Slayer Brothers 2019 Parts Catalog by Doug E

Slayer Brothers Parts Catalog 2019 Where we cut prices not quality

Catalog 2019-1

This catalog supersedes previous catalogs Slayer Brothers, LLC P.O. Box 55 Carlton, MN 55718 sales@slayerbrothers.com www.slayerbrothers.com

https://www.slayerbrothers.com/parts.html

218-409-9116 888-249-0220

INDEX

1. INDEX Section A. Door & Hatch Hardware 3-4. Handles – EXTERIOR & INTERIOR 5-8. Cab Latches 9. Hinges & Holders 10. Miscellaneous

Section B. Wiper Motors, Blades & Hardware 12-13. Wiper Motors 14. Wiper Parts & Window Washer Kits 15. Wiper Arms 16. Wiper Blades Section C. Electrical 18. Lights & Switches 19. Radio Housings & Fans Section D. Door & Window Molding 21. Door & Window Molding Section E. Helpful Data / Data Guide 23-28. Line Drawings 29. Wiring Diagrams – Wipers 30. About Us - FAQ

TERMS Payment: We accept PayPal, Visa, MasterCard, Discover and company check at time of order. Shipping: Parts shipped USPS. Part prices do not include shipping except when noted. Returns: No returns without prior authorization. No returns on special order items, sale items or electrical parts. No returns accepted after 30 days. MISCELLANEOUS: Slayer Brothers, LLC is not responsible for nondelivery or delay in delivery due to delays, damages or losses resulting from strikes, riots, fires, floods, or other accidents or occurrences beyond their control. Prices are subject to change without notice. Newest catalog version supersedes all others. DRAWINGS: All drawings and dimensions shown are for reference only.

To order, please contact: 218-409-9116 or 888-249-0220 sales@slayerbrothers.com www.slayerbrothers.com

Page 1

Updated 10/10/18

Section A Door & Hatch Hardware

Get current prices, check availability and purchase all of our parts online at: https://www.slayerbrothers.com

www.slayerbrothers.com Page 2

Updated 11/20/18

HANDLES Exterior NL1 Universal Non-locking exterior door handle. See website for Features a chrome finish, 5/16” shaft (.3125) and 1 ¾” current prices bolt hole spacing.

L1 Universal Locking exterior door handle. Features a chrome finish, 5/16” (.3125) shaft, 1 3/4” bolt hole spacing and two keys.

PLZN Padlock locking exterior door handle. Features a 5/16” shaft and hole for padlock. Zinc finish. Same as 5655ZN handle. Drawing available in Data Section.

L1.5 Locking exterior door handle with 1 1/2” bolt hole spacing. Features a chrome finish, 5/16” shaft and two keys. Fits a number of old tractors.

DHG1 Gasket. Exterior gasket for NL1 and L1 exterior handles.

Page 3

Updated 8/20/18

HANDLES Interior 354-I Inside door handle. Features chrome finish and Allen locking screw. Fits all 5/16” (.3125) shafts.

See website for current prices.

74-I Inside door handle. Features chrome finish, Allen locking screw and large curved design for better grip when pulling the door shut. Fits all 5/16” (.3125) shafts. Replaces CASE #E83236. 200-I Inside handle. Features chrome finish, Allen locking screw and compact design. Small inside handle is perfect for windows, hatches, panels or halfdoors. It's 3 1/2” long so a little small for a full-sized door. Fits all 5/16” (.3125) shafts.

D88773 Inside door handle. Fits CASE brand doors that use the D88773 inside handle. Accepts a 5/16” square shaft outer handle. NSN 2540-01-319-7893. No longer in production so we are one of the few companies that have them. Drawing available in Data Section.

DHG1 Gasket. Exterior gasket for NL1 and L1 exterior handles and D88773 interior handle.

Page 4

Updated 8/20/18

CAB LATCHES – Part 1 55-LH Cab Latch. The 55 cab latch is the most common latch used. Case dimensions are roughly 2”x3 3/8”. Zinc finish. Left hand shown.

See website for current prices

Drawing available in Data Guide section. 55-RH Cab Latch. The 55 cab latch is the most common latch used. Case dimensions are roughly 2”x3 3/8”. Zinc finish. Right hand shown. Drawing available in Data Guide section. 58-LH Cab Latch. The 58 cab latch is identical to the 55, except you need an inside handle. This gives the 58 more versatility. It can also be used without an inside handle as a panel latch. Case dimensions are roughly 2”x3 3/8”. Zinc finish. Left hand shown. 58-RH Cab Latch. The 58 cab latch is identical to the 55, except you need an inside handle. Replaces

55A-LH Cab Latch. The 55A cab latch is the larger version of the 55. Case dimensions are roughly 2 3/8”x4 3/8”. Zinc finish. Left hand shown. Drawing available in Data Guide section.

