201 5 2015 cata log MISSIONFIRSTTACTICAL.COM
1
2
MISSIONFIRSTTACTICAL.COM
Success of the Mission is what every brave individual operating in harm’s way strives for. And, success of the Mission is so fundamental to us; we named our company Mission First Tactical. Mission First Tactical develops select rifle/carbine accessories specifically for the military and law enforcement markets. Civilian shooters benefit from our leading edge, affordable products. Designed for enhanced accuracy and functionality, improving operator effectiveness. Every design is created, tested, and approved by top operators under the harshest of conditions. Recognizing the evolution of warfare and law enforcement missions, Mission First Tactical provides equally evolutionary products featuring advanced materials, smart design and technology. Proudly, along with E.I. DuPont’s Military Plastic Division, Mission First Tactical has developed new materials adding the advantage of weight reduction with increased strength and durability to our products. With 75 years of industry experience in our ownership team, Mission First Tactical takes concepts from ideas to front-line employment. Development and manufacturing processes are accomplished entirely in the U.S.A.
MISSION FIRST TACTICAL | 267-704-0001 | info@mftltd.com | MISSIONFIRSTTACTICAL.COM
the Mission
THE MISSION
MISSIONFIRSTTACTICAL.COM
3
contents
contents battle li n k ™
StockS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 REAC T ™
vertical grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ENGAG E ™
PISTOL GRIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 TORC H ™
light/laser mounts . . . . . . . . . . . . . . . . . . . . 20 E-VOLVE ™ ( E 2 )
attachments . . . . . . . . . . . . . . . . . . . . . . . . . 24 tekko™
Picatinny Rail systems . . . . . . . . . . . . MFT
sights . . . . . . . . . . . . . . . . . . . . . . . . . . . MFT
magazines. . . . . . . . . . . . . . . . . . . . . 38 MFT
classic . . . . . . . . . . . . . . . . . . . . . . 42 MFT
lifestyle . . . . . . . . . . . . . . . . . . 48 4
MISSIONFIRSTTACTICAL.COM
30
36
k eymo d™
39
34
37
the new standard in modularity • Round recoil feature works in all axis, tapered fit of KeyMod™ nut ensures fore/aft tension bias. • Tapered/chamfered surfaces act to place load on part to ensure that there is no slip under recoil and part will return to the same position (V-Block design) each time it is installed. Without these tampered/chamfered surfaces accessories will be much more prone to movement under recoil and counter recoil.
keymod rail system
magazine
backup sights
35
29
40
keymod qds mount
low pro gas block
magazine colored kit
• Chamfered and a controlled depth feature allows for mounting hardware to sit much lower profile inside the handguard, this allows running suppressors inside of handguards (where applicable) or accessories under the gas block on slim-fitting handguards. • The through-hole is sized to clear a sling swivel, this means that sling attachment points are as low-profile as possible. • Widespread adoption leading to a robust and growing accessory list from most every major tactical accessories manufacturer.
new for 2015
new products 2015
28
• Design is public domain. This was done on purpose so as to create a standard anyone is free to work with, just like the Picatinny (MIL-STD 1913) system. The free use of the standardized Picatinny system is what has allowed the small arms accessory market to expand to produce much effective tools. Any means and methods of attachment not yet patented are free for anyone to develop without potential royalties.
charging handle latch
Keep an eye out for the “Currently In Development” badge, showcasing new and innovative Mission First Tactical products, proudly MADE IN THE U.SA.
MISSIONFIRSTTACTICAL.COM
5
BattleLink
bat t lelin k ™
StockS
BATTLELINK™ Stocks are the evolution of battlefield technology manufactured using a specially developed reinforced, super tough polyamide from DuPont’s Military Plastic Division. Putting the stock to your shoulder is the foundation of any stock. Holding true to the basics while adding functionality. Beginning to end, success of the Mission is what every brave individual operating in harm’s way, strives for. Mission First Tactical develops evolutionary rifle/carbine accessories reducing Operator strain and fatigue, increasing effectiveness, target acquisition and accurate shot sequences. MADE IN THE USA.
COLOR OPTIONS:
Camo Grey 36170
6
04 MISSIONFIRSTTACTICAL.COM
Foliage Green 34160
Flat Dark Earth 20270
Scorched Dark Earth
bat t l e l i n k ™
minimalist stock With heavy input from operators from all spectrums we saw the need to make a stock that offers all of the functional requirements while keeping the weight under 6 ounces. This stock adapts and changes to your environment or operational needs by utilizing custom accessory mounts and is able to accept a new optimized sling configuration. This ultimately makes our stock the lightest in today’s AR accessories market. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Slide-on replacement for original collapsible
• Quick Detach Sling mounting point is positioned for
• Angled non-slip rubberized buttpad allows faster
• Upper section provides enhanced cheek weld • Available in MIL SPEC (BMSMIL)
butt stock
presentation, even with body armor
tech specs
Weight: 5.8oz
Height: 5.223”
Width: 1.752”
optimum usage including ambidextrous shooters
Length: 7.084”
bat t l e l i n k ™
minimalist stock w/ nrat strap Approximately 8 feet of Paracord braided in a regular weave directly onto a Battlelink™ Minimalist Stock adding only a half an ounce to the weight. The strap will not interfere with the use of the QD mount or it’s benefit to ambidextrous shooters. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Slide-on replacement for original collapsible
• Quick Detach Sling mounting point is positioned for
• Angled non-slip rubberized buttpad allows faster
• Upper section provides enhanced cheek weld • Available in MIL SPEC (BMSMIL)
butt stock
presentation, even with body armor
tech specs
Weight: 6.3oz
Height: 5.223”
Width: 1.752”
optimum usage including ambidextrous shooters
Length: 7.084” MISSIONFIRSTTACTICAL.COM
7
bat t l e l i nk ™
minimalist stock This stock adapts and changes to your environment or operational needs, from storing additional items to utilizing custom accessory mounts, and is able to accept any type of sling configuration. There are three sling slot options and two quick detach mounts, forward and rear, and the cage offers multiple hand hold options. MFT’s accessories can easily be mounted utilizing the sling slots and accessory rails, this includes Garmin 401 Mounts or an adjustable cheek piece. Taken as a whole, this makes our stock superior in today’s AR accessories market. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Slide-on replacement for original collapsible butt stock • Angled non-slip buttpad allows faster presentation, even with body armor
• Pivoting rear accessed large and water resistant storage compartment
• Customizable foam storage block with quick access tab diminishes rattle
• Quick Detach Sling mounting points (2) are positioned for optimum usage
• Upper section provides enhanced cheek weld • Accessory mounting provisions • Available with tube assembly (BUST) (Kit Includes: 6 position buffer tube; Spring; Buffer; Lock ring; Latch Plate)
• Available in MIL SPEC (BUSMIL)
tech specs
Weight: 9.01oz
Height: 5.224”
Width: 1.752”
Length: 7.345”
tech specs
Weight: 8.75oz
Height: 5.224”
Width: 1.752”
