S N O I T O M S N PRO O I AT V O INN 2015
Enter ou Annivers r a Lucky Dr r y aw
Partner for specialist retailers
Into the Future with our Innovations In Germany at home – in demand worldwide
valid until 29.02.2016
CAL
IPERS
Universal pocket caliper „Pocket Talent“ The all-round talent that can be used for internal and external measurements. It can be combined with all common types of measuring inserts for indicators with a standard M 2.5 thread. Therefore, the small universal caliper from HELIOS • PREISSER offers you virtually unlimited measurement applications.
4299.-
NEW
output with data
LCD display: 7.5 mm Additional Extras Variable data output RS 232 + Digimatic + USB PRESET Function (setting a numerical value)
• accurate setting standard 0710177*
Specification • Stainless steel • Factory standard • Locking screw
• For internal and external measurements • Individually adaptable on problematic tasks through measuring inserts with thread M 2.5
0710161*
Electronic functions
Shipment
• • • • •
• Shipment in wooden case, incl. setting standard and * 2 pairs of measuring inserts Balls Ø 5.0 mm Planar surface Ø 4.8 mm
ON/OFF switch QuickLock Function QuickStart Electronic Zero setting at any position mm/inch conversion
Scan to watch
IP 67
Measuring range mm inch 150
6
Jaw length mm inch 40
1.57
lusive c x e r u o r e t En
t P ocke t Talen lucky draw!
2
= QuickLock
= QuickStart
IP xx
= Waterproof acc. IP
=Data output
DIN
= DIN
Reading mm inch
Ref. No.
0.01
1326 932
.0005
DIGI-MET® Pocket calipers Electronic functions
Specification • Protection class IP67 • Four way measurement • Stainless steel
• • • • •
• Locking screw • Inside cross points
479.-
ON/OFF switch QuickLock Function QuickStart Electronic Zero setting at any position mm/inch conversion
NEW
DIN 862
Display with bigger
IAL
Supplied with
n atio libr a ca
LCD display: 11 mm
Measuring range mm inch
f rti ce
ic
C
TION ALIBRA
at e
ES INIT
INCLUD
150 150
6 6
Jaw length mm inch 40 40
Reading mm inch
1.57 1.57
0.01 0.01
.0005 .0005
Depth gauge
Ref. No.
Ø 1.5 mm rectangular
1320 416 1320 417
Shipment in plastic case
NEW Display
4119.-
with bigger
IP67
IAL
c ion rat calib Supplied with a
tif er
LCD display: 11 mm
Measuring range mm inch 150 6 150 6
ic
ION
at e
ES INIT
INCLUD
AT CALIBR
Additional Extra PRESET Function (setting a numerical value)
IP 67
Jaw length mm inch 40 1.57 40 1.57
Reading mm inch 0.01 .0005 0.01 .0005
Depth gauge
Ref. No.
Ø 1.5 mm
1326 416 1326 417
rectangular
Shipment in plastic case
NEW output
with data
IAL
Supplied with
nc atio libr a ca
tif er
LCD display: 7.5 mm
ic
ION
at e
ES INIT
INCLUD
AT CALIBR
Additional Extra Variable data output RS 232 + Digimatic + USB
IP 67
Measuring range mm inch 150 6 150 6
Jaw length mm inch 40 1.57 40 1.57
Reading mm inch 0.01 .0005 0.01 .0005
Depth gauge
Ref. No.
Price Euro
Ø 1.5 mm
1326 516 1326 517
152.00 152.00
rectangular
Shipment in plastic case
= QuickLock
= QuickStart
IP xx
= Waterproof acc. IP
= Data output
DIN
= DIN
3
CAL
IPERS
DIGI-MET® Depth gauges IP67
IP 67
4299.-
IAL
ES INIT
Supplied with a
N
at e
ATIO CALIBR
f rti ce
ic
INCLUD
ion rat calib
NEW Display
with bigger
Measuring pin dia.1.5 mm
DIN 862
Specification • Stainless steel • Inductive measuring system, protection class IP67 • Locking screw • Shipment in wooden case
LCD display: 11 mm Additional Extra PRESET Function (setting a numerical value)
Electronic functions • • • • •
IP 67
Measuring range mm inch 150 6
Base length mm inch 100 4
Reading mm inch 0.01 .0005
Ref. No. 1371 416
Extension depth attachment base
ON/OFF switch QuickStart Electronic QuickLock Function mm/inch conversion Zero setting at any position
for depth gauges 1371...
