Building solutions 805 by SolutionsUk

0121 274 0136 • www.solutions4industry.co.uk

Inside this issue

Issue 805 • August 2015

GreenUrban Technologies GreenUrban Technologies is a UK Engineering company offering a straight forward and costefficient approach to solutions that make a difference to the welfare and safety of workers and members of the public.

warranty on all GreenUrban systems, a full inspection and filter cleaning service and replacement and upgrade filters to fit most makes and types of device. September 2015 will also see the introduction of the GLA Safer Lorry Scheme aimed at protecting vulnerable road users (VRU’s) including cyclists, motor cyclists and pedestrians.

Whether it is in the area of emission reduction, cycle and pedestrian safety or the provision of high quality public access defibrillator housings GreenUrban offers cutting edge design and the latest technologies across all sectors and to all sizes of organisation.

Access Platform Lifts

Lifts & Access News See them on page...................V

Smart Carts UK

Building News See them on page................. VI

Clement Conservation

Doors & Windows News See them on page...............VIII

MPW Insurance Brokers Building News See them on page................. XI

We have been at the forefront of the emission reduction industry since 2008, producing both niche OEM and retro-fit exhaust systems for all types of diesel engine powered equipment including trucks, buses, light commercial vehicles, power generators and mobile site equipment, allowing operators to achieve compliance with legislated emission levels across all sectors. From September 2015, the new GLA Non Road Mobile Machinery regulations come into force, imposing mandatory emission standards for on Site equipment throughout Greater London. GreenUrban’s ecotrap, ecotrap+, ecoNOx and ecoNOxt products are designed and adapted

GreenUrban Technologies at Stand F26

to achieve compliance with these regulations, offering solutions to achieve levels of emissions from Stage 111a (for particulate matter) through 111b/1Vi (for particulate and Nox) to Stage 1Vfinal (for particulate and Nox). GreenUrban offers free impartial advice on emission reduction solutions and is happy to combine design, supply and integration with the highest level of direct ongoing support for complete peace of mind. Included in this is a comprehensive 2 year

These regulations, which will be enforceable in law and carry large fines for non-compliance, compel owners of vehicles over 3.5 tonnes to fit side guard rails (to lessen the chance of fatal collision with VRU’s) and improved mirror systems to allow drivers a more comprehensive view around the vicinity of their vehicle. GreenUrban’s cyclesafe range is cost-effective, easily installed, offers a wide choice of high tech upgrades and is fully compliant with GLA regulation, TfL requirement and CLOCS guidelines. To find out more about who we are and what we do, visit: www.greenurban.co.uk, get in touch via telephone: +44 (0)1768 480111, +44 (0)1768 480750 or email: info@greenurban.co.uk.

Propeller Studios’ Construction Software Solutions go from strength to strength Propeller Studios are in the middle of launching some fantastic new functionality to their already feature-packed construction sector software solution, EasyBOP. The web-based business management solution is designed for SMEs in the construction sector and related services that need to bring order and efficiency to their work processes and the new features allow even more areas of the business to benefit. The brand new E-tendering module allows EasyBOP clients to improve their supply chain management by running their own tendering process, while the planned works functionality has been improved to include Quantity Surveyor functionality, the addition of BOQ lists, valuations, bulk pricing, variations and cost to value reports. There have also been recent updates to the drawing register and the inventory module, where you can perform stock control between stores. In EasyBOP, Propeller has in effect created multiple standalone pieces of software, within the one solution, that all talk seamlessly to each

www.facebook.com/solutionsuknews

people and plant. Everything is indexed by the software and searchable from the one login. As a web-based platform, EasyBOP is available from tablet devices with access to the internet, which gives the ability for staff to update the system while they are out on a job; allowing stock control and reporting to be done on the fly, reducing the need for paperwork to be filed when staff return to the office.

Propellor Studios at Stand E12

other and share data across a single platform. The affordable solution has all the components necessary to run a business efficiently, encompassing Business Reporting, CRM, Invoicing, HR, Supplier Management and much more. And by sharing data across the different areas, duplication of entry is removed saving companies both time and money. The reporting functions allow companies to track their jobs, check POs and invoice details, who is working on a job, the forms completed or any other associated document. There is the functionality to manage projects, suppliers,

and follow us on Twitter

This makes EasyBOP particularly relevant for companies who deal with planned works and responsive repairs, or any other service where information needs to be collected over a large number of different locations. “We used to work on 6 different systems, which meant that if information was needed in more than one place it had to be duplicated. With EasyBOP we only use one system; everything can be linked together, is easy to find from one place and has saved us so much time.” Concrete Repairs Ltd For more information on EasyBOP, visit: www.easybop.co.uk or call Jason Darby on: +44 (0)1462 440077.

@S4I_UK

Paving & External Works News

Stone Federation GB The unincorporated association Stone Federation GB is a renowned national trade body for the natural stone industry. It effectively coordinates every aspect of the sector, providing specifiers and users with a single port-of-call for information, expertise and guidance in sourcing an appropriate material and a reliable service. Stone Federation GB works strategically to represent employers, support its member companies and assist its clients wherever possible whilst simultaneously promoting best practice and setting stringent industry standards. It aims to promote the interests of those within construction; reinforcing the correct use and maintenance of natural stone to those who may utilise it. The association also strives to support the use of natural stone

Global Stone (GS)

as a building material in favour of other building materials in a bid to increase the market share of natural stone for its esteemed members. This subsequently leads to the promotion and maintenance of the traditional skills involved in natural stone. To guarantee success, choose Stone Federation GB and its members for all of your natural stone enquiries – you can rest assured that you will receive the best quality advice and knowledge in regards to legal affairs, health and safety, technical standards, craftsmanship, training and education. T +44 (0)1303 856123 enquiries@stonefed.org.uk www.stonefed.org.uk

Global Stone (GS) is an industry leading supplier of premium natural stone and porcelain paving tiles. Our paving is selected by hand to ensure that it is always of the highest quality and is used by architects, landscapers, gardeners, designers and homeowners across the country, regularly featuring in medal winning show gardens. Our product range has grown from a simple collection of natural paving options to include the latest in contemporary porcelain paving solutions. The trends for garden design for 2016 continue to move towards contemporary designs, increased hard landscaping and using the outdoor space as an extension of the home. A number of products within our current collection are perfect for these trends, including the Artisan Collection, specifically

our Mirage and Serenity products, which offer versatile honed sandstone with a delightfully smooth finish ideal for indoor and outdoor use. For more information on our full range visit: www.globalstonepaving.co.uk/ products or call: +44 (0)845 606 0240 (Lo-Call Rate).

Landscaping and tree surgery With a team of professional, fully trained and qualified tree surgeons and landscapers, Dolwin & Gray offer a range of tree servicing including Pruning, cleaning, reduction & Reshaping, crown lifting, sectional dismantling of trees both large and small and the grinding of stumps. Servicing London and the South East, the company is a well-established business with over 44 years of experience.