Length: 7.345”
bat t l e l i nk ™
low profile stock This stock adapts and changes to your environment or operational needs, from storing additional items to utilizing custom accessory mounts, and is able to accept any type of sling configuration. There is one sling slot option and two quick detach mounts, forward and rear. MFT’s accessories can easily be mounted utilizing the sling slots and accessory rails, this includes Garmin 401 Mounts or an adjustable cheek piece. Taken as a whole, this makes our stock superior in today’s AR accessories market. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Slide-on replacement for original collapsible butt stock • Angled non-slip buttpad allows faster presentation, even with body armor
• Pivoting rear accessed large and water resistant storage compartment
• Customizable foam storage block with quick access tab diminishes rattle
• Upper section provides enhanced cheek weld • Accessory mounting provisions • Available with commercial tube assembly
(BUST) (Kit Includes: 6 position buffer tube; Spring; Buffer; Lock ring; Latch Plate)
• Available in MIL SPEC (BULSMIL)
• Quick Detach Sling mounting points (2) are positioned for optimum usage
8
MISSIONFIRSTTACTICAL.COM
bat t l e l i n k ™
401gps upper mount The BATTLELINK™ 401 Upper Mount (B401UM) mounts to MFT’s Battlelink Stock Series. This mount provides operators the ability to utilize their Garmin 401 to visualize location, positioning, and rally points in “real time” presentation while maintaining weapon retention. Operators’ hands maintain position with weapon retained in the direction of threat while accessing the GPS. Securely mounted to the stock decreasing the chances of loosing valuable battlefield location data and is one less piece of equipment to keep track of. The 401 will be much easier to monitor because it’s attached to a larger serialized controlled item, the weapon. Two (2) tool-less stainless steel mounting screws allow the operator to quickly and easily access the batteries or remove the 401 while in the field. Garmin supplied Philips head screws can be utilized, design allows for ambidextrous mounting options. Manufactured out of 6061 T651 aluminum, the kit includes two stainless steel toolless 401 mounting screws and a foam pad that eliminates all undesirable rattle. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
tech specs
Weight: 0.56oz
Height: 1.647”
Width: 2.373”
Length: 0.750”
• Designed for use with the Garmin 401 • Ambidextrous Mounting Option
• Designed for use with Battlelink™ Stock Series
bat t l e l i n k ™
401gps lower mount The BATTLELINK™ 401 Lower Mount (B401LM) mounts to MFT’s Battlelink Utility Stock (BUS). This mount provides operators the ability to utilize their Garmin 401 to visualize location, positioning, and rally points in “real time” presentation while maintaining weapon retention. Operators hands maintain position with weapon retained in the direction of threat while accessing the GPS. Securely mounted to the stock decreasing the chances of loosing valuable battlefield location data and is one less piece of equipment to keep track of. The 401 will be much easier to monitor because it’s attached to a larger serialized controlled item, the weapon. Two (2) toolless stainless steel mounting screws allow the operator to quickly and easily access the batteries or remove the 401 while in the field. Garmin supplied Philips head screws can be utilized, design allows for ambidextrous mounting options. Manufactured out of 6061 T651 aluminum, the kit includes two stainless steel toolless 401 mounting screws and a foam pad that eliminates all undesirable rattle. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
tech specs
Weight: 0.16oz
Height: 1.601”
Width: 0.711”
Length: 0.750”
• Designed for use with the Garmin 401 • Ambidextrous Mounting Option • Designed for use with Battlelink™ Utility Stock Series MISSIONFIRSTTACTICAL.COM
9
bat t l e l i nk ™
adjustable cheek piece The BATTLELINK™ Adjustable Cheek Piece (BACP) is the solution to varying heights of mounted optics and proper eye alignment. When used in conjunction with the MFT Battlelink™ Utility Stock series of collapsible stocks, the BACP easily and quickly adjusts to provide the user with optimal eye-to-optic focus and a strong cheek weld contact position. While minimizing muscle and eye strain, the BACP allows the full usage of the charging handle due to the built-in limiting stop that insures interference-free operation of the rifle. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Stable shooting platform with 1.25 inches of travel • Charging handle can be operated with cheek piece
• Designed for use with BATTLELINK™ Utility Stock Series
in any position other than indicated by stop
tech specs
10
MISSIONFIRSTTACTICAL.COM
Weight: 2.72oz
Height: 4.069”
Width: 2.190”
Length: 5.546”
MISSIONFIRSTTACTICAL.COM
09 11
react
react ™
vertical grips The REACT™ vertical grip series is the next generation of forward grip technology, aiding in faster target acquisition, accuracy and reduced fatigue. Designed with storage for use with 1913 Picatinny Rail and NATO STANAG 4694. MADE IN THE USA.
COLOR OPTIONS:
Camo Grey Mil Spec Pantone 36170
12
04 MISSIONFIRSTTACTICAL.COM
Foliage Green Mil Spec Pantone 34160
Flat Dark Earth Mil Spec Pantone 20270
Scorched Dark Earth
r eact ™
re ac t ™
The REACT™ Short Grip (RSG) is a compact textured vertical grip designed to minimize material and dimension while maximizing functionality and providing a positive grip surface with wet or gloved hands. This grip allows the support hand to apply rearward pressure keeping the weapon shouldered, yielding better muzzle control and accuracy. If your objective is lightweight simplicity, this is the grip you want. MADE IN USA with a LIFETIME WARRANTY.
The REACT™ Folding Grip (RFG) is a compact textured vertical grip designed to deploy in either a vertical or horizontal position and provides a positive grip surface with wet or gloved hands. This grip allows the support hand to apply rearward pressure keeping the weapon shouldered, yielding better muzzle control and accuracy. The ideal grip if your objective is low viz operations, easy storage, and/or use of a bipod without interference. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
KEY FEATURES:
short grip
folding grip
• Secure water resistant plugged battery or part
• Flat non-slip bottom surface aids in supported
• Allows deployment in either vertical or horizontal
• Flat non-slip bottom surface aids in supported
• Customizable storage system with quick access
• International shipments DO NOT require an
• Push button allows easy selection of position • Secure water resistant storage compartment • Customizable storage system with quick access
• International shipments DO NOT require an
storage
tab diminishes rattle
tech specs
Weight: 2.0oz
firing positions
Height: 3.960”
export license, this item ships freely Width: 1.381”
Length: 2.205”
position
firing positions
export license, this item ships freely
tab diminishes rattle
tech specs
Weight: 3.73oz
Height: 4.314”
Width: 1.524”
Length: 2.205”
MISSIONFIRSTTACTICAL.COM
13
r e act ™
re ac t ™
The REACT™ Full-size Grip (REG) is a full fist-sized textured vertical grip with finger swells designed to provide a positive grip surface with wet, gloved or large hands. This grip allows the support hand to apply rearward pressure to keep the weapon shouldered to enhance muzzle control and accuracy. This is the grip you want if your objective is maximum grip and control. MADE IN USA with a LIFETIME WARRANTY.
