Firegear Specification Book

2017 SPECIFICATION BOOK

THE BEST ROOM IN THE HOUSE

ISN’T IN THE HOUSE AT ALL

VER: 04-11-17 1

ITEM

PAGE NUMBER

OUTDOOR FIREPLACES FIRE FURNISHINGS IGNITION SYSTEMS

4 12 14 - 17

ROUND BURNES

18

SQUARE BURNERS

22

FLAT DISC

26

L-SERIES

30

NON-LISTED BURNERS

34

AnF OUTDOOR LIVING ENCLOSURES

38

SPUR BURNERS

40

FLEXFRAME

41

PAVER KIT CONTROL PANELS

42

PAVER VENT KITS

43

MEDIA

44

CONTROLS

46

LIDS

48

WINDSHIELDS

49

VENT KIT

50

GAS LINE PIPE SIZING CHART / PROPANE TANK BTU’S

51

CUSTOM ORDER FORM

52

LIVE BURN PROGRAM

54

LITERATURE ORDER FORM

56

WARRANTY

59

HOW TO SIGN UP FOR

Go to www.firegearoutdoors.com and click on the CAD Details icon in the bottom right corner of the home page.

Once on the Firegear Outdoors CAD Detail website, click any product on the page.

Scroll down until you see REGISTER. Click the register button, input the information and finish the sign up process.

Once you are signed up, you then will have access to all of Firegear Outdoors design files.

2

MAP POLICY

MINIMUM ADVERTISED POLICY

Skytech Products Group-Retail, including Skytech Systems and Firegear Outdoors (“SPG-Retail”), a Division of Skytech Products Group, has developed a Minimum Advertised Pricing (MAP) policy (the “Policy”) for all products sold by and purchased from SPG-Retail by and through traditional and/or online retailers (“Products”).

In an effort to protect the image and value of SPG-Retail products and to maintain fair and equitable promotional and sales activity among its distributors, dealers, retailers and other resellers (each, a “Retailer”), SPG-Retail has developed the MAP Policy effective immediately. The MAP Policy and its terms and conditions are as follows:

POLICY Subject to certain exceptions set forth below, no Retailer shall, at any time, advertise or promote any SPG-Retail Products for sale or resale at a price lower than the MAP pricing established by SPG-Retail for such Products.

APPLICATION The MAP Policy shall apply to all promotions and/or advertisements of any Products purchased from SPG-Retail that appear in any media form, including, without limitation, written or electronic flyers, posters, coupons, mailers, inserts, newspapers, magazines, catalogs, mail order catalogs, Internet, online, or similar electronic media, websites, email newsletters, email solicitations, television, radio, and/or public signage. The MAP Policy shall not apply to (a) any in-store advertising displayed by a Retailer, in-store displays, point-of-sale signs, hang tags or bar codes, or similar product price packaging which merely state the price of such product; (b) the promotion or advertisement of discontinued Product, so long as such Product is clearly marked as discontinued within said advertisement or promotion; and (c) the actual price at which any Products are sold to an individual consumer at or from a Retailer’s physical location or via telephone.

OTHER TERMS & CONDITIONS MAP pricing is subject to change from time to time at the sole discretion of SPG-Retail and can be accessed by contacting SPG-Retail Divisions at (888) 672 8929, or by written request via email at skytechii@skytechpg.com or info@firegearoutdoors.com. It shall be the responsibility of all Retailers to remain current as to MAP Policy, pricing, and any changes thereto.

The MAP Policy shall apply to all Products sold to SPG-Retail distributors and resold thereby to any Internet or online dealers and retailers, and such distributors shall take all necessary steps to enforce the MAP Policy in connection with each and every such resale.

By accepting Products from SPG-Retail and in consideration of continued access to Products and the benefits realized as an SPG-Retail preferred, approved Retailer, each Retailer accepts and all Products they purchase from SPG-Retail shall be and remain subject to the MAP Policy as set forth herein. Should it be determined that any Product subject to the MAP Policy is or has been advertised or promoted at a price below the MAP pricing established for said Product by SPG-Retail at any time, the violating Retailer shall immediately take all steps necessary to cure said violation and bring its advertising, promotion, pricing and sales activity into compliance with the MAP Policy. SPG-Retail hereby, at any time, reserves the right to discontinue the shipment of Products to the violating Retailer and/or its distributor, and the right to terminate future sales of Products to said violating Retailer and/or its distributor, subject to the parties’ respective financial and confidential obligations that shall survive such termination.

3

ER TO BE CONSIDERED ACCURATE. 'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER UMBER 5053-009.

KALEA BAY

THESE FIRE PITS FIREPLACES ARE TESTED TO ANSI Z21.97-2014 / CSA 2.41-2014 STANDARDS.

SPECIFICATIONS ROUND BURNER SYSTEMS ROUND STAINLESS STEEL TFS BURNER SYSTEMS

REVISION DATE 06/09/2016 CADdetails.com OPTIONAL ACCESSORIES

MODELS

©2016 CADDETAILS.COM LTD. OFP-36LTFS-N

36” w x 16” h x 16” d opening dimensions. Natural Gas (31,000 Btu on High, 18,500 Btu on Low)

OFP-36LTFS-P

36” w x 16” h x 16” d opening dimensions. Liquid Propane (30,000 Btu on High, 19,500 Btu on Low)

OFP-48LTFS-N

48” w x 16” h x 16” d opening dimensions. Natural Gas (43,500 Btu on High, 24,500 Btu on Low)

OFP-48LTFS-P

48” w x 16” h x 16” d opening dimensions. Liquid Propane (42,500 Btu on High, 29,000 Btu on Low)

OFP-60LTFS-N

60” w x 16” h x 16” d opening dimensions. Natural Gas (50,000 Btu on High, 36,000 Btu on Low)

OFP-60LTFS-P

60” w x 16” h x 16” d opening dimensions. Liquid Propane (50,000 Btu on High, 36,000 Btu on Low)

OFP-72LTFS-N

72” w x 16” h x 16” d opening dimensions. Natural Gas (65,000 Btu on High, 42,000 Btu on Low)

OFP-72LTFS-P

72” w x 16” h x 16” d opening dimensions. Liquid Propane (60,000 Btu on High, 45,000 Btu on Low)

326-930

Driftwood 6 piece twig set

TM-R-AF1TX

Wireless wall mount timer (30/60/120min)

1322WT

Wireless wall mount switch (On/Off/High/Low)

1001D-AF1TX

Wireless wall mount switch (On/Off)

WS

Wired wall mount switch (On/Off)

AF-4000ADP24(80)

110 volts AC adapter, coverts to 7.5 DC volts for TFS systems

AF-4000HAT

Home/Pool automation transmitter system (works with most manufacturers systems)

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

SINGLE SIDED FIREPLACE DIMENSIONS & CLEARANCES LEG HEIGHT F

VALVE BOX DEPTH G

16”

11 1/2"

8 3/4”

6”

42 1/2”

16”

16”

11 1/2”

8 3/4”

6”

42 1/2”

37 1/2”

16”

16”

11 1/2”

8 3/4”

6”

42 1/2”

37 1/2”

16”

16”

11 1/2”

8 3/4”

6”

42 1/2”

MODEL

OVERALL LENGTH A

INSIDE OPENING B

OVERALL OPENING OVERALL HEIGHT HEIGHT DEPTH C D E

OFP-36LTFS-N or P

40”

36"

37 1/2"

16”

OFP-48LTFS-N or P

52”

48"

37 1/2”

OFP-60LTFS-N or P

64”

60"

OFP-72LTFS-N or P

76”

72"

CLEARANCE TO CLEARANCE TO COMBUSTABLE COMBUSTABLE SIDE WALL CEILING H I

E CEILING SIDEWALL

E TOP VIEW

A

E E

TOP VIEW

A

6”

I

6” Hood

B C

D

20”

C F

20”

END VIEW

H 11½”

G G

Bottom Finish Fin

FRONT VIEW END VIEW

4

D

Bottom Finish Fin

F END VIEW

Hood

B

FRONT VIEW

FLOOR

SEE-THROUGH FIREPLACE DIMENSIONS & CLEARANCES LEG HEIGHT F

VALVE BOX DEPTH G

16”

11 1/2"

8 3/4”

36”

42 1/2”

16”

16”

11 1/2”

8 3/4”

36”

42 1/2”

37 1/2”

16”

16”

11 1/2”

8 3/4”

36”

42 1/2”

37 1/2”

16”

16”

11 1/2”

8 3/4”

36”

42 1/2”

MODEL

OVERALL LENGTH A

INSIDE OPENING B

OVERALL OPENING OVERALL HEIGHT HEIGHT DEPTH C D E

OFP-36LTFS-N or P

40”

36"

37 1/2"

16”

OFP-48LTFS-N or P

52”

48"

37 1/2”

OFP-60LTFS-N or P

64”

60"

OFP-72LTFS-N or P

76”

72"

CLEARANCE TO CLEARANCE TO COMBUSTABLE COMBUSTABLE SIDE WALL CEILING H I

E E

TOP VIEW

A

E

TOP VIEW

6”

A

E 6”

C

Hood

B

D

20”

Hood

B C F END VIEW

20”

D G

Bottom Finish Fin

G

FRONT Bottom Finish Fin VIEW

F END VIEW

FRONT VIEW

CEILING SIDEWALL

I

END VIEW

H 11½” FLOOR

5

KALEA BAY FRAMING DIMENSIONS FOR BOTH SINGLE SIDED & SEE-THROUGH

METAL STUDS A HEIGHT B

DEPTH C

OFP-L36TFS-N or P

40 1/2”

37 3/4"

16”

OFP-L48TFS-N or P

52 1/2”

37 3/4”

16”

OFP-L60TFS-N or P

64 1/2”

37 3/4”

16”

OFP-L72TFS-N or P

76 1/2”

37 3/4”

16”

WIDTH A

HEIGHT B

DEPTH C

C Metal Studs

Metal Studs

WIDTH A

Metal Studs

MODEL

Metal Studs

Hood

*Metal studs shown in gray.

B

Bottom Support Fin

WOOD STUDS

52”

49 1/2"

28”

OFP-L48TFS-N or P

64”

49 1/2”

28”

OFP-L60TFS-N or P

76”

49 1/2”

28”

OFP-L72TFS-N or P

88”

49 1/2”

28”

Standoffs

Wood Studs

Wood Studs Standoffs

Wood Studs

OFP-L36TFS-N or P

A

C Wood Studs Wood Studs

MODEL

B

Hood

*Wood studs shown in gray.

Bottom Support Fin

NOTE: The Kalea Bay fireplace is not a “load bearing” fireplace. All finishing materials must be supported by the surrounding structure and not rely on the fireplace itself.

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

6

CONVERTING KALEA BAY INTO A SEE-THROUGH FIREPLACE If you have determined to install the fireplace as a see-through model then you will need to remove the rear back panel to convert it. Before removing the back panel be sure to remove the contents out of the firebox area.

Use the following steps: Step 1: Look at the back side of the fireplace. Around the outer perimeter area of the frame or back wall are several screws to remove.

Note: The numbers of screws to remove will vary with each fireplace model.

Watch for sharp edges Step 2: The back panel will not be used again in the see-through application. Keep the back panel and screws if you need to switch the unit back to a single sided unit.

Side View Detail for Removal Rear Panel Screws

BACK VIEW REAR PANEL INSTALLED

BACK VIEW REAR PANEL REMOVED

Bottom Finish Fin

NOTE: When converting to the see-through fireplace the windshield clips will need to be installed. Two windshield clips are already installed for a single-sided fireplace, the other two clips will need to be installed for a see-through model. The clips will be packaged with the glass windshields. The retaining screws for the clips are already installed in the fireplace. Simply remove the screws and re-attach with the windshield clips in place.

The see-through fireplace requires both windshields to be intalled for proper operation.

The bottom support fin has pre-punched holes on the inside edge to secure fin into place before attaching cement board and the additional hood will need to be installed.

7

OD42 SPECIFICATIONS

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

Tested to CAN/CGA-2.17-M91 / IAS 4-96 (US) / CGA CR97-003 (CAN) 4001172

MODELS

OPTIONAL ACCESSORIES

OD42-N

Outdoor Linear Fireplace includes 2’’ Brushed Stainless Steel Faceplate, Copper Reflective Glass, Weather Cover, Wall Switch - Natural Gas

326-900

Steel stud framing kit. Overall dimensions 60” wide x 20” deep x 52 1/2” high

OD42-P

Outdoor Linear Fireplace includes 2’’ Brushed Stainless Steel Faceplate, Copper Reflective Glass, Weather Cover, Wall Switch - Propane

326-930

Driftwood 6 piece twig set

OD42-4-N Outdoor Linear Fireplace includes 4’’ Brushed Stainless Steel Faceplate, Copper Reflective Glass, Weather Cover, Wall Switch - Natural Gas OD42-4-P Outdoor Linear Fireplace includes 4’’ Brushed Stainless Steel Faceplate, Copper Reflective Glass, Weather Cover, Wall Switch - Propane SELECT SELECTDESIRED DESIREDSYSTEM: SYSTEM: NATURAL NATURALGAS: GAS:

1001-A OUTDOORS Wireless hand held remote (On/Off) FIREGEAR FIREGEAR OUTDOORS

VENT-KIT-6X12 Includes 9230 9230 CONSERVATION CONSERVATION WAY WAY two (2) 6” tall x 12” wide vents with mounting screws FORT FORTWAYNE, WAYNE,ININ46809 46809 TOLL TOLLFREE: FREE:1-888-672-8929 1-888-672-8929 NOTES FAX: FAX:(888) (888)672-8024 672-8024 HIGH ELEVATION: This unit is approved from altitude 0 to 4500 ft www.firegearoutdoors.com www.firegearoutdoors.com (CAN12.17-M91)

LPLPGAS: GAS:

OD42-N OD42-N

OD42-P OD42-P

OD42-N or P SYSTEM INFO

OD42-N or P DIMENSIONS 39391/2" 1/2" 1/4" 35351/4" 22225/8" 5/8" HEAT HEATSHIELD SHIELD 5/8" 5/8"

1/2" 10" 10" 11111/2"

FIREGEAR FIREGEAROUTDOORS OUTDOORS 9230 9230CONSERVATION CONSERVATIONWAY WAY 23235/16" 5/16" FORT FORTWAYNE, WAYNE,IN IN46809 46809 TOLL TOLLFREE: FREE:1-888-672-8929 1-888-672-8929 FAX: FAX:(888) (888)672-8024 672-8024 6 63/4" 3/4" www.firegearoutdoors.com www.firegearoutdoors.com

32327/16" 7/16"

17"12123/4" 3/4" 17"

SELECT SELECTDESIRED DESIREDSYSTEM: SYSTEM: NATURAL NATURALGAS: GAS:

MODEL BTU FACTORY BTU SPECIFICATIONS ORIFICE OUTPUT

15159/16" 9/16"

FRONT FRONTVIEW VIEW

6 65/16" 5/16"

OD42-N

#29

44,500

OD42-P

#47

43,500

PRESSURE

GAS TYPE NG

GAS TYPE LP

MIX INLET

5.0”WC

11.0”WC

MAX INLET

14.0”WC

14.0”WC

MANIFOLD

3.5”WC

10.0”WC

SIDE SIDEVIEW VIEW

LP LPGAS: GAS:

FEATURES: FEATURES:OD42 OD42FIREPLACE FIREPLACEHAS HASA ASTAINLESS STAINLESSSTEEL STEELFIREBOX FIREBOXWITH WITHREFLECTIVE REFLECTIVEPANELS, PANELS,30" 30"STAINLESS STAINLESSSTEEL STEELBURNER, BURNER,COPPER COPPERREFLECTIVE REFLECTIVE OD42-4-N OD42-4-N OD42-4-P OD42-4-P IGNITION, FIREGLASS, FIREGLASS, BATTERY BATTERYOPERATED OPERATEDELECTRONIC ELECTRONIC IGNITION,TEMPERED TEMPEREDGLASS GLASSWINDSHIELD WINDSHIELDWITH WITHBLACK BLACKPOLYESTER POLYESTERCOVER, COVER,2"2"STAINLESS STAINLESSSTEEL STEEL TRIM TRIMAND ANDON/OFF ON/OFFWALL WALLSWITCH. SWITCH.ROUGH ROUGHFRAMING FRAMINGDIMENSIONS DIMENSIONSARE ARE43431/16" 1/16"WIDE WIDEX X323211/16" 11/16"TALL TALLX X20" 20"DEEP DEEP(STEEL (STEELSTUDS STUDSMUST MUSTBEBEUSED).

USED).SEE SEE OD42 OD42INSTALL INSTALLMANUAL MANUALFOR FORMORE MOREDETAILS. DETAILS.

OD42-4-N or P DIMENSIONS

OD42-4-N or P SYSTEM INFO

43 431/4" 1/4"

DISCLAIMER: DISCLAIMER:BTU BTULISTINGS LISTINGSARE AREBASED BASEDON ON7.0" 7.0"WC WCFOR FORNATURAL NATURALGAS GAS(NG) (NG)AND AND11.0" 11.0"WC WCFOR FORLIQUID LIQUIDPROPANE PROPANE(LP) (LP)ATATTHE THEBURNER BURNERORIFICE. ORIFICE. BTU MODEL 35 351/4" 1/4" 15 15 9/16" 9/16" FROM FLEX FLEXLINE LINESIZE SIZEAND ANDPROPER PROPERGAS GASPIPE PIPESIZING SIZINGWILL WILLALSO ALSOAFFECT AFFECTBTU'S. BTU'S.ASASA ARESULT RESULTYOUR YOURBTU'S BTU'SMAY MAYVARY VARY SLIGHTLY SLIGHTLY FROMTHE THELISTED LISTEDBTU BTU SPECIFICATIONS 22 225/8" 5/8" SPECIFICATIONS. SPECIFICATIONS.

MODEL MODELBTU BTU FACTORY FACTORYHEAT ORFICE ORFICE BTU BTUOUTPUT OUTPUT HEAT SHIELD SHIELD SPECIFICATIONS SPECIFICATIONS #29 #29 44,500 44,500 OD42-N OD42-N #47 #47 43,500 43,500 OD42-P OD42-P

11 111/2" 1/2" 10" 10" GAS PRESSURE PRESSURE 5/8" GAS GASTYPE TYPENG NG GASTYPE TYPELPLP 5/8"

MIN. MIN.INLET INLET MAX. MAX.INLET INLET MANIFOLD MANIFOLD

5.0" 5.0"WC WC 14.0" 14.0"WC WC 3.5" 3.5"WC WC

OD42-4-N

#29

44,500

OD42-4-P

#47

43,500

11.0" 11.0"WC WC 14.0" 14.0"WC WC 10.0" 10.0"WC WC

NOTES: NOTES: PRESSURE 32 327/16" 7/16" 1.1.THESE THESEFIREPLACE FIREPLACEMODELS MODELSARE ARESHIPPED SHIPPEDASASNATURAL NATURALGAS GAS ORORLPLPGAS GASAND ANDMUST MUSTBEBEORDERED ORDEREDACCORDINGLY. ACCORDINGLY.THERE THEREISISNO NOCONVERSION CONVERSIONKIT. KIT. 12PITS 3/4" 12 3/4" 20 3/4" 3/4" 2.2.20 ALL ALL FIRE FIRE PITS REQUIRE REQUIRE18-SQUARE 18-SQUAREINCHES INCHESOFOFCROSS CROSS FLOW FLOWVENTILATION VENTILATIONPER PERSIDE SIDEOFOFENCLOSURE. ENCLOSURE. 25 255/16" 5/16" 3.3. ALL ALLFIREPLACE FIREPLACEINSTALLATIONS INSTALLATIONSSHOULD SHOULDPROVIDE PROVIDEACCESS ACCESS TOTO VALVE VALVE SYSTEMS SYSTEMS ASAS WELL WELLASAS ALL ALLGAS GAS CONNECTIONS. CONNECTIONS. MIX INLET 4.4.ALWAYS ALWAYSADHERE ADHERETOTOYOUR YOURSTATE STATEAND ANDLOCAL LOCALCODES CODES WHEN WHENINSTALLING INSTALLINGA AFIRE FIREPIT. PIT. 5.5.DRAWINGS DRAWINGSNOT NOTTOTOSCALE. SCALE. MAX INLET 6.6.THIS THISDRAWING DRAWINGISISINTENDED INTENDEDFOR FORUSE USEBYBYARCHITECTS, ARCHITECTS,ENGINEERS, ENGINEERS,CONTRACTORS, CONTRACTORS,CONSULTANTS CONSULTANTSAND ANDDESIGN DESIGNPROFESSIONALS PROFESSIONALSFOR FORPLANNING PLANNINGPURPOSES PURPOSES ONLY. ONLY.THIS THISDRAWING DRAWINGMAY MAY NOT NOTBEBEUSED USEDFOR FORCONSTRUCTION. CONSTRUCTION. 663/4" 3/4" 7.7.ALL ALLINFORMATION INFORMATIONCONTAINED CONTAINEDHEREIN HEREINWAS WASCURRENT CURRENTATATTHE THETIME TIMEOFOFDEVELOPMENT DEVELOPMENTBUT BUTMUST MUSTBEBEREVIEWED REVIEWEDAND ANDAPPROVED APPROVEDBYBYTHE THEPRODUCT PRODUCTMANIFOLD MANUFACTURER MANUFACTURERTOTOBEBECONSIDERED CONSIDEREDACCURATE. ACCURATE. 4AND 45/16" 5/16" EE R KE K TE TR 8.8.CONTRACTOR'S CONTRACTOR'SNOTE: NOTE:FOR FORPRODUCT PRODUCTAND ANDCOMPANY COMPANYINFORMATION INFORMATIONVISIT VISITwww.CADdetails.com/info www.CADdetails.com/infoAND ENTER ENTER I NI N REFERENCE REFERENCENUMBER NUMBER5053-001.

5053-001.

FRONT FRONTVIEW VIEW SIDE SIDEVIEW VIEW

8

OD42 OD42

FACTORY BTU ORIFICE OUTPUT

CMCM

FEATURES: FEATURES:OD42 OD42FIREPLACE FIREPLACEHAS HASAASTAINLESS STAINLESSSTEEL STEELFIREBOX FIREBOXWITH WITHREFLECTIVE REFLECTIVEPANELS, PANELS,30" 30"STAINLESS STAINLESSSTEEL STEELBURNER, BURNER,COPPER COPPERREFLECTIVE REFLECTIVE FIREGLASS, FIREGLASS,BATTERY BATTERYOPERATED OPERATEDELECTRONIC ELECTRONICIGNITION, IGNITION,TEMPERED TEMPEREDGLASS GLASSWINDSHIELD WINDSHIELDWITH WITHBLACK BLACKPOLYESTER POLYESTERCOVER, COVER,4"4"STAINLESS STAINLESSSTEEL STEEL US US OD42 OD42 OUTDOOR OUTDOOR FIREPLACE FIREPLACE TRIM TRIMAND ANDON/OFF ON/OFF WALL WALL SWITCH. SWITCH.ROUGH ROUGH FRAMING FRAMINGDIMENSIONS DIMENSIONSARE ARE43431/16" 1/16"WIDE WIDEXX323211/16" 11/16"TALL TALLXX20" 20"DEEP DEEP(STEEL (STEELSTUDS STUDSMUST MUSTBE BEUSED).

USED).SEE SEE

GAS TYPE NG

GAS TYPE LP

5.0”WC

11.0”WC

14.0”WC

14.0”WC

3.5”WC

10.0”WC

MINIMUM CLEARANCES TO COMBUSTIBLES The clearances listed below are Minimum distances unless otherwise stated.

A major cause of fire is failure to maintain required clearances (air space) to combustable materials. It is of the greatest importance that the fireplace be installed only in accordance with these instructions.

When selecting a location for your fireplace, ensure that the proper clearances are met. Please refer to the product install manual for the measurement points to maintain proper distances.

Clearance

Dimension

Measured From

A: Sidewall

11’’ (203mm)

Side of fireplace opening

B: Ceiling

36’’ (914mm)

Top of fireplace opening

C: Mantel Height (min)

26 1/2’’ (673mm)

Top of fireplace opening

D: Mantel Depth (max)

12’’ (304mm)

From wall

E: Alcove Width

57’’ (1148mm)

Wall to wall (min)

F: Alcove Depth

36’’ (914mm)

Front to back wall (max)

Notes:

0’’

No hearth required

This table corresponds with the images below

FIREGEAR OUTDOORS 9230 CONSERVATION WAY FORT WAYNE, IN 46809 TOLL FREE: 1-888-672-8929 FAX: (888) 672-8024 www.firegearoutdoors.com SELECT DESIRED SYSTEM: OD42 FRAMING KIT 326-900

OD42 FRAMING KIT MODEL #: 326-900 60" 18"

HE AT

SH IE

LD

18 1/2"

52 1/2"

11"

20" ISOMETRIC

OD42 FRAMING KIT CONTAINS: (2) TOP/BOTTOM SUPPORTS, (8) TALL VERTICAL SUPPORTS, (6) SHORT VERTICAL SUPPORTS, (1) BASE, (1) HEADER, (2) CORNER BRACES, (1) CENTER VERTICAL SUPPORT, (1) VENT-KIT-6X12 AND (80) WAFER SCREWS.

9

KEY WEST SEE-THROUGH SPECIFICATIONS

OPTIONAL ACCESSORIES

MODELS KWST-42-N KWST-42-P

KWST-82-N KWST-82-P

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

(1) FPB-30LTFS-N or P, Steel Stud Framing Kit (KD - Knock Down) Ready to assemble, pre-drilled and labeled. Stainless Steel Reflective Side Walls and Ceiling Panel, Fireglass (10lb.), GWS-3810 Glass Windshield, On/Off/High/Low Remote Control (RCAF-3), VENT-KIT-6x12

377-909

Key West See Through kit propane drawer kit (KWST-42-N only)

326-930

Driftwood 6 piece twig set

TM-R-AF1TX

Wireless wall mount timer (30/60/120min)

1322WT

Wireless wall mount switch (On/Off/High/Low)

(2) FPB-30LTFS-N or P, Ready to Finish Enclosure (Assembled), Fireglass (20lb.), GWS-6810 Glass Windshield, On/Off/High/Low Remote Control (RCAF-3), VENT-KIT-6x12

1001D-AF1TX

Wireless wall mount switch (On/Off)

WS

Wired wall mount switch (On/Off)

AF-4000ADP24(80)

110 volts AC adapter, coverts to 7.5 DC volts for FIREGEAR OUTDOORS TFS systems

NOTES

9230automation CONSERVATION Home/Pool transmitterWAY system (works with most manufacturers FORT WAYNE,systems) IN 46809

AF-4000HAT

KWST-42-N or P uses one (1) FPB-30LTFS-N or P

Linear stainless steel lid with brushed finish for TOLL FREE: 1-888-672-8929 the KWST-42

LID-30L

KWST-82-N or P uses two (2) FPB-30LTFS-N or P

FAX:steel (888)lid672-8024 Linear stainless with brushed finish for the KWST-82 www.firegearoutdoors.com

LID-68L

FIREGEAR OUTDOORS 9230 CONSERVATION WAY SELECT DESIRED SYSTEM: FORT WAYNE, IN 46809 NATURAL GAS: LP GAS: TOLL FREE: 1-888-672-8929 KW42ST-N KW42ST-P KWST-42 SPECIFICATIONS FAX: (888) 672-8024 www.firegearoutdoors.com

8 1/2" 42" 20 1/2"

51" 8 1/2"

Non-Combistible board with vent installed

42" 20 1/2"

51"

19"

11"

64 1/16" FRAMING PERSPECTIVE 2" 19"

11"

64 1/16"

9 1/4" 4 7/8"

FRAMING PERSPECTIVE

37" CUT OUT DIMENSIONS FOR BURNERS

2"

The area below the burner must remain PERSPECTIVE empy to allow proper air ventilation

FEATURES: KWST42 SYSTEM COMES WITH EITHER 9 1/4"(1) FPB-30LTFS-N OR (1) FPB-30LTFS-P BURNERS, READY TO ASSEMBLE FRAMING KIT, 20 LBS OF FIREGLASS, GWS-3812 GLASS WINDSHIELD WITH BLACK POLYESTER COVER, RCAF-3 (ON/OFF/HI/LO) REMOTE CONTROL AND (1) VENT-KIT-6X12.

SEE LINEAR TFS FIRE PITS FOR BURNER DETAILS.

4MODEL 7/8" BTU

FACTORY BTU OUTPUT BTU OUTPUT TYPE (LP) NG AT THE GAS TYPE ORIFICE. LP DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0" WC FOR NATURAL GAS (NG) ANDPRESSURE 11.0" WC FOR LIQUIDGAS PROPANE BURNER SPECIFICATIONS ORIFICE HIGH LOW 37"

FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO AFFECT BTU'S. AS A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM THE LISTED BTU SPECIFICATIONS. #35 42,000 23,000 MIN INLET 5.0” WC 10.5” WC

CUT OUT DIMENSIONS FOR BURNERS

FPB-30LTFS-N

MODEL BTU

BTU OUTPUT

#47READY 42,000 1) FPB-30LTFS-NFPB-30LTFS-P OR (1) FPB-30LTFS-P BURNERS, TO ASSEMBLE FRAMING KIT,30,000 20 LBS OF FACTORY ORFICE SPECIFICATIONS HI LACK POLYESTER COVER, RCAF-3 (ON/OFF/HI/LO) REMOTE CONTROL AND (1) VENT-KIT-6X12. #35 42,000 FPB-30LTFS-N E LINEAR TFS FIRE PITS FOR BURNER DETAILS.

FPB-30LTFS-P

#47

42,000

BTU OUTPUT MAX INLET PRESSURE LOW MIN. INLET 23,000 MANIFOLD MAX. INLET 30,000 MANIFOLD

10.5” WC NG GAS TYPE

5.0"WC WC 7.0”

10.5" WC 7.0" WC

13.0” GAS TYPEWC LP

10.5" 11.0”WC WC 13.0" WC 11.0" WC

C FOR NATURAL GAS (NG) AND 11.0" WC FOR LIQUID PROPANE (LP) AT THE BURNER ORIFICE. ALSO AFFECT BTU'S. AS A RESULT NOTES:YOUR BTU'S MAY VARY SLIGHTLY FROM THE LISTED BTU 1. THESE FIREPLACE MODELS ARE SHIPPED AS NATURAL GAS OR LP GAS AND MUST BE ORDERED ACCORDINGLY. THERE IS NO CONVERSION KIT. SPECIFICATIONS. 10

OUTPUT

2. ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE.

BTU OUTPUT 3. ALL FIREPLACE INSTALLATIONS SHOULD PROVIDE ACCESS TO VALVE SYSTEMS AS WELL AS ALL GAS CONNECTIONS.

9230 CONSERVATION WAY SELECT DESIRED SYSTEM: FORT NATURAL GAS:

WAYNE, LP GAS: IN 46809 TOLL FREE:KWST-82-P 1-888-672-8929 KWST-82-N KWST-82 SPECIFICATIONS FAX: (888) 672-8024 www.firegearoutdoors.com

6 3/4"

2 81 1/2"

19 1/2"

54 1/2" 11"

6 3/4"

79 1/4"

24" 81 1/2"

Finished side with vent installed

27 3/4"

102"

19 1/2"

54 1/2" 11"

79 1/4"

27 3/4"

7 1/2" 8 3/8"

102" 6"

The area below the burner must remain empy to allow proper air ventilation 7 1/2"

67"

8 3/8"

FEATURES: KWST82 SYSTEM COMES WITH EITHER (2) FPB-30LTFS-N OR (2) FPB-30LTFS-P BURNERS, READY TO FINISH ASSEMBLED ENCLOSURE, 20 LBS OF FIREGLASS, 377-955 GLASS WINDSHIELD WITH BLACK POLYESTER COVER, TWO RCAF-3 (ON/OFF/HI/LO) REMOTE CONTROLS AND (1) VENT-KIT-6X12.

SEE LINEAR TFS FIRE PITS FOR BURNER DETAILS. MODEL BTU FACTORY BTU OUTPUT BTU OUTPUT

SPECIFICATIONS 6"

ORIFICE 67"

HIGH

PRESSURE

LOW

GAS TYPE NG

GAS TYPE LP

DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0" WC FOR NATURAL GAS (NG) AND 11.0" WC FOR LIQUID PROPANE (LP) AT THE BURNER ORIFICE.

(2) FPB-30LTFS-N #35 MIN INLET WCSLIGHTLY FROM 10.5” WC FLEX LINE SIZE AND PROPER GAS PIPE84,000 SIZING WILL ALSO46,000 AFFECT BTU'S. AS A RESULT YOUR BTU'S MAY5.0” VARY THE LISTED BTU (2) FPB-30LTFS-P

#47

84,000

60,000

SPECIFICATIONS.

MAX INLET

MANIFOLD PB-30LTFS-N OR (2) FPB-30LTFS-P BURNERS, READY TO FINISH ASSEMBLED ENCLOSURE, MODEL BTU BTU OUTPUT BTU OUTPUT FACTORY ORFICE PRESSURE H BLACK POLYESTER COVER, TWO RCAF-3 (ON/OFF/HI/LO) REMOTE CONTROLS AND (1) SPECIFICATIONS HI LOW SEE LINEAR TFS FIRE PITS FOR BURNER DETAILS. #35 84,000 MIN. INLET FPB-30LTFS-N (2) 46,000

FPB-30LTFS-P (2)

#47

84,000

60,000

R NATURAL GAS (NG) AND 11.0" WC FOR LIQUID PROPANE (LP) AT THE BURNER ORIFICE. O AFFECT BTU'S. AS A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM THE LISTED BTU NOTES: SPECIFICATIONS.

MINIMUM CLEARANCES TO COMBUSTABLES

MAX. INLET MANIFOLD

10.5” WC

13.0” WC

7.0” WC

11.0” WC

GAS TYPE NG 5.0" WC 10.5" WC 7.0" WC

GAS TYPE LP 10.5" WC 13.0" WC 11.0" WC

1. THESE FIREPLACE MODELS ARE SHIPPED AS NATURAL GAS OR LP GAS AND MUST BE ORDERED ACCORDINGLY. THERE IS NO CONVERSION KIT. 2. ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. 3. ALL FIREPLACE INSTALLATIONS SHOULD PROVIDE ACCESS TO VALVE SYSTEMS AS WELL AS ALL GAS CONNECTIONS. TPUT BTU OUTPUT 4. ALWAYS ADHERE TO YOUR STATE LOCAL INSTALLING A FIRE PIT. PRESSURE GASAND TYPE NG CODES GASWHEN TYPE LP LOW 5. KWST82 MODELS MUST SHIP LTL ONLY. SKID SIZE IS 104" LONG X 48" WIDE X 59 1/2" TALL. ESTIMATED SHIPPING WEIGHT IS 720 LBS. 0 INLET 5.0" WC 10.5" WCINTO THE ENCLOSURE FOR AMPLE VENTILATION. SEE PERSPECTIVE DRAWING. 46,000 Model Ceiling Side Wall Floor 6. 6X12 VENTSMIN. MUST BE INSTALLED APPROXIMATELY MID-WAY A 0 10.5" WC 13.0" WC 60,000 7. DRAWINGS MAX. NOT TOINLET SCALE. MANIFOLD 7.0" WC 11.0" WC 8. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES KWST-42-N or P 45 17 22 B ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. 9.

ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT OR LP GAS AND MUST BE ORDERED ACCORDINGLY. THERE17 IS NO CONVERSION KWST-82-N or P 45 27 3/4KIT. C MANUFACTURER TO BE CONSIDERED ACCURATE. W VENTILATION PER SIDE OF ENCLOSURE. 10. AS CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER S TO VALVE SYSTEMS WELL AS ALL GAS CONNECTIONS. REFERENCE NUMBER 5053-005.

N INSTALLING A FIRE PIT. ONG X 48" WIDE X 59 1/2" TALL. ESTIMATED SHIPPING WEIGHT IS 720 LBS. AY INTO THE ENCLOSURE FOR AMPLE VENTILATION. SEE PERSPECTIVE DRAWING.

KEY WEST SEE THRU

GINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES KWST82 SYSTEM ON. HE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT

5053-005

REVISION DATE

RMATION VISIT www.CADdetails.com/info AND CADDETAILS.COM ENTER PROTECTED

BY COPYRIGHT ©2016 LTD.

RU

CADd

11

KEY WEST BISTRO SPECIFICATIONS

Tested and listed by Intertek for installation in USA and Canada

MODELS

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

OPTIONAL ACCESSORIES

KWBTO-L-IG

Key West Bistro Table with Iron Grey Base and Top, KWBTO-L, 286-924 Iron Grey Top, 34,000 Btu Liquid Propane. Requires 10 lbs. of Fireglass (sold separately).

KWBTO-L-SS

Key West Bistro Table with Iron Grey Base and Stainless Steel Top, 286-927 Stainless Steel Top, 34,000 Btu Liquid Propane. Requires 10 lbs. of Fireglass (sold separately).

286-968

Key West Bistro Table Natural Gas conversion kit

326-930

Driftwood 6 piece twig set

286-932

Tempered Glass Windshield (14 1/2” Long x 14 1/2” Wide x 6” Tall) Black Polyester Cover included

286-938

Protective Weather Cover

DIMENSIONS

Shown with optional Glass Windshield (286-932)

CLEARANCE TO COMBUSTIBLES CLEARANCE

DIMENSION

MEASURED FROM

A: Back Wall

17” (432mm)

Burner to back wall

B: Side Wall

17” (432mm)

Burner to side wall

C B A

C: Ceiling

45” (1143mm)

Burner to ceiling

D1: Floor

0” When using supplied leveling legs

D2: Floor

1” (25mm)

Unit base to floor

E: Alcove Width

84” (2134mm)

Wall to wall MIN

F: Alcove Depth

60” (1524mm)

Front to back wall MAX

E F C D B A E F

D

12

KEY WEST COFFEE TABLE SPECIFICATIONS MODELS KWCH-P-SS

KWCH-P-BR

Tested and listed by Intertek for installation in USA and Canada

OPTIONAL ACCESSORIES Key West Coffee Table with Stainless Steel Top, KWCH-L1, 377-927 Table Top, 49,000 Btu Liquid Propane. Requires 10 lbs. of Fireglass (sold separately).

Key West Coffee Table with Sunset Bronze Top, KWCH-L1, 377-926 Table Top, 49,000 Btu Liquid Propane. Requires 10 lbs. of Fireglass (sold separately).

376-968

Natural Gas conversion kit for Key West Coffee Table (KWCH-P-SS & KWCH-P-BR), 50,000 BTU

326-930

Driftwood 6 piece twig set

GWS-3812

Tempered Glass Windshield (38” Long x 12 7/8” Wide x 7 1/2” Tall)

376-029

Black Polyester Cover for GWS-3812

377-938

Protective Weather Cover for Key West Coffee Table

DIMENSIONS This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

CLEARANCE TO COMBUSTIBLES CLEARANCE

DIMENSION

MEASURED FROM

A: Back Wall

17” (432mm)

Burner to back wall

B: Side Wall

17” (432mm)

Burner to side wall

C B A

C: Ceiling

45” (1143mm)

Burner to ceiling

D1: Floor

0” When using supplied leveling legs

D2: Floor

1” (25mm)

Unit base to floor

E: Alcove Width

84” (2134mm)

Wall to wall MIN

F: Alcove Depth

60” (1524mm)

Front to back wall MAX

E F C D B A E F

D

13

IGNITION SYSTEMS MATCH THROW (MT)

GAS FLEX LINE TO BURNER

INCOMING GAS LINE

KEY VALVE

HOW TO LIGHT 1. Insert key into shut-off valve and secure key onto square end of the valve.

2. Light a long match or Butane lighter and hold it near the burner.

3. Turn the key counter-clockwise on gas valve (until it stops) to allow gas to flow and simultaneously apply the long burning match or Butane lighter as close to the end of the burner as possible.

4. Gas should ignite within 10 seconds or less. If fire pit does not light within 10 seconds turn key clockwise to turn OFF the gas supply. Ensure there is not too much media on top of the burner that might inhibit gas flow and try again in 5-minutes. Please refer to page 42 for the recommended amount of media to install for your pan size.

Expanded View of Match Throw (MT) Fire Pits

EXPANDED VIEW

Fire Pit Pan Spur Burner 7/8� Washer Brass Nut OASNG#

(Burner Orifice)

U3-8D-S (Fitting)

Note: Use joint compound or Teflon tape resistant to all gasses on all male NPT threads; not flared fittings.

Ensure all connections are tight and check for gas leaks before and after assembly is complete.

U1-8D-S (Fitting)

T200-9898-46 (Flex Connector)

BVS

(Manual Key Valve)

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

KC-PC

U1-8D-S

(Decorative Flange)

(Not Supplied)

Inlet Gas Supply

14

MT Expanded View

REV. 2-16-17

THERMOCOUPLE MANUAL SAFETY (TMS)

GAS FLEX LINE TO BURNER

THERMOCOUPLE CONNECTION

INCOMING GAS LINE THERMOCOUPLE VALVE

HOW TO LIGHT 1.

2.

3.

4.

Light a long match or Butane lighter and hold it near the burner.

Rotate the control knob of the gas valve counter-clockwise to the ON position.

Depress control knob inward and push to light the burner at the same time.

After the fire pit lights continue to depress the control knob for 30 seconds then release knob. If the fire pit does not light within 30 seconds, release knob, turn knob clockwise to turn OFF and wait 5 minutes before trying again.

Expanded View of Thermocouple Manual (TMS) Safety Fire Pit

EXPANDED VIEW

Fire Pit Pan Spur Burner 7/8” Washer Male Threads: Requires Compound or Tape

Brass Nut

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

OASNG#

Note: Use joint compound or Teflon tape resistant to all gasses on all male NPT threads; not flared fittings.

Ensure all connections are tight and check for gas leaks before and after assembly is complete.

(Burner Orifice)

U3-8D-S (Fitting) (No compound/tape on flared fittings)

This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

T200-9898-46 (Flex Connector)

Thermocouple Manual Gas Valve (ST3-080-1009)

Mounting Nut

Inlet Gas Supply

Knob U1-8C-S (Fitting) 48-86

(Fitting not supplied: ½” Flare to 3/8” Male Thread Fitting)

TMS Expanded View

REV. 2-16-17

15

IGNITION SYSTEMS

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

THERMOCOUPLE FLAME SENSE (TFS) HOW TO LIGHT 1. Press the ON button on the hand-held remote transmitter. You will hear the igniter probe begin sparking for 15 seconds and the fire pit will ignite.

2. If the fire pit does not light the module will start to “beep” one time every second indicating an ignition error. If this occurs press the OFF button on the transmitter and repeat step 1.

3. If fire pit does not light after second try, turn main gas OFF, wait 5 minutes and repeat steps 1-3.

EXPANDED VIEW

Expanded View of Thermocouple Flame Sense (TFS) Fire Pits

Spur Burner

Flat Disc Pan

Ignition Hood

7⁄8” Washer Brass Nut

OAS-NG#

(Burner Orifice)

Orange Ignition Wire (3) 7⁄8” Washers Thermocouple & Ground Wires

½” Coupler

Battery Pack Black Wire

Valve Box:

(Gas valve,control module and wires inside)

T-200-9898-46 (Flex Conector)

Inlet Gas Supply Note: Use joint compound or Teflon tape resistant to all gasses on all male NPT threads; not flared fittings.

Ensure all connections are tight and check for gas leaks before and after assembly is complete.

16 TFS Expanded View

REV. 2-16-17

WHATS IN THE BOX?

ROUND | SQUARE | DISC

TFS Wiring Diagram TFS Wiring Diagram Ignitor Assembly

GAS FLEX LINE INCOMING GAS LINE

I

BATTERY PACK

VCS-5000MODTC Module

Black (Ground)

OUT PILOT ADJ

Learn AUX

Red

Low Rate Set Screw

PILOT

POWER

NOTE: The battery box should not be located inside the stainless steel enclosure. The battery box must be installed in a NEMA 3R Enclosure. It needs to be readily accessible to the end user in order to perform maintenance.

IN

MAIN

White

S

Latching Solenoid-DC Motor Drive

Remote/OFF

Black Red

Black (4-Pin Connector)

Black

IGNITOR CONNECTION

VALVE BOX

Orange

Copper (Thermocouple Ground Wire)

Battery Pack

(Ignitor) Tan (Sensor)

Orange

Green White

Black (-)

2-Brown

Red (+) 4-21-16

WHATS IN THE BOX?

LINEAR | L-SERIES

Pilot Assembly

TFS Linear Wiring Diagram

VALVE BOX

VCS-5000MODTC Module

Black (Ground)

OUT PILOT ADJ

Learn AUX

Red

Low Rate Set Screw

PILOT

POWER MAIN

White

IN

Green White

Orange 2-Brown

INCOMING GAS LINE

S

Latching Solenoid-DC Motor Drive

Remote/OFF

Black Red

Black (4-Pin Connector)

Black

PILOT CONNECTION

I

Battery Pack

(Ignitor) Tan (Sensor)

Orange

Copper (Thermocouple Ground Wire)

Black (-)

BATTERY PACK

GAS FLEX LINE

NOTE: The battery box should not be located inside the stainless steel enclosure. The battery box must be installed in a NEMA 3R Enclosure. It needs to be readily accessible to the end user in order to perform maintenance.

Red (+)

17

10.5" WC 7.0" WC

13.0" WC 11.0" WC

A C A C

SELECT DESIRED SYSTEM:

FAX: (888) 672-8024 www.firegearoutdoors.com

ROUND BURNER SYSTEMS SPECIFICATIONS SELECT DESIRED NATURAL GAS:SYSTEM: LP GAS: NATURAL GAS: FPB-19RBSTFS-N

S. APPLICATION. THESE ARE NOT FIELD

FIREGEAR OUTDOORS 9230 CONSERVATION WAY FPB-19RBSTFS-P FPB-25RBSTFS-PFORT WAYNE, IN 46809 FPB-25RBSTFS-P FPB-29RBSTFS-P TOLL FREE: 1-888-672-8929 FPB-29RBSTFS-P FPB-33RBSTFS-P FAX: (888) 672-8024 FPB-33RBSTFS-Pwww.firegearoutdoors.com

LP FPB-19RBSTFS-P GAS:

FPB-19RBSTFS-N FPB-25RBSTFS-N FPB-25RBSTFS-N FPB-29RBSTFS-N

ROUND TFS SYSTEMS FPB-29RBSTFS-N FPB-33RBSTFS-N FPB-33RBSTFS-N

A C

N PROFESSIONALS FOR PLANNING PURPOSES

ELECT DESIRED SYSTEM:

AND APPROVED BY THE PRODUCT

NATURAL GAS:

LP GAS:

FPB-19RBSTFS-N

FPB-19RBSTFS-P THESE FIRE PITS FPB-25RBSTFS-N DISCLAIMER: FPB-25RBSTFS-P ARE TESTED TO ARE BASED ON 7.0" WC FOR NATURAL BTU LISTINGS ANSI Z21.97-2014 / LIQUID PROPANE (LP) AT THE BURNER GAS (NG) AND 11.0" WC FOR FPB-29RBSTFS-N DISCLAIMER: FPB-29RBSTFS-P BTU LISTINGS ARE BASED ON 7.0" WC FOR NATURAL ORIFICE.CSA FLEX2.41-2014 LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO GAS (NG) AND 11.0" WC FOR LIQUID PROPANE (LP) AT THE BURNER BTU'S. AS A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM FPB-33RBSTFS-N AFFECTFPB-33RBSTFS-P STANDARDS. ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO

TOP VIEW A TOP VIEW B AC B C

H H

G

D D

G E

F

E

F

THE LISTED BTU SPECIFICATIONS. AFFECT BTU'S. AS06/09/2016 A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM REVISION DATE THE LISTED BTU SPECIFICATIONS.

