Tiflex catalogue 2013 by Solid Media Group Denmark A/S

screenprinting m aterial

LC CARROUSEL - print on tee-shirts, sweat-shirts, caps, ....

SCREEN PRINTING

* making an impression

LC CARROUSEL

SCREEN PRINTING

The LC carrousel is a manual machine dedicated to print 1 to 6 colours on teeshirts, sweat-shirts, caps... The maximum printing size is 40 x 50 cm. 3 models are manufactured : 4 screens / 4 boards, 6 screens / 6 boards or 6 screens / 4 boards. LC carrousel is composed of a perfectly stable stiff base. The boards and screen holders are rotating independently one from the other. LC carrousel can be equipped with 4 different board sizes : large, man, woman and child. LC carrousel is delivered dismantled. â&#x20AC;˘ Printing system The screen holders are manufactured in mechanic welding section which offers good lightness/stiffness qualities for an easy use. The boards slide to permit their adjustment and quick removing. A roll tappet set them in the appropriate position. â&#x20AC;˘ Adjustments - screens by 3 micrometric buttons (x and y axes and rotation) - boards : front / backward - off contact - parallelism screen/board

4 moving stations

6 moving stations

4/6 moving stations

number of screens :

maxi printing size :

40 x 50 cm

screen maxi outside dimensions :

60 x 80 cm

number of boards :

boards dimensions - large : - man : - woman : - child :

48 x 66 cm 40 x 60 cm 32 x 50 cm 22 x 40 cm

board height on ground :

86 cm

lift screen height on ground :

1,60 m

LC CARROUSEL Mechanical characteristics

Overall dimensions

maxi outside diameter :

2,90 m

net weight :

180 kg

200 kg

190 kg

gross weight :

220 kg

240 kg

230 kg

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

Equipment manufactured in France

screenprinting m aterial

FLASH CURE

- intermediate dryer for textile inks

SCREEN PRINTING

* making an impression

FLASH CURE

SCREEN PRINTING

FLASH CURE is an intermediate dryer preheater for textile inks. Equipped with short waves infrared transmitters, it is composed of a heating element and a base. It is available in 2 pre-drying formats : 40 x 40 and 40 x 60 cm. • THE HEATING UNIT Depending on the format, it combines several 2 Kw lamps. The start of each cycle is controlled by a contact rod which detects the board under the machine head. A first timer sets precisely the drying time. An air jet cools down the mesh at the end of each cycle. A second timer sets this cooling time. The FLASH CURE heating unit is designed exclusively for intermittent operation.

• BASE It is easily adjustable in height. It is equipped with 4 wheels to facilitate its positioning above the carrousel. For the treatment of fragile meshes, FLASH CURE is equipped with a half-power programming and with a cooling during the heating time. This unit is one of the strongest in this kind of equipment. It is manufactured in compliance with the NFC 20-30 directive. Flash can be adapted on automatic MHM carrousels. In that configuration, it is supplied with 2 sliding bars .

Mechanical characteristics maxi drying surface :

40 x 40 cm

40 x 60 cm

100 x 55 x 86 cm 100 x 55 x 121 cm

120 x 55 x 89 cm 120 x 55 x 123 cm

net weight :

35 kg

40 kg

gross weight (open crate) :

85 kg

90 kg

6 short waves lamps

9 short waves lamps

12 Kw (6 x 2 Kw)

18 Kw (9 x 2 Kw)

feeding :

380 V tri

intensity :

18 A

27 A

air filtening 40 µ

40 x 40 cm

40 x 60 cm

Outside dimensions overall dimensions - mini p x l x h : - maxi :

Electrical characteristics heating : total power :

feeding : OPTION sliding bars for automatic carrousel:

Product manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

Pneumatics characteristics

SCREENPRINTING MATERIAL

I.R. DRYING TUNNEL - dedicated to polymerise water based and plastisol inks used in textile industry

SCREEN PRINTING

* making an impression

I.R. DRYING TUNNEL

SCREEN PRINTING

Infrared drying tunnel is dedicated to polymerise water based and plastisol inks used in the textile industry. It can also be used for solvent based inks (époxy, polyuréthanne, glycéro...) printed on IR resisting surfaces (thermo hardening, metals...). This equipment is manufactured in the following standard widths : 80, 120 and 140 cm but other sizes can be manufactured on request. • Working process Polymerisation is obtained with radiant transmitters action on the printed surface. • Characteristics - under equipment length: 2,60 m - teflon glass conveyor resisting to heat (250°C) - variable conveyor speed from 0.4 to 6.5 m/mn (please, consult us for other reduction ratios) - parallelism and conveyor tension adjustments, stopping collar guiding - collapsible shutters allowing thick support passage such as caps - drying area, controlled by a switch and guided by a temperature regulator with digital display - fumes collector on the drying tunnel exit(125 mm diameter) - metal frame with 4 wheels ensuring an easy moving

On request and after study, we can supply combined drying tunnel composed of jet air element, infrared element and cooling section. I.R. DRYING TUNNEL

IR 80

IR 120

IR 140

80 cm

120 cm

140 cm

90 x 12 cm

130 x 12 cm

150 x 12 cm

86,5 cm

overall width

120 cm

160 cm

180 cm

under element length

260 cm

overall length

420 cm

overall height

130 cm

54 and 34 cm

net weight

365 kg

460 kg

550 kg

gross weight

460 kg

600 kg

660 kg

MECHANICAL CHARACTERISTICS useful width opening from ground conveyor height OVERALL DIMENSIONS

exit and entry useful length

feeding

400 V tri

12 A

19 A

23 A

conveyor speed

0,4 to 6,5 m/mn

operating sound level

80 decibels max.

3-phase intensity 400 V

Product manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

ELECTRICAL CHARACTERISTICS 12 radiant elements 18 radiant elements 21 radiant elements heating 600 W 600 W 600 W total power 7,5 kW 11 kW 13 kW

SCREENPRINTING MATERIAL

short IR dryer - dedicated to polymerise water based and plastisol inks used in textile industry

SCREEN PRINTING

* making an impression

SHORT IR DRYER

SCREEN PRINTING

Infrared drying tunnel is dedicated to polymerise water based and plastisol inks used in the textile industry. It can also be used for solvent based inks (époxy, polyuréthanne, glycéro...) printed on IR resisting surfaces (thermo hardening, metals...). The main characteristic of this tunnel is its reduced length. • Working process Polymerisation is obtained with radiant transmitters action on the printed surface. • Characteristics - under equipment length : 1,30 m - teflon glass conveyor resisting to heat (250°C) - variable conveyor speed from 0.4 to 6.5 m/mn (please, consult us for other reduction ratios) - parallelism and conveyor tension adjustments, stopping collar guiding - collapsible shutters allowing thick support passage such as caps - drying area, controlled by a switch and guided by a temperature regulator with digital display - fumes collector on the drying tunnel exit (125 mm diameter) - metal frame with 4 wheels ensuring an easy moving

On request and after study, we can supply combined drying tunnel composed of jet air element, infrared element and cooling section. short IR dryer

IR 80

MECHANICAL CHARACTERISTICS useful width

80 cm

opening

90 x 12 cm

from ground conveyor height

86,5 cm

OVERALL DIMENSIONS overall width

120 cm

under element length

130 cm

overall length

290 cm

overall height

130 cm

exit and entry useful length

54 and 34 cm

net weight

265 kg

gross weight

360 kg

ELECTRICAL CHARACTERISTICS heating

6 radiant elements 750 W

total power

4,6 kW

feeding

400 V tri 7A

conveyor speed

0,4 to 6,5 m/mn

operating sound level

80 decibels max. Product manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

3-phase intensity 400 V

SCREEN PRINTING MATERIAL

HLS - this semi-automatic machine enables the printing on plane supports up to 3cm thickness.

SCREEN PRINTING

* making an impression

HLS

SCREEN PRINTING

Squeegee precise adjustment and slant visualisation.

This semi-automatic machine enables the printing on plane supports up to 3cm thickness.

Squeegee and flood bar pneumatic clamping.

Tipping over of the printing head in order to case the squeegee and flood bar setting and removing operations.

Screen pneumatic clamping (clamping preserved in case of air or electrical cuts).

not rocked rocked

Screen lift-off visualisation with restart. Micrometric adjustment and pressure visualisation of the squeegee and flood bar in order to balance the efforts on the left and right ends. Robust frame welded mechanic.

Fast adjustment of both squeegee and flood bar by a micro contact.

Management of the functions machine by programmable automat.

Electrical regulation of except contact given by vertical displacement of the table. Great accessibility of all these adjustments, soft and quiet operation.

Control console apart from the frame.

Micro plate of impression perforated, honeycomb, out of aluminium resistant to all types of inks and solvents. The HLS can be transformed into 3/4 automatic if it is equipped with the option retractable blocks for exit of sheets on the left or on the right.

HLS

SCREEN PRINTING

HLS

570 S

710 S

812 S

1014 S

50 x 70 cm

70 x 100 cm

80 x 120 cm

100 x 140 cm

96 x 100 x 5 cm

120 x 130 x 5 cm

130 x 150 x 5 cm

150 x 170 x 5 cm

16 cm AV/20 cm AR

18 cm AV/22 cm AR

80 x 100 cm

110 x 130 cm

120 x 150 cm

140 x 170 cm

Mechanical characteristics maxi printing size : screen maxi outside dimensions : mini front and back margins : printing plate dimensions : perforated surface :

54 x 74 cm

84 x 106 cm

94 x 126 cm

114 x 146 cm

item maxi thickness :

3 cm

maxi number of cyles/hour sur format maxi :

900

560

500

400

supplied squeegees length :

53 & 73 cm

83 & 103 cm

83 & 123 cm

83 & 143 cm

supplied flood bar length :

54 & 74 cm

84 & 104 cm

84 & 124 cm

84 & 144 cm

90 / 96 cm

106 x 123 cm

141 x 161 cm

152 x 193 cm

176 x 225 cm

136 x 133 x 138 cm

170 x 174 x 138 cm

183 x 208 x 138 cm

212 x 240 x 138 cm

net weight :

500 kg

600 kg

660 kg

760 kg

gross weight (wooden box) :

620 kg

760 kg

880 kg

1000 kg

0,37 kW 1500 t/mn 230/400 V 0,55 kW 1500 t/mn 230/400 V 0,37 kW 2850 t/mn 230/400 V

0,75 kW 1500 t/mn 230/400 V 0,75 kW 1500 t/mn 230/400 V 1,5 kW 2850 t/mn 230/400 V

1,5 kW

2,5 kW

4 x 1,5 mm²

Parts and labour garanteed, HLS is supplied with an electrical treadle, two sets of squeegees, scraper blades and the directions for use.

Overall dimensions plate height on ground : dimensions on ground p x l : overall dimensions p x l x h without console :

Electrical characteristics variable speed scraping engine : 3-phase for the up and down mvt engine : 3-phase vacuum engine : power : feeding cable section :

Pneumatic characteristics pression :

6 bars

output :

0,20 m³/h

80 décibels maxi

operating sound level :

Equipment manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013

Sound characteristics

screenprinting m aterial

sheet feed - it carries out the automatic transfer of the support printed between the machine of i pression HLS and tunnels U.V or A.P.

SCREEN PRINTING

* making an impression

SHEET FEED

SCREEN PRINTING

The take off system transfers the printed substrate automatically between the HLS printing machine and the UV or AP tunnels. It takes the sheets on the HLS, thanks to a pair of pliers. It is coupled electrically and mechanically to the HLS. It is installed to the right or left of the HLS. The latter is therefore equipped with the feed guide and ejector option. There are two versions of this system: SF 80 for the HLS 570 and 710 and SF 120 for the HLS 812 and 1014. The take off system conforms to the CEE 89/392 standard. Parts and labour are fully guaranteed for 6 months.

Sheet feed

SF 80

SF 120

800 cm

1 200 cm

25 m/mn

1050 x 750 mm

1 150 x 1 500 mm

minimum margin on jogging side

20 mm

maximum thickness of sheet for printing

10 mm

3 kg

780 cycles/hour

500 cycles/hour

185 x 103 x 115 cm

235 x 143 x 115 cm

net weight

135 kg

175 kg

gross weight (crate)

195 kg

245 kg

air pressure

6 bars

air consumption

3 m続/h

3,5 m続/h

three phase 230/400 V 50 Hz 95 W

Mechanical features belt width maximum belt speed maximum dimensions of sheet for printing

maximum weight of sheet for printing maximum theoretical rate (cycle start pedal locked) Dimensions overall dimensions ( l x h x d)

Electrical features belt motor roller

Product manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

Pneumatic features

SCREENPRINTING MATERIAL

MO 255 - for printing on flat items included between 0 and 40 cm thick and in a maximum format of 25 x 50 cm - of modern an flexible design, and it complies with European standard in force.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

TECHNOLOGICAL

INDUSTRIAL

SOLUTIONS

This semi-automatic machine for printing on flat items included between 0 and 40 cm thick is of modern and flexible design, and it complies with European standard in force. It prints in a maximum format of 25 x 50 cm. • pneumatic clamping of the squeegee and the flood bar

• pneumatic clamping of the frame (maintained this in the event of air or electrical failure) • precise adjustment and display of squeegee’s pressure

MO 255

SCREEN PRINTING

•

precise adjustment and display of squeegee’s angle

•

electrical adjustment of the off contact given by the vertical travel of the table

• moving print table, with or without vacuum grooved tray, revolving tray... (consult us)

•

control panel separated from the frame

•

smooth and silent operation

MO 255

SCREEN PRINTING

Parts and labour are warrented on the MO 255. It is supplied with an electrical pedal, a squeegee and bottom knife set, and a user manual. Mechanical characteristics nominal printing format :

25 x 50 cm

item thickness :

0 to 40 cm

maximum external dimensions of screen :

50 x 70 cm

minimum left and right garages :

4,5 and 6,5 cm

minimum / maximum tray height to the floor :

70 - 110 cm

length of the scraper supplied :

30 cm

“out of contact” :

from 0 to 2 cm

dimensions of the table :

40 x 60 cm

OVERALL DIMENSIONS overall dimensions d x w x h (without panel) :

141 x 115 x 156 cm

net weight :

325 kg

gross weight (crate) :

420 kg

Electrical characteristics supply voltage :

230 V single phase

output :

200 W

mains power cord cross-sectional area :

3 G 1,5 mm²

pressure :

6 bars

flow rate :

5 m³ / h

Sound characteristics Operating sound level :

80 decibels max. Equipment manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

Pneumatic characteristics

SCREENPRINTING MATERIAL

MO 406 - for printing on flat items included between 0 and 40 cm thick and in a maximum format of 40 x 60 cm - of modern an flexible design, and it complies with European standard in force.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

MO 406

This semi-automatic machine for flat items printing, of thickness between 0 and 40 cm, has a flexible, modern design, in compliance with applicable European standards. It prints up to a max. format of 40 x 60 cm. • pneumatic clamping of the squeegee and flood bar

• pneumatic clamping of the frame (clamping maintained in the event of air or electricity failure) • accurate setting and display of the squeegee pressure

• accurate setting and display of the squeegee’s angle • electrical setting of the off-contact given by the vertical displacement of the table • moving print table, with or without vacuum grooved tray, revolving table, etc... (please contact us)

• control panel separate from the frame • smooth, silent operation

MO 406

SCREEN PRINTING

Parts and labour are warrented on the MO 406. It is delivered with an electric foot pedal, a set of squeegee and scrapper blade and user’s manual. Mechanical characteristics nominal print format :

40 x 60 cm

screen max. outer dimensions :

60 x 85 cm

min. left and right garages :

6 cm

max. part thickness :

40 cm

length of squeegee supplied :

42 cm

“off-contact” :

from 0 to 2 cm

table dimensions :

60 x 70 cm

OVERALL DIMENSIONS overall dimensions d x w x h (without panel) :

182 x 170 x 161 cm

net weight :

620 kg

gross weight (crate) :

800 kg

Electrical characteristics power supply voltage :

230 V single phase

installed power :

600 W

cross-section of mains cable :

3 G 1,5 mm²

Pneumatic characteristics pressure :

6 bars 5 m³ / h

Sound characteristics sound level during operation :

80 decibels max.

Equipment manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

rate :

screenprinting m aterial

ultra violet drying tunnel - teflon glass antistatic belt resisting to heat - conveyor speed from 10 to 40 m/mn - speed controlled by digital display - equiped with a separate cooling unit: tube and printed substrate.

SCREEN PRINTING

* making an impression

ULTRA VIOLET DRYING TUNNEL

SCREEN PRINTING

The ultra violet drying tunnel is dedicated to dry rapidly U.V. inks. This equipment is manufactured in 4 standard widths : 80, 100, and 120 cm. • Working process Printed materials are conveyed by a conveyor at a higher speed than 10 m/mn, and are exposed to the radiance of a U.V. ray tube which dries them by polymerisation in a spit second. • Characteristics - tubes lineic power : 120 W/cm (300 W/inch) - possible tubes low power working (2 positions 100 % and 50 % of the lineic power) - teflon glass antistatic conveyor resisting to heat (250°C) - conveyor speed variation (from 10 to 40 m/mn) - speed controlled by a digital display - separate cooling of the tubes and printed materials - on request, it is possible to add an extra cooling element - this tunnel does not need a constant control : any functionning failure leads to the tube stop and activates a sound warning. Exceptional by its design and its power, the UV drying tunnel is also appreciated for its easy use.

U.V. DRYING TUNNEL

100

120

Mechanical caractéristics drying maxi width :

80 cm

100 cm

120 cm

conveyor width :

80 cm

100 cm

120 cm

opening maxi width :

88 cm

108 cm

128 cm

ventilation diameter :

Ø 12,5 cm

Overall dimensions overall width :

130 cm

150 cm

170 cm

overall length :

276 cm

entry or exit element length :

90 cm

overall height :

132 cm

conveyor standard distance from floor :

90 cm

net weight :

450 kg

500 kg

gross weight (on a wooden base) :

550 kg

600 kg

650 kg

52 kW

63 kW

80 kW

75 A

90 A

115 A

4 x 10 mm²

550 kg

total needed power when starting : 380 V intensity on 2 live wires when starting : feeding cables section 400 V :

Product manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

Electrical caracteristics

screenprinting m aterial

jet air drying tunnel - stable and resistant teflon-glass blanket - electronic speed from 0,1 to 15 m/mn - parallelism and belt conveyor tension adjustments - temperature regulation controlled by thermostat - easy access to control panel - large pipes (200 mm) to exhaust solvent fumes

SCREEN PRINTING

* making an impression

JET AIR DRYING TUNNEL

SCREEN PRINTING

This material is manufactured in 3 standard widths, from 80 cm to 120 cm opening. On request, we can manufacture other sizes. • Modular design The modular design with two elements of 2 m length, allows the realization of an evolutive assembly, adapted to the users' requirements. Each element is controlled separately by the console situated inside the entry element. Our standard model (1) is composed of one entry, one heating element, one cooling element and of one exit. Additional heating, cooling and UV or IR element can be easily added to this unit.

Sheet feed

SF 80

SF 120

800 cm

1 200 cm

25 m/mn

1050 x 750 mm

1150 x 1500 mm

minimum margin on jogging side

20 mm

maximum thickness of sheet for printing

10 mm

3 kg

780 cycles/hour

500 cycles/hour

185 x 103 x 115 cm

235 x 143 x 115 cm

net weight

135 kg

175 kg

gross weight (crate)

195 kg

245 kg

air pressure

6 bars

air consumption

3 m³/h

3,5 m³/h

three phase 230/400 V 50 Hz 95 W

Mechanical features belt width maximum belt speed maximum dimensions of sheet for printing

maximum weight of sheet for printing maximum theoretical rate (cycle start pedal locked) standard unit

unit

cold

hot

entry

• Working process Drying is obtained by the action of hot air jets on printed materials. Each element contains a powerful turbine which ensures the quick air circulation. In the heating element, air is heated when passing on reinforced resistances. It is then recycled in order to realize energy savings and the appropriate setting on the conveyor of the thinnest sheets. Each element is equipped with an extracting turbine. • Characteristics - stable and resistant teflon-glass blanket - electronic speed variation from 0,1 to 15 m/mn (please consult us for other reduction ratios) - parallelism and belt conveyor tension adjustments - temperature regulation controlled by thermostat - easy access to main switch and emergency knobs - large diameter ducts (200 mm) to exhaust solvent fumes Thanks to its strong construction, its meticulous thermal insulation, its soundless functioning, this JA drying tunnel is a particularly homogeneous and efficient equipment in compliance with the current requirements of hygiene and energy savings.

Dimensions overall dimensions (l x h x d)

Pneumatic features

Electrical features belt motor roller

Product manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

The jet air drying tunnel is mainly used to accelerate the drying of solvent based inks printed on papers, cartons, PVC, plastics in sheets, wood and metal panels.

screenprinting m aterial

drying racks - stiff and monobloc frame - equipment rests on four rubber wheels - plated racks for easy counting

SCREEN PRINTING

* making an impression

DRYING RACKS

SCREEN PRINTING

The stiff and monobloc frame is manufactured with welded iron profiles. This equipment rests on four rubber pivoting wheels with a double row of balls for an easy movement even when it is full loaded. The racks are made of welded iron thread protected by zinc plating. An original design of the guides provides a perfect locking which avoids lapping and twisting of the shelves. Two return springs allow the stand in up-right position of each rack. The 2cm interval which separates them in the lower position has been studied to obtain a better air circulation, and consequently a better drying. Furthermore, allied with the rack rigidity, that interval eliminates any risk of blotting with the last printed item when the next rack is loaded. For oven drying, we offer in the same sizes, 70 x 100 and 85 x 125 cm, trolleys mounted with wast iron wheels. They exist with 31, 52 or 60 racks.

drying racks

70 x 100

85 x 125

70 x 100 cm 9 x 18 cm

85 x 125 cm 9 x 18 cm

1,6 cm

164 cm 230 cm

164 cm 245 cm

room temperature

dimensions :

75 x 108 x 170 cm

90 x 132 x 170 cm

net weight :

150 kg

200 kg

gross weight (open crate) :

190 kg

240 kg

Characteristics maxi useful size : mini useful size : interval between 2 racks : number of racks : height of the last rack horizontal : upper position : maxi drying temperature : Overall dimensions

trolleys On request, we offer special trolleys and drying racks : • 5 cm spacing (30 racks maxi, for items of maxi thickness 4,1 cm) • 7,5 cm spacing (20 racks maxi, for items of maxi thickness 6,6 cm) • number of racks on demand, within the limits indicated hereunder : - 60 for a standard rack or trolley - 30 for a standard rack or trolley with 5 cm spacing - 20 for a standard rack or trolley with 7,5 cm spacing.

Our drying racks and trolleys are delivered fully assembled and ready to use.

Characteristics maxi useful size : 70 x 100 cm 9 x 18 cm mini useful size : interval between 1,6 cm 2 racks : 31 number of racks : height of the last rack 95,2 cm - horizontal : 159 cm - upper position : maxi drying 200°C temperature :

85 x 125 cm 9 x 18 cm

70 x 100 cm 9 x 18 cm

85 x 125 cm 9 x 18 cm

70 x 100 cm 9 x 18 cm

85 x 125 cm 9 x 18 cm

1,6 cm

95,2 cm 173 cm

146,2 cm 210 cm

146,2 cm 225 cm

164 cm 230 cm

164 cm 245 cm

200°C

Overall dimensions dimensions net weight : gross weight (open crate) :

75 x 108 x 97 cm

90 x 132 x 97 cm 75 x 108 x 152 cm 90 x 132 x 152 cm 75 x 108 x 164 cm 90 x132 x 164 cm

120 kg

160 kg

140 kg

190 kg

150 kg

200 kg

160 kg

200 kg

180 kg

230 kg

190 kg

240 kg

Product manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

Our drying racks feature 60 racks of 70 x 100 or 85 x 125 cm and offer the advantage of minimum overall floor dimensions.

screenprinting m aterial

RH MACHINE - pneumatic clamping of the screen, squeegee and flood bar - perfectly flat perforated honeycomb aluminium plate - automatic or manual vacuum control - transversal and longitudinal table adjustment

SCREEN PRINTING

* making an impression

RH MACHINE

SCREEN PRINTING

The RH machine (horizontal screen lifting) prints all flat surfaces manually: paper, cardboard, self-adhesives, sheet plastic materials, wood and metal panels etc… up to a thickness of 8 cm. Its doctor blade provides regular, high-quality printing whilst reducing the operator’s physical effort. It is supplied with a doctor blade suitable for maximum print format.