• Customizable storage system with quick access
The REACT™ Magwell Grip (RMG) is a compact textured vertical grip designed for close handhold application at the low ready or CQB situations. Designed to provide a positive grip surface with wet or gloved hands. Locates support hand forward of the magazine well to prevent injury should an overcharged round cause the ejection of the magazine. This grip also incorporates right and left handed pressure pad wells for wired switches and a spare battery storage compartment. This grip allows the support hand to apply rearward pressure keeping the weapon shouldered, yielding better muzzle control and accuracy. This is the grip you want if your objective is a close hold grip with added safety. MADE IN USA with a LIFETIME WARRANTY.
• Flat non-slip bottom surface aids in supported
KEY FEATURES:
• International shipments DO NOT require an
• Allows mid-point balance and less effort to direct
full size grip
magwell grip
KEY FEATURES:
• Full-size vertical grip • Contoured finger swells allow a firm grip even with gloved hands
• Secure water resistant storage compartment
tab diminishes rattle firing positions
export license, this item ships freely
tech specs
Weight: 2.0oz
Height: 3.960”
Width: 1.381”
Length: 2.205”
muzzle
• Pressure pad wells are designed for Surefire™ ST Switch and allow accessory activation for both RH and LH Operators
tech specs
14
MISSIONFIRSTTACTICAL.COM
Weight: 3.73oz
• Secure water resistant storage compartment • Will not interfere with magazine • Designed for M16/M4/AR15/HK416
Height: 4.314”
Width: 1.524”
Length: 2.205”
r eact ™
re ac t ™
The REACT™ Quick Detach Grip (RQDG) is a full fist-sized textured vertical grip designed to quickly detach or attach without the use of tools and provides a positive grip surface with wet or gloved hands. This grip allows the support hand to apply rearward pressure keeping the weapon shouldered, yielding better muzzle control and accuracy. This is the grip you want if your objective is to have the ability to quickly and toollessly rearrange your vertical grip setup. MADE IN USA with a LIFETIME WARRANTY.
The REACT™ Torch Grip (RTG) is a combination compact textured vertical grip and illumination mount. Designed to utilize the use of a .75, .825, or 1” diameter flashlight/ laser and provide a positive grip surface with wet or gloved hands, and allow the support hand to apply rearward pressure keeping the weapon shouldered, yielding better muzzle control and accuracy. This is the grip you want if your objective is a vertical grip that will mount a large variety of flashlights/lasers. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
KEY FEATURES:
quick detach grip
• Quick detach vertical grip • Grooved gripping surfaces to eliminate hand
torch grip
• International shipments DO NOT require an export license, this item ships freely
slippage
• Secure water resistant storage compartment tech specs
Weight: 2.0oz
Height: 3.960”
• Combination vertical grip and illumination mount • Accepts light sources of .75, .825”, 1” diameter • Lock-out switch prevents unintentional activation of light source
• Grooved gripping surfaces to eliminate hand Width: 1.381”
Length: 2.205”
slippage
• Pressure pad well is designed for Surefire™ ST
Switch and allow accessory activation for both RH and LH Operators
tech specs
Weight: 7.4oz
• Thumb activation switch for wireless light activation
• Secure water resistant storage compartment • Customizable storage system with quick access tab diminishes rattle
• Flat non-slip bottom surface aids in supported firing positions
• International shipments DO NOT require an
Height: 4.727”
export license, this item ships freely Width: 1.573”
Length: 4.833”
MISSIONFIRSTTACTICAL.COM
15
engage
engage™
pistol grips The ENGAGE™ tactical pistol grip series provides a combination of fit and function unparalleled by the originally supplied M16/ AR15/M4/HK416/AK47 pistol grip. MADE IN THE USA.
COLOR OPTIONS:
Camo Grey Mil Spec Pantone 36170
16
04 MISSIONFIRSTTACTICAL.COM
Foliage Green Mil Spec Pantone 34160
Flat Dark Earth Mil Spec Pantone 20270
Scorched Dark Earth
engage ™
e n gag e ™
The ENGAGE™ tactical pistol grip (EPG16) provides a combination of fit and function unparalleled by the originally supplied M16/AR15/M4/HK416 pistol grip. The finger swells are textured and the grooved backstraps provide a positive grip surface with wet or gloved hands. There is a secure watertight storage compartment with plug retention for one-handed storage access. A customizable storage sled with quick access tab diminishes all rattle. MADE IN USA with a LIFETIME WARRANTY.
The ENGAGE™ tactical pistol grip (EPG47) provides a combination of fit and function unequaled by the originally supplied AK47 pistol grip. Textured finger swells and a grooved backstrap provide a positive grip surface with wet or gloved hands. There is a secure watertight storage compartment with plug retention for one-handed storage access. A customizable storage sled with quick access tab diminishes all rattle. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
KEY FEATURES:
ar15/m4 tactical pistol grip
• Designed for M16/M4/AR15/HK416 • Covers the receiver gaps that cause discomfort during sustained usage
• Finger swells and a grooved backstrap provide a
• Secure water resistant storage compartment • Plug retention for one handed storage access • Customizable storage system with quick access
non-slip grip
tech specs
Weight: 2.4oz
ak47 tactical pistol grip
Height: 4.804”
tab diminishes rattle
Width: 1.220”
• Designed for AK47 • Full-size pistol grip replaces thinner original for a
non-slip grip
• Grip angle replicates M16 while not affecting
• Secure water resistant storage compartment • Customizable storage system with quick access
• Plug retention for one handed storage access
• 922R compliant
full-fisted hold
trigger contact
Length: 3.420”
• Finger swells and a grooved backstrap provide a
tech specs
Weight: 2.2oz
tab diminishes rattle
Height: 4.048”
Width: 1.220”
Length: 3.223”
MISSIONFIRSTTACTICAL.COM
17
e n gag e ™
e n gag e ™
The ENGAGE™ tactical pistol grip with interchangeable front and back straps (EPGI16) provides a combination of fit and function unequaled by the originally supplied M16/ AR15/M4/HK416 pistol grip. Textured finger swells (3) and back straps (3) allow the user to custom fit the grip to their own hand size and comfort. A secure watertight storage compartment with customizable storage sled and a quick access tab diminishes all rattle. MADE IN USA with a LIFETIME WARRANTY.
