Valor Gas Fireplaces

w w w. v a l o r f i re p l a c e s . c o m

H4 SERIES

Contemporar y, Radiant Gas Fireplaces

THE VALOR H4 Integrating contemporary design with efficient Valor heat, the H4 is one of our most versatile fireplaces to date. Choose from two different backing plates (landscape or square) and one of three designer bezel window trims in copper, nickel or black.

VALORSTAT PLUS REMOTE CONTROL (STANDARD FEATURE) The ValorStat Plus Remote Control gives you the power to select, adjust and program the desired temperature that you want. Timer and Thermostat modes help save energy and lower your overall home heating costs.

Pilot On Demand: The ValorStat Plus also has the ability to turn your pilot light ON and OFF from the handheld remote for years of additional energy savings.

Spread the Warmth

WITH Efficient heat distribution

The source of Valor comfort - radiant heat - has been around since the beginning of time.

Like heat from the sun, our fireplaces are specifically designed to maximize radiant heat output.

By heating with a Valor, you effectively warm the most frequented space in your home. This concept is called zone heating, a proven method for cutting home fuel consumption.

Turn down your furnace and save in comfort.

VALOR WALL SWITCH KIT

STANDARD FEATURE (Installation Optional) Light the pilot, then simply adjust the flame to your desired comfort level all from one standard size switch. Fireplace control has never been so easy!

The wall switch works in conjunction with the ValorStat Plus handheld remote.

NO POWER, NO PROBLEM Valor H4 shown with 662SSV Outer Square Surround (Vintage Iron) & 661BSC Inner Bezel Surround - Copper with 621VRL Valor Red Brick & Log Set

In the winter time a power failure can chill your home fast. Valor Radiant Gas Fireplaces are fully functional heaters that don’t require electricity (AC) for steady, efficient operation.

Our fireplaces provide the perfect mixture of radiant and convective heat eliminating the need for a noisy, inefficient fan.

To learn more please visit www.valorfireplaces.com.

Valor H4 650IR shown with 662SSV Outer Square Surround (Vintage Iron) & 661BSC Inner Bezel Surround w w w. va l o r f i re p l a c e s . c o m

1.

4.

2.

5.

3.

Valor H4 shown with 660LSV Outer Landscape Surround (Vintage Iron) & 661BSP Inner Bezel Surround - Brushed Nickel with 620FBL Black Fluted Liner & 761DRK Decorative Rock Kit Accessory

Shown with 761DRK Decorative Rock Kit Accessory

6.

1. 660LSV Outer Landscape Surround (Vintage Iron) & 661BSN Inner Bezel Surround - Nickel Powder Coat with 620FBL Black Fluted Liner & Creekside Fuel Bed

4. 662SSV Outer Square Surround (Vintage Iron) & 661BSC Inner Bezel Surround - Copper with 622LSL Ledgestone Liner & Log Set

2. 660LSV Outer Landscape Surround (Vintage Iron) & 661BSB Inner Bezel Surround - Black with 618EBL Enamel Black Liner & Log Set

5. 662SSV Outer Square Surround (Vintage Iron) & 661BSP Inner Bezel Surround - Brushed Nickel with 620FBL Black Fluted Liner & Creekside Fuel Bed

3. 660LSV Outer Landscape Surround (Vintage Iron) & 661BSC Inner Bezel Surround - Copper with 620FBL Black Fluted Liner & Creekside Fuel Bed

6. 662SSV Outer Square Surround (Vintage Iron) & 661BSB Inner Bezel Surround - Black with 621VRL Valor Red Liner & Log Set

Manufactured by:

Bottom of appliance

Min. 1/2” (13 mm) air gap Miles between surface of finished hearth or floor and the Industries bottom of appliance Ltd.

1

661BSN

NOTE: Appliance requires a MINIMUM of 1/2” (13 mm) space Please Note: When building NOTE: Appliance requires a MINIMUM of 1/2” (13 mm) to floor/hearth in front for air flow.

Raisespace the appliance accordingly. to floor/hearth in front for air flow. Raise the appliance accordingly. your H4, you must select one Outer Surround as well as one Inner Bezel Surround.

Inner Bezel Surround - Nickel Powder Coat

New Look. New Technology.

Miles of Experience.

Hearth

All product information is accurate at time of printing and is subject to change. Please Note: Printed images may vary from actual product. To guarantee you have selected the correct product for your home, visit your local Valor dealer. There you will find live burning units that perfectly match the fireplace you have in mind.

16” (406 mm)

pay-off Inneris Bezelsuperior Surround - Brushed Nickel

room comfort, 551DVK Directlower Vent Kitoper- sidewall vent terminal ating costsCo-linear and a Adapter fireside 556CLA - converts co-axial vent to 2 x 3” vent liners (insert) ambiance 559CLT

that is timeless.

