Granny Shack | Presentation Booth How-to Guide

Granny Shack p r e s e n tat i o n b o o t h

‘How-to’ instructions February 2012

p r i c e c a l c u l at i o n s 2 ” x 3 ” - 8 ’ — 9 p i e c e s @ $ 1 . 9 2 4 ’ x 8 ’ p l y w o o d Rigid angle connectors—19 pieces @ $ 1.98 S t a i r c o n n e c t o r s — 4 p i e c e s @ $ 5 . 8 5 1-1/2” angle connectors—6 pieces @ $ 0.58 3 ” a n g l e c o n n e c t o r s — 1 2 p i e c e s @ $ 1 . 2 3 H i n g e — 2 s e t s @ $ 2 . 5 8

= = = = = = =

$ $ $ $ $ $ $

17.28 12.57 37.62 23.40 3.48 14.76 5.16

TOTAL = $ 1 1 4 . 2 7

L i n k s : u s e yo u r s m a rt p h o n e to s c a n Q R c o d e s b e l o w to v i s i t t h e p ro j e c t ’ s w e b s i t e pa g e s .

1.

Buy 1 piece of 4’ x 8’ plywood with 3/4” minimum thickness & 8 pieces of 1 1/2” x 2 1/2” dimensional lumber.

2.

Cut the plywood with 2 diagonal cuts from one corner to the midpoint of the opposing side. Cut 3 pieces of the dimensional lumber exactly in half.

3.

Glue the 2 right triangle pieces together so you have 2 triangles with congruous dimensions. Combine the dimensional lumbers into 3 frames using ‘sandwich rigid-angle’ connectors.

4.

Use stair angle connectors to connect the 2 plywood triangles into one of the lumber frames by putting the triangles into vertical positions.

5.

Connect the remaining 2 lumber frames by positioning them perpendicular against the base frame.

6.

Use these 2 perpendicular frames as a handle to tilt the object in its entirety 90 0 into upright position.

7.

Reposition the perpendicular frames into your desired positions.

I m p o rta n t : move one frame at a time. Make sure to fasten and properly connect a repositioned frame before you reposition the other.

8.

Using scrap objects you can find, reinforce the strength of each lumber frames’ corners.

Improvise!

Version

1

(November 19th, 2011) Granny Shack

Version

2 (December 12th, 2011) Presentation Booth