The ENGAGE™ tactical pistol grip with interchangeable front and back straps (EPGI47) provides a combination of fit and function unequaled by the originally supplied AK47 pistol grip. The grip angle replicates that of the M16, but does not affect the grip-to-trigger dimension. Textured finger swells (3) and back straps (3) allow the user to custom fit the grip to their own hand size and comfort. A secure watertight storage compartment with customizable storage sled with quick access tab diminishes all rattle. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
KEY FEATURES:
ar15/m4 interchangeable pistol grip
• Designed for M16/M4/AR15/HK416 • Any combination of interchangeable back straps and finger swells allow for a custom fit for any sized hand
• Secure water resistant storage compartment • Customizable storage system with quick access tab diminishes rattle
• Covers the receiver gaps that cause discomfort
18
Weight: 3.7oz
Height: 4.847”
MISSIONFIRSTTACTICAL.COM
• Designed for AK47 • Any combination of interchangeable back straps and finger swells allow for a custom fit for any sized hand
• Grip angle replicates M16 while not affecting
during sustained usage
tech specs
AK47 interchangeable pistol grip
• Secure water resistant storage compartment • Customizable storage system with quick access tab diminishes rattle
• 922R compliant
trigger contact
Width: 1.220”
Length: 3.196”
tech specs
Weight: 3.5oz
Height: 4.091”
Width: 1.220”
Length: 2.999”
MISSIONFIRSTTACTICAL.COM
19
torch
to rch ™
light/laser mounts TORCH™ mounts maximize mounting options for illumination devices and lasers, while providing a minimal profile. MADE IN THE USA.
COLOR OPTIONS:
Camo Grey Mil Spec Pantone 36170
20
04 MISSIONFIRSTTACTICAL.COM
Foliage Green Mil Spec Pantone 34160
Flat Dark Earth Mil Spec Pantone 20270
Scorched Dark Earth
to r ch ™
to rc h™
The TORCH™ Standard Mount (TSM) accepts a 3/4, .825 or 1” illumination device. Two large purchase pads allow for tool free quick mounting or reconfiguration on a Picatinny Rail. This is the illumination mount you want if your objective is versatility for use with multi-size lights, ease of movement, speed of reconfiguration, and the lowest profile possible. MADE IN USA with a LIFETIME WARRANTY.
The TORCH™ Backup Light is a low profile, Picatinny mounted, pressure pad activated light ideal for home protection or as backup to a primary illumination source. Low output illumination for signature reduction during patrol, stealth structure search, approach to target, and breaching operations. 10-year storage lifespan, 12-hour burn time, 20-lumen output and weighing just 22 grams. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
KEY FEATURES:
standard mount
backup light
• Quick detach mount for illumination source
• Accommodates .75” - .825” - 1” diameter
• Power button can be set to momentary or
• Large purchase pad for quick release
• International shipments DO NOT require an
• Set screw for Picatinny Rail mounting • Battery door opens with quarter-turn
or lasers
tech specs
Weight: 2.0oz
light/laser
export license, this item ships freely
Height: 3.960”
Width: 1.381”
constant on
Length: 2.205”
tech specs
Weight: .8oz
• Primary LED • Low-output LED • TBLW-White /White LED • TBLWR- White /Red LED • TBLIR - IR/Red LED
Height: .665”
Width: 1.482”
Length: 2.220”
MISSIONFIRSTTACTICAL.COM
21
to rc h™
MFT TAR TL5 PRO PERSONAL MARKER Mission First Tactical is known for it’s evolutionary and advanced design.
KEY FEATURES:
• Invisibility: Unlike it’s competitors the TL5 MFT proudly introduces the TAR TL5 Pro. Designed for and deployed to Israeli forces the TL5 Pro meets the highest of needs and standards for field use.
Pro IR mode is completely invisible to the naked eye
• The universal clip allows the operator to change
• The Marker can be attached to the soldier’s side
the position in addition to checking/changing the battery without removing the helmet or putting the operator at risk
helmet with a universal clip
Lives are protected by the choice of Visible Constant Light, IR Constant Light, Visible Beacon Flickering Light (white/Blue/Red) IR Beacon Flickering Light & Flashlight Mode – all in 4 varying intensities.
• The personal universal clip allows the Marker to
Powered by one CR123 or AA battery. Multiple helmet mounts and MOLLE mount included. MADE IN USA with a LIFETIME WARRANTY.
tech specs
be transfered to the weapon, vest, equipment bag, etc. Weight: 3.8oz
Height: 1.825”
Width: 2.678”
Length: 3.370”
color options:
Fluorescent Yellow* *Available on quantity runs
22
MISSIONFIRSTTACTICAL.COM
White*
Scorched Dark Earth
Foliage Green Mil Spec Pantone 34160
MISSIONFIRSTTACTICAL.COM
23
evolve
e-vo lv™
attachments The E-VOLV™ (E2) equipment series is the next generation of enhancements for original equipment, all battle tested in the harshest conditions. MADE IN THE USA.
COLOR OPTIONS:
Camo Grey Mil Spec Pantone 36170
24
04 MISSIONFIRSTTACTICAL.COM
Foliage Green Mil Spec Pantone 34160
Flat Dark Earth Mil Spec Pantone 20270
Scorched Dark Earth
e -vo lv™
battle stock attachment The E-VOLV™ (E2) Battle Stock Attachment (E2BSA) securely mounts to the standard collapsible stock with no modifications. The E2BSA provides a comfortable surface that allows an enhanced cheek weld and allows both standard and quick-detach sling mounting options. In addition, two watertight compartments provide silent and cushioned battery storage that eliminates the possibility of contact resulting in discharged batteries. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Easily affixes to collapsible buttstock (may not work
• Two watertight storage compartments that separate
• Upper section provides enhanced cheek weld
• Quick Detach Sling mounting point and sling slot
with non-standard models)
tech specs
Weight: 4.96oz
Height: 3.193”
Width: 3.465”
batteries to prevent charge offs and reduce rattle
Length: 5.915”
e -vo lv™
2.2” Picatinny Rail The E-VOLV™ (E2) E2PR2 Picatinny Rail is a Mil-Std 1913 rail attachment measuring just over 2 inches and manufactured using a specially developed reinforced, super-tough polyamide from DuPont’s Military Plastic Division. It can be mounted to either standard or Glacier Guard handguards through the existing vent openings utilizing the included hardware. The rail is dimensioned to insure mounting is parallel to the bore/barrel for ballistic alignment. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• For standard and thickened heat shield • Compensated design allows for true alignment with barrel/bore
tech specs
Weight: 0.32oz
Height: 0.574”
Width: .752”
Length: 2.216” MISSIONFIRSTTACTICAL.COM
25
26
MISSIONFIRSTTACTICAL.COM
MISSIONFIRSTTACTICAL.COM
27
e -volv ™
e -vo lv™
The E-VOLV™ Oversized Charging Handle Latch is designed for use with the AR15, M4 and M16. The E2OCHL replaces the standard charging handle latch in minutes. The oversized latch allows for easy manipulation of the charging handle especially with gloved hands. MADE IN USA with a LIFETIME WARRANTY.
The E-VOLV™ Low Profile Charging Handle Latch is designed for use with the AR15, M4 and M16. The E2LPCHL replaces the standard charging handle latch in minutes. The low profile latch allows for easy manipulation of the charging handle with either hand. MADE IN USA with a LIFETIME WARRANTY.
