PLITUKPERFG - JAN 2017
*Offer available whilst stocks last. Offer applies to selected products as indicated within this flyer. **Spend values refer to purchases of individual products and do not apply to total values when multiple products are purchased.
ê BUY ANY OF THESE PRODUCTS & GET A FREE PERFORMANCE GARAGE RE-PEELABLE STICKER!* Small Brake Caliper Press • Ratcheting mechanism allows for fast and easy retraction of single and multiple piston calipers • Acme threaded rod spreads pads quickly with less ratchet swings • Offset press plates allow tool to retract to a minimum 0.328" • Compact design is great for vehicles with small calipers, as well as compact vehicles and motorcycles
i
APPLICATIONS INCLUDE: • • • • • • • • • • •
Fiat 500 / Abarth Ford Fiesta BMW 3 Series Audi, Porsche, VW rear calipers Mitsubishi - Eclipse, Evolution, Lancer Toyota - Scion, Celica, Yaris Honda CBR/CR model motorcycles Harley-Davidson motorcycles Yamaha, Kawasaki, Suzuki, Triumph motorcycles BMW motorcycles Will also work on most vehicles with standard non-wind back brake pistons
Only
£54.45 VAT
Excl.
BTCP400
3-PC Heavy Duty Radiator Pick Set
4-PC Seal Removal Set
• Extra long bend on working tip provides leverage to easily handle heavy duty jobs
• Rounded tips with blended radius edge allow for easy removal of seals or O-rings
• Quickly removes radiator hoses from clamps and cotter pins • Can also be used for alignment of hard-to-reach clips and small spring installations
APPLICATIONS INCLUDE:
• Soft grip Instinct handles for extra comfort and a sure grip
• Transmissions
®
i
• Heater and vacuum hoses • Oil pump drive shaft seals • Injectors • Fuel rail O-rings • Inner tie rod rack boot and CV boot removal • Steering racks and pumps • Fork seals and caliper dust boot assemblies (on motorcycles)
Was £64.95 Excl. VAT
£40.95 VAT
Excl.
SGRHTLB3BR
Only
£37.85 VAT
Excl.
SGSR104AR/G/O
*Offer available whilst stocks last. Offer applies to selected products as indicated within this flyer. Terms apply, see cover page for details.
AVAILABLE IN RED, GREEN & ORANGE
ê GET A FREE BEANIE HAT, T-SHIRT OR CLOCK -
GET 1 PEEL FROM MY PRIZE BOARD TO CLAIM YOUR PRIZE! WHEN YOU BUY ANY OF THE PRODUCTS ON THIS PAGE*
T-HANDLE WRENCH SETS: • ALLOW FOR MAXIMUM PRESSURE TO BE APPLIED WITH BOTH 'T' AND 'L' SHAPED APPLICATIONS • LONG BLADE FOR QUICK FASTENER TURNING IN HARD TO REACH AREAS • SHORT BLADE FOR MAXIMUM TORQUE IN CLOSE QUARTERS • ERGONOMIC SOFT GRIP HANDLES FOR COMFORT AND GREATER TURNING POWER
BALL HEX
8-PC Soft Grip T-Handle Ball Hex Wrench Set • Contains sizes 2, 2.5, 3, 4, 5, 6, 8 and 10mm • Short blade for maximum torque in close quarters • Long blade with ball hex end for greater reach and accessibility
Only
£101.00 VAT
Excl.
AWBSGM800
HEX HEAD
8-PC Soft Grip T-Handle Hex Key Wrench Set • Contains sizes 2, 2.5, 3, 4, 5, 6, 8 and 10mm • Blades are heat treated and chrome plated for durability • Tips are black oxide coated for secure fastener engagement
Only
£79.40 VAT
Excl.
AWSGM800
TORX® HEAD
8-PC Soft Grip Torx® T-Handle Wrench Set • Contains sizes T10, T15, T20, T25, T27, T30, T40 and T45 • Blades are heat treated and chrome plated for durability
Only
• Tips are black oxide coated for secure fastener engagement
AWSGT800
*Offer available whilst stocks last. Offer applies to selected products as indicated within this flyer. Terms apply, see cover page for details.
£79.40 VAT
Excl.
ê GET A FREE BEANIE HAT, T-SHIRT OR CLOCK - GET 1 PEEL FROM MY
WHEN YOU BUY ANY OF THE PRODUCTS ON THESE PAGES*
BOTH OF THESE SOCKET SETS FEATURE: Socket drives fasteners on the flats, therefore providing up to 15-20% more turning power and less chance of rounding 11-PC 1/4" Shallow Metric Socket Set
i
• Set includes: 5.5–15mm
APPLICATIONS INCLUDE:
• Detent retaining system uses grooves on interior walls to ensure secure drive engagement
• VW Golf sump requires the 10mm socket • Great for tight places i.e. inlet manifolds
• Manufactured from special alloy steel and heat treated for optimum strength and durability
Was £366.75 Excl. VAT
£183.00 VAT
Excl.
