Tool Expo Saturday, November 18, 2023
TOOL S LE & EXPO
Was $559.00 NOW
$
52900
SATURDAY! 8AM - 2 PM
8-1/2” Slide Compound Miter Saw #LS815F. Powerful 10.5 AMP direct drive motor requires less maintenance and delivers 5,000 RPM. Miters 0°- 50° left and 0°60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 50° (left and right) plus 60° (right).
Was $629.00 NOW
$
Professional Contractors, Craftsmen, and Homeowners will find our top tool manufacturers showing their newest and most innovative products.
58900
10’ Compound Miter Saw #LS1018. Large cutting capacity in a compact design and less weight. Powerful 13.0 AMP direct drive motor requires less maintenance and delivers 4,300 RPM. Miters 0° - 47° left and 0° 60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° (left and right). Cuts up to 12” at 90° and 8-1/2” at 45°. Linear ball bearing system engineered to deliver "dead-on" accurate cuts.
Was $699.00 NOW
$
Plus, there will be instant rebates with “Makita Bucks” on select Makita tools.
67900
10" Dual-Bevel Sliding Compound Miter Saw with Laser #LS1019L. With up to 6-5/8” capacity (crown molding, nested) jobs like cutting base-boards and crown molding are a snap. It can cut 4x4 dimensional lumber in one pass. It's ideal for fine woodworking, carpentry, general construction, and more. 15 AMP direct drive motor.
Was $889.00 NOW
$
86900
NEW
12" Dual-Bevel Sliding Compound Miter Saw with Laser #LS1219L. Unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. Increased vertical cutting capacity of baseboard (6-3/4”) and crown molding (8” nested). It will also make 15” crosscuts at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right).
Was $255.00 NOW
$
Was $245.00 NOW
$
15900
Quiet Series 1/2 HP Electric Air Compressor #MAC100Q. 1 Gallon Compact, Oil-Free, Electric Air Compressor features a Quiet Series Design, combining strong performance with lower noise. At only 58 dBA, it’s ideal for indoor use during case and base installation, trim and finish carpentry, cabinet or furniture making, and more. The MAC100Q runs at a lower RPM, resulting in longer motor and pump life. It is powered by an efficient 1/2 horsepower induction motor that provides up to 135 PSI. It also features a lightweight design (only 25.5 lbs.) for increased portability.
23900
Folding Miter Saw Stand #WST06. #WST06. Compact and lightweight (only 33.7 lbs.), With transport wheels and side handle that allows the miter saw and stand to be transported around the job site. Material support extensions that extend up to 100-1/2” with a maximum supported weight of 500 lbs.
Was $245.00 NOW
$
22500
Compact Air Compressor Was $385.00 NOW
#AC001. Powerful 1/6 maximum horsepower induction motor provides up to 125 PSI. Lightweight design (23.1 lbs.) for increased job site portability. Low noise for operator comfort; ideal for indoor use. Low AMP draw reduces incidents of tripped breakers at start-up.
$
37500
2.5 HP Compressor #MAC2400. Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance. Powerful 2.5 HP 4-Pole motor produces 4.2 CFM at 90 PSI for increased productivity.
Was $469.00 NOW
$
Was $265.00 NOW
44500
$
3 HP Compressor #MAC5200. Cast iron pump with big bore cylinder and piston is engineered to provide faster recovery time for improved performance. Powerful 3 HP motor produces 6.5 CFM at 90 psi for increased productivity. Pump is oil-lubricated for cooler running temperatures E NT E NN I A L& UR C and reduced wear. Durable BE GO N I cast iron cylinder reduces wear and increases pump life; removable for easy maintenance. Folding handle with low-profile design for easy L storage with handle folded. 0% LOCA R
-Y
OU R
L O C A L L U MB
RA T
EB
NC
D
BE
SI
M
ER YA R
The right information. The right materials. The right lumberyardsm
LU
★
RK
10
M EA D C L A
★ CEL
YEARS
★
9 12
#MAC700. Low Noise, Low AMP Draw and High Output. Powerful 2.0 HP 4-Pole motor produces 3.3 CFM at 90 PSI for increased productivity.
