StarValve 2016 Catalogue by Sonuç İstanbul

N E W

S T A R

O F

T H E

V A LV E

I N D U S T R Y

NEW STAR OF THE VALVE INDUSTRY

Starvalve provides industrial valves and actuators for high chemical corrosive / aggresive fluids and other fluids.

Our main products that pneumatic actuated, electrical actuated and manuel controlled; butterfly valves, ball valves, diaphragm valves, knife gate valves, pinch valves, thermoplastic and PTFE/ PFA lined pipe & fittings use as successfully in chemical and petro-chemical plants, Chlorine-Alkali Plants, Iron&Steel Industries, Copper Electrolise Plants, Aluminum Anodising Plants, Fertilizer Plants, Water and Wastewater Treatment Plants, Coating Plants, Mining Industries and Ship Building Industries.

THERMOPLASTIC PRODUCTS

CONTENT

SV210 Series, Double Union, Industrial Type Ball Valves SV210 Series, Flanged, Industrial Type Ball Valves SV210 Series, Pneumatic Actuated, Industrial Type Ball Valves SV210 Series, Electrical Actuated, Industrial Type Ball Valves SV230 Series, Double Union, Industrial Type Three Ways Ball Valves SV230 Series, Pneumatic Actuated, Industrial Type Three Ways Ball Valves SV230 Series, Electrical Actuated, Industrial Type Three Ways Ball Valves SV110 Series, Double Union, Economical Type Ball Valves SV310 Series, Double Union, Industrial Type Butterfly Valves SV310 Series, Pneumatic Actuated, Industrial Type Butterfly Valves SV310 Series, Electrical Actuated, Industrial Type Butterfly Valves SV410 Series, Double Union, Industrial Type Diaphragm Valves SV410 Series, Flanged, Industrial Type Diaphragm Valves DK Series, Pneumatic Actuated Diaphragm Valves SV420 Series, Pressure Control Valves SV610 Series, Double Union, Industrial Type Ball Check Valves SV620 Series, Industrial Type Swing Check Valves SV630 Series, Industrial Type Foot Valves SV650 Series, Wafer Type Swing Check Valves RV Series, Double Union, Y-Type Strainer S22 Series, 2/2 U-PVC Solenoid Vanalar SV930 Series, U-PVC Pipe and Fittings SV930 Series, PP-H Pipe and Fittings SV930 Series, PVDF Pipe and Fittings SV930 Series, C-PVC Pipe and Fittings

PFA LINED PRODUCTS

SV930 Series, Clear-PVC Pipe and Fittings

SV350 Series, PTFE (Teflon) Lined Butterfly Valves SV450 Series, PFA (Teflon) Lined Diaphragm Valves SV260 Series, PFA Lined Plug Valves SV250 Series, PFA (Teflon) Lined Ball Valves SV910 Series, PTFE (Teflon) Expansion Joint SV930 Series, PFA/PTFE Lined Pipe and Fittings

SV320 Series, Pneumatic Actuated, Wafer Type Metal Butterfly Valves SV320 Series, Electrical Actuated, Wafer Type Metal Butterfly Valves SV330 Series, Double Union, Lug Type Metal Butterfly Valves SV330 Series, Pneumatic Actuated, Lug Type Metal Butterfly Valves SV330 Series, Electrical Actuated, Lug Type Metal Butterfly Valves

METAL VALVES

SV320 Series, Double Union, Wafer Type Metal Butterfly Valves

SV222 Series, Pneumatic Actuated, Bras Ball Valves SV222 Series, Electrical Actuated, Bras Ball Valves SV223 Series, Pneumatic Actuated, Three Ways Ball Valves SV223 Series, Electrical Actuated, Three Ways Ball Valves SV224 Series, Pneumatic Actuated, Monoblock Type Flanged Ball Valves SV224 Series, Electrical Actuated, Monoblock Type Flanged Ball Valves SV225 Series, Pneumatic Actuated, Two Pieces Type Flanged Ball Valves SV225 Series, Electrical Actuated, Two Pieces Type Flanged Ball Valves SV233 Series, Pneumatic Actuated, Three Ways Ball Valves SV233 Series, Electrical Actuated, Three Ways Ball Valves SV950 Series, Wafer Type Manuel Knife Gates Valves SV950 Series, Pneumatic Actuated, Wafer Type Knife Gates Valves

SV930 Series, Pneumatic Actuator Accessories STAR-E Series, Electric Actuators STAR-EV Series, Electric Actuators

ACTUATORS

SV945 Series, V-Port Segment Ball Valves

THERMOPLASTIC PRODUCTS

SV210 SERIES

TECHNICAL ADVANTAGES • ½” ~ 4” sizes, • Drinking water standarts, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Specially designed for heavy industrial applications, • Double o-ring shaft design, • Friction and wearing resistance PTFE (Teflon) ball seal,

DOUBLE UNION, INDUSTRIAL TYPE BALL VALVES

MATERIAL OPTIONS

CONNECTION TYPE

U-PVC

MAXIMUM 55°C

Socket Solvent Cement (U-PVC, C-PVC)

C-PVC

MAXIMUM 95°C

Threaded End (U-PVC, C-PVC, PP-H, PVDF)

PP-H

MAXIMUM 95°C

Socket Welded (PP-H - PVDF)

PVDF

MAXIMUM 140°C

Flanged Butt Welded (U-PVC, (PP-H C-PVC, - PVDF) PP-H, PVDF)

TRANSPARENT-PVC MAXIMUM 55°C

• Reducing the wearing of PTFE seat with back-up o-ring for frequently opening/closing applications, • Safe mounting with a special locking ball system, • Water applications EPDM O-ring, Asidic applications VITON O-ring alternatives, • Made of PPS material with braket&shaft ISO5211 directly according to mounting actuator top flanged, • 100% tightness testing before shipment, • DIN, ANSI, JIS norms

TECHNICAL DRAWING

Butt Welded (PP-H - PVDF)

THERMOPLASTIC PRODUCTS / BALL VALVES

TECHNICAL ADVANTAGES

SV210 SERIES

• ½” ~ 4” (DN15 ~ DN100) sizes, • Drinking water standarts, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Specially designed for heavy industrial applications, • Double o-ring shaft design, • Friction and wearing resistance PTFE (Teflon) ball seal, • Reducing the wearing of PTFE seat with back-up o-ring for frequently opening/closing applications, • Safe mounting with a special locking ball system, • Water applications EPDM O-ring, Asidic applications VITON O-ring alternatives, • Made of PPS material with braket&shaft ISO5211 directly according to mounting actuator top flanged, • 100% tightness testing before shipment, • DIN, ANSI, JIS norms

FLANGED, INDUSTRIAL TYPE BALL VALVES

MATERIAL OPTIONS

CONNECTION TYPE

APPLICATION AREA

U-PVC

MAXIMUM 55°C

Socket Solvent Flanged Joint Cement (U-PVC, C-PVC)

MAXIMUM 95°C

Threaded End (U-PVC, C-PVC, PP-H, PVDF)

• Chemical and Petrochemical Industry,

• Mining Industry,

C-PVC PP-H

MAXIMUM 95°C

Socket Welded (PP-H - PVDF)

• Water and Process Technologies,

• Cooling Systems,

PVDF

MAXIMUM 140°C

Flanged (U-PVC, C-PVC, PP-H, PVDF)

• In the Shipbuilding and Yacht Industry,

• Coating Plant,

TRANSPARENT-PVC MAXIMUM 55°C

Butt Welded (PP-H - PVDF)