*Charging handle not included
*Charging handle not included
KEY FEATURES:
KEY FEATURES:
• Oversized charging handle latch • Replaces the standard charging handle latch • Provides positive manipulation of the charging handle
• Low Profile charging handle latch • Replaces the standard charging handle latch • Provides positive manipulation of the charging handle with either hand
tech specs
tech specs
ar15 oversized charging handle latch
28
N/A
MISSIONFIRSTTACTICAL.COM
ar15 low profile charging handle latch
N/A
e-vo lv™
low profile gas block The E-VOLV™ Low Profile Gas Block was designed for use with the AR15, M4 and M16. The E2LPGB is 1 inch long, constructed out of steel with a Manganese phosphate finish. Fits .750 barrels and mounts utilizing knurled cup pin steel set screws. Allows usage with handguard systems that extend past the standard gas port location on the barrel. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Fits .750 barrels • Steel with a Manganese phosphate finish • Mounts utilizing knurled cup pin steel set screws • One inch (1”) tech specs
N/A
MISSIONFIRSTTACTICAL.COM
29 24
tekko
t ekko™
picatinny rail systems TEKKO™ Picatinny Rail systems allow customized mounting options for mission specific accessories not possible with original handguards, whether for AK47 or AR15. An evolution in battlefield technology manufactured using a specially developed reinforced, super tough polyamide from DuPont’s Military Plastic Division or hard coat anodized 6061 Aluminum. MADE IN THE USA.
COLOR OPTIONS:
Camo Grey Mil Spec Pantone 36170
30
04 MISSIONFIRSTTACTICAL.COM
Foliage Green Mil Spec Pantone 34160
Flat Dark Earth Mil Spec Pantone 20270
Scorched Dark Earth
t e k ko™
AK47 INTEGRATED RAIL SYSTEM The TP47IRS is an integrated rail system that replaces the original handguards on the AK47 family of rifles. The lower section of the handguard is installed in the same manner as the original part, while the upper section is easily attached using the included (4) bolts. When installed the TP47IRS insures a stable, rattle-free platform that will not alter the zero capability of the optics chosen. Four MIL STD 1913 Picatinny Rails, two full-length upper/lower and two side rails at just over 2 inches, offer options for mounting Picatinny accessories such as optics, lights/lasers, vertical forward grips, bipods and other rail mounted equipment. The two smaller side rails are easily removed should usage be not be required. The included rail cover can be attached to the lower rail to maintain the original design profile. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Rigid polymer construction of this two piece handguard provides a lightweight alternative
• Two full-length Picatinny Rails, upper and lower, allow individualized accessory mounting options
• Two smaller side-mounted Picatinny Rails are ideal for light/laser mounting and will not hinder natural grip
tech specs
Weight: 9.7oz
Height: 3.322”
Width: 2.451”
• Simplified installation and unique attachment ensure a mounting system that will hold zero during extreme usage
• Lower Picatinny Rail cover offers original AK47 profile
• 922R compliant
Length: 6.396”
t e k ko™
AK47 lower INTEGRATED RAIL SYSTEM The TP47LIRS is an integrated rail system that replaces the original lower handguard on the AK47 family of rifles. The lower section of the handguard is installed in the same manner as the original part. 3 MIL STD 1913 Picatinny Rails, one full-length lower and two side rails at just over 2 inches, offer options for mounting Picatinny accessories such as lights/lasers, vertical forward grips, bipods and other rail mounted equipment. The two smaller side rails are easily removed should usage be not be required. The included rail cover can be attached to the lower rail to maintain the original design profile. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Rigid polymer construction of this two piece handguard
• Lower Picatinny Rail cover offers original
• A full-length Picatinny lower rail allows individualized
• 922R compliant
provides a lightweight alternative accessory mounting options
AK47 profile
• Two smaller side-mounted Picatinny Rails are ideal for tech specs
Weight: 5.4oz
Height: 1.969”
Width: 2.451”
Length: 6.396”
light/laser mounting and will not hinder natural grip
MISSIONFIRSTTACTICAL.COM
31
T E K KO™
drop in INTEGRATED RAIL SYSTEM The Tekko Metal AR Rail System replaces the plastic factory handguard in minutes and requires no gunsmithing or special installation tools. Drop in, screwless, installation means no permanent alterations need be made to the rifle. The unit is held in place by the Delta ring and handguard cap. Four MIL-STD Picatinny Rails provides secure mounting for MIL-STD 1913 Picatinny Rail attachments and accessories such as vertical grips, lights, lasers, bipods and other rail mounted kit. Monolithic style continuous top rail eliminates the gap between the receiver and rail. There are four QD mounts, two on each side for push button sling swivels. Lightweight 6061 aluminum construction is Type 3 hard coat anodized. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
midlength
• No gunsmithing, drop in screwless installation, held in
• 4 QD mounts, two on each side for push button sling
• 4 MIL-STD 1913 Picatinny Rails provide a secure
• Monolithic style continuous top rail • Lightweight 6061 aluminum construction is hard coat
place by Delta ring and handgaurd cap with no permanent alterations to rifle platform for mounting Picatinny accessories
swivels
anodized
carbine
tmarcirs tmarmirs
Weight: 12oz
Height: 2.42”
Width: 2.29”
Length: 7.25”
Weight: 15.5oz
Height: 2.42”
Width: 2.29”
Length: 9.25”
tech specs
N/A
T E K KO™
7” drop in keymod rail system The Tekko Metal AR Carbine KeyMod™ Rail System (TMARCKRS) replaces the carbine 7” plastic factory handguard in minutes and requires no gunsmithing or special installation tools. Drop in, screwless, installation means no permanent alterations need be made to the rifle. The unit is held in place by the Delta ring and handguard cap. KeyMod™ attachment system provides secure mounting for MIL-STD 1913 Picatinny Rail attachments and accessories such as vertical grips, lights, lasers, bipods and other rail mounted kit. KeyMod™ system allows for universal modularity between numerous manufacturers of accessories, and accessory rails. 7” lightweight 6061 aluminum construction is Type 3 hard coat anodized. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Carbine handguard replacement (7”) • No gunsmithing • Drop in screwless installation • KeyMod™ The New Standard in Modularity 32
MISSIONFIRSTTACTICAL.COM
• Secure platform for mounting Picatinny Rails and accessories
• Lightweight 6061 aluminum construction is Type 3 hard coat anodized
T E K KO™
7” FREE FLOAT 2 PIECE INTEGRATED RAIL SYSTEM The TEKKO™ Metal AR15 Carbine 7” Free Float 2 Piece Integrated Rail System (TMARCFF27IRS) replaces the plastic factory handguard in minutes and requires no gunsmithing, removal of Delta Ring is required. Four MIL-STD 1913 Picatinny Rails provide a secure platform for mounting Picatinny accessories such as vertical grips, lights, lasers, bipods and other rail mounted kit. A monolithic style continuous top rail eliminates the gap between the receiver and rail. There are four QD mounts, two on each side for push button sling swivels. The 7” lightweight 6061 aluminum construction is hard coat anodized. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Quick Installation, no gunsmithing, removal
• 4 QD mounts, two on each side for push button sling
• 4 MIL-STD 1913 Picatinny Rails provide a secure
• Lightweight 6061 aluminum construction is hard coat
of Delta Ring is required.