Depth attachment base
Ref. No.
length mm
200 300
1271 451 1271 452
Price Euro 82.00 95.00
NEW
* 1279 780
IP67 now with
Your benefits: LCD display: 7.5 mm Additional Extra Variable data output RS 232 + Digimatic + USB
• • • • •
only 1 main unit needed to deal with tricky measuring problems Interchangeable inserts for solving different measuring tasks slender rail Measuring base can be attached (optional, see accessories) data capturing and transmission
Measuring range mm inch 300 12 500 20
Base length mm inch 150 6 150 6
Reading mm inch 0.01 .0005 0.01 .0005
Ref. No. 1379 722 1379 728
Price Euro 612.00 844.00
Shipment in wooden case incl. insert for width and distance measurements
4
= QuickLock
= QuickStart
IP xx
= Waterproof acc. IP
=Data output
DIN
= DIN
DIGI-MET® Depth gauges IP67
IP 67
with slender rail Specification
Electronic functions
• • • • •
• • • • • •
Protection class IP67 Stainless steel LCD display: 7.5 mm Locking screw Shipment in wooden case
4325.-
ON/OFF switch QuickStart Electronic QuickLock Function Zero setting at any position mm/inch conversion Variable data output RS 232 + Digimatic + USB
IP 67
Measuring range mm inch 300 12
Base length mm inch 150 6
Reading mm inch 0.01 .0005
Ref. No. 1360 722 DIN 862
IAL
ion rat calib Supplied with a
f rti ce
ic
C
TION ALIBRA
at e
ES INIT
INCLUD
DIN 862
with replaceable pin
Replaceable pin, dia. 2 x 5 mm IAL
Supplied with a
N
ion rat calib
f rti ce
ic
ATIO CALIBR
at e
ES INIT
INCLUD
IP 67
Measuring range mm inch 300 12
Base length mm inch 150 6
Reading mm inch 0.01 .0005
Ref. No. 1364 728
Price Euro 418.00
with L shaped measuring rod
Additional Extra PRESET Function (setting a numerical value)
IP 67
Measuring range mm inch 300 12
Base length mm inch 150 6
Reading mm inch 0.01 .0005
Ref. No. 1362 722
Price Euro 397.00
with straight measuring rod
IP 67
Measuring range mm inch 300 12
Base length mm inch 150 6
Reading mm inch 0.01 .0005
Ref. No. 1368 722
Price Euro 397.00
Optional: Sliding measuring base, see catalogue p. 74
= QuickLock
= QuickStart
IP xx
= Waterproof acc. IP
= Data output
DIN
= DIN
5
INDI
CAT OR
S
DIGI-MET® Indicators for static measurements Specification
Electronic functions
• • • • •
• • • • •
Housing dia. 60 mm Replacement probe tip M 2.5 Clamping shank dia. 8 mm Factory standard Hardened stainless steel spindle
• mm/inch conversion • Individual buttons can be locked • Variable data output RS 232 + Digimatic + USB • PRESET Function (setting a numerical value)
ON/OFF switch QuickStart Electronic QuickLock Function Zero setting at any position Reversal of counting direction
Extras IP 52
• LCD display with 12 mm high numerals • Measuring force 0.5 - 1 N • Protection class IP52
Measuring range Reading mm inch mm inch 12.5 .5 0.01 .0005 12.5 .5 0.001 .00005
N
OTIO
PROM Error limit μm 20 5
Ref. No. 1722 502 1724 502
Promotion Price Euro 119.00 199.00
Shipment in Cardboard box 1724 502 IP 42
1722 502
Specification
Extras
• Aluminium housing • Protection class IP42 • Display unit can be rotated through 280° • LCD display with 11 mm high numerals
• Absolute function (display can be set to zero without losing the Preset value) • Tolerance function • Factor input
Measuring range Reading mm inch mm Reading 0.01 mm 12.5 .5 0.01 25.0 1.0 0.01 Reading 0.001 mm 12.5 .5 0.001* 25.0 1.0 0.001*
Error limit Total span μm Partial span** μm
Ref. No.