55A-RH Cab Latch. The 55A cab latch is the larger version of the 55. Case dimensions are roughly 2 3/8”x4 3/8”. Zinc finish. Right hand shown. Drawing available in Data Guide section. Not sure if you have a Left or Right hand latch? Need exact measurements? Visit our helpful data section at the end of this catalog for more detailed information.

Page 5

Updated 11/20/18

CAB LATCHES – Part 2 58-CASE Cab Latch. This 58-CASE cab latch replaces CASE part number F98122 and F89710. I have also used it to replace CASE part number F93107. Latch does not have the welded on nuts.

See website for current prices

Dimensions are roughly 2”x3 3/8”. Zinc finish. Drawing available in Data Guide section. 9015 Paddle Handle latch. Features a key lock and inside knob with override feature. Has four mounting holes. Case dimensions are roughly 3 5/8”x4 3/4”. Polished stainless steel. Drawing available in Data Guide section. 4901 Paddle Handle Latch. Features a key lock and inside knob. Case dimensions are roughly 4 1/4”x5 1/2”. Unpolished stainless steel. Rubber gasket available. Drawing available in Data Guide section.

I-4901 Paddle Handle Latch. Features a key lock and inside override knob. Case dimensions are roughly 4 1/4”x5 1/2”. Zinc finish. Rubber gasket available. Drawing available in Data Guide section. G-4901 Gasket. Rubber gasket to fit the 4901 and I-4901 paddle handles. JLG part number 91474417.

Visit our helpful data section at the end of this catalog for more detailed information. Page 6

Updated 11/20/18

CAB LATCHES â&#x20AC;&#x201C; Part 3 STR-1 Strike plate. Two position strike plate offers greater safety cab latches and paddle latches. (Not for rotary latches.) Has slotted holes for adjustment. R55001 Rotary Cab Latch replaces CASE R55001. Left hand shown. Complies with FMVSS 206 when tested with approved striker. NSN #2540012478640 Drawing available in Data Guide section. R55000 Rotary Cab Latch replaces CASE R55000. Zinc finish. Right hand shown. Complies with FMVSS 206 when tested with approved striker. NSN #2540012478641 Drawing available in Data Guide section. R55002 Rotary Cab Latch. Factory CASE NH part number R55002. Replaces F44925, 47109305, 4495165, 254177A1, 44995165 and 302660A1. Fits many of the new dozers and the W14B. Zinc finish. NSN #2540013298572. R55003 Rotary Cab Latch. Factory CASE NH part number R55003. Fits many of the new dozers and the W14B. Zinc finish. NSN#2540012993988 10646-16 Striker bolt. Approved striker bolt for 11442-16LH, 11443-16RH, R55002 and R55003 latches.

Not sure if you have a Left or Right hand latch? Need exact measurements? Visit our helpful data section at the end of this catalog for more detailed information.

Page 7

Updated 11/1/18

CAB DOOR REPAIR KITS Repair your existing door or use to build your own doors LHKIT-LOCKING Cab Door Repair Kit. See website for You get one (1) 55LH cab latch, one (1) locking door current prices handle with keys, one (1) rubber gasket for the door handle and one (1) striker plate. Door handle is for 1 3/4" hole to hole spacing. The striker plate can be bolted on (bolts not included) or welded on. This size latch and handle was used on many brands of machines, like CASE, IH, ASV, HOOD, etc. They were also used on most of the aftermarket brand cabs. RHKIT-LOCKING Cab Door Repair Kit. Same as above but with a RH latch.

LHKIT-NON LOCKING Cab Door Repair Kit. Same as above but with a non-locking handle and a LH latch.

RHKIT-NON LOCKING Cab Door Repair Kit. Same as above but with a non-locking handle and a RH latch.

Not sure if you have a Left or Right hand latch? Need exact measurements? Visit our helpful data section at the end of this catalog for more detailed information. Page 8

Updated 11/20/18

HINGES & HOLDERS

150G 150mm weld-on hinge with grease zerk.

See website for current prices

See Data section for mounting options.

Other sizes and styles available by special order. 35SS Stainless steel cane bolt. Can be used for left or right side mounting. Perfect for holding doors, panels or windows. Base is 3.5” long.

5602.5ZN Heavy duty door holder. Spring loaded, all metal door holder with grease zerk. For holding doors open against the side of the cab. Drawing available in Data Guide section. PDH-S Steel door stop/holder. Comes with both pieces and the rubber insert. Silver in color. Has less holding power than the 5602 holder. Similar to factory Case holder.

RDS-238 Rubber door stop. 2 3/8” long with 3/8” stud. Comes with nut and washer.

Page 9

Updated 11/1/18

MISCELLANEOUS 13X5SS Polished stainless steel grab handle. Perfect for cab door or wall post. 1/2” diameter by 13.25” long. Has 4 mounting holes. It's nice!