ND
E1
2 HP Compressor
YO
111
25900
LUMBER AND BUILDING
MATERIALS SINCE 1912
Hearn Ave. & Dowd Dr. H Santa Rosa H 707-576-3333 H www.meadclark.com H Monday thru Saturday 7 AM to 5 PM Visa, Discover, Mastercard & American Express Welcomed H All items FOB yard and store - limited to stock on hand H Prices may vary after November 30, 2023 We reserve the right to correct printed errors H Photographs represent merchandise offered, but may not be exactly as shown H ad design ©2023 AdverGraphics
ilwaukee Buy any M lade(s) get Saw B Circular or lessor value ual q e f one o
FREE hand stock on Limited to
$
1167 6-/12” 24T #41-0620 $ 99 8 7-1/4” 24T #41-0720
$
21900
3 pc Finish Nailer Kit #506538M. Includes: NT50AE2 2-Inch 18-Gauge Brad Nailer for trim work, NT65MA4 15 Gauge 2-1/2 Inch Angled Finish Nailer is the ideal finish nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. AND, N3804AB3 18 Gauge 1/4-Inch Narrow Crown Stapler is ideal for internal and external trim work, furniture, cabinetry, etc.
$
Was $102.85 NOW
Was $129.99 NOW
$
11299
23 Ga. pin Nailer #NP35A. Micro pin nailer fires 23-gauge headless pins which produce near invisible holes. The magazine automatically adjusts to 5/8 In., 3/4 In., 1 In., 13/16 In. and 1-3/8 In. May be used in a variety of applications including cabinets, paneling, small moldings and trim.
5999
18 Ga Brad Nailer #NT50AE2. The ideal tool for small carpentry projects. This pneumatic brad nailer will help you tackle everything from cabinet installation and picture-frame assembly to furniture construction and finish work. Accepts 5/8 In. to 2 In. 18-gauge fasteners. Was $179.99 NOW
$
Was $115.99 NOW
13699
NOW
13999
1099
45999
#C10FSHSM. Belt driven motor with soft start and overload protection. Adjustable laser guide for precise cutting. Left and right positive stops on miter gauge located at 0, 15, 22.5, 31.6 and 45 deg. Dust collection system. Standard equipment saw, 10 in TCT saw blade, dust bag, 10 mm box wrench and vice assembly.
$
3317 10” 24T #40-1020
$
1999
Shockwave Right Angle Adapter
#4507. 12 piece. Stainless Steel Sleeve extends for improved fastener stability. Magnet holds fasteners to the drive guide. C-ring retains the insert bit.
Was $33.00 NOW
$
Was $25.69 NOW
Shockwave Magnetic Drive Guide Set
6233 10” 80T #40-1032 $ 7733 12” 100T #40-1228
10” Compound Slide Miter Saw
#NT65MA. 4.2 lbs, lightweight and well balanced. 5-gauge nails from 1-1/4-in Up to 2-1/2in In length. Ideal for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases.
$
$
Was $549.00
15 ga. Angle Finish Nailer
Was $14.79 NOW
8999
#N3804AB. Ideal tool for internal and external trim, furniture, cabinet work and other finish applications. Accepts 1/2 in. to 1-1/2 in. 18-Gauge, 1/4 in. crown staples. Selective actuation switch lets the user select bump fire actuation or sequential fire for exact staple placement.
16 ga. Finish Nailer
$
2183 6-1/2” 40T #40-0622 $ 1867 7-1/4” 40T #41-0726 $ 4683 10” 60T #40-1028 $ 6917 12” 80T #40-1224
1/4” Narrow Crown Stapler
#NT65M. It is ideal for installing molding, chair rail, cabinetry and other fine finish applications. Accepts 16-gauge finish nails in lengths ranging from 1" up to 2-1/2" and is equipped with Hitachi's signature air duster button to conveniently blow away dust and debris instantly to clear the work surface.
Was $176.99 NOW
$
$
#322390. Optimized Internal Shockzone absorbs peak torque and prevents breaking 1.4" Slim Profile for tight access.
$
Was $56.49 NOW
99
25
$
4167 10” 40T #40-1024
$
5299
Right Angle Attachment
Knuckle Attachment
#49228510. Ideal for cordless drills and uses standard 1/4- inch hex accessories. This adapter can handle up to 235 in.lbs. of torque.
#2301. 11 piece set. 30 degree locking pivot position provides maximum access in hard to reach areas. Ten assorted impact duty bits.
$
$
00
67 #22-9407 SAE $ 00 #22-9406 SAE Ratching Was $157.67 NOW 127 $ 00 #22-9506 Metric Ratching Was $157.67 NOW 126 $ 00 #22-9429 SAE Ratching Flex Head Was $210.00 NOW 168
Was $83.33 NOW
4333 10” 50T #40-1026 $ 5183 12” 60T #40-1222
7pc Combo Wrench Set 7 piece sets come in a portable, locking storage tray, offering organization both on and off the jobsite. SAE 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4” to 3/4”. Metric 8, 10, 12, 13, 14, 15 & 17mm.