FRONT VIEW CLEARANCE TO COMBUSTIBLES H OVERALL CLEARANCE TO A CLEARANCE A CLEARANCE TO CLEARANCE TOTO COMBUSTIBLES FRONT VIEW TOP- MAX VIEW CADdetails.com MIN INSIDE PAN OUTSIDE DIM. APPLIANCE COMBUSTIBLE FLOOR COMBUSTIBLE A COMBUSTIBLE A OVERALL CLEARANCE TO A CLEARANCE TO A CLEARANCE TO MODEL DIM. DEPTH (INCLUDING LIP) CUT DIM. PAN MINOUT - MAX INSIDE OUTSIDE DIM. PAN SIDEWALL HEIGHT FROM THE LIP OF THE PAN CEILING B APPLIANCE COMBUSTIBLE FLOOR COMBUSTIBLE A COMBUSTIBLE D A B C MODEL (INCLUDING LIP) CUT OUT E G H C DIM. PAN DIM. DEPTH SIDEWALL HEIGHT FROM THE LIPF OF THE PAN CEILING 18" TO A 22" 19" 54" 16" FPB-19RBSTFS-N 19 1/4"B- 21 1/2" 12 3/4"G A C D 2 D3/4" OUTSIDE CLEARANCE CLEARANCE CLEARANCE F G H 18" 16" FPB-19RBSTFS-P 22" 19 1/4" - 21 1/2" 19" 2 3/4" OVERALL 12E3/4" 54" DIM. COMBUSTABLE TO A 16" TO A54" 22" 19" 18" FPB-19RBSTFS-N 19 223/4" 12 FPB-25RBSTFS-N 123/4" 3/4" 19" 28" 251/4" 1/4"--21 271/2" 1/2" 25" 3/4" 18" 69" LISTINGS ARE BASED ONFPB-19RBSTFS-P 7.0" WC FOR NATURAL 18" 16" 22" 1/4" 1/2" 19" 22E3/4" 12 54" (INCLUDING MIN CUT FLOOR FROM COMBUSTABLE FPB-25RBSTFS-P 28" - MAX19 25 1/4"--21 27INSIDE 1/2" 25" PAN 3/4" APPLIANCE 123/4" 3/4" 18" THE COMBUSTABLE 19" 69" " WC FOR LIQUID PROPANE (LP) AT THE BURNER F 28" 25 1/4" 27 1/2" 25" 2 3/4" 18" 69" FPB-25RBSTFS-N 12 3/4" 19" 18" 19" 69" FPB-29RBSTFS-N 30" - 31PAN 3/8" DIM. 29" DEPTH 12 3/4" 32 1/4" 2 3/4" LIP) OUT DIM. HEIGHT LIP OF PAN SIDEWALL CEILING FPB-25RBSTFS-P 2530" 1/4"- -31273/8" 1/2" 25" 2 3/4" 12 18" 19" 69" E SIZE AND PROPER GAS PIPE SIZING WILL ALSO 3228" FPB-29RBSTFS-P 1/4" 123/4" 29" 3/4" 18" 19" 69" A FROM32 B 30" C D2223/4" E3/4" F 18" G 19" H 69" 29" FPB-29RBSTFS-N 12 A RESULT YOURMODEL BTU'S MAY VARY SLIGHTLY FPB-33RBSTFS-N 123/4" 3/4" 361/4" 1/4" 34"--31 353/8" 1/4" 33" 3/4" 18" 19" 69" 29" 2 3/4" 18" 19" 69" FPB-29RBSTFS-P 32 1/4" 30" 31 3/8" 12 3/4" PECIFICATIONS. FRONT CLEARANCE TO COMBUSTIBLES FPB-33RBSTFS-P 36 1/4" 34" - 35 VIEW 1/4" 12 3/4" 33" 2 3/4" 18" 19" 69" 3619 1/4"1/4" - 21 1/2" 34" - 35 1/4"19" 33" 2 3/4" 2 3/4" FPB-33RBSTFS-N 12 3/4" FPB-19RBSTFS-N 22” 12 3/4" 18"18" 16" 19" 54"69" BTU OUTPUT MODEL BTU BTU OUTPUT OVERALL CLEARANCE TO A CLEARANCE TO A CLEARANCE TO 33" 2 3/4" 18" FPB-33RBSTFS-P 34" -ORFICE 35 1/4" 12 3/4" PRESSURE GAS TYPE NG19" GAS TYPE LP 69" MIN - MAX INSIDE36 1/4" PAN FACTORY OUTSIDE DIM. LOW SPECIFICATIONS ONOUTPUT HIGH FLOOR COMBUSTIBLE COMBUSTIBLE A COMBUSTIBLE MODEL BTUDEPTH APPLIANCE BTU BTUONOUTPUT PAN DIM. (INCLUDING LIP) CUT OUT DIM. FPB-19RBSTFS-N 45,000 MIN. WC 10.5" WCLP54" #19ORFICEFROM 80,000 TYPE TYPE FACTORY SIDEWALL PRESSURE HEIGHT LIP CEILINGGAS5.0" FPB-19RBSTFS-P 22" C 19 D1/4" - 21 1/2" 19" THE 2 OF 3/4"THE PAN 12 3/4" 18" INLET 16"NG GAS SPECIFICATIONS ON HIGH ON LOW A B 47,400 MAX. INLETH 10.5" WC 13.0" WC #36 79,000 FPB-19RBSTFS-P E F G MIN. INLET 5.0" WC 10.5" WC #19 80,000 FPB-19RBSTFS-N 45,000 51,000 NORMAL INLET 105,000 FPB-25RBSTFS-N 7.0" WC 11.0" WC #7 18" 16" 22" 19" N 19 1/4" - 21 1/2" 2 3/4" 12#36 3/4" MAX. INLET54" 10.5" WC 13.0" WC 79,000 47,400 FPB-19RBSTFS-P 49,500 #31 100,000 FPB-25RBSTFS-P 18" 16" 22" 19 1/4" - 21 1/2" 19" 2 3/4" 12 3/4" 54" P FPB-25RBSTFS-N 28" 25 1/4" 27 1/2" 25" 2 3/4" 12 3/4" 18" 19" NORMAL INLET 105,000 51,000 #7 7.0" WC 11.0" WC 69" FPB-25RBSTFS-N 51,000 #7 105,000 FPB-29RBSTFS-N 12#31 3/4" 19" N 28" 25 1/4" - 27 1/2" 25" 2 3/4" 18" 69" 100,000 49,500 FPB-25RBSTFS-P 49,500 #31 100,000 FPB-29RBSTFS-P 28" 25 1/4" - 27 1/2" 25" 2 3/4" 12#7 3/4" 18" 19" 69" P 105,000 51,000 FPB-29RBSTFS-N 51,000 105,000 #7 FPB-33RBSTFS-N 18" 69" N 30" - 31 3/8"FPB-29RBSTFS-P 3/4" 32 1/4" 2 3/4" FPB-25RBSTFS-P 28" 29" 25 1/4" - 27121/2" 25" 100,000 2 3/4" 12 3/4" 19" 18" 19" 69" #31 49,500 49,500 100,000 #31 FPB-33RBSTFS-P P 32 1/4" 30" - 31 3/8"FPB-33RBSTFS-N 12#7 3/4" 29" 2 3/4" 18" 19" 69" 105,000 51,000 N 12#31 3/4" 36 1/4" 34" - 35 1/4"NOTES: 33" 2 3/4" 18" 19" 69" 100,000 49,500 FPB-33RBSTFS-P 1. ALL FIRE PROVIDE ACCESS TO THE VALVE SYSTEMS AS19" WELL AS GAS CONNECTIONS. P 36 1/4" 34" - 35 1/4"NOTES: 12 SHOULD 3/4" 33" PIT INSTALLATIONS 230" 3/4" - 31 3/8" 18" 69" FPB-29RBSTFS-N 32 1/4" 29" 2 3/4" 12 3/4" 18" 19" 69" 2. THESE FIRE PITS ARE SOLD AS NATURAL OR LP GAS MODELS. YOU MUST ORDER THE SPECIFIC MODEL PER THE APPLICATION. THESE ARE NOT FIELD 1. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. BTU OUTPUT MODEL BTU BTU OUTPUT CONVERTIBLE. PRESSURE GASORDER TYPE THE NG GAS TYPE FACTORY ORFICE2. THESE FIRE PITS ARE SOLD AS NATURAL OR LP GAS MODELS. YOU MUST MODELLP PER THE APPLICATION. THESE ARE NOT FIELD LOW INCHES OF CROSS ECIFICATIONS 3. ALLON FIREHIGH PITS REQUIRE ON 18-SQUARE FLOW VENTILATION PER SIDE SPECIFIC OF ENCLOSURE. FPB-29RBSTFS-P 32CONVERTIBLE. 1/4"80,000 30" 3145,000 3/8" 29" CODES 2 3/4" 12 3/4" 19" 69" -19RBSTFS-N MIN.WHEN INLET WC 10.5" 18" WC #19 4.

ALWAYS ADHERE TO -YOUR STATE AND LOCAL INSTALLING5.0" FIRE PITS .

3.5. ALL FIRE PITS REQUIRE 18-SQUARE VENTILATION PERWC SIDE OF ENCLOSURE. DRAWINGS NOT TO SCALE. 47,400 INCHES OF CROSS MAX.FLOW INLET 10.5" 13.0" WC #36 79,000 -19RBSTFS-P 4.6. ALWAYS ADHEREISTO YOUR STATE AND BY LOCAL CODES WHEN INSTALLING FIRE PITS . CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES THIS105,000 DRAWING INTENDED FOR USE ARCHITECTS, ENGINEERS, CONTRACTORS, 51,000 NORMAL INLET -25RBSTFS-N 7.0" WC 11.0" WC #7 5.36DRAWINGS TO SCALE. FPB-33RBSTFS-N 1/4" 34" - MAY 3549,500 1/4" 33"CONSTRUCTION. 2 3/4" 12 3/4" 18" 19" 69" ONLY. THISNOT DRAWING NOT BE USED FOR #31 100,000 -25RBSTFS-P 6.7. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS DESIGNAND PROFESSIONALS ALL 105,000 INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BEAND REVIEWED APPROVED BYFOR THEPLANNING PRODUCTPURPOSES 51,000 #7 -29RBSTFS-N ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. MANUFACTURER TO BE CONSIDERED ACCURATE. 49,500 #31 100,000 -29RBSTFS-P 7.8. ALL INFORMATIONNOTE: CONTAINED HEREIN AND WASCOMPANY CURRENT INFORMATION AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED

BY THE PRODUCT CONTRACTOR'S FOR PRODUCT VISIT AND ENTER AND APPROVED FPB-33RBSTFS-P 36 1/4" 34" 35 1/4" 33" 2 3/4” 12www.CADdetails.com/info 3/4" 18" 19" 69" 51,000 105,000 TO BE CONSIDERED #7 -33RBSTFS-N MANUFACTURER ACCURATE. REFERENCE NUMBER 5053-009.

49,500 100,000 NOTE: FOR #31 -33RBSTFS-P THESE FIRE PITS 8. CONTRACTOR'S PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER ES: REFERENCE NUMBER 5053-009.

ARE TESTED TO THESE FIRE PITS LL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. ANSI Z21.97-2014 ARE TESTED TO / HESE FIRE PITS ARE SOLD AS NATURAL OR LP GAS MODELS. YOU MUST ORDER THE SPECIFIC MODEL PER THE APPLICATION. THESE ARE NOT FIELD CSA 2.41-2014 / ONVERTIBLE. ANSI Z21.97-2014 ROUND STAINLESS STEEL TFS BURNER SYSTEMS STANDARDS. BTU OUTPUT BTU OUTPUT LL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. CSA 2.41-2014 MODEL FACTORY ORIFICE PRESSURE GAS TYPE NG GAS TYPE LP LWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE . STEEL TFS BURNER ROUND STAINLESS ONPITS HIGH ON LOWSYSTEMS 5053-009 REVISION DATE 06/09/2016 STANDARDS.

ROUND BURNER SYSTEMS GAS PRESSURE ROUND BURNER SYSTEMS

BTU SPECS

RAWINGS NOT TO SCALE. HIS DRAWING IS INTENDED FOR USE BYBY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES PROTECTED COPYRIGHT ©2016 CADDETAILS.COM LTD. 5053-009 FPB-19RBSTFS-N #19 80,000 45,000 MIN. INLET NLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD.MUST BE REVIEWED AND APPROVED BY THE PRODUCT LL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT FPB-19RBSTFS-P #36 79,000 47,400 MAX. INLET ANUFACTURER TO BE CONSIDERED ACCURATE. FPB-25RBSTFS-N #7INFORMATION VISIT www.CADdetails.com/info 105,000 51,000 NORMAL INLET ONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY AND ENTER EFERENCE NUMBER 5053-009.

FPB-25RBSTFS-P

#31

100,000

49,500

FPB-29RBSTFS-N

#7

105,000

51,000

FPB-29RBSTFS-P #31 100,000 ROUND STAINLESS STEEL TFS BURNER SYSTEMS FPB-33RBSTFS-N #7 105,000

49,500

ROUND BURNER SYSTEMS

FPB-33RBSTFS-P PYRIGHT ©2016 CADDETAILS.COM LTD.

18

#31

100,000

51,000 49,500

5.0" WC 10.5" WC 7.0" WC

THESE FIRE PITS

CADdetails.com REVISION DATE 06/09/2016 10.5" WC CADdetails.com 13.0" WC 11.0" WC

ARE LISTINGS TESTED TO ARE BASED ON 7.0” WC FOR DISCLAIMER: BTU ANSI Z21.97-2014 / WC FOR LIQUID PROPANE NATURAL GAS (NG) AND 11.0” CSA 2.41-2014 (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND STANDARDS. PROPER GAS PIPE SIZING WILL ALSO AFFECT BTU’S. AS A RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE REVISION DATE 06/09/2016 LISTED BTU SPECIFICATIONS. CADdetails.com

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

10.5" WC 7.0" WC

13.0" WC 11.0" WC

A C

SELECT DESIRED SYSTEM:

FIREGEAR OUTDOORS A WAY 9230 CONSERVATION C FPB-19RBSTMS-N SELECT DESIRED SYSTEM: FPB-19RBSTMS-PFORT WAYNE, IN 46809 FPB-25RBSTMS-N NATURAL GAS: LP FPB-25RBSTMS-P GAS: TOLL FREE: 1-888-672-8929 FPB-29RBSTMS-N FPB-29RBSTMS-P FAX: (888) 672-8024 FPB-16RBSMT-N FPB-16RBSMT-P FPB-33RBSTMS-N FPB-33RBSTMS-Pwww.firegearoutdoors.com FPB-19RBSMT-N FPB-19RBSMT-P

ROUND TMS SYSTEMS NATURAL GAS:

NS. E APPLICATION. THESE ARE NOT FIELD

N PROFESSIONALS FOR PLANNING PURPOSES

SELECT DESIRED SYSTEM:

D AND APPROVED BY THE PRODUCT

NATURAL GAS:

LP GAS:

FPB-25RBSMT-N FPB-29RBSMT-N

LP GAS:

A FPB-25RBSMT-P C FPB-29RBSMT-P

TOP VIEW A B C TOP VIEW A B H C FRONT VIEW

FPB-33RBSMT-N FPB-33RBSMT-P FPB-19RBSTMS-N FPB-19RBSTMS-P THESEBTU FIRELISTINGS PITS ARE BASED ON 7.0" WC FOR NATURAL FPB-25RBSTMS-N DISCLAIMER: FPB-25RBSTMS-P ARE TESTED GAS (NG) AND 11.0" WCTO FOR LIQUID PROPANE (LP) AT THE BURNER ANSI Z21.97-2014 FPB-29RBSTMS-N ORIFICE. FPB-29RBSTMS-P FLEX LINE SIZE/AND GAS7.0" PIPE SIZING WILL ALSO DISCLAIMER: BTU LISTINGS AREPROPER BASED ON WC FOR NATURAL CSA 2.41-2014 AFFECT BTU'S. AS AWC RESULT YOURPROPANE BTU'S MAY(LP) VARY FROM (NG) AND 11.0" FOR LIQUID AT SLIGHTLY THE BURNER FPB-33RBSTMS-NGAS FPB-33RBSTMS-P STANDARDS. THE LISTED BTU SPECIFICATIONS. ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO

FORT WAYNE, IN 46809 www.firegearoutdoors.com TOLL FREE: 1-888-672-8929 FAX: (888) 672-8024 www.firegearoutdoors.com

H H G

D

E

G

F

CLEARANCE TO COMBUSTIBLESF E AFFECT BTU'S. AS06/09/2016 A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM REVISION DATE CLEARANCE TO A CLEARANCE TO OVERALL CLEARANCE TO A OUTSIDE DIM. MIN - MAX INSIDE PAN THE LISTED BTU SPECIFICATIONS. FRONT VIEWCOMBUSTIBLE FLOOR CLEARANCE TO COMBUSTIBLES APPLIANCE COMBUSTIBLE A COMBUSTIBLE TOP VIEW CADdetails.com MODEL (INCLUDING LIP) CUT OUT DIM. PAN DIM. DEPTH G HEIGHT FROM THE LIP OFTO THE PAN CLEARANCE SIDEWALL CEILING TO A TO A CLEARANCE OVERALL CLEARANCE A C D A DIM. OUTSIDE MIN - BMAX INSIDE PAN B E F FLOOR G H APPLIANCE COMBUSTIBLE COMBUSTIBLE A COMBUSTIBLE MODEL DIM. DEPTH (INCLUDING OUT 14" FPB-19RBSTMS-N 22" LIP) CUT 19 1/4" -C21DIM. 1/2" PAN19" 2 3/4" 6 5/8" 57" SIDEWALL HEIGHT FROM THE 15 LIP1/2" OF THE PAN CEILING CLEARANCE CLEARANCE CLEARANCE C D 2 D3/4" A 22" 19" 15F1/2"TO AF 14" 57" 19 1/4"B- 21 1/2" 6 E5/8" U LISTINGS ARE BASED ONFPB-19RBSTMS-P 7.0" WC FOROUTSIDE NATURAL G H 25" 54" 251/2" 1/4"--17 271/4" 1/2" 3/4" FPB-25RBSTMS-N 5/8" 16" DIM. 18 28" OVERALL COMBUSTABLE TO A14" TO57" A 0" WC FOR LIQUID PROPANE (LP) AT THE BURNER 16" FPB-16RBSMT-N 1/2" 16 22E1/2" 663/8" 15 18" 1/2" 251/2" 1/4"--17 271/4" 1/2" 25" 5/8" 3/4" 18" 54" 16" NE SIZE AND PROPER GASFPB-25RBSTMS-P PIPE SIZING WILL ALSO 18 28" 16" 14" 57" FPB-16RBSMT-P 1/2" 16 221/2" 663/8" 15 1/2" THE COMBUSTABLE (INCLUDING MIN MAX CUT INSIDE PAN APPLIANCE FLOOR FROM COMBUSTABLE 65/8" 5/8" 1/4" 29" 3/4" 18" 19" 69" FPB-29RBSTMS-N 30" 3/8" S A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM 3222" 16" 54" FPB-19RBSMT-N 19 FRONT 1/4"- -3121VIEW 1/2" 223/4" 6CLEARANCE TO COMBUSTIBLES LIP) PAN DIM.19" HEIGHT LIP OF18" PAN SIDEWALL CEILING 5/8" 29" DEPTH 3/4" 18" 19" 69" 3222" 1/4"OUT DIM. FPB-29RBSTMS-P SPECIFICATIONS. FPB-19RBSMT-P 19 30" 1/4"- -31213/8" 1/2" 19" 223/4" 665/8" 18" 16" 54" 33" 18" 19" 69" 5/8" 3628" 1/4" 3/4" MODELFPB-33RBSTMS-N B 2534" E F18" G 19" H69" FPB-25RBSMT-NA 1/4"- -35271/4" 1/2" C 25" 22D3/4" 665/8" 6CLEARANCE 5/8" 33" 23/4" 3/4"A 18" 19" 69" FPB-33RBSTMS-P 3628" 1/4" 34" - -35271/4" TO A CLEARANCE OVERALL CLEARANCE TO TO 25" 18" 19" 69" FPB-25RBSMT-P 25 1/4" 1/2" 2 6 5/8" OUTSIDE DIM. MIN - MAX INSIDE PAN APPLIANCE COMBUSTIBLE FLOOR 665/8" COMBUSTIBLE A1/2” COMBUSTIBLE 29" 18" 19" 69" FPB-29RBSMT-N 32 1/4" 30" 31 3/8" 2 3/4" FPB-19RBSTMS-N 22” 19 1/4" 21 1/2" 19" 2 3/4" 5/8” 15 14” 57" (INCLUDING LIP) CUT OUT DIM. PAN DIM. DEPTH HEIGHT FROM THE THE PAN 6 5/8"SIDEWALL FPB-29RBSMT-P 32 1/4" 30" - 31 3/8" 29" LIP OF 2 3/4" 18" CEILING 19" 69" MODEL CONVERSION B C BTU D A FPB-33RBSMT-N 36 1/4" FACTORY 34" 35 1/4" BTU33" 6 5/8" 18" H GAS TYPE NG19" GAS TYPE LP 69" OUTPUT PRESSURE E -ORFICE F 2 3/4" G SPECIFICATIONS KIT PART NO. FPB-33RBSMT-P - 35 1/4" 19" 33"15 1/2" 2 3/4" 665/8" 18" 57" 69" S-N 22" 19 1/4" - 21 1/2" 22"19" 36 1/4" 219 3/4" 634" 5/8" FPB-19RBSTMS-P 1/4" - 21 1/2" 5/8” 14" 15 1/2” 14”19" MIN. INLET FPB-19RBSTMS-N #29 65,5002 3/4" LPK#41 5.0" WC 10.5" WC 57" 22" 19" BTU 2 3/4" 15 1/2" 14" 57" S-P 19 1/4" - 21 1/2" MODEL 6 5/8" FPB-19RBSTMS-P FACTORY #41 65,000 MAX. INLET 10.5" WC 13.0" WC PRESSURE CONVERSION16" 28" 25" 18" 54" GAS TYPE NG GAS TYPE LP 25 1/4" - 27 1/2" 2 3/4" S-N 6 5/8"ORFICE BTU OUTPUT SPECIFICATIONS LPK#41 #29 65,500 NORMAL INLET 7.0" WC 11.0" WC FPB-25RBSTMS-N 2 3/4" 18" 54" 16" S-P 28" 25 1/4" - 27 1/2" 25" 6 5/8" FPB-25RBSTMS-N 28" 25 1/4" 27 1/2" 25" 2 3/4" 6 5/8” 18" 16” FPB-16RBSMT-N #35 45,000 LPK#47 MIN. INLET 5.0" WC 10.5" WC 54” 65,000 #41 FPB-25RBSTMS-P 32 1/4" 29" 2 3/4" 18" 19" 69" S-N 30" - 31 3/8"FPB-16RBSMT-P 6#47 5/8" MAX. INLET 10.5" WC 13.0" WC 45,500 LPK#41 #29 65,500 FPB-29RBSTMS-N 29" 2 3/4" 18" 69" 32 1/4" 30" - 31 3/8"FPB-19RBSMT-N 6#29 5/8" S-P NORMAL INLET 7.0" WC 11.0" WC 65,000 LPK#41 19" #41 65,000 FPB-29RBSTMS-P 18" 36FPB-25RBSTMS-P 1/4" 34" - 35 1/4"FPB-19RBSMT-P 225 3/4" S-N 6 #41 5/8" 28"33" 1/4" - 27 1/2" 25" 65,000 6 5/8” 19" 18" 69" 16” 54” LPK#41 #29 65,5002 3/4" FPB-33RBSTMS-N 33" 2 3/4" 18" 69" S-P 36 1/4" 34" - 35 1/4"FPB-25RBSMT-N 6#29 5/8" LPK#41 19" 65,000 65,000 #41 FPB-33RBSTMS-P FPB-25RBSMT-P #41 65,000 FPB-29RBSTMS-N 32 1/4" 30" - 31 3/8" 29" 65,000 2 3/4" 6 5/8” 18" 19" 69" FPB-29RBSMT-N #29 LPK#41 NOTES: MODEL BTU CONVERSION 65,000 TO THE VALVE FACTORY ORFICE1.FPB-29RBSMT-P BTUFIRE OUTPUT PRESSURE GASSYSTEMS TYPE NG GAS TYPE LP ALL PIT INSTALLATIONS#41 SHOULD PROVIDE ACCESS AS WELL AS GAS CONNECTIONS. ECIFICATIONS KIT PART NO. FPB-33RBSMT-N #29 65,000 2.

THESE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE LPK#41 CONVERTED TO LP GAS. MIN. INLET #29 65,500 LPK#41 5.0" 5/8” WC 10.5" WC B-19RBSTMS-N FPB-29RBSTMS-P 32 30" - 31 3/8" 2 3/4" 18" 19" 69" FPB-33RBSMT-P #41 INCHES29" 65,000 3.

ALL1/4" FIRE PITS REQUIRE 18-SQUARE OF CROSS FLOW VENTILATION6PER SIDE OF ENCLOSURE. #41 65,000 MAX. INLET 10.5" WC 13.0" WC B-19RBSTMS-P NOTES: 4. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS . #29 65,500 NORMAL INLET 7.0" WC 11.0" WC LPK#41 B-25RBSTMS-N 1.5. ALL FIRE PITNOT INSTALLATIONS DRAWINGS TO SCALE. SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. 65,000 #41 B-25RBSTMS-P 2.6. 36 THESE FIRE PITIS MODELS ARE SHIPPED NATURAL GAS AND MUST BE CONVERTED LP GAS. THIS DRAWING INTENDED FOR USE BYASARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FPB-33RBSTMS-N 1/4" 34" - 35 1/4" 33" 2 3/4" 6 5/8” TO 18" 19" FOR PLANNING PURPOSES 69" #29 65,500 LPK#41 B-29RBSTMS-N 3. ALL FIRE PITS REQUIREMAY 18-SQUARE INCHES OFCONSTRUCTION. CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. ONLY. THIS DRAWING NOT BE USED FOR #41 65,000 B-29RBSTMS-P 4.7. ALWAYS ADHERE TOCONTAINED YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS .

ALL INFORMATION HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT #29 65,500NOT TO LPK#41 B-33RBSTMS-N 5. 36 DRAWINGS MANUFACTURER TOSCALE. BE CONSIDERED ACCURATE. FPB-33RBSTMS-P 1/4" 34" - 35 1/4" 33" 2 3/4” 6 5/8” 18" 19" 69" 65,000 #41 B-33RBSTMS-P 6.8. THIS DRAWING ISNOTE: INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTSAND AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES CONTRACTOR'S FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info ENTER D

ONLY. THIS DRAWING NOT BE USED FOR CONSTRUCTION. REFERENCE NUMBERMAY 5053-013.

7. ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT THESE FIRE PITS ES: ARE TESTED TO MANUFACTURER TO VALVE BE CONSIDERED ACCURATE. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE SYSTEMS AS WELL AS GAS CONNECTIONS. 8. NATURAL CONTRACTOR'S PRODUCT AND COMPANY ANSI Z21.97-2014 / THESE FIRE PIT MODELS ARE SHIPPED AS GAS ANDNOTE: MUSTFOR BE CONVERTED TO LP GAS. INFORMATION VISIT www.CADdetails.com/info AND ENTER REFERENCE NUMBER 5053-017.PER SIDE OF ENCLOSURE. ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION CSA 2.41-2014 CONVERSION FIRE ROUND STAINLESS FACTORY ORIFICE BTU PRESSURE GAS TYPE NG GASTHESE TYPE LP PITS ALWAYS ADHERE TOMODEL YOUR STATE AND LOCAL CODES WHEN INSTALLING FIREOUTPUT PITS . STEEL TMS BURNER SYSTEMS STANDARDS. KIT PART N0.

ARE TESTED TO DRAWINGS NOT TO SCALE. ANSIDATE Z21.97-2014 / 5053-013 REVISION 06/09/2016 THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES FPB-19RBSTMS-N #29 65,500 LPK#41 MIN. INLET 5.0" WC 10.5" WC ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. CSA 2.41-2014 PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD.MT BURNER SYSTEMS CADdetails.com STEEL ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THEROUND TIME OFSTAINLESS DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT STANDARDS. FPB-19RBSTMS-P 65,000 MAX. INLET 10.5" WC 13.0" WC MANUFACTURER TO BE CONSIDERED ACCURATE. #41 5053-017 REVISION CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER FPB-25RBSTMS-N #29 65,500 LPK#41 NORMAL INLET 7.0" WC 11.0"DATE WC 05/26/2016 REFERENCE NUMBER 5053-013.

BTU SPECS

ROUND BURNER SYSTEMS GAS PRESSURE

ROUND BURNER SYSTEMS

PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD. FPB-25RBSTMS-P #41 65,000 #29SYSTEMS 65,500 ROUND BURNER

FPB-29RBSTMS-N

FPB-29RBSTMS-P #41 65,000 ROUND STAINLESS STEEL TMS BURNER SYSTEMS FPB-33RBSTMS-N #29 65,500

FPB-33RBSTMS-P OPYRIGHT ©2016 CADDETAILS.COM LTD.

#41

-

LPK#41 LPK#41

65,000

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

-

CADdetails.com THESE FIRE PITS ARE TESTED TO DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0” WC FOR ANSI Z21.97-2014 / NATURAL GAS (NG) AND 11.0” WC FOR LIQUID PROPANE CSA 2.41-2014 (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND STANDARDS. PROPER GAS PIPE SIZING WILL ALSO AFFECT BTU’S. AS REVISION DATE 06/09/2016 A RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE LISTED BTU SPECIFICATIONS. CADdetails.com

This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

19

FIREGEAR OUTDOORS A WAY 9230 CONSERVATION C FPB-16RBSMT-N SELECT DESIRED SYSTEM: FPB-16RBSMT-P FORT WAYNE, IN 46809 S. FPB-19RBSMT-N NATURAL GAS: LP FPB-19RBSMT-P GAS: TOLL FREE: 1-888-672-8929 APPLICATION.ROUND THESE ARE NOT FIELD MT SYSTEMS FPB-25RBSMT-N FPB-25RBSMT-P FAX: (888) 672-8024 FPB-16RBSMT-N FPB-16RBSMT-P FPB-29RBSMT-N FPB-29RBSMT-P www.firegearoutdoors.com FPB-19RBSMT-N FPB-19RBSMT-P NATURAL GAS:

N PROFESSIONALS FOR PLANNING PURPOSES

ELECT DESIRED SYSTEM:

FPB-33RBSMT-N FPB-25RBSMT-N FPB-29RBSMT-N

LP GAS:

www.firegearoutdoors.com

H

A FPB-33RBSMT-P FPB-25RBSMT-P C FPB-29RBSMT-P

H

TOP VIEW AND APPROVED BY THE PRODUCT G LP GAS: NATURAL GAS: A FPB-33RBSMT-N FPB-33RBSMT-P B FPB-16RBSMT-N FPB-16RBSMT-P C DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0" WC FOR NATURAL TOP VIEW THESE FIRE PITS G AND 11.0" WC FOR LIQUID PROPANE (LP) AT THE BURNER FPB-19RBSMT-N GAS (NG) FPB-19RBSMT-P F D A ARE TESTED TO ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO E B ANSI Z21.97-2014 / FPB-25RBSMT-N AFFECT FPB-25RBSMT-P H BTU'S. ASLISTINGS A RESULTARE YOUR BTU'S SLIGHTLY FROM C DISCLAIMER: BTU BASED ONMAY 7.0"VARY WC FOR NATURAL CSABTU 2.41-2014 THE(NG) LISTED SPECIFICATIONS. AND 11.0" WC FOR LIQUID PROPANE (LP) AT THE BURNER FPB-29RBSMT-N GAS FPB-29RBSMT-P CLEARANCE TO COMBUSTIBLESF FRONT VIEW D STANDARDS. ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO E TO A CLEARANCE TO A CLEARANCE TO OVERALL CLEARANCE FPB-33RBSMT-N AFFECT FPB-33RBSMT-P OUTSIDE - MAX PAN BTU'S. AS06/09/2016 A RESULT YOURDIM. BTU'S MAYMIN VARY SLIGHTLYINSIDE FROM REVISION DATE APPLIANCE COMBUSTIBLE FLOOR COMBUSTIBLE A COMBUSTIBLE MODEL THE LISTED BTU SPECIFICATIONS. (INCLUDING LIP) CUT OUT DIM. PAN DIM. DEPTH FRONT VIEW TO COMBUSTIBLES TOP VIEW CADdetails.com SIDEWALL HEIGHT FROM THE LIP OF THE PANCLEARANCE CEILING G BA C D A CLEARANCE E F TO A G TO A CLEARANCE H OVERALL CLEARANCE TO PAN B17 1/4" INSIDE 16" 14" 57" FPB-16RBSMT-N OUTSIDE 18 1/2"DIM. 16MIN 1/2"- -MAX 2 1/2" APPLIANCE 6 3/8" 15 1/2" FLOOR COMBUSTIBLE COMBUSTIBLE A COMBUSTIBLE MODEL DIM. DEPTH CLEARANCE TO A CLEARANCE CLEARANCE (INCLUDING OUT LISTINGS ARE BASED ON FPB-16RBSMT-P 7.0" WC FOROUTSIDE NATURAL 14" 57" 18 1/2" LIP) CUT 16 1/2" -C17DIM. 1/4" PAN16" 2 1/2" 6 3/8" SIDEWALL HEIGHT FROM THE 15 LIP1/2" OF THE PAN CEILING C D 2 D3/4" " WC FOR LIQUID PROPANE (LP) AT THE BURNER A 22" 19" 18" FPB-19RBSMT-N 19 1/4"B- 21 1/2" 6 E5/8" F DIM. OVERALL COMBUSTABLE TO A16" TO 54" F G HA E SIZE AND PROPER GASFPB-19RBSMT-P PIPE SIZING WILL ALSO 191/2" 1/4"--17 211/4" 1/2" 19" 3/4" 5/8" 18" 16" 54" 16" 14" 57" FPB-16RBSMT-N 18 22" 1/2" 16 22E1/2" 663/8" 15 1/2" THE COMBUSTABLE (INCLUDING MIN MAX CUT INSIDE PAN APPLIANCE FLOOR FROM COMBUSTABLE A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM 28" FPB-25RBSMT-N 251/2" 1/4"--17 271/4" 1/2" 25" 3/4" 63/8" 5/8" 18" 19" 69" 16" 14" 57" FPB-16RBSMT-P 1/2" 16 221/2" 6HEIGHT 1/2" LIP) 1822" PAN LIP 15 OF18" PAN SIDEWALL CEILING 28" OUT DIM. 25" DEPTH 18" 19" 69" FPB-25RBSMT-P 25FRONT 1/4"--21 27 1/2" DIM. 3/4" 65/8" 5/8" PECIFICATIONS. 19" 16" 54" TO COMBUSTIBLES VIEW FPB-19RBSMT-N 19 1/4" 1/2" 223/4" 6CLEARANCE 29" 18" 19" 69" FPB-29RBSMT-NA 3222" 1/4" 3/4" 5/8" MODELFPB-19RBSMT-P BOVERALL E F18" G 16" H54" 19 30" 1/4"- -31213/8" 1/2" CCLEARANCE 19" 22D3/4" 66CLEARANCE 5/8" TO A CLEARANCE TO TO FPB-29RBSMT-P 1/4" 30" - -31273/8" 29" 23/4" 3/4"A 65/8" 5/8" 18" 19" 69" OUTSIDE DIM. MIN - MAX INSIDE 3228" PAN FPB-25RBSMT-N 25 1/4" 1/2" 25" 2 6 18" 19" 69" COMBUSTIBLE FLOOR COMBUSTIBLE A 18" COMBUSTIBLE FPB-33RBSMT-N 1/4"1/2" APPLIANCE 33" 2221/2" 3/4" 5/8" 19" 69" FPB-16RBSMT-N 1/2"DIM.3628" 16 - 17 1/4" 3/8" 15 18" 1/2" 14" 19" 57" 69" FPB-25RBSMT-P 2534" 1/4"- -35271/4" 1/2"16" 25" 3/4" 6665/8" DEPTH (INCLUDING LIP) CUT OUT DIM.18PAN SIDEWALL HEIGHT FROM THE LIP OF THE PAN FPB-33RBSMT-P 36 1/4" 34" 35 1/4" 33" 2 3/4" 6 5/8" 18" 19" 69" 29" 18" CEILING 19" 69" FPB-29RBSMT-N 30" - 31 3/8" 2 3/4" 6 5/8" B C 32 1/4" D A E - 31 3/8" G MODEL BTU FPB-29RBSMT-P 32 1/4" 30" 29" F 2 3/4" 6 5/8" 18" H 19" 69" FACTORY ORFICE BTU OUTPUT CONVERSION PRESSURE NG GAS TYPE LP57" 16" 36 21/4" N 18FPB-16RBSMT-P 1/2" 16 1/2" - 17 1/4" 1/2" 634" 3/8" 18 1/2" 16 1/2" - 17 1/4" 221/2" 3/8" 14" 15 18" 1/2" 57" GAS TYPE 14" FPB-33RBSMT-N - 35 1/4" 16" 33"15 1/2" 3/4" 6 65/8" 19" 69" SPECIFICATIONS 16" 36 21/4" 14" P 18 1/2" 16 1/2" - 17 1/4"FPB-16RBSMT-N 1/2" 634" 3/8"- 35 1/4" 15 1/2"2 3/4" FPB-33RBSMT-P 33" 6 5/8" 69" #35 45,000 LPK#47 MIN.18" INLET57" 5.0" WC 19" 10.5" WC 22" 19" 18" 16" 54" N 19 1/4" - 21 1/2"FPB-16RBSMT-P 2 3/4" 6 #47 5/8" 45,500 MAX. INLET 10.5" WC 13.0" WC MODEL FPB-19RBSMT-N 22"19" BTU 219 1/4" - 21 1/2" 6 5/8" 16" 18" INLET 16" P 22" 3/4" 6 #29 5/8" 18"2 3/4" CONVERSION 54" GAS7.0" 19 1/4" - 21 1/2"FPB-19RBSMT-N PRESSURE TYPE NG GAS TYPE FACTORY ORFICE 19" BTU65,000 OUTPUT LPK#41 NORMAL WC 11.0" WCLP 54" SPECIFICATIONS N 28" 25 1/4" - 27 1/2" 25" 2 3/4" 6 5/8" 18" 19" 69" 65,000 FPB-19RBSMT-P #41 FPB-16RBSMT-N 45,000 LPK#47 19" MIN. INLET69" 5.0" WC 10.5" WC 28" 25" 18" P 25 1/4" - 27 1/2" 2 3/4" 6#35 5/8" LPK#41 FPB-25RBSMT-N #29 65,000 MAX. INLET69" 10.5" WC 13.0" WC 54" #47 22"29" 19 1/4" - 21 1/2" 19" 45,500 2 3/4" 6 5/8" 19" 18" 16" 18" N 32FPB-19RBSMT-P 1/4" 30" - 31 3/8"FPB-16RBSMT-P 2 3/4" 6 5/8" FPB-25RBSMT-P #41 65,000 NORMAL INLET 7.0" WC 11.0" WC #29 65,000 LPK#41 19" P 32 1/4" 29" 2 3/4" 6 5/8" 18" 69" 30" - 31 3/8"FPB-19RBSMT-N FPB-29RBSMT-N #29 65,000 LPK#41 65,000 N 36 1/4" 34" - 35 1/4"FPB-19RBSMT-P 33" 2 3/4" 6 #41 5/8" 18" 19" 69" 65,000 FPB-29RBSMT-P #41 28"33" 1/4" - 27 1/2" 25" 65,000 6 5/8" 18" 69" 19" 69" LPK#41 P 36FPB-25RBSMT-N 1/4" 34" - 35 1/4"FPB-25RBSMT-N 225 3/4" 6#29 5/8" 18"2 3/4" FPB-33RBSMT-N #29 65,000 LPK#41 19" FPB-25RBSMT-P #41 65,000 FPB-33RBSMT-P #41 65,000 MODEL BTU FPB-29RBSMT-N #29 65,000 FACTORY ORFICE NOTES: BTU OUTPUT CONVERSION PRESSURE GASLPK#41 TYPE NG GAS TYPE LP FPB-25RBSMT-P 28" 25 1/4" - 27#41 1/2" 25" 65,000 2 3/4" 6 5/8" 18" 19" 69" ECIFICATIONS FPB-29RBSMT-P 1. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE5.0" SYSTEMS GASWC CONNECTIONS. B-16RBSMT-N #35 45,000 LPK#47 MIN. INLET WC AS WELL AS 10.5" FPB-33RBSMT-N #29 65,000 LPK#41 2. THESE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE10.5" CONVERTED B-16RBSMT-P #47 45,500 MAX. WC TO LP GAS. 13.0" WC FPB-33RBSMT-P #41 65,000INLETVENTILATION 3. 32 ALL1/4" FIRE PITS REQUIRE 18-SQUARE OF NORMAL CROSS FLOW SIDE OF ENCLOSURE. FPB-29RBSMT-N 30" - 31 3/8" INCHES29" 2INLET 3/4" 6PER 5/8" 18" 19" 69" B-19RBSMT-N #29 LPK#41 7.0" WC 11.0" WC NOTES: 65,000 4. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS .

65,000 B-19RBSMT-P #41 1. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. 5. DRAWINGS NOT TO SCALE. LPK#41 B-25RBSMT-N #29 65,000 2. THESE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE CONVERTED TO LP GAS. 6. 32 THIS DRAWING IS30" INTENDED FOR USE BY ARCHITECTS, ENGINEERS, AND DESIGN PROFESSIONALS FPB-29RBSMT-P 1/4" - 31 3/8" 29" 2 3/4" CONTRACTORS, 6 5/8" CONSULTANTS18" 19" FOR PLANNING PURPOSES 69" B-25RBSMT-P #41 65,000 3. ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. B-29RBSMT-N #29 65,000 LPK#41 4. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS .

7. ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT 65,000NOT TOTOSCALE. B-29RBSMT-P #41 5. DRAWINGS MANUFACTURER BE- 35 CONSIDERED ACCURATE. FPB-33RBSMT-N 36 1/4" 34" 1/4" 33" 2 3/4" 6 5/8" 18" 19" 69" 6. THIS DRAWING INTENDEDLPK#41 FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES B-33RBSMT-N #29 65,000 ISNOTE: 8. CONTRACTOR'S FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER ONLY.65,000 THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. B-33RBSMT-P #41 REFERENCE NUMBER 5053-017.

7. ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT THESE FIRE PITS ES: FPB-33RBSMT-P 36 1/4" 34"BE- CONSIDERED 35 1/4" ACCURATE. 33” 2 3/4" 6 5/8" 18" 19" 69" MANUFACTURER TO VALVE LL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE SYSTEMS AS WELL AS GAS CONNECTIONS. ARE TESTED TO 8.

CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER HESE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE CONVERTED TO LP GAS. ANSI Z21.97-2014 / REFERENCE NUMBER 5053-017.PER SIDE OF ENCLOSURE. LL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION CSA 2.41-2014 THESE FIRE PITS LWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS . STEEL MT BURNER SYSTEMS ROUND STAINLESS STANDARDS. ARE TESTED TO RAWINGS NOT TO SCALE. ANSIDATE Z21.97-2014 / HIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES CONVERSION 5053-017 REVISION FACTORY ORIFICE BTU OUTPUT PRESSURE GAS TYPE NG GAS CSA TYPE LP05/26/2016 NLY. THIS DRAWINGMODEL MAY NOT BE USED FOR CONSTRUCTION. 2.41-2014 KIT PART N0.

ROUND STEEL MT BURNER SYSTEMS PROTECTED

BY COPYRIGHT ©2016 LTD. CADdetails.com LL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIMECADDETAILS.COM OFSTAINLESS DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT STANDARDS.

ROUND BURNER SYSTEMS

BTU SPECS

ROUND BURNER SYSTEMS

ANUFACTURER TO BE CONSIDERED ACCURATE. 5053-017 FPB-16RBSMT-N #35 45,000 LPK#47 ONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER EFERENCE NUMBER 5053-017.

PROTECTED BY COPYRIGHT FPB-16RBSMT-P #47 ©2016 CADDETAILS.COM 45,500 LTD. #29 65,000 ROUND BURNER SYSTEMS

FPB-19RBSMT-N

FPB-19RBSMT-P #41 65,000 ROUND STAINLESS STEEL MT BURNER SYSTEMS FPB-25RBSMT-N #29 65,000

FPB-25RBSMT-P PYRIGHT ©2016 CADDETAILS.COM LTD. FPB-29RBSMT-N

20

-

LPK#41 LPK#41

#41

65,000

-

#29

65,000

LPK#41

FPB-29RBSMT-P

#41

65,000

-

FPB-33RBSMT-N

#29

65,000

LPK#41

FPB-33RBSMT-P

#41

65,000

-

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

GAS PRESSURE MIN. INLET

5.0" WC

REVISION 10.5"DATE WC 05/26/2016

MAX. INLET THESE FIRE PITS 10.5" WC 13.0" CADdetails.com WC ARE TESTED TO NORMAL INLET 7.0" WC 11.0" WC ANSI Z21.97-2014 / CSA 2.41-2014 DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0” WC FOR STANDARDS. NATURAL GAS (NG) AND 11.0” WC FOR LIQUID PROPANE REVISION DATE 05/26/2016 (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE CADdetails.com SIZING WILL ALSO AFFECT BTU’S. AS A RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE LISTED BTU SPECIFICATIONS.