Co-linear Terminal - chimney liner termination cap (for use with 556CLA) LP to Natural Gas Conversion Kit

755CFK

Circulating Fan Kit - variable speed, thermally activated

761DRK

Optional Decorative Rock Kit Accessory

817VAK

Vent Adapter Kit - Simpson DuraVent

835TG

Terminal Guard for 551DVK (required item in certain app. see install manual)

Fuel Max. Input Min. Input w w w. m ilesfireplaces.com BTU/hr

BTU/hr

650ILN(Log) / IRN (Rock)

NG

24,000

6,500

650ILP(Log) / IRP (Rock)

LPG

24,000

13,000

AFUE++

Stand-off

36” (914 mm)

38-3/4” (984 mm) to underside of min. header and cavity height

Stand-off

Mantel

Stand-off

Max. Output** (w/out fan) BTU/hr

30-3/4” (768 mm) to wall finish

Combustible framing allowed beneath fireplace.

When the appliance is

610FVI DoubleDoor FenderFire installed directly on Front or other with 614CVI carpeting, Arched tile Cast Surround combustible material other than wood flooring, the appliance shall be installed on a metal or wood panel extending the full width and recessed depth of the appliance

A70.9%Va l o r70.6%G a s 17,506 Fireplace Collection 70.9%

70.6%

26-3/4” (679 mm)

MINIMUM 3/4” (19 mm) from finished wall surface to front of appliance

32-3/16” (817 mm)Wall Finish Combustible

EnerGuide Rating**

38-5/8” (981 mm) 23-1/8” (587 mm) to rear vent center

9” (229 mm) From finished wall surface to top vent

...a fireplace worth coming home to.

Miles

16” (406 mm)

3” (76 mm) min.

To side wall from inner frame in front of the appliance

607NGK

by MODEL/FUEL

16” (406 mm)

26-3/4” (679 mm)

is Valor powered by a Red Liner direct-vent Ledgestone engineLinerwith 622LSL advanced features incorpo660LSV Outer Landscape Surround (31-5/8”h X 44-3/4”w) rating decades of experi662SSV Outer Square Surround (31-3/16”h X 36-3/4”w) ence as innovators within - Black 661BSB Inner Bezel Surround the industry.

661BSC Inner Bezel Surround - Copper

23-1/8” (587 mm) to rear vent center

fronts 621VRL

Stand-off

Stand-off

29-3/4” (756 mm)

LINERS SURROUNDS

exquisitely Black designed fire 620FBL Fluted Liner

P l e a s e r e f e r to t h e c o m p l e t e H 4 ( 6 5 0 I ) p ro d u c t m a n ua l b e f o r e i n s ta l l at i o n

Model

Mantel

Mantel

17,506

A b o u t O u r E fficienc y R at ings - All Valor product literature is published using recognized Canadian and US government test methods for determining energy efficiency performance. This ensures our products will perform in your home as rated. Beware of misleading “steady state” efficiency claims made by manufacturers using their own “in-house” test methods. Examples include alterations to venting and installation restrictions that produce false ratings. Visit valorfireplaces.com for more information.

” 33

m)

MINIMUM 1/2” (13 mm) space between bottom of appliance and surface of hearth or floor finish

8m

(83

NOTE: Appliance requires a MINIMUM of 1/2” (13 mm) space to floor/hearth in front for air flow. Raise the appliance accordingly.

16” (406 mm) min. straight out

16” (406 mm)

or off the top venting.

Allow for elbow if rear vent with rise.

FRAMING DIMENSIONS

Designed and manufactured by/for:

Copyright Miles Industries Ltd. 2010 Proudly Made in North America Printed on recycled paper

23-1/8” (587 mm) to rear vent center

FRAMING DETAIL

Every one ofEnamel our unique and(Reflective) 618EBL Black Liner

The 661BSP

36” (914 mm) min.

36” (914 mm) min.

Direct Vent H4 Engine LPG (Creekside Rock Set )

29-3/4” (756 mm)

The maximum vertical vent run on a Valor H4 can not exceed 40 feet in total length.

The H4 can be both top and rear vented.

OPTIONAL KITS

SIDE WALL TERMINATION

Printed in Canada 04/05

ROOF TERMINATION

POSSIBLE VENTING OPTIONS

Co-Axial

(New Chimney)

650IRP

At the end of the day...

30-3/4” (781 mm)

(Existing Chimney)

32-3/16” (817 mm) 32-3/16” (817 mm) Stand-off Stand-off

FRAMING DIMENSIONS 30-3/4” (781 mm)

Co-Linear

appliance

PRODUCT DIMENSIONS

30-3/4” (781 mm)

ENGINES

Vintage Iron Finish

appliance 3” (76 mm) min.

3” (76 mm) min.

To side wall from To side wall from inner frame in front inner frame inof front the appliance of the appliance

29-3/4” (756 mm)

VENTING OPTIONS

ote: Diagrams for e only. For further on details, call your r or visit our website lesfireplaces.com.

Outlet Vent

new home or remodeling an older one, an energy efficiFIREPLACE ant Valor COMPONENTS Gas Fireplace is a wise investment that will NG (Log Set) 650ILN Direct Vent H4 Engine pay dividends to LPG (Log Set ) 650ILP Directfor Ventyears H4 Engine follow.

650IRN Direct Vent H4 Engine NG (Creekside Rock Set)