THERMOPLASTIC PRODUCTS / BALL VALVES

• Food Industry

• Electrolysis Premises,

SV210 SERIES

TECHNICAL ADVANTAGES • ½” ~ 4” sizes, • Drinking water standarts, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added,

PNEUMATIC ACTUATED INDUSTRIAL TYPE BALL VALVES

• Specially designed for heavy industrial applications, • Double o-ring shaft design, • Friction and wearing resistance PTFE (Teflon) ball seal, • Reducing the wearing of PTFE seat with back-up o-ring for frequently opening/closing applications, • Safe mounting with a special locking ball system, • Water applications EPDM O-ring, Asidic applications VITON O-ring alternatives, • Made of PPS material with braket&shaft ISO5211 directly according to mounting actuator top flanged, • 100% tightness testing before shipment, • DIN, ANSI, JIS norms

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

U-PVC

MAXIMUM 55°C

Socket Solvent Cement (U-PVC, C-PVC)

• Aluminum extruded body,

C-PVC

MAXIMUM 95°C

Threaded End (U-PVC, C-PVC, PP-H, PVDF)

PP-H

MAXIMUM 95°C

Socket Welded (PP-H - PVDF)

PVDF

MAXIMUM 140°C

Flanged (U-PVC, C-PVC, PP-H, PVDF)

• Double acting or single acting (spring return) pneumatic actuator options,

TRANSPARENT-PVC MAXIMUM 55°C

Butt Welded (PP-H - PVDF)

• Optional with NAMUR valve type air direction, • 3-15ps or proportional control with a choice of 4-20 mA

• Optional on / off switch box with mechanical or proximity limit,

THERMOPLASTIC PRODUCTS / BALL VALVES

TECHNICAL ADVANTAGES

SV210 SERIES

• ½” ~ 4” sizes, • Drinking water standarts, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Specially designed for heavy industrial applications, • Double o-ring shaft design, • Friction and wearing resistance PTFE (Teflon) ball seal, • Reducing the wearing of PTFE seat with back-up o-ring for frequently opening/closing applications, • Safe mounting with a special locking ball system, • Water applications EPDM O-ring, Asidic applications VITON O-ring alternatives, • Made of PPS material with braket&shaft ISO5211 directly according to mounting actuator top flanged, • 100% tightness testing before shipment, • DIN, ANSI, JIS norms

ELECTRICAL ACTUATED INDUSTRIAL TYPE BALL VALVES

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

U-PVC

MAXIMUM 55°C

Socket Solvent Cement (U-PVC, C-PVC)

C-PVC

MAXIMUM 95°C

Threaded End (U-PVC, C-PVC, PP-H, PVDF)

• 24V DC, 24V AC, 220V AC, 110V AC power supply options,

PP-H

MAXIMUM 95°C

Socket Welded (PP-H - PVDF)

PVDF

MAXIMUM 140°C

Flanged (U-PVC, C-PVC, PP-H, PVDF)

TRANSPARENT-PVC MAXIMUM 55°C

Butt Welded (PP-H - PVDF)

THERMOPLASTIC PRODUCTS / BALL VALVES

• Proportional control with a choice of 4-20 mA, • The possibility of manual intervention when the power cut,

LEVER HANDLE, THREE WAYS BALL VALVES

• Water applications EPDM O-ring, Asidic applications VITON O-ring alternatives, • Made of PPS material with braket&shaft ISO5211 directly according to mounting actuator top flanged, • 100% tightness testing before shipment, • Working pressure Max:10 Bar, • DIN, ANSI, JIS Norms,

MATERIAL OPTIONS

CONNECTION TYPE

U-PVC

MAXIMUM 55°C

Socket Solvent Cement (U-PVC, C-PVC)

C-PVC

MAXIMUM 95°C

Threaded End (U-PVC, C-PVC, PP-H, PVDF)

PP-H

MAXIMUM 95°C

Socket Welded (PP-H - PVDF)

PVDF

MAXIMUM 140°C

Butt Welded (PP-H, PVDF) Flanged

THERMOPLASTIC PRODUCTS / BALL VALVES

SV230 SERIES TECHNICAL ADVANTAGES • ⅜” ~ 2” (DN10 ~ DN50) sizes, • Both L-type and T-type working option, • Drinking water standarts, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Specially designed for heavy industrial applications, • Water applications EPDM O-ring, Asidic applications VITON O-ring alternatives, • Made of PPS material with braket&shaft ISO5211 directly according to mounting actuator top flanged, • 100% tightness testing before shipment, • Working pressure Max:10 Bar, • DIN, ANSI, JIS Norms,

PNEUMATIC ACTUATED, THREE WAYS BALL VALVES

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

U-PVC

MAXIMUM 55°C

Socket Solvent Cement (U-PVC, C-PVC)

• Aluminum extruded body,

C-PVC

MAXIMUM 95°C

Threaded End (U-PVC, C-PVC, PP-H, PVDF)

PP-H

MAXIMUM 95°C

Socket Welded (PP-H - PVDF)

PVDF

MAXIMUM 140°C

Butt Welded (PP-H, PVDF)

• Double acting or single acting (spring return) pneumatic actuator options,

Flanged

THERMOPLASTIC PRODUCTS / BALL VALVES

• Optional with NAMUR valve type air direction, • 3-15ps or proportional control with a choice of 4-20 mA,

• Optional on / off switch box with mechanical or proximity limit,

SV230 SERIES TECHNICAL ADVANTAGES • ⅜” ~ 2” (DN10 ~ DN50) sizes, • Both L-type and T-type working option,

ELECTRICAL ACTUATED, THREE WAYS BALL VALVES

• Drinking water standarts, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Specially designed for heavy industrial applications, • Water applications EPDM O-ring, Asidic applications VITON O-ring alternatives, • Made of PPS material with braket&shaft ISO5211 directly according to mounting actuator top flanged, • 100% tightness testing before shipment, • Working pressure Max:10 Bar, • DIN, ANSI, JIS Norms,

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

U-PVC

MAXIMUM 55°C

Socket Solvent Cement (U-PVC, C-PVC)

• 24V DC, 24V AC, 220V AC, 110V AC power supply options,

C-PVC

MAXIMUM 95°C

Threaded End (U-PVC, C-PVC, PP-H, PVDF)

• Proportional control with a choice of 4-20 mA,

PP-H

MAXIMUM 95°C

Socket Welded (PP-H - PVDF)

• The possibility of manual intervention when the power cut,

PVDF

MAXIMUM 140°C

Butt Welded (PP-H, PVDF) Flanged

THERMOPLASTIC PRODUCTS / BALL VALVES

SV110 SERIES TECHNICAL ADVANTAGES • ½” ~ 4” sizes, • Drinking water standarts, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Double o-ring shaft design, • Safe mounting with a special locking ball system, • 100% tightness testing before shipment, • DIN, ANSI, JIS norms

DOUBLE UNION, ECONOMICAL TYPE BALL VALVES

MATERIAL OPTIONS

CONNECTION TYPE

U-PVC

Socket Solvent Cement

MAXIMUM 55°C

Flanged

THERMOPLASTIC PRODUCTS / BALL VALVES

SV310 SERIES

TECHNICAL ADVANTAGES • 2” ~ 10” (DN50 ~ DN300) size options, • DIN2501 PN10 flange standarts wafer type connection, • Drinking water standarts,