Price Euro
20 20
-
1728 502 1728 506
267.00 340.00
4 4
2 2
1726 502 1726 506
319.00 351.00
1726 502
1728 502
* Reading switchable: 0.0005 / 0.001 / 0.002 / 0.005 / 0.010 mm ** Partial span= 25 steps by step value 0.0005 mm
6
= QuickLock
= QuickStart
IP xx
= Waterproof acc. IP
= Data output
DIN
= DIN
DIGI-MET® Indicators Specification
Electronic functions
• • • • • •
• • • •
Aluminium housing Outer ring (Bezel) dia. 60 mm Replacement probe tip M 2.5 Protection class IP 54 Clamping shank dia. 8 mm Display unit can be rotated through 280° • LCD display with 11 mm high numerals • Factory standard • Shipment in cardboard box
Measuring range mm inch 12.5 .5 25.0 1.0
Reading mm 0.001* 0.001*
ON/OFF switch QuickStart Electronic QuickLock Function Zero setting at any position • mm/inch conversion • Absolute function (display can be set to zero without losing the PRESET value) • Tolerance function
Total span μm 4 4
IP 54
• Reversal of counting direction • Factor input • Individual buttons can be locked • Variable data output RS 232 + Digimatic + USB • PRESET Function (setting a numerical value)
Error limit Partial span** μm 2 2
Ref. No. 1730 502 1730 506
Price Euro 353.00 398.00
1730 502 1730 506
* Reading switchable: 0.0005 / 0.001 / 0.002 / 0.005 / 0.010 mm ** Partial span= 25 steps by step value 0.0005 mm
Dial comparator gauge MICROTAST
DIN 879
Specification • • • • •
• Measuring spindle is made of hardened stainless steel • Longer measuring spindle • Replacement probe tip M 2.5 • Clamping shank dia. 8 mm
Tolerance markers Shockproof Fine adjustment DIN 879 Shipment in Case
MO PRO 0712 121 0712 124
Measuring range mm 0.5 0.1
Reading mm 0.01 0.001
Dial reading
Overtravel mm 2.5 3.0
25-0-25 50-0-50
Ref. No.
TION
0712 121 0712 124
Promotion Price Euro 129.00 149.00
N
PR
Compact measuring stands Specification • Cast base • Chrome finished columns • Hardened steel table
TIO OMO
0770 103
• With dust grooves • With mounting hole for dial gauges dia. 8 mm • Shipment in cardboard box
Measuring height Reach Column Transverse arm Table surface Ref. No. Promotion Price mm mm dia. mm dia. mm mm Euro With fixed arm 100 49 22 — 60 x 68 0770 103 155.00 With adjustable transverse arm 100 100 22 18 60 x 68 0770 201 189.00
= QuickLock
= QuickStart
IP xx
= Waterproof acc. IP
0770 201
= Data output
DIN
= DIN
7
MIC
ROME
TERS
Precision dial micrometers
DIN 863-3
Specification • • • •
DIN 863-3 Reading: 0.01 mm Reading on the dial: 1 μm Reading parts are satin chrome finished
• Carbide measuring faces • Thermally insulated • Adjustable tolerance markers
• Retraction stroke 1.5 mm • Spindle made of hardened stainless steel • Constant measuring force • Locking lever
Measuring range Spindle dia. mm mm 0 - 25 7.5 25 - 50 7.5
Thimble dia. mm 17.5 17.5
Pitch mm 0.5 0.5
Ref. No. 0849 501 0849 502
Price Euro 680.00 809.00
Shipment in wooden case
Retraction stroke 1.2 mm
Measuring range Spindle dia. mm mm 0 - 25 7.5 25 - 50 7.5 50 - 100 7.5
Thimble dia. mm 17.5 17.5 17.5
Pitch mm 0.5 0.5 0.5
