SRM Engine Services 2022 Price List

ENGINE SERVICES 2022 PRICE LIST

SRM Engineering Unit 22, Glanyrafon Enterprise Park Aberystwyth, Ceredigion, SY23 3JQ 01970 627771 www.srmclassicbikes.com

ENGINE SERVICES 2022 PRICE LIST

ENGINE REBUILDS

This contains the prices for labour only (unless otherwise stated).

The total cost for a rebuild depends to a great degree on the condition of the engine and the new parts required, A full and complete estimate is given prior to each engine build commencing.

Price inc.VAT Strip/inspect & estimate cost of repairs to full £ 220.88 engine ENGINE REBUILDS LABOUR ONLY

Bottom end rebuild (twins) Bottom end rebuild (triples) Full Engine build A7/A10 & Huntmaster Full Engine build A50/A65 (Inc. gearbox & primary) Full Engine build Unit Triumph (Inc. gearbox & primary) Full Engine build Pre unit Triumph (engine only) Full Engine build BSA/Triumph TRIPLE Full Engine build Norton twin (engine only) Full Engine build B31/B33/Goldstar

£ 261.91 £ 389.97 £ 674.18 £ 905.52 £ 905.52 £ 674.18 £ 1191.96 £ 657.10 £ 657.10

www.srmclassicbikes.com

ENGINE SERVICES 2022 PRICE LIST

NEEDLE ROLLER BEARING CONVERSION ONLY

Needle roller bearing conversion A7/A10 All Models Needle roller bearing conversion A50/A65 1962-67 Needle roller bearing conversion A50/A65 1968-72 Needle roller bearing conversion 3TA & 5TA Needle roller bearing conversion ARIEL Huntmaster

Price inc.VAT £ 595.00 £ 595.00 £ 595.00 £ 595.00 £ 595.00

BSA ORIGINAL TIMING SIDE BUSH

A special SRM bush is fitted to the cases then accurately bored for the perfect clearance.

Supply & fit bush, jig bore to size (includes £ 64.97 bush) & shim crank CRANKSHAFT SERVICES

Dynamic balance crankshaft (twins) Dynamic balance crankshaft (triple) Crankshaft Crack tested Crank Regrind big end (each) Crank Regrind main journal (each) Strip & reassemble bolt together crank (labour) Polish to clean big end journal Sludge trap cleaned & re-assembled (labour) Crankshaft spline repair (BSA) Rotor keyway welded, ground & re-cut Crankshaft sleeved & ground on shafts

£ 145.35 £ 170.10 £ 69.61 £ 34.05 £ 42.47 £ 57.91 £ 17.39 £ 48.28 £ 198.29 £ 156.12 £ 115.97

www.srmclassicbikes.com

ENGINE SERVICES 2022 PRICE LIST

CONRODS SERVICES

As one of the most highly stressed items in the engine, we would advise replacing with new if possible.

Conrods highly polished (pair) Small end bushes fitted & honed (each / labour only) Small journal endcaps modified for later nuts (pair)

Price inc.VAT £ 102.07 £ 16.39 £ 14.58

CRANKCASE SERVICES

Drive side housing bearing insert Alloy welding repairs (from) Bead blast & clean crank case pair UNIT engine Bead blast & clean crank case pair pre-UNIT engine Bead blast & clean crank case pair Triple engine Setup & Bore crank case mouth for SRM 750barrel Machine cases for Belt drive pullet (A50/ A65) Convert barrel studs to 3/8" (A50/ A65) Crankcases jigged, faced top & bottom BSA cam bushes removed fitted & honed (labour) TRIUMPH cam bushes removed fitted & honed (labour) x4

£ 194.39 £ 31.19 £ 100.53 £ 85.06 £ 119.21 £ 57.91 £ 72.69 £ 41.56 £ 125.44 £ 77.88 £ 77.88

www.srmclassicbikes.com

ENGINE SERVICES 2022 PRICE LIST

CRANKCASE SERVICES (continued)

TRIUMPH cam bushes removed fitted & honed (labour) x2 BSA A17/A10 Primary top hat insert (labour) each Casing screw holes cleaned & re-tapped (labour per hour) Stud, Bolt & Bearing removal prior to machining (labour per hour)