26 cm

2012

3012

maximum print format

200 x 120 cm

300 x 120 cm

screen max. outside dimensions

280 x 180 cm

380 x 180 cm

garage (width)

25 cm

garage (height)

15 cm

dimensions of the table

300 x 164 cm

400 x 164 cm

suction surface

200 x 120 cm

300 x 120 cm

longitudinal

± 15 mm

transverse

± 15 mm

Mechanical characteristics

Micrometric adjustments 75 cm

Measurements height of table

90 cm

height of squeege/doctor blade handle

112 cm

overall length

346 cm

446 cm

max. depth

290 cm

max. height

200 cm

top clearance

75 cm

bottom clearance

26 cm

net weight

900 kg

1 000 kg

gross weight

950 kg

1 050 kg

supply voltage

380 V tri

engine power

1 700 W

2,5 A

air filtered to 40 µ

Electrical characteristics

electric current requirement Pneumatic characteristics supply

Product manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

• Characteristics: - frame installed from the front of the machine - pneumatic screen clamping - pneumatic clamping of the squeege and the flood bar - micrometric setting of the squeege and the flood bar’s pressure - in lower position, the frame holder assembly is locked by electromagnetic suckers guaranteeing perfect positioning - perfectly flat perforated honeycomb aluminium plate - vacuum controlled by pulse on pedal, or automatic - lifting force adjustable by handles - table adjustable longitudinally and transversally - automatic changeover squeegee/flood bar

RH machine

screenprinting m aterial

one arm printing unit - perfectly flat perforated honeycomb aluminium plate - strong pump for vacuum - longitudinal and transversal micrometric setting

SCREEN PRINTING

* making an impression

ONE ARM PRINTING UNIT

SCREEN PRINTING

This manual machine can print on any flat surface (papers, cartons, adhesives, plastic sheets, wood and plastic panels, textiles...) up to 5cm thick. Its scraping process ensures printing quality and regularity and reduces the user’s physical efforts. It is supplied with the printing maxi size corresponding squeegee: 70 or 90 cm according to the machine. • Printing table Its frame in welded steel tube ensures a perfect stiffness and stability. A shelf is set halfway down in order to store ink tins, squeegees... The frame helds the printing table, an aluminium punched panel which is absolutly stiff and withstands any kind of inks and diluters. The table slant facilitates the setting of the item which is kept held by a strong pump. The screen up and down movements automatically control the vacuum situated under the printing table. • The printing system is composed of parallel and interdependent bars - The first one is hexagonal and bears the screen holder bars which can be separately moved according to the screen sizes.The screen fastening in the slides is reinforced by manual clamping screws with washers in order to prevent frame scratches. - The second one is cylindrical and ensures the longitudinal guiding of the scraping system. • The scraping system is composed of: • a carriage on which the following elements are set: - 2 diabolo nylon wheels (spol shaped) and 2 cylindrical wheels mounted on ball-bearing to ensure a regular and even sliding. - 2 adjustable nylon stops to raise the screen and lift the squeegee. The squeegee slant may be modified according to the requirement during the printing or the flooding. • a handle which carries the carriage and bears the squeegee holder that can be moved along the handle. • a sliding counterweight with a stop to prevent its fall. On the 60 x 80 cm machine, it is sufficient enough to balance squeegee and screen while on the 80 x 120 cm machine, 2 additional counterweights are set at the end of the parallel bars. • Adjustments Thanks to the longitudinal micrometric adjustment and to the transversal micrometric adjustments set on each slide of the frame holder, the registration is easy to realize by moving the screen. The «one arm» printing machine is unanimously appreciated thanks to its numerous possibilities, its easy adjustments and its 1-phase electrical feeding.

ONE ARM PRINTING UNIT

60 x 80

80 x 120

60 x 80 cm

80 x 120 cm

90 x 120 x 4 cm

110 x 170 x 6,5 cm

100 x 173 cm

124 x 223 cm

64 x 84 cm

88 x 128 cm

item maxi thickness :

5 cm

micrometric regulation : - longitudinal stroke - transversal stroke

2 cm 4 cm

70 cm

90 cm

88 cm

87 x 146 cm

110 x 196 cm

Mechanical characteristics maxi printing size : screen maxi outside dimensions : printing table dimensions : punched surface :

supplied squeegee length : Overall dimensions table average height : dimensions on ground p x l : dimensions on ground p x l :

155 x 180 x 120 cm 180 x 230 x 122 cm

net weight :

150 kg

210 kg

gross weight (open crate) :

230 kg

310 kg

230 V mono

0,85 kW

6,4 A

Electrical characteristics feeding tension : engine power : absorbed intensity :

Product manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

The «one arm» printing unit is equipped with a vaccum base and manufactured in 2 maximum printing sizes : 60 x 80 and 80 x 120 cm.

screenprinting m aterial

precima - perfectly flat perforated honeycomb aluminium plate - strong pump for vacuum - longitudinal and transversal micrometric setting

SCREEN PRINTING

* making an impression

PRECIMA

SCREEN PRINTING

It is characterized by its regulation precision and its easy use. The screen remains horizontal during the setting and the removing of the item. The screen lift is effortless thanks to a return spring. • Printing table A frame helds the printing table made of punched alloy aluminium. The printing table is perfectly flat and withstand any kind of inks and diluters. A shelf is set halfway down in order to store ink tins, squeegees ... A powerful and soundproof vaccum helds the item in registration. It is controlled by the operator with a treadle. • Printing system Two screen holders fit the screen sizes, they are articulated on stub axles in order to determine two working positions : - low printing position - high position to set and remove the items. A return spring facilitates the lift. It is adjustable according to the screen weight and the user’s requirements. • Adjustments Thanks to the longitudinal micrometric regulations and to the transversal micrometric regulations set on each slide of the frame holder, the registration is easy to realize by moving the screen.

PRECIMA

40 x 60

60 x 80

40 x 60 cm

60 x 80 cm

60 x 80 x 4 cm

80 x 120 x 4 cm

78 x 125 cm

100 x 165 cm

perforated surface :

50 x 60 cm

65 x 85 cm

item maxi thickness :

12 cm

14 cm

2 cm 4 cm

85 cm

dimensions on ground p x l :

70 x 99 cm

90 x 146 cm

overall dimensions p x l x h :

102 x 138 x 121 cm

130 x 178 x 135 cm

80 kg

120 kg

130 kg

190 kg

230 V mono

0,85 kW

6,4 A

Mechanical characteristics maxi printing size : screen maxi outside dimensions : printing table dimensions :

micrometric regulations - longitudinal stroke - transversal stroke Overall dimensions plate height on ground :

net weight : gross weight (open crate) : Technical characteristics feeding : engine power : absorbed intensity :

Product manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

Precima is a flat printing machine equipped with a vacuum table. It is manufactured in 2 sizes:40 x 60 and 60 x 80 cm (maxi printing size). It can print on items with a 12 cm maximum thickness for the first model and 14 cm maximum thickness for the second one.

screenprinting m aterial

bench combinetuve - U.V. neon tubes - one dry rack - settable temperature

SCREEN PRINTING

* making an impression

BENCH COMBINETUVE

SCREEN PRINTING

Combinetuve is a metalic cabinet for the exposure and drying of silk screen frames up to a size of 60 x 80 cm. It consists of 2 separate element : â&#x20AC;˘ The exposure part composed of a pneumatic frame, a glass and a suple and UV resistant blankes (deformation up to 7 cm). The vacuum is obtained thanks to a story and silat palet pump.

bench Combinetuve

â&#x20AC;˘

Mechanical caracteristics

The drying part with 3 shelves heated with a turbine and a temperature regulator.

screen maxi size number of 40 W tubes glass size

608

60 x 80 cm 8 70 x 90 cm

overall dimensions dimensions feeding

87 x 133 x 54 cm 230 V 1-phase

Electrical caracteristics intensity

12 A

Sound caracteristics

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

65 decibel maxi

IMP.TIFLEX 11.02.2013 - Non contractual pictures

sound level in process

screenprinting m aterial

combinetuve - U.V. neon lighting tube - light integrator - 3 drying racks - settable temperature

SCREEN PRINTING

* making an impression

COMBINETUVE

SCREEN PRINTING

Combinetuve is a metalic cabinet for the exposure and drying of silk screen frames up to a size of 120 x 160 cm. It consists of 2 separate element : â&#x20AC;˘ The exposure part composed of a pneumatic frame, a glass and a suple and UV resistant blankes (deformation up to 7 cm). The vacuum is obtained thanks to a story and silat palet pump. The drying part with 3 shelves heated with a turbine and a temperature regulator.

812

1014

1216

screen maxi size

80 x 120 cm

100 x 140 cm

120 x 160 cm

number of 40 W tubes

9 + 1 inactinic

13 + 1 inactinic

20 + 1 inactinic

3 screens of 80 x 120 cm

3 screens of 100 x 140 cm

3 screens of 120 x 160 cm

99,5 x 139,5 cm

119,5 x 159,5 cm

139,5 x 179,5 cm

100 cm

Mechanical caracteristics

maxi capacity glass size blanket size Overall dimensions overall dimensions

105 x 140 x 106 cm 125 x 160 x 106 cm 145 x 180 x 106 cm

net weight

200 kg

300 kg

380 kg

gross weight (open crate)

220 kg

330 kg

420 kg

230 V 1-phase

12 A

15 A

20 A

feeding Electrical caracteristics intensity Sound caracteristics sound level in process

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

65 decibel maxi

IMP.TIFLEX 11.02.2013 - Non contractual pictures

â&#x20AC;˘

Combinetuve

screenprinting m aterial

exposure and drying unit - pneumatic under frame - halogen lamp - light integrator - 3 drying racks - settable temperature

SCREEN PRINTING

* making an impression

EXPOSURE AND DRYING UNIT

SCREEN PRINTING

The combine d’insolation is a compact assembly for both exposure and drying of silk screen frames. It is proposed in 3 sizes for screens up to 120 x 160 cm. It consists of 3 parts : • The exposure part equiped with an halogen lamp to be used with 2 power levels 2000 and 5000 W; an idle mode (obturator closed) maintains the lamp lightened (reduced power) between 2 exposures. • The pneumatic exposure frame which is composed of an articulated glass (for its internal cleaning) and of a resistant, supple and UV resistant blanker. The vacuum is obtained thanks to a powerful, silent paddle pump which fonctions without oif. • The drying part with 3 shelves, heated with a turbine and 2 resistances of 1300 W each and controled by a settable thermostat (60°C maxi). The combine d’insolation requires an electrical intallation 400 V 3-phase + earth.

Combine d’insolation

812

1014

1216

80 x120 cm

100 x 140 cm

120 x 160 cm

5 cm

99,5 x 139,5 cm

119,5 x 159,5 cm

139,5 x 179,5 cm

100 cm

120 x 159 cm

140 x 179 cm

Mechanical caracteristics screen maxi size maxi thickness glass size blanket size blanket dimensions

100 x 139 cm

Overall dimensions overall dimensions

106 x 152 x 247cm 126 x 172 x 247cm 146 x 192 x 247 cm

net weight

570kg

750kg

900kg

gross weight (open crate)

640 kg

820kg

980kg

400 V 3-phase + earth

Electrical caracteristics feeding lamp intensity 400 V

starting 23 A starting 23 A starting 23 A working 4A-2000W working 4A-2000W working 4A-2000W 12 A-5000W 12 A-5000W 12 A-5000W

1-phase 230 V pump engine intensity

1,30 A

pump power and discharge

0,25 Kw 6 m³/h

sound level in process

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

80 decibel maxi

IMP.TIFLEX 11.02.2013 - Non contractual pictures

Sound caracteristics

screenprinting m aterial

chassicop mural - exposure frame delivered mounted with vacuum pump

SCREEN PRINTING

* making an impression

CHASSICOP MURAL

SCREEN PRINTING

Chassicop Mural is a pneumatic frame dedicated to expose silk screens and films, offset plates, presensitized printed circuits, photofilms, diazoic papers, ..., by contact This material with horizontal loading and a blanket which opens, is available in 3 models corresponding respectively to the screen maxi outside dimensions : 80 x 100, 100 x 130 and 130 x 170 cm. This mural setting reduces the overall dimensions in vertical position, in an average proportion of 5 to 1. The mural frame is manufactured with mecanosoldered profiles with dismantling cross bars. The assembly window-mat rotates and can occupy 2 positions spaced of 90° allowing exposure from the front or the bottom of the frame. That assembly is composed of 2 articulated frames which insure a long lasting air tightness : the first one holds the window, the second one is a strong, supple(deformation up to 7 cm) and UV rays resistant. Its opening is facilitated, even for the largest model, by gas jacks. The vacuum is realized by a powerful, silent pump which functions without oil. The vacuum-regulator and vacuum gauge are available on request. Il allows to adjust the vacuum created by the pump. At your convenience, we can make a complete exposure equipment in which the digilume P control unit drives the chassicop vacuum pump.

Chassicop mural is a stable and strong equipment,its finish is perfect and satisfies even the most exacting professionals. It is supplied complete, ready to be set on the wall.

CHASSICOP MURAL

80 x 100

100 x 130

130 x 170

80 x 100 cm

100 x 130 cm

130 x 170 cm

7 cm

100 x 130 x 0,8 cm

130 x 160 x 0,8 cm

160 x 200 x 0,8 cm

125 x 145 cm

145 x 175 cm

175 x 215 cm

95 cm

25 x 159 x 172 cm

27 x 187 x 184 cm

27 x 229 x 197 cm

Mechanical characteristics screen maxi size : screen maxi thickness : glass size : blanket size : height of glass in horizontal : Overall dimensions vertical position : horizontal position :

128 x 159 cm x 169 cm 148 x 187 x 180 cm 179 x 229 x 194 cm

net weight :

130 kg

176 kg

200 kg

gross weight (open crate) :

250 kg

300 kg

450 kg

230 V

0,15 kW 3,3 m³

1,15 A

feeding tension (mono) : 27 cm hors tout encombrement réduit

power pump engine : pump engine intensity :

Product manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

Electrical characteristics

screenprinting m aterial

halogen lamp - this halogen exposure lampis equiped with a light integrator

SCREEN PRINTING

* making an impression

HALOGEN LAMP

SCREEN PRINTING

The metal halogen lamp is an exposure unit for silk screen frames. It is composed of 2 elements : â&#x20AC;˘ a programmation box positionned on a frame equiped with 4 wheels. â&#x20AC;˘ an adjustable height projector with incorporated obturator and ventilation. The halogen lamp is meant to be used with 2 different power levels: 2 000 and 5 000 W. An idle mode (obturator closed) maintains the lamp lightened (reduced power) between 2 exposures. It is adapted to all electrical installations 400 V - 2 phases. Very easily , it can be transformed in a ceiling version. The projector is hanged. For a precise setting of the exposure, the halogen lamp is equiped with a light integrator.

Halogen lamp Mechanical characteristics lamp height on the ground ground dimensions maxi total height

adjustable from 75 to 125 cm 47 x 67 cm 150 cm

net weight

80 kg

gross weight (open crate)

135 kg

Electrical characteristics feeding

400 V - 2 phases

intensity

400 V - 25A

Sound characteristics

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

80 decibels maxi

IMP.TIFLEX 11.02.2013 - Non contractual pictures

sound level while working.

SCREENPRINTING MATERIAL

stencil developing unit - unit has enables the processing of silk screens after exposure

SCREEN PRINTING

* making an impression

STENCIL DEVELOPING UNIT

SILK SCREEN & DIGITAL PRINTING

The stencil developing unit has enables the processing of silk screens after exposure. The stencil developing unit is manufactured in 3 standard models respectively corresponding to the following maxi outside dimensions of silk screens : 100 x 130 cm, 130 x 170 cm and 180 x 220 cm. It is composed of two separate parts : the frame built in rigid PVC, equipped with one shelf the metal frame the water tub, also build in rigid PVC, composed of a spread-luminous panel and white lamps. It insures an efficient control.

Stencil developing unit is also equipped with an adjustable and two sliding racks which stalls screens.

100 x 130 cm

130 x 170 cm

180 x 220 cm

Mechanical characteristics format d’écran maxi :

100 x 130 cm

130 x 170 cm

180 x 220 cm

maxi opening :

110 x 150 cm

126 x 180 cm

176 x 236 cm

81,5 x 170 x 205 cm

81,5 x 200 x 220 cm

100 x 245 x 260 cm

net weight :

150 kg

180 kg

250 kg

gross weight (open crate) :

225 kg

330 kg

475 kg

220 V mono

Outside dimensions overall dimension :

Electrical characteristics mains :

Product manufactured in France

On request and after study, we can manufacture special sized developping units.

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

• • •

stencil developing unit

SCREENPRINTING MATERIAL

SQUEEGEE SHARPENER AR 145 - right sharpening for all type of normal squeegee - interchangeable cutting blades - horizontal cutting

SCREEN PRINTING

* making an impression

SQUEEGEE SHARPENER

SCREEN PRINTING

Compatible with all standard types of serigraphy blade, the AR 145 blade sharpening machine achieves a straight cut for all blades on standard screen printing machines. The cutterblock assembly is in the form of a distributor unit consisting of 10 razor blades, guided by a cross rail and driven by a belt. The operator has total security thanks to dual controls.

The AR 145 sharpening machine complies with CEE 89/392 standard. Parts and labour are guaranteed for 6 months. Mechanical characteristics maximum sharpening length :

1 450 mm

minimum blade thickness :

3 mm

maximum blade thickness :

13 mm

blade hardness :

between 60 and 100째 Shore

type of cut :

straight

depth of cut (thickness of the chip) :

0,7 mm mini

Measurements overall dimensions (l x h x d) :

232 x 130 x 61 cm

net weight :

80 kg

gross weight (crate) :

130 kg

Electrical characteristics total power :

0,6 kW

power supply :

220 V mono

current :

Sound characteristics Sound level during operation :

max. 60 decibels

IMP.TIFLEX 11.02.2013

Product manufactured in France

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

screen printing m aterial

pneumatic automatic washing unit - airtight manufactured, uses no electricity but only compressed air

SCREEN PRINTING

* making an impression

PNEUMATIC AUTOMATIC WASHING UNIT

SCREEN PRINTING

This pneumatic automatic washing unit is airtight manufactured, uses no electricity but only compressed air. The pneumatic automatic washing unit is completly manufactured in stainless steel. It is equipped with an extracting screen holder in order to facilitate its loading. Inside the tank, 2 washing ramps slide on each side of the screen holder. This movement alongside the screen washing stand is obtained by the outside movement of a magnetic field. The solvent is placed under pressure by a pneumatic pump. The 2 washing ramps, equipped with nozzles, can be oriented in order to oppose solvent jets to the ramps movements. Fan-shaped, they softly wash the most fragile screens. This material is tightly closed even during the door opening. A compressed air curtain stops the solvents emanations during the screens loading and unloading operations. The automatic pneumatic ink washing stand is manufactured in 3 versions : • L washing unit (as described above) • LS washing and blowing unit (an air circulation drains the screen) • LRS washing,rinsing and blowing unit (a clean solvent rinsing completes the washing cycle). All these machines are equipped with stainless steel tanks, meant to store the solvents. They are compatible with the solvent recycling unit with removable tanks (see corresponding documentation). L and LS models are equipped with one tank, LRS models with 2 tanks (cleaning and rinsing solvents).

SR 120/60

SR 140/60

SR 200/100

SR 250/100

MECHANICAL CHARACTERISTICS maxi frame size:

120 x 140 cm

140 x 200 cm

200 x 250 cm

250 x 300 cm

nozzles number:

solvent tank:

54 l

94 l

PNEUMATIC CHARACTERISTICS washing air consumption:

33,6 m³/h

72 m³/h

102 m³/h

112 m³/h

blowing air consumption:

95 m³/h

110 m³/h

152 m³/h

8 bars

pressure:

OVERALL DIMENSIONS outside dimensions p x l x h:

60 x 240 x 220 cm 60 x 300 x 240 cm 60 x 351 x 300 cm 60 x 404 x 350 cm

net weight:

250 kg

390 kg

570 + 100 kg

650 + 100 kg

gross weight:

270 kg

410 kg

590 + 120 kg

700 + 100 kg

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

This material is very efficient, its functioning is completly safe and tight.

automatic ink washing

screen printing m aterial

Manual pneumatic washer Fitted with: - two different brushes - a pneumatic pump with Teflon membrane - a regulating filter with pressure gauge

SCREEN PRINTING

* making an impression

MANUAL PNEUMATIC WASHER

SCREEN PRINTING

This equipment is used to clean screens manually, under optimum safety conditions for the operator. By simply re-using filtered solvents, it also protects the workplace environment and allows savings to be made. It requires no electrical connection and operates from a compressed air supply. The machine has two brushes, each with a central solvent feed. Chemical and manual actions combine to give more effective washing. Solvents are distributed by a pneumatic pump with a Teflon membrane: the system is also fitted with a regulating filter and pressure gauge. After the washing operation, the solvents descend by gravity into a purification and storage tank, where they are purified ready for use in a new cycle. Washing can be completed by flushing with clean solvents. Removable covers retain solvent vapours within the tank. A flue, optionally linked to a mechanical extraction system, takes vapours to the exterior. In the interests of operator safety, the equipment requires no electrical connection and operates on compressed air only.

MANUAL PNEUMATIC WASHER

SM 100*

SM 150*

SE 200*

Maximum screen size

80 x 80 cm

80 x 120 cm

140 x 180 cm

Ø of extraction pipe

Ø 20 cm

60 x 100 x 190 cm

75 x 150 x 250 cm

80 x 200 x 250 cm

Net weight

105 kg

150 kg

185 kg

Gross weight

125 kg

180 kg

220 kg

8.4 m³/h

2 to 3.5 bar

MECHANICAL CHARACTERISTICS

DIMENSIONS Overall dimensions d x w x h

PNEUMATIC CHARACTERISTICS Air consumption Operating pressure

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

• SM = front loading, SE = front and side loading

SCREENPRINTING MATERIAL

FRAMES AND SCREENS - complete range of different frames

SCREEN PRINTING

* making an impression

FRAMES AND SCREENS

SCREEN PRINTING

We manufacture a complete range of different frames. In order to answer any requirement, we offer bare frames, pre-sensitised or finished screens. • Bare frames - in aluminium : they offer a very good dimensional stability and are very light. They are rustproof and withstand water and solvents. The standard outside dimensions increase by 10 cm steps. On request, we manufacture any shape, section and size. - in wood : they are still commonly used. The standard outside dimensions increase by 10 cm steps. On request, we manufacture any shape, cross section and particular sizes. • Pre-stretched screens Our stretching department manufactures the above mentionned frames straight or edge stretched with a complete range of meshes from 18 up to 200 mesh/cm in nylon* or polyester, white, or coloured. We also restretch used frames, provided they are not damaged. Thanks to high performance equipment, we also supply high-tech pre-stretched screens in 2 special aluminium sections. • Special screens We can manufacture special frames in the most various shapes : curved, round, excentered, tubular... and with different sections : metal corners, reinforcing, grooves, separations...

• Custom works Our production studio, which is equipped with CAD workstation, handles the drafting and implementation of the most complex artwork. Using your files (PC compatible on formats AI, EPS, PDF and BMP high-definition or DXF), we can enlarge, reduce, multiply, inverse, copy, select colours, retouch, etc. For large formats we do the artwork on film. * Polyamide fabrics (Nylon) are supplied on request.

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

• Finished screens According to the prints, we expose our screens either coated with our emulsions or mounted with our films. The finished screens, reinforced and protected with adhesive tapes are supplied ready to use. We manufacture the screens and typo in compliance with your documents or with positives realized by us.

supplies for sil k screen

fabrics - complete range from 10 to 180 mesh/cm of polyester fabrics (Tergal速 and polyamid Nylon速) specially designed for silk screen printing.