Ref. No. 0850 511 0850 512 0850 514
Price Euro 538.00 597.00 634.00
Shipment in wooden case, incl. dial comparator gauge
External micrometers
DIN 863-1
Specification
N
PR
TIO OMO
• DIN 863-1 • Reading: 0.01 mm • Reading parts are satin chrome-finished • Locking lever • Ratchet stop
Measuring range Spindle dia. mm mm 0 - 25 6.5 25 - 50 6.5 50 - 75 6.5 75 - 100 6.5
Thimble dia. mm 17.5 17.5 17.5 17.5
• • • •
Carbide measuring faces Thermally insulated Coated steel frame From measuring range 25 - 50 mm upwards includes a setting gauge • Shipment in plastic case
Pitch mm 0.5 0.5 0.5 0.5
Ref. No. 0806 521 0806 522 0806 523 0806 524
Promotion Price Euro 37.00 57.00 72.00 82.00
Holder for external micrometers Specification • With heavy cast-iron base • Vertically rotating and lockable • Shipment in cardboard box
8
For measuring range mm 0 - 300
Ref. No. 0807 101
445.-
Set of DIGI-MET® 2 point internal micrometers Specification • Switchable increment value 0.01/0.001/0.0005 mm • Repeatability1 µm • Protection class IP65 • LCD-display 6 mm • Hard chrome plated measuring head
Proxi
Electronic functions • For fast and accurate measurements of small holes • Compact design. Can be used like a ballpoint pen • Setting with setting ring • Shipment in wooden case
IP 65
ON/OFF switch mm/inch conversion Hold function Data output RS 232 Proximity • PRESET Function (setting a numerical value)
DIN 878
• • • •
NEW ange
in our r
Measuring range Measuring depth mm mm 0.95 - 1.55 0.60 - 11 1.50 - 2.45 0.90 - 17 2.25 - 4.25 1.20 - 22 3.65 - 6.35 2.00 - 40
= QuickLock
= QuickStart
IP xx
No. of probes 5 3 7 5
= Waterproof acc. IP
Setting ring dia. mm 1 / 1.1 / 1.2 / 1.3 / 1.4 1.75 / 2 / 2.25 2.5 / 2.75 / 3 / 3.25 / 3.5 / 3.75 / 4 4 / 4.5 / 5 / 5.5 / 6
= Data output
DIN
= DIN
Ref. No. 0727 752 0727 755 0727 758 0727 761
Price Euro 2,450.00 1,540.00 2,190.00 1,740.00
9
INTE
RN AL M
ICROMETERS
3 point internal micrometers
DIN 863-4
Specification • • • •
N
OTIO
PROM
DIN 863-4 Reading: 0.001 mm* Reading: 0.005 mm Reading parts are satin chrome finished
• Pitch 0.5 mm • Carbide tipped measuring pins from measuring range 12 mm • Ratchet stop
• From measuring range 12 mm for through and blind holes • Calibration certificate for ring and device • Shipment in plastic case • incl. setting ring
Individual devices
IAL
ES INIT
INCLUD
at e
ATION CALIBR and f o r ri n g
mic
ic
f rti ce ion r rat alib te c a e h Supplied wit om
r
Measuring range Measuring depth mm mm 6 8 58 8 - 10 58 10 - 12 58 12 - 16 64 16 - 20 64 20 - 25 68 25 - 30 68 30 - 40 76 40 - 50 76 50 - 60 79 60 - 70 79 70 - 85 97 85 - 100 97
Thimble mm 16 16 16 16 16 25 25 25 25 25 25 25 25
Accuracy µm 4 4 4 4 4 4 4 4 4 5 5 5 5
Setting ring dia. mm 8 10 12 16 20 25 30 40 50 60 70 85 100
Ref. No. 1921 510* 1921 512* 1921 514* 1921 516* 1921 518* 1921 520 1921 522 1921 524 1921 526 1921 528 1921 530 1921 532 1921 534
Promotion Price Euro 315.00 315.00 315.00 315.00 329.00 339.00 345.00 385.00 385.00 449.00 459.00 469.00 485.00
O PROM
TION
Sets
Inclusive!