LEVER HANDLE, INDUSTRIAL TYPE BUTTERFLY VALVES

MATERIAL OPTIONS

CONNECTION TYPE

U-PVC

MAXIMUM 55°C

• Wafer Type Buttefly Valve

C-PVC

MAXIMUM 95°C

• Wafer Type Flanged Set Butterfly Valve

PP-H

MAXIMUM 95°C

PVDF

MAXIMUM 140°C

• CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Specially rigid designed for heavy industrial applications, • EPDM or VITON seat options for fluid types, • Higher corrosion resistance with PP valve, • ISO5211 according to directly assembled actuators top flanged, • Lower open/close torque, • Maximum operating pressure 10 bar, • 100% tightness testing before shipment, • DIN, ANSI, JIS norms,

TECHNICAL DRAWING

THERMOPLASTIC PRODUCTS / BUTTERFLY VALVES

TECHNICAL ADVANTAGES

SV310 SERIES

• 2” ~ 12” (DN50 ~ DN300) size options, • DIN2501 PN10 flange standarts wafer type connection, • Drinking water standarts, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Specially rigid designed for heavy industrial applications, • EPDM or VITON seat options for fluid types, • Higher corrosion resistance with PP valve, • ISO5211 according to directly assembled actuators top flanged, • Lower open/close torque, • Maximum operating pressure 10 bar, • 100% tightness testing before shipment, • DIN, ANSI, JIS norms,

PNEUMATIC ACTUATED INDUSTRIAL TYPE BUTTERFLY VALVES

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

U-PVC

MAXIMUM 55°C

• Wafer Type Buttefly Valve

• Aluminum extruded body,

C-PVC

MAXIMUM 95°C

• Wafer Type Flanged Set Butterfly Valve

PP-H

MAXIMUM 95°C

PVDF

MAXIMUM 140°C

• Double acting or single acting (spring return) pneumatic actuator options,

THERMOPLASTIC PRODUCTS / BUTTERFLY VALVES

• Optional with NAMUR valve type air direction, • 3-15ps or proportional control with a choice of 4-20 mA,

• Optional on / off switch box with mechanical or proximity limit,

SV310 SERIES

TECHNICAL ADVANTAGES • 2” ~ 10” (DN50 ~ DN300) size options,

ELECTRICAL ACTUATED, INDUSTRIAL TYPE BUTTERFLY VALVES

• DIN2501 PN10 flange standarts wafer type connection, • Drinking water standarts, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Specially rigid designed for heavy industrial applications, • EPDM or VITON seat options for fluid types, • Higher corrosion resistance with PP valve, • ISO5211 according to directly assembled actuators top flanged, • Lower open/close torque, • Maximum operating pressure 10 bar, • 100% tightness testing before shipment, • DIN, ANSI, JIS norms,

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

U-PVC

MAXIMUM 55°C

• Wafer Type Buttefly Valve

C-PVC

MAXIMUM 95°C

• Wafer Type Flanged Set Butterfly Valve

• 24V DC, 24V AC, 220V AC, 110V AC power supply options,

PP-H

MAXIMUM 95°C

PVDF

MAXIMUM 140°C

• Proportional control with a choice of 4-20 mA, • The possibility of manual intervention when the power cut,

THERMOPLASTIC PRODUCTS / BUTTERFLY VALVES

SV410 SERIES TECHNICAL ADVANTAGES • ½” ~ 4” sizes, • Drinking water standarts, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Specially designed for heavy industrial applications, • 100% tightness testing before shipment, • Working pressure Max: 10 Bar, • DIN, ANSI, JIS norms,

MATERIAL OPTIONS

CONNECTION TYPE

U-PVC

MAXIMUM 55°C

Socket Solvent Cement (U-PVC, C-PVC)

C-PVC

MAXIMUM 95°C

Socket Welded (PP-H - PVDF)

PP-H

MAXIMUM 95°C

Flanged (U-PVC, C-PVC, PP-H, PVDF)

PVDF

MAXIMUM 140°C

THERMOPLASTIC PRODUCTS / DIAPHRAGM VALVES

TRUE UNION, INDUSTRIAL TYPE DIAPHRAGM VALVES

TECHNICAL DRAWING

SV410 SERIES TECHNICAL ADVANTAGES

FLANGED, INDUSTRIAL TYPE DIAPHRAGM VALVES

MATERIAL OPTIONS

CONNECTION TYPE

U-PVC

MAXIMUM 55°C

Flanged

C-PVC

MAXIMUM 95°C

PP-H

MAXIMUM 95°C

PVDF

MAXIMUM 140°C

TECHNICAL DRAWING

TRANSPARENT-PVC MAXIMUM 55°C

THERMOPLASTIC PRODUCTS / DIAPHRAGM VALVES

DK SERIES TECHNICAL ADVANTAGES • ½” ~ 4” (DN15 ~ DN100) sizes, • Drinking water standarts, • EPDM or VITON seat options for fluid types, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Specially rigid designed for heavy industrial applications, • 100% tightness testing before shipment, • Working pressure Max: 10 Bar, • DIN, ANSI, JIS norms,

PNEUMATIC ACTUATED DIAPHRAGM VALVES

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

U-PVC

MAXIMUM 55°C

Socket Solvent Cement (U-PVC, C-PVC)

C-PVC

MAXIMUM 95°C

Threaded End (U-PVC, C-PVC, PP-H, PVDF)

PP-H

MAXIMUM 95°C

Socket Welded (PP-H - PVDF)

• Double acting or single acting (spring return) pneumatic actuator options,

PVDF

MAXIMUM 140°C

Flanged (U-PVC, C-PVC, PP-H, PVDF) Butt Welded (PP-H - PVDF)

THERMOPLASTIC PRODUCTS / DIAPHRAGM VALVES

• Optional on / off switch box with mechanical or proximity limit,

• Optional with NAMUR valve type air direction, • 3-15ps or proportional control with a choice of 4-20 mA,

SV420 SERIES TECHNICAL ADVANTAGES • ½”, ¾” ve 1” sizes, • Diaphragm type pressure control valves, • Both of Pressure loading valve and Pressure safety valve in dosing systems,

PRESSURE CONTROL VALVES

MATERIAL OPTIONS

CONNECTION TYPE

U-PVC

MAXIMUM 55°C

Socket Solvent Cement (U-PVC için)

PP-H

MAXIMUM 95°C

Threaded End (U-PVC, PP-H, PVDF, SS316L)

PP-PVDF

MAXIMUM 140°C

Socket Welded (PP-H - PVDF)

• PTFE diaphragm high corrosion resistance • U-PVC, PP-H, PVDF ve AISI316L material options for all kinds of corrosive fluids, • 1 – to 10 adjustable, • High flow capacity and low pressure loss,

TECHNICAL DRAWING

AISI316L

THERMOPLASTIC PRODUCTS / PRESSURE CONTROL VALVES

SV610 SERIES TECHNICAL ADVANTAGES

• ½” ~ 2” sizes, • Drinking water standarts, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Specially designed for heavy industrial applications, • Can be assembled vertically or horizontally, • Water applications EPDM O-ring, Asidic applications VITON O-ring alternatives, • 100% tightness testing before shipment, • Working pressure Max: 10 Bar, • DIN, ANSI, JIS norms,

DOUBLE UNION, INDUSTRIAL TYPE BALL CHECK VALVES

MATERIAL OPTIONS

CONNECTION TYPE

U-PVC

MAXIMUM 55°C

C-PVC

MAXIMUM 95°C

• Socket Solvent Cement Bağlantı (U-PVC, C-PVC için)

PP-H

MAXIMUM 95°C

• Threaded Connection (U-PVC, C-PVC)

TRANSPARENT-PVC MAXIMUM 55°C

TECHNICAL DRAWING

• Socket Welded (PP-H)

THERMOPLASTIC PRODUCTS / CHECK VALVES

SV620 SERIES TECHNICAL ADVANTAGES • 2½” ~ 8” (DN65 ~ DN200) Size Options, • Drinking water standarts, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Specially designed for heavy industrial applications,