platform for mounting Picatinny accessories
swivels
anodized
• Monolithic style continuous top rail tech specs
Weight: 13oz
Height: 2.42”
Width: 2.29”
Length: 7.062”
t e k ko™
10” FREE FLOAT 2 PIECE INTEGRATED RAIL SYSTEM The TEKKO™ Metal AR15 Carbine 10” Free Float 2 Piece Integrated Rail System (TMARCFF210IRS) replaces the plastic factory handguard and requires no gunsmithing, removal of Delta Ring ,front sight post and installation of low profile gas block is required. Four MIL-STD 1913 Picatinny Rails provide a secure platform for mounting Picatinny accessories such as vertical grips, lights, lasers, bipods and other rail mounted kit. A monolithic style continuous top rail eliminates the gap between the receiver and rail. There are four QD mounts, two on each side for push button sling swivels. The 10” lightweight 6061 aluminum construction is hard coat anodized. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Quick Installation, no gunsmithing, removal
• 4 QD mounts, two on each side for push button sling
• 4 MIL-STD 1913 Picatinny Rails provide a secure
• Lightweight 6061 aluminum construction is hard coat
of Delta Ring is required.
platform for mounting Picatinny accessories
tech specs
Weight: 17oz
Height: 2.42”
Width: 2.29”
Length: 10.062”
swivels
anodized
• Monolithic style continuous top rail MISSIONFIRSTTACTICAL.COM
33
t e k ko™
Free float 7” keymod rail system The Tekko Metal AR Free Float 7” KeyMod™ Rail System (TMARFF7KRS) replaces the plastic factory handguard. KeyMod™ attachment system provides secure mounting for MIL-STD 1913 Picatinny Rails and accessories such as vertical grips, lights, lasers, bipods and other rail mounted kit. Will accommodate most suppressor installations. Patent pending mounting, indexing and lock up system. Larger range of modularity with offset mounting positions as well as the traditional 12, 3, 6 and 9:00 positions. Monolithic style top rail eliminates the gap between the receiver and rail. Minor assembly required, utilizes standard barrel nut and will accommodate a standard front sight post, low profile gas block or Picatinny Rail gas block. The KeyMod™ system allows for universal modularity between numerous manufacturers of accessories, and accessory rails. 7” lightweight 6061 aluminum construction is Type 3 hard coat anodized. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Carbine handguard replacement (7”) • Secure platform for mounting Picatinny Rails and accessories
• Monolithic style top rail • Allows most suppressor installations
• Lightweight 6061 aluminum construction is Type 3 hard coat anodized
• Removal of Delta ring and front sight post required. • KeyMod™ The New Standard in Modularity tech specs
N/A
tech specs
N/A
t e k ko™
Free float 13.5” keymod rail system The Tekko Metal AR Free Float 13.5” KeyMod™ Rail System (TMARFF13KRS) replaces the plastic factory handguard. KeyMod™ attachment system provides secure mounting for MIL-STD 1913 Picatinny Rails and accessories such as vertical grips, lights, lasers, bipods and other rail mounted kit. Will accommodate most suppressor installations. Patent pending mounting, indexing and lock up system. Larger range of modularity with offset mounting positions as well as the traditional 12, 3, 6 and 9:00 positions. Monolithic style top rail eliminates the gap between the receiver and rail. Minor assembly and low profile gas block required (MFT E2LPGB), utilizes standard barrel nut. The KeyMod™ system allows for universal modularity between numerous manufacturers of accessories, and accessory rails. 13.5” lightweight 6061 aluminum construction is Type 3 hard coat anodized. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Handguard is 13.5” in length • Secure platform for mounting Picatinny Rails and accessories
• Monolithic style top rail • Allows most suppressor installations 34
MISSIONFIRSTTACTICAL.COM
• Lightweight 6061 aluminum construction is Type 3 hard coat anodized
• Minor assembly required, removal of Delta ring and front sight post.
• KeyMod™ The New Standard in Modularity
T E K KO™
keymod 3” & 6” rails The Tekko Metal KeyMod™ 3” Rail (7 slot TMKMR3) and Tekko Metal KeyMod™ 6” Rail (12 slot TMKMR6) are a MIL-STD 1913 Picatinny Rail that will interface with any KeyMod™ mounting surface. Manufactured from lightweight, Type 3 hard coat anodized 6061 aluminum. Mounting hardware is stainless steel and features a snag resistant design with a self-contained assembly that eliminates the loss of mounting hardware. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• 3” (7 slot) MIL-STD 1913 Picatinny Rail for use with all
• Self-contained assembly eliminates the loss of mounting
• 6” (12 slot) MIL-STD 1913 Picatinny Rail for use with all
• Lightweight 6061 aluminum construction is Type 3 hard
• Secure platform for mounting Picatinny Rail accessories • Easy attachment and removal
• KeyMod™ The New Standard in Modularity
KeyMod™ systems KeyMod™ systems
3” SPECS 6” specs
N/A N/A
hardware
coat anodized
t e k ko™
keymod quick detach sling mount The Tekko Metal KeyMod™ QD Sling Mount (TMKMQDSM) interfaces with any KeyMod™ mounting surface. Designed for use with the standard push button, quick detach sling swivel. Low profile and snag resistant design requires 2 slots for mounting. Braked, 4 position (360°), non-rotating locking interface. Machined from lightweight, Type 3 hard coat anodized, 6061 aluminum. Mounting hardware is stainless steel and features a snag resistant design with a self-contained assembly that eliminates the loss of mounting hardware. MADE IN USA with a LIFETIME WARRANTY. *Quick detach sling swivel not included
KEY FEATURES:
• Designed for use with the standard push button, QD sling swivel
• Low profile and snag resistant design • Braked, 4-position (360°), non-rotating locking interface
tech specs
N/A
• Requires 2 Slots for mounting
• Interfaces with any KeyMod™ mounting surface • Self-contained assembly eliminates the loss of mounting hardware
• Lightweight 6061 aluminum construction is Type 3 hard coat anodized
• KeyMod™ The New Standard in Modularity MISSIONFIRSTTACTICAL.COM
35
sights
mft
sights Sighting solutions mount onto a 1913 Picatinny Rail, replacing the carry handle sight. Designed for AR-15 - M4 Flat Top configured rifles, will work with other similarly configured rifles. MADE IN THE USA.