10
Measuring range mm 6 - 12 12 - 20 20 - 50 50 - 100
Thimble mm 16 16 25 25
Setting ring dia. mm 8 + 10 16 25 + 40 60 + 85
Ref. No. 1920 574* 1920 576* 1920 578 1920 580
Promotion Price Euro 799.00 619.00 1,399.00 1,669.00
DIGI-MET® 3 point internal micrometers
DIN 863-4
Power IP 67
NEW tooth
with Blue
Inclusive!
Individual devices
IAL
Supplied with a
ion rat calib
and f o r ri n g
mi
f rti ce
ic
C
TION ALIBRA
at e
ES INIT
INCLUD
m cro
et
er
Measuring range Measuring depth mm mm 6 8 58 8 - 10 58 10 - 12.5 58 12.5 - 16 62 16 - 20 62 20 - 25 66 25 - 35 66 35 - 50 80 50 - 65 80 65 - 80 80 80 - 100 100
Accuracy µm 4 4 4 4 4 4 4 4 5 5 5
Price Euro 983.00 983.00 995.00 1,009.00 1,009.00 1,212.00 1,393.00 1,448.00 1,611.00 1,611.00 1,698.00
Ref. No. Bluetooth 0907 806 0907 807 0907 808 0907 809 0907 810 0907 811 0907 812 0907 813 0907 814 0907 815 0907 816
Price Euro 1,058.00 1,058.00 1,070.00 1,084.00 1,084.00 1,287.00 1,468.00 1,523.00 1,686.00 1,686.00 1,773.00
Electronic functions
Specification • DIN 863-4 • Reading: 0.001 mm / .00005 inch • Protection class IP67 • LCD display • Certificate for setting ring and internal micrometer • Ratchet stop • For through holes
Setting ring dia. Ref. No. mm without Bluetooth 8.0 0907 706 8.0 0907 707 12.5 0907 708 12.5 0907 709 20.0 0907 710 20.0 0907 711 35.0 0907 712 35.0 0907 713 65.0 0907 714 65.0 0907 715 80.0 0907 716
• From measuring range 12.5 mm for through and blind holes • From measuring range 12.5 mm with carbide tipped measuring faces
• • • •
ON/OFF switch Zero setting at any position mm/inch conversion Data output: 2 versions to choose (see table) - serial interface RS 232 Power - wireless data transfer via Bluetooth • Max/Min value memory
• Hold Function • PRESET Function (setting a numerical value) • Tolerance function
Sets
Measuring range Setting ring dia. mm mm Bluetooth 6 - 10 8.0 10 - 20 12.5 / 20.0 20 - 50 20.0 / 35.0 50 - 100 65.0 / 80.0 without Bluetooth 6 - 10 8.0 10 - 20 12.5 / 20.0 20 - 50 20.0 / 35.0 50 - 100 65.0 / 80.0
Ref. No.
Price Euro
0907 853 0907 855 0907 857 0907 859
1,434.00 1,719.00 2,341.00 2,594.00
0907 753 0907 755 0907 757 0907 759
1,359.00 1,644.00 2,266.00 2,519.00
11
HEIG
H T G AU
GES
DIGI-MET® 3 point internal micrometer
NEW tooth
with Blue
L
S INITIA
E INCLUD
ATION
at e
CALIBR
and f o r ri n g
Inclusive!