INDUSTRIAL TYPE SWING CHECK VALVES

MATERIAL OPTIONS

CONNECTION TYPE

U-PVC

MAXIMUM 55°C

• Socket Solvent Cement

C-PVC

MAXIMUM 95°C

• Can be assembled vertically or horizontally, • Water applications EPDM O-ring, Asidic applications VITON O-ring alternatives, • 100% tightness testing before shipment, • Working pressure Max: 10 Bar, • DIN, ANSI, JIS norms,

TECHNICAL DRAWING

THERMOPLASTIC PRODUCTS / CHECK VALVES

SV630 SERIES TECHNICAL ADVANTAGES • 2½” ~ 8” (DN65 ~ DN200) Size Options, • Drinking water standarts, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Specially designed for heavy industrial applications, • Can be assembled vertically or horizontally, • Water applications EPDM O-ring, Asidic applications VITON O-ring alternatives, • 100% tightness testing before shipment, • Working pressure Max: 10 Bar, • DIN, ANSI, JIS norms,

MATERIAL OPTIONS

CONNECTION TYPE

U-PVC

MAXIMUM 55°C

• Socket Solvent Cement

C-PVC

MAXIMUM 95°C

THERMOPLASTIC PRODUCTS / FOOT VALVES

SINGLE UNION INDUSTRIAL TYPE FOOT VALVES

TECHNICAL DRAWING

SV650 SERIES TECHNICAL ADVANTAGES • 1½” ~ 12” (DN40 ~ DN300) Size Options, • Drinking water standarts, • CaCO3 calcite free 100% pure virgin material,

WAFER TYPE SWING CHECK VALVES

MATERIAL OPTIONS

CONNECTION TYPE

U-PVC

• Wafer Type (Assembled between two flanged)

MAXIMUM 55°C

• UV resistant powder added, • Specially designed for heavy industrial applications, • Can be assembled vertically or horizontally. • 100% tightness testing before shipment, • Working pressure Max: 10 Bar,

TECHNICAL DRAWING

THERMOPLASTIC PRODUCTS / CHECK VALVES

RV SERIES TECHNICAL ADVANTAGES • ⅜” ~ 4” (DN10 ~ DN100) sizes, • Drinking water standarts, • CaCO3 calcite free 100% pure virgin material, • UV resistant powder added, • Specially designed for heavy industrial applications, • 100% tightness testing before shipment, • Working pressure Max: 10 Bar, • DIN, ANSI, JIS Norms,

MATERIAL OPTIONS

CONNECTION TYPE

U-PVC

MAXIMUM 55°C

Socket Solvent Cement (U-PVC, C-PVC)

C-PVC

MAXIMUM 95°C

Threaded End (U-PVC, C-PVC, PP-H, PVDF)

PP-H

MAXIMUM 95°C

Socket Welded (PP-H - PVDF)

DOUBLE UNION, Y-TYPE STRAINER

TECHNICAL DRAWING

Flanged (U-PVC, C-PVC, PP-H, PVDF)

THERMOPLASTIC PRODUCTS / STRAINER

S22 SERIES TECHNICAL ADVANTAGES • S12 Serisi DN4, DN6, DN8 sizes, • S22 Serisi DN8, DN10, DN15 sizes, • 2/2 ve 3/2 working alternative,

2/2 U-PVC SOLENOID VALVES

MATERIAL OPTIONS

CONNECTION TYPE

U-PVC

Socket Solvent Cement

MAKSİMUM 50°C

• Drinking water standarts, • IP65 protection class, • EPDM or VITON diaphragm options, • Corrosion resistance materials

TECHNICAL DRAWING

THERMOPLASTIC PRODUCTS / SOLENOID VALVES

SV930 SERIES TECHNICAL ADVANTAGES • ½” ~ 12” size options, • Heat and electrical insulation, • Transporting/handling and mounting easily beause of the lightness, • Low coefficient of friction, • Acid and alkaline fluid resistant, • 55°C max working temperature, • 16 bar Max working pressure, • DIN, ANSI, JIS norms,

THERMOPLASTIC PRODUCTS / PIPE AND FITTINGS

U-PVC PIPE AND FITTINGS

SV930 SERIES TECHNICAL ADVANTAGES • ½” ~ 6” size options, • Socket welded and butt welded options, • Heat and electrical insulation, • Transporting/handling and mounting easily beause of the lightness, • Low coefficient of friction, • Acid and alkaline fluid resistant,

PP-H PIPE AND FITTINGS

• 95°C max working temperature, • 10/16 bar Max working pressure, • DIN, ANSI, JIS norms,

THERMOPLASTIC PRODUCTS / PIPE AND FITTINGS

SV930 SERIES TECHNICAL ADVANTAGES • ½” ~ 12” size options, • Heat and electrical insulation, • Transporting/handling and mounting easily beause of the lightness, • Low coefficient of friction, • Acid and alkaline fluid resistant, • 140°C max working temperature, • 10/16 bar Max working pressure, • DIN, ANSI, JIS norms,

THERMOPLASTIC PRODUCTS / PIPE AND FITTINGS

PVDF PIPE AND FITTINGS

C-PVC PIPE AND FITTINGS

• 16 bar Max working pressure, • DIN, ANSI, JIS norms,

THERMOPLASTIC PRODUCTS / PIPE AND FITTINGS

SV930 SERIES TECHNICAL ADVANTAGES • ½” ~ 8” size options, • When you need to visually monitor whatever is passing through the piping systems, • Heat and electrical insulation, • Transporting/handling and mounting easily beause of the lightness, • Low coefficient of friction, • Acid and alkaline fluid resistant, • 55°C max working temperature, • 10 ve 16 bar Max working pressure, • DIN, ANSI, JIS norms,

THERMOPLASTIC PRODUCTS / PIPE AND FITTINGS

CLEAR PVC PIPE AND FITTINGS

PFA / PTFE (TEFLON) LINED PRODUCTS

SV350 SERIES TECHNICAL ADVANTAGES • DN50 ~ DN1600 sizes, • Provide high corrosion resistance, especially Hydrochloric acid, nitric acid, hydrochloric acid, liquid chlorine, sulfuric acid etc,

PTFE (TEFLON) LINED BUTTERFLY VALVES

• Wafer type, lug type and double flanges body options, • With steel cast body more rigid opportunity to work, • Min. 3 mm PTFE (Teflon) lined on stainless steel disc, • With widely seat pressing surface, better tightness and easily mounting, • With two piece body design, easily maintenance, • 100% tightness testing before shipment, • 100% tightness test before shipment

MATERIAL OPTIONS

CONTROL OPTIONS

APPLICATION AREA

• Body; WCB Carbon Steel, AISI 304 Stainless Steel, AISI 316 Stainless steel

• Gear box or with lever handle control • ISO 5211 Top Flange, • On / Off or Proportional Control, Single or Double Acting Pneumatic Actuator, • On / Off or Proportional Control, 24V DC, 24V AC, 220V AC, 110V AC Electric Actuator,

• Applications in the chemical and petrochemical,

• Mining Industry,

• Chlor-Alkali Plant

• Ship Industry

• DİSC; AISI316 Stainless Steel or Min. 3mm PTFE (Teflon) coated AISI 304 Stainless steel,

• Sugar Process,

• Hydrochloric / sulfuric acid and so on. in corrosive applications, • Fertilizer Factory,