This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

ROUND OPTIONAL ACCESSORIES TFS OPTIONAL ACCESSORIES TM-R-AF1TX

Wireless wall mount timer (30/60/120min)

1001D-AF1TX

Wireless wall mount switch (On/Off)

1322WT

Wireless wall mount switch (On/Off/High/Low)

WS

Wired wall mount switch (On/Off)

AF-4000ADP24(80)

110 volts AC adapter, coverts to 7.5 DC volts for TFS systems

AF-4000HAT

Home/Pool automation transmitter system (works with most manufacturers systems)

VENT-KIT-6X12

Includes two (2) 6” tall x 12” wide vents with mounting screws

LIDS

Stainless Steel lids with brushed finished

WINDSHIELDS

Tempered glass windshields

TMS OPTIONAL ACCESSORIES LPK#41

Liquid Propane (LP) Conversion Kit. Converts fire pit from Natural Gas to LP Gas. Includes: Orifice/Air Shutter, rating plate label sticker and instructions. For use with FPB-19,25/29/33RBSTMS-N

MSI-BSTMS

Manual Spark Ignition Kit for FPB Series TMS Systems featuring the Burning Spur. Kit Includes: Spark Igniter Module, Ignition Hood, Ignition Hood Screen, Ignition Rain Shield, 2-Probe Spark Igniter, Burner Rain Shield and Bracket, Ignition wiring, AAA Battery

VENT-KIT-6X12

Includes two (2) 6” tall x 12” wide vents with mounting screws

LIDS

Stainless Steel lids with brushed finished

WINDSHIELDS

Tempered glass windshields

MT OPTIONAL ACCESSORIES LPK#47

Liquid Propane (LP) Conversion Kit. Converts fire pit from Natural Gas to LP Gas. Includes: Orifice/Air Shutter, rating plate label sticker and instructions. For use with FPB-16RBSMT-N, 45,000 Btu

LPK#41

Liquid Propane (LP) Conversion Kit. Converts fire pit from Natural Gas to LP Gas. Includes: Orifice/Air Shutter, rating plate label sticker and instructions. For use with FPB-19/25/29/33RBSMT-N, 65,000 Btu

MSI-BSMTI

Manual Spark Ignition Kit for FPB Series Match Throw Systems featuring the Burning Spur. Kit includes: Mounting Plate, Spark Igniter Module, Ignition Hood, Ignition Hood Screen, Ignition Rain Shield, 2-Probe Spark Igniter, Burner Rain Shield and Bracket, Ignition Wiring, AAA Battery

VENT-KIT-6X12

Includes two (2) 6” tall x 12” wide vents with mounting screws

LIDS

Stainless Steel lids with brushed finished

WINDSHIELDS

Tempered glass windshields

21

10.5" WC 7.0" WC

13.0" WC 11.0" WC

SELECT DESIRED SYSTEM:

SQUARE BURNER SYSTEMS NATURAL GAS: SELECT DESIRED SYSTEM: SELECT DESIRED SYSTEM: LP GAS:

A C A A C C

www.firegearoutdoors.com www.firegearoutdoors.com

FIREGEAR OUTDOORS SPECIFICATIONS CONSERVATION WAY FPB-26SBSTFS-P FORT WAYNE, IN 46809 FPB-20SBSTFS-P FPB-20SBSTFS-P FPB-32SBSTFS-P TOLL FREE: 1-888-672-8929 FPB-26SBSTFS-P FPB-26SBSTFS-P FPB-38SBSTFS-P FPB-32SBSTFS-P FPB-32SBSTFS-P FAX: (888) 672-8024 www.firegearoutdoors.com FPB-38SBSTFS-P FPB-38SBSTFS-P

FPB-20SBSTFS-P FPB-20SBSTFS-N NATURAL GAS: LP LP GAS: NATURAL GAS: GAS: 9230 FPB-26SBSTFS-N FPB-20SBSTFS-N FPB-20SBSTFS-N

NS. E APPLICATION. THESE ARE NOT FIELD

FPB-32SBSTFS-N FPB-26SBSTFS-N

FPB-26SBSTFS-N SQUARE TFS SYSTEMS FPB-38SBSTFS-N FPB-32SBSTFS-N FPB-32SBSTFS-N

FPB-38SBSTFS-N FPB-38SBSTFS-N

GN PROFESSIONALS FOR PLANNING PURPOSES

SELECT DESIRED SYSTEM:

D AND APPROVED BY THE PRODUCT

A C

LP GAS:

NATURAL GAS:

FPB-20SBSTFS-N

FPB-20SBSTFS-P THESE FIRE PITS BTU LISTINGS FPB-26SBSTFS-N DISCLAIMER: FPB-26SBSTFS-P ARE TESTED TO ARE BASED ON 7.0" WC FOR NATURAL GAS (NG) AND 11.0" WC FOR ANSI Z21.97-2014 / LIQUID PROPANE (LP) AT THE BURNER FPB-32SBSTFS-N FPB-32SBSTFS-P DISCLAIMER: BTUBTU LISTINGS BASED ONON 7.0"7.0" WCWC FOR NATURAL DISCLAIMER: LISTINGS ARE BASED FOR NATURAL ORIFICE. FLEX LINE SIZEARE AND PROPER GAS PIPE SIZING WILL ALSO CSA 2.41-2014 GAS (NG) AND 11.0" WCAWC FOR LIQUID PROPANE (LP)(LP) AT AT THE BURNER GAS (NG) AND 11.0" FOR LIQUID PROPANE THE BURNER AFFECT BTU'S. AS RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM FPB-38SBSTFS-N FPB-38SBSTFS-P STANDARDS.

TOP VIEW A TOP VIEW TOP VIEW B A AC B B C C

H H H D

G

D D

G G

E

F

E E

F F

ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO THE LISTED BTU SPECIFICATIONS. AFFECT BTU'S. AS AS A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM REVISION DATE 06/09/2016 AFFECT BTU'S. A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM THE LISTED BTUBTU SPECIFICATIONS. THE LISTED SPECIFICATIONS. OUTSIDE DIM. MIN - MAX INSIDE

CLEARANCE TO COMBUSTIBLES FRONT VIEW H CLEARANCE TO A CLEARANCE TO OVERALL CLEARANCE TO A FRONT VIEW CLEARANCE TOTO COMBUSTIBLES FRONT VIEW CLEARANCE COMBUSTIBLES PAN CADdetails.com APPLIANCE COMBUSTIBLE FLOOR COMBUSTIBLE A COMBUSTIBLE TOP VIEW MODEL (INCLUDING LIP) CUT OUT DIM. PAN DIM. DEPTHOVERALL CLEARANCE TOTO A ACLEARANCE CLEARANCE CLEARANCE ATHE TOTO OVERALL CLEARANCE A PAN CLEARANCE CEILING HEIGHT FROM THE LIP TO OFTO SIDEWALL OUTSIDE DIM. - MAX INSIDE OUTSIDE DIM. MINMIN -BMAX INSIDE PAN A A C PAN D APPLIANCE COMBUSTIBLE FLOOR COMBUSTIBLE A COMBUSTIBLE APPLIANCE COMBUSTIBLE FLOOR COMBUSTIBLE A COMBUSTIBLE E F G H MODEL MODEL B DIM.PAN (INCLUDING LIP)LIP) CUT OUT DIM. DIM. DEPTH (INCLUDING CUT OUT PAN DIM. DEPTH D HEIGHT THE LIPLIP OF THE PAN CEILING HEIGHT FROM THE THE PAN SIDEWALL SIDEWALL CEILING 16" FPB-20SBSTFS-N 20 1/4" 12 3/4"G FROM 54" 18"OF OUTSIDE 22" CLEARANCE TO A CLEARANCE CLEARANCE A AX 22" B B-C21 3/4" C 20" D2 D3/4" C E12E3/4" F 18" G 16" H 54" F G H 22" X 22" 2 3/4" 20" FPB-20SBSTFS-P 20 1/4" - 21 3/4" DIM. 22"22" COMBUSTABLE TO 16" A 16" TO 18"18" FPB-20SBSTFS-N X 22" 1/4" - 21--21 3/4" 3/4" 54"A 223/4" FPB-20SBSTFS-N XX22" 12 54" 28" 28" 20 20 26" 2 3/4" 18" 69" 19" FPB-26SBSTFS-N 261/4" 1/4" 273/4" 3/4" 20"20" 3/4" 12OVERALL 123/4" 3/4" U LISTINGS ARE BASED FPB-20SBSTFS-P ONFPB-20SBSTFS-P 7.0" WC FOR NATURAL 22"22" X MIN 22" 3/4" 18"18" 16"16" 54"54" 20 20 1/4" - 21--21 3/4" 12 12 3/4" XX22" 22E3/4" 1/4" 3/4" 28" 28"- MAX (INCLUDING CUT FLOOR FROM COMBUSTABLE FPB-26SBSTFS-P 26 1/4" 27INSIDE 3/4" 20"20" 26" 2PAN 3/4" APPLIANCE 18" THE COMBUSTABLE 69" 19" 123/4" 3/4" F .0" WC FOR LIQUID PROPANE (LP) AT THE BURNER 19"19" 28"28" X 28" 26"26" 18"18" 69"69" FPB-26SBSTFS-N 3/4" 26 26 1/4" - 27-- 27 3/4" 2 3/4" XX28" FPB-26SBSTFS-N 12 223/4" FPB-32SBSTFS-N 34" 34" 32" DEPTH 3/4" 12HEIGHT 18" 19" 69" 32 1/4" 1/4" 333/4" 3/4"DIM. 123/4" 3/4" LIP) OUT DIM. PAN LIP OF PAN SIDEWALL CEILING NE SIZE AND PROPER GAS PIPE SIZING WILL ALSO 28"28" X 28" FPB-26SBSTFS-P 1/4" - 27-- 27 3/4" 3/4" 19"19" 18"18" 69"69" XX28" FPB-26SBSTFS-P 223/4" FPB-32SBSTFS-P 34" 34" 26 26 32 1/4" 1/4" 333/4" 3/4" 26"26" 32" 2 3/4" 3/4" 12 12 18" 19" 69" 123/4" 3/4" S A RESULT YOURMODEL BTU'S MAY VARY SLIGHTLY FROM A B C D E F G H FPB-32SBSTFS-N 1/4" - 33--33 3/4" 3/4" X 34" 18"18" 19"19" 69"69" FPB-32SBSTFS-N XX34" 223/4" 40" 40" 32 32 38" 2 3/4" 18" 19" 69" FPB-38SBSTFS-N 34"34" 381/4" 1/4" 393/4" 3/4" 32"32" 3/4" 12 12 123/4" 3/4" SPECIFICATIONS. CLEARANCE TO COMBUSTIBLES VIEW FPB-32SBSTFS-P X 34" 1/4" - 33--33 3/4" 3/4" 18"18" 19"19" 69"69" FPB-32SBSTFS-P XX34" 1/4" 3/4" 3/4" 223/4" 40" 40" 32 32 38" 2 3/4" 18" 19" 69" FPB-38SBSTFS-P 34"34" 38FRONT 1/4" 39 3/4" 32"32" 3/4" 12 12 12 3/4" X 20 40" 38"38" 2 18"18" 19"19" 69"69" FPB-38SBSTFS-N 12 12 3/4" 38 1/4" - 39- 39 3/4"3/4" 2 3/4" X 40" FPB-38SBSTFS-N 12 3/4" 38 1/4" 2 3/4" FPB-20SBSTFS-N 22" MODEL X 22"40"40" 1/4" 21 3/4" 20" 3/4" 3/4" 18" 16" 54" CLEARANCE TO A OVERALL CLEARANCE TO A CLEARANCE TO BTU BTU OUTPUT BTU OUTPUT 40"40" X 40" 18"18" 38 38 1/4"1/4" - ORFICE 39- 39 3/4"3/4" 38"38" 2 3/4" 3/4"3/4" XPAN 40" FACTORY FPB-38SBSTFS-P 2 3/4" 12 12 PRESSURE GAS TYPE19" NG19" GAS TYPE LP69"69" OUTSIDE DIM. FPB-38SBSTFS-P MIN - MAX INSIDE COMBUSTIBLE COMBUSTIBLE A COMBUSTIBLE APPLIANCE SPECIFICATIONS ON HIGH FLOORON LOW (INCLUDING LIP) CUT OUT DIM. PAN DIM. DEPTH BTU OUTPUT MODEL BTU BTU OUTPUT BTU OUTPUT MODEL BTU BTU OUTPUT MIN. INLET FPB-20SBSTFS-N #19 80,000 48,000 5.0" WC 10.5" WCLP FROM THE LIP OF THE PAN SIDEWALL CEILING HEIGHT PRESSURE GAS TYPE NG TYPE LP FACTORY ORFICE FACTORY ORFICE 20" PRESSURE GAS TYPE GAS TYPE FPB-20SBSTFS-P 22" X 22" 20 D1/4" - 21 3/4" 2 3/4" ONON 12 3/4" 18" 16"NG GAS 54" A B SPECIFICATIONS C LOW ONON HIGH LOW SPECIFICATIONS HIGH FPB-20SBSTFS-P #36 79,000 47,400 MAX. INLETH 10.5" WC 13.0" WC E F G MIN. INLET FPB-20SBSTFS-N 48,000 5.0" WC 10.5" WC #19 80,000 MIN. INLET FPB-20SBSTFS-N 48,000 #19 80,000 5.0" WC 10.5" WC FPB-26SBSTFS-N #7 105,000 51,000 NORMAL INLET 7.0" WC 11.0" WC 16" S-N 22" X 22" 20 1/4" - 21 3/4" 20" 12 3/4" 54" 18" 2 3/4" 47,400 MAX. INLET WCWC 13.0" WCWC #36 79,000 FPB-20SBSTFS-P 47,400 #36 79,000 MAX. INLET54" 10.5" 10.5" 13.0" 100,000 49,500 #31 FPB-26SBSTFS-P 20" 16" 18" 22" X 22" 2 3/4" 123/4" 3/4" S-P 20 1/4" - 21FPB-20SBSTFS-P 3/4" FPB-26SBSTFS-N 28" X 28" 26 1/4" 27 26" 2 3/4" 12 3/4" 18" 19" 51,000 INLET WCWC 11.0" WCWC 69" #7 105,000 FPB-26SBSTFS-N 51,000 105,000 NORMAL INLET 11.0" #7 105,000 51,000 FPB-32SBSTFS-N 28" X 28" 26" 18" 69" 7.0"7.0" 19" NORMAL 26 1/4" - 27FPB-26SBSTFS-N 3/4" 2 3/4" 12 #7 3/4" S-N 49,500 100,000 #31 49,500 100,000 FPB-26SBSTFS-P #31 FPB-26SBSTFS-P #31 100,000 49,500 FPB-32SBSTFS-P 28" X 28" 26" 2 3/4" 18" 69" 12 3/4" 19" S-P 26 1/4" - 27 3/4" 51,000 #7 105,000 51,000 #7 105,000 FPB-32SBSTFS-N #7 105,000 51,000 FPB-38SBSTFS-N 34"FPB-26SBSTFS-P X 34" 32" 2 3/4" 18" 19" 69" 32 1/4" - 33FPB-32SBSTFS-N 3/4" 123/4" 3/4" S-N 28" X 28" 26 1/4" 27 26" 2 3/4" 12 3/4" 18" 19" 69" 49,500 #31 100,000 49,500 100,000 FPB-32SBSTFS-P 100,000 49,500 FPB-38SBSTFS-P #31 32" 2 3/4" 18" 19" 69" 12#31 3/4" S-P 34" X 34" 32 1/4" - 33FPB-32SBSTFS-P 3/4" 51,000 #7 105,000 FPB-38SBSTFS-N 51,000 #7 105,000 FPB-38SBSTFS-N NOTES: 40" X 40" 38" 18" 19" 69" 38 1/4" - 39 3/4" 2 3/4" 12 3/4" S-N 49,500 100,000 #31#31 49,500 100,000 FPB-38SBSTFS-P 1.

ALL FIRE INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. 38" PIT 32 18" 69" 40" X 40" 2 3/4" 3/4" S-P 38 1/4" - 39FPB-38SBSTFS-P 3/4" FPB-32SBSTFS-N 34" X 34" 1/4" - 33123/4" 32" 2 3/4" 12 3/4" 19" 18" 19" 69" 2. THESE FIRE PITS ARE SOLD AS NATURAL OR LP GAS MODELS. YOU MUST ORDER THE SPECIFIC MODEL PER THE APPLICATION. THESE ARE NOT FIELD NOTES: NOTES:

MODEL BTU BTU OUTPUT BTU OUTPUT CONVERTIBLE. 1. 1.ALLALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO TO THETHE VALVE SYSTEMS ASNG WELL AS GAS CONNECTIONS. FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. FACTORY ORFICE PRESSURE GAS TYPE GAS TYPE LP PECIFICATIONS HIGH ON LOW 2. 2.

THESE FIRE PITS ARE SOLD AS AS NATURAL OROR LP LP GASGAS MODELS. YOU MUST ORDER THE SPECIFIC MODEL PERPER THETHE APPLICATION. THESE AREARE NOTNOT FIELD 3. THESE ALLON FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. FIRE PITS ARE SOLD NATURAL MODELS. YOU MUST ORDER THE SPECIFIC MODEL APPLICATION. THESE FIELD FPB-32SBSTFS-P 34" X 34" 32 1/4" 33 3/4" 32" 2 3/4" 12 3/4" 18" 19" 69" MIN.WHEN INLET #19 80,000 48,000 10.5" WC PB-20SBSTFS-N CONVERTIBLE. 4. CONVERTIBLE. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES INSTALLING5.0" FIREWC PITS . #36 79,000 47,400INCHES MAX. INLET 10.5" WC 13.0" WC PB-20SBSTFS-P 3. 3.

ALL FIRE PITS REQUIRE 18-SQUARE OF OF CROSS FLOW VENTILATION PERPER SIDE OF OF ENCLOSURE. 5. ALL DRAWINGS NOT TO SCALE. FIRE PITS REQUIRE 18-SQUARE INCHES CROSS FLOW VENTILATION SIDE ENCLOSURE. #7 51,000 NORMAL INLET 7.0" WC 11.0" WCAND DESIGN PROFESSIONALS FOR PLANNING PURPOSES PB-26SBSTFS-N 4. 4.

ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS . . CONSULTANTS 6. ALWAYS THIS105,000 DRAWING ISTO INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, ADHERE YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS FPB-38SBSTFS-N X 40" 38TO 1/4" - 39 3/4" 38"CONSTRUCTION. 2 3/4" 12 3/4" 18" 19" 69" 5. 40" DRAWINGS NOTNOT TO SCALE. ONLY. THIS DRAWING MAY NOT BE USED FOR 100,000 49,500 5.

DRAWINGS SCALE. #31 PB-26SBSTFS-P 7. THIS ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUSTAND BEAND REVIEWED AND APPROVEDFOR BYFOR THE PRODUCT 6. 6.

THIS DRAWING IS INTENDED FOR USE

BY BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS DESIGN PROFESSIONALS PLANNING PURPOSES DRAWING IS INTENDED FOR USE ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS DESIGN PROFESSIONALS PLANNING PURPOSES #7 105,000 51,000 PB-32SBSTFS-N MANUFACTURER TO BE CONSIDERED ACCURATE. ONLY. THIS DRAWING MAY NOT BE BE USED FOR CONSTRUCTION. ONLY. THIS DRAWING MAY NOT USED FOR CONSTRUCTION. #31 100,000 49,500 PB-32SBSTFS-P 7. 40" ALL INFORMATION HEREIN WAS CURRENT AT INFORMATION THE TIME OF OF DEVELOPMENT MUST BE BE REVIEWED APPROVED

BY BY THETHE PRODUCT 8. ALL CONTRACTOR'S NOTE: PRODUCT AND COMPANY VISIT AND ENTERANDAND 7.

INFORMATION CONTAINED HEREIN WAS CURRENT AT TIME DEVELOPMENT MUST REVIEWED APPROVED PRODUCT 69" FPB-38SBSTFS-P X 40" 1/4" -FOR 39 3/4" 38" 2THE 3/4" 12www.CADdetails.com/info 3/4" BUTBUT 18" 19" #7 105,000 38CONTAINED 51,000 PB-38SBSTFS-N MANUFACTURER TO TO BE BE CONSIDERED REFERENCE 5053-022.

MANUFACTURER CONSIDERED ACCURATE. 100,000 NUMBER 49,500 ACCURATE. #31 PB-38SBSTFS-P THESE FIRE PITS 8. 8.

CONTRACTOR'S NOTE: FORFOR PRODUCT ANDAND COMPANY INFORMATION VISIT www.CADdetails.com/info ANDAND ENTER CONTRACTOR'S NOTE: PRODUCT COMPANY INFORMATION VISIT www.CADdetails.com/info ENTER TES: ARE TESTED TO REFERENCE NUMBER 5053-022.

REFERENCE NUMBER 5053-022.

ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. THESE PITS THESE FIRE PITS / ANSIFIRE Z21.97-2014 THESE FIRE PITS ARE SOLD AS NATURAL OR LP GAS MODELS. YOU MUST ORDER THE SPECIFIC MODEL PER THE APPLICATION. THESE ARE NOT FIELD ARE TESTED TOTO ARE TESTED CSA 2.41-2014 CONVERTIBLE. OUTPUT BTUBURNER OUTPUT ANSI Z21.97-2014 / / SQUAREBTU STAINLESS STEEL TFS SYSTEMS ANSI Z21.97-2014 STANDARDS. ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSSORIFICE FLOW VENTILATION PER SIDE OF ENCLOSURE. MODEL FACTORY PRESSURE GAS TYPE NG GAS TYPE LP CSA 2.41-2014 CSA 2.41-2014 ONPITS HIGH ON LOW ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE .

5053-022 REVISION DATE 06/23/2016 SQUARE STAINLESS STEEL TFSTFS BURNER SYSTEMS SQUARE STAINLESS STEEL BURNER SYSTEMS STANDARDS. STANDARDS. DRAWINGS NOT TO SCALE. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES PROTECTED

BY COPYRIGHT CADdetails.com FPB-20SBSTFS-N #19 ©2016 CADDETAILS.COM 80,000 LTD. 48,000 MIN. INLET 5.0" WC 10.5" WC 5053-022 REVISION DATE 06/23/2016 5053-022 REVISION DATE 06/23/2016

SQUARE BURNER SYSTEMSGAS PRESSURE SQUARE SQUAREBURNER BURNERSYSTEMS SYSTEMS

BTU SPECS

ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. FPB-20SBSTFS-P #36AT 79,000LTD. ALL INFORMATION CONTAINED HEREIN WAS CURRENT THE TIME OF DEVELOPMENT BUT REVIEWED AND APPROVEDMAX.

BY THE INLET PRODUCT PROTECTED BYBY COPYRIGHT ©2016 CADDETAILS.COM PROTECTED COPYRIGHT ©2016 CADDETAILS.COM LTD.MUST BE47,400 MANUFACTURER TO BE CONSIDERED ACCURATE. FPB-26SBSTFS-N #7 105,000 51,000 NORMAL INLET CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER REFERENCE FPB-26SBSTFS-P NUMBER 5053-022. #31 100,000 49,500

SQUARE BURNER SYSTEMS #31 100,000

51,000

SQUARE STAINLESS STEEL TFS FPB-38SBSTFS-N #7BURNER SYSTEMS105,000

51,000

FPB-38SBSTFS-P

49,500

FPB-32SBSTFS-N

#7

105,000

FPB-32SBSTFS-P

OPYRIGHT ©2016 CADDETAILS.COM LTD.

#31

100,000

49,500

7.0" WC

13.0" WC CADdetails.com CADdetails.com 11.0" WC

THESE FIRE PITS DISCLAIMER: BTU ARE LISTINGS TESTED TO ARE BASED ON 7.0” WC FOR NATURAL GAS (NG) AND 11.0” ANSI Z21.97-2014 / WC FOR LIQUID PROPANE (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND CSA 2.41-2014 PROPER GAS PIPE SIZING WILL ALSO AFFECT BTU’S. AS STANDARDS. A RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE REVISION DATE 06/23/2016 LISTED BTU SPECIFICATIONS. CADdetails.com

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

22

10.5" WC

7.0" WC

11.0" WC SELECT DESIRED SYSTEM:

A

A C

C FIREGEAR OUTDOORS A WAY 9230 CONSERVATION SQUARE TMS SYSTEMS FPB-20SBSTMS-N FPB-20SBSTMS-P NATURAL GAS: LP GAS: C SELECT DESIRED SYSTEM: FORT WAYNE, IN 46809 FPB-26SBSTMS-N FPB-26SBSTMS-P FPB-20SBSTFS-P FPB-20SBSTFS-N S. NATURAL GAS: LP GAS: TOLL FREE: 1-888-672-8929 APPLICATION. THESE ARE NOT FIELD FPB-32SBSTMS-N FPB-32SBSTMS-P FPB-26SBSTFS-N FPB-26SBSTFS-P FPB-20SBSTMS-N FPB-20SBSTMS-P FAX: (888) 672-8024 FPB-38SBSTMS-N FPB-38SBSTMS-P FPB-32SBSTFS-N FPB-32SBSTFS-P FPB-26SBSTMS-N FPB-26SBSTMS-Pwww.firegearoutdoors.com NATURAL SELECT DESIREDGAS: SYSTEM:

N PROFESSIONALS FOR PLANNING PURPOSES

SELECT DESIRED SYSTEM:

AND APPROVED BY THE PRODUCT

NATURAL GAS:

LP GAS:

FPB-38SBSTFS-N FPB-32SBSTMS-N FPB-38SBSTMS-N

LP GAS:

FPB-38SBSTFS-P A FPB-32SBSTMS-P C FPB-38SBSTMS-P

TOP VIEW A TOP VIEW B A C B VIEW TOP C A B H C VIEW FRONT

FPB-20SBSTMS-P THESEBTU FIRELISTINGS PITS ARE BASED ON 7.0" WC FOR NATURAL DISCLAIMER: FPB-26SBSTMS-P FPB-26SBSTMS-N GAS (NG) AND 11.0" WCTO FOR LIQUID PROPANE (LP) AT THE BURNER ARE TESTED FLEX LINE SIZE/AND PROPER GAS PIPE SIZING WILL ALSO ANSI Z21.97-2014 FPB-32SBSTMS-P FPB-32SBSTMS-N ORIFICE. AFFECT BTU'S. AS A RESULT MAY DISCLAIMER: BTU2.41-2014 LISTINGS AREYOUR BASEDBTU'S ON 7.0" WCVARY FORSLIGHTLY NATURAL FROM CSA FPB-38SBSTMS-P FPB-38SBSTMS-N DISCLAIMER: BTUWC LISTINGS ARE PROPANE BASED ON(LP) 7.0" AT WCTHE FORBURNER NATURAL THE BTU SPECIFICATIONS. GAS (NG)LISTED AND 11.0" FOR LIQUID STANDARDS. FPB-20SBSTMS-N

GAS (NG) AND 11.0" WCAND FOR PROPER LIQUID PROPANE AT WILL THE BURNER ORIFICE. FLEX LINE SIZE GAS PIPE(LP) SIZING ALSO REVISION DATE 06/09/2016 ORIFICE. FLEX SIZEOUTSIDE AND PROPER GASVARY PIPE ALSO AFFECT BTU'S. ASLINE A RESULT YOUR BTU'S MINSIZING -SLIGHTLY MAX WILLFROM INSIDE PAN DIM. MAY AFFECT BTU'S. AS A RESULT YOUR BTU'S VARY SLIGHTLY FROM THE LISTED BTUCADdetails.com SPECIFICATIONS. MODEL DIM. DEPTH (INCLUDING LIP) MAY CUT OUT DIM. PAN TOP VIEW THE LISTED BTU SPECIFICATIONS.

TOLL FREE: 1-888-672-8929 www.firegearoutdoors.com FAX: (888) 672-8024 www.firegearoutdoors.com

H

G

H H

D D E E

GG D

F

CLEARANCE TO COMBUSTIBLES F F

OVERALL CLEARANCE TO A CLEARANCE TO A CLEARANCE TO APPLIANCE COMBUSTIBLE COMBUSTIBLE A COMBUSTIBLE E FLOOR CLEARANCE FRONT VIEW COMBUSTIBLES FRONT VIEW CLEARANCE TOTO COMBUSTIBLES SIDEWALL HEIGHTG FROM THE LIP OF THE PAN CEILING D OVERALL A BA C CLEARANCEG TO A CLEARANCE CLEARANCEF TO A E H TO OUTSIDE DIM. MIN - MAX PAND OVERALL CLEARANCE TO A CLEARANCE CLEARANCE B21 3/4"INSIDE 18"FLOOR 22" X 22" 20" 16" TO AA COMBUSTIBLE 54" TO COMBUSTIBLE COMBUSTIBLE FPB-20SBSTMS-N OUTSIDE 20MIN 1/4"- -MAX 6 5/8" 2 3/4"APPLIANCE INSIDE DIM. PAN MODEL (INCLUDING DIM. DIM. DEPTH APPLIANCE FLOOR COMBUSTIBLE ACLEARANCE COMBUSTIBLE 18" THE 54" 16" FPB-20SBSTMS-P 22" X LIP) 22" CUT 20OUT 1/4" -C21DIM. 3/4"PAN 2 3/4" HEIGHT 6 5/8" FROMCOMBUSTIBLE THE LIP OF PAN SIDEWALL CEILING CLEARANCE TO PAN20" DIM. DEPTH (INCLUDING FAPAN CLEARANCE LISTINGS ARE BASED ONFPB-26SBSTMS-N 7.0" MODEL WC FOROUTSIDE NATURAL A X 28"LIP) CUT BOUT SIDEWALL HEIGHT FROM THE LIP OF THE CEILING 19" 28" 26 1/4" - 27 3/4" C 26" D2 3/4" 18" 69" 6 5/8" E F G H D A B C DIM. OVERALL COMBUSTABLE TO A TO A 0" WC FOR LIQUID PROPANE (LP) AT THE BURNER 28" X 28" 2 3/4" 12 3/4" FPB-26SBSTMS-P 26 1/4" 27 3/4" 20" 26" 2 3/4" 6 E5/8" F G H 18" 18" FPB-20SBSTFS-N 22" X 22" 20 1/4" - 21- 3/4" 54" 69" 16" 19" NE SIZE AND PROPER GAS PIPE SIZING WILL ALSO (INCLUDING MIN MAX CUT INSIDE PAN APPLIANCE FLOOR FROM THE COMBUSTABLE COMBUSTABLE 34" 34" 20 20 32" 2 3/4" 18" 19" 69" 32 1/4" 1/4" 333/4" 3/4" 20"20" 3/4" 12 3/4" FPB-32SBSTMS-N 22"22" 5/8" XX22" FPB-20SBSTMS-N 665/8" 223/4" X 22" 18"18" 54"54" 16"16" FPB-20SBSTFS-P 1/4" - 21-- 21 3/4" A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM22" VIEW TO COMBUSTIBLES 32" 2EDEPTH 18"PAN 19" 69" 34"OUT26DIM. 3/4" 12 3/4" FPB-32SBSTMS-P 32FRONT 1/4" 33 3/4" DIM. 6HEIGHT 5/8" 18" FPB-20SBSTMS-P XX22" 20 1/4" 3/4" 223/4" 6CLEARANCE 5/8" 19"16" 28" 34" X 28" 26"20" 18" 69"54" FPB-26SBSTFS-N 1/4" - 27-- 21 3/4" 3/4" LIP) PAN LIP OF SIDEWALL CEILING PECIFICATIONS. 40" 40" 26 26 38 1/4" 1/4" 393/4" 3/4" 26"26" 38" 2 3/4" 3/4" 12 3/4" 18" 19" 69" FPB-38SBSTMS-N 28"28" 5/8" 19" XX28" 223/4" 69" FPB-26SBSTMS-N 665/8" X 28" FPB-26SBSTFS-P 1/4" - 27-- 27 3/4" 19" 18"18" 69"H MODEL A B C D E F G 38" 2 3/4" 3/4" 18" 19" 69" FPB-38SBSTMS-P 34"28" 40" 40" 32 26 38 1/4" 1/4" 393/4" 3/4" 32"26" 5/8" 223/4" 18" FPB-26SBSTMS-P XX28" 66CLEARANCE 5/8" FPB-32SBSTFS-N 1/4" - 33-- 27 3/4" X 34" 19"19" 69"69" OVERALL CLEARANCE TO A 12 3/4" TO A 18" CLEARANCE TO XPAN 34" 18" 19" 69" 32 1/4" - 33 3/4" 32"32" 2 3/4" 2 3/4" 12 3/4" FPB-32SBSTMS-N 6 5/8" MIN - MAX INSIDE OUTSIDE DIM. FPB-32SBSTFS-P 34"34" X 34" 32 1/4" 33 3/4" 18" 19" 69" COMBUSTIBLE FLOOR A18" COMBUSTIBLE FPB-20SBSTMS-N 22” PAN X 22” - 21 3/4” 22 3/4" 6COMBUSTIBLE 5/8” 16” 54" 69" 34" X20 34"1/4”APPLIANCE 3/4" 12 3/4" FPB-32SBSTMS-P 32 6 5/8" DIM. 40" X DEPTH 40" 18"18” 19"19" 69" (INCLUDING LIP) FPB-38SBSTFS-N CUT OUT DIM. 38 1/4"1/4" - 39- 33 3/4"3/4"20"38"32" 2 3/4" HEIGHT FROM THE LIP OF THECONVERSION PAN 6 5/8"SIDEWALL CEILING MODEL BTU 40" X 40" 38 1/4" 39 3/4" 38" 2 3/4" 18" FPB-38SBSTMS-N 40" X 40" 38" 18" FPB-38SBSTFS-P 38 1/4" - ORFICE 39 3/4" 12 3/4" 2 3/4" D FACTORY A B C GAS TYPE19" NG19" GAS TYPE LP69"69" BTU OUTPUT PRESSURE SPECIFICATIONS 38" F 2 3/4" KIT PART 18" H 19" 69" FPB-38SBSTMS-P 40" X 40" 38 E1/4" - 39 3/4" 6 5/8"NO. G BTU OUTPUT MODEL BTU 220 BTU 18" 2 3/4" 22"FPB-20SBSTMS-P X 22" 20" 3/4" N 20 1/4" - 21 3/4" 6 ORFICE 5/8" LPK#41 MIN. INLET54"GAS TYPE 5.0" WC 10.5" LP WC 54" #29 65,500 22” X 22” 1/4” - 21 3/4” 20"OUTPUT 6 5/8” 16" 18” FPB-20SBSTMS-N PRESSURE NG16” GAS TYPE FACTORY ON LOW ON HIGH 18" 54" P 22" X 22" 20 1/4" - 21SPECIFICATIONS 3/4" 2 3/4" 6 5/8" 20" 16" MAX. INLET 65,000 10.5" WC 13.0" WC #41 FPB-20SBSTMS-P MIN. INLETINLET 48,000 WCWC 10.5" WCWC #19 80,000 N 6 5/8" 19" 28" X 28" 26 1/4" - 27FPB-20SBSTFS-N 3/4" 26" BTU 2 3/4" 18" 69" 5.0"7.0" 65,500 CONVERSION MODEL NORMAL 11.0" #29 FPB-26SBSTMS-N LPK#41 GAS TYPE NG GAS TYPE LP FACTORY ORFICE BTU OUTPUT PRESSURE 47,400 MAX. INLET 79,000 P 28"FPB-26SBSTMS-N X 28" 26 1/4" - 27FPB-20SBSTFS-P 3/4" 6 5/8" 26" 226 3/4" 18" 2 3/4"KIT #41 65,000 FPB-26SBSTMS-P 28” X 28” 1/4” - #36 27 3/4” 26" 6 5/8” 18" 69" 10.5" WC 19” 13.0" WC 69” SPECIFICATIONS PART NO. 19" 51,000 WCWC 11.0" WCWC #7 105,000 34" X 34" 32" 18" 19" NORMAL N 6#29 5/8" 32 1/4" - 33FPB-26SBSTFS-N 3/4" 2 3/4" #29 65,500 LPK#41 FPB-32SBSTMS-N LPK#41 MIN. INLET INLET69" 7.0"5.0" 10.5" 65,500 FPB-20SBSTMS-N 49,500 100,000 #31 34" X 34" 32" 18" 19" P 32 1/4" - 33FPB-26SBSTFS-P 3/4" 6 #41 5/8" 2 3/4" 65,000 #41 FPB-32SBSTMS-P MAX. INLET69" 65,000 10.5" WC 13.0" WC FPB-20SBSTMS-P #7 105,000 N 6#29 5/8" 40"FPB-26SBSTMS-P X 40" 38 1/4" - 39FPB-32SBSTFS-N 3/4" 38" 226 3/4" 18" 2 3/4" 51,000 69" 65,500 #29 LPK#41 FPB-38SBSTMS-N 65,500 28” X 28” 1/4” - 27 3/4” 26" 6 5/8” 19" 18"INLET NORMAL 7.0" WC19” 11.0" WC 69” FPB-26SBSTMS-N LPK#41 49,500 #31 100,000 FPB-32SBSTFS-P P 40" X 40" 38 1/4" - 39 3/4" 6 #41 5/8" 38" 2 3/4" 18" 19" 69" #41 65,000 FPB-38SBSTMS-P 65,000 FPB-26SBSTMS-P 51,000 #7#29 105,000 FPB-38SBSTFS-N 65,500 LPK#41 FPB-32SBSTMS-N 100,000 NOTES: 65,000 2 3/4" 49,500 6 5/8” FPB-32SBSTMS-P FPB-32SBSTMS-N FPB-38SBSTFS-P 34” X 34” 32 1/4” - #31 33#41 3/4” 32" 18" 19” 69" CONVERSION MODEL BTU 1.

ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS SYSTEMS AS WELL AS GAS CONNECTIONS. NOTES: 65,500 TO THE VALVE #29 LPK#41 FPB-38SBSTMS-N GAS TYPE NG GAS TYPE LP FACTORY ORFICE BTU OUTPUT PRESSURE 2. THESE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS ANDVALVE MUST SYSTEMS BE CONVERTED TOAS LP GAS GAS.CONNECTIONS. 1. ALL FIRE PIT INSTALLATIONS SHOULD ACCESS TO THE AS WELL KIT PART NO.PROVIDE ECIFICATIONS 65,000 #41 FPB-38SBSTMS-P 3. ALL FIRE PITSARE REQUIRE VENTILATION PER SIDE OF ENCLOSURE. 2. THESE PITS AS NATURAL OR LP OF GAS MODELS. YOU MUST ORDER THE SPECIFIC MODEL PER THE APPLICATION. THESE LPK#41 MIN.FLOW INLET 5.0"6 WC 10.5" WC #29 65,500 B-20SBSTMS-N FPB-32SBSTMS-P 34” XFIRE 34” 32 SOLD 1/4”18-SQUARE - 33 3/4”INCHES 32"CROSS 2 3/4" 5/8” 18" 19" ARE NOT FIELD 69" CONVERTIBLE. 4. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIREWC PITS .

MAX. INLET 65,000 B-20SBSTMS-P 10.5" 13.0" WC #41 NOTES: 3. 1.ALL FIRE PITSPIT REQUIRE 18-SQUARE INCHESPROVIDE OF CROSS FLOW TO VENTILATION SIDE ENCLOSURE. 5. ALL DRAWINGS NOT TO SCALE. 65,500 B-26SBSTMS-N LPK#41 NORMAL INLET 7.0" WC OF 11.0" #29 FIRE INSTALLATIONS SHOULD ACCESS THE VALVE PER SYSTEMS AS WELL AS GASWC CONNECTIONS. 6. THESE THIS 65,000 DRAWING ISMODELS INTENDED FOR USE

BY ARCHITECTS, ENGINEERS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES 4. 2.ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS . #41 B-26SBSTMS-P FIRE PIT GAS AND MUST CONTRACTORS, BE CONVERTED FPB-38SBSTMS-N 40” X 40” 38 1/4” -ARE 39 SHIPPED 3/4” AS NATURAL 38" 2 3/4" 6 5/8” TO LP GAS. 18" 19" 69" ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. 5.

DRAWINGS NOT TO SCALE. LPK#41 INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. #29 65,500 B-32SBSTMS-N 3. ALL FIRE PITS REQUIRE 18-SQUARE 7.

ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT 6.

THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES 65,000 4. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS . #41 B-32SBSTMS-P MANUFACTURER BENOT CONSIDERED ACCURATE. THIS DRAWING MAY BE USED FOR CONSTRUCTION. 5.ONLY. DRAWINGS TOTO SCALE. LPK#41 #29 B-38SBSTMS-N FPB-38SBSTMS-P 40” X 65,500 40” NOT38 1/4” - 39 3/4”WAS 38" AT INFORMATION 2TIME 3/4” 6 5/8” BUT MUST BE REVIEWED 18"ENTERAND APPROVED BY 19" 69" 7. 6.ALL INFORMATION CONTAINED HEREIN CURRENT THE OF CONTRACTORS, DEVELOPMENT THE PRODUCT 8. THIS CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY VISIT www.CADdetails.com/info DRAWING INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONSULTANTSAND AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES #41 65,000 IS B-38SBSTMS-P MANUFACTURER TO BE CONSIDERED REFERENCE NUMBER 5053-026.

ONLY. THIS DRAWING MAY NOT BE ACCURATE. USED FOR CONSTRUCTION. THESE FIRE PITS 8. 7.CONTRACTOR'S NOTE:CONTAINED FOR PRODUCT ANDWAS COMPANY INFORMATION VISIT AND ALL INFORMATION HEREIN CURRENT AT THE TIME OF www.CADdetails.com/info DEVELOPMENT BUT MUST BEENTER REVIEWED AND APPROVED BY THE PRODUCT ES: ARE TESTED TO REFERENCE NUMBERTO5053-022.

MANUFACTURER BE CONSIDERED ACCURATE. LL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. THESE FIRE PITS / ANSI Z21.97-2014 8. NATURAL CONTRACTOR'S PRODUCT AND COMPANY HESE FIRE PIT MODELS ARE SHIPPED AS GAS ANDNOTE: MUSTFOR BE CONVERTED TO LP GAS. INFORMATION VISIT www.CADdetails.com/info AND ENTER ARECSA TESTED TO 2.41-2014 REFERENCE NUMBER 5053-026.PER SIDE OF ENCLOSURE. CONVERSION LL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION THESE FIRE ANSI Z21.97-2014 / SQUAREBTU STAINLESS STEEL TMS BURNER SYSTEMS MODEL FACTORY ORIFICE OUTPUT PRESSURE GAS TYPE NG GAS TYPE LP PITS STANDARDS. LWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS .

KIT PART N0.

ARE2.41-2014 TESTED TO CSA RAWINGS NOT TO SCALE. 5053-026 REVISION 06/23/2016 SQUARE STAINLESS STEEL TFS BURNER SYSTEMS ANSIDATE Z21.97-2014 / STANDARDS. HIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES FPB-20SBSTMS-N #29 65,500 LPK#41 MIN. INLET 5.0" WC 10.5" WC CSA 2.41-2014 PROTECTED COPYRIGHT ©2016 CADDETAILS.COM LTD. CADdetails.com NLY. THIS DRAWING MAY NOT BE USEDBY FOR CONSTRUCTION. 5053-022 REVISION DATE 06/23/2016 SQUARE STAINLESS STEEL TMS BURNER SYSTEMS LL INFORMATION CONTAINED HEREIN WAS CURRENT AND APPROVEDMAX.

BY THE INLET PRODUCT STANDARDS. FPB-20SBSTMS-P #41AT THE TIME OF DEVELOPMENT 65,000 BUT MUST BE REVIEWED 10.5" WC 13.0" WC MANUFACTURER TO PROTECTED BE CONSIDEREDBY ACCURATE. COPYRIGHT ©2016 CADDETAILS.COM LTD. CADdetails.com 5053-026 REVISION DATE FPB-26SBSTMS-N #29 65,500 LPK#41 NORMAL INLET 7.0" WC 11.0" WC 06/23/2016 ONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER

SQUARE BURNER SYSTEMSGAS PRESSURE SQUARE BURNER SYSTEMS SQUARE BURNER SYSTEMS

BTU SPECS

EFERENCE NUMBER 5053-026.

PROTECTED BY COPYRIGHT FPB-26SBSTMS-P #41 ©2016 CADDETAILS.COM 65,000 LTD.

#29 65,500 SQUARE BURNER SYSTEMS

FPB-32SBSTMS-N

FPB-32SBSTMS-P #41 65,000 SQUARE STAINLESS STEEL TMS BURNER SYSTEMS FPB-38SBSTMS-N #29 65,500

FPB-38SBSTMS-P PYRIGHT ©2016 CADDETAILS.COM LTD.