Measuring range Measuring depth mm mm 6 8 58 8 - 10 58 10 - 12.5 58 12.5 - 16 62 16 - 20 62 20 - 25 66 25 - 35 66 35 - 50 80 50 - 65 80 65 - 80 80 80 - 100 100
mic
ic
f rti ce ion r rat te calib a e h t i Supplied w om
IP xx
= Waterproof acc. IP
IP 67
DIN 863-4
Specification
Electronic functions
• DIN 863-4 • Reading: 0.001 mm / .00005 inch • Protection class IP67 • With pistol grip • From measuring range 12.5 mm with carbide tipped measuring faces • Rotateable LCD display • For through holes • Certificate for setting ring and micrometer • From measuring range 12.5 mm for through and blind holes • Shipment in wooden case, incl. With setting ring
• • • •
• • • •
ON/OFF switch Zero setting at any position mm/inch conversion Data output: 2 versions to choose (see table) - serial interface RS 232 Power - wireless data transfer via Bluetooth MAX/MIN value memory Hold Function PRESET Function (setting a numerical value) Tolerance function
r
Accuracy µm 4 4 4 4 4 4 4 4 5 5 5
Setting ring dia. Ref. No. mm without Bluetooth 8.0 0908 706 8.0 0908 707 12.5 0908 708 12.5 0908 709 20.0 0908 710 20.0 0908 711 35.0 0908 712 35.0 0908 713 65.0 0908 714 65.0 0908 715 80.0 0908 716
Measuring range mm inch with Bluetooth 1 /4 - 3/8 6 - 10 3 /8 - 3/4 10 - 20 3 /4 - 2 20 - 50 3 /4 - 4 20 - 100 without Bluetooth 1 /4 - 3/8 6 - 10 3 /8 - 3/4 10 - 20 3 /4 - 2 20 - 50 3 /4 - 4 20 - 100
12
Power
= Data output
DIN
= DIN
Price Euro 1,160.00 1,134.00 1,197.00 1,214.00 1,287.00 1,374.00 1,491.00 1,523.00 1,568.00 1,568.00 1,672.00
Ref. No. Bluetooth 0908 806 0908 807 0908 808 0908 809 0908 810 0908 811 0908 812 0908 813 0908 814 0908 815 0908 816
Price Euro 1,235.00 1,209.00 1,272.00 1,289.00 1,362.00 1,449.00 1,566.00 1,598.00 1,643.00 1,643.00 1,747.00
Setting ring dia. mm
Ref. No.
Price Euro
8.0 12.5 / 20.0 20.0 / 35.0 20.0 / 35.0 / 65.0 / 80.0
0908 853 0908 855 0908 857 0908 873
1,482.00 1,737.00 2,252.00 3,688.00
8.0 12.5 / 20.0 20.0 / 35.0 20.0 / 35.0 / 65.0 / 80.0
0908 753 0908 755 0908 757 0908 773
1,407.00 1,662.00 2,177.00 3,613.00
= Bluetooth
Analogue height and scribing gauges Specification • Measuring beam is made from special steel • Vernier and scale are satin chrome finished • Parallax-free reading • Setting screw • À Fine adjustment • Á Accurate fine adjustment on gear rack and setting
wheel with pinion • Steel base with dirt grooves • Scribing possible from base plate level • Factory standard • Shipment with exchangeable scriber, carbide tipped
NEW Á Accurate fine adjustment on gear rack Measuring range Measuring beam mm mm With fine adjustment 300 30 x 12 600 30 x 12 1000 30 x 12 With pinion 300 30 x 12 600 30 x 12 1000 30 x 12
À Fine adjustment
Base mm
Ref. No.
Price Euro
145 x 90 x 44 189 x 118 x 44 189 x 118 x 44
0345 522 0345 530 0345 534
359.00 449.00 619.00
145 x 90 x 44 189 x 118 x 44 189 x 118 x 44
0347 522 0347 530 0347 534
459.00 579.00 799.00
Replacement scribers
Specification
Length
= QuickLock
= QuickStart
IP xx
= Waterproof acc. IP
= Data output
Ref. No.
mm
• Carbide tipped • Packing: individually packed
75 150
DIN
= DIN
0345 910 0345 912
Price Euro 115.00 127.00
13
BEN
CH CEN
TRES
Bench centres
Á
À
Specification integrated V-groove support Á • Quick-clamping device by clamping lever À • With T-groove and support column • With mounting hole for dial gauges dia. 8 mm • Shipment in cardboard box
• Finely ground surface, flatness tolerance according to DIN 876-2 • With two adjustable tailstocks • Left tailstock with fixed centre • Right tailstock with retractable spring mounted centre, free lift appr. 10 mm • Tailstocks can be clamped via an eccentric clamp • Tailstocks height 75 mm with
PROMO Height of centres mm 50 50 75 75
Max. work load per tailstock kg 5 5 5 5
TION
Width between Centre dia. Width of T-grooves centres mm mm mm 200 16 10 350 16 10 200 16 10 350 16 10
Base
Ref. No.