PFA / PTFE (TEFLON) LINED PRODUCTS / BUTTERFLY VALVES

SV450 SERIES TECHNICAL ADVANTAGES • DN50 ~ DN300 sizes, • Provide high corrosion resistance, especially Hydrochloric acid, nitric acid, hydrochloric acid, liquid chlorine, sulfuric acid etc, • With steel cast body more rigid opportunity to work, • 3mm PFA (Teflon) lined, • 100% tightness testing before shipment, • 100% tightness test before shipment

PFA (TEFLON) LINED DIAPHRAGM VALVES

MATERIAL OPTIONS

CONTROL OPTIONS

APPLICATION AREA

• Body; WCB Carbon Steel, AISI 304 Stainless Steel, AISI 316 Stainless steel

• Manuel Handwheel,

• Applications in the chemical and petrochemical,

• Mining Industry,

• Chlor-Alkali Plant

• Ship Industry

• Lining; PFA, FEP, POM

• On / Off and Proportional Control, Single or Double Acting Pneumatic Actuator

• Diaphragm; PFA, and FEP

• Sugar Process,

• Hydrochloric / sulfuric acid and so on. in corrosive applications, • Fertilizer Factory,

PFA / PTFE (TEFLON) LINED PRODUCTS / DIAPHRAGM VALVES

SV450 SERIES TECHNICAL ADVANTAGES • DN50 ~ DN300 sizes,

PFA (TEFLON) LINED PLUG VALVES

• Provide high corrosion resistance, especially Hydrochloric acid, nitric acid, hydrochloric acid, liquid chlorine, sulfuric acid etc, , • With steel cast body more rigid opportunity to work, • 3mm PFA (Teflon) lined, • 100% tightness testing before shipment, • 100% tightness test before shipment

MATERIAL OPTIONS

CONTROL OPTIONS

APPLICATION AREA

• Body; WCB Carbon Steel, AISI 304 Stainless Steel, AISI 316 Stainless steel

• Gear box or with lever handle manual control,

• Applications in the chemical and petrochemical,

• Mining Industry,

• Lining; Min.3mm PFA, FEP, POM

• On / Off and Proportional Control, Single or Double Acting Pneumatic Actuator,

• Chlor-Alkali Plant in,

• Ship Industry,

• Plug; min.3mm Lined Carbon Steel, AISI304 Stainless Steel, AISI316 Stainless Steel

• ISO5211 Direct actuator mounting mount pad,

• On / Off or Proportional Control, 24V DC, 24V AC, 220V AC, 110V AC Electric Actuator,

• Sugar Process,

• Hydrochloric / sulfuric acid and so on. in corrosive applications, • Fertilizer Factory,

PFA / PTFE (TEFLON) LINED PRODUCTS / PLUG VALVES

SV250 SERIES TECHNICAL ADVANTAGES • DN15 ~ DN350 sizes, • Provide high corrosion resistance, especially Hydrochloric acid, nitric acid, hydrochloric acid, liquid chlorine, sulfuric acid etc, • Min. 3mm PFA (Teflon) lined, • Carbon steel or stainless steel body material options, • Friction and wear-resistant PTFE (Teflon) ball seals, • 100% tightness testing before shipment, • 100% tightness test before shipment

PFA (TEFLON) LINED BALL VALVES

MATERIAL OPTIONS

CONNECTION TYPE

APPLICATION AREA

• Gövde; WCB Carbon Steel, AISI304 Stainless Steel, AISI316 Stainless Steel

• Gear box or Lever handle control • ISO 5211 Top Flange, • On / Off or Proportional Control, Single or Double Acting Pneumatic Actuator, • On / Off or Proportional Control, 24V DC, 24V AC, 220V AC, 110V AC Electric Actuator

• Applications in the chemical and petrochemical,

• Mining Industry,

• Chlor-Alkali Plant in,

• Ship Industry,

• Lining; PFA, FEP, PO

PFA / PTFE (TEFLON) LINED PRODUCTS / BALL VALVES

• Sugar Process,

• Hydrochloric / sulfuric acid and so on. in corrosive applications, • Fertilizer Factory,

SV910 SERIES TECHNICAL ADVANTAGES • DN25 ~ DN600 sizes, • Provide high corrosion resistance, especially Hydrochloric acid, nitric acid, hydrochloric acid, liquid chlorine, sulfuric acid etc, • With steel cast body more rigid opportunity to work, • Min. 3 mm PTFE (Teflon) lined on stainless steel disc, • With widely seat pressing surface, better tightness and easily mounting,

PTFE (TEFLON) EXPANSION JOINT

• With two piece body design, easily maintenance, • 100% tightness testing before shipment, • 100% tightness test before shipment

MATERIAL OPTIONS

CONNECTION TYPE

APPLICATION AREA

• Flange; A105 Carbon Steel, AISI 304 Stainless Steel, AISI 316 Stainless steel, AISI316L Stainless Steel

Flanged

• Applications in the chemical and petrochemical,

• Mining Industry,

• Chlor-Alkali Plant in,

• Ship Industry,

• Bellows; Min. 3mm PTFE (Teflon)

• Sugar Process,

• Hydrochloric / sulfuric acid and so on. in corrosive applications, • Fertilizer Factory,

PFA / PTFE (TEFLON) LINED PRODUCTS / EXPANSION JOINT

SV930 SERIES TECHNICAL ADVANTAGES • DN25 ~ DN300 size options, • Pipe length; L ≤ 6.000mm, Dimension ≤ DN150

• L ≤ 4.000mm, Measuring > DN150

• Strong acids, alkalis, organic solvents, flammable and toxic fluid resistant, • 200°C max working temperature, • 16 bar Max working pressure, • DIN, ANSI, JIS Norms,

PFA / PTFE (TEFLON) LINED PRODUCTS / PIPE AND FITTINGS

PTFE/PFA LINED PIPE AND FITTINGS

METAL VALVES

SV320 SERIES TECHNICAL ADVANTAGES • 1½” ~ 24” (DN40 ~ DN600) Size Options, • Specially rigid designed fo heavy industrial applications,

LEVER HANDLE, WAFER TYPE BUTTERFLY VALVES

APPLICATION AREA • Mining Industry,

• Water and Process Technologies,

• Heating-Cooling System,

• -20°C ~ 204°C working temperature sealing option, • ISO5211 according to directly assembled actuators top flanged, • Lower open/close torque, • 16 bar Max working pressure, • 100% tightness testing before shipment, • DIN, ANSI, JIS norms,

DESIGN STANDARDS

• Chemical and Petrochemical Industry,

• In the Shipbuilding and Yacht Industry,

• According the type of fluid wide seat options (EPDM,Viton, Silicon, NBR, Neopren (CR), Hypalon)

• Food Industry,

• Design Standards; EN 558 Series 20 (DIN 3202 T3 K1), ISO 5752 Series 20, API 609 Table 1, BC 5155 Series 4 • Flange Standards; DIN 2501 PN6/PN10/PN16, ANSI B 16.15 Class 150,

AWWA C207 JIS B 2211-5K, JIS B 2212-10K • Sealing Standards; ISO5208 Category-3, API 598 Table-5, ANSI B 16-104, Class-6 • Peak Flange Standard; ISO5211 • Operating Pressure; Max.16 Bar

• Pressure Difference; Max.16 Bar • Vacuum; 0.2 Bar Absolute Pressure • Ex-proof Class; ATEX 94/9 / EC Group II, Category 2 GD • ABS Certification; ABS 1-1-7/7, 4-6-2/5.11