#41

LPK#41 LPK#41

65,000

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

-

THESE FIRE PITS

CADdetails.com

ARE LISTINGS TESTED TO ARE BASED ON 7.0” WC FOR DISCLAIMER: BTU ANSI Z21.97-2014 / WC FOR LIQUID PROPANE NATURAL GAS (NG) AND 11.0” CSA 2.41-2014 (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND STANDARDS. PROPER GAS PIPE SIZING WILL ALSO AFFECT BTU’S. AS A RESULT YOUR MAY VARY SLIGHTLY FROM THE REVISION BTU’S DATE 06/23/2016 LISTED BTU SPECIFICATIONS. CADdetails.com This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

23

7.0" WC

11.0" WC

A C

SELECT DESIRED SYSTEM:

A FIREGEAR OUTDOORS C 9230 CONSERVATION A WAY SQUARE MT SYSTEMS FPB-20SBSMT-P FORT WAYNE, INC46809 FPB-20SBSMT-N NATURAL GAS: SYSTEM: LP GAS: SELECT DESIRED S. FPB-26SBSMT-N TOLL FREE: 1-888-672-8929 FPB-20SBSTFS-P FPB-20SBSTFS-N NATURAL GAS: LP FPB-26SBSMT-P GAS: APPLICATION. THESE ARE NOT FIELD FAX: (888) 672-8024 FPB-32SBSMT-N FPB-32SBSMT-P FPB-26SBSTFS-N FPB-26SBSTFS-P FPB-20SBSMT-P FPB-20SBSMT-N www.firegearoutdoors.com FPB-38SBSMT-N FPB-38SBSMT-P FPB-32SBSTFS-N FPB-32SBSTFS-P NATURAL SELECT DESIREDGAS: SYSTEM:

FPB-26SBSMT-N

N PROFESSIONALS PLANNING PURPOSES SELECT DESIREDFOR SYSTEM:

AND APPROVED

BY THE PRODUCT LP GAS: NATURAL GAS:

FPB-20SBSMT-N

LP GAS:

FPB-38SBSTFS-N FPB-32SBSMT-N

FPB-26SBSMT-P A FPB-38SBSTFS-P FPB-32SBSMT-P C

FPB-38SBSMT-N

FPB-38SBSMT-P

TOP VIEW A TOP VIEW B A C TOP B VIEW C A B H C FRONT VIEW

FPB-20SBSMT-P

THESE FIRELISTINGS PITS ARE BASED ON 7.0" WC FOR NATURAL FPB-26SBSMT-N DISCLAIMER: FPB-26SBSMT-P BTU ARE TESTED AND 11.0" WCTO FOR LIQUID PROPANE (LP) AT THE BURNER FPB-32SBSMT-N GAS (NG) FPB-32SBSMT-P ANSI Z21.97-2014 ORIFICE. FLEX LINE SIZE/AND PROPER GAS PIPE SIZING WILL ALSO CSA 2.41-2014 FPB-38SBSMT-N AFFECTFPB-38SBSMT-P BTU'S. AS A RESULT YOUR BTU'S MAY SLIGHTLY FROM DISCLAIMER: BTU LISTINGS ARE BASED ONON 7.0" WCVARY FOR NATURAL DISCLAIMER: BTU LISTINGS ARE BASED 7.0" WC FOR NATURAL STANDARDS. BTUWC SPECIFICATIONS. GASTHE (NG)LISTED AND 11.0" FOR LIQUID PROPANE (LP) AT THE BURNER

FAX:FREE: (888) 1-888-672-8929 672-8024 TOLL www.firegearoutdoors.com FAX: (888) 672-8024 www.firegearoutdoors.com

H

G

H

H

D

D E E

G

G

F

D CLEARANCE TO COMBUSTIBLESF

F GAS (NG) AND 11.0" WC FOR LIQUID PROPANE (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO REVISION DATE 06/09/2016 ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO OVERALL CLEARANCE TO A CLEARANCE TO A CLEARANCE TO AFFECT BTU'S. ASAS A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM MIN - MAX INSIDE OUTSIDE DIM. PAN E FLOOR CLEARANCE AFFECT BTU'S. A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM TO COMBUSTIBLES FRONT VIEWCOMBUSTIBLE TOP VIEW APPLIANCE COMBUSTIBLE A COMBUSTIBLE CADdetails.com GVIEW THE LISTED BTU SPECIFICATIONS. MODEL FRONT CLEARANCE TO COMBUSTIBLES (INCLUDING LIP) CUT OUT THE LISTED BTU SPECIFICATIONS. A DIM. PAN DIM. DEPTH SIDEWALL HEIGHT FROM THE LIP OF THE PAN CEILING

D OVERALL A BB C A ACLEARANCE CLEARANCE A A CLEARANCE D G TOTO H TOTO E F TOTO OVERALL CLEARANCE CLEARANCE CLEARANCE OUTSIDE DIM. - MAX PAN C21 3/4"INSIDE INSIDE DIM. MIN PAN 22" X 22" 20" 16" 54" 18"FLOOR COMBUSTIBLE COMBUSTIBLE A COMBUSTIBLE 2 3/4"APPLIANCE FPB-20SBSMT-N OUTSIDE 20MIN 1/4"- -MAX 6 5/8" APPLIANCE COMBUSTIBLE FLOOR COMBUSTIBLE A COMBUSTIBLE MODEL (INCLUDING DIM. DIM. DEPTH F LISTINGS ARE BASED ON FPB-20SBSMT-P 7.0" WC FOROUTSIDE NATURAL MODEL CLEARANCE TOPAN A CLEARANCE CLEARANCE PAN DIM. DEPTH 54" 18" THE (INCLUDING CUT OUT 22" X LIP) 22"LIP) CUT 20OUT 1/4" - 21DIM. 3/4"PAN 2 3/4" HEIGHT 6 5/8" 20" 16" THE LIPLIP OF CEILING SIDEWALL HEIGHT FROM FROM THE OF THE PAN SIDEWALL CEILING A AX 28" B B- 27 3/4" C 26" D2 D3/4" 0" WC FOR LIQUID PROPANE (LP) AT THE BURNER 28" FPB-26SBSMT-N 6 5/8" 26 1/4" 18" 19" C EOVERALL F G H 69" DIM. COMBUSTABLE TO A TO E F G HA NE SIZE AND PROPER GASFPB-26SBSMT-P PIPE SIZING WILL ALSO 28" X 28" 26 1/4" 27 3/4" 20" 26" 2 3/4" 6 5/8" 2 3/4" 12 3/4" 18" 69" 19" 18" FPB-20SBSTFS-N 22"22" X 22" 20 20 1/4" - 21--21 3/4" 54" 16" X 22" 20" 54" 18" 16" (INCLUDING MIN MAX CUT INSIDE PAN APPLIANCE FLOOR FROM THE COMBUSTABLE COMBUSTABLE 2 3/4" FPB-20SBSMT-N 1/4" 3/4" 6 5/8" A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM X 34" 20 1/4" 18" 19" 69" FPB-32SBSMT-N 6 5/8" 2 3/4" 12 3/4" 32FRONT 1/4" 33 3/4" 20" 32" 2E3/4" CLEARANCE TO COMBUSTIBLES VIEW 22" 34" X 22" 18"18" 54"54" 16"16" FPB-20SBSTFS-P - 21--21 3/4" FPB-20SBSMT-P XX 22" 20 3/4" 223/4" 6HEIGHT 20" PECIFICATIONS. LIP) 28"22" OUT26DIM. LIP18" OF18"PAN SIDEWALL CEILING 34" 34" 32" 2DEPTH 19" 69" FPB-32SBSMT-P 321/4" 1/4" - 3/4" 33PAN 3/4" DIM. 65/8" 5/8" 3/4" 12 3/4" 19" X 28" 26" 69" FPB-26SBSTFS-N 1/4" 27 3/4" FPB-26SBSMT-N 665/8" 19" XX28" 26 - 27 223/4" 18" 69" FPB-38SBSMT-NA 28"28" 5/8" 40" 40" B 381/4" 1/4" 393/4" 3/4"C 26"26" 38" 2 3/4" 3/4" 12 3/4" 19" 69" X 28" FPB-26SBSTFS-P 26 1/4" - 27--27 3/4" 19" 18" 69"H69" MODEL D3/4" E F18" G 19" OVERALL CLEARANCE TO A CLEARANCE TO A CLEARANCE TO FPB-26SBSMT-P 28" X 28" 26 1/4" 3/4" 6 5/8" 26" 2 18" FPB-38SBSMT-P 40" X 40" 32 1/4" 38 1/4" 39 3/4" 32" 38" 2 3/4" 6 5/8" 2 3/4" 12 3/4" 18" 19" 69" MIN - MAX INSIDE OUTSIDE DIM. FPB-32SBSTFS-N - 33--33 3/4" 34"34" X 34" 18" 19" 69" XPAN 34" APPLIANCE 32" 18" 19" 69" FPB-32SBSMT-N 6 5/8" 32 1/4" 3/4"COMBUSTIBLE 2 3/4" FLOOR COMBUSTIBLE A COMBUSTIBLE 34" X 34" 32 1/4" 33 3/4" 12 3/4" 32" 2 3/4" 18" 19" 69" PAN DIM. DEPTH (INCLUDING LIP) FPB-32SBSTFS-P CUT OUT DIM. FPB-20SBSMT-N 22” X 22” 20 1/4” 21 3/4” 20" 2 3/4" 6 5/8” 18” 16” 54" 34" X 34" 32" LIP OF 18" 19" 69" FPB-32SBSMT-P 32 1/4" - 33 3/4" 6 5/8"SIDEWALL 2 3/4" FROM38" THE THE PAN X 40" 18"18"CEILING 19"19" 69"69" FPB-38SBSTFS-N 12 3/4" 38HEIGHT 1/4"1/4" - 39- 39 3/4"3/4" D A B C40"40" FPB-38SBSMT-N 6 5/8" X 40" 38 38" F2 3/4" 2 3/4" CONVERSION MODEL BTU E G H 40" X 40" 38" 18" 19" 69" FPB-38SBSTFS-P 38 1/4" 39 3/4" 12 3/4" 2 3/4" FACTORY OUTPUT GAS TYPE NG19" GAS TYPE LP 69" PRESSURE FPB-38SBSMT-P 38 1/4"ORFICE - 39 3/4" BTU38" 6 5/8"NO. 16" 3/4" KIT PART 18" 22"FPB-20SBSMT-P X 22" 20" 40" X20 18"223/4" 2 40" 3/4" N 20 1/4" - 21 3/4" 6 5/8" SPECIFICATIONS 22” X 22” 1/4” - 21 3/4” 20" OUTPUT 6 5/8” 18” 54" 16” 54" BTU OUTPUT MODEL BTU 2 3/4" BTU 54" 18" #29 65,000 LPK#41 MIN. INLET 5.0" WC 10.5" LP WC P 22" X 22" 20 1/4" - 21 3/4" 6 5/8" 20" 16" FPB-20SBSMT-N PRESSURE GAS TYPE NG GAS TYPE FACTORY ORFICE ON LOW ON HIGH 65,000 MAX. INLET N 6 5/8" 28" X 28" 26 1/4" - 27SPECIFICATIONS 3/4"FPB-20SBSMT-P 26" 2 3/4" 18" 69" 19" #41 10.5" WC 13.0" WC CONVERSION MODEL BTU MIN. INLET 5.0"7.0" WC WCWCLP 69” 80,000 65,000 P 28"FPB-26SBSMT-N X 28" 26 1/4" - 27FPB-20SBSTFS-N 3/4" 6 5/8" 26" 2 3/4" 18"2 3/4" 48,000 69" GAS 19" FPB-26SBSMT-N LPK#41 #29 NORMAL WC 11.0" TYPE NG 10.5" GAS TYPE FACTORY ORFICE 26" BTU OUTPUT PRESSURE 28” X 28” 26 1/4” - #19 27 3/4” 6 5/8” 18" INLET 19” KIT PART NO. 19" SPECIFICATIONS FPB-20SBSTFS-P 47,400 MAX. INLET 69" 10.5" WC 13.0" WC #36 79,000 #41 65,000 34" X 34" 32" 18" N 6 5/8" 2 3/4" 32 1/4" - 33 3/4"FPB-26SBSMT-P LPK#41 MIN. INLET INLET69" 7.0"5.0" 10.5" 65,000 FPB-20SBSMT-N 51,000 WCWC 11.0" WCWC #7 105,000 LPK#41 #29 65,000 34" X 34" 32" 18" 19" NORMAL FPB-32SBSMT-N P 32 1/4" - 33FPB-26SBSTFS-N 3/4" 6 #29 5/8" 2 3/4" 65,000 MAX. INLET69" FPB-20SBSMT-P 10.5" WC 13.0" WC 69” 100,000 65,000 #41 N 6 #41 5/8" 40"FPB-26SBSMT-P X 40" 38 1/4" - 39FPB-26SBSTFS-P 3/4" 38" 2 3/4" 18"2 3/4" 49,500 6 5/8” 19" FPB-32SBSMT-P 28” X 28” 26 1/4” - #31 27 3/4” 26" 18" 19” 65,000 FPB-26SBSMT-N LPK#41 NORMAL INLET 7.0" WC 11.0" WC 51,000 #7 105,000 LPK#41 #29 65,000 P 40" X 40" 38 1/4" - 39FPB-32SBSTFS-N 3/4" 6 #29 5/8" 38" 2 3/4" 18" 19" 69" FPB-38SBSMT-N 65,000 FPB-26SBSMT-P 49,500 #31#41 100,000 FPB-32SBSTFS-P #41 65,000 FPB-38SBSMT-P LPK#41 65,000 2 3/4" 51,000 FPB-32SBSMT-N #7#29 105,000 FPB-32SBSMT-N FPB-38SBSTFS-N 34” X 34” 32 1/4” - 33 3/4” 32" 6 5/8” 18" 19” 69" 65,000 FPB-32SBSMT-P 49,500 100,000 FPB-38SBSTFS-P #31#41 MODEL BTU CONVERSION NOTES: FACTORY ORFICE FPB-38SBSMT-N BTU OUTPUT GAS TYPE NG GAS TYPE LP PRESSURE LPK#41 #29 65,000 1. ALL FIRE PIT INSTALLATIONS SHOULD NOTES: ECIFICATIONS KIT PART NO. PROVIDE ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. #41 65,000 FPB-32SBSMT-P X 34” 32MODELS 1/4” -LPK#41 33 3/4” 2 3/4" 6 WC 5/8” 18" 19" 69" 2.FPB-38SBSMT-P THESE FIRE PIT ARE SHIPPED AS 32" NATURAL GAS AND MUST SYSTEMS BE 5.0" CONVERTED TOAS LP GAS GAS. 1. 34” ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE AS WELL CONNECTIONS. #29 65,000 MIN. INLET 10.5" WC B-20SBSMT-N 2. THESE PITS SOLD 18-SQUARE AS NATURALINCHES OR LP OF GASCROSS MODELS. YOU MUST ORDER THE SPECIFIC MODEL PER THE APPLICATION. THESE ARE NOT FIELD 3. ALLFIRE FIRE PITSARE REQUIRE VENTILATION SIDE OF ENCLOSURE. 65,000 MAX.FLOW INLET B-20SBSMT-P #41 10.5"PER WC 13.0" WC NOTES: CONVERTIBLE. 4. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING7.0" FIREWC PITS .

65,000 B-26SBSMT-N LPK#41 #29 NORMAL INLET 11.0" WC FPB-38SBSMT-N 40” X FIRE 40” 38TO1/4” - 39 SHOULD 3/4” 38" ACCESS 2 3/4" 6SIDE 5/8”OF 18" 19" 69" INSTALLATIONS THE VALVE PER SYSTEMS AS WELL AS GAS CONNECTIONS. 3. 1.

ALL FIRE PITSPIT REQUIRE 18-SQUARE INCHESPROVIDE OF CROSS FLOW TO VENTILATION ENCLOSURE. 5. ALL DRAWINGS NOT SCALE. #41 65,000 B-26SBSMT-P 2.

THESE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE CONVERTED TO LP GAS. 6. THIS 65,000 DRAWINGTO ISYOUR INTENDED FOR USE

BY ARCHITECTS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES 4. ALWAYS ADHERE STATE AND LOCAL CODES WHENENGINEERS, INSTALLINGCONTRACTORS, FIRE PITS .

LPK#41 #29 B-32SBSMT-N ALL FIRE PITS REQUIRE 18-SQUARE INCHES OFCONSTRUCTION. CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. ONLY. THIS DRAWING NOT BE USED FOR 5. 3.

DRAWINGS NOT TO SCALE.MAY 65,000 #41 B-32SBSMT-P FPB-38SBSMT-P 40” X INFORMATION 40” 38TO 1/4” -FOR 39 3/4” 38" 2 INSTALLING 3/4” 6 5/8” 19" 69" 4.

ALWAYS ADHERE YOUR STATE AND LOCAL CODESENGINEERS, WHEN FIRE PITSCONSULTANTS .

7.

ALL CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUSTAND BE18" REVIEWED AND APPROVED

BY THE PRODUCT 6.

THIS DRAWING IS INTENDED USE BY ARCHITECTS, CONTRACTORS, DESIGN PROFESSIONALS FOR PLANNING PURPOSES #29 65,000NOT TO SCALE.LPK#41 B-38SBSMT-N 5.

DRAWINGS MANUFACTURER TO BENOT CONSIDERED ACCURATE. ONLY. THIS DRAWING MAY BE USED FOR CONSTRUCTION. #41 65,000 IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES B-38SBSMT-P 6. THIS DRAWING

7. ALL INFORMATION CONTAINED WAS CURRENT AT INFORMATION THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED 8. CONTRACTOR'S NOTE: FOR HEREIN PRODUCT AND COMPANY VISIT www.CADdetails.com/info AND ENTERAND APPROVED BY THE PRODUCT ONLY. THIS DRAWING MAY NOT BE ACCURATE. USED FOR CONSTRUCTION. MANUFACTURER TO BE CONSIDERED REFERENCE NUMBER 5053-030.

ES: ALL INFORMATION HEREIN CURRENT AT THE TIME OF www.CADdetails.com/info DEVELOPMENT BUT MUST BEENTER REVIEWED AND APPROVED BY THE PRODUCT THESE FIRE PITS 8. 7.CONTRACTOR'S NOTE:CONTAINED FOR PRODUCT ANDWAS COMPANY INFORMATION VISIT AND LL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. ARE TESTED TO MANUFACTURER BE CONSIDERED ACCURATE. REFERENCE NUMBERTO5053-022.

CONVERSION HESE FIRE PIT MODELS ARE SHIPPED AS GAS ANDNOTE: MUSTFOR BE CONVERTED TO LP GAS. INFORMATION VISIT www.CADdetails.com/info AND ENTER THESE FIRE PITS / 8. NATURAL CONTRACTOR'S PRODUCT AND COMPANY ANSI Z21.97-2014 MODEL FACTORY ORIFICE BTU OUTPUT PRESSURE GAS TYPE NG GAS TYPE LP LL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION ARE CSA TESTED TO REFERENCE NUMBER 5053-030.PER SIDE OF ENCLOSURE. KIT PART N0.

2.41-2014 THESE FIRE PITS LWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS . STEEL MT BURNER SYSTEMS ANSI Z21.97-2014 / SQUARE STAINLESS STANDARDS. ARE TESTED TO RAWINGS NOT TO SCALE. CSA 2.41-2014 #29ENGINEERS, CONTRACTORS, 65,500 CONSULTANTSLPK#41 MIN. INLET 5.0" WC 10.5" WC HIS DRAWINGFPB-20SBSMT-N IS INTENDED FOR USE BY ARCHITECTS, AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES ANSIDATE Z21.97-2014 / 5053-030 REVISION 06/09/2016 SQUARE STAINLESS STEEL TFS BURNER SYSTEMS STANDARDS. NLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. FPB-20SBSMT-P #41 65,000 MAX. INLET 10.5" WC 13.0" CSAWC 2.41-2014 PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD. CADdetails.com LL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT SQUARE STAINLESS STEEL MT BURNER SYSTEMS 5053-022 REVISION DATE 06/23/2016 STANDARDS. FPB-26SBSMT-N 65,500 LPK#41 NORMAL INLET 7.0" WC 11.0" WC ANUFACTURER TO BE CONSIDERED ACCURATE. #29 PROTECTED BYAND COPYRIGHT ©2016 CADDETAILS.COM LTD. ONTRACTOR'S NOTE: FOR PRODUCT COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER 5053-030 REVISIONCADdetails.com DATE 06/09/2016 FPB-26SBSMT-P #41 65,000 EFERENCE NUMBER 5053-030.

BTU SPECS

GAS PRESSURE SQUARE BURNER SYSTEMS SQUARE BURNER SYSTEMS SQUARE BURNER SYSTEMS

PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD. FPB-32SBSMT-N #29 65,500

SQUARE BURNER #41 SYSTEMS 65,000

LPK#41

FPB-38SBSMT-N SQUARE STAINLESS STEEL MT#29 BURNER SYSTEMS 65,500

LPK#41

FPB-32SBSMT-P

FPB-38SBSMT-P

#41

-

65,000

PYRIGHT ©2016 CADDETAILS.COM LTD. This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

24

-

THESE FIRE PITS CADdetails.com DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0” WC FOR TESTED TO WC FOR LIQUID PROPANE NATURAL GASARE (NG) AND 11.0” ANSI Z21.97-2014 / FLEX LINE SIZE AND (LP) AT THE BURNER ORIFICE. CSASIZING 2.41-2014 PROPER GAS PIPE WILL ALSO AFFECT BTU’S. AS A RESULT YOURSTANDARDS. BTU’S MAY VARY SLIGHTLY FROM THE LISTED BTU SPECIFICATIONS. REVISION DATE 06/09/2016 CADdetails.com

This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

SQUARE OPTIONAL ACCESSORIES TFS OPTIONAL ACCESSORIES TM-R-AF1TX

Wireless wall mount timer (30/60/120min)

1001D-AF1TX

Wireless wall mount switch (On/Off)

1322WT

Wireless wall mount switch (On/Off/High/Low)

WS

Wired wall mount switch (On/Off)

AF-4000ADP24(80)

110 volts AC adapter, coverts to 7.5 DC volts for TFS systems

AF-4000HAT

Home/Pool automation transmitter system (works with most manufacturers systems)

LIDS

Stainless Steel lids with brushed finished

WINDSHIELDS

Tempered glass windshields

VENT-KIT-6X12

Includes two (2) 6” tall x 12” wide vents with mounting screws

TMS OPTIONAL ACCESSORIES LPK#41

Liquid Propane (LP) Conversion Kit. Converts fire pit from Natural Gas to LP Gas. Includes: Orifice/Air Shutter, rating plate label sticker and instructions. For use with FPB-20/26/32/38SBSMT-N, 65,000 Btu

MSI-BSTMS

Manual Spark Ignition Kit for FPB Series TMS Systems featuring the Burning Spur. Kit Includes: Spark Igniter Module, Ignition Hood, Ignition Hood Screen, Ignition Rain Shield, 2-Probe Spark Igniter, Burner Rain Shield and Bracket, Ignition wiring, AAA Battery

LIDS

Stainless Steel lids with brushed finished

WINDSHIELDS

Tempered glass windshields

VENT-KIT-6X12

Includes two (2) 6” tall x 12” wide vents with mounting screws

MT OPTIONAL ACCESSORIES LPK#41

Liquid Propane (LP) Conversion Kit. Converts fire pit from Natural Gas to LP Gas. Includes: Orifice/Air Shutter, rating plate label sticker and instructions. For use with FPB-20/26/32/38SBSMT-N, 65,000 Btu

MSI-BSMTI

Manual Spark Ignition Kit for FPB Series Match Throw Systems featuring the Burning Spur. Kit includes: Mounting Plate, Spark Igniter Module, Ignition Hood, Ignition Hood Screen, Ignition Rain Shield, 2-Probe Spark Igniter, Burner Rain Shield and Bracket, Ignition Wiring, AAA Battery

LIDS

Stainless Steel lids with brushed finished

WINDSHIELDS

Tempered glass windshields

VENT-KIT-6X12

Includes two (2) 6” tall x 12” wide vents with mounting screws

25

19"

TOLL FREE: 1-888-672-8929 www.firegearoutdoors.com FAX: (888) 672-8024 www.firegearoutdoors.com

69"

GAS TYPE NG

GAS TYPE LP

5.0" WC 10.5" WC 7.0" WC

10.5" WC 13.0" WC 11.0" WC

FLAT DISC BURNER SYSTEMS SELECT DESIRED SYSTEM:

NATURAL GAS: SYSTEM: LP GAS: SELECT DESIRED FPB-34DBSTFS-N NATURAL GAS: FPB-44DBSTFS-N FPB-34DBSTFS-N

DISC TFS SYSTEMSFPB-44DBSTFS-N

S. APPLICATION. THESE ARE NOT FIELD

H

LECT DESIRED SYSTEM:

A

GAS: FOR PLANNING LP GAS: NNATURAL PROFESSIONALS PURPOSES

F H

TOP VIEW

FPB-34DBSTFS-P FPB-34DBSTFS-N AND APPROVED BY THE PRODUCT FPB-44DBSTFS-N

SPECIFICATIONS A

FIREGEAR OUTDOORS FPB-34DBSTFS-P LP GAS: 9230 CONSERVATION AWAY FPB-44DBSTFS-P FORT WAYNE, IN 46809 FPB-34DBSTFS-P TOLL FREE: 1-888-672-8929 FPB-44DBSTFS-P FAX: (888) 672-8024 www.firegearoutdoors.com

TOP A VIEW B A B

FPB-44DBSTFS-P THESE FIRE PITS

DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0" WC FOR ARE TESTED TO NATURAL (NG) AND /11.0" WC FOR LIQUID PROPANE (LP) AT ANSIGAS Z21.97-2014 BTU LISTINGS ARE BASED 7.0" WC FOR THEDISCLAIMER: BURNER ORIFICE. FLEX LINE SIZE AND ON PROPER GAS PIPE CSA 2.41-2014 NATURAL GAS (NG) ANDBTU'S. 11.0" WC FOR LIQUIDYOUR PROPANE (LP) AT SIZING WILL ALSO AFFECT AS A RESULT BTU'S STANDARDS. THE BURNER ORIFICE. SIZE AND PROPER GAS PIPE MAY VARY SLIGHTLY FROMFLEX THELINE LISTED BTU SPECIFICATIONS. SIZING DATE WILL ALSO AFFECT BTU'S. AS A RESULT YOUR BTU'S REVISION 06/09/2016 MAY VARY SLIGHTLY FROM THE LISTED BTU SPECIFICATIONS.

G

BC

E G

C

F

D C FRONT VIEW H

D

F D CLEARANCE TO COMBUSTIBLES

FRONT VIEW CLEARANCE TO COMBUSTIBLES TOP VIEW CLEARANCE TO A CLEARANCE TO CLEARANCE TO A DIM. FROM BOTTOM MIN - MAX HEIGHT OUTSIDE COMBUSTIBLE FLOOR COMBUSTIBLE A COMBUSTIBLE OF DISC TO BOTTOM MODEL DIM. SPUR VIEW DIM.A OF SPUR CLEARANCE CLEARANCE TOPAN A TO DIM.APPLIANCE FROM BOTTOMG SIDEWALL TO A CLEARANCE FROM THE LIP OF THE CEILING OF MIN MAX HEIGHT OUTSIDE A B C COMBUSTIBLE FLOOR COMBUSTIBLE A COMBUSTIBLE CTO BOTTOM B OF DISC F G H D MODEL DIM. SPUR VIEW DIM. OF SPUR OF THE PAN TO ASIDEWALL CEILING OF10APPLIANCE CLEARANCEFROM TO ATHE18"LIPCLEARANCE A FPB-34DBSTFS-N 34" A 24" - DIM. 34" 1/4" 19"CLEARANCE TO69" B FROM1"BOTTOM C TU LISTINGS ARE BASED ON 7.0" WC FOR F G H D 18" 69" 34" 24" 34" 1" 19" FPB-34DBSTFS-P 10 1/4" OUTSIDE HEIGHT OF DISC TO BOTTOM COMBUSTABLE FLOOR COMBUSTABLE COMBUSTABLE NG) AND 11.0" WC FOR LIQUID PROPANE (LP) AT F FPB-34DBSTFS-N 44"34" - 34" 24"24" - 44" 1" 1" 18"18" 69"69" FPB-44DBSTFS-N 19"19" 10 10 1/4" D 1/4" DIM. 44"34" OF SPUR24"24" OF APPLIANCE RIFICE. FLEX LINE SIZE ANDFPB-44DBSTFS-P PROPER GAS PIPE - 34" FPB-34DBSTFS-P 10 19"19" CEILING 69"69" 10FROM 1/4"1/4" THE LIP OF PAN18"18" SIDEWALL - 44" 1" 1" O AFFECT BTU'S. AS MODEL A RESULT YOUR BTU'S A 44" B 24" - 44" 18" 69" FPB-44DBSTFS-N 19" 10 1/4" C 1" D E F HTLY FROM THE LISTED BTU SPECIFICATIONS. FPB-44DBSTFS-P 44" 24"FRONT - 44" VIEW 1" 18" 19" 69" 10 1/4" CLEARANCE TO COMBUSTIBLES BTU OUTPUT MODEL BTU BTU OUTPUT FPB-29DBSTFS-N 29” 1" 18" 69" PRESSURE 19"GAS TYPE NG GAS TYPE LP FACTORY ORFICE 10 1/4” ON LOW SPECIFICATIONS ON HIGH MODEL BTU BTU OUTPUT BTU OUTPUT 51,000 MIN. INLET 5.0" WC 10.5" FPB-34DBSTFS-N #7 105,000 CLEARANCE TO A CLEARANCE CLEARANCE TO A DIM. FROM FACTORY BOTTOM ORFICE PRESSURETO GAS TYPE NG GAS WC TYPE LP MIN - MAX FPB-34DBSTFS-P HEIGHT OUTSIDE SPECIFICATIONS ON HIGH ON LOW 49,500 INLET 19" 10.5" WC 13.0" #31 100,000 COMBUSTIBLE FLOOR COMBUSTIBLE AMAX. COMBUSTIBLE FPB-29DBSTFS-P 29”OF DISC TO 1”BOTTOM 10 1/4” 18" 69" WC #7 105,000 MIN.INLET INLET 10.5" 51,000 FPB-34DBSTFS-N DIM. SPUR VIEW DIM.FPB-44DBSTFS-N OF SPUR NORMAL 7.0"5.0" WCWC 11.0" WCWC SIDEWALL LIP100,000 OF THE PAN 51,000 CEILING OF APPLIANCE#7 #31FROM THE 105,000 49,500 MAX. INLET 10.5" WC 13.0" WC FPB-34DBSTFS-P 49,500 #31 100,000 A B FPB-44DBSTFS-P C F G H D 105,000 51,000 #7 NORMAL INLET 7.0" WC 11.0" WC FPB-44DBSTFS-N 10 1/4”18" 18" 69" 69" 19" S-N 34" FPB-34DBSTFS-N 24" - 34" 1" 34” 10 1" 1/4" 19" #31 100,000 49,500 FPB-44DBSTFS-P 69" 34" 24" - 34" 1" 19" 18" 10 1/4" S-P 44" 24" - 44" NOTES:1" 18" 69" 10 1/4" S-N 19" 1.

ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. 10 1/4”18" 18" 69" 101” 1/4" 44" FPB-34DBSTFS-P 24" - 44" 1" 34” 69" 19" S-P 19" CADdetails.com

2. NOTES: THESE FIRE PITS ARE SOLD AS NATURAL OR LP GAS MODELS. YOU MUST ORDER THE SPECIFIC MODEL PER THE APPLICATION. THESE ARE NOT FIELD 1.

ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. CONVERTIBLE. FIREREQUIRE PITS ARE18-SQUARE SOLD AS NATURAL ORCROSS LP GASFLOW MODELS. YOU MUSTPER ORDER SPECIFIC MODEL PER THE APPLICATION. THESE ARE NOT FIELD 3. 2.

ALLTHESE FIRE PITS INCHES OF VENTILATION SIDETHE OF ENCLOSURE. FPB-44DBSTFS-N 44” 1” 10 1/4” WHEN INSTALLING FIRE PITS 18".

19" 69" DEL BTU BTU OUTPUT BTU OUTPUT CONVERTIBLE. ADHERE TO YOUR STATE AND LOCAL CODES FACTORY ORFICE4. ALWAYS PRESSURE GAS TYPE NG GAS TYPE LP IFICATIONS ONFIRE HIGH ON18-SQUARE LOW INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. ALL PITSTO REQUIRE 5. 3.

DRAWINGS NOT SCALE. 4DBSTFS-N #7 105,000 51,000 MIN.ENGINEERS, INLETINSTALLING 5.0"FIRE WCPITSCONSULTANTS 10.5" WC ALWAYS ADHERE TO YOUR STATE LOCAL CODES WHEN .

6. 4.

THIS DRAWING IS INTENDED FOR USEAND

BY ARCHITECTS, CONTRACTORS, AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES 44” 1” 10 CONSTRUCTION. 1/4”MAX. INLET 18" 19" 69" #31 100,000 49,500 10.5" WC 13.0" WC 4DBSTFS-P FPB-44DBSTFS-P 5.

DRAWINGS NOT TOMAY SCALE. ONLY. THIS DRAWING NOT BE USED FOR 105,000 51,000 4DBSTFS-N #7 NORMAL INLET 7.0" WC 11.0"BEWC DRAWING IS INTENDED FOR USE

BY CURRENT ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN FOR PLANNING PURPOSES 7. 6.

ALLTHIS INFORMATION CONTAINED HEREIN WAS AT THE TIME OF DEVELOPMENT BUT MUST REVIEWED AND PROFESSIONALS APPROVED BY THE PRODUCT ONLY. THIS DRAWING MAY NOT BE ACCURATE. USED FOR #31 100,000 49,500 4DBSTFS-P 2-inch minimum MANUFACTURER TOrequired BE CONSIDERED overlap per side to secure discCONSTRUCTION. ALL INFORMATION HEREIN CURRENT AT THE TIME OFwww.CADdetails.com/info DEVELOPMENT BUT MUST REVIEWED AND APPROVED BY THE PRODUCT 8. 7.

CONTRACTOR'S NOTE:CONTAINED FOR PRODUCT AND WAS COMPANY INFORMATION VISIT ANDBE ENTER MANUFACTURER BE CONSIDERED ACCURATE. REFERENCE NUMBERTO 5053-034.

THESE FIRE PITS 8. CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER ARE TESTED TO 5053-034.

BTU OUTPUT BTU OUTPUT FIRE PIT INSTALLATIONS SHOULD PROVIDEREFERENCE ACCESS TONUMBER THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS.

BTU SPECS

GAS PRESSURE FLAT DISCONSPECIFIC BURNER SYSTEMS FACTORY ORIFICE GAS TYPE NG SE FIRE PITS ARE SOLDMODEL AS NATURAL OR LP GAS MODELS. YOU MUST ORDER THE THELOW APPLICATION. THESE PRESSURE ARE NOT FIELD HIGH MODEL PERON NVERTIBLE. FLAT DISC ENCLOSURE. BURNER DISC STAINLESS TFS BURNER SYSTEMS SYSTEMS FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOWFLAT VENTILATION PER SIDE OFSTEEL

THESE FIRE GAS TYPE LP PITS ANSI Z21.97-2014 /

ARE2.41-2014 TESTED TO CSA ANSI Z21.97-2014 / STANDARDS. 10.5" CSAWC 2.41-2014 REVISION DATE 06/09/2016 STANDARDS. 13.0" WC CADdetails.com REVISION 11.0"DATE WC 06/09/2016 CADdetails.com

51,000 MIN. INLET 5.0" WC AYS ADHERE TOFPB-29DBSTFS-N YOUR STATE AND LOCAL CODES WHEN#7 INSTALLING FIRE PITS .105,000 FLAT DISC STAINLESS STEEL TFS BURNER SYSTEMS 5053-034 WINGS NOT TO SCALE. FPB-29DBSTFS-P #31 100,000 49,500 MAX. INLET 10.5" WC S DRAWING IS INTENDED FOR USE BY CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES PROTECTED BYARCHITECTS, COPYRIGHTENGINEERS, ©2016 CADDETAILS.COM LTD. FPB-34DBSTFS-N #7 105,000 51,000 NORMAL INLET 7.0" WC Y. THIS DRAWING MAY 5053-034 NOT BE USED FOR CONSTRUCTION. INFORMATION CONTAINED HEREIN WAS AT THE©2016 TIME OF DEVELOPMENT BUTLTD. MUST BE REVIEWED AND APPROVED BY THE PRODUCT PROTECTED BYCURRENT COPYRIGHT CADDETAILS.COM FPB-34DBSTFS-P #31 100,000 49,500 UFACTURER TO BE CONSIDERED ACCURATE. TRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0” WC FOR FPB-44DBSTFS-N #7 105,000 AND ENTER51,000 ERENCE NUMBER 5053-034.

NATURAL GAS (NG) AND 11.0” WC FOR LIQUID PROPANE FPB-44DBSTFS-P

#31

100,000

FLAT DISC BURNER SYSTEMS FLAT DISC STAINLESS STEEL TFS BURNER SYSTEMS

49,500

THESE FIRE PITS (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND ARE TESTED TO PROPER GASANSI PIPEZ21.97-2014 SIZING WILL ALSO AFFECT BTU’S. AS / A RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE CSA 2.41-2014 LISTED BTU SPECIFICATIONS. STANDARDS. REVISION DATE 06/09/2016

YRIGHT ©2016 CADDETAILS.COM LTD.

26

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

CADdetails.com

19"

www.firegearoutdoors.com TOLL FREE: 1-888-672-8929 FAX: (888) 672-8024 www.firegearoutdoors.com

69"

GAS TYPE NG

GAS TYPE LP

5.0" WC 10.5" WC 7.0" WC

10.5" WC 13.0" WC 11.0" WC

SELECT DESIRED SYSTEM: LP GAS: NATURAL GAS: FIREGEAR OUTDOORS A SELECT DESIRED SYSTEM: 9230 CONSERVATION WAY FPB-34DBSTMS-N FPB-34DBSTMS-P NATURAL GAS: LP GAS: FORT WAYNE, IN 46809 FPB-44DBSTMS-N FPB-44DBSTMS-P A FPB-34DBSTMS-P FPB-34DBSTMS-N TOLL FREE: 1-888-672-8929

DISC TMS SYSTEMSFPB-44DBSTMS-N

FAX: (888) 672-8024 www.firegearoutdoors.com

FPB-44DBSTMS-P

S. APPLICATION. THESE ARE NOT FIELD

LECT DESIRED SYSTEM:

NATURAL GAS:

H LP GAS:

A

N PROFESSIONALS FOR PLANNING PURPOSES FPB-34DBSTMS-N FPB-34DBSTMS-P

F H

TOP VIEW

FPB-44DBSTMS-N FPB-44DBSTMS-P AND APPROVED BY THE PRODUCT

TOP A VIEW B

DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0" WC FOR THESE FIRE PITS NATURAL (NG) AND AREGAS TESTED TO 11.0" WC FOR LIQUID PROPANE (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE ANSI Z21.97-2014 / DISCLAIMER: BTU LISTINGS AREASBASED ON 7.0" WCBTU'S FOR SIZING WILL 2.41-2014 ALSO AFFECT BTU'S. A RESULT YOUR CSA NATURAL GAS (NG)FROM AND 11.0" FORBTU LIQUID PROPANE (LP) AT MAY VARY SLIGHTLY THE WC LISTED SPECIFICATIONS. STANDARDS. THE BURNER ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING DATE WILL ALSO AFFECT BTU'S. AS A RESULT YOUR BTU'S REVISION 06/09/2016 MAY VARY SLIGHTLY FROM THE LISTED BTU SPECIFICATIONS.

A B H FRONT VIEW

G E G

C B C D

C

F

F CLEARANCE TO COMBUSTIBLES D

D

CLEARANCE COMBUSTIBLES VIEW CLEARANCE TO A TOCLEARANCE CLEARANCE TO A TO DIM. FROM BOTTOM FRONT CADdetails.com MIN - MAX HEIGHT OUTSIDE TOP VIEW COMBUSTIBLE A COMBUSTIBLE OF DISC TO BOTTOM COMBUSTIBLE FLOOR MODEL DIM. SPUR VIEW DIM. OF SPUR SIDEWALL CEILING OF APPLIANCE GFROM THE LIP OF THE PAN A B C CLEARANCE TO A CLEARANCE CLEARANCE TO A TO DIM. FROM F G H D BOTTOM MIN - MAXA HEIGHT OUTSIDE FLOOR COMBUSTIBLE A COMBUSTIBLE OF DISC TO BOTTOM COMBUSTIBLE 34" 24" 34" 1" 3 7/8" 19" 18" 69" TU LISTINGS ARE BASED ONFPB-34DBSTMS-N 7.0" WCMODEL FOR DIM. SPUR VIEW DIM. OF SPUR C CLEARANCEFROM B LIP OF THE PAN TO ASIDEWALL OF3APPLIANCE 34" A 24" -DIM. 34" 19"CLEARANCE TOCEILING 69" FPB-34DBSTMS-P 7/8" TO ATHE18" CLEARANCE A F NG) AND 11.0" WC FOR LIQUID PROPANE (LP) AT B FROM1"BOTTOM C 44" 24" 44" 1" 18" F 69"H D FPB-44DBSTMS-N 19"G 3 7/8" RIFICE. FLEX LINE SIZE AND PROPER GASOUTSIDE PIPE HEIGHT OF DISC TO BOTTOM COMBUSTABLE FLOOR COMBUSTABLE COMBUSTABLE FPB-34DBSTMS-N 34" - 34" 3 7/8" 24"24" - 44" 1" 1" 18"18" 69"69" FPB-44DBSTMS-P 19"19" 3 7/8" D O AFFECT BTU'S. AS A RESULT YOUR BTU'SDIM. 44"OF SPUR OF APPLIANCE FROM 69" 34" 24" - 34" 1" 19" CEILING 3 7/8" THE LIP OF PAN 18" SIDEWALL FPB-34DBSTMS-P HTLY FROM THE LISTED BTU SPECIFICATIONS. TO COMBUSTIBLES 44" B 24"FRONT - 44" VIEW 18" 69" 3 7/8" CLEARANCE 19" MODELFPB-44DBSTMS-N A C 1" D E F 3 7/8" FPB-44DBSTMS-P 19" 44" 24" - 44" 1" 18" 69"

S-N S-P S-N S-P

FPB-29DBSTMS-N MODEL 29”BTU 1" 3 7/8” 18" TO A CLEARANCE19" 69" CLEARANCE TO A CONVERSION DIM. FROM BOTTOMORFICECLEARANCE FACTORY BTU OUTPUT PRESSURE TOGAS TYPE NG GAS TYPE LP MIN - MAX SPECIFICATIONS HEIGHT OUTSIDE KIT PART NO. COMBUSTIBLE A COMBUSTIBLE OF DISC TO BOTTOM COMBUSTIBLE FLOOR #29 65,500 LPK#41 MIN. INLET 5.0" WC 10.5" WC DIM. SPUR VIEW DIM.FPB-34DBSTMS-N OF SPUR SIDEWALL FROM3THE LIP OF THE PAN CONVERSION CEILING OF APPLIANCE MODEL BTU FPB-29DBSTMS-P 29” 1” 7/8” 18" #41 65,000 MAX. INLET 19" GAS 10.5"TYPE WC NG 69" 13.0"TYPE WC LP FPB-34DBSTMS-P A B C PRESSURE GAS FACTORY ORFICE BTU OUTPUT F KIT PARTGNO. SPECIFICATIONS D 65,500 #29 FPB-44DBSTMS-N NORMAL HINLET 7.0" WC 11.0" WC LPK#41 18"65,500 34" 24" - 34" 1" 3 7/8" #41 19" FPB-34DBSTMS-N LPK#41 MIN.69" INLET 5.0" WC 10.5" WC #29 65,000 FPB-44DBSTMS-P 34" FPB-34DBSTMS-N 24" - 34" 1" 34” 19" 3 7/8" MAX.69" INLET 10.5" WC #41 1" 3 7/8”18"65,000 18" 19" 69"13.0" WC FPB-34DBSTMS-P 44" 24" - 44" 1" 18" 69" 19" 3 7/8" 65,500 FPB-44DBSTMS-N LPK#41 NORMAL INLET 7.0" WC 11.0" WC #29 19" 44" 24" - 44" NOTES: 1" 18"65,000 69" 3 7/8" #41 FPB-44DBSTMS-P 1. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. FPB-34DBSTMS-P 34” 1” 3 7/8” 18" 19" 69" 2. THESE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE CONVERTED TO LP GAS. 3. NOTES: ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. 4. 1.ALWAYS ADHERE TO YOUR STATESHOULD AND LOCAL CODES WHEN INSTALLING FIRE PITS . AS WELL AS GAS CONNECTIONS. ALL FIRE PIT INSTALLATIONS PROVIDE ACCESS TO THE VALVE SYSTEMS

FPB-44DBSTMS-N 44”FIRE 1” ARE SHIPPED 3 18" 19" 69" CONVERSION DEL BTU NOTPIT TO MODELS SCALE. THESE AS7/8” NATURAL GAS AND MUST BE CONVERTED LP GAS. PRESSURE GAS TYPE NG TOGAS TYPE LP FACTORY ORFICE5. 2.DRAWINGS BTU OUTPUT 6. 3.THIS INTENDED FOR NO. USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES KIT PART IFICATIONS ALLDRAWING FIRE PITSISREQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. THIS ADHERE DRAWINGTOMAY NOTSTATE BE USED CONSTRUCTION. LPK#41 MIN. WHEN INLETINSTALLING 5.0"FIRE WCPITS .

10.5" WC #29 65,500 4DBSTMS-N 4.ONLY. ALWAYS YOUR ANDFOR LOCAL CODES 44” NOT CONTAINED 7/8”MAX. 18" 19"AND APPROVED BY THE PRODUCT 69" 7. 5.ALLDRAWINGS INFORMATION ATINLET THE TIME OF DEVELOPMENT BUT MUST 10.5" WC 13.0"BE WCREVIEWED #41 65,000 TO 1” SCALE. HEREIN WAS3CURRENT 4DBSTMS-P FPB-44DBSTMS-P BE CONSIDERED ACCURATE. 6.MANUFACTURER THIS DRAWINGTO IS INTENDED FOR USE

BY ARCHITECTS, CONTRACTORS, CONSULTANTS 65,500 NORMALENGINEERS, INLET 7.0" WC 11.0" WC AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES #29 4DBSTMS-N LPK#41 8. CONTRACTOR'S NOTE: FOR AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER ONLY. THIS DRAWING MAYPRODUCT NOT BE USED FOR CONSTRUCTION. #41 65,000 4DBSTMS-P2-inch minimum overlap per side required to secure disc NUMBERCONTAINED 5053-036. HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT 7.REFERENCE ALL INFORMATION THESE FIRE PITS MANUFACTURER TO BE CONSIDERED ACCURATE. ARE TESTED TO 8. CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER FIRE PIT INSTALLATIONS SHOULD PROVIDEREFERENCE ACCESS TONUMBER THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. ANSI Z21.97-2014 / 5053-036.

CONVERSION THESE FIRE SE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE CONVERTED TOOUTPUT LP GAS. MODEL FACTORY ORIFICE BTU PRESSURE GAS TYPE NG GASCSA TYPE LP PITS 2.41-2014 KIT PART NO. ARE TESTED FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOWFLAT VENTILATION PER SIDE OFSTEEL ENCLOSURE. DISC STAINLESS TMS BURNER SYSTEMS STANDARDS. TO AYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS .

ANSI Z21.97-2014 / WINGS NOT TO SCALE. 5053-036 REVISION DATE 05/25/2016 FPB-29DBSTMS-N #29 65,500 LPK#41 MIN. INLET 5.0" WC 10.5" WC CSA 2.41-2014 S DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS ANDBURNER DESIGN PROFESSIONALS FOR PLANNING PURPOSES FLAT DISC STAINLESS STEEL TMS SYSTEMS STANDARDS. PROTECTED BYFOR COPYRIGHT ©2016 LTD. FPB-29DBSTMS-N #41 CADDETAILS.COM65,500 MAX. INLET 10.5" WC 13.0"CADdetails.com WC Y. THIS DRAWING MAY NOT BE USED CONSTRUCTION.

BTU SPECS

GAS PRESSURE FLAT DISC BURNER SYSTEMS

FLAT DISC BURNER SYSTEMS

INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT 5053-036 #29 65,500 LPK#41 NORMAL INLET UFACTURER TO FPB-34DBSTMS-N BE CONSIDERED ACCURATE. PROTECTED COPYRIGHT ©2016 CADDETAILS.COM LTD. AND ENTER TRACTOR'S NOTE: FOR PRODUCT ANDBY COMPANY INFORMATION FPB-34DBSTMS-P #41 VISIT www.CADdetails.com/info 65,000 ERENCE NUMBER 5053-036.

FPB-44DBSTMS-N

#29

65,500

FPB-44DBSTMS-P FLAT DISC BURNER#41SYSTEMS65,000

FLAT DISC STAINLESS STEEL TMS BURNER SYSTEMS

YRIGHT ©2016 CADDETAILS.COM LTD. This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

LPK#41 -

7.0" WC

REVISION 11.0" DATE WC 05/25/2016 CADdetails.com

FIRE PITS ARE BASED ON 7.0” WC FOR DISCLAIMER: THESE BTU LISTINGS ARE TESTED NATURAL GAS (NG) ANDTO 11.0” WC FOR LIQUID PROPANE ANSI Z21.97-2014 / FLEX LINE SIZE AND (LP) AT THE BURNER ORIFICE. CSA SIZING 2.41-2014WILL ALSO AFFECT BTU’S. AS PROPER GAS PIPE A RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE STANDARDS. LISTED BTU SPECIFICATIONS. REVISION DATE 05/25/2016 CADdetails.com

This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

27

NATURAL GAS: FPB-44DBSMT-N FPB-34DBSMT-N

DISC MT SYSTEMS

FPB-44DBSMT-N

LP GAS: FORT WAYNE, IN 46809 FPB-44DBSMT-P A FPB-34DBSMT-P TOLL FREE: 1-888-672-8929

FAX: (888) 672-8024 www.firegearoutdoors.com

FPB-44DBSMT-P

S. APPLICATION. THESE ARE NOT FIELD

LECT DESIRED SYSTEM:

NATURAL GAS:

H LP GAS:

A

N PROFESSIONALS FOR PLANNING PURPOSES FPB-34DBSMT-N FPB-34DBSMT-P

H F TOP VIEW

FPB-44DBSMT-N FPB-44DBSMT-P AND APPROVED BY THE PRODUCT

TOP A VIEW B

DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0" WC FOR THESE FIRE PITS NATURAL (NG) AND AREGAS TESTED TO 11.0" WC FOR LIQUID PROPANE (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE ANSI Z21.97-2014 / DISCLAIMER: BTU LISTINGS AREASBASED ON 7.0" WCBTU'S FOR SIZING WILL 2.41-2014 ALSO AFFECT BTU'S. A RESULT YOUR CSA NATURAL GAS (NG)FROM AND 11.0" FORBTU LIQUID PROPANE (LP) AT MAY VARY SLIGHTLY THE WC LISTED SPECIFICATIONS. STANDARDS. THE BURNER ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING DATE WILL ALSO AFFECT BTU'S. AS A RESULT YOUR BTU'S REVISION 06/09/2016 MAY VARY SLIGHTLY FROM THE LISTED BTU SPECIFICATIONS.