SCREEN PRINTING

* making an impression

FABRICS

SCREEN PRINTING

Our fabrics are produced using yarn diameters that are rigorously constant and perfectly controlled. Extremely regular weaving is essential for obtaining quality prints and is guaranteed by the use of the most modern looms. The large quantities of fabric we process allow us to provide you with one of the best quality/price ratios on the market. All our fabrics are monofilament and have been heat stabilised. They are highly resistant to water, solvents, oxidants and chlorinated products. Print work can be removed and the fabric can be used several times. • Polyester fabrics These are characterised by a high tear resistance, an above-average even extensibility in the 2 directions and a reduced loss of tension. They are abrasion-resistant and waterproof (0.4 % at 20°C and 65% relative humidity). • Polyamide fabrics (specially manufactured on request) These are completely abrasion-resistant. They are more permeable than polyester fabrics (4.4 % at 20°C and 65 % relative humidity). These fabrics are suitable for printing on irregular surfaces. They are recommended for direct printing on ceramics. • Fabric dyeing Dyeing the fabric enhances the screen exposure precision and therefore the print quality. All our fabrics are white or dyed.

• Characteristics of polyester fabrics (Tergal®) Description

yams/ cm

Name

width/ cm

Ref.

Euro

White polyester

18-160W-PW

115

2850436X

23.25

White polyester

21-160W-PW

158

2850839X

24.90

White polyester

32-100W-PW

158

2851839X

25.60

43-80W-PW

115

2853536X

24.05

43-80W-PW

158

2853539X

25.60

43-80W-PW

212

2853545X

38.30

158

2873539X

26.90

115

2853936X

24.05

158

2853939X

25.60

White polyester

Yellow polyester

43-80Y-PW

White polyester

49-70W-PW

Yellow polyester

49-70Y-PW

158

2873939X

26.90

White polyester

51-70W-PW

212

2854043X

39.15

White polyester

55-64W-PW

158

2854339X

29.00

Yellow polyester

55-64Y-PW

158

2874339X

29.50

62-64W-PW

115

2854436X

25.15

62-64W-PW

158

2854439X

28.90

62-64Y-PW

158

2874439X

33.35

White polyester Yellow polyester White polyester

68-55W-PW

Yellow polyester

68-55Y-PW

White polyester

white polyester

• New fabric denomination: 18 - 250 W PW : 18 - 250 W PW : 18 - 250 W PW : 18 - 250 W PW : PW :

- number of yarns per cm - film diameter in microns - colour of fabric W = white Y = yellow - weft of fabric - taffeta 1/1

yellow polyester

77-55W-PW

Yellow polyester

77-55Y-PW

White polyester

90-48W-PW

Yellow polyester

90-48Y-PW

115

2854836X

27.75

158

2854839X

38.10

158

2874839X

39.05

115

2855036X

28.90

158

2855039X

38.40

212

2855041X

50.25

158

2875039X

39.40

Description

yams/ cm

Name

White polyester

100

100-40W-PW

Yellow polyester

100

100-40Y-PW

Yellow polyester

110

110-34Y-PW

White polyester

Yellow polyester

White polyester

120

120-34W-PW

120-34Y-PW

120-40W-PW

width/ cm

Ref.

Euro

115

2856036X

31.40

158

2856039X

40.10

158

2876039X

41.90

212

2876041X

57.65

158

2876439X

46.70

115

2856836X

35.70

136

2856837X

41.40

158

2856839X

45.20

212

2856841X

60.95

115

2876836X

38.10

158

2876839X

46.70

212

2876841X

65.60

115

2856806X

35.70

158

2856809X

45.20

158

2876809X

46.70

212

2876811X

65.60

Yellow polyester

120

120-40Y-PW

Yellow polyester

130

130-34Y-PW

158

2877337X

55.00

White polyester

140

140-34W-PW

115

2857636X

48.65

Yellow polyester

140

140-34Y-PW

158

2877639X

63.45

212

2877641X

82.65

White polyester

150

150-34W-PW

158

2858039X

71.00

Yellow polyester

150

150-34Y-PW

158

2878039X

77.85

Yellow polyester

150

150-31Y-PW

158

2878059X

81.35

212

2875041X

52.60

115

2855636X

31.40

158

2855639X

40.10

White polyester

165

165-34W-TW

115

2858436X

64.65

158

2875639X

41.90

Yellow polyester

165

165-34Y-TW

158

2878439X

87.35

212

2875641X

57.65

Yellow polyester

180

180-31Y-TW

158

2878559X

90.00

The width is given by way of an indication and may vary several centimeters. On request, we can supply others quality and stitch material (ex : polyamid)

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013

From 10 to 180 yarns/cm, we offer a complete range of polyester fabrics (Tergal® and polyamid Nylon®) specially designed for serigraphic printing.

supplies for silk screen

screen manufacturing products

SCREEN PRINTING

* making an impression

SCREEN PRINTING

SCREEN MANUFACTURING PRODUCTS

1. Diazo compound photosensitive solutions • Diazo 19 S (for solvent-based inks) Supplied in 0.9 l pots, boxes of 6 x 0.9 l pots and 4.5 l buckets with diazocompound sensitiser dose, this solution can be used in either thick or thin layers. Good definition, resists solvents, also suitable for small printing runs with water-based inks. Stripped off with cold water. The active de-engraving agents (Oxygel, Oxysol, Oxylic) are required for its retrieval, followed by finishing with high pressure de-engraver. Stored in the dark, screens coated with Diazo 19 S can be kept for 4 months at 20°C. • Diazo 149 S (for solvent-based inks) Supplied in 0.9 l pots, boxes of 6 x 0.9 l pots and 4.5 l buckets with diazocompound sensitiser dose, this solution can be used in either thick or thin layers. Excellent definition, full resistance to all solvents. Stripped off with cold water. The active de-engraving agents (Oxygel, Oxysol, Oxylic) are required for its retrieval, followed by finishing with high pressure de-engraver. Stored in the dark, screens coated with Diazo 149 S can be kept for 4 months at 20°C. • Diazo 19 T (for water-based inks) Supplied in 0.9 l pots, boxes of 6 x 0.9 l pots and 4.5 l buckets with diazocompound sensitiser dose, this solution can be used in either thick or thin layers. Reasonable resistance to water-based inks, suitable for small printing runs with solvent-based inks. Stripped off with cold water. Retrieval is less easy : the active de-engraving agents (Oxygel, Oxysol, Oxylic) are required, followed by the use of a powerful de-engraver (P > 100 bars). Stored in the dark, screens coated with Diazo 19 T can be kept for 4 months at 20°C. 2. Diazocompound photopolymer composite photosensitive solution (these solutions are insolated with a halogen lamp) • UST (universal but more suitable for solvent-based inks) This composite emulsion, supplied in 0.9 l pots, boxes of 6 x 0.9 l pots and 4.5 l buckets with sensitiser dose, is a multi-purpose high-definition product. Stripped off with water. The screen is retrieved with our de-engraving agents Oxygel, Oxysol or Oxylic, followed by finishing with high pressure de-engraver. Stored in a dark, dry room at a temperature of 20°C, the screens sized with UST can be kept up to 20 days. • 200 S (for solvent-based ink) This composite emulsion, supplied in 0.9 l pots, boxes of 6 x 0.9 l pots and 4.5 l buckets with sensitiser dose, is a high-definition product. Stripped off with water. The screen is retrieved with our de-engraving agents Oxygel, Oxysol or Oxylic, followed by finishing with high pressure de-engraver. Stored in a dark, dry room at a temperature of 20°C, the screens sized with 200 S can be kept from 1 to 2 months.

• 200 T (universal) This composite emulsion, supplied in 0.9 l pots, boxes of 6 x 0.9 l pots and 4.5 l buckets with sensitiser dose, offers good resistance to water-based inks. It is particularly intended for thick coatings. It can also be used with plastisols and some solvent-based inks. Stripped off with cold water. Retrieval is less easy: the de-engraving agents (Oxygel, Oxysol or Oxylic) are required, followed by the use of a powerful de-engraver (P > 100 bars). Stored in the dark, the screens coated with 200 T can be kept for 15 days. • 300 T (universal) This composite emulsion, supplied in 0,9 l pots, boxes of 6 x 0,9 l pots and 4,5 l backets with sensitiser dose, is a high-definition product. Stripped off with cold water. The active de-engraving agents (Oxygel, Oxysol or Oxylic) are required for its retrieval, followed by finishing with high pressure de engraver. (P > 100 bars). Stored in the dark, the screens coated with 300 T can be kept for 4 months. 3. Additional screen manufacturing products • Prep’écran (ScreenPrep) Supplied in 5 l jerrican, this degreasing agent prepares the fabric fibres ready for coating with the solutions and assembly of the capillary films. 4. Additional products for reinforcing and retouching • Reinforcing solution Supplied in 1 l pots, it is used for retouching, reinforcing and sealing screens. Brushed on, fully resistant to all solvents, it can be removed with the traditional de-engraving products. • Filling solution XD 153 Supplied in 5 l jerricans, it is recommended whenever large areas need to be blocked up. Applied with a spatula or hollow sizing doctor blade. It is odourless, dries quickly, resists all solvents and easily removed with water. • Résistalo (Wateresist) solution Supplied in 1 l boxes, it is used for retouching and reinforcing screens which must resist inks diluted with water. Applied with a brush or spatula, its dries quickly and is removed using a solvent.

• blue pore stopper Supplied in 5 l jerricans, it is used for retouching, reinforcing and waterproofing screens. Brushed on, it dries rapidly, is fully resistant to all solvents and can be removed with the traditional de-engraving products. It is coloured blue to simplify application.

• Oxypâte and Solvypâte Supplied in 5 l jerricans, Solvypâte prepares the fabric for the fast and efficient action of Oxypâte (maximum 15 to 30 min.). Supplied in 5 l buckets, Oxypâte is a product used to eliminate ghost images.

5. Additional products for de-engraving

• Applicator brush Nylon brush used to apply all products for the treatment of ghost images.

• Oxygel De-engraving agent supplied in 5 l buckets, this ready-to-use gel is brushed on. Most solutions and photosensitive films are solubilised in just 5 minutes. Non-polluting, chlorine-free and biodegradable, it meets all requirements of the hygiene and safety committees. • Oxysol De-engraving agent supplied in 100 g and 500 g bottles and in 25 kg drums as a concentrated salt. 100 g of powder are dissolved in water to produce 5 to 10 l of ready-to-use liquid, depending on the desired degree of efficiency. Non-polluting, chlorine-free and biodegradable, it meets all requirements of the hygiene and safety committees. • Oxylic Liquid, ready-to-use de-engraving agent, supplied in 5 l jerricans. Most solutions are solubilised in just three to five minutes. Non-polluting, non-flammable and harmless, this product meets all requirements of the hygiene and safety committees. • Concentrated de-engraving agent Supplied in 5 l jerricans, this economical product is intended for manual or automatic de-engraving of the screens. It is diluted with water (1 volume of concentrated product for 20 volumes of water). Most solutions and photosensitive films are solubilised in just three to five minutes. • Finisher 4886 Supplied in 1 l bottles, it is useful if you do not have a de-engraver. It is used in combination with de-engraving agents, by dissolving any undesirable traces remaining on the fabric. 6. Products for the treatment of ghost images • Oxymage and Solvymage Oxymage supplied in 5 l buckets is a high viscosity product used to eliminate ghost images and prevent fabric yellowing due to the use of diazocompound sensitiser. Its application on a screen lasts approximately 12 hours (overnight). The action of Oxymage is completed by application of Solvymage supplied in 5 l jerricans.

7. Miscellaneous supplies for screen manufacture: • Polyurethane adhesive Two-component polyurethane base used for gluing silkscreened fabrics stretched over wooden or metal frames, it is supplied in 830 g pots plus hardener in 170 g pots. Good resistance to solvents (cleaning) and hot water (stripping). • Hollow sizing doctor blade Made from light extruded alloy, supplied in the requested length, the hollow sizing doctor blade has 2 removable plastic ends for easy cleaning. Its round, uniform profile ensures high quality sizing at constant thickness. • Polyurethane foam Supplied in 190 x 140 cm sheets 15 mm thick, it ensures even placage during screen exposure if there is no pneumatic chassis. • Polynoir plastic tape Available in rolls 66 m long and 4 widths: 25, 38, 50 and 75 mm. Guarantees excellent screen watertightness. The polypropylene support is extremely resistant to physical and chemical stress. • Polytoil adhesive tape Available in rolls 50 m long and 4 widths: 25, 38, 50 and 75 mm. It offers the same mechanical strength characteristics as Polynoir but is more flexible and displays greater adherence when used with screen washers. • Silver adhesive tape Applied directly on the fabric, on the outer side of the screen, it stops any “leaks”. Fully resistant to solvents and thinners. Available in rolls 66 m long and 2 widths: 25 and 38 mm.

SCREEN MANUFACTURING PRODUCTS

SCREEN PRINTING

8. Solution selection table diazo 19 S

diazo 149 S

diazo 19 T

U.S.T.

200 S

200 T

300 T

Graphic HU

Graphic PES

Vitrum HHU

Textil HT

viscosity at 20°C

6 Pa.s

7,5 Pa.s

6 Pa.s

8 Pa.s

20 Pa.s

18 Pa.s

7,75 Pa.s

13 Pa.s

3 Pa.s

35 Pa.s

18 Pa.s

fromfinition

***

****

*****

***

*****

****

resolution

***

****

***

*****

***

****

resistyearce to solvents resistyearce to water

****

*****

****

*****

****

*****

****

*****

from-engraving

****

*****

****

approximate lifetime of the sensitised emulsion at 20°C

4 months 4 months 4 months 1 months 1 months 1 months 1 months 1 months

approximate lifetime of the non-sensitised emulsion

2 years

approximate lifetime of the 4 months 4 months 4 months coated screen stored at 20°C recommenfromd mesh

Remarks: • several characteristics are assessed on a quality scale ranging from 1 star for the worst result to 5 stars for the best. • the definition of a coated solution is its ability to reproduce a geometric shape such as a circle. • the resolution of a coated solution is its ability to reproduce the finest possible line. • Diazo 19 S solution is a good multi-purpose product. • Diazo 149 S solution is appreciated for its fineness. • 200 S is a very high performance universal solution, intended for solvent-based inks. • 200 T is a very high performance universal solution • 300 T is an excellent multi-purpose solution. Very good resistance to water-based inks, resists plastisols and some solvent-based inks.

1 months 1 months

1 year to une température < to 20°C

1 year

2 years

1 year

20 dayss

1 to 2 months

15 dayss

4 months

15 dayss

from 50 from 50 from 10 from 40 from 40 from 30 from 30 from 43 from 62 from 12 from 34 to 165 to 200 to 135 to 200 to 200 to 165 to 165 to 200 to 200 to 120 to 120 fibres/cm fibres/cm fibres/cm fibres/cm fibres/cm fibres/cm fibres/cm fibres/cm fibres/cm fibres/cm fibres/cm

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

characteristics

additional products, miscellaneous

miscellaneous products - for ink preparation - printing supplies - cleaning supplies - hygiene supplies

SCREEN PRINTING

* making an impression

MISCELLANEOUS PRODUCTS

SCREEN PRINTING

• Empty pots, empty buckets (with covers) 1 l (boxes of 14) empty pots and 5 l (boxes of 6) empty buckets made from black polyethylene, to prepare ink/thinner mixtures easily. • Mixing cups (with covers) Sold in packets of 25, made from transparent polypropylene, resist all solvents. Flexible and unbreakable, they contain 250 and 550 ml. Extremely useful when mixing and diluting with graduations printed on the side. • Wooden sticks Two models suitable for the mixing cups, 1 l empty pot and 5 l empty bucket. A very useful accessory when mixing in the ink boxes. • Mixing knives Two models suitable for the 1 l empty pot and 5 l empty bucket. Stainless steel blade, 150 or 250 mm long. Used to mix and prepare inks. • 8 kg ink weight scale precision 0,1 A must for all silkscreening workshops. Simple, practical and reliable, range 0 to 8000 grams, accurate to the nearest gram. • Pantone® colour chart Tiflex manufactures and sells numerous types of ink compatible with the “Pantone tinting guide”. This guide includes a selection of 1000 hues from the Pantone colour chart. The formulation of each hue is given, in order to quickly mix these 1000 Pantone hues. Miscellaneous printing supplies • Spatulas Available in dimensions of 100 and 140 mm wide, our stainless steel spatulas have rounded corners to avoid tearing the fabric. • Stop-Sec drying inhibitor (freon-free) Sold individually or in boxes of 6 x 500 ml aerosol sprays. By spraying on this drying inhibitor before the end of each print run, the next job can be immediately restarted without cleaning the screen and without modifying the ink characteristics. • Aerofix S (freon-free) Sold in boxes of 12 x 600 ml aerosol sprays, this adhesive is especially designed to hold the fabrics while printing. • Takter 1 Sold in boxes of 12 x 500 ml aerosol sprays, water based adhesive to fix fabric on the printing board. • PVC shims for feeding Packed in bags of 25 shims, thickness 0.4 and 1 mm, they make it easier to position the printed sheets. • Temperature indicators Packed in bags of 30 strips, they indicate temperatures from 138 to 188°C.

Miscellaneous cleaning supplies • Clean cloths Delivered in 10 kg bags. • Cellulose wadding Rolls of approximately 1500 precut sheets, dimensions 35 x 29 cm, supplied in packs of 2. • Cleaning towels Delivered in 72-towel containers or in boxes of 6 containers. They are pre-impregnated with a cleaning solution. • Humidifier can, 1.9 l and 3.8 l The cleaning solvent is quickly applied on the cloth or the wadding with this practical can. Miscellaneous hygiene supplies • High protection cream Supplied individually or in boxes of 12, in 240 ml aerosol sprays, this cream protects the hands and forearms from inks and solvents. • Protective gloves Offering full protection against solvents, they protect the hands and forearms. • Disposable latex gloves Packed in boxes of 100 gloves, for hand protection. • Gel soap In 5 l cans, cleans any traces of ink on the hands whilst softening the skin. Biodegradable. A dispenser pump and wall support are also available for this soap can.

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 25.02.2013 - Non contractual pictures

Miscellaneous supplies for ink preparation

supplies for silk screen

squeegees & flood bars - complete range of flood bars suitable for the various printing systems and most existing machines

SCREEN PRINTING

* making an impression

SQUEEGEES & FLOOD BARS

SCREEN PRINTING

Flood bars We propose a complete range of flood bars suitable for the various printing systems and most existing machines. They are cut to the required length. Unless specified in the order they are delivered in average hardness.

MO type, metal profile flood bar, equipped with MO type 35 x 7 mm interchangeable polyurethane flood bar support with interchangeable blued steel blade

HLS type, Metal profile flood bar, equipped with 50 x 9 mm interchangeable polyurethane flood bars support with interchangeable blued steel blade

20 mm

70 mm

77 mm

66 mm

55 mm

85 mm

â&#x20AC;˘ Machine flood bar supports and doctor blades

A type, for Electra metal profile flood bar, equipped with 50 x 9 mm interchangeable polyurethane flood bar support with interchangeable blued steel blade

HLS

EV Electra

Electra pneumatic

Electra mechanics

flood bars

HLS type

MO type

A type

flood bar supports

HLS type

MO type

BP type

B(1) type

A type

specify the shape

30 mm

D type, large wooden moulding, equipped with polyurethane 50 x 9 mm 20 mm

110 mm

(1)

• Squeegee blades for manual printing

90 mm

135 mm

B type, flood bar support with interchangeable blued steel blade

• «one hand» flood bar 40 mm

95 mm

C type, wooden mounting, equipped with polyurethane 50 x 9 mm

E type, small wooden moulding, equipped with polyurethane 25 x 5 mm

• Special squeegee blades On request squeegee blade for drum machines, cylma and bottle machines.

• General remarks - a squeegee blade with rounded angle deposits more ink than one sharpened at a right angle - a soft squeegee blade deposits more ink than a hard one - to print a fine or half tone pattern a very hard and perfectly sharpened squeegee blade must be used - the greater the angle of inclination of the squeegee blade, the more ink is deposited - absence of squeegee blade inclination can be compensated by sharpening the blade at an angle (possible with our inclined plane sharpener) - the print quality is directly related to the quality of the squeegee blade: a worn doctor blade is a bad tool.

SQUEEGEES & FLOOD BARS

SCREEN PRINTING Description

Ref.

MONOBLOCS 20 x 5 mm Red, solid, 3 m strip

244200510C3

Green, solid, 3 m strip

244200510D3

Gold 75° shore, solid, 3 m strip

244200510K3

Gold 80° shore, solid, 3 m strip

244200511K3 MONOBLOCS 25 x 5 mm

Red, solid, 3 m strip

244250510C3

Green, solid, 3 m strip

244250510D3

Blue, solid, 3 m strip

244250510E3

Gold 75° shore, solid, 3 m strip

244250510K3

Gold 80° shore, solid, 3 m strip

244250511K3

Green, double bevel 45°, 3 m strip

244250535L3

Blue, double bevel 45°, 3 m strip

244250535M3

Gold, 80° shore, double bevel 45°, 3 m strip

244250535N3

MONOBLOCS 35 x 7 mm Red, solid, 3 m strip

244350710C3

Green, solid, 3 m strip

244350710D3

Gold 75° shore, solid, 3 m strip

244350710K3

Polyurethanes We propose a complete range of polyurethanes. • Qualities - monobloc (single-component) - composite (2 qualities one stuck above the other) (3C) - 3C (triple layers) • Shore hardness variable from 65 to 85° identified by the colour : red 65-70°, green 70-75°, blue 75-80°, gold 75-80° and 80-85°. The Gold variety is characterised by exceptional mechanical resistance to friction and UV. It is an excellent polyurethane. • Solid profile and double bevel 45°

Polyurethanes composites Description compositeS 50 x 9 mm

MONOBLOCS 40 x 5 mm Green, solid, 3 m strip

244400510D3

Blue, solid, 3 m strip

244400510E3

MONOBLOCS 40 x 8 mm for Schenk printing machines* Green, plain, 3,33 m strip, 75°shore

244400810Q3

Red, Bullnose, 3,33 strip, 65 shore

244400810P3

Ref.

Red, solid, 3 m strip

244500950C3

Green, solid, 3 m strip

244500950D3

MONOBLOCS 50 x 6 mm Red, solid, 3 m strip

244500610C3

Green, solid, 3 m strip

244500610D3 244500610E3 MONOBLOCS 50 x 7 mm

Red, solid, 3 m strip

244500710C3

Green, solid, 3 m strip

244500710D3

Gold 80° shore, solid, 3 m strip

244500711K3 MONOBLOCS 50 x 9 mm

Red, solid, 3,66 m strip

244500910C4

Green, solid, 3,66 m strip

244500910D4

Blue, solid, 3,66 m strip

244500910E4

Brown, solid, 3,66 m strip

244500910F4

Gold 75° shore, solid, 3,66 m strip

244500950K4

Gold 80° shore, solid, 3,66 m strip Other dimensions : contact us. * Minimum Order: 3 lengths. Within 4 weeks.

244500911Z4

Description

Ref.

polyurEthaneS 3C, 50 x 9 mm Red, 3,66 m strip

245704

Green, 3,66 m strip

245604

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 25.02.2013 - Non contractual pictures

Blue, solid, 3 m strip

Polyurethanes 3C

supplies for sil k screen

exposure films - masking films - mounting films

SCREEN PRINTING

* making an impression

EXPOSURE FILMS

SCREEN PRINTING

In order to manufacture silk screens, Tiflex offers masking films and mounting. • Masking films They enable to obtain positive or negative expositions or colour selection. It can be cut manually or on a plotter controlled by computer. They are composed of a transparent and stable polyester base of 75 or 125 µ on which an inactinic translucent layer is laminated. Proposed in red : the layer is restickable. All these films are supplied in the following packagings :

• Mounting films thickness 100 µ packaging rolls : 20 x 1,04 m

thickness filmac 75 µ

filmac 125 µ

• •

•

packaging 10 x 1,03 m 50 x 1,03 m

10 x 1,23 m 50 x 1,23 m

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013

rolls :

supplies for sil k screen

capillary films

- pre-sensitised diazo photofilm

SCREEN PRINTING

* making an impression

CAPILLARY FILMS

SCREEN PRINTING

Diazofilm is a pre-sensitised diazo photofilm for use with solvent-based and UV inks. It combines all the advantages of an indirect film (regular layer and high definition) with those of a direct emulsion. Diazofilm is made of a 20 or 30-micron thick emulsion, laid on a 75-micron polyester carrier.