Our BioPure Range of Sewage Treatment Plant

Dolwin & Gray was first set up as a Forestry company by Mr John Dolwin and Mr Don Gray back in 1969. Today it has progressed to being a highly successful Landscaping & Tree Surgery business and is owned and run by partners Colin Goss and Frin Noakes. Both domestic and commercial work is undertaken by the company and they also offer Tree reports & surveys to BS5837:2012 Trees in relation to design, demolition and construction recommendations. The team can assist with applications for work to be carried out under Tree Preservation Orders and conservation areas with the Local

Dolwin

Authorities. They also carry public Liability Insurance of 10 million for your peace of mind. For more information or for a free estimate, contact: +44 (0)1892 853232 or email: enquiries@dolwinandgray.co.uk or visit: www.dolwinandgray.co.uk

Gray

Established 1969

^^ Manufactured in the UK ^^ Suitable for homes without access to mains drainage ^^ Discreet solution to on-site sewage treatment ^^ 10 models in the range with a capacity up to 50pe ^^ CE Marked and EN 12566-3 Certified ^^ Uses the extended aeration method to treat sewage ^^ 96% efficiency allows a typical 3-5 year emptying interval ^^ Visually unobtrusive and odourless ^^ 25 year warranty on GRP & 2 year warranty on the air pump ^^ Deal direct with the Manufacturer

Hedge, Copse & Woodland planting (Transplants to semi-mature) Cultivation & Seeding Paddocks etc Turfing

^^ Flowpath commercial range for 60-300 persons

All aspects of Tree Work, Surveys and Reports to BS5837:2012 Trees in Relation to Design, demolition and construction – Recommendations

Tel: 01892 853232 • Fax: 01892 853434 Email: enquiries@dolwinandgray.co.uk www.dolwinandgray.co.uk

Please call 01746 781782 or visit www.webuildit-ltd.co.uk or www.bio-pure.com is sponsored by Access Platform Lifts | please turn to page V

Commitment to Excellence

Save Energy & Money with Easytherm Solutions UK is pleased to present its highly esteemed Commitment to Excellence profile to Easytherm Ltd. As a relatively new company, Easytherm was founded three years ago by founder and technical director Steve Lord. He decided to set up his own enterprise in a bid to step off the corporate merry-go-round (after working in the hardware and software development industry for numerous years) to follow his professional interests more closely. Easytherm is a manufacturer and retailer of ‘smart’ heating and hot water controllers, which are effectively an environmental and cost-effective alternative to more traditional methods and systems. Dubbed Easytherm®, this intelligent networked boiler programmer is a revolutionary new concept which enables customers to save significant amounts of time, energy and money. The system can be specifically configured per clients’ requests during the initial set up, and settings can be tweaked accordingly depending on individual preferences in terms of both temperatures and timings. It ensures fantastic savings can be made on both heating and hot water costs and it can easily be considered the best value programmer available on the market. “Our main role is to design, produce

and distribute home control products,” explained Easytherm’s Managing Director Paul Burke. “We have started our journey with a heating and hot water controller that can be controlled either from the base unit or remotely from any internet connected device. Our product road map takes in remote sensors for temperature, remote TRVs, alarm systems (gas, heat, fire, motion) and a central system to manage and control.

but future plans involve penetrating the new build and care and independent living markets. Easytherm’s headquarters is situated in Milton Keynes but its design and development processes take place in the UK and Vietnam and its production and manufacturing facilities are based in Romania. Whilst discussing the company’s progressive path, Paul concluded: “After our recent launch we are simply developing our strategy to increase our awareness in the market and pursue our chosen channels. Our goal is to develop our product line up and really bring a ‘home care and protection’ management system to the domestic user.

“We put the user at the heart of everything we do and we aim to put the user in control of their domestic environment – be that heating and hot water, that is caring for the home environment or protecting the home environment through adequate measures (smoke alarms, CO2 alarms and motion sensor alarms are just some of the products that we aim to bring to market). “With Easytherm, it’s all about simplicity. Our ‘Keep it Simple’ approach runs from the easy set up (one box which fits standard 6 pin BG backplate fond on almost all existing controllers) to the easy configuration. All you have to do is connect to the local internet which is simply done using a phone or a tablet, then it is fully operable from the minute you install, as all functionality can be managed from the unit itself through to very simple app download making all functions operable anytime, anyplace and anywhere from your internet connected device.”

Easytherm’s most recent product is the ETLite, the world’s first upgradable controller. It begins as a simple to use heating and hot water controller and can then be upgraded to an internet based remote controlled heating and hot water controller. Typically, installers utilise these systems the most, but links are being developed with larger institutions in order to install in greater numbers within larger development projects. Naturally, the business is predominantly placed in the heating and plumbing sector,

“We have attended many trade shows, however, as researchers rather than presenters. Our intention is to totally understand our market, what's there and more importantly what's not – we see ourselves as adding value to the already exciting market that is the internet-based control systems market. Our key aim is to make this easy to install and simple to manage whilst making it totally affordable – we want to be the system of choice.” Contact T +44 (0)1865 522583 info@easytherm.co.uk www.easytherm.co.uk

Hardware for Windows and Doors – We’ve got it! Solutions UK is proud to present Window Ware and commend its team for achieving its highly regarded Commitment to Excellence profile.

door cylinders. The third selection of items is the installation products, which include silicones, glass cleaners and glazing packers as well as guttering, fascias and soffits.

Founded in 1987, Window Ware is renowned for being a principal UK distributor of hardware components and ancillary items predominantly to the window, door, and conservatory markets. It has been duly recognised for its ability to advise customers on the most appropriate hardware required for their individual applications.

The business boasts an all-reaching range of components, comprising 5,000 different parts which are readily available in stock for rapid purchase; the hardware can be ordered by phone or online via its nationwide next-day delivery service. The selection includes some of the most superior brands in the sector as well as individual items made exclusively for Window Ware, and its frequently updated profile listings ensures the widest choice of hardware can be supplied.