A B H FRONT VIEW

G CB

G E

CC D

F

F CLEARANCE TO COMBUSTIBLES D

D

CLEARANCE COMBUSTIBLES VIEW CLEARANCE TO A TOCLEARANCE CLEARANCE TO A TO DIM. FROM BOTTOM FRONT CADdetails.com MIN - MAX HEIGHT OUTSIDE TOP VIEW COMBUSTIBLE A COMBUSTIBLE OF DISC TO BOTTOM COMBUSTIBLE FLOOR MODEL DIM. SPUR VIEW DIM. OF SPUR SIDEWALL CEILING OF APPLIANCE GFROM THE LIP OF THE PAN A B C CLEARANCE TO A CLEARANCE CLEARANCE TO A TO DIM. FROM F G H D BOTTOM MIN - MAXA HEIGHT OUTSIDE FLOOR COMBUSTIBLE A COMBUSTIBLE TO BOTTOM COMBUSTIBLE 34" 24" -VIEW 34" DIM. OF 1" SPUR OF DISC 3 7/8" 19" 18" 69" TU LISTINGS ARE BASED ONFPB-34DBSMT-N 7.0" WCMODEL FOR DIM. SPUR C B SIDEWALL FROM LIP OF THE PAN OF3APPLIANCE 34" A 24"DIM. - 34" 1" 69" FPB-34DBSMT-P 7/8" CLEARANCE TO A THE18" CLEARANCE CLEARANCE TO CEILING A F TO A 19" NG) AND 11.0" WC FOR LIQUID PROPANE (LP) AT B FROM BOTTOM C G 44" 24" 44" 1" 18" F 69"H D FPB-44DBSMT-N 3 7/8" 19"COMBUSTABLE RIFICE. FLEX LINE SIZE AND PROPER GAS PIPE OUTSIDE HEIGHT OF DISC TO BOTCOMBUSTABLE FLOOR COMBUSTABLE FPB-34DBSMT-N - 34" 3 7/8" 44"34" 24"24" - 44" 1" 1" 18"18" 69"69" FPB-44DBSMT-P 3 7/8" 19"19" D O AFFECT BTU'S. AS A RESULT YOUR BTU'S DIM. OF TOM FROM 69" 18"SIDEWALL 34" SPUR 24" - 34"OF APPLIANCE 1" 19" CEILING 3 7/8"THE LIP OF PAN FPB-34DBSMT-P HTLY FROM THE LISTED BTU SPECIFICATIONS. TO COMBUSTIBLES 44" B 24"FRONT - 44" VIEW 18" 69" 3 7/8" CLEARANCE 19" MODEL FPB-44DBSMT-N A C 1" D E F 3 7/8" FPB-44DBSMT-P 19" 44" 24" - 44" 1" 18" 69"

T-N T-P T-N T-P

FPB-29DBSMT-N MODEL 29” BTU 1" 7/8” 18" 19" 69" CLEARANCE TO A CLEARANCE TO A CONVERSION DIM. FROM BOTTOMORFICE3CLEARANCE FACTORY BTU OUTPUT PRESSURE TOGAS TYPE NG GAS TYPE LP MIN - MAX SPECIFICATIONS HEIGHT OUTSIDE KIT PART NO. COMBUSTIBLE A COMBUSTIBLE OF DISC TO BOTTOM COMBUSTIBLE FLOOR #29 65,500 LPK#41 MIN. INLET 5.0" WC 10.5" WC DIM. SPUR VIEW DIM. FPB-34DBSMT-N OF SPUR SIDEWALL FROM THE LIP OF THE PAN CONVERSION CEILING OF APPLIANCE MODEL BTU FPB-29DBSMT-P 29” 1” 3 7/8” 18" 19" #41 65,000 MAX. INLET 10.5"TYPE WC NG 69" 13.0"TYPE WC LP FPB-34DBSMT-P A B C PRESSURE GAS GAS FACTORY ORFICE BTU OUTPUT F KIT PARTGNO. SPECIFICATIONS D 65,500 #29 FPB-44DBSMT-N LPK#41 NORMAL HINLET 7.0" WC 11.0" WC 18"65,500 34" 24" - 34" 1" 3 7/8" #41 19" FPB-34DBSMT-N LPK#41 MIN.69" INLET 5.0" WC 10.5" WC #29 65,000 FPB-44DBSMT-P 34" FPB-34DBSMT-N 24" - 34" 1"34” 3 1" 7/8" MAX.69" INLET 10.5" WC #41 3 7/8” 18"65,000 18"19" 19" 69"13.0" WC FPB-34DBSMT-P 44" 24" - 44" 1" 18" 69" 19" 3 7/8" 65,500 FPB-44DBSMT-N LPK#41 #29 NORMAL INLET 7.0" WC 11.0" WC 19" 44" 24" - 44" NOTES: 1" 18"65,000 69" 3 7/8" #41 FPB-44DBSMT-P 1. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. FPB-34DBSMT-P2. THESE 34” 1” 3 7/8” 18" 19" 69" FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE CONVERTED TO LP GAS. 3. NOTES: ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. 4. 1.ALWAYS ADHERE TO YOUR STATESHOULD AND LOCAL CODES WHEN INSTALLING FIRE PITS . AS WELL AS GAS CONNECTIONS. ALL FIRE PIT INSTALLATIONS PROVIDE ACCESS TO THE VALVE SYSTEMS

FPB-44DBSMT-N5. 2.DRAWINGS 44” FIRE 1” 7/8” 18" 19" 69" CONVERSION DEL BTU NOTPIT TO MODELS SCALE. THESE ARE SHIPPED3AS NATURAL GAS AND MUST BE CONVERTED LP GAS. PRESSURE GAS TYPE NG TOGAS TYPE LP FACTORY ORFICE BTU OUTPUT 6. 3.THIS INTENDED FOR NO. USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES KIT PART IFICATIONS ALLDRAWING FIRE PITSISREQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. THIS ADHERE DRAWINGTOMAY NOTSTATE BE USED CONSTRUCTION. LPK#41 MIN. WHEN INLETINSTALLING 5.0"FIRE WCPITS .

10.5" WC #29 65,500 34DBSMT-N 4.ONLY. ALWAYS YOUR ANDFOR LOCAL CODES 44” 3 7/8” 19" AND APPROVED BY THE 69" 7. 5.ALLDRAWINGS INFORMATION CURRENT ATINLET THE TIME OF DEVELOPMENT BUT MUST PRODUCT MAX. 10.5"18" WC 13.0"BE WCREVIEWED #41 65,000 NOT CONTAINED TO1” SCALE. HEREIN WAS 34DBSMT-P FPB-44DBSMT-P BE CONSIDERED ACCURATE. 6.MANUFACTURER THIS DRAWINGTO IS INTENDED FOR USE

BY ARCHITECTS, CONTRACTORS, CONSULTANTS 65,500 NORMALENGINEERS, INLET 7.0" WC 11.0" WC AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES #29 44DBSMT-N LPK#41 8. CONTRACTOR'S NOTE: FOR AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER ONLY. THIS DRAWING MAYPRODUCT NOT BE USED FOR CONSTRUCTION. #41 65,000 44DBSMT-P 2-inch minimum overlap per side required to secure disc NUMBERCONTAINED 5053-039. HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT 7.REFERENCE ALL INFORMATION THESE FIRE PITS MANUFACTURER TO BE CONSIDERED ACCURATE. ARE TESTED TO 8. CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER FIRE PIT INSTALLATIONS SHOULD PROVIDEREFERENCE ACCESS TONUMBER THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. ANSI Z21.97-2014 / 5053-039.

THESE FIRE PITS SE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE CONVERTED TO LP GAS. CSA 2.41-2014 ARE TESTED FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOWFLAT VENTILATION PER SIDE OFSTEEL ENCLOSURE. DISC STAINLESS MT BURNER SYSTEMS STANDARDS. TO AYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS .

ANSI Z21.97-2014 / CONVERSION MODEL FACTORY ORIFICE BTU OUTPUT PRESSURE GAS TYPE NG REVISION GAS TYPE LP WINGS NOT TO SCALE. 5053-039 DATE 05/25/2016 CSA 2.41-2014 KIT PART NO. S DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES FLAT DISC STAINLESS STEEL MT BURNER SYSTEMS STANDARDS. PROTECTED BYFOR COPYRIGHT ©2016 CADDETAILS.COM LTD. CADdetails.com Y. THIS DRAWING MAY NOT BE USED CONSTRUCTION. FPB-29DBSMT-N #29TIME OF DEVELOPMENT 65,500 LPK#41 MIN. INLET 5.0" WC 10.5"DATE WC 05/25/2016 INFORMATION CONTAINED HEREIN WAS CURRENT AT THE BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT 5053-039 REVISION

BTU SPECS

FLAT DISC BURNER SYSTEMS GAS PRESSURE FLAT DISC BURNER SYSTEMS

UFACTURER TO BE CONSIDERED ACCURATE. FPB-29DBSMT-P #41 65,000 PROTECTED COPYRIGHT ©2016 VISIT CADDETAILS.COM LTD. AND ENTER TRACTOR'S NOTE: FOR PRODUCT ANDBY COMPANY INFORMATION www.CADdetails.com/info ERENCE NUMBERFPB-34DBSMT-N 5053-039. #29 65,500 LPK#41

FPB-34DBSMT-P FLAT DISC BURNER#41 SYSTEMS65,000 FPB-44DBSMT-N #29 65,500

FLATFPB-44DBSMT-P DISC STAINLESS STEEL MT BURNER #41 SYSTEMS

65,000

YRIGHT ©2016 CADDETAILS.COM LTD.

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

28

LPK#41 -

MAX. INLET

10.5" WC

NORMAL INLET 7.0" WC THESE FIRE PITS

13.0" WC CADdetails.com 11.0" WC

ARE TESTED TO ANSI DISCLAIMER: BTUZ21.97-2014 LISTINGS/ ARE BASED ON 7.0” WC FOR 2.41-2014 NATURAL GASCSA (NG) AND 11.0” WC FOR LIQUID PROPANE STANDARDS. (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND PROPERREVISION GAS PIPE SIZING WILL ALSO AFFECT BTU’S. AS DATE 05/25/2016 A RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE CADdetails.com LISTED BTU SPECIFICATIONS.

This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

FLAT DISC OPTIONAL ACCESSORIES TFS OPTIONAL ACCESSORIES TM-R-AF1TX

Wireless wall mount timer (30/60/120min)

1001D-AF1TX

Wireless wall mount switch (On/Off)

1322WT

Wireless wall mount switch (On/Off/High/Low)

WS

Wired wall mount switch (On/Off)

AF-4000ADP24(80)

110 volts AC adapter, coverts to 7.5 DC volts for TFS systems

AF-4000HAT

Home/Pool automation transmitter system (works with most manufacturers systems)

VENT-KIT-6X12

Includes two (2) 6” tall x 12” wide vents with mounting screws

TMS OPTIONAL ACCESSORIES LPK#41

Liquid Propane (LP) Conversion Kit. Converts fire pit from Natural Gas to LP Gas. Includes: Orifice/Air Shutter, rating plate label sticker and instructions. For use with FPB-29,34,44DBSTMS-N, 65,000 Btu

MSI-BSTMS

Manual Spark Ignition Kit for FPB Series TMS Systems featuring the Burning Spur. Kit. Includes: Spark Igniter Module, Ignition Hood, Ignition Hood Screen, Ignition Rain Shield, 2-Probe Spark Igniter, Burner Rain Shield and Bracket, Ignition wiring, AAA Battery

VENT-KIT-6X12

Includes two (2) 6” tall x 12” wide vents with mounting screws

MT OPTIONAL ACCESSORIES LPK#41

Liquid Propane (LP) Conversion Kit. Converts fire pit from Natural Gas to LP Gas. Includes: Orifice/Air Shutter, rating plate label sticker and instructions. For use with FPB-29,34/44DBSMT-N, 65,000 Btu

MSI-BSMTI

Manual Spark Ignition Kit for FPB Series Match Throw Systems featuring the Burning Spur. Kit includes: Mounting Plate, Spark Igniter Module, Ignition Hood, Ignition Hood Screen, Ignition Rain Shield, 2-Probe Spark Igniter, Burner Rain Shield and Bracket, Ignition Wiring, AAA Battery

VENT-KIT-6X12

Includes two (2) 6” tall x 12” wide vents with mounting screws

29

SELECT DESIRED SYSTEM:

PLICATION. THESE ARE NOT FIELD

C A

L SERIES BURNER SYSTEMS NATURAL GAS:

FPB-L24TFS-N

SELECT DESIRED SYSTEM: FPB-L30TFS-N

C A

ROFESSIONALS FOR PLANNING PURPOSES

NATURALFPB-L36TFS-N GAS:

D APPROVED BY THE PRODUCT

FPB-L24TFS-N LP GAS:

L SERIES TFS SYSTEMS FPB-L30TFS-N FPB-L24TFS-P

ED SYSTEM:

AS:

TOLL FREE: 1-888-672-8929 FAX: (888) 672-8024 www.firegearoutdoors.com

SPECIFICATIONS B D

FIREGEAR OUTDOORS 2" TYP. 9230 CONSERVATION WAY 23" TYP. FORT WAYNE, IN 46809 B D TOP VIEW TOLL FREE: 1-888-672-8929 2" TYP. FAX: (888) 672-8024 E 23" TYP. www.firegearoutdoors.com

THESEFPB-L36TFS-N FIRE PITS FPB-L30TFS-P ARE TESTED TO GAS: FPB-L36TFS-P ANSILPZ21.97-2014 / CSA FPB-L24TFS-P 2.41-2014 STANDARDS. FPB-L30TFS-P REVISION DATE 06/09/2016 FPB-L36TFS-P CADdetails.com C LISTINGS ARE BASED ON 7.0" WC DISCLAIMER: BTU A (NG) AND 11.0" WC FOR LIQUID FOR NATURAL GAS

44" CEILING F

TOP VIEW E

F 6 1/4"

G

17" SIDEWALL 44" CEILING

H17" SIDEWALL

15" FLOOR TO BOTTOM OF CRADLE

G PROPANE (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO AFFECT 8 1/2" 5 3/4" H BTU'S. AS A RESULT YOUR BTU'S MAY VARY SLIGHTLY 15" FLOOR SIDE VIEW END VIEW CLEARANCE TO COMBUSTIBLES DISCLAIMER: ARE BASED ON 7.0" WC FROM BTU THE LISTINGS LISTED BTU SPECIFICATIONS. B D TO BOTTOM 6 1/4" FOR NATURAL GAS (NG) AND 11.0" WC FOR LIQUID OF CRADLE MIN/MAX MIN/MAX PROPANE (LP) AT THE BURNER ORIFICE. FLEX LINE PAN OVERALL LENGTH OVERALL WIDTH INSIDE PAN INSIDE PAN OVERALL HEIGHT 2" TYP. CUT OUT CUT OUT SIZE AND PROPER GAS PIPE SIZING WILL ALSO AFFECT 5 3/4" DEPTH MODEL OF CRADLE OF CRADLE 8 1/2" LENGTH WIDTH OF APPLIANCE 23" TYP. BTU'S. AS A RESULT YOUR BTU'S MAY VARY SLIGHTLY LENGTH LENGTH SIDE VIEW ENDEVIEW CLEARANCE TOG COMBUSTIBLES A B F H 44" CEILING FROM THE LISTED BTU C D TOPSPECIFICATIONS. VIEW

FS-N

FS-N

FS-N

FS-P

FS-P

6 7/8" 28 1/2" 7 1/8" 24" 6 3/8" 4 1/4" 12 3/4" FPB-L24TFS-N 28 1/4" MIN/MAX 7 1/8" FPB-L24TFS-P 28 1/4"OVERALL WIDTH 6 7/8" MIN/MAX28 1/2" 1/4" 12 3/4" OVERALL LENGTH INSIDE PAN 24" INSIDE PAN6 3/8" PAN 4 OVERALL HEIGHT CUT 17"OUT 7 1/8" LENGTH 30" WIDTH 6 3/8"DEPTH 4 1/4" FPB-L30TFS-N 34 1/4" OF CRADLE6 7/8"F CUT OUT34 1/2" 12 3/4" EOF CRADLE MODEL OF APPLIANCE LENGTH 34 SIDEWALL LENGTH 7 1/8" 30" FPB-L30TFS-P 34 1/4" 6 7/8" 1/2" 6 3/8" 4 1/4" A B E F G H 12 3/4" 36" FPB-L36TFS-N 40 1/4" 6 7/8" 7 1/8" 6 3/8" 4 1/4" 12 3/4" CG 40 1/2" D FPB-L24TFS-N 6 7/8" 6 7/8" 28 1/2" 40 1/2"7 1/8" 7 1/8" 24" 6 3/8" 6 3/8" 4 1/4" 4 1/4" 12 3/4" 12 3/4" FPB-L36TFS-P 28 1/4" 40 1/4" 36" FPB-L24TFS-POVERALL28 1/4" OVERALL 6 7/8" MIN/MAX 28 1/2" MIN/MAX 7 1/8" 24" 6 3/8" 4 1/4" 12 3/4" OVERALL CONVERSION KIT30" FPB-L30TFS-N MODEL BTU 34 1/4" 6 7/8" 34 1/2"H 7 1/8" 6 3/8" 4 1/4" 12 3/4" 15" FLOOR FACTORY OUTPUT PRESSURE PAN GAS TYPE NG GAS TYPE LP S ARE BASED ON 7.0" WC LENGTH OF34 1/4" WIDTH OFORFICE CUTBTU OUT FPB-L30TFS-P 6 7/8" 34 1/2" CUT OUT 7 1/8" 6 3/8" 4 1/4" 12 3/4"HEIGHT OF SPECIFICATIONS PART INSIDE NO. 30"PAN TOINSIDE BOTTOM 6 1/4" D 11.0" WC FOR LIQUID MIN. INLET 36" #386 7/8" LENGTH 53K40 1/2" 20KLENGTH 5.0" WC 10.5" WC FPB-L36TFS-NFPB-L24TFS-N 40 1/4" CRADLE 7 1/8"LPK#50LENGTH 6 3/8" 4 1/4" 12 3/4" CRADLE WIDTH PAN DEPTH APPLIANCE OF CRADLE NER ORIFICE. FLEX LINE 35K40 1/2" 22K D 7 1/8" MAX. INLET 10.5" FPB-L36TFS-PFPB-L24TFS-P 6 3/8" 4 1/4"WCG 1213.0" 3/4" WC H MODEL A 40 1/4" B #506 7/8" 5 C3/4" E36" F PE SIZING WILL ALSO AFFECT 8 1/2" FPB-L30TFS-N #35 42K 23K LPK#48 NORMAL INLET 7.0" WC 11.0" WC BTU'S MAY VARY SLIGHTLY MODELFPB-L30TFS-P BTU VIEW CONVERSION KITTO COMBUSTIBLES 42K 30K #47 BTUEND SIDE VIEW CLEARANCE PRESSURE 6GAS OUTPUT FPB-24LTFS-N 28 1/4” FACTORY6ORFICE 7/8" 28 1/2” 1/8"NO.LPK#44 24” 3/8”TYPE NG 4 GAS 1/4”TYPE LP 12 3/4" CIFICATIONS. FPB-L36TFS-N 0.125" 55K 37K 7PART SPECIFICATIONS MIN. INLET FPB-L24TFS-N FPB-L36TFS-P #43 55K 37K 5.0" WC 10.5" WC #38 53K 20K LPK#50 MIN/MAX MIN/MAX FPB-L24TFS-P PAN #50 MAX.HEIGHT INLET 10.5" WC 13.0" WC RALL LENGTH OVERALL WIDTH INSIDE35K PAN 22K INSIDE PAN OVERALL NOTES: CUT1/4” OUT CUT OUT 28 6 7/8" LENGTH 28 1/2” WIDTH 7 LPK#48 1/8” 24” 6 3/8” 4 1/4” 12 3/4” 42K INLET PER 7.0"APPLICATION. WC 11.0"ARE WC NOT FIELD FPB-L30TFS-N DEPTH F CRADLE FPB-24LTFS-P OF CRADLE APPLIANCE 1. THESE FIRE PITS ARE#35 SOLD AS NATURAL OR LP 23K GAS MODELS. YOU MUST ORDER OF THENORMAL SPECIFIC MODEL THE THESE LENGTH LENGTH #47 CONVERTIBLE. A B FPB-L30TFS-P E42K 30K F G H C PITS REQUIRE D 18-SQUARE INCHES LPK#44 PER SIDE OF ENCLOSURE. 0.125" 55K OF CROSS 37K FLOW VENTILATION FPB-L36TFS-N 2. ALL FIRE 34281/4” 6 7/8” 34 CODES 1/2” 7 1/8”4 1/4" 6 3/8” 4 1/4” 12 3/4” 6 7/8"FPB-L36TFS-P 1/2"ADHERE TO 7 1/8" 24"55K 3/8" INSTALLING 12 3/4" 28 1/4" FPB-30LTFS-N #43 37K 6WHEN 3. ALWAYS YOUR STATE AND LOCAL FIRE PITS . 30” 28 1/4" 6 7/8" 28 1/2" 7 1/8" 24" 6 3/8" 4 1/4" 12 3/4" NOTES: 4. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO VALVE SYSTEMS AS WELL AS ALL GAS CONNECTIONS. 6 7/8" 34 1/2" NOT TO7 SCALE. 1/8" 30" 6 3/8" 4 1/4" 12 3/4" 34 1/4" 5. FIRE DRAWINGS 1. THESE PITS ARE SOLD AS NATURAL OR LP GAS MODELS. YOU MUST ORDER THE SPECIFIC MODEL PER THE APPLICATION. THESE ARE NOT FIELD 34 1/4" 6 7/8" CONVERTIBLE. 1/2" 1/8"6 7/8” 4 1/4" 12 3/4" FPB-30LTFS-P 34341/4” 34 1/2” 6 3/8" 7 1/8” 30” 3/8” PROFESSIONALS 4 1/4”FOR PLANNING12 3/4” 6. THIS DRAWING IS 7 INTENDED FOR USE30"

BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND6DESIGN PURPOSES 36" FOR CONSTRUCTION. 40 1/4" 6 7/8" 40 1/2" 7 1/8" 6 3/8" 4 1/4" 12 3/4" THIS DRAWING MAY NOT BE USED 2. ALL FIREONLY. PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. 40 1/4" 6 7/8" 40INFORMATION 1/2"TO YOUR7STATE 1/8" AND LOCAL 36" 6 AT 3/8" 4PITS 1/4" 12 3/4" 7. ALL CONTAINED HEREIN WAS CURRENT THE TIME DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT 3. ALWAYS ADHERE CODES WHEN INSTALLING FIREOF .

TO BE ACCURATE. FPB-36LTFS-N 40 6CONSIDERED 7/8” PROVIDE 40 1/2” 7 1/8”AS WELL AS ALL36” 6 3/8” 4 1/4” 12 3/4” 4. ALL FIREMANUFACTURER PIT1/4” INSTALLATIONS SHOULD ACCESS TO VALVE SYSTEMS GAS CONNECTIONS. CONVERSION KITPRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER 8. CONTRACTOR'S NOTE: FOR DRAWINGS NOT TO SCALE. FACTORY ORFICE 5.BTU OUTPUT PRESSURE GAS TYPE NG GAS TYPE LP REFERENCE NUMBER 5053-041.

PART FOR NO. 6. THIS DRAWING IS INTENDED USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES THESE FIRE PITS MIN.40 INLET #38 53K 20K LPK#50 5.0" WC 10.5"36” WC FPB-36LTFS-P 40DRAWING 1/4” MAY 1/2” 7 1/8” 6 3/8” 4 1/4” 12 3/4” ONLY. THIS NOT 6 BE7/8” USED FOR CONSTRUCTION. ARE TESTED TO #50 22K MAX. INLET WC 13.0" WCBE REVIEWED AND APPROVED BY THE PRODUCT 7. 35K ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME 10.5" OF DEVELOPMENT BUT MUST ANSI Z21.97-2014 / #35 42K 23K NORMAL INLET 7.0" WC 11.0" WC MANUFACTURER TO BELPK#48 CONSIDERED ACCURATE. CSA 2.41-2014 30K #47 8. 42K CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER LINEAR TFS BURNER SYSTEMS LPK#44 REFERENCE 0.125" 55K 37K NUMBER 5053-041.

STANDARDS. THESE FIRE PITS #43 55K 37K REVISION DATE 5053-041 ARE TESTED TO 06/09/2016 BTU OUTPUT CONVERSION ANSI GAS Z21.97-2014 /LP MODEL FACTORY ORIFICE PRESSURE GAS TYPE NG TYPE PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD. CADdetails.com RE SOLD AS NATURAL OR LP GAS MODELS. YOU MUST ORDER THE SPECIFIC MODEL PER THE APPLICATION. HIGH LOW KIT PART THESE NO. ARE NOT FIELD CSA 2.41-2014 LINEAR TFS BURNER SYSTEMS STANDARDS. QUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. MIN. INLET 5.0" WC 10.5" WC #38FIRE PITS .

35K 20K LPK#50 TO YOUR STATEFPB-24LTFS-N AND LOCAL CODES WHEN INSTALLING REVISION DATE 06/09/2016 5053-041 ALLATIONS SHOULD PROVIDE ACCESS TO VALVE SYSTEMS AS WELL AS ALL GAS CONNECTIONS. MAX. INLET 10.5" WC 13.0" WC FPB-24LTFS-P #50 35K 22K O SCALE. PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD. CADdetails.com NTENDED FORFPB-30LTFS-N USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES NORMAL INLET 7.0" WC 11.0" WC #35 42K 23K LPK#48

FS-P

LINEAR SERIES

BTU SPECS

GAS PRESSURE

LINEAR SERIES

NG MAY NOT BE USED FOR CONSTRUCTION. FPB-30LTFS-P #47 42KBE 30K CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST REVIEWED AND APPROVED

BY THE PRODUCT O BE CONSIDERED ACCURATE. DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0” WC FOR FPB-36LTFS-N 0.125” 55K 37K LPK#44 OTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER NATURAL GAS (NG) AND 11.0” WC FOR LIQUID PROPANE BER 5053-041. FPB-36LTFS-P #43 55K 37K -

INEAR SERIES

NEAR TFS BURNER SYSTEMS This product can expose you to Chromium, which is

16 CADDETAILS.COM LTD.

30

known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

(LP) THESE AT THEFIRE BURNER PITS ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE ARE TESTED TO SIZING WILL ALSO AFFECT BTU’S. AS A RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE ANSI Z21.97-2014 / LISTED BTU SPECIFICATIONS. CSA 2.41-2014 STANDARDS.

REVISION DATE 06/09/2016 CADdetails.com

FIREGEAR OUTDOORS FAX: (888) 672-8024 www.firegearoutdoors.com www.firegearoutdoors.com CONSERVATION WAY CA www.firegearoutdoors.com AND APPROVED

BY THE PRODUCT FPB-L36MT-N FORT WAYNE, IN 46809 SELECT DESIRED SYSTEM: SELECT DESIRED SYSTEM: L SERIES MT SYSTEMS TOLL FREE: 1-888-672-8929 DESIRED LP GAS: NATURAL GAS: SELECT NATURAL GAS: SYSTEM: FAX: (888) 672-8024 NATURAL GAS: FPB-L24MT-P THESE FIRE PITS FPB-L24MT-N FPB-L24MT-N B D www.firegearoutdoors.com ARE TESTED TO C C FPB-L24MT-N FPB-L24MT-N

FPB-L30MT-N 9230

N PROFESSIONALS FOR PLANNING PURPOSES

D SYSTEM:

:

N

N

N

FPB-L30MT-N FPB-L30MT-N FPB-L30MT-P ANSI Z21.97-2014 / A FPB-L30MT-N FPB-L36MT-NCSA 2.41-2014 FPB-L36MT-N FPB-L36MT-P STANDARDS. LP GAS: LPFPB-L36MT-N GAS: REVISION DATE 06/09/2016 LPFPB-L24MT-P GAS: FPB-L24MT-P DISCLAIMER: BTU LISTINGS ARE CADdetails.com BASED ON 7.0" WC FOR NATURAL GAS FPB-L24MT-P C FPB-L30MT-P FPB-L30MT-P (NG) AND 11.0" WC FOR LIQUID A FPB-L30MT-P PROPANE (LP) AT THE BURNER FPB-L36MT-P FPB-L36MT-P 23"PROPER TYP. ORIFICE. FLEX LINE SIZE AND FPB-L36MT-P GAS PIPE SIZING WILL ALSO TOPAFFECT VIEW

A C A

2" TYP.

23" TYP. TOP VIEW B D

2" TYP.

E

44" CEILING B D B D 2" TYP. 17" SIDEWALL 2" TYP.

F

44" CEILING 17" SIDEWALL

44" CEILING 44" CEILING

1" FL TO BO OF CR

17" SIDEWALL 17" G H SIDEWALL END VIEW CLEARANCE TO COMBUSTIBLES

23" TYP. 23"VIEW TYP. TOP SIDE VIEW 44" CEILING BTU'S. AS A RESULT YOUR BTU'S MAY TOP VIEW DISCLAIMER: BTU LISTINGS ARE DISCLAIMER: BTU LISTINGS ARE P B D VARY SLIGHTLY FROM THE LISTED 1" FLOOR 1" FLOOR BASED ON 7.0" WC FORBASED NATURAL ON GAS 7.0"BTU WC LISTINGS FOR NATURAL F E E F DISCLAIMER: ARE GAS BTU SPECIFICATIONS. TO BOTTOM TO 1" BOTTOM FLOOR P (NG) AND 11.0" WC FOR(NG) LIQUID AND 11.0" WC FOR LIQUID BASED ON 7.0" WC FOR NATURAL GAS E 17" F OF CRADLE OF BOTTOM CRADLE 2" TYP. TO PROPANE (LP) AT THE BURNER PROPANE (LP) AT THE BURNER MIN/MAX MIN/MAX (NG) AND 11.0" WC FOR LIQUID P H PAN G H G PAN SIDEWALL WIDTH INSIDE INSIDE PAN OVERALL HEIGHT OF CRADLE ORIFICE. FLEX LINE SIZE AND PROPER ORIFICE. FLEX LINE SIZE AND PROPEROVERALL LENGTH OVERALL 23"AT TYP. CUT OUT CUT OUT PROPANE (LP) THE BURNER DEPTH MODEL OF CRADLE OF CRADLE LENGTH WIDTH OF APPLIANCE H G GAS PIPE SIZING WILL ALSO AFFECT GAS PIPE SIZING WILL ALSO AFFECT LENGTH LENGTH ORIFICE. TOP FLEXVIEW LINE SIZE AND PROPER SIDE VIEW VIEW CLEARANCE SIDEBVIEW END END VIEWTOECOMBUSTIBLES CLEARANCE A F TO COMBUSTIBLES G H BTU'S. AS A RESULT YOUR MAY BTU'S. AS A RESULT YOUR MAY GASBTU'S PIPE SIZING WILL ALSOBTU'S AFFECT C D SIDE VIEW END VIEW CLEARANCE TO COMBUSTIBLES AREVARY SLIGHTLY FROM THE VARYLISTED SLIGHTLY FROM THEBTU'S LISTED 6 7/8" 28 1/2" 7 1/8" 24" 6 3/8" 4 1/4" 4 3/4" FPB-L24MT-N 28 1/4" BTU'S. AS A RESULT YOUR MAY 1" FLOOR RAL GAS BTU SPECIFICATIONS. BTU E FROM FPB-L24MT-P 28 1/4"F 6 7/8" 28 1/2" 7 TO 1/8"BOTTOM 24" 6 3/8" 4 1/4" 4 3/4" VARYSPECIFICATIONS. SLIGHTLY THE LISTED D FPB-L30MT-N 34 1/4" 6 7/8" 34 1/2" 7 OF 1/8"CRADLE 30" 6 3/8" 4 1/4" 4 3/4" BTU SPECIFICATIONS. MIN/MAX MIN/MAXMIN/MAX MIN/MAX R FPB-L30MT-P 30"PAN HEIGHT 34 1/4" WIDTH 6 7/8" 7 1/8" 6 3/8" OVERALL 4 1/4" 4 3/4" PAN OVERALL LENGTH OVERALL INSIDE PAN34 1/2" INSIDEINSIDE PAN OVERALL OVERALLWIDTH LENGTH OVERALL PANPAN INSIDE HEIGHT HCUT CUT40 OUT OUT CUTGOUT CUT OUT PROPER MODEL MIN/MAX MIN/MAX FPB-L36MT-N 36" 1/4" 6 7/8" 7 1/8" 6 3/8" OVERALL 4 1/4" 4 3/4" DEPTHINSIDE DEPTH OF CRADLE OFOF CRADLE LENGTH 40 1/2"WIDTH OFPAN APPLIANCE MODEL CRADLE OF CRADLE LENGTH WIDTH OF APPLIANCE PAN OVERALL LENGTH OVERALL WIDTH INSIDE PAN HEIGHT LENGTH LENGTHCUT LENGTH LENGTH AFFECT OVERALL OVERALL MIN/MAX OVERALL 4 3/4" OUT E CUT FPB-L36MT-P 40END 1/4"MIN/MAX 6 7/8" 40OUT 1/2" F 7E1/8" G 36" 6 3/8" 4 1/4" A B H A B F G H SIDE VIEW VIEW CLEARANCE TO COMBUSTIBLES DEPTH MODEL OF CRADLE OF CRADLE D WIDTH OF APPLIANCE U'S MAY CCUT OUTLENGTH D INSIDE LENGTH LENGTH LENGTH OF WIDTH OF C BCUT OUT PAN INSIDE PAN HEIGHT OF E F G H 28 1/4" 6 7/8" 28 1/2" 6 7/8" 7 1/8" 28 C1/2" 24" 7 1/8" 6 3/8" 24" 4 1/4" 6 3/8" 4 3/4" 4 1/4" FPB-L24MT-N 28A1/4" 4 3/4" STED FPB-L24MT-N D CRADLE CRADLE LENGTH LENGTH LENGTH WIDTH PAN DEPTH APPLIANCE CONVERSION KIT MODEL BTU FPB-L24MT-P 28 1/4" 6 7/8" 28 1/2" 1/8" 28 4 3/4" 44 1/4" FPB-L24MT-P 28 7/8" 7ORFICE 28 1/2" 1/2" 1/8" 6 3/8" 24" 24" 4 1/4" 66 3/8" 3/8" 1/4"GAS TYPE NG 3/4" GAS TYPE LP 66 7/8" 77 1/8" 44 3/4" FPB-L24MT-N 28 1/4" 1/4" FACTORY BTU24" OUTPUT PRESSURE FPB-L30MT-NMODEL FPB-L24MT-P 34 1/4" 6 7/8" FPB-L30MT-N 34 7/8" C7 1/8" 28 34 1/2" 1/2" D30" 77 1/8" 1/8" 6 3/8" 3/8" 4 3/4" 44 1/4" 1/4" 3/4" H SPECIFICATIONS NO. 4 1/4" F66 3/8" A EPART30" G 28 1/4" 1/4" B 34 1/2" 66 7/8" 24" 44 3/4" MIN/MAX MIN/MAX #427 1/8"PAN34 35,000 LPK#50 MIN. 4INLET FPB-L30MT-P 30" 77 OVERALL FPB-L30MT-P 30" 4 1/4" 66 3/8" 34 1/4" 6FPB-L24MT-N 7/8" 34 1/2" 3/4" 44 1/4" 34 1/4" 1/4" INSIDE 7/8"INSIDE 34 1/2" 1/2"PAN 1/8" 6 3/8" 3/8" 1/4" 5.0" WC 44 3/4" 3/4" 10.5" WC FPB-L30MT-N 34 1/8" 30" LL LENGTH OVERALL WIDTH PAN66 7/8" HEIGHT CUT OUT CUTFPB-L24MT-P OUT #507 1/8" 34 35,000 MAX. 4INLET 10.5" WC44 3/4" 13.0" WC FPB-L36MT-N 36" FPB-L36MT-N 36" 4 1/4" 66 3/8" 40 1/4" 3/8" 30" 3/4" 4441/4" 40 1/4" 1/4"6 7/8" 40 1/2" 66 7/8" 7/8" 40 1/2" 1/2" 1/8" 624” 3/8" 1/4" 3/4"4 3/4" 34 FPB-24LMT-N 28 1/4” 6 7/8" 28 1/2” 7DEPTH 1/8" 77 1/8" 6 3/8” 1/4” CRADLE OF CRADLE FPB-L30MT-P LENGTH WIDTH OF APPLIANCE INLET LPK#48 FPB-L36MT-P 40 1/4" 6FPB-L30MT-N 7/8" 40 1/2" 66 7/8" 36" 77 1/8" FPB-L36MT-P 40 1/4" 1/4" 7/8"#387 1/8" 40 40 1/2" 1/2" 45,000 1/8" 6 3/8" 36" 4 1/4" 66NORMAL 3/8" 4 3/4" 4 1/4" 1/4" 7.0" WC 44 3/4" 3/4" 11.0" WC LENGTH LENGTH FPB-L36MT-N 36" 40 3/8" 4 A B E F G H FPB-L30MT-P C D40 1/4" FPB-L36MT-P 6 7/8"#48 40 1/2" 45,0007 1/8" 36" 6 3/8" 4 1/4" 4 3/4" LPK#44 FPB-L36MT-N #326 3/8" 55,000 6 7/8" 28 1/2" 7 1/8" 24" 4 1/4" 4 3/4" 8 1/4" FPB-24LMT-P 28 1/4” 6 7/8" 28 1/2” KIT 7CONVERSION 1/8” 24” 6 3/8” 4 1/4” 4 3/4” CONVERSION KIT MODEL BTU MODEL BTU FPB-L36MT-P #44 55,000 8 1/4" 6 7/8" 28 1/2" ORFICE7 1/8"FACTORY 24" 3/8" 4 1/4" PRESSURE 4 3/4" GAS TYPE NG GASGAS TYPE LP NG GAS TYPE LP FACTORY BTU OUTPUT PRESSURE TYPE ORFICE BTU6OUTPUT SPECIFICATIONS PART NO. SPECIFICATIONS PART NO. CONVERSION KIT MODEL 6 7/8" 34 1/2" BTU NOTES: 7 1/8" 30" 6 3/8" 4 1/4" 4 3/4" 4 1/4" GAS5.0" TYPE TYPE FACTORY BTU OUTPUT FPB-L24MT-N FPB-L24MT-N MIN. INLET 5.0"PRESSURE WC INLET 10.5" WC #42 35,000 LPK#50 MIN. WC NG GAS 10.5" WCLP #42ORFICE 35,000 LPK#50 4 1/4" 6 7/8" 34 1/2" 6 3/8" AS NATURAL 1/4" 4 BE 3/4" SPECIFICATIONS PART NO. THESE FIRE PIT 30" MODELS ARE GAS AND MUST CONVERTED TO LP FPB-30LMT-N 34 1/4” 1.7 1/8" 6 7/8” 34SHIPPED 1/2” 741/8” 30” 6 GAS. 3/8” FPB-L24MT-P FPB-L24MT-P MAX. INLET 10.5" WCINLET 13.0"10.5" WC WC #50 35,000 MAX. INLET WC4 1/4” 10.5" 13.0" WC WC 4 3/4” #50 35,000 36" FPB-L24MT-N 0 1/4" 6 7/8" 40 1/2" 7 1/8" 6 3/8" 4 1/4" 4 3/4" MIN. 5.0" #42 35,000 LPK#50 2. ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. FPB-L30MT-N FPB-L30MT-N 45,000 NORMAL INLET 45,000 NORMAL INLET LPK#48 7.0" WC 11.0" WC #38 LPK#48 7.0" WC 11.0" WC #38 FPB-L24MT-P 0 1/4" 6 7/8" 40 1/2" 7 1/8" 36" 6 3/8" 4 1/4" 4 3/4" #50 35,000 MAX. INLET 10.5" WC 13.0" WC 3. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS .

FPB-L30MT-P #48 45,000 FPB-L30MT-P #48 45,000 FPB-L30MT-N NORMAL INLET 45,000 LPK#48 7.0" WC 11.0" WC #38 4.

ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO VALVE SYSTEMS AS WELL AS ALL GAS CONNECTIONS. FPB-30LMT-P FPB-L36MT-N 34 6 7/8” 34 1/2” 7 1/8”LPK#44 30” 6 3/8” 4 1/4” 4 3/4” LPK#44 FPB-L36MT-N #321/4” 5. DRAWINGS 55,000 #32 55,000 NOT TO SCALE. FPB-L30MT-P #48 45,000 FPB-L36MT-P #44 55,000 FPB-L36MT-P #44IS INTENDED FOR55,000 55,000 CONVERSION KIT LPK#44 6.

THIS DRAWING USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES FPB-L36MT-N #32 FACTORY ORFICE BTU OUTPUT PRESSURE GAS TYPE NG GAS TYPE LP PART ONLY. NO. THIS #44 DRAWING MAY NOT BE USED FOR CONSTRUCTION. FPB-L36MT-P 55,000 NOTES: NOTES: FPB-36LMT-N 40 1/4” 6 7/8” 40 1/2” 7 1/8” 36” 6 3/8” 4 1/4” 4 3/4” 7. ALL INFORMATIONMIN. CONTAINED AT THE TIME #42 35,000 LPK#50 INLET HEREIN WAS 5.0" CURRENT WC 10.5" WCOF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT 1. THESE FIRE PIT MODELS ARE SHIPPED NATURAL GAS AND MUST CONVERTED TO LP GAS. 1. THESE FIRE PITAS MODELS ARE SHIPPED AS BE NATURAL GAS AND MUST BE CONVERTED TO LP GAS.

NOTES: MANUFACTURER TO BE INLET CONSIDERED ACCURATE. #50 35,000 10.5" WC 13.0" WC 2. ALL FIRE PITS REQUIRE INCHES OF CROSS FLOWMAX. VENTILATION PER SIDE OFVENTILATION ENCLOSURE.PER 2. 18-SQUARE ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW SIDE OF ENCLOSURE. 1. THESE FIRE PIT ARE SHIPPED AS NATURAL GASAND ANDCOMPANY MUST BE CONVERTED TO LP GAS. 8. MODELS CONTRACTOR'S NOTE: FOR PRODUCT INFORMATION NORMAL INLET #38 7.0" WC 3. ALWAYS ADHERE45,000 TO YOUR STATE ADHERE ANDLPK#48 LOCAL CODESSTATE WHEN INSTALLING FIRE PITS . INSTALLING 3. ALWAYS TO YOUR AND LOCAL CODES WHEN FIRE11.0" PITS .WCVISIT www.CADdetails.com/info AND ENTER 2. ALL40 FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF36” ENCLOSURE. FPB-36LMT-P 1/4” 6 7/8” 40 1/2” 7 1/8” 6 3/8” 4 1/4” 4 3/4” REFERENCE NUMBER 5053-043. #48 45,000 4. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO VALVE SYSTEMS AS WELL AS ALLSYSTEMS GAS CONNECTIONS. 4. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO VALVE AS WELL AS ALL GAS CONNECTIONS. 3. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS .

LPK#44 #32 5. DRAWINGS NOT 55,000 TO SCALE. 5. DRAWINGS NOT TO SCALE. 4. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO VALVE SYSTEMS AS WELL AS ALL GAS CONNECTIONS. 6. THIS DRAWING IS INTENDED USE BYISARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES 6. THISFOR DRAWING INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES #44 55,000 5. DRAWINGS NOT TO SCALE.

LINEAR SERIES

THESE FIRE P ARE TESTED ANSI Z21.97-20 CSA 2.41-201 STANDARDS

ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. 6. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES 7. ALL INFORMATION CONTAINED HEREIN WAS CONTAINED CURRENT ATHEREIN THE TIME DEVELOPMENT BE REVIEWED AND APPROVED

BY THE PRODUCT 7. ALL INFORMATION WASOFCURRENT AT THEBUT TIMEMUST OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT ONLY. THIS DRAWING MAY BELINEAR USED FOR DELS ARE SHIPPED AS NATURAL GAS AND MUST BE CONVERTED TONOT LP GAS. MTCONSTRUCTION. BURNER SYSTEMS MANUFACTURER TO BE CONSIDERED ACCURATE. MANUFACTURER TO BE CONSIDERED ACCURATE. 7.

ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT RE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. 8. CONTRACTOR'S NOTE:8.FOR PRODUCT ANDNOTE: COMPANY INFORMATION VISIT www.CADdetails.com/info ENTER CONTRACTOR'S FOR PRODUCT AND COMPANY INFORMATION VISITAND www.CADdetails.com/info AND ENTER MANUFACTURER BE. CONSIDERED ACCURATE. YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRETO PITS REVISION DATE 06/0 5053-043 REFERENCE NUMBER 5053-043.

REFERENCE NUMBER 5053-043.

8. TO CONTRACTOR'S NOTE: FORAS PRODUCT COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER LLATIONS SHOULD PROVIDE ACCESS VALVE SYSTEMS AS WELL ALL GASAND CONNECTIONS. THESE FIRE PITS THESE FIRE PITS PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD. REFERENCE NUMBER 5053-043.

SCALE. ARE TESTED TO ARE TESTED TO CADdetai THESE FIRE PITS CONVERSION TENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES MODEL FACTORY ORIFICE BTU OUTPUT PRESSURE GAS NG / ANSI GAS TYPE LP ANSITYPE Z21.97-2014 ARE Z21.97-2014 TESTED TO / KIT PART NO. G MAY NOT BE USED FOR CONSTRUCTION. CSA 2.41-2014 CSAZ21.97-2014 2.41-2014 / ANSI ONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT LINEAR MT BURNER SYSTEMS LINEAR MT BURNER SYSTEMS STANDARDS. STANDARDS. BE CONSIDERED ACCURATE. CSA 2.41-2014 MIN. INLET 5.0" WC 10.5" WC FPB-24LMT-N #42 35,000 LPK#50 LINEAR MT BURNERAND SYSTEMS E: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info ENTER REVISION DATE 06/09/2016 043 REVISIONSTANDARDS. DATE 06/09/2016 5053-043 MAX. INLET 10.5" WC 13.0" WC FPB-24LMT-P #50 35,000 R 5053-043.

BTU SPECS

GAS PRESSURE

LINEAR SERIES LINEAR SERIES LINEAR SERIES

5053-043©2016BYCADDETAILS.COM ECTED BY COPYRIGHT LTD.CADDETAILS.COM LTD. PROTECTED COPYRIGHT ©2016 FPB-30LMT-N #38 45,000 PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD. FPB-30LMT-P #48 45,000

LPK#48

EAR MT BURNERFPB-36LMT-N SYSTEMS

#32

55,000

LPK#44

FPB-36LMT-P

#44

55,000

-

NEAR SERIES

-

CADDETAILS.COM LTD.

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

THESE FIRE PITS REVISION DATE 06/09/2016 CADdetails.com CADdetails.com NORMAL 7.0" WC 11.0" WC ARE TESTEDINLET TO CADdetails.com ANSI Z21.97-2014 / CSA 2.41-2014 DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0” WC FOR STANDARDS. NATURAL GAS (NG) AND 11.0” WC FOR LIQUID PROPANE REVISION 06/09/2016 (LP)DATE AT THE BURNER ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO AFFECT BTU’S. AS CADdetails.com A RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE LISTED BTU SPECIFICATIONS.