COLOR OPTIONS:
Camo Grey Mil Spec Pantone 36170
36
MISSIONFIRSTTACTICAL.COM
Foliage Green Mil Spec Pantone 34160
Flat Dark Earth Mil Spec Pantone 20270
Scorched Dark Earth
mft si g h t s™
m f t s i g ht s ™
The Back Up Polymer Flip up Front Sight with standard iron sight elevation adjustment (BUPSWF) mounts onto a 1913 Picatinny Rail and accepts any standard front post blade. A standard front sight tool is required with each click equaling the standard 1/4 MOA. Unlike other backup sights MFT has developed a shroud that shelters the front post blade from debris and impact damage when not deployed. A slim profile allows the sight to sit under most optics. Manufactured using a specially developed reinforced, super tough polyamide from DuPont’s Military Plastic Division. MADE IN USA with a LIFETIME WARRANTY.
The Back Up Polymer Flip Up Rear Sight with Windage Adjustment (BUPSWR) mounts onto a 1913 Picatinny Rail. A flat head screw driver is required to adjust an Infinite MOA. Unlike other backup sights MFT has developed a shroud that shelters the aperture from debris and impact damage when not deployed. A slim profile allows the sight to sit under all current magnifiers and optics. Manufactured using a specially developed reinforced, super tough polyamide from DuPont’s Military Plastic Division. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
KEY FEATURES:
front back up polymer sight
rear back up polymer sight
• Full elevation adjustment, tool required • Low profile snag resistant design • Shroud protects front post blade from debris and
• Can fold to the rear, the correct direction if
• Accepts any standard front post blade
• International shipments DO NOT require an
impact damage
dropped
• Manufactured out of super tough polyamide from DuPont’s Military Plastic Division
export license, this item ships freely
• Low profile snag resistant design • Shroud protects aperture from debris and impact damage
• Dual peep, same plane aperture allows for perfect co-witness
• Unique closure with either aperture deployed • Can fold to the rear, the correct direction if
• Sight works in conjunction with all standard height front sights
• Manufactured out of super tough polyamide from DuPont’s Military Plastic Division
• International shipments DO NOT require an export license, this item ships freely
dropped
tech specs
Weight: .5 oz Height: .879” O.A. /.6” from top of Rail
Width: 1.08”
Length: 2.23”
tech specs
Weight: .5 oz Height: .879” O.A. /.6” from top of Rail
Width: 1.08”
Length: 2.23”
MISSIONFIRSTTACTICAL.COM
37
magazine
mft
magazines Magazines over engineered for today’s modern warrior, utilizing DuPont’s Military Plastic Division super-tough polyamide. MADE IN THE USA.
COLOR OPTIONS:
Camo Grey Mil Spec Pantone 36170
38
MISSIONFIRSTTACTICAL.COM
Foliage Green Mil Spec Pantone 34160
Flat Dark Earth Mil Spec Pantone 20270
Scorched Dark Earth
mft maga zi n es
standard capacity magazine The MFT Standard Capacity Polymer Magazine, is a 30 round 5.56 NATO magazine engineered as an enhancement of the standard STANAG design. The MFT stipple texture, low profile front ribs and flared floor plate aid in extraction and handling. The floor plate provides drop protection, has a paint pen dot matrix area for easy identification marking and is compatible with tight double and triple magazine pouches. Two fully functional drain holes ensure full and proper draining. Simple toolless disassembly with double floor plate safety release tabs allows user to safely release spring tension during disassembly and quick ammo dumps. Long-life stainless steel spring and four-way anti-tilt follower ensure reliable feeding. Oversized bolt catch notch in the rear of the magazine provides enhanced reliability of the bolt catch operation. Quality and consistency are ensured by using a specially developed, reinforced and super tough polyamide from DuPont’s Military Plastic Division. And as always our products are MADE IN THE USA with a LIFETIME WARRANTY.
KEY FEATURES:
• MADE IN THE USA • MFT stipple texture • Low profile ribs front texture • Flared floor plate • Paint Pen dot matrix on floor plate • Drain holes • Toolless disassembly with double floor plate safety release tabs • Quick ammo dump • Long-life stainless steel spring • Four-way anti-tilt follower • Oversized bolt catch tech specs
Weight: 3.8 oz
Height: .879”
Width: 1.125”
Length: 2.25”
MISSIONFIRSTTACTICAL.COM
39
m f t magaz i n es
10 round capacity magazine
m f t m aga z i n es
mag floor plate
The MFT 10 Round Polymer Magazine, is a 10 round 5.56 NATO magazine engineered as an enhancement of the standard STANAG design. A flared floor plate aid in extraction and handling. The floor plate provides drop protection, has a paint pen dot matrix area for easy identification marking and is compatible with tight double and triple magazine pouches. Two fully functional drain holes ensure full and proper draining. Simple toolless disassembly with double floor plate safety release tabs allows user to safely release spring tension during disassembly and quick ammo dumps. Long-life stainless steel spring and four-way anti-tilt follower ensure reliable feeding. Oversized bolt catch notch in the rear of the magazine provides enhanced reliability of the bolt catch operation. Quality and consistency are ensured by using a specially developed, reinforced and super tough polyamide from DuPont’s Military Plastic Division. MADE IN USA with a LIFETIME WARRANTY.
MFT Polymer Magazine Floor Plate is designed for use with the MFT’s SCPM556 and 10PM556 magazines. Set of 6, easily recognizable colors include Red, Orange, Yellow and Green. Great for 3 gun competitions, prepper storage and law enforcement officers. For anyone who uses more than one brand, bullet weight, or round count of ammunition and/ or multiple caliber rifles. Color is the simplest way to identify your magazines. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
• Paint Pen Dot Matrix • Flared Floor Plate • For use with MFT’s SCPM556 & 10PM556
KEY FEATURES:
• Toolless disassembly with double floor plate safety release tabs
• Paint Pen dot matrix on floor plate • Long-life stainless steel spring tech specs
40
Weight: 2.3 oz
• Four-way anti-tilt follower • Flared floor plate • Oversized bolt catch • Drain holes
Height: 3.66”
MISSIONFIRSTTACTICAL.COM
Width: 1.03”
Length: 2.70”
tech specs
N/A
MISSIONFIRSTTACTICAL.COM
41
classic
mft
classic™ The MFT Classic™ series features an assortment of accessories with at least a decade of combat proven performance and durability. Simple designs coupled with MFT’s new polymer blend, these classics will be around for a very long time. MADE IN THE USA.
COLOR OPTIONS:
Camo Grey Mil Spec Pantone 36170
42
04 MISSIONFIRSTTACTICAL.COM
Foliage Green Mil Spec Pantone 34160
Flat Dark Earth Mil Spec Pantone 20270
Scorched Dark Earth
mft cl assic™
m f t c l as s i c ™
The MFT Classic™ G27 Tactical Pistol Grip for M16/AR15/M4, replaces standard grip in minutes, increasing operator comfort and weapon performance. MADE IN USA with a LIFETIME WARRANTY.
