Gates Barricade from Speedflow

Page 1

Barricade Fuel Line Hose with GreenShield® Technology

August 2013 - Gates barricade hose F U E L I N J EFuel CTION AND CARBU RETION HOSE Injection Hose COVER: Outstanding ozone and heat resistance REINFORCEMENT: Textile spiral weave provides best-in-class working psi* ADHESION LAYER: Serves as a second defense against oil and aggressive fuels GREENSHIELD® BARRIER: Patent-pending thermoplastic material delivers the lowest permeation in the industry BARRIER TUBE: Fortified to resist high heat and aggressive fuels such as Ethanol

MODERN FUELS REQUIRE MODERN FUEL HOSE

Speedflow has a long relationship with the Gates Corporation in supplying the performance industry with their quality hoses to suit our range of fittings. We are excited to now stock the Gates premium range of Barricade fuel injection hose. Check out the information on this flyer about the outstanding performance of this standard replacement EFIaggressive fuel hose tofuel meet the demands of modern blends. Installing Barricade protects the system against the mixtures of today’s modernfuel fuels, which can degrade

MODERN FUELS REQUIRE MODERN FUEL HOSE.

basicBarricade rubber hose and result in customer Plus with Barricade, you can be assured that you complying with Installing protects the system against comebacks. the aggressive fuel mixtures of today’s modern fuels, which canare degrade basic rubber hose and result in customer comebacks. Plus with Barricade, you can be assured that you are complying with permeation laws, and providing your customers with the best hose available – permeation laws, and providing your customers with the best hose available – all while being environmentally-friendly. • • • •

all while being environmentally-friendly.

BEST-IN-CLASS working psi of 225 (for fuel injection) Lowest permeation rate on the market 1 gr/m2/day Exceeds California Air Resources Board ( CARB) and fuel EPA injection) requirement • BEST-IN-CLASS working psi of 225 (for Multi-fuel compatible: Approved for use with leaded and unleaded Gasoline, Diesel, Biodiesel†, E-85, 100% Methanol, ETHANOL and gasohol fuels rate on the market 1 gr/m2 /day • Lowest permeation Better for the Environment. Safer for You. • Performs 5x better for permeation than the nearest competitor Installing Barricade® solves two problems at once: compliance with CARB pollution standards, and protecting yourself from

Fuel Injection has a best-in-class working pressure of 225 psi † Biodiesel fuel must meet the ASTM D6751 specification for biodiesel fuel and be produced, marketed and distributed by BQ9000 accredited facilities. • *Barricade Exceeds California Air Resources Board (CARB) and EPA requirement liability for installing the wrong hose type. The first problem is fuel permeation. The California Air Resources Board (CARB)

Barricade Fuel Injection Hose GATES Barricade efi hose - Part and U. S. Environmental Protection Agency (EPA) standards stipulate the maximum allowable permeation rates for fuelNumbers hose.

• Fuel injection engines, fuel lines,for EEC/EGR, • Multi-fuel compatible: Approved use and Barricade exceeds these standards andwith does itleaded better than any other hose in the industry.

States that have adopted CARB standards

Size Per meter 25ft (7.62m) roll 250ft (76.2m) roll cars and light duty trucks † unleaded Gasoline, Diesel, Biodiesel , and E-85, Methanol, make fuel a mistake: infor CARB-regulated states, Most original equipment (OE) cars trucks100% have been using CARB-approved “low Don’t permeation” line hoses over • Air pump, PCV valve compatible with 1/4” G27330 G27339 G27344 20 years as a pollution-control device, and since 2007, small engine and off-highway equipment have as well. It is it is ILLEGAL to “alter the original design of the Gas/Diesel Ethanol ETHANOL and gasoholand fuels 5/16”hose in the 20 G27331 G27345 replace hose with conventional states that have adopted theG27340 CARBof standards. • PressureILLEGAL rating: to225 psi low-permeation (best-in-class) system.” Replacement OEM hose with general• Temperature: -40°F for to 257°F (-40°C than to 135°C) 3/8” G27332 purpose carburetion G27341 hose is considered anG27346 alteration. Performs 5x better permeation the nearest competitor Barricade not only beats the California Air Resources Board’s permeation requirements, continuous, up to 302°F (150°C) intermittent NOTE: DO NOT SUBMERSE IN FUEL

it performs five times better 1/2” than the nearest competitor. Available Soon in 1/2” I.D. Size

Please check for availability of sizes and lengths, as stock is not always available.

2 Permeation Rate (Grams/m One Gallon Two Tablespoons *Barricade Fuel Injection has a best-in-class working pressure of 225 psi †/day) Biodiesel fuel must meet the ASTM D6751 vs. specification for biodiesel fuel and be produced, marketed and distributed by BQ9000 accredited facilities.

15

10

5

0

Two feet of general-purpose hose permeates up to one gallon of hydrocarbon vapors into the atmosphere each year. Compare that

CARB

vs.

to only two tablespoons of permeation Lowest Competitor

with superior Barricade® Fuel Line Hose.

What’s in the tank? Because there are so many fuel blends available today, there is no way to know what mixture of fuel is in your What’s in the tank? Because there are so many fuel blends available today, there is no way to know what mixture of fuel customer’s tank at any given time. You can’t predict how quickly these aggressive fuels will degrade conventional hose, and cause a failure is in your customer’s tank at any given time. You can’t predict how quickly these aggressive fuels will degrade conventional that will bring your customer back to your shop. When you install Barricade Fuel Line Hose, you can be assured that you are complying hose, and cause a failure that will bring your customer back to your shop. When you install Barricade Fuel Line Hose, you can with the law, providing be your customers with the best product available, and protecting the system against aggressive fuel mixtures that can assured that you are complying with the law, providing your customers with the best product available, and protecting degrade the hose and result in customer comebacks. the system against aggressive fuel mixtures that can degrade the hose and result in customer comebacks. Speedflow products Pty Ltd · 3-5 Coolabah Drive, Taree, NSW 2430, Australia · Ph: 61 2 6552 6144 · Fax: 61 2 6551 0253 www.speedflow.com.au · email: products@speedflow.com.au


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.