See website for current prices

MCR Switch mounting cup. Allows you to install a switch into the dash with access to the wiring. Makes putting a switch into a dash panel easy work.

Page 10

Updated 11/1/18

Section B Wiper Motors, Blades & Hardware

You can now buy our parts directly from the Slayer Brothers website. www.slayerbrothers.com

The unwise man is awake all night worries over and again. When morning rises he is restless still, his burden as before. - The Havamal (Book of Viking Wisdom)

www.slayerbrothers.com Page 11

Updated 8/20/18

WIPER MOTORS - 1 Universal 2-Speed 12 Volt Wiper Motor

Marine grade 12 volt 2-speed wiper motor features an adjustable wipe angle and will park to the right or left. Wiper switches available on the switch page. Uses 1/2” drum arms. This wiper motor was used on a wide variety of OEM equipment and aftermarket cabs. It also replaces WEXCO and AFI wiper motors. This is a “famous maker” wiper motor we purchased directly from the factory to save you money! Comes with complete instructions. K4R1.12 / 12 volt 2-speed wiper motor with 1 1/2” shaft

See website for current prices

Universal 2-Speed 24 Volt Wiper Motor

24 volt 2-speed wiper motor features an adjustable wipe angle and will park to the right or left. Wiper switches available on the switch page. Uses 1/2” drum arms. This wiper motor was used on a wide variety of OEM equipment and aftermarket cabs. It also replaces WEXCO and AFI wiper motors. This is a “famous maker” wiper motor we purchased directly from the factory to save you money! K4R1.24 / 24 volt 2-Speed wiper motor with 1 1/2” shaft. Detailed wiper motor information is available in the Data Guide section. Switches available in the Electrical Section.

Page 12

Updated 8/26/18

WIPER MOTORS - 2 12/24 Volt Bracket Style Wiper Motor Kit

12 or 24 volt, 2-speed coast-to-park wiper motor. Comes with wiper motor, bracket, 1.125” drive arm, 3.38” drive link, (2) clips and (2) washers. Instructions for installation and wiring are included. Wipe angle is adjustable using the different holes in your pivot shaft (70°-110°). Other arms and links are also available for altering the wipe angle. KMB/12 KMB/24

Page 13

Updated 8/27/18

WIPER PARTS

308-1005 Adj. Drive Arm Kit 35°-70° range of adjustment

300795 1.25” Pivot Shaft

Note: Other shaft lengths and drive arms are available by special order.

200241 Pantograph Adapter. 1.25” WMC1 Wiper motor cover that fits all Wexco, AFI and other center to center pivot distance wiper motors. Gives your dash a cleaner look. Windshield Washer Parts

12WASKT Washer Kit / 12 Volt 24WASHKT Washer Kit / 24 Volt 1.5 liter bottle with pump and bracket

Page 14

WK1 Wet Kit Converts your dry wiper arm to a wet arm. May vary from photo shown

Updated 9/1/18

WIPER ARMS For 1/2” Drum Splines Fits many factory motors plus Wexco, Bosch and AME using the 1/2” drum.

Adjustable radial arm with J-hook end. Length and end section adjusts for a perfect fit. Uses our Universal Wiper Blades.

Adjustable pantograph arm with 13.6mm saddle end. Length adjusts for a perfect fit. Uses our OEM Wiper Blades. No adapter needed!

For Double Flat Shaft with 3/8” Tapered Spines Fits bracketed style wiper motors, UT/JE, Bosch, WEX, J3, etc.

201559 16” Radial Dry

201561 20” Radial Dry

201560 18” Radial Dry

200461 16” Panto Dry

200464 22” Panto Dry

200462 18” Panto Dry

200467 28” Panto Dry

200463 20” Panto Dry

Page 15

Updated 11/20/18

WIPER BLADES Narrow Saddle Mount Blades

Fits .200 and .250 width arms used on many older tractors.

OEM - 13.6 mm Saddle Mount Blades

Fits 13.6mm width arms used as OEM on trucks, buses and newer heavy equipment. 13416 16” Blade

13422 22” Blade

13418 18” Blade

13724 24” Blade

13420 20” Blade

13728 28” Blade

Universal Mount Blades

Fits a variety of mounts including J-hook. UNV16 16” Blade

UNV20 20” Blade

UNV18 18” Blade

Washers, wet kits, switches and wiper motors are available

Page 16

Updated 11/1/19

Section C Electrical

You can now buy our parts directly from the Slayer Brothers website. www.slayerbrothers.com

Bare is his back who has no brother. - Grettir's Saga

www.slayerbrothers.com

Page 17

Updated 11/1/19

LIGHTS & SWITCHES LED1224 12 volt/24 volt LED flood light. Heavy duty aluminum body with stainless mounting hardware. Light is 4”x4” with 16 LED's, 48 watts and a 60 degree flood pattern. Mounting area needed is 5”x6”. This light will work on 12 or 24 volt systems.