The MFT Classic™ Quick Detach Vertical Grip attaches and detaches with the push of a button. Simply push and slide along rail to desired location. Incorporates a secured storage compartment for batteries or small items. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
KEY FEATURES:
ar15/m4 tactical pistol grip
• Increases operator comfort and weapon
performance, providing more control during firing while reducing fatigue
• Finger grooves, palm swell and contoured
• Textured surface area allows for a secure grip when in use or when wet
• Grip base offers an easily accessible secured
backstrap allow for a powerful grip
tech specs
Weight: 3.4oz
quick detach vertical grip
Height: 4.991”
storage compartment for a small cleaning kit or other items
Width: 1.302”
Length: 2.821”
• Quick push button detach • Simple installation • Easily accessible storage compartment for a
• International shipments DO NOT require an export license, this item ships freely
small cleaning kit or other items
tech specs
Weight: 3.4oz
Height: 4.5”
Width: 1.0”
Length: 2.69”
MISSIONFIRSTTACTICAL.COM
43
m f t cl assi c™
ar15/m4 magazine coupler
ak47 magazine coupler
The MFT Classic™ M16 magazine coupler (M16MC) joins two M16 style magazines, expanding ammunition capacity and allowing faster reload time. Patented. MADE IN USA with a LIFETIME WARRANTY.
The MFT Classic™ AK47 Magazine coupler expands ammunition capacity and saves precious reloading time by joining two magazines for the AK47. Will not scratch or deform magazines. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
KEY FEATURES:
• Fits .223, 5.56 NATO, AR15/M16, • Ruger Mini-14 and Magpul™ P-MAGS • Manufactured from high density polymer
tech specs
44
m f t c l as s i c ™
Weight: 1.4oz
• Will not scratch or deform magazines • International shipments DO NOT require an
Height: 2.25”
MISSIONFIRSTTACTICAL.COM
export license, this item ships freely
Width: 2.375”
Length: 3.0”
• Will not scratch or deform mags • Screw tightened
tech specs
Weight: 1.9oz
Height: 0.875”
Width: 2.25”
Length: 0.50”
mft cl assic™
universal equipment mount
m f t c l as s i c ™
one point sling mount
The MFT Classic™ Equipment Mount allows the operator to rapidly employ a bipod that has been previously attached. Quick detach push button allows for easy and fast attachment and removal. Mount on side of a Picatinny Rail for use as a side sling adapter. Constructed from high density polymer, Sling adapter constructed from steel. MADE IN USA with a LIFETIME WARRANTY.
The MFT Classic™ One Point Sling Mount (OPSM) is a single point sling mount for snap clips or conventional sling up to 1.25” webbing. No tube disassembly necessary; remove collapsible buttstock, slide on tube, position properly and secure. CNC machined from aviation grade aluminum with matte black finish. MADE IN USA with a LIFETIME WARRANTY.
*Bipod not included
KEY FEATURES:
KEY FEATURES:
• Rapidly employ previously attached bipod • Quick detach/attach push button
tech specs
Weight: 1.9oz
Height: 1.2”
• International shipments DO NOT require an export license, this item ships freely
Width: 1.341”
Length: 2.543”
• Single point mount • No tube disassembly required
tech specs
Weight: 0.8oz
• CNC machined from aviation grade aluminum with matte black finish.
Height: 2.11”
Width: 2.119”
Length: 0.678”
MISSIONFIRSTTACTICAL.COM
45
m f t cl assi c™
m f t c l as s i c ™
The MFT Classic™ M33 2 rail polymer two piece handguard provides a two sided Picatinny Rail system. Handguard can be mounted so the rails are in a horizontal or vertical position. Patented. MADE IN USA with a LIFETIME WARRANTY.
The MFT Classic™ M44S and M44L Polymer two-piece handguard provides a four sided Picatinny Rail system for AR15/M16/M4. Patented. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
KEY FEATURES:
• Screwless installation • Held in place by Delta ring and handguard cap • Rail covers included
• Screwless installation • Held in place by Delta ring and handguard cap • Thermal rail covers included
2 rail handguard
tech specs
46
Weight: 5.4oz
Height: 2.425”
MISSIONFIRSTTACTICAL.COM
Width: 2.19”
4 rail handguard
Length: 6.5”
• M44S is for 6” carbine handguard replacement • M44L is for 12” rifle handguard replacement
m44s specs
Weight: 7.4oz
Height: 2.25”
Width: 2.5”
Length: 6.5”
m44l specs
Weight: 13.6oz
Height: 2.39”
Width: 2.224”
Length: 12”
m f t c l as s i c ™
quick detach light mount
mft cl assic™
one point sling The MFT Classic™ one point sling (OPS1) is ideal for close quarters combat, allowing easy movement when operating inside confined spaces. Maintains its structure for easy donning. OPS1 has upgraded tubular webbing with fully-enclosed bungee portion, allowing for increased durability. MADE IN USA with a LIFETIME WARRANTY.
The MFT Classic™ FAS2/3 quick detach light mount quickly attaches/detaches to Picatinny Rail utilizing a one finger push button. Polymer light mount allows operator ready access to illumination source. MADE IN USA with a LIFETIME WARRANTY.
KEY FEATURES:
KEY FEATURES:
• Strong metal carabiner for easy attachment • Sling easily snaps onto many mounting locations • Fully adjustable sling fits all body sizes tech specs
Weight: 7.3oz
• Quick release side buckle • Constructed from 1.5” nylon web • High density bungee cord and carabiner are colored black
Height: 26.425”
Width: 2.137”
Length: 33.275”
• Quickly attaches/detaches to Picatinny Rail utilizing a one finger push button.
• International shipments DO NOT require an export license, this item ships freely
• Polymer light mount allows operator ready access to illumination source.
tech specs
Weight: 1.2oz
Height: 1.738”
Width: 1.29”
Length: 1.733”
MISSIONFIRSTTACTICAL.COM
47
lifestyle
mft
lifestyle Mission First Tactical Lifestyle apparel, patches and stickers . MADE IN THE USA (where possible).
48
04 MISSIONFIRSTTACTICAL.COM
m f t l i f es t y l e
stickers The Mission First Tactical stickers.
mft l i festyle
morale patches Mission First Tactical morale patches.
KEY FEATURES:
• Our sticker material is custom made to our high
• 10pt board backing to be precise. This is the
• Inks are typically at least 7-10 times thicker than
• 100% UV Protection, 3 passes of clear UV
standards.
other silkscreen printers and 10x-20x thicker than digitally printed stickers
average thickness of a postcard. protection
• Permanent Aggressive Adhesive MISSIONFIRSTTACTICAL.COM
49
m f t l i fest yl e
team shirts Mission First Tactical Lifestyle assorted team shirts.
KEY FEATURES:
• #5000 Gildan Heavyweight 100% Cotton • Colors: Black, White, OD Green and Navy 50
MISSIONFIRSTTACTICAL.COM
• Sizes: S, M, L, XL, XXL
MISSIONFIRSTTACTICAL.COM
51
missionfirsttactical.com 52
MISSIONFIRSTTACTICAL.COM