ss-swistherm

Page 1

Swistherm

Above: Crown Heights, Basingstoke B3 Burgess Architects Left: Centrium House, Woking Barratt Homes

The Swistherm System A lightweight, thin-coat insulated render system primarily suited to new build applications, designed to satisfy differing substrate conditions and building height requirements. Insulation slabs are adhesive and mechanically fixed direct to a continuous substrate and faced with a durable, decorative top-coat - Silicone render is used for enhanced overall performance, with Mineral renders available as the eco-friendly option. Both finishes can be applied with rolled or dragged surface texture, in a wide range of colours. Applications • For new build applications, where the structure provides continuous support for the insulation slabs • Suitable for remodeling and specialist façade treatment details • For unrestricted use on buildings up to 6 storeys and high rise applications, subject to Alumasc’s high rise policy

Performance • BBA approved, fully warranted system with

life expectancy in excess of 30 years

• Manufactured to ISO9001:2000 and ISO14001:2004 Quality and Environmental Management standards • Fully weather resistant, whilst remaining vapour permeable

• Eliminates cold bridging, condensation and mould growth • Protects the structural fabric, limiting movement and thermal shock and freeze-thaw cycles associated with traditional brickwork façades • Highly resistant to impact damage • Rated Class 0 for surface spread of flame • Fire tested to comply with BRE 135 93/2914

00/3766

93/2895

Tradewinds Development, London Denning Male Polisano Architects

Technical expertise and tailored project support

• Allows the fabric of the building to act as a heat store, increasing thermal efficiency

06/4297

Lymm Water Tower, Cheshire Ellis Williams Architects

97/3410

Design & Specification Support Detailed design meetings, project specific elevational colour schemes, CAD drawings and product samples

Calculations Thermal calculations, condensation risk analysis, wind loading calculations (for high rise projects)

Specification Support Detailed specification (to NBS format), health and safety sheets and product data sheets

Installation, Aftercare & Warranties Application by Alumasc approved contractors, Alumasc on site support, routine maintenance requirements, full package of warranty options

April 2008

ALUMASC EXTERIOR BUILDING PRODUCTS LTD White House Works, Bold Road, Sutton, St Helens, Merseyside, WA9 4JG, United Kingdom Telephone: +44 (0)1744 648400 Facsimile: +44 (0)1744 648401 Email: info@alumasc-exteriors.co.uk Web: www.alumascfacades.co.uk


Swistherm 3

Typical System Components

8

1

1 7

2

9

5 6

Solid Blockwork Substrate Aluminium Beading

ST1 Composite Mortar (used to adhere insulation slab)

High Density Mineral Wool Insulation Slab

3

4

4

2

Rolled Texture Finish

Dragged Texture Finish

7

Glassfibre Scrim (bedded into ST1 Composite Mortar)

8

ST Render Primer (to match silicone topcoat colour)

9

ST Silicone Render (available in a wide range of colours and textures)

5

Approved Mechanical Fixing

6

ST1 Composite Mortar (used as a reinforcing layer)

Render Finishes Lightweight, through-coloured Silicone and Mineral render finishes, provide a wide variety of design options. Both are available in rolled or dragged surface textures in a range of grain sizes and in a wide choice of colours from the Alumasc Colour System.

Colour Options

Alumasc Colour System Wide Range Available

ST Silkolitt Silicone Render 1.5; 2.5; 3.5mm Grain Sizes

ST Silkorill Silicone Render 2; 3mm Grain Sizes

ST Mineral K Render 2; 3; 4mm Grain Sizes

ST Mineral R Render 2; 3; 4mm Grain Sizes

Insulation Options

Table A Insulation Choice

• A choice of insulation materials are available, in thicknesses to achieve very low U-values • The insulation is mechanically fixed direct to the continuous substrate •

An eco-friendly Swistherm system is available, comprising Mineral Wool or Cork insulation, with Mineral render finish

06/4297

00/3766

93/2914

93/2895

Table C Construction Types

Swistherm

EPS

Solid Structure

Cork

Masonry

Mineral Wool

Concrete

Phenolic

-

Framed Structure

Polyisocyanurate (PIR)

-

Steel Frame

Concrete Frame

Table B Render, Coatings, Finishes

97/3410

Swistherm

Modular Timber Frame

Silicone Render

SIP’s

Mineral Render

Steel Frame

Polymer Dashing Render

-

Thin Joint Blocks

Polymer Plain Render

-

MMC

Rendabrick

-

Ecobuild

Traditional Brick Slips

-

Passive House

Silicone Façade Paint

Rammed Earth

Masonry Paint

-

Clay Blocks

Swistherm

April 2008

ALUMASC EXTERIOR BUILDING PRODUCTS LTD White House Works, Bold Road, Sutton, St Helens, Merseyside, WA9 4JG, United Kingdom Telephone: +44 (0)1744 648400 Facsimile: +44 (0)1744 648401 Email: info@alumasc-exteriors.co.uk Web: www.alumascfacades.co.uk


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.