%FF
25
O ck on in-sto 25% off ee single k u a Milw s! wrenche
12500 #22-9415 SAE $ 00 #22-9416 SAE Ratching Was $279.00 NOW 241 Was $149.00 NOW
$
15pc Combo Wrench Set - SAE
$
6233 7-1/4” 4T #40-7000 $ 10350 10” 6T #40-7010
15 piece sets come in a storage tray designed for Long-Term Storage, keeping your tool chest organized. SAE 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, & 1”
$
Cutting-edge measuring tape blade technology, combined with a fully-reinforced impact-resistant frame makes Milwaukee Tape Measures the most durable retractable tape measure for all your jobsite needs.
1299 5m/16’ Metric Auto Lock Tape Reg. Price $16.00 #48226817 $ 1799 25’ Compact Mag Tape Reg. Price $22.59 #48220325 $ 2599 25’ Wide Blade Mag Tape Reg. Price $29.29 #48220225M $ 2799 25’ Stud Mag Tape Reg. Price $32.45 #48229725M $ 2799 30’ Wide Blade Tape Reg. Price $31.99 #48220230 $ 2799 35’ Compact Mag Tape Reg. Price $31.85 #48220335 $ 3799 35’ Stud Tape Reg. Price $41.99 #48229735
The right information. The right materials. The right lumberyardsm
LUMBER AND BUILDING
An anti-friction coating keeps the blade cool while cutting and resists corrosion & gumming. Laser cutting technology creates the blade from 100% sheet steel to ensure a stable blade that increases cutting accuracy. Laser cut vibration slots minimize wobble and warping during use.
MATERIALS SINCE 1912
Hearn Ave. & Dowd Dr. H Santa Rosa H 707-576-3333 H www.meadclark.com H Monday thru Saturday 7 AM to 5 PM Visa, Discover, Mastercard & American Express Welcomed H All items FOB yard and store - limited to stock on hand H Prices may vary after November 30, 2023 We reserve the right to correct printed errors H Photographs represent merchandise offered, but may not be exactly as shown H ad design ©2023 AdverGraphics
SAVE THE DATE: TOOL EXPO 11/18/23
TOOL S LE NOW
$
50
8
$
pair
1575 pair Advanced Impact Demolition Gloves
Open Cuff Flexible Utility Work Gloves #T-04151(M),#T-04173 (XL) The open cuff design allows for easy slip-on and removal, and for added convenience, they are touch screen compatible, washable, and breathable.
Was $34.99 NOW
$
$
100% Genuine Leather-Palm Gloves
ANSI 2 Impact-Rated Demolition Gloves
1450 pair
$
$
7499
$
#DML811. Cordless or corded operation, and provides bright and even illumination for work spaces. At full brightness it provides 3,000 lumens of light, and 750 lumens on low mode.
Was $189.00 NOW
$
#FPRO16XP. Ideal for the professional carpenter or woodworker. A dependable general use gun capable of driving 16-gauge finish nails 1-1/2” – 2-1/2” in length.
5699
40V LED Flashlight Bare #ML001G. Provides 160 Lumens. Up to 55 hr of continuous illumination on a single charge (40 V max XGT® 4 Ah battery, sold separately). The 12-position pivoting head provides a range of light direction. With metal hang hook.
23999
18V LXT® Lithium-Ion Cordless/Corded Work Light, Bare #DML809. 3-mode operation: delivers 10,000 lumens High, 4,000 on medium, and 2,000 on Low. Dust / water-resistant construction (IP65 rated) for improved operation in harsh job site conditions.
Was $95.00 NOW
$
8299
Was $229.99 NOW
NOW
$
21500
21500
15 Ga. 2-1/2” Finish Nailer with Case #FPRO42XP. Great durability and superior performance. Lightweight magnesium main body. Uses: baseboard, cabinets, chair rail, decorative trim, door casings, paneling, trim, & window casings.
Was $289.99 NOW
$
26900
18Ga. 2-1/8” Brad Nailer
18 Ga. Stapler
#ML002G. Three lighting modes: 360 Degrees lantern, 180 Degrees lantern, and flashlight mode. The efficient 40V Max XGT 4 Ah Battery (sold separately) For convenience, use the built-in USB port for charging portable electronic devices.
#FPRO25XP. Drives both slight and medium headed 18-gauge brads from 5/8-in to 2-1/8-in into the hardest woods. Includes case.
#SLS25XP. 1/4” Crown, 1-1/2” Medium Wire Stapler. Ultra-light (2.67 lbs.) for ease of handling. Adjustable depth of drive.