Its use is simple, quick and clean. The film is mounted by capillarity after wetting both sides of the screen. To obtain a good quality mounting of the Diazofilm, it is necessary to pre-treat the material with Prep’écran (see page : Products for screen manufacturing). This film offers excellent definition, great solidity and a perfect dimensional stability. The reclamation of screens exposed with Diazofilm is easy with Oxygel, Oxysol or Oxylic screen reclaimer followed by a final high pressure wash out. Diazofilm (20 or 30-micron) is packaged in 10 x 1,04 m rolls.

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP.TIFLEX 11.02.2013 - Non contractual pictures

• Thick capillary film Used for printing graphical effects on material, this film will set large volumes of ink into a regular layer. It is available in 2 thicknesses: 200 and 400 microns, or in boxes of 10 in the following sizes: 43 x 61 cm.

TEXTILE inks FLASHCOLOR

Quick flash cure plastisol inks for textile printing. Direct printing and printing by transfer.

SCREEN PRINTING

* making an impression

Only our Web-site is authorised to give real-time information about our inks. Paper notices are considered unwritten and no longer engage our company’s responsibility once they are updated on our Web-site. Our responsibility can be engaged only if the customer has based his position on the information published on our Web-site. In all cases, the user should carry out validation tests under his own conditions before using our inks for his production. The safety data sheets are available free at: www.tiflex.com/fds

SCREEN PRINTING

Flashcolor Quick flash cure plastisol inks for textile printing. Direct printing and printing by transfer.

SPECIFICATIONS

USE

¾¾Surface aspect: satin ¾¾Smell: very few ¾¾Average density: 1,25 ¾¾Rheology: thixotropic ink ¾¾Fusion temperature infrared tunnel: 2 min. at 150 - 160°C recommended: values to be adjusted depending on the material used (test the printing according to the washing programme recommended for the cloth) ¾¾Opacity: excellent ¾¾Coverage: 20 m²/l with a 48 -70 mesh ¾¾Washing resistance: good ¾¾Ironing: on the back ¾¾Plastifying thinner: • drying activator 7158 (complies to OEKOTEX standard) • retarder XD 835 (does not comply to OEKOTEX) ¾¾Cleaning solvents: 2881, 2899, NS-81, NS-91 and NS-99 ¾¾Expiry: refer to the label ¾¾Colours miscible together: yes

The FLASHCOLOR inks are used with coated screens with Diazo S (19 S, 149 S) or Diazo - Photopolymer (UST, 200S) or Graphic HU, Textil HT, Textil PV solutions... The fabric mesh is chosen according to the work to be carried out. FLASHCOLOR inks can be used in two ways: - Direct printing: For multiple printing, we recommend flashing between each colour. After suitable heating treatment, the printed substrates at ambient temperature are touch dry and flexible. Flashing time and polymerization time depend on the following factors : • ink type, colour and printed thickness • printed substrate, nature and colour • equipment used and its environment. When a minimum flashing time is required, we recommend you to use our flash cure white. Drying depends on the thickness of the ink film (the complete thickness of the ink film must reach the correct temperature), the material, the drying time, the colour of the ink and the support (extreme case of white on black fabric) and the fabric composition. Remarks: When printing with FLASHCOLOR ink on textiles which are fragile at temperature of 150-160°C, catalyst XD 150 (representing 5% of the ink weight) can be added to the ink. The polymerization temperature may therefore be lowered by 10 - 20°C. In this case, the pot life will be about 8 hours. Catalyst XD 150 will be used either to ensure a complete drying of a thick layer, either in case of a temperature sensitive thread or to reinforce the polymerization of gold and silver colours. Blend the ink before use. Use only referenced additives - Printing by transfer (refer to data sheet «TEXTILE TRANSFER»)

Storage AND Toxicology The FLASHCOLOR inks comply with EN 71-3 standard.

STANDARD COLOURS Ref.

Packaging

Ref.

Packaging

OPAQUE Ref.

Packaging

lemon yellow*

fuchsia*

3962015

3962032

3962025

3964015

3964032

3964025

violet*

3962016

3962039

3962050

3964016

3964039

3964050

Packaging

3962066

3964002

3964066

deep blue

emerald green

opacity red

3962068

3964008

3964068

3962018

3962041

3962054

3962073

3964018

3964041

3964054

3964073

bright green

black*

3962019

ultramarine blue 3962044 1l

3962060

3962034

3964019

3964044

3964060

3964034

solid red*

steel blue

caramel

3964078

high opacity white 3964077 5l

medium green

mid blue

3962009

3962046

3962062

3964009

3964046

3964062

rubis red*

OPAQUE

royal blue

Packaging

opacity yellow

gold yellow*

orange*

Ref.

mint green*

reflex blue

medium yellow

Ref.

primary blue*

green

white*

3962028

3962048

3962064

3964028

3964048

3964064

3962012 3964012

1l 5l

flash cure white 3962010 1l 3964010 5l

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

Only our Web-site is authorised to give real-time information about our inks. Paper notices are considered unwritten and no longer engage our companyâ&#x20AC;&#x2122;s responsibility once they are updated on our Web-site. Our responsibility can be engaged only if the customer has based his position on the information published on our Web-site. In all cases, the user should carry out validation tests under his own conditions before using our inks for his production. The safety data sheets are available free at: www.tiflex.com/fds

THIXO 4-COLOURS PROCESS

FLUO

Ref.

Packaging

METALLIC AND SPECIAL EFFECT Packaging

Ref.

Packaging

ADDITIONAL PRODUCTS Ref.

Packaging

silver 3962090

thinner base* 3962005

3964085

3964090

3964005

4-colours magenta thixo 3962081 1l

fluo orange 3962086

sparkle silver 3962091

thinner base soft 3962006

3964081

3964086

3964091

3964006

4-colours cyan thixo 3962082

fluo red 3962087

gold 3962095

pearl base 3962007

3964082

3964087

3964095

3964007

4-colours black thixo 3962083

fluo pink 3962088

sparkle gold 3962094

puff agent plastisol 3952090

3964083

3964088

3964094

3954090

fluo green 3962089

shiny gold 3962093

glitter base 3954096

3964089

3964093

luminescent 3962096

sparkle glue 3954099

3964096

puff transfer base 3954095

reflective 3962098

3964098

4-colours yellow thixo 3962080 3964080

1l 5l

fluo yellow 3962085

TIFLEX would like to draw you attention to the following points: Before starting production, you are recommended to check the ink compatibility and resistance on a textile by washing the finished article according to the conditions indicated on its label. Washing resistance may be reduced with some dyes rich in bases or white (transparent or pastel colours). The washing resistance may also be reduced due to fibrillation (fibres projecting through the printing). This phenomenon is independent of the ink polymerisation. XD 150 catalyst will be used either to ensure complete polymerisation of a thick layer or when using a fabric with poor temperature resistance. High washing temperatures associated with powerful detergents may lead to colour changes with some colours including gold and silver.

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

COMPLEMENTARY PRODUCTS Ref.

Packaging

catalyst XD 150 3981299

250 gr

catalyst XD 150 3982099

le kg

gelifying agent 3952061

le kg

Non contractual colours and pictures - IMP. TIFLEX 28.01.2013

SCREEN PRINTING

E E R F E T A L HA T H P

TEXTILE inks Oekoflash

Quick flash plastisol ink which can be used with textiles which will be classified: Ĺ&#x2019;KOTEX 100 Class I. Direct printing and printing by transfer. WITHOUT PHTHALATE.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Oekoflash

Quick flash plastisol ink which can be used with textiles which will be classified: ŒKOTEX 100 Class I. Direct printing and printing by transfer. WITHOUT PHTHALATE.

SPECIFICATIONS ¾¾Appearance: ¾¾Smell: ¾¾Average density: ¾¾Rheology: ¾¾Polymerisation: ¾¾Covering power by opacity: ¾¾Coverage rate: ¾¾Washing resistance: ¾¾Ironing: ¾¾Diluent accelerator: ¾¾Cleaning solvents: ¾¾Expiry: ¾¾colours miscible together:

USE satin very few 1,25 thixotropic ink 2 min. at 150 - 160°C values to be adjusted depending on the material used (test the printing according to the washing programme recommended for the article) excellent 20 m²/l with a 48 -70 mesh good on the reverse side 7158 2881, 2899, NS-81, NS-91 and NS-99 refer to the label yes

The ŒKOFLASH inks are used with screens coated with Diazo S (19 S, 149 S) or Diazo - Photopolymer (UST, 200S) or Graphic HU, Textil HT, Textil PV ... solutions. The mesh is chosen according to the work to be carried out. For multiple printing, we recommend flashing between each colour. After suitable heating treatment, the printed SUBSTRATES at ambient temperature are touch dry and flexible. Time for flashing and polymerisation are function of the following factors: - ink type, colour and printed thickness - printed substrate, nature and colour - used equipment and environment. When a minimum flashing time is required, we recommend the use of lightning white. Drying depends on the thickness of the ink film (the complete thickness of the ink film must reach the correct temperature), the material, the drying time, the colour of the ink and the support (extreme case of white on black fabric) and the fabric composition. N.B.: When printing with ŒKOFLASH ink on textiles which are fragile at temperature of 150-160°C, 5 % by weight of catalyst XD 150 can be added to the ink. The polymerisation temperature may therefore be lowered by 10 - 20°C. In this case, the pot life will be about 8 hours. It does not avoid a passage I.R. drying tunnel. Blend the ink before use. Use only referenced additives - Printing by transfer (refer to data sheet «TEXTILE TRANSFER»)

Storage AND Toxicology The ŒKOFLASH inks comply with EN 71-3 standard and in clothing which will receive ŒKOTEX 100 class I labelling for babies.

E E R F E T A L HA T H P

STANDARD COLOURS Ref. Packaging

Ref. Packaging

lemon yellow*

fuchsia*

deep blue

3934013

3934015

3934026

Ref. Packaging white*

3934000

kilimandjaro white 3954010 medium yellow

violet*

3934003

3934016

medium green 5l

3934034

flash cure white 3934086 5l high opacity white 3934082 5l

gold yellow*

royal blue

3934004

3934024

orange* 3934012

3934021

3934020

reflex blue 5l

3934025

3934031

mint green*

primary blue*

rubis red* 3934011

mid blue

solid red* 3934010

green

3934035

emerald green 3934033

black* 5l

3934044

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

4-COLOURS PROCESS THIXO

SPECIAL EFFECT

BASES

COMPLEMENTARY PRODUCTS

Ref. Packaging

4-colours yellow thixo 3934051

sparkle silver 3934091

thinner base* 3934066

catalyst XD 150 3981299

250 gr

sparkle gold 3934094

soft base 3934067

gelifying agent 3982099

le kg

glossy elastic base 3954091

4-colours magenta thixo 3934052 5l 4-colours cyan thixo 3934054

4-colours black thixo 3934056

TIFLEX would like to draw you attention to the following points: Before starting production, you are recommended to check the ink compatibility and resistance on a textile by washing the finished article according to the conditions indicated on its label. Washing resistance may be reduced with some dyes rich in bases or white (transparent or pastel colours). The washing resistance may also be reduced due to fibrillation (fibres projecting through the printing). This phenomenon is independent of the ink polymerisation. High washing temperatures associated with powerful detergents may lead to colour changes with some colours including gold and silver.

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

Non contractual colours and pictures - IMP. TIFLEX 28.10.2012

SCREEN PRINTING

E E R F E T A L PHTHA

TEXTILE inks Everest

Phthalate free Plastisol ink, It can be flash cured and printable on Oekotex 100 Class 1 certified fabrics. For direct and transfer printing. WITHOUT PHTHALATE.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Everest Phthalate free Plastisol ink, It can be flash cured and printable on Oekotex 100 Class 1 certified fabrics. For direct and transfer printing. WITHOUT PHTHALATE.

SPECIFICATIONS

USE

¾¾Appearance:

satin

¾¾Smell:

very few

¾¾Average density:

1,25

¾¾Rheology:

thixotropic ink

¾¾Polymerisation:

2 min. at 150 - 160°C values to be adjusted depending on the material used (test the printing based on the planned wash program for the article)

¾¾Covering power by opacity:

excellent

¾¾Coverage rate:

20 m²/l with a 48 -70 mesh

¾¾Washing resistance:

good

¾¾Ironing:

on the reverse side

¾¾Diluent accelerator:

7158

¾¾Plastifying diluent Everest:

3194024

¾¾Cleaning solvents:

2881, 2899, NS-81, NS-91 and NS-99

¾¾Expiry:

refer to the label

¾¾Colours miscible together:

yes

The EVEREST inks are used with screens coated with Diazo S (19S/149S) or Diazo-Photopolymer (UST, 200S) or Graphic HU, Textil HT, Textil PV solutions. Fabric mesh is chosen based on the work to be carried out. For multiple printing, we recommend you to flash between each colour. After suitable heating treatment, the printed substrates, at ambient temperature, are touch dry and flexible. Times for flashing and polymerization are based on: • The ink, its colour, and the thickness deposited • The printed substrate, its make-up , its colour • The material used and its environment Note: we also recommend you to add our hardener XD 150 (representing 5% of the ink weigh) in case of printing of fragile fabrics (polymerization at 150°C/160°C). Then the temperature of polymerization could be lowed from 10°C to 20°C. In that case, “pot life” will be around 8 hours. The hardener will be used either to ensure complete polymerization of a wide layer, either in case of a specific washing resistance (fragile fabric) or for a short drying in an IR oven. Transfer printing will be done with the Everest ink like the other plastisol inks in general and you can use a special Everest adhesive. Blend the ink before use. Use only referenced additives

Storage AND Toxicology The Everest inks comply with the norm EN 71-3 and can be printed on Oekotex 100 Class 1 babies clothes.

E E R F E T A L PHTHA

STANDARD COLOURS Ref.

Packaging

lemon yellow* 39C4002

Ref.

Packaging

fuschia* 39C4015

Ref.

Packaging

deep blue 5l

39C4026

Ref.

Packaging

white* 5l

39C4000

anti bleeding white 39C4095 5l medium yellow

violet*

39C4003

39C4016

green 5l

39C4031

POLAR WHITE 5l

39C4095

FLASH CURE WHITE 39C4086 gold yellow*

royal blue

39C4004

39C4024

orange 39C4006

rubis red* 39C4011

mid blue

solid red* 39C4013

mint green*

39C4021

39C4035

emerald green 5l

39C4033

primary blue*

black*

39C4020

39C4044

reflex blue 5l

39C4025

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

SCREEN PRINTING

4-COLOURS PROCESS

BASES

Ref.

SPECIAL EFFECT Packaging

Ref.

ADHESIVES Packaging

Ref.

Packaging

4-COLOURS yellow 39C4050

thinner base* 39C4066

sparkle silver 39C4091

white adhesive 39C4098

4-COLOURS magenta 39C4052

elastic base 39C4092

sparkle gold 39C4094

transparent adhesive 39C4099

4-COLOURS cyan 39C4054

4-COLOURS black 39C4056

powder adhesive 3863327

3 kg

ADHESIVES Ref. Plastifying 3194024

TIFLEX would like to draw you attention to the following points: Before starting production, you are recommended to check the ink compatibility and resistance on a textile by washing the finished article according to the conditions indicated on its label. Washing resistance may be reduced with some dyes rich in bases or white (transparent or pastel Colours). The washing resistance may also be reduced due to fibrillation (fibres projecting through the printing). This phenomenon is independent of the ink polymerisation. High washing temperatures associated with powerful detergents may lead to colour changes with some Colours including gold and silver.

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

Packaging 5l

IMP. TIFLEX 13.06.2013. Non contractual colours and pictures.

Packaging

PVC FREE EE PHTHALATE FR

TEXTILE inks Dreamflash

PVC and PHTHALATE FREE ink printable on Oekotex 100 Class 1 certified fabrics. Direct printing and transfert printing.

SCREEN PRINTING

* making an impression

Dreamflash PVC and PHTHALATE FREE ink printable on Oekotex 100 Class 1 certified fabrics. Direct printing and transfert printing.

Ref.

Packaging

4-COLOURS PROCESS Ref.

Packaging

lemon yellow*

violet*

39A4002

39A4016

USE

STANDARD colours

satin very few 1,20 thixotropic ink 2 min. at 140°C values to be adjusted depending on the material used (test the printing according to the washing programme recommended for the article) excellent 20 m²/l with a 48 -70 mesh good on the back 7158 2881, 2891, 2899 and NS-91 refer to the label yes

TIFLEX would like to draw your attention to the following points: Before starting production, you are recommended to check the ink compatibility and resistance on a textile by washing the finished article according to the conditions indicated on its label. Washing resistance may be reduced with some dyes rich in bases or white (transparent or pastel colours). The washing resistance may also be reduced due to fibrillation (fibres projecting through the printing). This phenomenon is independent of ink polymerisation. High washing temperatures associated with powerful detergents may lead to colour changes with some colours.

DREAMFLASH inks are using with Diazo S or Diazo (19 S, 149 S) - Photopolymer (UST, 200S) or Graphic HU, Textil HT, Textil PV solutions... coated screens. Stitch material is function of the work to realize. In case of multiple printings, we recommend you to flash between each colour. After adaptable thermic treatment, ambient temperature printings are dry and supple. Flashing and polymerization times are function of : • ink, its colour and its thickness • printed substrate, its composition, its colour • susbtrate used and its environment We advice you to determinate flashing and polymerization times by successive tests. Transfer printing: We advise you to use a powder adhesive Support: printing on matt polyester film 2543600 or on siliconed paper 2543300 Pregelling in the tunnel: 2 min at 120°C Textile transfer by heating press: pressure 4 bars, t°c 140°C - 160°C, time ; 20 sec We advise you to check the following parameters thanks to several washing resistance tests. In order to reinforce physical properties of the ink you can add 5% of hardener XD150. Therefore pot-life will be reduced to 2 hours maximum.

The DREAMFLASH inks comply with the norm EN 71-3 and can be printed on Oekotex 100 Class 1 babies clothes.

PVC FREE EE R F E T A L A H T PH

gold yellow*

primary blue*

39A4004

39A4020

orange* 39A4006

mint green* 5l

39A4035

4-COLOURS yellow 39A4050 5l

4-COLOURS cyan 39A4054

4-COLOURS black 39A4056

opaque Ref.

Packaging

high opaque WHITE 39A4080 5l

solid red* 39A4013

black* 5l

39A4044

rubis red*

SPECIAL EFFECT 5l

39A4011

white* 5l

39A4000

Ref.

Packaging

SPARKLE SILVER 39A4091

SPARKLE GOLD 39A4094

thinner base* 39A4058

39A4015

adhesive

fuschia*

3864033

5l powder adhesive 3863327

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

Packaging

4-COLOURS magenta 39A4052 5l

Blend the ink before use. Use only referenced additives

Storage AND Toxicology

Ref.

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

3 kg

MP. TIFLEX 13.06.2013

SCREEN PRINTING

TEXTILE inks Aquadir

Water-based polyurethane ink for printing directly on textiles. It yields flexible and elastic prints. Used with a hardener, it can dry below 100 째C and limit the drawing of the printed fabrics.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Aquadir

Water-based polyurethane ink for printing directly on textiles. It yields flexible and elastic prints. Used with a hardener, it can dry below 100 °C and limit the drawing of the printed fabrics.

Ref.

Packaging

lemon 3522002

Ref.

Packaging

violet 1l

3522016

The AQUADIR inks are used with coated screens with 19T, 200T, UST or Textil HT solutions. The fabric mesh is chosen according to the work to be carried out. To achieve maximum opacity, we recommend you to use size of mesh from 36 and 70 fibres/cm. For multiple printing, we recommend you to flash between each colour. The last layer has to be dried in an IR tunnel during 2 minutes at 160°C. In case of ink blending combined with low temperature hardener to avoid pigments migration, drying conditions will consequently be 100°C for 2 mn.

3544000

covering white 3544087

yellow 3522004

primary blue 1l

3522020

BASE

IMPLEMENTATION

Preparation is required before using this range of inks. The pigmented concentrates are used with the thinner base on its own or with the thinner base and the blending white.

Packaging

thinner white

USE satin very slight 1.25 thixotropic ink - 2 min at 160 °C in IR tunnel, value to be adjusted according to the material used (test the printing according to the wash programme recommended); to avoid drawing of the dyes or the fabric, it is possible to add low temperature hardeners that work under the following conditions: - with hardener 3540560 at 2%, 2 min at 90 °C in IR tunnel, value to be adjusted according to the material used (test the printing according to the wash programme recommended) - for drying at room temperature, hardener 3540561 must be mixed at up to 2 % (wait 8 to 15 days before washing to test the printing) water good 20 m²/l with 36 - 70 fabric correctly fixed, resists domestic washing: 30 to 50 °C cycles on the reverse 3X9394 12 months between 0 °C and 35 °C yes

Ref.

Ref. orange 3522006

mint green 1l

3522035

Packaging

thinner base 1l

3544066

preparation

• Red resist, ruby red and black, 90% thinner base, 10% pigmented concentrate. • Lemon, thinner base 37,5%, blending white 60%, 2,5% pigmented concentrate. • Other colours, 20% base, 60% white, 20% pigment concentrate. • Gold paste 20 %, base 80 %. • Silver paste 13 %, base 87 %.

METALLIC Ref. cherry red 3522008

black 1l

3522044

TIFLEX would like to draw your attention to the following points: Before starting production, you are recommended to check ink compatibility and resistance on a textile by washing the finished article according to the conditions indicated on its label. Washing resistance may be reduced with some dyes rich in base colours or white (transparent or pastel colours) or a too important incorporation of pigment concentrates. The washing resistance may also be reduced due to fibrillation (fibres projecting through the printing). This phenomenon is independent of ink polymerisation. High washing temperatures associated with powerful detergents may lead to colour changes with some colours.

rubis red 3522012

ADDITIVES Ref.

Packaging

room temperature hardener 3540561 100 g

fuschia 3522015

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

sylver paste 3542046 1 kg gold paste 3562096 1 kg

Storage AND Toxicology The AQUADIR inks comply with EN 71-3 standard.

Packaging

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

low temperature hardener 3540560 100 g

MP. TIFLEX 28.01.2013

SPECIFICATIONS ¾¾Finish: ¾¾Odour: ¾¾Average density: ¾¾Rheology: ¾¾Polymerisation: ¾¾Cleaning solvents: ¾¾Covering power: ¾¾Surface yield: ¾¾Washing resistance: ¾¾Ironing: ¾¾Retarding diluent: ¾¾Shelf life: ¾¾Storage conditions: ¾¾Colours miscible together:

STANDARD colours

PIGMENT CONCENTRATES

TEXTILE inks Aquatrans

Water-based polyurethane ink (mono component) for transfer printing. Good flexibility, high elasticity.

SCREEN PRINTING

* making an impression

Aquatrans

Water-based polyurethane ink (mono component) for transfer printing. Good flexibility, high elasticity. SPECIFICATIONS ¾¾Appearance: ¾¾Smell: ¾¾Average density: ¾¾Rheology: ¾¾Cleaning product: ¾¾Covering power: ¾¾Coverage rate: ¾¾Washing resistance: ¾¾Elasticity: ¾¾Ironing: ¾¾Delaying agent: ¾¾Thickner: ¾¾Expiry date: ¾¾Storage conditions: ¾¾Colours miscible together:

USE

satin very little 1.25 thixotropic ink water good approx. 20 m²/l with a 49- 70 mesh correctly fixed, it resists domestic washing: cycles to be launched from 30°C to 50 °C cycles excellent on the reverse 3X9394 3Y1598 12 months between 0° and 35°C yes

1) Printing on polyester film for mat transfer 2543600 or siliconed paper 2543300 (*by 250 sheets, size 70 x 50 cm) and 2543600 (by 250 sheets, size 70 x 100 cm). 2) Pre-drying of the dyes: 2 mn at 80°C at pulsed air tunnel 3) Printing of the adhesive (mesh 36 threads/cm). Drying : 2 mn at 50 - 60°C. or use a powder adhesive: - PU 3863328, drying 2 mn at 90°C - PET 3863327, drying 2 mn at 105°C 4) Transfer on textile with a heating press by respecting the following recommendations: - Powder PU pressure 3 to 5 bars temperature 140 - 150°C time 15 to 30 seconds In that case, we advise you not to wash and dry over 60°C. - Poudre PET pressure 3 to 5 bars temperature 150 - 180°C time 20 to 30 seconds 5) Take out the transfer substrate only after complete cooling.