“We are largely a business-tobusiness association supplying to window and door fabricators & repairers, locksmiths and general

industry tradesmen,” explained Sarah Binns, Marketing Services Manager at Window Ware. “We also serve customer groups such as builders, plumbers, roofers and architects.” Window Ware’s range of products is incredibly extensive and can be split into three broad categories. The first, the Window hardware, consists of window espagnolette handles, window friction hinges and window shootbolt systems, whilst the second, the door hardware, comprises door locks, door handles and

“We are a stockist of leading brands that majors on achieving complete client satisfaction,” Sarah continued. “Customer service is at the heart of everything we do and we pride ourselves on the provision of quality, reasonably-priced products which reach our customers the very next day.” When discussing Window Ware’s latest movements and future plans, Sarah concluded, “As a company we are ever-evolving. We recently unveiled our rebranding with a new-

“We are aware that domestic homes are becoming smarter in this modern age, so we aim to follow suit by creating products which will best suit our target market. We are also looking forward to attending our first ever exhibition; the Build Show at the NEC this October.” For all of your associated queries, get in touch with Window Ware today. Whether you are after a product replacement or are interested in making an order, its team of highly skilled staff will be more than happy to assist you. The dedicated professionals will even source an item for you if the company itself doesn’t stock it, or find you a suitable alternative which will also do the job with great proficiency. look catalogue and logo, and we also refurbished our trade counter. We are currently in the process of creating a new website, which is set to go live in September.

T +44 (0)1234 242724 sales@windowware.co.uk www.windowware.co.uk

“One of our most exciting developments involves the integration of smart technology; we are looking into the supply of a door lock cylinder which uses NFC technology to helps customers open their doors more easily.

is sponsored by MPW Insurance Brokers | please turn to page XI

III

Underfloor Heating & Building Fabrics News

Underfloor Heating and Liquid Floor Screed

The Trade Association for all forms of Radiant Heating

Easyflow are renowned experts in providing innovative and premium quality flooring solutions (in the form of underfloor heating and liquid floor screeds). The Easyflow liquid screed is an approved contractor and installer for Calcium Sulphate Anhydrite Screed, a revolutionary product which has enhanced efficiency and productivity in today’s construction market. This form of screed is much more advantageous than its traditional prototype, particularly when it is used in accordance with underfloor heating. As well as being quick and cost-effective, its reduced depth reduces heat storage, creating a floor that responds more rapidly to user requirements. To provide a comprehensive package, the Easyflow underfloor heating was developed. These first class systems are specially installed by seasoned

professionals and are backed up by technical consultants, both of whom have a wealth of experience in the underfloor heating sector. Easyflow’s commitment to providing a high quality customer service is demonstrated through its extensive support system, which oversees the entire process (from consultation to installation). Its team of friendly, well-qualified engineers have the proficiency to install and test underfloor heating systems, ensuring that you are completely satisfied with the finished result.

The Underfloor Heating and Manufacturers Association (UHMA), part of BEAMA, focuses on all forms of radiant heating and sets the standards for design, installation and quality, promoting awareness of underfloor heating to many industry professionals. It acts as the central hub whereby technical expertise can be exchanged between businesses in the construction industry. Formed in 1996, the association was set up to endorse the best possible standards of design and application for radiant floor heating systems. Working

and disseminate the results of research into technical aspects of UFH whilst promoting awareness of underfloor heating (and its benefits).

alongside official bodies (including both local and national governments), UHMA sets the industry standards which must be abided and presents a collective voice offering advice at all levels. The trade body works strategically to meet its core objectives. It aims to initiate

UHMA members are predominantly businesses operating in the design and supply UFH systems and components, but those supplying components to builders’ merchants can also hold membership. Contact T +44 (0)20 7793 3000 uhma410@aol.com www.uhma.org.uk

Contact T +44 (0)845 017 9700 www.easyflow.org.uk

the underfloor experts

50m liquidm screed

pipes

100mm insulation sub floor

hidden

the secret to a perfect heating system

...it’s all underfloor!

the benefits: •

creates even room temperature & warmth under foot

•

lay tiles, wooden flooring or carpet

•

up to 30% lower running costs than radiators

•

no unsightly radiators or running noise, plus more wall space

•

a healthier environment – reduced dust can assist asthma sufferers

is sponsored by Access Platform Lifts | please turn to page V

Lifts & Access News

Lifts for Houses – the quality site for Home Lifts At Access & Platform Lifts Ltd, we supply and install all types of lifts for the home, public buildings and offices. A platform lift can now look and feel like a high quality lift.

With over 35 years’ experience in the Disabled Access market place, Access and Platform Lifts Ltd supply a quality range of Platform lifts, DDA Platform lifts and Domestic lifts, along with exceptional customer service. Offering a complete service from the initial survey to the installation and aftercare, you are guaranteed to receive the help and advice you deserve. From Budget Lifts through to deluxe units, Access and Platform Lifts aim to provide the best answer for your vertical access requirements.

We offer a complete service through from survey, installation and aftercare. We also have the widest range of access Lifts for both public buildings and home domestic use. From Budget Lifts through to deluxe units, we aim to be able to provide the best answer for your vertical access requirement. Give us a call today for a quotation on our next generation of platform lifts to get the lift you deserve.

Access & Platform Lifts Ltd 209 Carlton Road, Worksop, Nottinghamshire S81 7HN

The best choice for Platform Lifts

www.accessandplatformlifts.co.uk www.liftsforhouses.co.uk www.residentiallift.co.uk 01909 486704/0203 189704

The company offer the widest range of access lifts for both public buildings and home domestic use. Platform Lifts are designed to give ease of access to all floors at an affordable cost. They can be installed with minimal builders work with a small pit and can be installed within a shaft or standalone units with their own enclosure. You can even have a Platform Lift with full cabin and sliding lift doors to give a fully automated Lift.

Access & Platform’s DDA Platform Lifts will help you meet your DDA and Part M Requirements. They can provide Enclosed Platform Lifts, Open Lifts up to 3m travel, Step Lifts up to 1m travel, Platform Lifts, Platform Lift full car Auto doors, External Platform Lifts, Through Floor Lifts and Standing Home Lifts. Contact T +44 (0)1909 486704 info@accessandplatformlifts.co.uk www.accessandplatformlifts.co.uk www.liftsforhouses.co.uk

Renders & Facades News

K Rend – The UK’s largest independent silicone render manufacturer Marketing leading K Rend is the UK’s largest independent silicone render manufacturer. For over 25 years, K Rend has offered a high quality extensive range of external silicone renders and finishes, designed to give a durable weatherproof coating and a natural finish. The company is committed to excellence, innovation and teamwork in providing the highest quality products and technical service support. The K Rend manufacturing plant has some of the most advanced production facilities in Europe. It was designed with the environment, customers and future growth in mind. The K Rend silicone range incorporates silicone water repellents as an integral part of the cement based render system. This silicone technology imparts a high degree of water repellency to the render surface whilst allowing water vapour to pass through the render allowing the substrate to breathe.