Promotion Price
mm 350 x 110 500 x 110 350 x 110 500 x 110
0780 101 0780 102 0780 104* 0780 105*
Euro 475.00 599.00 549.00 619.00
* with integrated V-groove support on the tailstocks
Pair of V-groove and roller supports for 0780 Application
Height* mm 65 100
• For workpieces without centering • Functional test through applying on e.g. plain lateral surface • Recognition of defects in shape
Width of T-grooves mm 10 12
Surface dia. mm 5 - 25 5 - 50
Ref. No. 0780 032 0780 033
Price Euro 149.00 214.00
* based on the center of an axis of a shaft dia. 10 mm
V-groove surfaces are hardened, replaceable
Height* mm 65 100
Width of T-grooves mm 10 12
Surface dia. mm 3 - 30 4 - 60
* based on the center of an axis of a shaft dia. 10 mm
14
Ref. No. 0780 042 0780 043
Price Euro 178.00 241.00
Runout tolerance of the rollers: 0.005 mm
Our particular strength ! custom-made products for customer requirements High quality precision measuring instruments. Developed and manufactured by us according to your individual requirements and areas of application
Answer: Surname:
Forename:
Company:
DOB.:
E-Mail:
City/zip:
Street:
Country:
By participating in the contest, I agree to the terms and conditions.* I agree that, in case of winning, my name and adress will be published online on the HELIOS-PREISSER GmbH website.** I agree to receive further information about products and events of HELIOS-PREISSER GmbH via e-mail or mail in the future .**
Date, Signature: * Eligibility requirements: Entitled to participate are all persons over the age of 18. Employees of HELIOS-PREISSER GmbH and their relatives are excluded from participation. Participation via lottery clubs, agencies and automated services is not permitted. Each participant may enter the lucky draw only once. Prizes are three get to know-weekends on the Swabian Alb. The winners will be drawn at random and notified by mail or e-mail. If notification fails due to incorrect contact information, another winner will be drawn. A payout in cash is not possible. The Weekend Getaway includes two overnight stays for two persons at a time. The arrival is at your own account. The fringe events will be organised and determined by HELIOS-PREISSER GmbH. The travel period is dependent on the availability of the hotel. The prize will be invalidated, should participation on the relevant date not be possible for the winner. Any recourse to courts of law is excluded. The closing date for the competition is the 29.02.2016. The draw will take place on the 15.03.2016. ** The consent can be revoked towards the HELIOS-PREISSER GmbH at any time and the further use of the data may be cancelled at any time.
HELIOS-PREISSER GmbH SteinbeisstraĂ&#x;e 6 72501 Gammertingen Germany
0000384
3x1 y tawa e G d en Week r two fo
• Illustrations and descriptions are current to the date of printing. •All prices stated are exclusive of VAT. • Photo material courtesy of the city of Gammertingen, Schwäbische Alb Tourismusverband e.V., Eisenbahnfreunde Zollernbahn e.V. and Albmetzgerei Steinhart. • Reproduction and / or duplication in any way, including excerpts, is only permitted with the explicit written consent of HELIOS-PREISSER GmbH.
What is the name of the new
small universal pocket caliper by HELIOS-PREISSER
HELIOS • PREISSER Steinbeisstraße 6 | D-72501 Gammertingen | Tel: +49 7574 400 - 60 | Fax +49 7574 400 - 91 | vertrieb@helios-preisser.de | www.helios-preisser.de HELIOS • PREISSER Steinbeisstraße 6 | D-72501 Gammertingen | Tel: +49 7574 400 - 60 | Fax +49 7574 400 - 91 | vertrieb@helios-preisser.de | www.helios-preisser.de