USE

Please respect the following points: Before you start printing pass the transfer paper through the dryer to condition the transfer paper prior to printing. Polymerization of the ink on the transfer support could lead to problems with adhesion to the fabric. Preliminary tests must be carried out to check the resistance of the textile to the press and ensure paper to textile transfer. Adding a big quantity of pigment concentrates (30%) can damage the transfer, particularly if used exposure. Particular case: in case of drying over 60°C - special base 3Y2804 - Powder PU 3Y2911 - Covering white 3524087 to prepare various shades

IMPLEMENTATION

Preparation is required before using this range of inks. The pigment concentrates are used with the thinner base on its own or with the thinner base and the blending white.

BASE

PIGMENT CONCENTRATES Ref.

Packaging

lemon 3522002

Ref.

Packaging

violet 1l

3522016

3524000

3524087

yellow 3522004

3522020

BASE Ref. orange 3522006

mint green 1l

3522035

Packaging

thinner base 1l

3524066

base FOR METALLIC PASTE 3524095 cherry red 3522008

3522044

ADHESIVES Packaging

ADHESIVES 3864041

rubis red 3522012

black

Ref.

Thermofusing powder adhesive Polyester 3863327 3 kg Thermofusing powder adhesive PU 3863328 3 kg

fuschia 3522015

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

primary blue

Storage AND Toxicology

TIFLEX would like to draw your attention to the following points: Before starting production, you are recommended to check the ink compatibility and resistance on a textile by washing the finished article according to the conditions indicated on its label. Washing resistance may be reduced with some dyes rich in base colours or white (transparent or pastel colours). The washing resistance may also be reduced due to fibrillation (fibres projecting through the printing). This phenomenon is independent of ink polymerisation. High washing temperatures associated with powerful detergents may lead to colour changes with some colours.

covering white

The AQUATRANS inks comply with EN 71-3 standard.

Packaging

thinner white

preparation

• Red resist, ruby red and black, 90% base 10% pigmented concentrate. • Lemon, thinner base 37,5%, blending white 60%, 2,5% pigmented concentrate. • Other colours, 20% base, 60% white, 20% pigment concentrates.

Ref.

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

MP. TIFLEX 28.01.2013

SCREEN PRINTING

TEXTILE inks Hydrocolor NG

Acrylic water based ink, formaldehyde FREE for direct printing only on polyester, cotton or blends.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Hydrocolor NG Acrylic water based ink, formaldehyde FREE for direct printing only on polyester, cotton or blends.

SPECIFICATIONS ¾¾Appearance: ¾¾Smell: ¾¾Fixing: ¾¾Solidity: ¾¾Coverage rate: ¾¾Cleaning the equipment: ¾¾Expiry:

USE satin very few - 2 to 3 min. at 160°C in IR tunnel - by cold catalysis with an addition before printing of 5% of catalyst 35A0564; in this case, the catalyzed ink can only be used for 48 h. Caution: covering white, fluo colours and metallised inks must absolutely be cured, since they are not printed with a catalyst correctly fixed, Hydrocolor NG ink resists to domestic washings (cycles for printed fabrics from 30°C to 50°C) varies from 9 to 12 m²/l depending on the screen used and the substrate printed water refer to the label

Hydrocolor NG is printed with a mesh 48 threads/cm and emulsions such as DIAZO T, UST and 200T The thixothropy of the ink can be increased according to the following procedure : add while stiring from 10 g to 25 g of thickener XH 690 in 5 liters of ink then progressively add 25 g of a 25% ammoniacal solution in water. Note that the colour Hydrocolor NG Gold is delivered in two packages: • base for metallic paste 3564095 (in 5 l can) • rich pale gold paste 3562096 (in 1 kg pot) The base and the paste must be mixed just before use in proportions of 85 / 15 by weight. The mixture obtained must be used the same day.

Storage AND Toxicology The HYDROCOLOR NG inks contain no dangerous solvents (in compliance with the Decree dated 21/02/90). They comply with EN 71-3 standard.

STANDARD colours Ref.

Packaging

lemon

Ref.

Packaging

fuchsia

Ref.

Packaging

dark green

35A2002

35A2015

35A2034

35A4002

35A4015

35A4034

gold yellow

violet

35A2004

35A2016

35A2035

35A4004

35A4016

35A4035

orange

olive green

brown*

bright blue

35A2006

35A2020

35A2042

35A4006

35A4020

35A4042

scarlet

royal blue

black

35A2007

35A2024

35A2044

35A4007

35A4024

35A4044

35A2085 35A4085

red

deep blue

thinner white

35A2008

35A2026

35A4008

35A4026

covering white 35A2087 35A4087

dark red

1l 5l 1l 5l

bright green

35A2009

35A2030

35A4009

35A4030

5l Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

*Acrylic water based ink, formaldehyde FREE.

4-COLOURS PROCESS

FLUO

Ref.

Packaging

BASES Packaging

4-colours yellow 35A2050

fluo lemon 35A2070

35A4050

35A4070

4-colours magenta 35A2052

fluo gold yellow* 35A2075

35A4052

35A4075

4-colours cyan 35A2054

fluo orange* 35A2073

35A4054

35A4073

4-colours black 35A2056

fluo red* 35A2071

35A4056

35A4071

fluo pink* 35A2074

35A4074

fluo green* 35A2072

35A4072

Ref.

SPECIAL EFFECT Packaging

thinner base 35A4066

production base 35A4058

Ref. gold paste 3562096

ADDITIVES Ref.

base metallic paste 35A4095

Packaging

catalyst 35A0564

100 g

thickener 35A0263

25 g

TIFLEX would like to draw your attention to the following points: Washing resistance may be reduced with some dyes rich in bases or white (transparent or pastel colours). The washing resistance may also be reduced due to fibrillation (fibres projecting through the printing) with some fabrics. This phenomenon is independent of the ink polymerisation. Before starting production, you are recommended to check the ink compatibility and resistance on a textile by washing the finished article according to the conditions indicated on its label.

*Acrylic water based ink, formaldehyde FREE.

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

Non contractual colours and pictures - IMP. TIFLEX 28.10.2012

SCREEN PRINTING

textile ink Discharge ink Water based ink composed of a base (coloured or not) and an additive.

SCREEN PRINTING

Discharge ink (base + additive) removes the back dye of a cotton fabric.

* making an impression

SCREEN PRINTING

Discharge ink Water based ink composed of a base (coloured or not) and an additive. Discharge ink (base + additive) removes the back dye of a cotton fabric. The addition of a pigment concentrate to this preparation allows to replace the initial dying by a new one. Acting as a decoloration/dying process, the printed areas has no touch and does not require a underlayer of white on dark fabrics. CAUTION: only some textile back dyes can be removed with discharge inks. So please check with the fabric manufacturer if the fabric could match with the discharge ink (we strongly advise you to perform some tests).

SPECIFICATIONS ¾¾Water based acrylic base ¾¾pH: 8-9 ¾¾Ionic character: anionic/non ionic ¾¾Pot life: 8 hours after adding the additive

colours They can be obtained by mixing the base.

PREPARATION OF THE colours MIX: 2% to 5% pigment concentrate to 98-95% base. The colour preparation has to be done prior to the addition of additive.

USE Before use, the additive must be mixed with the base or with the coloured base and pigment or with white colour in the following proportions: On clear substrates Base or white or coloured base: 850g Additive: 50g On dark substrates Base or white or coloured base: 850g Additive: 100g The additive must be perfectly mixed with the base or colours. After printing, the fabrics must not be stored for more than 2 hours at ambient temperature to ensure that the active product does not penetrate more into the fabric and does not bleach a larger area more than expected. Drying: 2mn at 160°C. Thinner: It will need to be diluted, if necessary, with maximum 5% of water. Cleaning the screens: Water Screen: 36 to 77 threads/cm Emulsion: 200T (resistant to water based inks).

PIGMENT CONCENTRATES Ref.

Packaging

yellow 3522004

3754000

primary blue

base

3522020

3754058

3522035

Packaging

4.250 l

additive 1l

3751264

250 g

black

CHERRY red 3522008

3522016

Ref. white

mint green

orange 3522006

Packaging

violet

lemon 3522002

Ref.

STANDARD colours

3522044

3522012

fuschia 3522015 BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP. TIFLEX 28.01.2013 - Non contractual pictures

rubis red

TEXTILE inks Polythane

If offers a strong covering power and high flexibility required for folding and bending operations. Air drying ink intended for printing on fabrics and especially thick synthetics, used mainly to make bags, covers, cases, clothing, etc...

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Polythane If offers a strong covering power and high flexibility required for folding and bending operations. Air drying ink intended for printing on fabrics and especially thick synthetics, used mainly to make bags, covers, elastomer TPU, cases, clothing, etc... By adding Plastisol adhesives, thermofusing Oekoflash or thermofusing adhesive powder, Polythane ink mixed with catalyst XF 822 can be applied by transfer on bags or working cloths. SPECIFICATIONS ¾¾Appearance: ¾¾Average density: ¾¾Viscosity: ¾¾Drying: • ambient air • air jet dryer ¾¾Pot life of the ink + catalyst mixture: ¾¾Opacity: ¾¾Coverage rate: ¾¾Weather resistance: ¾¾Light fastness: ¾¾Solvents: • thinner • retarder ¾¾Cleaning solvents: • manual • washer ¾¾Storage and expiry:

utilisation satin 1,30 38 ± 5 Pa.s

POLYTHANE ink can be used on most substrates made from synthetic fabric, using screens ranging from 21 to 90 threads/ cm.

30 min. at 20°C 2 min. at 60°C 12 hours excellent 25 m²/kg with a 48 mesh good good

We recommend you to check the ink compatibility and resistance on a textile by washing the printed item according to the specifications written on its label.

4905 4906

We advise you to check the following parameters with several washing resistance tests.

2891, NS-81, NS-91 and NS-99 2881, 2899, NS-81, NS-91 and NS-99 refer to the label

For ordinary use where no specific resistance is required it can be used without catalyst. When increased resistance is required (adherence, flexibility, weather resistance), add to the POLYTHANE ink 10 % by weight of hardener XF 822. When printing on textile which will be washed in domestic washing machines, it is essential to use catalyst XF 822.

This ink combined with a catalyst allows you to print working cloths by direct printing or by transfer (contact us for more informations). Printing by transfer You must use a powder adhesive for printing transfer. Polythane ink, combined with 10% of hardener XF 822 (representing 10% of the ink weigh), will be fixed on a matt polyester film for transfer ref 2543600 Pre-gelling: ambient air or in the tunnel (1 min at 110°C after letting an adhesive powder) Printing transfer: pressure 3 to 5 bars, temperature: 170°C - 190°C.

Storage AND Toxicology The POLYTHANE inks comply with EN 71-3 standard.

EXTRA OPAQUE

STANDARD colours Ref.

Packaging

lemon OP 3472002

1 kg

gold yellow OP 3472004 1 kg

orange OP

Ref.

Packaging

yellow

3472048

3472087

1 kg

deep blue 3472050

1 kg

cherry red OP

deep green OP

3472008

3472034

1 kg

cyclamen 3472039

1 kg

3472088

1 kg

green 3472089

1 kg

white 3472085

1 kg

black 1 kg

3472072

1 kg

white

violet 3472042

Packaging

red

medium green OP 3472033 1 kg

3472006

Ref.

primary blue

1 kg

3472012

1 kg Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

SCREEN PRINTING

4-COLOURS PROCESS THIXO

BASES

Ref.

Packaging

4-colours yellow thixo 3472051 1 kg

4-colours base thixo 3472058

4-colours magenta thixo 3472052 1 kg

thinner base 3472084

4-colours black thixo 3472056

1 kg

Ref. retroreflective 3472075

ADDITIVES Packaging 1 kg

1 kg

Ref.

Packaging

catalyst XF 822 3470503

100 g

gelifying agent 3952061

1 kg

gelifying agent 3470590

100 ml

gelifying agent 3472090

1 kg

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

Non contractual colours and pictures - IMP. TIFLEX 28.01.2013

4-colours cyan thixo 3472054

special effect Packaging

Textile transfer Printing of the reversed patern on the silicon paper.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Textile transfer ADDITIONAL PRODUCTS

USE 1) Printing of the reversed patern on the silicon paper. 2) Pregelling in the tunnel : 1 mn to 100-110°C function of the equipment. Prints are not polymerisded. 3) Transfer on the textile by heating press with these following conditions : pressure 3 to 5 bars, temperature : 170-190°C, time 20 - 30 s. 4) Take off the silicon paper after total cooling. N.B. : For a better adherence on the textil, use adhesive powder (ref. 3863327). Using advices: • Put the paper with blanks in IR tunnel before starting printing. • For a transfer application, ink polymerisation on the paper would bring defects for textil transfer. • Test textil resistance under the press and also for transfer from paper to textil. Advantage polyester versus paper: transparency and thermic stability. Advantage of polyester film over siliconed paper: shiny polyester film can be used as a surfacing film in order that your direct printings or transfer printings get a glazed finish. Concerning the transfer of AQUATRANS, DREAMFLASH and POLYTHANE inks, please refer to the related pages describing each of them.

Ref.

Packaging

thermofusing plastisol adhesive 3864021

Ref. hot-melt film (Mylar) in 0,75 x 125 m roll gold 25B2100 silver 25B2200

thermofusing plastisol adhesive white

silicone paper, 105 gr/m² per 250 sheets

70 x 50 cm

2543300

3864022

70 x 100 cm

2543400

mat high

2543600 2543500

thermofusing Oekoflash adhesive 3864031

white adhesive Everest 39C4098

polyester film for transfer, size 70 x 50 cm per 200 sheets

tRANSLUCID ADHESIVE EVEREST 39C4099

3863327

3 kg

powder for transfer to add to the inks (max 10%) 3863317

3 kg

The references ADHESIVE OEKOFLASH THERMOFUSING, ADHESIF POWDER THERMOFUSING and POWDER TRANSFER comply to OEKOTEX Standard Class 100 -1 for baby articles.

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

No contractual pictures - IMP. TIFLEX 28.01.2013

thermofusing powder adhesive POLYESTER

Use of white plastisol inks SCREEN PRINTING

* making an impression

SCREEN PRINTING

white plastisol TECHNICAL CHARACTERISTICS

WHITE plastisol range

REFERENCE

DENSITY

PRINTABILITY

OEKOTEX 100/1

FC WHITE

3964012

1,6

FC FLASH CURE

3964010

1,6

LAYER

FC EXTRA OPAQUE

3964078

1,5

NEED A GOOD KNOW-HOW

VERY OPAQUE

FC MAT EXTRA OPAQUE

3964077

1,5

NEED A GOOD KNOW-HOW

VERY OPAQUE AND MAT

ELASTIC

3954000

1,59

ELASTICITY

YES

KILIMANJARO

3954010

1,56

EASY

BLUISH ASPECT

HIGH SPEED

3954011

1,62

NEED A GOOD KNOW-HOW

EXCELLENT FLASH CURE CHARACTERISTICS

YES

EVEREST

3954070

1,6

EASY

VERY OPAQUE AND ESAY TO PRINT

YES

OE WHITE

3934000

1,57

OE ECLAIR

3934086

1,53

LAYER

YES

OE EXTRA OPAQUE

3934082

1,6

NEED A GOOD KNOW-HOW

VERY OPAQUE

YES

COLOR LC

3Y1676

1,55

THERMOFUSING PLASTISOL ADHESIVE

3864022

1.4

NO THERMIC STABILITY

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP. TIFLEX 22.10.2012

YES

special product for textile - glossy ELASTIC base - FLASHCOLOR Soft thinner base - FLASHCOLOR pearl base - PUFF transfer base - PLASTISOL expansible base - base for PLASTISOL shiners - glue for shiners - gelling agent - elastic white - FLASHCOLOR high opacity white - FLASHCOLOR matt high opacity white

SCREEN PRINTING

* making an impression

SCREEN PRINTING

glossy elastic base Reference in 1 l: 3954091 This base retains its flexibility even in the case of large deposits. The quantity of product deposited will be a function of the mesh and the screen’s coated. The most interesting results are obtained using a cloth from 68 – 64 to 100 – 40 and 400 µ thick capillary films. This base can be used pure or in a mixture with Flashcolor ink, depending on the results required. - Shiny transparent printing: In this case the shiny elastic base is used on its own. It gives different effects, for example the “plastic” varnish, drop of water effect, depending on the way in which it is deposited. It is polymerized at 160°C. The time it spends in the tunnel depends on the thickness deposited. For the transfer, use a mixture of the Flashcolor blending base + plastisol shiny base in a 70/30 ratio by weight. Application and transfer are done under the usual conditions. Depending on the paper used, the surface is either satin or glossy. - “Tar” and anti-slip pin printing: If the shiny elastic base is mixed with Flashcolor or Oekoflash colours, it increases their shininess and elasticity. Once again, the extent of the deposit will depend on the screen’s coating. It is polymerised under the usual conditions taking the deposit into account. - Shiny base and shiners printing: Shiners can be incorporated into the shiny base and the mixture screen printed on the cloth using a 10 to 21 threads/cm mesh screen depending on the particle size of the shiners used. It is polymerised under the usual conditions taking the deposit into account. Shiners can also be transferred using the following mixture by weight, for example: - Flashcolor thinner base: - glossy elastic base: - shiners:

60 20 20 --100

The mixture applied to transfer paper, pregelled and transferred under the usual press conditions (temperature 170 - 190°C, 10 to 30 seconds action time and 3 to 5 bars pressure). Depending on the paper used, the surface is either satin or glossy. - Elastic cloth printing: The glossy elastic base is mixed in a 30 to 40% ratio with a Flashcolor or Oekoflash ink. It is polymerized by passing through an IR tunnel (2 minutes at 160°C). The addition of 5% XD 150 catalyst reduces the polymerisation temperature by 15 to 20°C. The shiny elastic base is also used for printing in thick layers. It then preserves the flexibility of the printed areas. In this precise case, you are strongly recommended to use XD 150 hardener in order to ensure complete polymerisation.

FLASHCOLOR SOFT THINNER BASE Reference in 1 l: 3962006 - Reference in 5 l: 3964006

This thinner base reduces the viscosity of the ink and consequently its feel on the printed textile. It is mixed in a proportion of from 10 to 20% with the Flashcolor inks with the exception of the four-colour process tints. Usual polymerisation: 2 minutes at 160°C. It is not used alone.

FLASHCOLOR pearl base Reference in 1 l: 3962007 - Reference in 5 l: 3964007 This base gives a pearl effect to the ink applied. The Flashcolor ink is mixed with the pearl base in a maximum ration of 5%. It is used on a white ground and applied with a 21- 140 WPW screen. Usual polymerization: 2 min. at 160°C.

PUFF transfer base Reference in 5 l: 3954094

“Puff” transfers already exist in the U.S.A. but the “puff” base is an innovation because it allows screen printers to create their transfer plates themselves. This base is used blended with the inks or the Flashcolor base and must not make up more than half of the mixture. The mixture is then applied either directly on silicon coated paper or on the Flashcolor print already present on the transfer paper. The screen is chosen in accordance with the effect required. The “puff” transfer is pregelled under the usual conditions: 30 to 60 seconds at 105/110°C (to be determined by testing). - Transfer conditions: - top plate temperature: 190°C - pressure: 5 to 6 bars - time: 4 to 10 seconds The transfer conditions are determined by testing. A compromise between expansion and solidity of the transfer must be found. - Result: You get a pattern that stands out in relief with a smooth soft surface. The relief effects will be optimised by restrictions on the printing.

PLASTISOL expansible base Reference in 1 l: 3952090 - Reference in 5 l: 3954090

Mixed with a Flashcolor ink, this base gives a swollen (3D) effect to the ink after polymerisation. The mixture contains a maximum proportion of 50% base. Usual polymerisation: 2 min. at 160°C. The expanded volume is a function of the mesh used (traditional expansion: 21 threads). It is very important to determine a time and temperature according to your material in order to get the best expansion possible.

Base for shiners Reference in 5 l: 3954096

The shiners are mixed with the base in the following proportions : 80 g of base, 20 g of shiners. The preparation obtained is printed with a screen whose mesh is suited to the size of the shiners (foe example, 21 threads for 100 microns, 10 threads for 200 microns). Usual polymerisation: 2 min. at 160°C.

SCREEN PRINTING

glue for shiners Reference in 5 l: 3964099 The glue is applied with 14 to 36 threads/cm screens. The mesh count is chosen according to the textile substrate’s absorbency. The print is then sprinkled with shiners. At this stage, a calendaring of the surface increases the adhesion of the shiners. It is polymerised by passing through an IR tunnel (2 minutes at 160°C) or an oven. The screens are cleaned using solvent 2881 or 2899.

gelling AGENT Reference in 1 kg: 3962097 To obtain a high density ink, mix the gelling agent with a Flashcolor ink in a proportion of 0.5 to 2% in weight. It must be agitated mechanically. The mixture obtained can be used after resting for 24 hours (time necessary for thickening).

ELASTIc white Reference in 5 l: 3954000 This glossy ink is used for applications on stretchy substrates.

FLASHCOLOR high opacity white High cover glossy white. The opaqueness depends on the deposit of ink. Usual polymerisation (2 min. at 160°C).

Reference in 5 l: 3964078

FLASHCOLOR matt high opacity white Reference in 5 l: 3964077

TIME

TEMPERATURE

RESULTAT

2 min 2 min 2 min 2 min 2 min 2 min 2 min 2 min

110°C 120°C 130°C 140°C 150°C 160°C 170°C 180°C

glossy look matt look slight expansion very slight expansion matt look matt look matt look glossy look

The recommended time and temperature for complete polymerisation are 2 min at 160°C. If a heavy deposit is made, it will obviously be necessary to increase the time of the pass at this temperature.

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

Images non contractuelles - IMP. TIFLEX 11.02.2013

High cover mat white. The opaqueness depends on the deposit of ink. It polymerisation has an effect on its appearance:

UV inks UViprim CV

Ink with UV drying intended for printing on rigid PVC, self-adhesive supports and polycarbonate. It is also used for printing on PLV cardboard.

SCREEN PRINTING

* making an impression

STANDARD colours

UViprim CV Ink with UV drying intended for printing on rigid PVC, self-adhesive supports and polycarbonate. It is also used for printing on PLV cardboard.

POLYMERIZATION

SPECIFICATIONS ¾¾Appearance: ¾¾Average density: ¾¾Viscosity: ¾¾Covering power: ¾¾Coverage rate: ¾¾Weather resistance: ¾¾Light fastness: ¾¾Thinner: ¾¾Cleaning solvents: ¾¾Expiry:

glossy 1.05 3.5 ± 0.5 Pa.s poor except WHITE and BLACK 100 m²/kg with a 180 -31 mesh good very good 31960 max. 5 % 2881, 2891 NS-81 and NS-91 refer to the label

The polymerization speed depends on several parameters, particularly the printed thickness, the opacity, the colour and the type of support, the type and number of UV lights. Due to the various configurations proposed, tests are required before starting prining. The white colour and the tints (containing white) cure more slowly. To obtain a good adherence, the ink must be polymerized correctly. For superposition of layers, the 1st layer must not be overpolymerized. In addition, the adherence between the various colours must be checked from time to time during the process.

Ref.

Packaging

lemon* 3452012

The UViprim CV inks are used at standard viscosity or slightly diluted (5 %) and printed with mesh from 150 to 180 fibres/cm. To obtain correct opacity, we recommend you to add from 10% to 20 % of THINNER WHITE to the basic colours. COVERING WHITE or EXTRA OPAQUE WHITE cannot be mixed with other colours and are printed as a single colour. The textured varnish gives a grained finish on front sides and polycarbonate and polyester keyboards. This varnish will be diluted with 10 % of solvent 31960 and printed with a mesh from 77 to 90 fibres/cm. For Priplak® and Akilux® type Corona treated polypropylene, mix the ink with 5% catalyst 3822090 (representing 5% of the ink weigh). Since the Corona treatment has a limited lifetime, please check the surface condition of the substrate before printing.

