Polymer Dashing Render
Above: Wombwell BISF Houses, Barnsley Barnsley MBC Left: Bishop Auckland Hospital Percy Thomas Partnership
M.R. S7 Polymer Dashing Render A premium, one-coat polymer cement dashing render, available in nine standard colours, complemented by a wide choice of aggregates dash finishes. A high performance alternative to traditional sand and cement for use where a traditional, low maintenance finish is required. Suitable for use in render only applications or as part of an external wall insulation system.
Applications • Suitable for single coat application to most substrates • It is good practice to apply over M.R. S3 base coat on brick and blockwork • Compatible with Alumasc’s Swisslab and Swisspan external wall insulation systems
Performance • BBA approved, fully warranted system with 30 year
life expectancy
• Manufactured to ISO9001:2000 and ISO14001:2004
Quality and Environmental Management standards
• Fully weather resistant whilst remaining vapour
Technical expertise and tailored project support
• An increased bond strength when compared to sand and cement
• Resistant to cracking and crazing • Highly resistant to impact damage • Non-flammable when cured • Class 0 surface spread of flame
•
93/2914
97/3410
• Installation, Aftercare & Warranties
Application by Alumasc approved contractors, routine maintenance requirements, full package of warranty options
Project specific elevational colour schemes, CAD drawings and product samples
• Specification Support
00/3766
Design & Specification Support Thermal calculations, condensation risk analysis, wind loading calculations (for high rise projects)
• Design & Specification Support
06/4297
Maes Mabon, Mid Glamorgan Caerphilly CBC
permeable
• Durable and lightweight
Haley/Range/Ackroyd Courts, Halifax Pennine Housing 2000
Detailed specification (to NBS format), health and safety sheets and product data sheets
93/2895
April 2008
ALUMASC EXTERIOR BUILDING PRODUCTS LTD White House Works, Bold Road, Sutton, St Helens, Merseyside, WA9 4JG, United Kingdom Telephone: +44 (0)1744 648400 Facsimile: +44 (0)1744 648401 Email: info@alumasc-exteriors.co.uk Web: www.alumascfacades.co.uk
Polymer Dashing Render Typical System Components 3 6
1
Solid Blockwork Substrate
2
Pack Size
25 kg bag
Powder Coated, Galvanised or Stainless Steel Beading
Mixing Ratio
5- 5.6 litres of clean cold water per bag
3
Scrim Adhesive (used as a reinforcing layer)
Coverage
Up to 2.5m² per bag (based on 8mm thickness)
4
Alkali-resistant Glassfibre Scrim (bedded into M.R. Scrim Adhesive)
4
Render Coverage
1
5
2
5
6
Colours and Textures
Coverage rates stated are for guidance only and depend on background substrate and consistency of mix. Contractors should always
M.R. S7 Polymer Dashing Render (available in a range of colours)
verify the coverage rate according to the specific characteristics of each individual project and product.
Aggregate Dash (available in a range ofcolours)
M.R. S7 Dashing Render in 9 standard colours
White
Grey
Pink
Cream
Yellow
Russet
Peach
Red
Brown
Aggregate Dash 15 standard dash finishes
Arcane on Peach
Polar White on White
Buff Quartz on Cream
Permwhite Calcine on White
Hazel on Brown
Derbyshire Spar on Cream
Fawley Gravel on Yellow
Harvest on Cream
Luxovite on Yellow
Red and White on Extra White
Black and White on White
Champagne on Cream
Durite Canterbury Spar on Pink
Ledmore Marble on Grey
Westbere on Grey
April 2008
ALUMASC EXTERIOR BUILDING PRODUCTS LTD White House Works, Bold Road, Sutton, St Helens, Merseyside, WA9 4JG, United Kingdom Telephone: +44 (0)1744 648400 Facsimile: +44 (0)1744 648401 Email: info@alumasc-exteriors.co.uk Web: www.alumascfacades.co.uk