METAL VALVES / BUTTERFLY VALVES

SV320 SERIES TECHNICAL ADVANTAGES • 1½” ~ 24” (DN40 ~ DN600) Size Options, • Specially rigid designed for heavy industrial applications, • According the type of fluid wide seat options (EPDM,Viton, Silicon, NBR, Neopren (CR), Hypalon) • -20°C ~ 204°C working temperature sealing option, • ISO5211 according to directly assembled actuators top flanged, • Lower open/close torque, • 16 bar Max working pressure, • 100% tightness testing before shipment, • DIN, ANSI, JIS norms,

PNEUMATIC ACTUATED, WAFER TYPE BUTTERFLY VALVES

ACTUATOR FEATURES

DESIGN STANDARDS

• Aluminum extruded body, • Double acting or single acting (spring return) pneumatic actuator options, • Optional on / off switch box with mechanical or proximity limit, • Optional with NAMUR valve type air direction, • 3-15ps or proportional control with a choice of 4-20 mA,

• Design Standards; EN 558 Series 20 (DIN 3202 T3 K1), ISO 5752 Series 20, API 609 Table 1, BC 5155 Series 4 • Flange Standards; DIN 2501 PN6/PN10/PN16, ANSI B 16.15 Class 150,

METAL VALVES / BUTTERFLY VALVES

AWWA C207 JIS B 2211-5K, JIS B 2212-10K • Sealing Standards; ISO5208 Kategori-3, API 598 Table-5, ANSI B 16-104, Class-6 • Peak Flange Standard; ISO5211

• Operating Pressure; Max.16 Bar • Pressure Difference; Max.16 Bar • Vacuum; 0.2 Bar Absolute Pressure • Ex-proof Class; ATEX 94/9 / EC Group II, Category 2 GD • ABS Certification; ABS 1-1-7/7, 4-6-2/5.11

SV320 SERIES TECHNICAL ADVANTAGES • 1½” ~ 24” (DN40 ~ DN600) Size Options,

ELECTRICAL ACTUATED, WAFER TYPE BUTTERFLY VALVES

• Specially rigid designed for heavy industrial applications, • According the type of fluid wide seat options (EPDM,Viton, Silicon, NBR, Neopren (CR), Hypalon) • -20°C ~ 204°C working temperature sealing option, • ISO5211 according to directly assembled actuators top flanged, • Lower open/close torque, • 16 bar Max working pressure, • 100% tightness testing before shipment, • DIN, ANSI, JIS norms,

ACTUATOR FEATURES

DESIGN STANDARDS

• 24V DC, 24V AC, 220V AC, 110V AC power supply options,

• Design Standards; EN 558 Series 20 (DIN 3202 T3 K1), ISO 5752 Series 20, API 609 Table 1, BC 5155 Series 4 • Flange Standards; DIN 2501 PN6/PN10/PN16, ANSI B 16.15 Class 150,

• Proportional control with a choice of 4-20 mA, • The possibility of manual intervention when the power cut,

AWWA C207 JIS B 2211-5K, JIS B 2212-10K • Sealing Standards; ISO5208 Kategori-3, API 598 Table-5, ANSI B 16-104, Class-6 • Peak Flange Standard; ISO5211

METAL VALVES / BUTTERFLY VALVES

SV330 SERIES TECHNICAL ADVANTAGES • 1½” ~ 24” (DN40 ~ DN600) Size Options, • Specially rigid designed for heavy industrial applications, • According the type of fluid wide seat options (EPDM,Viton, Silicon, NBR, Neopren (CR), Hypalon) • -20°C ~ 204°C working temperature sealing option, • ISO5211 according to directly assembled actuators top flanged, • Lower open/close torque, • 16 bar Max working pressure, • 100% tightness testing before shipment, • DIN, ANSI, JIS norms,

HANDLE, LUG TYPE BUTTERFLY VALVES

APPLICATION AREA

DESIGN STANDARDS

• Chemical and Petrochemical Industry,

• Design Standards; EN 558 Series 20 (DIN 3202 T3 K1), ISO 5752 Series 20, API 609 Table 1, BC 5155 Series 4 • Flange Standards; DIN 2501 PN6/PN10/PN16, ANSI B 16.15 Class 150,

• Water and Process Technologies, • In the Shipbuilding and Yacht Industry, • Mining Industry, • Food Industry, • Heating-Cooling System,

METAL VALVES / BUTTERFLY VALVES

AWWA C207 JIS B 2211-5K, JIS B 2212-10K • Sealing Standards; ISO5208 Kategori-3, API 598 Table-5, ANSI B 16-104, Class-6 • Peak Flange Standard; ISO5211

SV330 SERIES TECHNICAL ADVANTAGES • 1½” ~ 24” (DN40 ~ DN600) Size Options,

PNEUMATIC ACTUATED, LUG TYPE BUTTERFLY VALVES

ACTUATOR FEATURES

DESIGN STANDARDS

• Design Standards; EN 558 Series 20 (DIN 3202 T3 K1), ISO 5752 Series 20, API 609 Table 1, BC 5155 Series 4 • Flange Standards; DIN 2501 PN6/PN10/PN16, ANSI B 16.15 Class 150,

AWWA C207 JIS B 2211-5K, JIS B 2212-10K • Sealing Standards; ISO5208 Kategori-3, API 598 Table-5, ANSI B 16-104, Class-6 • Peak Flange Standard; ISO5211

METAL VALVES / BUTTERFLY VALVES

SV330 SERIES TECHNICAL ADVANTAGES • 1½” ~ 24” (DN40 ~ DN600) size options, • Specially rigid designed for heavy industrial applications, • According the type of fluid wide seat options (EPDM,Viton, Silicon, NBR, Neopren (CR), Hypalon) • -20°C ~ 204°C working temperature sealing option, • ISO5211 according to directly assembled actuators top flanged, • Lower open/close torque, • 16 bar Max working pressure, • 100% tightness testing before shipment, • DIN, ANSI, JIS norms,

ELECTRICAL ACTUATED, LUG TYPE BUTTERFLY VALVES

ACTUATOR FEATURES

DESIGN STANDARDS

• 24V DC, 24V AC, 220V AC, 110V AC power supply options,

• Design Standards; EN 558 Series 20 (DIN 3202 T3 K1), ISO 5752 Series 20, API 609 Table 1, BC 5155 Series 4 • Flange Standards; DIN 2501 PN6/PN10/PN16, ANSI B 16.15 Class 150,

• Proportional control with a choice of 4-20 mA, • The possibility of manual intervention when the power cut,

METAL VALVES / BUTTERFLY VALVES

AWWA C207 JIS B 2211-5K, JIS B 2212-10K • Sealing Standards; ISO5208 Kategori-3, API 598 Table-5, ANSI B 16-104, Class-6 • Peak Flange Standard; ISO5211

SV222 SERIES TECHNICAL ADVANTAGES • ½” ~ 3” sizes, • Nickel plated brass body and ball,

PNEUMATIC ACTUATED BRASS BALL VALVES

ACTUATOR FEATURES

• Friction and wearing – resistance PTFE (teflon)ball seat, • ISO5211 according to directly assembled actuators top flanged, • 100% tightness testing before shipment,

TECHNICAL DRAWING

METAL VALVES / BALL VALVES

SV210 SERIES TECHNICAL ADVANTAGES • ½” ~ 4” sizes, • Nickel plated brass body and ball, • Friction and wearing – resistance PTFE (teflon)ball seat, • ISO5211 according to directly assembled actuators top flanged, • 100% tightness testing before shipment,

ACTUATOR FEATURES

ELECTRICAL ACTUATED BRASS BALL VALVES

TECHNICAL DRAWING

• 24V DC, 24V AC, 220V AC, 110V AC power supply options, • Proportional control with a choice of 4-20 mA, • The possibility of manual intervention when the power cut,