1 kg

The UViprim CV inks comply with EN 71-3 standard. Storage duration: 18 months in its original packaging, between 10 and 30°C, stored away from any source of heat and out of direct sunlight.

1 kg

process blue*

3452014

3452051

1 kg

Ref.

Packaging

4-colours yellow 3452081

1 kg

4-colours magenta 3452084

1 kg

4-colours cyan 3452085

1 kg

4-colours black 3452086

1 kg

4-colours thinner base 3452080 1 kg

FLUO orange* 1 kg

3452017

reflex blue*

Ref.

3452025

fluo yellow 3452091

1 kg

fluo orange 3452093

1 kg

fluo red 3452094

1 kg

fluo pink 3452095

1 kg

fluo green 3452096

1 kg

emerald green* 1 kg

3452061

cherry red*

black*

3452018

3452044

1 kg

3452041

1 kg

Packaging

BASE 1 kg

Ref. thinner base 3452008

cyclamen*

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

3452043

gold yellow*

3452021

Storage AND Toxicology

Packaging

violet*

scarlet*

USE

4-COLOURS PROCESS Ref.

thinner white* 3452003 1 kg covering white 3452002 1 kg extra opaque white 3452005 1 kg

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

Packaging 1 kg

ADDITIVES Ref.

Packaging

texture varnish 3454098

catalyst 3822090

MP. TIFLEX 28.01.2013

SCREEN PRINTING

e e r F P V N

UV inks UViprim VY

UV curing ink intended for printing on rigid PVC, self-adhesive supports and polycarbonate. It is also used for printing on PLV cardboard.

SCREEN PRINTING

* making an impression

STANDARD colours

UViprim VY UV curing ink intended for printing on rigid PVC, self-adhesive supports and polycarbonate. It is also used for printing on PLV cardboard.

POLYMERIZATION

SPECIFICATIONS ¾¾Appearance: ¾¾Average density: ¾¾Viscosity: ¾¾Coverage rate: ¾¾Weather resistance: ¾¾Light fastness: ¾¾Specific resistance: ¾¾Thinner: ¾¾Cleaning solvents: ¾¾Expiry:

glossy 1.05 3.5 ± 0.5 Pa.s 90 m²/kg with a 165 -34 mesh good very good alcohol, petrol 3194058 max. 5 % 2881, 2891 NS-81 and NS-91 refer to the label

The polymerization speed depends on several parameters, particularly the printed thickness, the opacity, the colour and the type of support, the type and number of UV lights. Due to the various configurations proposed, tests are required before starting prining. The white colour and the tints (containing white) cure more slowly. To obtain a good adherence, the ink must be polymerized correctly. For superposition of layers, the 1st layer must not be over polymerized. In addition, the adherence between the various colours must be checked from time to time during the process.

Ref.

Packaging

lemon*

The UViprim VY range is intended for printing on rigid PVC, selfadhesive foils, polycarbonate, paper and cardboard.. Good results have been obtained on pre-treated polypropylene like Priplak® or Akylux by mixing the ink with 5% of hardener. The mixture is stable for 12 hours at 20°C.The efficiency of the hardener can be observed 24 hours after printing. Since the Corona treatment has a limited lifetime, please check the surface condition of the substrate before. Ready to use, we recommend a mesh between 140 to 180 threads/cm. To obtain correct opacity, we recommend you to add from 10% to 20 % of THINNER WHITE to the basic colours. COVERING WHITE or EXTRA OPAQUE WHITE cannot be mixed with other colours and are printed as a single colour.

Storage AND Toxicology The UViprim VY inks comply with EN 71-3 standard. Storage duration: 1 year in its original packaging, between 10 and 30°C, stored away from any source of heat and out of direct sunlight. The UViprim VY do not contain vinyl pyrrolidone.

NVP Free

38C2002

1 kg

38C2016

1 kg

38C4002

5 kg

38C4016

5 kg

gold yellow*

process blue*

38C2004

1 kg

38C2027

1 kg

38C4004

5 kg

38C4027

5 kg

orange*

reflex blue*

38C2006

1 kg

38C2025

1 kg

38C4006

5 kg

38C4025

5 kg

emerald green*

38C2007

1 kg

38C2033

1 kg

38C4007

5 kg

38C4033

5 kg

cherry red*

black*

38C2008

1 kg

38C2044

1 kg

38C4008

5 kg

38C4044

5 kg

cyclamen* 38C2014 38C4014 BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

Packaging

violet*

scarlet*

USE

4-COLOURS PROCESS Ref.

1 kg 5 kg

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

thinner white* 38C2085 1 kg 38C4085 covering white 38C2087 1 kg 38C4087 extra opaque white 38C2080 1 kg 38C4080

Ref. Packaging 4-colours yellow 38C2050 1 kg 38C4050 5 kg 4-colours magenta 38C2052 1 kg 38C4052 5 kg 4-colours cyan 38C2054 1 kg 38C4054 5 kg 4-colours black 38C2056 1 kg 38C4056 5 kg 4-colours thinner base 38C2057 1 kg 38C4057 5 kg

FLUO Ref. fluo yellow 38C2070 38C4070 fluo orange 38C2073 38C4073 fluo red 38C2071 38C4071 fluo pink 38C2074 38C4074 fluo green 38C2072 38C4072

BASE

Ref. thinner base 38C2066 38C4066

ADDITIFS

Ref.

catalyst 3822090

Packaging 1 kg 5 kg 1 kg 5 kg 1 kg 5 kg 1 kg 5 kg 1 kg 5 kg

Packaging 1 kg 5 kg

Packaging 1l

MP. TIFLEX 28.01.2013

SCREEN PRINTING

NVP free

UV inks UViprim Ă&#x2030;co plus Ink with UV drying dedicated for printing on papers, cardboards, PVC for PLV. NVP FREE.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

UViprim Éco plus Ink with UV drying dedicated for printing on papers, cardboards, PVC for PLV. NVP FREE.

SPECIFICATIONS

POLYMERISATION

¾¾Appearance:

glossy

¾¾Average density:

1.15

¾¾Viscosity:

5 ± 1 Pa.s

¾¾Coverage rate:

100 m²/kg with a 150 - 31 mesh

¾¾Weather resistance:

good

¾¾Light fastness (scale from 1 to 8):

very good except for indoor applications

¾¾Thinner:

31970NG (without NVP): 10% max.

¾¾Cleaning solvents:

2881, 2891, NS-81 and NS-91

¾¾Expiry:

refer to the label

USE UViprim ECO Plus ink has been formulated in order to print on the following sustrates: • vinyl adhesive • paper, cardboard • supple and stiff PVC • treated polypropylen Priplak type (with 10% of hardener 3822090). The new UViprim Eco Plus ink allows multi layer printings without weakening the substrate. Main characteristics are: • ready to use inks • highly glossy • high reactivity • large suppleness allowing the cutting in the ink film • good resistance from outside

The opaque white must be used alone whereas, diluting white can be used with other colourings with a 10 to 20% rate in order to get a correct opaqueness. The UViprim Eco Plus ink is used at delivery viscosity or slightly diluted, with 150-34 fabrics. The line colours polymerise between 20 and 40 m/min on PVC, in 150-34 under an 80 W/cm lamp. On paper, under the same conditions, the passage speeds are halved. As the chemical reaction continues, it is better not exceed 24 hours between each layer. Moreover, adherence between the different colours,sometimes, must be check. The polymerization speeds depends on the thickness deposited, the colour and the type of substrate, the type and number of UV lamps. Due to the various printing configurations, it will better to perform some tests. Good results have been obtained on Priplak® and Akilux® treated polypropylene by mixing the ink with 10% of hardener 3762060. Since the Corona treatment has a limited lifetime, check the surface condition of the substrate before printing. The mix combining the ink and the hardener mix is stable during 8 hours. Adherence and scratch resistance will be obtained after 24 hours (you must make some test before working on long runs of printings).

COMPLEMENTARY PRODUCTS

Photoinitiator 3X6717: it improves the adherence with a better drying depth of the ink film.It can be use with all of the colours excepted the opaque white and the thinner base with a 1% to 5% weight proportions. Photoinitiator 3X8907: it improves the surface’s hardness and allows to increase the brightness. Required ratio : 1% to 4 % of the ink weigh.

Storage AND Toxicology The UViprim Eco Plus inks comply with EN 71-3 standard. Storage duration: 1 year in its original packaging, between 10 and 30°C, stored away from any source of heat and out of direct sunlight.

NVP FREE

STANDARD colours FOR OUTDOOR APPLICATION Ref.

Packaging

STANDARD colours FOR INDOOR APPLICATION Ref.

resist lemon yellow

violet

3844002RNG

3844016NG

5 kg

gold yellow 3844004NG

5 kg

resist scarlet 3844007RNG

5 kg

resist red 3844008RNG

5 kg

Packaging

3844002NG

5 kg

orange

3844022NG

5 kg

3844006NG

5 kg

scarlet

3844028NG

5 kg

3844007NG

emerald green

red

3844033NG

3844008NG

5 kg

black

cyclamen 3844014NG

5 kg

royal blue 5 kg

Ref.

lemon yellow

blue

resist orange 3844006RNG

Packaging

5 kg

green

3844044NG

5 kg

3844032NG

5 kg

thinner white 5 kg

3844000NG

5 kg

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

SCREEN PRINTING

4-COLOURS PROCESS THIXO

OPAQUE

Ref.

Packaging

4-colours yellow 3844050NG

5 kg

3846050NG

25 kg

4-colours magenta 3844052NG

5 kg

3846052NG

25 kg

BASE Packaging

opaque white 3844080NG

5 kg

opaque black 3844081NG

5 kg

Ref. thinner base 3844058NG

5 kg

3846054NG

25 kg

4-colours black 3844056NG

5 kg

3846056NG

25 kg

5 kg

ADDITIVE Ref.

4-colours cyan 3844054NG

Packaging

catalyst 3822090

Packaging 1l

4-colours thinner base 3844057NG 5 kg 25 kg

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP. TIFLEX 28.01.2013. Non contractual colours and pictures.

3846057NG

free P V N

UV inks UViprim FL Ink with UV drying dedicated to printings on rigid or semi-rigid bottles of flamed polyethylene or polypropylene. NVP FREE.

SCREEN PRINTING

* making an impression

STANDARD colours

UViprim FL Ink with UV drying dedicated to printings on rigid or semi-rigid bottles of flamed polyethylene or polypropylene. NVP FREE. SPECIFICATIONS ¾¾Covering power: ¾¾Resistance to light: ¾¾Cleaning solvents:

Ref.

Packaging

lemon* 3762002

OPAQUE Ref.

Packaging

violet* 1 kg

3762016

1 kg

POLYMERIZATION

80 m²/kg with a 165 – 34 fabric very good 2881, 2891 and NS91

PROPERTIES

Glossy finish Highly reactive Rheology suitable for high printing speeds Excellent stability in the screen

SUBSTRATE TREATMENT

UViprim FL is formulated to print on PE and PP used in the bottle industry. The surface tension is very low, it is necesarry to flame the substrate before printing (minimum 42mN/m). The surface to be printed needs to be clean without grease particles

UViprim FL is a highly-reactive single-component ink. Under a lamp of 160 – 200 W/cm, the ink cures at a rate of between 2500 and 4000 units per hour. The tape resistance test should only be performed after the complet cooling of the bottle at ambient temperature. The overlaying of colours must be done in line on multicolour printing machine. Adding 5% of hardener (representing 5% of the ink weigh) improves water resistance and solvents resistance, as well as encouraging a better adherence to difficult substrates. The effectiveness of the hardener can be observed 24 hours after printing. The combination of the ink and the hardener mixture stable for 8 hours. The speed of curing depends on numbers of parameters, including the thickness deposited and the opacity, colour and nature of the substrate. Due to the various printing configurations, testing is essential before each new printing run. Screens: The mesh required will be from 140 to 180 threads/cm. Dilution: UViprim FL inks are ready to use. If the viscosity nevertheless needs to be reduced, the required thinners will be: 31960 ( with NVP ): maximum 5% 31965 ( without NVP ): maximum 5%

Storage AND Toxicology The UViprim FL inks comply with EN 71-3 standard. Storage duration: 1 year in its original packaging, between 10°C and 30°C. They must be stored away from a source of heat and out of direct sunlight.

NVP FREE

gold yellow*

process blue*

3762004

3762027

Packaging

opaque white 3762080

1 kg

opaque black 3762081

1 kg

BASE Ref. orange* 3762006

reflex blue* 1 kg

3762025

1 kg

thinner base 3762066

Packaging 1 kg

ADDITIVE Ref. scarlet* 3762007

emerald green* 1 kg

3762033

1 kg

cherry red*

black*

3762008

1 kg

3762044

1 kg

thinner white* 3762085

1 kg

cyclamen* 3762014

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

1 kg

Ref.

catalyst 3822090

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

Packaging 1 kg

MP. TIFLEX 03.06.2013

SCREEN PRINTING

NVP FREE

UV inks UViprim GL

The mono-component UViprim GL range is based on a DUAL CURE system (UV light + hot air). It is dedicated to a high speed screen printing on glass, with or without coating, for interior use. NVP FREE.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

UViprim GL The mono-component UViprim GL range is based on a DUAL CURE system (UV light + hot air). It is dedicated to a high speed screen printing on glass, with or without coating, for interior use. The dual cure system makes these inks insensitive with the extra thickness obtained on objects having a broad dimensional tolerance. Most of all, Uviprim GL inks are shinny, opacity, highly reactivite and chemically resistant. NVP FREE.

SPECIFICATIONS

USE

¾¾Appearance:

glossy

¾¾Average density:

1,5

¾¾Viscosity:

2 - 3 Pa.s

¾¾Opacifying power: • Coloriflex system: • Opaque inks: • White, black:

low excellent excellent

¾¾Coverage rate:

75 m²/kg with a 100 mesh

¾¾Thinner:

31965, 5 % maxi

¾¾Cleaning solvent:

2891, 2899, NS-91 and NS-99

¾¾Expiry:

refer to the label

Preparation of ink: This ink is ready to use. However, some adjustments may be necessary according to the conditions for application and the desired aspect: THINNER : 5% maxi. CUTTING BASE: its use in inks to dilute the colour while it increases the transparency and the reactivity of the mix as well. OPALESCENT BASE: its use in inks to dilute the colour while increasing the reactivity and opalescence by transmission with a loss of brilliance. METALLIC INKS: to use the diluting base with our metallic pastes in a 85/15 or 80/20 proportion. The pot-life of the blend is of 4 hours. Choice of the mesh: Directly function of the printing speed and the required opacity. Generally, we will use a 165, 150, 140 down to 120 mesh fabric tended to 16N. The diameter of the wire will be selected to obtain the best compromise between the deposit, the solidity and the definition. Our inks can stand heavy cycles of dishwashing, alcohols tests and G1 test blend.

SUPPORTS AND PRETREATMENTS

The quality of glass and its chemical structure are related to its manufacturing method. Its surface quality will have to be perfect i.e. free from release agent or any other residue (finger marks, dust, grease, silicone etc). Untreated glass: A flame treatment (surface tension > 44 mN/m) according to the UVitro® process (trade mark of ISIMAT GmbH) is necessary to obtain maximum performances. Coated glass: Many glass containers are covered with a water or solvent-based coating to modify the surface aspect (colour, opalescent, scratch resistance…): a flame treatment, right before printing, is then essential to obtain a sufficient surface tension and thus a good adherence.

POLYMERIZATION

Being based on a DUAL CURE system, this ink dries in two steps: under UV light, to obtain a dry ink surface and to authorize the immediate overprinting of it, and with hot air to obtain optimal chemical and physical resistances. UV DRYING: at a printing speed of 3600 prints/h, use a lamp of 180-200W/cm minimum. HOT AIR DRYING: only one 20 min at 165°C passage for the whole of the decoration. The performances of the system are function of the material and the products used. Its industrial validation is imperative before final production run.

Storage and Toxicology The UViprim GL inks comply with EN 71-3 standard.

NVP FREE

STANDARD colours COLORIFLEX SYSTEM Ref.

Packaging

lemon 3782002

EXTRA OPAQUE Ref.

Packaging

violet 1 kg

3782016

gold yellow

blue

3782004

3782020

1 kg

orange 3782006

scarlet 3782007

1 kg

3782032

3782082

1 kg

opaque orange 1 kg

3782083

1 kg

opaque red 1 kg

3782084

1 kg

opaque green 1 kg

3782085

1 kg

opaque black 1 kg

cyclamen 3782014

1 kg

green

red 3782008

3782028

Packaging

opaque lemon

royal blue 1 kg

Ref.

3782081

1 kg

opaque white 1 kg

3782080

Non contractual colours and pictures

1 kg

SCREEN PRINTING

4-COLOURS PROCESS Ref.

TINTING Packaging

Ref.

BASE Packaging

4-colours yellow 3782050

1 kg

tinting white 3782042

1 kg

4-colours magenta 3782052

1 kg

tinting black 3782044

1 kg

4-colours cyan 3782054 4-colours black 3782056

Ref. thinner base 3782066

ADDITIVES Packaging

Ref.

Packaging

opalescent varnish 3782068

1 kg

Etching varnish 3782069

1 kg

window varnish 3782067

1 kg

gelifyling agent 3952061

1 kg

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP. TIFLEX 28.01.2013. Non contractual colours and pictures.

Also available in metallic, pearlescent, fluorescent, iridescent, two-tones, etc ... shades. Please, contact us for details.

NVP FREE

UV inks UViprim MS

UV drying ink designed for PVC self-adhesive printing, rigid PVC, polystyrene, treated polyester and polycarbonate. NVP FREE.

SCREEN PRINTING

* making an impression

STANDARD colours

UViprim MS

UV drying ink designed for PVC self-adhesive printing, rigid PVC, polystyrene, treated polyester and polycarbonate. NVP FREE.

Packaging

lemon* 3794002

Ref.

Packaging

violet* 5 kg

3794016

5 kg

POLYMERIZATION

SPECIFICATIONS ¾¾Appearance: ¾¾Viscosity: ¾¾Coverage rate: ¾¾Light fastness: ¾¾Thinner: ¾¾Cleaning solvents: ¾¾Expiry:

Ref.

4-COLOURS PROCESS

glossy 5 ± 1 Pa.s 100 m²/l with a 150 - 34 mesh (scale from 1 to 8) good 31960 (with NVP) 31970 (without NVP) 2881, 2891, NS-81 and NS-91 refer to the label

USE This ink is designed for UV self-adhesive PVC, rigid PVC, polycarbonate, polystyrene, treated Corona Priplak® type polypropylene sheet. 10% of catalyst 3822090 should be added for effective adhesion on certain kind of plastics. The UVprim MS ink is used at a standard viscosity or slightly diluted with mesh in the screen mesh 150 to 180 fibres/cm.

Covering white is used alone as a white ink, whereas the thinner white can be mixed with other colours in a proportion of 10% to 20% to obtain the correct opacity. Fusion temperature speeds depend on the thickness deposited, the colour and the type of substrate, the type and the number of lamps. The colours polymerize between 10 and 20 m/min under a 120 W/cm lamp. The tints containing white, like grey cross-link more slowly. Faced with the variety of plastic substrates, a trial is crucial before going into production.

USE OF CATALYST

Good results have been obtained on Priplak® by mixing the ink with 10% of catalyst. Moreover, on certain polyester or polystyrene adding 10% of catalyst gives excellent adherence. The ink & catalyst mixture is stable for 12 hours. Taking the reaction time into account, you have to wait 24 to 48 hours to obtain the best adherence and nail resistance.

gold yellow*

process blue*

3794004

3794027

5 kg

orange* 3794006

5 kg

scarlet*

3794025

4-colours magenta 3794052

5 kg

4-colours cyan 3794054

5 kg

4-colours black 3794056

5 kg

emerald green* 5 kg

3794033

cherry red*

black*

3794008

3794044

5 kg

3794014

5 kg

3794000

Packaging

5 kg

gloss varnish 3794058

5 kg

catalyst 3822090

5 kg

covering white 3794087

additive

mat varnish 3794059

thinner WHITE*

cyclamen*

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

5 kg

reflex blue*

Storage AND Toxicology

NVP FREE

Packaging

4-colours yellow 3794050

Ref.

3794007

The UViprim MS ins inks comply with EN 71-3 standard. Storage time: 18 months in its original packaging, between 10 and 30°C, when stored away from any source of heat and out of direct sunlight.

Ref.

5 kg

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

MP. TIFLEX 28.01.2013

SCREEN PRINTING

free P NV

UV inks UViprim PS

Ink with UV drying, NVP-free, intended for printing on rigid supports such as PVC, various types of polystyrene (high-impact, acrylic resin coated) and its derivates SAN, ABS. NVP FREE.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

UViprim PS Ink with UV drying, NVP-free, intended for printing on rigid supports such as PVC, various types of polystyrene (high-impact, acrylic resin coated) and its derivates SAN, ABS. Suitable on rigid polycarbonate, it also has applications in the bottle industry. NVP FREE. SPECIFICATIONS ¾¾Appearance: ¾¾Average density: ¾¾Viscosity: ¾¾Coverage rate: ¾¾Light fastness: ¾¾Weather resistance: ¾¾Thinner (max. 10 %): ¾¾Cleaning solvents: ¾¾Expiry:

STANDARD colours Ref.

Packaging

lemon* 3802002

4-COLOURS PROCESS Ref.

Packaging

violet* 1 kg

3802016

1 kg

Packaging

4-colours yellow 3802050

1 kg

4-colours magenta 3802052 1 kg

USE gloss 1.05 8 ± 2 Pa.s 100 m²/kg with a 150 - 34 mesh very good good 31965 (without NVP) 31960 (with NVP) 2881, 2891, NS-81 and NS-91 refer to the label

Ref.

The UViprim PS inks are used at standard viscosity or slightly diluted with mesh screens (150 to 180 fibres/cm). To obtain correct opacity, we recommend you to add from 10% to 20% of THINNER WHITE to the basic colours, WHITE 3802000 must be used alone as white ink.

gold yellow*

process blue*

3802004

3802027

1 kg

POLYMERIZATION

The fusion temperature speed depends on several parameters, especially the thickness deposited, the opacity, the colour and the type of substrate. Faced with the numerous installations proposed, tests are essential whenever starting to print. The white and the tints containing white colour will cure more slowly. To obtain good adherence, the ink must polymerized correctly. For superposition, the 1st layer must not be overpolymerized. In addition, the adherence between the various colours must be checked from time to time.

orange* 3802006

reflex blue* 1 kg

The UViprim PS inks comply with EN 71-3 standard. They are non-flammable (high flash point). Storage duration: 2 years in its original packaging, between 10°C and 30°C. They must be stored away from a source of heat and out of direct sunlight.

1 kg

4-colours black 3802056

1 kg

4-colours thinner base 3802057 1 kg

BASE Ref. scarlet*

Storage AND Toxicology

3802025

4-colours cyan 3802054

3802007

emerald green* 1 kg

3802033

1 kg

cherry red*

black*

3802008

3802044

1 kg

thinner white* 3802085

1 kg

thinner base 3802058

Packaging 1 kg

cyclamen* 3802014

1 kg

white BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

3802000

1 kg

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

MP. TIFLEX 28.01.2013

NVP FREE

solvent inks Akilor

Glossy air drying ink intended for printing E-flute polypropylene (Akylux速).

SCREEN PRINTING

* making an impression

SCREEN PRINTING

TECHNOLOGICAL

INDUSTRIAL

SOLUTIONS

Akilor Glossy air drying ink intended for printing E-flute polypropylene (Akylux®), treated by Corona effect (since the duration of this treatment is limited, carry out preliminary tests).