This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

31

COMBINING THE L SERIES

Locate and remove the extension bracket on both burners

Bring the two ends together that you removed the brackets from

Connecting two (2) MT units

Connecting two (2) TFS units

32

Here are the possible combinations.

Model

+

Model

=

Minimum Rough Opening

Total BTU’s NG

Total BTU’s LP

FPB-36LTFS

+

FPB-36LTFS

=

76.25” long x 7 1/8” wide

110,000

110,000

FPB-36LMT

+

FPB-36LMT

=

76.25” long x 7 1/8” wide

104,000

104,000

FPB-36LTFS

+

FPB-30LTFS

=

70.25” long x 7 1/8” wide

97,000

97,000

FPB-36LMT

+

FPB-30LMT

=

70.25” long x 7 1/8” wide

97,000

100,000

FPB-36LTFS

+

FPB-24LTFS

=

64.25” long x 7 1/8” wide

90,000

90,000

FPB-36LMT

+

FPB-24LMT

=

64.25” long x 7 1/8” wide

87,000

90,000

FPB30LTFS

+

FPB30LTFS

=

64.25” long x 7 1/8” wide

84,000

84,000

FPB30LMT

+

FPB30LMT

=

64.25” long x 7 1/8” wide

90,000

90,000

FPB30LTFS

+

FPB24LTFS

=

56.25” long x 7 1/8” wide

77,000

77,000

FPB30LMT

+

FPB24LMT

=

56.25” long x 7 1/8” wide

80,000

80,000

FPB-24LTFS

+

FPB-24LTFS

=

52.25” long x 7 1/8” wide

70,000

70,000

The clearance to combustible material for combined burners is the same as each individual burner. Please refer to individual burner list for clearance to combustible material

WIRING A SWITCH TO COMBINED BURNERS

MODULE

Access control module from the valve box and locate the brown wires.

MODULE OFF

ON NECTI

CON

CON N

When wiring (2) two L Series burners to the same switch, a two-pole switch is required (refer to diagram as an example). Maximum length 50’ of 18 gauge or larger wire, suitable for outdoor appliances - always refer to your local codes.

Slide the switch on the control module from Remote to Off.

ECTI

ON

Connect the two brown wires to the 18 (or larger) gauge wire by connecting to the 1/4” terminals on the brown wires.

Connect the other end of the wire to one side of the two-pole switch.

L SERIES OPTIONAL ACCESSORIES

TRIM (OPTIONAL ACCESSORY)

TM-R-AF1TX

Wireless wall mount timer (30/60/120min)

TRIM-L24

3/4” stainless steel decorative trim fits FPB-24L Series

1001D-AF1TX

Wireless wall mount switch (On/Off)

TRIM-L30

3/4” stainless steel decorative trim fits FPB-30L Series

1322WT

Wireless wall mount switch (On/Off/High/Low)

TRIM-L36

3/4” stainless steel decorative trim fits FPB-36L Series

WS

Wired wall mount switch (On/Off)

TRIM-L48

AF-4000ADP24(80)

110 volts AC adapter, coverts to 7.5 DC volts for TFS systems

3/4” stainless steel decorative trim fits (2) FPB-24L Series end to end

TRIM-L60

AF-4000HAT

Home/Pool automation transmitter system (works with most manufacturers systems)

3/4” stainless steel decorative trim fits (2) FPB-30L Series end to end

TRIM-L72

LPK#50

Liquid Propane (LP) Conversion Kit. Converts fire pit from Natural Gas to LP Gas. Includes: Orifice/Air Shutter, rating plate label sticker and instructions. For use with FPB-24LMT-N, 40,000 Btu

3/4” stainless steel decorative trim fits (2) FPB-36L Series end to end

LPK#48

Liquid Propane (LP) Conversion Kit. Converts fire pit from Natural Gas to LP Gas. Includes: Orifice/Air Shutter, rating plate label sticker and instructions. For use with FPB-30LMT-N, 47,000 Btu

LPK#44

Liquid Propane (LP) Conversion Kit. Converts fire pit from Natural Gas to LP Gas. Includes: Orifice/Air Shutter, rating plate label sticker and instructions. For use with FPB-36LMT-N, 60,000 Btu

LIDS

Stainless Steel lids with brushed finished

WINDSHIELDS

Tempered glass windshields

VENT-KIT-6X12

Includes two (2) 6” tall x 12” wide vents with mounting screws

33

A C

(888) 672-8024WAY 9230FAX: CONSERVATION www.firegearoutdoors.com FIREGEAR OUTDOORS FORT WAYNE, IN 46809 NATURAL GAS: LP GAS: A WAY TOLL FREE: 1-888-672-8929 9230 CONSERVATION C FPB-16RBSMT-N SELECT DESIRED SYSTEM: FPB-16RBSMT-P FORT WAYNE, IN 46809 SPECIFICATIONS FAX: (888) 672-8024 FPB-19RBSMT-N LP FPB-19RBSMT-P GAS: NATURAL GAS: TOLL FREE: 1-888-672-8929 www.firegearoutdoors.com A FPB-25RBSMT-N FPB-25RBSMT-P FAX: (888) 672-8024 FPB-16RBSMT-N FPB-16RBSMT-P H C SELECT DESIRED SYSTEM: www.firegearoutdoors.com FPB-29RBSMT-N FPB-29RBSMT-P FPB-19RBSMT-N FPB-19RBSMT-P SELECT DESIRED SYSTEM:

NON-LISTED BURNER SYSTEMS NATURAL GAS: NON-LISTED FPB-33RBSMT-N FPB-25RBSMT-N FPB-16RBSMT-N FPB-29RBSMT-N ROUND MTLPSYSTEMS GAS: NATURAL GAS:

SELECT DESIRED SYSTEM:

A LPFPB-25RBSMT-P GAS: FPB-33RBSMT-P C FPB-16RBSMT-P FPB-29RBSMT-P FPB-19RBSMT-P FPB-33RBSMT-P

H

TOP VIEW G A B C H TOP VIEW G F D A ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO E B FPB-25RBSMT-N AFFECTFPB-25RBSMT-P H BTU'S. ASLISTINGS A RESULT YOUR BTU'S SLIGHTLY FROM FPB-33RBSMT-N FPB-33RBSMT-P C DISCLAIMER: BTU ARE BASED ONMAY 7.0"VARY WC FOR NATURAL THE(NG) LISTED SPECIFICATIONS. ANDBTU 11.0" WC FOR LIQUID PROPANE (LP) AT THE BURNER FPB-29RBSMT-N GAS FPB-29RBSMT-P CLEARANCE TO COMBUSTIBLESF FRONT VIEW D TOP VIEW G ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO E TO A CLEARANCE TO A CLEARANCE TO OVERALL CLEARANCE A FPB-33RBSMT-N AFFECTFPB-33RBSMT-P OUTSIDE - MAX PAN BTU'S. AS A RESULT YOURDIM. BTU'S MAYMIN VARY SLIGHTLYINSIDE FROM APPLIANCE COMBUSTIBLE FLOOR COMBUSTIBLE A COMBUSTIBLE B MODEL THE LISTED BTU SPECIFICATIONS. (INCLUDING LIP) CUT WC OUT DIM. PAN DIM. DEPTH TO COMBUSTIBLES FRONTC VIEW VIEW DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0"TOP FOR NATURAL SIDEWALL HEIGHT FROM THE LIP OF THE PANCLEARANCE CEILING G C D A PROPANE (LP) BAT GAS (NG) AND 11.0" WC FOR LIQUID A THE BURNER CLEARANCE E FD TO A G TO A CLEARANCE H F TO OVERALL CLEARANCE OUTSIDE MIN INSIDE PAN B17 1/4" ORIFICE. FLEX LINE SIZE AND WILL ALSO 16" 14" 57" FPB-16RBSMT-N 18 PROPER 1/2"DIM. GAS16PIPE 1/2"-SIZING -MAX 2 1/2" APPLIANCE 6 3/8" 15 1/2"EFLOOR COMBUSTIBLE COMBUSTIBLE A COMBUSTIBLE DIM. DEPTH (INCLUDING LIP) MAY CUT OUT DIM. TU LISTINGS ARE BASED ON 7.0" MODEL WC FOR NATURAL AFFECT BTU'S. AS A RESULT YOUR VARY SLIGHTLY FROM 16" 14" 57" FPB-16RBSMT-P 18 1/2" BTU'S 16 1/2" -C17 1/4" PAN 2 1/2" 6 3/8" SIDEWALL HEIGHT FROM THE 15 LIP1/2" OF THE PAN CEILING OUTSIDE CLEARANCE TO AF CLEARANCE CLEARANCE C D 2 D3/4" 1.0" WC FOR LIQUID PROPANE (LP) AT THE BURNER A 22" 19" 18" 16" 54" THE LISTED BTU SPECIFICATIONS. FPB-19RBSMT-N 19 1/4"B- 21 1/2" 6FRONT CLEARANCE E5/8" VIEW F G TO COMBUSTIBLES H LINE SIZE AND PROPER GASFPB-19RBSMT-P PIPE SIZING WILL 191/2" 1/4"--17 211/4" 1/2" 19" 3/4" 5/8" 16" DIM.ALSO 18 22" OVERALL COMBUSTABLE TO A14" TO 57" A54" TO 16" FPB-16RBSMT-N 1/2" 16 22E1/2" 663/8" 1518" 1/2" TO A CLEARANCE TO A OVERALL CLEARANCE CLEARANCE AS A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM FPB-25RBSMT-N 28" 25MIN 1/4"-- -MAX 271/4" 1/2" INSIDE 25" 21/2" 3/4" 5/8" 19" 69" OUTSIDE 16" 14" 57" FPB-16RBSMT-P 18MIN 1/2"DIM. 16 1/2" 17 2PAN 663/8" 1518" 1/2" FLOORCOMBUSTABLE (INCLUDING CUT INSIDE PAN APPLIANCE FLOOR FROM COMBUSTABLE COMBUSTIBLE COMBUSTIBLE A COMBUSTIBLE 28" - MAX19 25" 18" THE 19" 69" FPB-25RBSMT-P 25FRONT 1/4" 27 1/2" PAN 3/4" APPLIANCE 65/8" 5/8" SPECIFICATIONS. MODEL 22" 19" 18" 16" 54" TO COMBUSTIBLES VIEW FPB-19RBSMT-N 1/4" - -21 1/2" 223/4" 6CLEARANCE DIM. DEPTH CUT OUT DIM. (INCLUDING LIP) LIP) OUT DIM. PAN DIM.19" HEIGHT PAN CEILING SIDEWALL HEIGHT FROMLIP THEOF LIP OF THE PAN SIDEWALL CEILING 29" DEPTH 18" 19" 69" FPB-29RBSMT-N 3222"1/4" 3/4" 5/8" FPB-19RBSMT-P 19 30" 1/4"-B-31213/8" 1/2" CLEARANCE 223/4" 66CLEARANCE 5/8" 18" 16" 54" C DTO A1/4" TO A CLEARANCE TO OVERALL A FPB-29RBSMT-P 32 30" 31 3/8" 29" 2 3/4" 6 5/8" 18" 19" 69" E F G H A B C D E F G H OUTSIDEMODEL DIM. MIN MAX INSIDE PAN FPB-25RBSMT-N 28" 25 1/4" - 27 1/2"COMBUSTIBLE 25" 2 3/4" 6 5/8" 19" 69" APPLIANCE FLOOR COMBUSTIBLE 15 A18" COMBUSTIBLE FPB-33RBSMT-NPAN DIM.18 3628" 1/4" 33" 3/4" 5/8" 18" 19" 69" 16" 14" 57" FPB-16RBSMT-N 1/2" 16 1/2" 1/4" 1/2" 3/8" 1/2" 25" 18" 19" 69" FPB-25RBSMT-P 2534" 1/4"- --3517 271/4" 1/2" 2223/4" 6665/8" DEPTH (INCLUDING LIP) CUT OUT DIM. SIDEWALL HEIGHT FROM THE PAN 666 CEILING FPB-33RBSMT-P 3619 1/4" 34" 1/4" 33"LIP2 OF 3/4" 65/8" 5/8" 18" 19" 69" FPB-19RBS16MT-N 22” 1/4” - 21 19" THE 3/4" 5/8" 18” 36” 19" 96"57" 16" 14" FPB-16RBSMT-P 18 1/2" 161/2” 1/2"--31 -35173/8" 1/4" 1/2" 3/8" 1518" 1/2" 29" 69" FPB-29RBSMT-N 30" 2223/4" B C 32 1/4" D A 19" 18" H 16" 54" FPB-19RBSMT-N 1930" - 213/8" 1/2" 3/4" 5/8" E1/4"- 31 G MODEL BTU FPB-29RBSMT-P 3222" 1/4" 29" F 22 3/4" 66 5/8" 18" 19" 69" OUTPUT PRESSURE NG16" GAS TYPE LP96”54" FPB-25RBS22MT-N 28” 16" 3622" 25 1/4"FACTORY - 2719 25"BTU19" 2 3/4” 5/8" 14" 18" 36” FPB-19RBSMT-P 1/4"-ORFICE - 211/4" 1/2" 3/4" CONVERSION 5/8" 18" 57" GAS TYPE T-N 18 1/2" 16 1/2" - 17 1/4" 21/4" 1/2" 61/2" 3/8" FPB-33RBSMT-N 34" 35 33"15 1/2" 22 3/4" 6665/8" 18" 19" 69" SPECIFICATIONS FPB-25RBSMT-N 28" 25 1/4" 27 1/2" 25" 2 3/4" 6 5/8" 18" 19" 69" 16" 14" 57" T-P 18 1/2" 16 1/2" 17 1/4" 2 1/2" 6 3/8" 15 1/2" FPB-33RBSMT-P 36 1/4" 34" 33" 6 5/8" 69" FPB-16RBSMT-N #35- 35 1/4" 45,000 2 3/4" LPK#47 MIN.18" INLET 5.0" WC 19" 10.5" WC 28" 18" 22" 18" 54" FPB-29RBS22MT-N 32 1/4"19" 29" 25" 2 3/4" 5/8" 16" 18" 36” 19" 96”69" FPB-25RBSMT-P 25 1/4" - 27 1/2" 2 3/4" 665/8" T-N 19 1/4" - 21 1/2" 2 30" 3/4" - 31 3/8" 6 #47 5/8" FPB-16RBSMT-P 45,500 MAX. INLET 10.5" WC 13.0" WC MODEL 18" INLET FPB-29RBSMT-N 32 21/4" - 31 3/8" BTU29" 6 5/8" T-P 22" 19 1/4" - 21 1/2"FPB-19RBSMT-N 19" BTU 3/4"FACTORY 630" 5/8"ORFICE 18" 2 3/4" CONVERSION 16" 54" GAS7.0" PRESSURE TYPE TYPE OUTPUT #29 65,000 LPK#41 NORMAL WCNG19" GAS 11.0" WCLP 69" SPECIFICATIONS FPB-29RBSMT-P - 31 3/8" 33" 29" 2 3/4" 665/8" 18" 69" 69" T-N 28" 25 1/4" - 27 1/2" 3/4" - 35 1/4” 630" 5/8" 18" FPB-33RBS31MT-N 36 1/4”25" 32 21/4" 34” 2 3/4" 5/8" 19" 18" 36” 19" 96” 65,000 FPB-19RBSMT-P #41 FPB-16RBSMT-N 45,000 LPK#47 MIN.18" INLET69" 5.0" WC 19" 10.5" WC FPB-33RBSMT-N 34" 33" 6 5/8" 69" 28" 25" 36 21/4" 18" 2 3/4" 19" T-P 25 1/4" - 27 1/2" 3/4" 6#35 5/8"- 35 1/4" LPK#41 FPB-25RBSMT-N #29 65,000 MAX. INLET 10.5" WC 13.0" WC FPB-16RBSMT-P #47 45,500 FPB-33RBSMT-P - 35are 1/4"only sold 33" 2 3/4" Gas. 6 5/8" 18"an 69" 19" 69" 29" 36 21/4" 18" Natural 19" purchase T-N 32 1/4" 30" - 31 3/8" FPB-25RBSMT-P 3/4" products 634" 5/8" #41 65,000 These as You must LP NORMAL INLET 7.0" WC 11.0" WC 65,000 LPK#41 19" T-P 32 1/4" 30" - 31 3/8"FPB-19RBSMT-N 29" BTU 2 3/4" 6#29 5/8" 18" 69" FPB-29RBSMT-N #29 65,000 LPK#41 MODEL Conversion Kit to convert the prodcut to Liquid Propane.

65,000 FPB-19RBSMT-P OUTPUT CONVERSION19" PRESSURE69" GAS TYPE NG GAS TYPE LP T-N 36 1/4" 34" - 35 1/4"SPECIFICATIONS 33" 2 3/4"FACTORY 6#41 5/8" 18" 65,000 FPB-29RBSMT-P #41ORFICE BTU65,000 LPK#41 19" #29 T-P 36 1/4" 34" - 35 1/4"FPB-25RBSMT-N 33" 2 3/4" 6 5/8" 18" FPB-33RBSMT-N #29 65,000 LPK#41 FPB-16RBSMT-N #35 45,000 LPK#47 MIN. INLET69" 5.0" WC 10.5" WC FPB-25RBSMT-P #41 65,000 FPB-33RBSMT-P #41 65,000 MODEL BTU FPB-16RBSMT-P #47 45,500 MAX. INLET 10.5" WC 13.0" WC FPB-29RBSMT-N #29 65,000 FACTORY ORFICE NOTES: BTU OUTPUT CONVERSION PRESSURE GASLPK#41 TYPE NG GAS TYPE LP FPB-19RBSMT-N #29 65,000 LPK#41 NORMAL INLET 7.0" WC 11.0" WC PECIFICATIONS 65,000 FPB-29RBSMT-P #41 1.FPB-19RBSMT-P ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE5.0" SYSTEMS GASWC CONNECTIONS. 65,000 #41 PB-16RBSMT-N #35 45,000 LPK#47 MIN. INLET WC AS WELL AS 10.5" FPB-33RBSMT-N #29 65,000 LPK#41 2.

THESE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE10.5" CONVERTED TO LP GAS. LPK#41 FPB-25RBSMT-N 65,000 PB-16RBSMT-P MODEL #47 45,500 MAX. INLET WC PRESSURE 13.0" WC FACTORY ORIFICE BTU#29 OUTPUT CONVERSION GAS TYPE NG GAS TYPE LP FPB-33RBSMT-P #41 65,000 3.

ALL FIRE PITS REQUIRE 18-SQUARE CROSS FLOW VENTILATION FPB-25RBSMT-P #41 INCHES OF NORMAL 65,000 PB-19RBSMT-N #29 65,000 LPK#41 INLET 7.0"PER WCSIDE OF ENCLOSURE. 11.0" WC NOTES: 4.

ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS .

65,000 TO THE VALVE SYSTEMS LPK#41 AS WELL AS GAS CONNECTIONS. 65,000 PB-19RBSMT-P #41 1.FPB-29RBSMT-N ALL FIRE PIT INSTALLATIONS#29 SHOULD PROVIDE ACCESS 5. DRAWINGS NOT TO SCALE. LPK#41 65,000 #41 PB-25RBSMT-N #29 65,000 FPB-19RBS16MT-N #31 60,000 OAS-LP45 MIN. INLET 5.0" WC 10.5" WC 2.FPB-29RBSMT-P THESE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE CONVERTED TO LP GAS. 6. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES #29 INCHES OF CROSS 65,000 LPK#41 PB-25RBSMT-P #41 65,000 3.FPB-33RBSMT-N ALL FIRE PITS REQUIRE 18-SQUARE FLOW VENTILATION PER SIDE OF ENCLOSURE. ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. FPB-19RBS16MT-P #45 55,500 MAX. INLET 10.5" WC 13.0" WC #41 AND LOCAL CODES 65,000 PB-29RBSMT-N #29 65,000 LPK#41 4.FPB-33RBSMT-P ALWAYS ADHERE TO YOUR STATE WHEN INSTALLING FIRE PITS .

7. ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT NOTES: 65,000 PB-29RBSMT-P #41 5.

DRAWINGS NOT TO SCALE. 100,000 FPB-25RBS22MT-N #22 OAS-LP35 NORMAL INLET 7.0" WC 11.0" WC MANUFACTURER TO BE CONSIDERED ACCURATE. 1.

ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS ASCONSULTANTS WELL AS GAS CONNECTIONS. 6. THIS DRAWING IS INTENDEDLPK#41 FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES PB-33RBSMT-N #29 65,000 8. CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER 2. ONLY. THESE FIREDRAWING PIT MODELS SHIPPED NATURAL GAS THIS MAYARE NOT BE USED AS FOR CONSTRUCTION. FPB-25RBS22MT-P #35 99,000 - AND MUST BE CONVERTED TO LP GAS. PB-33RBSMT-P #41 65,000 REFERENCE NUMBER 5053-017.

3. ALL INFORMATION FIRE PITS REQUIRE 18-SQUARE INCHES CROSS AT FLOW PER SIDE OFBUT ENCLOSURE. 7.

CONTAINED HEREIN WAS OF CURRENT THEVENTILATION TIME OF DEVELOPMENT MUST BE REVIEWED AND APPROVED

BY THEON PRODUCT FIRE PITS OTES: DISCLAIMER: BTU LISTINGS ARE BASED 7.0”THESE WC FOR FPB-29RBS22MT-N #22ADHERE 100,000 OAS-LP35 4. MANUFACTURER ALWAYS TO VALVE YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS .

TO BE CONSIDERED ACCURATE. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE SYSTEMS AS WELL AS GAS CONNECTIONS. ARE TESTED TO NATURAL GAS (NG) AND 11.0” WC FOR LIQUID PROPANE 5. NATURAL DRAWINGS NOT TO SCALE. 8.

CONTRACTOR'S FOR PRODUCT AND COMPANY VISIT www.CADdetails.com/info AND ENTER THESE FIRE PIT MODELS ARE SHIPPED AS MUST BE CONVERTED GAS. INFORMATION ANSI Z21.97-2014 / FPB-29RBS22MT-P #35GAS ANDNOTE: 99,000 TO LP (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND 6. OF THIS DRAWING ISVENTILATION INTENDED FOR ARCHITECTS, REFERENCE NUMBER 5053-017.

ALL FIRE PITS REQUIRE 18-SQUARE INCHES CROSS FLOW PERUSE SIDEBYOF ENCLOSURE.ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES CSAAS 2.41-2014 THESE FIRE PITS PROPER GAS PIPE SIZING WILL ALSO AFFECT BTU’S. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. FPB-33RBS31MT-N #08 160,000 OAS-LP29 ALWAYS ADHERE TO YOUR STATE AND LOCALONLY. CODES WHEN INSTALLING FIRE PITS . STEEL ROUND STAINLESS MT BURNER SYSTEMS STANDARDS. ARE TESTED TO A RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE 7. ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED

BY THE PRODUCT DRAWINGS NOT TO SCALE. FPB-33RBS31MT-P #29 ENGINEERS, 150,000ACCURATE. - DESIGN PROFESSIONALS MANUFACTURER TO BECONTRACTORS, CONSIDERED ANSIDATE Z21.97-2014 / LISTED SPECIFICATIONS. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, CONSULTANTS AND FORBTU PLANNING PURPOSES 5053-017 REVISION 05/26/2016 8. CONTRACTOR'S ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION.NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER CSA 2.41-2014 REFERENCE NUMBER 5053-017.

ROUND STEEL MT BURNER SYSTEMS PROTECTED

BY COPYRIGHT ©2016 LTD. CADdetails.com ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIMECADDETAILS.COM OFSTAINLESS DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT STANDARDS. THESE FIRE PITS MANUFACTURER TO BE CONSIDERED ACCURATE. ARE TESTED TO 5053-017 REVISION DATE 05/26/2016 CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER ANSI Z21.97-2014 / REFERENCE NUMBER 5053-017.

PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD. CADdetails.com THESE FIRE PITS CSA 2.41-2014 ARE TESTED TO ROUND STAINLESS STEEL MT BURNER SYSTEMS STANDARDS. OAS-LP45 Propane Conversion Kit (Orifice/Air Shutter) for 16” Burning Spur, 55,000 Btu ANSI Z21.97-2014 / 5053-017 REVISION DATE 05/26/2016 CSA 2.41-2014 OAS-LP35 Propane Conversion Kit (Orifice/Air Shutter) for 22” Burning Spur, 99,000 Btu ROUNDPROTECTED STAINLESS STEEL MT BURNER SYSTEMS STANDARDS.

BY COPYRIGHT ©2016 CADDETAILS.COM LTD. CADdetails.com OAS-LP29 Propane Conversion Kit (Orifice/Air Shutter) for 31” Burning Spur, 150,000 Btu REVISION DATE 05/26/2016 VENT-KIT-6X12 Includes two (2) 6” tall x 12” wide vents with mounting screws COPYRIGHT ©2016 CADDETAILS.COM LTD. CADdetails.com FPB-19RBSMT-N FPB-33RBSMT-N FPB-16RBSMT-N FPB-16RBSMT-P FPB-25RBSMT-N FPB-25RBSMT-P DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0" WC FOR NATURAL AND 11.0" WCFPB-29RBSMT-N FOR LIQUID PROPANE (LP) AT THE BURNER FPB-19RBSMT-N GAS (NG) FPB-19RBSMT-P FPB-29RBSMT-P

BTU SPECS

GAS PRESSURE

ROUND BURNER SYSTEMS

ROUND BURNER SYSTEMS

OPTIONAL ACCESSORIES ROUND BURNER SYSTEMS ROUND BURNER SYSTEMS

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

34

This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

SELECT DESIRED SYSTEM: NATURAL GAS:

NON-LISTED FPB-16RBSMT-N LP GAS: FPB-29RBSMT-N NATURAL GAS: SQUARE MT SYSTEMS

SELECT DESIRED SYSTEM:

LP GAS:

FPB-16RBSMT-N FPB-16RBSMT-P SELECT DESIRED SYSTEM: FPB-19RBSMT-N FPB-19RBSMT-P LP GAS: NATURAL GAS: FPB-25RBSMT-N FPB-25RBSMT-P FPB-16RBSMT-N FPB-16RBSMT-P FPB-29RBSMT-N FPB-29RBSMT-P SELECT DESIRED SYSTEM: FPB-19RBSMT-P FPB-19RBSMT-N A FPB-33RBSMT-N FPB-33RBSMT-P LPFPB-25RBSMT-P GAS: C NATURAL GAS: FPB-25RBSMT-N

C (888) 672-8024WAY 9230FAX: CONSERVATION FIREGEAR OUTDOORS www.firegearoutdoors.com FORT WAYNE, IN 46809 9230 CONSERVATION WAY A TOLL FREE: 1-888-672-8929 FORT WAYNE, C IN 46809 TOLL FREE: 1-888-672-8929 FAX: (888) 672-8024 FAX: (888) 672-8024 www.firegearoutdoors.comH A www.firegearoutdoors.com C

H TOP VIEW G A FPB-19RBSMT-N B FPB-20SBSMT-P FPB-20SBSMT-N FPB-33RBSMT-N C DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0" WC FOR NATURAL H FPB-26SBSMT-N FPB-26SBSMT-P GAS (NG) AND 11.0"FPB-25RBSMT-N WC FOR LIQUID PROPANEFPB-25RBSMT-P (LP) AT THE BURNER F TOP VIEW D G ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO E FPB-29RBSMT-N FPB-29RBSMT-P A FPB-32SBSMT-N FPB-32SBSMT-P H AFFECT BTU'S. AS A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM B FPB-33RBSMT-N FPB-33RBSMT-P THE LISTED BTU SPECIFICATIONS. C DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0" WC FOR NATURAL FPB-38SBSMT-N FPB-38SBSMT-P CLEARANCE TO COMBUSTIBLES FRONT VIEW GAS (NG) AND 11.0" WC FOR LIQUID PROPANE (LP) AT THE BURNER F D CLEARANCE TO A CLEARANCE OVERALL CLEARANCE TO A TO TOP VIEW G ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPEMIN SIZING WILL ALSOINSIDE PAN OUTSIDE DIM. - MAX E APPLIANCE COMBUSTIBLE FLOOR COMBUSTIBLE A COMBUSTIBLE A AFFECT BTU'S. AS A RESULT YOUR BTU'S MAY VARY SLIGHTLY MODEL PAN DIM. DEPTH (INCLUDING LIP) CUT OUT DIM. FROM B SIDEWALL HEIGHT CEILING TOP VIEW C THE LISTED BTU SPECIFICATIONS. A G FROM THE LIP OF THE PAN B D CLEARANCE TO FRONT DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0" WC FOR NATURAL E C VIEW F G COMBUSTIBLES H A GAS (NG) AND 11.0" WC FOR LIQUID PROPANE (LP) AT THE CLEARANCE14"TO A CLEARANCE CLEARANCE TO A F57"TO D15 1/2" FPB-16RBSMT-N 18 1/2" 16 1/2" - 17 BURNER 1/4" 6 3/8" B INSIDE16" PAN2 1/2"DOVERALL OUTSIDE DIM. MIN -SIZING MAX WILL ORIFICE. FLEX LINE SIZE AND PROPER 14" 57" COMBUSTIBLE FLOOR COMBUSTIBLE A COMBUSTIBLE FPB-16RBSMT-P 18 1/2" GAS PIPE 16 1/2" - 17 1/4" 2 1/2"APPLIANCE 6 3/8" 15 E1/2" C ALSO 16" MODEL AS A RESULT PAN DIM. (INCLUDING LIP) MAY CUT19 OUT DIM. AFFECT YOUR VARY FROM 22"BTU'S 19"DEPTH 18"THE PAN F SIDEWALL 16" 54" FPB-19RBSMT-N 1/4"SLIGHTLY - 21 1/2" 2 3/4" HEIGHT 6 5/8" FROM THE LIP OF AIMER: BTU LISTINGS ARE BASED ONBTU'S. 7.0" WC FOR NATURAL CEILING OUTSIDE CLEARANCEF TO CLEARANCE CLEARANCE A 22" LISTED BTU AT SPECIFICATIONS. FPB-19RBSMT-P 19 B 1/4" - 21 1/2" C 19" D 2 3/4" 18"A G) AND 11.0" WC FOR LIQUIDTHE PROPANE (LP) THE BURNER CLEARANCE TO COMBUSTIBLES FRONT E 6 5/8" VIEW G 16" H 54" FPB-25RBSMT-N 25 1/4" 27 1/2" 16" 25" 2 1/2" 2 3/4"OVERALL 6 5/8" COMBUSTABLE TO A 14" 19"TO A CLEARANCE TO A57" 69"TO E. FLEX LINE SIZE AND PROPER GAS PIPEDIM. SIZING WILL 18 ALSO FPB-16RBSMT-N 1/2"28" 16 1/2" - 17 -1/4" 6 3/8" 15 1/2"18"TO A CLEARANCE OVERALL CLEARANCE 18" 19" COMBUSTABLE FPB-25RBSMT-P 25 -1/4" -1/4" 27 1/2" 2E3/4" 6 5/8" OUTSIDE INSIDE T BTU'S. AS A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM 16" 25" 14" 57" 69" FPB-16RBSMT-P 18 1/2"28" 16MIN 1/2" - MAX 17 2PAN 1/2" 6 3/8" 15 1/2" (INCLUDING MIN -DIM. MAX CUT INSIDE PAN APPLIANCE FLOOR FROM THE COMBUSTABLE CLEARANCE TO COMBUSTIBLES FRONT VIEW COMBUSTIBLE FLOOR COMBUSTIBLE A COMBUSTIBLE 29"DEPTH FPB-29RBSMT-N 30" - DIM. 31 2 3/4"APPLIANCE 6 5/8" MODEL 22"32 1/4" 19"DIM. 18" 18" 16" 19" 54" 69" 19 1/4"OUT - 21 1/2"3/8"PAN 2 3/4" 6 5/8" STED BTU SPECIFICATIONS. FPB-19RBSMT-N CUT (INCLUDING LIP) LIP) OUT DIM. PAN DIM. DEPTH HEIGHT LIPTHE OF LIP PAN CEILING SIDEWALL HEIGHT CEILING FPB-29RBSMT-P - 31 6 5/8" FROM 18"THE PANSIDEWALL FPB-19RBSMT-P 22" 1/2"3/8" 19" 18" OF 16" 19" 54" 69" B- 21 C 29" 2 3/4" D 2 3/4" 6 5/8" A32 1/4" 19 1/4"30" E F G H 69" OVERALL CLEARANCE TO A CLEARANCE TO A CLEARANCE TO FPB-33RBSMT-N 36 1/4" 34" 35 1/4" 33" 2 3/4" 6 5/8" 18" 19" MODEL A B C D E F G H FPB-25RBSMT-N 28" 25 1/4" - 27 1/2" 25" 2 3/4" 6 5/8" 18" 19" 69" MIN MAX INSIDE OUTSIDE DIM. PAN 14" 19" 57" FPB-16RBSMT-N 1828" 1/2" 1/2" -- 17 1/4" 1/2" 6 5/8" 3/8" 1518" 1/2"18"A COMBUSTIBLE 19" FPB-33RBSMT-P 36 1/4" 16 34" - 35 1/4" 16" 33" 22 3/4" 2 3/4"FLOOR 6 5/8" COMBUSTIBLE 69" APPLIANCE COMBUSTIBLE 25" 69" FPB-25RBSMT-P 25 1/4" 27 1/2" 6 MODEL FPB-20SBS16MT-N DIM. -DEPTH (INCLUDING LIP) CUT DIM. PAN 22”OUT X 22” 20BTU 1/4” 21 3/4” 20" FROM 3/4" 6665/8” 18” 96" 57" 16" 14" FPB-16RBSMT-P 18 1/2" 1630" 1/2"- HEIGHT - 173/8" 1/4" 1/2" 3/8" 1518" 1/2" SIDEWALL LIP OF THE PAN CEILING36” 19" 29" 2 THE 69" FPB-29RBSMT-N 32 1/4" 31 22 3/4" 5/8" MODEL DFACTORY A B C ORFICE BTU OUTPUT CONVERSION PRESSURE GAS TYPE19" NG GAS TYPE LP 19" 18" 16" 54" FPB-19RBSMT-N 1930" 1/4"- 31 - 21 1/2" 3/4"F 5/8" FPB-29RBSMT-P 3222" 1/4" 3/8" 29" 22 3/4" 66 5/8" 18" 69" E G H SPECIFICATIONS FPB-26SBS22MT-N 28” X 28” 26 1/4” 27 3/4” 26" 2 3/4" 6 5/8” 18" 36” 96” FPB-19RBSMT-P 22" 19 1/4" 21 1/2" 19" 2 3/4" 6 5/8" 18" 16" 54" FPB-33RBSMT-N 36 1/4" 34" 35 1/4" 33" 2 3/4" 6 5/8" 18" 19" 69" 22" X 22" 20" 16" MIN. INLET 54" 5.0" WC 2 3/4" 20SBSMT-N 20 1/4" - 21FPB-16RBSMT-N 3/4" 6 5/8" #35 45,000 18" LPK#47 10.5" WC FPB-25RBSMT-N 1/4"- 35 -627 1/2" 25" 3/4" 5/8" 18" 19" 69" 1/4" 2 3/4"2534" 1/4" 33" 22 3/4" 66 5/8" 18" 19" 18" 20SBSMT-P 22" X 22" FPB-33RBSMT-P 20 1/4" - 21FPB-16RBSMT-P 3/4" 3628" 5/8" 20" 16" MAX. #47 45,500 INLET 54" 10.5" WC 13.0" WC 69" 25" 2 3/4" 18" 19" 69" FPB-32SBS31MT-N 34” 3228" 1/4” - 233 3/4” 32" 665/8” 25 1/4"#29 -627 1/2" 2 3/4" 5/8" 26SBSMT-N 5/8" 28" X 28" FPB-25RBSMT-P 2634” 1/4" X - MODEL 27 3/4" BTU 26" 3/4" 18" 19" 18" FPB-19RBSMT-N 65,000 LPK#41 NORMAL INLET 69" 36” 7.0" WC 11.0" 96” WC 18" 1/4" FACTORY -#41 31 3/8" BTU29" 2 3/4" 6 5/8" GAS OUTPUT 26SBSMT-P 28" X 28" FPB-29RBSMT-N 26 1/4"SPECIFICATIONS - 27FPB-19RBSMT-P 3/4" 3226" 6 5/8" 2 3/4" 30" ORFICE 18" CONVERSION 69" TYPE NG19" GAS TYPE LP 69" 19"PRESSURE 65,000 1/4" 30" -#29 31 3/8" 29" 65,000 2 3/4" 5/8" FPB-38SBS36MT-N X 40” 3832" 1/4” - 239 3/4” 38" 2 3/4" 665/8” 18"18" 36” 19" 96” 69" LPK#41 34" X 34" FPB-29RBSMT-P 18" 19"MIN. 69" 32SBSMT-N 6 5/8" 3/4" 3240” 1/4"FPB-16RBSMT-N - 33 3/4" 32 FPB-25RBSMT-N 45,000 LPK#47 INLET 5.0" WC 19" 10.5" WC 1/4" 2 3/4" #35 34" -#41 35 1/4" 33" 65,000 2 3/4" 6 5/8" 69" 34" X 34" FPB-33RBSMT-N 18" 19"MAX.18" 69" 32SBSMT-P 32 1/4"FPB-16RBSMT-P - 33FPB-25RBSMT-P 3/4" 3632" 6 5/8" INLET 10.5" WC 13.0" WC #47 45,500 1/4" products 34" -#29 35 1/4" 33" 2 3/4" 6You 5/8" 18" 19" 69" 38SBSMT-N 6 5/8" 40" X 40" FPB-33RBSMT-P 38 1/4"FPB-19RBSMT-N - 39FPB-29RBSMT-N 3/4" 36These 38" 2 3/4" #29 18" 19" 69" 65,000 LPK#41 are only sold as Natural Gas. must purchase an LP NORMAL INLET 7.0" WC 11.0" WC 65,000 LPK#41 38SBSMT-P 40" X 40" 38 1/4"FPB-19RBSMT-P - MODEL 39FPB-29RBSMT-P 3/4" BTU38" 6 5/8" 2 3/4" #41 #41 18" 19" 69" 65,000 Conversion Kit to BTU convert the prodcut to Liquid Propane.

65,000 FACTORY ORFICE OUTPUT CONVERSION PRESSURE GAS TYPE NG GAS TYPE LP FPB-33RBSMT-N 65,000 LPK#41 SPECIFICATIONS LPK#41 FPB-25RBSMT-N #29 #29 65,000 FPB-16RBSMT-N #35 45,000 LPK#47 MIN. INLET 5.0" WC 10.5" WC FPB-33RBSMT-P 65,000 FPB-25RBSMT-P #41 #41 65,000 MODEL BTU CONVERSION NOTES: FPB-16RBSMT-P #47 45,500 PRESSURE LPK#41 13.0" WC FPB-29RBSMT-N #29 65,000 FACTORY ORFICE BTU OUTPUT GAS TYPE NG MAX. GASINLET TYPE LP 10.5" WC 1. ALL FIRE PIT INSTALLATIONS SHOULD ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. SPECIFICATIONS KIT NO.PROVIDE FPB-19RBSMT-N #29 65,000 LPK#41 NORMAL INLET 7.0" WC 11.0" WC 65,000 FPB-29RBSMT-P #41 PART 2. THESE FIRE PIT MODELS#41 ARE SHIPPED AS NATURAL MUST BE CONVERTED #29 FPB-33RBSMT-N 65,000 LPK#41 MIN.AND INLET 65,000 GAS FPB-20SBSMT-N FPB-19RBSMT-P #29 65,000 LPK#415.0" WCTO LP GAS. 10.5" WC CONVERSION 3. ALL FIRE 65,000 PITS REQUIRE INCHES OF65,000 CROSSMAX. FLOWINLET VENTILATION SIDE LPK#41PER FPB-20SBSMT-P #41 FPB-33RBSMT-P 10.5" WCOF ENCLOSURE. 13.0" WCGAS TYPE NG MODEL FACTORY ORIFICE BTU 18-SQUARE OUTPUT PRESSURE GAS TYPE LP FPB-25RBSMT-N #29 #41 KIT 65,000 PART N0. INSTALLING 4. ALWAYS ADHERE STATE AND LOCAL CODES WHEN PITS .

65,000 TO YOUR#41 FPB-26SBSMT-N LPK#41 #29NOTES: NORMAL INLET FIRE 7.0" WC 11.0" WC FPB-25RBSMT-P 65,000 5.

DRAWINGS NOT TO SCALE. #411.FPB-29RBSMT-N 65,000 FPB-26SBSMT-P #29 65,000 TO THE VALVE SYSTEMS LPK#41 AS WELL AS GAS CONNECTIONS. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS 6.#31 THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN FOR PLANNING PURPOSES FPB-20SBS16MT-N #292.FPB-29RBSMT-P 60,000 OAS-LP45 MIN.TOINLET 5.0"PROFESSIONALS WC 10.5" WC LPK#41 65,000 FPB-32SBSMT-N 65,000 #41 THESE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE CONVERTED LP GAS. ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. #413.FPB-33RBSMT-N FPB-32SBSMT-P #29 65,000 LPK#41 ALL#45 FIRE PITS65,000 REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PERMAX. SIDE OFINLET ENCLOSURE. FPB-20SBS16MT-P 55,000 10.5" WC 13.0" WC 7. ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT #294.FPB-33RBSMT-P 65,000 FPB-38SBSMT-N #41LPK#41 65,000 ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS .

MANUFACTURER TO BE CONSIDERED ACCURATE. 65,000 NOTES: FPB-38SBSMT-P DRAWINGS TO SCALE.100,000 FPB-26SBS22MT-N #415. #22 NOT OAS-LP35 NORMAL INLET 7.0" WC 11.0" WC FPB-16RBSMT-P FPB-29RBSMT-P FPB-19RBSMT-P FPB-33RBSMT-P

BTU SPECS

GAS PRESSURE

8. CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER 1.

ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS ASCONSULTANTS WELL AS GAS CONNECTIONS. 6. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES REFERENCE NUMBER 5053-017.

FPB-26SBS22MT-P #35 99,000 - AND MUST BE CONVERTED TO LP GAS. 2. ONLY. THESE FIREDRAWING PIT MODELS NATURAL GAS THIS MAYARE NOTSHIPPED BE USED AS FOR CONSTRUCTION. NOTES: THESE FIRE PITS 3. ALLPROVIDE FIRE PITS REQUIRE INCHES FLOW PER SIDE OFBUT ENCLOSURE. 7.

INFORMATION CONTAINED HEREIN WAS OF CURRENT AT THEVENTILATION TIME OF DEVELOPMENT MUSTBTU BE REVIEWED AND APPROVED

BY THE PRODUCT 1. ALL FIRE PIT INSTALLATIONS SHOULD ACCESS TO 18-SQUARE THE VALVE SYSTEMS ASCROSS WELL AS GAS CONNECTIONS. DISCLAIMER: LISTINGS ARE BASED ON 7.0” WC ARE FORTESTED TO FPB-32SBS31MT-N #08 160,000 OAS-LP29 4. MANUFACTURER ALWAYS ADHEREGAS TO BE YOUR STATE LOCAL CODES WHEN INSTALLING FIRENATURAL PITS .

TO CONSIDERED ACCURATE. 2. THESE FIRE PIT MODELS ARE SHIPPED AS NATURAL AND MUST BEAND CONVERTED TO LP GAS. GAS (NG) AND 11.0” WC FOR LIQUID PROPANE ANSI Z21.97-2014 / 5.

DRAWINGS NOT TO SCALE. 8.

CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER 3. ALL FIRE PITS REQUIRE 18-SQUARE INCHES FPB-32SBS31MT-P #41OF CROSS FLOW VENTILATION 150,000 PER SIDE OF ENCLOSURE. (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND CSA 2.41-2014 THIS DRAWING ISWHEN INTENDED FOR USE

BY PITS ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES REFERENCE NUMBER 5053-017.

4. ALWAYS ADHERE TO YOUR STATE6.AND LOCAL CODES INSTALLING FIRE .

ROUND STAINLESS STEEL MT BURNER SYSTEMS PROPER GAS PIPE SIZING WILL ALSO AFFECT BTU’S. AS THESE FIRE PITS STANDARDS. FPB-38SBS36MT-N #03 183,000 OAS-LP25 ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. 5. DRAWINGS NOT TO SCALE. A RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE ARE TESTED TO 7.

ALL INFORMATION CONTAINED CONTRACTORS, HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED

BY THE PRODUCT 6. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES 5053-017 REVISION DATE 05/26/201 FPB-38SBS36MT-P #41 182,000 ACCURATE. LISTED BTU SPECIFICATIONS. MANUFACTURER TO BE CONSIDERED ANSI Z21.97-2014 / ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. 8. BY CONTRACTOR'S FOR PRODUCT AND COMPANY VISIT www.CADdetails.com/info ENTER 7. ALL INFORMATION CONTAINED HEREIN WAS CURRENTNOTE: AT THE TIME OF DEVELOPMENT BUTINFORMATION MUST BE REVIEWED AND APPROVED BY THEAND PRODUCT PROTECTED COPYRIGHT ©2016 CADDETAILS.COM LTD. CADdetails.co CSA 2.41-2014 5053-017.

ROUND STAINLESS STEEL MT BURNER SYSTEMS MANUFACTURER TO BE CONSIDEREDREFERENCE ACCURATE. NUMBER STANDARDS. THESE FIRE PITS 8. CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER AREDATE TESTED TO 5053-017 REVISION 05/26/2016 REFERENCE NUMBER 5053-030.

ROUND BURNER SYSTEMS

ROUND BURNER SYSTEMS

OPTIONAL ACCESSORIES ROUND BURNER SYSTEMS PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD. OAS-LP45 SQUARE Propane Conversion KitSYSTEMS (Orifice/Air 16” Burning BURNER ROUND STAINLESS Shutter) STEEL MTfor BURNER SYSTEMSSpur, 55,000 Btu OAS-LP35

Propane Conversion Kit (Orifice/Air Shutter) for 22” Burning Spur, 99,000 Btu 5053-017 STAINLESS STEEL MT BURNER SYSTEMS SQUARE Propane Conversion Kit (Orifice/Air Shutter) for 31” Burning Spur, 150,000 Btu PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD. OAS-LP25 Propane Conversion Kit (Orifice/Air Shutter) for 36” Burning Spur, 182,000 Btu TED BY COPYRIGHT ©2016 CADDETAILS.COM LTD.(2) 6” tall x 12” wide vents with mounting screws VENT-KIT-6X12 Includes two OAS-LP29

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

THESE FIRE PITS ARE TESTED TO ANSI Z21.97-2014 / CSA 2.41-2014 STANDARDS.

REVISION DATE 06/09/2016

ANSI Z21.97-2014 / CADdetails.com CSA 2.41-2014 STANDARDS.