The water repellent surface ensures a freshly rendered appearance for a prolonged period. The finish is drier and thus more resistant to algae growth and the natural phenomenon of lime bloom. This natural looking finish is available in an extensive Colour Range. A Specialised team of Chemists in a state of the art bespoke facility work diligently with the latest technology to develop and test new products to meet the changing needs of our customers and the environment. T +44 (0)28 2826 0766 sales@k-rend.co.uk www.k-rend.co.uk

The world’s leading authority within the Glass and Glazing Industry The GGF, known as the Glass and Glazing Federation in full, is the key representative for businesses working in the glass and glazing sector, both in the UK and internationally. The group sets the essential industry standards that enable the best possible practice for companies who manufacture, supply or fit glass and glazing products. As a leading authority figure, the GGF helps to shape policy and legislation, actively striving to endorse the necessary technical and health and safety ideals to those in both the commercial and domestic divisions. The dominant body is recognised by the government and consequently plays a significant part in the setting of new guidelines, such as The Building Regulations, the rules governing the way buildings are constructed in the UK.

is sponsored by MPW Insurance Brokers | please turn to page XI

GGF’s membership base comprises companies that make and install energy efficient windows and performance glass in homes and commercial properties. The highly qualified specialists can also produce and install safety, fire and emergency glazing; special films with the ability to protect against the sun’s rays (as well as terrorist and vandal attacks). There are numerous benefits of becoming a GGF member. Being associated with such an important organisation will make companies appear much more attractive to potential clients, as involvement demonstrates a concentrated commitment to quality, professionalism and above all, legal compliancy. T +44 (0)207 939 9101 www.ggf.org.uk

Building News

Muller’s Smart Carts UK “As with all good products, the original Muller’s cart was created out of a need for something better.” The humble beginnings of the Smart Cart In 1975, Brigadier General Henry Muller of Santa Barbara in California realised that his 60 year old wife was struggling to man the wheelbarrow in their stable without back pain. Understanding how much his wife loved her horses, he set to designing and creating the first easy to use, lightweight, durable, well-balanced stable cart in the market which he called The Muller’s Stablemate. It became successful in the American market, was renamed ‘The Muller’s Smart Cart’ and is now made in Goreham, Maine. Four years ago David Fortune’s wife purchased a Smart Cart having seen one belonging to a friend. He put it together for her and thought it was a fantastic product. Later, after discovering that his aged mother’s gardener was struggling to dispose of grass cuttings from her vast lawns, he decided to buy her one but discovered that they were no longer available in the UK. David ordered her Smart Cart directly from Maine and offered to be Muller’s Smart Carts’ new distributor in the UK. They appointed him and Smart Carts UK was born. What makes the Smart Cart so ‘smart’? “The carts are perfectly balanced, they are light, easily manoeuvrable and very little lifting is required. They’re also

built to last decades – 20 to 30 years is not unusual. “The weight of the load in a Smart Cart in motion is balanced over the wheels. Unlike the traditional wheelbarrow design – with a single wheel at one end of the tub and lifting required on the other end – only a little leverage – not lifting of the Smart Cart – is necessary to move the centre of gravity over the wheels, making the cart ideal for those with mobility issues and back pain. Its pair of wheels makes it completely stable and controllable with one hand. “Due to the materials used in a Smart Cart, they are known to last well over 25 years,” David continued. “Each product comes with a 5 year warranty, but the combination of the aircraft quality aluminium alloy frame, the steel cross member, axle and wheels and the exceptionally tough, high impact polyethylene of the tub makes the cart tough, light and virtually indestructible.” How can your Smart Cart transform your daily life? “Wherever you use the carts, whether in the garden, in the stable or on the farm, they are incredibly versatile. Rust resistant and leak free, whatever the season. A Smart Cart makes child’s

lasting wheelbarrow alternative. The great ‘tip forward’ design makes it simple to unload soil, grass cuttings and even paving stones. Originally designed specifically for stable work, the Smart Cart makes mucking out a pleasure it never used to be!”

play out of transporting your straw, hay, feed or heavy fertiliser from A to B. An easily connected tow bar is available to turn your cart into a trailer behind an ATV, even over rough ground. Fill it with ice, beer and wine and your summer party will go with a swing! Gardeners will rejoice in this long-

With huge capacity (7 and 12 cu ft options), two colours and wheel sizes (16” and 20” diameter) available, why not invest in a Smart Cart? In addition to the carts, see also the Easy Connect Towbar, Muck Caddy and Smart Water Cart. For more information and to order yours now, please visit: www.smartcartsuk.com, email: info@smartcartsuk.com or call David Fortune on: +44 (0)7850 204714.

is sponsored by Access Platform Lifts | please turn to page V

Rooflights News High quality rooflights that are clearly the right solution

With over 20 years’ experience in the manufacture and distribution of rooflights, Whitesales can provide the right product for any application. Our innovative, environmentally-friendly rooflights are thoughtfully designed to last the test of time…

01483 271371 sales@whitesales.co.uk www.whitesales.co.uk

Building News

Natural daylight is an invaluable asset that has long been recognised as the most effective form of light. It can benefit the health of the building’s occupants by boosting immune systems, aiding normal sleep patterns, and lifting moods. It also increases concentration and mental and visual stimulation, resulting in greater productivity. This is especially important for schools and offices. As well as health benefits, natural light will lead to a reduction in energy bills, electricity usage, CO2 emissions and, consequently, environmental impact. It furnishes buildings with performance that satisfies building regulations and assists in meeting sustainability targets and gaining BREEAM credits. Another valuable advantage is the huge improvement to interior aesthetics, to the point where retail sales are shown to increase with natural light. Artfully designed flat roof rooflights flood interiors with up to three times more daylight than equivalent windows. The light from a rooflight is also more evenly distributed throughout the room, less likely to result in glare or compromise of privacy. Whitesales rooflights are designed to transform the gloomiest of interiors and are equally suited to commercial, education, domestic, leisure and health-related buildings. They improve the quality of the built

is sponsored by MPW Insurance Brokers | please turn to page XI

environment and enhance the quality of life. Whitesales has over 20 years’ experience in the manufacture and distribution of speciality flat roofing products and has the dedication and resource to fulfil the most demanding of requirements throughout the UK. Our experienced and expert personnel have an in-depth knowledge of industry regulations, which ensures we provide up-to-date advice on fully compliant solutions. Available in glass or polycarbonate glazing with a wide range of ventilation and upstand options, our rooflights are available from stock in a range of standard modular sizes, or made-tomeasure bespoke designs. To find out more, visit our website: www.whitesales.co.uk, or contact Whitesales’ technical sales and support team on: +44 (0)1483 271371 or at: sales@whitesales.co.uk.

VII

Doors & Windows News

Raising Standards As a hugely respected trade body, The Door & Hardware Federation (DHF) represents all of the frontrunners in the marketplace; from manufacturers of locks, building hardware and architectural ironmongery to distributors and installers of industrial, commercial, pedestrian and garage doors and powered gates. The DHF – whose roots can be traced back to 1897 – is renowned for being one of the biggest trade associations of its kind, with a membership base of over 280 well-established names. Because the group prides itself on its commitment to sustainability, quality and professionalism, all of its esteemed members operate within a rigorous code of conduct governing standards of workmanship, training, safety, business integrity and CE marking compliance. The federation is split into six divisions, promoting and protecting the interests of key players involved in: garage doors, building hardware, industrial doors, powered gates, timber door sets and metal door sets.