SPECIFICATIONS

USE

¾¾Appearance:

glossy except for fluo colours

¾¾Smell:

few

¾¾Average density:

1.10

¾¾Viscosity:

8 ± 3 Pa.s

¾¾Drying:

• air

15 min. at 20°C with a120 - 34 mesh

• pulsed air

tunnel 30 s at 50/55°C with a 120 - 34 mesh

¾¾Covering power by opacity:

good to very good for black and white

¾¾Coverage rate:

50 m²/kg with a 120 - 34 mesh

¾¾Weather resistance:

good except for fluo colours

¾¾Special resistance:

oil, grease

AKILOR inks are printed on pre-treated polypropylene sheets, used for outdoor short and medium duration signs: construction site panels, display racks, etc. 10 to 30% matting base must be added, depending on the required finish. The mixture Thinner Base/Gold Paste No. 1, 2 and 3 is stable max. 48h. Do not use antistatic agents with these inks; if necessary, use thinner 2899 which will produce this effect. AKILOR inks suit to the printing of fragile plastics as SAC (Styrene Acrylonitrile Copolymer) (preliminary tests recommended).

¾¾Solvents:

• thinner

4909 or 2899 (antistatic effect)

• retarder

4900 or propygel

¾¾Cleaning solvent:

• manual

2881 2891, 2899, NS-81, NS-91, NS-99 and NS-100

• washer

2899, NS-81, NS-91, NS-99, and NS-100

¾¾Expiry:

refer to the label

Storage AND Toxicology The AKILOR inks inks comply with EN 71-3 standard.

STANDARD colours OP Ref.

Packaging

lemon OP* 3882002

Ref.

Packaging

3882016

1 kg

3882042

gold yellow OP*

medium blue OP*

black OP*

3882004

3882022

3882044

1 kg

orange OP* 3882006

1 kg

deep blue OP* 1 kg

3882026

1 kg

cherry red OP*

royal blue OP*

3882008

3882024

1 kg

medium green OP*

3882013

3882032

1 kg

white OP* 3882000

1 kg

cyclamen OP*

deep green OP*

3882014

3882034

1 kg

carmine red OP* 1 kg

Packaging

brown OP*

violet OP* 1 kg

Ref.

1 kg

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

4-COLOURS PROCESS THIXO

FLUO

Ref.

Packaging

BASES Packaging

Ref.

Packaging

thixo 4-COLOURS yellow 3882050 1 kg

fluo lemon 3882070

1 kg

overprint varnis and thinner base 3882058

1 kg

thixo 4-COLOURS magenta 3882052 1 kg

fluo red 3882071

1 kg

matting base 3882065

1 kg

thixo 4-COLOURS cyan 3882054

1 kg

fluo green 3882072

thixo 4-COLOURS black 3882056

1 kg

thixo 4-COLOURS base 3882057

1 kg

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP. TIFLEX 28.01.2013 - Non contractual colours and pictures.

SCREEN PRINTING

solvent inks cellulosique s.t.j. Mat air drying ink intended for printing on polystyrene, A.B.S. and wood.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

STANDARD colours

Cellulosique S.T.J. Matt air drying ink intended for printing on polystyrene, A.B.S. and wood.

¾¾Appearance: ¾¾Average density: ¾¾Viscosity: ¾¾Drying: • air ¾¾Covering power by opacity: ¾¾Coverage rate: ¾¾Weather resistance: ¾¾Solvents: • thinner • retarder ¾¾Cleaning solvents: • manual • washer ¾¾Expiry date:

Packaging

lemon 3422015

Ref.

Packaging

white 1l

3422007

USE matt 1.35 20 ± 2 Pa.s 20 to 30 min. at 20°C depending on the substrate good 35 m²/l with a 100 - 40 mesh medium

S.T.J. CELLULOSIQUE ink has been specially designed for the marking of polystyrene and its copolymers. It is recommended particularly for fine lines (graduation). It can possibly be used with pad printing equipment. Due to insufficient flexibility, it cannot be integrated in thermoforming.

3422022

BASE Ref. cherry red

4906 retargel or 9640 2881, 2891, 2899, NS-81, NS-91, NS-99 and NS-100 2881, NS-81, NS-91, NS-99, and NS-100 refer to the label

gold yellow

3422036

Storage AND Toxicology The CELLULOSIQUE S.T.J. inks comply with EN 71-3 standard.

thinner base and overprint varnish 1l

3422084

medium blue 3422050

bright green 3422057

black 3422077

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

Packaging

IMP. TIFLEX 23.01.2013 . Non contractual colours and pictures.

SPECIFICATIONS

Ref.

solvent inks Epoxy ev

2-component ink offering excellent adherence on glass and metal and exceptional resistance to chemical agents. Not suitable for outdoor use. All colours are formulated with no silicone additive to allow silvering.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Epoxy ev 2-component ink offering excellent adherence on glass and metal and exceptional resistance to chemical agents. Not suitable for outdoor use. All colours are formulated with no silicone additive to allow silvering.

SPECIFICATIONS

USE

¾¾Appearance:

glossy

¾¾Average density:

1.20 for the OP colours and thixo four-colour process

¾¾Viscosity:

8 ± 1 Pa.s

Mix the ink and the catalyst for 15 minutes before printing: pot life 16 hours. 20 % to 30% of the matting base can be used, depending on the required finish.

¾¾Drying:

• air

45 min. at 20°C

• air jet dryer

5 min. at 80°C (can be handled)

¾¾Curing:

30 min. at 160°C (complete polymerization)

¾¾Covering power by opacity:

good

¾¾Coverage rate:

45 m²/kg with a 100 -40 mesh

¾¾Special resistance after polymerization:

bases and solvents

Catalyst

Use

Dose for use

2606

Thixotropic doesn’t reduce the viscosity of the inks.Idem XE 606.For glass with 2.5% agent 3320289:curing of 30 mn at 160°C

Inks and mat base : 100 Catalyst : 10 Overprint varnish : 100 Catalyst : 15

¾¾Solvents:

• thinner

2899

• retarder

4906, 4921 and NS-99

XG 800

Inks and mat base : 100 Gives build and improves the adherence Catalyst : 20 in some difficult cases. Overprint varnish : 100 Catalyst : 30

¾¾Cleaning solvent:

• manual and washer

¾¾Expiry date:

2899 and NS-99 refer to the label

6969

The moire reactive with low temperatures, the more polyvalent. Metals and thermo hardeners. 2.5% agent 3320289:curing of 30’ at 160°C: DISHWASHER PROOF.

Storage AND Toxicology The EPOXY EV inks comply with EN 71-3 standard.

Inks and mat base : 100 Catalyst : 10 Overprint varnish : 100 Catalyst : 15

STANDARD colours

OP Ref.

Packaging

lemon OP* 3322002

Ref.

Packaging

violet OP* 1 kg

3322035

Ref.

Packaging

brown OP* 1 kg

3322060

gold yellow OP*

medium blue OP*

black OP*

3322015

3322040

3322065

1 kg

orange OP* 3322020

1 kg

deep blue OP* 1 kg

3322045

1 kg

cherry red OP*

royal blue OP*

3322008

3322050

1 kg

carmine red OP* 3322033

1 kg

Packaging

covering white 1 kg

3322000

1 kg

white OP* 3322005

1 kg

medium green OP* 3322032 1 kg

cyclamen OP*

deep green OP*

3322030

3322034

1 kg

Ref.

1 kg Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

SCREEN PRINTING

4-COLOURS PROCESS THIXO

BASES

Ref.

thixo 4-COLOURS yellow 3322080 1 kg thixo 4-COLOURS magenta 3322082 1 kg

Packaging

thinner base and overprint varnish 3322079 1 kg matting base 3322078

Ref. tension agent 3262050

Packaging 1 kg

1 kg

Ref.

Packaging

catalyst 2606 3320594

100 g

catalyst 2606 3322094

1 kg

200 g

thixo 4-COLOURS cyan 3322084

1 kg

catalyst XG 800 3321097

thixo 4-COLOURS black 3322086

1 kg

catalyst XG 800 3322097

1 kg

thixo 4-COLOURS base 3322088

1 kg

catalyst 6969 3320796

100 g

catalyst 6969 3322096

1 kg

ADDITIVE Ref. adherence agent 3320289

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

Packaging 25 g

IMP. TIFLEX 28.01.2013. Non contractual colours and pictures.

Packaging

CATALYST

ADDITIVE

solvent inks Fluo plastique

Air drying ink intended for printing on flexible (tarpaulins) or rigid PVC, PMMA, polystyrene, polycarbonate and ABS.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Fluo plastique

FLUO Ref.

Air drying ink intended for printing on flexible (tarpaulins) or rigid PVC, PMMA, polystyrene, polycarbonate and ABS.

Packaging

fluo lemon 3352060

fluo orange

¾¾Average density: ¾¾Viscosity: ¾¾Covering power by opacity: ¾¾Coverage rate: ¾¾Weather resistance: ¾¾Light fastness: ¾¾Solvent: • thinner • retarder • brush ¾¾Cleaning solvents: • manual • washer ¾¾Expiry:

USE 1,05 7 ± 1 Pa.s few 35 m²/l with a 100 - 40 mesh few few

The PLASTIC FLUO inks are especially suitable for printing on rigid or flexible PVC (plates, tubes, sheets, PVC coated nylon and polyester cloth). In addition, they offer excellent adherence on polycarbonate, polymethyl methacrylate, ABS and polystyrene. They must be printed on white or on very light backgrounds. On flexible PVC, check that the «antiblocking» qualities of this ink are sufficient.

3352066

fluo red 3352069

4909 4900 4909 2881, 2891, 2899, NS-81, NS-91, NS-99 and NS-100 2881, NS-81, NS-91, NS-99, and NS-100 refer to the label

Storage AND Toxicology The PLASTIC FLUO inks comply with EN 71-3 standard.

fluo pink 3352072

fluo green 3352075

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP. TIFLEX 23.01.2013- Non contractual pictures

SPECIFICATIONS

solvent inks Matiflex

Thin-film, fast-drying, matt ink, dedicated to print poster papers and cardboards. This ink has excellent behaviour in the screen.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

STANDARD colours

Matiflex

3854002

¾¾Appearance: ¾¾Average density: ¾¾Viscosity: ¾¾Drying: ¾¾• ambient air • pulsed air tunnel ¾¾Coverage rate: ¾¾Weather resistance: ¾¾Light fastness: ¾¾Solvents: • thinner • retarder • semi-retarder gelified ¾¾Cleaning solvents: • manual • washer ¾¾Expiry:

Storage AND Toxicology The MATIFLEX inks comply with EN 71-3 standard.

matt 1,04 3.5 ± 1.5 Pa.s at 20°C 10 min. at 20°C 30 s at 50°C 65 m²/kg with a 120 - 34 mesh good medium, 7 to 4 depending on the colours

Ref.

5 kg

3854016

gold yellow

blue

3854004

3854022

5 kg

orange 3854006

Packaging

violet

lemon

Thin-film, fast-drying, matt ink, dedicated to print poster papers and cardboards. This ink has excellent behaviour in the screen.

SPECIFICATIONS

Packaging

5 kg

3854028

5 kg

3854007

Pantone® correspondance

5 kg

yellow

red

485 2x

royal blue

reflex blue

gold yellow

116

cyclamen

rhodamine red

green

354

orange

021

violet

dark green

green 2x

scarlet

warm red

blue

process blue

3854008

5 kg

cyclamen

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

4-COLOURS yellow 3854051 5 kg

5 kg

4-COLOURS cyan 3854054

5 kg

4-COLOURS black 3854056

5 kg

4-COLOURS base 3854057

5 kg

3854034

5 kg

FLUO Ref.

3854014

Packaging

dark green

red

lemon

3854032

5 kg

4-COLOURS magenta 3854053 5 kg

green

scarlet

Packaging

4-COLOURS PROCESS THIXO

4909 4900 4907 2881, 2891, NS-81, NS-91, NS-99 and NS-100 2899, NS-81, NS-91, NS-99, and NS-100 refer to the label

white 3854000

Ref.

royal blue 5 kg

Ref.

black 5 kg

3854044

5 kg

Packaging

fluo yellow 3854071

5 kg

fluo red 3854072

5 kg

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

IMP. TIFLEX 28.01.2013

Ref.

solvent inks Multiflex

Glossy air drying ink intended for printing on flexible (tarpaulins), rigid and adhesive PVC, polymethyl methacrylate and polycarbonate.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

STANDARD colours OP

Multiflex Glossy air drying ink intended for printing on flexible (tarpaulins), rigid and adhesive PVC, polymethyl methacrylate and polycarbonate. Gives glossy printing with excellent blocking resistance.

SPECIFICATIONS

Packaging

Ref.

Packaging

lemon yellow OP*

violet OP*

3534002

3534016

5 kg

Ref.

Packaging

brown OP* 5 kg

3534042

5 kg

USE glossy 1.10 8 ± 2 Pa.s 15 min. at 20°C 30 s at 50°C good 50 to 60 m²/l with a 120 34 mesh white gas good good 4905 9640 9640

The MULTIFLEX inks, are particularly suitable for printing on rigid and flexible PVC (self-adhesive, plates, tubes, sheets, PVC coated cloth). They also display excellent adherence on polycarbonate and polymethyl methacrylate. Not suitable on polystyrene and ABS. On flexible unvarnished PVC, check that the antiblocking qualities of these inks are sufficient. 10% to 20% matting base must be added, depending on the required finish. Multiflex white OP is not as flexible as the other colours in the range when very thick (more than 100 µm wet), check that the properties obtained are suitable. Can be used on all printing materials (manual, semi-automatic, automatic, roller to roller).

gold yellow OP*

medium blue OP*

black OP*

3534004

3534022

3534044

5 kg

orange OP* 3534006

5 kg

royal blue OP* 5 kg

3534024

5 kg

white OP* 3534000

5 kg

4903 2881, 2891, NS-81, NS-91, and NS-100 2881, 2899, NS-81, NS-99, and NS-100 refer to the label thermoformable

cherry red OP*

deep blue OP*

3534008

3534026

5 kg

Storage AND Toxicology The MULTIFLEX inks comply with EN 71-3 standard. carmine red OP*

medium green OP*

3534013

3534032

5 kg

thinner base and overprint varnish anti-UV 3534058

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

5 kg

cyclamen OP*

deep green OP*

matting base

3534014

3534034

3534065

5 kg

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

5 kg

IMP. TIFLEX 23.01.2013

¾¾Appearance: ¾¾Average density: ¾¾Viscosity: ¾¾Drying: • ambient air • air jet dryer ¾¾Covering power by opacity: ¾¾Coverage rate: ¾¾Special resistance: ¾¾Weather resistance: ¾¾Light fastness: ¾¾Solvents: • thinner • retarder • adhérence sur PVC souple • gun XC876 • brush ¾¾Cleaning solvents: • manual • washer ¾¾Expiry: ¾¾Special property:

Ref.

solvent inks Pates metalliques TIFLEX already proposes, in the mat VINYLIQUES and SELECTACRYL series ready-to-use, highly stable, metallic inks.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Pates metalliques TIFLEX already proposes, in the mat VINYLIQUES and SELECTACRYL series ready-to-use, highly stable, metallic inks. For the other series, we prefer to deliver, for stability reasons, metallic pastes and colourless bases in separate packages. The 2 components are mixed to obtain the same shades, and the quantities to be used can be prepared as required.

SPECIFICATIONS The base should be added to the paste while stirring. Recommended proportions: gold paste (1 or 3 or Copper) colourless paste (20 to 30 %) + (80 to 70 %) silver paste

SPECIAL EFFECT Ref.

Packaging

gold nº1** 3552015

gold nº3** 3552030

colourless paste (20 to 25 %) + (80 to 75 %)

*The leafing silver paste gives a white glossy finish but it cannot be overprinted the non-leafing silver paste can be overprinted and does not powder on the surface. **The GOLD pastes have no stability with the URETHAL + standard catalyst.

leafing silver* 3552075

GOLD URETHAL will be obtained by a coloring of the silver paste (contact us for more info).

sparkle silver 1l

non-leafing silver* 3552085

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

Non contractual pictures - IMP. TIFLEX 28.01.2013

3552080

solvent inks Plaxolor

Glossy air drying ink dedicated to print on acrylic resin coated polystyrene, its copolymers and rigid and acrylic resin coated PVC. It is formulated for high speed printing with drying in air jet drying. It is thermoformable.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Plaxolor

¾¾Appearance: ¾¾Smell: ¾¾Average density: ¾¾Viscosity: ¾¾Drying: • ambient air • pulsed air tunnel ¾¾Covering power: ¾¾Coverage rate: ¾¾Special resistance: ¾¾Weather resistance: ¾¾Light fastness: ¾¾Solvents: • thinner • drying activator • retarder • gun ¾¾Cleaning solvents: • manual • washer ¾¾Expiry date: ¾¾Special property:

Ref.

Packaging

lemon OP* 3392002

Ref.

Packaging

Ref.

violet OP* 1l

3392035

Packaging

brown OP* 1l

3392058

USE glossy few 1,05 7 ± 1 Pa.s 20 min. at 20°C 1 min. at 60°C with a 120 -34 mesh good 48 m²/kg with a 120 - 34 mesh petrol good good, 6 to 8 depending on the blue scale

The PLAXOLOR ink is specific for printing on acrylic resin coated polystyrene and rigid and acrylic resin coated PVC. Can be used on polymethyl methacrylate and on polycarbonate, after preliminary tests. Do not use on flexible PVC (tarpaulin, leather goods, etc.) or on crystal polystyrene. 10 to 20% matting base must be added, depending on the required finish.

medium blue OP* 3392040 1l

orange OP*

deep blue OP*

3392007

4920 4905 4960 or retargel or 9640 XC 876 2881, 2891, NS-81, NS-91, NS-99, and NS-100 2881, NS-81, NS-91, NS-99 and NS-100 refer to the label thermoformable

gold yellow OP* 3392022 1l

3392042

black OP* 3392055

white OP* 3392012

BASES Ref. cherry red OP*

royal blue OP*

3392008

3392043

Packaging

thinner base and overprint varnish 3392060

matting base 3392065

Storage AND Toxicology The PLAXOLOR inks comply with EN 71-3 standard. carmine red OP* 3392033

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

medium green OP* 3392048 1l

cyclamen OP*

deep green OP*

3392034

3392051

1l Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

IMP. TIFLEX 28.01.2013

SPECIFICATIONS

STANDARD colours OP

solvent inks Polycolor

Glossy air drying ink intended for printing on self-adhesive PVC, rigid, polymethyl methacrylate, ABS and some treated Polyesters.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Polycolor Glossy air drying ink intended for printing on self-adhesive PVC, rigid, polymethyl methacrylate, ABS and some treated Polyesters.

SPECIFICATIONS

USE

¾¾Appearance:

high glossy

¾¾Smell:

few

¾¾Average density:

- 1.05 for the coloriflex system shades - 1.10 for the OP shades - 1.00 for the four colour shade

¾¾Viscosity:

10 ± 1 Pa.s

¾¾Drying: • ambient air

15 min. at 20°C

¾¾Covering power:

- medium for the coloriflex system shades - good for the OP shades

The POLYCOLOR ink is mainly intended for printing on self-adhesive substrates. The COLORIFLEX system inks offer maximum light fastness and are there fore ideal for outdoor use. Depending on the required finish, 10 to 20% matting base can be used.

¾¾Coverage rate:

45 m²/kg with a 120 -34 mesh

¾¾Special resistance:

alcohol, petrol

¾¾Weather resistance:

- excellent for the coloriflex system and four-colour shades - good for the OP colours

¾¾Light fastness:

- excellent for the coloriflex system and four-colour shades - good for the OP colours

¾¾Solvents: • drying activator • thinner • retarder

4905 4945 retargel or 9640

¾¾Cleaning solvents: • manual • washer

2881, 2891, NS-81 and NS-91 2881, 2899, NS-81 and NS-91

¾¾Expiry date:

refer to the label

Storage AND Toxicology

¾¾Special property:

thermoformable

The POLYCOLOR inks comply with EN 71-3 standard.

STANDARD colours coloriflex system Ref.

Packaging

lemon* 3992012

Ref.

1 kg

3992026

blue*

3992015

3992030

1 kg

orange* 1 kg

1 kg

cherry red* 3992022

1 kg

3992041

Ref.

Packaging

1 kg

3992054

1 kg

gold yellow OP

medium blue OP

3992045

3992060

1 kg

3992048

1 kg

3992062

3992051

3992064

3992010

1 kg

3992034

1 kg

3992069

deep blue OP

royal blue OP

3992035

Packaging

1 kg

cherry red OP

1 kg

Ref.

brown OP

violet OP

emerald green*

white* 1 kg

Packaging

orange OP

black*

cyclamen* 3992024

3992032

Ref.

lemon OP

royal blue*

scarlet* 3992007

Packaging

violet*

gold yellow*

3992018

1 kg

carmine red OP

medium green OP

3992053

3992056

1 kg

cyclamen OP

deep green OP

3992052

3992067

1 kg

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

4-COLOURS PROCESS THIXO

BASES

Ref.

Packaging

thixo 4-COLOURS yellow 3992082 1 kg thixo 4-COLOURS magenta 3992084 1 kg thixo 4-COLOURS cyan 3992080

1 kg

thixo 4-COLOURS black 3992086

1 kg

thixo 4-COLOURS base 3992088

1 kg

Packaging

thinner base ans anti-UV overprint varnish 3992005

1 kg

matting base 3992008

1 kg

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP. TIFLEX 28.01.2013 - Non contractual colours and pictures

SCREEN PRINTING

solvent inks Polycolor extra-opaque

Matt air drying ink intended for printing on polycarbonate and on polyester. This ink does not adhere to PVC and is not thermoformable.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Polycolor extra-opaque Matt air drying ink intended for printing on polycarbonate and on polyester. This ink does not adhere to PVC and is not thermoformable. Caution : POLYCOLOR EXTRA OPAQUE ink cannot be mixed with the POLYCOLOR standard serie. SPECIFICATIONS

Ref.

Packaging

extra opaque white 3992040

1 kg

3994040

5 kg

The EXTRA-OPAQUE inks are reserved as the last opacifying layer for the front sides of treated polycarbonate and polyester.

matt 1.35 10 ± 2 Pa.s

extra opaque black

15 min. at 20°C excellent 20 to 25 m²/kg with a 61 -64 mesh

3992065

1 kg

3994065

5 kg

4920 4960 2881, 2891, NS-81 and NS-91 2881, 2899, NS-81 and NS-91 refer to the label

Storage AND Toxicology The EXTRA-OPAQUE inks comply with EN 71-3 standard.

Attention : the «extra opaque white» and «extra opaque black» are mat

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP. TIFLEX 28.01.2013 - Non contractual colours and pictures

¾¾Appearance: ¾¾Average density: ¾¾Viscosity: ¾¾Drying: • air ¾¾Covering power by opacity: ¾¾Coverage rate: ¾¾Solvents: • thinner • retarder ¾¾Cleaning solvents: • manual • washer ¾¾Expiry:

USE

extra opaque colours

solvent inks Polytiflex

Air drying ink especially designed for printing on polyolefins (polyethylene and polypropylene) : crates, buckets, etc.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

STANDARD colours

Polytiflex

Air drying ink especially designed for printing on polyolefins (polyethylene and polypropylene) : crates, buckets, etc.

SPECIFICATIONS ¾¾Appearance: ¾¾Average density: ¾¾Viscosity: ¾¾Drying: • air (20°C) • dry 12 to 24 h ¾¾Covering power by opacity: ¾¾Coverage rate: ¾¾Solvents: • thinner • retarder ¾¾Cleaning solvents: • manual • washer ¾¾Expiry date:

Ref.

Packaging

Ref.

lemon OP 3432002

Packaging

deep green OP 1l

3432034

USE satin 1,18 12 ± 2 Pa.s

The POLYTIFLEX ink is ideal for manual or low speed printing. To obtain excellent adherence, we recommend you to flame the substrate before printing. This ink should not be used for printing on thin films.

gold yellow OP 3432004

black 6165 1l

3432081

dust dry: 1 h good 50 m²/l with a 120 -34 mesh 4909 4900, propygel 2881, 2899, NS-81 and NS-99 2881, 2899, NS-81 and NS-99 refer to the label

white 6100

orange OP

Storage AND Toxicology

3432006

3432009

The POLYTIFLEX inks comply with EN 71-3 standard. cherry red OP 3432008

BASE primary BLUE 6140 OP 3432063

Packaging

thinner base 4720 and overprint varnish 3432090

royal blue 6135 3432054 BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

1l Non contractual colours and pictures

IMP. TIFLEX 28.01.2013

Ref.

solvent inks Propylux

Glossy air drying ink intended for printing on polypropylene, frequently encountered as Akilux速 and Priplak速 brands. It can adhere to untreated polypropylene (use of bonding primer), but flaming or Corona treatment, when possible, further improves its performance.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Ref.