111TMUSMA
24-PC 3/8" Deep and Shallow Socket Set • Set contains 8 – 19mm 6pt shallow and deep sockets for comprehensive coverage • Made from special alloy steel for a stronger, more durable socket • Thin wall design provides greater access and improved performance where you need it most • Broach depth that allows nut rethreading without removing it from the socket Was £304.60 Excl. VAT
£192.60 VAT
Excl.
224SFFSM
SAVE OVER £110
12.9cm
i
GREAT FOR GAINING ACCESS TO RESTRICTED AREAS
6-PC 3/8" Metric Long Ball Hex Socket Set • Set contains sizes: 4 – 8mm and 10mm • Cold formed retaining sockets resist cracking even under heavy load • Friction held hex bits for quick and easy bit replacement when requiredd
20°
Was £152.75 Excl. VAT
£119.99 VAT
Excl.
206EFABLM
*Offer available whilst stocks last. Offer applies to selected products as indicated within this flyer. Terms apply, see cover page for details.
Y PRIZE BOARD TO CLAIM YOUR PRIZE! 24V Heavy Duty Circuit Tester • Heavy duty battery post clamp opens wide and grips tight • Used to detect DC voltage, power, ground and circuit integrity • LCD display provides ‘no guess’ voltage value of the circuit • Backlit LED glows red for power and green for ground • Computer safe (not for use on airbags)
Only
£94.05 VAT
Excl.
EECT424HD
NOW WITH HEAVY DUTY & DURABLE CLAMP
7-PC 3/8" & 1/2" Shallow Impact Torx® Socket Set • Contains sizes 3/8" E8 – E18 and 1/2" E20 • Impact sockets are heat treated to a lower hardness level to increase impact resistance • Specially designed to absorb repeated impact cycling
Supplied in a magnetic socket tray
i
APPLICATIONS INCLUDE: • Various applications on heavy duty commercial vehicles with Mercedes-Benz engines • E20 for rear brake caliper bolts on BMW X5
Only
£83.60 VAT
Excl.
207IMFLE
Rechargeable COB Work Light • Ergonomic grip handle and bumper for impact protection • 360° rotating hook • Light output: 300 lumen on high, 160 lumen on low • Run time: 3 hours on high, 6 hours on low
INCLUDES FREE MAGNETIC COLLAR (ECFBAR3UKMAG)
Only
£77.75 VAT
Excl.
ECFBAR3UKR/G/O
AVAILABLE IN RED, GREEN & ORANGE
ê GET A FREE BEANIE HAT, T-SHIRT OR CLOCK -
GET 1 PEEL FROM MY PRIZE BOARD TO CLAIM YOUR PRIZE! WHEN YOU BUY ANY OF THE PRODUCTS ON THIS PAGE*
24" Multiposition Pry Bar • Manufactured from special alloy steel for optimum strength and durability
24" LONG
• High leverage design with smooth radius head provides maximum leverage • Adjustable fulcrum with 17 incremental angles of 15° to provide ultimate flexibility
17 WORKING ANGLES FOR
i
GREAT FLEXIBILITY!
Only
£138.10 VAT
Excl.
PBMP24A
3/8" Compact Flex Head Ratchet
WHY CHOOSE THIS Ratchet? • 72 TOOTH GEAR FOR SMOOTH RATCHETING Only
• 15% LESS RATCHETING ARC TO ENGAGE THE NEXT TOOTH
£77.65 VAT
Excl.
• DUAL PAWLS MEAN 6 TEETH ARE IN CONTACT WITH THE GEAR FOR STRENGTH & DURABILITY
FCF72
8-PC Long Soft Grip Instinct Screwdriver Set • Long ‘cabinet’ style blades are the same width as the tip, giving optimum accessibility Contains sizes: • Flat tip 0.030" (10"), 0.032" (12", 16", 20") • Phillips® #1 (10"), #2 (13", 17", 21")
AVAILABLE IN RED, GREEN & ORANGE Instinct handles are designed by technicians to suit the way you naturally hold a screwdriver giving extra torque and more comfort. They have been designed to give greater POWER, SPEED & FINESSE.
*Offer available whilst stocks last. Offer applies to selected products as indicated within this flyer. Terms apply, see cover page for details.
Was £167.60 Excl. VAT
£144.60 VAT
Excl.
SGDXL80BR/O/G
ê GET A FREE BEANIE HAT, T-SHIRT OR CLOCK! WHEN YOU BUY ANY OF THE PRODUCTS ON THIS PAGE*
NE W
!