It is fully wide-ranging in the respect that it provides specialists in all niches with a single source of technical expertise, information, knowledge, advice and practical help. The DHF tactically endeavours to support its members in complying with the latest CE marking and health and safety legislation, giving members a competitive edge over those who are yet to adhere to these regulations. This also means that environmental impacts are kept to an absolute minimum in a bid to keep the design, assembly and maintenance processes across businesses as ecological as possible. T +44 (0)1827 52337 info@dhfonline.org.uk www.dhfonline.org.uk

The Voice of the UK’s Rooflight Industry The National Association of Rooflight Manufacturers, also known as NARM, effectively acts as a hub of authoritative information for rooflight specialists, overseeing the development and maintenance of industry-specific rules and regulations. Established in 1998, NARM plays an active role in advising the government on future building regulations, specifically concentrating on the application of thorough procedures in the provision of natural light in built environments. The trade body represents a vast array of companies within the rooflight design and manufacturing faction in the UK. This includes experts in the production of in-plane profiled rooflights, continuous barrel vaults, modular domes/pyramids, panel glazing systems and architectural glazing systems for

VIII

Made by Clement – experts in steel fenestration and building conservation the Clement Conservation Rooflight is a replica of a Victorian original designed so that the rooflight lies flush with your roofline, in keeping with the original character of your property. It is the only of its type to be available from stock in two profiles to ensure only the best look for your project. • Made from seriously robust steel sections, with a polyzinc and polyester powder paint coating • Includes a 24mm double glazed, argon filled, self-cleaning glass unit

skylights, lantern lights and atria. All members of NARM are committed to the delivery of excellent customer service and the promotion of good business practice. The associates are renowned for focussing on quality, compliancy and further development, offering balanced advice on the use of rooflights, rooflight materials and rooflight systems with clarity and confidence. Additionally, any products supplied are compliant with all of the relevant UK and European Standards and Building Legislation. Contact T +44 (0)1908 692325 admin@narm.org.uk www.narm.org.uk

The Clement Conservation Rooflight

• Revolutionary T bar system means optimum performance is achieved • Tested against wind and rain to BS6375 • Choice of slate or tile profile • COMPETITIVELY priced • Bespoke sizes available

Creating light...

beautifully

Call our sales team today on: 01428 643393 or visit: www.clementconservationrooflights.co.uk for more information.

CLEMENT superb steel windows

is sponsored by Access Platform Lifts | please turn to page V

Flooring News

Insurance News

GYPSOL anhydrite screed binder: The new name from an established manufacturer: • Offers a cost-effective and environmentally friendly alternative to labour intensive and

problematic traditional sand cement screeds • Can be used with or without underfloor heating • Well suited to all building types.

Whether you are an architect, designer, main contractor, self builder or a flooring contractor, our website is designed to ensure that you have at your fingertips all of the information neccessary to maximise the benefit of GYPSOL screed in your project. We will be attending at the following shows: 25th–27th September 2015 The National Homebuilding and Renovating Show – Excel London 6th–8th October 2015 UK Construction Week – NEC Birmingham 24th–25th October 2015 The National Homebuilding and Renovating Show – Edinburgh 6th–8th November 2015 The National Homebuilding and Renovating Show – Northern (Harrogate) 10th–11th November 2015 Greenbuild Expo – Manchester 21st–22nd November 2015 The National Homebuilding and Renovating Show – Southwest (Somerset/Bath)

Please contact us on 01928 574574 Email: ff@francisflower.co.uk | www.gypsol.co.uk Please follow us: @GypsolScreed

Timber Engineering News

+THE TIMBER ENGINEERING EXPERTS Scotts Timber Engineering is an exciting new company that has been established in the West Midlands, with the support and resources of a well established and respected family business, Scotts of Thrapston.

Heating News LARGEST MANUFACTURERS OF INDUSTRIAL HEATING ELEMENTS IN THE UK

Leading the Way

This new, innovative company specialises in timber engineering, taking the benefits of environmentally friendly timber as a construction material and exploiting its strengths to achieve 21st century design solutions. Scotts Timber Engineering personnel have the expertise to design and supply high quality roof trusses, easi-joist metal web beams, spandrel panels, feature trusses and timber frame solutions for almost any application. +TRUSSED RAFTERS +QUALITY ROOF TRUSSES Roof trusses (or trussed rafters) are widely accepted as an economical method of providing a structural frame for a wide variety of roof profiles. Scotts Timber Engineering, based in the West Midlands, can offer their friendly and expert advice to create a trussed rafter roof for your application, whether domestic housing, commercial or industrial buildings. At the forefront of modern roofing technology, Scotts is fully committed to upholding the highest industry standards. +WHAT ARE ROOF TRUSSES? Roof trusses are individually designed pre-fabricated timber components made from strength-graded timber and joined together with punched metal plate connectors. They provide a structural framework to support the roof fabric of a building, ceilings and floors. Pre-fabricated timber trussed rafters are used in over 90% of all modern housing developments and an ever increasing proportion of commercial buildings. Roof Trusses from Scotts Timber Engineering offer the benefit of being manufactured from high grade softwood, a renewable resource, in quality controlled factory conditions to achieve the most efficient design as well as inherent Health and Safety benefits.

For more information, please give Scotts Timber a call on: 01527 520550 Email: trusses@scottste.co.uk | www.scottste.co.uk

• Mica Heaters • Nozzle Heaters • Cartridge Heaters • Ceramic Knuckle Heaters • Thermocouples • Immersion Heaters • Tubular Heaters • Square Section Heaters • Air Duct Heaters

Tel: 029 2077 8727 • Fax: 029 2079 2297 Email: sales@elmatic.co.uk www.elmatic.co.uk

is sponsored by MPW Insurance Brokers | please turn to page XI

Building News

The sign of building quality The Federation of Master Builders, known as FMB for short, holds the prestigious position as the largest trade association in the building industry in the UK. The nonprofiting, independent firm operates both nationally and regionally, with offices situated in England, Northern Ireland, Scotland and Wales. Ever since its formation in 1941, the FMB has actively aimed to protect the interests of both small and medium-sized building companies, explicitly representing their interests and opinions in order to increase awareness of the work they do. The trade body’s vision is to place the FMB construction companies in a strong position in the sector, allowing them to deliver their high quality services and excellent value wherever possible. Acting as a hub of industry-appropriate knowledge and expertise, the highly-qualified group collectively strives to provide support and professional advice to clients, helping them to fulfil all of their building and construction goals. T +44 (0)20 7025 2900 membership@fmb.org.uk www.fmb.org.uk

Clean & reliable An Ultra Clean Diaphragm Valve made by HAMLET is being used in a satellite propulsion system produced by OHB Sweden. The SGEO stationary satellite propulsion system uses electric power to expel Xenon at a very high velocity in order to generate thrust.