REVISION DATE 05/26/2016 CADdetails.com

CADdetails.com

This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

35

NATURAL GAS: FPB-44DBSMT-N FPB-34DBSMT-N

NON-LISTED S. APPLICATION.DISC THESE ARE NOT SYSTEMS FIELD MT

FPB-44DBSMT-N

LP GAS: FORT WAYNE, IN 46809 FPB-44DBSMT-P A FPB-34DBSMT-P TOLL FREE: 1-888-672-8929

FAX: (888) 672-8024 www.firegearoutdoors.com

FPB-44DBSMT-P

LECT DESIRED SYSTEM:

H LP GAS:

NATURAL GAS:

A

N PROFESSIONALS FOR PLANNING PURPOSES FPB-34DBSMT-N FPB-34DBSMT-P

G H

TOP VIEW

FPB-44DBSMT-N FPB-44DBSMT-P AND APPROVED BY THE PRODUCT

TOP A VIEW B

DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0" WC FOR THESE FIRE PITS NATURAL (NG) AND AREGAS TESTED TO 11.0" WC FOR LIQUID PROPANE (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE ANSI Z21.97-2014 / DISCLAIMER: BTU LISTINGS AREASBASED ON 7.0" WCBTU'S FOR SIZING WILL 2.41-2014 ALSO AFFECT BTU'S. A RESULT YOUR CSA NATURAL GAS (NG)FROM AND 11.0" FORBTU LIQUID PROPANE (LP) AT MAY VARY SLIGHTLY THE WC LISTED SPECIFICATIONS. STANDARDS. THE BURNER ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING DATE WILL ALSO AFFECT BTU'S. AS A RESULT YOUR BTU'S REVISION 06/09/2016 MAY VARY SLIGHTLY FROM THE LISTED BTU SPECIFICATIONS.

A B H FRONT VIEW

G C

G F

DC

F

CLEARANCE TO COMBUSTIBLES FE

D

CLEARANCE COMBUSTIBLES VIEW CLEARANCE TO A TOCLEARANCE CLEARANCE TO A TO DIM. FROM BOTTOM FRONT CADdetails.com MIN - MAX HEIGHT OUTSIDE TOP VIEW COMBUSTIBLE A COMBUSTIBLE OF DISC TO BOTTOM COMBUSTIBLE FLOOR MODEL DIM. SPUR VIEW DIM. OF SPUR SIDEWALL CEILING OF APPLIANCE GFROM THE LIP OF THE PAN A B C CLEARANCE TO A CLEARANCE CLEARANCE TO A TO DIM. FROM F G H D BOTTOM MIN - MAXA HEIGHT OUTSIDE FLOOR COMBUSTIBLE ACLEARANCE COMBUSTIBLE DIM. CLEARANCE TO A TOFROM BOTTOM COMBUSTIBLE 34" 24" -VIEW 34" DIM. OF 1" SPUR OF DISC 3 7/8" 19" 18" 69" TU LISTINGS ARE BASED ONFPB-34DBSMT-N 7.0" WCMODEL FOR DIM. SPUR C B SIDEWALL THE18" LIP OF THE PAN CEILING OF3APPLIANCE 34" A 24" - 34" 1" 19" TO A 69" FPB-34DBSMT-P 7/8" OF DISC FROM BOTTOM COMBUSTABLE TO A F CLEARANCE NG) AND 11.0" WC FOR LIQUID PROPANE (LP) AT B C 44" 24" 44" 1" 18" F 69"H D FPB-44DBSMT-N 3 7/8" 19"G RIFICE. FLEX LINE SIZE AND PROPER GAS PIPE OUTSIDE MIN MAX HEIGHT TO BOTTOM OF FLOOR FROM THE COMBUSTABLE COMBUSTABLE FPB-34DBSMT-N - 34" 3 7/8" 44"34" 24"24" - 44" 1" 1" 18"18" 69"69" FPB-44DBSMT-P 3 7/8" 19"19" D O AFFECT BTU'S. AS A RESULT YOUR BTU'S DIM. SPUR VIEW APPLIANCE LIP OF18"PAN SIDEWALL CEILING 69" 34" 24"DIM. - 34" OF SPUR 1" 19" 3 7/8" FPB-34DBSMT-P HTLY FROM THE LISTED BTU SPECIFICATIONS. 44" - 44" VIEW C1" 69" 3 7/8" MODEL FPB-44DBSMT-N A B 24"FRONT D CLEARANCE TO COMBUSTIBLES E18" F 19" G 3 7/8" FPB-44DBSMT-P 19" 44" 24" - 44" 1" 18" 69"

T-N T-P T-N T-P

FPB-29DBS22MT-N MODEL 29”BTU 24” - 34” 1" 3 7/8” 18" 36” 96” CLEARANCE TO A CLEARANCE TO A CONVERSION DIM. FROM BOTTOMORFICECLEARANCE FACTORY BTU OUTPUT PRESSURE TOGAS TYPE NG GAS TYPE LP MIN - MAX SPECIFICATIONS HEIGHT OUTSIDE KIT PART NO. COMBUSTIBLE A COMBUSTIBLE OF DISC TO BOTTOM COMBUSTIBLE FLOOR #29 65,500 LPK#41 MIN. INLET 5.0" WC 10.5" WC DIM. SPUR VIEW DIM. FPB-34DBSMT-N OF SPUR SIDEWALL FROM THE1" LIP OF THE PAN3CONVERSION CEILING OF APPLIANCE MODEL BTU FPB-34DBS22MT-N 34” 24” 34” 7/8” 18" 36” #41 65,000 MAX. INLET 10.5"TYPE WC NG GAS 13.0"TYPE WC 96” FPB-34DBSMT-P A B C PRESSURE GAS LP FACTORY ORFICE BTU OUTPUT F KIT PARTGNO. SPECIFICATIONS D 65,500 #29 FPB-44DBSMT-N LPK#41 NORMAL HINLET 7.0" WC 11.0" WC 18" 34" 24" - 34" 1" 3 7/8" 19" 69" FPB-34DBSMT-N LPK#41 MIN. INLET 5.0" WC 10.5" WC #29 65,500 #41 65,000 FPB-44DBSMT-P 34"FPB-34DBS31MT-N 24" - 34" 1" 34” 3 7/8" MAX.69" INLET 10.5" WC 13.0" WC96” #41 24” - 34” 1"18"65,000 3 7/8” 19" 18" 36” FPB-34DBSMT-P 44" 24" - 44" 1" 18" 69" 19" 3 7/8" 65,500 FPB-44DBSMT-N LPK#41 #29 NORMAL INLET 7.0" WC 11.0" WC NOTES: 19" 44" 24" - 44" 1" 18"65,000 69" 3 7/8" #41 FPB-44DBSMT-P 1. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. FPB-44DBS36MT-N 44” 24” - 44” 1” 3 7/8” 18" 36” 96” 2. THESE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE CONVERTED TO LP GAS.

3. NOTES: ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. 4. 1.ALWAYS ADHERE TO YOUR STATESHOULD AND LOCAL CODES WHEN INSTALLING FIRE PITS . AS WELL AS GAS CONNECTIONS. ALL FIRE PIT INSTALLATIONS PROVIDE ACCESS TO THE VALVE SYSTEMS TheseARE products areNATURAL only sold as Natural Gas. YouTOmust purchase an LP CONVERSION DEL BTU NOTPIT TO MODELS SCALE. THESE FIRE SHIPPED AS GAS AND MUST BE CONVERTED LP GAS. PRESSURE GAS TYPE NG GAS TYPE LP FACTORY ORFICE5. 2.DRAWINGS BTU OUTPUT Conversion KitCROSS to ENGINEERS, convert the prodcut toCONSULTANTS Liquid Propane.

6. 3.THIS INTENDED FOR USE BY ARCHITECTS, CONTRACTORS, AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES KIT PART NO. IFICATIONS ALLDRAWING FIRE PITSISREQUIRE 18-SQUARE INCHES OF FLOW VENTILATION PER SIDE OF ENCLOSURE. THIS ADHERE DRAWINGTOMAY NOTSTATE BE USED CONSTRUCTION. LPK#41 MIN. WHEN INLETINSTALLING 5.0"FIRE WCPITS .

10.5" WC #29 65,500 34DBSMT-N 4.ONLY. ALWAYS YOUR ANDFOR LOCAL CODES 7. 5.ALLDRAWINGS INFORMATION ATINLET THE TIME OF DEVELOPMENT BUT MUST MAX. 10.5" WC 13.0"BE WCREVIEWED AND APPROVED BY THE PRODUCT #41 65,000 NOT CONTAINED TO SCALE. HEREIN WAS CURRENT 34DBSMT-P BE CONSIDERED ACCURATE. 6.MANUFACTURER THIS DRAWINGTO IS INTENDED FOR USE

BY ARCHITECTS, CONTRACTORS, CONSULTANTS 65,500 NORMALENGINEERS, INLET 7.0" WC 11.0" WC AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES #29 44DBSMT-N LPK#41 8. CONTRACTOR'S NOTE: FOR AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER ONLY. THIS DRAWING MAYPRODUCT NOT BE USED FOR CONSTRUCTION. #41 65,000 44DBSMT-P NUMBERCONTAINED 5053-039. HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT 7.REFERENCE ALL INFORMATION THESE FIRE PITS MANUFACTURER TO BE CONSIDERED ACCURATE. ARE TESTED TO 8. CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER CONVERSION FIRE PIT INSTALLATIONS SHOULD PROVIDEREFERENCE ACCESS TONUMBER THE VALVE SYSTEMS AS WELL AS GAS CONNECTIONS. ANSI Z21.97-2014 / 5053-039.

MODEL FACTORY ORIFICE BTU OUTPUT PRESSURE GAS TYPE NG GASTHESE TYPE LP PITS FIRE SE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE CONVERTED TO LP GAS. KIT PART NO. CSA 2.41-2014 ARE TESTED TO FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOWFLAT VENTILATION PER SIDE OFSTEEL ENCLOSURE. DISC STAINLESS MT BURNER SYSTEMS STANDARDS. AYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS .

ANSIWC Z21.97-2014 / FPB-29DBS22MT-N #22 100,000 OAS-LP35 MIN. INLET 5.0" WC 10.5" WINGS NOT TO SCALE. 5053-039 REVISION DATE 05/25/2016 CSA 2.41-2014 S DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONSULTANTS AND DESIGN -SYSTEMS PROFESSIONALSMAX. FOR PLANNING FPB-29DBS22MT-P #35FLATCONTRACTORS, 99,000 INLET PURPOSES 10.5" WC 13.0" WC DISC STAINLESS STEEL MT BURNER STANDARDS. PROTECTED BYFOR COPYRIGHT ©2016 CADDETAILS.COM LTD. CADdetails.com Y. THIS DRAWING MAY NOT BE USED CONSTRUCTION. FPB-34DBS22MT-N #22 100,000 OAS-LP35 NORMAL INLET 7.0" WC 11.0"DATE WC 05/25/2016 INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT 5053-039 REVISION UFACTURER TO BE CONSIDERED ACCURATE. FPB-34DBS22MT-P #35 99,000 PROTECTED COPYRIGHT ©2016 VISIT CADDETAILS.COM LTD. AND ENTER CADdetails.com TRACTOR'S NOTE: FOR PRODUCT ANDBY COMPANY INFORMATION www.CADdetails.com/info DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0” WC FOR ERENCE NUMBER 5053-039.

FPB-34DBS31MT-N #08 160,000 OAS-LP29

BTU SPECS

GAS PRESSURE FLAT DISC BURNER SYSTEMS

FLAT DISC BURNER SYSTEMS

FLAT DISC BURNER#03SYSTEMS183,000 FPB-44DBS36MT-N FPB-34DBS31MT-P

#29

FLAT DISC STAINLESS STEEL MT BURNER FPB-44DBS36MT-P #25 SYSTEMS

150,000

182,000

OPTIONAL ACCESSORIES

OAS-LP25 -

THESE FIRE PITS NATURAL GAS (NG) AND 11.0” WC FOR LIQUID PROPANE ARE TESTED TO FLEX LINE SIZE AND (LP) AT THE BURNER ORIFICE. ANSI Z21.97-2014 / PROPER GAS PIPE SIZING WILL ALSO AFFECT BTU’S. AS CSA 2.41-2014 A RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE STANDARDS. LISTED BTU SPECIFICATIONS. REVISION DATE 05/25/2016

YRIGHT ©2016 CADDETAILS.COM LTD.

36

CADdetails.com

OAS-LP35

Propane Conversion Kit (Orifice/Air Shutter) for 22” Burning Spur, 99,000 Btu

OAS-LP29

Propane Conversion Kit (Orifice/Air Shutter) for 31” Burning Spur, 150,000 Btu

OAS-LP25

Propane Conversion Kit (Orifice/Air Shutter) for 36” Burning Spur, 182,000 Btu

VENT-KIT-6X12

Includes two (2) 6” tall x 12” wide vents with mounting screws

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

SELECT DESIRED SYSTEM: NATURAL GAS: LOF30MT-N

SELECT DESIRED SYSTEM: SELECT DESIRED NATURAL GAS: SYSTEM:

GAS: FPB-L24MT-N NON-LISTED NATURAL LOF36MT-N LOF30MT-N FPB-L30MT-N D SYSTEM: LINE OF FIRE SYSTEMS LOF30MSI-N LOF36MT-N

:

A E

DISCLAIMER: BTU LISTINGS ARE FPB-L36MT-N BASED ON 7.0" WC FOR NATURAL GAS LOF30MSI-N LP GAS:

LOF36MSI-N

www.firegearoutdoors.com F B

TOLL FREE: 1-888-672-8929 FAX: (888) 672-8024 TOP VIEW www.firegearoutdoors.com

(NG) AND 11.0" WC FOR LIQUID PROPANE (LP) AT THE BURNER LOF36MSI-N A FPB-L24MT-P E ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO AFFECT FPB-L30MT-P TOP VIEW BTU'S. AS A RESULT YOUR BTU'S MAY FPB-L36MT-P VARY SLIGHTLY FROM THE LISTED F B BTU SPECIFICATIONS.

C AA E F

96" CEILING 36" SIDEWALL

D

C B

96" CEILING FB BD SIDE VIEW2"36" TYP. SIDEWALL

60°

6" FL TO BO OF

H 44"GCEILING 3"

96" CEILING

END VIEW 17" SIDEWALL 36" SIDEWALL

CLEARANCE TO COMBUSTIBLES

23"VIEW TYP. TOP 96" CEILING TOP VIEW C D IMER: BTU LISTINGS ARE DISCLAIMER: BTU LISTINGS ARE INSIDE PAN INSIDE PAN MIN/MAX CUT PAN OVERALL OVERALL MIN/MAX CUT OVERALL 6" FLOOR 1" FLOORHEIGHT ON 7.0" WC FOR NATURALBASED GAS ON 7.0" WC FOR NATURAL GAS C DF OUT LENGTH OUT WIDTH 36" E DEPTH DISCLAIMER: BTU LISTINGS ARE MODEL LENGTH OF PAN WIDTH OF PAN LENGTH WIDTH OFBOTTOM APPLIANCE TO BOTTOM TOP VIEW G D 11.0" WC FOR LIQUID (NG) AND 11.0" WC FOR LIQUID TO H 6" FLOOR SIDEWALL ON 7.0" WC FOR NATURAL GAS A B C D E G H OF PAN F NE (LP) AT THE BURNER BASED OF CRADLE 60° PROPANE (LP) AT TO BOTTOM G HH (NG) AND 11.0" WCTHE FORBURNER LIQUID E. FLEX LINE SIZE AND PROPER G 3" 8" 30" 6" 30 1/4" 6 1/2" 2 3/4" 4" LOF30MT-N 32 1/4" ORIFICE. FLEX LINE SIZE AND PROPER OF PAN PROPANE (LP) AT THE BURNER 60° PE SIZING WILL ALSO AFFECT LOF36MT-N 8" VIEW 36"CLEARANCE 6" TO COMBUSTIBLES 28 1/2" 7 1/8" 2 3/4" 4" GAS PIPEFLEX SIZING WILL ALSO AFFECT CLINE D SIDE VIEW 38 1/4" END ORIFICE. SIZE AND PROPER 3" ARE SIDE8"VIEW AS A RESULT YOUR BTU'S BTU'S. MAY AS A RESULT YOUR LOF30MSI-N 32 1/4" 30" 6" END VIEW30 1/4" CLEARANCE 6 1/2"TO COMBUSTIBLES 2 3/4" 4" BTU'S MAY 6" FLOOR GAS PIPE SIZING WILL ALSO AFFECT RAL GAS FROM THE LISTED LIGHTLY 36" 6"END VIEW 34 1/2" CLEARANCE 4" LOF36MSI-N 38 1/4" 7 1/8"TO COMBUSTIBLES 2 3/4" SIDE8"VIEW VARY SLIGHTLY FROM THE LISTED TO BOTTOM BTU'S. AS A RESULT YOUR BTU'S MAY GH D ECIFICATIONS. BTU VARYSPECIFICATIONS. SLIGHTLY FROM THE LISTED OF PAN R 60° BTU SPECIFICATIONS. PROPER 3" MIN/MAX MIN/MAX INSIDE PAN PAN OVERALL OVERALL INSIDE PAN MIN/MAX CUT MIN/MAX CUT INSIDE PAN OVERALL HEIGHT PAN OVERALL LENGTH WIDTH INSIDE PAN OVERALL HEIGHT AFFECT MODEL BTU OVERALL CONVERSION KIT CUT OUT CUT OUT DEPTH MODEL LENGTH OF PANMODEL WIDTH LENGTH WIDTH OUT LENGTH OUT WIDTH OF APPLIANCE OVERALL INSIDE MIN/MAX OVERALL CLEARANCE TO COMBUSTIBLES SIDE VIEWOF PAN END VIEW FACTORY ORFICE BTU OUTPUT PRESSURE GAS OVERALL TYPE NG HEIGHT GAS TYPE LP DEPTH OF CRADLE OF CRADLE LENGTH WIDTH OF APPLIANCE U'S MAY INSIDE PAN PAN OVERALL OVERALL INSIDE PAN MIN/MAX CUT MIN/MAX CUT PART NO. LENGTH LENGTH A B OFSPECIFICATIONS C D B PAN E INSIDE PAN F MIN/MAX G ECUT H F OUT LENGTH OVERALL CUT HEIGHT A G H STED DEPTH MODEL LENGTH OF PAN WIDTH OF#36 PAN LENGTH WIDTH OUT LENGTH OUT WIDTH OF APPLIANCE 45,000 MIN. INLET LOF30MT-N OAS-LP49 5.0" WC 10.5"OF WC C D F30MT-N 32 1/4" FPB-L24MT-N 8" 30" 6" 30 1/4" 6 1/2" 2 3/4" 4" MAX. INLET PAN WIDTH OF PAN LENGTH WIDTH OUT LENGTH WIDTH PAN DEPTH APPLIANCE LOF36MT-N OAS-LP41 #29 10.5" WC 75,000 A B C D E F G H 28 1/4" 6 7/8" 28 1/2" 7 1/8" 24" 6 3/8" 4 1/4" 4 3/4" 13.0" WC F36MT-N 38 1/4" FPB-L24MT-P 8" 36" 6" 1/2" 2 3/4" 4" LOF30MSI-N OAS-LP49 INLET 11.0" WC 45,000771/8" 28 1/4" 1/4" 6 8" 7/8"#36 2830" 1/2" D 1/8" 66NORMAL 3/8" 1/4" G7.0" WC 4 4" 3/4" H MODEL B C 28 E3024" F 6" 1/4" 1/2" 24 3/4" LOF30MT-N A8" 32 F30MSI-N 32 1/4" FPB-L30MT-N 30"MIN/MAX CUT 6" 30CUT 1/4" 2 3/4" 4" OAS-LP41 #29 75,000671/2" LOF36MSI-N INSIDE PAN INSIDE PAN ERALL OVERALL PAN MIN/MAX OVERALL HEIGHT 34 1/4" 6 7/8" 34 1/2" 1/8" 30" 6 3/8" 4 1/4" 4 3/4" LOF36MT-N 8" 38 1/4"36" 8" 36" 6" 28 1/2" 7 1/8" 2 3/4" 4" 6" 4" F36MSI-N 38OF 1/4" 34 1/2" 771/8" 2 3/4" FPB-L30MT-P 30" DEPTH 34 6 8" 7/8"OUT 3430" 1/2" 1/8" 66 3/8" 1/4" 4 4" 3/4" 4" TH OF PAN WIDTH PAN LENGTH OF LOF30MSI-N 32 1/4" 1/4" OUT 6" 1/4" 1/2" LOF30MT-N 32 1/4” WIDTH 8” LENGTH 30” WIDTH 6" 30APPLIANCE 1/2” - 30 31 3/4” 6 1/4” - 7 1/2” 24 3/4" 2 3/4” FPB-L36MT-N 40 1/4" 1/4" 6 8" 7/8" 4036" 1/2" G 7 6" 1/8" 67 3/8" 1/4" 4 4" 3/4" A B C D38 E F H 3436" 1/8" 24 3/4" LOF36MSI-N 1/2" FPB-L36MT-P 40 1/4" 6 7/8" 40 1/2" 7 1/8" 36" 6 3/8" 4 1/4" 4 3/4" 8" 30" 6" 30 1/4" 6 1/2" 2 3/4" 4" 2 1/4" NOTES: LOF36MT-N 38 1/4” 8” 36” 6” 36 1/2” 37 3/4” 6 1/4” 7 1/2” 2 3/4” 4” MODEL BTU 8 1/4" 8" 36" 6" 28MODELS 1/2" AREKIT 7 1/8" AS NATURAL 2 3/4" 4" CONVERTED TO LP GAS. THESE FIRECONVERSION PIT SHIPPED MUST BE PRESSUREGAS AND GAS TYPE NG GAS TYPE LP FACTORY ORFICE BTU1.OUTPUT 2SPECIFICATIONS 1/4" 8" 30" BTU 2. 6" 30PART 1/4" NO. 6 1/2" 2 3/4" FLOW VENTILATION CONVERSION KIT4" PER SIDE OF ENCLOSURE. MODEL ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS TYPE NG GAS TYPE LP FACTORY ORFICE BTU7OUTPUT MODEL CONVERSION KITWC 8" 36" BTU45,000 4" FIREPRESSURE 3. 6" ALWAYS ADHERE TO AND WHEN NO. INSTALLING PITS 10.5" .

MIN.CODES INLET 8 1/4" 34 1/2"YOUR STATE 1/8"LOCAL 2 3/4" 5.0" WC GAS #36SPECIFICATIONS OAS-LP49 LOF30MT-N PART FACTORY ORFICE BTU OUTPUT PRESSURE GAS TYPE NG GAS TYPE LP 32 1/4” 8” 30” 6” 30 1/2” 31 3/4” 6 1/4” 7 1/2” 2 3/4” 4” PART NO. 4.

ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO VALVE SYSTEMS AS WELL AS ALL GAS CONNECTIONS. MAX. INLET 75,000 10.5" WC 13.0" WC LOF36MT-NLOF30MSI-N#29SPECIFICATIONS OAS-LP41 FPB-L24MT-N MIN. INLET 5.0" WC 10.5" WC #42 35,000 LPK#50 45,000NORMAL INLET MIN.11.0" INLET LOF30MT-N 45,000 5.0" WC 10.5" WC WC #36 TO OAS-LP497.0" WC 5. DRAWINGS NOT SCALE. WC #36 FPB-L24MT-P LOF30MSI-N OAS-LP49 MAX. INLET 10.5" WC 13.0" #50 35,000 MAX. INLET LOF36MT-N 75,000 #29ISOAS-LP41 75,000 OAS-LP41 10.5" WC 13.0" WC WC FOR PLANNING PURPOSES 6. THIS DRAWING INTENDED FOR45,000 USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS ANDWC DESIGN PROFESSIONALS #29 FPB-L30MT-N LOF36MSI-N NORMAL INLET LPK#48 7.0" 11.0" #38 LOF30MSI-N #36 45,000 NORMAL WC 11.0" WC LOF36MSI-N 38CONVERSION 1/4” 6” OAS-LP49 36 1/2” - 37 3/4” INLET 6 1/4” - 77.0" 1/2” 2 3/4” 4” ONLY.KIT THIS8” DRAWING MAY NOT36” BE USED FOR CONSTRUCTION. FPB-L30MT-P #48 45,000 FACTORY ORFICE BTU OUTPUT GAS TYPE NG OAS-LP41 LPDEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT #29 PRESSURE 75,000 7. ALL CONTAINED HEREIN WAS CURRENT ATGAS THE TYPE TIME OF LOF36MSI-N LPK#44 FPB-L36MT-N #32 55,000 PART NO.INFORMATION MANUFACTURER TO BE CONSIDERED ACCURATE. 45,000 FPB-L36MT-P #44 MIN. INLET 55,0005.0" WC #36 OAS-LP49 10.5" WC 8. CONTRACTOR'S NOTE: FORare PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER These products only sold Gas. You must purchase an LP MAX. INLET OAS-LP41 10.5"as WCNatural 13.0" WC 75,000 NOTES: #29 NOTES: REFERENCE NUMBER 5053-056.

KitLPtoGAS. convert the prodcut to Liquid Propane.

1. THESE#36 FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST Conversion BE CONVERTED TO OAS-LP49 NORMAL INLET 7.0" WC 11.0" WC 45,000 1. THESE FIRE PIT MODELS ARE SHIPPED AS NATURAL GAS AND MUST BE CONVERTED TO LP GAS. NOTES: 2. ALL FIRE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. OAS-LP41 #29PITS REQUIRE 18-SQUARE 75,000 2. ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE.

LINE OF FIRE

THESE FIRE PIT MODELS ARE SHIPPED NATURAL GAS AND MUST BE CONVERTED TO LP GAS. ALWAYS ADHERE TO YOUR STATE1.AND LOCAL CODES WHEN INSTALLING FIREAS PITS .

3. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS .

2. ALLPROVIDE FIRE PITSACCESS REQUIRE INCHES CROSS FLOW PER SIDE OF ENCLOSURE. ALL FIRE PIT INSTALLATIONS SHOULD TO18-SQUARE VALVE SYSTEMS ASOF WELL AS ALL GASVENTILATION CONNECTIONS. 4. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO VALVE SYSTEMS AS WELL AS ALL GAS CONNECTIONS. 3. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS .

DRAWINGS NOT TO SCALE. LINE OF FIRE MT/MSI 5. DRAWINGS NOT TO SCALE. ALL PIT INSTALLATIONS PROVIDECONSULTANTS ACCESS TO VALVE AS WELL AS ALL GAS THIS DRAWING IS INTENDED FOR4.USE BYFIRE ARCHITECTS, ENGINEERS,SHOULD CONTRACTORS, ANDSYSTEMS DESIGN PROFESSIONALS FORCONNECTIONS. PLANNING PURPOSES 6. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES 5. USED DRAWINGS NOT TO SCALE. ONLY. THIS DRAWING MAY NOT BE FOR CONSTRUCTION. CONVERSION REVISION DELS ARE SHIPPED AS NATURAL GAS5053-056 AND MUST BE DRAWING CONVERTED TONOT LP GAS. ONLY. THIS MAY BE USED FOR CONSTRUCTION. 6. THIS DRAWING IS INTENDED FOR

BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS PURPOSES MODEL HEREIN FACTORY ORIFICE BTU OUTPUT PRESSURE GAS TYPEFOR NGPLANNING GAS TYPE LP DATE 06/0 7. ALL INFORMATION CONTAINED WAS CURRENT AT THE TIME OFUSE DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED

BY THE PRODUCT RE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PERCONTAINED SIDE OF ENCLOSURE. 7. ALL INFORMATION HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT KIT PART NO. ONLY. THIS DRAWING MAY NOT ©2016 BE USED FOR CONSTRUCTION. PROTECTED BY COPYRIGHT CADDETAILS.COM LTD. CADdetai MANUFACTURER TO BE CONSIDERED ACCURATE. YOUR STATE AND LOCAL CODES WHENMANUFACTURER INSTALLING FIRETO PITS BE. CONSIDERED ACCURATE. 7. ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THEAND TIMEENTER OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT 8. CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info LLATIONS SHOULD PROVIDE ACCESS VALVE SYSTEMS AS WELL ALL GASAND CONNECTIONS. 8. TO CONTRACTOR'S NOTE: FORAS PRODUCT COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER MANUFACTURER TO BE CONSIDERED ACCURATE. MIN. INLET 5.0" WC 10.5" WC LOF30MT-N #36 45,000 OAS-LP49 REFERENCE NUMBER 5053-056.

SCALE. REFERENCE NUMBER 5053-043.

8. CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER THESE FIRE PITS TENDED FOR USE BYLOF36MT-N ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES MAX. INLET 10.5" WC 13.0" WC #29 5053-056.

75,000 OAS-LP41 REFERENCE NUMBER ARE TESTED TO G MAY NOT BE USED FOR CONSTRUCTION. 7.0" WC 11.0" WC #36 OAS-LP49 ANSI Z21.97-2014 / ONTAINED HEREIN LOF30MSI-N WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE45,000 REVIEWED AND APPROVED

BY THE PRODUCT NORMAL INLET BE CONSIDERED ACCURATE. CSA 2.41-2014 LINE OF FIRE MT/MSI LOF36MSI-N #29 75,000 OAS-LP41 LINEAR MT BURNERAND SYSTEMS E: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info ENTER STANDARDS. DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0” WC FOR R 5053-056.

LINE OF FIRE MT/MSI

3.

4.

5.

6.

BTU SPECS

GAS PRESSURE

LINE OF FIRE LINEAR SERIES LINE OF FIRE

5053-043 COPYRIGHT ©2016 CADDETAILS.COM LTD. ©2016 CADDETAILS.COM LTD. 5053-056 PROTECTED

BY COPYRIGHT

NE OF FIRE

PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD. E OF FIRE MT/MSI

OPTIONAL ACCESSORIES

CADDETAILS.COM LTD. OAS-LP49

REVISION DATE 06/09/2016 REVISION 06/09/2016 NATURAL GAS (NG) AND 11.0” WC FOR LIQUIDDATE PROPANE CADdetails.com (LP) AT THE BURNER ORIFICE. FLEX LINE SIZE AND REVISION DATE 06/09/2016 CADdetails.com PROPER GAS PIPE SIZING WILL ALSO AFFECT BTU’S. AS CADdetails.com A RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE LISTED BTU SPECIFICATIONS. REVISION DATE 06/09/2016

CADdetails.com Propane Conversion Kit (Orifice/Air Shutter) for LOF-30 Series. 43,000 Btu

OAS-LP41

Propane Conversion Kit (Orifice/Air Shutter) for LOF-36 Series. 65,000 Btu

LID-LOF30

Linear stainless steel lid with brushed finish for the LOF-30 Series

LID-LOF36

Linear stainless steel lid with brushed finish for the LOF-36 Series

VENT-KIT-6X12

Includes two (2) 6” tall x 12” wide vents with mounting screws

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

37

AnF (Assemble and Finish)

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

SPECIFICATIONS

A

ROUND SERIES

C

MODEL

OVERALL DIAMETER A

OVERALL HEIGHT (TOP INSTALLED) B

MAXIMUM CUT OUT C

ANF-R42

42 1/4”

18 5/8"

21" B

ANF-R48

48 1/4”

18 5/8”

28 7/8"

ANF-R60

60 1/4”

18 5/8”

33 3/8"

AnF ROUND BURNER SYSTEM MATRIX ANF-R42 ANF-R48 ANF-R60

16” ROUND

19” ROUND

20” SQUARE

25” ROUND

26” SQUARE

29” ROUND

32” SQUARE

33” ROUND

Does this pan fit this AnF?

YES

YES

YES

NO

NO

NO

NO

NO

Does it require supports?

YES

NO

NO

NO

NO

NO

NO

NO

Does this pan fit this AnF?

NO

YES

YES

YES

YES

NO

NO

NO

Does it require supports?

NO

YES

YES

NO

NO

NO

NO

NO

Does this pan fit this AnF?

NO

NO

NO

YES

YES

YES

YES

YES

Does it require supports?

NO

NO

NO

YES

NO

NO

NO

NO

B

LINEAR SERIES

A C

E

B

D

A C

MODEL

LENGTH A

HEIGHT (TOP INSTALLED) B

DEPTH C

MAX CUT OUT WIDTH D

MAX CUT OUT LENGTH E

ANF-L48

48”

18 1/2”

24"

15 3/4”

44 1/2”

ANF-L66

66”

18 1/2”

24”

6 7/8”

62 1/2”

ANF-L74

74”

18 1/2”

24”

6 7/8”

70 1/2”

ANF-L96

96”

18 1/2”

24”

6 7/8”

89”

E

D

AnF LINEAR BURNER SYSTEM COMBINATION MATRIX All single Linear fire pit burner systems fit all Linear AnF’s, and all Linear fire pit burner systems require supports.

ANF-L66

38

fits

FPB-30L + FPB-24L FPB-24L + FPB-24L

ANF-L74

fits

FPB-36L + FPB-24L FPB-30L + FPB-30L

ANF-L96

fits

FPB-36L + FPB-36L FPB-36L + FPB-30L

A

SQUARE SERIES

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

C

B D

A

MODEL

LENGTH A

HEIGHT (TOP INSTALLED) B

MAX CUT OUT LENGTH C

MAX CUT OUT DEPTH D

ANF-S48

48”

18 1/2”

40 3/16”

44 1/2”

60”

18 1/2”

52 3/16”

56 1/2”

C

ANF-S60

D

All Fire Pit Burner Systems fit all square AnF’s, and all Fire Pit Burner Systems require supports

AnF ENCLOSURES & FIRE PIT BURNER COMBINATIONS AnF ROUND PACKAGES ANFR42-19RTFS-N

42” Round AnF with a 19” Round TFS System (Natural Gas)

ANFR42-19RTFS-P

42” Round AnF with a 19” Round TFS System (Propane)

ANFR48-19RTFS-N

48” Round AnF with a 19” Round TFS System (Natural Gas)

ANFR48-19RTFS-P

48” Round AnF with a 19” Round TFS System (Propane)

ANFR42-19RTMS-N

42” Round AnF with a 19” Round TMS System (Natural Gas)

ANFR48-19RTMS-N

48” Round AnF with a 19” Round TMS System (Natural Gas)

ANFR42-19RMT-N

42” Round AnF with a 19” Round MT System (Natural Gas)

ANFR48-19RMT-N

48” Round AnF with a 19” Round MT System (Natural Gas)

AnF LINEAR PACKAGES ANFL48-30LTFS-N

48” Linear AnF with a 30” L Series TFS System (Natural Gas)

ANFL48-30LTFS-P

48” Linear AnF with a 30” L Series TFS System (Propane)

ANFL48-30LMT-N

48” Linear AnF with a 30” L Series MT System (Natural Gas)

ANFL48-LOF30MT-N

48” Linear AnF with a 30” Line of Fire MT System (Natural Gas)

39

www.firegearoutdoors.com

BURNER SPECIFICATIONS

SELECT DESIRED MODEL: DBS-12K

DBS-12

DBS-16K

DBS-16

DBS-22K

DBS-22

BURNINGDBS-31 SPUR

DBS-31K

DBS-36K

DBS-36

B SIDE VIEW

A TOP VIEW KIT MODEL DBS-12K DBS-16K DBS-22K DBS-31K DBS-36K

SINGLE

ORIFICEOVERALL SIZE OVERALL WIDTH OVERALL HEIGHT ORIFICE SIZE OVERALL WIDTH HEIGHT ORIFICE SIZE ORIFICE SIZE BTU'S NG BTU'S SINGLE MODEL BTU’S NGLP A B NG A B NGLP LP 42,000 33,000 DBS-12 12 1/8" 1 7/8" OAS-NG38 OAS-LP52 DBS-16 15 7/8" OAS-NG31 1 7/8" 60,000 OAS-LP45 55,000 DBS-22 22 1/16" 1 7/8"12 1/8” OAS-NG22 1 7/8"100,000 OAS-LP35 99,000 DBS-12K DBS-12 OAS-NG38 42,000 OAS-LP52 160,000 150,000 DBS-31 30 7/8" OAS-NG08 1 7/8" OAS-LP29 35" 183,000 182,000 DBS-36 1 7/8" OAS-NG03 OAS-LP25

KIT MODEL MODEL

DBS-16K

DBS-16

15 7/8”

1 7/8”

OAS-NG31

60,000

BTU’S LP

33,000

OAS-LP45

55,000

DISCLAIMER: BTU LISTINGS ARE BASED ON 7" WC FOR NATURAL GAS (NG) AND 11" WC FOR LIQUID PROPANE (LP) AT THE BURNER DBS-22K DBS-22 22 1/16” OAS-NG22 100,000 OAS-LP35 ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO AFFECT BTU'S. 1AS7/8” A RESULT YOUR BTU'S MAY VARY SLIGHTLY FROM THE LISTED BTU SPECIFICATIONS.

99,000

DBS-31K DBS-31 30 7/8” 1 7/8” OAS-NG08 160,000 OAS-LP29 150,000 NOTES: 1. DESIGNER BURNING SPURS (DBS) ARE INDIVIDUAL SPUR BURNERS FOR INSTALLATION INTO A CUSTOM DESIGNED FIRE PIT. INSTALLATION REQUIRES A METAL PAN (NOT SUPPLIED) TO BE USED UNDERNEATH THE BURNING SPUR PER APPLICATION. DBS BURNERS COME AS AN INDIVIDUAL SPUR SUPPLIED WITH A 35”A BURNER ORIFICE, FLEX 1 7/8” OAS-NG03 183,000COVER AND OAS-LP25 182,000 BURNER ORIFICEDBS-36K (I.E. DBS-12) OR AS A KIT DBS-36 (I.E. DBS-12K) SUPPLIED WITH CONNECTOR, KEY VALVE, POLISHED CHROME A 8" POLISHED CHROME KEY. 2. ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. DISCLAIMER: BTU LISTINGS ARE BASED ONAS7.0” WC FOR NATURAL GAS (NG) AND 11.0” WC FOR LIQUID PROPANE 3. ALL INSTALLATIONS SHOULD PROVIDE ACCESS TO VALVE SYSTEMS AS WELL GAS CONNECTIONS. 4. ALWAYS ADHERE TO YOUR(LP) STATE LOCAL CODES ORIFICE. WHEN INSTALLING A CUSTOM PITPROPER WITH THE GAS DBS BURNERS .

ATAND THE BURNER FLEX LINE SIZEFIRE AND PIPE SIZING WILL ALSO AFFECT BTU’S. AS A 5. DRAWINGS NOT TO SCALE. RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE LISTED BTU SPECIFICATIONS. 6. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. 7. ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT MANUFACTURER TO BE CONSIDERED ACCURATE. 8. CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER REFERENCE NUMBER 5053-079.

LIQUID PROPANE ORIFICE

NATURAL GAS ORIFICE

BURNING SPUR & BURNING SPUR KITS BURNING SPUR & BURNING SPUR KITS REVISION DATE 06/09/2016

BY COPYRIGHT ©2016 CADDETAILS.COM LTD.

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

40

CADdetails.com

This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

FLEXFRAME SPECIFICATIONS

MODELS FLEXFRAME-SS

FEATURES Constructed of 16 Gauge 304 Stainless Steel. Engineered to protect against outdoor elements including salt water environments two (2) 44� pieces per package.

The Flexframe allows you to fill the gap between the inside opening and the burner pans or disc The flexframe can be bent or cut to fit any shape (square, linear or round) fire pit.

Allows you to remove the burner system without removing any pavers

Example of the Flexframe in a round fire pit

Example of the Flexframe in a square/linear fire pit

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

41

t fits the opening of the This installation instruction covers two (2) separate kits: 1) PAVER-KIT-MT and 2) PAVER-KIT-MT-MSI. ur installation. installation. pit pan or installation. disc before beginning your installation. ning your

TOOLS NEEDED: (1) Drill/driver, Gas Rated Teflon Tape or Compound, 5/16” Hex head driver, (1) 3/16” Concrete Drill Bit, (2) Adjustable Wrenches, Assorted Open-end Wrenches

eht fo gninepo eht stfi tik kcolb oitap revap eht erus eB .noitallatsni ruoy gninnigeb erofeb csid ro nap tip erfi

PAVER KIT CONTROL PANELS

NSTRUCTIONS Fig. 4 Top view of control panel securing into the paver block.

4pTop into control panel securing into the paver block. .kcopanel lbFig. revsecuring a eh tview otinto n4i Top gofnthe icontrol ruview cpaver es lof epanel ncontrol ap losecuring rtnpanel oFig. c fo 4 w eTop ivthe pview oTpaver 4 of .githe Fblock.

SPECIFICATIONS view of control block.

Fig. securing into paver block.

Round Fire Pit Pan Round Flat Fire Pit Disc o install the paver nstall the paver EP 1: Determine thepaver best location to install the paver revap eht llatsni ot noitacol tseb eht enimreteD :1 PETS cation to install the Place control panel into position, mark the ontrol panel per your installation. .noitallatsni ruoy rep lenap lortnoc tik ation.

two holes, remove the control panel and drill holes with 3/16” concrete drill bit. fire enclosure e pit enclosure EP 2:pitRemove one block from your fire pit enclosure

m your fire pit enclosure pening. nening. the width between the opening. nmeasure the opening. rol panelcan can be lending panel be on the block width control cansame be paver mounting bracket. he control panel can be the All paver kit control panels comepanel with the re E: When Fig. 1fit Paver kit with fireopenings. pit pan.

When Fig. 2. Paver kit with fire pit flat disc. sted to various NOTE: When . NOTE: When re equired quired asuring ittois recommended but ut not to required to 8.00”not Min. required to valve alve ess the control panel to protect the valve ect the valve ponents from weather.

PAVER KIT MOUNTING BRACKET

Pav er B

ck

Blo r e Pav

loc

k

erusolcne tip erfi ruoy morf kcolb eno evomeR :2 PETS .gninepo eht neewteb htdiw eht erusaem neht eb nac lenap lortnoc eht htdiw kcolb eht no gnidnepeD nehW :ETON .sgninepo suoirav tfi ot detsujda ot deriuqer ton tub dednemmocer si ti gnirusaem evlav eht tcetorp ot lenap lortnoc eht ssecer .rehtaew morf stnenopmoc

3.500”

eeocation location and and EP 3: the After you have dna noitacol eht denimreted evah uoy retfA :3 PETS ined location anddetermined the location and Kit control panelto install the Paver Kit control panel Kit control asured width lenap lortnoc tiK revaP eht llatsni ot htdiw eht derusaem e Paverthe Kitpanel control panel hown inin kshown theas inside of the shown in ni nwohs sa lenap lortnoc eht fo edisni eht kram anel shown in control panel as 10.500” Max. Fig 3. Paver Kit Control Panel Dimensions re 4.

Front View Top View Finished Front View .4 erugfi Fig. 4 Securing the control panel into the paver block.

DIMENSIONS: The Paver Kit bracket and extension will fit an opening with a maximum of 10.500” wide x 3.500” tall. ”Without concrete drill drill EP: 4 Drill the two holes a width 3/16” concrete drill llird etercnoc ”61/3 a htiw seloh owt eht llirD 4 :PETS the Bracket Extension plate the with maximum is 8.00” wide. The holes in the Extension Bracket are spaced hconcrete a 3/16” concrete drill Fig. 5Front Front view of control panel Fig. 5control view of control panel ready for valve 90° elbows are installed manual every .500”. el with concrete ver 5ivinstalled, Front control installed, ltrol with concrete e v l a v r o f y d a e r , d e l l a t s n i l e n a p lo rtnoinstalled, cinstalled, fFig. o weSTEP tn2:ready oOnce rFview 5thefor .g iof Fvalve ont view of control panel installed, ready for valve nd secure the paver kit panel with concrete Fig. 5 Front view of control panel ready for e tvalve evalve rcpanel nbracket ocintohinto tthe iwPaver lenaKitp ready lortnocfor tikvalve revap eht eruces dna tib panel with concrete key valve then install the MT key bracket. bracket. bracket. . t e k c a r b control panel as shown in Fig. 7. ws.

Figure 5 shows front view. bracket. . w e i v t n o r f swohs 5 erugiF .swercs ew.

PAVERINSTRUCTIONS KIT MT PAVER KIT-MT INSTRUCTIONS AVER PAVER KIT-MT INSTRUCTIONS SNOIPage TCU IONS KIT-MT PAVER KIT-MT REV. 12-31-14 1 ofR7TSNI TM-TIK REVAP MT PAVER KITS INSTRUCTIONS re Models include: PAVER-KIT-MT & PAVER-KIT-MT-MSI

Pav er B

k

loc

loc

er B Pav

k

ontrolpanel) panel)kit face plate bracket (control ntrol STEP 2: Once the 90° elbows are installed into the manual h panel) )lenap loTop rtnoc( tekcarb etalp ecaf tik revap eht htiW acket (control panel) e the paver keyKey valve then install the MT key valve intothe Paver STEPbracket 3: Secure key Kit valve bracket into place usingView the Manual Key Manual he manual gas Manual Key manual gas evValve lgas aValve V eKey K lainValve uFig. naM Manual Key alled nowValve ready to install the manual sValve agFig.la8.unam eht llatsni ot ydaer won era uoy dellatsni controlManual panel as y shown 7. four black thread cutting screws. See nstallyou the are manual gas e. .evlav Pa ver B

ock

r Bl

lo

ck ve MIP 90° brassthe two ½” flare x ½” MIP 90° brass MIP brass EP 1: Prepare ssarb °09 PIM ”½ x erafl P”a½ owt eht eraperP :1 PETS are x90° ½” MIP 90° brass Fig. 7 Installing valve into control panel. compound epeoror compound STEP 4: Install the flex connector ows by installing gas rated Teflon tape or compound dnufrom opthe moburner c rotoeeither pat nofleT detarMTsa g gnillatsni yb swoble Teflon tape or compound STEP 3: Secure the key valve bracket into place using and the connect gas supply to the other ½” Flare x ½” ½” Flare x ½” side of the gas valve ½” Flare x ½” ½” Flare x ½” MIP x8.eraxlF½””½ ½””½ Flare MIP yek launam eht otn½” to the manualkey key the manual x ½” xthe ½” PIM MIP ”key ½ x90° erthem a½” lF ½” ”Flare ½into he male and install four blackMIP thread key cutting screws. See i meFlare ht llaxts½” ni MIP dna sdaerht elam eht ot Flare x manual ½” side Fig. of the gas½” valve.

Conduct a trial burn test by temporarily Flare x ½” MIP them intothreads the manual Brass MIP 90° Brass MIP connecting 90° s90° saBrass rBBrass °the 09fire PElbow IMpan and burner and check for any gas90° Brass Elbow 90° Brass Elbow rass 90° Brass Brass ure thefittings fittingswith areyour e are woblare Efire sElbow sapit. rBMIP °0 990° e the that came Ensure theElbow fittings are 90°pitBrass erElbow a sgnittfi eht erusnE .tip erfi ruoy htiw emac taht evlav it.

Ensure the fittings Elbow leaks before completing the installation. See fire pit manual Elbow w o b l E Elbow nel ure 6 for proper 6 for proper te to prevent any gas leaks.

See figure 6 for proper for proper connections. reporp rof 6 erugfi eeS .skael sag yna tneverp ot thgit See figure 6 for proper Piezo Ignitor Piezo Ignitor Piezo Ignitor ntation. rotIgnitor ingI ozeiP .noitatneiro Piezo Piezo Ignitor See page 6 for lighting instructions.

Fig. 7 Installing MT valve into control panel.