SNAP-ON RATCHETING WRENCHES:
• Features new low profile and thin wall design for optimum access in the most restricted areas • Patented, ratcheting gear-design delivers up to 95% more cycle life, while delivering equal strength of traditional box end wrenches • 0° offset gives more power in less space and removes stubborn fasteners in tight areas • 80 tooth ratcheting gear, minimises swing arc in tight spaces • Flank Drive® wrenching system on box end provides up to 15-20% more turning power with less risk of tool or fastener damage • Made from special alloy steel, precision forged and heat treated for optimum strength and durability • Nickel chrome plating helps protect against corrosion and makes it easy to clean
ê GET 1 PEEL FROM MY PRIZE BOARD TO CLAIM YOUR PRIZE! ê WHEN YOU BUY THIS 3-PC WRENCH SET
3-PC Combination Ratcheting Wrench Set BOTH SETS FEATURE
LOW PROFILE & THIN WALLS FOR OPTIMUM ACCESS!
• Contains sizes 21, 22 and 24mm Only
£198.35 VAT
Excl.
OXRM703
ê GET 2 PEELS FROM MY PRIZE BOARD TO CLAIM YOUR PRIZES! ê WHEN YOU BUY THIS 10-PC WRENCH SET
10-PC Combination Ratcheting Wrench Set • Contains sizes 10-19mm
ASK ME FOR A DEMO!
TRADE-IN AVAILABLE! *Offer available whilst stocks last. Offer applies to selected products as indicated within this flyer. Terms apply, see cover page for details.
Only
£350.85 VAT
Excl.
OXRM710-20
ê GET A FREE BEANIE HAT, T-SHIRT OR CLOCK -
GET 2 PEELS FROM MY PRIZE BOARD TO CLAIM YOUR PRIZES! WHEN YOU BUY ANY OF THE PRODUCTS ON THIS PAGE*
18V 1/2" Lithium Cordless Impact Wrench with 1 Battery • High capacity 18V 4 Amp hour lithium battery allows you to work longer • Built-in brake prevents tool from throwing sockets and fasteners • Battery fuel gauge indicates status of battery charge • Cold formed alloy steel anvil for maximum durability • Robust high impact glass filled nylon housing • Thermal temperature controlled motor prolongs tool life • Includes 1 x 18V 4.0 Ah lithium battery, 1 x battery boot and 1 x body boot
INTEGRATED LED LIGHT ALLOWS FOR EXCELLENT VISIBILITY IN DARK WORKING AREAS UP TO
700 FT LBS OF BOLT BREAKAWAY TORQUE!
SPECIFICATION Tightening Torque (ft lbs)
Up to 600
Blows Per Minute
2,280
Free Speed RPM
1,900
Only
£403.70 VAT
Excl.
CTEU8850AWB
CTCEU123
ALSO OWN ANY 14.4V MICRO-LITHIUM TOOLS? ASK ME ABOUT THE MULTI-BAY CHARGER TO CHARGE YOUR 14.4V AND 18V BATTERIES! 18V Lithium Cordless Grease Gun with 1 Battery • Machined and hardened piston with plated steel barrel and premium grease follower • 2 speed, hi-torque 18V DC motor delivers outstanding flow and pressure • Ergonomically designed to reduce fatigue and increase productivity • 36" high pressure hose with spring guard and coupler • Accessible check valve and combination air bleeder/filler valve • Dual motor protection includes self-resetting thermocouple • 18V high amperage lithium-ion battery provides outstanding run time • Works well in cold environments • Includes 1 x 18V 4.0 Ah lithium battery Only
£358.50 VAT
Excl.
CGGEU8850WB-40
*Offer available whilst stocks last. Offer applies to selected products as indicated within this flyer. Offer does not apply to CTCEU123. Terms apply, see cover page for details.
ASK ME FOR A TRADE!
ê LIMITED EDITION PERFORMANCE GARAGE KIT! ALL PRODUCTS FEATURE
Limited Edition
SNAP-ON PERFORMANCE GARAGE DESIGN!
ASK ME FOR MY DEAL ON THESE FANTASTIC PRODUCTS! BEST Performance Garage Trapper Hat
Performance Garage Seat Cover
CHKTRAP7456
ITCSCPK12PG
• Faux fur lining/trim
• Universal fit
• Quilted lining for ultimate warmth
• Airbag safe
• Wind and water resistant
Performance Garage Wing Cover - Pack of 2 ITCWWCPK2-PG
• Minimises risk of damaging paintwork on customers vehicles when working around engine bays • Weighted bag holds cover in place - even on carbon fibre • Premium padded nylon construction • Oil, water and grease resistant
Performance Garage Mechanic’s Mat POLYMMPK5PG
• Unique Snap-on ‘S’ handle • Durable and comfortable foam material
• Water resistant and machine washable • 4oz premium weight
All prices in this flyer exclude VAT at 20%. Items are available from participating Snap-on Franchisees for a limited time while stocks last. Price, availability and specifications may change without notice. Actual colour may not be accurate due to print process. Errors and omissions excepted. Snap-on® and Blue-Point® are registered trademarks of Snap-on Inc. Other trademarks are the property of their respective registered proprietors. © Snap-on UK Holdings Ltd 2016