Flexible hose line Manufacturer of industrial instrumentation valves and compression fittings, HAM-LET used the 2014 Offshore Technology Conference (OTC) in Houston, Texas, to showcase its new line of flexible hoses.

HAM-LET’s UCV diaphragm valve was chosen due to its clean operation and high reliability. High-pressure high-flow models from the Ultra-Clean Valve Series are made to Ultra High Purity specifications. These come with end connections in two alternative sizes, ¼ and ½in. With their

compact design, these valves can perform in high-pressure, highflow applications including their use as shut-off valves at pressures up to 21MPa (3,060psi). Contact T +44 (0)1444 487555

The new flexible hose line includes five series of all stainless steel hose assemblies and three series of PTFE core stainless steel braided hose assemblies. These high specification hoses are typically used in industrial, process and instrumentation applications and systems. HAM-LET’s hoses range in size from ¼ to 2in I.D. and can handle working pressures to 6,000psi (413bar).

All HAM-LET hose assemblies are fitted with the company’s high quality fittings, and are said to provide maximum usability and compliance with the highest safety levels. Contact T 01444 487555 www.ham-let.com

Specialist providers of Property Development Finance If you are seeking finance for yourself or your clients, to build, convert or develop residential property for profit, Bishopsgate Finance is the name you can trust. Established in 1997, the company was set up to provide specialist property Finance to builders, developers, investors and speculators. With services available throughout England and Wales, the company can offer short term property finance either direct or via intermediaries. Over the last few years small builders firms have found it increasingly hard to gain finance from banks. Bishopsgate Finance is there to guide you through the process, making finance more accessible to customers in a quick and easy way. The privately owned company offers the kind of flexibility that is hard to find. Their decisions are based on the commercial merits of a proposal, and the primary concern is whether your scheme is commercially viable. The many benefits available from this service come hand in hand with an

unrivalled level of customer service. The experienced team provide a fast and confidential service offering streamlined access to property finance. A dedicated decision maker is always on hand to help understand your needs and the challenges you face. Bishopsgate Funding are also looking to fund auction purchases, chapel or barn conversions, flat conversions or commercial premises into residential use. T +44 (0)161 273 5188 enquiries@bishopsgatefunding.com www.bishopsgatefunding.com

Finance for Builders £50–£400,000

Magnetic Walls from Abel Magnets It is possible to create a magnet receptive wall, commonly referred to as a magnetic wall, using Flexometal© sheet available from Abel Magnets.

33 New build and property conversions 33 Barns, Farms and chapel conversions 33 Up to 100% of build costs 33 Whole of England and Wales 33 Semi commercial considered 33 Internet roll up on most cases 33 Complex deals catered for 33 Fast, flexible finance.

Contact: 0161 273 5188 www.bishopsgatefunding.com

Flexometal is, as the name suggests, a flexible ferrous sheet material. Plain Flexometal can be used as lining paper and then decorated over with any regular thickness wallpaper of your choice (or a plain lining paper and then painted over). The result – a wall that looks like any other but one that you can stick magnets to! Ideal for nurseries, kids’ bedrooms and playrooms. Flexometal is also available with a dry wipe face. Many clients have used dry wipe faced Flexometal to convert a whole wall into a magnetic whiteboard. Ideal for meeting rooms, creative thinking spaces and education/presenting environments. Dry

wipe faced Flexometal has been used recently to create walls like this in the Cabinet Office and for other prestigious clients such as John Lewis, Waitrose, GlaxoSmithKline, Hewlett Packard plus many more. Flexometal has been fire tested at the Building Research Establishment and classified to Euroclass fire resistance classification EN13501-1. It is the only ferrous sheet available in the UK that carries this classification giving you peace of mind that putting Flexometal sheet up on the walls of any building will not cause a fire hazard. Abel Magnets also supply a full range of magnetic sheet, magnetic tape and other magnetic products – please visit our website for more information.

Balaclava Road, Sheffield, S6 3BG. T: 0114 2495949 F: 0114 2495950 www.abelmagnets.com

is sponsored by Access Platform Lifts | please turn to page V

Insurance News

MPW Insurance Brokers Ltd MPW were founded in 1986 as specialist construction insurance brokers. We work closely with the construction industry and a number of trade bodies including the HBF who have endorsed our Housebuilders insurance policy, a bespoke policy wording with cover enhancements specifically developed for this industry sector. We are able to offer technical support to our clients regarding the insurance requirements of building contracts, our knowledge and understanding of these contractual obligations particularly in respect of JCT contracts and collateral warranty issues give our clients the confidence to treat us as their inhouse insurance department. Our team of experienced brokers have also built strong relationships with insurers and this has enabled us to produce insurance solutions

unacceptable and a fundamental requirement for building contractors, and our policies will exclude the damaged or faulty component only.

(Pictured) Ian Gregory, Director at MPW Insurance Brokers for certain industry concerns, our housebuilders policy for example provides cover for completed operations up to the point of sale, standard cover would normally cease at completion leaving the developer with either an uninsured property or the costly alternative of insuring an unoccupied building. We view this as completely

It is vitally important that your insurance provider understands the demands of your industry and have the knowledge and solutions in place to allow you to develop your business without the concerns of inadequate insurance. If you would like to discuss any aspect or have any concerns regarding your existing covers then we would be happy to review, further information can be found on our website: www.mpwbrokers.com Our team of construction Brokers may be contacted on: +44 (0)1622 683913 or email: construction@mpwbrokers.com

Acoustics News

The UK’s professional body for those working in acoustics, noise and vibration The Institute of Acoustics (IOA), which was formed in 1974, is a nominated body of the Engineering Council. It is an established professional association operating in the UK to tend to those working in acoustics, noise and vibration. IOA’s membership base comprises 3000 organisations. This impressive figure ensures there is a strong crossfertilisation of ideas and initiatives, as the members come from a rich diversity of backgrounds (with engineers, scientists, educators, lawyers, occupational hygienists, architects and environmental health officers within the mix). The group discuss all aspects of the acoustics umbrella, as their interests span all associated branches. This includes aerodynamics, architectural acoustics, building acoustics, electroacoustics, engineering dynamics, noise & vibration, hearing, speech, underwater acoustics and a range of environmental aspects. These members are offered guidance from IOA’s Continuous Professional Development support

Conservatories News

scheme, a feature which is becoming progressively more acknowledged as a critical element in ensuring that professionals can keep informed with rapidly changing technological and regulatory matters. The institute works closely in connection with other professional bodies in related fields, including CIEH, REHIS and IOSH and the Association of Noise Consultants. Its work relies heavily on the voluntary contributions of its standing committees as well as council members. T +44 (0)1727 848195 ioa@ioa.org.uk www.ioa.org.uk