METAL VALVES / BALL VALVES

SV223 SERIES TECHNICAL ADVANTAGES • ¼” ~ 4” sizes,

PNEUMATIC ACTUATED, THREADED END BALL VALVES

• Anti-static ball shaft and body design, • Three pieces body provides easily assembly, • ISO5211 according to directly assembled actuators top flanged, • DIN3202-M3 Norms • Friction and wearing resistance PTFE (Teflon) ball seal, • 100% tightness testing before shipment, • DIN, ANSI, JIS Norms

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

• AISI304 Stainless Steel

• Threaded End

• Aluminum extruded body,

• AISI316 Stainless Steel

• Butt Welded

• A216 WCB Carbon Steel

• Socket Welded

• Double acting or single acting (spring return) pneumatic actuator options,

• Optional with NAMUR valve type air direction, • 3-15ps or proportional control with a choice of 4-20 mA

• Optional on / off switch box with mechanical or proximity limit,

METAL VALVES / BALL VALVES

SV223 SERIES TECHNICAL ADVANTAGES • ¼” ~ 4” sizes, • Anti-static ball shaft and body design, • Three pieces body provides easily assembly, • ISO5211 according to directly assembled actuators top flanged, • DIN3202-M3 Norms • Friction and wearing resistance PTFE (Teflon) ball seal, • 100% tightness testing before shipment, • DIN, ANSI, JIS Norms

ELECTRICAL ACTUATED, THREADED END BALL VALVES

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

• AISI304 Stainless Steel

• Threaded End

• AISI316 Stainless Steel

• Butt Welded

• 24V DC, 24V AC, 220V AC, 110V AC power supply options,

• A216 WCB Carbon Steel

• Socket Welded

• Proportional control with a choice of 4-20 mA, • The possibility of manual intervention when the power cut,

METAL VALVES / BALL VALVES

SV224 SERIES

PNEUMATIC ACTUATED MONOBLOCK TYPE FLANGED BALL VALVES

TECHNICAL ADVANTAGES • DN15 ~ DN100 sizes, • Anti-static ball shaft and body design, • One -piece body takes up less space • ISO5211 direct mounting actuator mount pad • Friction and wearing resistance PTFE (Teflon) ball seal, • 100% tightness test before shipment • DIN, ANSI norms

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

• AISI304 Stainless Steel

• Flanged

• Aluminum extruded body,

• AISI316 Stainless Steel • A216 WCB Carbon Steel

• Double acting or single acting (spring return) pneumatic actuator options,

• Optional with NAMUR valve type air direction, • 3-15ps or proportional control with a choice of 4-20 mA

• Optional on / off switch box with mechanical or proximity limit,

METAL VALVES / BALL VALVES

SV224 SERIES TECHNICAL ADVANTAGES • DN15 ~ DN100 sizes, • Anti-static ball shaft and body design, • One -piece body takes up less space • ISO5211 direct mounting actuator mount pad • Friction and wearing resistance PTFE (Teflon) ball seal, • 100% tightness test before shipment • DIN, ANSI norms

ELECTRICAL ACTUATED MONOBLOCK TYPE FLANGED BALL VALVES

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

• AISI304 Stainless Steel

• Flanged

• 24V DC, 24V AC, 220V AC, 110V AC power supply options,

• AISI316 Stainless Steel • A216 WCB Carbon Steel

• Proportional control with a choice of 4-20 mA, • The possibility of manual intervention when the power cut,

METAL VALVES / BALL VALVES

SV225 SERIES

PNEUMATIC ACTUATED TWO PIECES TYPE FLANGED BALL VALVES

TECHNICAL ADVANTAGES • DN15 ~ DN200 Sizes, • Anti-static ball, shaft and boddy design , • Providing to easy maintenance two pieces body • ISO5211 direct mounting actuator mount pad • Friction and wear resistantPTFE (Teflon) ball seal, • 100% tightness test before shipment • DIN, ANSI norms

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

• AISI304 Stainless Steel

• Flanged

• Aluminum extruded body,

• AISI316 Stainless Steel • A216 WCB Carbon Steel

• Double acting or single acting (spring return) pneumatic actuator options,

• Optional with NAMUR valve type air direction, • 3-15ps or proportional control with a choice of 4-20 mA

• Optional on / off switch box with mechanical or proximity limit,

METAL VALVES / BALL VALVES

SV225 SERIES TECHNICAL ADVANTAGES • DN15 ~ DN200 Sizes, • Anti-static ball, shaft and boddy design, • Providing to easy maintenance two pieces body • ISO5211 direct mounting actuator mount pad • Friction and wear resistant PTFE (Teflon) ball seal, • %100 tightness test before shipment • DIN, ANSI norms

ELECTRICAL ACTUATED TWO PIECES TYPE FLANGED BALL VALVES

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

• AISI304 Stainless Steel

• Flanged

• 24V DC, 24V AC, 220V AC, 110V AC power supply options,

• AISI316 Stainless Steel • A216 WCB Carbon Steel

• Proportional control with a choice of 4-20 mA, • The possibility of manual intervention when the power cut,

METAL VALVES / BALL VALVES

SV233 / SV234 SERIES TECHNICAL ADVANTAGES

PNEUMATIC ACTUATED THREE WAYS BALL VALVES

• ¼” ~ 4” sizes, • Anti-static ball, shaft and body design, • L-Port and T-Port working alternative, • ISO5211 direct mounting actuator mount pad • Friction and wearing resistance PTFE (Teflon) ball seal, • %100 tightness test before shipment • DIN, ANSI norms

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

• AISI304 Stainless Steel

• Threaded End

• Aluminum extruded body,

• AISI316 Stainless Steel

• Double acting or single acting (spring return) pneumatic actuator options,

• Optional with NAMUR valve type air direction, • 3-15ps or proportional control with a choice of 4-20 mA

• Optional on / off switch box with mechanical or proximity limit,

METAL VALVES / BALL VALVES

SV233 / SV234 SERIES TECHNICAL ADVANTAGES • Anti-static ball, shaft and body design, • L-Port and T-Port working alternative, • ISO5211 direct mounting actuator mount pad • Friction and wearing resistance PTFE (Teflon) ball seal, • %100 tightness test before shipment • DIN, ANSI norms

ELECTRIC ACTUATATED THREE WAYS BALL VALVES

MATERIAL OPTIONS

CONNECTION TYPE

ACTUATOR FEATURES

• AISI304 Stainless Steel

• Threaded End

• 24V DC, 24V AC, 220V AC, 110V AC power supply options,

• AISI316 Stainless Steel

• Proportional control with a choice of 4-20 mA, • The possibility of manual intervention when the power cut,

METAL VALVES / BALL VALVES

SV950 SERIES TECHNICAL ADVANTAGES • DN50 ~ DN2000 size options, • The perfect solution for intensive control of fluids and solid particles,

WAFER TYPE MANUAL KNIFE GATE VALVES

• According to the type of fluid wide seal option, (Metal Contalı, EPDM, VITON, Silicon, NBR) • Preventing to fluid accumalation body design • %100 tightness test before shipment, • DIN, ANSI norms

ACCESSORIES

APPLICATION AREA

• Cleaning the surface of the knife with stainless steel scraper • Stellite coated knife for applications the high mechanical wearing, • Several holes can be drilled in the body to flush air, steam or other fluids out in order to clean the valve seat before sealing. • Gear box controlled for big sizes, • Lever handle controlled in emergency application, • With chain control and the extension root controls options

• Paper and cellulose industry,

• Applications in wastewater and sludge, • Mining Industry • Concrete Plants, • Under Silo Applications