311-2 Round wiper switch. For one or two 12 volt or 24 volt wiper motors. Includes washer position. Wiring information in Data section. RS1 Lighted Rocker Switch. For one or two 12 volt or 24 volt wiper motors. For 24 volt you must use a 600 ohm resistor to keep the internal LED light from burning out. Wiring information in Data section. WS1 Lighted Washer Switch. For 12 volt or 24 volt washer pumps. For 24 volt you must use a 600 ohm resistor to keep the internal LED light from burning out. Wiring information in Data section. WMS Wiper motor switch. This 2-speed switch attaches directly to your Wexco, AFI or Slayer Brothers wiper motor. For 12 or 24 volt motors. (Wiper motor not included) Wiring information in Data section.

Page 18

Updated 11/1/19

RADIOS HOUSINGS & FANS

76SRH Radio Housing. This roof mounted housing comes complete with heavy duty speakers for industrial use. Perfect for tractor, dozer or any heavy equipment cab. Just add your own radio and external antenna. Accepts DIN style radios (without knobs).

77SRH Radio Housing. Roof mounted or under dash housing holds 2-shaft and DIN radios or can be used to house a CB radio.

12 volt high quality 7” fan with built-in switch 2 speeds All metal construction .6 amp on low, .9 amp on high 24 volt high quality 7” fan with built-in switch 2 speeds All metal construction .6 amp on low, .9 amp on high

Page 19

Updated 11/1/19

Section D Door & Window Molding

You can now buy our parts directly from our website. www.slayerbrothers.com

Ill it is when men, with smooth talk, sidestep what is just and good. - Heitharvega Saga

www.slayerbrothers.com Page 20

Updated 11/1/18

MOLDING DOOR MOLDING ST-5/8 Straight bulb seal with 5/8” diameter bulb. Fits 12-16 gauge panel or lip. This is the most common size of bulb seal used to seal doors and panels requiring a straight seal. 90-5/8 90° bulb seal with 5/8” diameter bulb. Fits 12-16 gauge panel or lip. This is the most common size of bulb seal used to seal doors and panels requiring a 90° seal.

WINDOW MOLDING AS987 Window Rubber. For mounting 1/4” safety glass or polycarbonate into cab skin. Fits skin thickness of 12-16 gauge. Drawing available in the Helpful Data Section at the end of the catalog.

Page 21

Updated 11/15/18

Section E Helpful Data NOTE: All drawings and dimensions shown in this catalog are for reference only.

You can now buy our parts online day or night! www.slayerbrothers.com

Wisdom is welcome wherever it comes from. - Bandamanna Saga

www.slayerbrothers.com Page 22

Updated 11/1/97

HELPFUL DATA – Part 1

Page 23

Updated 11/1/19

HELPFUL DATA â&#x20AC;&#x201C; Part 2

What latch do I need? As you approach the door from the outside, if the hinge is on the left, it should take a left hand latch. Always match your hardware to the photos and drawings to make sure because there are exceptions to every rule!

Page 24

Updated 11/1/19

HELPFUL DATA - Part 3

Page 25

Updated 11/1/19

HELPFUL DATA - Part 4

Page 26

Updated 11/1/19

HELPFUL DATA - Part 5

Page 27

Updated 11/20/18

HELPFUL DATA - Part 6

Page 28

Updated 11/1/18

WIRING DIAGRAMS - Wipers

Page 29

Updated 11/1/19

ABOUT US - FAQ Our low prices are achieved by ordering parts in very large quantities and paying our suppliers upfront. It's how we do business. Q. Who can order from Slayer Brothers, LLC? A. We are happy to sell to individuals or businesses and there is no minimum order. Q. Can I buy your parts online? A. Yes! You can get all of our parts online at www.slayerbrothers.com We also list a few of our parts on ebay and ebluejay. PLEASE NOTE: Other dealers have tried to steal our photos and listings! If it isn't sold under the Slayer Brothers â&#x201E;˘ i.d., it is a fake or theft. Q. I need an item but it's not in your catalog, can you help? A. In many cases we can. Call or email with your request. Q. Do you have a printed catalog? A. No. You can currently view our catalog online or download it to your computer as a PDF file. Q. What options do you offer for shipping? A. We ship by USPS and UPS. Flat Rate Priority Mail is currently the cheapest and fastest option for parts if you can provide a mailing address.

Our office staff will exhaust itself finding you a great deal on parts!

www.slayerbrothers.com Slayer Brothers, LLC PO Box 55 Carlton, MN 55718 218-409-9116 / 888-249-0220

Page 30

Updated 11/1/18