Price inc.VAT £ 46.27 £ 11.40 £ 64.97 £ 64.97

TIMING COVER SERVICES

Polish timing covers (Pair BSA) Polish timing cover (TRIUMPH) Triumph outer cover bush to oil seal conversion BSA A7/A10 Idler bushed fitted & honed (labour only) BSA A50/A65 Idler bushed fitted & honed (labour only) BSA Idler housing bored o/s & bush fitted to suit (labour only) Modify A7/A10 outer cover for magneto rev drive (labour only) Test BSA oil pump on test rig

£ 69.61 £ 41.56 £ 48.54 £ 43.45 £ 41.56 £ 72.69 £ 72.69 £ 28.06

www.srmclassicbikes.com

ENGINE SERVICES 2022 PRICE LIST

CYLINDERS SERVICES

Re-bore with plateau hone finish (single) Re-bore with plateau hone finish (twin) Re-bore with plateau hone finish (triple) Re-bore with plateau hone finish (four) Bore Cylinder, fit liner, bore & hone to STD each (labour) Cylinder top face skimmed Damaged/ Broken fin repair (each) from Cylinders shot blasted & stove enamelled Bore oversize NORTON cam follow housings Cam followers refaced per set (A50/A65, T120/T149) Cam followers refaced per set (T150/T160/R3) Head bolt hole helicoiled (each) CYLINDER HEAD SERVICES

Valve seat cut multi-angle (per seat) Old guide removed, new fitted & honed each (labour only) Damaged/ Broken fin repair (each) from Skim head face Spark plug top hat thread insert fitted (includes insert)

Price inc.VAT £ 72.71 £ 92.53 £ 125.58 £ 152.02 £ 92.57 £ 54.00 £ 31.19 £ 107.88 £ 63.12 £ 69.61 £ 84.15 £ 12.92 £ 13.97 £ 13.53 £ 31.19 £ 54.00 £ 23.47

www.srmclassicbikes.com

ENGINE SERVICES 2022 PRICE LIST

Price inc.VAT

CYLINDER HEAD SERVICES (continued)

Worn valve guide hole welded andre-machined (each) Lead free valve seats three cylinder (labour) Lead free valve seats twin cylinder (labour) Lead free valve seats four cylinder (labour) Lead free valve seats, BMW, GUZZI pair of heads (labour) Lead free valve seats NORTON twin (labour) NORTON exhaust thread repair (one only) NORTON exhaust thread repair (pair) TRIUMPH exhaust thread repair Convert TRIUMPH push in to push over each (labour) Cast iron headshot blasted & stove enamelled Head assembled single cylinder (labour only) Head assembled twin cylinder (labour only) Head assembled three cylinder (labour only) Head assembled four cylinder (labour only) Gas Flow A65 head to 32mm Bead blast and clean single head Bead blast and clean twin head Bead blast and clean triple head Bead blast and clean TRIUMPH rocker boxes (pair) Bead blast and clean A7/A10 Rocker box Bead blast and polish A50/A65 rocker cover Polish A7/A10Tappet covers (pair)

£ 149.04 £ 138.98 £ 109.15 £ 167.25 £ 141.61 £ 141.61 £ 140.24 £ 210.35 £ 101.13 £ 63.12 £ 107.88 £ 41.56 £ 54.07 £ 86.84 £ 124.56 £ 249.10 £ 54.13 £ 69.61 £ 92.78 £ 37.40 £ 37.40 £ 43.31 £ 20.80

www.srmclassicbikes.com

ENGINE SERVICES 2022 PRICE LIST

GEARBOX SERVICES

PRE UNIT Gearbox rebuild (labour only) Bead blast and clean gearbox shell Bead blast & clean inner gearbox cover Polish outer gearbox cover Clutch actuating arm pivot hole bushed Kickstart/gear shaft machined for o ring BSA A50/A65 Gear change spline repair BSA lay shaft ground & bushes fitted (labour) BSA Main shaft ground and special sleeve gear fitted (labour)

MISCELLANEOUS

Bead blast and clean inner primary cover (pre-unit) Polish outer primary cover Remove engine/ancillaries, Refit after rebuild General work shop service, repairs, restorations per hour

£ 453.60 £ 54.13 £ 34.05 £ 43.31 £ 64.97 £ 23.22 £ 41.78 £ 126.93 £ 90.46 £ 35.07 £ 60.32 £ 648.00 £ 66.00

www.srmclassicbikes.com