Supplying quality acoustic products in the UK Trim Acoustics has for more than 25 years been at the forefront of building acoustics, supplying quality acoustic products from the UK’s major manufacturers to the building industry and domestic market. Providing technical advice, site surveys and specifications to architects and developers, Trim Acoustics can assist with projects ranging from house conversions and new build properties to bespoke designs for customers who have specific requirements. Trim Acoustics offers solutions for floors, ceilings and walls that can achieve Document E standard and with a wide range of quality acoustics products stocked at our four branches covering Greater London, West Midlands and the South West and can offer a prompt delivery service direct to site. The addition of their new production and warehouse facility in God Manchester,

Cambridgeshire has given Trim Acoustics the ability to increase production and quality of their Defender range of acoustics products to satisfy increased demand. The domestic market has for many years been one of Trim Acoustic’s areas of expertise, providing acoustic solutions to people whose quality of life has been affected by noise problems. Offering a suitable solution in plain English often means that the noise problem can be identified and resolved on the telephone and within a few days the materials can be delivered and installed. With a wealth of technical expertise and practical experience Trim Acoustics can offer a wide range of solutions via the telephone and on site. T +44 (0)20 84430099 www.trimacoustics.co.uk

is sponsored by MPW Insurance Brokers | please turn to page XI

Building Classified

+THE TIMBER ENGINEERING EXPERTS GYPSOL anhydrite screed binder: The new name from an established manufacturer: • Offers a cost-effective and environmentally friendly alternative to labour intensive and problematic

traditional sand cement screeds

Scotts Timber Engineering is an exciting new company that has been established in the West Midlands, with the support and resources of a well established and respected family business, Scotts of Thrapston.

• Well suited to all building types.

Scotts Timber Engineering personnel have the expertise to design and supply high quality roof trusses, easi-joist metal web beams, spandrel panels, feature trusses and timber frame solutions for almost any application.

We will be attending at the following shows:

+TRUSSED RAFTERS

25th–27th September 2015 The National Homebuilding and Renovating Show – Excel London

+QUALITY ROOF TRUSSES Roof trusses (or trussed rafters) are widely accepted as an economical method of providing a structural frame for a wide variety of roof profiles. Scotts Timber Engineering, based in the West Midlands, can offer their friendly and expert advice to create a trussed rafter roof for your application, whether domestic housing, commercial or industrial buildings. At the forefront of modern roofing technology, Scotts is fully committed to upholding the highest industry standards.

• Can be used with or without underfloor heating

6th–8th October 2015 UK Construction Week – NEC Birmingham 24th–25th October 2015 The National Homebuilding and Renovating Show – Edinburgh 6th–8th November 2015 The National Homebuilding and Renovating Show – Northern (Harrogate)

+WHAT ARE ROOF TRUSSES? Roof trusses are individually designed pre-fabricated timber components made from strength-graded timber and joined together with punched metal plate connectors. They provide a structural framework to support the roof fabric of a building, ceilings and floors. Pre-fabricated timber trussed rafters are used in over 90% of all modern housing developments and an ever increasing proportion of commercial buildings.

10th–11th November 2015 Greenbuild Expo – Manchester 21st–22nd November 2015 The National Homebuilding and Renovating Show – Southwest (Somerset/Bath)

Please contact us on 01928 574574 Email: ff@francisflower.co.uk | www.gypsol.co.uk Please follow us: @GypsolScreed

Roof Trusses from Scotts Timber Engineering offer the benefit of being manufactured from high grade softwood, a renewable resource, in quality controlled factory conditions to achieve the most efficient design as well as inherent Health and Safety benefits.

For more information, please give Scotts Timber a call on: 01527 520550 Email: trusses@scottste.co.uk | www.scottste.co.uk

apt fabrics 2014’ Award

the Year RY tion of ST INDU Innova ‘Product SOLUTIONS4 2014’ ar W Ye e REVIE ny of th CTION ‘Compa NSTRU CO ING &

BUILD

r 2014

Winne

S WARD ING A

OTH AL CL

SSION

PROFE

Pioneering waterproof fabrics manufactured in the UK

T 02842 758 661 www.aptfabrics.co.uk www.aclimatise.co.uk

XII

is sponsored by Access Platform Lifts | please turn to page V

Building Classified Dolwin

Gray

Established 1969

We specialise in the design & manufacture of Timber Frame Buildings, Trussed Rafters, Holiday Lodges & Ecojoist engineered floor beams Hedge, Copse & Woodland planting (Transplants to semi-mature) Cultivation & Seeding Paddocks etc Turfing

To discuss your project call us now! 01262 481511 www.yorkshiretimbereng.com

INDEPENDENT FLOOD MANAGEMENT SOLUTIONS With 50 years’ combined experience and expertise in the flood risk management, flood protection and flood control industry, Aquobex provides protection in the forms of flood resistance (dry-proofing) and flood resilience (wet-proofing) for businesses, communities, homes and infrastructure.

All aspects of Tree Work, Surveys and Reports to BS5837:2012 Trees in Relation to Design, demolition and construction – Recommendations

Tel: 01892 853232 • Fax: 01892 853434 Email: enquiries@dolwinandgray.co.uk www.dolwinandgray.co.uk

Our approach takes the form of an accredited, wholly independent and insurable service delivered in a supportive, consultancy style.

For more information on flood management solutions relevant to your circumstances contact the team on: 01923 518582, email: enquiries@aquobex.com or visit: www.aquobex.com

HEDGE TRIMMERS Suitable for Mini-Diggers HC180

HC150

Bar Length-1.8m Excavator Range-3-7T

Bar Length-1.5m Excavator Range-1.5-3T

HS55 HS55

Plastic Flail Cutting Diameter-550mm Will cut up to 25mm Excavator Range-2.5-7.5 ton

01992 611415

Saw Head Blade Diameter-550mm Will cut up to 8 inch Excavator Range-2.5-7.5 ton HS Conversion Kit Available to interchange HS55 Saw Head and HS55 Plastic Flail

2005-2015

years

Please contact: 00353 469024858 • Email: slanetracsales@gmail.com www.slanetrac.ie • Dean Hill Hayes, Navan, Co.Meath, Ireland

barry@barryperrin.com

Drayton Tank & Accessories Ltd Specialists in Water Storage Tanks T 0871 288 4213 www.draytontank.co.uk

www.barryperrin.com

With many years of experience in the commercial and domestic markets, Rooflight Architectural can manufacture and supply, lantern lights, pitched glazing and walk-on rooflights to any size or specification. We offer technical advice, CAD drawings and nationwide installation.

