2
4
Installing the product Mounting screw
Mounting screw (round head screw M3.1 x 16)
Power source side Feed side
Mounting clip (installed, slidable) 35 mm
29 mm
Screw hole of 4.2mm in diameter
Screw hole of 4.2mm in diameter Attachment
Option parts:End clip (ELA1-P-FE) Join the connectors. Make sure that they are correctly joined. Use the one side connector product (L-ELA6K2-*E**-24C-P) for the end of connection.
Option Parts
End clip (ELA1-P-FE) Please attach End clip additionally in order to install in a place with strong wind and rain , and to prevent misalignment of mounting position.
Cautions
Fix the lamp on the installation site with the attached Mounting screws (round head screw M3.1 x 16).
Not suitable to be fixed with a double-sided tape or adhesive.
Cautions Do not cut off the connectors to use them. The waterproof performance will be lost. In order to avoid the exposure to direct sunlight, hide the connectors behind the lamp, etc.
Cautions ¥ Make sure that the installation site is flat. ¥ Before the construction, make sure to remove from the installation site any oil content, water drop, dust and so on. ¥ When installing the product downward or in a vertical direction, pay full attention in order to avoid dislocation, damage due to a fall and so on. ¥ Do not scratch or incise the lead wire. The waterproof performance will be lost. ¥ Make sure to insert the connector until it is completely locked. Otherwise it can lead to the lowering of the waterproof performance and contact failure. ¥ Do not remove the spring for fixing the protective cover. Even on the LED, shading of the light is hardly caused.
Minimum size for construction Please keep the following size in order to avoid the temperature increase of the lamp. Any size that is smaller than the following may shorten the lamp’s life. Sealed (the size is the same for both upward and downward)
Under 30
Over 45
L-ELA6K2 | Power LEDs Line IP65
Over 50
Under 45
Under 120
Over 45
5
Sideways
Over 50
Over 50
Cornice lighting
Over 100
Cove lighting
Over 50
※ unit of measure=mm
Outdoor Outdoor Rigid Light
Connecting to the power supply ■Cables used for connecting LED fixtures and Power supply must be a suitable type and gauge.
Option Parts
L-ELA6K2
■Cables should be joined with suitable terminal block or methods as appropriate to the installation and operating environment. Caution: When using a long cable with thin dimension, the resistance of cable will increase. Voltage drop and heat dispatching may occur and result in brightness decreasing. Caution: When separating one cable to multiple circuits in the same gauge, the current loading focuses on the junction of the branch circuit and high temperature will liberate on there.Please consider the loading of the power supply (quantity of LED fixture) and review the wiring system to avoid the above problem.
Required
ower supply cable EPYC P 500mm, 1000mm, 2000mm, 4000mm
AC input side →
(EPYC220-805-K, EPYC220-810-K, EPYC220-820-K, EPYC220-840-K) with connector
■When connecting the dimmer driver with power supply, unpredicted noise might occur. It is a characteristic of electronic devices, not a malfunction of the LED fixture. Please choose an appropriate power supply and consider a place to install. Reducing the loading factor of LED fixture might improve the noise from the power supply while the noise for the LED fixtures might be improved by splitting the circuit of LED fixtures into multiple.
P Ｓ * ** ** ** **
C SO LE 直 流 S 安 LP 入 定 AF 力 化 ** A： 電 F* C 源 *- ** 出 * *-* 力 * 05 D： V* 6- C * 0 ** ** zH V AV .* コ A* ー セ ル 株 式 会 社
NA PA JN I ED
Ｅ
AM
power supply → DC output side (Connected to LED fixture)
System configuration diagram ■ Max. connectable length depends on the wattage of the power supply. ■ Max. length per circuit of Power LEDs Line IP65 is 9 m. If it exceeds 9 m, please split into multiple circuits.
Up to 3.2m
■ Max. distance from the power supply to the end of LED fixture is 12.2 m.
Max. connectable length per power supply Length of LED fixture
Power supply
(70% loading factor)
LED fixture less than 9m
Power supply
Circuit 1
DC24V
Option Parts
Required
Power supply cable EPYC 500mm, 1000mm, 2000mm, 4000mm ∼1.7m
50W power supply
∼3.5m
100W power supply
∼5.2m
150W power supply
(EPYC220-805-K, EPYC220-810-K, EPYC220-820-K, EPYC220-840-K)
Power LEDs Line IP65
Power LEDs Line IP65 | L-ELA6K2
6
Singapore World HQ 52A Tanjong Pagar Road, Singapore 088473
Tel: +65-6291-2410
Hong Kong Marketing Office Room 1801, 18/F, Kwai Hung Holdings Centre, 89 King's Road, North Point, Hong Kong
Dubai Marketing Office 5WA 331, DAFZA, Dubai, United Arab Emirates
General Inquiry E-mail: info@luci.co.jp
7
L-ELA6K2 | Power LEDs Line IP65
2017.6
Tel: +971-54-446-0350
Tel: +852-2219-8462