Was $349.00 NOW
31100
#TN11L1. NeverLube® oil-free design, the tool never needs to be lubricated, eliminating stains to the work surface. Pin nailer allows you to fasten intricate millwork, casing, and other pieces of trim without splitting or requiring any touch up work. This 23-gauge headless pinner drives 1/2” to 2” pins through dense hardwoods commonly used in various moldings.
33999 L&
111
BE
YEARS -Y
OU R
L O C A L L U MB
NC
SI
D
M
ER YA R
The right information. The right materials. The right lumberyardsm
LU
★
RK
CAL
100% LO
R
EB
E NT E NN I A
M EA D C L A
★ CEL
UR C
★
9 12
GO
ND
E1
IN
YO
RA T
18V LXT® Lithium-Ion Cordless Tower Work/Multi-Directional Light, Bare #DML814. Extends to an overall height of 7-1/4 feet. Delivers 3,000 /1,700 /900 lumens on High / Medium / Low settings. Get up to 10 hours of continuous illumination with one 18V LXT 5.0Ah Battery on low and up to 3 hours on high (battery and charger not included).
$
23 Ga. 2” Pin Nailer
BE
$
Was $259.99
$
40V Led Lantern Bare
1 Starter Kit and #ADBL1840B Battery with purchase of #DML814. Limited to stock on hand. Was $399.00 NOW
17500
16 Ga. 2-1/2” Finish Nailer
Was $63.99 NOW
$
17500
1/2 HP 1 Gal Compressor
12499
$
$
#PC1010N. The lightweight and compact design ensure easy portability combined with the ultra-quiet operation makes this the perfect finish and D6 trim unit. Long life induction motor and oil free pump design eliminate the need for oil or regular maintenance.
#DML805. Compatible with Makita 18V Lithium-Ion slide style battery. (Not included) At full brightness it provides 750 lumens of light, and 450 lumens on low mode. Adjusting knobs enable the user to direct the light to the desired angle.
99
FREE #ADBL1840BDC
Was $225.00 NOW
18V LXT® Lithium-Ion Cordless Corded LED Work Light, Bare
18V LXT® Lithium-Ion Cordless/Corded LED Work Light, Bare
Was $329.00 NOW
5999
Was $149.00 NOW
#DML807. 360° lantern mode provides 710 lumens. Built-in USB port for charging portable electronic devices.
169
Plus, there will be instant rebates with “Makita Bucks” on select Makita tools.
#DML808. High-luminance single L.E.D. flashlight provides a full 200 lumens of light and a sharp, round spotlight.12 position pivoting flashlight head with positive stops from 60º - 110º.
18V LXT® Lithium-Ion Cordless L.E.D. Lantern /Flashlight, Bare
Was $219.00 NOW
pair
18V LXT® Lithium-Ion Cordless Adjustable Beam Flashlight Bare
#DML815. Delivers bright illumination, versatility, and convenience. High-luminance single L.E.D. flashlight provides a full 160 lumens of light and a sharp, round spotlight.
$
Professional Contractors, Craftsmen, and Homeowners will find our top tool manufacturers showing their newest and most innovative products.
Was $74.99 NOW
5499
18V LXT® Lithium-Ion Cordless Flashlight Bare
Was $94.00 NOW
17
50
#T-04276(M), #T04282(L), #T-04298(XL) ANSI rated at abrasion Level 3 and ANSI/ISEA impact-rated Level 2 giving them high abrasion resistance and added protection against impact.
#T-04210(M), #T-04226(L), #T-04232(XL) Durahide Leather™ technology provides a breathable glove, ready to wear with no break-in time. Ideal for general-purpose work, construction, woodworking, carpentry, and DIY home improvement.
$
SATURDAY November 18th 8AM - 2 PM
#T-04248(M), #T-04254(L), #T-04260(XL) Engineered for high-impact work including demolition and are constructed of up to 20% more thermoplastic rubber (TPR) for increased impact protection.
Was $28.99 NOW
Was $67.00 NOW
& EXPO
Was $31.49 NOW
Was $16.99
LUMBER AND BUILDING
MATERIALS SINCE 1912
Hearn Ave. & Dowd Dr. H Santa Rosa H 707-576-3333 H www.meadclark.com H Monday thru Saturday 7 AM to 5 PM Visa, Discover, Mastercard & American Express Welcomed H All items FOB yard and store - limited to stock on hand H Prices may vary after November 30, 2023 We reserve the right to correct printed errors H Photographs represent merchandise offered, but may not be exactly as shown H ad design ©2023 AdverGraphics