METAL VALVES / KNIFE GATE VALVES

SV950 SERIES TECHNICAL ADVANTAGES • DN50 ~ DN2000 size options, • The perfect solution for intensive control of fluids and solid particles, • According to the type of fluid wide seal option, (Metal Contalı, EPDM, VITON, Silicon, NBR) • Preventing to fluid accumalation body design • %100 tightness test before shipment, • DIN, ANSI norms

PNEUMATIC ACTUATED, WAFER TYPE KNIFE GATE VALVES

ACCESORIES

APPLICATION AREA

PNEUMATIC ACTUATOR FEATURES

• Cleaning the surface of the knife, stainless steel scraper

• Paper and cellulose industry,

• Aluminum extrusion body

• Stellite coated knife for applications the high mechanical wearing,

• Applications in wastewater and sludge,

• Several holes can be drilled in the body to flush air, steam or other fluids out in order to clean the valve seat before sealing

• Mining Industry

• Double acting or single acting (spring return) pneumatic actuator options,

• Concrete Plants, • Under Silo Applications

METAL VALVES / KNIFE GATE VALVES

• Optional on / off switch box with mechanical or proximity limit,

• Optional with NAMUR valve type air direction, • 3-15ps or proportional control with a choice of 4-20 mA,

SV945 SERIES

V-PORT SEGMENT BALL VALVES

TECHNICAL ADVANTAGES • DN25 ~ DN250 Size wafer type, • DN25 ~ DN500 size double flange type, • With V-port ball linear control, • PTFE and Metal seat (Stellite coated AISI316 Stainless steel) options, • Stellite coated AISI316 with Stainless steel seat, in the high temperature and mechanical wearing resistance, • Hard chrome coated AISI316 with Stainless steel ball, ,in the high temperature and Mechanical wearing resistance, • According to the other type of valves: • The actuator can be mounting more easily, • Can be more easly mounting becuase of shorter lenght • More economical advantage • ISO5211 direct mounting actuator mount pad • On/off with low torque , • 10, 16, 25 bar pressure class, • %100 tightness test before shipment, • DIN, ANSI norms,

ACTUATOR FEATURES

APPLICATION AREA

• Aluminum extruded body,

• Paper Industry,

• Mining Industry,

• Double acting or single acting (spring return) pneumatic actuator options,

• Chemical and Petrochemical Industry,

• Food Industry

• Optional on / off switch box with mechanical or proximity limit,

• Water and Process Technologies,

• Heating-Cooling System,

• Optional with NAMUR valve type air direction,

• In the shipbuilding and yacht industry,

• 3-15ps or proportional control with a choice of 4-20 mA,

METAL VALVES / SEGMENT BALL VALVES

ACTUATORS

STAR-P SERIES TECHNICAL ADVANTAGES • 18Nm nd 13.673Nm torque range, • Corrosion hard anodized coated aluminum body and pistons, • ISO5211, DIN3337, acoording to NAMUR standarts, • Made with preload spring, single acting spring return pneumatic actuator options,

PNEUMATIC ACTUATORS

• According to accesories as Mechanical limit switch box, Namur type air direction valve positioner, manual owerride ger box manual owerride gear box,

ACTUATORS / PNEUMATIC ACTUATORS

PNEUMATIC ACTUATOR ACCESSORIES LIMIT SWITCH BOX • Standard IP67 enclosure, • 2 pcs Limit Switch with mechanical or proximity, • 3D On / Off Continuous Position Indicator, • According to NAMUR Standard all kinds of actuators can be mounting easily, • 8 Strips on terminal box allows direct connection of solenoid valve inside the switch box., • Optional Eexd II B T6 Ex-proof,

NAMUR TYPE AIR VALVE • Standard IP65 enclosure, • Direct mounting on NAMUR type actuators, • Lockable manual control, • Single coil and double coil alternative, • 5/2, 3/2 ve 5/3 working options, • Optional Eex m II T5 Ex-proof,

POSITIONERS • Rotary and linear type, • 3-15psi pneumatic positioner Input 4-20mA, 4-20mA Input / Output (feedback) and (smart) positioner options, • Can be applied both on double and single acting pneumatic actuators, • Ex d II B T6 Ex-proof, • Aluminum body,

ACTUATORS / PNEUMATIC ACTUATORS

STAR-E SERIES TECHNICAL ADVANTAGES • 30Nm and 6.000Nm torque range, • 0° ~ between 270° work facilities , • 24V DC, 110V DC, 110V AC, 220V AC, 380V AC supply options, • 4-20mA or with 0-10V proportional control facilities,

QUARTER TURN ELECTRIC ACTUATORS

• Standard in Protection Class IP67, optional IP68 protection class, • Standard open/close mechanical limit switch, • When power cut off with an allen open / close, • Local control unit, potentiometer options, • Super fast open/close options (2.5s, 5s, 10s, 15s) • Powder coated aluminum injection body, • ISO5211 standardization,

TECHNICAL SPECIFICATION

Actuator Supply Standard: 220VAC Optional 24VDC, 110VDC, 220VDC, 110VAC, 380VAC, 440VAC Control Signal 110VAC/220VAC 1 phase, 50/60Hz, ±%10 Motor Induction Motor Limit Switches Open/close 2 pcs (SPDT 250V AC 10A Work Angle 90° ~ 270° ±10° Thermal Protection Inside Thermal protection, open 120°C ±5°, close 97°C ±5° Position indicator Continuous position indication Manuel control With an allen open-close Self - Locking When the power is cut with double gear system locking position, Mechanical Stops Separately adjustable opening and closing direction bolted stops, Heater Anti-consending heater, Cable entry 2 pcs M18

ACTUATORS / ELECTRIC ACTUATORS

TECHNICAL ADVANTAGES • 50Nm and 5.000Nm torque range, • 0° between 270° work facilities, • 24V DC, 110V DC, 110V AC, 220V AC, 380V AC supply options, • 4-20mA or 0-10V proportional control facilities, • Standard in Protection Class IP67, Optional IP68 protection class, • Standard Open/Close mechanical limit switch, • When power cut off with manuel override open / close, • Local control unit, potentiometer options, • Powder coated aluminum injection body, • ISO5211 standardisation • Ex-proof (Exd II C T5) option,

STAR-EV SERIES

QUARTER TURN WITH MANUEL OVERRIDE ELECTRICAL ACTUATOR

TECHNICAL SPECIFICATION Actuator Supply Standard: 220VAC Optional 24VDC, 110VDC, 220VDC, 110VAC, 380VAC, 440VAC Control Signal 110VAC/220VAC 1 phase, 50/60Hz, ±%10 Motor Induction Motor Limit Switches Open/Close 2 pcs (SPDT 250V AC 10A) Tork Switch Open/Close 1 pcs (SPDT 250V AC 10A) (available STAR-EV 150 and up) Work Angle 90° ±10° Thermal Protection Inside Thermal protection, open 120°C ±5°, close 97°C ±5 Position Indicator Continuous position indication Manuel Control With Manuel Override Self - Locking When the power is cut with double gear system locking position, Mechanical Stops Separately adjustable opening and closing direction bolted stops, Heater Anti-consending heater Cable entry 2 pc PF ¾”

ACTUATORS / ELECTRIC ACTUATORS

GLOBAL CONNECT

Küre Endüstriyel Vana ve Plastik San. Tic. Ltd. Şti. Bilmo Sanayi Sitesi No:19 Aydınlı Mh. Tuzla / İstanbul - TURKEY T: +90 216 593 20 33 F: +90 216 593 20 34 info@StarValve.com.tr www.StarValve.com.tr

S T A R V A LV E . C O M . T R