Key Key Mounting Mounting Valve from the burner eKey vlHole aMounting VHole yeK to either Mounting Hole elValve oHValve gnKey itnHole uoValve MSTEP 4: Install the flex connector Valve Mounting Hole side of the gas valve and connect gasFlange supply to the other Flange Flange e g n a l F particular inlet or nge articular inlet or Flange TE: Theparticular manual key or Conduct a STEP side of theinlet gas valve. trial burn temporarily ro telfinish ni rathelupatio citra p on sah evlav yek launam ehT :ETON 5: test Afterbyburn test is complete, paver has no inletvalve or has no particular

connecting the fire pit pan and burner and check for any gas blocks installation. as can be Fig. therefore can be et designation inletinstalled, gas can eb nac sag telni eht erofereht noitangised teltuo 5 Controlthe panel ready for valve bracket. gas can be leaksbe before completing the installation.

See fire pit manual einlet for proper connections. nected to any of the flared ends. .sdne derafl eht fo yna ot detcennoc ends.

Fig. Manualkey elbow Fig. 6 6Manual Fig. elbow nkey oitvalve avalve tSee nTop ekey ipage relbow oView w oblorientation. eorientation. eelbow vinstructions. la v yorientation. e6STEP kManual lau2:nOnce aMkey 6 fittings .gvalve iF are installed nual key valve elbow orientation. the intoorientation. the TMS valve Fig. 6 .Manual 6valve for lighting Angle View then install the valve and bracket into Paver Kit control panel e compound ororcompound onon UTION: not use any no dnuopmoc ro epat Fig. nofl8 eClose T ynupaview essecuring u ton MT oDvalve :Nbracket OITUtoA C control as shown in figure 7. flon tape Do or compound onTeflon tape or compound on panel.

STEP 5: After burn test is complete, finish the patio paver flared ends of the fittings. . s g n i t t fi e h t f o s d n e d e r a fl e h t Pa STEP 3: Secure the TMS valve bracket into place using the

PAVER KIT TMS

TMS INSTRUCTIONS

stalled

blocks installation.

Models include: PAVER-KIT-TMS & PAVER-KIT-TMS-MSI

STEP 4: Install flexgas connector the beginning burner to outlet CAUTION: Turnthe OFF supplyfrom before STEP 2: Once the fittings are installed into the TMS valve

Cover Plate

er B Pav

of the gas valve.

Conduct installation. a trial burn test and check for any media before beginning

(U1-8C-S) Fig.installation.

8 Close up view securing MT valve bracket to control gas leaks before completing the panel.

StepFlare 1: Prepare the fire pit pan or disc by first removing the 1/2" OD x P STEP 3: Secure the TMS valve bracket into place using the v2of See page 7 from for Page lighting two screws the 1” instructions. x 2” cover the 12-31-14 Page of 7 plate exposing erINSTALLATION k2M REV. 12-31-14 2ametal REV. 12-31-14 of 7 7 fMT o 2 ePAVER gaPREV. 41-KITS 1312-31-14 -21 .V Eblack RPage four thread cutting See Fig.REV. 8. PAVER KIT-MT-MSI S9.TIK REPage VrABP B7 loc T 2 ofscrews.

7REV. 12-31-14 7 in Fig. loc leg2asof 3/8" MIP rectangular hole then align thePage burner shown e k

Piezo Ignitor Mounting Hole

STEP 5: After test is complete, finish The inside edgeburn of the burner leg should bethe patio paver Pav STEP 4: Install the flex connector from the burner to outlet CAUTION: Turn OFF gas supply before beginning block installation. approximately 3/4-inch away from the inside edge of Fig. 7 Installing TMS valve into control panel.

Cover Plate side installation. of the gas valve andfire connect supply to the inlet side all If the pit is gas already installed, remove rectangular hole. of the gas valve. a trial burn test and check for any media beforeConduct beginning installation. gas leaks before completing the installation.

Step 2: Remove the two stainless steel screws and nuts NPT Black Step 1: Prepare the fire pit pan3/8” orfrom disc by probe first removing the Fig. 9 Removing cover plate from pan. the assembly but leave it assembled. Carefully See two page 7 for lighting instructions. screws from the 1” x 2” metal cover plate exposing the the top of the pan through slide the orange wire from Iron 90° Elbow rectangular hole then align the burner leg as shown in Fig. 9. rectangular hole in the fire pit pan resting over the burner STEP 5: inside After edge burn test is complete, the patio paver The of the burner legfinish should and be install the screws into the existing holes of the cover blockapproximately installation. 3/4-inch away fromleg the inside edge of Fig. 7 Installing TMS valve into control panel.

See Fig. 10.

3/8” NPT plate. rectangular hole.

Close Nipple

supply o be on the

Step 2: Remove the two stainless steel screws and nuts Fig. 9 Removing cover plate from pan. from the probe assembly but leave it assembled. Carefully slide the orange wire from the top of the pan through rectangular hole in the fire pit pan resting over the burner MTcover PAVER KITS leg and install the screws into the existing holes of the plate. See Fig. 10.

Fig. 6 TMS valve fittingTop orientation.

View

PAVER KIT-MT-MSI INSTALLATION REV. 12-31-14 Page 3 of 7

This product can expose you to Chromium, which is known to the state of California to cause cancer and Fig. 8 Close up view securing TMS valve bracket to control birth defects or other reproductive harm.

(For more panel. information, go to www.p65warnings.ca.gov) PAVER KIT-MT-MSI CAUTION: If the fireINSTALLATION pit is installed then turn OFF main

REV. 12-31-14 Page 2 of 9 42

REV. 12-31-14 Page 3 of 7

Angle View

Fig. 8 Close up view securing TMS valve bracket to control panel.

MT PAVER KITS

gas supply and remove all media prior to installation of

k

loc

ock

side of the gasIf valve andpit connect gas supply to the inlet side installation. the fire is already installed, remove all Gas Inlet Top View then install the valve and bracket into Paver Kit control panel as shown in figure 7.

lare x KITS r he TMS are tight a 1/2” ng to

ver KIT-MT-MSI INSTALLATION four black thread cutting screws. See Fig. PAVER 8.

Bl

3/8” NPT

Close Nipple Step 8: Attach the 1/4” end of extension wire (PIEZO23WH) Fig. 14 Installing ignition hood. to the orange ignitor wire and attach the 1/4” wire end (PIEZO48WH) wire to ground tab under the burner pan.

Step 11: Attach the 1/4” end of extension wire (PIEZO23WH) See Fig. 16. to the orange ignitor wire and attach the 1/4” wire end Fig. 18 Installing PAVER-KIT-TMS-MSI Piezo module into mounting plate.

(PIEZO48WH) wirePAVER-KIT-MT-MSI to ground tab under the burner pan. See figure drawingsStep 14, 9: 19 and 20 for reference.

Test the ignitor by pushing and holding the red DESCRIPTION: DESCRIPTION: These vents These are vents designed are designed to be used towith beisused most with paver most block paver fire pit enclosures fire pit enclosures and can be and installed can be as installed as Outlet button to ensure the 2-probe ignitor sparking inside theblock a universal a universal vent for other vent applications for other applications such as grill such islands, as grillfire islands, table or firebars. tableThe or bars. ventsThe provided vents with provided this kit with provide this kita provide a ignition box in the burner pan. The spark should be located minimum minimum of 18-square of 18-square inches perinches vent. per vent. directly over top of the burner port hole for proper ignitionInlet the gas as previously Spacing between Many fire Many pits require fireof pits a require minimum a minimum of 18 square of discussed.

18 inches square of inches cross ventilation of cross ventilation (seethe Fig.1). (seeThis Fig.1). crossThis ventilation cross ventilation provides sevprovides sevprobes should be air approximately 1/8”and for protect proper spark. eral things: eral 1. things: It allows 1.fresh It allows air to fresh keep the to enclosure keep the enclosure dry dry and any protect electronic any electronic components components to ensureto they ensure operate they operate Step 12: Reconnect the thermocouple lead to the gas valve.

SeeasFig. on page 4 ifoutlet necessary. and function andas function designed. designed.

2:12 It provides 2: It an provides for an outlet possible for gas possible leaksgas andleaks can prevent and canany prevent potential any delayed potentialignitions. delayed ignitions. plus athe quarter turn with a due wrench.

3. ItInstall assist3.itinItfinger keeping assisttight inthe keeping enclosure enclosure cooler due cooler to radiant to heat radiant that heat can occur that can during occur operation. during operation.

MSI KITS FOR PAVER CONTROL PANELS

Thermocouple Lead In some cases In some thecases extension the bracket may bracket be not may needed be not because needed the because vent ensure can the be vent recessed can be recessed inside theinside blocksthe to blocks help to help Step 10: extension Install the ignition hood screen mesh and camouflage camouflage them. Two ventsTwo per fire per are fire required pit are on required each onSee each of Fig. enclosure side to ensureto cross ensure ventilation. cross ventilation. no them. media laysvents onpit the screen mesh area.side 17.of enclosure Install

the lava rock/media material according to fire pit install manual and turn MT the main gas supply back ON. KEY VALVE Installation is now complete.

PIEZO23WH Fig. 15 Wiring into the Piezo module.

PIEZO48WH

Top View

Top View

Fire Pit Fig. Pan 19 Attaching Piezo ignition wires.

Probe Assembly

TMS PAVER KITS PIEZO48WH

Lava Rock

Orange Wire This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov) Ignition Hood

ON

ON

Manual Key Valve OFF

AT ON POSITION TO SLIGHT PUSH TURN OFF FULL PUSH TO LIGHT

OFF

AT ON POSITION TO SLIGHT PUSH TURN OFF FULL PUSH TO LIGHT

FF O

N O

Cross Flow Cross Ventilation Flow Ventilation Ignition Hood

PIEZO23WH

Screen

Piezo Module Fig. 1 Cross Fig.ventilation 1 Cross ventilation example example Gas Supply

Lava Rock

PAVER VENT KITS Fig. 16 Wiring diagram

Fig. 17 Installing screen mesh cover on ignitor hood.

PAVER-VENT-4 8”

3.5”

PAVER-VENT-6 8”

8”

MT PAVER KITS

3.5”

3.12”

8”

REV. 12-31-14 Page 5 of 7

3.12”

5.5”

7”

Lava Rock

REV. 12-31-14 Page 6 of 9

5.5”

5.12”

5.12”

PRECAUTION: The vent bracket is designed to be mounted to a paver block by drilling two holes and securing it into place with two concrete screws(provided). If you desire to place the vent in the first row of patio blocks you may need to install a block below grade level to secure the vent bracket into place.

7”

Front View Fig. 2 PAVER-VENT Fig. 2 PAVER-VENT -4 -4

At the same time, depending on how your are laying your paver blocks you may need to incorporate a lintel (not included) to lay across the top of the paver vent to support your next row of blocks. The reason for this is that the vent may support 7” easily fall7”without some type of additional support. We suggest using a the front edge of a block but the back edge could rigid 3" xFig. 12" metal plate (part PAVER-VENT-LINTEL) one if needed.

Front View 3 PAVER-VENTFig. 3 #PAVER-VENT6 6 to order

Place the vent bracket into position, mark the two holes, remove vent bracket and drill two holes with a 3/16” concrete drill bit.

Pav er B Paver Paver4-6 Vents Angle ViewVents

4-6

loc

k

ck Blo r e REV. 9-10-15 REV. Page 9-10-15 Pav 2 Page 2 Top View of Vent Installed

Fig. 4 Top view of vent installed STEP 1: Determine the best location to install the paver vent in your enclosure.

This product can expose you to Chromium, which is known to the state of California to STEP cause cancerone and 2: Remove block from your fire pit enclosure then measure the width between the opening. on themore block width the vent bracket can be adjusted to fit various openings. NOTE: When installing it is birth defects or other reproductiveDepending harm. (For recommended (but not required) to recess the vent bracket an inch or two to help camouflage the vent and keep it in a information, go to www.p65warnings.ca.gov) lower area of the enclosure. Vent can also be painted to match block if desired.

The bracket extension can be used to extend the vent bracket from 8-inches wide up to 10-inches wide if

43

MEDIA INSTALL GUIDE LAVA ROCK ONLY When using only lava rock, you only need to use as much lava rock in order to cover the burner. Do not over-fill. Just use enough to hide the burner from view.

LAVA ROCK

LAVA ROCK & GLASS In order to use glass, we recommend that you lay down a bottom layer of lava rock. Fill the pan with lava rock until it is level with the top of the burner. Then take your glass and lay it on top of the lava rock and burner. The glass should only be 3/4” to 1”thick, or just enough to cover the burner.

GLASS LAVA ROCK

LAVA ROCK & LAVA STONE In order to use lava stones, we recommend that you lay down a bottom layer of lava rock. Fill the pan with lava rock until it is level with the top of the burner. Then take your lava stones and lay it on top of the lava rock and burner. The lava stones should only be one layer thick, just enough to cover the burner.

LAVA STONE LAVA ROCK

LAVA ROCK & LAVA BOULDER In order to use lava boulders, we recommend that you lay down a bottom layer of lava rock. Fill the pan with lava rock until it is level with the top of the burner. Then take your lava boulders and lay it on top of the lava rock and burner. Lava boulders are 6” to 12” in diameter, there is enough room between them that gas can flow properly. You can use as many as you like.

LAVA BOULDER LAVA ROCK

LAVA ROCK & LOG SET In order to use a log set, we recommend that you lay down a bottom layer of lava rock. Fill the pan with lava rock until it is level with the top of the burner. Then take your log set and lay it on top of the lava rock and burner.

44

LOG SET LAVA ROCK

HOW MUCH MEDIA TO USE ROUND FIRE PITS INSIDE DIAMETER

LAVA ROCK ONLY

LAVA ROCK AS A BASE

GLASS ON TOP OF LAVA ROCK

LAVA STONE ON TOP OF LAVA ROCK

LAVA BOULDERS ON TOP OF LAVA ROCK

16”

10 lbs

5 lbs

10 lbs

10 lbs

1/4 box

19”

15 lbs

10 lbs

20 lbs

15 lbs

1/2 box

25”

20 lbs

15 lbs

30 lbs

20 lbs

3/4 box

29”

25 lbs

20 lbs

40 lbs

25 lbs

1 box

33”

30 lbs

25 lbs

50 lbs

30 lbs

1 box

34”

30 lbs

25 lbs

60 lbs

30 lbs

1 box

44”

50 lbs

35 lbs

70 lbs

50 lbs

2 - 3 boxes

SQUARE FIRE PITS INSIDE DIAMETER

LAVA ROCK ONLY

LAVA ROCK AS A BASE

GLASS ON TOP OF LAVA ROCK

LAVA STONE ON TOP OF LAVA ROCK

LAVA BOULDERS ON TOP OF LAVA ROCK

20”

15 lbs

10 lbs

20 lbs

15 lbs

1/2 box

26”

20 lbs

15 lbs

30 lbs

20 lbs

3/4 box

32”

30 lbs

25 lbs

50 lbs

30 lbs

1 box

38”

35 lbs

30 lbs

60 lbs

35 lbs

1 1/4 box

LINEAR FIRE PITS INSIDE DIAMETER

LAVA ROCK ONLY

GLASS ONLY

LAVA STONE ONLY

24”

10 lbs

10 lbs

6 lbs

30”

10 lbs

13 lbs

10 lbs

36”

15 lbs

15 lbs

12 lbs

48”

16 lbs

20 lbs

16 lbs

54”

18 lbs

23 lbs

18 lbs

60”

20 lbs

26 lbs

20 lbs

66”

22 lbs

28 lbs

22 lbs

72”

24 lbs

30 lbs

24 lbs

45

CONTROLS AF4000ADP24(80) 110 volts AC adapter, coverts to 7.5 DC volts for TFS systems. Requires a weather resistant enclosure.

1.1”

2.6”

1.9”

24”

Front View

Side View

WIRING DIAGRAM

The AF4000ADP24(80) plugs into the POWER plugs on the module, which is inside the metal box underneath the Fire Pit Burner System.

Once the adaptor is plugged into the module, you must plug it in to a GFCI outlet that is installed in a double-outlet NEMA 3R Enclosure (not provided).

Please note that this adapter is only 24” long. Do not try to run this adaptor outside of the enclosure. An electrical line will need to be ran into the enclosure and secured using a double-outlet NEMA 3R Enclosure (not provided). Please review your local codes.

Please note that the battery pack still needs to be attached to the system for normal operation.

Ignitor Assembly

I

Battery Pack

(Ignitor) Tan (Sensor)

VCS-5000MODTC Module

Black (Ground)

OUT PILOT ADJ

Learn AUX

Red

Low Rate Set Screw

PILOT

POWER MAIN

White

S

Latching Solenoid-DC Motor Drive

Remote/OFF

Black Red

Black (4-Pin Connector)

Black

Orange

Copper (Thermocouple Ground Wire)

IN

Green White

Orange 2-Brown

Black (-) Red (+)

This is representative of the wires leaving the box in order to be plugged into the recepticle, which is outside the box but still inside the enclosure.

46

AF4000HAT This is Firegear’s Home/Pool Automation Transmitter. It allows you to operate your Firegear TFS product from the same controller you‘re used to using your pool system. It’s important to note that even though you are using the HAT, you can still use your original remote that came with your TFS unit.

WIRING DIAGRAM Maximum 100-feet of 18-gauge (or larger) wire that is suitable for outdoors

TFS FIRE PIT SYSTEM

HAT TRANSMITTER

HOME AUTOMATION SYSTEM

SPA

POOL

SPA WATERFALL

CLEANER

MUSIC

FOUNTAIN

GAS APPLIANCE MENU

This is a wireless signal. The transmitter must be within 20’ of the control module, which is located underneath the fire pit. If the AF-4000HAT is installed outside, it much be installed in a NEMA 3R Enclosure (not provided) or weather resistant enclosure.

HEAT

JETS LIGHTS

DISPLAY

The AF4000HAT comes with a wall plate making it easy to mount on any wall.

47

FIREGEAR OUTDOORS 9230 CONSERVATION WAY FORT WAYNE, IN 46809 TOLL FREE: 1-888-672-8929 This product can expose you to Chromium, which is (888) 672-8024 known to the state ofFAX: California to cause cancer and www.firegearoutdoors.com birth defects or other reproductive harm. (For more

LIDS

information, go to www.p65warnings.ca.gov) SELECT DESIRED MODEL: LID-16R LID-19R LID-25R

ROUND

LID-29R LID-33R

A

MODEL

OUTSIDE DIM. A

LID HEIGHT B

LID HEIGHT WITH HANDLE

LID-16R

19”

5/8”

2"

LID-19R

22 3/8”

5/8”

2”

LID-25R

28 3/8”

5/8”

2”

LID-29R

32 1/2”

5/8”

2”

LID-33R

36 1/2”

5/8”

2”

FIREGEAR OUTDOOR 9230 CONSERVATION W FORT WAYNE, IN 468 TOLL FREE: 1-888-672-8 B FAX: (888) 672-8024 www.firegearoutdoors.c

SIDE VIEW

SELECT DESIRED MODEL: LID-20S LID-26S LID-32S

FIREGEAR OUTDOORS 9230 CONSERVATION WAY FORT WAYNE, IN 46809 B TOLL FREE: 1-888-672-8929 FAX: (888) 672-8024 www.firegearoutdoors.com

LID-38S TOP VIEW

SIDE VIEW

SELECT DESIRED MODEL: LID-20S LID-26S

SQUARE

LID-32S LID-38S

OUTSIDE DIM. A

LID HEIGHT B

LID HEIGHT WITH HANDLE

LID-20S

22 1/4”

1 1/4”

2"

LID-26S

28 1/4”

1 1/4”

LID-38S

34 1/4” 40 1/4”

B

2” BURNER

1 1/4”

LIDS

ROUND LIDS

1 1/4”

2”

MODEL LID-20S LID-26S LID-32S TOP VIEW SELECT LID-38S SELECT DESIRED DESIRED MODEL: MODEL:

LINEAR MODEL

LENGTH A

LID HEIGHT B

LID-24L

29 3/4”

2 5/8”

LID-30L

35 3/4”

2 5/8”

LID-36L

41 3/4”

2 5/8”

LID-60L

53 3/4”

2 5/8”

LID-68L

69 3/4”

2 5/8”

LID-84L

77 3/4”

LID-LOF30

32 3/8”

LID-LOF36

38 3/8”

LID-20S LID WIDTH LID-26S C LID-32S LID-38S

OUTSIDE DIM. A 22 1/4" 28 1/4" 34 1/4" 40 1/4"

OUTSIDE DIM. A 22 1/4" 28 1/4" 34 1/4" 40 1/4"

FIREGEAR FIREGEAR OUTDOORS OUTDOORS 9230 9230 CONSERVATION CONSERVATION WAY WAY FORT WAYNE, FORT WAYNE, IN IN 46809 46809 LID WIDTH LID HEIGHT TOLL FREE: LID HEIGHT WITH 1-888-672-8929 TOLL FREE: 1-888-672-8929 REVISION DATE 05/26/2016 B C 672-8024 HANDLE FAX: FAX:22(888) (888) CADdetails.com 1 1/4" 1/4" 672-8024 2 5/8" www.firegearoutdoors.com www.firegearoutdoors.com 1 1/4" 28 1/4" 2 5/8" 1 1/4" 1 1/4"

34 1/4" 40 1/4"

2 5/8" 2 5/8"

LID-30L LID-30L LID-36L LID-36L NOTES: B BE ATTACHED FOR USE. 1. LIDS COME WITH A HANDLE THAT MUST 2. ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. 3. ALWAYS SIDE VIEW ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING A FIRE PIT. 4. DRAWINGS NOT TO SCALE. 5. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. 6. ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY TH LIDTO WIDTH LID HEIGHT LIDACCURATE. HEIGHT WITH MANUFACTURER BE CONSIDERED A A B 7. CONTRACTOR'S NOTE: C FOR PRODUCT AND HANDLE COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER 5053-099.

1 1/4" REFERENCE NUMBER 22 1/4" 2 5/8"

1 1/4" FITS THESE MODELS 1 1/4"

8 1/4”

B

SIDE VIEW

PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD.

48

C

2”

5053-098

MODEL

LID HEIGHT WITH HANDLE 2" 2" 2" 2" 2"

LID HEIGHT B 5/8" 5/8" 5/8" 5/8" 5/8" A

NOTES: 1. LIDS COME WITH A HANDLE THAT MUST BE ATTACHED FOR USE. 2. ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. 3. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING A FIRE PIT. 4. DRAWINGS NOT TO SCALE. TOP VIEW 5. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. 6. ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT MANUFACTURER TO BE CONSIDERED ACCURATE. 7. CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER C REFERENCE NUMBER 5053-098.

SIDE VIEW

MODEL

LID-32S

OUTSIDE DIM. A 19" 22 3/8" 28 3/8" 32 1/2" 36 1/2"

MODEL LID-16R LID-19R LID-25R LID-29R LID-33R

A

1 1/4"

28 1/4"

2 5/8"

34 1/4" 2 5/8" BURNER LIDS 40 1/4" 2 5/8"

C C

SQUARE LIDS

FPB-L24

NOTES: 5053-099 1. LIDS COME WITH A HANDLE THAT MUST BE ATTACHED FOR USE. PROTECTED

BY COPYRIGHT CADDETAILS.COM LTD. TOP 2. ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF©2016 ENCLOSURE. TOP VIEW VIEW 3. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING A FIRE PIT. 4. DRAWINGS NOT TO SCALE. 5. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. 6. ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT MANUFACTURER TO BE CONSIDERED ACCURATE. SIDE VIEW 7. CONTRACTOR'S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER REFERENCE NUMBER 5053-099.

SIDE SIDE VIEW VIEW

8 1/4”

FPB-L30

8 1/4”

FPB-L36

8 1/4”

(2)FPB-L24 End to End

8 1/4”

(2)FPB-L30 End to End

2 5/8”

8 1/4”

(2)FPB-L36 End to End

5053-099 2 5/8”

8 1/4”

LOF30 Series

2 5/8”

8 1/4”

LOF 36 Series

B B B

BURNER LIDS SQUARE LIDS

PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD.

MODEL MODEL LID-30L LID-30L LID-36L LID-36L

OUTSIDE OUTSIDE DIM. DIM. A A 32 3/8" 3/8" 32 38 38 3/8" 3/8"

LID LID HEIGHT HEIGHT B B 11 1/4" 1/4" 11 1/4" 1/4"

LID LID LID WIDTH WIDTH LID HEIGHT HEIGHT WITH WITH REVISION DATE 05/26/2016 C HANDLE C HANDLE 88 1/4" 1/4"CADdetails.com22 5/8" 5/8" 22 5/8" 88 1/4" 1/4" 5/8"

NOTES: NOTES: 1.

1. LIDS LIDS COME COME WITH WITH A A HANDLE HANDLE THAT THAT MUST MUST BE BE ATTACHED ATTACHED FOR FOR USE. USE. 2.

2. LINEAR LINEAR LIDS LIDS LISTED LISTED ABOVE ABOVE WILL WILL ONLY ONLY FIT FIT LOF30 LOF30 AND AND LOF36 LOF36 MODELS MODELS AT AT THE THE CURRENT CURRENT TIME. TIME. 3. ALL ALL FIRE FIRE PITS PITS REQUIRE REQUIRE 18-SQUARE 18-SQUARE INCHES INCHES OF OF CROSS CROSS FLOW FLOW VENTILATION VENTILATION PER PER SIDE SIDE OF OF ENCLOSURE. ENCLOSURE. 3.

4. ALWAYS ALWAYS ADHERE ADHERE TO TO YOUR YOUR STATE STATE AND AND LOCAL LOCAL CODES CODES WHEN WHEN INSTALLING INSTALLING A A FIRE FIRE PIT. PIT. 4.

5.

DRAWINGS NOT TO SCALE. 5. DRAWINGS NOT TO SCALE. 6.

THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS 6. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND AND DESIGN DESIGN PROFESSIONALS PROFESSIONALS FOR FOR PLANNING PLANNING PURPOSES PURPOSES ONLY. THIS THIS DRAWING DRAWING MAY MAY NOT NOT BE BE USED USED FOR FOR CONSTRUCTION. CONSTRUCTION. ONLY. 7. ALL ALL INFORMATION INFORMATION CONTAINED CONTAINED HEREIN HEREIN WAS WAS CURRENT CURRENT AT AT THE THE TIME TIME OF OF DEVELOPMENT DEVELOPMENT BUT BUT MUST MUST BE BE REVIEWED REVIEWED AND AND APPROVED APPROVED BY

BY THE THE PRODUCT PRODUCT 7.

MANUFACTURER TO TO BE BE CONSIDERED CONSIDERED ACCURATE. ACCURATE. MANUFACTURER 8.

8. CONTRACTOR'S CONTRACTOR'S NOTE: NOTE: FOR FOR PRODUCT PRODUCT AND AND COMPANY COMPANY INFORMATION INFORMATION VISIT VISIT www.CADdetails.com/info www.CADdetails.com/info AND AND ENTER ENTER REFERENCE NUMBER 5053-097.

WINDSHIELDS

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

ROUND MODEL GWS-22R

DIAMETER

FITS THESE PAN SIZES

22”

FPB16 - FPB19 (round)

SQUARE / RECTANGULAR MODEL

LENGTH

WIDTH

HEIGHT

FITS THESE PAN SIZES

GWS-3030

30”

30”

7 1/2”

FPB-20S (Square)

GWS-3838

38”

38”

7 1/2”

FPB-26S, FPB-32S (Square)

GWS-4242

42”

42”

7 1/2”

FPB-38S (Square)

GWS-3812 / GWS-3810

38”/38”

12”/10”

7 1/2”

FPB-24L,LOF-30

GWS-4312 / GWS-4410

43”/44”

12”/10”

7 1/2”

FPB-30L, FPB-36L, LOF-36

60”

10”

7 1/2”

FPB-24L + FPB-24L or FPB-30L + FPB-24L

85”/84”

12”/10”

7 1/2”

FPB-36L + FPB-36L or FPB-36L + FPB-30L

GWS-6010 GWS-8512 / GWS-8410

49

VENT KIT

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

VENT-KIT-6X12

Install the vents on opposite sides of the enclosure to ensure cross flow ventilation. Cross flow ventilation is necessary to provide free flowing air to assist in keeping the enclosure dry and cool during operation of a fire pit.

Cut an rectangular x 3.75” intovent on opposite of theother enclosure.

Center of the vent These vents are designed to be used with Assemble-n-Finish (AnF) enclosures as wellopening as a 9.75” universal for sides many types fireover pitthe cut out area ensuring the vent slots are clear of any obstruction. Mark the holes with a pencil or marker. Drill six ¼” clearance holes, enclosures. place the vent centered over the opening, insert a screw into the vent and enclosure at the same time and secure with washer and nut onvent the inside.

CRIPTION: These vents are designed to be used with Ready to Fit (RTF) enclosures as well as universal for Repeat the process until all six screws are securing each vent into place on both sides of the enclosure. other types of fire pit enclosures. Figure 1 shows the actual dimensions of each vent.

11.380”

3.500” TYP.

5.750”

9.750” 3.750”

.500” TYP.

Cut Out Detail

Fig. 1 Vent dimensions.

Fig. 2 Cutting hole in enclosure and installing vent.

CROSS VENTILATION

1 2

(855) 498-8324 Fire pits are subjected to many outdoor elements such as rain, snow, wind, heat orFOR cold.

A minimum of 18 square inches of cross ventilation TECHNICAL SERVICE, CALL: (2 sides) is required to keep the components in good working order. Use the figure below as a guide to assist you to incorperate proper Firegear Outdoors ventilation.

9230 Conservation Way Fort Wayne, IN 46809 For Sales: (888) 672-8929

When using LP gas, ventilation should be located near the base of the structure.

WEB SITE: www.firegearoutdoors.com

2-8-16 Page 2

Vent Kit - 6x12

3

4

able 1: Part Identification

AIR

Replacement Parts Item # 1 2 3 4

Part Number VENT- 6x12 SCREW1024PANBL ST3-113-1020 W WASHER10SS O IR

FL

Description 6” x 12” Vent 1.25” Phillips black pan head screw 10x24 Stainless steel nut #10 Stainless steel flat washer

Qty. 2 12 12 12

A

The vents should be placed in the middle of the enclosure, and on opposite sides

Vent Kit - 6x12

50

2-8-16 Page 1

OW

FL

NATURAL GAS : PIPE SIZING CHART Length of Pipe in Feet

1/2”

3/4”

1”

1 - 1/4”

1 - 1/2”

2”

2 - 2 1/2”

3”

4”

10

108

230

387

793

1237

2259

3640

6434

-

20

75

160

280

569

877

1610

2613

5236

9521

30

61

129

224

471

719

1335

2165

4107

7859

40

52

110

196

401

635

1143

1867

3258

6795

50

46

98

177

364

560

1041

1680

2936

6142

60

42

89

159

336

513

957

1559

2684

5647

70

38

82

149

317

476

896

1447

2492

5250

80

36

76

140

239

443

840

1353

2315

4900

90

33

71

133

275

420

793

1288

2203

4667

100

32

68

126

266

411

775

1246

2128

4518

125

28

60

117

243

369

700

1143

1904

4065

150

25

54

105

215

327

625

1008

1689

3645

175

23

50

93

196

303

583

993

1554

3370

200

22

47

84

182

280

541

877

1437

3160

300

17

37

70

145

224

439

686

1139

2539

Length of Pipe in Feet

1/2”

3/4”

1”

1 - 1/4”

1 - 1/2”

2”

2 - 2 1/2”

3”

4”

10

275

567

1071

2205

3307

6221

10140

17990

35710

• Natural Gas (NG) flow is given in thousands of BTU/hr. One cubic foot of LP gas - 1000 BTU • Nominal pressure at the burner for Natural Gas is 3.5” of water column. (Typical machine supply 5”-7”) • Pipe length must include additional length for all fittings.

Add approximately 5 feet of pipe per fitting.

• Natural Gas Example: A machine with a burner that requires 440,000 BTU would need a 1 -1/4” pipe for a 20” long run.

LIQUID PROPANE : PIPE SIZING CHART

20

189

393

732

1496

2299

4331

7046

12510

25520

30

152

315

590

1212

1858

3465

5695

10110

20620

40

129

267

504

1039

1559

2992

4778

8481

17300

50

114

237

448

913

1417

2646

4343

7708

15730

60

103

217

409

834

1275

2394

3908

6936

14150

70

89

185

346

724

1086

2047

3329

5908

12050

80

78

162

307

630

976

1811

2991

5309

10830

90

69

146

275

567

866

1606

2654

4711

9613

100

63

132

252

511

787

1496

2412

4281

8736

125

54

112

209

439

665

1282

2083

3618

7382

150

48

100

185

390

590

1138

1808

3210

6549

175

43

90

168

353

534

1030

1637

2905

5927

200

40

83

155

325

491

947

1505

2671

5450

300

37

77

144

303

458

887

1404

2492

5084

• Liquid Propane (LP) Gas flow is given in thousands of BTU/hr. One cubic foot of LP gas - 2516 BTU. • This chart refers to low pressure LP, after regulation, Standard nominal pressure at the burner for Liquid Propane Gas is 11” of water column.

• Pipe length must include additional length for all fittings.

Add approximately 5 feet of pipe per fitting.

• LP Example: A machine with a burner that requires 440,000 BTU would need a 1” pip for a 20’ long run.

NOTE: The sizing charts above list the specific pipe sizes required for the amount of BTU’s for a new gas line installations. If you are using an existing gas line you must take into consideration the existing gas line capacities to ensure you will have proper pressure. This chart is for reference only, we recommend you consult with a Licensed Plumber/Gas Fitter or NFPA54 (National Fuel Gas Code - current edition) for more details.

PROPANE TANK BTU’S 11 lb. Tank

20 lb. Tank

30 lb. Tank

40 lb. Tank

50 lb. Tank

= 2.98 gal. of gas

= 5 gal. of gas

= 7 gal. of gas

= 10 gal. of gas

= 25 gal. of gas

= 256,205 Btu’s

= 430,000 Btu’s

= 640,000 Btu’s

= 860,000 Btu’s

= 2,159,400 Btu’s

To determine how long a gas appliance will operate on one tank of gas first determined the total Btu’s of the propane tank. Divide that number by the total Btu’s of your appliance. This will provide to the approximate total time your gas appliance will operate on the tank of gas.

Example: I have a LP gas fire pit rated at 105,000 Btu’s and I am considering using a 20lb. Propane tank to operate it. If you take 430,000 Btu’s (total Btu’s of a 20lb. tank) divided by 105,000 Btu’s the total operating time will be approximate 4.09 hours.

51

CUSTOM ORDER FORM Quote#

Request Date

CONTACT INFO Distributor:

Contact:

Phone (Office):

Email:

Street Address: City:

State:

Re-Seller:

Contact:

Phone (Office):

Email:

Zip:

Street Address: City:

State:

Zip:

Project Name: Expected Need Date:

PROJECT INFORMATION : Please answer / select all that apply Project Application: Gas Type:

Commercial

NG (Natural Gas)

Residential

Certification Required:

YES

NO

LP (Liquid Propane)

Please check which item best describes your project: Complete custom fire feature (Includes Disc or Pan, Burner and Ignition System) Custom Burner Only (No Pan, No Ignition System)

Custom Pan Only

IGNITION TYPE : How to turn it on - Check one

Hot Surface, Electronic Ignition (Requires 120Vac) - 125,000 BTU

290,000 BTU

500,000 BTU

Battery Operated Electronic Ignition (TFS - Thermocouple Flame Sense)(Max 110,000 BTU) TMS (Thermocouple Manual Safety)

OPTIONAL: Manual Spark Ignition “Piezo” - Battery Operated

Match Light with Manual Spark Ignition “Piezo” - Battery Operated Match Light (Light with Butane Lighter) Ignition Accessories for Electronic Systems - Check all that apply Timer

Emergency Shut Off

Wall Switch

Remote Control

Remote Control for Electronic Ignition Systems only (max distance is 25’ from appliance)

52

ROUND & SQUARE BURNERS : Select or fill in where applicable Style of Pan

Select One Below

Outside Dimension

Inside

Flat Disc

N/A

Pan Style (Round) Pan Style (Square)

Lip Required

YES

NO

Size of Lip if different from 1 3/8” each side

Burner Flame Expectations Height of Flame 65,000 to 85,000 BTU

85,000 to 120,000 BTU

500,000 BTU

250,000 BTU

LINEAR BURNERS : Fill out where applicable Length

Dimensions:

Depth

Linear Burner Flame Pattern : Select One Lip Required

YES

NO

Field of Fire (H Style)

Width Single Row of Fire

Size of Lip if different from 1 3/8” each side

Please help us understand the enclosure that the Custom Burner will be installed in. If you have drawings or pictures, please provide those as attachments. The more details we have the smoother the quote process will be.

ENCLOSURE DETAILS : Select or fill in where applicable Constructed of: CMU (Concrete Masonry Unit)

RTF (Ready to Finish Enclosure)

Paver / Brick

Height & Width of Enclosure: Height

Depth

Width

FINISHING MATERIALS : Select all that apply Manufactured Stone

Real Stone

Paver / Brick

Stucco

Other

VENTILATION : Requires 18 square inches of cross ventilation Do you want Firegear to provide vents?

Size of vents being installed

YES

NO

ADDITIONAL INFORMATION OR REQUESTS

SAVE FORM BEFORE SENDING

EMAIL TO : INFO@FIREGEAROUTDOORS.COM or FAX T0 : 888.672.8024

53

LIVE BURN PROGRAM INSTALL LOCATION ADDRESS

INSTALL DATE

SUBMIT DATE

CITY

STATE

DEALER

ZIP

DISTRIBUTOR

ADDRESS CITY

STATE

CONTACT

PHONE

EMAIL FIREGEAR ITEM #

ZIP FAX

WEBSITE SERIAL # IF APPLICABLE

INVOICE #

COST

DISPLAY ALLOWANCE %

Submit claim form with a photograph of each eligible item and a copy of the original invoice.

Photograph must show product burning. Product must remain on display for 12 months from date of submittal. Company reserves the right to charge back the display credit if the display is no longer available for consumer presentations. In order to qualify for Burn Display Allowance must be a functional gas burning display. Product purchased as part of the Firegear Outdoors Kiosk is excluded from the burn / display program.

CREDIT REQUESTED

TOTAL CREDIT REQUESTED

Burn/Display credits will be issued exclusively toward future purchases of Firegear products.

AUTHORIZED DEALER SIGNATURE / DATE

Mail or Email forms to:

AUTHORIZED DISTRIBUTOR OR SKYTECH / FIREGEAR FACTORY REPRESENTATIVE SIGNATURE / DATE

SKYTECH PG APPROVAL

Skytech Products Group Display Claims Processing 9230 Conservation Way, Fort Wayne IN 46809 Email: order@firegearoutdoors.com

Burn / Display Credit Form 1-1-17

54

CREDIT MEMO #

CATEGORY

CATALOG PAGE #

ELIGIBLE PRODUCTS

ADDITIONAL BURN CREDIT

Outdoor Fireplaces

8-9

Kalea Bay 36/48/60/72

50%

10 -11

OD42

20%

12 - 13

Key West See-Thru

40%

16 - 17

Key West Bistro

20%

18 - 19

Key West Coffee Table

20%

26 - 27

Round Burner Systems - UL Listed

40%

28 - 29

Flat Disc Burner Systems - UL Listed

40%

30 -31

Square Burner Systems - UL Listed

40%

32 - 33

L Series - UL Listed

40%

34

Round/Flat Disc/Square - Non Listed

40%

34

Line of Fire - Non Listed

20%

Fire Furnishings

Burner Systems

Assemble and Finish (AnF)

36 - 37

Round/Linear/Square AnF Enclosures

40%

Paver Kit Control Panels

38 - 39

Control Panels & Vent Kits

40%

Jewelry

46

Lava Rock/Lava Stone/Lava Boulder

50%

48

Glass

50%

Log Sets for Fire Pits

50%

54

Controls

50%

55

Windshields

50%

56

Lids

50%

57

MSI Kits & Vent Kit

50%

68

Hoses & Regulators

50%

63

*Glass Tower

100%

50 - 51 Accessories

Dealer Tools

Create a claim form with a photograph of each eligible item and a copy of the original invoice. Photograph must show product burning and must include model #, serial #, distributor/dealer name, physical address of display. Product must remain on display for 12 months from date of submittal. Company reserves the right to charge back the full amount of the display credit if the display is no longer available for consumer presentations. To qualify, Burn Display Allowance must be a functional gas burning display.

Kalea Bay Burn Display Requirements: To qualify for the Live Burn Display, Kalea Bay must have finishing material used to face the unit. If displaying as a See-Through, you may leave one side unfinished. No more than one live Kalea Bay display per location unless approved by Firegear Outdoors in writing. *Dealer can receive 100% credit with proof of purchase of $200 of Firegear Fireglass.

PHONE: 888.672.8929

FAX: 888.672.8024

EMAIL: ORDER@FIREGEAROUTDOORS.COM

55

LITERATURE ORDER FORM ORDER DATE DEALER

DISTRIBUTOR

ADDRESS CITY

STATE

CONTACT

ZIP

PHONE

EMAIL

FAX

ATTENTION

2017 CATALOG

THE BEST ROOM IN THE HOUSE

ISN’T IN THE HOUSE AT ALL

2017 CATALOG

QUANTITY

FG-LIT-CATALOG-17 Also available online (See instructions below) 1

2017 SPECIFICATION BOOK

THE BEST ROOM IN THE HOUSE

ISN’T IN THE HOUSE AT ALL

2017 SPEC BOOK

AVAILABLE ONLINE ONLY

FG-LIT-SPEC-17

(See instructions below)

1

2017 PRICE BOOK

THE BEST ROOM IN THE HOUSE

ISN’T IN THE HOUSE AT ALL

2017 PRICE BOOK

QUANTITY

FG-LIT-PRICING

AnF

Assemble and Finish

QUANTITY

AnF LITERATURE

only purchased in packs of 25

FG-LIT-ANF

PACKS

BUILDING A FIRE PIT HAS NEVER BEEN THIS EASY

QUANTITY

PRODUCT BROCHURE

Five (5) FPB-36LTFS-N shown

only purchased in packs of 25

FG-LIT-BROCHURE

PACKS

THE BEST ROOM IN THE HOUSE

ISN’T IN THE HOUSE AT ALL

INSTRUCTIONS FOR ACCESSING LITERATURE ONLINE Go to www.firegearoutdoors.com Click on the products tab Scroll down until you see your desired literature piece You can then view, download or share the document!

For special events and large quantities, please allow up to 2 weeks for processing and delivery. Expedited requests requiring express shipping are billable.

FAX or EMAIL forms to: 56

888.672.8024

or

order@firegearoutdoors.com

NOTES

57

RETURN POLICY

ELIGIBLE PRODUCT Products that are defective or shipped in error may be returned.

AUTHORIZATION The customer should contact SPG to obtain a Return Material Authorization (RMA) number. The RMA number is required on all paperwork enclosed within the packaged and written on the shipping carton for easy identification upon receipt.

TAG & SHIP Each item being returned should be clearly tagged with the reason for the return. This will assist us in evaluating the product and provided a quicker return.

All products should be packaged to prevent damage in shipping. Product damaged during the return will be the responsibility of the customer. Return freight charges are the responsibility of the customer.

TIMING It is our goal to evaluate, process and complete each return at our earliest convenience. However, every item returned to SPG is tested and evaluated, so the larger the return, the longer it may take to complete our evaluation. Therefore, we strongly recommend not holding returns for extended periods of time.

DEFECTIVE PRODUCT All defective products must have an RMA issued by one of our technical support staff. To get an RMA please have your original purchase information available and contact the technical support staff. A technical support person will attempt to solve the problem over the telephone. If the technical support staff cannot troubleshoot the problem over the phone, an RMA number will be issued. The RMA number must be indicated on the outside of the returned package and a copy of the RMA worksheet should be within the package if applicable. The RMA is valid for 60 days after issued. Once we receive the product back testing will begin. It is important to note, the return should contain all contents originally shipped or testing will be delayed. If you have any questions on what should be returned, please contact the technical support staff.

Attn. Technical Department 9230 Conservation Way, Fort Wayne, IN 46809 P: 855.498.8324 F: 888.672.8024 E: support@firegearoutdoors.com

58

LIMITED WARRANTY Skytech Products Group (Firegear Outdoors) hereby warrants to the end user that products will be free from material and workmanship defects that prevent safe and correct operation of the product. The warranty commences from date of sale to the end user for the following period: CONSUMER/NON-COMMERCIAL APPLICATIONS: Stainless Steel Components Gas Valve, Spark Igniter & Electronic Parts LED Lights & Component Parts Log Sets Glass Windshields Glass Media Controls AnF Enclosures

Lava Rock and Lava Stones are not covered by warranty

5 Years 2 Years 1 Year 3 Years 5 Years 1 Year 5 Years 5 Years

COMMERCIAL APPLICATIONS: Stainless Steel Components Gas Valve, Spark Igniter & Electronic Parts LED Lights & Component Parts Log Sets Glass Windshields Glass Media Controls AnF Enclosures

Lava Rock and Lava Stones are not covered by warranty

1 Year 1 Year 1 Year 1 Year 1 Year 1 Year 1 Year

Travel, diagnostic cost, service labor to repair the defect and freight charges on warranty parts to and from the factory will be responsibility of the owner. We will not be responsible for labor charges and/or damage incurred in installation, repair, and replacement.

This Limited Warranty is voided if not assembled, installed and operated as intended. This Limited Warranty does not cover any defects due to accident, abuse, misuse, alteration, misapplication, vandalism, improper installation or improper maintenance or service, removal from the original location or reinstallation into another location, or failure to perform normal and routine maintenance.

Damage due to severe weather conditions such as hail, hurricanes, earthquakes, tornadoes, discoloration due to overheating, exposure to chemicals (including salt), either directly or in the atmosphere, or very high humidity, is not covered by this Limited Warranty.

There are no other express warranties except as set forth herein.

For consumer applications, any applicable implied warranties of merchantability and fitness are limited induration to the period of coverage of this Limited Warranty. Some states do not allow limitation on how long an implied warranty lasts, so this limitation may not apply to you.

End User must provide a bill of sale, canceled check, or payment record from the end user to verify purchase date and to establish warranty period. This Limited Warranty shall be valid and limited to the original purchaser only.

For Commercial applications, the liability of Firegear Outdoors is limited to the express terms of this warranty. We expressly disclaim any and all implied warranties, including any warranties of fitness for a particular purpose or merchantability.

WARNING Any modification to the product will void the warranty.

We are not liable for any special, indirect or consequential damages. Our maximum liability is limited to the purchase price of the purchased products. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusions may not apply to you.

This Limited Warranty shall be limited to the repair and/or replacement of parts that have proven to be defective under normal use and service. Before returning any parts, contact our Technical Service Department for a Return Materials Authorization (RMA) number. All warranty claims must be made by the OEM / Distributor / Dealer account on behalf of the end user. You may contact Technical Service at (855) 498-8324.

All approved returned defects must be confirmed by our Technical Service Department. If the defect is confirmed and we approve the claim, we will replace such parts without charge.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

We do not authorize any person or company to assume for it any other obligation or liability in connection with the sale, installation, use, removal, return, or replacement of its equipment; and no such representations are binding.

59

9230 CONSERVATION WAY FORT WAYNE, IN 46809 TECHNICAL SUPPORT: 1.855.498.8324 SALES SUPPORT: 1.888.672.8929 www.firegearoutdoors.com

FG-LIT-SPEC-17 60