Propylux

lemon

Glossy air drying ink intended for printing on polypropylene, frequently encountered as Akilux® and Priplak® brands. It can adhere to untreated polypropylene (use of bonding primer), but flaming or Corona treatment, when possible, further improves its performance. SPECIFICATIONS ¾¾Appearance: ¾¾Smell: ¾¾Average density: ¾¾Viscosity: ¾¾Drying: • ambient air • air jet dryer ¾¾Covering power by opacity: ¾¾Coverage rate: ¾¾Weather resistance: ¾¾Alcohol resistance: ¾¾Light fastness: ¾¾Solvents: • thinner • retarder ¾¾Cleaning solvents: • manual • washer ¾¾Expiry date:

USE glossy few 1,10 8 ± 1 Pa.s 15 min. at 20°C 2 min. at 60°C good 50 m²/kg with a 120 - 34 mesh poor good quite good

STANDARD colours

Packaging

The PROPYLUX ink was designed for printing on fluted or sheet polypropylene. These inks should not be used for printing on thin films (sheaths). The adhesion primer 3302070 improves the adherence of PROPYLUX ink on untreated substrates. If resistance to grease and/or sweating is required, it is essential to overprint the ink after drying with propylux varnish 3302075. 10% to 20% matting base must be added, depending on the required finish.

3302010

3302035

royal blue 1l

orange 3302020

Packaging

medium blue

gold yellow 3302015

Ref.

3302040

medium green 1l

3302045

4909 propygel or 4900 2881, 2899, NS-81 and NS-99 2899 refer to the label

cherry red 3302025

black 1l

3302050

Storage AND Toxicology

white

cyclamen 3302047

violet 3302030

3302005

thinner Base 3302060

VERNISH 3302075

adhesion primer 3X1189 3302070 BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP. TIFLEX 28.01.2013 - Non contractual colours and pictures

The PROPYLUX inks comply with EN 71-3 standard.

solvent inks Selectacryl

Glossy air drying ink intended for printing on self-adhesive PVC, polymethyl methacrylate, ABS, polystyrene, paper and cardboard.

SCREEN PRINTING

* making an impression

Selectacryl

Glossy air drying ink intended for printing on self-adhesive PVC, polymethyl methacrylate, ABS, polystyrene, paper and cardboard.

SPECIFICATIONS ¾¾Appearance: ¾¾Average density: ¾¾Viscosity: ¾¾Drying: • ambient air • air jet dryer ¾¾Covering power: ¾¾Coverage rate: ¾¾Weather resistance: ¾¾Light fastness: ¾¾Solvents: • thinner • drying activator • retarder • adhesion • gun ¾¾Cleaning solvents: • manual • washer ¾¾Expiry:

STANDARD colours Ref.

Packaging

lemon* 3372015

SPECIAL EFFECT

Ref.

Packaging

violet* 1l

3372045

USE glossy 1,05 10 ± 1 Pa.s 15 min. at 20°C 2 min. at 50°C medium for the Coloriflex system good for white, black and metallized colours 50 m²/l with a 120 -34 mesh 38 m²/l with a 100 - 40 mesh excellent, good glossy retention excellent, 7 to 8 depending on the blue scale 4920 or 4941 4905 4960 or retargel or 9640 4903 XC 876

The SELECTACRYL ink, with its exceptionally bright shade and its semi-opaque appearance, is dedicated to printing on selfadhesive supports and illuminated signs. Generally, we recommend you to print on self-adhesive PVC, rigid PVC, polymethyl methacrylate, ABS and polystyrene. * 10% to 20 % matting base must be added, depending on the required finish. When printing on crystal polystyrene, it will be necessary to dilute with solvents 4941 and 4960 only. Not suitable on flexible PVC.

gold yellow*

blue*

3372020

3372050

sparkle silver 3372075

gold nº1 3372065

Ref.

3372025

royal blue* 1l

3372052

Storage AND Toxicology The SELECTACRYL inks comply with EN 71-3 standard.

Packaging

thinner base and overprint varnish anti U.V. 3372080 1l matting base 3372085

scarlet* 3372007

3372055

cherry red*

black*

3372030

3372060

3372040

emerald green*

white*

cyclamen*

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

Packaging

BASES

orange*

2881, 2891, NS-81, NS-91, NS-99 and NS-100 2881, NS-81, NS-91, NS-99, and NS-100 refer to the label

Ref.

3372010

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

IMP. TIFLEX 28.01.2013

SCREEN PRINTING

solvent inks Siccative

It is a glycerophtalic ink drying by oxidation. This ink is used to print on metal, glass and minerals.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

STANDARD colours

Siccative

Ref.

It is a glycerophtalic ink drying by oxidation. This ink is used to print on metal, glass and minerals.

Packaging

lemon OP 3412002

¾¾Appearance: ¾¾Average density: ¾¾Viscosity: ¾¾Drying: • air (20°C) dust dry • oven dust free ¾¾Covering power: ¾¾Coverage rate: ¾¾Weather resistance: ¾¾Solvents: • thinner • retarder ¾¾Cleaning solvents: • manual • washer ¾¾Expiry:

Packaging

mid green OP 1l

3412032

USE glossy 1,28 10 ± 2 Pa.s

SICCATIVE ink is used when good outdoor performance is required: on metals, etc.) and on minerals (slate, brick, ceramic, glass). For non-ferrous metals please contact us.

2 to 3 h, dry 24h 1 h at 100°C excellent 44 m²/l with a 100 - 40 mesh good 4909 4900 2881, 2891, 289, NS-81, NS-91, NS-99 and NS-100 2899, NS-81, NS-91, NS-99 and NS-100 refer to the label

gold yellow OP

deep green OP

3412004

3412034

black 3380

orange OP 3412005

cherry red OP 3412008

3412042

white 3405 3412048

primary blue 3302

thinner base 4750

3412006

3412090

royal blue 3303 3412012 BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

1l Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

IMP. TIFLEX 28.01.2013

SPECIFICATIONS

Ref.

solvent inks Tampocolor

Shiny pad printing ink (ambient drying) dedicated to printings on rigid PVC, polymethyl Methacrylate, polycarbonate, polystyrene, aluminium.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Tampocolor Shiny pad printing ink (ambient drying) dedicated to printings on rigid PVC, polymethyl Methacrylate, polycarbonate, polystyrene, aluminium. By using an hardener, both treated polypropylene and treated polyethylene can be printed.

SPECIFICATIONS

USE

¾¾Aspect :

Shiny

¾¾Average density:

1,1

¾¾Viscosity:

4 ± 1 Pa.s

¾¾Drying: • ambient air • complete polymerization

1 mn 72 hours

¾¾Ink pot life and hardener:

8 hours

¾¾Weather Resistance:

average

¾¾Light resistance:

average

¾¾Specific resistance:

alcohol, petrol (with hardener)

¾¾Solvents: • thinner • accelerator

4920 4905

¾¾Cleaning solvents: • manual • Washer

2881, 2891, NS-81, NS-91 and NS-99 2881, NS-81, NS-91 and NS-99

¾¾Expiry date:

refer to the label

For difficult adherence on substrate or when a specific chemical adherence is required (alcohol resistance, petrol resistance, weather resistance) our TAMPOCOLOR ink will be combined with an hardener (representing 5% of the ink weigh). Pot life of the ink will be 8 hours at 20°C. In case of the increase of the ambient temperature, using time will be automatically reduced. Optimal performances will be obtained at least 72 hours after drying. Dilution to 15%. TAMPOCOLOR inks can be mixed together.

Storage AND Toxicology The TAMPOCOLOR inks comply with EN 71-3 standard.

OP colours Ref.

Packaging

lemon OP* 33A2002

Ref.

extra opaque Packaging

33A2016

Packaging

white*

violet OP* 1 kg

Ref.

1 kg

3992010

Ref.

Packaging

opaque red 1 kg

33A2088

gold yellow OP*

medium blue OP*

opaque lemon

33A2004

33A2022

33A2082

1 kg

orange OP* 33A2006

1 kg

cherry red OP* 33A2008

1 kg

deep blue OP*

opaque green

33A2026

33A2085

1 kg

deep green OP*

opaque white

33A2013

33A2034

33A2080

cyclamen OP*

black OP*

33A2014

33A2044

1 kg

medium green OP* 33A2032 1 kg

carmine red OP* 1 kg

1 kg

4-COLOURS PROCESS THIXO

BASE

Ref.

Packaging

4-COLOURS yellow 33A2050

1 kg

4-COLOURS magenta 33A2052

1 kg

4-COLOURS cyan 33A2054

1 kg

4-COLOURS black 33A2056

1 kg

thinner base OP* 33A2066

ADDITIVE

Packaging 1 kg

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

Ref. catalyst 33A0560

Packaging 100 gr

IMP. TIFLEX 04.07.2013 - Non contractuals pictures

SCREEN PRINTING

solvent inks Urethal

2-component polyurethane ink combining the properties of adherence on many substrates and remarkable resistance to light and UV.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Urethal 2-component polyurethane ink combining the properties of adherence on many substrates and remarkable resistance to light and UV.

SPECIFICATIONS

USE

¾¾Appearance:

glossy

¾¾Average density:

1,10

¾¾Viscosity:

8 ± 2 Pa.s

¾¾Drying: • ambient air can be handled • IR tunnel

after 75 min. can be stacked after 12 hours complete polymerisation after 72 hours preliminary tests

¾¾Coverage rate:

43 m²/kg with a 100 - 40 mesh

¾¾Special resistance:

excellent to chemical products

¾¾Weather resistance:

excellent

¾¾Light fastness:

excellent

¾¾Solvents: • thinner and brush • retarder • gun

4904 or 4905 4960 or 9640 XC 876

¾¾Cleaning solvents: • manual • washer

2881, 2891, NS-81, NS-91, NS-99 and NS-100 2881, NS-81, NS-91, NS-99, and NS-100

¾¾Expiry:

refer to the label

¾¾Special property:

thermoformable

The URETHAL inks are mixed with URETHAL hardener in a ratio of 100 to 15 by weight, apart from WHITE which has a ratio of 100 to 10. The pot life of the mixture is more than 8 hours at 20°C. Higher temperatures reduce the pot life and the time of use. The final performance is obtained after at least 72 h drying. The URETHAL inks are miscible together. The screen must be cleaned immediately after printing. For brush application, dilute at 25% with thinner 4904. The thinner base is anti-UV.

Storage AND Toxicology The URETHAL inks comply with EN 71-3 standard.

COLORIFLEX SYSTEM Ref.

Packaging

lemon* 3572021

Ref.

Packaging

violet* 1 kg

3572053

gold yellow*

blue*

3572023

3572061

1 kg

orange* 3572031

1 kg

3572071

1 kg

black* 1 kg

3572081

1 kg

white*

cyclamen* 3572051

3572063

emerald green*

cherry red* 3572043

1 kg

royal blue*

scarlet* 3572007

1 kg

3572011

1 kg

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

4-COLOURS PROCESS THIXO

BASES

Ref.

Packaging

thixo 4-COLOURS yellow 3572050 1 kg thixo 4-COLOURS magenta 3572052 1 kg thixo 4-COLOURS cyan 3572054

1 kg

thixo 4-COLOURS black 3572056

1 kg

thixo 4-COLOURS base 3572057

1 kg

overprint varnish and thinner base 3572091 matting base 3572090

ADDITIVES Packaging

1 kg

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

Ref.

Packaging

adherence agent 3320289

25 g

urethal catalyst 3570803

150 g

urethal catalyst 3572003

1 kg

Non contractual pictures - IMP. TIFLEX 04.07.2013

SCREEN PRINTING

solvent inks Vernis anti salissure

2-component cleanable protective varnish resistant to water-based and alcohol-based felt tip pens and VelledaÂŽ felt tip pens (CONTĂ&#x2030;). It is applied only as overprinting on MAT VINYL inks or on non acrylic resin coated PVC.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Vernis anti salissure 2-component cleanable protective varnish resistant to water-based and alcohol-based felt tip pens and Velleda® felt tip pens (CONTÉ). It is applied only as overprinting on MAT VINYL inks or on non acrylic resin coated PVC.

SPECIFICATIONS high glossy 1.05 24 h at 20°C minimum 72 h at 20°C minimum > 8 h at 20°C 40 m²/l with a 90-48 mesh 4905 XC 876

STANDARD colours Ref.

Packaging

anti-fouling varnish (750 g varnish + 250 g catalyst) 3352098

2881, 2891, NS-81, NS-91, NS-99, and NS-100 2881, 2899, NS-81, NS-91, NS-99, and NS-100 refer to the label

Storage AND Toxicology The anti-fouling varnish for erasable writing comply with EN 71-3 standard.

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP. TIFLEX 28.01.2013 - Non contractual pictures.

¾¾Appearance: ¾¾Average density: ¾¾Drying: • dry stackable • polymeriaation ¾¾Pot life: ¾¾Coverage rate: ¾¾Solvents: • thinner • gun ¾¾Cleaning solvents: • manual • washer ¾¾Expiry date:

USE 15 min to 30 min. before printing, mix the varnish and the catalyst in the following proportions by weight: • varnish: 75 measures • 25 measures At this stage, the mixture can be used for 8 hours at 20°C. The anti-fouling varnish is applied only on MAT VINYL inks used in the manufacture of labels, of panels, time tables on PVC. For optimum results, we recommend you to use of a 90 - 48 mesh. Final resistance is obtained after 8 days at 20°C. I n case of a significant dilution, increase the deposit.

solvent inks Chromo transfer varnish Enamel based inks are printed on specific transfer paper. Chromo varnish is applied on the whole surface of decalcomania. After cooking, enamels are welding, the varnish sublimates and disapeared.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Chromo transfer varnish

Enamel based inks are printed on specific transfer paper. Chromo varnish is applied on the whole surface of decalcomania. After cooking, enamels are welding, the varnish sublimates and disapeared.

ADDITIVES Ref.

Packaging

yellow chromo tranfer varnish 3800 3836020

25 l

incolore chromo transfer varnish 3915

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

25 l

IMP. TIFLEX 28.01.2013 - Non contractual pictures.

3836030

1450

Bradley Drive

1450 1450

solvent inks Vinyflex

Glossy air drying ink intended for printing on polycarbonate, ABS, hard PVC, polymethyl methacrylate and painted metal.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

STANDARD colours

Vinyflex Glossy air drying ink intended for printing on polycarbonate, ABS, hard PVC, polymethyl methacrylate and painted metal.

SPECIFICATIONS ¾¾Appearance: ¾¾Average density: ¾¾Viscosity: ¾¾Drying: • ambient air • air jet dryer ¾¾Covering power: ¾¾Coverage rate: ¾¾Special resistance: ¾¾Weather resistance: ¾¾Light fastness: ¾¾Solvents: • thinner • drying activator • retarder • adhesion • gun • brush ¾¾Cleaning solvents: • manual • washer ¾¾Expiry: ¾¾Special property:

USE glossy 1,12 7 ± 1 Pa.s 12 min. at 20°C 45 s at 50°C good 45 m²/kg with a 120 - 34 mesh alcohol, petrol good good

VINYFLEX ink is particularly recommended for printing on polycarbonate and whenever perfect resistance to alcohol and petrol on vinyl self-adhesives is required. This ink is suitable for thermoforming. 10 to 30 % matting base must be added, depending on the required finish. Not suitable on flexible PVC. Adhesive 0380 is used to stick polycarbonate labels print with VINYFLEX ink.

Packaging

3482002

Packaging

3482052

Ref.

Packaging

deep green OP 1l

3482056

orange OP

primary blue

black

3482024

3482036

3484036

3482009

3484009

light blue

3482034

gold yellow OP 3482005 1l

cherry red OP

Storage AND Toxicology

Ref. violet

lemon OP

3482006

4920 4905 4960 or retargel 9640 XC 876 4903 2881, 2891, NS-81, NS-91, and NS-100 2881, NS-81, NS-91 and NS-100 refer to the label thermoformable

Ref.

brown 1l

3482080

deep blue

white

3482028

3482004 3484004

1l 5l

The VINYFLEX inks comply with EN 71-3 standard. carmine red OP

royal blue

3482013

3482060

thinner base and overprint varnish anti-UV 3482040 3484040

1l 5l

matting base cyclamen 3482048

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

medium green OP 3482033 1l Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

IMP. TIFLEX 28.01.2013

3482042

solvent inks Vinylique brillante

Glossy air drying ink particularly intended for printing on selfadhesive substrates.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

STANDARD colours

Vinylique brillante

Glossy air drying ink particularly intended for printing on self-adhesive substrates.

¾¾Appearance: ¾¾Average density: ¾¾Viscosity: ¾¾Drying: • ambient air • air jet dryer ¾¾Covering power: ¾¾Coverage rate: ¾¾Weather resistance: ¾¾Solvents: • thinner • drying activator • retarder • gun ¾¾Cleaning solvents: • manual • washer ¾¾Expiry date:

Packaging

lemon yellow OP 3342002 1l

Ref.

Packaging

violet 8570 3342032

Ref.

Packaging

deep green OP 1l

3342034

15 min. at 20°C 1 min. at 50°C good 50 m²/l with a 120 -34 mesh good 4920 4905 4960 or retargel or 9640 XC 876

The GLOSSY VINYL inks are printed on all varnished vinyl or polyester self-adhesive supports and also on polycarbonate sheets (macrolon®, lexan®). 10% to 30 % matting base must be added, depending on the required finish. Not suitable on flexible PVC.

Packaging

thixo 4-COLOURS yellow 8670 3342081 1l thixo 4-COLOURS magenta 8680 3342082 1l

USE high glossy 1,12 7 ± 1 Pa.s

Ref.

gold yellow OP 3342005 1l

light blue 8580

brown OP

3342036

3342042

thixo 4-COLOURS cyan 8690 3342083 1l thixo 4-COLOURS black 8700 3342085 1l

Storage AND Toxicology The GLOSSY VINYL inks comply with EN 71-3 standard.

2881, 2891, NS-81, NS-91, NS-99 and NS-100 2881, NS-81, NS-91, NS-99, and NS-100 refer to the label

orange OP 3342007

primary blue 8590 3342040 1l

black 8660 3342068

BASES thixo 4-COLOURS base 8710 3342096 1l cherry red OP 3342009

deep bleu 8600 3342044

white 8500 3342004

thinner base 4860 3342072

matting base 3342074 carmine red OP

royal blue 8605

3342013

3342046

covering white 8505 3342006 1l

3342028

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

overprint varnish anti-UV 3342076

cyclamen 8560

medium green OP 3342033 1l Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

IMP. TIFLEX 28.01.2013

SPECIFICATIONS

Ref.

4-COLOURS PROCESS THIXO

solvent inks Vinylique mate

Air drying ink intended for printing on flexible (tarpaulins) or rigid PVC. Gives satin to matt finish printing with good resistance to blocking, alcohol and gasoline.

SCREEN PRINTING

* making an impression

SCREEN PRINTING

Vinylique mate Air drying ink intended for printing on flexible (tarpaulins) or rigid PVC. Gives satin to matt finish printing with good resistance to blocking, alcohol and gasoline.

¾¾Appearance: ¾¾Average density: ¾¾Viscosity: ¾¾Drying: • air ¾¾Covering power: ¾¾Coverage rate: ¾¾Weather resistance: ¾¾Solvents: • thinner • retarder • adhesion • gun • brush ¾¾Cleaning solvents: • manual • washer ¾¾Expiry date: ¾¾Special property:

Ref.

Packaging

lemon OP 3352002

Ref.

Packaging

Ref.

black 4600

violet 1l

3352026

Packaging

3352036

USE satin to mat 1.24 12 ± 2 Pa.s 10 min. at 20°C very good 43 m²/l with a 100 - 40 mesh good

The MAT VINYL inks are particularly suitable for printing on rigid or flexible PVC (plates, tubes, sheets, PVC coated nylon and polyester cloth). In addition they display excellent adherence on polycarbonate and polymethyl methacrylate.

4920 4960 4903 or 9640 XC 876 (minimum 70%) 4905 2881, 2891, NS-81, NS-91, and NS-100 2881, NS-81, NS-91, and NS-100 refer to the label thermoformable

gold yellow OP 3352004

orange OP 3352007

primary blue 4400 3352003 1l

royal blue 4401 1l

3352006

white 4580 3352033

SPECIAL EFFECT Ref.

Packaging

silver 3352040

gold nº1 4622 3352042

Storage AND Toxicology The MAT VINYL inks comply with EN 71-3 standard.

cherry red OP 3352008

primary red 4500 3352021 1l

medium green OP 3352032 1l

deep green OP 3352034

BASES Ref.

glossy thinner base and overprint varnish anti-UV 3352057

cyclamen 3352025

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

brown 4560 1l

3352030

Non contractual colours and pictures On simple request, we can propose you a color panel card displaying accurate shades.

Packaging

mat thinner base and overprint varnish anti-UV 3352070

IMP. TIFLEX 28.01.2013

SPECIFICATIONS

STANDARD colours

ETCHING RESIST BLACK XE880 SCREEN PRINTING

* making an impression

SCREEN PRINTING

ETCHING RESIST BLACK XE880 Black bituminous ink formulated to print on printed circuits and aluminium. It resist to chemical etching baths and is removable with solvents. To obtain etching resistance, we recommend to print a homogeneous ink film (mesh 90 threads/cm) . Ink will be removed with solvent 4909. It dries at room temperature but a drying at 80°C increases the hardness of the surface and allows mechanical operations before etching (brushing).

Specification XE880 Grinding fineness Viscosity

XE880 black

REF. 1 kg 3512020

Solvents : - thinner - stripping Cleaning solvents : - manual - machine Expiry

4909, 5 % max naphta / chloride solvents 2899 - 2891 2899 refer to the label

IMP. TIFLEX 28.01.2013

DESCRIPTION

8 13 ± 2 Pa.s

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

solvent inks XF 260

Mixed air drying ink offering good adherence on various substrates: â&#x20AC;˘ metal, particularly aluminium and its alloys (curing essential) â&#x20AC;˘ PVC (drying in ambient air).

SCREEN PRINTING

* making an impression

SCREEN PRINTING

XF 260

Ref.

SPECIFICATIONS

3592010

USE satin 1.10 6 ± 3 Pa.s 20 min at 20°C 15 min. at 130°C good 48 m²/kg with a 120 - 34 mesh alcohol, petrol good good

Packaging

lemon OP

Mixed air drying ink offering good adherence on various substrates: • metal, particularly aluminium and its alloys (curing essential) • PVC (drying in ambient air).

The XF 260 ink is mainly used for printing on anodized and sealed aluminium, and for printing on aluminium plates which will be stamped. For these 2 applications, curing 15 min at 130°C is essential.

Ref.

Packaging

covering white 3594006

cherry red OP 3592008

BASE & ADDITIVE Ref. medium blue OP 3592040

Packaging

thinner base and overprint varnish 3594090

4920 4905 4960 or retargel or 9640 XC 876 2881, 2891, NS-81, NS-91 and NS-100 2881, NS-81, NS-91 and NS-100 refer to the label

Storage AND Toxicology The XF 260 inks comply with EN 71-3 standard.

medium green OP 3592055

black OP 3594065

white OP 3594005

BP 3 - 01450 PONCIN - France International Sales : Tel. +33 (0) 4 74 37 33 80/97 - Fax +33 (0) 4 74 37 33 62 - international@tiflex.fr - www.tiflex.com

IMP. TIFLEX 28.01.2013 - Non contractual colours and pictures

¾¾Appearance: ¾¾Average density: ¾¾Viscosity: • ambient air • oven curing ¾¾Covering power: ¾¾Coverage rate: ¾¾Special resistance: ¾¾Weather resistance: ¾¾Light fastness: ¾¾Solvents: • thinner • drying activator • retarder • gun ¾¾Cleaning solvents: • manual • washer ¾¾Expiry date:

STANDARD colours