...perfect illumination

Contact 0191 273 7738

Email: sales@rooflight.co.uk • www.rooflight.co.uk

CORVUS ECOLOGY CONSULTING was formed two and a half years ago following 14 years working in professional consultancy. Our aim is to provide well researched, cost-effective pragmatic ecological solutions without compromising our overall ethos.

CLOSE THE GAP WITH

We utilise advice from experienced and licensed ecologists to provide sustainable, professional and cost-effective solutions to assist in the development process. We carry out a full range of surveys ranging from a simple constraints survey which would indicate what there might be on a section of land that is being considered for potential development, to a full scale suite of surveys to satisfy planning conditions.

Corvus Ecology Consulting

FOR FURTHER INFORMATION telephone 01524 761822 www.corvusecologyconsulting.co.uk

Are you worried about the damage water leaks cause in your bathrooms and shower areas? or the costly clean-up and redecorating? but you still want to keep your existing shower curtains...at last there is a solution. Splashblade is an elegant white, anodised or chrome finished aluminium profile with a stainless steel insert that is simply attached to the wall adjacent to the shower head by industrial grab adhesive tape.

Tel: +44 (0)114 2359048 • www.splashblade.com

is sponsored by MPW Insurance Brokers | please turn to page XI

XIII

Commitment to Excellence

Providing Expert Tree Care Since 2005 Building Solutions UK is proud to present Cedarwood Tree Care and commend its team for achieving its highly coveted Commitment to Excellence profile.

retaining trees on a development site will make development unviable. However, there is an array of tools available to enable developers to achieve what was previously unthinkable. It is now possible to construct parking near to trees, and to plant trees in the middle of car parks. For one client who needed to create additional parking near his offices, and bought the derelict land from the local authority, the requirement to plant new trees on the site was proving challenging as there was little space available. Someone suggested reducing the number of parking spaces! However, with the use of subterranean infrastructure, we

The team at Cedarwood Tree Care work hard to provide a high quality service to clients seeking to manage trees. From the assessment of trees for safety through to amenity management and assessing for retention suitability on potential development sites, they apply best practice and pioneering ideas to equip clients whether you have one tree or many. Led by principle consultant Mark Chester, an accredited expert witness, advice can be provided on a range of scenarios from Home Buyer Tree Reports to guide mortgage applications, tree safety inspections, tree reports to BS 5837:2012 (often required by local authorities for planning applications involving trees) and providing amenity tree valuations. Money may not grow on trees, but we can provide a monetary value depending on the situation.

(Pictured) Mark Chester, Principle Consultant at Cedarwood Treecare

Dealing with trees within Conservation Areas and those subject to Tree Preservation Orders, whether within a development scenario or not, can present different challenges. One client with a Willow tree in a Conservation Area proposed for felling was informed that a TPO was to be served on the tree to protect it. He felt helpless in knowing how to resolve the issue, until he called for our help. We were able to identify appropriate pruning and soon obtained the necessary consent. When a new TPO is made, we can provide an appropriate response, whether objecting or ensuring accuracy. We can also help with tree work applications and appeals. Boundary disputes can become protracted and emotive. We seek to identify the key issues and propose solutions, and whatever the issue, our in-house expert is willing to attend court if needed.

were able to accommodate the trees with soil in reinforced crates under the parking bays, enabling the planning conditions to be met and the site enhanced. Other pioneering ideas include using NFC tags for trees, which allows information with smartphones and tablets.” What makes us different? We are committed to excellence, and have been subject to a range of independent assessments for the skills we offer. Principal consultant Mark Chester, he is both a qualified Professional Tree Inspector and hands the prestigious ISA TRAQ qualification. Our report template for BS5837 tree reports has been peer reviewed to ensure it meets the requirements of the standard. Mark is also a Cardiff University Expert Witness. A Fellow of the Arboricultural Association, he commits to keeping up to date with CPD to ensure our advice is timely and relevant. T +44 (0)1981 570426 enquiries@cedarwoodtreecare.co.uk www.cedarwoodtreecare.co.uk

We seek to keep up to date with pioneering ideas. This includes the selection of trees suitable for each situation. People sometimes assume that

Architectural & Structural Specialists Building Solutions UK is delighted to present Demon Designs with its highlyregarded Commitment to Excellence profile.

design opportunities means that products can be tailored particularly to accommodate side hung or pivoting versions, self-closing or free swing.

The company, which specialises in the provision of bespoke glass design solutions, is located in in Ford, near Arundel, West Sussex. Established in 2011, the refined specialists are best known for supplying and fitting meticulously constructed staircases and balustrades, splashbacks, shop fronts, walk-on glass floors/bridges, glass ceilings, glass roofs and aluminium curtain walling. Their work also extends to custom-made door solutions, automatic entrances, sliding glass doors, shop fronts and glass canopies.

“What sets us apart from other companies is our wide range of experience and in-depth product knowledge,” commented Dominic Meakins, founder and owner of Demon Designs. “If it’s made of glass we can do it! Our in-house team each have over 20 years’ experience, and they have a reputation for design excellence. We have provided design consultancy for a wide range of clients, including some competitors, and you can’t get much better praise than a competitor asking you for advice!”

Essentially, Demon Designs offers a one-stop service for all glass product requirements. They supply a vast range of flush, individually fabricated double glazed acoustic doors achieving up to 44dB(Rw) acoustic performance, and the promise of bespoke

The organisation has a vast client base, serving both small and medium sized building contractors as well as general builders, domestic customers and large construction companies. They are happy to take on a variety of different projects; previous jobs

have included installing automatic doors at the visually distinctive Walkie Talkie building on Fenchurch Street in Central London, as well as the general fitting of kitchen splashbacks and shower screens.

more in-house capability,” Dominic explained. “Our new unit (only 2 doors away from our current unit) is twice the size, and will feature a dedicated clean-room for manufacturing our flush, double glazed acoustic doors.

To ensure that customers are completely satisfied after making an enquiry, Demon Designs provides a fully comprehensive sales package. Invaluable consultations provide customers with reassurance and input, as all project requirements can be discussed at length. Precise drawings, detailed quotations and technical information are further additions which help to supplement this process in order to ease the client’s peace of mind.

“These flush, double glazed acoustic doors are our biggest area of expansion at the moment. They provide good sound reducing qualities while still providing the clean glass look that is required in modern offices. We have several standard designs, but also can make bespoke versions to suit our clients’ needs. With our new premises, we will now also be holding stock of standard door sizes, to enable us to provide the fastest turnaround in the industry!”

Continued development and popularity has resulted in the business moving to a larger site, “Due to our success over the last 4 years, we are expanding into bigger premises to enable

Contact T +44 (0)1903 733206 info@demon-designs.co.uk www.demon-designs.co.uk

Printed by Iliffe Newspapers • Distributed by Media Matters Direct, Tel: 07966 152259, www.mediamattersdirect.co.uk